2025-03-08 18:42:47.209 - debug: kecontact.0 (118391) UDP datagram from 192.168.5.25:7090: "{"E pres": 31873}"
2025-03-08 18:42:48.714 - debug: kecontact.0 (118391) Sent "report 2" to 192.168.5.25:7090
2025-03-08 18:42:48.716 - debug: kecontact.0 (118391) UDP datagram from 192.168.5.25:7090: "{
"ID": "2",
"State": 3,
"Error1": 0,
"Error2": 0,
"Plug": 7,
"AuthON": 1,
"Authreq": 0,
"Enable sys": 1,
"Enable user": 1,
"Max curr": 16000,
"Max curr %": 266,
"Curr HW": 16000,
"Curr user": 16000,
"Curr FS": 0,
"Tmo FS": 0,
"Curr timer": 16000,
"Tmo CT": 0,
"Setenergy": 0,
"Output": 1,
"Input": 1,
"X2 phaseSwitch source": 4,
"X2 phaseSwitch": 1,
"Serial": "28345628",
"Sec": 1903819
}
"
2025-03-08 18:42:49.015 - debug: kecontact.0 (118391) Sent "report 3" to 192.168.5.25:7090
2025-03-08 18:42:49.017 - debug: kecontact.0 (118391) UDP datagram from 192.168.5.25:7090: "{
"ID": "3",
"U1": 223,
"U2": 226,
"U3": 229,
"I1": 15753,
"I2": 15702,
"I3": 15669,
"P": 10686650,
"PF": 999,
"E pres": 31925,
"E total": 549855,
"Serial": "28345628",
"Sec": 1903819
}
"
2025-03-08 18:42:49.042 - debug: kecontact.0 (118391) UDP datagram from 192.168.5.24:7090: "{"E pres": 25739}"
2025-03-08 18:42:49.043 - debug: kecontact.0 (118391) UDP broadcast datagram from 192.168.5.24:7090: "{"E pres": 25739}"
2025-03-08 18:42:49.047 - debug: kecontact.0 (118391) UDP broadcast datagram from 192.168.5.24:7090: "{"E pres": 25739}"
2025-03-08 18:42:49.084 - debug: kecontact.0 (118391) Search can't be optimized because wildcard not at the end, fallback to keys!: function(doc) { if (doc.type === 'state') emit(doc._id, doc) }
2025-03-08 18:42:49.201 - debug: kecontact.0 (118391) Message from 192.168.5.24 send to kecontact.1
2025-03-08 18:42:49.261 - debug: kecontact.0 (118391) current max current is 16000
2025-03-08 18:42:49.262 - debug: kecontact.0 (118391) amperage of mains: 24910/19560/18470, amperage of charging station: 15753/15702/15669 => available: 22843/28142/29199
2025-03-08 18:42:49.262 - debug: kecontact.0 (118391) Available max amperage: 23000
2025-03-08 18:42:49.262 - debug: kecontact.0 (118391) Available surplus: -3609.9500000000007
2025-03-08 18:42:49.262 - debug: kecontact.0 (118391) pvAutomaticsActive: false, vehicleIsPlugged: true
2025-03-08 18:42:49.262 - debug: kecontact.0 (118391) new current due to vehicle not plugged or pv automatics not active is 16000
2025-03-08 18:42:49.262 - debug: kecontact.0 (118391) wallbox set to charging maximum of 16000 mA
2025-03-08 18:42:49.315 - debug: kecontact.0 (118391) Sent "report 100" to 192.168.5.25:7090
2025-03-08 18:42:49.317 - debug: kecontact.0 (118391) UDP datagram from 192.168.5.25:7090: "{
"ID": "100",
"Session ID": 28,
"Curr HW": 16000,
"E start": 517930,
"E pres": 31931,
"started[s]": 1741452594,
"ended[s]": 0,
"started": "2025-03-08 16:49:54.000",
"ended": "0",
"reason": 5,
"timeQ": 0,
"RFID tag": "043a573aa0169000",
"RFID class": "55d0a976000000000000",
"Serial": "28345628",
"Sec": 1903820
}
"
2025-03-08 18:42:49.317 - debug: kecontact.0 (118391) History ID received: 00
2025-03-08 18:42:50.464 - debug: kecontact.0 (118391) UDP datagram from 192.168.5.25:7090: "{"E pres": 31970}"
2025-03-08 18:42:50.799 - debug: kecontact.0 (118391) UDP datagram from 192.168.5.24:7090: "{
"ID": "2",
"State": 3,
"Error1": 0,
"Error2": 0,
"Plug": 7,
"AuthON": 0,
"Authreq": 0,
"Enable sys": 1,
"Enable user": 1,
"Max curr": 16000,
"Max curr %": 266,
"Curr HW": 16000,
"Curr user": 16000,
"Curr FS": 0,
"Tmo FS": 0,
"Curr timer": 16000,
"Tmo CT": 0,
"Setenergy": 0,
"Output": 0,
"Input": 0,
"X2 phaseSwitch source": 0,
"X2 phaseSwitch": 0,
"Serial": "17405468",
"Sec": 770690
}
"
2025-03-08 18:42:50.801 - debug: kecontact.0 (118391) Search can't be optimized because wildcard not at the end, fallback to keys!: function(doc) { if (doc.type === 'state') emit(doc._id, doc) }
2025-03-08 18:42:50.869 - debug: kecontact.0 (118391) Message from 192.168.5.24 send to kecontact.1
2025-03-08 18:42:51.100 - debug: kecontact.0 (118391) UDP datagram from 192.168.5.24:7090: "{
"ID": "3",
"U1": 223,
"U2": 227,
"U3": 229,
"I1": 6585,
"I2": 6,
"I3": 4,
"P": 1430143,
"PF": 969,
"E pres": 25746,
"E total": 76992007,
"Serial": "17405468",
"Sec": 770691
}
"
2025-03-08 18:42:51.100 - debug: kecontact.0 (118391) Search can't be optimized because wildcard not at the end, fallback to keys!: function(doc) { if (doc.type === 'state') emit(doc._id, doc) }
2025-03-08 18:42:51.126 - debug: kecontact.0 (118391) Message from 192.168.5.24 send to kecontact.1
2025-03-08 18:42:51.401 - debug: kecontact.0 (118391) UDP datagram from 192.168.5.24:7090: "{
"ID": "100",
"Session ID": 2664,
"Curr HW": 16000,
"E start": 76966261,
"E pres": 25747,
"started[s]": 1741452712,
"ended[s]": 0,
"started": "2025-03-08 16:51:52.000",
"ended": "0",
"reason": 5,
"timeQ": 0,
"RFID tag": "0000000000000000",
"RFID class": "00000000000000000000",
"Serial": "17405468",
"Sec": 770691
}
"
2025-03-08 18:42:51.402 - debug: kecontact.0 (118391) Search can't be optimized because wildcard not at the end, fallback to keys!: function(doc) { if (doc.type === 'state') emit(doc._id, doc) }
2025-03-08 18:42:51.469 - debug: kecontact.0 (118391) Message from 192.168.5.24 send to kecontact.1
2025-03-08 18:42:52.025 - debug: kecontact.0 (118391) Sent "report 3" to 192.168.5.25:7090
2025-03-08 18:42:52.027 - debug: kecontact.0 (118391) UDP datagram from 192.168.5.25:7090: "{
"ID": "3",
"U1": 223,
"U2": 226,
"U3": 229,
"I1": 15764,
"I2": 15707,
"I3": 15675,
"P": 10688467,
"PF": 1000,
"E pres": 32016,
"E total": 549946,
"Serial": "28345628",
"Sec": 1903822
}
"
2025-03-08 18:42:52.097 - debug: kecontact.0 (118391) current max current is 16000
2025-03-08 18:42:52.097 - debug: kecontact.0 (118391) amperage of mains: 24350/22400/18510, amperage of charging station: 15764/15707/15675 => available: 23414/25307/29165
2025-03-08 18:42:52.097 - debug: kecontact.0 (118391) Available max amperage: 23500
2025-03-08 18:42:52.097 - debug: kecontact.0 (118391) Available surplus: -3608.133
2025-03-08 18:42:52.324 - debug: kecontact.0 (118391) Sent "report 3" to 192.168.5.25:7090
2025-03-08 18:42:52.326 - debug: kecontact.0 (118391) UDP datagram from 192.168.5.25:7090: "{
"ID": "3",
"U1": 223,
"U2": 226,
"U3": 229,
"I1": 15751,
"I2": 15706,
"I3": 15669,
"P": 10679792,
"PF": 1000,
"E pres": 32022,
"E total": 549952,
"Serial": "28345628",
"Sec": 1903823
}
"
2025-03-08 18:42:52.382 - debug: kecontact.0 (118391) current max current is 16000
2025-03-08 18:42:52.382 - debug: kecontact.0 (118391) amperage of mains: 24350/22400/18510, amperage of charging station: 15751/15706/15669 => available: 23401/25306/29159
2025-03-08 18:42:52.382 - debug: kecontact.0 (118391) Available max amperage: 23500
2025-03-08 18:42:52.383 - debug: kecontact.0 (118391) Available surplus: -4150.408000000001
2025-03-08 18:42:53.936 - debug: kecontact.0 (118391) UDP datagram from 192.168.5.25:7090: "{"E pres": 32073}"
2025-03-08 18:42:57.408 - debug: kecontact.0 (118391) UDP datagram from 192.168.5.25:7090: "{"E pres": 32176}"
2025-03-08 18:43:00.097 - debug: kecontact.0 (118391) set automatic.batteryStorageStrategy to 2
2025-03-08 18:43:00.663 - debug: kecontact.0 (118391) UDP datagram from 192.168.5.25:7090: "{"E pres": 32273}"
2025-03-08 18:43:03.716 - debug: kecontact.0 (118391) Sent "report 2" to 192.168.5.25:7090
2025-03-08 18:43:03.718 - debug: kecontact.0 (118391) UDP datagram from 192.168.5.25:7090: "{
"ID": "2",
"State": 3,
"Error1": 0,
"Error2": 0,
"Plug": 7,
"AuthON": 1,
"Authreq": 0,
"Enable sys": 1,
"Enable user": 1,
"Max curr": 16000,
"Max curr %": 266,
"Curr HW": 16000,
"Curr user": 16000,
"Curr FS": 0,
"Tmo FS": 0,
"Curr timer": 16000,
"Tmo CT": 0,
"Setenergy": 0,
"Output": 1,
"Input": 1,
"X2 phaseSwitch source": 4,
"X2 phaseSwitch": 1,
"Serial": "28345628",
"Sec": 1903834
}
"
2025-03-08 18:43:03.918 - debug: kecontact.0 (118391) UDP datagram from 192.168.5.25:7090: "{"E pres": 32370}"
2025-03-08 18:43:03.962 - info: web.0 (59499) ==> Connected system.user.admin from ::ffff:192.168.5.225
2025-03-08 18:43:04.015 - debug: kecontact.0 (118391) Sent "report 3" to 192.168.5.25:7090
2025-03-08 18:43:04.017 - debug: kecontact.0 (118391) UDP datagram from 192.168.5.25:7090: "{
"ID": "3",
"U1": 223,
"U2": 228,
"U3": 229,
"I1": 15729,
"I2": 15685,
"I3": 15644,
"P": 10688133,
"PF": 1000,
"E pres": 32370,
"E total": 550300,
"Serial": "28345628",
"Sec": 1903834
}
"
2025-03-08 18:43:04.078 - debug: kecontact.0 (118391) current max current is 16000
2025-03-08 18:43:04.078 - debug: kecontact.0 (118391) amperage of mains: 24350/22400/18510, amperage of charging station: 15729/15685/15644 => available: 23379/25285/29134
2025-03-08 18:43:04.078 - debug: kecontact.0 (118391) Available max amperage: 23500
2025-03-08 18:43:04.078 - debug: kecontact.0 (118391) Available surplus: -4142.067000000001
2025-03-08 18:43:04.316 - debug: kecontact.0 (118391) Sent "report 100" to 192.168.5.25:7090
2025-03-08 18:43:04.318 - debug: kecontact.0 (118391) UDP datagram from 192.168.5.25:7090: "{
"ID": "100",
"Session ID": 28,
"Curr HW": 16000,
"E start": 517930,
"E pres": 32376,
"started[s]": 1741452594,
"ended[s]": 0,
"started": "2025-03-08 16:49:54.000",
"ended": "0",
"reason": 5,
"timeQ": 0,
"RFID tag": "043a573aa0169000",
"RFID class": "55d0a976000000000000",
"Serial": "28345628",
"Sec": 1903835
}
"
2025-03-08 18:43:04.318 - debug: kecontact.0 (118391) History ID received: 00
2025-03-08 18:43:05.800 - debug: kecontact.0 (118391) UDP datagram from 192.168.5.24:7090: "{
"ID": "2",
"State": 3,
"Error1": 0,
"Error2": 0,
"Plug": 7,
"AuthON": 0,
"Authreq": 0,
"Enable sys": 1,
"Enable user": 1,
"Max curr": 16000,
"Max curr %": 266,
"Curr HW": 16000,
"Curr user": 16000,
"Curr FS": 0,
"Tmo FS": 0,
"Curr timer": 16000,
"Tmo CT": 0,
"Setenergy": 0,
"Output": 0,
"Input": 0,
"X2 phaseSwitch source": 0,
"X2 phaseSwitch": 0,
"Serial": "17405468",
"Sec": 770705
}
"
2025-03-08 18:43:06.100 - debug: kecontact.0 (118391) UDP datagram from 192.168.5.24:7090: "{
"ID": "3",
"U1": 223,
"U2": 228,
"U3": 229,
"I1": 7170,
"I2": 6,
"I3": 3,
"P": 1557116,
"PF": 969,
"E pres": 25807,
"E total": 76992068,
"Serial": "17405468",
"Sec": 770706
}
"
2025-03-08 18:43:06.328 - debug: kecontact.0 (118391) Search can't be optimized because wildcard not at the end, fallback to keys!: function(doc) { if (doc.type === 'state') emit(doc._id, doc) }
2025-03-08 18:43:06.328 - debug: kecontact.0 (118391) Search can't be optimized because wildcard not at the end, fallback to keys!: function(doc) { if (doc.type === 'state') emit(doc._id, doc) }
2025-03-08 18:43:06.402 - debug: kecontact.0 (118391) UDP datagram from 192.168.5.24:7090: "{
"ID": "100",
"Session ID": 2664,
"Curr HW": 16000,
"E start": 76966261,
"E pres": 25808,
"started[s]": 1741452712,
"ended[s]": 0,
"started": "2025-03-08 16:51:52.000",
"ended": "0",
"reason": 5,
"timeQ": 0,
"RFID tag": "0000000000000000",
"RFID class": "00000000000000000000",
"Serial": "17405468",
"Sec": 770706
}
"
2025-03-08 18:43:06.402 - debug: kecontact.0 (118391) Message from 192.168.5.24 send to kecontact.1
2025-03-08 18:43:06.403 - debug: kecontact.0 (118391) Message from 192.168.5.24 send to kecontact.1
2025-03-08 18:43:06.403 - debug: kecontact.0 (118391) Search can't be optimized because wildcard not at the end, fallback to keys!: function(doc) { if (doc.type === 'state') emit(doc._id, doc) }
2025-03-08 18:43:06.473 - debug: kecontact.0 (118391) Message from 192.168.5.24 send to kecontact.1
2025-03-08 18:43:07.390 - debug: kecontact.0 (118391) UDP datagram from 192.168.5.25:7090: "{"E pres": 32473}"
2025-03-08 18:43:10.862 - debug: kecontact.0 (118391) UDP datagram from 192.168.5.25:7090: "{"E pres": 32576}"
2025-03-08 18:43:13.226 - debug: kecontact.0 (118391) UDP datagram from 192.168.5.24:7090: "{"E pres": 25839}"
2025-03-08 18:43:13.226 - debug: kecontact.0 (118391) UDP broadcast datagram from 192.168.5.24:7090: "{"E pres": 25839}"
2025-03-08 18:43:13.227 - debug: kecontact.0 (118391) Search can't be optimized because wildcard not at the end, fallback to keys!: function(doc) { if (doc.type === 'state') emit(doc._id, doc) }
2025-03-08 18:43:13.251 - debug: kecontact.0 (118391) UDP broadcast datagram from 192.168.5.24:7090: "{"E pres": 25839}"
2025-03-08 18:43:13.305 - debug: kecontact.0 (118391) Message from 192.168.5.24 send to kecontact.1
2025-03-08 18:43:14.117 - debug: kecontact.0 (118391) UDP datagram from 192.168.5.25:7090: "{"E pres": 32672}"
2025-03-08 18:43:17.589 - debug: kecontact.0 (118391) UDP datagram from 192.168.5.25:7090: "{"E pres": 32775}"
2025-03-08 18:43:18.716 - debug: kecontact.0 (118391) Sent "report 2" to 192.168.5.25:7090
2025-03-08 18:43:18.718 - debug: kecontact.0 (118391) UDP datagram from 192.168.5.25:7090: "{
"ID": "2",
"State": 3,
"Error1": 0,
"Error2": 0,
"Plug": 7,
"AuthON": 1,
"Authreq": 0,
"Enable sys": 1,
"Enable user": 1,
"Max curr": 16000,
"Max curr %": 266,
"Curr HW": 16000,
"Curr user": 16000,
"Curr FS": 0,
"Tmo FS": 0,
"Curr timer": 16000,
"Tmo CT": 0,
"Setenergy": 0,
"Output": 1,
"Input": 1,
"X2 phaseSwitch source": 4,
"X2 phaseSwitch": 1,
"Serial": "28345628",
"Sec": 1903849
}
"
2025-03-08 18:43:19.016 - debug: kecontact.0 (118391) Sent "report 3" to 192.168.5.25:7090
2025-03-08 18:43:19.018 - debug: kecontact.0 (118391) UDP datagram from 192.168.5.25:7090: "{
"ID": "3",
"U1": 223,
"U2": 228,
"U3": 228,
"I1": 15749,
"I2": 15705,
"I3": 15663,
"P": 10687337,
"PF": 1000,
"E pres": 32814,
"E total": 550744,
"Serial": "28345628",
"Sec": 1903849
}
"
2025-03-08 18:43:19.082 - debug: kecontact.0 (118391) current max current is 16000
2025-03-08 18:43:19.082 - debug: kecontact.0 (118391) amperage of mains: 24780/20840/18430, amperage of charging station: 15749/15705/15663 => available: 22969/26865/29233
2025-03-08 18:43:19.082 - debug: kecontact.0 (118391) Available max amperage: 23000
2025-03-08 18:43:19.082 - debug: kecontact.0 (118391) Available surplus: -3875.1630000000005
2025-03-08 18:43:19.082 - debug: kecontact.0 (118391) pvAutomaticsActive: false, vehicleIsPlugged: true
2025-03-08 18:43:19.082 - debug: kecontact.0 (118391) new current due to vehicle not plugged or pv automatics not active is 16000
2025-03-08 18:43:19.082 - debug: kecontact.0 (118391) wallbox set to charging maximum of 16000 mA
2025-03-08 18:43:19.316 - debug: kecontact.0 (118391) Sent "report 100" to 192.168.5.25:7090
2025-03-08 18:43:19.318 - debug: kecontact.0 (118391) UDP datagram from 192.168.5.25:7090: "{
"ID": "100",
"Session ID": 28,
"Curr HW": 16000,
"E start": 517930,
"E pres": 32827,
"started[s]": 1741452594,
"ended[s]": 0,
"started": "2025-03-08 16:49:54.000",
"ended": "0",
"reason": 5,
"timeQ": 0,
"RFID tag": "043a573aa0169000",
"RFID class": "55d0a976000000000000",
"Serial": "28345628",
"Sec": 1903850
}
"
2025-03-08 18:43:19.318 - debug: kecontact.0 (118391) History ID received: 00
2025-03-08 18:43:20.800 - debug: kecontact.0 (118391) UDP datagram from 192.168.5.24:7090: "{
"ID": "2",
"State": 3,
"Error1": 0,
"Error2": 0,
"Plug": 7,
"AuthON": 0,
"Authreq": 0,
"Enable sys": 1,
"Enable user": 1,
"Max curr": 16000,
"Max curr %": 266,
"Curr HW": 16000,
"Curr user": 16000,
"Curr FS": 0,
"Tmo FS": 0,
"Curr timer": 16000,
"Tmo CT": 0,
"Setenergy": 0,
"Output": 0,
"Input": 0,
"X2 phaseSwitch source": 0,
"X2 phaseSwitch": 0,
"Serial": "17405468",
"Sec": 770720
}
"
2025-03-08 18:43:20.803 - debug: kecontact.0 (118391) Search can't be optimized because wildcard not at the end, fallback to keys!: function(doc) { if (doc.type === 'state') emit(doc._id, doc) }
2025-03-08 18:43:20.844 - debug: kecontact.0 (118391) UDP datagram from 192.168.5.25:7090: "{"E pres": 32872}"
2025-03-08 18:43:20.845 - debug: kecontact.0 (118391) Message from 192.168.5.24 send to kecontact.1
2025-03-08 18:43:21.100 - debug: kecontact.0 (118391) UDP datagram from 192.168.5.24:7090: "{
"ID": "3",
"U1": 223,
"U2": 228,
"U3": 228,
"I1": 7118,
"I2": 6,
"I3": 3,
"P": 1544230,
"PF": 970,
"E pres": 25872,
"E total": 76992133,
"Serial": "17405468",
"Sec": 770721
}
"
2025-03-08 18:43:21.101 - debug: kecontact.0 (118391) Search can't be optimized because wildcard not at the end, fallback to keys!: function(doc) { if (doc.type === 'state') emit(doc._id, doc) }
2025-03-08 18:43:21.165 - debug: kecontact.0 (118391) Message from 192.168.5.24 send to kecontact.1
2025-03-08 18:43:21.399 - debug: kecontact.0 (118391) UDP datagram from 192.168.5.24:7090: "{
"ID": "100",
"Session ID": 2664,
"Curr HW": 16000,
"E start": 76966261,
"E pres": 25873,
"started[s]": 1741452712,
"ended[s]": 0,
"started": "2025-03-08 16:51:52.000",
"ended": "0",
"reason": 5,
"timeQ": 0,
"RFID tag": "0000000000000000",
"RFID class": "00000000000000000000",
"Serial": "17405468",
"Sec": 770721
}
"
2025-03-08 18:43:21.400 - debug: kecontact.0 (118391) Search can't be optimized because wildcard not at the end, fallback to keys!: function(doc) { if (doc.type === 'state') emit(doc._id, doc) }
2025-03-08 18:43:21.465 - debug: kecontact.0 (118391) Message from 192.168.5.24 send to kecontact.1
2025-03-08 18:43:24.316 - debug: kecontact.0 (118391) UDP datagram from 192.168.5.25:7090: "{"E pres": 32975}"
2025-03-08 18:43:27.574 - debug: kecontact.0 (118391) UDP datagram from 192.168.5.25:7090: "{"E pres": 33072}"
2025-03-08 18:43:31.043 - debug: kecontact.0 (118391) UDP datagram from 192.168.5.25:7090: "{"E pres": 33174}"
2025-03-08 18:43:33.716 - debug: kecontact.0 (118391) Sent "report 2" to 192.168.5.25:7090
2025-03-08 18:43:33.718 - debug: kecontact.0 (118391) UDP datagram from 192.168.5.25:7090: "{
"ID": "2",
"State": 3,
"Error1": 0,
"Error2": 0,
"Plug": 7,
"AuthON": 1,
"Authreq": 0,
"Enable sys": 1,
"Enable user": 1,
"Max curr": 16000,
"Max curr %": 266,
"Curr HW": 16000,
"Curr user": 16000,
"Curr FS": 0,
"Tmo FS": 0,
"Curr timer": 16000,
"Tmo CT": 0,
"Setenergy": 0,
"Output": 1,
"Input": 1,
"X2 phaseSwitch source": 4,
"X2 phaseSwitch": 1,
"Serial": "28345628",
"Sec": 1903864
}
"
2025-03-08 18:43:34.016 - debug: kecontact.0 (118391) Sent "report 3" to 192.168.5.25:7090
2025-03-08 18:43:34.018 - debug: kecontact.0 (118391) UDP datagram from 192.168.5.25:7090: "{
"ID": "3",
"U1": 223,
"U2": 227,
"U3": 228,
"I1": 15785,
"I2": 15747,
"I3": 15712,
"P": 10680216,
"PF": 999,
"E pres": 33257,
"E total": 551187,
"Serial": "28345628",
"Sec": 1903864
}
"
2025-03-08 18:43:34.080 - debug: kecontact.0 (118391) current max current is 16000
2025-03-08 18:43:34.081 - debug: kecontact.0 (118391) amperage of mains: 24840/19070/18440, amperage of charging station: 15785/15747/15712 => available: 22945/28677/29272
2025-03-08 18:43:34.081 - debug: kecontact.0 (118391) Available max amperage: 23000
2025-03-08 18:43:34.081 - debug: kecontact.0 (118391) Available surplus: -3470.9840000000004
2025-03-08 18:43:34.298 - debug: kecontact.0 (118391) UDP datagram from 192.168.5.25:7090: "{"E pres": 33272}"
2025-03-08 18:43:34.317 - debug: kecontact.0 (118391) Sent "report 100" to 192.168.5.25:7090
2025-03-08 18:43:34.319 - debug: kecontact.0 (118391) UDP datagram from 192.168.5.25:7090: "{
"ID": "100",
"Session ID": 28,
"Curr HW": 16000,
"E start": 517930,
"E pres": 33272,
"started[s]": 1741452594,
"ended[s]": 0,
"started": "2025-03-08 16:49:54.000",
"ended": "0",
"reason": 5,
"timeQ": 0,
"RFID tag": "043a573aa0169000",
"RFID class": "55d0a976000000000000",
"Serial": "28345628",
"Sec": 1903865
}
"
2025-03-08 18:43:34.319 - debug: kecontact.0 (118391) History ID received: 00
2025-03-08 18:43:35.800 - debug: kecontact.0 (118391) UDP datagram from 192.168.5.24:7090: "{
"ID": "2",
"State": 3,
"Error1": 0,
"Error2": 0,
"Plug": 7,
"AuthON": 0,
"Authreq": 0,
"Enable sys": 1,
"Enable user": 1,
"Max curr": 16000,
"Max curr %": 266,
"Curr HW": 16000,
"Curr user": 16000,
"Curr FS": 0,
"Tmo FS": 0,
"Curr timer": 16000,
"Tmo CT": 0,
"Setenergy": 0,
"Output": 0,
"Input": 0,
"X2 phaseSwitch source": 0,
"X2 phaseSwitch": 0,
"Serial": "17405468",
"Sec": 770735
}
"
2025-03-08 18:43:35.808 - debug: kecontact.0 (118391) Search can't be optimized because wildcard not at the end, fallback to keys!: function(doc) { if (doc.type === 'state') emit(doc._id, doc) }
2025-03-08 18:43:35.885 - debug: kecontact.0 (118391) Message from 192.168.5.24 send to kecontact.1
2025-03-08 18:43:36.101 - debug: kecontact.0 (118391) UDP datagram from 192.168.5.24:7090: "{
"ID": "3",
"U1": 222,
"U2": 227,
"U3": 227,
"I1": 7257,
"I2": 5,
"I3": 4,
"P": 1565862,
"PF": 966,
"E pres": 25937,
"E total": 76992198,
"Serial": "17405468",
"Sec": 770736
}
"
2025-03-08 18:43:36.102 - debug: kecontact.0 (118391) Search can't be optimized because wildcard not at the end, fallback to keys!: function(doc) { if (doc.type === 'state') emit(doc._id, doc) }
2025-03-08 18:43:36.169 - debug: kecontact.0 (118391) Message from 192.168.5.24 send to kecontact.1
2025-03-08 18:43:36.401 - debug: kecontact.0 (118391) UDP datagram from 192.168.5.24:7090: "{
"ID": "100",
"Session ID": 2664,
"Curr HW": 16000,
"E start": 76966261,
"E pres": 25938,
"started[s]": 1741452712,
"ended[s]": 0,
"started": "2025-03-08 16:51:52.000",
"ended": "0",
"reason": 5,
"timeQ": 0,
"RFID tag": "0000000000000000",
"RFID class": "00000000000000000000",
"Serial": "17405468",
"Sec": 770736
}
"
2025-03-08 18:43:36.402 - debug: kecontact.0 (118391) Search can't be optimized because wildcard not at the end, fallback to keys!: function(doc) { if (doc.type === 'state') emit(doc._id, doc) }
2025-03-08 18:43:36.469 - debug: kecontact.0 (118391) Message from 192.168.5.24 send to kecontact.1
2025-03-08 18:43:36.615 - debug: kecontact.0 (118391) UDP datagram from 192.168.5.24:7090: "{"E pres": 25940}"
2025-03-08 18:43:36.616 - debug: kecontact.0 (118391) UDP broadcast datagram from 192.168.5.24:7090: "{"E pres": 25940}"
2025-03-08 18:43:36.616 - debug: kecontact.0 (118391) Search can't be optimized because wildcard not at the end, fallback to keys!: function(doc) { if (doc.type === 'state') emit(doc._id, doc) }
2025-03-08 18:43:36.624 - debug: kecontact.0 (118391) UDP broadcast datagram from 192.168.5.24:7090: "{"E pres": 25940}"
2025-03-08 18:43:36.685 - debug: kecontact.0 (118391) Message from 192.168.5.24 send to kecontact.1
2025-03-08 18:43:37.770 - debug: kecontact.0 (118391) UDP datagram from 192.168.5.25:7090: "{"E pres": 33374}"
2025-03-08 18:43:41.025 - debug: kecontact.0 (118391) UDP datagram from 192.168.5.25:7090: "{"E pres": 33472}"
2025-03-08 18:43:44.497 - debug: kecontact.0 (118391) UDP datagram from 192.168.5.25:7090: "{"E pres": 33574}"
2025-03-08 18:43:47.752 - debug: kecontact.0 (118391) UDP datagram from 192.168.5.25:7090: "{"E pres": 33672}"
2025-03-08 18:43:48.716 - debug: kecontact.0 (118391) Sent "report 2" to 192.168.5.25:7090
2025-03-08 18:43:48.718 - debug: kecontact.0 (118391) UDP datagram from 192.168.5.25:7090: "{
"ID": "2",
"State": 3,
"Error1": 0,
"Error2": 0,
"Plug": 7,
"AuthON": 1,
"Authreq": 0,
"Enable sys": 1,
"Enable user": 1,
"Max curr": 16000,
"Max curr %": 266,
"Curr HW": 16000,
"Curr user": 16000,
"Curr FS": 0,
"Tmo FS": 0,
"Curr timer": 16000,
"Tmo CT": 0,
"Setenergy": 0,
"Output": 1,
"Input": 1,
"X2 phaseSwitch source": 4,
"X2 phaseSwitch": 1,
"Serial": "28345628",
"Sec": 1903879
}
"
2025-03-08 18:43:49.015 - debug: kecontact.0 (118391) Sent "report 3" to 192.168.5.25:7090
2025-03-08 18:43:49.017 - debug: kecontact.0 (118391) UDP datagram from 192.168.5.25:7090: "{
"ID": "3",
"U1": 223,
"U2": 227,
"U3": 227,
"I1": 15793,
"I2": 15750,
"I3": 15708,
"P": 10682393,
"PF": 999,
"E pres": 33702,
"E total": 551632,
"Serial": "28345628",
"Sec": 1903879
}
"
2025-03-08 18:43:49.083 - debug: kecontact.0 (118391) current max current is 16000
2025-03-08 18:43:49.083 - debug: kecontact.0 (118391) amperage of mains: 24910/19260/18490, amperage of charging station: 15793/15750/15708 => available: 22883/28490/29218
2025-03-08 18:43:49.083 - debug: kecontact.0 (118391) Available max amperage: 23000
2025-03-08 18:43:49.083 - debug: kecontact.0 (118391) Available surplus: -3503.3070000000007
2025-03-08 18:43:49.083 - debug: kecontact.0 (118391) pvAutomaticsActive: false, vehicleIsPlugged: true
2025-03-08 18:43:49.083 - debug: kecontact.0 (118391) new current due to vehicle not plugged or pv automatics not active is 16000
2025-03-08 18:43:49.083 - debug: kecontact.0 (118391) wallbox set to charging maximum of 16000 mA
2025-03-08 18:43:49.315 - debug: kecontact.0 (118391) Sent "report 100" to 192.168.5.25:7090
2025-03-08 18:43:49.317 - debug: kecontact.0 (118391) UDP datagram from 192.168.5.25:7090: "{
"ID": "100",
"Session ID": 28,
"Curr HW": 16000,
"E start": 517930,
"E pres": 33716,
"started[s]": 1741452594,
"ended[s]": 0,
"started": "2025-03-08 16:49:54.000",
"ended": "0",
"reason": 5,
"timeQ": 0,
"RFID tag": "043a573aa0169000",
"RFID class": "55d0a976000000000000",
"Serial": "28345628",
"Sec": 1903880
}
"
2025-03-08 18:43:49.317 - debug: kecontact.0 (118391) History ID received: 00
2025-03-08 18:43:50.802 - debug: kecontact.0 (118391) UDP datagram from 192.168.5.24:7090: "{
"ID": "2",
"State": 3,
"Error1": 0,
"Error2": 0,
"Plug": 7,
"AuthON": 0,
"Authreq": 0,
"Enable sys": 1,
"Enable user": 1,
"Max curr": 16000,
"Max curr %": 266,
"Curr HW": 16000,
"Curr user": 16000,
"Curr FS": 0,
"Tmo FS": 0,
"Curr timer": 16000,
"Tmo CT": 0,
"Setenergy": 0,
"Output": 0,
"Input": 0,
"X2 phaseSwitch source": 0,
"X2 phaseSwitch": 0,
"Serial": "17405468",
"Sec": 770750
}
"
2025-03-08 18:43:50.803 - debug: kecontact.0 (118391) Search can't be optimized because wildcard not at the end, fallback to keys!: function(doc) { if (doc.type === 'state') emit(doc._id, doc) }
2025-03-08 18:43:50.869 - debug: kecontact.0 (118391) Message from 192.168.5.24 send to kecontact.1
2025-03-08 18:43:51.102 - debug: kecontact.0 (118391) UDP datagram from 192.168.5.24:7090: "{
"ID": "3",
"U1": 223,
"U2": 227,
"U3": 228,
"I1": 6638,
"I2": 5,
"I3": 4,
"P": 1439707,
"PF": 969,
"E pres": 25998,
"E total": 76992259,
"Serial": "17405468",
"Sec": 770751
}
"
2025-03-08 18:43:51.103 - debug: kecontact.0 (118391) Search can't be optimized because wildcard not at the end, fallback to keys!: function(doc) { if (doc.type === 'state') emit(doc._id, doc) }
2025-03-08 18:43:51.169 - debug: kecontact.0 (118391) Message from 192.168.5.24 send to kecontact.1
2025-03-08 18:43:51.224 - debug: kecontact.0 (118391) UDP datagram from 192.168.5.25:7090: "{"E pres": 33774}"
2025-03-08 18:43:51.402 - debug: kecontact.0 (118391) UDP datagram from 192.168.5.24:7090: "{
"ID": "100",
"Session ID": 2664,
"Curr HW": 16000,
"E start": 76966261,
"E pres": 25999,
"started[s]": 1741452712,
"ended[s]": 0,
"started": "2025-03-08 16:51:52.000",
"ended": "0",
"reason": 5,
"timeQ": 0,
"RFID tag": "0000000000000000",
"RFID class": "00000000000000000000",
"Serial": "17405468",
"Sec": 770751
}
"
2025-03-08 18:43:51.402 - debug: kecontact.0 (118391) Search can't be optimized because wildcard not at the end, fallback to keys!: function(doc) { if (doc.type === 'state') emit(doc._id, doc) }
2025-03-08 18:43:51.469 - debug: kecontact.0 (118391) Message from 192.168.5.24 send to kecontact.1
2025-03-08 18:43:54.479 - debug: kecontact.0 (118391) UDP datagram from 192.168.5.25:7090: "{"E pres": 33871}"
2025-03-08 18:43:57.951 - debug: kecontact.0 (118391) UDP datagram from 192.168.5.25:7090: "{"E pres": 33973}"
2025-03-08 18:44:00.093 - debug: kecontact.0 (118391) set automatic.batteryStorageStrategy to 2
2025-03-08 18:44:01.206 - debug: kecontact.0 (118391) UDP datagram from 192.168.5.25:7090: "{"E pres": 34070}"
2025-03-08 18:44:01.682 - debug: kecontact.0 (118391) UDP datagram from 192.168.5.24:7090: "{"E pres": 26040}"
2025-03-08 18:44:01.683 - debug: kecontact.0 (118391) UDP broadcast datagram from 192.168.5.24:7090: "{"E pres": 26040}"
2025-03-08 18:44:01.683 - debug: kecontact.0 (118391) Search can't be optimized because wildcard not at the end, fallback to keys!: function(doc) { if (doc.type === 'state') emit(doc._id, doc) }
2025-03-08 18:44:01.684 - debug: kecontact.0 (118391) UDP broadcast datagram from 192.168.5.24:7090: "{"E pres": 26040}"
2025-03-08 18:44:01.757 - debug: kecontact.0 (118391) Message from 192.168.5.24 send to kecontact.1
2025-03-08 18:44:03.716 - debug: kecontact.0 (118391) Sent "report 2" to 192.168.5.25:7090
2025-03-08 18:44:03.718 - debug: kecontact.0 (118391) UDP datagram from 192.168.5.25:7090: "{
"ID": "2",
"State": 3,
"Error1": 0,
"Error2": 0,
"Plug": 7,
"AuthON": 1,
"Authreq": 0,
"Enable sys": 1,
"Enable user": 1,
"Max curr": 16000,
"Max curr %": 266,
"Curr HW": 16000,
"Curr user": 16000,
"Curr FS": 0,
"Tmo FS": 0,
"Curr timer": 16000,
"Tmo CT": 0,
"Setenergy": 0,
"Output": 1,
"Input": 1,
"X2 phaseSwitch source": 4,
"X2 phaseSwitch": 1,
"Serial": "28345628",
"Sec": 1903894
}
"
2025-03-08 18:44:04.016 - debug: kecontact.0 (118391) Sent "report 3" to 192.168.5.25:7090
2025-03-08 18:44:04.018 - debug: kecontact.0 (118391) UDP datagram from 192.168.5.25:7090: "{
"ID": "3",
"U1": 222,
"U2": 227,
"U3": 228,
"I1": 15805,
"I2": 15762,
"I3": 15727,
"P": 10685847,
"PF": 999,
"E pres": 34148,
"E total": 552078,
"Serial": "28345628",
"Sec": 1903894
}
"
2025-03-08 18:44:04.082 - debug: kecontact.0 (118391) current max current is 16000
2025-03-08 18:44:04.083 - debug: kecontact.0 (118391) amperage of mains: 24410/19140/18500, amperage of charging station: 15805/15762/15727 => available: 23395/28622/29227
2025-03-08 18:44:04.083 - debug: kecontact.0 (118391) Available max amperage: 23500
2025-03-08 18:44:04.083 - debug: kecontact.0 (118391) Available surplus: -3375.353000000001
2025-03-08 18:44:04.317 - debug: kecontact.0 (118391) Sent "report 100" to 192.168.5.25:7090
2025-03-08 18:44:04.319 - debug: kecontact.0 (118391) UDP datagram from 192.168.5.25:7090: "{
"ID": "100",
"Session ID": 28,
"Curr HW": 16000,
"E start": 517930,
"E pres": 34161,
"started[s]": 1741452594,
"ended[s]": 0,
"started": "2025-03-08 16:49:54.000",
"ended": "0",
"reason": 5,
"timeQ": 0,
"RFID tag": "043a573aa0169000",
"RFID class": "55d0a976000000000000",
"Serial": "28345628",
"Sec": 1903895
}
"
2025-03-08 18:44:04.319 - debug: kecontact.0 (118391) History ID received: 00
2025-03-08 18:44:04.678 - debug: kecontact.0 (118391) UDP datagram from 192.168.5.25:7090: "{"E pres": 34173}"
2025-03-08 18:44:05.802 - debug: kecontact.0 (118391) UDP datagram from 192.168.5.24:7090: "{
"ID": "2",
"State": 3,
"Error1": 0,
"Error2": 0,
"Plug": 7,
"AuthON": 0,
"Authreq": 0,
"Enable sys": 1,
"Enable user": 1,
"Max curr": 16000,
"Max curr %": 266,
"Curr HW": 16000,
"Curr user": 16000,
"Curr FS": 0,
"Tmo FS": 0,
"Curr timer": 16000,
"Tmo CT": 0,
"Setenergy": 0,
"Output": 0,
"Input": 0,
"X2 phaseSwitch source": 0,
"X2 phaseSwitch": 0,
"Serial": "17405468",
"Sec": 770765
}
"
2025-03-08 18:44:05.805 - debug: kecontact.0 (118391) Search can't be optimized because wildcard not at the end, fallback to keys!: function(doc) { if (doc.type === 'state') emit(doc._id, doc) }
2025-03-08 18:44:05.881 - debug: kecontact.0 (118391) Message from 192.168.5.24 send to kecontact.1
2025-03-08 18:44:06.101 - debug: kecontact.0 (118391) UDP datagram from 192.168.5.24:7090: "{
"ID": "3",
"U1": 222,
"U2": 227,
"U3": 228,
"I1": 6631,
"I2": 5,
"I3": 5,
"P": 1432636,
"PF": 969,
"E pres": 26057,
"E total": 76992318,
"Serial": "17405468",
"Sec": 770766
}
"
2025-03-08 18:44:06.102 - debug: kecontact.0 (118391) Search can't be optimized because wildcard not at the end, fallback to keys!: function(doc) { if (doc.type === 'state') emit(doc._id, doc) }
2025-03-08 18:44:06.173 - debug: kecontact.0 (118391) Message from 192.168.5.24 send to kecontact.1
2025-03-08 18:44:06.402 - debug: kecontact.0 (118391) UDP datagram from 192.168.5.24:7090: "{
"ID": "100",
"Session ID": 2664,
"Curr HW": 16000,
"E start": 76966261,
"E pres": 26059,
"started[s]": 1741452712,
"ended[s]": 0,
"started": "2025-03-08 16:51:52.000",
"ended": "0",
"reason": 5,
"timeQ": 0,
"RFID tag": "0000000000000000",
"RFID class": "00000000000000000000",
"Serial": "17405468",
"Sec": 770766
}
"
2025-03-08 18:44:06.403 - debug: kecontact.0 (118391) Search can't be optimized because wildcard not at the end, fallback to keys!: function(doc) { if (doc.type === 'state') emit(doc._id, doc) }
2025-03-08 18:44:06.481 - debug: kecontact.0 (118391) Message from 192.168.5.24 send to kecontact.1
2025-03-08 18:44:07.934 - debug: kecontact.0 (118391) UDP datagram from 192.168.5.25:7090: "{"E pres": 34270}"
2025-03-08 18:44:11.406 - debug: kecontact.0 (118391) UDP datagram from 192.168.5.25:7090: "{"E pres": 34373}"
2025-03-08 18:44:14.661 - debug: kecontact.0 (118391) UDP datagram from 192.168.5.25:7090: "{"E pres": 34471}"
2025-03-08 18:44:18.133 - debug: kecontact.0 (118391) UDP datagram from 192.168.5.25:7090: "{"E pres": 34573}"
2025-03-08 18:44:18.716 - debug: kecontact.0 (118391) Sent "report 2" to 192.168.5.25:7090
2025-03-08 18:44:18.718 - debug: kecontact.0 (118391) UDP datagram from 192.168.5.25:7090: "{
"ID": "2",
"State": 3,
"Error1": 0,
"Error2": 0,
"Plug": 7,
"AuthON": 1,
"Authreq": 0,
"Enable sys": 1,
"Enable user": 1,
"Max curr": 16000,
"Max curr %": 266,
"Curr HW": 16000,
"Curr user": 16000,
"Curr FS": 0,
"Tmo FS": 0,
"Curr timer": 16000,
"Tmo CT": 0,
"Setenergy": 0,
"Output": 1,
"Input": 1,
"X2 phaseSwitch source": 4,
"X2 phaseSwitch": 1,
"Serial": "28345628",
"Sec": 1903909
}
"
2025-03-08 18:44:19.016 - debug: kecontact.0 (118391) Sent "report 3" to 192.168.5.25:7090
2025-03-08 18:44:19.018 - debug: kecontact.0 (118391) UDP datagram from 192.168.5.25:7090: "{
"ID": "3",
"U1": 223,
"U2": 228,
"U3": 228,
"I1": 15758,
"I2": 15721,
"I3": 15670,
"P": 10693687,
"PF": 1000,
"E pres": 34599,
"E total": 552529,
"Serial": "28345628",
"Sec": 1903909
}
"
2025-03-08 18:44:19.080 - debug: kecontact.0 (118391) current max current is 16000
2025-03-08 18:44:19.080 - debug: kecontact.0 (118391) amperage of mains: 24330/19120/18260, amperage of charging station: 15758/15721/15670 => available: 23428/28601/29410
2025-03-08 18:44:19.080 - debug: kecontact.0 (118391) Available max amperage: 23500
2025-03-08 18:44:19.080 - debug: kecontact.0 (118391) Available surplus: -3270.813
2025-03-08 18:44:19.080 - debug: kecontact.0 (118391) pvAutomaticsActive: false, vehicleIsPlugged: true
2025-03-08 18:44:19.080 - debug: kecontact.0 (118391) new current due to vehicle not plugged or pv automatics not active is 16000
2025-03-08 18:44:19.080 - debug: kecontact.0 (118391) wallbox set to charging maximum of 16000 mA
2025-03-08 18:44:19.317 - debug: kecontact.0 (118391) Sent "report 100" to 192.168.5.25:7090
2025-03-08 18:44:19.319 - debug: kecontact.0 (118391) UDP datagram from 192.168.5.25:7090: "{
"ID": "100",
"Session ID": 28,
"Curr HW": 16000,
"E start": 517930,
"E pres": 34605,
"started[s]": 1741452594,
"ended[s]": 0,
"started": "2025-03-08 16:49:54.000",
"ended": "0",
"reason": 5,
"timeQ": 0,
"RFID tag": "043a573aa0169000",
"RFID class": "55d0a976000000000000",
"Serial": "28345628",
"Sec": 1903910
}
"
2025-03-08 18:44:19.319 - debug: kecontact.0 (118391) History ID received: 00
2025-03-08 18:44:20.802 - debug: kecontact.0 (118391) UDP datagram from 192.168.5.24:7090: "{
"ID": "2",
"State": 3,
"Error1": 0,
"Error2": 0,
"Plug": 7,
"AuthON": 0,
"Authreq": 0,
"Enable sys": 1,
"Enable user": 1,
"Max curr": 16000,
"Max curr %": 266,
"Curr HW": 16000,
"Curr user": 16000,
"Curr FS": 0,
"Tmo FS": 0,
"Curr timer": 16000,
"Tmo CT": 0,
"Setenergy": 0,
"Output": 0,
"Input": 0,
"X2 phaseSwitch source": 0,
"X2 phaseSwitch": 0,
"Serial": "17405468",
"Sec": 770780
}
"
2025-03-08 18:44:20.804 - debug: kecontact.0 (118391) Search can't be optimized because wildcard not at the end, fallback to keys!: function(doc) { if (doc.type === 'state') emit(doc._id, doc) }
2025-03-08 18:44:20.869 - debug: kecontact.0 (118391) Message from 192.168.5.24 send to kecontact.1
2025-03-08 18:44:21.102 - debug: kecontact.0 (118391) UDP datagram from 192.168.5.24:7090: "{
"ID": "3",
"U1": 222,
"U2": 228,
"U3": 228,
"I1": 6584,
"I2": 5,
"I3": 3,
"P": 1425386,
"PF": 969,
"E pres": 26116,
"E total": 76992377,
"Serial": "17405468",
"Sec": 770781
}
"
2025-03-08 18:44:21.102 - debug: kecontact.0 (118391) Search can't be optimized because wildcard not at the end, fallback to keys!: function(doc) { if (doc.type === 'state') emit(doc._id, doc) }
2025-03-08 18:44:21.169 - debug: kecontact.0 (118391) Message from 192.168.5.24 send to kecontact.1
2025-03-08 18:44:21.388 - debug: kecontact.0 (118391) UDP datagram from 192.168.5.25:7090: "{"E pres": 34670}"
2025-03-08 18:44:21.403 - debug: kecontact.0 (118391) UDP datagram from 192.168.5.24:7090: "{
"ID": "100",
"Session ID": 2664,
"Curr HW": 16000,
"E start": 76966261,
"E pres": 26117,
"started[s]": 1741452712,
"ended[s]": 0,
"started": "2025-03-08 16:51:52.000",
"ended": "0",
"reason": 5,
"timeQ": 0,
"RFID tag": "0000000000000000",
"RFID class": "00000000000000000000",
"Serial": "17405468",
"Sec": 770781
}
"
2025-03-08 18:44:21.444 - debug: kecontact.0 (118391) Search can't be optimized because wildcard not at the end, fallback to keys!: function(doc) { if (doc.type === 'state') emit(doc._id, doc) }
2025-03-08 18:44:21.512 - debug: kecontact.0 (118391) Message from 192.168.5.24 send to kecontact.1
2025-03-08 18:44:24.860 - debug: kecontact.0 (118391) UDP datagram from 192.168.5.25:7090: "{"E pres": 34772}"
2025-03-08 18:44:26.451 - debug: kecontact.0 (118391) UDP datagram from 192.168.5.24:7090: "{"E pres": 26139}"
2025-03-08 18:44:26.452 - debug: kecontact.0 (118391) UDP broadcast datagram from 192.168.5.24:7090: "{"E pres": 26139}"
2025-03-08 18:44:26.453 - debug: kecontact.0 (118391) Search can't be optimized because wildcard not at the end, fallback to keys!: function(doc) { if (doc.type === 'state') emit(doc._id, doc) }
2025-03-08 18:44:26.456 - debug: kecontact.0 (118391) UDP broadcast datagram from 192.168.5.24:7090: "{"E pres": 26139}"
2025-03-08 18:44:26.529 - debug: kecontact.0 (118391) Message from 192.168.5.24 send to kecontact.1
2025-03-08 18:44:28.115 - debug: kecontact.0 (118391) UDP datagram from 192.168.5.25:7090: "{"E pres": 34870}"
2025-03-08 18:44:31.587 - debug: kecontact.0 (118391) UDP datagram from 192.168.5.25:7090: "{"E pres": 34972}"
2025-03-08 18:44:33.716 - debug: kecontact.0 (118391) Sent "report 2" to 192.168.5.25:7090
2025-03-08 18:44:33.718 - debug: kecontact.0 (118391) UDP datagram from 192.168.5.25:7090: "{
"ID": "2",
"State": 3,
"Error1": 0,
"Error2": 0,
"Plug": 7,
"AuthON": 1,
"Authreq": 0,
"Enable sys": 1,
"Enable user": 1,
"Max curr": 16000,
"Max curr %": 266,
"Curr HW": 16000,
"Curr user": 16000,
"Curr FS": 0,
"Tmo FS": 0,
"Curr timer": 16000,
"Tmo CT": 0,
"Setenergy": 0,
"Output": 1,
"Input": 1,
"X2 phaseSwitch source": 4,
"X2 phaseSwitch": 1,
"Serial": "28345628",
"Sec": 1903924
}
"
2025-03-08 18:44:34.016 - debug: kecontact.0 (118391) Sent "report 3" to 192.168.5.25:7090
2025-03-08 18:44:34.018 - debug: kecontact.0 (118391) UDP datagram from 192.168.5.25:7090: "{
"ID": "3",
"U1": 224,
"U2": 228,
"U3": 229,
"I1": 15725,
"I2": 15680,
"I3": 15660,
"P": 10713135,
"PF": 999,
"E pres": 35043,
"E total": 552973,
"Serial": "28345628",
"Sec": 1903924
}
"
2025-03-08 18:44:34.081 - debug: kecontact.0 (118391) current max current is 16000
2025-03-08 18:44:34.081 - debug: kecontact.0 (118391) amperage of mains: 24300/19100/18220, amperage of charging station: 15725/15680/15660 => available: 23425/28580/29440
2025-03-08 18:44:34.082 - debug: kecontact.0 (118391) Available max amperage: 23500
2025-03-08 18:44:34.082 - debug: kecontact.0 (118391) Available surplus: -3270.465
2025-03-08 18:44:34.315 - debug: kecontact.0 (118391) Sent "report 100" to 192.168.5.25:7090
2025-03-08 18:44:34.317 - debug: kecontact.0 (118391) UDP datagram from 192.168.5.25:7090: "{
"ID": "100",
"Session ID": 28,
"Curr HW": 16000,
"E start": 517930,
"E pres": 35049,
"started[s]": 1741452594,
"ended[s]": 0,
"started": "2025-03-08 16:49:54.000",
"ended": "0",
"reason": 5,
"timeQ": 0,
"RFID tag": "043a573aa0169000",
"RFID class": "55d0a976000000000000",
"Serial": "28345628",
"Sec": 1903925
}
"
2025-03-08 18:44:34.317 - debug: kecontact.0 (118391) History ID received: 00
2025-03-08 18:44:34.841 - debug: kecontact.0 (118391) UDP datagram from 192.168.5.25:7090: "{"E pres": 35070}"
2025-03-08 18:44:35.802 - debug: kecontact.0 (118391) UDP datagram from 192.168.5.24:7090: "{
"ID": "2",
"State": 3,
"Error1": 0,
"Error2": 0,
"Plug": 7,
"AuthON": 0,
"Authreq": 0,
"Enable sys": 1,
"Enable user": 1,
"Max curr": 16000,
"Max curr %": 266,
"Curr HW": 16000,
"Curr user": 16000,
"Curr FS": 0,
"Tmo FS": 0,
"Curr timer": 16000,
"Tmo CT": 0,
"Setenergy": 0,
"Output": 0,
"Input": 0,
"X2 phaseSwitch source": 0,
"X2 phaseSwitch": 0,
"Serial": "17405468",
"Sec": 770795
}
"
2025-03-08 18:44:35.806 - debug: kecontact.0 (118391) Search can't be optimized because wildcard not at the end, fallback to keys!: function(doc) { if (doc.type === 'state') emit(doc._id, doc) }
2025-03-08 18:44:35.881 - debug: kecontact.0 (118391) Message from 192.168.5.24 send to kecontact.1
2025-03-08 18:44:36.101 - debug: kecontact.0 (118391) UDP datagram from 192.168.5.24:7090: "{
"ID": "3",
"U1": 223,
"U2": 229,
"U3": 229,
"I1": 6611,
"I2": 6,
"I3": 4,
"P": 1436768,
"PF": 969,
"E pres": 26177,
"E total": 76992438,
"Serial": "17405468",
"Sec": 770796
}
"
2025-03-08 18:44:36.102 - debug: kecontact.0 (118391) Search can't be optimized because wildcard not at the end, fallback to keys!: function(doc) { if (doc.type === 'state') emit(doc._id, doc) }
2025-03-08 18:44:36.177 - debug: kecontact.0 (118391) Message from 192.168.5.24 send to kecontact.1
2025-03-08 18:44:36.402 - debug: kecontact.0 (118391) UDP datagram from 192.168.5.24:7090: "{
"ID": "100",
"Session ID": 2664,
"Curr HW": 16000,
"E start": 76966261,
"E pres": 26177,
"started[s]": 1741452712,
"ended[s]": 0,
"started": "2025-03-08 16:51:52.000",
"ended": "0",
"reason": 5,
"timeQ": 0,
"RFID tag": "0000000000000000",
"RFID class": "00000000000000000000",
"Serial": "17405468",
"Sec": 770796
}
"
2025-03-08 18:44:36.403 - debug: kecontact.0 (118391) Search can't be optimized because wildcard not at the end, fallback to keys!: function(doc) { if (doc.type === 'state') emit(doc._id, doc) }
2025-03-08 18:44:36.477 - debug: kecontact.0 (118391) Message from 192.168.5.24 send to kecontact.1
2025-03-08 18:44:37.001 - debug: kecontact.0 (118391) Sent "report 3" to 192.168.5.25:7090
2025-03-08 18:44:37.004 - debug: kecontact.0 (118391) UDP datagram from 192.168.5.25:7090: "{
"ID": "3",
"U1": 224,
"U2": 229,
"U3": 229,
"I1": 15793,
"I2": 15751,
"I3": 15713,
"P": 10752347,
"PF": 999,
"E pres": 35127,
"E total": 553065,
"Serial": "28345628",
"Sec": 1903927
}
"
2025-03-08 18:44:37.072 - debug: kecontact.0 (118391) current max current is 16000
2025-03-08 18:44:37.072 - debug: kecontact.0 (118391) amperage of mains: 24310/21260/18240, amperage of charging station: 15793/15751/15713 => available: 23483/26491/29473
2025-03-08 18:44:37.072 - debug: kecontact.0 (118391) Available max amperage: 23500
2025-03-08 18:44:37.073 - debug: kecontact.0 (118391) Available surplus: -3231.2530000000006
2025-03-08 18:44:37.301 - debug: kecontact.0 (118391) Sent "report 3" to 192.168.5.25:7090
2025-03-08 18:44:37.303 - debug: kecontact.0 (118391) UDP datagram from 192.168.5.25:7090: "{
"ID": "3",
"U1": 224,
"U2": 228,
"U3": 229,
"I1": 15807,
"I2": 15762,
"I3": 15717,
"P": 10765863,
"PF": 1000,
"E pres": 35141,
"E total": 553071,
"Serial": "28345628",
"Sec": 1903928
}
"
2025-03-08 18:44:37.366 - debug: kecontact.0 (118391) current max current is 16000
2025-03-08 18:44:37.366 - debug: kecontact.0 (118391) amperage of mains: 24310/21260/18240, amperage of charging station: 15807/15762/15717 => available: 23497/26502/29477
2025-03-08 18:44:37.366 - debug: kecontact.0 (118391) Available max amperage: 23500
2025-03-08 18:44:37.366 - debug: kecontact.0 (118391) Available surplus: -3704.737000000001
2025-03-08 18:44:38.314 - debug: kecontact.0 (118391) UDP datagram from 192.168.5.25:7090: "{"E pres": 35174}"
2025-03-08 18:44:41.569 - debug: kecontact.0 (118391) UDP datagram from 192.168.5.25:7090: "{"E pres": 35270}"
2025-03-08 18:44:45.041 - debug: kecontact.0 (118391) UDP datagram from 192.168.5.25:7090: "{"E pres": 35374}"
2025-03-08 18:44:48.295 - debug: kecontact.0 (118391) UDP datagram from 192.168.5.25:7090: "{"E pres": 35470}"
2025-03-08 18:44:48.716 - debug: kecontact.0 (118391) Sent "report 2" to 192.168.5.25:7090
2025-03-08 18:44:48.718 - debug: kecontact.0 (118391) UDP datagram from 192.168.5.25:7090: "{
"ID": "2",
"State": 3,
"Error1": 0,
"Error2": 0,
"Plug": 7,
"AuthON": 1,
"Authreq": 0,
"Enable sys": 1,
"Enable user": 1,
"Max curr": 16000,
"Max curr %": 266,
"Curr HW": 16000,
"Curr user": 16000,
"Curr FS": 0,
"Tmo FS": 0,
"Curr timer": 16000,
"Tmo CT": 0,
"Setenergy": 0,
"Output": 1,
"Input": 1,
"X2 phaseSwitch source": 4,
"X2 phaseSwitch": 1,
"Serial": "28345628",
"Sec": 1903939
}
"
2025-03-08 18:44:49.016 - debug: kecontact.0 (118391) Sent "report 3" to 192.168.5.25:7090
2025-03-08 18:44:49.018 - debug: kecontact.0 (118391) UDP datagram from 192.168.5.25:7090: "{
"ID": "3",
"U1": 222,
"U2": 229,
"U3": 229,
"I1": 15737,
"I2": 15669,
"I3": 15627,
"P": 10691035,
"PF": 999,
"E pres": 35490,
"E total": 553420,
"Serial": "28345628",
"Sec": 1903939
}
"
2025-03-08 18:44:49.084 - debug: kecontact.0 (118391) current max current is 16000
2025-03-08 18:44:49.085 - debug: kecontact.0 (118391) amperage of mains: 24310/21260/18240, amperage of charging station: 15737/15669/15627 => available: 23427/26409/29387
2025-03-08 18:44:49.085 - debug: kecontact.0 (118391) Available max amperage: 23500
2025-03-08 18:44:49.085 - debug: kecontact.0 (118391) Available surplus: -3779.5650000000005
2025-03-08 18:44:49.085 - debug: kecontact.0 (118391) pvAutomaticsActive: false, vehicleIsPlugged: true
2025-03-08 18:44:49.085 - debug: kecontact.0 (118391) new current due to vehicle not plugged or pv automatics not active is 16000
2025-03-08 18:44:49.085 - debug: kecontact.0 (118391) wallbox set to charging maximum of 16000 mA
2025-03-08 18:44:49.317 - debug: kecontact.0 (118391) Sent "report 100" to 192.168.5.25:7090
2025-03-08 18:44:49.318 - debug: kecontact.0 (118391) UDP datagram from 192.168.5.25:7090: "{
"ID": "100",
"Session ID": 28,
"Curr HW": 16000,
"E start": 517930,
"E pres": 35496,
"started[s]": 1741452594,
"ended[s]": 0,
"started": "2025-03-08 16:49:54.000",
"ended": "0",
"reason": 5,
"timeQ": 0,
"RFID tag": "043a573aa0169000",
"RFID class": "55d0a976000000000000",
"Serial": "28345628",
"Sec": 1903940
}
"
2025-03-08 18:44:49.318 - debug: kecontact.0 (118391) History ID received: 00
2025-03-08 18:44:50.802 - debug: kecontact.0 (118391) UDP datagram from 192.168.5.24:7090: "{
"ID": "2",
"State": 3,
"Error1": 0,
"Error2": 0,
"Plug": 7,
"AuthON": 0,
"Authreq": 0,
"Enable sys": 1,
"Enable user": 1,
"Max curr": 16000,
"Max curr %": 266,
"Curr HW": 16000,
"Curr user": 16000,
"Curr FS": 0,
"Tmo FS": 0,
"Curr timer": 16000,
"Tmo CT": 0,
"Setenergy": 0,
"Output": 0,
"Input": 0,
"X2 phaseSwitch source": 0,
"X2 phaseSwitch": 0,
"Serial": "17405468",
"Sec": 770810
}
"
2025-03-08 18:44:50.806 - debug: kecontact.0 (118391) Search can't be optimized because wildcard not at the end, fallback to keys!: function(doc) { if (doc.type === 'state') emit(doc._id, doc) }
2025-03-08 18:44:50.873 - debug: kecontact.0 (118391) Message from 192.168.5.24 send to kecontact.1
2025-03-08 18:44:51.102 - debug: kecontact.0 (118391) UDP datagram from 192.168.5.24:7090: "{
"ID": "3",
"U1": 223,
"U2": 229,
"U3": 229,
"I1": 6609,
"I2": 7,
"I3": 3,
"P": 1432143,
"PF": 969,
"E pres": 26236,
"E total": 76992497,
"Serial": "17405468",
"Sec": 770811
}
"
2025-03-08 18:44:51.103 - debug: kecontact.0 (118391) Search can't be optimized because wildcard not at the end, fallback to keys!: function(doc) { if (doc.type === 'state') emit(doc._id, doc) }
2025-03-08 18:44:51.169 - debug: kecontact.0 (118391) Message from 192.168.5.24 send to kecontact.1
2025-03-08 18:44:51.402 - debug: kecontact.0 (118391) UDP datagram from 192.168.5.24:7090: "{
"ID": "100",
"Session ID": 2664,
"Curr HW": 16000,
"E start": 76966261,
"E pres": 26237,
"started[s]": 1741452712,
"ended[s]": 0,
"started": "2025-03-08 16:51:52.000",
"ended": "0",
"reason": 5,
"timeQ": 0,
"RFID tag": "0000000000000000",
"RFID class": "00000000000000000000",
"Serial": "17405468",
"Sec": 770811
}
"
2025-03-08 18:44:51.403 - debug: kecontact.0 (118391) Search can't be optimized because wildcard not at the end, fallback to keys!: function(doc) { if (doc.type === 'state') emit(doc._id, doc) }
2025-03-08 18:44:51.469 - debug: kecontact.0 (118391) Message from 192.168.5.24 send to kecontact.1
2025-03-08 18:44:51.768 - debug: kecontact.0 (118391) UDP datagram from 192.168.5.25:7090: "{"E pres": 35574}"
2025-03-08 18:44:51.852 - debug: kecontact.0 (118391) UDP datagram from 192.168.5.24:7090: "{"E pres": 26239}"
2025-03-08 18:44:51.852 - debug: kecontact.0 (118391) UDP broadcast datagram from 192.168.5.24:7090: "{"E pres": 26239}"
2025-03-08 18:44:51.853 - debug: kecontact.0 (118391) Search can't be optimized because wildcard not at the end, fallback to keys!: function(doc) { if (doc.type === 'state') emit(doc._id, doc) }
2025-03-08 18:44:51.921 - debug: kecontact.0 (118391) Message from 192.168.5.24 send to kecontact.1
2025-03-08 18:44:51.922 - debug: kecontact.0 (118391) UDP broadcast datagram from 192.168.5.24:7090: "{"E pres": 26239}"
2025-03-08 18:44:55.023 - debug: kecontact.0 (118391) UDP datagram from 192.168.5.25:7090: "{"E pres": 35670}"
2025-03-08 18:44:58.494 - debug: kecontact.0 (118391) UDP datagram from 192.168.5.25:7090: "{"E pres": 35773}"
2025-03-08 18:45:00.050 - debug: kecontact.0 (118391) set automatic.batteryStorageStrategy to 2
2025-03-08 18:45:01.749 - debug: kecontact.0 (118391) UDP datagram from 192.168.5.25:7090: "{"E pres": 35870}"
2025-03-08 18:45:03.716 - debug: kecontact.0 (118391) Sent "report 2" to 192.168.5.25:7090
2025-03-08 18:45:03.717 - debug: kecontact.0 (118391) UDP datagram from 192.168.5.25:7090: "{
"ID": "2",
"State": 3,
"Error1": 0,
"Error2": 0,
"Plug": 7,
"AuthON": 1,
"Authreq": 0,
"Enable sys": 1,
"Enable user": 1,
"Max curr": 16000,
"Max curr %": 266,
"Curr HW": 16000,
"Curr user": 16000,
"Curr FS": 0,
"Tmo FS": 0,
"Curr timer": 16000,
"Tmo CT": 0,
"Setenergy": 0,
"Output": 1,
"Input": 1,
"X2 phaseSwitch source": 4,
"X2 phaseSwitch": 1,
"Serial": "28345628",
"Sec": 1903954
}
"
2025-03-08 18:45:04.016 - debug: kecontact.0 (118391) Sent "report 3" to 192.168.5.25:7090
2025-03-08 18:45:04.017 - debug: kecontact.0 (118391) UDP datagram from 192.168.5.25:7090: "{
"ID": "3",
"U1": 223,
"U2": 227,
"U3": 229,
"I1": 15744,
"I2": 15699,
"I3": 15681,
"P": 10697250,
"PF": 999,
"E pres": 35934,
"E total": 553864,
"Serial": "28345628",
"Sec": 1903954
}
"
2025-03-08 18:45:04.081 - debug: kecontact.0 (118391) current max current is 16000
2025-03-08 18:45:04.081 - debug: kecontact.0 (118391) amperage of mains: 24220/20240/18180, amperage of charging station: 15744/15699/15681 => available: 23524/27459/29501
2025-03-08 18:45:04.081 - debug: kecontact.0 (118391) Available max amperage: 23500
2025-03-08 18:45:04.081 - debug: kecontact.0 (118391) Available surplus: -3538.5499999999993
2025-03-08 18:45:04.316 - debug: kecontact.0 (118391) Sent "report 100" to 192.168.5.25:7090
2025-03-08 18:45:04.318 - debug: kecontact.0 (118391) UDP datagram from 192.168.5.25:7090: "{
"ID": "100",
"Session ID": 28,
"Curr HW": 16000,
"E start": 517930,
"E pres": 35941,
"started[s]": 1741452594,
"ended[s]": 0,
"started": "2025-03-08 16:49:54.000",
"ended": "0",
"reason": 5,
"timeQ": 0,
"RFID tag": "043a573aa0169000",
"RFID class": "55d0a976000000000000",
"Serial": "28345628",
"Sec": 1903955
}
"
2025-03-08 18:45:04.318 - debug: kecontact.0 (118391) History ID received: 00
2025-03-08 18:45:05.224 - debug: kecontact.0 (118391) UDP datagram from 192.168.5.25:7090: "{"E pres": 35973}"
2025-03-08 18:45:05.803 - debug: kecontact.0 (118391) UDP datagram from 192.168.5.24:7090: "{
"ID": "2",
"State": 3,
"Error1": 0,
"Error2": 0,
"Plug": 7,
"AuthON": 0,
"Authreq": 0,
"Enable sys": 1,
"Enable user": 1,
"Max curr": 16000,
"Max curr %": 266,
"Curr HW": 16000,
"Curr user": 16000,
"Curr FS": 0,
"Tmo FS": 0,
"Curr timer": 16000,
"Tmo CT": 0,
"Setenergy": 0,
"Output": 0,
"Input": 0,
"X2 phaseSwitch source": 0,
"X2 phaseSwitch": 0,
"Serial": "17405468",
"Sec": 770825
}
"
2025-03-08 18:45:05.805 - debug: kecontact.0 (118391) Search can't be optimized because wildcard not at the end, fallback to keys!: function(doc) { if (doc.type === 'state') emit(doc._id, doc) }
2025-03-08 18:45:05.873 - debug: kecontact.0 (118391) Message from 192.168.5.24 send to kecontact.1
2025-03-08 18:45:06.103 - debug: kecontact.0 (118391) UDP datagram from 192.168.5.24:7090: "{
"ID": "3",
"U1": 223,
"U2": 228,
"U3": 229,
"I1": 6596,
"I2": 5,
"I3": 3,
"P": 1431653,
"PF": 969,
"E pres": 26296,
"E total": 76992557,
"Serial": "17405468",
"Sec": 770826
}
"
2025-03-08 18:45:06.104 - debug: kecontact.0 (118391) Search can't be optimized because wildcard not at the end, fallback to keys!: function(doc) { if (doc.type === 'state') emit(doc._id, doc) }
2025-03-08 18:45:06.173 - debug: kecontact.0 (118391) Message from 192.168.5.24 send to kecontact.1
2025-03-08 18:45:06.404 - debug: kecontact.0 (118391) UDP datagram from 192.168.5.24:7090: "{
"ID": "100",
"Session ID": 2664,
"Curr HW": 16000,
"E start": 76966261,
"E pres": 26297,
"started[s]": 1741452712,
"ended[s]": 0,
"started": "2025-03-08 16:51:52.000",
"ended": "0",
"reason": 5,
"timeQ": 0,
"RFID tag": "0000000000000000",
"RFID class": "00000000000000000000",
"Serial": "17405468",
"Sec": 770826
}
"
2025-03-08 18:45:06.404 - debug: kecontact.0 (118391) Search can't be optimized because wildcard not at the end, fallback to keys!: function(doc) { if (doc.type === 'state') emit(doc._id, doc) }
2025-03-08 18:45:06.473 - debug: kecontact.0 (118391) Message from 192.168.5.24 send to kecontact.1
2025-03-08 18:45:08.476 - debug: kecontact.0 (118391) UDP datagram from 192.168.5.25:7090: "{"E pres": 36070}"
2025-03-08 18:45:11.949 - debug: kecontact.0 (118391) UDP datagram from 192.168.5.25:7090: "{"E pres": 36174}"
2025-03-08 18:45:15.203 - debug: kecontact.0 (118391) UDP datagram from 192.168.5.25:7090: "{"E pres": 36270}"
2025-03-08 18:45:17.091 - debug: kecontact.0 (118391) UDP datagram from 192.168.5.24:7090: "{"E pres": 26339}"
2025-03-08 18:45:17.092 - debug: kecontact.0 (118391) UDP broadcast datagram from 192.168.5.24:7090: "{"E pres": 26339}"
2025-03-08 18:45:17.092 - debug: kecontact.0 (118391) Search can't be optimized because wildcard not at the end, fallback to keys!: function(doc) { if (doc.type === 'state') emit(doc._id, doc) }
2025-03-08 18:45:17.112 - debug: kecontact.0 (118391) UDP broadcast datagram from 192.168.5.24:7090: "{"E pres": 26339}"
2025-03-08 18:45:17.169 - debug: kecontact.0 (118391) Message from 192.168.5.24 send to kecontact.1
2025-03-08 18:45:18.675 - debug: kecontact.0 (118391) UDP datagram from 192.168.5.25:7090: "{"E pres": 36374}"
2025-03-08 18:45:18.716 - debug: kecontact.0 (118391) Sent "report 2" to 192.168.5.25:7090
2025-03-08 18:45:18.719 - debug: kecontact.0 (118391) UDP datagram from 192.168.5.25:7090: "{
"ID": "2",
"State": 3,
"Error1": 0,
"Error2": 0,
"Plug": 7,
"AuthON": 1,
"Authreq": 0,
"Enable sys": 1,
"Enable user": 1,
"Max curr": 16000,
"Max curr %": 266,
"Curr HW": 16000,
"Curr user": 16000,
"Curr FS": 0,
"Tmo FS": 0,
"Curr timer": 16000,
"Tmo CT": 0,
"Setenergy": 0,
"Output": 1,
"Input": 1,
"X2 phaseSwitch source": 4,
"X2 phaseSwitch": 1,
"Serial": "28345628",
"Sec": 1903969
}
"
2025-03-08 18:45:19.017 - debug: kecontact.0 (118391) Sent "report 3" to 192.168.5.25:7090
2025-03-08 18:45:19.019 - debug: kecontact.0 (118391) UDP datagram from 192.168.5.25:7090: "{
"ID": "3",
"U1": 224,
"U2": 227,
"U3": 230,
"I1": 15739,
"I2": 15697,
"I3": 15624,
"P": 10691812,
"PF": 1000,
"E pres": 36380,
"E total": 554310,
"Serial": "28345628",
"Sec": 1903969
}
"
2025-03-08 18:45:19.075 - debug: kecontact.0 (118391) current max current is 16000
2025-03-08 18:45:19.076 - debug: kecontact.0 (118391) amperage of mains: 24370/19410/18200, amperage of charging station: 15739/15697/15624 => available: 23369/28287/29424
2025-03-08 18:45:19.076 - debug: kecontact.0 (118391) Available max amperage: 23500
2025-03-08 18:45:19.076 - debug: kecontact.0 (118391) Available surplus: -3371.188
2025-03-08 18:45:19.076 - debug: kecontact.0 (118391) pvAutomaticsActive: false, vehicleIsPlugged: true
2025-03-08 18:45:19.076 - debug: kecontact.0 (118391) new current due to vehicle not plugged or pv automatics not active is 16000
2025-03-08 18:45:19.076 - debug: kecontact.0 (118391) wallbox set to charging maximum of 16000 mA
2025-03-08 18:45:19.317 - debug: kecontact.0 (118391) Sent "report 100" to 192.168.5.25:7090
2025-03-08 18:45:19.319 - debug: kecontact.0 (118391) UDP datagram from 192.168.5.25:7090: "{
"ID": "100",
"Session ID": 28,
"Curr HW": 16000,
"E start": 517930,
"E pres": 36393,
"started[s]": 1741452594,
"ended[s]": 0,
"started": "2025-03-08 16:49:54.000",
"ended": "0",
"reason": 5,
"timeQ": 0,
"RFID tag": "043a573aa0169000",
"RFID class": "55d0a976000000000000",
"Serial": "28345628",
"Sec": 1903970
}
"
2025-03-08 18:45:19.319 - debug: kecontact.0 (118391) History ID received: 00
2025-03-08 18:45:20.804 - debug: kecontact.0 (118391) UDP datagram from 192.168.5.24:7090: "{
"ID": "2",
"State": 3,
"Error1": 0,
"Error2": 0,
"Plug": 7,
"AuthON": 0,
"Authreq": 0,
"Enable sys": 1,
"Enable user": 1,
"Max curr": 16000,
"Max curr %": 266,
"Curr HW": 16000,
"Curr user": 16000,
"Curr FS": 0,
"Tmo FS": 0,
"Curr timer": 16000,
"Tmo CT": 0,
"Setenergy": 0,
"Output": 0,
"Input": 0,
"X2 phaseSwitch source": 0,
"X2 phaseSwitch": 0,
"Serial": "17405468",
"Sec": 770840
}
"
2025-03-08 18:45:20.805 - debug: kecontact.0 (118391) Search can't be optimized because wildcard not at the end, fallback to keys!: function(doc) { if (doc.type === 'state') emit(doc._id, doc) }
2025-03-08 18:45:20.873 - debug: kecontact.0 (118391) Message from 192.168.5.24 send to kecontact.1
2025-03-08 18:45:21.104 - debug: kecontact.0 (118391) UDP datagram from 192.168.5.24:7090: "{
"ID": "3",
"U1": 224,
"U2": 228,
"U3": 229,
"I1": 6474,
"I2": 5,
"I3": 4,
"P": 1411511,
"PF": 968,
"E pres": 26354,
"E total": 76992615,
"Serial": "17405468",
"Sec": 770841
}
"
2025-03-08 18:45:21.105 - debug: kecontact.0 (118391) Search can't be optimized because wildcard not at the end, fallback to keys!: function(doc) { if (doc.type === 'state') emit(doc._id, doc) }
2025-03-08 18:45:21.173 - debug: kecontact.0 (118391) Message from 192.168.5.24 send to kecontact.1
2025-03-08 18:45:21.404 - debug: kecontact.0 (118391) UDP datagram from 192.168.5.24:7090: "{
"ID": "100",
"Session ID": 2664,
"Curr HW": 16000,
"E start": 76966261,
"E pres": 26355,
"started[s]": 1741452712,
"ended[s]": 0,
"started": "2025-03-08 16:51:52.000",
"ended": "0",
"reason": 5,
"timeQ": 0,
"RFID tag": "0000000000000000",
"RFID class": "00000000000000000000",
"Serial": "17405468",
"Sec": 770841
}
"
2025-03-08 18:45:21.404 - debug: kecontact.0 (118391) Search can't be optimized because wildcard not at the end, fallback to keys!: function(doc) { if (doc.type === 'state') emit(doc._id, doc) }
2025-03-08 18:45:21.469 - debug: kecontact.0 (118391) Message from 192.168.5.24 send to kecontact.1
2025-03-08 18:45:21.930 - debug: kecontact.0 (118391) UDP datagram from 192.168.5.25:7090: "{"E pres": 36470}"
2025-03-08 18:45:25.402 - debug: kecontact.0 (118391) UDP datagram from 192.168.5.25:7090: "{"E pres": 36574}"
2025-03-08 18:45:28.657 - debug: kecontact.0 (118391) UDP datagram from 192.168.5.25:7090: "{"E pres": 36671}"
2025-03-08 18:45:32.129 - debug: kecontact.0 (118391) UDP datagram from 192.168.5.25:7090: "{"E pres": 36776}"
2025-03-08 18:45:33.716 - debug: kecontact.0 (118391) Sent "report 2" to 192.168.5.25:7090
2025-03-08 18:45:33.717 - debug: kecontact.0 (118391) UDP datagram from 192.168.5.25:7090: "{
"ID": "2",
"State": 3,
"Error1": 0,
"Error2": 0,
"Plug": 7,
"AuthON": 1,
"Authreq": 0,
"Enable sys": 1,
"Enable user": 1,
"Max curr": 16000,
"Max curr %": 266,
"Curr HW": 16000,
"Curr user": 16000,
"Curr FS": 0,
"Tmo FS": 0,
"Curr timer": 16000,
"Tmo CT": 0,
"Setenergy": 0,
"Output": 1,
"Input": 1,
"X2 phaseSwitch source": 4,
"X2 phaseSwitch": 1,
"Serial": "28345628",
"Sec": 1903984
}
"
2025-03-08 18:45:34.016 - debug: kecontact.0 (118391) Sent "report 3" to 192.168.5.25:7090
2025-03-08 18:45:34.017 - debug: kecontact.0 (118391) UDP datagram from 192.168.5.25:7090: "{
"ID": "3",
"U1": 223,
"U2": 227,
"U3": 229,
"I1": 15737,
"I2": 15690,
"I3": 15657,
"P": 10699016,
"PF": 1000,
"E pres": 36827,
"E total": 554757,
"Serial": "28345628",
"Sec": 1903984
}
"
2025-03-08 18:45:34.083 - debug: kecontact.0 (118391) current max current is 16000
2025-03-08 18:45:34.083 - debug: kecontact.0 (118391) amperage of mains: 24140/19180/18140, amperage of charging station: 15737/15690/15657 => available: 23597/28510/29517
2025-03-08 18:45:34.083 - debug: kecontact.0 (118391) Available max amperage: 23500
2025-03-08 18:45:34.083 - debug: kecontact.0 (118391) Available surplus: -3301.2839999999997
2025-03-08 18:45:34.316 - debug: kecontact.0 (118391) Sent "report 100" to 192.168.5.25:7090
2025-03-08 18:45:34.317 - debug: kecontact.0 (118391) UDP datagram from 192.168.5.25:7090: "{
"ID": "100",
"Session ID": 28,
"Curr HW": 16000,
"E start": 517930,
"E pres": 36840,
"started[s]": 1741452594,
"ended[s]": 0,
"started": "2025-03-08 16:49:54.000",
"ended": "0",
"reason": 5,
"timeQ": 0,
"RFID tag": "043a573aa0169000",
"RFID class": "55d0a976000000000000",
"Serial": "28345628",
"Sec": 1903985
}
"
2025-03-08 18:45:34.317 - debug: kecontact.0 (118391) History ID received: 00
2025-03-08 18:45:35.017 - info: host.raspberrypi instance system.adapter.daswetter.0 in version "3.2.2" started with pid 118562
2025-03-08 18:45:35.384 - debug: kecontact.0 (118391) UDP datagram from 192.168.5.25:7090: "{"E pres": 36871}"
2025-03-08 18:45:35.804 - debug: kecontact.0 (118391) UDP datagram from 192.168.5.24:7090: "{
"ID": "2",
"State": 3,
"Error1": 0,
"Error2": 0,
"Plug": 7,
"AuthON": 0,
"Authreq": 0,
"Enable sys": 1,
"Enable user": 1,
"Max curr": 16000,
"Max curr %": 266,
"Curr HW": 16000,
"Curr user": 16000,
"Curr FS": 0,
"Tmo FS": 0,
"Curr timer": 16000,
"Tmo CT": 0,
"Setenergy": 0,
"Output": 0,
"Input": 0,
"X2 phaseSwitch source": 0,
"X2 phaseSwitch": 0,
"Serial": "17405468",
"Sec": 770855
}
"
2025-03-08 18:45:35.811 - debug: kecontact.0 (118391) Search can't be optimized because wildcard not at the end, fallback to keys!: function(doc) { if (doc.type === 'state') emit(doc._id, doc) }
2025-03-08 18:45:35.881 - debug: kecontact.0 (118391) Message from 192.168.5.24 send to kecontact.1
2025-03-08 18:45:35.997 - info: daswetter.0 (118562) starting. Version 3.2.2 in /opt/iobroker/node_modules/iobroker.daswetter, node: v20.18.3, js-controller: 7.0.6
2025-03-08 18:45:36.105 - debug: kecontact.0 (118391) UDP datagram from 192.168.5.24:7090: "{
"ID": "3",
"U1": 223,
"U2": 228,
"U3": 230,
"I1": 7307,
"I2": 5,
"I3": 4,
"P": 1587297,
"PF": 971,
"E pres": 26415,
"E total": 76992676,
"Serial": "17405468",
"Sec": 770856
}
"
2025-03-08 18:45:36.105 - debug: kecontact.0 (118391) Search can't be optimized because wildcard not at the end, fallback to keys!: function(doc) { if (doc.type === 'state') emit(doc._id, doc) }
2025-03-08 18:45:36.173 - debug: kecontact.0 (118391) Message from 192.168.5.24 send to kecontact.1
2025-03-08 18:45:36.405 - debug: kecontact.0 (118391) UDP datagram from 192.168.5.24:7090: "{
"ID": "100",
"Session ID": 2664,
"Curr HW": 16000,
"E start": 76966261,
"E pres": 26416,
"started[s]": 1741452712,
"ended[s]": 0,
"started": "2025-03-08 16:51:52.000",
"ended": "0",
"reason": 5,
"timeQ": 0,
"RFID tag": "0000000000000000",
"RFID class": "00000000000000000000",
"Serial": "17405468",
"Sec": 770856
}
"
2025-03-08 18:45:36.408 - debug: kecontact.0 (118391) Search can't be optimized because wildcard not at the end, fallback to keys!: function(doc) { if (doc.type === 'state') emit(doc._id, doc) }
2025-03-08 18:45:36.477 - debug: kecontact.0 (118391) Message from 192.168.5.24 send to kecontact.1
2025-03-08 18:45:38.856 - debug: kecontact.0 (118391) UDP datagram from 192.168.5.25:7090: "{"E pres": 36975}"
2025-03-08 18:45:40.667 - info: daswetter.0 (118562) still wrong data structure from server received! repaired...
2025-03-08 18:45:41.467 - debug: kecontact.0 (118391) UDP datagram from 192.168.5.24:7090: "{"E pres": 26439}"
2025-03-08 18:45:41.468 - debug: kecontact.0 (118391) UDP broadcast datagram from 192.168.5.24:7090: "{"E pres": 26439}"
2025-03-08 18:45:41.468 - debug: kecontact.0 (118391) Search can't be optimized because wildcard not at the end, fallback to keys!: function(doc) { if (doc.type === 'state') emit(doc._id, doc) }
2025-03-08 18:45:41.481 - debug: kecontact.0 (118391) UDP broadcast datagram from 192.168.5.24:7090: "{"E pres": 26439}"
2025-03-08 18:45:41.537 - debug: kecontact.0 (118391) Message from 192.168.5.24 send to kecontact.1
2025-03-08 18:45:41.937 - info: daswetter.0 (118562) Terminated (ADAPTER_REQUESTED_TERMINATION): All data handled, adapter stopped until next scheduled moment
2025-03-08 18:45:42.111 - debug: kecontact.0 (118391) UDP datagram from 192.168.5.25:7090: "{"E pres": 37072}"
2025-03-08 18:45:42.444 - info: daswetter.0 (118562) cleaned everything up...
2025-03-08 18:45:42.449 - info: host.raspberrypi instance system.adapter.daswetter.0 having pid 118562 terminated with code 11 (ADAPTER_REQUESTED_TERMINATION)
2025-03-08 18:45:45.583 - debug: kecontact.0 (118391) UDP datagram from 192.168.5.25:7090: "{"E pres": 37175}"
2025-03-08 18:45:48.715 - debug: kecontact.0 (118391) Sent "report 2" to 192.168.5.25:7090
2025-03-08 18:45:48.717 - debug: kecontact.0 (118391) UDP datagram from 192.168.5.25:7090: "{
"ID": "2",
"State": 3,
"Error1": 0,
"Error2": 0,
"Plug": 7,
"AuthON": 1,
"Authreq": 0,
"Enable sys": 1,
"Enable user": 1,
"Max curr": 16000,
"Max curr %": 266,
"Curr HW": 16000,
"Curr user": 16000,
"Curr FS": 0,
"Tmo FS": 0,
"Curr timer": 16000,
"Tmo CT": 0,
"Setenergy": 0,
"Output": 1,
"Input": 1,
"X2 phaseSwitch source": 4,
"X2 phaseSwitch": 1,
"Serial": "28345628",
"Sec": 1903999
}
"
2025-03-08 18:45:48.838 - debug: kecontact.0 (118391) UDP datagram from 192.168.5.25:7090: "{"E pres": 37272}"
2025-03-08 18:45:49.015 - debug: kecontact.0 (118391) Sent "report 3" to 192.168.5.25:7090
2025-03-08 18:45:49.017 - debug: kecontact.0 (118391) UDP datagram from 192.168.5.25:7090: "{
"ID": "3",
"U1": 224,
"U2": 227,
"U3": 229,
"I1": 15728,
"I2": 15688,
"I3": 15641,
"P": 10698990,
"PF": 1000,
"E pres": 37272,
"E total": 555202,
"Serial": "28345628",
"Sec": 1903999
}
"
2025-03-08 18:45:49.080 - debug: kecontact.0 (118391) current max current is 16000
2025-03-08 18:45:49.080 - debug: kecontact.0 (118391) amperage of mains: 25020/19210/18190, amperage of charging station: 15728/15688/15641 => available: 22708/28478/29451
2025-03-08 18:45:49.080 - debug: kecontact.0 (118391) Available max amperage: 22500
2025-03-08 18:45:49.080 - debug: kecontact.0 (118391) Available surplus: -3462.51
2025-03-08 18:45:49.080 - debug: kecontact.0 (118391) pvAutomaticsActive: false, vehicleIsPlugged: true
2025-03-08 18:45:49.080 - debug: kecontact.0 (118391) new current due to vehicle not plugged or pv automatics not active is 16000
2025-03-08 18:45:49.080 - debug: kecontact.0 (118391) wallbox set to charging maximum of 16000 mA
2025-03-08 18:45:49.316 - debug: kecontact.0 (118391) Sent "report 100" to 192.168.5.25:7090
2025-03-08 18:45:49.317 - debug: kecontact.0 (118391) UDP datagram from 192.168.5.25:7090: "{
"ID": "100",
"Session ID": 28,
"Curr HW": 16000,
"E start": 517930,
"E pres": 37284,
"started[s]": 1741452594,
"ended[s]": 0,
"started": "2025-03-08 16:49:54.000",
"ended": "0",
"reason": 5,
"timeQ": 0,
"RFID tag": "043a573aa0169000",
"RFID class": "55d0a976000000000000",
"Serial": "28345628",
"Sec": 1904000
}
"
2025-03-08 18:45:49.318 - debug: kecontact.0 (118391) History ID received: 00
2025-03-08 18:45:50.804 - debug: kecontact.0 (118391) UDP datagram from 192.168.5.24:7090: "{
"ID": "2",
"State": 3,
"Error1": 0,
"Error2": 0,
"Plug": 7,
"AuthON": 0,
"Authreq": 0,
"Enable sys": 1,
"Enable user": 1,
"Max curr": 16000,
"Max curr %": 266,
"Curr HW": 16000,
"Curr user": 16000,
"Curr FS": 0,
"Tmo FS": 0,
"Curr timer": 16000,
"Tmo CT": 0,
"Setenergy": 0,
"Output": 0,
"Input": 0,
"X2 phaseSwitch source": 0,
"X2 phaseSwitch": 0,
"Serial": "17405468",
"Sec": 770870
}
"
2025-03-08 18:45:50.808 - debug: kecontact.0 (118391) Search can't be optimized because wildcard not at the end, fallback to keys!: function(doc) { if (doc.type === 'state') emit(doc._id, doc) }
2025-03-08 18:45:50.873 - debug: kecontact.0 (118391) Message from 192.168.5.24 send to kecontact.1
2025-03-08 18:45:51.104 - debug: kecontact.0 (118391) UDP datagram from 192.168.5.24:7090: "{
"ID": "3",
"U1": 224,
"U2": 228,
"U3": 229,
"I1": 6519,
"I2": 6,
"I3": 4,
"P": 1421467,
"PF": 969,
"E pres": 26477,
"E total": 76992738,
"Serial": "17405468",
"Sec": 770871
}
"
2025-03-08 18:45:51.105 - debug: kecontact.0 (118391) Search can't be optimized because wildcard not at the end, fallback to keys!: function(doc) { if (doc.type === 'state') emit(doc._id, doc) }
2025-03-08 18:45:51.173 - debug: kecontact.0 (118391) Message from 192.168.5.24 send to kecontact.1
2025-03-08 18:45:51.404 - debug: kecontact.0 (118391) UDP datagram from 192.168.5.24:7090: "{
"ID": "100",
"Session ID": 2664,
"Curr HW": 16000,
"E start": 76966261,
"E pres": 26478,
"started[s]": 1741452712,
"ended[s]": 0,
"started": "2025-03-08 16:51:52.000",
"ended": "0",
"reason": 5,
"timeQ": 0,
"RFID tag": "0000000000000000",
"RFID class": "00000000000000000000",
"Serial": "17405468",
"Sec": 770871
}
"
2025-03-08 18:45:51.405 - debug: kecontact.0 (118391) Search can't be optimized because wildcard not at the end, fallback to keys!: function(doc) { if (doc.type === 'state') emit(doc._id, doc) }
2025-03-08 18:45:51.473 - debug: kecontact.0 (118391) Message from 192.168.5.24 send to kecontact.1
2025-03-08 18:45:52.310 - debug: kecontact.0 (118391) UDP datagram from 192.168.5.25:7090: "{"E pres": 37374}"
2025-03-08 18:45:55.565 - debug: kecontact.0 (118391) UDP datagram from 192.168.5.25:7090: "{"E pres": 37472}"
2025-03-08 18:45:59.037 - debug: kecontact.0 (118391) UDP datagram from 192.168.5.25:7090: "{"E pres": 37575}"
2025-03-08 18:46:00.094 - debug: kecontact.0 (118391) set automatic.batteryStorageStrategy to 2
2025-03-08 18:46:00.600 - info: web.0 (59499) <== Disconnect system.user.admin from ::ffff:192.168.5.225
2025-03-08 18:46:02.292 - debug: kecontact.0 (118391) UDP datagram from 192.168.5.25:7090: "{"E pres": 37671}"
2025-03-08 18:46:03.716 - debug: kecontact.0 (118391) Sent "report 2" to 192.168.5.25:7090
2025-03-08 18:46:03.718 - debug: kecontact.0 (118391) UDP datagram from 192.168.5.25:7090: "{
"ID": "2",
"State": 3,
"Error1": 0,
"Error2": 0,
"Plug": 7,
"AuthON": 1,
"Authreq": 0,
"Enable sys": 1,
"Enable user": 1,
"Max curr": 16000,
"Max curr %": 266,
"Curr HW": 16000,
"Curr user": 16000,
"Curr FS": 0,
"Tmo FS": 0,
"Curr timer": 16000,
"Tmo CT": 0,
"Setenergy": 0,
"Output": 1,
"Input": 1,
"X2 phaseSwitch source": 4,
"X2 phaseSwitch": 1,
"Serial": "28345628",
"Sec": 1904014
}
"
2025-03-08 18:46:04.015 - debug: kecontact.0 (118391) Sent "report 3" to 192.168.5.25:7090
2025-03-08 18:46:04.017 - debug: kecontact.0 (118391) UDP datagram from 192.168.5.25:7090: "{
"ID": "3",
"U1": 224,
"U2": 227,
"U3": 229,
"I1": 15745,
"I2": 15708,
"I3": 15663,
"P": 10700737,
"PF": 1000,
"E pres": 37716,
"E total": 555646,
"Serial": "28345628",
"Sec": 1904014
}
"
2025-03-08 18:46:04.082 - debug: kecontact.0 (118391) current max current is 16000
2025-03-08 18:46:04.082 - debug: kecontact.0 (118391) amperage of mains: 24230/19140/18140, amperage of charging station: 15745/15708/15663 => available: 23515/28568/29523
2025-03-08 18:46:04.082 - debug: kecontact.0 (118391) Available max amperage: 23500
2025-03-08 18:46:04.082 - debug: kecontact.0 (118391) Available surplus: -3299.763000000001
2025-03-08 18:46:04.316 - debug: kecontact.0 (118391) Sent "report 100" to 192.168.5.25:7090
2025-03-08 18:46:04.317 - debug: kecontact.0 (118391) UDP datagram from 192.168.5.25:7090: "{
"ID": "100",
"Session ID": 28,
"Curr HW": 16000,
"E start": 517930,
"E pres": 37730,
"started[s]": 1741452594,
"ended[s]": 0,
"started": "2025-03-08 16:49:54.000",
"ended": "0",
"reason": 5,
"timeQ": 0,
"RFID tag": "043a573aa0169000",
"RFID class": "55d0a976000000000000",
"Serial": "28345628",
"Sec": 1904015
}
"
2025-03-08 18:46:04.318 - debug: kecontact.0 (118391) History ID received: 00
2025-03-08 18:46:05.764 - debug: kecontact.0 (118391) UDP datagram from 192.168.5.25:7090: "{"E pres": 37775}"
2025-03-08 18:46:05.805 - debug: kecontact.0 (118391) UDP datagram from 192.168.5.24:7090: "{
"ID": "2",
"State": 3,
"Error1": 0,
"Error2": 0,
"Plug": 7,
"AuthON": 0,
"Authreq": 0,
"Enable sys": 1,
"Enable user": 1,
"Max curr": 16000,
"Max curr %": 266,
"Curr HW": 16000,
"Curr user": 16000,
"Curr FS": 0,
"Tmo FS": 0,
"Curr timer": 16000,
"Tmo CT": 0,
"Setenergy": 0,
"Output": 0,
"Input": 0,
"X2 phaseSwitch source": 0,
"X2 phaseSwitch": 0,
"Serial": "17405468",
"Sec": 770885
}
"
2025-03-08 18:46:05.848 - debug: kecontact.0 (118391) Search can't be optimized because wildcard not at the end, fallback to keys!: function(doc) { if (doc.type === 'state') emit(doc._id, doc) }
2025-03-08 18:46:05.925 - debug: kecontact.0 (118391) Message from 192.168.5.24 send to kecontact.1
2025-03-08 18:46:06.105 - debug: kecontact.0 (118391) UDP datagram from 192.168.5.24:7090: "{
"ID": "3",
"U1": 224,
"U2": 227,
"U3": 229,
"I1": 6207,
"I2": 4,
"I3": 4,
"P": 1351461,
"PF": 968,
"E pres": 26533,
"E total": 76992794,
"Serial": "17405468",
"Sec": 770886
}
"
2025-03-08 18:46:06.106 - debug: kecontact.0 (118391) Search can't be optimized because wildcard not at the end, fallback to keys!: function(doc) { if (doc.type === 'state') emit(doc._id, doc) }
2025-03-08 18:46:06.181 - debug: kecontact.0 (118391) Message from 192.168.5.24 send to kecontact.1
2025-03-08 18:46:06.404 - debug: kecontact.0 (118391) UDP datagram from 192.168.5.24:7090: "{
"ID": "100",
"Session ID": 2664,
"Curr HW": 16000,
"E start": 76966261,
"E pres": 26535,
"started[s]": 1741452712,
"ended[s]": 0,
"started": "2025-03-08 16:51:52.000",
"ended": "0",
"reason": 5,
"timeQ": 0,
"RFID tag": "0000000000000000",
"RFID class": "00000000000000000000",
"Serial": "17405468",
"Sec": 770886
}
"
2025-03-08 18:46:06.405 - debug: kecontact.0 (118391) Search can't be optimized because wildcard not at the end, fallback to keys!: function(doc) { if (doc.type === 'state') emit(doc._id, doc) }
2025-03-08 18:46:06.481 - debug: kecontact.0 (118391) Message from 192.168.5.24 send to kecontact.1
2025-03-08 18:46:07.292 - debug: kecontact.0 (118391) UDP datagram from 192.168.5.24:7090: "{"E pres": 26539}"
2025-03-08 18:46:07.293 - debug: kecontact.0 (118391) UDP broadcast datagram from 192.168.5.24:7090: "{"E pres": 26539}"
2025-03-08 18:46:07.293 - debug: kecontact.0 (118391) Search can't be optimized because wildcard not at the end, fallback to keys!: function(doc) { if (doc.type === 'state') emit(doc._id, doc) }
2025-03-08 18:46:07.373 - debug: kecontact.0 (118391) Message from 192.168.5.24 send to kecontact.1
2025-03-08 18:46:07.392 - debug: kecontact.0 (118391) UDP broadcast datagram from 192.168.5.24:7090: "{"E pres": 26539}"
2025-03-08 18:46:09.019 - debug: kecontact.0 (118391) UDP datagram from 192.168.5.25:7090: "{"E pres": 37871}"
2025-03-08 18:46:12.491 - debug: kecontact.0 (118391) UDP datagram from 192.168.5.25:7090: "{"E pres": 37974}"
2025-03-08 18:46:15.746 - debug: kecontact.0 (118391) UDP datagram from 192.168.5.25:7090: "{"E pres": 38072}"
2025-03-08 18:46:18.715 - debug: kecontact.0 (118391) Sent "report 2" to 192.168.5.25:7090
2025-03-08 18:46:18.717 - debug: kecontact.0 (118391) UDP datagram from 192.168.5.25:7090: "{
"ID": "2",
"State": 3,
"Error1": 0,
"Error2": 0,
"Plug": 7,
"AuthON": 1,
"Authreq": 0,
"Enable sys": 1,
"Enable user": 1,
"Max curr": 16000,
"Max curr %": 266,
"Curr HW": 16000,
"Curr user": 16000,
"Curr FS": 0,
"Tmo FS": 0,
"Curr timer": 16000,
"Tmo CT": 0,
"Setenergy": 0,
"Output": 1,
"Input": 1,
"X2 phaseSwitch source": 4,
"X2 phaseSwitch": 1,
"Serial": "28345628",
"Sec": 1904029
}
"
2025-03-08 18:46:19.016 - debug: kecontact.0 (118391) Sent "report 3" to 192.168.5.25:7090
2025-03-08 18:46:19.017 - debug: kecontact.0 (118391) UDP datagram from 192.168.5.25:7090: "{
"ID": "3",
"U1": 223,
"U2": 226,
"U3": 229,
"I1": 15784,
"I2": 15750,
"I3": 15705,
"P": 10702470,
"PF": 1000,
"E pres": 38168,
"E total": 556098,
"Serial": "28345628",
"Sec": 1904029
}
"
2025-03-08 18:46:19.078 - debug: kecontact.0 (118391) current max current is 16000
2025-03-08 18:46:19.079 - debug: kecontact.0 (118391) amperage of mains: 23930/19210/18160, amperage of charging station: 15784/15750/15705 => available: 23854/28540/29545
2025-03-08 18:46:19.079 - debug: kecontact.0 (118391) Available max amperage: 24000
2025-03-08 18:46:19.079 - debug: kecontact.0 (118391) Available surplus: -3230.9300000000003
2025-03-08 18:46:19.079 - debug: kecontact.0 (118391) pvAutomaticsActive: false, vehicleIsPlugged: true
2025-03-08 18:46:19.079 - debug: kecontact.0 (118391) new current due to vehicle not plugged or pv automatics not active is 16000
2025-03-08 18:46:19.079 - debug: kecontact.0 (118391) wallbox set to charging maximum of 16000 mA
2025-03-08 18:46:19.218 - debug: kecontact.0 (118391) UDP datagram from 192.168.5.25:7090: "{"E pres": 38174}"
2025-03-08 18:46:19.316 - debug: kecontact.0 (118391) Sent "report 100" to 192.168.5.25:7090
2025-03-08 18:46:19.317 - debug: kecontact.0 (118391) UDP datagram from 192.168.5.25:7090: "{
"ID": "100",
"Session ID": 28,
"Curr HW": 16000,
"E start": 517930,
"E pres": 38174,
"started[s]": 1741452594,
"ended[s]": 0,
"started": "2025-03-08 16:49:54.000",
"ended": "0",
"reason": 5,
"timeQ": 0,
"RFID tag": "043a573aa0169000",
"RFID class": "55d0a976000000000000",
"Serial": "28345628",
"Sec": 1904030
}
"
2025-03-08 18:46:19.318 - debug: kecontact.0 (118391) History ID received: 00
2025-03-08 18:46:20.806 - debug: kecontact.0 (118391) UDP datagram from 192.168.5.24:7090: "{
"ID": "2",
"State": 3,
"Error1": 0,
"Error2": 0,
"Plug": 7,
"AuthON": 0,
"Authreq": 0,
"Enable sys": 1,
"Enable user": 1,
"Max curr": 16000,
"Max curr %": 266,
"Curr HW": 16000,
"Curr user": 16000,
"Curr FS": 0,
"Tmo FS": 0,
"Curr timer": 16000,
"Tmo CT": 0,
"Setenergy": 0,
"Output": 0,
"Input": 0,
"X2 phaseSwitch source": 0,
"X2 phaseSwitch": 0,
"Serial": "17405468",
"Sec": 770900
}
"
2025-03-08 18:46:20.809 - debug: kecontact.0 (118391) Search can't be optimized because wildcard not at the end, fallback to keys!: function(doc) { if (doc.type === 'state') emit(doc._id, doc) }
2025-03-08 18:46:20.885 - debug: kecontact.0 (118391) Message from 192.168.5.24 send to kecontact.1
2025-03-08 18:46:21.106 - debug: kecontact.0 (118391) UDP datagram from 192.168.5.24:7090: "{
"ID": "3",
"U1": 223,
"U2": 226,
"U3": 229,
"I1": 6208,
"I2": 5,
"I3": 4,
"P": 1345905,
"PF": 968,
"E pres": 26589,
"E total": 76992850,
"Serial": "17405468",
"Sec": 770901
}
"
2025-03-08 18:46:21.107 - debug: kecontact.0 (118391) Search can't be optimized because wildcard not at the end, fallback to keys!: function(doc) { if (doc.type === 'state') emit(doc._id, doc) }
2025-03-08 18:46:21.173 - debug: kecontact.0 (118391) Message from 192.168.5.24 send to kecontact.1
2025-03-08 18:46:21.407 - debug: kecontact.0 (118391) UDP datagram from 192.168.5.24:7090: "{
"ID": "100",
"Session ID": 2664,
"Curr HW": 16000,
"E start": 76966261,
"E pres": 26592,
"started[s]": 1741452712,
"ended[s]": 0,
"started": "2025-03-08 16:51:52.000",
"ended": "0",
"reason": 5,
"timeQ": 0,
"RFID tag": "0000000000000000",
"RFID class": "00000000000000000000",
"Serial": "17405468",
"Sec": 770901
}
"
2025-03-08 18:46:21.407 - debug: kecontact.0 (118391) Search can't be optimized because wildcard not at the end, fallback to keys!: function(doc) { if (doc.type === 'state') emit(doc._id, doc) }
2025-03-08 18:46:21.432 - debug: kecontact.0 (118391) Message from 192.168.5.24 send to kecontact.1
2025-03-08 18:46:22.473 - debug: kecontact.0 (118391) UDP datagram from 192.168.5.25:7090: "{"E pres": 38271}"
2025-03-08 18:46:25.945 - debug: kecontact.0 (118391) UDP datagram from 192.168.5.25:7090: "{"E pres": 38375}"
2025-03-08 18:46:29.200 - debug: kecontact.0 (118391) UDP datagram from 192.168.5.25:7090: "{"E pres": 38471}"
2025-03-08 18:46:32.672 - debug: kecontact.0 (118391) UDP datagram from 192.168.5.25:7090: "{"E pres": 38574}"
2025-03-08 18:46:33.715 - debug: kecontact.0 (118391) Sent "report 2" to 192.168.5.25:7090
2025-03-08 18:46:33.717 - debug: kecontact.0 (118391) UDP datagram from 192.168.5.25:7090: "{
"ID": "2",
"State": 3,
"Error1": 0,
"Error2": 0,
"Plug": 7,
"AuthON": 1,
"Authreq": 0,
"Enable sys": 1,
"Enable user": 1,
"Max curr": 16000,
"Max curr %": 266,
"Curr HW": 16000,
"Curr user": 16000,
"Curr FS": 0,
"Tmo FS": 0,
"Curr timer": 16000,
"Tmo CT": 0,
"Setenergy": 0,
"Output": 1,
"Input": 1,
"X2 phaseSwitch source": 4,
"X2 phaseSwitch": 1,
"Serial": "28345628",
"Sec": 1904044
}
"
2025-03-08 18:46:34.016 - debug: kecontact.0 (118391) Sent "report 3" to 192.168.5.25:7090
2025-03-08 18:46:34.017 - debug: kecontact.0 (118391) UDP datagram from 192.168.5.25:7090: "{
"ID": "3",
"U1": 224,
"U2": 227,
"U3": 229,
"I1": 15735,
"I2": 15688,
"I3": 15660,
"P": 10692390,
"PF": 999,
"E pres": 38613,
"E total": 556543,
"Serial": "28345628",
"Sec": 1904044
}
"
2025-03-08 18:46:34.076 - debug: kecontact.0 (118391) current max current is 16000
2025-03-08 18:46:34.076 - debug: kecontact.0 (118391) amperage of mains: 23980/19170/18170, amperage of charging station: 15735/15688/15660 => available: 23755/28518/29490
2025-03-08 18:46:34.076 - debug: kecontact.0 (118391) Available max amperage: 24000
2025-03-08 18:46:34.076 - debug: kecontact.0 (118391) Available surplus: -3212.91
2025-03-08 18:46:34.108 - debug: kecontact.0 (118391) UDP datagram from 192.168.5.24:7090: "{"E pres": 26640}"
2025-03-08 18:46:34.108 - debug: kecontact.0 (118391) UDP broadcast datagram from 192.168.5.24:7090: "{"E pres": 26640}"
2025-03-08 18:46:34.152 - debug: kecontact.0 (118391) Search can't be optimized because wildcard not at the end, fallback to keys!: function(doc) { if (doc.type === 'state') emit(doc._id, doc) }
2025-03-08 18:46:34.221 - debug: kecontact.0 (118391) UDP broadcast datagram from 192.168.5.24:7090: "{"E pres": 26640}"
2025-03-08 18:46:34.229 - debug: kecontact.0 (118391) Message from 192.168.5.24 send to kecontact.1
2025-03-08 18:46:34.316 - debug: kecontact.0 (118391) Sent "report 100" to 192.168.5.25:7090
2025-03-08 18:46:34.317 - debug: kecontact.0 (118391) UDP datagram from 192.168.5.25:7090: "{
"ID": "100",
"Session ID": 28,
"Curr HW": 16000,
"E start": 517930,
"E pres": 38619,
"started[s]": 1741452594,
"ended[s]": 0,
"started": "2025-03-08 16:49:54.000",
"ended": "0",
"reason": 5,
"timeQ": 0,
"RFID tag": "043a573aa0169000",
"RFID class": "55d0a976000000000000",
"Serial": "28345628",
"Sec": 1904045
}
"
2025-03-08 18:46:34.318 - debug: kecontact.0 (118391) History ID received: 00
2025-03-08 18:46:35.807 - debug: kecontact.0 (118391) UDP datagram from 192.168.5.24:7090: "{
"ID": "2",
"State": 3,
"Error1": 0,
"Error2": 0,
"Plug": 7,
"AuthON": 0,
"Authreq": 0,
"Enable sys": 1,
"Enable user": 1,
"Max curr": 16000,
"Max curr %": 266,
"Curr HW": 16000,
"Curr user": 16000,
"Curr FS": 0,
"Tmo FS": 0,
"Curr timer": 16000,
"Tmo CT": 0,
"Setenergy": 0,
"Output": 0,
"Input": 0,
"X2 phaseSwitch source": 0,
"X2 phaseSwitch": 0,
"Serial": "17405468",
"Sec": 770915
}
"
2025-03-08 18:46:35.809 - debug: kecontact.0 (118391) Search can't be optimized because wildcard not at the end, fallback to keys!: function(doc) { if (doc.type === 'state') emit(doc._id, doc) }
2025-03-08 18:46:35.877 - debug: kecontact.0 (118391) Message from 192.168.5.24 send to kecontact.1
2025-03-08 18:46:35.927 - debug: kecontact.0 (118391) UDP datagram from 192.168.5.25:7090: "{"E pres": 38671}"
2025-03-08 18:46:36.106 - debug: kecontact.0 (118391) UDP datagram from 192.168.5.24:7090: "{
"ID": "3",
"U1": 224,
"U2": 227,
"U3": 229,
"I1": 6185,
"I2": 6,
"I3": 4,
"P": 1347412,
"PF": 969,
"E pres": 26646,
"E total": 76992907,
"Serial": "17405468",
"Sec": 770916
}
"
2025-03-08 18:46:36.107 - debug: kecontact.0 (118391) Search can't be optimized because wildcard not at the end, fallback to keys!: function(doc) { if (doc.type === 'state') emit(doc._id, doc) }
2025-03-08 18:46:36.173 - debug: kecontact.0 (118391) Message from 192.168.5.24 send to kecontact.1
2025-03-08 18:46:36.407 - debug: kecontact.0 (118391) UDP datagram from 192.168.5.24:7090: "{
"ID": "100",
"Session ID": 2664,
"Curr HW": 16000,
"E start": 76966261,
"E pres": 26647,
"started[s]": 1741452712,
"ended[s]": 0,
"started": "2025-03-08 16:51:52.000",
"ended": "0",
"reason": 5,
"timeQ": 0,
"RFID tag": "0000000000000000",
"RFID class": "00000000000000000000",
"Serial": "17405468",
"Sec": 770916
}
"
2025-03-08 18:46:36.407 - debug: kecontact.0 (118391) Search can't be optimized because wildcard not at the end, fallback to keys!: function(doc) { if (doc.type === 'state') emit(doc._id, doc) }
2025-03-08 18:46:36.477 - debug: kecontact.0 (118391) Message from 192.168.5.24 send to kecontact.1
2025-03-08 18:46:39.399 - debug: kecontact.0 (118391) UDP datagram from 192.168.5.25:7090: "{"E pres": 38774}"
2025-03-08 18:46:42.654 - debug: kecontact.0 (118391) UDP datagram from 192.168.5.25:7090: "{"E pres": 38871}"
2025-03-08 18:46:46.126 - debug: kecontact.0 (118391) UDP datagram from 192.168.5.25:7090: "{"E pres": 38975}"