Influxdb datengrösse

cainam

@dp20eic
DANKE, du bist genial...

wegen dem bier - gerne wo bist du denn zuhause

jetzt sieht es so aus

root@Daten:~# df
Filesystem     1K-blocks    Used Available Use% Mounted on
/dev/loop0      15375304 4712560   9859928  33% /
none                 492       4       488   1% /dev
udev             3952404       0   3952404   0% /dev/tty
tmpfs            3987136       0   3987136   0% /dev/shm
tmpfs            1594856      60   1594796   1% /run
tmpfs               5120       0      5120   0% /run/lock

einiges besser

kann ich das truncate mit dem auth.log auch machen?

@cainam sagte in Influxdb datengrösse:

wieso ist das so wichtig nicht als root? ich bin ja alleine der zugriff hat und ob ich was mit sudo xxxx zerstöre oder als root... gibts da ein unterschied?

Moin,

bin zu faul, hier alles zu schreiben, aber hier -> https://wiki.ubuntuusers.de/mit_Root-Rechten_arbeiten/ ist das wichtigst gesagt.

Auch ich hatte auf den Servern nie wirklich root Zugriff, obwohl ich das Passwort wusste, ich bin immer über meinen persönlichen User auf den ~ 200 - 300 Servern unterwegs gewesen, nur wenn wir neue Software auf die Systeme gebracht haben, dann habe ich mal als root gearbeitet, würde ich aber heute nicht mehr so machen

VG
Bernd

@cainam sagte in Influxdb datengrösse:

kann ich das truncate mit dem auth.log auch machen?

Moin,

nein, glaube da gibt es einen anderen Trick, denn auch das File ist Binär, daher geht das nicht mit truncate ich schaue mal in meinem verstaubten Kämmerchen (Brain) nach.

VG
Bernd

cainam

@dp20eic said in Influxdb datengrösse:

P.S.: eins noch vorweg, es ist bei Deiner Installation etwas nicht korrekt, denn es sollte eigentlich ein Log Rotation stattfinden, entweder bei einer gewissen Größe oder einem gewissen alter eines Log Files und dann sollten es auch nur x Gepackte Log Files geben, siehe syslog,x.gz aber das Packen scheint nicht mehr zu funktionieren, könnte man an den Zeiten der Files sehen, seit wann.

soll ich influxdb neu installieren oder gibt das ein chaos?

Thomas Braun

@cainam sagte in Influxdb datengrösse:

ob ich was mit sudo xxxx zerstöre oder als root... gibts da ein unterschied?

Als root wird JEDER Befehl, ob sinnvoll oder nicht, ob gefährlich oder nicht ohne Rückmeldung gnadenlos durchgerasselt.
Der Prefix 'sudo' gibt dir also die Chance, darüber nachzudenken, ob der Befehl vielleicht nicht doch besser ohne root-Rechte zu verwenden ist. Und du fällst nach dem sudo auch wieder in die user-Rolle zurück.
Das ist also das was für den Metzger der Kettenhandschuh ist oder für den Schweißer seine Schweißbrille. Amateure oder Lebensmüde (oder lebensmüde Amateure) kommen vermeintlich ohne diese Dinge viel besser zurecht. Ist aber ein Trugschluss, die Profis wissen warum sie ihre Schutzausrüstung anlegen.

ich bin ja alleine der zugriff hat

Auch das ist ein Trugschluss. Kannst dir per

cat /etc/passwd

ja mal die Liste der User auf der Kiste ansehen. Die haben alle spezifische Rechte und Einschränkungen.

@cainam sagte in Influxdb datengrösse:

soll ich influxdb neu installieren oder gibt das ein chaos?

Moin,

das ist nicht nötig, wenn jetzt erst einmal etwas aufgeräumt ist, kann man sich die verschiedenen Files mal anschauen und findet ja, vielleicht heraus, warum die Logs nicht mehr rotierten und dann angewachsen sind, bis sie auch nicht mehr gepackt werden konnten.

VG
Bernd

@dp20eic sagte in Influxdb datengrösse:

glaube da gibt es einen anderen Trick, denn auch das File ist Binär

Moin,

noch mal ein selbst Zitat.
Habe dummes Zeug geschrieben, ist keine Binär Datei, kann mal mit truncate machen oder

# > /vat/log/auth.log

Da diese Datei auch besondere Rechte hat entweder auch als root oder Dein User muss in die adm Gruppe, damit das mit sudo klappt.
Aber man sollte sich wirklich mal /etc/logrotate.conf und /etc/logrotate.d/* anschauen, ob alles korrekt eingerichtet ist, denn dann muss man da nicht viel aufwand mit dem House Keeping machen.

VG
Bernd

cainam

@dp20eic said in Influxdb datengrösse:

/etc/logrotate.conf

 cat /etc/logrotate.conf
# see "man logrotate" for details

# global options do not affect preceding include directives

# rotate log files weekly
weekly

# keep 4 weeks worth of backlogs
rotate 4

# create new (empty) log files after rotating old ones
create

# use date as a suffix of the rotated file
#dateext

# uncomment this if you want your log files compressed
#compress

# packages drop log rotation information into this directory
include /etc/logrotate.d

# system-specific logs may also be configured here.

/etc/logrotate.d/*

cat /etc/logrotate.conf
# see "man logrotate" for details

# global options do not affect preceding include directives

# rotate log files weekly
weekly

# keep 4 weeks worth of backlogs
rotate 4

# create new (empty) log files after rotating old ones
create

# use date as a suffix of the rotated file
#dateext

# uncomment this if you want your log files compressed
#compress

# packages drop log rotation information into this directory
include /etc/logrotate.d

# system-specific logs may also be configured here.
root@Daten:~# cat /etc/logrotate.d/*
/var/log/alternatives.log {
        monthly
        rotate 12
        compress
        delaycompress
        missingok
        notifempty
        create 644 root root
}
/var/log/apt/term.log {
  rotate 12
  monthly
  compress
  missingok
  notifempty
}

/var/log/apt/history.log {
  rotate 12
  monthly
  compress
  missingok
  notifempty
}

# no packages own btmp -- we'll rotate it here
/var/log/btmp {
    missingok
    monthly
    create 0660 root utmp
    rotate 1
}
/var/log/dpkg.log {
        monthly
        rotate 12
        compress
        delaycompress
        missingok
        notifempty
        create 644 root root
}
/var/log/influxdb/influxd.log {
    daily
    rotate 7
    missingok
    dateext
    copytruncate
    compress
}
/var/log/syslog
/var/log/mail.info
/var/log/mail.warn
/var/log/mail.err
/var/log/mail.log
/var/log/daemon.log
/var/log/kern.log
/var/log/auth.log
/var/log/user.log
/var/log/lpr.log
/var/log/cron.log
/var/log/debug
/var/log/messages
{
        rotate 4
        weekly
        missingok
        notifempty
        compress
        delaycompress
        sharedscripts
        postrotate
                /usr/lib/rsyslog/rsyslog-rotate
        endscript
}
/var/log/unattended-upgrades/unattended-upgrades.log
/var/log/unattended-upgrades/unattended-upgrades-dpkg.log
/var/log/unattended-upgrades/unattended-upgrades-shutdown.log
{
  rotate 6
  monthly
  compress
  missingok
  notifempty
}
# no packages own wtmp -- we'll rotate it here
/var/log/wtmp {
    missingok
    monthly
    create 0664 root utmp
    minsize 1M
    rotate 1
}
root@Daten:~#

siehst du was da falsch ist?

@cainam sagte in Influxdb datengrösse:

/etc/logrotate.conf

Moin,

ist untergegengen, aber nein in der Datei /etc/logrotate.conf ist alles ok uns auch bei den Dateien in /etc/logrotate.d/* sehe ich auf Anhieb auch keinen Fehler.

Jetzt mal schauen, ob der Dienst auch läuft

dp20eic@iobroker:~$ systemctl status logrotate.timer 
* logrotate.timer - Daily rotation of log files
     Loaded: loaded (/lib/systemd/system/logrotate.timer; enabled; vendor preset: enabled)
     Active: active (waiting) since Wed 2023-09-20 14:48:42 CEST; 1 day 17h ago
    Trigger: Sat 2023-09-23 00:00:00 CEST; 15h left
   Triggers: * logrotate.service
       Docs: man:logrotate(8)
             man:logrotate.conf(5)

Warning: some journal files were not opened due to insufficient permissions.

dp20eic@iobroker:~$ systemctl status logrotate.service 
* logrotate.service - Rotate log files
     Loaded: loaded (/lib/systemd/system/logrotate.service; static)
     Active: inactive (dead) since Fri 2023-09-22 00:00:35 CEST; 8h ago
TriggeredBy: * logrotate.timer
       Docs: man:logrotate(8)
             man:logrotate.conf(5)
    Process: 24906 ExecStart=/usr/sbin/logrotate /etc/logrotate.conf (code=exited, status=0/SUCCESS)
   Main PID: 24906 (code=exited, status=0/SUCCESS)
        CPU: 52ms

VG
Bernd

cainam

scheint ein Teil läuft nicht...?

root@Daten:~# systemctl status logrotate.timer
* logrotate.timer - Daily rotation of log files
     Loaded: loaded (/lib/systemd/system/logrotate.timer; enabled; vendor preset: enabled)
     Active: active (waiting) since Thu 2023-09-28 18:26:39 CEST; 2h 42min ago
    Trigger: Fri 2023-09-29 00:00:00 CEST; 2h 50min left
   Triggers: * logrotate.service
       Docs: man:logrotate(8)
             man:logrotate.conf(5)

Sep 28 18:26:39 Daten systemd[1]: Started Daily rotation of log files.
root@Daten:~# systemctl status logrotate.service
* logrotate.service - Rotate log files
     Loaded: loaded (/lib/systemd/system/logrotate.service; static)
     Active: failed (Result: exit-code) since Thu 2023-09-28 18:26:40 CEST; 2h 43min ago
TriggeredBy: * logrotate.timer
       Docs: man:logrotate(8)
             man:logrotate.conf(5)
    Process: 110 ExecStart=/usr/sbin/logrotate /etc/logrotate.conf (code=exited, status=226/NAMESPACE)
   Main PID: 110 (code=exited, status=226/NAMESPACE)
        CPU: 31ms

Sep 28 18:26:39 Daten systemd[1]: Starting Rotate log files...
Sep 28 18:26:40 Daten systemd[110]: logrotate.service: Failed to set up mount namespacing: /run/systemd/unit-root/proc:>Sep 28 18:26:40 Daten systemd[110]: logrotate.service: Failed at step NAMESPACE spawning /usr/sbin/logrotate: Permissio>Sep 28 18:26:40 Daten systemd[1]: logrotate.service: Main process exited, code=exited, status=226/NAMESPACE
Sep 28 18:26:40 Daten systemd[1]: logrotate.service: Failed with result 'exit-code'.
Sep 28 18:26:40 Daten systemd[1]: Failed to start Rotate log files.
lines 1-16/16 (END)...skipping...
* logrotate.service - Rotate log files
     Loaded: loaded (/lib/systemd/system/logrotate.service; static)
     Active: failed (Result: exit-code) since Thu 2023-09-28 18:26:40 CEST; 2h 43min ago
TriggeredBy: * logrotate.timer
       Docs: man:logrotate(8)
             man:logrotate.conf(5)
    Process: 110 ExecStart=/usr/sbin/logrotate /etc/logrotate.conf (code=exited, status=226/NAMESPACE)
   Main PID: 110 (code=exited, status=226/NAMESPACE)
        CPU: 31ms

Sep 28 18:26:39 Daten systemd[1]: Starting Rotate log files...
Sep 28 18:26:40 Daten systemd[110]: logrotate.service: Failed to set up mount namespacing: /run/systemd/unit-root/proc:>Sep 28 18:26:40 Daten systemd[110]: logrotate.service: Failed at step NAMESPACE spawning /usr/sbin/logrotate: Permissio>Sep 28 18:26:40 Daten systemd[1]: logrotate.service: Main process exited, code=exited, status=226/NAMESPACE
Sep 28 18:26:40 Daten systemd[1]: logrotate.service: Failed with result 'exit-code'.
Sep 28 18:26:40 Daten systemd[1]: Failed to start Rotate log files.
~
~
~
~
~
~
~
~
~
~
~
~
~
~
lines 1-16/16 (END)...skipping...
* logrotate.service - Rotate log files
     Loaded: loaded (/lib/systemd/system/logrotate.service; static)
     Active: failed (Result: exit-code) since Thu 2023-09-28 18:26:40 CEST; 2h 43min ago
TriggeredBy: * logrotate.timer
       Docs: man:logrotate(8)
             man:logrotate.conf(5)
    Process: 110 ExecStart=/usr/sbin/logrotate /etc/logrotate.conf (code=exited, status=226/NAMESPACE)
   Main PID: 110 (code=exited, status=226/NAMESPACE)
        CPU: 31ms

Sep 28 18:26:39 Daten systemd[1]: Starting Rotate log files...
Sep 28 18:26:40 Daten systemd[110]: logrotate.service: Failed to set up mount namespacing: /run/systemd/unit-root/proc:>Sep 28 18:26:40 Daten systemd[110]: logrotate.service: Failed at step NAMESPACE spawning /usr/sbin/logrotate: Permissio>Sep 28 18:26:40 Daten systemd[1]: logrotate.service: Main process exited, code=exited, status=226/NAMESPACE
Sep 28 18:26:40 Daten systemd[1]: logrotate.service: Failed with result 'exit-code'.
Sep 28 18:26:40 Daten systemd[1]: Failed to start Rotate log files.
~
~
~
~
~
~
~
~
~
~
~
~
~
~
~
~
~
~
~
lines 1-16/16 (END)...skipping...
* logrotate.service - Rotate log files
     Loaded: loaded (/lib/systemd/system/logrotate.service; static)
     Active: failed (Result: exit-code) since Thu 2023-09-28 18:26:40 CEST; 2h 43min ago
TriggeredBy: * logrotate.timer
       Docs: man:logrotate(8)
             man:logrotate.conf(5)
    Process: 110 ExecStart=/usr/sbin/logrotate /etc/logrotate.conf (code=exited, status=226/NAMESPACE)
   Main PID: 110 (code=exited, status=226/NAMESPACE)
        CPU: 31ms

Sep 28 18:26:39 Daten systemd[1]: Starting Rotate log files...
Sep 28 18:26:40 Daten systemd[110]: logrotate.service: Failed to set up mount namespacing: /run/systemd/unit-root/proc:>Sep 28 18:26:40 Daten systemd[110]: logrotate.service: Failed at step NAMESPACE spawning /usr/sbin/logrotate: Permissio>Sep 28 18:26:40 Daten systemd[1]: logrotate.service: Main process exited, code=exited, status=226/NAMESPACE
Sep 28 18:26:40 Daten systemd[1]: logrotate.service: Failed with result 'exit-code'.
Sep 28 18:26:40 Daten systemd[1]: Failed to start Rotate log files.
~
~
~
~
~
~
~
~
~
~
~
~
~
~
~
~
~
~
~
~
lines 1-16/16 (END)...skipping...
* logrotate.service - Rotate log files
     Loaded: loaded (/lib/systemd/system/logrotate.service; static)
     Active: failed (Result: exit-code) since Thu 2023-09-28 18:26:40 CEST; 2h 43min ago
TriggeredBy: * logrotate.timer
       Docs: man:logrotate(8)
             man:logrotate.conf(5)
    Process: 110 ExecStart=/usr/sbin/logrotate /etc/logrotate.conf (code=exited, status=226/NAMESPACE)
   Main PID: 110 (code=exited, status=226/NAMESPACE)
        CPU: 31ms

Sep 28 18:26:39 Daten systemd[1]: Starting Rotate log files...
Sep 28 18:26:40 Daten systemd[110]: logrotate.service: Failed to set up mount namespacing: /run/systemd/unit-root/proc:>
Sep 28 18:26:40 Daten systemd[110]: logrotate.service: Failed at step NAMESPACE spawning /usr/sbin/logrotate: Permissio>
Sep 28 18:26:40 Daten systemd[1]: logrotate.service: Main process exited, code=exited, status=226/NAMESPACE
Sep 28 18:26:40 Daten systemd[1]: logrotate.service: Failed with result 'exit-code'.
Sep 28 18:26:40 Daten systemd[1]: Failed to start Rotate log files.

journalctl:

root@Daten:~# journalctl
-- Journal begins at Fri 2023-09-15 19:07:38 CEST, ends at Thu 2023-09-28 21:10:56 CEST. --
Sep 15 19:07:38 Daten systemd-journald[44]: System Journal (/var/log/journal/c5b67cb2fb4c49678a4fd62f7e4a2b20) is 1.4G,>
Sep 15 19:07:55 Daten dbus-daemon[117]: [system] Failed to activate service 'org.freedesktop.login1': timed out (servic>
Sep 15 19:07:56 Daten dbus-daemon[117]: [system] Activating via systemd: service name='org.freedesktop.login1' unit='db>
Sep 15 19:07:56 Daten systemd[1]: Starting Load Kernel Module drm...
Sep 15 19:07:56 Daten systemd[1]: Starting Cleanup of Temporary Directories...
Sep 15 19:07:56 Daten systemd[1]: modprobe@drm.service: Succeeded.
Sep 15 19:07:56 Daten systemd[1]: Finished Load Kernel Module drm.
Sep 15 19:07:56 Daten systemd[1]: Starting User Login Management...
Sep 15 19:07:56 Daten systemd[136165]: systemd-logind.service: Failed to set up mount namespacing: /run/systemd/unit-ro>
Sep 15 19:07:56 Daten systemd[136165]: systemd-logind.service: Failed at step NAMESPACE spawning /lib/systemd/systemd-l>
Sep 15 19:07:56 Daten systemd[1]: systemd-logind.service: Main process exited, code=exited, status=226/NAMESPACE
Sep 15 19:07:56 Daten systemd[1]: systemd-logind.service: Failed with result 'exit-code'.
Sep 15 19:07:56 Daten systemd[1]: Failed to start User Login Management.
Sep 15 19:07:56 Daten systemd[1]: systemd-logind.service: Scheduled restart job, restart counter is at 1.
Sep 15 19:07:56 Daten systemd[1]: Stopped User Login Management.
Sep 15 19:07:56 Daten systemd[1]: Starting Load Kernel Module drm...
Sep 15 19:07:56 Daten systemd[1]: modprobe@drm.service: Succeeded.
Sep 15 19:07:56 Daten systemd[1]: Finished Load Kernel Module drm.
Sep 15 19:07:56 Daten systemd[1]: Starting User Login Management...
Sep 15 19:07:56 Daten systemd[136169]: systemd-logind.service: Failed to set up mount namespacing: /run/systemd/unit-ro>
Sep 15 19:07:56 Daten systemd[136169]: systemd-logind.service: Failed at step NAMESPACE spawning /lib/systemd/systemd-l>
Sep 15 19:07:56 Daten systemd[1]: systemd-logind.service: Main process exited, code=exited, status=226/NAMESPACE
Sep 15 19:07:56 Daten systemd[1]: systemd-logind.service: Failed with result 'exit-code'.
Sep 15 19:07:56 Daten systemd[1]: Failed to start User Login Management.
Sep 15 19:07:56 Daten systemd[1]: systemd-logind.service: Scheduled restart job, restart counter is at 2.
Sep 15 19:07:56 Daten systemd[1]: Stopped User Login Management.
Sep 15 19:07:56 Daten systemd[1]: Starting Load Kernel Module drm...
Sep 15 19:07:56 Daten systemd[1]: modprobe@drm.service: Succeeded.
Sep 15 19:07:56 Daten systemd[1]: Finished Load Kernel Module drm.
Sep 15 19:07:56 Daten systemd[1]: Starting User Login Management...
Sep 15 19:07:56 Daten systemd[136173]: systemd-logind.service: Failed to set up mount namespacing: /run/systemd/unit-ro>
Sep 15 19:07:56 Daten systemd[136173]: systemd-logind.service: Failed at step NAMESPACE spawning /lib/systemd/systemd-l>
Sep 15 19:07:56 Daten systemd[1]: systemd-logind.service: Main process exited, code=exited, status=226/NAMESPACE
Sep 15 19:07:56 Daten systemd[1]: systemd-logind.service: Failed with result 'exit-code'.
Sep 15 19:07:56 Daten systemd[1]: Failed to start User Login Management.
Sep 15 19:07:56 Daten systemd[1]: systemd-logind.service: Scheduled restart job, restart counter is at 3.

@cainam sagte in Influxdb datengrösse:

scheint ein Teil läuft nicht...?

Moin,

also das sieht beim logrotate.timer gut aus, ist active, so wie bei mir auch

dp20eic@iobroker:~$ systemctl status logrotate.timer 
* logrotate.timer - Daily rotation of log files
     Loaded: loaded (/lib/systemd/system/logrotate.timer; enabled; vendor preset: enabled)
     Active: active (waiting) since Sun 2023-09-24 12:08:26 CEST; 4 days ago
    Trigger: Fri 2023-09-29 00:00:00 CEST; 2h 45min left
   Triggers: * logrotate.service
       Docs: man:logrotate(8)
             man:logrotate.conf(5)

Warning: some journal files were not opened due to insufficient permissions.

Aber der Service logrotate.service, da stimmt was nicht, der darf nicht geladen sein, der wird vom logrotate.timer getriggert, Sollte so aussehen

dp20eic@iobroker:~$ systemctl status logrotate.service 
* logrotate.service - Rotate log files
     Loaded: loaded (/lib/systemd/system/logrotate.service; static)
     Active: inactive (dead) since Thu 2023-09-28 00:00:14 CEST; 21h ago
TriggeredBy: * logrotate.timer
       Docs: man:logrotate(8)
             man:logrotate.conf(5)
    Process: 60466 ExecStart=/usr/sbin/logrotate /etc/logrotate.conf (code=exited, status=0/SUCCESS)
   Main PID: 60466 (code=exited, status=0/SUCCESS)
        CPU: 56ms

Mach mal

# sudo systemctl stop logrotate.service
# sudo systemctl stop logrotate.timer
# sudo systemctl start logrotate.timer

Dann noch mal den Status kontrollieren

# sudo systemctl status logrotate.timer
# sudo systemctl status logrotate.service

VG
Bernd

cainam

@dp20eic

same same

root@Daten:~# sudo systemctl stop logrotate.timer
root@Daten:~# sudo systemctl start logrotate.timer
root@Daten:~# sudo systemctl status logrotate.timer
* logrotate.timer - Daily rotation of log files
     Loaded: loaded (/lib/systemd/system/logrotate.timer; enabled; vendor preset: enabled)
     Active: active (waiting) since Thu 2023-09-28 22:09:27 CEST; 5s ago
    Trigger: Fri 2023-09-29 00:00:00 CEST; 1h 50min left
   Triggers: * logrotate.service
       Docs: man:logrotate(8)
             man:logrotate.conf(5)

Sep 28 22:09:27 Daten systemd[1]: Started Daily rotation of log files.
root@Daten:~# sudo systemctl status logrotate.service
* logrotate.service - Rotate log files
     Loaded: loaded (/lib/systemd/system/logrotate.service; static)
     Active: failed (Result: exit-code) since Thu 2023-09-28 21:12:55 CEST; 56min ago
TriggeredBy: * logrotate.timer
       Docs: man:logrotate(8)
             man:logrotate.conf(5)
    Process: 8217 ExecStart=/usr/sbin/logrotate /etc/logrotate.conf (code=exited, status=226/NAMESPACE)
   Main PID: 8217 (code=exited, status=226/NAMESPACE)
        CPU: 22ms

Warning: journal has been rotated since unit was started, output may be incomplete.
root@Daten:~#

@cainam sagte in Influxdb datengrösse:

same same

Moin,

da scheint dann doch ein Problem in der Konfiguration von logrotate zu sein, was sagt

sudo journalctl -g logrotate

Wenn da nichts kommt, dann einmal logrotate auf der Kommandozeile von Hand ausführen

# sudo logrotate /etc/logrotate.d/*

Und mal den Output von

# sudo systemctl show logrotate.service

VG
Bernd

P.S.: Habe nicht alles nochmals gelesen, aber auf welchem System läuft das alles?

cainam

@dp20eic ist ein Debian welches über Proxmox auf im Container läuft:

 sudo journalctl -g logrotate
-- Journal begins at Thu 2023-09-28 21:21:12 CEST, ends at Fri 2023-09-29 18:38:38 CEST. --
Sep 28 22:09:11 Daten sudo[10976]:     root : TTY=pts/3 ; PWD=/root ; USER=root ; COMMAND=/bin/systemctl stop logrotate>Sep 28 22:09:20 Daten sudo[10979]:     root : TTY=pts/3 ; PWD=/root ; USER=root ; COMMAND=/bin/systemctl stop logrotate>Sep 28 22:09:20 Daten systemd[1]: logrotate.timer: Succeeded.
Sep 28 22:09:27 Daten sudo[11002]:     root : TTY=pts/3 ; PWD=/root ; USER=root ; COMMAND=/bin/systemctl start logrotat>Sep 28 22:09:33 Daten sudo[11005]:     root : TTY=pts/3 ; PWD=/root ; USER=root ; COMMAND=/bin/systemctl status logrota>Sep 28 22:09:42 Daten sudo[11008]:     root : TTY=pts/3 ; PWD=/root ; USER=root ; COMMAND=/bin/systemctl status logrota>Sep 28 22:10:33 Daten sudo[11052]:     root : TTY=pts/3 ; PWD=/root ; USER=root ; COMMAND=/bin/systemctl start logrotat>Sep 28 22:10:33 Daten systemd[11055]: logrotate.service: Failed to set up mount namespacing: /run/systemd/unit-root/pro>Sep 28 22:10:33 Daten systemd[11055]: logrotate.service: Failed at step NAMESPACE spawning /usr/sbin/logrotate: Permiss>Sep 28 22:10:33 Daten systemd[1]: logrotate.service: Main process exited, code=exited, status=226/NAMESPACE
Sep 28 22:10:33 Daten systemd[1]: logrotate.service: Failed with result 'exit-code'.
Sep 29 00:00:23 Daten systemd[16432]: logrotate.service: Failed to set up mount namespacing: /run/systemd/unit-root/pro>Sep 29 00:00:23 Daten systemd[16432]: logrotate.service: Failed at step NAMESPACE spawning /usr/sbin/logrotate: Permiss>Sep 29 00:00:23 Daten systemd[1]: logrotate.service: Main process exited, code=exited, status=226/NAMESPACE
Sep 29 00:00:23 Daten systemd[1]: logrotate.service: Failed with result 'exit-code'.
Sep 29 18:38:38 Daten sudo[68704]:     root : TTY=pts/3 ; PWD=/root ; USER=root ; COMMAND=/bin/journalctl -g logrotate

root@Daten:~# # sudo logrotate /etc/logrotate.d/*
root@Daten:~# # sudo systemctl show logrotate.service
root@Daten:~# sudo systemctl show logrotate.service
Type=oneshot
Restart=no
NotifyAccess=none
RestartUSec=100ms
TimeoutStartUSec=infinity
TimeoutStopUSec=1min 30s
TimeoutAbortUSec=1min 30s
TimeoutStartFailureMode=terminate
TimeoutStopFailureMode=terminate
RuntimeMaxUSec=infinity
WatchdogUSec=0
WatchdogTimestampMonotonic=0
RootDirectoryStartOnly=no
RemainAfterExit=no
GuessMainPID=yes
MainPID=0
ControlPID=0
FileDescriptorStoreMax=0
NFileDescriptorStore=0
StatusErrno=0
Result=exit-code
ReloadResult=success
CleanResult=success
UID=[not set]
GID=[not set]
NRestarts=0
OOMPolicy=stop
ExecMainStartTimestamp=Fri 2023-09-29 00:00:23 CEST
ExecMainStartTimestampMonotonic=1314514365181
lines 1-29...skipping...
Type=oneshot
Restart=no
NotifyAccess=none
RestartUSec=100ms
TimeoutStartUSec=infinity
TimeoutStopUSec=1min 30s
TimeoutAbortUSec=1min 30s
TimeoutStartFailureMode=terminate
TimeoutStopFailureMode=terminate
RuntimeMaxUSec=infinity
WatchdogUSec=0
WatchdogTimestampMonotonic=0
RootDirectoryStartOnly=no
RemainAfterExit=no
GuessMainPID=yes
MainPID=0
ControlPID=0
FileDescriptorStoreMax=0
NFileDescriptorStore=0
StatusErrno=0
Result=exit-code
ReloadResult=success
CleanResult=success
UID=[not set]
GID=[not set]
NRestarts=0
OOMPolicy=stop
ExecMainStartTimestamp=Fri 2023-09-29 00:00:23 CEST
ExecMainStartTimestampMonotonic=1314514365181
ExecMainExitTimestamp=Fri 2023-09-29 00:00:23 CEST
ExecMainExitTimestampMonotonic=1314514587246
ExecMainPID=16432
ExecMainCode=1
ExecMainStatus=226
ExecStart={ path=/usr/sbin/logrotate ; argv[]=/usr/sbin/logrotate /etc/logrotate.conf ; ignore_errors=no ; start_time=[>ExecStartEx={ path=/usr/sbin/logrotate ; argv[]=/usr/sbin/logrotate /etc/logrotate.conf ; flags= ; start_time=[Fri 2023>Slice=system.slice
MemoryCurrent=[not set]
CPUUsageNSec=32613000
EffectiveCPUs=
EffectiveMemoryNodes=
TasksCurrent=[not set]
IPIngressBytes=[no data]
IPIngressPackets=[no data]
lines 1-44...skipping...
Type=oneshot
Restart=no
NotifyAccess=none
RestartUSec=100ms
TimeoutStartUSec=infinity
TimeoutStopUSec=1min 30s
TimeoutAbortUSec=1min 30s
TimeoutStartFailureMode=terminate
TimeoutStopFailureMode=terminate
RuntimeMaxUSec=infinity
WatchdogUSec=0
WatchdogTimestampMonotonic=0
RootDirectoryStartOnly=no
RemainAfterExit=no
GuessMainPID=yes
MainPID=0
ControlPID=0
FileDescriptorStoreMax=0
NFileDescriptorStore=0
StatusErrno=0
Result=exit-code
ReloadResult=success
CleanResult=success
UID=[not set]
GID=[not set]
NRestarts=0
OOMPolicy=stop
ExecMainStartTimestamp=Fri 2023-09-29 00:00:23 CEST
ExecMainStartTimestampMonotonic=1314514365181
ExecMainExitTimestamp=Fri 2023-09-29 00:00:23 CEST
ExecMainExitTimestampMonotonic=1314514587246
ExecMainPID=16432
ExecMainCode=1
ExecMainStatus=226
ExecStart={ path=/usr/sbin/logrotate ; argv[]=/usr/sbin/logrotate /etc/logrotate.conf ; ignore_errors=no ; start_time=[>ExecStartEx={ path=/usr/sbin/logrotate ; argv[]=/usr/sbin/logrotate /etc/logrotate.conf ; flags= ; start_time=[Fri 2023>Slice=system.slice
MemoryCurrent=[not set]
CPUUsageNSec=32613000
EffectiveCPUs=
EffectiveMemoryNodes=
TasksCurrent=[not set]
IPIngressBytes=[no data]
IPIngressPackets=[no data]
IPEgressBytes=[no data]
IPEgressPackets=[no data]
lines 1-46...skipping...
Type=oneshot
Restart=no
NotifyAccess=none
RestartUSec=100ms
TimeoutStartUSec=infinity
TimeoutStopUSec=1min 30s
TimeoutAbortUSec=1min 30s
TimeoutStartFailureMode=terminate
TimeoutStopFailureMode=terminate
RuntimeMaxUSec=infinity
WatchdogUSec=0
WatchdogTimestampMonotonic=0
RootDirectoryStartOnly=no
RemainAfterExit=no
GuessMainPID=yes
MainPID=0
ControlPID=0
FileDescriptorStoreMax=0
NFileDescriptorStore=0
StatusErrno=0
Result=exit-code
ReloadResult=success
CleanResult=success
UID=[not set]
GID=[not set]
NRestarts=0
OOMPolicy=stop
ExecMainStartTimestamp=Fri 2023-09-29 00:00:23 CEST
ExecMainStartTimestampMonotonic=1314514365181
ExecMainExitTimestamp=Fri 2023-09-29 00:00:23 CEST
ExecMainExitTimestampMonotonic=1314514587246
ExecMainPID=16432
ExecMainCode=1
ExecMainStatus=226
ExecStart={ path=/usr/sbin/logrotate ; argv[]=/usr/sbin/logrotate /etc/logrotate.conf ; ignore_errors=no ; start_time=[>ExecStartEx={ path=/usr/sbin/logrotate ; argv[]=/usr/sbin/logrotate /etc/logrotate.conf ; flags= ; start_time=[Fri 2023>Slice=system.slice
MemoryCurrent=[not set]
CPUUsageNSec=32613000
EffectiveCPUs=
EffectiveMemoryNodes=
TasksCurrent=[not set]
IPIngressBytes=[no data]
IPIngressPackets=[no data]
IPEgressBytes=[no data]
IPEgressPackets=[no data]
IOReadBytes=18446744073709551615
lines 1-47...skipping...
Type=oneshot
Restart=no
NotifyAccess=none
RestartUSec=100ms
TimeoutStartUSec=infinity
TimeoutStopUSec=1min 30s
TimeoutAbortUSec=1min 30s
TimeoutStartFailureMode=terminate
TimeoutStopFailureMode=terminate
RuntimeMaxUSec=infinity
WatchdogUSec=0
WatchdogTimestampMonotonic=0
RootDirectoryStartOnly=no
RemainAfterExit=no
GuessMainPID=yes
MainPID=0
ControlPID=0
FileDescriptorStoreMax=0
NFileDescriptorStore=0
StatusErrno=0
Result=exit-code
ReloadResult=success
CleanResult=success
UID=[not set]
GID=[not set]
NRestarts=0
OOMPolicy=stop
ExecMainStartTimestamp=Fri 2023-09-29 00:00:23 CEST
ExecMainStartTimestampMonotonic=1314514365181
ExecMainExitTimestamp=Fri 2023-09-29 00:00:23 CEST
ExecMainExitTimestampMonotonic=1314514587246
ExecMainPID=16432
ExecMainCode=1
ExecMainStatus=226
ExecStart={ path=/usr/sbin/logrotate ; argv[]=/usr/sbin/logrotate /etc/logrotate.conf ; ignore_errors=no ; start_time=[>ExecStartEx={ path=/usr/sbin/logrotate ; argv[]=/usr/sbin/logrotate /etc/logrotate.conf ; flags= ; start_time=[Fri 2023>Slice=system.slice
MemoryCurrent=[not set]
CPUUsageNSec=32613000
EffectiveCPUs=
EffectiveMemoryNodes=
TasksCurrent=[not set]
IPIngressBytes=[no data]
IPIngressPackets=[no data]
IPEgressBytes=[no data]
IPEgressPackets=[no data]
IOReadBytes=18446744073709551615
IOReadOperations=18446744073709551615
lines 1-48...skipping...
Type=oneshot
Restart=no
NotifyAccess=none
RestartUSec=100ms
TimeoutStartUSec=infinity
TimeoutStopUSec=1min 30s
TimeoutAbortUSec=1min 30s
TimeoutStartFailureMode=terminate
TimeoutStopFailureMode=terminate
RuntimeMaxUSec=infinity
WatchdogUSec=0
WatchdogTimestampMonotonic=0
RootDirectoryStartOnly=no
RemainAfterExit=no
GuessMainPID=yes
MainPID=0
ControlPID=0
FileDescriptorStoreMax=0
NFileDescriptorStore=0
StatusErrno=0
Result=exit-code
ReloadResult=success
CleanResult=success
UID=[not set]
GID=[not set]
NRestarts=0
OOMPolicy=stop
ExecMainStartTimestamp=Fri 2023-09-29 00:00:23 CEST
ExecMainStartTimestampMonotonic=1314514365181
ExecMainExitTimestamp=Fri 2023-09-29 00:00:23 CEST
ExecMainExitTimestampMonotonic=1314514587246
ExecMainPID=16432
ExecMainCode=1
ExecMainStatus=226
ExecStart={ path=/usr/sbin/logrotate ; argv[]=/usr/sbin/logrotate /etc/logrotate.conf ; ignore_errors=no ; start_time=[>ExecStartEx={ path=/usr/sbin/logrotate ; argv[]=/usr/sbin/logrotate /etc/logrotate.conf ; flags= ; start_time=[Fri 2023>Slice=system.slice
MemoryCurrent=[not set]
CPUUsageNSec=32613000
EffectiveCPUs=
EffectiveMemoryNodes=
TasksCurrent=[not set]
IPIngressBytes=[no data]
IPIngressPackets=[no data]
IPEgressBytes=[no data]
IPEgressPackets=[no data]
IOReadBytes=18446744073709551615
IOReadOperations=18446744073709551615
IOWriteBytes=18446744073709551615
lines 1-49...skipping...
Type=oneshot
Restart=no
NotifyAccess=none
RestartUSec=100ms
TimeoutStartUSec=infinity
TimeoutStopUSec=1min 30s
TimeoutAbortUSec=1min 30s
TimeoutStartFailureMode=terminate
TimeoutStopFailureMode=terminate
RuntimeMaxUSec=infinity
WatchdogUSec=0
WatchdogTimestampMonotonic=0
RootDirectoryStartOnly=no
RemainAfterExit=no
GuessMainPID=yes
MainPID=0
ControlPID=0
FileDescriptorStoreMax=0
NFileDescriptorStore=0
StatusErrno=0
Result=exit-code
ReloadResult=success
CleanResult=success
UID=[not set]
GID=[not set]
NRestarts=0
OOMPolicy=stop
ExecMainStartTimestamp=Fri 2023-09-29 00:00:23 CEST
ExecMainStartTimestampMonotonic=1314514365181
ExecMainExitTimestamp=Fri 2023-09-29 00:00:23 CEST
ExecMainExitTimestampMonotonic=1314514587246
ExecMainPID=16432
ExecMainCode=1
ExecMainStatus=226
ExecStart={ path=/usr/sbin/logrotate ; argv[]=/usr/sbin/logrotate /etc/logrotate.conf ; ignore_errors=no ; start_time=[>ExecStartEx={ path=/usr/sbin/logrotate ; argv[]=/usr/sbin/logrotate /etc/logrotate.conf ; flags= ; start_time=[Fri 2023>Slice=system.slice
MemoryCurrent=[not set]
CPUUsageNSec=32613000
EffectiveCPUs=
EffectiveMemoryNodes=
TasksCurrent=[not set]
IPIngressBytes=[no data]
IPIngressPackets=[no data]
IPEgressBytes=[no data]
IPEgressPackets=[no data]
IOReadBytes=18446744073709551615
IOReadOperations=18446744073709551615
IOWriteBytes=18446744073709551615
IOWriteOperations=18446744073709551615
lines 1-50...skipping...
Type=oneshot
Restart=no
NotifyAccess=none
RestartUSec=100ms
TimeoutStartUSec=infinity
TimeoutStopUSec=1min 30s
TimeoutAbortUSec=1min 30s
TimeoutStartFailureMode=terminate
TimeoutStopFailureMode=terminate
RuntimeMaxUSec=infinity
WatchdogUSec=0
WatchdogTimestampMonotonic=0
RootDirectoryStartOnly=no
RemainAfterExit=no
GuessMainPID=yes
MainPID=0
ControlPID=0
FileDescriptorStoreMax=0
NFileDescriptorStore=0
StatusErrno=0
Result=exit-code
ReloadResult=success
CleanResult=success
UID=[not set]
GID=[not set]
NRestarts=0
OOMPolicy=stop
ExecMainStartTimestamp=Fri 2023-09-29 00:00:23 CEST
ExecMainStartTimestampMonotonic=1314514365181
ExecMainExitTimestamp=Fri 2023-09-29 00:00:23 CEST
ExecMainExitTimestampMonotonic=1314514587246
ExecMainPID=16432
ExecMainCode=1
ExecMainStatus=226
ExecStart={ path=/usr/sbin/logrotate ; argv[]=/usr/sbin/logrotate /etc/logrotate.conf ; ignore_errors=no ; start_time=[>ExecStartEx={ path=/usr/sbin/logrotate ; argv[]=/usr/sbin/logrotate /etc/logrotate.conf ; flags= ; start_time=[Fri 2023>Slice=system.slice
MemoryCurrent=[not set]
CPUUsageNSec=32613000
EffectiveCPUs=
EffectiveMemoryNodes=
TasksCurrent=[not set]
IPIngressBytes=[no data]
IPIngressPackets=[no data]
IPEgressBytes=[no data]
IPEgressPackets=[no data]
IOReadBytes=18446744073709551615
IOReadOperations=18446744073709551615
IOWriteBytes=18446744073709551615
IOWriteOperations=18446744073709551615
Delegate=no
CPUAccounting=yes
CPUWeight=[not set]
StartupCPUWeight=[not set]
CPUShares=[not set]
StartupCPUShares=[not set]
CPUQuotaPerSecUSec=infinity
CPUQuotaPeriodUSec=infinity
AllowedCPUs=
AllowedMemoryNodes=
IOAccounting=no
IOWeight=[not set]
StartupIOWeight=[not set]
lines 1-63...skipping...
Type=oneshot
Restart=no
NotifyAccess=none
RestartUSec=100ms
TimeoutStartUSec=infinity
TimeoutStopUSec=1min 30s
TimeoutAbortUSec=1min 30s
TimeoutStartFailureMode=terminate
TimeoutStopFailureMode=terminate
RuntimeMaxUSec=infinity
WatchdogUSec=0
WatchdogTimestampMonotonic=0
RootDirectoryStartOnly=no
RemainAfterExit=no
GuessMainPID=yes
MainPID=0
ControlPID=0
FileDescriptorStoreMax=0
NFileDescriptorStore=0
StatusErrno=0
Result=exit-code
ReloadResult=success
CleanResult=success
UID=[not set]
GID=[not set]
NRestarts=0
OOMPolicy=stop
ExecMainStartTimestamp=Fri 2023-09-29 00:00:23 CEST
ExecMainStartTimestampMonotonic=1314514365181
ExecMainExitTimestamp=Fri 2023-09-29 00:00:23 CEST
ExecMainExitTimestampMonotonic=1314514587246
ExecMainPID=16432
ExecMainCode=1
ExecMainStatus=226
ExecStart={ path=/usr/sbin/logrotate ; argv[]=/usr/sbin/logrotate /etc/logrotate.conf ; ignore_errors=no ; start_time=[>ExecStartEx={ path=/usr/sbin/logrotate ; argv[]=/usr/sbin/logrotate /etc/logrotate.conf ; flags= ; start_time=[Fri 2023>Slice=system.slice
MemoryCurrent=[not set]
CPUUsageNSec=32613000
EffectiveCPUs=
EffectiveMemoryNodes=
TasksCurrent=[not set]
IPIngressBytes=[no data]
IPIngressPackets=[no data]
IPEgressBytes=[no data]
IPEgressPackets=[no data]
IOReadBytes=18446744073709551615
IOReadOperations=18446744073709551615
IOWriteBytes=18446744073709551615
IOWriteOperations=18446744073709551615
Delegate=no
CPUAccounting=yes
CPUWeight=[not set]
StartupCPUWeight=[not set]
CPUShares=[not set]
StartupCPUShares=[not set]
CPUQuotaPerSecUSec=infinity
CPUQuotaPeriodUSec=infinity
AllowedCPUs=
AllowedMemoryNodes=
IOAccounting=no
IOWeight=[not set]
StartupIOWeight=[not set]
BlockIOAccounting=no
BlockIOWeight=[not set]
StartupBlockIOWeight=[not set]
MemoryAccounting=yes
DefaultMemoryLow=0
lines 1-68...skipping...
Type=oneshot
Restart=no
NotifyAccess=none
RestartUSec=100ms
TimeoutStartUSec=infinity
TimeoutStopUSec=1min 30s
TimeoutAbortUSec=1min 30s
TimeoutStartFailureMode=terminate
TimeoutStopFailureMode=terminate
RuntimeMaxUSec=infinity
WatchdogUSec=0
WatchdogTimestampMonotonic=0
RootDirectoryStartOnly=no
RemainAfterExit=no
GuessMainPID=yes
MainPID=0
ControlPID=0
FileDescriptorStoreMax=0
NFileDescriptorStore=0
StatusErrno=0
Result=exit-code
ReloadResult=success
CleanResult=success
UID=[not set]
GID=[not set]
NRestarts=0
OOMPolicy=stop
ExecMainStartTimestamp=Fri 2023-09-29 00:00:23 CEST
ExecMainStartTimestampMonotonic=1314514365181
ExecMainExitTimestamp=Fri 2023-09-29 00:00:23 CEST
ExecMainExitTimestampMonotonic=1314514587246
ExecMainPID=16432
ExecMainCode=1
ExecMainStatus=226
ExecStart={ path=/usr/sbin/logrotate ; argv[]=/usr/sbin/logrotate /etc/logrotate.conf ; ignore_errors=no ; start_time=[>
ExecStartEx={ path=/usr/sbin/logrotate ; argv[]=/usr/sbin/logrotate /etc/logrotate.conf ; flags= ; start_time=[Fri 2023>
Slice=system.slice
MemoryCurrent=[not set]
CPUUsageNSec=32613000
EffectiveCPUs=
EffectiveMemoryNodes=
TasksCurrent=[not set]
IPIngressBytes=[no data]
IPIngressPackets=[no data]
IPEgressBytes=[no data]
IPEgressPackets=[no data]
IOReadBytes=18446744073709551615
IOReadOperations=18446744073709551615
IOWriteBytes=18446744073709551615
IOWriteOperations=18446744073709551615
Delegate=no
CPUAccounting=yes
CPUWeight=[not set]
StartupCPUWeight=[not set]
CPUShares=[not set]
StartupCPUShares=[not set]
CPUQuotaPerSecUSec=infinity
CPUQuotaPeriodUSec=infinity
AllowedCPUs=
AllowedMemoryNodes=
IOAccounting=no
IOWeight=[not set]
StartupIOWeight=[not set]
BlockIOAccounting=no
BlockIOWeight=[not set]
StartupBlockIOWeight=[not set]
MemoryAccounting=yes
DefaultMemoryLow=0
DefaultMemoryMin=0
MemoryMin=0
MemoryLow=0
MemoryHigh=infinity
MemoryMax=infinity
MemorySwapMax=infinity
MemoryLimit=infinity
DevicePolicy=closed
DeviceAllow=char-rtc r
TasksAccounting=yes
TasksMax=9263
IPAccounting=no
ManagedOOMSwap=auto
ManagedOOMMemoryPressure=auto
ManagedOOMMemoryPressureLimitPercent=0%
UMask=0022
LimitCPU=infinity
LimitCPUSoft=infinity
LimitFSIZE=infinity
LimitFSIZESoft=infinity
LimitDATA=infinity
LimitDATASoft=infinity
LimitSTACK=infinity
LimitSTACKSoft=8388608
LimitCORE=infinity
LimitCORESoft=0
LimitRSS=infinity
LimitRSSSoft=infinity
LimitNOFILE=524288
LimitNOFILESoft=1024
LimitAS=infinity
LimitASSoft=infinity
LimitNPROC=30877
LimitNPROCSoft=30877
LimitMEMLOCK=65536
LimitMEMLOCKSoft=65536
LimitLOCKS=infinity
LimitLOCKSSoft=infinity
LimitSIGPENDING=30877
LimitSIGPENDINGSoft=30877
LimitMSGQUEUE=819200
LimitMSGQUEUESoft=819200
LimitNICE=0
LimitNICESoft=0
LimitRTPRIO=0
LimitRTPRIOSoft=0
LimitRTTIME=infinity
LimitRTTIMESoft=infinity
RootHashSignature=
OOMScoreAdjust=0
CoredumpFilter=0x33
Nice=19
IOSchedulingClass=2
IOSchedulingPriority=7
CPUSchedulingPolicy=0
CPUSchedulingPriority=0
CPUAffinity=
CPUAffinityFromNUMA=no
NUMAPolicy=n/a
NUMAMask=
TimerSlackNSec=50000
CPUSchedulingResetOnFork=no
NonBlocking=no
StandardInput=null
StandardInputData=
StandardOutput=journal
StandardError=inherit
TTYReset=no
TTYVHangup=no
TTYVTDisallocate=no
SyslogPriority=30
SyslogLevelPrefix=yes
SyslogLevel=6
SyslogFacility=3
LogLevelMax=-1
LogRateLimitIntervalUSec=0
LogRateLimitBurst=0
SecureBits=0
CapabilityBoundingSet=cap_chown cap_dac_override cap_dac_read_search cap_fowner cap_fsetid cap_kill cap_setgid cap_setu>
AmbientCapabilities=
DynamicUser=no
RemoveIPC=no
MountFlags=
PrivateTmp=yes
PrivateDevices=yes
ProtectClock=yes
ProtectKernelTunables=yes
ProtectKernelModules=yes
ProtectKernelLogs=yes
ProtectControlGroups=yes
PrivateNetwork=no
PrivateUsers=no
PrivateMounts=no
ProtectHome=no
ProtectSystem=full
SameProcessGroup=no
UtmpMode=init
IgnoreSIGPIPE=yes
NoNewPrivileges=no
SystemCallErrorNumber=2147483646
LockPersonality=yes
RuntimeDirectoryPreserve=no
RuntimeDirectoryMode=0755
StateDirectoryMode=0755
CacheDirectoryMode=0755
LogsDirectoryMode=0755
ConfigurationDirectoryMode=0755
TimeoutCleanUSec=infinity
MemoryDenyWriteExecute=yes
RestrictRealtime=yes
RestrictSUIDSGID=no
RestrictNamespaces=yes
MountAPIVFS=no
KeyringMode=private
ProtectProc=default
ProcSubset=all
ProtectHostname=yes
KillMode=control-group
KillSignal=15
RestartKillSignal=15
FinalKillSignal=9
SendSIGKILL=yes
SendSIGHUP=no
WatchdogSignal=6
Id=logrotate.service
Names=logrotate.service
Requires=system.slice sysinit.target
Conflicts=shutdown.target
Before=shutdown.target
After=basic.target systemd-tmpfiles-setup.service system.slice sysinit.target logrotate.timer -.mount systemd-journald.>
TriggeredBy=logrotate.timer
RequiresMountsFor=/var/tmp /tmp /var/log
Documentation="man:logrotate(8)" "man:logrotate.conf(5)"
Description=Rotate log files
LoadState=loaded
ActiveState=failed
FreezerState=running
SubState=failed
FragmentPath=/lib/systemd/system/logrotate.service
UnitFileState=static
UnitFilePreset=enabled
StateChangeTimestamp=Fri 2023-09-29 00:00:23 CEST
StateChangeTimestampMonotonic=1314514587707
InactiveExitTimestamp=Fri 2023-09-29 00:00:23 CEST
InactiveExitTimestampMonotonic=1314514365709
ActiveEnterTimestampMonotonic=0
ActiveExitTimestampMonotonic=0
InactiveEnterTimestamp=Fri 2023-09-29 00:00:23 CEST
InactiveEnterTimestampMonotonic=1314514587707
CanStart=yes
CanStop=yes
CanReload=no
CanIsolate=no
CanFreeze=yes
StopWhenUnneeded=no
RefuseManualStart=no
RefuseManualStop=no
AllowIsolate=no
DefaultDependencies=yes
OnFailureJobMode=replace
IgnoreOnIsolate=no
NeedDaemonReload=no
JobTimeoutUSec=infinity
JobRunningTimeoutUSec=infinity
JobTimeoutAction=none
ConditionResult=yes
AssertResult=yes
ConditionTimestamp=Fri 2023-09-29 00:00:23 CEST
ConditionTimestampMonotonic=1314514352209
AssertTimestamp=Fri 2023-09-29 00:00:23 CEST
AssertTimestampMonotonic=1314514352277
Transient=no
Perpetual=no
StartLimitIntervalUSec=10s
StartLimitBurst=5
StartLimitAction=none
FailureAction=none
SuccessAction=none
InvocationID=927f6889372c4a79b2c6ab41de217c4e
CollectMode=inactive
lines 180-248/248 (END)

@cainam sagte in Influxdb datengrösse:

@dp20eic ist ein Debian welches über Proxmox auf im Container läuft:

Moin,

zeig mal vom LXC den vergleichbaren Output, hier ein Beispiel

Ich glaube da fehlt Nesting bei Deinem Container.

VG
Bernd

cainam

@dp20eic

genau so wars... habe das jetzt aktiviert...

Danke Tausend

p.s. hast du viele Influxdb maschinen laufen

@cainam sagte in Influxdb datengrösse:

p.s. hast du viele Influxdb maschinen laufen

Moin,

ja, eine alte influxDB V 1.8, dann zwei influxDB, eine wird zur Produktiven umgebaut und eine zum Spielen.

VG
Bernd

NEWS

Influxdb datengrösse

Support us

1.1k
Online

31.7k
Users

79.7k
Topics

1.3m
Posts

NEWS

Influxdb datengrösse

Support us

1.1kOnline

31.7kUsers

79.7kTopics

1.3mPosts

1.1k
Online

31.7k
Users

79.7k
Topics

1.3m
Posts