ioBroker funktioniert nicht mehr
-
Hat nicht lange gehalten
Dieses mal wurden wohl die Instanzen nur deaktiviert/gestoppt.Skript v.2023-04-16 *** BASE SYSTEM *** Model : Raspberry Pi 4 Model B Rev 1.4 Architecture : aarch64 Docker : false Virtualization : none Distributor ID: Debian Description: Debian GNU/Linux 11 (bullseye) Release: 11 Codename: bullseye PRETTY_NAME="Debian GNU/Linux 11 (bullseye)" NAME="Debian GNU/Linux" VERSION_ID="11" VERSION="11 (bullseye)" VERSION_CODENAME=bullseye ID=debian HOME_URL="https://www.debian.org/" SUPPORT_URL="https://www.debian.org/support" BUG_REPORT_URL="https://bugs.debian.org/" Systemuptime and Load: 18:17:48 up 19:23, 0 users, load average: 0.00, 0.00, 0.00 CPU threads: 4 Raspberry only: throttled=0x0 Other values than 0x0 hint to temperature/voltage problems temp=52.5'C volt=0.9160V *** Time and Time Zones *** Local time: Wed 2023-08-09 18:17:48 CEST Universal time: Wed 2023-08-09 16:17:48 UTC RTC time: n/a Time zone: Europe/Berlin (CEST, +0200) System clock synchronized: yes NTP service: active RTC in local TZ: no *** User and Groups *** robin /home/robin robin adm dialout cdrom sudo audio video plugdev games users input render netdev gpio i2c spi iobroker *** X-Server-Setup *** X-Server: false Desktop: Terminal: tty Boot Target: multi-user.target *** MEMORY *** total used free shared buff/cache available Mem: 3.8G 255M 3.1G 1.0M 419M 3.5G Swap: 99M 0B 99M Total: 3.9G 255M 3.2G 3794 M total memory 255 M used memory 382 M active memory 192 M inactive memory 3118 M free memory 40 M buffer memory 379 M swap cache 99 M total swap 0 M used swap 99 M free swap Raspberry only: oom events: 0 lifetime oom required: 0 Mbytes total time in oom handler: 0 ms max time spent in oom handler: 0 ms *** FILESYSTEM *** Filesystem Type Size Used Avail Use% Mounted on /dev/root ext4 15G 3.3G 11G 24% / devtmpfs devtmpfs 1.7G 0 1.7G 0% /devtmpfs tmpfs 1.9G 0 1.9G 0% /dev/shm tmpfs tmpfs 759M 1.1M 758M 1% /runtmpfs tmpfs 5.0M 4.0K 5.0M 1% /run/lock /dev/mmcblk0p1 vfat 255M 31M 225M 13% /boot tmpfs tmpfs 380M 0 380M 0% /run/user/1000 Messages concerning ext4 filesystem in dmesg: [Tue Aug 8 22:54:46 2023] Kernel command line: coherent_pool=1M 8250.nr_uarts=0 snd_bcm2835.enable_headphones=0 snd_bcm2835.enable_headphones=1 snd_bcm2835.enable_hdmi=1 snd_bcm2835.enable_hdmi=0 smsc95xx.macaddr=E4:5F:01:26:8F:AE vc_mem.mem_base=0x3ec00000 vc_mem.mem_size=0x40000000 console=ttyS0,115200 console=tty1 root=PARTUUID=105e3ec4-02 rootfstype=ext4 fsck.repair=yes rootwait [Tue Aug 8 22:54:47 2023] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Quota mode: none. [Tue Aug 8 22:54:47 2023] VFS: Mounted root (ext4 filesystem) readonly on device 179:2. [Tue Aug 8 22:54:49 2023] EXT4-fs (mmcblk0p2): re-mounted. Quota mode: none. Show mounted filesystems (real ones only): TARGET SOURCE FSTYPE OPTIONS / /dev/mmcblk0p2 ext4 rw,noatime,commit=600`-/boot /dev/mmcblk0p1 vfat rw,relatime,fmask=0022,dmask=0022,codepage=437,iocharset=ascii,shortname=mixed,errors=remount-ro Files in neuralgic directories: /var: 558M /var/ 180M /var/cache 174M /var/cache/apt 147M /var/lib 131M /var/log Archived and active journals take up 128.0M in the file system. /opt/iobroker/backups: 8.0M /opt/iobroker/backups/ /opt/iobroker/iobroker-data: 181M /opt/iobroker/iobroker-data/ 122M /opt/iobroker/iobroker-data/files 52M /opt/iobroker/iobroker-data/files/javascript.admin 34M /opt/iobroker/iobroker-data/files/javascript.admin/static 33M /opt/iobroker/iobroker-data/files/javascript.admin/static/js The five largest files in iobroker-data are: sort: 20M /opt/iobroker/iobroker-data/objects.jsonl 19M /opt/iobroker/iobroker-data/files/iot.admin/static/js/main.2975a411.js.map 8.2M /opt/iobroker/iobroker-data/files/iot.admin/static/js/main.2975a411.js 7.7M /opt/iobroker/iobroker-data/states.jsonl 6.9M /opt/iobroker/iobroker-data/files/javascript.admin/static/js/610.312d98a8.chunk.js.map write failed: 'standard output': Broken pipe sort: write error *** NodeJS-Installation *** /usr/bin/nodejs v18.17.0 /usr/bin/node v18.17.0 /usr/bin/npm 9.6.7 /usr/bin/npx 9.6.7 nodejs: Installed: 18.17.0-deb-1nodesource1 Candidate: 18.17.0-deb-1nodesource1 Version table: *** 18.17.0-deb-1nodesource1 500 500 https://deb.nodesource.com/node_18.x bullseye/main arm64 Packages 100 /var/lib/dpkg/status 12.22.12~dfsg-1~deb11u4 500 500 http://security.debian.org/debian-security bullseye-security/main arm64 Packages 12.22.12~dfsg-1~deb11u3 500 500 http://deb.debian.org/debian bullseye/main arm64 Packages Temp directories causing npm8 problem: 0 No problems detected *** ioBroker-Installation *** ioBroker Status iobroker is running on this host. Objects type: jsonl States type: jsonl MULTIHOSTSERVICE/enabled: false Core adapters versions js-controller: 4.0.24 admin: 6.3.5 javascript: 7.0.3 Adapters from github: 0 Adapter State system.adapter.admin.0 : admin : raspberrypi4 - disabled, port: 8081, bind: 0.0.0.0, run as: admin system.adapter.backitup.0 : backitup : raspberrypi4 - disabled system.adapter.geofency.0 : geofency : raspberrypi4 - disabled, port: 7999, bind: 0.0.0.0 system.adapter.info.0 : info : raspberrypi4 - disabled system.adapter.iot.0 : iot : raspberrypi4 - disabled system.adapter.javascript.0 : javascript : raspberrypi4 - disabled system.adapter.openknx.0 : openknx : raspberrypi4 - disabled system.adapter.solax.0 : solax : raspberrypi4 - disabled system.adapter.web.0 : web : raspberrypi4 - disabled, port: 8082, bind: 0.0.0.0, run as: admin system.adapter.yahka.0 : yahka : raspberrypi4 - disabled + instance is alive Enabled adapters with bindings ioBroker-Repositories stable : http://download.iobroker.net/sources-dist.json beta : http://download.iobroker.net/sources-dist-latest.json Active repo(s): stable Installed ioBroker-Instances Used repository: stable Adapter "admin" : 6.3.5 , installed 6.3.5 Adapter "backitup" : 2.6.23 , installed 2.6.23 Adapter "geofency" : 1.2.4 , installed 1.2.4 Adapter "info" : 1.9.26 , installed 1.9.26 Adapter "iot" : 1.14.5 , installed 1.14.5 Adapter "javascript" : 7.0.3 , installed 7.0.3 Controller "js-controller": 4.0.24 , installed 4.0.24 Adapter "openknx" : 0.5.3 , installed 0.5.3 Adapter "simple-api" : 2.7.2 , installed 2.7.2 Adapter "socketio" : 4.2.0 , installed 4.2.0 Adapter "solax" : 0.7.5 , installed 0.7.5 Adapter "web" : 4.3.0 , installed 4.3.0 Adapter "ws" : 1.3.0 , installed 1.3.0 Adapter "yahka" : 0.17.0 , installed 0.17.0 Objects and States Please stand by - This may take a while Objects: 905 States: 702 *** OS-Repositories and Updates *** Hit:1 http://deb.debian.org/debian bullseye InRelease Hit:2 http://security.debian.org/debian-security bullseye-security InRelease Hit:3 http://deb.debian.org/debian bullseye-updates InRelease Hit:4 http://archive.raspberrypi.org/debian bullseye InRelease Hit:5 https://deb.nodesource.com/node_18.x bullseye InRelease Reading package lists... Pending Updates: 0 *** Listening Ports *** Active Internet connections (only servers) Proto Recv-Q Send-Q Local Address Foreign Address State User Inode PID/Program name tcp 0 0 127.0.0.1:9000 0.0.0.0:* LISTEN 1001 12989 504/iobroker.js-con tcp 0 0 127.0.0.1:9001 0.0.0.0:* LISTEN 1001 12959 504/iobroker.js-con tcp 0 0 0.0.0.0:22 0.0.0.0:* LISTEN 0 14039 539/sshd: /usr/sbin tcp6 0 0 :::22 :::* LISTEN 0 14444 539/sshd: /usr/sbin udp 0 0 0.0.0.0:68 0.0.0.0:* 0 12955 678/dhcpcd udp 0 0 0.0.0.0:37781 0.0.0.0:* 108 13939 372/avahi-daemon: r udp 0 0 0.0.0.0:5353 0.0.0.0:* 108 13937 372/avahi-daemon: r udp6 0 0 :::55672 :::* 108 13940 372/avahi-daemon: r udp6 0 0 :::5353 :::* 108 13938 372/avahi-daemon: r *** Log File - Last 25 Lines *** 2023-08-09 09:07:38.505 - info: host.raspberrypi4 stopInstance system.adapter.web.0 send kill signal 2023-08-09 09:07:38.473 - info: web.0 (1341) Got terminate signal TERMINATE_YOURSELF 2023-08-09 09:07:38.588 - info: web.0 (1341) terminated http server on port 8082 2023-08-09 09:07:38.589 - info: web.0 (1341) terminating 2023-08-09 09:07:38.591 - info: web.0 (1341) Terminated (ADAPTER_REQUESTED_TERMINATION): Without reason 2023-08-09 09:07:38.768 - info: host.raspberrypi4 "system.adapter.yahka.0" disabled 2023-08-09 09:07:38.769 - info: host.raspberrypi4 stopInstance system.adapter.yahka.0 (force=false, process=true) 2023-08-09 09:07:38.768 - info: yahka.0 (1358) Adapter is disabled => stop 2023-08-09 09:07:38.779 - info: yahka.0 (1358) cleaning up ... 2023-08-09 09:07:38.780 - info: yahka.0 (1358) cleaned up ... 2023-08-09 09:07:38.786 - info: yahka.0 (1358) Got terminate signal TERMINATE_YOURSELF 2023-08-09 09:07:38.816 - info: host.raspberrypi4 stopInstance system.adapter.yahka.0 send kill signal 2023-08-09 09:07:38.832 - info: yahka.0 (1358) terminating 2023-08-09 09:07:38.833 - info: yahka.0 (1358) Terminated (NO_ERROR): Without reason 2023-08-09 09:07:39.140 - info: host.raspberrypi4 instance system.adapter.web.0 terminated with code 11 (ADAPTER_REQUESTED_TERMINATION) 2023-08-09 09:07:39.381 - info: host.raspberrypi4 instance system.adapter.yahka.0 terminated with code 0 (NO_ERROR) 2023-08-09 09:07:42.922 - info: admin.0 (574) Adapter is disabled => stop 2023-08-09 09:07:42.923 - info: host.raspberrypi4 "system.adapter.admin.0" disabled 2023-08-09 09:07:42.923 - info: host.raspberrypi4 stopInstance system.adapter.admin.0 (force=false, process=true) 2023-08-09 09:07:42.924 - info: admin.0 (574) terminating http server on port 8081 2023-08-09 09:07:42.935 - info: admin.0 (574) Got terminate signal TERMINATE_YOURSELF 2023-08-09 09:07:42.942 - info: admin.0 (574) terminating 2023-08-09 09:07:42.943 - info: admin.0 (574) Terminated (NO_ERROR): Without reason 2023-08-09 09:07:42.968 - info: host.raspberrypi4 stopInstance system.adapter.admin.0 send kill signal 2023-08-09 09:07:43.503 - info: host.raspberrypi4 instance system.adapter.admin.0 terminated with code 0 (NO_ERROR) -
@rsw2004 sagte in ioBroker funktioniert nicht mehr:
18:17:48 up 19:23, 0 users, load average: 0.00, 0.00, 0.00
Wie 0 users?
Irgendwas stimmt da ganz und gar nicht mit dem System, würde ich sagen.
dmesg -Tsagt? Achtung, kann viel sein...
-
@rsw2004 sagte in ioBroker funktioniert nicht mehr:
load average: 0.00, 0.00, 0.00
kann eigentlich auch so nicht stimmen
-
[ 0.000000] Booting Linux on physical CPU 0x0000000000 [0x410fd083] [ 0.000000] Linux version 6.1.21-v8+ (dom@buildbot) (aarch64-linux-gnu-gcc-8 (Ubuntu/Linaro 8.4.0-3ubuntu1) 8.4.0, GNU ld (GNU Binutils for Ubuntu) 2.34) #1642 SMP PREEMPT Mon Apr 3 17:24:16 BST 2023 [ 0.000000] random: crng init done [ 0.000000] Detected PIPT I-cache on CPU0 [ 0.000000] CPU features: detected: Spectre-v2 [ 0.000000] CPU features: detected: Spectre-v3a [ 0.000000] CPU features: detected: Spectre-v4 [ 0.000000] CPU features: detected: Spectre-BHB [ 0.000000] CPU features: kernel page table isolation forced ON by KASLR [ 0.000000] CPU features: detected: Kernel page table isolation (KPTI) [ 0.000000] CPU features: detected: ARM erratum 1742098 [ 0.000000] CPU features: detected: ARM errata 1165522, 1319367, or 1530923 [ 0.000000] alternatives: applying boot alternatives [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 996912 [ 0.000000] Kernel command line: coherent_pool=1M 8250.nr_uarts=0 snd_bcm2835.enable_headphones=0 snd_bcm2835.enable_headphones=1 snd_bcm2835.enable_hdmi=1 snd_bcm2835.enable_hdmi=0 smsc95xx.macaddr=E4:5F:01:26:8F:AE vc_mem.mem_base=0x3ec00000 vc_mem.mem_size=0x40000000 console=ttyS0,115200 console=tty1 root=PARTUUID=105e3ec4-02 rootfstype=ext4 fsck.repair=yes rootwait [ 0.000000] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes, linear) [ 0.000000] Machine model: Raspberry Pi 4 Model B Rev 1.4 [ 0.000000] efi: UEFI not found. [ 0.000000] Reserved memory: created CMA memory pool at 0x000000000ec00000, size 512 MiB [ 0.000000] OF: reserved mem: initialized node linux,cma, compatible id shared-dma-pool [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x0000000000000000-0x000000003fffffff] [ 0.000000] DMA32 [mem 0x0000000040000000-0x00000000fbffffff] [ 0.000000] Normal empty [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000000000000-0x000000003b3fffff] [ 0.000000] node 0: [mem 0x0000000040000000-0x00000000fbffffff] [ 0.000000] Initmem setup node 0 [mem 0x0000000000000000-0x00000000fbffffff] [ 0.000000] On node 0, zone DMA32: 19456 pages in unavailable ranges [ 0.000000] On node 0, zone DMA32: 16384 pages in unavailable ranges [ 0.000000] percpu: Embedded 29 pages/cpu s78504 r8192 d32088 u118784 [ 0.000000] pcpu-alloc: s78504 r8192 d32088 u118784 alloc=29*4096 [ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 [ 0.000000] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes, linear) [ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off [ 0.000000] software IO TLB: area num 4. [ 0.000000] software IO TLB: mapped [mem 0x0000000037400000-0x000000003b400000] (64MB) [ 0.000000] Memory: 3356948K/4050944K available (11776K kernel code, 2106K rwdata, 3688K rodata, 4160K init, 1077K bss, 169708K reserved, 524288K cma-reserved) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [ 0.000000] ftrace: allocating 39744 entries in 156 pages [ 0.000000] ftrace: allocated 156 pages with 4 groups [ 0.000000] trace event string verifier disabled[ 0.000000] rcu: Preemptible hierarchical RCU implementation. [ 0.000000] rcu: RCU event tracing is enabled. [ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=4. [ 0.000000] Trampoline variant of Tasks RCU enabled. [ 0.000000] Rude variant of Tasks RCU enabled. [ 0.000000] Tracing variant of Tasks RCU enabled. [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies. [ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4 [ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0 [ 0.000000] Root IRQ handler: gic_handle_irq [ 0.000000] GIC: Using split EOI/Deactivate mode[ 0.000000] rcu: srcu_init: Setting srcu_struct sizes based on contention. [ 0.000000] arch_timer: cp15 timer(s) running at 54.00MHz (phys). [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0xc743ce346, max_idle_ns: 440795203123 ns [ 0.000001] sched_clock: 56 bits at 54MHz, resolution 18ns, wraps every 4398046511102ns [ 0.000320] Console: colour dummy device 80x25 [ 0.000923] printk: console [tty1] enabled [ 0.000993] Calibrating delay loop (skipped), value calculated using timer frequency.. 108.00 BogoMIPS (lpj=216000) [ 0.001034] pid_max: default: 32768 minimum: 301[ 0.001177] LSM: Security Framework initializing[ 0.001412] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes, linear) [ 0.001500] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes, linear) [ 0.002842] cgroup: Disabling memory control group subsystem [ 0.005174] cblist_init_generic: Setting adjustable number of callback queues. [ 0.005209] cblist_init_generic: Setting shift to 2 and lim to 1. [ 0.005410] cblist_init_generic: Setting shift to 2 and lim to 1. [ 0.005605] cblist_init_generic: Setting shift to 2 and lim to 1. [ 0.006081] rcu: Hierarchical SRCU implementation. [ 0.006106] rcu: Max phase no-delay instances is 1000. [ 0.007475] EFI services will not be available. [ 0.008119] smp: Bringing up secondary CPUs ... [ 0.009238] Detected PIPT I-cache on CPU1 [ 0.009396] CPU1: Booted secondary processor 0x0000000001 [0x410fd083] [ 0.010584] Detected PIPT I-cache on CPU2 [ 0.010705] CPU2: Booted secondary processor 0x0000000002 [0x410fd083] [ 0.011862] Detected PIPT I-cache on CPU3 [ 0.011990] CPU3: Booted secondary processor 0x0000000003 [0x410fd083] [ 0.012140] smp: Brought up 1 node, 4 CPUs [ 0.012231] SMP: Total of 4 processors activated. [ 0.012253] CPU features: detected: 32-bit EL0 Support [ 0.012272] CPU features: detected: 32-bit EL1 Support [ 0.012294] CPU features: detected: CRC32 instructions [ 0.012441] CPU: All CPU(s) started at EL2 [ 0.012477] alternatives: applying system-wide alternatives [ 0.014365] devtmpfs: initialized [ 0.026516] Enabled cp15_barrier support [ 0.026583] Enabled setend support [ 0.026817] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns [ 0.026870] futex hash table entries: 1024 (order: 4, 65536 bytes, linear) [ 0.040956] pinctrl core: initialized pinctrl subsystem [ 0.041868] DMI not present or invalid. [ 0.042584] NET: Registered PF_NETLINK/PF_ROUTE protocol family [ 0.046262] DMA: preallocated 1024 KiB GFP_KERNEL pool for atomic allocations [ 0.046585] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations [ 0.047571] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations [ 0.047683] audit: initializing netlink subsys (disabled) [ 0.047983] audit: type=2000 audit(0.044:1): state=initialized audit_enabled=0 res=1 [ 0.048646] thermal_sys: Registered thermal governor 'step_wise' [ 0.048741] cpuidle: using governor menu [ 0.049164] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers. [ 0.049383] ASID allocator initialised with 32768 entries [ 0.049565] Serial: AMBA PL011 UART driver [ 0.063137] bcm2835-mbox fe00b880.mailbox: mailbox enabled [ 0.084311] raspberrypi-firmware soc:firmware: Attached to firmware from 2023-03-17T10:50:39, variant start [ 0.088327] raspberrypi-firmware soc:firmware: Firmware hash is 82f3750a65fadae9a38077e3c2e217ad158c8d54 [ 0.104676] KASLR enabled [ 0.140261] bcm2835-dma fe007000.dma: DMA legacy API manager, dmachans=0x1 [ 0.146221] SCSI subsystem initialized [ 0.146507] usbcore: registered new interface driver usbfs [ 0.146580] usbcore: registered new interface driver hub [ 0.146662] usbcore: registered new device driver usb [ 0.147073] usb_phy_generic phy: supply vcc not found, using dummy regulator [ 0.147309] usb_phy_generic phy: dummy supplies not allowed for exclusive requests [ 0.147691] pps_core: LinuxPPS API ver. 1 registered [ 0.147716] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it> [ 0.147757] PTP clock support registered [ 0.148896] vgaarb: loaded [ 0.149710] clocksource: Switched to clocksource arch_sys_counter [ 0.150281] VFS: Disk quotas dquot_6.6.0 [ 0.150377] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.150578] FS-Cache: Loaded [ 0.150752] CacheFiles: Loaded [ 0.160200] NET: Registered PF_INET protocol family [ 0.160964] IP idents hash table entries: 65536 (order: 7, 524288 bytes, linear) [ 0.165755] tcp_listen_portaddr_hash hash table entries: 2048 (order: 3, 32768 bytes, linear) [ 0.165933] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear) [ 0.165980] TCP established hash table entries: 32768 (order: 6, 262144 bytes, linear) [ 0.166244] TCP bind hash table entries: 32768 (order: 8, 1048576 bytes, linear) [ 0.167292] TCP: Hash tables configured (established 32768 bind 32768) [ 0.167581] UDP hash table entries: 2048 (order: 4, 65536 bytes, linear) [ 0.167697] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes, linear) [ 0.168044] NET: Registered PF_UNIX/PF_LOCAL protocol family [ 0.168924] RPC: Registered named UNIX socket transport module. [ 0.168960] RPC: Registered udp transport module. [ 0.168980] RPC: Registered tcp transport module. [ 0.168999] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.169035] PCI: CLS 0 bytes, default 64 [ 0.171722] hw perfevents: enabled with armv8_cortex_a72 PMU driver, 7 counters available [ 0.172153] kvm [1]: IPA Size Limit: 44 bits [ 0.173502] kvm [1]: vgic interrupt IRQ9 [ 0.173797] kvm [1]: Hyp mode initialized successfully [ 1.334410] Initialise system trusted keyrings [ 1.334915] workingset: timestamp_bits=46 max_order=20 bucket_order=0 [ 1.342628] zbud: loaded [ 1.345546] NFS: Registering the id_resolver key type [ 1.345613] Key type id_resolver registered [ 1.345634] Key type id_legacy registered [ 1.345814] nfs4filelayout_init: NFSv4 File Layout Driver Registering... [ 1.345845] nfs4flexfilelayout_init: NFSv4 Flexfile Layout Driver Registering... [ 1.347312] Key type asymmetric registered [ 1.347345] Asymmetric key parser 'x509' registered [ 1.347439] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 247) [ 1.347734] io scheduler mq-deadline registered [ 1.347762] io scheduler kyber registered [ 1.349781] irq_brcmstb_l2: registered L2 intc (/soc/interrupt-controller@7ef00100, parent irq: 27)[ 1.358754] brcm-pcie fd500000.pcie: host bridge /scb/pcie@7d500000 ranges: [ 1.358821] brcm-pcie fd500000.pcie: No bus range found for /scb/pcie@7d500000, using [bus 00-ff][ 1.358930] brcm-pcie fd500000.pcie: MEM 0x0600000000..0x063fffffff -> 0x00c0000000 [ 1.359032] brcm-pcie fd500000.pcie: IB MEM 0x0000000000..0x00ffffffff -> 0x0400000000 [ 1.360100] brcm-pcie fd500000.pcie: PCI host bridge to bus 0000:00 [ 1.360134] pci_bus 0000:00: root bus resource [bus 00-ff] [ 1.360163] pci_bus 0000:00: root bus resource [mem 0x600000000-0x63fffffff] (bus address [0xc0000000-0xffffffff]) [ 1.360254] pci 0000:00:00.0: [14e4:2711] type 01 class 0x060400 [ 1.360534] pci 0000:00:00.0: PME# supported from D0 D3hot [ 1.364740] pci_bus 0000:01: supply vpcie3v3 not found, using dummy regulator [ 1.364941] pci_bus 0000:01: supply vpcie3v3aux not found, using dummy regulator [ 1.365083] pci_bus 0000:01: supply vpcie12v not found, using dummy regulator [ 1.431804] brcm-pcie fd500000.pcie: link up, 5.0 GT/s PCIe x1 (SSC) [ 1.431989] pci 0000:01:00.0: [1106:3483] type 00 class 0x0c0330 [ 1.432131] pci 0000:01:00.0: reg 0x10: [mem 0x00000000-0x00000fff 64bit] [ 1.432629] pci 0000:01:00.0: PME# supported from D0 D3hot [ 1.433436] pci 0000:00:00.0: BAR 8: assigned [mem 0x600000000-0x6000fffff] [ 1.433477] pci 0000:01:00.0: BAR 0: assigned [mem 0x600000000-0x600000fff 64bit] [ 1.433535] pci 0000:00:00.0: PCI bridge to [bus 01] [ 1.433567] pci 0000:00:00.0: bridge window [mem 0x600000000-0x6000fffff] [ 1.447270] iproc-rng200 fe104000.rng: hwrng registered [ 1.447901] vc-mem: phys_addr:0x00000000 mem_base=0x3ec00000 mem_size:0x40000000(1024 MiB) [ 1.449533] gpiomem-bcm2835 fe200000.gpiomem: Initialised: Registers at 0xfe200000 [ 1.463027] brd: module loaded [ 1.472079] loop: module loaded [ 1.472972] Loading iSCSI transport class v2.0-870. [ 1.478582] bcmgenet fd580000.ethernet: GENET 5.0 EPHY: 0x0000 [ 1.537878] unimac-mdio unimac-mdio.-19: Broadcom UniMAC MDIO bus [ 1.539089] usbcore: registered new interface driver r8152 [ 1.539178] usbcore: registered new interface driver lan78xx [ 1.539273] usbcore: registered new interface driver smsc95xx [ 1.586796] pci 0000:00:00.0: enabling device (0000 -> 0002) [ 1.586993] xhci_hcd 0000:01:00.0: xHCI Host Controller [ 1.587037] xhci_hcd 0000:01:00.0: new USB bus registered, assigned bus number 1 [ 1.587824] xhci_hcd 0000:01:00.0: hcc params 0x002841eb hci version 0x100 quirks 0x0001e40000000890 [ 1.588893] xhci_hcd 0000:01:00.0: xHCI Host Controller [ 1.588928] xhci_hcd 0000:01:00.0: new USB bus registered, assigned bus number 2 [ 1.588965] xhci_hcd 0000:01:00.0: Host supports USB 3.0 SuperSpeed [ 1.589391] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.01 [ 1.589428] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.589456] usb usb1: Product: xHCI Host Controller [ 1.589478] usb usb1: Manufacturer: Linux 6.1.21-v8+ xhci-hcd [ 1.589500] usb usb1: SerialNumber: 0000:01:00.0[ 1.590334] hub 1-0:1.0: USB hub found [ 1.590421] hub 1-0:1.0: 1 port detected [ 1.591402] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 6.01 [ 1.591439] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.591466] usb usb2: Product: xHCI Host Controller [ 1.591489] usb usb2: Manufacturer: Linux 6.1.21-v8+ xhci-hcd [ 1.591511] usb usb2: SerialNumber: 0000:01:00.0[ 1.592216] hub 2-0:1.0: USB hub found [ 1.592340] hub 2-0:1.0: 4 ports detected [ 1.594223] dwc_otg: version 3.00a 10-AUG-2012 (platform bus) [ 1.594604] dwc_otg: FIQ enabled [ 1.594616] dwc_otg: NAK holdoff enabled [ 1.594627] dwc_otg: FIQ split-transaction FSM enabled [ 1.594644] Module dwc_common_port init [ 1.595244] usbcore: registered new interface driver uas [ 1.595367] usbcore: registered new interface driver usb-storage [ 1.595625] mousedev: PS/2 mouse device common for all mice [ 1.602490] sdhci: Secure Digital Host Controller Interface driver [ 1.602530] sdhci: Copyright(c) Pierre Ossman [ 1.603257] sdhci-pltfm: SDHCI platform and OF driver helper [ 1.607001] ledtrig-cpu: registered to indicate activity on CPUs [ 1.607381] hid: raw HID events driver (C) Jiri Kosina [ 1.607617] usbcore: registered new interface driver usbhid [ 1.607644] usbhid: USB HID core driver [ 1.616816] NET: Registered PF_PACKET protocol family [ 1.616991] Key type dns_resolver registered [ 1.618462] registered taskstats version 1 [ 1.618561] Loading compiled-in X.509 certificates [ 1.619507] Key type .fscrypt registered [ 1.619535] Key type fscrypt-provisioning registered [ 1.635627] uart-pl011 fe201000.serial: there is not valid maps for state default [ 1.636409] uart-pl011 fe201000.serial: cts_event_workaround enabled [ 1.636599] fe201000.serial: ttyAMA0 at MMIO 0xfe201000 (irq = 36, base_baud = 0) is a PL011 rev2 [ 1.646078] bcm2835-wdt bcm2835-wdt: Broadcom BCM2835 watchdog timer [ 1.646583] bcm2835-power bcm2835-power: Broadcom BCM2835 power domains driver [ 1.647952] mmc-bcm2835 fe300000.mmcnr: mmc_debug:0 mmc_debug2:0 [ 1.647985] mmc-bcm2835 fe300000.mmcnr: DMA channel allocated [ 1.679960] of_cfs_init [ 1.680106] of_cfs_init: OK [ 1.712931] mmc0: SDHCI controller on fe340000.mmc [fe340000.mmc] using ADMA [ 1.713531] Waiting for root device PARTUUID=105e3ec4-02... [ 1.767144] mmc1: new high speed SDIO card at address 0001 [ 1.815348] mmc0: new ultra high speed DDR50 SDHC card at address aaaa [ 1.816450] mmcblk0: mmc0:aaaa SL16G 14.8 GiB [ 1.821077] mmcblk0: p1 p2 [ 1.821735] mmcblk0: mmc0:aaaa SL16G 14.8 GiB (quirks 0x00004000) [ 1.845752] usb 1-1: new high-speed USB device number 2 using xhci_hcd [ 1.850330] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Quota mode: none. [ 1.850439] VFS: Mounted root (ext4 filesystem) readonly on device 179:2. [ 1.855942] devtmpfs: mounted [ 1.864826] Freeing unused kernel memory: 4160K [ 1.865049] Run /sbin/init as init process [ 1.865071] with arguments: [ 1.865081] /sbin/init [ 1.865091] with environment: [ 1.865100] HOME=/ [ 1.865110] TERM=linux [ 1.996424] usb 1-1: New USB device found, idVendor=2109, idProduct=3431, bcdDevice= 4.21 [ 1.996485] usb 1-1: New USB device strings: Mfr=0, Product=1, SerialNumber=0 [ 1.996514] usb 1-1: Product: USB2.0 Hub [ 1.998823] hub 1-1:1.0: USB hub found [ 1.999163] hub 1-1:1.0: 4 ports detected [ 2.248990] systemd[1]: System time before build time, advancing clock. [ 2.429091] NET: Registered PF_INET6 protocol family [ 2.431100] Segment Routing with IPv6 [ 2.431161] In-situ OAM (IOAM) with IPv6 [ 2.508178] systemd[1]: systemd 247.3-7+deb11u4 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +ZSTD +SECCOMP +BLKID +ELFUTILS +KMOD +IDN2 -IDN +PCRE2 default-hierarchy=unified) [ 2.509274] systemd[1]: Detected architecture arm64. [ 2.520793] systemd[1]: Set hostname to <raspberrypi4>. [ 3.289012] systemd[1]: Queued start job for default target Multi-User System. [ 3.311430] systemd[1]: Created slice system-getty.slice. [ 3.313274] systemd[1]: Created slice system-modprobe.slice. [ 3.314709] systemd[1]: Created slice system-systemd\x2dfsck.slice. [ 3.315891] systemd[1]: Created slice User and Session Slice. [ 3.316725] systemd[1]: Started Dispatch Password Requests to Console Directory Watch. [ 3.317483] systemd[1]: Started Forward Password Requests to Wall Directory Watch. [ 3.318996] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point. [ 3.319540] systemd[1]: Reached target Local Encrypted Volumes. [ 3.320038] systemd[1]: Reached target Paths. [ 3.320465] systemd[1]: Reached target Slices. [ 3.320866] systemd[1]: Reached target Swap. [ 3.326933] systemd[1]: Listening on Syslog Socket. [ 3.328075] systemd[1]: Listening on fsck to fsckd communication Socket. [ 3.328784] systemd[1]: Listening on initctl Compatibility Named Pipe. [ 3.330439] systemd[1]: Listening on Journal Audit Socket. [ 3.331557] systemd[1]: Listening on Journal Socket (/dev/log). [ 3.332842] systemd[1]: Listening on Journal Socket. [ 3.335075] systemd[1]: Listening on udev Control Socket. [ 3.336215] systemd[1]: Listening on udev Kernel Socket. [ 3.337489] systemd[1]: Condition check resulted in Huge Pages File System being skipped. [ 3.358240] systemd[1]: Mounting POSIX Message Queue File System... [ 3.363375] systemd[1]: Mounting RPC Pipe File System... [ 3.369344] systemd[1]: Mounting Kernel Debug File System... [ 3.375373] systemd[1]: Mounting Kernel Trace File System... [ 3.376420] systemd[1]: Condition check resulted in Kernel Module supporting RPCSEC_GSS being skipped. [ 3.383453] systemd[1]: Starting Restore / save the current clock... [ 3.390057] systemd[1]: Starting Set the console keyboard layout... [ 3.396146] systemd[1]: Starting Create list of static device nodes for the current kernel... [ 3.402500] systemd[1]: Starting Load Kernel Module configfs... [ 3.409132] systemd[1]: Starting Load Kernel Module drm... [ 3.415968] systemd[1]: Starting Load Kernel Module fuse... [ 3.419780] systemd[1]: Condition check resulted in Set Up Additional Binary Formats being skipped.[ 3.428792] systemd[1]: Starting File System Check on Root Device... [ 3.439346] systemd[1]: Starting Journal Service... [ 3.467401] systemd[1]: Starting Load Kernel Modules... [ 3.473558] systemd[1]: Starting Coldplug All udev Devices... [ 3.483740] fuse: init (API version 7.37) [ 3.494242] systemd[1]: Mounted POSIX Message Queue File System. [ 3.495657] systemd[1]: Mounted RPC Pipe File System. [ 3.499033] systemd[1]: Mounted Kernel Debug File System. [ 3.500545] systemd[1]: Mounted Kernel Trace File System. [ 3.503366] systemd[1]: Finished Restore / save the current clock. [ 3.510380] systemd[1]: Finished Create list of static device nodes for the current kernel. [ 3.513188] systemd[1]: modprobe@configfs.service: Succeeded. [ 3.516525] systemd[1]: Finished Load Kernel Module configfs. [ 3.519251] systemd[1]: modprobe@fuse.service: Succeeded. [ 3.520982] systemd[1]: Finished Load Kernel Module fuse. [ 3.555682] systemd[1]: Mounting FUSE Control File System... [ 3.569009] systemd[1]: Mounting Kernel Configuration File System... [ 3.576662] systemd[1]: Started File System Check Daemon to report status. [ 3.594430] systemd[1]: Finished Load Kernel Modules. [ 3.595784] systemd[1]: Mounted FUSE Control File System. [ 3.596760] systemd[1]: Mounted Kernel Configuration File System. [ 3.603099] systemd[1]: Starting Apply Kernel Variables... [ 3.625556] systemd[1]: modprobe@drm.service: Succeeded. [ 3.627838] systemd[1]: Finished Load Kernel Module drm. [ 3.663414] systemd[1]: Finished File System Check on Root Device. [ 3.666385] systemd[1]: Finished Apply Kernel Variables. [ 3.694871] systemd[1]: Starting Remount Root and Kernel File Systems... [ 3.844759] systemd[1]: Started Journal Service.[ 3.847279] EXT4-fs (mmcblk0p2): re-mounted. Quota mode: none. [ 3.962764] systemd-journald[142]: Received client request to flush runtime journal. [ 3.975388] systemd-journald[142]: File /var/log/journal/d3a8466ddfb64ce6bef13e128446c843/system.journal corrupted or uncleanly shut down, renaming and replacing. [ 4.905676] mc: Linux media interface: v0.10 [ 4.914953] vc_sm_cma: module is from the staging directory, the quality is unknown, you have been warned. [ 4.917029] bcm2835_vc_sm_cma_probe: Videocore shared memory driver [ 4.917069] [vc_sm_connected_init]: start [ 4.926201] [vc_sm_connected_init]: installed successfully [ 5.018774] brcmstb-i2c fef04500.i2c: @97500hz registered in polling mode [ 5.046480] brcmstb-i2c fef09500.i2c: @97500hz registered in polling mode [ 5.169627] videodev: Linux video capture interface: v2.00 [ 5.173973] snd_bcm2835: module is from the staging directory, the quality is unknown, you have been warned. [ 5.254392] bcm2835_audio bcm2835_audio: card created with 8 channels [ 5.448834] bcm2835_mmal_vchiq: module is from the staging directory, the quality is unknown, you have been warned. [ 5.493359] bcm2835_mmal_vchiq: module is from the staging directory, the quality is unknown, you have been warned. [ 5.507510] bcm2835_mmal_vchiq: module is from the staging directory, the quality is unknown, you have been warned. [ 5.523435] rpivid_hevc: module is from the staging directory, the quality is unknown, you have been warned. [ 5.588822] bcm2835_codec: module is from the staging directory, the quality is unknown, you have been warned. [ 5.593790] bcm2835_v4l2: module is from the staging directory, the quality is unknown, you have been warned. [ 5.627287] bcm2835_isp: module is from the staging directory, the quality is unknown, you have been warned. [ 5.648568] bcm2835-codec bcm2835-codec: Device registered as /dev/video10 [ 5.648649] bcm2835-codec bcm2835-codec: Loaded V4L2 decode [ 5.655271] bcm2835-codec bcm2835-codec: Device registered as /dev/video11 [ 5.655333] bcm2835-codec bcm2835-codec: Loaded V4L2 encode [ 5.675489] bcm2835-codec bcm2835-codec: Device registered as /dev/video12 [ 5.675550] bcm2835-codec bcm2835-codec: Loaded V4L2 isp [ 5.676946] rpivid feb10000.codec: Device registered as /dev/video19 [ 5.707838] [drm] Initialized v3d 1.0.0 20180419 for fec00000.v3d on minor 0 [ 5.715130] bcm2835-codec bcm2835-codec: Device registered as /dev/video18 [ 5.715224] bcm2835-codec bcm2835-codec: Loaded V4L2 image_fx [ 5.722136] bcm2835-codec bcm2835-codec: Device registered as /dev/video31 [ 5.722197] bcm2835-codec bcm2835-codec: Loaded V4L2 encode_image [ 5.726668] bcm2835-isp bcm2835-isp: Device node output[0] registered as /dev/video13 [ 5.733318] bcm2835-isp bcm2835-isp: Device node capture[0] registered as /dev/video14 [ 5.739418] bcm2835-isp bcm2835-isp: Device node capture[1] registered as /dev/video15 [ 5.740081] bcm2835-isp bcm2835-isp: Device node stats[2] registered as /dev/video16 [ 5.740123] bcm2835-isp bcm2835-isp: Register output node 0 with media controller [ 5.740145] bcm2835-isp bcm2835-isp: Register capture node 1 with media controller [ 5.740171] bcm2835-isp bcm2835-isp: Register capture node 2 with media controller [ 5.740200] bcm2835-isp bcm2835-isp: Register capture node 3 with media controller [ 5.811652] bcm2835-isp bcm2835-isp: Device node output[0] registered as /dev/video20 [ 5.911546] bcm2835-isp bcm2835-isp: Device node capture[0] registered as /dev/video21 [ 5.922153] bcm2835-isp bcm2835-isp: Device node capture[1] registered as /dev/video22 [ 5.978814] bcm2835-isp bcm2835-isp: Device node stats[2] registered as /dev/video23 [ 5.978863] bcm2835-isp bcm2835-isp: Register output node 0 with media controller [ 5.978887] bcm2835-isp bcm2835-isp: Register capture node 1 with media controller [ 5.978922] bcm2835-isp bcm2835-isp: Register capture node 2 with media controller [ 5.978946] bcm2835-isp bcm2835-isp: Register capture node 3 with media controller [ 5.979378] bcm2835-isp bcm2835-isp: Loaded V4L2 bcm2835-isp [ 6.001857] cfg80211: Loading compiled-in X.509 certificates for regulatory database [ 6.060334] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7' [ 6.083789] cfg80211: loaded regulatory.db is malformed or signature is missing/invalid [ 6.401215] brcmfmac: F1 signature read @0x18000000=0x15264345 [ 6.416568] brcmfmac: brcmf_fw_alloc_request: using brcm/brcmfmac43455-sdio for chip BCM4345/6 [ 6.417891] usbcore: registered new interface driver brcmfmac [ 6.687279] brcmfmac: brcmf_c_preinit_dcmds: Firmware: BCM4345/6 wl0: Nov 1 2021 00:37:25 version 7.45.241 (1a2f2fa CY) FWID 01-703fd60 [ 6.797633] vc4-drm gpu: bound fe400000.hvs (ops vc4_hvs_ops [vc4]) [ 6.817046] Registered IR keymap rc-cec [ 6.818226] rc rc0: vc4-hdmi-0 as /devices/platform/soc/fef00700.hdmi/rc/rc0 [ 6.819325] input: vc4-hdmi-0 as /devices/platform/soc/fef00700.hdmi/rc/rc0/input0 [ 6.853345] vc4-drm gpu: bound fef00700.hdmi (ops vc4_hdmi_ops [vc4]) [ 6.878085] Registered IR keymap rc-cec [ 6.878363] rc rc1: vc4-hdmi-1 as /devices/platform/soc/fef05700.hdmi/rc/rc1 [ 6.878602] input: vc4-hdmi-1 as /devices/platform/soc/fef05700.hdmi/rc/rc1/input1 [ 6.935958] vc4-drm gpu: bound fef05700.hdmi (ops vc4_hdmi_ops [vc4]) [ 6.946363] vc4-drm gpu: bound fe004000.txp (ops vc4_txp_ops [vc4]) [ 6.970239] vc4-drm gpu: bound fe206000.pixelvalve (ops vc4_crtc_ops [vc4]) [ 6.973814] vc4-drm gpu: bound fe207000.pixelvalve (ops vc4_crtc_ops [vc4]) [ 6.974407] vc4-drm gpu: bound fe20a000.pixelvalve (ops vc4_crtc_ops [vc4]) [ 6.974740] vc4-drm gpu: bound fe216000.pixelvalve (ops vc4_crtc_ops [vc4]) [ 6.975200] vc4-drm gpu: bound fec12000.pixelvalve (ops vc4_crtc_ops [vc4]) [ 7.078286] [drm] Initialized vc4 0.0.0 20140616 for gpu on minor 1 [ 7.084554] vc4-drm gpu: [drm] Cannot find any crtc or sizes [ 7.167676] uart-pl011 fe201000.serial: no DMA platform data [ 7.190981] 8021q: 802.1Q VLAN Support v1.8 [ 7.316217] Adding 102396k swap on /var/swap. Priority:-2 extents:1 across:102396k SSFS [ 8.039347] bcmgenet fd580000.ethernet: configuring instance for external RGMII (RX delay) [ 8.048847] bcmgenet fd580000.ethernet eth0: Link is Down [ 12.125872] bcmgenet fd580000.ethernet eth0: Link is Up - 1Gbps/Full - flow control rx/tx [ 12.125916] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready [ 13.888659] ICMPv6: process `dhcpcd' is using deprecated sysctl (syscall) net.ipv6.neigh.eth0.retrans_time - use net.ipv6.neigh.eth0.retrans_time_ms instead [ 15.390312] Bluetooth: Core ver 2.22 [ 15.390400] NET: Registered PF_BLUETOOTH protocol family [ 15.390405] Bluetooth: HCI device and connection manager initialized [ 15.390421] Bluetooth: HCI socket layer initialized [ 15.390429] Bluetooth: L2CAP socket layer initialized [ 15.390442] Bluetooth: SCO socket layer initialized [ 15.398400] Bluetooth: HCI UART driver ver 2.3 [ 15.398423] Bluetooth: HCI UART protocol H4 registered [ 15.398847] Bluetooth: HCI UART protocol Three-wire (H5) registered [ 15.400455] Bluetooth: HCI UART protocol Broadcom registered [ 15.760872] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 15.760892] Bluetooth: BNEP filters: protocol multicast [ 15.760908] Bluetooth: BNEP socket layer initialized [ 15.765360] Bluetooth: MGMT ver 1.22 [ 15.774030] NET: Registered PF_ALG protocol family robin@raspberrypi4:/ $ -
Keine Ahnung was da schief ist.
Aber hast du auchdmesg -Teingegeben? Eigentlich sollten dann auch Zeitstempel in der Ausgabe erscheinen.
-
Neuer Versuch
[Tue Aug 8 22:54:46 2023] Booting Linux on physical CPU 0x0000000000 [0x410fd083] [Tue Aug 8 22:54:46 2023] Linux version 6.1.21-v8+ (dom@buildbot) (aarch64-linux-gnu-gcc-8 (Ubuntu/Linaro 8.4.0-3ubuntu1) 8.4.0, GNU ld (GNU Binutils for Ubuntu) 2.34) #1642 SMP PREEMPT Mon Apr 3 17:24:16 BST 2023 [Tue Aug 8 22:54:46 2023] random: crng init done [Tue Aug 8 22:54:46 2023] Machine model: Raspberry Pi 4 Model B Rev 1.4 [Tue Aug 8 22:54:46 2023] efi: UEFI not found. [Tue Aug 8 22:54:46 2023] Reserved memory: created CMA memory pool at 0x000000000ec00000, size 512 MiB [Tue Aug 8 22:54:46 2023] OF: reserved mem: initialized node linux,cma, compatible id shared-dma-pool[Tue Aug 8 22:54:46 2023] Zone ranges: [Tue Aug 8 22:54:46 2023] DMA [mem 0x0000000000000000-0x000000003fffffff] [Tue Aug 8 22:54:46 2023] DMA32 [mem 0x0000000040000000-0x00000000fbffffff] [Tue Aug 8 22:54:46 2023] Normal empty [Tue Aug 8 22:54:46 2023] Movable zone start for each node [Tue Aug 8 22:54:46 2023] Early memory node ranges[Tue Aug 8 22:54:46 2023] node 0: [mem 0x0000000000000000-0x000000003b3fffff] [Tue Aug 8 22:54:46 2023] node 0: [mem 0x0000000040000000-0x00000000fbffffff] [Tue Aug 8 22:54:46 2023] Initmem setup node 0 [mem 0x0000000000000000-0x00000000fbffffff] [Tue Aug 8 22:54:46 2023] On node 0, zone DMA32: 19456 pages in unavailable ranges [Tue Aug 8 22:54:46 2023] On node 0, zone DMA32: 16384 pages in unavailable ranges [Tue Aug 8 22:54:46 2023] percpu: Embedded 29 pages/cpu s78504 r8192 d32088 u118784 [Tue Aug 8 22:54:46 2023] pcpu-alloc: s78504 r8192 d32088 u118784 alloc=29*4096 [Tue Aug 8 22:54:46 2023] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 [Tue Aug 8 22:54:46 2023] Detected PIPT I-cache on CPU0 [Tue Aug 8 22:54:46 2023] CPU features: detected: Spectre-v2 [Tue Aug 8 22:54:46 2023] CPU features: detected: Spectre-v3a [Tue Aug 8 22:54:46 2023] CPU features: detected: Spectre-v4 [Tue Aug 8 22:54:46 2023] CPU features: detected: Spectre-BHB [Tue Aug 8 22:54:46 2023] CPU features: kernel page table isolation forced ON by KASLR [Tue Aug 8 22:54:46 2023] CPU features: detected: Kernel page table isolation (KPTI) [Tue Aug 8 22:54:46 2023] CPU features: detected: ARM erratum 1742098 [Tue Aug 8 22:54:46 2023] CPU features: detected: ARM errata 1165522, 1319367, or 1530923 [Tue Aug 8 22:54:46 2023] alternatives: applying boot alternatives [Tue Aug 8 22:54:46 2023] Built 1 zonelists, mobility grouping on. Total pages: 996912 [Tue Aug 8 22:54:46 2023] Kernel command line: coherent_pool=1M 8250.nr_uarts=0 snd_bcm2835.enable_headphones=0 snd_bcm2835.enable_headphones=1 snd_bcm2835.enable_hdmi=1 snd_bcm2835.enable_hdmi=0 smsc95xx.macaddr=E4:5F:01:26:8F:AE vc_mem.mem_base=0x3ec00000 vc_mem.mem_size=0x40000000 console=ttyS0,115200 console=tty1 root=PARTUUID=105e3ec4-02 rootfstype=ext4 fsck.repair=yes rootwait [Tue Aug 8 22:54:46 2023] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes, linear) [Tue Aug 8 22:54:46 2023] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes, linear) [Tue Aug 8 22:54:46 2023] mem auto-init: stack:off, heap alloc:off, heap free:off [Tue Aug 8 22:54:46 2023] software IO TLB: area num 4. [Tue Aug 8 22:54:46 2023] software IO TLB: mapped [mem 0x0000000037400000-0x000000003b400000] (64MB) [Tue Aug 8 22:54:46 2023] Memory: 3356948K/4050944K available (11776K kernel code, 2106K rwdata, 3688K rodata, 4160K init, 1077K bss, 169708K reserved, 524288K cma-reserved) [Tue Aug 8 22:54:46 2023] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [Tue Aug 8 22:54:46 2023] ftrace: allocating 39744 entries in 156 pages [Tue Aug 8 22:54:46 2023] ftrace: allocated 156 pages with 4 groups [Tue Aug 8 22:54:46 2023] trace event string verifier disabled [Tue Aug 8 22:54:46 2023] rcu: Preemptible hierarchical RCU implementation. [Tue Aug 8 22:54:46 2023] rcu: RCU event tracing is enabled. [Tue Aug 8 22:54:46 2023] rcu: RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=4. [Tue Aug 8 22:54:46 2023] Trampoline variant of Tasks RCU enabled. [Tue Aug 8 22:54:46 2023] Rude variant of Tasks RCU enabled. [Tue Aug 8 22:54:46 2023] Tracing variant of Tasks RCU enabled. [Tue Aug 8 22:54:46 2023] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies. [Tue Aug 8 22:54:46 2023] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4 [Tue Aug 8 22:54:46 2023] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0 [Tue Aug 8 22:54:46 2023] Root IRQ handler: gic_handle_irq [Tue Aug 8 22:54:46 2023] GIC: Using split EOI/Deactivate mode [Tue Aug 8 22:54:46 2023] rcu: srcu_init: Setting srcu_struct sizes based on contention. [Tue Aug 8 22:54:46 2023] arch_timer: cp15 timer(s) running at 54.00MHz (phys). [Tue Aug 8 22:54:46 2023] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0xc743ce346, max_idle_ns: 440795203123 ns [Tue Aug 8 22:54:46 2023] sched_clock: 56 bits at 54MHz, resolution 18ns, wraps every 4398046511102ns[Tue Aug 8 22:54:46 2023] Console: colour dummy device 80x25 [Tue Aug 8 22:54:46 2023] printk: console [tty1] enabled [Tue Aug 8 22:54:46 2023] Calibrating delay loop (skipped), value calculated using timer frequency.. 108.00 BogoMIPS (lpj=216000) [Tue Aug 8 22:54:46 2023] pid_max: default: 32768 minimum: 301 [Tue Aug 8 22:54:46 2023] LSM: Security Framework initializing [Tue Aug 8 22:54:46 2023] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes, linear) [Tue Aug 8 22:54:46 2023] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes, linear) [Tue Aug 8 22:54:46 2023] cgroup: Disabling memory control group subsystem [Tue Aug 8 22:54:46 2023] cblist_init_generic: Setting adjustable number of callback queues. [Tue Aug 8 22:54:46 2023] cblist_init_generic: Setting shift to 2 and lim to 1. [Tue Aug 8 22:54:46 2023] cblist_init_generic: Setting shift to 2 and lim to 1. [Tue Aug 8 22:54:46 2023] cblist_init_generic: Setting shift to 2 and lim to 1. [Tue Aug 8 22:54:46 2023] rcu: Hierarchical SRCU implementation. [Tue Aug 8 22:54:46 2023] rcu: Max phase no-delay instances is 1000. [Tue Aug 8 22:54:46 2023] EFI services will not be available. [Tue Aug 8 22:54:46 2023] smp: Bringing up secondary CPUs ... [Tue Aug 8 22:54:46 2023] Detected PIPT I-cache on CPU1 [Tue Aug 8 22:54:46 2023] CPU1: Booted secondary processor 0x0000000001 [0x410fd083] [Tue Aug 8 22:54:46 2023] Detected PIPT I-cache on CPU2 [Tue Aug 8 22:54:46 2023] CPU2: Booted secondary processor 0x0000000002 [0x410fd083] [Tue Aug 8 22:54:46 2023] Detected PIPT I-cache on CPU3 [Tue Aug 8 22:54:46 2023] CPU3: Booted secondary processor 0x0000000003 [0x410fd083] [Tue Aug 8 22:54:46 2023] smp: Brought up 1 node, 4 CPUs [Tue Aug 8 22:54:46 2023] SMP: Total of 4 processors activated. [Tue Aug 8 22:54:46 2023] CPU features: detected: 32-bit EL0 Support [Tue Aug 8 22:54:46 2023] CPU features: detected: 32-bit EL1 Support [Tue Aug 8 22:54:46 2023] CPU features: detected: CRC32 instructions [Tue Aug 8 22:54:46 2023] CPU: All CPU(s) started at EL2 [Tue Aug 8 22:54:46 2023] alternatives: applying system-wide alternatives [Tue Aug 8 22:54:46 2023] devtmpfs: initialized [Tue Aug 8 22:54:46 2023] Enabled cp15_barrier support [Tue Aug 8 22:54:46 2023] Enabled setend support [Tue Aug 8 22:54:46 2023] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns [Tue Aug 8 22:54:46 2023] futex hash table entries: 1024 (order: 4, 65536 bytes, linear) [Tue Aug 8 22:54:46 2023] pinctrl core: initialized pinctrl subsystem [Tue Aug 8 22:54:46 2023] DMI not present or invalid. [Tue Aug 8 22:54:46 2023] NET: Registered PF_NETLINK/PF_ROUTE protocol family [Tue Aug 8 22:54:46 2023] DMA: preallocated 1024 KiB GFP_KERNEL pool for atomic allocations [Tue Aug 8 22:54:46 2023] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations [Tue Aug 8 22:54:46 2023] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations[Tue Aug 8 22:54:46 2023] audit: initializing netlink subsys (disabled) [Tue Aug 8 22:54:46 2023] audit: type=2000 audit(0.044:1): state=initialized audit_enabled=0 res=1 [Tue Aug 8 22:54:46 2023] thermal_sys: Registered thermal governor 'step_wise' [Tue Aug 8 22:54:46 2023] cpuidle: using governor menu [Tue Aug 8 22:54:46 2023] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers. [Tue Aug 8 22:54:46 2023] ASID allocator initialised with 32768 entries [Tue Aug 8 22:54:46 2023] Serial: AMBA PL011 UART driver [Tue Aug 8 22:54:46 2023] bcm2835-mbox fe00b880.mailbox: mailbox enabled [Tue Aug 8 22:54:46 2023] raspberrypi-firmware soc:firmware: Attached to firmware from 2023-03-17T10:50:39, variant start [Tue Aug 8 22:54:46 2023] raspberrypi-firmware soc:firmware: Firmware hash is 82f3750a65fadae9a38077e3c2e217ad158c8d54 [Tue Aug 8 22:54:46 2023] KASLR enabled [Tue Aug 8 22:54:46 2023] bcm2835-dma fe007000.dma: DMA legacy API manager, dmachans=0x1 [Tue Aug 8 22:54:46 2023] SCSI subsystem initialized [Tue Aug 8 22:54:46 2023] usbcore: registered new interface driver usbfs [Tue Aug 8 22:54:46 2023] usbcore: registered new interface driver hub [Tue Aug 8 22:54:46 2023] usbcore: registered new device driver usb [Tue Aug 8 22:54:46 2023] usb_phy_generic phy: supply vcc not found, using dummy regulator [Tue Aug 8 22:54:46 2023] usb_phy_generic phy: dummy supplies not allowed for exclusive requests [Tue Aug 8 22:54:46 2023] pps_core: LinuxPPS API ver. 1 registered [Tue Aug 8 22:54:46 2023] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it> [Tue Aug 8 22:54:46 2023] PTP clock support registered [Tue Aug 8 22:54:46 2023] vgaarb: loaded [Tue Aug 8 22:54:46 2023] clocksource: Switched to clocksource arch_sys_counter [Tue Aug 8 22:54:46 2023] VFS: Disk quotas dquot_6.6.0 [Tue Aug 8 22:54:46 2023] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [Tue Aug 8 22:54:46 2023] FS-Cache: Loaded [Tue Aug 8 22:54:46 2023] CacheFiles: Loaded [Tue Aug 8 22:54:46 2023] NET: Registered PF_INET protocol family [Tue Aug 8 22:54:46 2023] IP idents hash table entries: 65536 (order: 7, 524288 bytes, linear) [Tue Aug 8 22:54:46 2023] tcp_listen_portaddr_hash hash table entries: 2048 (order: 3, 32768 bytes, linear) [Tue Aug 8 22:54:46 2023] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear) [Tue Aug 8 22:54:46 2023] TCP established hash table entries: 32768 (order: 6, 262144 bytes, linear) [Tue Aug 8 22:54:46 2023] TCP bind hash table entries: 32768 (order: 8, 1048576 bytes, linear) [Tue Aug 8 22:54:46 2023] TCP: Hash tables configured (established 32768 bind 32768) [Tue Aug 8 22:54:46 2023] UDP hash table entries: 2048 (order: 4, 65536 bytes, linear) [Tue Aug 8 22:54:46 2023] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes, linear) [Tue Aug 8 22:54:46 2023] NET: Registered PF_UNIX/PF_LOCAL protocol family [Tue Aug 8 22:54:46 2023] RPC: Registered named UNIX socket transport module. [Tue Aug 8 22:54:46 2023] RPC: Registered udp transport module. [Tue Aug 8 22:54:46 2023] RPC: Registered tcp transport module. [Tue Aug 8 22:54:46 2023] RPC: Registered tcp NFSv4.1 backchannel transport module. [Tue Aug 8 22:54:46 2023] PCI: CLS 0 bytes, default 64 [Tue Aug 8 22:54:46 2023] hw perfevents: enabled with armv8_cortex_a72 PMU driver, 7 counters available [Tue Aug 8 22:54:46 2023] kvm [1]: IPA Size Limit: 44 bits [Tue Aug 8 22:54:46 2023] kvm [1]: vgic interrupt IRQ9 [Tue Aug 8 22:54:46 2023] kvm [1]: Hyp mode initialized successfully [Tue Aug 8 22:54:47 2023] Initialise system trusted keyrings [Tue Aug 8 22:54:47 2023] workingset: timestamp_bits=46 max_order=20 bucket_order=0 [Tue Aug 8 22:54:47 2023] zbud: loaded [Tue Aug 8 22:54:47 2023] NFS: Registering the id_resolver key type [Tue Aug 8 22:54:47 2023] Key type id_resolver registered [Tue Aug 8 22:54:47 2023] Key type id_legacy registered [Tue Aug 8 22:54:47 2023] nfs4filelayout_init: NFSv4 File Layout Driver Registering... [Tue Aug 8 22:54:47 2023] nfs4flexfilelayout_init: NFSv4 Flexfile Layout Driver Registering... [Tue Aug 8 22:54:47 2023] Key type asymmetric registered [Tue Aug 8 22:54:47 2023] Asymmetric key parser 'x509' registered [Tue Aug 8 22:54:47 2023] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 247) [Tue Aug 8 22:54:47 2023] io scheduler mq-deadline registered [Tue Aug 8 22:54:47 2023] io scheduler kyber registered [Tue Aug 8 22:54:47 2023] irq_brcmstb_l2: registered L2 intc (/soc/interrupt-controller@7ef00100, parent irq: 27) [Tue Aug 8 22:54:47 2023] brcm-pcie fd500000.pcie: host bridge /scb/pcie@7d500000 ranges: [Tue Aug 8 22:54:47 2023] brcm-pcie fd500000.pcie: No bus range found for /scb/pcie@7d500000, using [bus 00-ff] [Tue Aug 8 22:54:47 2023] brcm-pcie fd500000.pcie: MEM 0x0600000000..0x063fffffff -> 0x00c0000000 [Tue Aug 8 22:54:47 2023] brcm-pcie fd500000.pcie: IB MEM 0x0000000000..0x00ffffffff -> 0x0400000000 [Tue Aug 8 22:54:47 2023] brcm-pcie fd500000.pcie: PCI host bridge to bus 0000:00 [Tue Aug 8 22:54:47 2023] pci_bus 0000:00: root bus resource [bus 00-ff] [Tue Aug 8 22:54:47 2023] pci_bus 0000:00: root bus resource [mem 0x600000000-0x63fffffff] (bus address [0xc0000000-0xffffffff]) [Tue Aug 8 22:54:47 2023] pci 0000:00:00.0: [14e4:2711] type 01 class 0x060400 [Tue Aug 8 22:54:47 2023] pci 0000:00:00.0: PME# supported from D0 D3hot [Tue Aug 8 22:54:47 2023] pci_bus 0000:01: supply vpcie3v3 not found, using dummy regulator [Tue Aug 8 22:54:47 2023] pci_bus 0000:01: supply vpcie3v3aux not found, using dummy regulator [Tue Aug 8 22:54:47 2023] pci_bus 0000:01: supply vpcie12v not found, using dummy regulator [Tue Aug 8 22:54:47 2023] brcm-pcie fd500000.pcie: link up, 5.0 GT/s PCIe x1 (SSC) [Tue Aug 8 22:54:47 2023] pci 0000:01:00.0: [1106:3483] type 00 class 0x0c0330 [Tue Aug 8 22:54:47 2023] pci 0000:01:00.0: reg 0x10: [mem 0x00000000-0x00000fff 64bit] [Tue Aug 8 22:54:47 2023] pci 0000:01:00.0: PME# supported from D0 D3hot [Tue Aug 8 22:54:47 2023] pci 0000:00:00.0: BAR 8: assigned [mem 0x600000000-0x6000fffff] [Tue Aug 8 22:54:47 2023] pci 0000:01:00.0: BAR 0: assigned [mem 0x600000000-0x600000fff 64bit] [Tue Aug 8 22:54:47 2023] pci 0000:00:00.0: PCI bridge to [bus 01] [Tue Aug 8 22:54:47 2023] pci 0000:00:00.0: bridge window [mem 0x600000000-0x6000fffff] [Tue Aug 8 22:54:47 2023] iproc-rng200 fe104000.rng: hwrng registered [Tue Aug 8 22:54:47 2023] vc-mem: phys_addr:0x00000000 mem_base=0x3ec00000 mem_size:0x40000000(1024 MiB) [Tue Aug 8 22:54:47 2023] gpiomem-bcm2835 fe200000.gpiomem: Initialised: Registers at 0xfe200000 [Tue Aug 8 22:54:47 2023] brd: module loaded [Tue Aug 8 22:54:47 2023] loop: module loaded [Tue Aug 8 22:54:47 2023] Loading iSCSI transport class v2.0-870. [Tue Aug 8 22:54:47 2023] bcmgenet fd580000.ethernet: GENET 5.0 EPHY: 0x0000 [Tue Aug 8 22:54:47 2023] unimac-mdio unimac-mdio.-19: Broadcom UniMAC MDIO bus [Tue Aug 8 22:54:47 2023] usbcore: registered new interface driver r8152 [Tue Aug 8 22:54:47 2023] usbcore: registered new interface driver lan78xx [Tue Aug 8 22:54:47 2023] usbcore: registered new interface driver smsc95xx [Tue Aug 8 22:54:47 2023] pci 0000:00:00.0: enabling device (0000 -> 0002) [Tue Aug 8 22:54:47 2023] xhci_hcd 0000:01:00.0: xHCI Host Controller [Tue Aug 8 22:54:47 2023] xhci_hcd 0000:01:00.0: new USB bus registered, assigned bus number 1 [Tue Aug 8 22:54:47 2023] xhci_hcd 0000:01:00.0: hcc params 0x002841eb hci version 0x100 quirks 0x0001e40000000890 [Tue Aug 8 22:54:47 2023] xhci_hcd 0000:01:00.0: xHCI Host Controller [Tue Aug 8 22:54:47 2023] xhci_hcd 0000:01:00.0: new USB bus registered, assigned bus number 2 [Tue Aug 8 22:54:47 2023] xhci_hcd 0000:01:00.0: Host supports USB 3.0 SuperSpeed [Tue Aug 8 22:54:47 2023] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.01 [Tue Aug 8 22:54:47 2023] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [Tue Aug 8 22:54:47 2023] usb usb1: Product: xHCI Host Controller [Tue Aug 8 22:54:47 2023] usb usb1: Manufacturer: Linux 6.1.21-v8+ xhci-hcd [Tue Aug 8 22:54:47 2023] usb usb1: SerialNumber: 0000:01:00.0 [Tue Aug 8 22:54:47 2023] hub 1-0:1.0: USB hub found [Tue Aug 8 22:54:47 2023] hub 1-0:1.0: 1 port detected [Tue Aug 8 22:54:47 2023] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 6.01 [Tue Aug 8 22:54:47 2023] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [Tue Aug 8 22:54:47 2023] usb usb2: Product: xHCI Host Controller [Tue Aug 8 22:54:47 2023] usb usb2: Manufacturer: Linux 6.1.21-v8+ xhci-hcd [Tue Aug 8 22:54:47 2023] usb usb2: SerialNumber: 0000:01:00.0 [Tue Aug 8 22:54:47 2023] hub 2-0:1.0: USB hub found [Tue Aug 8 22:54:47 2023] hub 2-0:1.0: 4 ports detected [Tue Aug 8 22:54:47 2023] dwc_otg: version 3.00a 10-AUG-2012 (platform bus) [Tue Aug 8 22:54:47 2023] dwc_otg: FIQ enabled [Tue Aug 8 22:54:47 2023] dwc_otg: NAK holdoff enabled [Tue Aug 8 22:54:47 2023] dwc_otg: FIQ split-transaction FSM enabled [Tue Aug 8 22:54:47 2023] Module dwc_common_port init [Tue Aug 8 22:54:47 2023] usbcore: registered new interface driver uas [Tue Aug 8 22:54:47 2023] usbcore: registered new interface driver usb-storage [Tue Aug 8 22:54:47 2023] mousedev: PS/2 mouse device common for all mice [Tue Aug 8 22:54:47 2023] sdhci: Secure Digital Host Controller Interface driver [Tue Aug 8 22:54:47 2023] sdhci: Copyright(c) Pierre Ossman [Tue Aug 8 22:54:47 2023] sdhci-pltfm: SDHCI platform and OF driver helper [Tue Aug 8 22:54:47 2023] ledtrig-cpu: registered to indicate activity on CPUs [Tue Aug 8 22:54:47 2023] hid: raw HID events driver (C) Jiri Kosina [Tue Aug 8 22:54:47 2023] usbcore: registered new interface driver usbhid [Tue Aug 8 22:54:47 2023] usbhid: USB HID core driver [Tue Aug 8 22:54:47 2023] NET: Registered PF_PACKET protocol family [Tue Aug 8 22:54:47 2023] Key type dns_resolver registered [Tue Aug 8 22:54:47 2023] registered taskstats version 1 [Tue Aug 8 22:54:47 2023] Loading compiled-in X.509 certificates [Tue Aug 8 22:54:47 2023] Key type .fscrypt registered [Tue Aug 8 22:54:47 2023] Key type fscrypt-provisioning registered [Tue Aug 8 22:54:47 2023] uart-pl011 fe201000.serial: there is not valid maps for state default [Tue Aug 8 22:54:47 2023] uart-pl011 fe201000.serial: cts_event_workaround enabled [Tue Aug 8 22:54:47 2023] fe201000.serial: ttyAMA0 at MMIO 0xfe201000 (irq = 36, base_baud = 0) is a PL011 rev2 [Tue Aug 8 22:54:47 2023] bcm2835-wdt bcm2835-wdt: Broadcom BCM2835 watchdog timer [Tue Aug 8 22:54:47 2023] bcm2835-power bcm2835-power: Broadcom BCM2835 power domains driver [Tue Aug 8 22:54:47 2023] mmc-bcm2835 fe300000.mmcnr: mmc_debug:0 mmc_debug2:0 [Tue Aug 8 22:54:47 2023] mmc-bcm2835 fe300000.mmcnr: DMA channel allocated [Tue Aug 8 22:54:47 2023] of_cfs_init [Tue Aug 8 22:54:47 2023] of_cfs_init: OK [Tue Aug 8 22:54:47 2023] mmc0: SDHCI controller on fe340000.mmc [fe340000.mmc] using ADMA [Tue Aug 8 22:54:47 2023] Waiting for root device PARTUUID=105e3ec4-02... [Tue Aug 8 22:54:47 2023] mmc1: new high speed SDIO card at address 0001 [Tue Aug 8 22:54:47 2023] mmc0: new ultra high speed DDR50 SDHC card at address aaaa [Tue Aug 8 22:54:47 2023] mmcblk0: mmc0:aaaa SL16G 14.8 GiB [Tue Aug 8 22:54:47 2023] mmcblk0: p1 p2 [Tue Aug 8 22:54:47 2023] mmcblk0: mmc0:aaaa SL16G 14.8 GiB (quirks 0x00004000) [Tue Aug 8 22:54:47 2023] usb 1-1: new high-speed USB device number 2 using xhci_hcd [Tue Aug 8 22:54:47 2023] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Quota mode: none. [Tue Aug 8 22:54:47 2023] VFS: Mounted root (ext4 filesystem) readonly on device 179:2. [Tue Aug 8 22:54:47 2023] devtmpfs: mounted [Tue Aug 8 22:54:47 2023] Freeing unused kernel memory: 4160K [Tue Aug 8 22:54:47 2023] Run /sbin/init as init process [Tue Aug 8 22:54:47 2023] with arguments: [Tue Aug 8 22:54:47 2023] /sbin/init [Tue Aug 8 22:54:47 2023] with environment: [Tue Aug 8 22:54:47 2023] HOME=/ [Tue Aug 8 22:54:47 2023] TERM=linux [Tue Aug 8 22:54:47 2023] usb 1-1: New USB device found, idVendor=2109, idProduct=3431, bcdDevice= 4.21 [Tue Aug 8 22:54:47 2023] usb 1-1: New USB device strings: Mfr=0, Product=1, SerialNumber=0 [Tue Aug 8 22:54:47 2023] usb 1-1: Product: USB2.0 Hub [Tue Aug 8 22:54:47 2023] hub 1-1:1.0: USB hub found [Tue Aug 8 22:54:47 2023] hub 1-1:1.0: 4 ports detected [Tue Aug 8 22:54:48 2023] systemd[1]: System time before build time, advancing clock. [Tue Aug 8 22:54:48 2023] NET: Registered PF_INET6 protocol family [Tue Aug 8 22:54:48 2023] Segment Routing with IPv6 [Tue Aug 8 22:54:48 2023] In-situ OAM (IOAM) with IPv6 [Tue Aug 8 22:54:48 2023] systemd[1]: systemd 247.3-7+deb11u4 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +ZSTD +SECCOMP +BLKID +ELFUTILS +KMOD +IDN2 -IDN +PCRE2 default-hierarchy=unified) [Tue Aug 8 22:54:48 2023] systemd[1]: Detected architecture arm64. [Tue Aug 8 22:54:48 2023] systemd[1]: Set hostname to <raspberrypi4>. [Tue Aug 8 22:54:49 2023] systemd[1]: Queued start job for default target Multi-User System. [Tue Aug 8 22:54:49 2023] systemd[1]: Created slice system-getty.slice. [Tue Aug 8 22:54:49 2023] systemd[1]: Created slice system-modprobe.slice. [Tue Aug 8 22:54:49 2023] systemd[1]: Created slice system-systemd\x2dfsck.slice. [Tue Aug 8 22:54:49 2023] systemd[1]: Created slice User and Session Slice. [Tue Aug 8 22:54:49 2023] systemd[1]: Started Dispatch Password Requests to Console Directory Watch. [Tue Aug 8 22:54:49 2023] systemd[1]: Started Forward Password Requests to Wall Directory Watch. [Tue Aug 8 22:54:49 2023] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point. [Tue Aug 8 22:54:49 2023] systemd[1]: Reached target Local Encrypted Volumes. [Tue Aug 8 22:54:49 2023] systemd[1]: Reached target Paths. [Tue Aug 8 22:54:49 2023] systemd[1]: Reached target Slices. [Tue Aug 8 22:54:49 2023] systemd[1]: Reached target Swap. [Tue Aug 8 22:54:49 2023] systemd[1]: Listening on Syslog Socket. [Tue Aug 8 22:54:49 2023] systemd[1]: Listening on fsck to fsckd communication Socket. [Tue Aug 8 22:54:49 2023] systemd[1]: Listening on initctl Compatibility Named Pipe. [Tue Aug 8 22:54:49 2023] systemd[1]: Listening on Journal Audit Socket. [Tue Aug 8 22:54:49 2023] systemd[1]: Listening on Journal Socket (/dev/log). [Tue Aug 8 22:54:49 2023] systemd[1]: Listening on Journal Socket. [Tue Aug 8 22:54:49 2023] systemd[1]: Listening on udev Control Socket. [Tue Aug 8 22:54:49 2023] systemd[1]: Listening on udev Kernel Socket. [Tue Aug 8 22:54:49 2023] systemd[1]: Condition check resulted in Huge Pages File System being skipped. [Tue Aug 8 22:54:49 2023] systemd[1]: Mounting POSIX Message Queue File System... [Tue Aug 8 22:54:49 2023] systemd[1]: Mounting RPC Pipe File System... [Tue Aug 8 22:54:49 2023] systemd[1]: Mounting Kernel Debug File System... [Tue Aug 8 22:54:49 2023] systemd[1]: Mounting Kernel Trace File System... [Tue Aug 8 22:54:49 2023] systemd[1]: Condition check resulted in Kernel Module supporting RPCSEC_GSS being skipped. [Tue Aug 8 22:54:49 2023] systemd[1]: Starting Restore / save the current clock... [Tue Aug 8 22:54:49 2023] systemd[1]: Starting Set the console keyboard layout... [Tue Aug 8 22:54:49 2023] systemd[1]: Starting Create list of static device nodes for the current kernel... [Tue Aug 8 22:54:49 2023] systemd[1]: Starting Load Kernel Module configfs... [Tue Aug 8 22:54:49 2023] systemd[1]: Starting Load Kernel Module drm... [Tue Aug 8 22:54:49 2023] systemd[1]: Starting Load Kernel Module fuse... [Tue Aug 8 22:54:49 2023] systemd[1]: Condition check resulted in Set Up Additional Binary Formats being skipped. [Tue Aug 8 22:54:49 2023] systemd[1]: Starting File System Check on Root Device... [Tue Aug 8 22:54:49 2023] systemd[1]: Starting Journal Service... [Tue Aug 8 22:54:49 2023] systemd[1]: Starting Load Kernel Modules... [Tue Aug 8 22:54:49 2023] systemd[1]: Starting Coldplug All udev Devices... [Tue Aug 8 22:54:49 2023] fuse: init (API version 7.37) [Tue Aug 8 22:54:49 2023] systemd[1]: Mounted POSIX Message Queue File System. [Tue Aug 8 22:54:49 2023] systemd[1]: Mounted RPC Pipe File System. [Tue Aug 8 22:54:49 2023] systemd[1]: Mounted Kernel Debug File System. [Tue Aug 8 22:54:49 2023] systemd[1]: Mounted Kernel Trace File System. [Tue Aug 8 22:54:49 2023] systemd[1]: Finished Restore / save the current clock. [Tue Aug 8 22:54:49 2023] systemd[1]: Finished Create list of static device nodes for the current kernel. [Tue Aug 8 22:54:49 2023] systemd[1]: modprobe@configfs.service: Succeeded. [Tue Aug 8 22:54:49 2023] systemd[1]: Finished Load Kernel Module configfs. [Tue Aug 8 22:54:49 2023] systemd[1]: modprobe@fuse.service: Succeeded. [Tue Aug 8 22:54:49 2023] systemd[1]: Finished Load Kernel Module fuse. [Tue Aug 8 22:54:49 2023] systemd[1]: Mounting FUSE Control File System... [Tue Aug 8 22:54:49 2023] systemd[1]: Mounting Kernel Configuration File System... [Tue Aug 8 22:54:49 2023] systemd[1]: Started File System Check Daemon to report status. [Tue Aug 8 22:54:49 2023] systemd[1]: Finished Load Kernel Modules. [Tue Aug 8 22:54:49 2023] systemd[1]: Mounted FUSE Control File System. [Tue Aug 8 22:54:49 2023] systemd[1]: Mounted Kernel Configuration File System. [Tue Aug 8 22:54:49 2023] systemd[1]: Starting Apply Kernel Variables... [Tue Aug 8 22:54:49 2023] systemd[1]: modprobe@drm.service: Succeeded. [Tue Aug 8 22:54:49 2023] systemd[1]: Finished Load Kernel Module drm. [Tue Aug 8 22:54:49 2023] systemd[1]: Finished File System Check on Root Device. [Tue Aug 8 22:54:49 2023] systemd[1]: Finished Apply Kernel Variables. [Tue Aug 8 22:54:49 2023] systemd[1]: Starting Remount Root and Kernel File Systems... [Tue Aug 8 22:54:49 2023] systemd[1]: Started Journal Service. [Tue Aug 8 22:54:49 2023] EXT4-fs (mmcblk0p2): re-mounted. Quota mode: none. [Tue Aug 8 22:54:49 2023] systemd-journald[142]: Received client request to flush runtime journal. [Tue Aug 8 22:54:49 2023] systemd-journald[142]: File /var/log/journal/d3a8466ddfb64ce6bef13e128446c843/system.journal corrupted or uncleanly shut down, renaming and replacing. [Tue Aug 8 22:54:50 2023] mc: Linux media interface: v0.10 [Tue Aug 8 22:54:50 2023] vc_sm_cma: module is from the staging directory, the quality is unknown, you have been warned. [Tue Aug 8 22:54:50 2023] bcm2835_vc_sm_cma_probe: Videocore shared memory driver [Tue Aug 8 22:54:50 2023] [vc_sm_connected_init]: start [Tue Aug 8 22:54:50 2023] [vc_sm_connected_init]: installed successfully [Tue Aug 8 22:54:51 2023] brcmstb-i2c fef04500.i2c: @97500hz registered in polling mode [Tue Aug 8 22:54:51 2023] brcmstb-i2c fef09500.i2c: @97500hz registered in polling mode [Tue Aug 8 22:54:51 2023] videodev: Linux video capture interface: v2.00 [Tue Aug 8 22:54:51 2023] snd_bcm2835: module is from the staging directory, the quality is unknown, you have been warned. [Tue Aug 8 22:54:51 2023] bcm2835_audio bcm2835_audio: card created with 8 channels [Tue Aug 8 22:54:51 2023] bcm2835_mmal_vchiq: module is from the staging directory, the quality is unknown, you have been warned. [Tue Aug 8 22:54:51 2023] bcm2835_mmal_vchiq: module is from the staging directory, the quality is unknown, you have been warned. [Tue Aug 8 22:54:51 2023] bcm2835_mmal_vchiq: module is from the staging directory, the quality is unknown, you have been warned. [Tue Aug 8 22:54:51 2023] rpivid_hevc: module is from the staging directory, the quality is unknown, you have been warned. [Tue Aug 8 22:54:51 2023] bcm2835_codec: module is from the staging directory, the quality is unknown, you have been warned. [Tue Aug 8 22:54:51 2023] bcm2835_v4l2: module is from the staging directory, the quality is unknown, you have been warned. [Tue Aug 8 22:54:51 2023] bcm2835_isp: module is from the staging directory, the quality is unknown, you have been warned. [Tue Aug 8 22:54:51 2023] bcm2835-codec bcm2835-codec: Device registered as /dev/video10 [Tue Aug 8 22:54:51 2023] bcm2835-codec bcm2835-codec: Loaded V4L2 decode [Tue Aug 8 22:54:51 2023] bcm2835-codec bcm2835-codec: Device registered as /dev/video11 [Tue Aug 8 22:54:51 2023] bcm2835-codec bcm2835-codec: Loaded V4L2 encode [Tue Aug 8 22:54:51 2023] bcm2835-codec bcm2835-codec: Device registered as /dev/video12 [Tue Aug 8 22:54:51 2023] bcm2835-codec bcm2835-codec: Loaded V4L2 isp [Tue Aug 8 22:54:51 2023] rpivid feb10000.codec: Device registered as /dev/video19 [Tue Aug 8 22:54:51 2023] [drm] Initialized v3d 1.0.0 20180419 for fec00000.v3d on minor 0 [Tue Aug 8 22:54:51 2023] bcm2835-codec bcm2835-codec: Device registered as /dev/video18 [Tue Aug 8 22:54:51 2023] bcm2835-codec bcm2835-codec: Loaded V4L2 image_fx [Tue Aug 8 22:54:51 2023] bcm2835-codec bcm2835-codec: Device registered as /dev/video31 [Tue Aug 8 22:54:51 2023] bcm2835-codec bcm2835-codec: Loaded V4L2 encode_image [Tue Aug 8 22:54:51 2023] bcm2835-isp bcm2835-isp: Device node output[0] registered as /dev/video13 [Tue Aug 8 22:54:51 2023] bcm2835-isp bcm2835-isp: Device node capture[0] registered as /dev/video14 [Tue Aug 8 22:54:51 2023] bcm2835-isp bcm2835-isp: Device node capture[1] registered as /dev/video15 [Tue Aug 8 22:54:51 2023] bcm2835-isp bcm2835-isp: Device node stats[2] registered as /dev/video16 [Tue Aug 8 22:54:51 2023] bcm2835-isp bcm2835-isp: Register output node 0 with media controller [Tue Aug 8 22:54:51 2023] bcm2835-isp bcm2835-isp: Register capture node 1 with media controller [Tue Aug 8 22:54:51 2023] bcm2835-isp bcm2835-isp: Register capture node 2 with media controller [Tue Aug 8 22:54:51 2023] bcm2835-isp bcm2835-isp: Register capture node 3 with media controller [Tue Aug 8 22:54:51 2023] bcm2835-isp bcm2835-isp: Device node output[0] registered as /dev/video20 [Tue Aug 8 22:54:51 2023] bcm2835-isp bcm2835-isp: Device node capture[0] registered as /dev/video21 [Tue Aug 8 22:54:51 2023] bcm2835-isp bcm2835-isp: Device node capture[1] registered as /dev/video22 [Tue Aug 8 22:54:51 2023] bcm2835-isp bcm2835-isp: Device node stats[2] registered as /dev/video23 [Tue Aug 8 22:54:51 2023] bcm2835-isp bcm2835-isp: Register output node 0 with media controller [Tue Aug 8 22:54:51 2023] bcm2835-isp bcm2835-isp: Register capture node 1 with media controller [Tue Aug 8 22:54:51 2023] bcm2835-isp bcm2835-isp: Register capture node 2 with media controller [Tue Aug 8 22:54:51 2023] bcm2835-isp bcm2835-isp: Register capture node 3 with media controller [Tue Aug 8 22:54:51 2023] bcm2835-isp bcm2835-isp: Loaded V4L2 bcm2835-isp [Tue Aug 8 22:54:52 2023] cfg80211: Loading compiled-in X.509 certificates for regulatory database [Tue Aug 8 22:54:52 2023] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7' [Tue Aug 8 22:54:52 2023] cfg80211: loaded regulatory.db is malformed or signature is missing/invalid[Tue Aug 8 22:54:52 2023] brcmfmac: F1 signature read @0x18000000=0x15264345 [Tue Aug 8 22:54:52 2023] brcmfmac: brcmf_fw_alloc_request: using brcm/brcmfmac43455-sdio for chip BCM4345/6 [Tue Aug 8 22:54:52 2023] usbcore: registered new interface driver brcmfmac [Tue Aug 8 22:54:52 2023] brcmfmac: brcmf_c_preinit_dcmds: Firmware: BCM4345/6 wl0: Nov 1 2021 00:37:25 version 7.45.241 (1a2f2fa CY) FWID 01-703fd60 [Tue Aug 8 22:54:52 2023] vc4-drm gpu: bound fe400000.hvs (ops vc4_hvs_ops [vc4]) [Tue Aug 8 22:54:52 2023] Registered IR keymap rc-cec [Tue Aug 8 22:54:52 2023] rc rc0: vc4-hdmi-0 as /devices/platform/soc/fef00700.hdmi/rc/rc0 [Tue Aug 8 22:54:52 2023] input: vc4-hdmi-0 as /devices/platform/soc/fef00700.hdmi/rc/rc0/input0 [Tue Aug 8 22:54:52 2023] vc4-drm gpu: bound fef00700.hdmi (ops vc4_hdmi_ops [vc4]) [Tue Aug 8 22:54:52 2023] Registered IR keymap rc-cec [Tue Aug 8 22:54:52 2023] rc rc1: vc4-hdmi-1 as /devices/platform/soc/fef05700.hdmi/rc/rc1 [Tue Aug 8 22:54:52 2023] input: vc4-hdmi-1 as /devices/platform/soc/fef05700.hdmi/rc/rc1/input1 [Tue Aug 8 22:54:52 2023] vc4-drm gpu: bound fef05700.hdmi (ops vc4_hdmi_ops [vc4]) [Tue Aug 8 22:54:52 2023] vc4-drm gpu: bound fe004000.txp (ops vc4_txp_ops [vc4]) [Tue Aug 8 22:54:52 2023] vc4-drm gpu: bound fe206000.pixelvalve (ops vc4_crtc_ops [vc4]) [Tue Aug 8 22:54:52 2023] vc4-drm gpu: bound fe207000.pixelvalve (ops vc4_crtc_ops [vc4]) [Tue Aug 8 22:54:52 2023] vc4-drm gpu: bound fe20a000.pixelvalve (ops vc4_crtc_ops [vc4]) [Tue Aug 8 22:54:52 2023] vc4-drm gpu: bound fe216000.pixelvalve (ops vc4_crtc_ops [vc4]) [Tue Aug 8 22:54:52 2023] vc4-drm gpu: bound fec12000.pixelvalve (ops vc4_crtc_ops [vc4]) [Tue Aug 8 22:54:53 2023] [drm] Initialized vc4 0.0.0 20140616 for gpu on minor 1 [Tue Aug 8 22:54:53 2023] vc4-drm gpu: [drm] Cannot find any crtc or sizes [Tue Aug 8 22:54:53 2023] uart-pl011 fe201000.serial: no DMA platform data [Tue Aug 8 22:54:53 2023] 8021q: 802.1Q VLAN Support v1.8 [Tue Aug 8 22:54:53 2023] Adding 102396k swap on /var/swap. Priority:-2 extents:1 across:102396k SSFS [Tue Aug 8 22:54:54 2023] bcmgenet fd580000.ethernet: configuring instance for external RGMII (RX delay) [Tue Aug 8 22:54:54 2023] bcmgenet fd580000.ethernet eth0: Link is Down [Tue Aug 8 22:54:58 2023] bcmgenet fd580000.ethernet eth0: Link is Up - 1Gbps/Full - flow control rx/tx [Tue Aug 8 22:54:58 2023] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready [Tue Aug 8 22:54:59 2023] ICMPv6: process `dhcpcd' is using deprecated sysctl (syscall) net.ipv6.neigh.eth0.retrans_time - use net.ipv6.neigh.eth0.retrans_time_ms instead [Tue Aug 8 22:55:01 2023] Bluetooth: Core ver 2.22[Tue Aug 8 22:55:01 2023] NET: Registered PF_BLUETOOTH protocol family [Tue Aug 8 22:55:01 2023] Bluetooth: HCI device and connection manager initialized [Tue Aug 8 22:55:01 2023] Bluetooth: HCI socket layer initialized [Tue Aug 8 22:55:01 2023] Bluetooth: L2CAP socket layer initialized [Tue Aug 8 22:55:01 2023] Bluetooth: SCO socket layer initialized [Tue Aug 8 22:55:01 2023] Bluetooth: HCI UART driver ver 2.3 [Tue Aug 8 22:55:01 2023] Bluetooth: HCI UART protocol H4 registered [Tue Aug 8 22:55:01 2023] Bluetooth: HCI UART protocol Three-wire (H5) registered [Tue Aug 8 22:55:01 2023] Bluetooth: HCI UART protocol Broadcom registered [Tue Aug 8 22:55:01 2023] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [Tue Aug 8 22:55:01 2023] Bluetooth: BNEP filters: protocol multicast [Tue Aug 8 22:55:01 2023] Bluetooth: BNEP socket layer initialized [Tue Aug 8 22:55:01 2023] Bluetooth: MGMT ver 1.22[Tue Aug 8 22:55:01 2023] NET: Registered PF_ALG protocol family -
Was wäre denn in dem Fall wahrscheinlicher? Defekte Speicherkarte oder gar ein defekt am Raspberry?
Danke
-
Keine Ahnung.
-
@rsw2004 sagte in ioBroker funktioniert nicht mehr:
Defekte Speicherkarte oder gar ein defekt am Raspberry?
Ich habe hier einige Raspberry's am Laufen. SD-Karten sind mir schon einige abgeflogen. Die "preiswerteste" Variante wäre wohl testweise es mal mit einer frischen zu versuchen - so würde ich herangehen.
Ro75.
-
Wenn du nicht nur was zum Spielen brauchst solltest du eine SSD an den Raspi anschließen.
SD ist immer problematisch -
@mcm57 sagte in ioBroker funktioniert nicht mehr:
Da stimme ich dir zu 100% zu. Nur hier ging es ja um
Was wäre denn in dem Fall wahrscheinlicher? Defekte Speicherkarte oder gar ein defekt am Raspberry?
-
@mcm57
Ich denke das wäre für meine Zwecke etwas dick aufgetragen. Im Endeffekt kopple ich mit ioBroker lediglich eine handvoll Funktionen aus meinem KNX-System mit HomeKit und nutze Geofencing um die Heizung runterzuregeln, wenn Bereich verlassen wird.
Also tatsächlich Spielerei. -
Irgendwelche Empfehlung was Hersteller und Typ betrifft?
Dann werde ich mir demnächst mal eine Neue besorgen. -
Ich hatte zu meiner SD-Karten-Zeit ausschließlich Samsung im Einsatz.
Bis auf einmal, als ich auf eine billige Intenso aus dem Supermarkt notgedrungen ausgewichen bin. Die hat dann auch nur wenige Wochen gehalten. Lesson learned... -
@rsw2004
Bei ca 20,-- EUR für 240GB ?
Da kommt ja die SD schon fast teurer...Abgesehen davon dass du natürlich ein USB Gehäuse brauchst. (Argon One M2 oder ein anderes)
https://geizhals.at/?cat=hdssd&xf=1035_Western+Digital
(Keine direkte Empfehlung, soll nur zeigen dass die ssd Preise für kleine ssds im Keller sind) -
@mcm57 sagte in ioBroker funktioniert nicht mehr:
dass die ssd Preise für kleine ssds im Keller sin
nicht nur für kleine!
M2 NVMe 1TB für unter 50 Euro https://www.alternate.de/listing.xhtml?q=nvme+1tb&s=price_asc
