Raspberry Pi 5 8Gb Iobroker Installation

[Homoran]

@teletapi da entpackt er gerade massiv

WARTEN!

hat da schon immer Meldungen gegeben, dass er sich aufgehängt hätte.

Mal sehen, wie lange der 5er da braucht

[teletapi]

@homoran Oh, da hätte ich jetzt nicht mit gerechnet das es so lange dauert, ich lass es mal wieder laufen

[Thomas Braun]

@teletapi

Hol dir ein Bier, geh 'ne Runde um den Block oder tu was andres, während die Kiste arbeitet.
'Abstürze' sehen in der Regel anders aus. Die haben nämlich keine Fortschrittsbalken. Hab jedenfalls noch keine 'Kernel Panic' mit einem gesehen...

[Albyricus]

@thomas-braun

Hi, ich hab auch Probleme mit einem Pi 4 8Gb.... kämpfe heute schon den ganzen tag mit einem Reinstall (genau das selbe Image)... hab glaub ich mittlerweile die 13ente installation durch... entweder bleibt er irgendwo hängen, oder ich bekomm nen npm err!...

    Welcome to the ioBroker installer!
    Installer version: 2023-10-13

    You might need to enter your password a couple of times.

==========================================================================


==========================================================================
    Installing prerequisites (1/4)
==========================================================================

Hit:1 http://deb.debian.org/debian bookworm InRelease
Hit:2 http://deb.debian.org/debian-security bookworm-security InRelease
Get:3 http://deb.debian.org/debian bookworm-updates InRelease [52.1 kB]
Hit:4 http://archive.raspberrypi.com/debian bookworm InRelease
Hit:5 https://deb.nodesource.com/node_18.x nodistro InRelease
Fetched 52.1 kB in 1s (38.0 kB/s)
Reading package lists... Done

==========================================================================
    Creating ioBroker user and directory (2/4)
==========================================================================

Created /etc/sudoers.d/iobroker
Directory /opt/iobroker created

==========================================================================
    Installing ioBroker (3/4)
==========================================================================

npm ERR! code ERR_SOCKET_TIMEOUT
npm ERR! network Socket timeout
npm ERR! network This is a problem related to network connectivity.
npm ERR! network In most cases you are behind a proxy or have bad network settings.
npm ERR! network
npm ERR! network If you are behind a proxy, please make sure that the
npm ERR! network 'proxy' config is set properly.  See: 'npm help config'

npm ERR! A complete log of this run can be found in: /home/brokerer/.npm/_logs/2023-11-08T21_13_39_035Z-debug-0.log

==========================================================================
    Finalizing installation (4/4)
==========================================================================

Enabling autostart...
Autostart enabled!
Fixing directory permissions...

==========================================================================

    ioBroker was installed successfully
    Open http://192.168.1.48:8081 in a browser and start configuring!

==========================================================================


You need to re-login before doing anything else on the console!

[Homoran]

@albyricus sagte in Raspberry Pi 5 8Gb Iobroker Installation:

genau das selbe Image

@thomas-braun sagte in Raspberry Pi 5 8Gb Iobroker Installation:

@teletapi

Hab das gerade mal auf meinem System nachgestellt. Hier hat es funktioniert.

hattest du auch das aktuelle RasPiOS gezogen?

[Albyricus]

@homoran

hi, ja ich habe gestern das Raspberry Pi OS Lite (64-bit) geholt. die erste Reinstall hat auch super funktioniert und ich hab mein iobroker aufgebaut... dann beim versuch auf Multihost völlig zerschossen und wollte heute nochmal bei 0 beginnen... tja und ab dann war der wurm drinnen

[Thomas Braun]

@albyricus

This is a problem related to network connectivity.

Musste mal nach dem Netzwerk schauen.

[Albyricus]

@thomas-braun

ich hab ein stinklangweiliges dsl50 mit fritzbox, ohne proxy, ohne pihole oder sonstige spielereien und der Pi hängt am gigabit lan kabel.... hab auch die Fritzbox schonmal neugestartet... mache gerade versuch nummer 14...

[teletapi]

@thomas-braun
Bin gerade wieder rein und das stand in der Konsole.
Ich mach jetzt nochmal neu.

Spoiler

pi@Raspberrypi5:~ $ curl -sLf https://iobroker.net/install.sh | bash -
library: loaded
Library version=2023-10-13

==========================================================================

Welcome to the ioBroker installer!
Installer version: 2023-10-13

You might need to enter your password a couple of times.

==========================================================================

==========================================================================
Installing prerequisites (1/4)

OK:1 http://deb.debian.org/debian bookworm InRelease
OK:2 http://deb.debian.org/debian-security bookworm-security InRelease
Holen:3 http://deb.debian.org/debian bookworm-updates InRelease [52,1 kB]
OK:4 http://archive.raspberrypi.com/debian bookworm InRelease
OK:5 https://deb.nodesource.com/node_18.x nodistro InRelease
Es wurden 52,1 kB in 1 s geholt (59,5 kB/s).
Paketlisten werden gelesen… Fertig

==========================================================================
Creating ioBroker user and directory (2/4)

Created /etc/sudoers.d/iobroker
Directory /opt/iobroker created

==========================================================================
Installing ioBroker (3/4)

npm ERR! code ERR_SOCKET_TIMEOUT
npm ERR! network Socket timeout
npm ERR! network This is a problem related to network connectivity.
npm ERR! network In most cases you are behind a proxy or have bad network settin gs.
npm ERR! network
npm ERR! network If you are behind a proxy, please make sure that the
npm ERR! network 'proxy' config is set properly. See: 'npm help config'

npm ERR! A complete log of this run can be found in: /home/pi/.npm/_logs/2023-11 -08T21_03_31_496Z-debug-0.log

==========================================================================
Finalizing installation (4/4)

Enabling autostart...
Created symlink /etc/systemd/system/multi-user.target.wants/iobroker.service → / lib/systemd/system/iobroker.service.
Autostart enabled!
Fixing directory permissions...

==========================================================================

ioBroker was installed successfully
Open http://192.168.178.121 192.168.178.122:8081 in a browser and start conf            iguring!

==========================================================================

You need to re-login before doing anything else on the console!

[Thomas Braun]

@teletapi sagte in Raspberry Pi 5 8Gb Iobroker Installation:

Ich mach jetzt nochmal neu.

Und warum sollte das Ergebnis bei sonst unverändertem Umfeld dann ein anderes sein?

[teletapi]

@thomas-braun
Weil ich die Fehlerquelle vorm Rechner vermute

[Thomas Braun]

@teletapi sagte in Raspberry Pi 5 8Gb Iobroker Installation:

/home/pi/.npm/_logs/2023-11 -08T21_03_31_496Z-debug-0.log

Schau in das angegebene Log rein. Vielleicht steht ja was verwertbares drin.

[teletapi]

@thomas-braun Mein Problem was den Log angeht das ich garnicht weiß wie ich den aufrufen soll, ich hab dann nochmals alles neu gemacht und nachdem immer wieder fehler autauchten immer erneut den Curl Befehl hinter einander laufen lassen nach dem 6-7 mal ging das dann plötzlich und es wurden keine fehler mehr angezeigt so scheint es im Augenblick zu funktionieren das Grundgerüst sollte jetzt stehen

Spoiler

======== Start marking the full check here =========

Skript v.2023-10-10

*** BASE SYSTEM ***
 Static hostname: Raspberrypi5
       Icon name: computer
Operating System: Debian GNU/Linux 12 (bookworm)
          Kernel: Linux 6.1.0-rpi6-rpi-2712
    Architecture: arm64

Model           : Raspberry Pi 5 Model B Rev 1.0
Docker          : false
Virtualization  : none
Kernel          : aarch64
Userland        : arm64

Systemuptime and Load:
 00:06:18 up 6 min,  2 users,  load average: 0.21, 0.25, 0.14
CPU threads: 4


*** RASPBERRY THROTTLING ***
Current issues:
No throttling issues detected.

Previously detected issues:
No throttling issues detected.

*** Time and Time Zones ***
               Local time: Thu 2023-11-09 00:06:18 CET
           Universal time: Wed 2023-11-08 23:06:18 UTC
                 RTC time: Wed 2023-11-08 23:06:18
                Time zone: Europe/Berlin (CET, +0100)
System clock synchronized: yes
              NTP service: active
          RTC in local TZ: no

*** User and Groups ***
pi
/home/pi
pi adm dialout cdrom sudo audio video plugdev games users input render netdev gpio i2c spi iobroker

*** X-Server-Setup ***
X-Server:       false
Desktop:
Terminal:       tty
Boot Target:    multi-user.target

*** MEMORY ***
               total        used        free      shared  buff/cache   available
Mem:            8.4G        547M        7.5G        5.3M        455M        7.9G
Swap:           104M          0B        104M
Total:          8.5G        547M        7.6G

         8053 M total memory
          522 M used memory
          456 M active memory
          259 M inactive memory
         7190 M free memory
           30 M buffer memory
          403 M swap cache
           99 M total swap
            0 M used swap
           99 M free swap

Raspberry only:
vc_gencmd_read_response returned -1
error=1 error_msg="Command not registered"

*** FAILED SERVICES ***

  UNIT LOAD ACTIVE SUB DESCRIPTION
0 loaded units listed.

*** FILESYSTEM ***
Filesystem     Type      Size  Used Avail Use% Mounted on
udev           devtmpfs  3.8G     0  3.8G   0% /dev
tmpfs          tmpfs     806M  5.0M  801M   1% /run
/dev/mmcblk0p2 ext4       59G  2.9G   53G   6% /
tmpfs          tmpfs     4.0G     0  4.0G   0% /dev/shm
tmpfs          tmpfs     5.0M   48K  5.0M   1% /run/lock
/dev/mmcblk0p1 vfat      510M   61M  450M  12% /boot/firmware
tmpfs          tmpfs     806M     0  806M   0% /run/user/1000

Messages concerning ext4 filesystem in dmesg:
[Wed Nov  8 23:59:32 2023] Kernel command line: coherent_pool=1M 8250.nr_uarts=1 pci=pcie_bus_safe snd_bcm2835.enable_compat_alsa=0 snd_bcm2835.enable_hdmi=1  smsc95xx.macaddr=D8:3A:DD:A3:25:8A vc_mem.mem_base=0x3fc00000 vc_mem.mem_size=0x40000000  console=ttyAMA10,115200 console=tty1 root=PARTUUID=beeda195-02 rootfstype=ext4 fsck.repair=yes rootwait cfg80211.ieee80211_regdom=DE
[Wed Nov  8 23:59:34 2023] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Quota mode: none.
[Wed Nov  8 23:59:36 2023] EXT4-fs (mmcblk0p2): re-mounted. Quota mode: none.

Show mounted filesystems \(real ones only\):
TARGET           SOURCE         FSTYPE OPTIONS
/                /dev/mmcblk0p2 ext4   rw,noatime
`-/boot/firmware /dev/mmcblk0p1 vfat   rw,relatime,fmask=0022,dmask=0022,codepage=437,iocharset=ascii,shortname=mixed,errors=remount-ro

Files in neuralgic directories:

/var:
496M    /var/
201M    /var/cache
195M    /var/cache/apt
163M    /var/lib
131M    /var/lib/apt/lists

Archived and active journals take up 32.0M in the file system.

/opt/iobroker/backups:
4.0K    /opt/iobroker/backups/

/opt/iobroker/iobroker-data:
19M     /opt/iobroker/iobroker-data/
15M     /opt/iobroker/iobroker-data/files
13M     /opt/iobroker/iobroker-data/files/admin.admin/custom/static/js
13M     /opt/iobroker/iobroker-data/files/admin.admin/custom/static
13M     /opt/iobroker/iobroker-data/files/admin.admin/custom

The five largest files in iobroker-data are:
6.3M    /opt/iobroker/iobroker-data/files/admin.admin/custom/static/js/vendors-node_modules_iobroker_adapter-react-v5_assets_devices_parseNames_js-node_modules_iobr-99c23e.847b8ad9.chunk.js.map
3.9M    /opt/iobroker/iobroker-data/objects.jsonl
2.8M    /opt/iobroker/iobroker-data/files/admin.admin/custom/static/js/vendors-node_modules_iobroker_adapter-react-v5_assets_devices_parseNames_js-node_modules_iobr-99c23e.847b8ad9.chunk.js
1.6M    /opt/iobroker/iobroker-data/files/admin.admin/custom/static/js/vendors-node_modules_mui_material_Accordion_index_js-node_modules_mui_material_AccordionDetai-57e02d.0886b730.chunk.js.map
652K    /opt/iobroker/iobroker-data/files/admin.admin/custom/static/js/vendors-node_modules_mui_material_index_js.40e01f69.chunk.js.map

USB-Devices by-id:
USB-Sticks -  Avoid direct links to /dev/* in your adapter setups, please always prefer the links 'by-id':

find: '/dev/serial/by-id/': No such file or directory

*** NodeJS-Installation ***

/usr/bin/nodejs         v18.18.2
/usr/bin/node           v18.18.2
/usr/bin/npm            9.8.1
/usr/bin/npx            9.8.1
/usr/bin/corepack       0.19.0


nodejs:
  Installed: 18.18.2-1nodesource1
  Candidate: 18.18.2-1nodesource1
  Version table:
 *** 18.18.2-1nodesource1 500
        500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages
        100 /var/lib/dpkg/status
     18.18.1-1nodesource1 500
        500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages
     18.18.0-1nodesource1 500
        500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages
     18.17.1-1nodesource1 500
        500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages
     18.17.0-1nodesource1 500
        500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages
     18.16.1-1nodesource1 500
        500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages
     18.16.0-1nodesource1 500
        500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages
     18.15.0-1nodesource1 500
        500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages
     18.14.2-1nodesource1 500
        500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages
     18.14.1-1nodesource1 500
        500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages
     18.14.0-1nodesource1 500
        500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages
     18.13.0+dfsg1-1 500
        500 http://deb.debian.org/debian bookworm/main arm64 Packages
     18.13.0-1nodesource1 500
        500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages
     18.12.0-1nodesource1 500
        500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages
     18.11.0-1nodesource1 500
        500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages
     18.10.0-1nodesource1 500
        500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages
     18.9.1-1nodesource1 500
        500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages
     18.9.0-1nodesource1 500
        500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages
     18.8.0-1nodesource1 500
        500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages
     18.7.0-1nodesource1 500
        500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages
     18.6.0-1nodesource1 500
        500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages
     18.5.0-1nodesource1 500
        500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages
     18.4.0-1nodesource1 500
        500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages
     18.3.0-1nodesource1 500
        500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages
     18.2.0-1nodesource1 500
        500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages
     18.1.0-1nodesource1 500
        500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages
     18.0.0-1nodesource1 500
        500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages

Temp directories causing npm8 problem: 0
No problems detected

Errors in npm tree:

*** ioBroker-Installation ***

ioBroker Status
iobroker is running on this host.


Objects type: jsonl
States  type: jsonl

Core adapters versions
js-controller:  5.0.12
admin:          6.12.0
javascript:     "javascript" not found

Adapters from github:   0

Adapter State
+ system.adapter.admin.0                  : admin                 : Raspberrypi5                             -  enabled, port: 8081, bind: 0.0.0.0, run as: admin
+ system.adapter.backitup.0               : backitup              : Raspberrypi5                             -  enabled
+ system.adapter.discovery.0              : discovery             : Raspberrypi5                             -  enabled

+ instance is alive

Enabled adapters with bindings
+ system.adapter.admin.0                  : admin                 : Raspberrypi5                             -  enabled, port: 8081, bind: 0.0.0.0, run as: admin

ioBroker-Repositories
stable        : http://download.iobroker.net/sources-dist.json
beta          : http://download.iobroker.net/sources-dist-latest.json

Active repo(s): stable

Installed ioBroker-Instances
Used repository: stable
Adapter    "admin"        : 6.12.0   , installed 6.12.0
Adapter    "backitup"     : 2.8.7    , installed 2.8.7
Adapter    "discovery"    : 3.1.0    , installed 3.1.0
Controller "js-controller": 5.0.12   , installed 5.0.12

Objects and States
Please stand by - This may take a while
Objects:        144
States:         103

*** OS-Repositories and Updates ***
Hit:1 http://deb.debian.org/debian bookworm InRelease
Hit:2 http://deb.debian.org/debian-security bookworm-security InRelease
Hit:3 http://deb.debian.org/debian bookworm-updates InRelease
Hit:4 http://archive.raspberrypi.com/debian bookworm InRelease
Hit:5 https://deb.nodesource.com/node_18.x nodistro InRelease
Reading package lists...
Pending Updates: 0

*** Listening Ports ***
Active Internet connections (only servers)
Proto Recv-Q Send-Q Local Address           Foreign Address         State       User       Inode      PID/Program name
tcp        0      0 127.0.0.1:9001          0.0.0.0:*               LISTEN      1001       16053      774/iobroker.js-con
tcp        0      0 127.0.0.1:9000          0.0.0.0:*               LISTEN      1001       16060      774/iobroker.js-con
tcp        0      0 0.0.0.0:22              0.0.0.0:*               LISTEN      0          13986      792/sshd: /usr/sbin
tcp6       0      0 :::8081                 :::*                    LISTEN      1001       14223      1098/io.admin.0
tcp6       0      0 :::22                   :::*                    LISTEN      0          13988      792/sshd: /usr/sbin
udp        0      0 0.0.0.0:5353            0.0.0.0:*                           104        13828      669/avahi-daemon: r
udp        0      0 0.0.0.0:59718           0.0.0.0:*                           104        13830      669/avahi-daemon: r
udp6       0      0 fe80::f05b:9255:16f:546 :::*                                0          16717      746/NetworkManager
udp6       0      0 fe80::6e03:de62:d22:546 :::*                                0          16706      746/NetworkManager
udp6       0      0 :::5353                 :::*                                104        13829      669/avahi-daemon: r
udp6       0      0 :::60759                :::*                                104        13831      669/avahi-daemon: r

*** Log File - Last 25 Lines ***

2023-11-09 00:04:39.099  - info: host.Raspberrypi5 stopInstance system.adapter.admin.0 (force=false, process=true)
2023-11-09 00:04:39.103  - info: admin.0 (831) Got terminate signal TERMINATE_YOURSELF
2023-11-09 00:04:39.105  - info: admin.0 (831) terminating http server on port 8081
2023-11-09 00:04:39.107  - info: admin.0 (831) terminating
2023-11-09 00:04:39.107  - info: admin.0 (831) Terminated (ADAPTER_REQUESTED_TERMINATION): Without reason
2023-11-09 00:04:39.143  - info: host.Raspberrypi5 stopInstance system.adapter.admin.0 send kill signal
2023-11-09 00:04:39.609  - info: admin.0 (831) terminating
2023-11-09 00:04:39.666  - info: host.Raspberrypi5 instance system.adapter.admin.0 terminated with code 11 (ADAPTER_REQUESTED_TERMINATION)
2023-11-09 00:04:42.105  - info: host.Raspberrypi5 [WEBSERVER_UPGRADE] (admin) Server is running on http://localhost:8081
2023-11-09 00:04:48.188  - info: host.Raspberrypi5 [WEBSERVER_UPGRADE] (admin) Successfully upgraded admin to version 6.12.0
2023-11-09 00:04:48.793  - info: host.Raspberrypi5 [WEBSERVER_UPGRADE] (admin) Final information delivered
2023-11-09 00:04:48.798  - info: host.Raspberrypi5 "system.adapter.admin.0" enabled
2023-11-09 00:04:48.799  - info: host.Raspberrypi5 [WEBSERVER_UPGRADE] (admin) Successfully started adapter
2023-11-09 00:04:48.866  - info: host.Raspberrypi5 instance system.adapter.admin.0 started with pid 1098
2023-11-09 00:04:49.715  - info: admin.0 (1098) starting. Version 6.12.0 in /opt/iobroker/node_modules/iobroker.admin, node: v18.18.2, js-controller: 5.0.12
2023-11-09 00:04:49.745  - info: admin.0 (1098) requesting all objects
2023-11-09 00:04:50.037  - info: admin.0 (1098) received all objects
2023-11-09 00:04:50.169  - info: admin.0 (1098) socket.io server listening on port 8081
2023-11-09 00:04:50.170  - info: admin.0 (1098) http server listening on port 8081
2023-11-09 00:04:50.170  - info: admin.0 (1098) Use link "http://127.0.0.1:8081" to configure.
2023-11-09 00:04:52.193  - info: admin.0 (1098) ==> Connected system.user.admin from ::ffff:192.168.178.63
2023-11-09 00:04:52.941  - info: admin.0 (1098) <== Disconnect system.user.admin from ::ffff:192.168.178.63 admin
2023-11-09 00:04:53.345  - info: admin.0 (1098) ==> Connected system.user.admin from ::ffff:192.168.178.63
2023-11-09 00:04:53.350  - info: admin.0 (1098) <== Disconnect system.user.admin from ::ffff:192.168.178.63 admin
2023-11-09 00:04:54.756  - info: admin.0 (1098) ==> Connected system.user.admin from ::ffff:192.168.178.63

============ Mark until here for C&P =============

iob diag has finished.

[Thomas Braun]

@teletapi

Mit einem pager wie z. B.

less /home/pi/.npm/_logs/2023-11 -08T21_03_31_496Z-debug-0.log

[hg6806]

@thomas-braun

Ich habe seit gestern auf einen Pi5 und das gleiche Problem.
Das Log-File ist zu groß zu posten, deshalb habe ich es angehängt.
2023-11-09T17_43_57_638Z-debug-0.log

[Thomas Braun]

@hg6806

Der Hase liegt dort im Pfeffer:

2229 verbose stack FetchError: Invalid response body while trying to fetch https://registry.npmjs.org/@iobroker%2fdb-states-file: Socket timeout
2229 verbose stack     at /usr/lib/node_modules/npm/node_modules/minipass-fetch/lib/body.js:170:15
2229 verbose stack     at process.processTicksAndRejections (node:internal/process/task_queues:95:5)
2229 verbose stack     at async Response.json (/usr/lib/node_modules/npm/node_modules/minipass-fetch/lib/body.js:75:17)
2229 verbose stack     at async RegistryFetcher.packument (/usr/lib/node_modules/npm/node_modules/pacote/lib/registry.js:94:25)
2229 verbose stack     at async RegistryFetcher.manifest (/usr/lib/node_modules/npm/node_modules/pacote/lib/registry.js:118:23)
2229 verbose stack     at async Promise.all (index 43)
2229 verbose stack     at async #buildDepStep (/usr/lib/node_modules/npm/node_modules/@npmcli/arborist/lib/arborist/build-ideal-tree.js:1034:5)
2229 verbose stack     at async Arborist.buildIdealTree (/usr/lib/node_modules/npm/node_modules/@npmcli/arborist/lib/arborist/build-ideal-tree.js:196:7)
2229 verbose stack     at async Promise.all (index 1)
2229 verbose stack     at async Arborist.reify (/usr/lib/node_modules/npm/node_modules/@npmcli/arborist/lib/arborist/reify.js:159:5)
2230 verbose cwd /opt/iobroker
2231 verbose Linux 6.1.0-rpi4-rpi-2712
2232 verbose node v18.18.2
2233 verbose npm  v9.8.1
2234 error code ERR_SOCKET_TIMEOUT
2235 error errno ERR_SOCKET_TIMEOUT
2236 error network Invalid response body while trying to fetch https://registry.npmjs.org/@iobroker%2fdb-states-file: Socket timeout
2237 error network This is a problem related to network connectivity.
2237 error network In most cases you are behind a proxy or have bad network settings.
2237 error network
2237 error network If you are behind a proxy, please make sure that the
2237 error network 'proxy' config is set properly.  See: 'npm help config'
2238 verbose exit 1

Warum es an der Stelle hakt, bei den anderen Modulen aber nicht kann ich dir nicht sagen.

[hg6806]

@thomas-braun

Ok
Da es ja nach mehrfachen Versuchen bei @teletapi geklappt hat, liegt es doch nahe, dass das Timeout der ersten Zeile vielleicht nur höher gesetzt werden muss?

@teletapi Läuft bei dir ioBroker nun auf dem Pi5?

[Marc Berg]

Wenn man das hier so liest, könnte man glauben, dass der Pi 5 grundsätzliche Netzwerkprobleme hat, oder?

Drei Leute mit ähnlichen Konnektivitätsfehlern ...

[hg6806]

Bei mir läuft es jetzt auch.
Nach dem 3. Installationsversuch.

[teletapi]

@hg6806 Ja läuft ist zwar noch nicht produktiv im Einsatz aber läuft

Spoiler

======== Start marking the full check here =========

Skript v.2023-10-10

*** BASE SYSTEM ***
 Static hostname: Raspberrypi5
       Icon name: computer
Operating System: Debian GNU/Linux 12 (bookworm)
          Kernel: Linux 6.1.0-rpi6-rpi-2712
    Architecture: arm64

Model           : Raspberry Pi 5 Model B Rev 1.0
Docker          : false
Virtualization  : none
Kernel          : aarch64
Userland        : arm64

Systemuptime and Load:
 00:31:49 up 24 min,  2 users,  load average: 0.61, 0.37, 0.25
CPU threads: 4


*** RASPBERRY THROTTLING ***
Current issues:
No throttling issues detected.

Previously detected issues:
No throttling issues detected.

*** Time and Time Zones ***
               Local time: Sat 2023-11-11 00:31:49 CET
           Universal time: Fri 2023-11-10 23:31:49 UTC
                 RTC time: Fri 2023-11-10 23:31:49
                Time zone: Europe/Berlin (CET, +0100)
System clock synchronized: yes
              NTP service: active
          RTC in local TZ: no

*** User and Groups ***
pi
/home/pi
pi adm dialout cdrom sudo audio video plugdev games users input render netdev gpio i2c spi iobroker

*** X-Server-Setup ***
X-Server:       false
Desktop:
Terminal:       tty
Boot Target:    multi-user.target

*** MEMORY ***
               total        used        free      shared  buff/cache   available
Mem:            8.4G        2.9G        4.3G        5.3M        1.4G        5.6G
Swap:           104M          0B        104M
Total:          8.5G        2.9G        4.4G

         8053 M total memory
         2721 M used memory
         2616 M active memory
          887 M inactive memory
         4120 M free memory
           75 M buffer memory
         1237 M swap cache
           99 M total swap
            0 M used swap
           99 M free swap

Raspberry only:
vc_gencmd_read_response returned -1
error=1 error_msg="Command not registered"

*** FAILED SERVICES ***

  UNIT LOAD ACTIVE SUB DESCRIPTION
0 loaded units listed.

*** FILESYSTEM ***
Filesystem     Type      Size  Used Avail Use% Mounted on
udev           devtmpfs  3.8G     0  3.8G   0% /dev
tmpfs          tmpfs     806M  5.1M  801M   1% /run
/dev/mmcblk0p2 ext4       59G  5.4G   50G  10% /
tmpfs          tmpfs     4.0G     0  4.0G   0% /dev/shm
tmpfs          tmpfs     5.0M   48K  5.0M   1% /run/lock
/dev/mmcblk0p1 vfat      510M   61M  450M  12% /boot/firmware
tmpfs          tmpfs     806M     0  806M   0% /run/user/1000

Messages concerning ext4 filesystem in dmesg:
[Sat Nov 11 00:07:42 2023] Kernel command line: coherent_pool=1M 8250.nr_uarts=1 pci=pcie_bus_safe snd_bcm2835.enable_compat_alsa=0 snd_bcm2835.enable_hdmi=1  smsc95xx.macaddr=D8:3A:DD:A3:25:8A vc_mem.mem_base=0x3fc00000 vc_mem.mem_size=0x40000000  console=ttyAMA10,115200 console=tty1 root=PARTUUID=beeda195-02 rootfstype=ext4 fsck.repair=yes rootwait cfg80211.ieee80211_regdom=DE
[Sat Nov 11 00:07:44 2023] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Quota mode: none.
[Sat Nov 11 00:07:46 2023] EXT4-fs (mmcblk0p2): re-mounted. Quota mode: none.

Show mounted filesystems \(real ones only\):
TARGET           SOURCE         FSTYPE OPTIONS
/                /dev/mmcblk0p2 ext4   rw,noatime
`-/boot/firmware /dev/mmcblk0p1 vfat   rw,relatime,fmask=0022,dmask=0022,codepage=437,iocharset=ascii,shortname=mixed,errors=remount-ro

Files in neuralgic directories:

/var:
939M    /var/
542M    /var/lib
361M    /var/lib/influxdb/engine/data/2a3f1759f802b32d/autogen
361M    /var/lib/influxdb/engine/data/2a3f1759f802b32d
361M    /var/lib/influxdb/engine/data

Archived and active journals take up 80.0M in the file system.

/opt/iobroker/backups:
447M    /opt/iobroker/backups/

/opt/iobroker/iobroker-data:
302M    /opt/iobroker/iobroker-data/
220M    /opt/iobroker/iobroker-data/files
67M     /opt/iobroker/iobroker-data/files/javascript.admin
62M     /opt/iobroker/iobroker-data/node-red.0
61M     /opt/iobroker/iobroker-data/node-red.0/node_modules

The five largest files in iobroker-data are:
33M     /opt/iobroker/iobroker-data/files/iot.admin/static/js/main.1797d034.js.map
22M     /opt/iobroker/iobroker-data/files/modbus.admin/static/js/main.b5f6766c.js.map
21M     /opt/iobroker/iobroker-data/files/web.admin/static/js/main.aaea95f8.js.map
14M     /opt/iobroker/iobroker-data/objects.jsonl
8.9M    /opt/iobroker/iobroker-data/files/modbus.admin/static/js/main.b5f6766c.js

USB-Devices by-id:
USB-Sticks -  Avoid direct links to /dev/* in your adapter setups, please always prefer the links 'by-id':

find: '/dev/serial/by-id/': No such file or directory

*** NodeJS-Installation ***

/usr/bin/nodejs         v18.18.2
/usr/bin/node           v18.18.2
/usr/bin/npm            9.8.1
/usr/bin/npx            9.8.1
/usr/bin/corepack       0.19.0


nodejs:
  Installed: 18.18.2-1nodesource1
  Candidate: 18.18.2-1nodesource1
  Version table:
 *** 18.18.2-1nodesource1 500
        500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages
        100 /var/lib/dpkg/status
     18.18.1-1nodesource1 500
        500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages
     18.18.0-1nodesource1 500
        500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages
     18.17.1-1nodesource1 500
        500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages
     18.17.0-1nodesource1 500
        500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages
     18.16.1-1nodesource1 500
        500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages
     18.16.0-1nodesource1 500
        500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages
     18.15.0-1nodesource1 500
        500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages
     18.14.2-1nodesource1 500
        500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages
     18.14.1-1nodesource1 500
        500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages
     18.14.0-1nodesource1 500
        500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages
     18.13.0+dfsg1-1 500
        500 http://deb.debian.org/debian bookworm/main arm64 Packages
     18.13.0-1nodesource1 500
        500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages
     18.12.0-1nodesource1 500
        500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages
     18.11.0-1nodesource1 500
        500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages
     18.10.0-1nodesource1 500
        500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages
     18.9.1-1nodesource1 500
        500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages
     18.9.0-1nodesource1 500
        500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages
     18.8.0-1nodesource1 500
        500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages
     18.7.0-1nodesource1 500
        500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages
     18.6.0-1nodesource1 500
        500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages
     18.5.0-1nodesource1 500
        500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages
     18.4.0-1nodesource1 500
        500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages
     18.3.0-1nodesource1 500
        500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages
     18.2.0-1nodesource1 500
        500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages
     18.1.0-1nodesource1 500
        500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages
     18.0.0-1nodesource1 500
        500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages

Temp directories causing npm8 problem: 0
No problems detected

Errors in npm tree:

*** ioBroker-Installation ***

ioBroker Status
iobroker is running on this host.


Objects type: jsonl
States  type: jsonl

Core adapters versions
js-controller:  5.0.16
admin:          6.12.2
javascript:     7.1.6

Adapters from github:   2

Adapter State
+ system.adapter.admin.0                  : admin                 : Raspberrypi5                             -  enabled, port: 8081, bind: 0.0.0.0, run as: admin
+ system.adapter.alexa2.0                 : alexa2                : Raspberrypi5                             -  enabled
  system.adapter.alias-manager.0          : alias-manager         : Raspberrypi5                             - disabled
+ system.adapter.backitup.0               : backitup              : Raspberrypi5                             -  enabled
+ system.adapter.cloud.0                  : cloud                 : Raspberrypi5                             -  enabled
+ system.adapter.discovery.0              : discovery             : Raspberrypi5                             -  enabled
  system.adapter.energiefluss-erweitert.0 : energiefluss-erweitert: Raspberrypi5                             - disabled
+ system.adapter.fritzdect.0              : fritzdect             : Raspberrypi5                             -  enabled
+ system.adapter.hm-rega.0                : hm-rega               : Raspberrypi5                             -  enabled
+ system.adapter.hm-rpc.0                 : hm-rpc                : Raspberrypi5                             -  enabled, port: 18701
+ system.adapter.hm-rpc.1                 : hm-rpc                : Raspberrypi5                             -  enabled, port: 12001
+ system.adapter.hm-rpc.2                 : hm-rpc                : Raspberrypi5                             -  enabled, port: 12010
+ system.adapter.hm-rpc.3                 : hm-rpc                : Raspberrypi5                             -  enabled, port: 0
+ system.adapter.hue-extended.0           : hue-extended          : Raspberrypi5                             -  enabled
  system.adapter.ical.0                   : ical                  : Raspberrypi5                             -  enabled
+ system.adapter.influxdb.0               : influxdb              : Raspberrypi5                             -  enabled, port: 8086
+ system.adapter.info.0                   : info                  : Raspberrypi5                             -  enabled
+ system.adapter.iot.0                    : iot                   : Raspberrypi5                             -  enabled
+ system.adapter.jarvis.0                 : jarvis                : Raspberrypi5                             -  enabled
+ system.adapter.javascript.0             : javascript            : Raspberrypi5                             -  enabled
  system.adapter.modbus.0                 : modbus                : Raspberrypi5                             - disabled
+ system.adapter.mqtt.0                   : mqtt                  : Raspberrypi5                             -  enabled, port: 1883, bind: 0.0.0.0
+ system.adapter.net-tools.0              : net-tools             : Raspberrypi5                             -  enabled
+ system.adapter.node-red.0               : node-red              : Raspberrypi5                             -  enabled, port: 1880, bind: 0.0.0.0
+ system.adapter.nuki.0                   : nuki                  : Raspberrypi5                             -  enabled
+ system.adapter.opendtu.0                : opendtu               : Raspberrypi5                             -  enabled
+ system.adapter.panasonic-viera.0        : panasonic-viera       : Raspberrypi5                             -  enabled
+ system.adapter.ping.0                   : ping                  : Raspberrypi5                             -  enabled
+ system.adapter.rpi2.0                   : rpi2                  : Raspberrypi5                             -  enabled
+ system.adapter.shelly.0                 : shelly                : Raspberrypi5                             -  enabled, port: 1882, bind: 0.0.0.0
+ system.adapter.simple-api.0             : simple-api            : Raspberrypi5                             -  enabled, port: 8087, bind: 192.168.178.82, run as: admin
  system.adapter.smartmeter.0             : smartmeter            : Raspberrypi5                             - disabled
  system.adapter.smartmeter.1             : smartmeter            : Raspberrypi5                             - disabled
+ system.adapter.socketio.0               : socketio              : Raspberrypi5                             -  enabled, port: 8084, bind: 0.0.0.0, run as: admin
+ system.adapter.sonoff.0                 : sonoff                : Raspberrypi5                             -  enabled, port: 1886, bind: 0.0.0.0
+ system.adapter.telegram.0               : telegram              : Raspberrypi5                             -  enabled, port: 8443, bind: 0.0.0.0
+ system.adapter.tr-064.0                 : tr-064                : Raspberrypi5                             -  enabled
+ system.adapter.web.0                    : web                   : Raspberrypi5                             -  enabled, port: 8082, bind: 0.0.0.0, run as: admin

+ instance is alive

Enabled adapters with bindings
+ system.adapter.admin.0                  : admin                 : Raspberrypi5                             -  enabled, port: 8081, bind: 0.0.0.0, run as: admin
+ system.adapter.hm-rpc.0                 : hm-rpc                : Raspberrypi5                             -  enabled, port: 18701
+ system.adapter.hm-rpc.1                 : hm-rpc                : Raspberrypi5                             -  enabled, port: 12001
+ system.adapter.hm-rpc.2                 : hm-rpc                : Raspberrypi5                             -  enabled, port: 12010
+ system.adapter.hm-rpc.3                 : hm-rpc                : Raspberrypi5                             -  enabled, port: 0
+ system.adapter.influxdb.0               : influxdb              : Raspberrypi5                             -  enabled, port: 8086
+ system.adapter.mqtt.0                   : mqtt                  : Raspberrypi5                             -  enabled, port: 1883, bind: 0.0.0.0
+ system.adapter.node-red.0               : node-red              : Raspberrypi5                             -  enabled, port: 1880, bind: 0.0.0.0
+ system.adapter.shelly.0                 : shelly                : Raspberrypi5                             -  enabled, port: 1882, bind: 0.0.0.0
+ system.adapter.simple-api.0             : simple-api            : Raspberrypi5                             -  enabled, port: 8087, bind: 192.168.178.82, run as: admin
+ system.adapter.socketio.0               : socketio              : Raspberrypi5                             -  enabled, port: 8084, bind: 0.0.0.0, run as: admin
+ system.adapter.sonoff.0                 : sonoff                : Raspberrypi5                             -  enabled, port: 1886, bind: 0.0.0.0
+ system.adapter.telegram.0               : telegram              : Raspberrypi5                             -  enabled, port: 8443, bind: 0.0.0.0
+ system.adapter.web.0                    : web                   : Raspberrypi5                             -  enabled, port: 8082, bind: 0.0.0.0, run as: admin

ioBroker-Repositories
stable        : http://download.iobroker.net/sources-dist.json
beta          : http://download.iobroker.net/sources-dist-latest.json

Active repo(s): beta

Installed ioBroker-Instances
Used repository: beta
Adapter    "admin"        : 6.12.2   , installed 6.12.2
Adapter    "alexa2"       : 3.26.1   , installed 3.26.1
Adapter    "alias-manager": 1.2.6    , installed 1.2.6
Adapter    "backitup"     : 2.9.1    , installed 2.9.1
Adapter    "cloud"        : 4.4.1    , installed 4.4.1
Adapter    "discovery"    : 4.2.0    , installed 4.2.0
Adapter    "fritzdect"    : 2.5.8    , installed 2.5.8
Adapter    "hm-rega"      : 4.0.0    , installed 4.0.0
Adapter    "hm-rpc"       : 1.15.19  , installed 1.15.19
Adapter    "hue-extended" : 2.0.0    , installed 2.0.0
Adapter    "ical"         : 1.13.3   , installed 1.13.3
Adapter    "influxdb"     : 3.2.0    , installed 3.2.0
Adapter    "info"         : 2.0.0    , installed 2.0.0
Adapter    "iot"          : 2.0.11   , installed 2.0.11
Adapter    "jarvis"       : 3.1.8    , installed 3.1.9-beta.3
Adapter    "javascript"   : 7.1.6    , installed 7.1.6
Controller "js-controller": 5.0.16   , installed 5.0.16
Adapter    "modbus"       : 6.0.1    , installed 6.0.1
Adapter    "mqtt"         : 5.1.0    , installed 5.1.0
Adapter    "net-tools"    : 0.2.0    , installed 0.2.0
Adapter    "node-red"     : 4.0.3    , installed 4.0.3
Adapter    "nuki"         : 1.6.0    , installed 1.6.0
Adapter    "opendtu"      : 1.0.1    , installed 1.0.1
Adapter    "panasonic-viera": 2.0.0  , installed 2.0.0
Adapter    "ping"         : 1.6.2    , installed 1.6.2
Adapter    "rpi2"         : 1.3.2    , installed 1.3.2
Adapter    "shelly"       : 6.6.1    , installed 6.6.1
Adapter    "simple-api"   : 2.7.2    , installed 2.7.2
Adapter    "smartmeter"   : 3.3.4    , installed 3.3.4
Adapter    "socketio"     : 6.6.0    , installed 6.6.0
Adapter    "sonoff"       : 3.0.3    , installed 3.0.3
Adapter    "telegram"     : 3.0.0    , installed 3.0.0
Adapter    "tr-064"       : 4.2.18   , installed 4.2.18
Adapter    "web"          : 6.1.10   , installed 6.1.10
Adapter    "ws"           : 2.5.8    , installed 2.5.8

Objects and States
Please stand by - This may take a while
Objects:        9004
States:         8403

*** OS-Repositories and Updates ***
Hit:1 http://deb.debian.org/debian bookworm InRelease
Hit:2 http://archive.raspberrypi.com/debian bookworm InRelease
Hit:3 http://deb.debian.org/debian-security bookworm-security InRelease
Hit:4 http://deb.debian.org/debian bookworm-updates InRelease
Hit:5 https://repos.influxdata.com/debian stable InRelease
Hit:6 https://apt.grafana.com stable InRelease
Hit:7 https://deb.nodesource.com/node_18.x nodistro InRelease
Reading package lists...
Pending Updates: 0

*** Listening Ports ***
Active Internet connections (only servers)
Proto Recv-Q Send-Q Local Address           Foreign Address         State       User       Inode      PID/Program name
tcp        0      0 127.0.0.1:9000          0.0.0.0:*               LISTEN      1001       16637      968/iobroker.js-con
tcp        0      0 127.0.0.1:9001          0.0.0.0:*               LISTEN      1001       16630      968/iobroker.js-con
tcp        0      0 192.168.178.121:12001   0.0.0.0:*               LISTEN      1001       17859      1336/io.hm-rpc.1
tcp        0      0 192.168.178.121:12010   0.0.0.0:*               LISTEN      1001       14188      1351/io.hm-rpc.2
tcp        0      0 192.168.178.121:18701   0.0.0.0:*               LISTEN      1001       17824      1306/io.hm-rpc.0
tcp        0      0 0.0.0.0:1880            0.0.0.0:*               LISTEN      1001       17696      1113/node-red
tcp        0      0 0.0.0.0:1882            0.0.0.0:*               LISTEN      1001       18673      1433/io.shelly.0
tcp        0      0 0.0.0.0:1883            0.0.0.0:*               LISTEN      106        961        794/mosquitto
tcp        0      0 0.0.0.0:1886            0.0.0.0:*               LISTEN      1001       18048      1454/io.sonoff.0
tcp        0      0 192.168.178.121:2001    0.0.0.0:*               LISTEN      1001       17887      1366/io.hm-rpc.3
tcp        0      0 0.0.0.0:8400            0.0.0.0:*               LISTEN      1001       23565      2264/io.jarvis.0
tcp        0      0 0.0.0.0:22              0.0.0.0:*               LISTEN      0          975        807/sshd: /usr/sbin
tcp        0      0 192.168.178.121:9092    0.0.0.0:*               LISTEN      1001       23892      2310/io.nuki.0
tcp6       0      0 :::8081                 :::*                    LISTEN      1001       17483      996/io.admin.0
tcp6       0      0 :::8082                 :::*                    LISTEN      1001       25013      2451/io.web.0
tcp6       0      0 :::8084                 :::*                    LISTEN      1001       23369      2432/io.socketio.0
tcp6       0      0 :::8086                 :::*                    LISTEN      999        16591      891/influxd
tcp6       0      0 :::3000                 :::*                    LISTEN      107        15958      967/grafana
tcp6       0      0 :::1883                 :::*                    LISTEN      106        962        794/mosquitto
tcp6       0      0 :::22                   :::*                    LISTEN      0          977        807/sshd: /usr/sbin
udp        0      0 0.0.0.0:5353            0.0.0.0:*                           104        15696      677/avahi-daemon: r
udp        0      0 0.0.0.0:60563           0.0.0.0:*                           104        15698      677/avahi-daemon: r
udp6       0      0 fe80::f05b:9255:16f:546 :::*                                0          17446      758/NetworkManager
udp6       0      0 fe80::38be:beb2:fe6:546 :::*                                0          16559      758/NetworkManager
udp6       0      0 :::5353                 :::*                                104        15697      677/avahi-daemon: r
udp6       0      0 :::34544                :::*                                104        15699      677/avahi-daemon: r

*** Log File - Last 25 Lines ***

2023-11-11 00:10:01.823  - info: simple-api.0 (2409) Allow states only when user is owner: false
2023-11-11 00:10:05.024  - info: host.Raspberrypi5 instance system.adapter.socketio.0 started with pid 2432
2023-11-11 00:10:05.985  - info: socketio.0 (2432) starting. Version 6.6.0 in /opt/iobroker/node_modules/iobroker.socketio, node: v18.18.2, js-controller: 5.0.16
2023-11-11 00:10:06.016  - warn: socketio.0 (2432) Information for Developer: Using the direct "Let's encrypt" module import is deprecated and will be removed in the next js-controller version, use @iobroker/webserver instead
2023-11-11 00:10:06.044  - info: socketio.0 (2432) socket.io server listening on port 8084
2023-11-11 00:10:09.006  - info: host.Raspberrypi5 instance system.adapter.web.0 started with pid 2451
2023-11-11 00:10:09.929  - info: web.0 (2451) starting. Version 6.1.10 in /opt/iobroker/node_modules/iobroker.web, node: v18.18.2, js-controller: 5.0.16
2023-11-11 00:10:10.067  - info: web.0 (2451) socket.io server listening on port 8082
2023-11-11 00:10:10.072  - info: web.0 (2451) http server listening on port 8082
2023-11-11 00:10:22.543  - info: cloud.0 (1526) Trying to connect as system.user.admin to cloud
2023-11-11 00:10:22.667  - info: cloud.0 (1526) Connection changed: connect
2023-11-11 00:21:24.723  - info: admin.0 (996) <== Disconnect system.user.admin from ::ffff:192.168.178.63 admin
2023-11-11 00:30:00.108  - info: host.Raspberrypi5 instance system.adapter.ical.0 started with pid 4855
2023-11-11 00:30:01.141  - info: ical.0 (4855) starting. Version 1.13.3 in /opt/iobroker/node_modules/iobroker.ical, node: v18.18.2, js-controller: 5.0.16
xxxxxxxxxxxxxxxx
2023-11-11 00:30:06.664  - info: ical.0 (4855) Terminated (NO_ERROR): Without reason
2023-11-11 00:30:07.183  - info: host.Raspberrypi5 instance system.adapter.ical.0 terminated with code 0 (NO_ERROR)
2023-11-11 00:30:56.211  - info: admin.0 (996) ==> Connected system.user.admin from ::ffff:192.168.178.63
2023-11-11 00:31:04.428  - info: host.Raspberrypi5 "system.adapter.telegram.0" enabled
2023-11-11 00:31:04.554  - info: host.Raspberrypi5 instance system.adapter.telegram.0 started with pid 5016
2023-11-11 00:31:05.767  - info: telegram.0 (5016) starting. Version 3.0.0 in /opt/iobroker/node_modules/iobroker.telegram, node: v18.18.2, js-controller: 5.0.16
2023-11-11 00:31:24.629  - info: admin.0 (996) <== Disconnect system.user.admin from ::ffff:192.168.178.63 admin

============ Mark until here for C&P =============