Iobroker startet nicht mehr nach Restore
-
@thomas-braun said in Iobroker startet nicht mehr nach Restore:
@bill-s-preston sagte in Iobroker startet nicht mehr nach Restore:
Time zone: Europe/London (BST, +0100)Vermutlich falsch. Stell das auf deine richtige Zeitzone ein.
+-- iobroker.sourceanalytix@0.4.8-alpha.2 (git+ssh://git@github.com/iobroker-community-adapters/ioBroker.sourceanalytix.git#eacbbdeadf4c4bd44636743bc6f52dd21c6f0766)
Bring das auf die Beta-Version.
Bring die ganzen Adapter auf eine aktuelle Basis.
Offenbar läuft das Backup aber noch, das LogFile sieht mir danach aus.
Sehr merkwürdig. Das alte System hat Europe/Berlin eingestellt.
Aber bitte für Blöde erklären was muss ich genau für Kommandos eingeben?
-
@bill-s-preston sagte in Iobroker startet nicht mehr nach Restore:
Sehr merkwürdig. Das alte System hat Europe/Berlin eingestellt.
Das muss natürlich auf dem neuen System wieder eingestellt werden. Das ist eine Einstellung im Betriebssystem, die wird nicht gebackupt.
sudo timedatectl set-timezone "Europe/Berlin"Oder in welchem Land du auch lebst.
-
herke@raspberrypi:~ $ sudo timedatectl set-timezone "Europe/Berlin" herke@raspberrypi:~ $ date Mon 6 May 12:10:44 CEST 2024Startet aber immer noch nicht
-
@bill-s-preston sagte in Iobroker startet nicht mehr nach Restore:
Startet aber immer noch nicht
Ist denn jetzt Ruhe im LogFile?
-
@bill-s-preston sagte in Iobroker startet nicht mehr nach Restore:
warn: host.raspberrypi startInstance cannot find adapter "sayit@1.12.3". Try to install it... 4 attempt
diese log Zeilen zeigen dass der Restore noch läuft.
In dieser Zeit darf nichts an ioBroker verändert werden, weil es sonst dazu kommen kann, dass der Restore in einem undefinierten Zustand hängen bleibt.der 4. Versuch deutet aber schon darauf hin, dass etwas nicht stimmt.
Möglicherweise etwas im Unterbau oder in anderen Abhängigkeiten, die nicht auf dem aktuellen Stand sind.
-
@thomas-braun said in Iobroker startet nicht mehr nach Restore:
@bill-s-preston sagte in Iobroker startet nicht mehr nach Restore:
Startet aber immer noch nicht
Ist denn jetzt Ruhe im LogFile?
Skript v.2024-04-21 *** BASE SYSTEM *** Static hostname: raspberrypi Icon name: computer Operating System: Debian GNU/Linux 12 (bookworm) Kernel: Linux 6.6.28+rpt-rpi-v8 Architecture: arm64 Model : Raspberry Pi 4 Model B Rev 1.5 Docker : false Virtualization : none Kernel : aarch64 Userland : 64 bit Systemuptime and Load: 13:30:19 up 3:02, 2 users, load average: 0.19, 0.16, 0.11 CPU threads: 4 *** RASPBERRY THROTTLING *** Current issues: No throttling issues detected. Previously detected issues: No throttling issues detected. *** Time and Time Zones *** Local time: Mon 2024-05-06 13:30:19 CEST Universal time: Mon 2024-05-06 11:30:19 UTC RTC time: n/a Time zone: Europe/Berlin (CEST, +0200) System clock synchronized: yes NTP service: active RTC in local TZ: no *** Users and Groups *** User that called 'iob diag': herke HOME=/home/herke GROUPS=herke adm dialout cdrom sudo audio video plugdev games users input render netdev gpio i2c spi iobroker User that is running 'js-controller': iobroker HOME=/home/iobroker GROUPS=iobroker tty dialout audio video plugdev bluetooth gpio i2c *** Display-Server-Setup *** pgrep: pattern that searches for process name longer than 15 characters will result in zero matches Try `pgrep -f' option to match against the complete command line. Display-Server: false Desktop: Terminal: tty Boot Target: multi-user.target *** MEMORY *** total used free shared buff/cache available Mem: 4.0G 645M 1.4G 1.2M 1.9G 3.3G Swap: 104M 0B 104M Total: 4.1G 645M 1.5G Active iob-Instances: 3 3792 M total memory 615 M used memory 916 M active memory 1297 M inactive memory 1343 M free memory 135 M buffer memory 1636 M swap cache 99 M total swap 0 M used swap 99 M free swap *** top - Table Of Processes *** top - 13:30:19 up 3:02, 2 users, load average: 0.19, 0.16, 0.11 Tasks: 166 total, 1 running, 165 sleeping, 0 stopped, 0 zombie %Cpu(s): 0.0 us, 25.0 sy, 0.0 ni, 75.0 id, 0.0 wa, 0.0 hi, 0.0 si, 0.0 st MiB Mem : 3792.1 total, 1343.2 free, 615.5 used, 1772.0 buff/cache MiB Swap: 100.0 total, 100.0 free, 0.0 used. 3176.5 avail Mem *** FAILED SERVICES *** UNIT LOAD ACTIVE SUB DESCRIPTION * motioneye.service loaded failed failed motionEye Server LOAD = Reflects whether the unit definition was properly loaded. ACTIVE = The high-level unit activation state, i.e. generalization of SUB. SUB = The low-level unit activation state, values depend on unit type. 1 loaded units listed. *** FILESYSTEM *** Filesystem Type Size Used Avail Use% Mounted on udev devtmpfs 1.6G 0 1.6G 0% /dev tmpfs tmpfs 380M 1.2M 379M 1% /run /dev/mmcblk0p2 ext4 117G 7.7G 104G 7% / tmpfs tmpfs 1.9G 0 1.9G 0% /dev/shm tmpfs tmpfs 5.0M 16K 5.0M 1% /run/lock /dev/mmcblk0p1 vfat 510M 64M 447M 13% /boot/firmware tmpfs tmpfs 380M 0 380M 0% /run/user/1000 Messages concerning ext4 filesystem in dmesg: [Mon May 6 10:27:24 2024] Kernel command line: coherent_pool=1M 8250.nr_uarts=0 snd_bcm2835.enable_headphones=0 snd_bcm2835.enable_headphones=1 snd_bcm2835.enable_hdmi=1 snd_bcm2835.enable_hdmi=0 smsc95xx.macaddr=D8:3A:DD:96:C0:F6 vc_mem.mem_base=0x3ec00000 vc_mem.mem_size=0x40000000 console=ttyS0,115200 console=tty1 root=PARTUUID=03edf4a5-02 rootfstype=ext4 fsck.repair=yes rootwait cfg80211.ieee80211_regdom=DE [Mon May 6 10:27:26 2024] EXT4-fs (mmcblk0p2): mounted filesystem 93c89e92-8f2e-4522-ad32-68faed883d2f ro with ordered data mode. Quota mode: none. [Mon May 6 10:27:28 2024] EXT4-fs (mmcblk0p2): re-mounted 93c89e92-8f2e-4522-ad32-68faed883d2f r/w. Quota mode: none. Show mounted filesystems: TARGET SOURCE FSTYPE OPTIONS / /dev/mmcblk0p2 ext4 rw,noatime |-/sys sysfs sysfs rw,nosuid,nodev,noexec,relatime | |-/sys/kernel/security securityfs securityfs rw,nosuid,nodev,noexec,relatime | |-/sys/fs/cgroup cgroup2 cgroup2 rw,nosuid,nodev,noexec,relatime,nsdelegate,memory_recursiveprot | |-/sys/fs/pstore pstore pstore rw,nosuid,nodev,noexec,relatime | |-/sys/fs/bpf bpf bpf rw,nosuid,nodev,noexec,relatime,mode=700 | |-/sys/kernel/debug debugfs debugfs rw,nosuid,nodev,noexec,relatime | |-/sys/kernel/tracing tracefs tracefs rw,nosuid,nodev,noexec,relatime | |-/sys/fs/fuse/connections fusectl fusectl rw,nosuid,nodev,noexec,relatime | `-/sys/kernel/config configfs configfs rw,nosuid,nodev,noexec,relatime |-/proc proc proc rw,relatime | `-/proc/sys/fs/binfmt_misc systemd-1 autofs rw,relatime,fd=30,pgrp=1,timeout=0,minproto=5,maxproto=5,direct,pipe_ino=2600 | `-/proc/sys/fs/binfmt_misc binfmt_misc binfmt_misc rw,nosuid,nodev,noexec,relatime |-/dev udev devtmpfs rw,nosuid,relatime,size=1671304k,nr_inodes=417826,mode=755 | |-/dev/pts devpts devpts rw,nosuid,noexec,relatime,gid=5,mode=620,ptmxmode=000 | |-/dev/shm tmpfs tmpfs rw,nosuid,nodev | `-/dev/mqueue mqueue mqueue rw,nosuid,nodev,noexec,relatime |-/run tmpfs tmpfs rw,nosuid,nodev,noexec,relatime,size=388308k,mode=755 | |-/run/lock tmpfs tmpfs rw,nosuid,nodev,noexec,relatime,size=5120k | |-/run/credentials/systemd-sysctl.service ramfs ramfs ro,nosuid,nodev,noexec,relatime,mode=700 | |-/run/credentials/systemd-sysusers.service ramfs ramfs ro,nosuid,nodev,noexec,relatime,mode=700 | |-/run/credentials/systemd-tmpfiles-setup-dev.service ramfs ramfs ro,nosuid,nodev,noexec,relatime,mode=700 | |-/run/rpc_pipefs sunrpc rpc_pipefs rw,relatime | |-/run/credentials/systemd-tmpfiles-setup.service ramfs ramfs ro,nosuid,nodev,noexec,relatime,mode=700 | `-/run/user/1000 tmpfs tmpfs rw,nosuid,nodev,relatime,size=388304k,nr_inodes=97076,mode=700,uid=1000,gid=1000 `-/boot/firmware /dev/mmcblk0p1 vfat rw,relatime,fmask=0022,dmask=0022,codepage=437,iocharset=ascii,shortname=mixed,errors=remount-ro Files in neuralgic directories: /var: 1.9G /var/ 1.3G /var/lib 1.1G /var/lib/influxdb/data 1.1G /var/lib/influxdb 1015M /var/lib/influxdb/data/iobroker/autogen Archived and active journals take up 167.7M in the file system. /opt/iobroker/backups: 522M /opt/iobroker/backups/ /opt/iobroker/iobroker-data: 230M /opt/iobroker/iobroker-data/ 156M /opt/iobroker/iobroker-data/files 60M /opt/iobroker/iobroker-data/backup-objects 51M /opt/iobroker/iobroker-data/files/javascript.admin 32M /opt/iobroker/iobroker-data/files/javascript.admin/static/js The five largest files in iobroker-data are: 13M /opt/iobroker/iobroker-data/objects.jsonl 9.7M /opt/iobroker/iobroker-data/files/text2command.admin/static/js/main.bbfeb1bf.js.map 6.9M /opt/iobroker/iobroker-data/files/javascript.admin/static/js/610.de0231c9.chunk.js.map 6.3M /opt/iobroker/iobroker-data/files/admin.admin/custom/static/js/vendors-node_modules_iobroker_adapter-react-v5_assets_devices_parseNames_js-node_modules_iobr-99c23e.847b8ad9.chunk.js.map 5.4M /opt/iobroker/iobroker-data/files/vis.0/b6ea130ac9bab9d0acefae88e9ab7ce5.gif USB-Devices by-id: USB-Sticks - Avoid direct links to /dev/tty* in your adapter setups, please always prefer the links 'by-id': No Devices found 'by-id' HINT: Your zigbee.1 COM-Port is NOT matching 'by-id'. Please check your setting: /dev/ttyACM0 *** NodeJS-Installation *** /usr/bin/nodejs v18.20.2 /usr/bin/node v18.20.2 /usr/bin/npm 10.5.0 /usr/bin/npx 10.5.0 /usr/bin/corepack 0.25.2 nodejs: Installed: 18.20.2-1nodesource1 Candidate: 18.20.2-1nodesource1 Version table: *** 18.20.2-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 100 /var/lib/dpkg/status 18.20.1-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.20.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.19.1-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.19.0+dfsg-6~deb12u1 500 500 http://deb.debian.org/debian-security bookworm-security/main arm64 Packages 18.19.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.18.2-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.18.1-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.18.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.17.1-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.17.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.16.1-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.16.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.15.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.14.2-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.14.1-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.14.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.13.0+dfsg1-1 500 500 http://deb.debian.org/debian bookworm/main arm64 Packages 18.13.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.12.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.11.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.10.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.9.1-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.9.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.8.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.7.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.6.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.5.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.4.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.3.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.2.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.1.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.0.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages Temp directories causing npm8 problem: 0 No problems detected Errors in npm tree: *** ioBroker-Installation *** ioBroker Status iobroker is running on this host. Objects type: jsonl States type: jsonl Core adapters versions js-controller: 5.0.19 admin: 6.10.1 javascript: 6.1.4 nodejs modules from github: 1 +-- iobroker.sourceanalytix@0.4.8-alpha.2 (git+ssh://git@github.com/iobroker-community-adapters/ioBroker.sourceanalytix.git#eacbbdeadf4c4bd44636743bc6f52dd21c6f0766) Adapter State + system.adapter.admin.0 : admin : raspberrypi - enabled, port: 8081, bind: 0.0.0.0, run as: admin system.adapter.backitup.0 : backitup : raspberrypi - disabled system.adapter.discovery.0 : discovery : raspberrypi - disabled system.adapter.dwd.0 : dwd : raspberrypi - disabled system.adapter.email.0 : email : raspberrypi - disabled system.adapter.fullybrowser.0 : fullybrowser : raspberrypi - disabled system.adapter.hm-rega.0 : hm-rega : raspberrypi - disabled system.adapter.hm-rpc.0 : hm-rpc : raspberrypi - disabled, port: 0 system.adapter.hm-rpc.1 : hm-rpc : raspberrypi - disabled, port: 0 system.adapter.hm-rpc.2 : hm-rpc : raspberrypi - disabled, port: 0 system.adapter.hm-rpc.3 : hm-rpc : raspberrypi - disabled, port: 0 system.adapter.ical.0 : ical : raspberrypi - disabled system.adapter.icons-mfd-svg.0 : icons-mfd-svg : raspberrypi - disabled system.adapter.influxdb.0 : influxdb : raspberrypi - disabled, port: 8086 system.adapter.javascript.0 : javascript : raspberrypi - disabled + system.adapter.lgtv.0 : lgtv : raspberrypi - enabled system.adapter.meross.0 : meross : raspberrypi - disabled system.adapter.mihome-vacuum.0 : mihome-vacuum : raspberrypi - disabled, port: 54321 system.adapter.mqtt.0 : mqtt : raspberrypi - disabled, port: 1882, bind: 192.168.178.23 system.adapter.mqtt.1 : mqtt : raspberrypi - disabled, port: 1886, bind: 0.0.0.0 system.adapter.onvif.0 : onvif : raspberrypi - disabled system.adapter.openweathermap.0 : openweathermap : raspberrypi - disabled system.adapter.pushover.0 : pushover : raspberrypi - disabled system.adapter.rpi2.0 : rpi2 : raspberrypi - disabled system.adapter.sayit.0 : sayit : raspberrypi - disabled, port: 0 system.adapter.shelly.0 : shelly : raspberrypi - disabled, port: 1883 system.adapter.sonoff.0 : sonoff : raspberrypi - disabled, port: 1884, bind: 0.0.0.0 system.adapter.sourceanalytix.0 : sourceanalytix : raspberrypi - disabled system.adapter.telegram.0 : telegram : raspberrypi - disabled, port: 8443, bind: 0.0.0.0 system.adapter.text2command.0 : text2command : raspberrypi - disabled system.adapter.tr-064.0 : tr-064 : raspberrypi - disabled system.adapter.vis-hqwidgets.0 : vis-hqwidgets : raspberrypi - disabled system.adapter.vis-icontwo.0 : vis-icontwo : raspberrypi - disabled system.adapter.vis-inventwo.0 : vis-inventwo : raspberrypi - disabled system.adapter.vis-jqui-mfd.0 : vis-jqui-mfd : raspberrypi - disabled system.adapter.vis-justgage.0 : vis-justgage : raspberrypi - disabled system.adapter.vis-material-advanced.0 : vis-material-advanced : raspberrypi - disabled system.adapter.vis-timeandweather.0 : vis-timeandweather : raspberrypi - disabled system.adapter.vis-weather.0 : vis-weather : raspberrypi - disabled system.adapter.vis.0 : vis : raspberrypi - disabled system.adapter.web.0 : web : raspberrypi - disabled, port: 8082, bind: 0.0.0.0, run as: admin system.adapter.worx.0 : worx : raspberrypi - disabled system.adapter.zigbee.1 : zigbee : raspberrypi - disabled, port: /dev/ttyACM0 + instance is alive Enabled adapters with bindings + system.adapter.admin.0 : admin : raspberrypi - enabled, port: 8081, bind: 0.0.0.0, run as: admin ioBroker-Repositories Stable (default): http://download.iobroker.net/sources-dist.json Beta (latest) : http://download.iobroker.net/sources-dist-latest.json Active repo(s): Stable (default) Installed ioBroker-Instances Used repository: Stable (default) Adapter "admin" : 6.13.16 , installed 6.10.1 [Updatable] Adapter "backitup" : 2.11.0 , installed 2.6.19 [Updatable] Adapter "discovery" : 4.4.0 , installed 2.6.1 [Updatable] Adapter "dwd" : 2.8.5 , installed 2.8.3 [Updatable] Adapter "email" : 1.2.2 , installed 1.0.9 [Updatable] Adapter "fullybrowser" : 3.0.12 , installed 2.1.2 [Updatable] Adapter "hm-rega" : 4.0.0 , installed 3.0.43 [Updatable] Adapter "hm-rpc" : 1.17.0 , installed 1.15.16 [Updatable] Adapter "ical" : 1.14.3 , installed 1.7.4 [Updatable] Adapter "icons-mfd-svg": 1.2.0 , installed 1.0.2 [Updatable] Adapter "influxdb" : 4.0.2 , installed 4.0.2 Adapter "javascript" : 7.8.0 , installed 6.1.4 [Updatable] Controller "js-controller": 5.0.19 , installed 5.0.19 Adapter "lgtv" : 2.2.0 , installed 2.1.1 [Updatable] Adapter "meross" : 1.17.0 , installed 1.17.0 Adapter "mqtt" : 5.2.0 , installed 2.4.0 [Updatable] Adapter "onvif" : 1.1.3 , installed 0.4.4 [Updatable] Adapter "openweathermap": 1.0.4 , installed 0.3.3 [Updatable] Adapter "pushover" : 3.0.6 , installed 3.0.3 [Updatable] Adapter "rpi2" : 1.3.2 , installed 1.3.2 Adapter "shelly" : 6.9.0 , installed 6.3.1 [Updatable] Adapter "simple-api" : 2.7.2 , installed 2.7.2 Adapter "socketio" : 6.7.0 , installed 6.7.0 Adapter "sonoff" : 3.0.3 , installed 2.5.3 [Updatable] Adapter "telegram" : 3.2.1 , installed 1.8.1 [Updatable] Adapter "text2command" : 3.0.3 , installed 2.3.0 [Updatable] Adapter "tr-064" : 4.2.18 , installed 4.2.18 Adapter "vis" : 1.5.4 , installed 1.5.4 Adapter "vis-hqwidgets": 1.5.1 , installed 1.3.0 [Updatable] Adapter "vis-icontwo" : 1.5.0 , installed 0.93.0 [Updatable] Adapter "vis-inventwo" : 3.3.4 , installed 3.3.3 [Updatable] Adapter "vis-jqui-mfd" : 1.1.1 , installed 1.0.12 [Updatable] Adapter "vis-justgage" : 2.1.7 , installed 1.0.2 [Updatable] Adapter "vis-material-advanced": 1.7.4, installed 1.7.2 [Updatable] Adapter "vis-timeandweather": 1.2.2, installed 1.2.2 Adapter "vis-weather" : 2.5.9 , installed 2.5.6 [Updatable] Adapter "web" : 6.2.5 , installed 3.4.1 [Updatable] Adapter "worx" : 2.3.4 , installed 2.3.4 Adapter "zigbee" : 1.10.3 , installed 1.8.23 [Updatable] Objects and States Please stand by - This may take a while Objects: 11123 States: 9533 *** OS-Repositories and Updates *** Hit:1 http://deb.debian.org/debian bookworm InRelease Hit:2 http://deb.debian.org/debian-security bookworm-security InRelease Hit:3 https://repos.influxdata.com/debian stable InRelease Hit:4 http://archive.raspberrypi.com/debian bookworm InRelease Hit:5 http://deb.debian.org/debian bookworm-updates InRelease Hit:6 https://apt.grafana.com stable InRelease Hit:7 https://deb.nodesource.com/node_18.x nodistro InRelease Reading package lists... Pending Updates: 0 *** Listening Ports *** Active Internet connections (only servers) Proto Recv-Q Send-Q Local Address Foreign Address State User Inode PID/Program name tcp 0 0 127.0.0.1:8088 0.0.0.0:* LISTEN 106 5713 743/influxd tcp 0 0 127.0.0.1:8080 0.0.0.0:* LISTEN 108 5653 676/motion tcp 0 0 127.0.0.1:8081 0.0.0.0:* LISTEN 108 5652 676/motion tcp 0 0 127.0.0.1:9000 0.0.0.0:* LISTEN 1001 16833 4001/iobroker.js-co tcp 0 0 127.0.0.1:9001 0.0.0.0:* LISTEN 1001 16826 4001/iobroker.js-co tcp 0 0 0.0.0.0:22 0.0.0.0:* LISTEN 0 5621 680/sshd: /usr/sbin tcp6 0 0 :::8086 :::* LISTEN 106 7269 743/influxd tcp6 0 0 :::8082 :::* LISTEN 1001 14053 4026/io.admin.0 tcp6 0 0 :::3000 :::* LISTEN 107 7286 791/grafana tcp6 0 0 :::22 :::* LISTEN 0 5623 680/sshd: /usr/sbin udp 0 0 0.0.0.0:5353 0.0.0.0:* 104 4077 510/avahi-daemon: r udp 0 0 0.0.0.0:34505 0.0.0.0:* 104 4079 510/avahi-daemon: r udp6 0 0 :::5353 :::* 104 4078 510/avahi-daemon: r udp6 0 0 :::38276 :::* 104 4080 510/avahi-daemon: r *** Log File - Last 25 Lines *** 2024-05-06 09:53:01.366 - error: host.raspberrypi iobroker npm-install: npm ERR! code 127npm ERR! path /opt/iobroker/node_modules/zlibnpm ERR! command failednpm ERR! command sh -c node-waf clean || true; node-waf configure buildnpm ERR! sh: 1: node-waf: not foundnpm ERR! sh: 1: node-waf: not foundnpm ERR! A complete log of this run can be found in: /home/iobroker/.npm/_logs/2024-05-06T08_52_52_262Z-debug-0.log 2024-05-06 09:53:01.367 - error: host.raspberrypi iobroker npm-install: host.raspberrypi Cannot install iobroker.mihome-vacuum@4.0.0: 127 2024-05-06 09:53:02.393 - info: host.raspberrypi iobroker npm-install: exit 25 2024-05-06 09:53:03.395 - warn: host.raspberrypi startInstance cannot find adapter "sayit@1.12.3". Try to install it... 3 attempt 2024-05-06 09:53:03.395 - info: host.raspberrypi iobroker install sayit@1.12.3 using installedVersion 2024-05-06 09:53:06.574 - info: host.raspberrypi iobroker npm-install: NPM version: 10.5.0 2024-05-06 09:53:06.577 - info: host.raspberrypi iobroker npm-install: Installing iobroker.sayit@1.12.3... (System call) 2024-05-06 09:53:23.146 - error: host.raspberrypi iobroker npm-install: npm ERR! code 1npm ERR! path /opt/iobroker/node_modules/iobroker.sayitnpm ERR! command failednpm ERR! command sh -c node main.js --installnpm ERR! node:internal/modules/cjs/loader:1143npm ERR! throw err;npm ERR! ^npm ERR! npm ERR! Error: Cannot find module '/opt/iobroker/node_modules/iobroker.js-controller/lib/tools'npm ERR! Require stack:npm ERR! - /opt/iobroker/node_modules/iobroker.sayit/main.jsnpm ERR! at Module._resolveFilename (node:internal/modules/cjs/loader:1140:15)npm ERR! at Module._load (node:internal/modules/cjs/loader:981:27)npm ERR! at Module.require (node:internal/modules/cjs/loader:1231:19)npm ERR! at require (node:internal/modules/helpers:177:18)npm ERR! at Object.<anonymous> (/opt/iobroker/node_modules/iobroker.sayit/main.js:17:61)npm ERR! at Module._compile (node:internal/modules/cjs/loader:1364:14)npm ERR! at Module._extensions..js (node:internal/modules/cjs/loader:1422:10)npm ERR! at Module.load (node:internal/modules/cjs/loader:1203:32)npm ERR! at Module._load (node:internal/modules/cjs/loader:1019:12)npm ERR! at Function.executeUserEntryPoint [as runMain] (node:internal/modules/run_main:128:12) {npm ERR! code: 'MODULE_NOT_FOUND',npm ERR! requireStack: [ '/opt/iobroker/node_modules/iobroker.sayit/main.js' ]npm ERR! }npm ERR! npm ERR! Node.js v18.20.2npm ERR! A complete log of this run can be found in: /home/iobroker/.npm/_logs/2024-05-06T08_53_07_316Z-debug-0.loghost.raspberrypi Cannot install iobroker.sayit@1.12.3: 1 2024-05-06 09:53:24.175 - info: host.raspberrypi iobroker npm-install: exit 25 2024-05-06 09:53:25.176 - warn: host.raspberrypi startInstance cannot find adapter "mihome-vacuum@4.0.0". Try to install it... 4 attempt 2024-05-06 09:53:25.177 - info: host.raspberrypi iobroker install mihome-vacuum@4.0.0 using installedVersion 2024-05-06 09:53:28.336 - info: host.raspberrypi iobroker npm-install: NPM version: 10.5.0 2024-05-06 09:53:28.339 - info: host.raspberrypi iobroker npm-install: Installing iobroker.mihome-vacuum@4.0.0... (System call) 2024-05-06 09:53:38.098 - error: host.raspberrypi iobroker npm-install: npm ERR! code 127npm ERR! path /opt/iobroker/node_modules/zlibnpm ERR! command failednpm ERR! command sh -c node-waf clean || true; node-waf configure buildnpm ERR! sh: 1: node-waf: not foundnpm ERR! sh: 1: node-waf: not foundnpm ERR! A complete log of this run can be found in: /home/iobroker/.npm/_logs/2024-05-06T08_53_29_042Z-debug-0.log 2024-05-06 09:53:38.099 - error: host.raspberrypi iobroker npm-install: host.raspberrypi Cannot install iobroker.mihome-vacuum@4.0.0: 127 2024-05-06 09:53:39.125 - info: host.raspberrypi iobroker npm-install: exit 25 2024-05-06 09:53:40.126 - warn: host.raspberrypi startInstance cannot find adapter "sayit@1.12.3". Try to install it... 4 attempt 2024-05-06 09:53:40.127 - info: host.raspberrypi iobroker install sayit@1.12.3 using installedVersion 2024-05-06 09:53:43.281 - info: host.raspberrypi iobroker npm-install: NPM version: 10.5.0 2024-05-06 09:53:43.283 - info: host.raspberrypi iobroker npm-install: Installing iobroker.sayit@1.12.3... (System call) 2024-05-06 09:53:59.969 - error: host.raspberrypi iobroker npm-install: npm ERR! code 1npm ERR! path /opt/iobroker/node_modules/iobroker.sayitnpm ERR! command failednpm ERR! command sh -c node main.js --installnpm ERR! node:internal/modules/cjs/loader:1143npm ERR! throw err;npm ERR! ^npm ERR! npm ERR! Error: Cannot find module '/opt/iobroker/node_modules/iobroker.js-controller/lib/tools'npm ERR! Require stack:npm ERR! - /opt/iobroker/node_modules/iobroker.sayit/main.jsnpm ERR! at Module._resolveFilename (node:internal/modules/cjs/loader:1140:15)npm ERR! at Module._load (node:internal/modules/cjs/loader:981:27)npm ERR! at Module.require (node:internal/modules/cjs/loader:1231:19)npm ERR! at require (node:internal/modules/helpers:177:18)npm ERR! at Object.<anonymous> (/opt/iobroker/node_modules/iobroker.sayit/main.js:17:61)npm ERR! at Module._compile (node:internal/modules/cjs/loader:1364:14)npm ERR! at Module._extensions..js (node:internal/modules/cjs/loader:1422:10)npm ERR! at Module.load (node:internal/modules/cjs/loader:1203:32)npm ERR! at Module._load (node:internal/modules/cjs/loader:1019:12)npm ERR! at Function.executeUserEntryPoint [as runMain] (node:internal/modules/run_main:128:12) {npm ERR! code: 'MODULE_NOT_FOUND',npm ERR! requireStack: [ '/opt/iobroker/node_modules/iobroker.sayit/main.js' ]npm ERR! }npm ERR! npm ERR! Node.js v18.20.2npm ERR! A complete log of this run can be found in: /home/iobroker/.npm/_logs/2024-05-06T08_53_43_983Z-debug-0.log 2024-05-06 09:53:59.969 - error: host.raspberrypi iobroker npm-install: host.raspberrypi Cannot install iobroker.sayit@1.12.3: 1 2024-05-06 09:54:00.997 - info: host.raspberrypi iobroker npm-install: exit 25 2024-05-06 09:54:01.998 - error: host.raspberrypi Cannot download and install adapter "mihome-vacuum@4.0.0". To retry it disable/enable the adapter or restart host. Also check the error messages in the log! 2024-05-06 09:54:02.500 - error: host.raspberrypi Cannot download and install adapter "sayit@1.12.3". To retry it disable/enable the adapter or restart host. Also check the error messages in the log!So sieht es jetzt aus. Die Zeit wurde anscheienend eingestellt
-
@homoran said in Iobroker startet nicht mehr nach Restore:
@bill-s-preston sagte in Iobroker startet nicht mehr nach Restore:
warn: host.raspberrypi startInstance cannot find adapter "sayit@1.12.3". Try to install it... 4 attempt
diese log Zeilen zeigen dass der Restore noch läuft.
In dieser Zeit darf nichts an ioBroker verändert werden, weil es sonst dazu kommen kann, dass der Restore in einem undefinierten Zustand hängen bleibt.der 4. Versuch deutet aber schon darauf hin, dass etwas nicht stimmt.
Möglicherweise etwas im Unterbau oder in anderen Abhängigkeiten, die nicht auf dem aktuellen Stand sind.
Hilft es den Iobroker nochmal zu löschen und den Restor nochmal auszuführen?
Wie bringe ich sourceanalytix auf die Beta ?
-
iob update iob upgrade all -y -
@bill-s-preston sagte in Iobroker startet nicht mehr nach Restore:
So sieht es jetzt aus.
letzte Aktion um 09:54??
vor fast 4 Stunden? -
@homoran said in Iobroker startet nicht mehr nach Restore:
@bill-s-preston sagte in Iobroker startet nicht mehr nach Restore:
So sieht es jetzt aus.
letzte Aktion um 09:54??
vor fast 4 Stunden?Ja das passt
-
@thomas-braun said in Iobroker startet nicht mehr nach Restore:
iob update iob upgrade all -yLäuft. Dauert etwas...
-
@bill-s-preston sagte in Iobroker startet nicht mehr nach Restore:
Dauert etwas...
Klar, bei 29 Adaptern...
-
So, update ist fertig. Auch nach nem reboot des Systems ist der Broker still.
-
-
@thomas-braun said in Iobroker startet nicht mehr nach Restore:
iob diagsagt?
Skript v.2024-04-21 *** BASE SYSTEM *** Static hostname: raspberrypi Icon name: computer Operating System: Debian GNU/Linux 12 (bookworm) Kernel: Linux 6.6.28+rpt-rpi-v8 Architecture: arm64 Model : Raspberry Pi 4 Model B Rev 1.5 Docker : false Virtualization : none Kernel : aarch64 Userland : 64 bit Systemuptime and Load: 14:34:15 up 4 min, 2 users, load average: 0.83, 0.74, 0.33 CPU threads: 4 *** RASPBERRY THROTTLING *** Current issues: No throttling issues detected. Previously detected issues: No throttling issues detected. *** Time and Time Zones *** Local time: Mon 2024-05-06 14:34:15 CEST Universal time: Mon 2024-05-06 12:34:15 UTC RTC time: n/a Time zone: Europe/Berlin (CEST, +0200) System clock synchronized: yes NTP service: active RTC in local TZ: no *** Users and Groups *** User that called 'iob diag': herke HOME=/home/herke GROUPS=herke adm dialout cdrom sudo audio video plugdev games users input render netdev gpio i2c spi iobroker User that is running 'js-controller': iobroker HOME=/home/iobroker GROUPS=iobroker tty dialout audio video plugdev bluetooth gpio i2c *** Display-Server-Setup *** pgrep: pattern that searches for process name longer than 15 characters will result in zero matches Try `pgrep -f' option to match against the complete command line. Display-Server: false Desktop: Terminal: tty Boot Target: multi-user.target *** MEMORY *** total used free shared buff/cache available Mem: 4.0G 641M 2.7G 1.2M 669M 3.3G Swap: 104M 0B 104M Total: 4.1G 641M 2.8G Active iob-Instances: 3 3792 M total memory 612 M used memory 871 M active memory 200 M inactive memory 2613 M free memory 64 M buffer memory 573 M swap cache 99 M total swap 0 M used swap 99 M free swap *** top - Table Of Processes *** top - 14:34:16 up 4 min, 2 users, load average: 0.83, 0.74, 0.33 Tasks: 186 total, 2 running, 184 sleeping, 0 stopped, 0 zombie %Cpu(s): 0.0 us, 0.0 sy, 0.0 ni,100.0 id, 0.0 wa, 0.0 hi, 0.0 si, 0.0 st MiB Mem : 3792.1 total, 2612.8 free, 613.1 used, 638.6 buff/cache MiB Swap: 100.0 total, 100.0 free, 0.0 used. 3178.9 avail Mem *** FAILED SERVICES *** UNIT LOAD ACTIVE SUB DESCRIPTION * motioneye.service loaded failed failed motionEye Server LOAD = Reflects whether the unit definition was properly loaded. ACTIVE = The high-level unit activation state, i.e. generalization of SUB. SUB = The low-level unit activation state, values depend on unit type. 1 loaded units listed. *** FILESYSTEM *** Filesystem Type Size Used Avail Use% Mounted on udev devtmpfs 1.6G 0 1.6G 0% /dev tmpfs tmpfs 380M 1.2M 379M 1% /run /dev/mmcblk0p2 ext4 117G 8.1G 103G 8% / tmpfs tmpfs 1.9G 0 1.9G 0% /dev/shm tmpfs tmpfs 5.0M 16K 5.0M 1% /run/lock /dev/mmcblk0p1 vfat 510M 64M 447M 13% /boot/firmware tmpfs tmpfs 380M 0 380M 0% /run/user/1000 Messages concerning ext4 filesystem in dmesg: [Mon May 6 14:30:07 2024] Kernel command line: coherent_pool=1M 8250.nr_uarts=0 snd_bcm2835.enable_headphones=0 snd_bcm2835.enable_headphones=1 snd_bcm2835.enable_hdmi=1 snd_bcm2835.enable_hdmi=0 smsc95xx.macaddr=D8:3A:DD:96:C0:F6 vc_mem.mem_base=0x3ec00000 vc_mem.mem_size=0x40000000 console=ttyS0,115200 console=tty1 root=PARTUUID=03edf4a5-02 rootfstype=ext4 fsck.repair=yes rootwait cfg80211.ieee80211_regdom=DE [Mon May 6 14:30:09 2024] EXT4-fs (mmcblk0p2): mounted filesystem 93c89e92-8f2e-4522-ad32-68faed883d2f ro with ordered data mode. Quota mode: none. [Mon May 6 14:30:11 2024] EXT4-fs (mmcblk0p2): re-mounted 93c89e92-8f2e-4522-ad32-68faed883d2f r/w. Quota mode: none. Show mounted filesystems: TARGET SOURCE FSTYPE OPTIONS / /dev/mmcblk0p2 ext4 rw,noatime |-/sys sysfs sysfs rw,nosuid,nodev,noexec,relatime | |-/sys/kernel/security securityfs securityfs rw,nosuid,nodev,noexec,relatime | |-/sys/fs/cgroup cgroup2 cgroup2 rw,nosuid,nodev,noexec,relatime,nsdelegate,memory_recursiveprot | |-/sys/fs/pstore pstore pstore rw,nosuid,nodev,noexec,relatime | |-/sys/fs/bpf bpf bpf rw,nosuid,nodev,noexec,relatime,mode=700 | |-/sys/kernel/debug debugfs debugfs rw,nosuid,nodev,noexec,relatime | |-/sys/kernel/tracing tracefs tracefs rw,nosuid,nodev,noexec,relatime | |-/sys/fs/fuse/connections fusectl fusectl rw,nosuid,nodev,noexec,relatime | `-/sys/kernel/config configfs configfs rw,nosuid,nodev,noexec,relatime |-/proc proc proc rw,relatime | `-/proc/sys/fs/binfmt_misc systemd-1 autofs rw,relatime,fd=30,pgrp=1,timeout=0,minproto=5,maxproto=5,direct,pipe_ino=2408 | `-/proc/sys/fs/binfmt_misc binfmt_misc binfmt_misc rw,nosuid,nodev,noexec,relatime |-/dev udev devtmpfs rw,nosuid,relatime,size=1671304k,nr_inodes=417826,mode=755 | |-/dev/pts devpts devpts rw,nosuid,noexec,relatime,gid=5,mode=620,ptmxmode=000 | |-/dev/shm tmpfs tmpfs rw,nosuid,nodev | `-/dev/mqueue mqueue mqueue rw,nosuid,nodev,noexec,relatime |-/run tmpfs tmpfs rw,nosuid,nodev,noexec,relatime,size=388308k,mode=755 | |-/run/lock tmpfs tmpfs rw,nosuid,nodev,noexec,relatime,size=5120k | |-/run/credentials/systemd-sysctl.service ramfs ramfs ro,nosuid,nodev,noexec,relatime,mode=700 | |-/run/credentials/systemd-sysusers.service ramfs ramfs ro,nosuid,nodev,noexec,relatime,mode=700 | |-/run/credentials/systemd-tmpfiles-setup-dev.service ramfs ramfs ro,nosuid,nodev,noexec,relatime,mode=700 | |-/run/rpc_pipefs sunrpc rpc_pipefs rw,relatime | |-/run/credentials/systemd-tmpfiles-setup.service ramfs ramfs ro,nosuid,nodev,noexec,relatime,mode=700 | `-/run/user/1000 tmpfs tmpfs rw,nosuid,nodev,relatime,size=388304k,nr_inodes=97076,mode=700,uid=1000,gid=1000 `-/boot/firmware /dev/mmcblk0p1 vfat rw,relatime,fmask=0022,dmask=0022,codepage=437,iocharset=ascii,shortname=mixed,errors=remount-ro Files in neuralgic directories: /var: 1.9G /var/ 1.3G /var/lib 1.1G /var/lib/influxdb/data 1.1G /var/lib/influxdb 1015M /var/lib/influxdb/data/iobroker/autogen Archived and active journals take up 175.7M in the file system. /opt/iobroker/backups: 522M /opt/iobroker/backups/ /opt/iobroker/iobroker-data: 286M /opt/iobroker/iobroker-data/ 210M /opt/iobroker/iobroker-data/files 60M /opt/iobroker/iobroker-data/backup-objects 57M /opt/iobroker/iobroker-data/files/javascript.admin 38M /opt/iobroker/iobroker-data/files/javascript.admin/static The five largest files in iobroker-data are: 24M /opt/iobroker/iobroker-data/files/web.admin/static/js/main.135279a0.js.map 19M /opt/iobroker/iobroker-data/files/text2command.admin/static/js/main.02fc3820.js.map 14M /opt/iobroker/iobroker-data/objects.jsonl 8.5M /opt/iobroker/iobroker-data/files/web.admin/static/js/main.135279a0.js 8.2M /opt/iobroker/iobroker-data/files/text2command.admin/static/js/main.02fc3820.js USB-Devices by-id: USB-Sticks - Avoid direct links to /dev/tty* in your adapter setups, please always prefer the links 'by-id': No Devices found 'by-id' HINT: Your zigbee.1 COM-Port is NOT matching 'by-id'. Please check your setting: /dev/ttyACM0 *** NodeJS-Installation *** /usr/bin/nodejs v18.20.2 /usr/bin/node v18.20.2 /usr/bin/npm 10.5.0 /usr/bin/npx 10.5.0 /usr/bin/corepack 0.25.2 nodejs: Installed: 18.20.2-1nodesource1 Candidate: 18.20.2-1nodesource1 Version table: *** 18.20.2-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 100 /var/lib/dpkg/status 18.20.1-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.20.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.19.1-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.19.0+dfsg-6~deb12u1 500 500 http://deb.debian.org/debian-security bookworm-security/main arm64 Packages 18.19.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.18.2-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.18.1-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.18.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.17.1-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.17.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.16.1-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.16.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.15.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.14.2-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.14.1-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.14.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.13.0+dfsg1-1 500 500 http://deb.debian.org/debian bookworm/main arm64 Packages 18.13.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.12.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.11.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.10.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.9.1-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.9.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.8.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.7.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.6.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.5.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.4.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.3.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.2.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.1.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.0.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages Temp directories causing npm8 problem: 0 No problems detected Errors in npm tree: *** ioBroker-Installation *** ioBroker Status iobroker is running on this host. Objects type: jsonl States type: jsonl Core adapters versions js-controller: 5.0.19 admin: 6.13.16 javascript: 7.8.0 nodejs modules from github: 1 +-- iobroker.sourceanalytix@0.4.8-alpha.2 (git+ssh://git@github.com/iobroker-community-adapters/ioBroker.sourceanalytix.git#eacbbdeadf4c4bd44636743bc6f52dd21c6f0766) Adapter State + system.adapter.admin.0 : admin : raspberrypi - enabled, port: 8081, bind: 0.0.0.0, run as: admin system.adapter.backitup.0 : backitup : raspberrypi - disabled system.adapter.discovery.0 : discovery : raspberrypi - disabled system.adapter.dwd.0 : dwd : raspberrypi - disabled system.adapter.email.0 : email : raspberrypi - disabled system.adapter.fullybrowser.0 : fullybrowser : raspberrypi - disabled system.adapter.hm-rega.0 : hm-rega : raspberrypi - disabled system.adapter.hm-rpc.0 : hm-rpc : raspberrypi - disabled, port: 0 system.adapter.hm-rpc.1 : hm-rpc : raspberrypi - disabled, port: 0 system.adapter.hm-rpc.2 : hm-rpc : raspberrypi - disabled, port: 0 system.adapter.hm-rpc.3 : hm-rpc : raspberrypi - disabled, port: 0 system.adapter.ical.0 : ical : raspberrypi - disabled system.adapter.icons-mfd-svg.0 : icons-mfd-svg : raspberrypi - disabled system.adapter.influxdb.0 : influxdb : raspberrypi - disabled, port: 8086 system.adapter.javascript.0 : javascript : raspberrypi - disabled + system.adapter.lgtv.0 : lgtv : raspberrypi - enabled system.adapter.meross.0 : meross : raspberrypi - disabled system.adapter.mihome-vacuum.0 : mihome-vacuum : raspberrypi - disabled, port: 54321 system.adapter.mqtt.0 : mqtt : raspberrypi - disabled, port: 1882, bind: 192.168.178.23 system.adapter.mqtt.1 : mqtt : raspberrypi - disabled, port: 1886, bind: 0.0.0.0 system.adapter.onvif.0 : onvif : raspberrypi - disabled system.adapter.openweathermap.0 : openweathermap : raspberrypi - disabled system.adapter.pushover.0 : pushover : raspberrypi - disabled system.adapter.rpi2.0 : rpi2 : raspberrypi - disabled system.adapter.sayit.0 : sayit : raspberrypi - disabled, port: 0 system.adapter.shelly.0 : shelly : raspberrypi - disabled, port: 1883 system.adapter.sonoff.0 : sonoff : raspberrypi - disabled, port: 1884, bind: 0.0.0.0 system.adapter.sourceanalytix.0 : sourceanalytix : raspberrypi - disabled system.adapter.telegram.0 : telegram : raspberrypi - disabled, port: 8443, bind: 0.0.0.0 system.adapter.text2command.0 : text2command : raspberrypi - disabled system.adapter.tr-064.0 : tr-064 : raspberrypi - disabled system.adapter.vis-hqwidgets.0 : vis-hqwidgets : raspberrypi - disabled system.adapter.vis-icontwo.0 : vis-icontwo : raspberrypi - disabled system.adapter.vis-inventwo.0 : vis-inventwo : raspberrypi - disabled system.adapter.vis-jqui-mfd.0 : vis-jqui-mfd : raspberrypi - disabled system.adapter.vis-justgage.0 : vis-justgage : raspberrypi - disabled system.adapter.vis-material-advanced.0 : vis-material-advanced : raspberrypi - disabled system.adapter.vis-timeandweather.0 : vis-timeandweather : raspberrypi - disabled system.adapter.vis-weather.0 : vis-weather : raspberrypi - disabled system.adapter.vis.0 : vis : raspberrypi - disabled system.adapter.web.0 : web : raspberrypi - disabled, port: 8082, bind: 0.0.0.0, run as: admin system.adapter.worx.0 : worx : raspberrypi - disabled system.adapter.zigbee.1 : zigbee : raspberrypi - disabled, port: /dev/ttyACM0 + instance is alive Enabled adapters with bindings + system.adapter.admin.0 : admin : raspberrypi - enabled, port: 8081, bind: 0.0.0.0, run as: admin ioBroker-Repositories Stable (default): http://download.iobroker.net/sources-dist.json Beta (latest) : http://download.iobroker.net/sources-dist-latest.json Active repo(s): Stable (default) Installed ioBroker-Instances Used repository: Stable (default) Adapter "admin" : 6.13.16 , installed 6.13.16 Adapter "backitup" : 2.11.0 , installed 2.11.0 Adapter "discovery" : 4.4.0 , installed 4.4.0 Adapter "dwd" : 2.8.5 , installed 2.8.5 Adapter "email" : 1.2.2 , installed 1.2.2 Adapter "fullybrowser" : 3.0.12 , installed 3.0.12 Adapter "hm-rega" : 4.0.0 , installed 4.0.0 Adapter "hm-rpc" : 1.17.0 , installed 1.17.0 Adapter "ical" : 1.14.3 , installed 1.14.3 Adapter "icons-mfd-svg": 1.2.0 , installed 1.2.0 Adapter "influxdb" : 4.0.2 , installed 4.0.2 Adapter "javascript" : 7.8.0 , installed 7.8.0 Controller "js-controller": 5.0.19 , installed 5.0.19 Adapter "lgtv" : 2.2.0 , installed 2.2.0 Adapter "meross" : 1.17.0 , installed 1.17.0 Adapter "mqtt" : 5.2.0 , installed 5.2.0 Adapter "onvif" : 1.1.3 , installed 1.1.3 Adapter "openweathermap": 1.0.4 , installed 1.0.4 Adapter "pushover" : 3.0.6 , installed 3.0.6 Adapter "rpi2" : 1.3.2 , installed 1.3.2 Adapter "shelly" : 6.9.0 , installed 6.9.0 Adapter "simple-api" : 2.7.2 , installed 2.7.2 Adapter "socketio" : 6.7.0 , installed 6.6.1 [Updatable] Adapter "sonoff" : 3.0.3 , installed 3.0.3 Adapter "telegram" : 3.2.1 , installed 3.2.1 Adapter "text2command" : 3.0.3 , installed 3.0.3 Adapter "tr-064" : 4.2.18 , installed 4.2.18 Adapter "vis" : 1.5.4 , installed 1.5.4 Adapter "vis-hqwidgets": 1.5.1 , installed 1.5.1 Adapter "vis-icontwo" : 1.5.0 , installed 1.5.0 Adapter "vis-inventwo" : 3.3.4 , installed 3.3.4 Adapter "vis-jqui-mfd" : 1.1.1 , installed 1.1.1 Adapter "vis-justgage" : 2.1.7 , installed 2.1.7 Adapter "vis-material-advanced": 1.7.4, installed 1.7.4 Adapter "vis-timeandweather": 1.2.2, installed 1.2.2 Adapter "vis-weather" : 2.5.9 , installed 2.5.9 Adapter "web" : 6.2.5 , installed 6.2.5 Adapter "worx" : 2.3.4 , installed 2.3.4 Adapter "ws" : 2.6.1 , installed 2.5.11 [Updatable] Adapter "zigbee" : 1.10.3 , installed 1.10.3 Objects and States Please stand by - This may take a while Objects: 11125 States: 9533 *** OS-Repositories and Updates *** Hit:1 http://deb.debian.org/debian bookworm InRelease Hit:2 http://deb.debian.org/debian-security bookworm-security InRelease Hit:3 http://deb.debian.org/debian bookworm-updates InRelease Hit:4 https://repos.influxdata.com/debian stable InRelease Hit:5 http://archive.raspberrypi.com/debian bookworm InRelease Hit:6 https://apt.grafana.com stable InRelease Hit:7 https://deb.nodesource.com/node_18.x nodistro InRelease Reading package lists... Pending Updates: 0 *** Listening Ports *** Active Internet connections (only servers) Proto Recv-Q Send-Q Local Address Foreign Address State User Inode PID/Program name tcp 0 0 127.0.0.1:8088 0.0.0.0:* LISTEN 106 2951 752/influxd tcp 0 0 127.0.0.1:8080 0.0.0.0:* LISTEN 108 5759 678/motion tcp 0 0 127.0.0.1:8081 0.0.0.0:* LISTEN 108 5758 678/motion tcp 0 0 0.0.0.0:22 0.0.0.0:* LISTEN 0 1685 682/sshd: /usr/sbin tcp 0 0 127.0.0.1:9000 0.0.0.0:* LISTEN 1001 5871 833/iobroker.js-con tcp 0 0 127.0.0.1:9001 0.0.0.0:* LISTEN 1001 5864 833/iobroker.js-con tcp6 0 0 :::3000 :::* LISTEN 107 1857 832/grafana tcp6 0 0 :::22 :::* LISTEN 0 1687 682/sshd: /usr/sbin tcp6 0 0 :::8086 :::* LISTEN 106 5841 752/influxd tcp6 0 0 :::8082 :::* LISTEN 1001 5931 876/io.admin.0 udp 0 0 0.0.0.0:56049 0.0.0.0:* 104 5664 534/avahi-daemon: r udp 0 0 0.0.0.0:5353 0.0.0.0:* 104 5662 534/avahi-daemon: r udp6 0 0 :::55982 :::* 104 5665 534/avahi-daemon: r udp6 0 0 :::5353 :::* 104 5663 534/avahi-daemon: r *** Log File - Last 25 Lines *** 2024-05-06 14:32:13.828 - error: host.raspberrypi iobroker npm-install: npm ERR! code 127npm ERR! path /opt/iobroker/node_modules/zlibnpm ERR! command failednpm ERR! command sh -c node-waf clean || true; node-waf configure buildnpm ERR! sh: 1: node-waf: not foundnpm ERR! sh: 1: node-waf: not foundnpm ERR! A complete log of this run can be found in: /home/iobroker/.npm/_logs/2024-05-06T12_32_04_539Z-debug-0.log 2024-05-06 14:32:13.829 - error: host.raspberrypi iobroker npm-install: host.raspberrypi Cannot install iobroker.mihome-vacuum@4.0.0: 127 2024-05-06 14:32:14.856 - info: host.raspberrypi iobroker npm-install: exit 25 2024-05-06 14:32:15.856 - warn: host.raspberrypi startInstance cannot find adapter "sayit@1.12.3". Try to install it... 3 attempt 2024-05-06 14:32:15.857 - info: host.raspberrypi iobroker install sayit@1.12.3 using installedVersion 2024-05-06 14:32:19.039 - info: host.raspberrypi iobroker npm-install: NPM version: 10.5.0 2024-05-06 14:32:19.042 - info: host.raspberrypi iobroker npm-install: Installing iobroker.sayit@1.12.3... (System call) 2024-05-06 14:32:35.524 - error: host.raspberrypi iobroker npm-install: npm ERR! code 1npm ERR! path /opt/iobroker/node_modules/iobroker.sayitnpm ERR! command failednpm ERR! command sh -c node main.js --installnpm ERR! node:internal/modules/cjs/loader:1143npm ERR! throw err;npm ERR! ^npm ERR! npm ERR! Error: Cannot find module '/opt/iobroker/node_modules/iobroker.js-controller/lib/tools'npm ERR! Require stack:npm ERR! - /opt/iobroker/node_modules/iobroker.sayit/main.jsnpm ERR! at Module._resolveFilename (node:internal/modules/cjs/loader:1140:15)npm ERR! at Module._load (node:internal/modules/cjs/loader:981:27)npm ERR! at Module.require (node:internal/modules/cjs/loader:1231:19)npm ERR! at require (node:internal/modules/helpers:177:18)npm ERR! at Object.<anonymous> (/opt/iobroker/node_modules/iobroker.sayit/main.js:17:61)npm ERR! at Module._compile (node:internal/modules/cjs/loader:1364:14)npm ERR! at Module._extensions..js (node:internal/modules/cjs/loader:1422:10)npm ERR! at Module.load (node:internal/modules/cjs/loader:1203:32)npm ERR! at Module._load (node:internal/modules/cjs/loader:1019:12)npm ERR! at Function.executeUserEntryPoint [as runMain] (node:internal/modules/run_main:128:12) {npm ERR! code: 'MODULE_NOT_FOUND',npm ERR! requireStack: [ '/opt/iobroker/node_modules/iobroker.sayit/main.js' ]npm ERR! }npm ERR! npm ERR! Node.js v18.20.2npm ERR! A complete log of this run can be found in: /home/iobroker/.npm/_logs/2024-05-06T12_32_19_779Z-debug-0.log 2024-05-06 14:32:35.525 - error: host.raspberrypi iobroker npm-install: host.raspberrypi Cannot install iobroker.sayit@1.12.3: 1 2024-05-06 14:32:36.555 - info: host.raspberrypi iobroker npm-install: exit 25 2024-05-06 14:32:37.556 - warn: host.raspberrypi startInstance cannot find adapter "mihome-vacuum@4.0.0". Try to install it... 4 attempt 2024-05-06 14:32:37.557 - info: host.raspberrypi iobroker install mihome-vacuum@4.0.0 using installedVersion 2024-05-06 14:32:40.645 - info: host.raspberrypi iobroker npm-install: NPM version: 10.5.0 2024-05-06 14:32:40.647 - info: host.raspberrypi iobroker npm-install: Installing iobroker.mihome-vacuum@4.0.0... (System call) 2024-05-06 14:32:50.493 - error: host.raspberrypi iobroker npm-install: npm ERR! code 127npm ERR! path /opt/iobroker/node_modules/zlibnpm ERR! command failednpm ERR! command sh -c node-waf clean || true; node-waf configure buildnpm ERR! sh: 1: node-waf: not foundnpm ERR! sh: 1: node-waf: not foundnpm ERR! A complete log of this run can be found in: /home/iobroker/.npm/_logs/2024-05-06T12_32_41_399Z-debug-0.loghost.raspberrypi Cannot install iobroker.mihome-vacuum@4.0.0: 127 2024-05-06 14:32:51.518 - info: host.raspberrypi iobroker npm-install: exit 25 2024-05-06 14:32:52.519 - warn: host.raspberrypi startInstance cannot find adapter "sayit@1.12.3". Try to install it... 4 attempt 2024-05-06 14:32:52.519 - info: host.raspberrypi iobroker install sayit@1.12.3 using installedVersion 2024-05-06 14:32:55.668 - info: host.raspberrypi iobroker npm-install: NPM version: 10.5.0 2024-05-06 14:32:55.671 - info: host.raspberrypi iobroker npm-install: Installing iobroker.sayit@1.12.3... (System call) 2024-05-06 14:33:11.937 - error: host.raspberrypi iobroker npm-install: npm ERR! code 1npm ERR! path /opt/iobroker/node_modules/iobroker.sayitnpm ERR! command failednpm ERR! command sh -c node main.js --installnpm ERR! node:internal/modules/cjs/loader:1143npm ERR! throw err;npm ERR! ^npm ERR! npm ERR! Error: Cannot find module '/opt/iobroker/node_modules/iobroker.js-controller/lib/tools'npm ERR! Require stack:npm ERR! - /opt/iobroker/node_modules/iobroker.sayit/main.jsnpm ERR! at Module._resolveFilename (node:internal/modules/cjs/loader:1140:15)npm ERR! at Module._load (node:internal/modules/cjs/loader:981:27)npm ERR! at Module.require (node:internal/modules/cjs/loader:1231:19)npm ERR! at require (node:internal/modules/helpers:177:18)npm ERR! at Object.<anonymous> (/opt/iobroker/node_modules/iobroker.sayit/main.js:17:61)npm ERR! at Module._compile (node:internal/modules/cjs/loader:1364:14)npm ERR! at Module._extensions..js (node:internal/modules/cjs/loader:1422:10)npm ERR! at Module.load (node:internal/modules/cjs/loader:1203:32)npm ERR! at Module._load (node:internal/modules/cjs/loader:1019:12)npm ERR! at Function.executeUserEntryPoint [as runMain] (node:internal/modules/run_main:128:12) {npm ERR! code: 'MODULE_NOT_FOUND',npm ERR! requireStack: [ '/opt/iobroker/node_modules/iobroker.sayit/main.js' ]npm ERR! }npm ERR! npm ERR! Node.js v18.20.2npm ERR! A complete log of this run can be found in: /home/iobroker/.npm/_logs/2024-05-06T12_32_56_377Z-debug-0.log 2024-05-06 14:33:11.938 - error: host.raspberrypi iobroker npm-install: host.raspberrypi Cannot install iobroker.sayit@1.12.3: 1 2024-05-06 14:33:12.966 - info: host.raspberrypi iobroker npm-install: exit 25 2024-05-06 14:33:13.966 - error: host.raspberrypi Cannot download and install adapter "mihome-vacuum@4.0.0". To retry it disable/enable the adapter or restart host. Also check the error messages in the log! 2024-05-06 14:33:14.467 - error: host.raspberrypi Cannot download and install adapter "sayit@1.12.3". To retry it disable/enable the adapter or restart host. Also check the error messages in the log! -
iob start web -
@bill-s-preston sagte in Iobroker startet nicht mehr nach Restore:
motioneye.service loaded failed failed
So viel ich weiß, müssen ggf Ports angepasst werden um Motioneye und iobroker zusammen auf einen Rechner laufen zu lassen
Unabhängig davon, reichen 4GB RAM da eh nicht aus -
@thomas-braun said in Iobroker startet nicht mehr nach Restore:
iob start webGemacht. Startet noch immer nicht.
-
@crunchip said in Iobroker startet nicht mehr nach Restore:
@bill-s-preston sagte in Iobroker startet nicht mehr nach Restore:
motioneye.service loaded failed failed
So viel ich weiß, müssen ggf Ports angepasst werden um Motioneye und iobroker zusammen auf einen Rechner laufen zu lassen
Unabhängig davon, reichen 4GB RAM da eh nicht ausMoitonEye und Iobroker laufen seit zwei Jahren ohne Probleme zusammen auf einem 4GB Pi.
Aber ich habe jetzt bei dem Neuen System versucht MotionEye zu öffnen. Leider ebenfalls Still.
MotionEye lläuft aber auf Port 8765. Und wie gesagt, bis gestern vor dem Restore auch ohne Probleme. -
@bill-s-preston sagte in Iobroker startet nicht mehr nach Restore:
Startet noch immer nicht.
was genau?
wie genau?was passiert?
