ioBroker stoppt und startet unbeabsichtigt

RaspiUser

Danke für's "kümmern" ...

js-controller Update erl., dann "iob diag" ...

======================= SUMMARY =======================
                        v.2023-10-10


   Static hostname: ioBroker-Raspi
         Icon name: computer
  Operating System: Raspbian GNU/Linux 10 (buster)
            Kernel: Linux 5.10.103-v7l+
      Architecture: arm

Installation:           native
Kernel:                 armv7l
Userland:               armhf
Timezone:               Europe/Berlin (CEST, +0200)
User-ID:                1000
X-Server:               false
Boot Target:            graphical.target

Pending OS-Updates:     9
Pending iob updates:    0

Nodejs-Installation:    /usr/bin/nodejs         v18.17.1
                        /usr/bin/node           v18.17.1
                        /usr/bin/npm            9.6.7
                        /usr/bin/npx            9.6.7
                        /usr/bin/corepack       0.18.0

Recommended versions are nodejs Server Configured backup period 7200000 is larger than the supported maximum of 35791 minutes. Defaulting to 120 minutes.
Server Configured backup period 7200000 is larger than the supported maximum of 35791 minutes. Defaulting to 120 minutes.
18.18.2 and npm Server Configured backup period 7200000 is larger than the supported maximum of 35791 minutes. Defaulting to 120 minutes.
Server Configured backup period 7200000 is larger than the supported maximum of 35791 minutes. Defaulting to 120 minutes.
9.8.1
Your nodejs installation is correct

MEMORY:
              total        used        free      shared  buff/cache   available
Mem:           1.9G        132M        1.2G         14M        557M        1.6G
Swap:           99M         98M        1.0M
Total:         2.0G        230M        1.2G

Active iob-Instances:   1
Active repo(s): stable

ioBroker Core:          js-controller           5.0.12
                        admin                   6.10.1

ioBroker Status:        Server Configured backup period 7200000 is larger than the supported maximum of 35791 minutes. Defaulting to 120 minutes.
Server Configured backup period 7200000 is larger than the supported maximum of 35791 minutes. Defaulting to 120 minutes.
iobroker is not running on this host.


Objects type: jsonl
States  type: jsonl

Status admin and web instance:
  system.adapter.admin.0                  : admin                 : ioBroker-Raspi                           -  enabled, port: 8081, bind: 0.0.0.0, run as: admin
  system.adapter.web.0                    : web                   : ioBroker-Raspi                           -  enabled, port: 8082, bind: 0.0.0.0, run as: admin

Objects:                6990
States:                 5688

Size of iob-Database:

25M     /opt/iobroker/iobroker-data/objects.jsonl
11M     /opt/iobroker/iobroker-data/objects.json.migrated
11M     /opt/iobroker/iobroker-data/objects.json.bak.migrated
7.3M    /opt/iobroker/iobroker-data/states.jsonl
1.7M    /opt/iobroker/iobroker-data/states.json.migrated
1.7M    /opt/iobroker/iobroker-data/states.json.bak.migrated



=================== END OF SUMMARY ====================

Bei dem NODE Update bin ich unsicher ... geht das noch nach diesem Rezept ?

Thomas Braun

@raspiuser

Geht viel einfacher.:
Betriebssystem auf eine aktuelle Version bringen. Buster ist abgekündigt, EndOfLife erreicht.

Nodejs-Updates kannst du mittels

iob nodejs-update

machen. Zuvor

iob fix

RaspiUser

@thomas-braun said in ioBroker stoppt und startet unbeabsichtigt:

Geht viel einfacher.:

... das Bookworm-Update hatte ich vor einiger Zeit angefangen, wegen Problemen aber aufgehört.

Also mache ich besser dort weiter als "hier ein totes Pferd zu reiten" und setzte den ioBroker komplett neu auf.
Bei der Gelegenheit kann ich ich div. ungenutze Adapter auch gleich weglassen ...

Danke für deinen Anstoss ...

RaspiUser

@Thomas-Braun

... jetzt läuft "Bookworm" und ich habe nur noch häufig genutzte Adapter (ohne Backitup) installiert.
Das ursprüngliche Problem habe ich (bis jetzt) nicht mehr aber beim Aufruf der Admin Oberfläche (mit Passwort Abfrage) stürzt der ioBroker ab und zu ab.
Als Hinweis kommt, dass die Verbindung zu langsam wäre.
Dieser Zustand läßt sich nur brutal mit 5V-raus-rein beenden.
Nach diesem reboot funktioniert der Zugang wieder (bis zum nächsten Mal).

Hier der Log "iob diag" ... hilft das zur Analyse ?

Skript v.2023-10-10

*** BASE SYSTEM ***
 Static hostname: ioBroker-Raspi
       Icon name: computer
Operating System: Debian GNU/Linux 12 (bookworm)
          Kernel: Linux 6.1.21-v8+
    Architecture: arm64

Model           : Raspberry Pi 4 Model B Rev 1.1
Docker          : false
Virtualization  : none
Kernel          : aarch64
Userland        : arm64

Systemuptime and Load:
 09:29:43 up 15 min,  2 users,  load average: 0.33, 0.42, 0.37
CPU threads: 4


*** RASPBERRY THROTTLING ***
Current issues:
No throttling issues detected.

Previously detected issues:
No throttling issues detected.

*** Time and Time Zones ***
               Local time: Sun 2023-10-29 09:29:43 CET
           Universal time: Sun 2023-10-29 08:29:43 UTC
                 RTC time: n/a
                Time zone: Europe/Berlin (CET, +0100)
System clock synchronized: yes
              NTP service: active
          RTC in local TZ: no

*** User and Groups ***
pi
/home/pi
pi adm dialout cdrom sudo audio video plugdev games users input render netdev gpio i2c spi iobroker

*** X-Server-Setup ***
X-Server:       false
Desktop:
Terminal:       tty
Boot Target:    multi-user.target

*** MEMORY ***
               total        used        free      shared  buff/cache   available
Mem:            1.9G        1.4G        281M        1.2M        313M        523M
Swap:           104M          0B        104M
Total:          2.0G        1.4G        386M

         1849 M total memory
         1350 M used memory
         1339 M active memory
          128 M inactive memory
          268 M free memory
           27 M buffer memory
          271 M swap cache
           99 M total swap
            0 M used swap
           99 M free swap

Raspberry only:
oom events: 0
lifetime oom required: 0 Mbytes
total time in oom handler: 0 ms
max time spent in oom handler: 0 ms

*** FAILED SERVICES ***

  UNIT                LOAD   ACTIVE SUB    DESCRIPTION
* vcan0-setup.service loaded failed failed Setup vcan0

LOAD   = Reflects whether the unit definition was properly loaded.
ACTIVE = The high-level unit activation state, i.e. generalization of SUB.
SUB    = The low-level unit activation state, values depend on unit type.
1 loaded units listed.

*** FILESYSTEM ***
Filesystem     Type      Size  Used Avail Use% Mounted on
/dev/root      ext4       15G  4.2G  9.5G  31% /
devtmpfs       devtmpfs  667M     0  667M   0% /dev
tmpfs          tmpfs     925M     0  925M   0% /dev/shm
tmpfs          tmpfs     370M  1.2M  369M   1% /run
tmpfs          tmpfs     5.0M   16K  5.0M   1% /run/lock
/dev/mmcblk0p1 vfat      255M   31M  225M  13% /boot
tmpfs          tmpfs     185M     0  185M   0% /run/user/1000

Messages concerning ext4 filesystem in dmesg:
[Sun Oct 29 09:14:15 2023] Kernel command line: coherent_pool=1M 8250.nr_uarts=0 snd_bcm2835.enable_headphones=0 snd_bcm2835.enable_headphones=1 snd_bcm2835.enable_hdmi=1 snd_bcm2835.enable_hdmi=0  smsc95xx.macaddr=DC:A6:32:12:B4:C8 vc_mem.mem_base=0x3ec00000 vc_mem.mem_size=0x40000000  console=ttyS0,115200 console=tty1 root=PARTUUID=bc66e88d-02 rootfstype=ext4 fsck.repair=yes rootwait
[Sun Oct 29 09:14:16 2023] EXT4-fs (mmcblk0p2): INFO: recovery required on readonly filesystem
[Sun Oct 29 09:14:16 2023] EXT4-fs (mmcblk0p2): write access will be enabled during recovery
[Sun Oct 29 09:14:16 2023] EXT4-fs (mmcblk0p2): orphan cleanup on readonly fs
[Sun Oct 29 09:14:16 2023] EXT4-fs (mmcblk0p2): 1 orphan inode deleted
[Sun Oct 29 09:14:16 2023] EXT4-fs (mmcblk0p2): recovery complete
[Sun Oct 29 09:14:17 2023] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Quota mode: none.
[Sun Oct 29 09:14:17 2023] VFS: Mounted root (ext4 filesystem) readonly on device 179:2.
[Sun Oct 29 09:14:19 2023] EXT4-fs (mmcblk0p2): re-mounted. Quota mode: none.

Show mounted filesystems \(real ones only\):
TARGET  SOURCE         FSTYPE OPTIONS
/       /dev/mmcblk0p2 ext4   rw,noatime
`-/boot /dev/mmcblk0p1 vfat   rw,relatime,fmask=0022,dmask=0022,codepage=437,iocharset=ascii,shortname=mixed,errors=remount-ro

Files in neuralgic directories:

/var:
1.1G    /var/
464M    /var/log
423M    /var/log/journal/ececfd62e7f741458cc0d2ea60d43f93
423M    /var/log/journal
328M    /var/cache

Archived and active journals take up 422.4M in the file system.

/opt/iobroker/backups:
4.0K    /opt/iobroker/backups/

/opt/iobroker/iobroker-data:
221M    /opt/iobroker/iobroker-data/
153M    /opt/iobroker/iobroker-data/files
52M     /opt/iobroker/iobroker-data/files/javascript.admin
41M     /opt/iobroker/iobroker-data/backup-objects
34M     /opt/iobroker/iobroker-data/files/javascript.admin/static

The five largest files in iobroker-data are:
23M     /opt/iobroker/iobroker-data/objects.jsonl
21M     /opt/iobroker/iobroker-data/files/web.admin/static/js/main.edf7552a.js.map
8.3M    /opt/iobroker/iobroker-data/files/web.admin/static/js/main.edf7552a.js
7.1M    /opt/iobroker/iobroker-data/files/javascript.admin/static/js/610.f22de4ab.chunk.js.map
6.3M    /opt/iobroker/iobroker-data/files/admin.admin/custom/static/js/vendors-node_modules_iobroker_adapter-react-v5_assets_devices_parseNames_js-node_modules_iobr-99c23e.847b8ad9.chunk.js.map

USB-Devices by-id:
USB-Sticks -  Avoid direct links to /dev/* in your adapter setups, please always prefer the links 'by-id':

/dev/serial/by-id/usb-ITead_Sonoff_Zigbee_3.0_USB_Dongle_Plus_6edb8350b219ec11a0e039cc47486eb0-if00-port0

*** NodeJS-Installation ***

/usr/bin/nodejs         v18.18.2
/usr/bin/node           v18.18.2
/usr/bin/npm            9.8.1
/usr/bin/npx            9.8.1
/usr/bin/corepack       0.19.0


nodejs:
  Installed: 18.18.2-1nodesource1
  Candidate: 18.18.2-1nodesource1
  Version table:
 *** 18.18.2-1nodesource1 1001
        500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages
        100 /var/lib/dpkg/status
     18.18.1-1nodesource1 1001
        500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages
     18.18.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages
     18.17.1-1nodesource1 1001
        500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages
     18.17.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages
     18.16.1-1nodesource1 1001
        500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages
     18.16.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages
     18.15.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages
     18.14.2-1nodesource1 1001
        500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages
     18.14.1-1nodesource1 1001
        500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages
     18.14.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages
     18.13.0+dfsg1-1 500
        500 http://deb.debian.org/debian bookworm/main arm64 Packages
     18.13.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages
     18.12.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages
     18.11.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages
     18.10.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages
     18.9.1-1nodesource1 1001
        500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages
     18.9.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages
     18.8.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages
     18.7.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages
     18.6.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages
     18.5.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages
     18.4.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages
     18.3.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages
     18.2.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages
     18.1.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages
     18.0.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages

Temp directories causing npm8 problem: 0
No problems detected

Errors in npm tree:

*** ioBroker-Installation ***

ioBroker Status
iobroker is running on this host.


Objects type: jsonl
States  type: jsonl

Core adapters versions
js-controller:  5.0.12
admin:          6.12.0
javascript:     7.1.4

Adapters from github:   0

Adapter State
+ system.adapter.admin.0                  : admin                 : ioBroker-Raspi                           -  enabled, port: 8081, bind: 0.0.0.0, run as: admin
+ system.adapter.alpha-ess.0              : alpha-ess             : ioBroker-Raspi                           -  enabled
+ system.adapter.backitup.0               : backitup              : ioBroker-Raspi                           -  enabled
  system.adapter.canbus.0                 : canbus                : ioBroker-Raspi                           - disabled
  system.adapter.discovery.0              : discovery             : ioBroker-Raspi                           - disabled
  system.adapter.feiertage.0              : feiertage             : ioBroker-Raspi                           -  enabled
+ system.adapter.frontier_silicon.0       : frontier_silicon      : ioBroker-Raspi                           -  enabled
+ system.adapter.hm-rega.0                : hm-rega               : ioBroker-Raspi                           -  enabled
+ system.adapter.hm-rpc.0                 : hm-rpc                : ioBroker-Raspi                           -  enabled, port: 0
+ system.adapter.hm-rpc.1                 : hm-rpc                : ioBroker-Raspi                           -  enabled, port: 0
+ system.adapter.iqontrol.0               : iqontrol              : ioBroker-Raspi                           -  enabled
+ system.adapter.javascript.0             : javascript            : ioBroker-Raspi                           -  enabled
+ system.adapter.lgtv.0                   : lgtv                  : ioBroker-Raspi                           -  enabled
+ system.adapter.mqtt.0                   : mqtt                  : ioBroker-Raspi                           -  enabled, port: 1883, bind: 192.168.178.36
  system.adapter.onkyo.0                  : onkyo                 : ioBroker-Raspi                           - disabled
+ system.adapter.psa.0                    : psa                   : ioBroker-Raspi                           -  enabled
+ system.adapter.sainlogic.0              : sainlogic             : ioBroker-Raspi                           -  enabled, port: 1030, bind: 192.168.178.36
+ system.adapter.shuttercontrol.0         : shuttercontrol        : ioBroker-Raspi                           -  enabled
  system.adapter.simple-api.0             : simple-api            : ioBroker-Raspi                           - disabled, port: 8087, bind: 0.0.0.0, run as: admin
+ system.adapter.sonoff.0                 : sonoff                : ioBroker-Raspi                           -  enabled, port: 1885, bind: 0.0.0.0
+ system.adapter.tankerkoenig.0           : tankerkoenig          : ioBroker-Raspi                           -  enabled
+ system.adapter.telegram.0               : telegram              : ioBroker-Raspi                           -  enabled, port: 8443, bind: 0.0.0.0
+ system.adapter.tr-064.0                 : tr-064                : ioBroker-Raspi                           -  enabled
+ system.adapter.vw-connect.0             : vw-connect            : ioBroker-Raspi                           -  enabled
+ system.adapter.web.0                    : web                   : ioBroker-Raspi                           -  enabled, port: 8082, bind: 0.0.0.0, run as: admin
+ system.adapter.zigbee.0                 : zigbee                : ioBroker-Raspi                           -  enabled, port: /dev/ttyUSB0

+ instance is alive

Enabled adapters with bindings
+ system.adapter.admin.0                  : admin                 : ioBroker-Raspi                           -  enabled, port: 8081, bind: 0.0.0.0, run as: admin
+ system.adapter.hm-rpc.0                 : hm-rpc                : ioBroker-Raspi                           -  enabled, port: 0
+ system.adapter.hm-rpc.1                 : hm-rpc                : ioBroker-Raspi                           -  enabled, port: 0
+ system.adapter.mqtt.0                   : mqtt                  : ioBroker-Raspi                           -  enabled, port: 1883, bind: 192.168.178.36
+ system.adapter.sainlogic.0              : sainlogic             : ioBroker-Raspi                           -  enabled, port: 1030, bind: 192.168.178.36
+ system.adapter.sonoff.0                 : sonoff                : ioBroker-Raspi                           -  enabled, port: 1885, bind: 0.0.0.0
+ system.adapter.telegram.0               : telegram              : ioBroker-Raspi                           -  enabled, port: 8443, bind: 0.0.0.0
+ system.adapter.web.0                    : web                   : ioBroker-Raspi                           -  enabled, port: 8082, bind: 0.0.0.0, run as: admin
+ system.adapter.zigbee.0                 : zigbee                : ioBroker-Raspi                           -  enabled, port: /dev/ttyUSB0

ioBroker-Repositories
stable        : http://download.iobroker.net/sources-dist.json
beta          : http://download.iobroker.net/sources-dist-latest.json

Active repo(s): stable

Installed ioBroker-Instances
Used repository: stable
Adapter    "admin"        : 6.12.0   , installed 6.12.0
Adapter    "alpha-ess"    : 1.0.2    , installed 1.0.2
Adapter    "backitup"     : 2.8.1    , installed 2.8.1
Adapter    "canbus"       : 1.3.1    , installed 1.3.1
Adapter    "discovery"    : 3.1.0    , installed 3.1.0
Adapter    "feiertage"    : 1.1.4    , installed 1.1.4
Adapter    "frontier_silicon": 0.1.1 , installed 0.1.1
Adapter    "hm-rega"      : 3.0.47   , installed 3.0.47
Adapter    "hm-rpc"       : 1.15.19  , installed 1.15.19
Adapter    "iqontrol"     : 2.3.0    , installed 2.3.0
Adapter    "javascript"   : 7.1.4    , installed 7.1.4
Controller "js-controller": 5.0.12   , installed 5.0.12
Adapter    "lgtv"         : 2.1.1    , installed 2.1.1
Adapter    "mqtt"         : 4.1.1    , installed 4.1.1
Adapter    "onkyo"        : 2.1.2    , installed 2.1.2
Adapter    "psa"          : 0.0.11   , installed 0.0.11
Adapter    "sainlogic"    : 0.10.5   , installed 0.10.5
Adapter    "shuttercontrol": 1.6.2   , installed 1.6.2
Adapter    "simple-api"   : 2.7.2    , installed 2.7.2
Adapter    "socketio"     : 6.5.5    , installed 6.5.5
Adapter    "sonoff"       : 2.5.3    , installed 2.5.3
Adapter    "tankerkoenig" : 3.3.7    , installed 3.3.7
Adapter    "telegram"     : 1.16.0   , installed 1.16.0
Adapter    "tr-064"       : 4.2.18   , installed 4.2.18
Adapter    "vw-connect"   : 0.0.67   , installed 0.0.67
Adapter    "web"          : 6.1.2    , installed 6.1.2
Adapter    "ws"           : 2.5.5    , installed 2.5.5
Adapter    "zigbee"       : 1.8.23   , installed 1.8.23

Objects and States
Please stand by - This may take a while
Objects:        5092
States:         3765

*** OS-Repositories and Updates ***
Hit:1 http://security.debian.org/debian-security bookworm-security InRelease
Hit:2 http://deb.debian.org/debian bookworm InRelease
Hit:3 http://deb.debian.org/debian bookworm-updates InRelease
Hit:4 http://archive.raspberrypi.org/debian bullseye InRelease
Hit:5 https://deb.nodesource.com/node_18.x nodistro InRelease
Reading package lists...
Pending Updates: 2

*** Listening Ports ***
Active Internet connections (only servers)
Proto Recv-Q Send-Q Local Address           Foreign Address         State       User       Inode      PID/Program name
tcp        0      0 0.0.0.0:1885            0.0.0.0:*               LISTEN      1001       16041      1339/io.sonoff.0
tcp        0      0 192.168.178.36:1883     0.0.0.0:*               LISTEN      1001       27594      2244/io.mqtt.0
tcp        0      0 127.0.0.1:9000          0.0.0.0:*               LISTEN      1001       1910       515/iobroker.js-con
tcp        0      0 127.0.0.1:9001          0.0.0.0:*               LISTEN      1001       15432      515/iobroker.js-con
tcp        0      0 192.168.178.36:1030     0.0.0.0:*               LISTEN      1001       20507      1578/io.sainlogic.0
tcp        0      0 192.168.178.36:42001    0.0.0.0:*               LISTEN      1001       15824      1176/io.hm-rpc.0
tcp        0      0 192.168.178.36:42010    0.0.0.0:*               LISTEN      1001       15196      1245/io.hm-rpc.1
tcp        0      0 0.0.0.0:22              0.0.0.0:*               LISTEN      0          13139      556/sshd: /usr/sbin
tcp6       0      0 :::8082                 :::*                    LISTEN      1001       20088      1615/io.web.0
tcp6       0      0 :::8081                 :::*                    LISTEN      1001       15762      1069/io.admin.0
tcp6       0      0 :::22                   :::*                    LISTEN      0          13159      556/sshd: /usr/sbin
udp        0      0 0.0.0.0:45737           0.0.0.0:*                           108        14282      378/avahi-daemon: r
udp        0      0 0.0.0.0:68              0.0.0.0:*                           0          15366      837/dhcpcd
udp        0      0 0.0.0.0:5353            0.0.0.0:*                           108        14280      378/avahi-daemon: r
udp6       0      0 :::45069                :::*                                108        14283      378/avahi-daemon: r
udp6       0      0 :::5353                 :::*                                108        14281      378/avahi-daemon: r
udp6       0      0 :::546                  :::*                                0          15377      837/dhcpcd

*** Log File - Last 25 Lines ***

2023-10-29 09:30:51.804  - info: mqtt.0 (2244) Client [WasserZaehler] subscribes on "mqtt.0.SmartHome.WasserZaehler..ctrl.flow_start"
2023-10-29 09:30:51.809  - debug: mqtt.0 (2244) Create folder object for mqtt.0.SmartHome.WasserZaehler.
2023-10-29 09:30:51.813  - info: mqtt.0 (2244) Can not create parent folder object: The id "mqtt.0.SmartHome.WasserZaehler." is invalid. Ids are not allowed to end in "."
2023-10-29 09:30:51.814  - debug: mqtt.0 (2244) stateChange mqtt.0.info.connection: {"val":"WasserZaehler","ack":true,"ts":1698568251800,"q":0,"from":"system.adapter.mqtt.0","user":"system.user.admin","lc":1698568251800}
2023-10-29 09:30:51.815  - info: mqtt.0 (2244) Client [WasserZaehler] subscribes on "mqtt.0.SmartHome.WasserZaehler..ctrl.set_prevalue"
2023-10-29 09:30:51.880  - debug: mqtt.0 (2244) stateChange mqtt.0.SmartHome.WasserZaehler..status: {"val":"Take Image","ack":true,"ts":1698568251873,"q":0,"from":"system.adapter.mqtt.0","user":"system.user.admin","lc":1698568251873}
2023-10-29 09:30:55.251  - debug: mqtt.0 (2244) stateChange mqtt.0.SmartHome.WasserZaehler..status: {"val":"Digitalization of ROIs","ack":true,"ts":1698568255248,"q":0,"from":"system.adapter.mqtt.0","user":"system.user.admin","lc":1698568255248}
2023-10-29 09:31:24.631  - debug: mqtt.0 (2244) stateChange mqtt.0.SmartHome.WasserZaehler..status: {"val":"Digitalization of ROIs","ack":true,"ts":1698568284627,"q":0,"from":"system.adapter.mqtt.0","user":"system.user.admin","lc":1698568255248}
2023-10-29 09:31:28.002  - debug: mqtt.0 (2244) stateChange mqtt.0.SmartHome.WasserZaehler..status: {"val":"Post-Processing","ack":true,"ts":1698568287998,"q":0,"from":"system.adapter.mqtt.0","user":"system.user.admin","lc":1698568287998}
2023-10-29 09:31:28.119  - debug: mqtt.0 (2244) stateChange mqtt.0.SmartHome.WasserZaehler..status: {"val":"Sending MQTT","ack":true,"ts":1698568288110,"q":0,"from":"system.adapter.mqtt.0","user":"system.user.admin","lc":1698568288110}
2023-10-29 09:31:28.137  - debug: mqtt.0 (2244) stateChange mqtt.0.SmartHome.WasserZaehler..connection: {"val":"connected","ack":true,"ts":1698568288133,"q":0,"from":"system.adapter.mqtt.0","user":"system.user.admin","lc":1698246095062}
2023-10-29 09:31:28.144  - debug: mqtt.0 (2244) stateChange mqtt.0.SmartHome.WasserZaehler..uptime: {"val":322279,"ack":true,"ts":1698568288134,"q":0,"from":"system.adapter.mqtt.0","user":"system.user.admin","lc":1698568288134}
2023-10-29 09:31:28.147  - debug: mqtt.0 (2244) stateChange mqtt.0.SmartHome.WasserZaehler..freeMem: {"val":795007,"ack":true,"ts":1698568288138,"q":0,"from":"system.adapter.mqtt.0","user":"system.user.admin","lc":1698568288138}
2023-10-29 09:31:28.184  - debug: mqtt.0 (2244) stateChange mqtt.0.SmartHome.WasserZaehler..wifiRSSI: {"val":-41,"ack":true,"ts":1698568288176,"q":0,"from":"system.adapter.mqtt.0","user":"system.user.admin","lc":1698568288176}
2023-10-29 09:31:28.187  - debug: mqtt.0 (2244) stateChange mqtt.0.SmartHome.WasserZaehler..CPUtemp: {"val":41,"ack":true,"ts":1698568288179,"q":0,"from":"system.adapter.mqtt.0","user":"system.user.admin","lc":1698568288179}
2023-10-29 09:31:28.196  - debug: mqtt.0 (2244) stateChange mqtt.0.SmartHome.WasserZaehler..main.value: {"val":234.3965,"ack":true,"ts":1698568288186,"q":0,"from":"system.adapter.mqtt.0","user":"system.user.admin","lc":1698566488196}
2023-10-29 09:31:28.197  - debug: mqtt.0 (2244) stateChange mqtt.0.SmartHome.WasserZaehler..main.error: {"val":"no error","ack":true,"ts":1698568288187,"q":0,"from":"system.adapter.mqtt.0","user":"system.user.admin","lc":1698514289245}
2023-10-29 09:31:28.204  - debug: mqtt.0 (2244) stateChange mqtt.0.SmartHome.WasserZaehler..main.rate: {"val":0,"ack":true,"ts":1698568288187,"q":0,"from":"system.adapter.mqtt.0","user":"system.user.admin","lc":1698568288187}
2023-10-29 09:31:28.214  - debug: mqtt.0 (2244) stateChange mqtt.0.SmartHome.WasserZaehler..main.rate_per_time_unit: {"val":0,"ack":true,"ts":1698568288191,"q":0,"from":"system.adapter.mqtt.0","user":"system.user.admin","lc":1698568288191}
2023-10-29 09:31:28.215  - debug: mqtt.0 (2244) stateChange mqtt.0.SmartHome.WasserZaehler..main.changeabsolut: {"val":0,"ack":true,"ts":1698568288199,"q":0,"from":"system.adapter.mqtt.0","user":"system.user.admin","lc":1698568288199}
2023-10-29 09:31:28.219  - debug: mqtt.0 (2244) stateChange mqtt.0.SmartHome.WasserZaehler..main.rate_per_digitalization_round: {"val":0,"ack":true,"ts":1698568288199,"q":0,"from":"system.adapter.mqtt.0","user":"system.user.admin","lc":1698568288199}
2023-10-29 09:31:28.220  - debug: mqtt.0 (2244) stateChange mqtt.0.SmartHome.WasserZaehler..main.raw: {"val":234.3965,"ack":true,"ts":1698568288199,"q":0,"from":"system.adapter.mqtt.0","user":"system.user.admin","lc":1698566488243}
2023-10-29 09:31:28.220  - debug: mqtt.0 (2244) stateChange mqtt.0.SmartHome.WasserZaehler..main.timestamp: {"val":"2023-10-29T09:30:38+0100","ack":true,"ts":1698568288201,"q":0,"from":"system.adapter.mqtt.0","user":"system.user.admin","lc":1698568288201}
2023-10-29 09:31:28.223  - debug: mqtt.0 (2244) stateChange mqtt.0.SmartHome.WasserZaehler..main.json: {"val":"  {\n    \"value\": \"234.3965\",\n    \"raw\": \"00234.3965\",\n    \"pre\": \"234.3965\",\n    \"error\": \"no error\",\n    \"rate\": \"0.000000\",\n    \"timestamp\": \"2023-10-29T09:30:38+0100\"\n  }\n","ack":true,"ts":1698568288201,"q":0,"from":"system.adapter.mqtt.0","user":"system.user.admin","lc":1698568288201}
2023-10-29 09:31:28.275  - debug: mqtt.0 (2244) stateChange mqtt.0.SmartHome.WasserZaehler..status: {"val":"Flow finished","ack":true,"ts":1698568288272,"q":0,"from":"system.adapter.mqtt.0","user":"system.user.admin","lc":1698568288272}

Thomas Braun

@raspiuser sagte in ioBroker stoppt und startet unbeabsichtigt:

Dieser Zustand läßt sich nur brutal mit 5V-raus-rein beenden.

Quatsch. Du killst die Kiste damit.
Schalt den Debug-Modus für den mqtt-Adapter aus.

Homoran

wenn nach
@raspiuser sagte in ioBroker stoppt und startet unbeabsichtigt:

up 15 min

bereits nur noch

@raspiuser sagte in ioBroker stoppt und startet unbeabsichtigt:

available
523M

existieren, hast du mit deinen 2GB RAM und 21 laufenden Instanzen wahrscheinlich das Ende der Fahnenstange erreicht.

dein

@raspiuser sagte in ioBroker stoppt und startet unbeabsichtigt:

vcan0-setup.service loaded failed failed Setup vcan0

läuft z.b. nicht.

Was hast du denn sonst noch an Speicherfressern am Start?

@raspiuser sagte in ioBroker stoppt und startet unbeabsichtigt:

Dieser Zustand läßt sich nur brutal mit 5V-raus-rein beenden.

und zerstört dein Dateisystem dermaßen, dass wir beim nächsten Fehler diesen nicht mehr zuordnen können.

RaspiUser

@homoran @Thomas-Braun

Danke für die erste Reaktion ...

mqtt-debug ist jetzt ausgeschaltet ... ich hatte da ein "Problemchen" ...
Das der Pi4 seitens Hardware an die Grenze kommt war schon klar, deshalb "alles neu" mit weniger Adaptern.
Der "Tankerkönig" benötigt, aus welchen Gründen auch immer, nach kurzer Zeit manchmal 350MB.
Ansonsten die Adapter, die im Log aufgeführt sind ... Die möchte ich auch behalten ...
Wenn der Raspi "normal" läuft wäre der nächste Schritt, den ioBroker in eine QNAP VM zu überführen.
In einem anderen Beitrag wurde empfohlen, den SWAP zu erhöhen ... was in anderen Beiträgen wieder als nicht-Ziel-führend beschrieben wurde ...
Das vcan0-Problem ist gerade hier angefragt ...

OK ... also jetzt abwarten und beim nächsten Absturz was tun ?
Oder: Wie stoppe ich den Raspi "legal"? Ich bekam nur das Lade-Symbol zu sehen. Über Putty ging auch nix ...

EDIT:
... schon wieder ...

... gibt es etwas anderes außer "Stecker ziehen" ?

Thomas Braun

@raspiuser sagte in ioBroker stoppt und startet unbeabsichtigt:

... gibt es etwas anderes außer "Stecker ziehen" ?

Abwarten. Der fängt sich.

RaspiUser

@thomas-braun sagte in ioBroker stoppt und startet unbeabsichtigt:

Abwarten. Der fängt sich.

... tatsächlich ... hat zwar ca. 15min gedauert aber er läuft wieder.
Kannst Du (ich sehe nix ...) den Grund des Absturz erkennen ?
(Wieder zu wenig RAM ? ... aber das habe ich zwischenzeitlich verstanden ... )


======== Start marking the full check here =========

Skript v.2023-10-10

*** BASE SYSTEM ***
 Static hostname: ioBroker-Raspi
       Icon name: computer
Operating System: Debian GNU/Linux 12 (bookworm)
          Kernel: Linux 6.1.21-v8+
    Architecture: arm64

Model           : Raspberry Pi 4 Model B Rev 1.1
Docker          : false
Virtualization  : none
Kernel          : aarch64
Userland        : arm64

Systemuptime and Load:
 09:49:01 up 1 day, 33 min,  2 users,  load average: 1.00, 16.80, 24.11
CPU threads: 4


*** RASPBERRY THROTTLING ***
Current issues:
No throttling issues detected.

Previously detected issues:
No throttling issues detected.

*** Time and Time Zones ***
               Local time: Thu 2023-11-02 09:49:01 CET
           Universal time: Thu 2023-11-02 08:49:01 UTC
                 RTC time: n/a
                Time zone: Europe/Berlin (CET, +0100)
System clock synchronized: yes
              NTP service: active
          RTC in local TZ: no

*** User and Groups ***
pi
/home/pi
pi adm dialout cdrom sudo audio video plugdev games users input render netdev gpio i2c spi iobroker

*** X-Server-Setup ***
X-Server:       false
Desktop:
Terminal:       tty
Boot Target:    multi-user.target

*** MEMORY ***
               total        used        free      shared  buff/cache   available
Mem:            1.9G        1.4G        403M        1.1M        247M        583M
Swap:           104M        6.2M         98M
Total:          2.0G        1.4G        502M

         1849 M total memory
         1292 M used memory
         1345 M active memory
            4 M inactive memory
          384 M free memory
           25 M buffer memory
          211 M swap cache
           99 M total swap
            5 M used swap
           94 M free swap

Raspberry only:
oom events: 0
lifetime oom required: 0 Mbytes
total time in oom handler: 0 ms
max time spent in oom handler: 0 ms

*** FAILED SERVICES ***

  UNIT LOAD ACTIVE SUB DESCRIPTION
0 loaded units listed.

*** FILESYSTEM ***
Filesystem     Type      Size  Used Avail Use% Mounted on
/dev/root      ext4       15G  4.4G  9.4G  32% /
devtmpfs       devtmpfs  667M     0  667M   0% /dev
tmpfs          tmpfs     925M     0  925M   0% /dev/shm
tmpfs          tmpfs     370M  1.2M  369M   1% /run
tmpfs          tmpfs     5.0M   16K  5.0M   1% /run/lock
/dev/mmcblk0p1 vfat      255M   31M  225M  13% /boot
tmpfs          tmpfs     185M     0  185M   0% /run/user/1000

Messages concerning ext4 filesystem in dmesg:
[Wed Nov  1 09:15:52 2023] Kernel command line: coherent_pool=1M 8250.nr_uarts=0 snd_bcm2835.enable_headphones=0 snd_bcm2835.enable_headphones=1 snd_bcm2835.enable_hdmi=1 snd_bcm2835.enable_hdmi=0  smsc95xx.macaddr=DC:A6:32:12:B4:C8 vc_mem.mem_base=0x3ec00000 vc_mem.mem_size=0x40000000  console=ttyS0,115200 console=tty1 root=PARTUUID=bc66e88d-02 rootfstype=ext4 fsck.repair=yes rootwait
[Wed Nov  1 09:15:53 2023] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Quota mode: none.
[Wed Nov  1 09:15:53 2023] VFS: Mounted root (ext4 filesystem) readonly on device 179:2.
[Wed Nov  1 09:15:56 2023] EXT4-fs (mmcblk0p2): re-mounted. Quota mode: none.

Show mounted filesystems \(real ones only\):
TARGET  SOURCE         FSTYPE OPTIONS
/       /dev/mmcblk0p2 ext4   rw,noatime
`-/boot /dev/mmcblk0p1 vfat   rw,relatime,fmask=0022,dmask=0022,codepage=437,iocharset=ascii,shortname=mixed,errors=remount-ro

Files in neuralgic directories:

/var:
1.3G    /var/
647M    /var/log
582M    /var/log/journal/ececfd62e7f741458cc0d2ea60d43f93
582M    /var/log/journal
328M    /var/cache

Archived and active journals take up 581.2M in the file system.

/opt/iobroker/backups:
4.0K    /opt/iobroker/backups/

/opt/iobroker/iobroker-data:
215M    /opt/iobroker/iobroker-data/
153M    /opt/iobroker/iobroker-data/files
52M     /opt/iobroker/iobroker-data/files/javascript.admin
43M     /opt/iobroker/iobroker-data/backup-objects
34M     /opt/iobroker/iobroker-data/files/javascript.admin/static

The five largest files in iobroker-data are:
21M     /opt/iobroker/iobroker-data/files/web.admin/static/js/main.edf7552a.js.map
13M     /opt/iobroker/iobroker-data/objects.jsonl
8.3M    /opt/iobroker/iobroker-data/files/web.admin/static/js/main.edf7552a.js
7.8M    /opt/iobroker/iobroker-data/states.jsonl
7.1M    /opt/iobroker/iobroker-data/files/javascript.admin/static/js/610.f22de4ab.chunk.js.map

USB-Devices by-id:
USB-Sticks -  Avoid direct links to /dev/* in your adapter setups, please always prefer the links 'by-id':

/dev/serial/by-id/usb-ITead_Sonoff_Zigbee_3.0_USB_Dongle_Plus_6edb8350b219ec11a0e039cc47486eb0-if00-port0

*** NodeJS-Installation ***

/usr/bin/nodejs         v18.18.2
/usr/bin/node           v18.18.2
/usr/bin/npm            9.8.1
/usr/bin/npx            9.8.1
/usr/bin/corepack       0.19.0


nodejs:
  Installed: 18.18.2-1nodesource1
  Candidate: 18.18.2-1nodesource1
  Version table:
 *** 18.18.2-1nodesource1 1001
        500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages
        100 /var/lib/dpkg/status
     18.18.1-1nodesource1 1001
        500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages
     18.18.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages
     18.17.1-1nodesource1 1001
        500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages
     18.17.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages
     18.16.1-1nodesource1 1001
        500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages
     18.16.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages
     18.15.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages
     18.14.2-1nodesource1 1001
        500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages
     18.14.1-1nodesource1 1001
        500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages
     18.14.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages
     18.13.0+dfsg1-1 500
        500 http://deb.debian.org/debian bookworm/main arm64 Packages
     18.13.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages
     18.12.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages
     18.11.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages
     18.10.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages
     18.9.1-1nodesource1 1001
        500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages
     18.9.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages
     18.8.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages
     18.7.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages
     18.6.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages
     18.5.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages
     18.4.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages
     18.3.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages
     18.2.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages
     18.1.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages
     18.0.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages

Temp directories causing npm8 problem: 0
No problems detected

Errors in npm tree:

*** ioBroker-Installation ***

ioBroker Status
iobroker is running on this host.


Objects type: jsonl
States  type: jsonl

Core adapters versions
js-controller:  5.0.12
admin:          6.12.0
javascript:     7.1.4

Adapters from github:   1

Adapter State
+ system.adapter.admin.0                  : admin                 : ioBroker-Raspi                           -  enabled, port: 8081, bind: 0.0.0.0, run as: admin
+ system.adapter.alpha-ess.0              : alpha-ess             : ioBroker-Raspi                           -  enabled
+ system.adapter.backitup.0               : backitup              : ioBroker-Raspi                           -  enabled
+ system.adapter.canbus.0                 : canbus                : ioBroker-Raspi                           -  enabled
  system.adapter.discovery.0              : discovery             : ioBroker-Raspi                           - disabled
  system.adapter.feiertage.0              : feiertage             : ioBroker-Raspi                           -  enabled
+ system.adapter.frontier_silicon.0       : frontier_silicon      : ioBroker-Raspi                           -  enabled
+ system.adapter.hm-rega.0                : hm-rega               : ioBroker-Raspi                           -  enabled
+ system.adapter.hm-rpc.0                 : hm-rpc                : ioBroker-Raspi                           -  enabled, port: 0
+ system.adapter.hm-rpc.1                 : hm-rpc                : ioBroker-Raspi                           -  enabled, port: 0
+ system.adapter.iqontrol.0               : iqontrol              : ioBroker-Raspi                           -  enabled
+ system.adapter.javascript.0             : javascript            : ioBroker-Raspi                           -  enabled
+ system.adapter.lgtv.0                   : lgtv                  : ioBroker-Raspi                           -  enabled
+ system.adapter.mqtt.0                   : mqtt                  : ioBroker-Raspi                           -  enabled, port: 1883, bind: 192.168.178.36
  system.adapter.onkyo.0                  : onkyo                 : ioBroker-Raspi                           - disabled
+ system.adapter.psa.0                    : psa                   : ioBroker-Raspi                           -  enabled
+ system.adapter.sainlogic.0              : sainlogic             : ioBroker-Raspi                           -  enabled, port: 1030, bind: 192.168.178.36
+ system.adapter.shuttercontrol.0         : shuttercontrol        : ioBroker-Raspi                           -  enabled
  system.adapter.simple-api.0             : simple-api            : ioBroker-Raspi                           - disabled, port: 8087, bind: 0.0.0.0, run as: admin
+ system.adapter.sonoff.0                 : sonoff                : ioBroker-Raspi                           -  enabled, port: 1885, bind: 0.0.0.0
+ system.adapter.tankerkoenig.0           : tankerkoenig          : ioBroker-Raspi                           -  enabled
+ system.adapter.telegram.0               : telegram              : ioBroker-Raspi                           -  enabled, port: 8443, bind: 0.0.0.0
+ system.adapter.tr-064.0                 : tr-064                : ioBroker-Raspi                           -  enabled
+ system.adapter.vw-connect.0             : vw-connect            : ioBroker-Raspi                           -  enabled
+ system.adapter.web.0                    : web                   : ioBroker-Raspi                           -  enabled, port: 8082, bind: 0.0.0.0, run as: admin
+ system.adapter.zigbee.0                 : zigbee                : ioBroker-Raspi                           -  enabled, port: /dev/ttyUSB0

+ instance is alive

Enabled adapters with bindings
+ system.adapter.admin.0                  : admin                 : ioBroker-Raspi                           -  enabled, port: 8081, bind: 0.0.0.0, run as: admin
+ system.adapter.hm-rpc.0                 : hm-rpc                : ioBroker-Raspi                           -  enabled, port: 0
+ system.adapter.hm-rpc.1                 : hm-rpc                : ioBroker-Raspi                           -  enabled, port: 0
+ system.adapter.mqtt.0                   : mqtt                  : ioBroker-Raspi                           -  enabled, port: 1883, bind: 192.168.178.36
+ system.adapter.sainlogic.0              : sainlogic             : ioBroker-Raspi                           -  enabled, port: 1030, bind: 192.168.178.36
+ system.adapter.sonoff.0                 : sonoff                : ioBroker-Raspi                           -  enabled, port: 1885, bind: 0.0.0.0
+ system.adapter.telegram.0               : telegram              : ioBroker-Raspi                           -  enabled, port: 8443, bind: 0.0.0.0
+ system.adapter.web.0                    : web                   : ioBroker-Raspi                           -  enabled, port: 8082, bind: 0.0.0.0, run as: admin
+ system.adapter.zigbee.0                 : zigbee                : ioBroker-Raspi                           -  enabled, port: /dev/ttyUSB0

ioBroker-Repositories
stable        : http://download.iobroker.net/sources-dist.json
beta          : http://download.iobroker.net/sources-dist-latest.json

Active repo(s): stable

Installed ioBroker-Instances
Used repository: stable
Adapter    "admin"        : 6.12.0   , installed 6.12.0
Adapter    "alpha-ess"    : 1.0.2    , installed 1.0.2
Adapter    "backitup"     : 2.8.7    , installed 2.8.1  [Updatable]
Adapter    "canbus"       : 1.3.1    , installed 1.3.1
Adapter    "discovery"    : 3.1.0    , installed 3.1.0
Adapter    "feiertage"    : 1.1.4    , installed 1.1.4
Adapter    "frontier_silicon": 0.1.1 , installed 0.1.1
Adapter    "hm-rega"      : 3.0.47   , installed 3.0.47
Adapter    "hm-rpc"       : 1.15.19  , installed 1.15.19
Adapter    "iqontrol"     : 2.3.0    , installed 2.3.0
Adapter    "javascript"   : 7.1.4    , installed 7.1.4
Controller "js-controller": 5.0.12   , installed 5.0.12
Adapter    "lgtv"         : 2.1.1    , installed 2.1.1
Adapter    "mqtt"         : 4.1.1    , installed 4.1.1
Adapter    "onkyo"        : 2.1.2    , installed 2.1.2
Adapter    "psa"          : 0.0.11   , installed 0.0.11
Adapter    "sainlogic"    : 0.10.5   , installed 0.10.5
Adapter    "shuttercontrol": 1.6.2   , installed 1.6.2
Adapter    "simple-api"   : 2.7.2    , installed 2.7.2
Adapter    "socketio"     : 6.5.5    , installed 6.5.5
Adapter    "sonoff"       : 2.5.3    , installed 2.5.3
Adapter    "tankerkoenig" : 3.3.7    , installed 3.3.7
Adapter    "telegram"     : 1.16.0   , installed 1.16.0
Adapter    "tr-064"       : 4.2.18   , installed 4.2.18
Adapter    "vw-connect"   : 0.0.67   , installed 0.2.0
Adapter    "web"          : 6.1.2    , installed 6.1.2
Adapter    "ws"           : 2.5.5    , installed 2.5.5
Adapter    "zigbee"       : 1.8.23   , installed 1.8.23

Objects and States
Please stand by - This may take a while
Objects:        5773
States:         4364

*** OS-Repositories and Updates ***
Hit:1 http://security.debian.org/debian-security bookworm-security InRelease
Hit:2 http://deb.debian.org/debian bookworm InRelease
Hit:3 http://deb.debian.org/debian bookworm-updates InRelease
Hit:4 http://archive.raspberrypi.org/debian bookworm InRelease
Hit:5 https://deb.nodesource.com/node_18.x nodistro InRelease
Reading package lists...
Pending Updates: 55

*** Listening Ports ***
Active Internet connections (only servers)
Proto Recv-Q Send-Q Local Address           Foreign Address         State       User       Inode      PID/Program name
tcp        0      0 0.0.0.0:22              0.0.0.0:*               LISTEN      0          13851      543/sshd: /usr/sbin
tcp        0      0 127.0.0.1:9000          0.0.0.0:*               LISTEN      1001       428961     7507/iobroker.js-co
tcp        0      0 127.0.0.1:9001          0.0.0.0:*               LISTEN      1001       430255     7507/iobroker.js-co
tcp        0      0 192.168.178.36:1883     0.0.0.0:*               LISTEN      1001       430408     7700/io.mqtt.0
tcp        0      0 192.168.178.36:1030     0.0.0.0:*               LISTEN      1001       432555     8067/io.sainlogic.0
tcp        0      0 192.168.178.36:42010    0.0.0.0:*               LISTEN      1001       431490     7789/io.hm-rpc.1
tcp        0      0 192.168.178.36:42001    0.0.0.0:*               LISTEN      1001       430426     7733/io.hm-rpc.0
tcp        0      0 0.0.0.0:1885            0.0.0.0:*               LISTEN      1001       430764     7871/io.sonoff.0
tcp6       0      0 :::22                   :::*                    LISTEN      0          13862      543/sshd: /usr/sbin
tcp6       0      0 :::8081                 :::*                    LISTEN      1001       429711     7640/io.admin.0
tcp6       0      0 :::8082                 :::*                    LISTEN      1001       433227     8097/io.web.0
udp        0      0 0.0.0.0:20000           0.0.0.0:*                           65534      1587       708/cannelloni
udp        0      0 0.0.0.0:49934           0.0.0.0:*                           108        11838      380/avahi-daemon: r
udp        0      0 0.0.0.0:68              0.0.0.0:*                           0          14020      844/dhcpcd
udp        0      0 0.0.0.0:5353            0.0.0.0:*                           108        11836      380/avahi-daemon: r
udp6       0      0 :::546                  :::*                                0          14033      844/dhcpcd
udp6       0      0 :::5353                 :::*                                108        11837      380/avahi-daemon: r
udp6       0      0 :::39321                :::*                                108        11839      380/avahi-daemon: r

*** Log File - Last 25 Lines ***

2023-11-02 09:46:58.713  - info: iqontrol.0 (8112) Creating Widget States...
2023-11-02 09:46:58.714  - info: iqontrol.0 (8112) Lists deactivated.
2023-11-02 09:46:58.715  - info: iqontrol.0 (8112) Deleting unused Objects...
2023-11-02 09:46:58.716  - info: iqontrol.0 (8112) Subscribing to states...
2023-11-02 09:46:58.719  - info: iqontrol.0 (8112) iQontrol ready.
2023-11-02 09:46:59.522  - info: host.ioBroker-Raspi instance system.adapter.vw-connect.0 started with pid 8127
2023-11-02 09:47:02.502  - info: vw-connect.0 (8127) starting. Version 0.2.0 (non-npm: ta2k/ioBroker.vw-connect) in /opt/iobroker/node_modules/iobroker.vw-connect, node: v18.18.2, js-controller: 5.0.12
2023-11-02 09:47:02.556  - info: vw-connect.0 (8127) Login in with vwv2
2023-11-02 09:47:04.995  - info: vw-connect.0 (8127) Login successful
2023-11-02 09:47:05.489  - info: vw-connect.0 (8127) {"mandatoryConsentInfo":[{"id":"termsOfUse","status":"VALID"}],"mandatoryFieldsStatus":true,"mbbIdStatus":true,"mbbUserId":"5qIgGpN2LkvdHc2H0TWDvtlwap51","missingMandatoryFields":[],"scopeId":"commonMandatoryFields","spinStatus":true,"ssoId":"de858a4a-f971-40f1-b375-baf01b331d2a"}
2023-11-02 09:47:05.748  - info: vw-connect.0 (8127) Found 1 vehicles
2023-11-02 09:47:41.431  - info: sonoff.0 (7871) Client [Steckdose-6-Kuehlkombi] connected with secret 1698914861421_288
2023-11-02 09:47:46.989  - info: sonoff.0 (7871) Client [Steckdose-1-Trockner] connected with secret 1698914866986_6241
2023-11-02 09:47:48.809  - info: sonoff.0 (7871) Client [Bodenlampen] connected with secret 1698914868808_4658
2023-11-02 09:47:49.620  - warn: zigbee.0 (7823) Device '0x0017880102a2b974' announced itself
2023-11-02 09:47:54.695  - info: sonoff.0 (7871) Client [Steckdose-2-Waschmaschine] connected with secret 1698914874694_3145
2023-11-02 09:47:59.110  - info: sonoff.0 (7871) Client [Smartmeter] connected with secret 1698914879107_367
2023-11-02 09:48:02.306  - info: sonoff.0 (7871) Client [Steckdose-4-OG-Medien] connected with secret 1698914882305_5112
2023-11-02 09:48:03.405  - warn: zigbee.0 (7823) Device '0x7cb03eaa0a03fb8a' announced itself
2023-11-02 09:48:03.407  - warn: zigbee.0 (7823) Device '0x7cb03eaa0a059b32' announced itself
2023-11-02 09:48:06.841  - info: sonoff.0 (7871) Client [Steckdose-3-Geschirrspueler] connected with secret 1698914886840_7258
2023-11-02 09:48:09.379  - info: sonoff.0 (7871) Client [Steckdose-5-EG-Medien] connected with secret 1698914889378_439
2023-11-02 09:48:09.594  - info: sonoff.0 (7871) Client [Steckdose-9] connected with secret 1698914889592_1177
2023-11-02 09:48:10.457  - info: sonoff.0 (7871) Client [Steckdose-7-Gefrierschrank] connected with secret 1698914890455_4919
2023-11-02 09:48:10.481  - info: sonoff.0 (7871) Client [Steckdose-8] connected with secret 1698914890479_891

============ Mark until here for C&P =============

iob diag has finished.

Thomas Braun

@raspiuser

load average: 1.00, 16.80, 24.11

Kein Wunder. Ab 4 ist die Kiste voll ausgelastet.
Da knallt irgendwas heftig rein.

Spiel die Updates ein!

sudo apt update
sudo apt full-upgrade
sudo reboot

Und auch den ioBroker auf Stand halten.

RaspiUser

@thomas-braun sagte in ioBroker stoppt und startet unbeabsichtigt:

Ab 4 ist die Kiste voll ausgelastet.

? ... meinst Du die Uhrzeit ?! Was sagt diese "load average" ?

@thomas-braun sagte in ioBroker stoppt und startet unbeabsichtigt:

irgendwas

... aber WAS sieht man scheinbar nicht ?

... ich mache alle 4 Wochen ...

sudo apt-get update
sudo apt-get upgrade

Thomas Braun

@raspiuser sagte in ioBroker stoppt und startet unbeabsichtigt:

Was sagt diese "load average" ?

Ein Wert von 1 wäre eine Auslastung von 100% (pro Kern). Da du auf der CPU vier Kerne hast ist ab 4 der Prozessor vollständig dicht.
Die Werte sind der Durchschnitt über 1, 5 und 15 Minuten. Kann man aber auch alles nachlesen.

Updates: Mach sie häufiger.

Thomas Braun

@raspiuser sagte in ioBroker stoppt und startet unbeabsichtigt:

... aber WAS sieht man scheinbar nicht ?

Sieht man in Tools wie 'top' oder 'htop'.

RaspiUser

@thomas-braun sagte in ioBroker stoppt und startet unbeabsichtigt:

Updates

... habe jetzt ein Update mit "deinen" Befehlen durchgeführt ... hat etwas gedauert, war wohl nötig ....

Ich habe jetzt auch (zufällig "gefunden") in deinen "LINUX-Werkzeugkaste" reingeschaut ... sehr interessant !!!

Thomas Braun

@raspiuser sagte in ioBroker stoppt und startet unbeabsichtigt:

habe jetzt ein Update mit "deinen" Befehlen durchgeführt

Das sind nicht 'meine Befehle ', das sind absolute Grundlagen.

RaspiUser

@thomas-braun sagte in ioBroker stoppt und startet unbeabsichtigt:

Das sind nicht 'meine Befehle '

... schon klar ... damit wollte ich nur zum Ausdruck bringen, dass ich "meine" Befehle nicht genutzt habe ...

RaspiUser

@thomas-braun sagte in ioBroker stoppt und startet unbeabsichtigt:

Sieht man in Tools wie 'top' oder 'htop'.

Sorry ... ich nerve weiter ...:
Ich habe jetzt im Terminal "top" bzw. "htop" ausgeführt ...
Auf was muss ich achten bzw. WAS knallt da rein ?

Thomas Braun

@raspiuser

Die Prozesse werden da angezeigt.

RaspiUser

@thomas-braun sagte in ioBroker stoppt und startet unbeabsichtigt:

Die Prozesse werden da angezeigt.

... aber wo muss ich bzgl. meinem Problem genauer hinschauen ... ? Welcher Wert ?

Tasks: 170 total,   1 running, 169 sleeping,   0 stopped,   0 zombie
%Cpu(s):  4.5 us,  0.7 sy,  0.0 ni, 94.4 id,  0.2 wa,  0.0 hi,  0.1 si,  0.0 st
MiB Mem :   1849.2 total,    169.9 free,   1346.7 used,    401.5 buff/cache
MiB Swap:    100.0 total,    100.0 free,      0.0 used.    502.5 avail Mem

    PID USER      PR  NI    VIRT    RES    SHR S  %CPU  %MEM     TIME+ COMMAND
   2735 iobroker  20   0 5198148 162752  44132 S   7.0   8.6   1:12.02 iobroker.js-con
   3053 iobroker  20   0  662620  72140  38296 S   3.3   3.8   0:05.25 io.sainlogic.0
   2809 iobroker  20   0  671776  80036  37112 S   2.6   4.2   0:05.13 io.mqtt.0
   2772 iobroker  20   0  998016 148360  37172 S   1.7   7.8   0:27.47 io.javascript.0
   2790 iobroker  20   0  807240  93184  43108 S   1.3   4.9   0:08.92 io.telegram.0
   3072 iobroker  20   0  924548  71424  37808 S   1.0   3.8   0:05.45 io.alpha-ess.0
   2828 iobroker  20   0  666680  76528  38384 S   0.7   4.0   0:05.90 io.hm-rpc.0
   2843 iobroker  20   0  670960  81628  37824 S   0.7   4.3   0:09.38 io.hm-rega.0
   3042 iobroker  20   0  665712  81488  42348 S   0.7   4.3   0:06.26 io.shuttercontr
   3117 iobroker  20   0 5128684  89056  39592 S   0.7   4.7   0:07.81 io.vw-connect.0

Thomas Braun

@raspiuser

%CPU oder %MEM sind erste Indikatoren. Man kann das auch danach sortieren. Jedenfalls bei htop.

NEWS

ioBroker stoppt und startet unbeabsichtigt

Support us

659
Online

32.0k
Users

80.5k
Topics

1.3m
Posts

NEWS

ioBroker stoppt und startet unbeabsichtigt

Support us

659Online

32.0kUsers

80.5kTopics

1.3mPosts

659
Online

32.0k
Users

80.5k
Topics

1.3m
Posts