M-TEC Energy Butler
-
@homoran sagte in M-TEC Energy Butler:
ist das nicht die Geräte ID?
Mahhhh, richtig
Der Fehler ist jetzt einmal weg, bleiben aber noch genügend andere
modbus.0 2023-06-23 21:45:17.734 warn Poll error count: 1 code: "ReadInputRegisters: Invalid FC 3" modbus.0 2023-06-23 21:45:17.701 error unknown function code: 0x0, 0xef modbus.0 2023-06-23 21:45:17.636 error unknown function code: 0x0, 0x0 modbus.0 2023-06-23 21:45:17.620 error Wrong CRC for frame: 0,3,20,144,90,247,3,128,232,0,18,120,165,247,3,36,21,8,39,15,0,2,0,248,255 modbus.0 2023-06-23 21:45:17.527 error Wrong CRC for frame: 247,3,117,248,0,60,202,176,247,3,120,9,74,0,5,19,136,0,0,0,0,0,41,0,0,0,0,0,0,0,0,9,64,0,37,19,134,0,0,0,0,2,225,0,0,0,0,0,0,0,0,9,82,0,3,19,139,0,0,0,0,0,27,0,0,0,0,0,0,0,0,0,0,3,37,0,0,0,0,0,0,0,0,0,0,0,82,0,0,0,0,0,0,0,0,0,0,3,7,0,0,0,0,0,0,0,0,0,0,0,85,0,0,0,0,0,0,0,0,9,29,0 modbus.0 2023-06-23 21:45:17.341 error Wrong CRC for frame: 1,1,0,0,0 modbus.0 2023-06-23 21:45:17.320 error unknown function code: 0x0, 0x40 modbus.0 2023-06-23 21:45:17.317 error unknown function code: 0x0, 0x0 modbus.0 2023-06-23 21:45:17.285 error unknown function code: 0x26, 0x0 modbus.0 2023-06-23 21:45:17.269 error unknown function code: 0x0, 0x0 modbus.0 2023-06-23 21:45:17.253 error Wrong CRC for frame: 247,3,42,254,0,60,56,165,247,3,120,16,41,16,34,16,35,9,78,0,9,9,83,0,34,9,83,0,10,19,134,0,0,3,25,0,0,1,36,0,0,1,129,0,0,0,31 modbus.0 2023-06-23 21:45:17.148 error unknown function code: 0x0, 0x0 modbus.0 2023-06-23 21:45:17.125 error unknown function code: 0x0, 0x0 modbus.0 2023-06-23 21:45:17.116 error unknown function code: 0x22, 0x0 modbus.0 2023-06-23 21:45:17.095 error Wrong CRC for frame: 247,3,39,16,0,11,27,234,247,3,22,90,49,49,50,51,48,48,50,48,56,51,51,48,50,54,49,30,6,0,0,0,0,190,217,247,3,39,121,0,17,74,61,247 modbus.0 2023-06-23 21:45:16.064 debug [DevID_247/inputRegs] Poll address 2999 - 1 registers modbus.0 2023-06-23 21:45:16.055 debug Initialization of scale factors done! modbus.0 2023-06-23 21:45:16.042 debug [DevID_247] Poll start --------------------- modbus.0 2023-06-23 21:45:16.041 info Connected to slave -
@metaxa wrong crc hab ich noch nie gehabt
A/B richtig rum? -
@homoran sagte in M-TEC Energy Butler:
A/B richtig rum?
Wie gesagt, mein Elektriker hat das gemacht. Aber ich springe mal in den Keller und tausche A/B um.
@homoran sagte in M-TEC Energy Butler:
hast du den Waveshare?
Ja, den von dir empfohlenen (habe ihn auf 5V geschalten seitlich).
-
@metaxa sagte in M-TEC Energy Butler:
, den von dir empfohlenen
da hatcder Elektriker auch angeklemmt?
-
@homoran sagte in M-TEC Energy Butler:
da hatcder Elektriker auch angeklemmt?
Ja, aber nur am Stecker
Könnte diese Einstellung auch falsch sein?
Ich gehe jetzt einmal umklemmen
-
@metaxa sagte in M-TEC Energy Butler:
Könnte diese Einstellung auch falsch sein?
ja, aber die hätte ich auch genommen.
Ab jetzt fische ich auch im trüben und würde in den allgemeinen Parametern spielen.
Alias mal aus -> was dann?
und auch die anderen Checkboxen mal testen -
@metaxa sagte in M-TEC Energy Butler:
Ich gehe jetzt einmal umklemmen
Uiiiiiii ..... das sind mehr Fehler als vorher
modbus.0 2023-06-23 21:59:39.687 info Disconnected from slave modbus.0 2023-06-23 21:59:39.583 error Wrong CRC for frame: 255,1,2,2,52,252,255 modbus.0 2023-06-23 21:59:39.567 error unknown function code: 0x0, 0x4 modbus.0 2023-06-23 21:59:39.552 error unknown function code: 0x7e, 0xb5 modbus.0 2023-06-23 21:59:39.500 error Error response: ff modbus.0 2023-06-23 21:59:39.491 error Error response: fd modbus.0 2023-06-23 21:59:39.470 error unknown function code: 0x7e, 0xdb modbus.0 2023-06-23 21:59:39.441 error unknown function code: 0x7e, 0x5e modbus.0 2023-06-23 21:59:39.393 error Error response: e2 modbus.0 2023-06-23 21:59:39.381 error Error response: ff modbus.0 2023-06-23 21:59:39.366 error Error response: ff modbus.0 2023-06-23 21:59:39.348 error Error response: ff modbus.0 2023-06-23 21:59:39.336 error Error response: f9 modbus.0 2023-06-23 21:59:39.318 error Error response: ff modbus.0 2023-06-23 21:59:39.302 error unknown function code: 0x65, 0xff modbus.0 2023-06-23 21:59:39.297 error Error response: ff modbus.0 2023-06-23 21:59:39.282 error Error response: af modbus.0 2023-06-23 21:59:39.277 error Error response: fe modbus.0 2023-06-23 21:59:39.259 error unknown function code: 0x0, 0x4 modbus.0 2023-06-23 21:59:39.242 error unknown function code: 0x0, 0x4 modbus.0 2023-06-23 21:59:39.182 error Error response: ff modbus.0 2023-06-23 21:59:39.174 error Error response: a9 modbus.0 2023-06-23 21:59:39.158 error Error response: ff modbus.0 2023-06-23 21:59:39.144 error Error response: ff modbus.0 2023-06-23 21:59:39.129 error Error response: fd modbus.0 2023-06-23 21:59:39.110 error Error response: ff modbus.0 2023-06-23 21:59:39.093 error Error response: eb modbus.0 2023-06-23 21:59:39.075 error Wrong CRC for frame: 0,4,126,181,131,239,13,58,0,4,126,247,255,255,255,1,2,2,140,252,255,255,241,255,255,255,255,3,93,0,4,126,108,247,233,201,43,0,4,126,186,169,103,103,179,102,246,182,246,246,44,150,246,182,54,214,54,110,255,255,255,255,131,154,0,4,126,108,67,221,107,133,0,4,126,183,251,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,81,94,0,4,126,181,128,135,143,181,0,4,126,232,183,251,151,247,151,107,97,255 modbus.0 2023-06-23 21:59:38.686 warn Poll error count: 1 code: {"err":"timeout","timeout":5000} modbus.0 2023-06-23 21:59:38.685 error Request timed out. modbus.0 2023-06-23 21:59:38.684 warn Error: undefined modbus.0 2023-06-23 21:59:36.679 error Error response: e7 modbus.0 2023-06-23 21:59:36.664 error Error response: fb modbus.0 2023-06-23 21:59:36.657 error Error response: fb modbus.0 2023-06-23 21:59:36.641 error unknown function code: 0x7e, 0xdb modbus.0 2023-06-23 21:59:36.626 error unknown function code: 0x7e, 0x5e modbus.0 2023-06-23 21:59:36.570 error Error response: 52 modbus.0 2023-06-23 21:59:36.564 error Error response: ff modbus.0 2023-06-23 21:59:36.548 error Error response: ff modbus.0 2023-06-23 21:59:36.532 error Error response: ff modbus.0 2023-06-23 21:59:36.523 error Error response: f9 modbus.0 2023-06-23 21:59:36.504 error Error response: ff modbus.0 2023-06-23 21:59:36.489 error unknown function code: 0x65, 0xff modbus.0 2023-06-23 21:59:36.483 error Error response: ff modbus.0 2023-06-23 21:59:36.467 error unknown function code: 0x79, 0xff modbus.0 2023-06-23 21:59:36.462 error Error response: f3 modbus.0 2023-06-23 21:59:36.444 error unknown function code: 0x0, 0x4 modbus.0 2023-06-23 21:59:36.428 error Wrong CRC for frame: 0,4,126,232,247,251,183,247,151,107,103,255,237,237,103,255,183,237,91,255,235,217,243,254,255,249,241,254,255,253,179,255,255,253,249,254,255,255,193,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,253,157,250,129,250,187,250,129,134,115,225,185,255,255,255,253,255,255,255,253,99,191,101,49,198,129,255,255,173,137,254,255,255,251,91,117,225,1,254,225,253,253,255,127,195,169,134,169,174,111,159,143,235,239,173,247,253,253,255,255,255,255,255,255,255,255,255,255,37,154,0,4,126,69,224,135 modbus.0 2023-06-23 21:59:36.230 error Wrong CRC for frame: 0,4,126,108,247,233,201,43,0,4,126,186,169,103,103,179,102,246,182,246,246,44,150,246,182,54,214,54,110,255,255,255,255,131,154,0,4,126,108,67,221,107,133,0,4,126,183,251,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,81,94,0,4,126,108,67,221,107,133,0,4,126,183,251,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,81,94,0,4 modbus.0 2023-06-23 21:59:33.671 debug [DevID_247/inputRegs] Poll address 2999 - 1 registers modbus.0 2023-06-23 21:59:33.670 debug Initialization of scale factors done! modbus.0 2023-06-23 21:59:33.667 debug [DevID_247] Poll start --------------------- modbus.0 2023-06-23 21:59:33.665 info Connected to slave modbus.0 2023-06-23 21:59:33.636 debug connect to serial /dev/ttyUSB1 with 9600 modbus.0 2023-06-23 21:59:32.476 debug Initialize Objects for holdingRegs: [] modbus.0 2023-06-23 21:59:32.473 debug Add inputRegisters.33000_State_of_Charge_(SOC): {"_id":"inputRegisters.33000_State_of_Charge_(SOC)","type":"state","common":{"name":"Ladezustand der Batterie","role":"level","type":"number","read":true,"write":false,"def":0,"unit":"%"},"native":{"regType":"inputRegs","address":2999,"deviceId":247,"type":"uint16be","len":1,"offset":0,"factor":1}} modbus.0 2023-06-23 21:59:32.469 debug Initialize Objects for inputRegs: [{"_address":"33000","name":"State of Charge (SOC)","description":"Ladezustand der Batterie","unit":"%","type":"uint16be","len":1,"factor":1,"offset":0,"formula":"","role":"level","room":"","cw":"","isScale":"","address":2999,"deviceId":247,"id":"inputRegisters.33000_State_of_Charge_(SOC)"}] modbus.0 2023-06-23 21:59:32.461 debug Initialize Objects for coils: [] modbus.0 2023-06-23 21:59:32.458 debug Initialize Objects for disInputs: [] modbus.0 2023-06-23 21:59:31.818 info starting. Version 5.0.11 in /opt/iobroker/node_modules/iobroker.modbus, node: v16.19.1, js-controller: 4.0.24Klemme wieder zurück!
-
-
@homoran sagte in M-TEC Energy Butler:
wie blinkt es denn?
Kurz nur die rechte LED flackert nach dem Bestromen blau hört aber nach 2 Sekunden wieder auf und bleibt finster, links Power bleibt brav rot.
-
@metaxa der müsste jede Sekunde Blinken.
Brauchst du so viele Daten? sonst setz das Intervall runter 5000msec müssten vollkommen reichen. -
@homoran
Habe jetzt wieder zurückgeklemmt, paar von diesen 16Bit Einträgen ausprobiert, es kommt immer dieser "Wrong SRC for frame"modbus.0 2023-06-23 22:16:39.630 debug [DevID_247] Poll start --------------------- modbus.0 2023-06-23 22:16:37.896 error Wrong CRC for frame: 247,3,117,248,0,60,202,176,247,3,120,9,71,0,3,19,134,0,0,0,0,0,41,0,0,0,0,0,0,0,0,9,64,0,38,19,136,0,0,0,0,2,161,0,0,0,0,0,0,0,0,9,74,0,3,19,138,0,0,0,0,0,28,0,0,0,0,0,0,0,0,0,0,2,230,0,0,0,0,0,0,0,0,0,0,0,83,0,0,0,0,0,0,0,0,0,0,2,173,0,0,0,0,0,0,0,0,0,0,0,83,0,0,0,0,0,0,0,0,9,27,0 modbus.0 2023-06-23 22:16:37.561 error Error response: 28 modbus.0 2023-06-23 22:16:37.497 error unknown function code: 0x0, 0x0 modbus.0 2023-06-23 22:16:37.486 error Wrong CRC for frame: 247,3,128,232,0,18,120,165,247,3,36,19,92,39,15,0,2,0,244,255,255,255,255,255,255,255,255,0,0,1,1,0,0,0,230,0,0,12,195,0,0,12,183,0,0,0,0,226,200,247,3,42,242,0,8,249,113,247,3,16,0,0,0,0,255,255,255,243,0,0,0,7,0,0,0,0,235,1,247,3,39,16,0,11,27,234,247,3,22,90,49,49,50,51,48,48,50,48,56,51,51,48,50,54,49,30,6,0,0,0,0,190,217,247,3,39,121,0,17,74,61,247,3,34,0,2,0,0,0,0,0,0,0 modbus.0 2023-06-23 22:16:35.088 error Wrong CRC for frame: 247,3,117,248,0,60,202,176,247,3,120,9,67,0,5,19,134,0,0,0,0,0,42,0,0,0,0,0,0,0,0,9,67,0,36,19,134,0,0,0,0,2,166,0,0,0,0,0,0,0,0,9,74,0,3,19,138,0,0,0,0,0,27,0,0,0,0,0,0,0,0,0,0,2,235,0,0,0,0,0,0,0,0,0,0,0,83,0,0,0,0,0,0,0,0,0,0,2,184,0,0,0,0,0,0,0,0,0,0,0,85,0,0,0,0,0,0,0,0,9,28,0 modbus.0 2023-06-23 22:16:34.750 error unknown function code: 0x28, 0xf7 modbus.0 2023-06-23 22:16:34.687 error Wrong CRC for frame: 247,3,39,121,0,17,74,61,247,3,34,0,2,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0 modbus.0 2023-06-23 22:16:34.589 error unknown function code: 0x0, 0x0 modbus.0 2023-06-23 22:16:34.574 error Wrong CRC for frame: 247,3,42,242,0,8,249,113,247,3,16,0,0,0,0,0,0,0,13,0,0,0,7,0,0,0,26,115,95,247,3,39,16,0,11,27,234,247,3,22,90,49,49,50,51,48,48 modbus.0 2023-06-23 22:16:32.338 error Error response: Value is not accepted by slave modbus.0 2023-06-23 22:16:32.337 error Error response for FCx119: Illegal Data Value modbus.0 2023-06-23 22:16:32.275 error Wrong CRC for frame: 247,3,117,248,0,60,202,176,247,3,120,9,69,0,5,19,134,0,0,0,0,0,42,0,0,0,0,0,0,0,0,9,62,0,35,19,134,0,0,0,0,2,162,0,0,0,0,0,0,0,0,9,76,0,2,19,134,0,0,0,0,0,27,0,0,0,0,0,0,0,0,0,0,2,231,0,0,0,0,0,0,0,0,0,0,0,84,0,0,0,0,0,0,0,0,0,0,2,237,0,0,0,0,0,0,0,0,0,0,0,85,0,0,0,0,0,0,0,0,9,28,0 modbus.0 2023-06-23 22:16:31.940 error Error response: 28 modbus.0 2023-06-23 22:16:31.879 error unknown function code: 0x0, 0x0 modbus.0 2023-06-23 22:16:31.861 error unknown function code: 0x0, 0x0 modbus.0 2023-06-23 22:16:31.843 error unknown function code: 0x3d, 0xf7 modbus.0 2023-06-23 22:16:31.835 error unknown function code: 0x0, 0xbe modbus.0 2023-06-23 22:16:31.766 error Wrong CRC for frame: 247,3,42,242,0,8,249,113,247,3,16,0,0,0,0,0,0,0,20,0,0,0,7,0,0,0,33,149,28,247,3,39,16,0,11,27,234,247,3,22,90,49,49,50,51,48,48 modbus.0 2023-06-23 22:16:29.577 warn Poll error count: 1 code: "ReadInputRegisters: Invalid FC 3" modbus.0 2023-06-23 22:16:29.527 error Error response: f7 modbus.0 2023-06-23 22:16:29.468 error unknown function code: 0x0, 0x0 modbus.0 2023-06-23 22:16:29.447 error unknown function code: 0x0, 0x0 modbus.0 2023-06-23 22:16:29.432 error unknown function code: 0x53, 0x0 modbus.0 2023-06-23 22:16:29.416 error unknown function code: 0x0, 0x0 modbus.0 2023-06-23 22:16:29.400 error unknown function code: 0x13, 0x86 modbus.0 2023-06-23 22:16:29.384 error unknown function code: 0x0, 0x2 modbus.0 2023-06-23 22:16:29.371 error Wrong CRC for frame: 0,3,247,3,39,16,0,11,27,234,247,3,22,90,49,49,50,51,48,48,50,48,56,51,51,48,50,54,49,30,6,0,0,0,0,190,217,247,3,39,121,0,17,74,61,247,3,34,0,2,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,215,40,247,3,42,254,0,60,56,165,247,3,120,16,25,16,24,16,29,9,73,0,9,9,76,0,32,9,77,0,10,19,135,0,0,3,1,0,0,1,41,0,0,1,134,0,0,0,31,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,1,176,1,190,1,161,1,190,30,63,15,30,0,0,0,1,0,0,0,1,78,32,78,6,78,45,0,0,41,187,0,0,0,2,81,199,15,255,0,15,1,1,0,64,30,163,30,163,19,93,48,56,10,8,41,4,1,1,0,0,0,0,0,0,0,0,0,0,245,199,247,3,117,248,0,60,202,176,247,3,120,9,68,0,5,19,134,0,0,0,0,0,42,0,0,0,0,0,0,0,0,9,66,0,37 modbus.0 2023-06-23 22:16:28.445 debug [DevID_247/inputRegs] Poll address 2999 - 1 registers modbus.0 2023-06-23 22:16:28.444 debug Initialization of scale factors done! modbus.0 2023-06-23 22:16:28.440 debug [DevID_247] Poll start --------------------- modbus.0 2023-06-23 22:16:28.438 info Connected to slave modbus.0 2023-06-23 22:16:28.415 debug connect to serial /dev/ttyUSB1 with 9600 modbus.0 2023-06-23 22:16:27.710 debug Initialize Objects for holdingRegs: [] modbus.0 2023-06-23 22:16:27.709 debug Add inputRegisters.2999_State_of_Charge_(SOC): {"_id":"inputRegisters.2999_State_of_Charge_(SOC)","type":"state","common":{"name":"Ladezustand der Batterie","role":"level","type":"number","read":true,"write":false,"def":0,"unit":"%"},"native":{"regType":"inputRegs","address":2999,"deviceId":247,"type":"int16le","len":1,"offset":0,"factor":1}} modbus.0 2023-06-23 22:16:27.708 debug Initialize Objects for inputRegs: [{"_address":2999,"name":"State of Charge (SOC)","description":"Ladezustand der Batterie","unit":"%","type":"int16le","len":1,"factor":1,"offset":0,"formula":"","role":"level","room":"","cw":false,"isScale":"","address":2999,"deviceId":247,"id":"inputRegisters.2999_State_of_Charge_(SOC)"}] modbus.0 2023-06-23 22:16:27.707 debug Initialize Objects for coils: [] modbus.0 2023-06-23 22:16:27.706 debug Initialize Objects for disInputs: [] modbus.0 2023-06-23 22:16:27.222 info starting. Version 5.0.11 in /opt/iobroker/node_modules/iobroker.modbus, node: v16.19.1, js-controller: 4.0.24alais Checkbox hat nix verändert.
-
Kann ich aus dem LOG erkennen ob da am anderen Ende überhaupt Daten sind, die Busschnittstelle die richtige ist?
-
@metaxa das versuche ich die ganze Zeit zu erkennen.
was sagt dennlsusb? -
@homoran sagte in M-TEC Energy Butler:
lsusb
andreas@iOProduktiv:~$ lsusb -t /: Bus 07.Port 1: Dev 1, Class=root_hub, Driver=uhci_hcd/2p, 12M /: Bus 06.Port 1: Dev 1, Class=root_hub, Driver=uhci_hcd/2p, 12M /: Bus 05.Port 1: Dev 1, Class=root_hub, Driver=xhci_hcd/4p, 5000M /: Bus 04.Port 1: Dev 1, Class=root_hub, Driver=uhci_hcd/2p, 12M |__ Port 1: Dev 2, If 0, Class=Vendor Specific Class, Driver=ch341, 12M |__ Port 2: Dev 5, If 0, Class=Vendor Specific Class, Driver=ftdi_sio, 12M /: Bus 03.Port 1: Dev 1, Class=root_hub, Driver=xhci_hcd/4p, 480M |__ Port 1: Dev 2, If 0, Class=Human Interface Device, Driver=usbfs, 12M /: Bus 02.Port 1: Dev 1, Class=root_hub, Driver=uhci_hcd/2p, 12M |__ Port 1: Dev 2, If 0, Class=Human Interface Device, Driver=usbhid, 12M /: Bus 01.Port 1: Dev 1, Class=root_hub, Driver=ehci-pci/6p, 480M andreas@iOProduktiv:~$ ls -l /dev/serial/by-id insgesamt 0 lrwxrwxrwx 1 root root 13 23. Jun 19:53 usb-1a86_USB_Serial-if00-port0 -> ../../ttyUSB0 lrwxrwxrwx 1 root root 13 23. Jun 22:09 usb-FTDI_FT232R_USB_UART_A10N5R2A-if00-port0 -> ../../ttyUSB1 andreas@iOProduktiv:~$ -
@metaxa was hängt denn noch dran?
pi@tinkerboard:~$ ls -l /dev/serial/by-id insgesamt 0 lrwxrwxrwx 1 root root 13 14. Mai 22:54 usb-FTDI_FT232R_USB_UART_A10NBMVW-if00-port0 -> ../../ttyUSB1 lrwxrwxrwx 1 root root 13 14. Mai 22:53 usb-FTDI_FT232R_USB_UART_AB0OH9QR-if00-port0 -> ../../ttyUSB2 lrwxrwxrwx 1 root root 13 14. Mai 22:53 usb-Silicon_Labs_CP2104_USB_to_UART_Bridge_Controller_01066523-if00-port0 -> ../../ttyUSB0ich hab 2 dran
-
@homoran
NUC -->
1x USB für NUT (APC)
1x USB Hub (Hama)
--> ZigbeeStick
--> Waveshare
-
@metaxa dann bist du mit usb1 wohl richtig
-
Ich stehe momentan an, habe keine Idee zur Zeit.
Aber großen Dank zum 100sten Mal für deine Zeit und deine Geduld.
mxa
-
@metaxa Geduld hilft dir nicht wirklich.
Hab keine Ahnung wo so ein Checksummenfehler herkommt und was man tun kann.
ganz tief im Bauch meint jemsnd dass da was in die Leitungen einstreut.Aber glaub ich ehrlich nicht
Dann erst mal gute Nacht
-
@Homoran
Gute Nacht und nochmals Danke! Eventuell findet sich ja noch ein weiterer Modbus - System -Guru und erbarmt sich
