Iobroker nicht mehr erreichbar - Firewall?
-
Vermutlich gibt es im Verzeichnis /etc/apt/sources.list.d/ entsprechende .list-Dateien.
ls -lAh /etc/apt/sources.list.d/anschauen.
-
@thomas-braun mit rm kann ich es nicht löschen - keine Berechtigung
-
Wie heißt die Datei?
Und Dateien darf nur ein user löschen, der die auch schreiben darf. In dem Fall werden root-Rechte benötigt. Alsosudo rm /pfad/zur/datei -
@thomas-braun ok gelöscht. Danke
Iobroker neu gestartet, geht aber immer noch nicht. Soll ich nochmals versuchen. Aber was neues wird er hier nicht anzeigeniob diag -
Lass nochmal sehen...
-
@thomas-braun anbei
Skript v.2023-10-10 *** BASE SYSTEM *** Static hostname: raspberrypi Icon name: computer Operating System: Debian GNU/Linux 11 (bullseye) Kernel: Linux 6.1.21-v8+ Architecture: arm64 Model : Raspberry Pi 4 Model B Rev 1.5 Docker : false Virtualization : none Kernel : aarch64 Userland : arm64 Systemuptime and Load: 18:26:56 up 5:39, 3 users, load average: 2.37, 2.24, 2.15 CPU threads: 4 *** RASPBERRY THROTTLING *** Current issues: No throttling issues detected. Previously detected issues: ~ Under-voltage has occurred *** Time and Time Zones *** Local time: Fri 2023-11-17 18:26:56 CET Universal time: Fri 2023-11-17 17:26:56 UTC RTC time: n/a Time zone: Europe/Berlin (CET, +0100) System clock synchronized: yes NTP service: active RTC in local TZ: no *** User and Groups *** feline /home/feline feline adm dialout cdrom sudo audio video plugdev games users input render netdev lpadmin gpio i2c spi iobroker *** X-Server-Setup *** /home/iobroker/.diag.sh: line 200: [[: 678 4373: syntax error in expression (error token is "4373") X-Server: false Desktop: Terminal: tty Boot Target: graphical.target *** MEMORY *** total used free shared buff/cache available Mem: 7.8G 1.3G 4.2G 80M 2.3G 6.3G Swap: 99M 0B 99M Total: 7.9G 1.3G 4.3G 7812 M total memory 1251 M used memory 1910 M active memory 1298 M inactive memory 4232 M free memory 254 M buffer memory 2073 M swap cache 99 M total swap 0 M used swap 99 M free swap Raspberry only: oom events: 0 lifetime oom required: 0 Mbytes total time in oom handler: 0 ms max time spent in oom handler: 0 ms *** FAILED SERVICES *** UNIT LOAD ACTIVE SUB DESCRIPTION * iobroker.service loaded failed failed ioBroker Server LOAD = Reflects whether the unit definition was properly loaded. ACTIVE = The high-level unit activation state, i.e. generalization of SUB. SUB = The low-level unit activation state, values depend on unit type. 1 loaded units listed. *** FILESYSTEM *** Filesystem Type Size Used Avail Use% Mounted on /dev/root ext4 29G 20G 8.3G 71% / devtmpfs devtmpfs 3.6G 0 3.6G 0% /dev tmpfs tmpfs 3.9G 29M 3.8G 1% /dev/shm tmpfs tmpfs 1.6G 1.3M 1.6G 1% /run tmpfs tmpfs 5.0M 4.0K 5.0M 1% /run/lock /dev/mmcblk0p1 vfat 255M 31M 225M 13% /boot tmpfs tmpfs 782M 28K 782M 1% /run/user/1000 tmpfs tmpfs 782M 28K 782M 1% /run/user/1002 Messages concerning ext4 filesystem in dmesg: Show mounted filesystems \(real ones only\): TARGET SOURCE FSTYPE OPTIONS / /dev/mmcblk0p2 ext4 rw,noatime `-/boot /dev/mmcblk0p1 vfat rw,relatime,fmask=0022,dmask=0022,codepage=437,iocharset=ascii,shortname=mixed,errors=remount-ro Files in neuralgic directories: /var: 3.5G /var/ 3.1G /var/log 2.9G /var/log/journal/378e881158e14149bc4f8e6771c6d1d7 2.9G /var/log/journal 205M /var/cache Archived and active journals take up 2.8G in the file system. /opt/iobroker/backups: 230M /opt/iobroker/backups/ /opt/iobroker/iobroker-data: 384M /opt/iobroker/iobroker-data/ 310M /opt/iobroker/iobroker-data/files 52M /opt/iobroker/iobroker-data/files/javascript.admin 51M /opt/iobroker/iobroker-data/backup-objects 45M /opt/iobroker/iobroker-data/files/devices.admin/static The five largest files in iobroker-data are: 35M /opt/iobroker/iobroker-data/files/devices.admin/static/js/main.24f2bb56.js.map 21M /opt/iobroker/iobroker-data/files/web.admin/static/js/main.edf7552a.js.map 19M /opt/iobroker/iobroker-data/files/iot.admin/static/js/main.2975a411.js.map 11M /opt/iobroker/iobroker-data/objects.jsonl 8.9M /opt/iobroker/iobroker-data/files/scenes.admin/static/js/2.7de3299d.chunk.js.map USB-Devices by-id: USB-Sticks - Avoid direct links to /dev/* in your adapter setups, please always prefer the links 'by-id': find: '/dev/serial/by-id/': No such file or directory *** NodeJS-Installation *** /usr/bin/nodejs v18.18.2 /usr/bin/node v18.18.2 /usr/bin/npm 9.8.1 /usr/bin/npx 9.8.1 /usr/bin/corepack 0.19.0 nodejs: Installed: 18.18.2-1nodesource1 Candidate: 18.18.2-1nodesource1 Version table: *** 18.18.2-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 100 /var/lib/dpkg/status 18.18.1-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.18.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.17.1-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.17.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.16.1-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.16.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.15.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.14.2-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.14.1-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.14.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.13.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.12.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.11.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.10.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.9.1-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.9.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.8.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.7.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.6.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.5.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.4.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.3.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.2.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.1.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.0.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 12.22.12~dfsg-1~deb11u4 500 500 http://deb.debian.org/debian bullseye/main arm64 Packages 500 http://security.debian.org/debian-security bullseye-security/main arm64 Packages Temp directories causing npm8 problem: 0 No problems detected Errors in npm tree: *** ioBroker-Installation *** ioBroker Status iobroker is not running on this host. Objects type: jsonl States type: jsonl Core adapters versions js-controller: 5.0.16 admin: 6.12.0 javascript: 7.1.4 Adapters from github: 8 Adapter State system.adapter.admin.0 : admin : raspberrypi - enabled, port: 8081, bind: 192.168.178.69, run as: admin system.adapter.alexa2.0 : alexa2 : raspberrypi - enabled system.adapter.apple-find-me.0 : apple-find-me : raspberrypi - disabled system.adapter.backitup.0 : backitup : raspberrypi - enabled system.adapter.ble.0 : ble : raspberrypi - disabled system.adapter.daswetter.0 : daswetter : raspberrypi - enabled system.adapter.denon.0 : denon : raspberrypi - enabled system.adapter.discovery.0 : discovery : raspberrypi - enabled system.adapter.dwd.0 : dwd : raspberrypi - disabled system.adapter.energiefluss.0 : energiefluss : raspberrypi - enabled system.adapter.evcc.0 : evcc : raspberrypi - enabled, port: 7070 system.adapter.flot.0 : flot : raspberrypi - enabled system.adapter.fullybrowser.0 : fullybrowser : raspberrypi - disabled system.adapter.history.0 : history : raspberrypi - enabled system.adapter.homeconnect.0 : homeconnect : raspberrypi - enabled system.adapter.ical.0 : ical : raspberrypi - enabled system.adapter.icons-mfd-svg.0 : icons-mfd-svg : raspberrypi - enabled system.adapter.iot.0 : iot : raspberrypi - enabled system.adapter.javascript.0 : javascript : raspberrypi - enabled system.adapter.lgtv.0 : lgtv : raspberrypi - enabled system.adapter.mediola-gateway.0 : mediola-gateway : raspberrypi - enabled system.adapter.meross.0 : meross : raspberrypi - enabled system.adapter.modbus.0 : modbus : raspberrypi - disabled system.adapter.mqtt-client.0 : mqtt-client : raspberrypi - disabled, port: 1883 system.adapter.nuki-extended.0 : nuki-extended : raspberrypi - disabled system.adapter.nuki.0 : nuki : raspberrypi - disabled system.adapter.openligadb.0 : openligadb : raspberrypi - enabled system.adapter.parser.0 : parser : raspberrypi - disabled system.adapter.pegelalarm.0 : pegelalarm : raspberrypi - enabled system.adapter.pollenflug.0 : pollenflug : raspberrypi - enabled system.adapter.radar2.0 : radar2 : raspberrypi - enabled system.adapter.scenes.0 : scenes : raspberrypi - enabled system.adapter.shelly.0 : shelly : raspberrypi - enabled, port: 1882, bind: 0.0.0.0 system.adapter.shuttercontrol.0 : shuttercontrol : raspberrypi - enabled system.adapter.socketio.0 : socketio : raspberrypi - enabled, port: 8084, bind: 0.0.0.0, run as: admin system.adapter.solaredge.0 : solaredge : raspberrypi - disabled system.adapter.tesla-motors.0 : tesla-motors : raspberrypi - enabled system.adapter.trashschedule.0 : trashschedule : raspberrypi - disabled system.adapter.vis-hqwidgets.0 : vis-hqwidgets : raspberrypi - enabled system.adapter.vis-icontwo.0 : vis-icontwo : raspberrypi - enabled system.adapter.vis-inventwo.0 : vis-inventwo : raspberrypi - enabled system.adapter.vis-jqui-mfd.0 : vis-jqui-mfd : raspberrypi - enabled system.adapter.vis-map.0 : vis-map : raspberrypi - enabled system.adapter.vis-material-advanced.0 : vis-material-advanced : raspberrypi - enabled system.adapter.vis-materialdesign.0 : vis-materialdesign : raspberrypi - enabled system.adapter.vis-timeandweather.0 : vis-timeandweather : raspberrypi - enabled system.adapter.vis.0 : vis : raspberrypi - enabled system.adapter.vw-connect.0 : vw-connect : raspberrypi - enabled system.adapter.weatherunderground.0 : weatherunderground : raspberrypi - enabled system.adapter.web.0 : web : raspberrypi - enabled, port: 8082, bind: 192.168.178.69, run as: admin system.adapter.webcal.0 : webcal : raspberrypi - enabled system.adapter.yahka.0 : yahka : raspberrypi - enabled + instance is alive Enabled adapters with bindings system.adapter.admin.0 : admin : raspberrypi - enabled, port: 8081, bind: 192.168.178.69, run as: admin system.adapter.evcc.0 : evcc : raspberrypi - enabled, port: 7070 system.adapter.shelly.0 : shelly : raspberrypi - enabled, port: 1882, bind: 0.0.0.0 system.adapter.socketio.0 : socketio : raspberrypi - enabled, port: 8084, bind: 0.0.0.0, run as: admin system.adapter.web.0 : web : raspberrypi - enabled, port: 8082, bind: 192.168.178.69, run as: admin ioBroker-Repositories stable : http://download.iobroker.net/sources-dist.json beta : http://download.iobroker.net/sources-dist-latest.json Active repo(s): stable Installed ioBroker-Instances Used repository: stable Adapter "admin" : 6.12.0 , installed 6.12.0 Adapter "alexa2" : 3.26.1 , installed 3.26.1 Adapter "apple-find-me": 0.0.14 , installed 0.0.14 Adapter "backitup" : 2.8.7 , installed 2.8.7 Adapter "ble" : 0.13.4 , installed 0.13.4 Adapter "bshb" : 0.2.4 , installed 0.2.4 Adapter "cloud" : 4.4.1 , installed 4.4.1 Adapter "daswetter" : 3.1.10 , installed 3.1.10 Adapter "denon" : 1.15.4 , installed 1.15.4 Adapter "devices" : 1.1.5 , installed 1.1.5 Adapter "discovery" : 4.2.0 , installed 3.1.0 [Updatable] Adapter "dwd" : 2.8.5 , installed 2.8.5 Adapter "evcc" : 0.0.10 , installed 0.0.10 Adapter "flot" : 1.12.0 , installed 1.12.0 Adapter "fullybrowser" : 2.2.0 , installed 2.2.0 Adapter "history" : 3.0.1 , installed 3.0.1 Adapter "homeconnect" : 1.1.1 , installed 1.1.1 Adapter "homekit-controller": 0.5.8, installed 0.5.8 Adapter "ical" : 1.13.3 , installed 1.13.3 Adapter "icons-mfd-svg": 1.1.0 , installed 1.1.0 Adapter "iot" : 2.0.11 , installed 1.14.5 [Updatable] Adapter "javascript" : 7.1.4 , installed 7.1.4 Controller "js-controller": 5.0.16 , installed 5.0.16 Adapter "lgtv" : 2.1.2 , installed 2.1.1 [Updatable] Adapter "mediola-gateway": 1.0.1 , installed 1.0.1 Adapter "meross" : 1.15.1 , installed 1.15.1 Adapter "modbus" : 5.0.11 , installed 5.0.11 Adapter "mqtt-client" : 1.6.5 , installed 1.6.5 Adapter "net-tools" : 0.2.0 , installed 0.2.0 Adapter "nuki" : 1.6.0 , installed 1.6.0 Adapter "nuki-extended": 2.6.5 , installed 2.6.5 Adapter "openligadb" : 1.2.4 , installed 1.3.4 Adapter "parser" : 2.0.7 , installed 1.3.2 [Updatable] Adapter "pegelalarm" : 1.3.1 , installed 1.3.1 Adapter "pollenflug" : 1.0.6 , installed 1.0.6 Adapter "radar2" : 2.0.8 , installed 2.0.8 Adapter "scenes" : 2.3.9 , installed 2.3.9 Adapter "shelly" : 6.6.1 , installed 6.6.1 Adapter "shuttercontrol": 1.6.2 , installed 1.6.2 Adapter "simple-api" : 2.7.2 , installed 2.7.2 Adapter "socketio" : 6.5.5 , installed 6.5.5 Adapter "solarviewdatareader": 1.0.7, installed 1.0.7 Adapter "tesla-motors" : 1.3.2 , installed 1.3.2 Adapter "trashschedule": 2.3.0 , installed 2.2.0 [Updatable] Adapter "tvprogram" : 1.1.2 , installed 1.1.2 Adapter "vis" : 1.4.16 , installed 1.4.16 Adapter "vis-hqwidgets": 1.4.0 , installed 1.4.0 Adapter "vis-icontwo" : 0.96.0 , installed 0.96.0 Adapter "vis-inventwo" : 3.3.3 , installed 3.3.3 Adapter "vis-jqui-mfd" : 1.0.12 , installed 1.0.12 Adapter "vis-map" : 1.0.4 , installed 1.0.4 Adapter "vis-material-advanced": 1.7.4, installed 1.7.4 Adapter "vis-timeandweather": 1.2.2, installed 1.2.2 Adapter "vw-connect" : 0.0.67 , installed 0.0.67 Adapter "weatherunderground": 3.6.0, installed 3.6.0 Adapter "web" : 6.1.10 , installed 6.1.2 [Updatable] Adapter "ws" : 2.5.8 , installed 2.5.5 [Updatable] Adapter "yahka" : 1.0.3 , installed 1.0.3 Objects and States Please stand by - This may take a while Objects: 12529 States: 10443 *** OS-Repositories and Updates *** Hit:1 http://security.debian.org/debian-security bullseye-security InRelease Hit:2 http://deb.debian.org/debian bullseye InRelease Hit:3 http://deb.debian.org/debian bullseye-updates InRelease Get:4 https://dl.cloudsmith.io/public/evcc/stable/deb/debian bullseye InRelease [5127 B] Hit:5 http://archive.raspberrypi.org/debian bullseye InRelease Hit:6 https://deb.nodesource.com/node_18.x nodistro InRelease Fetched 5127 B in 3s (1924 B/s) Reading package lists... Pending Updates: 0 *** Listening Ports *** Active Internet connections (only servers) Proto Recv-Q Send-Q Local Address Foreign Address State User Inode PID/Program name tcp 0 0 0.0.0.0:22 0.0.0.0:* LISTEN 0 15515 659/sshd: /usr/sbin tcp 0 0 127.0.0.1:631 0.0.0.0:* LISTEN 0 15651 612/cupsd tcp6 0 0 :::22 :::* LISTEN 0 15517 659/sshd: /usr/sbin tcp6 0 0 ::1:631 :::* LISTEN 0 15650 612/cupsd tcp6 0 0 :::4712 :::* LISTEN 116 107895 22094/evcc tcp6 0 0 :::3000 :::* LISTEN 120 17960 620/grafana tcp6 0 0 :::7070 :::* LISTEN 116 107024 22094/evcc tcp6 0 0 :::3389 :::* LISTEN 117 13027 683/xrdp tcp6 0 0 ::1:3350 :::* LISTEN 0 15521 649/xrdp-sesman udp 0 0 0.0.0.0:631 0.0.0.0:* 0 13004 696/cups-browsed udp 0 0 0.0.0.0:58178 0.0.0.0:* 108 16393 467/avahi-daemon: r udp 0 0 224.0.0.251:5353 0.0.0.0:* 1002 107880 4761/chromium-brows udp 0 0 0.0.0.0:5353 0.0.0.0:* 108 16391 467/avahi-daemon: r udp 0 0 0.0.0.0:68 0.0.0.0:* 0 16549 543/dhcpcd udp6 0 0 :::546 :::* 0 23799 543/dhcpcd udp6 0 0 :::5353 :::* 108 16392 467/avahi-daemon: r udp6 0 0 :::59193 :::* 108 16394 467/avahi-daemon: r -
-
Und schalt den Desktop aus!
Insbesondere den Remote Desktop! -
@line sagte in Iobroker nicht mehr erreichbar - Firewall?:
~ Under-voltage has occurred
Netzteil zu schwach ?
-
@thomas-braun sagte in Iobroker nicht mehr erreichbar - Firewall?:
bind: 192.168.178.69Das sollte 0.0.0.0. heißen.
@line
siehe Doku:
ist sogar rot
-
@homoran das hab ich nun umgestellt. Jetzt erreiche ich den iobroker nicht mal mehr über den raspi. Was nun?
-
@line sagte in Iobroker nicht mehr erreichbar - Firewall?:
@homoran das hab ich nun umgestellt. Jetzt erreiche ich den iobroker nicht mal mehr über den raspi. Was nun?
iob list instancesbitte -
@homoran Danke dir
system.adapter.admin.0 : admin : raspberrypi - disabled, port: 8081, bind: 0.0.0.0, run as: admin + system.adapter.alexa2.0 : alexa2 : raspberrypi - enabled system.adapter.apple-find-me.0 : apple-find-me : raspberrypi - disabled + system.adapter.backitup.0 : backitup : raspberrypi - enabled system.adapter.ble.0 : ble : raspberrypi - disabled system.adapter.daswetter.0 : daswetter : raspberrypi - enabled + system.adapter.denon.0 : denon : raspberrypi - enabled + system.adapter.discovery.0 : discovery : raspberrypi - enabled system.adapter.dwd.0 : dwd : raspberrypi - disabled + system.adapter.energiefluss.0 : energiefluss : raspberrypi - enabled + system.adapter.evcc.0 : evcc : raspberrypi - enabled, port: 7070 system.adapter.flot.0 : flot : raspberrypi - enabled system.adapter.fullybrowser.0 : fullybrowser : raspberrypi - disabled + system.adapter.history.0 : history : raspberrypi - enabled + system.adapter.homeconnect.0 : homeconnect : raspberrypi - enabled system.adapter.ical.0 : ical : raspberrypi - enabled system.adapter.icons-mfd-svg.0 : icons-mfd-svg : raspberrypi - enabled + system.adapter.iot.0 : iot : raspberrypi - enabled + system.adapter.javascript.0 : javascript : raspberrypi - enabled + system.adapter.lgtv.0 : lgtv : raspberrypi - enabled + system.adapter.mediola-gateway.0 : mediola-gateway : raspberrypi - enabled + system.adapter.meross.0 : meross : raspberrypi - enabled system.adapter.modbus.0 : modbus : raspberrypi - disabled system.adapter.mqtt-client.0 : mqtt-client : raspberrypi - disabled, port: 1883 system.adapter.nuki-extended.0 : nuki-extended : raspberrypi - disabled system.adapter.nuki.0 : nuki : raspberrypi - disabled + system.adapter.openligadb.0 : openligadb : raspberrypi - enabled system.adapter.parser.0 : parser : raspberrypi - disabled system.adapter.pegelalarm.0 : pegelalarm : raspberrypi - enabled + system.adapter.pollenflug.0 : pollenflug : raspberrypi - enabled + system.adapter.radar2.0 : radar2 : raspberrypi - enabled + system.adapter.scenes.0 : scenes : raspberrypi - enabled + system.adapter.shelly.0 : shelly : raspberrypi - enabled, port: 1882, bind: 0.0.0.0 + system.adapter.shuttercontrol.0 : shuttercontrol : raspberrypi - enabled + system.adapter.socketio.0 : socketio : raspberrypi - enabled, port: 8084, bind: 0.0.0.0, run as: admin system.adapter.solaredge.0 : solaredge : raspberrypi - disabled + system.adapter.tesla-motors.0 : tesla-motors : raspberrypi - enabled system.adapter.trashschedule.0 : trashschedule : raspberrypi - disabled system.adapter.vis-hqwidgets.0 : vis-hqwidgets : raspberrypi - enabled system.adapter.vis-icontwo.0 : vis-icontwo : raspberrypi - enabled + system.adapter.vis-inventwo.0 : vis-inventwo : raspberrypi - enabled system.adapter.vis-jqui-mfd.0 : vis-jqui-mfd : raspberrypi - enabled system.adapter.vis-map.0 : vis-map : raspberrypi - enabled system.adapter.vis-material-advanced.0 : vis-material-advanced : raspberrypi - enabled system.adapter.vis-materialdesign.0 : vis-materialdesign : raspberrypi - enabled system.adapter.vis-timeandweather.0 : vis-timeandweather : raspberrypi - enabled system.adapter.vis.0 : vis : raspberrypi - enabled + system.adapter.vw-connect.0 : vw-connect : raspberrypi - enabled system.adapter.weatherunderground.0 : weatherunderground : raspberrypi - enabled + system.adapter.web.0 : web : raspberrypi - enabled, port: 8082, bind: 192.168.178.69, run as: admin + system.adapter.webcal.0 : webcal : raspberrypi - enabled + system.adapter.yahka.0 : yahka : raspberrypi - enabled + instance is alive -
@line iob start admin
-
@homoran ok jetzt läuft er auf dem raspberry wieder - jetzt war ich gerade völlig verzweifelt. Danke dafür
Aber auf dem Pad oder pc sieht es immer noch nicht besser aus -
-
pgrep -f "Xorg" 673 2969Ion diag
system.adapter.admin.0 : admin : raspberrypi - disabled, port: 8081, bind: 0.0.0.0, run as: admin + system.adapter.alexa2.0 : alexa2 : raspberrypi - enabled system.adapter.apple-find-me.0 : apple-find-me : raspberrypi - disabled + system.adapter.backitup.0 : backitup : raspberrypi - enabled system.adapter.ble.0 : ble : raspberrypi - disabled system.adapter.daswetter.0 : daswetter : raspberrypi - enabled + system.adapter.denon.0 : denon : raspberrypi - enabled + system.adapter.discovery.0 : discovery : raspberrypi - enabled system.adapter.dwd.0 : dwd : raspberrypi - disabled + system.adapter.energiefluss.0 : energiefluss : raspberrypi - enabled + system.adapter.evcc.0 : evcc : raspberrypi - enabled, port: 7070 system.adapter.flot.0 : flot : raspberrypi - enabled system.adapter.fullybrowser.0 : fullybrowser : raspberrypi - disabled + system.adapter.history.0 : history : raspberrypi - enabled + system.adapter.homeconnect.0 : homeconnect : raspberrypi - enabled system.adapter.ical.0 : ical : raspberrypi - enabled system.adapter.icons-mfd-svg.0 : icons-mfd-svg : raspberrypi - enabled + system.adapter.iot.0 : iot : raspberrypi - enabled + system.adapter.javascript.0 : javascript : raspberrypi - enabled + system.adapter.lgtv.0 : lgtv : raspberrypi - enabled + system.adapter.mediola-gateway.0 : mediola-gateway : raspberrypi - enabled + system.adapter.meross.0 : meross : raspberrypi - enabled system.adapter.modbus.0 : modbus : raspberrypi - disabled system.adapter.mqtt-client.0 : mqtt-client : raspberrypi - disabled, port: 1883 system.adapter.nuki-extended.0 : nuki-extended : raspberrypi - disabled system.adapter.nuki.0 : nuki : raspberrypi - disabled + system.adapter.openligadb.0 : openligadb : raspberrypi - enabled system.adapter.parser.0 : parser : raspberrypi - disabled system.adapter.pegelalarm.0 : pegelalarm : raspberrypi - enabled + system.adapter.pollenflug.0 : pollenflug : raspberrypi - enabled + system.adapter.radar2.0 : radar2 : raspberrypi - enabled + system.adapter.scenes.0 : scenes : raspberrypi - enabled + system.adapter.shelly.0 : shelly : raspberrypi - enabled, port: 1882, bind: 0.0.0.0 + system.adapter.shuttercontrol.0 : shuttercontrol : raspberrypi - enabled + system.adapter.socketio.0 : socketio : raspberrypi - enabled, port: 8084, bind: 0.0.0.0, run as: admin system.adapter.solaredge.0 : solaredge : raspberrypi - disabled + system.adapter.tesla-motors.0 : tesla-motors : raspberrypi - enabled system.adapter.trashschedule.0 : trashschedule : raspberrypi - disabled system.adapter.vis-hqwidgets.0 : vis-hqwidgets : raspberrypi - enabled system.adapter.vis-icontwo.0 : vis-icontwo : raspberrypi - enabled + system.adapter.vis-inventwo.0 : vis-inventwo : raspberrypi - enabled system.adapter.vis-jqui-mfd.0 : vis-jqui-mfd : raspberrypi - enabled system.adapter.vis-map.0 : vis-map : raspberrypi - enabled system.adapter.vis-material-advanced.0 : vis-material-advanced : raspberrypi - enabled system.adapter.vis-materialdesign.0 : vis-materialdesign : raspberrypi - enabled system.adapter.vis-timeandweather.0 : vis-timeandweather : raspberrypi - enabled system.adapter.vis.0 : vis : raspberrypi - enabled + system.adapter.vw-connect.0 : vw-connect : raspberrypi - enabled system.adapter.weatherunderground.0 : weatherunderground : raspberrypi - enabled + system.adapter.web.0 : web : raspberrypi - enabled, port: 8082, bind: 192.168.178.69, run as: admin + system.adapter.webcal.0 : webcal : raspberrypi - enabled + system.adapter.yahka.0 : yahka : raspberrypi - enabled + instance is alive feline@raspberrypi:~ $ iob start admin The adapter "admin.0" was started. feline@raspberrypi:~ $ pgrep -f "Xorg" 673 2969 feline@raspberrypi:~ $ iob diag *** iob diag is starting up, please wait *** *** ioBroker Diagnosis *** Please stretch the window of your terminal programm (puTTY) as wide as possible or switch to full screen The following checks may give hints to potential malconfigurations or errors, please post them in our forum: https://forum.iobroker.net Just copy and paste the Summary Page, including the ``` characters at start and end. It helps us to help you! Press any key to continue ======== Start marking the full check here ========= Skript v.2023-10-10 *** BASE SYSTEM *** Static hostname: raspberrypi Icon name: computer Operating System: Debian GNU/Linux 11 (bullseye) Kernel: Linux 6.1.21-v8+ Architecture: arm64 Model : Raspberry Pi 4 Model B Rev 1.5 Docker : false Virtualization : none Kernel : aarch64 Userland : arm64 Systemuptime and Load: 21:52:48 up 55 min, 3 users, load average: 0.61, 0.54, 0.54 CPU threads: 4 *** RASPBERRY THROTTLING *** Current issues: No throttling issues detected. Previously detected issues: No throttling issues detected. *** Time and Time Zones *** Local time: Fri 2023-11-17 21:52:48 CET Universal time: Fri 2023-11-17 20:52:48 UTC RTC time: n/a Time zone: Europe/Berlin (CET, +0100) System clock synchronized: yes NTP service: active RTC in local TZ: no *** User and Groups *** feline /home/feline feline adm dialout cdrom sudo audio video plugdev games users input render netdev lpadmin gpio i2c spi iobroker *** X-Server-Setup *** /home/iobroker/.diag.sh: line 200: [[: 673 2969: syntax error in expression (error token is "2969") X-Server: false Desktop: Terminal: tty Boot Target: graphical.target *** MEMORY *** total used free shared buff/cache available Mem: 7.8G 2.3G 4.1G 73M 1.4G 5.3G Swap: 99M 0B 99M Total: 7.9G 2.3G 4.2G 7812 M total memory 2335 M used memory 2930 M active memory 618 M inactive memory 4065 M free memory 75 M buffer memory 1335 M swap cache 99 M total swap 0 M used swap 99 M free swap Raspberry only: oom events: 0 lifetime oom required: 0 Mbytes total time in oom handler: 0 ms max time spent in oom handler: 0 ms *** FAILED SERVICES *** UNIT LOAD ACTIVE SUB DESCRIPTION 0 loaded units listed. *** FILESYSTEM *** Filesystem Type Size Used Avail Use% Mounted on /dev/root ext4 29G 20G 8.2G 71% / devtmpfs devtmpfs 3.6G 0 3.6G 0% /dev tmpfs tmpfs 3.9G 24M 3.8G 1% /dev/shm tmpfs tmpfs 1.6G 1.3M 1.6G 1% /run tmpfs tmpfs 5.0M 4.0K 5.0M 1% /run/lock /dev/mmcblk0p1 vfat 255M 31M 225M 13% /boot tmpfs tmpfs 782M 28K 782M 1% /run/user/1000 tmpfs tmpfs 782M 28K 782M 1% /run/user/1002 Messages concerning ext4 filesystem in dmesg: [Fri Nov 17 20:57:07 2023] Kernel command line: coherent_pool=1M 8250.nr_uarts=0 snd_bcm2835.enable_headphones=0 snd_bcm2835.enable_headphones=1 snd_bcm2835.enable_hdmi=1 snd_bcm2835.enable_hdmi=0 smsc95xx.macaddr=D8:3A:DD:38:62:0F vc_mem.mem_base=0x3ec00000 vc_mem.mem_size=0x40000000 console=ttyS0,115200 console=tty1 root=PARTUUID=b4c0fa64-02 rootfstype=ext4 fsck.repair=yes rootwait quiet splash plymouth.ignore-serial-consoles [Fri Nov 17 20:57:08 2023] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Quota mode: none. [Fri Nov 17 20:57:08 2023] VFS: Mounted root (ext4 filesystem) readonly on device 179:2. [Fri Nov 17 20:57:10 2023] EXT4-fs (mmcblk0p2): re-mounted. Quota mode: none. Show mounted filesystems \(real ones only\): TARGET SOURCE FSTYPE OPTIONS / /dev/mmcblk0p2 ext4 rw,noatime |-/boot /dev/mmcblk0p1 vfat rw,relatime,fmask=0022,dmask=0022,codepage=437,iocharset=ascii,shortname=mixed,errors=remount-ro `-/home/feline2/thinclient_drives xrdp-chansrv fuse.xrdp-chansrv rw,nosuid,nodev,relatime,user_id=1002,group_id=1002 Files in neuralgic directories: /var: 3.6G /var/ 3.1G /var/log 2.9G /var/log/journal/378e881158e14149bc4f8e6771c6d1d7 2.9G /var/log/journal 205M /var/cache Archived and active journals take up 2.8G in the file system. /opt/iobroker/backups: 230M /opt/iobroker/backups/ /opt/iobroker/iobroker-data: 412M /opt/iobroker/iobroker-data/ 310M /opt/iobroker/iobroker-data/files 52M /opt/iobroker/iobroker-data/files/javascript.admin 51M /opt/iobroker/iobroker-data/backup-objects 45M /opt/iobroker/iobroker-data/files/devices.admin/static The five largest files in iobroker-data are: 35M /opt/iobroker/iobroker-data/files/devices.admin/static/js/main.24f2bb56.js.map 23M /opt/iobroker/iobroker-data/states.jsonl 21M /opt/iobroker/iobroker-data/files/web.admin/static/js/main.edf7552a.js.map 20M /opt/iobroker/iobroker-data/objects.jsonl 19M /opt/iobroker/iobroker-data/files/iot.admin/static/js/main.2975a411.js.map USB-Devices by-id: USB-Sticks - Avoid direct links to /dev/* in your adapter setups, please always prefer the links 'by-id': find: '/dev/serial/by-id/': No such file or directory *** NodeJS-Installation *** /usr/bin/nodejs v18.18.2 /usr/bin/node v18.18.2 /usr/bin/npm 9.8.1 /usr/bin/npx 9.8.1 /usr/bin/corepack 0.19.0 nodejs: Installed: 18.18.2-1nodesource1 Candidate: 18.18.2-1nodesource1 Version table: *** 18.18.2-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 100 /var/lib/dpkg/status 18.18.1-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.18.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.17.1-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.17.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.16.1-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.16.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.15.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.14.2-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.14.1-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.14.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.13.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.12.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.11.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.10.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.9.1-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.9.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.8.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.7.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.6.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.5.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.4.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.3.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.2.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.1.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.0.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 12.22.12~dfsg-1~deb11u4 500 500 http://deb.debian.org/debian bullseye/main arm64 Packages 500 http://security.debian.org/debian-security bullseye-security/main arm64 Packages Temp directories causing npm8 problem: 0 No problems detected Errors in npm tree: *** ioBroker-Installation *** ioBroker Status iobroker is running on this host. Objects type: jsonl States type: jsonl Core adapters versions js-controller: 5.0.16 admin: 6.12.0 javascript: 7.1.4 Adapters from github: 8 Adapter State + system.adapter.admin.0 : admin : raspberrypi - enabled, port: 8081, bind: 0.0.0.0, run as: admin + system.adapter.alexa2.0 : alexa2 : raspberrypi - enabled system.adapter.apple-find-me.0 : apple-find-me : raspberrypi - disabled + system.adapter.backitup.0 : backitup : raspberrypi - enabled system.adapter.ble.0 : ble : raspberrypi - disabled system.adapter.daswetter.0 : daswetter : raspberrypi - enabled + system.adapter.denon.0 : denon : raspberrypi - enabled + system.adapter.discovery.0 : discovery : raspberrypi - enabled system.adapter.dwd.0 : dwd : raspberrypi - disabled + system.adapter.energiefluss.0 : energiefluss : raspberrypi - enabled + system.adapter.evcc.0 : evcc : raspberrypi - enabled, port: 7070 system.adapter.flot.0 : flot : raspberrypi - enabled system.adapter.fullybrowser.0 : fullybrowser : raspberrypi - disabled + system.adapter.history.0 : history : raspberrypi - enabled + system.adapter.homeconnect.0 : homeconnect : raspberrypi - enabled system.adapter.ical.0 : ical : raspberrypi - enabled system.adapter.icons-mfd-svg.0 : icons-mfd-svg : raspberrypi - enabled + system.adapter.iot.0 : iot : raspberrypi - enabled + system.adapter.javascript.0 : javascript : raspberrypi - enabled + system.adapter.lgtv.0 : lgtv : raspberrypi - enabled + system.adapter.mediola-gateway.0 : mediola-gateway : raspberrypi - enabled + system.adapter.meross.0 : meross : raspberrypi - enabled system.adapter.modbus.0 : modbus : raspberrypi - disabled system.adapter.mqtt-client.0 : mqtt-client : raspberrypi - disabled, port: 1883 system.adapter.nuki-extended.0 : nuki-extended : raspberrypi - disabled system.adapter.nuki.0 : nuki : raspberrypi - disabled + system.adapter.openligadb.0 : openligadb : raspberrypi - enabled system.adapter.parser.0 : parser : raspberrypi - disabled system.adapter.pegelalarm.0 : pegelalarm : raspberrypi - enabled + system.adapter.pollenflug.0 : pollenflug : raspberrypi - enabled + system.adapter.radar2.0 : radar2 : raspberrypi - enabled + system.adapter.scenes.0 : scenes : raspberrypi - enabled + system.adapter.shelly.0 : shelly : raspberrypi - enabled, port: 1882, bind: 0.0.0.0 + system.adapter.shuttercontrol.0 : shuttercontrol : raspberrypi - enabled + system.adapter.socketio.0 : socketio : raspberrypi - enabled, port: 8084, bind: 0.0.0.0, run as: admin system.adapter.solaredge.0 : solaredge : raspberrypi - disabled + system.adapter.tesla-motors.0 : tesla-motors : raspberrypi - enabled system.adapter.trashschedule.0 : trashschedule : raspberrypi - disabled system.adapter.vis-hqwidgets.0 : vis-hqwidgets : raspberrypi - enabled system.adapter.vis-icontwo.0 : vis-icontwo : raspberrypi - enabled + system.adapter.vis-inventwo.0 : vis-inventwo : raspberrypi - enabled system.adapter.vis-jqui-mfd.0 : vis-jqui-mfd : raspberrypi - enabled system.adapter.vis-map.0 : vis-map : raspberrypi - enabled system.adapter.vis-material-advanced.0 : vis-material-advanced : raspberrypi - enabled system.adapter.vis-materialdesign.0 : vis-materialdesign : raspberrypi - enabled system.adapter.vis-timeandweather.0 : vis-timeandweather : raspberrypi - enabled system.adapter.vis.0 : vis : raspberrypi - enabled + system.adapter.vw-connect.0 : vw-connect : raspberrypi - enabled system.adapter.weatherunderground.0 : weatherunderground : raspberrypi - enabled + system.adapter.web.0 : web : raspberrypi - enabled, port: 8082, bind: 192.168.178.69, run as: admin + system.adapter.webcal.0 : webcal : raspberrypi - enabled + system.adapter.yahka.0 : yahka : raspberrypi - enabled + instance is alive Enabled adapters with bindings + system.adapter.admin.0 : admin : raspberrypi - enabled, port: 8081, bind: 0.0.0.0, run as: admin + system.adapter.evcc.0 : evcc : raspberrypi - enabled, port: 7070 + system.adapter.shelly.0 : shelly : raspberrypi - enabled, port: 1882, bind: 0.0.0.0 + system.adapter.socketio.0 : socketio : raspberrypi - enabled, port: 8084, bind: 0.0.0.0, run as: admin + system.adapter.web.0 : web : raspberrypi - enabled, port: 8082, bind: 192.168.178.69, run as: admin ioBroker-Repositories stable : http://download.iobroker.net/sources-dist.json beta : http://download.iobroker.net/sources-dist-latest.json Active repo(s): stable Installed ioBroker-Instances Used repository: stable Adapter "admin" : 6.12.0 , installed 6.12.0 Adapter "alexa2" : 3.26.1 , installed 3.26.1 Adapter "apple-find-me": 0.0.14 , installed 0.0.14 Adapter "backitup" : 2.8.7 , installed 2.8.7 Adapter "ble" : 0.13.4 , installed 0.13.4 Adapter "bshb" : 0.2.4 , installed 0.2.4 Adapter "cloud" : 4.4.1 , installed 4.4.1 Adapter "daswetter" : 3.1.10 , installed 3.1.10 Adapter "denon" : 1.15.4 , installed 1.15.4 Adapter "devices" : 1.1.5 , installed 1.1.5 Adapter "discovery" : 4.2.0 , installed 3.1.0 [Updatable] Adapter "dwd" : 2.8.5 , installed 2.8.5 Adapter "evcc" : 0.0.10 , installed 0.0.10 Adapter "flot" : 1.12.0 , installed 1.12.0 Adapter "fullybrowser" : 2.2.0 , installed 2.2.0 Adapter "history" : 3.0.1 , installed 3.0.1 Adapter "homeconnect" : 1.1.1 , installed 1.1.1 Adapter "homekit-controller": 0.5.8, installed 0.5.8 Adapter "ical" : 1.13.3 , installed 1.13.3 Adapter "icons-mfd-svg": 1.1.0 , installed 1.1.0 Adapter "iot" : 2.0.11 , installed 1.14.5 [Updatable] Adapter "javascript" : 7.1.4 , installed 7.1.4 Controller "js-controller": 5.0.16 , installed 5.0.16 Adapter "lgtv" : 2.1.2 , installed 2.1.1 [Updatable] Adapter "mediola-gateway": 1.0.1 , installed 1.0.1 Adapter "meross" : 1.15.1 , installed 1.15.1 Adapter "modbus" : 5.0.11 , installed 5.0.11 Adapter "mqtt-client" : 1.6.5 , installed 1.6.5 Adapter "net-tools" : 0.2.0 , installed 0.2.0 Adapter "nuki" : 1.6.0 , installed 1.6.0 Adapter "nuki-extended": 2.6.5 , installed 2.6.5 Adapter "openligadb" : 1.2.4 , installed 1.3.4 Adapter "parser" : 2.0.7 , installed 1.3.2 [Updatable] Adapter "pegelalarm" : 1.3.1 , installed 1.3.1 Adapter "pollenflug" : 1.0.6 , installed 1.0.6 Adapter "radar2" : 2.0.8 , installed 2.0.8 Adapter "scenes" : 2.3.9 , installed 2.3.9 Adapter "shelly" : 6.6.1 , installed 6.6.1 Adapter "shuttercontrol": 1.6.2 , installed 1.6.2 Adapter "simple-api" : 2.7.2 , installed 2.7.2 Adapter "socketio" : 6.5.5 , installed 6.5.5 Adapter "solarviewdatareader": 1.0.7, installed 1.0.7 Adapter "tesla-motors" : 1.3.2 , installed 1.3.2 Adapter "trashschedule": 2.3.0 , installed 2.2.0 [Updatable] Adapter "tvprogram" : 1.1.2 , installed 1.1.2 Adapter "vis" : 1.4.16 , installed 1.4.16 Adapter "vis-hqwidgets": 1.4.0 , installed 1.4.0 Adapter "vis-icontwo" : 0.96.0 , installed 0.96.0 Adapter "vis-inventwo" : 3.3.3 , installed 3.3.3 Adapter "vis-jqui-mfd" : 1.0.12 , installed 1.0.12 Adapter "vis-map" : 1.0.4 , installed 1.0.4 Adapter "vis-material-advanced": 1.7.4, installed 1.7.4 Adapter "vis-timeandweather": 1.2.2, installed 1.2.2 Adapter "vw-connect" : 0.0.67 , installed 0.0.67 Adapter "weatherunderground": 3.6.0, installed 3.6.0 Adapter "web" : 6.1.10 , installed 6.1.2 [Updatable] Adapter "ws" : 2.5.8 , installed 2.5.5 [Updatable] Adapter "yahka" : 1.0.3 , installed 1.0.3 Objects and States Please stand by - This may take a while /Objects: 12529 States: 10686 *** OS-Repositories and Updates *** Hit:1 http://security.debian.org/debian-security bullseye-security InRelease Hit:2 http://deb.debian.org/debian bullseye InRelease Hit:3 http://archive.raspberrypi.org/debian bullseye InRelease Hit:4 http://deb.debian.org/debian bullseye-updates InRelease Get:5 https://dl.cloudsmith.io/public/evcc/stable/deb/debian bullseye InRelease [5127 B] Hit:6 https://deb.nodesource.com/node_18.x nodistro InRelease Fetched 5127 B in 2s (3331 B/s) Reading package lists... Pending Updates: 0 *** Listening Ports *** Active Internet connections (only servers) Proto Recv-Q Send-Q Local Address Foreign Address State User Inode PID/Program name tcp 0 0 0.0.0.0:1882 0.0.0.0:* LISTEN 1001 23905 2764/io.shelly.0 tcp 0 0 0.0.0.0:22 0.0.0.0:* LISTEN 0 12146 652/sshd: /usr/sbin tcp 0 0 192.168.178.69:8082 0.0.0.0:* LISTEN 1001 22476 2840/io.web.0 tcp 0 0 127.0.0.1:9001 0.0.0.0:* LISTEN 1001 23627 2620/iobroker.js-co tcp 0 0 127.0.0.1:9000 0.0.0.0:* LISTEN 1001 23634 2620/iobroker.js-co tcp 0 0 127.0.0.1:631 0.0.0.0:* LISTEN 0 12213 611/cupsd tcp6 0 0 :::38137 :::* LISTEN 1001 27437 3826/io.yahka.0 tcp6 0 0 ::1:631 :::* LISTEN 0 12212 611/cupsd tcp6 0 0 :::4712 :::* LISTEN 116 34678 5241/evcc tcp6 0 0 :::22 :::* LISTEN 0 12148 652/sshd: /usr/sbin tcp6 0 0 :::8081 :::* LISTEN 1001 34899 4873/io.admin.0 tcp6 0 0 :::8084 :::* LISTEN 1001 26414 3842/io.socketio.0 tcp6 0 0 :::3389 :::* LISTEN 117 12250 679/xrdp tcp6 0 0 :::7070 :::* LISTEN 116 37154 5241/evcc tcp6 0 0 :::3000 :::* LISTEN 120 19507 613/grafana tcp6 0 0 ::1:3350 :::* LISTEN 0 11133 645/xrdp-sesman udp 0 0 0.0.0.0:1902 0.0.0.0:* 1001 24557 3407/io.mediola-gat udp 0 0 0.0.0.0:40074 0.0.0.0:* 108 14830 467/avahi-daemon: r udp 0 0 0.0.0.0:41021 0.0.0.0:* 1001 24558 3407/io.mediola-gat udp 0 0 0.0.0.0:67 0.0.0.0:* 1001 22262 2753/io.radar2.0 udp 0 0 0.0.0.0:68 0.0.0.0:* 0 14961 546/dhcpcd udp 0 0 0.0.0.0:631 0.0.0.0:* 0 12230 687/cups-browsed udp 0 0 224.0.0.251:5353 0.0.0.0:* 1002 26205 3418/chromium-brows udp 0 0 0.0.0.0:5353 0.0.0.0:* 108 14828 467/avahi-daemon: r udp6 0 0 :::44206 :::* 108 14831 467/avahi-daemon: r udp6 0 0 :::546 :::* 0 14990 546/dhcpcd udp6 0 0 :::5353 :::* 108 14829 467/avahi-daemon: r ============ Mark until here for C&P ============= iob diag has finished. Press any key for a summary Copy text starting here: ======================= SUMMARY ======================= v.2023-10-10 Static hostname: raspberrypi Icon name: computer Operating System: Debian GNU/Linux 11 (bullseye) Kernel: Linux 6.1.21-v8+ Architecture: arm64 Installation: native Kernel: aarch64 Userland: arm64 Timezone: Europe/Berlin (CET, +0100) User-ID: 1000 /home/iobroker/.diag.sh: line 469: [[: 673 2969: syntax error in expression (error token is "2969") X-Server: false Boot Target: graphical.target Pending OS-Updates: 0 Pending iob updates: 7 Nodejs-Installation: /usr/bin/nodejs v18.18.2 /usr/bin/node v18.18.2 /usr/bin/npm 9.8.1 /usr/bin/npx 9.8.1 /usr/bin/corepack 0.19.0 Recommended versions are nodejs 18.18.2 and npm 9.8.1 Your nodejs installation is correct MEMORY: total used free shared buff/cache available Mem: 7.8G 2.4G 3.9G 73M 1.5G 5.2G Swap: 99M 0B 99M Total: 7.9G 2.4G 4.0G Active iob-Instances: 28 Active repo(s): stable ioBroker Core: js-controller 5.0.16 admin 6.12.0 ioBroker Status: iobroker is running on this host. Objects type: jsonl States type: jsonl Status admin and web instance: + system.adapter.admin.0 : admin : raspberrypi - enabled, port: 8081, bind: 0.0.0.0, run as: admin + system.adapter.web.0 : web : raspberrypi - enabled, port: 8082, bind: 192.168.178.69, run as: admin + system.adapter.webcal.0 : webcal : raspberrypi - enabled Objects: 12529 States: 10686 Size of iob-Database: 20M /opt/iobroker/iobroker-data/objects.jsonl 23M /opt/iobroker/iobroker-data/states.jsonl =================== END OF SUMMARY ==================== === Mark text until here for copying === -
@line der admin ist ja schon wieder deaktiviert!
warum?edit
im diag ist er aktiv -
@line sagte in Iobroker nicht mehr erreichbar - Firewall?:
pc sieht es immer noch nicht besser aus
Browsercache gelöscht?
-
sudo systemctl set-default multi-user.target sudo systemctl isolate multi-user.targetDer web-Adapter hat auch noch ein Binding...
+ system.adapter.web.0 : web : raspberrypi - enabled, port: 8082, bind: 192.168.178.69, run as: adminBring die Adapter auf Stand:
Pending iob updates: 7
