Iobroker startet nicht mehr nach Restore
-
@bill-s-preston sagte in Iobroker startet nicht mehr nach Restore:
So sieht es jetzt aus.
letzte Aktion um 09:54??
vor fast 4 Stunden? -
@homoran said in Iobroker startet nicht mehr nach Restore:
@bill-s-preston sagte in Iobroker startet nicht mehr nach Restore:
So sieht es jetzt aus.
letzte Aktion um 09:54??
vor fast 4 Stunden?Ja das passt
-
@thomas-braun said in Iobroker startet nicht mehr nach Restore:
iob update iob upgrade all -yLäuft. Dauert etwas...
-
@bill-s-preston sagte in Iobroker startet nicht mehr nach Restore:
Dauert etwas...
Klar, bei 29 Adaptern...
-
So, update ist fertig. Auch nach nem reboot des Systems ist der Broker still.
-
-
@thomas-braun said in Iobroker startet nicht mehr nach Restore:
iob diagsagt?
Skript v.2024-04-21 *** BASE SYSTEM *** Static hostname: raspberrypi Icon name: computer Operating System: Debian GNU/Linux 12 (bookworm) Kernel: Linux 6.6.28+rpt-rpi-v8 Architecture: arm64 Model : Raspberry Pi 4 Model B Rev 1.5 Docker : false Virtualization : none Kernel : aarch64 Userland : 64 bit Systemuptime and Load: 14:34:15 up 4 min, 2 users, load average: 0.83, 0.74, 0.33 CPU threads: 4 *** RASPBERRY THROTTLING *** Current issues: No throttling issues detected. Previously detected issues: No throttling issues detected. *** Time and Time Zones *** Local time: Mon 2024-05-06 14:34:15 CEST Universal time: Mon 2024-05-06 12:34:15 UTC RTC time: n/a Time zone: Europe/Berlin (CEST, +0200) System clock synchronized: yes NTP service: active RTC in local TZ: no *** Users and Groups *** User that called 'iob diag': herke HOME=/home/herke GROUPS=herke adm dialout cdrom sudo audio video plugdev games users input render netdev gpio i2c spi iobroker User that is running 'js-controller': iobroker HOME=/home/iobroker GROUPS=iobroker tty dialout audio video plugdev bluetooth gpio i2c *** Display-Server-Setup *** pgrep: pattern that searches for process name longer than 15 characters will result in zero matches Try `pgrep -f' option to match against the complete command line. Display-Server: false Desktop: Terminal: tty Boot Target: multi-user.target *** MEMORY *** total used free shared buff/cache available Mem: 4.0G 641M 2.7G 1.2M 669M 3.3G Swap: 104M 0B 104M Total: 4.1G 641M 2.8G Active iob-Instances: 3 3792 M total memory 612 M used memory 871 M active memory 200 M inactive memory 2613 M free memory 64 M buffer memory 573 M swap cache 99 M total swap 0 M used swap 99 M free swap *** top - Table Of Processes *** top - 14:34:16 up 4 min, 2 users, load average: 0.83, 0.74, 0.33 Tasks: 186 total, 2 running, 184 sleeping, 0 stopped, 0 zombie %Cpu(s): 0.0 us, 0.0 sy, 0.0 ni,100.0 id, 0.0 wa, 0.0 hi, 0.0 si, 0.0 st MiB Mem : 3792.1 total, 2612.8 free, 613.1 used, 638.6 buff/cache MiB Swap: 100.0 total, 100.0 free, 0.0 used. 3178.9 avail Mem *** FAILED SERVICES *** UNIT LOAD ACTIVE SUB DESCRIPTION * motioneye.service loaded failed failed motionEye Server LOAD = Reflects whether the unit definition was properly loaded. ACTIVE = The high-level unit activation state, i.e. generalization of SUB. SUB = The low-level unit activation state, values depend on unit type. 1 loaded units listed. *** FILESYSTEM *** Filesystem Type Size Used Avail Use% Mounted on udev devtmpfs 1.6G 0 1.6G 0% /dev tmpfs tmpfs 380M 1.2M 379M 1% /run /dev/mmcblk0p2 ext4 117G 8.1G 103G 8% / tmpfs tmpfs 1.9G 0 1.9G 0% /dev/shm tmpfs tmpfs 5.0M 16K 5.0M 1% /run/lock /dev/mmcblk0p1 vfat 510M 64M 447M 13% /boot/firmware tmpfs tmpfs 380M 0 380M 0% /run/user/1000 Messages concerning ext4 filesystem in dmesg: [Mon May 6 14:30:07 2024] Kernel command line: coherent_pool=1M 8250.nr_uarts=0 snd_bcm2835.enable_headphones=0 snd_bcm2835.enable_headphones=1 snd_bcm2835.enable_hdmi=1 snd_bcm2835.enable_hdmi=0 smsc95xx.macaddr=D8:3A:DD:96:C0:F6 vc_mem.mem_base=0x3ec00000 vc_mem.mem_size=0x40000000 console=ttyS0,115200 console=tty1 root=PARTUUID=03edf4a5-02 rootfstype=ext4 fsck.repair=yes rootwait cfg80211.ieee80211_regdom=DE [Mon May 6 14:30:09 2024] EXT4-fs (mmcblk0p2): mounted filesystem 93c89e92-8f2e-4522-ad32-68faed883d2f ro with ordered data mode. Quota mode: none. [Mon May 6 14:30:11 2024] EXT4-fs (mmcblk0p2): re-mounted 93c89e92-8f2e-4522-ad32-68faed883d2f r/w. Quota mode: none. Show mounted filesystems: TARGET SOURCE FSTYPE OPTIONS / /dev/mmcblk0p2 ext4 rw,noatime |-/sys sysfs sysfs rw,nosuid,nodev,noexec,relatime | |-/sys/kernel/security securityfs securityfs rw,nosuid,nodev,noexec,relatime | |-/sys/fs/cgroup cgroup2 cgroup2 rw,nosuid,nodev,noexec,relatime,nsdelegate,memory_recursiveprot | |-/sys/fs/pstore pstore pstore rw,nosuid,nodev,noexec,relatime | |-/sys/fs/bpf bpf bpf rw,nosuid,nodev,noexec,relatime,mode=700 | |-/sys/kernel/debug debugfs debugfs rw,nosuid,nodev,noexec,relatime | |-/sys/kernel/tracing tracefs tracefs rw,nosuid,nodev,noexec,relatime | |-/sys/fs/fuse/connections fusectl fusectl rw,nosuid,nodev,noexec,relatime | `-/sys/kernel/config configfs configfs rw,nosuid,nodev,noexec,relatime |-/proc proc proc rw,relatime | `-/proc/sys/fs/binfmt_misc systemd-1 autofs rw,relatime,fd=30,pgrp=1,timeout=0,minproto=5,maxproto=5,direct,pipe_ino=2408 | `-/proc/sys/fs/binfmt_misc binfmt_misc binfmt_misc rw,nosuid,nodev,noexec,relatime |-/dev udev devtmpfs rw,nosuid,relatime,size=1671304k,nr_inodes=417826,mode=755 | |-/dev/pts devpts devpts rw,nosuid,noexec,relatime,gid=5,mode=620,ptmxmode=000 | |-/dev/shm tmpfs tmpfs rw,nosuid,nodev | `-/dev/mqueue mqueue mqueue rw,nosuid,nodev,noexec,relatime |-/run tmpfs tmpfs rw,nosuid,nodev,noexec,relatime,size=388308k,mode=755 | |-/run/lock tmpfs tmpfs rw,nosuid,nodev,noexec,relatime,size=5120k | |-/run/credentials/systemd-sysctl.service ramfs ramfs ro,nosuid,nodev,noexec,relatime,mode=700 | |-/run/credentials/systemd-sysusers.service ramfs ramfs ro,nosuid,nodev,noexec,relatime,mode=700 | |-/run/credentials/systemd-tmpfiles-setup-dev.service ramfs ramfs ro,nosuid,nodev,noexec,relatime,mode=700 | |-/run/rpc_pipefs sunrpc rpc_pipefs rw,relatime | |-/run/credentials/systemd-tmpfiles-setup.service ramfs ramfs ro,nosuid,nodev,noexec,relatime,mode=700 | `-/run/user/1000 tmpfs tmpfs rw,nosuid,nodev,relatime,size=388304k,nr_inodes=97076,mode=700,uid=1000,gid=1000 `-/boot/firmware /dev/mmcblk0p1 vfat rw,relatime,fmask=0022,dmask=0022,codepage=437,iocharset=ascii,shortname=mixed,errors=remount-ro Files in neuralgic directories: /var: 1.9G /var/ 1.3G /var/lib 1.1G /var/lib/influxdb/data 1.1G /var/lib/influxdb 1015M /var/lib/influxdb/data/iobroker/autogen Archived and active journals take up 175.7M in the file system. /opt/iobroker/backups: 522M /opt/iobroker/backups/ /opt/iobroker/iobroker-data: 286M /opt/iobroker/iobroker-data/ 210M /opt/iobroker/iobroker-data/files 60M /opt/iobroker/iobroker-data/backup-objects 57M /opt/iobroker/iobroker-data/files/javascript.admin 38M /opt/iobroker/iobroker-data/files/javascript.admin/static The five largest files in iobroker-data are: 24M /opt/iobroker/iobroker-data/files/web.admin/static/js/main.135279a0.js.map 19M /opt/iobroker/iobroker-data/files/text2command.admin/static/js/main.02fc3820.js.map 14M /opt/iobroker/iobroker-data/objects.jsonl 8.5M /opt/iobroker/iobroker-data/files/web.admin/static/js/main.135279a0.js 8.2M /opt/iobroker/iobroker-data/files/text2command.admin/static/js/main.02fc3820.js USB-Devices by-id: USB-Sticks - Avoid direct links to /dev/tty* in your adapter setups, please always prefer the links 'by-id': No Devices found 'by-id' HINT: Your zigbee.1 COM-Port is NOT matching 'by-id'. Please check your setting: /dev/ttyACM0 *** NodeJS-Installation *** /usr/bin/nodejs v18.20.2 /usr/bin/node v18.20.2 /usr/bin/npm 10.5.0 /usr/bin/npx 10.5.0 /usr/bin/corepack 0.25.2 nodejs: Installed: 18.20.2-1nodesource1 Candidate: 18.20.2-1nodesource1 Version table: *** 18.20.2-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 100 /var/lib/dpkg/status 18.20.1-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.20.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.19.1-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.19.0+dfsg-6~deb12u1 500 500 http://deb.debian.org/debian-security bookworm-security/main arm64 Packages 18.19.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.18.2-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.18.1-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.18.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.17.1-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.17.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.16.1-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.16.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.15.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.14.2-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.14.1-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.14.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.13.0+dfsg1-1 500 500 http://deb.debian.org/debian bookworm/main arm64 Packages 18.13.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.12.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.11.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.10.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.9.1-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.9.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.8.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.7.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.6.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.5.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.4.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.3.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.2.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.1.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.0.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages Temp directories causing npm8 problem: 0 No problems detected Errors in npm tree: *** ioBroker-Installation *** ioBroker Status iobroker is running on this host. Objects type: jsonl States type: jsonl Core adapters versions js-controller: 5.0.19 admin: 6.13.16 javascript: 7.8.0 nodejs modules from github: 1 +-- iobroker.sourceanalytix@0.4.8-alpha.2 (git+ssh://git@github.com/iobroker-community-adapters/ioBroker.sourceanalytix.git#eacbbdeadf4c4bd44636743bc6f52dd21c6f0766) Adapter State + system.adapter.admin.0 : admin : raspberrypi - enabled, port: 8081, bind: 0.0.0.0, run as: admin system.adapter.backitup.0 : backitup : raspberrypi - disabled system.adapter.discovery.0 : discovery : raspberrypi - disabled system.adapter.dwd.0 : dwd : raspberrypi - disabled system.adapter.email.0 : email : raspberrypi - disabled system.adapter.fullybrowser.0 : fullybrowser : raspberrypi - disabled system.adapter.hm-rega.0 : hm-rega : raspberrypi - disabled system.adapter.hm-rpc.0 : hm-rpc : raspberrypi - disabled, port: 0 system.adapter.hm-rpc.1 : hm-rpc : raspberrypi - disabled, port: 0 system.adapter.hm-rpc.2 : hm-rpc : raspberrypi - disabled, port: 0 system.adapter.hm-rpc.3 : hm-rpc : raspberrypi - disabled, port: 0 system.adapter.ical.0 : ical : raspberrypi - disabled system.adapter.icons-mfd-svg.0 : icons-mfd-svg : raspberrypi - disabled system.adapter.influxdb.0 : influxdb : raspberrypi - disabled, port: 8086 system.adapter.javascript.0 : javascript : raspberrypi - disabled + system.adapter.lgtv.0 : lgtv : raspberrypi - enabled system.adapter.meross.0 : meross : raspberrypi - disabled system.adapter.mihome-vacuum.0 : mihome-vacuum : raspberrypi - disabled, port: 54321 system.adapter.mqtt.0 : mqtt : raspberrypi - disabled, port: 1882, bind: 192.168.178.23 system.adapter.mqtt.1 : mqtt : raspberrypi - disabled, port: 1886, bind: 0.0.0.0 system.adapter.onvif.0 : onvif : raspberrypi - disabled system.adapter.openweathermap.0 : openweathermap : raspberrypi - disabled system.adapter.pushover.0 : pushover : raspberrypi - disabled system.adapter.rpi2.0 : rpi2 : raspberrypi - disabled system.adapter.sayit.0 : sayit : raspberrypi - disabled, port: 0 system.adapter.shelly.0 : shelly : raspberrypi - disabled, port: 1883 system.adapter.sonoff.0 : sonoff : raspberrypi - disabled, port: 1884, bind: 0.0.0.0 system.adapter.sourceanalytix.0 : sourceanalytix : raspberrypi - disabled system.adapter.telegram.0 : telegram : raspberrypi - disabled, port: 8443, bind: 0.0.0.0 system.adapter.text2command.0 : text2command : raspberrypi - disabled system.adapter.tr-064.0 : tr-064 : raspberrypi - disabled system.adapter.vis-hqwidgets.0 : vis-hqwidgets : raspberrypi - disabled system.adapter.vis-icontwo.0 : vis-icontwo : raspberrypi - disabled system.adapter.vis-inventwo.0 : vis-inventwo : raspberrypi - disabled system.adapter.vis-jqui-mfd.0 : vis-jqui-mfd : raspberrypi - disabled system.adapter.vis-justgage.0 : vis-justgage : raspberrypi - disabled system.adapter.vis-material-advanced.0 : vis-material-advanced : raspberrypi - disabled system.adapter.vis-timeandweather.0 : vis-timeandweather : raspberrypi - disabled system.adapter.vis-weather.0 : vis-weather : raspberrypi - disabled system.adapter.vis.0 : vis : raspberrypi - disabled system.adapter.web.0 : web : raspberrypi - disabled, port: 8082, bind: 0.0.0.0, run as: admin system.adapter.worx.0 : worx : raspberrypi - disabled system.adapter.zigbee.1 : zigbee : raspberrypi - disabled, port: /dev/ttyACM0 + instance is alive Enabled adapters with bindings + system.adapter.admin.0 : admin : raspberrypi - enabled, port: 8081, bind: 0.0.0.0, run as: admin ioBroker-Repositories Stable (default): http://download.iobroker.net/sources-dist.json Beta (latest) : http://download.iobroker.net/sources-dist-latest.json Active repo(s): Stable (default) Installed ioBroker-Instances Used repository: Stable (default) Adapter "admin" : 6.13.16 , installed 6.13.16 Adapter "backitup" : 2.11.0 , installed 2.11.0 Adapter "discovery" : 4.4.0 , installed 4.4.0 Adapter "dwd" : 2.8.5 , installed 2.8.5 Adapter "email" : 1.2.2 , installed 1.2.2 Adapter "fullybrowser" : 3.0.12 , installed 3.0.12 Adapter "hm-rega" : 4.0.0 , installed 4.0.0 Adapter "hm-rpc" : 1.17.0 , installed 1.17.0 Adapter "ical" : 1.14.3 , installed 1.14.3 Adapter "icons-mfd-svg": 1.2.0 , installed 1.2.0 Adapter "influxdb" : 4.0.2 , installed 4.0.2 Adapter "javascript" : 7.8.0 , installed 7.8.0 Controller "js-controller": 5.0.19 , installed 5.0.19 Adapter "lgtv" : 2.2.0 , installed 2.2.0 Adapter "meross" : 1.17.0 , installed 1.17.0 Adapter "mqtt" : 5.2.0 , installed 5.2.0 Adapter "onvif" : 1.1.3 , installed 1.1.3 Adapter "openweathermap": 1.0.4 , installed 1.0.4 Adapter "pushover" : 3.0.6 , installed 3.0.6 Adapter "rpi2" : 1.3.2 , installed 1.3.2 Adapter "shelly" : 6.9.0 , installed 6.9.0 Adapter "simple-api" : 2.7.2 , installed 2.7.2 Adapter "socketio" : 6.7.0 , installed 6.6.1 [Updatable] Adapter "sonoff" : 3.0.3 , installed 3.0.3 Adapter "telegram" : 3.2.1 , installed 3.2.1 Adapter "text2command" : 3.0.3 , installed 3.0.3 Adapter "tr-064" : 4.2.18 , installed 4.2.18 Adapter "vis" : 1.5.4 , installed 1.5.4 Adapter "vis-hqwidgets": 1.5.1 , installed 1.5.1 Adapter "vis-icontwo" : 1.5.0 , installed 1.5.0 Adapter "vis-inventwo" : 3.3.4 , installed 3.3.4 Adapter "vis-jqui-mfd" : 1.1.1 , installed 1.1.1 Adapter "vis-justgage" : 2.1.7 , installed 2.1.7 Adapter "vis-material-advanced": 1.7.4, installed 1.7.4 Adapter "vis-timeandweather": 1.2.2, installed 1.2.2 Adapter "vis-weather" : 2.5.9 , installed 2.5.9 Adapter "web" : 6.2.5 , installed 6.2.5 Adapter "worx" : 2.3.4 , installed 2.3.4 Adapter "ws" : 2.6.1 , installed 2.5.11 [Updatable] Adapter "zigbee" : 1.10.3 , installed 1.10.3 Objects and States Please stand by - This may take a while Objects: 11125 States: 9533 *** OS-Repositories and Updates *** Hit:1 http://deb.debian.org/debian bookworm InRelease Hit:2 http://deb.debian.org/debian-security bookworm-security InRelease Hit:3 http://deb.debian.org/debian bookworm-updates InRelease Hit:4 https://repos.influxdata.com/debian stable InRelease Hit:5 http://archive.raspberrypi.com/debian bookworm InRelease Hit:6 https://apt.grafana.com stable InRelease Hit:7 https://deb.nodesource.com/node_18.x nodistro InRelease Reading package lists... Pending Updates: 0 *** Listening Ports *** Active Internet connections (only servers) Proto Recv-Q Send-Q Local Address Foreign Address State User Inode PID/Program name tcp 0 0 127.0.0.1:8088 0.0.0.0:* LISTEN 106 2951 752/influxd tcp 0 0 127.0.0.1:8080 0.0.0.0:* LISTEN 108 5759 678/motion tcp 0 0 127.0.0.1:8081 0.0.0.0:* LISTEN 108 5758 678/motion tcp 0 0 0.0.0.0:22 0.0.0.0:* LISTEN 0 1685 682/sshd: /usr/sbin tcp 0 0 127.0.0.1:9000 0.0.0.0:* LISTEN 1001 5871 833/iobroker.js-con tcp 0 0 127.0.0.1:9001 0.0.0.0:* LISTEN 1001 5864 833/iobroker.js-con tcp6 0 0 :::3000 :::* LISTEN 107 1857 832/grafana tcp6 0 0 :::22 :::* LISTEN 0 1687 682/sshd: /usr/sbin tcp6 0 0 :::8086 :::* LISTEN 106 5841 752/influxd tcp6 0 0 :::8082 :::* LISTEN 1001 5931 876/io.admin.0 udp 0 0 0.0.0.0:56049 0.0.0.0:* 104 5664 534/avahi-daemon: r udp 0 0 0.0.0.0:5353 0.0.0.0:* 104 5662 534/avahi-daemon: r udp6 0 0 :::55982 :::* 104 5665 534/avahi-daemon: r udp6 0 0 :::5353 :::* 104 5663 534/avahi-daemon: r *** Log File - Last 25 Lines *** 2024-05-06 14:32:13.828 - error: host.raspberrypi iobroker npm-install: npm ERR! code 127npm ERR! path /opt/iobroker/node_modules/zlibnpm ERR! command failednpm ERR! command sh -c node-waf clean || true; node-waf configure buildnpm ERR! sh: 1: node-waf: not foundnpm ERR! sh: 1: node-waf: not foundnpm ERR! A complete log of this run can be found in: /home/iobroker/.npm/_logs/2024-05-06T12_32_04_539Z-debug-0.log 2024-05-06 14:32:13.829 - error: host.raspberrypi iobroker npm-install: host.raspberrypi Cannot install iobroker.mihome-vacuum@4.0.0: 127 2024-05-06 14:32:14.856 - info: host.raspberrypi iobroker npm-install: exit 25 2024-05-06 14:32:15.856 - warn: host.raspberrypi startInstance cannot find adapter "sayit@1.12.3". Try to install it... 3 attempt 2024-05-06 14:32:15.857 - info: host.raspberrypi iobroker install sayit@1.12.3 using installedVersion 2024-05-06 14:32:19.039 - info: host.raspberrypi iobroker npm-install: NPM version: 10.5.0 2024-05-06 14:32:19.042 - info: host.raspberrypi iobroker npm-install: Installing iobroker.sayit@1.12.3... (System call) 2024-05-06 14:32:35.524 - error: host.raspberrypi iobroker npm-install: npm ERR! code 1npm ERR! path /opt/iobroker/node_modules/iobroker.sayitnpm ERR! command failednpm ERR! command sh -c node main.js --installnpm ERR! node:internal/modules/cjs/loader:1143npm ERR! throw err;npm ERR! ^npm ERR! npm ERR! Error: Cannot find module '/opt/iobroker/node_modules/iobroker.js-controller/lib/tools'npm ERR! Require stack:npm ERR! - /opt/iobroker/node_modules/iobroker.sayit/main.jsnpm ERR! at Module._resolveFilename (node:internal/modules/cjs/loader:1140:15)npm ERR! at Module._load (node:internal/modules/cjs/loader:981:27)npm ERR! at Module.require (node:internal/modules/cjs/loader:1231:19)npm ERR! at require (node:internal/modules/helpers:177:18)npm ERR! at Object.<anonymous> (/opt/iobroker/node_modules/iobroker.sayit/main.js:17:61)npm ERR! at Module._compile (node:internal/modules/cjs/loader:1364:14)npm ERR! at Module._extensions..js (node:internal/modules/cjs/loader:1422:10)npm ERR! at Module.load (node:internal/modules/cjs/loader:1203:32)npm ERR! at Module._load (node:internal/modules/cjs/loader:1019:12)npm ERR! at Function.executeUserEntryPoint [as runMain] (node:internal/modules/run_main:128:12) {npm ERR! code: 'MODULE_NOT_FOUND',npm ERR! requireStack: [ '/opt/iobroker/node_modules/iobroker.sayit/main.js' ]npm ERR! }npm ERR! npm ERR! Node.js v18.20.2npm ERR! A complete log of this run can be found in: /home/iobroker/.npm/_logs/2024-05-06T12_32_19_779Z-debug-0.log 2024-05-06 14:32:35.525 - error: host.raspberrypi iobroker npm-install: host.raspberrypi Cannot install iobroker.sayit@1.12.3: 1 2024-05-06 14:32:36.555 - info: host.raspberrypi iobroker npm-install: exit 25 2024-05-06 14:32:37.556 - warn: host.raspberrypi startInstance cannot find adapter "mihome-vacuum@4.0.0". Try to install it... 4 attempt 2024-05-06 14:32:37.557 - info: host.raspberrypi iobroker install mihome-vacuum@4.0.0 using installedVersion 2024-05-06 14:32:40.645 - info: host.raspberrypi iobroker npm-install: NPM version: 10.5.0 2024-05-06 14:32:40.647 - info: host.raspberrypi iobroker npm-install: Installing iobroker.mihome-vacuum@4.0.0... (System call) 2024-05-06 14:32:50.493 - error: host.raspberrypi iobroker npm-install: npm ERR! code 127npm ERR! path /opt/iobroker/node_modules/zlibnpm ERR! command failednpm ERR! command sh -c node-waf clean || true; node-waf configure buildnpm ERR! sh: 1: node-waf: not foundnpm ERR! sh: 1: node-waf: not foundnpm ERR! A complete log of this run can be found in: /home/iobroker/.npm/_logs/2024-05-06T12_32_41_399Z-debug-0.loghost.raspberrypi Cannot install iobroker.mihome-vacuum@4.0.0: 127 2024-05-06 14:32:51.518 - info: host.raspberrypi iobroker npm-install: exit 25 2024-05-06 14:32:52.519 - warn: host.raspberrypi startInstance cannot find adapter "sayit@1.12.3". Try to install it... 4 attempt 2024-05-06 14:32:52.519 - info: host.raspberrypi iobroker install sayit@1.12.3 using installedVersion 2024-05-06 14:32:55.668 - info: host.raspberrypi iobroker npm-install: NPM version: 10.5.0 2024-05-06 14:32:55.671 - info: host.raspberrypi iobroker npm-install: Installing iobroker.sayit@1.12.3... (System call) 2024-05-06 14:33:11.937 - error: host.raspberrypi iobroker npm-install: npm ERR! code 1npm ERR! path /opt/iobroker/node_modules/iobroker.sayitnpm ERR! command failednpm ERR! command sh -c node main.js --installnpm ERR! node:internal/modules/cjs/loader:1143npm ERR! throw err;npm ERR! ^npm ERR! npm ERR! Error: Cannot find module '/opt/iobroker/node_modules/iobroker.js-controller/lib/tools'npm ERR! Require stack:npm ERR! - /opt/iobroker/node_modules/iobroker.sayit/main.jsnpm ERR! at Module._resolveFilename (node:internal/modules/cjs/loader:1140:15)npm ERR! at Module._load (node:internal/modules/cjs/loader:981:27)npm ERR! at Module.require (node:internal/modules/cjs/loader:1231:19)npm ERR! at require (node:internal/modules/helpers:177:18)npm ERR! at Object.<anonymous> (/opt/iobroker/node_modules/iobroker.sayit/main.js:17:61)npm ERR! at Module._compile (node:internal/modules/cjs/loader:1364:14)npm ERR! at Module._extensions..js (node:internal/modules/cjs/loader:1422:10)npm ERR! at Module.load (node:internal/modules/cjs/loader:1203:32)npm ERR! at Module._load (node:internal/modules/cjs/loader:1019:12)npm ERR! at Function.executeUserEntryPoint [as runMain] (node:internal/modules/run_main:128:12) {npm ERR! code: 'MODULE_NOT_FOUND',npm ERR! requireStack: [ '/opt/iobroker/node_modules/iobroker.sayit/main.js' ]npm ERR! }npm ERR! npm ERR! Node.js v18.20.2npm ERR! A complete log of this run can be found in: /home/iobroker/.npm/_logs/2024-05-06T12_32_56_377Z-debug-0.log 2024-05-06 14:33:11.938 - error: host.raspberrypi iobroker npm-install: host.raspberrypi Cannot install iobroker.sayit@1.12.3: 1 2024-05-06 14:33:12.966 - info: host.raspberrypi iobroker npm-install: exit 25 2024-05-06 14:33:13.966 - error: host.raspberrypi Cannot download and install adapter "mihome-vacuum@4.0.0". To retry it disable/enable the adapter or restart host. Also check the error messages in the log! 2024-05-06 14:33:14.467 - error: host.raspberrypi Cannot download and install adapter "sayit@1.12.3". To retry it disable/enable the adapter or restart host. Also check the error messages in the log! -
iob start web -
@bill-s-preston sagte in Iobroker startet nicht mehr nach Restore:
motioneye.service loaded failed failed
So viel ich weiß, müssen ggf Ports angepasst werden um Motioneye und iobroker zusammen auf einen Rechner laufen zu lassen
Unabhängig davon, reichen 4GB RAM da eh nicht aus -
@thomas-braun said in Iobroker startet nicht mehr nach Restore:
iob start webGemacht. Startet noch immer nicht.
-
@crunchip said in Iobroker startet nicht mehr nach Restore:
@bill-s-preston sagte in Iobroker startet nicht mehr nach Restore:
motioneye.service loaded failed failed
So viel ich weiß, müssen ggf Ports angepasst werden um Motioneye und iobroker zusammen auf einen Rechner laufen zu lassen
Unabhängig davon, reichen 4GB RAM da eh nicht ausMoitonEye und Iobroker laufen seit zwei Jahren ohne Probleme zusammen auf einem 4GB Pi.
Aber ich habe jetzt bei dem Neuen System versucht MotionEye zu öffnen. Leider ebenfalls Still.
MotionEye lläuft aber auf Port 8765. Und wie gesagt, bis gestern vor dem Restore auch ohne Probleme. -
@bill-s-preston sagte in Iobroker startet nicht mehr nach Restore:
Startet noch immer nicht.
was genau?
wie genau?was passiert?
-
@homoran said in Iobroker startet nicht mehr nach Restore:
@bill-s-preston sagte in Iobroker startet nicht mehr nach Restore:
Startet noch immer nicht.
was genau?
wie genau?was passiert?
Iobroker über den Browser aufrufen (192.168.178.68:8081)
Firefox kann keine Verbindung zu dem Server unter 192.168.178.68:8081 aufbauen.Bei MotionEye das gleiche.
-
@bill-s-preston sagte in Iobroker startet nicht mehr nach Restore:
Iobroker über den Browser aufrufen (192.168.178.68:8081)
welcher Browser?
und was exakt steht in der Adresszeile? -
@bill-s-preston sagte in Iobroker startet nicht mehr nach Restore:
Aber ich habe jetzt bei dem Neuen System versucht MotionEye zu öffnen. Leider ebenfalls Still.
Der Service 'failed' ja auch.
Die Adapter 'ws' und 'socketio' bitte auch updaten.
War der 'socketio' nicht ohnehin obsolet? -
@homoran said in Iobroker startet nicht mehr nach Restore:
@bill-s-preston sagte in Iobroker startet nicht mehr nach Restore:
Iobroker über den Browser aufrufen (192.168.178.68:8081)
welcher Browser?
und was exakt steht in der Adresszeile?Unter Firefox und Chrome 192.168.178.68:8081 eingegeben.
-
Kann es sein, dass sich das Backup vom alten System mit dem neuen beißt?
Hier
iob start webvom alten noch laufenden System.
Skript v.2024-04-21 *** BASE SYSTEM *** Static hostname: iobroker Icon name: computer Operating System: Raspbian GNU/Linux 10 (buster) Kernel: Linux 5.10.103-v7l+ Architecture: arm Model : Raspberry Pi 4 Model B Rev 1.1 Docker : false Virtualization : none Kernel : armv7l Userland : 32 bit Systemuptime and Load: 11:23:56 up 11:39, 2 users, load average: 1.59, 1.08, 0.89 CPU threads: 4 *** RASPBERRY THROTTLING *** Current issues: No throttling issues detected. Previously detected issues: No throttling issues detected. *** Time and Time Zones *** Local time: Mon 2024-05-06 11:23:56 CEST Universal time: Mon 2024-05-06 09:23:56 UTC RTC time: n/a Time zone: Europe/Berlin (CEST, +0200) System clock synchronized: yes NTP service: active RTC in local TZ: no *** Users and Groups *** User that called 'iob diag': pi XDG_CONFIG_HOME=/home/pi/.config HOME=/home/pi GROUPS=pi adm dialout cdrom sudo audio video plugdev games users input netdev lpadmin gpio i2c spi iobroker myftp User that is running 'js-controller': iobroker HOME=/home/iobroker GROUPS=iobroker tty dialout audio video bluetooth gpio i2c myftp *** Display-Server-Setup *** Display-Server: true Desktop: LXDE-pi Terminal: x11 Boot Target: graphical.target *** MEMORY *** total used free shared buff/cache available Mem: 3.8G 2.0G 260M 92M 1.6G 1.8G Swap: 99M 42M 57M Total: 3.9G 2.0G 317M Active iob-Instances: 34 3838 M total memory 1980 M used memory 788 M active memory 2619 M inactive memory 259 M free memory 272 M buffer memory 1325 M swap cache 99 M total swap 42 M used swap 57 M free swap *** top - Table Of Processes *** top - 11:23:57 up 11:39, 2 users, load average: 1.59, 1.08, 0.89 Tasks: 209 total, 1 running, 207 sleeping, 0 stopped, 1 zombie %Cpu(s): 7.2 us, 5.8 sy, 0.0 ni, 87.0 id, 0.0 wa, 0.0 hi, 0.0 si, 0.0 st MiB Mem : 3838.7 total, 259.5 free, 1980.4 used, 1598.8 buff/cache MiB Swap: 100.0 total, 57.7 free, 42.2 used. 1826.4 avail Mem *** FAILED SERVICES *** UNIT LOAD ACTIVE SUB DESCRIPTION * bthelper@hci0.service loaded failed failed Raspberry Pi bluetooth helper LOAD = Reflects whether the unit definition was properly loaded. ACTIVE = The high-level unit activation state, i.e. generalization of SUB. SUB = The low-level unit activation state, values depend on unit type. 1 loaded units listed. Pass --all to see loaded but inactive units, too. To show all installed unit files use 'systemctl list-unit-files'. *** FILESYSTEM *** Filesystem Type Size Used Avail Use% Mounted on /dev/root ext4 59G 22G 34G 40% / devtmpfs devtmpfs 1.8G 0 1.8G 0% /dev tmpfs tmpfs 1.9G 864K 1.9G 1% /dev/shm tmpfs tmpfs 1.9G 57M 1.9G 3% /run tmpfs tmpfs 5.0M 4.0K 5.0M 1% /run/lock tmpfs tmpfs 1.9G 0 1.9G 0% /sys/fs/cgroup /dev/sda1 ext4 57G 33G 21G 61% /backup /dev/mmcblk0p1 vfat 253M 49M 204M 20% /boot tmpfs tmpfs 384M 4.0K 384M 1% /run/user/1000 Messages concerning ext4 filesystem in dmesg: [Sun May 5 23:44:18 2024] Kernel command line: coherent_pool=1M 8250.nr_uarts=0 snd_bcm2835.enable_compat_alsa=0 snd_bcm2835.enable_hdmi=1 video=HDMI-A-1:1024x768M@60D smsc95xx.macaddr=DC:A6:32:30:EB:D6 vc_mem.mem_base=0x3ec00000 vc_mem.mem_size=0x40000000 console=ttyS0,115200 console=tty1 root=PARTUUID=5cd8a1b8-02 rootfstype=ext4 elevator=deadline fsck.repair=yes rootwait [Sun May 5 23:44:19 2024] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Opts: (null) [Sun May 5 23:44:19 2024] VFS: Mounted root (ext4 filesystem) readonly on device 179:2. [Sun May 5 23:44:22 2024] EXT4-fs (mmcblk0p2): re-mounted. Opts: (null) [Sun May 5 23:44:25 2024] EXT4-fs (sda1): recovery complete [Sun May 5 23:44:25 2024] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null) Show mounted filesystems: TARGET SOURCE FSTYPE OPTIONS / /dev/mmcblk0p2 ext4 rw,noatime |-/dev devtmpfs devtmpfs rw,relatime,size=1800568k,nr_inodes=84157,mode=755 | |-/dev/shm tmpfs tmpfs rw,nosuid,nodev | |-/dev/pts devpts devpts rw,nosuid,noexec,relatime,gid=5,mode=620,ptmxmode=000 | `-/dev/mqueue mqueue mqueue rw,relatime |-/sys sysfs sysfs rw,nosuid,nodev,noexec,relatime | |-/sys/kernel/security securityfs securityfs rw,nosuid,nodev,noexec,relatime | |-/sys/fs/cgroup tmpfs tmpfs ro,nosuid,nodev,noexec,mode=755 | | |-/sys/fs/cgroup/unified cgroup2 cgroup2 rw,nosuid,nodev,noexec,relatime,nsdelegate | | |-/sys/fs/cgroup/systemd cgroup cgroup rw,nosuid,nodev,noexec,relatime,xattr,name=systemd | | |-/sys/fs/cgroup/blkio cgroup cgroup rw,nosuid,nodev,noexec,relatime,blkio | | |-/sys/fs/cgroup/pids cgroup cgroup rw,nosuid,nodev,noexec,relatime,pids | | |-/sys/fs/cgroup/cpu,cpuacct cgroup cgroup rw,nosuid,nodev,noexec,relatime,cpu,cpuacct | | |-/sys/fs/cgroup/net_cls,net_prio cgroup cgroup rw,nosuid,nodev,noexec,relatime,net_cls,net_prio | | |-/sys/fs/cgroup/freezer cgroup cgroup rw,nosuid,nodev,noexec,relatime,freezer | | |-/sys/fs/cgroup/perf_event cgroup cgroup rw,nosuid,nodev,noexec,relatime,perf_event | | |-/sys/fs/cgroup/devices cgroup cgroup rw,nosuid,nodev,noexec,relatime,devices | | `-/sys/fs/cgroup/cpuset cgroup cgroup rw,nosuid,nodev,noexec,relatime,cpuset | |-/sys/fs/bpf none bpf rw,nosuid,nodev,noexec,relatime,mode=700 | |-/sys/kernel/debug debugfs debugfs rw,relatime | |-/sys/kernel/config configfs configfs rw,relatime | `-/sys/fs/fuse/connections fusectl fusectl rw,relatime |-/proc proc proc rw,relatime | `-/proc/sys/fs/binfmt_misc systemd-1 autofs rw,relatime,fd=28,pgrp=1,timeout=0,minproto=5,maxproto=5,direct |-/run tmpfs tmpfs rw,nosuid,nodev,mode=755 | |-/run/lock tmpfs tmpfs rw,nosuid,nodev,noexec,relatime,size=5120k | |-/run/rpc_pipefs sunrpc rpc_pipefs rw,relatime | `-/run/user/1000 tmpfs tmpfs rw,nosuid,nodev,relatime,size=393084k,mode=700,uid=1000,gid=1000 | `-/run/user/1000/gvfs gvfsd-fuse fuse.gvfsd-fuse rw,nosuid,nodev,relatime,user_id=1000,group_id=1000 |-/backup /dev/sda1 ext4 rw,relatime `-/boot /dev/mmcblk0p1 vfat rw,relatime,fmask=0022,dmask=0022,codepage=437,iocharset=ascii,shortname=mixed,errors=remount-ro Files in neuralgic directories: /var: 2.9G /var/ 1.4G /var/lib 1.2G /var/lib/influxdb/data 1.2G /var/lib/influxdb 1.1G /var/lib/influxdb/data/iobroker Archived and active journals take up 55.9M in the file system. /opt/iobroker/backups: 6.3G /opt/iobroker/backups/ /opt/iobroker/iobroker-data: 414M /opt/iobroker/iobroker-data/ 195M /opt/iobroker/iobroker-data/files 132M /opt/iobroker/iobroker-data/backup-objects 51M /opt/iobroker/iobroker-data/files/javascript.admin 33M /opt/iobroker/iobroker-data/files/web.admin/static The five largest files in iobroker-data are: 24M /opt/iobroker/iobroker-data/files/web.admin/static/js/main.135279a0.js.map 22M /opt/iobroker/iobroker-data/objects.jsonl 18M /opt/iobroker/iobroker-data/states.jsonl 9.7M /opt/iobroker/iobroker-data/objects.json.migrated 9.7M /opt/iobroker/iobroker-data/objects.json.bak.migrated USB-Devices by-id: USB-Sticks - Avoid direct links to /dev/tty* in your adapter setups, please always prefer the links 'by-id': /dev/serial/by-id/usb-Texas_Instruments_XDS110__03.00.00.25__Embed_with_CMSIS-DAP_L1100FNC-if03 /dev/serial/by-id/usb-Texas_Instruments_XDS110__03.00.00.25__Embed_with_CMSIS-DAP_L1100FNC-if00 HINT: Your zigbee.1 COM-Port is NOT matching 'by-id'. Please check your setting: /dev/ttyACM0 *** NodeJS-Installation *** /usr/bin/nodejs v18.20.2 /usr/bin/node v18.20.2 /usr/bin/npm 10.5.0 /usr/bin/npx 10.5.0 /usr/bin/corepack 0.25.2 nodejs: Installed: 18.20.2-1nodesource1 Candidate: 18.20.2-1nodesource1 Version table: *** 18.20.2-1nodesource1 600 500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages 100 /var/lib/dpkg/status 18.20.1-1nodesource1 600 500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages 18.20.0-1nodesource1 600 500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages 18.19.1-1nodesource1 600 500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages 18.19.0-1nodesource1 600 500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages 18.18.2-1nodesource1 600 500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages 18.18.1-1nodesource1 600 500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages 18.18.0-1nodesource1 600 500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages 18.17.1-1nodesource1 600 500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages 18.17.0-1nodesource1 600 500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages 18.16.1-1nodesource1 600 500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages 18.16.0-1nodesource1 600 500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages 18.15.0-1nodesource1 600 500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages 18.14.2-1nodesource1 600 500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages 18.14.1-1nodesource1 600 500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages 18.14.0-1nodesource1 600 500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages 18.13.0-1nodesource1 600 500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages 18.12.0-1nodesource1 600 500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages 18.11.0-1nodesource1 600 500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages 18.10.0-1nodesource1 600 500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages 18.9.1-1nodesource1 600 500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages 18.9.0-1nodesource1 600 500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages 18.8.0-1nodesource1 600 500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages 18.7.0-1nodesource1 600 500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages 18.6.0-1nodesource1 600 500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages 18.5.0-1nodesource1 600 500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages 18.4.0-1nodesource1 600 500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages 18.3.0-1nodesource1 600 500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages 18.2.0-1nodesource1 600 500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages 18.1.0-1nodesource1 600 500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages 18.0.0-1nodesource1 600 500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages 10.24.0~dfsg-1~deb10u3 500 500 http://raspbian.raspberrypi.org/raspbian buster/main armhf Packages Temp directories causing npm8 problem: 0 No problems detected Errors in npm tree: *** ioBroker-Installation *** ioBroker Status iobroker is running on this host. Objects type: jsonl States type: jsonl Core adapters versions js-controller: 4.0.24 admin: 6.13.16 javascript: 6.1.4 nodejs modules from github: 0 Adapter State + system.adapter.admin.0 : admin : iobroker - enabled, port: 7777, bind: 0.0.0.0, run as: admin + system.adapter.backitup.0 : backitup : iobroker - enabled + system.adapter.discovery.0 : discovery : iobroker - enabled system.adapter.dwd.0 : dwd : iobroker - disabled + system.adapter.email.0 : email : iobroker - enabled system.adapter.flot.0 : flot : iobroker - disabled + system.adapter.fullybrowser.0 : fullybrowser : iobroker - enabled + system.adapter.hm-rega.0 : hm-rega : iobroker - enabled + system.adapter.hm-rpc.0 : hm-rpc : iobroker - enabled, port: 0 + system.adapter.hm-rpc.1 : hm-rpc : iobroker - enabled, port: 0 + system.adapter.hm-rpc.2 : hm-rpc : iobroker - enabled, port: 0 + system.adapter.hm-rpc.3 : hm-rpc : iobroker - enabled, port: 0 system.adapter.ical.0 : ical : iobroker - enabled system.adapter.icons-mfd-svg.0 : icons-mfd-svg : iobroker - disabled + system.adapter.influxdb.0 : influxdb : iobroker - enabled, port: 8086 + system.adapter.info.0 : info : iobroker - enabled + system.adapter.javascript.0 : javascript : iobroker - enabled + system.adapter.lgtv.0 : lgtv : iobroker - enabled + system.adapter.meross.0 : meross : iobroker - enabled + system.adapter.mihome-vacuum.0 : mihome-vacuum : iobroker - enabled, port: 54321 + system.adapter.mqtt.0 : mqtt : iobroker - enabled, port: 1882, bind: 192.168.178.23 + system.adapter.mqtt.1 : mqtt : iobroker - enabled, port: 1886, bind: 0.0.0.0 + system.adapter.onvif.0 : onvif : iobroker - enabled + system.adapter.openweathermap.0 : openweathermap : iobroker - enabled + system.adapter.pushover.0 : pushover : iobroker - enabled + system.adapter.rpi2.0 : rpi2 : iobroker - enabled + system.adapter.sayit.0 : sayit : iobroker - enabled, port: 0 + system.adapter.shelly.0 : shelly : iobroker - enabled, port: 1883 + system.adapter.sonoff.0 : sonoff : iobroker - enabled, port: 1884, bind: 0.0.0.0 + system.adapter.sourceanalytix.0 : sourceanalytix : iobroker - enabled + system.adapter.telegram.0 : telegram : iobroker - enabled, port: 8443, bind: 0.0.0.0 + system.adapter.text2command.0 : text2command : iobroker - enabled + system.adapter.tr-064.0 : tr-064 : iobroker - enabled system.adapter.vis-hqwidgets.0 : vis-hqwidgets : iobroker - disabled system.adapter.vis-icontwo.0 : vis-icontwo : iobroker - disabled + system.adapter.vis-inventwo.0 : vis-inventwo : iobroker - enabled system.adapter.vis-jqui-mfd.0 : vis-jqui-mfd : iobroker - enabled system.adapter.vis-justgage.0 : vis-justgage : iobroker - disabled system.adapter.vis-material-advanced.0 : vis-material-advanced : iobroker - disabled system.adapter.vis-timeandweather.0 : vis-timeandweather : iobroker - disabled system.adapter.vis-weather.0 : vis-weather : iobroker - enabled system.adapter.vis.0 : vis : iobroker - enabled + system.adapter.web.0 : web : iobroker - enabled, port: 8082, bind: 0.0.0.0, run as: admin + system.adapter.worx.0 : worx : iobroker - enabled + system.adapter.zigbee.1 : zigbee : iobroker - enabled, port: /dev/ttyACM0 + instance is alive Enabled adapters with bindings + system.adapter.admin.0 : admin : iobroker - enabled, port: 7777, bind: 0.0.0.0, run as: admin + system.adapter.hm-rpc.0 : hm-rpc : iobroker - enabled, port: 0 + system.adapter.hm-rpc.1 : hm-rpc : iobroker - enabled, port: 0 + system.adapter.hm-rpc.2 : hm-rpc : iobroker - enabled, port: 0 + system.adapter.hm-rpc.3 : hm-rpc : iobroker - enabled, port: 0 + system.adapter.influxdb.0 : influxdb : iobroker - enabled, port: 8086 + system.adapter.mihome-vacuum.0 : mihome-vacuum : iobroker - enabled, port: 54321 + system.adapter.mqtt.0 : mqtt : iobroker - enabled, port: 1882, bind: 192.168.178.23 + system.adapter.mqtt.1 : mqtt : iobroker - enabled, port: 1886, bind: 0.0.0.0 + system.adapter.sayit.0 : sayit : iobroker - enabled, port: 0 + system.adapter.shelly.0 : shelly : iobroker - enabled, port: 1883 + system.adapter.sonoff.0 : sonoff : iobroker - enabled, port: 1884, bind: 0.0.0.0 + system.adapter.telegram.0 : telegram : iobroker - enabled, port: 8443, bind: 0.0.0.0 + system.adapter.web.0 : web : iobroker - enabled, port: 8082, bind: 0.0.0.0, run as: admin + system.adapter.zigbee.1 : zigbee : iobroker - enabled, port: /dev/ttyACM0 ioBroker-Repositories Stable (default): http://download.iobroker.net/sources-dist.json Beta (latest) : http://download.iobroker.net/sources-dist-latest.json Active repo(s): Stable (default) Installed ioBroker-Instances Used repository: Stable (default) Adapter "admin" : 6.13.16 , installed 6.13.16 Adapter "backitup" : 2.11.0 , installed 2.11.0 Adapter "cloud" : 5.0.1 , installed 4.1.0 [Updatable] Adapter "discovery" : 4.4.0 , installed 2.6.1 [Updatable] Adapter "dwd" : 2.8.5 , installed 2.8.3 [Updatable] Adapter "email" : 1.2.2 , installed 1.0.9 [Updatable] Adapter "flot" : 1.12.0 , installed 1.10.6 [Updatable] Adapter "fritzbox" : 0.6.0 , installed 0.2.1 [Updatable] Adapter "fullybrowser" : 3.0.12 , installed 2.1.2 [Updatable] Adapter "heatingcontrol": 2.12.5 , installed 2.3.2 [Updatable] Adapter "hm-rega" : 4.0.0 , installed 4.0.0 Adapter "hm-rpc" : 1.17.0 , installed 1.15.16 [Updatable] Adapter "ical" : 1.14.3 , installed 1.7.4 [Updatable] Adapter "icons-mfd-svg": 1.2.0 , installed 1.0.2 [Updatable] Adapter "influxdb" : 4.0.2 , installed 4.0.2 Adapter "javascript" : 7.8.0 , installed 6.1.4 [Updatable] Controller "js-controller": 5.0.19 , installed 4.0.24 [Updatable] Adapter "lgtv" : 2.2.0 , installed 2.1.1 [Updatable] Adapter "meross" : 1.17.0 , installed 1.17.0 Adapter "mihome" : 1.4.0 , installed 1.4.0 Adapter "mihome-vacuum": 4.2.0 , installed 4.0.0 [Updatable] Adapter "mqtt" : 5.2.0 , installed 2.4.0 [Updatable] Adapter "onvif" : 1.1.3 , installed 0.4.4 [Updatable] Adapter "openweathermap": 1.0.4 , installed 0.3.3 [Updatable] Adapter "paw" : 0.3.2 , installed 0.3.2 Adapter "pushover" : 3.0.6 , installed 3.0.6 Adapter "rpi2" : 1.3.2 , installed 1.3.2 Adapter "sayit" : 3.0.5 , installed 1.12.3 [Updatable] Adapter "shelly" : 6.9.0 , installed 6.3.1 [Updatable] Adapter "simple-api" : 2.7.2 , installed 2.7.2 Adapter "socketio" : 6.7.0 , installed 6.6.1 [Updatable] Adapter "sonoff" : 3.0.3 , installed 2.5.3 [Updatable] Adapter "telegram" : 3.2.1 , installed 1.8.1 [Updatable] Adapter "text2command" : 3.0.3 , installed 2.3.0 [Updatable] Adapter "tr-064" : 4.2.18 , installed 4.2.18 Adapter "vis" : 1.5.4 , installed 1.5.4 Adapter "vis-hqwidgets": 1.5.1 , installed 1.3.0 [Updatable] Adapter "vis-icontwo" : 1.5.0 , installed 0.93.0 [Updatable] Adapter "vis-inventwo" : 3.3.4 , installed 3.3.3 [Updatable] Adapter "vis-jqui-mfd" : 1.1.1 , installed 1.0.12 [Updatable] Adapter "vis-justgage" : 2.1.7 , installed 1.0.2 [Updatable] Adapter "vis-material-advanced": 1.7.4, installed 1.7.2 [Updatable] Adapter "vis-timeandweather": 1.2.2, installed 1.2.2 Adapter "vis-weather" : 2.5.9 , installed 2.5.6 [Updatable] Adapter "web" : 6.2.5 , installed 6.2.5 Adapter "whatsapp-cmb" : 0.2.3 , installed 0.2.3 Adapter "worx" : 2.3.4 , installed 2.3.4 Adapter "ws" : 2.6.1 , installed 2.5.11 [Updatable] Adapter "yr" : 5.3.0 , installed 5.3.0 Adapter "zigbee" : 1.10.3 , installed 1.10.3 Objects and States Please stand by - This may take a while Objects: 11713 States: 10121 *** OS-Repositories and Updates *** W: An error occurred during the signature verification. The repository is not updated and the previous index files will be used. GPG error: https://repos.influxdata.com/debian buster InRelease: The following signatures couldn't be verified because the public key is not available: NO_PUBKEY D8FF8E1F7DF8B07E W: Failed to fetch https://repos.influxdata.com/debian/dists/buster/InRelease The following signatures couldn't be verified because the public key is not available: NO_PUBKEY D8FF8E1F7DF8B07E W: Some index files failed to download. They have been ignored, or old ones used instead. Hit:1 http://raspbian.raspberrypi.org/raspbian buster InRelease Get:2 https://repos.influxdata.com/debian buster InRelease [12.9 kB] Hit:3 http://archive.raspberrypi.org/debian buster InRelease Hit:4 https://deb.nodesource.com/node_18.x nodistro InRelease Err:2 https://repos.influxdata.com/debian buster InRelease The following signatures couldn't be verified because the public key is not available: NO_PUBKEY D8FF8E1F7DF8B07E Fetched 12.9 kB in 2s (8498 B/s) Reading package lists... W: An error occurred during the signature verification. The repository is not updated and the previous index files will be used. GPG error: https://repos.influxdata.com/debian buster InRelease: The following signatures couldn't be verified because the public key is not available: NO_PUBKEY D8FF8E1F7DF8B07E W: Failed to fetch https://repos.influxdata.com/debian/dists/buster/InRelease The following signatures couldn't be verified because the public key is not available: NO_PUBKEY D8FF8E1F7DF8B07E W: Some index files failed to download. They have been ignored, or old ones used instead. Pending Updates: 0 *** Listening Ports *** Active Internet connections (only servers) Proto Recv-Q Send-Q Local Address Foreign Address State User Inode PID/Program name tcp 0 0 192.168.178.23:2001 0.0.0.0:* LISTEN 1001 536573 3566/io.hm-rpc.3 tcp 0 0 0.0.0.0:21 0.0.0.0:* LISTEN 117 19738 705/proftpd: (accep tcp 0 0 0.0.0.0:22 0.0.0.0:* LISTEN 0 18287 559/sshd tcp 0 0 127.0.0.1:631 0.0.0.0:* LISTEN 0 41534 3077/cupsd tcp 0 0 0.0.0.0:5656 0.0.0.0:* LISTEN 0 18860 779/motion tcp 0 0 127.0.0.1:8088 0.0.0.0:* LISTEN 999 19649 517/influxd tcp 0 0 192.168.178.23:2010 0.0.0.0:* LISTEN 1001 539134 3448/io.hm-rpc.1 tcp 0 0 192.168.178.23:1882 0.0.0.0:* LISTEN 1001 539067 3394/io.mqtt.0 tcp 0 0 0.0.0.0:9595 0.0.0.0:* LISTEN 0 18861 779/motion tcp 0 0 0.0.0.0:1884 0.0.0.0:* LISTEN 1001 539216 3521/io.sonoff.0 tcp 0 0 192.168.178.23:8701 0.0.0.0:* LISTEN 1001 539127 3441/io.hm-rpc.0 tcp 0 0 0.0.0.0:8765 0.0.0.0:* LISTEN 0 18979 428/python2 tcp 0 0 0.0.0.0:7070 0.0.0.0:* LISTEN 0 14225 526/anydesk tcp 0 0 127.0.0.1:7999 0.0.0.0:* LISTEN 0 18862 779/motion tcp 0 0 0.0.0.0:38149 0.0.0.0:* LISTEN 0 525839 526/anydesk tcp 0 0 127.0.0.1:9000 0.0.0.0:* LISTEN 1001 536192 3307/iobroker.js-co tcp 0 0 127.0.0.1:9001 0.0.0.0:* LISTEN 1001 536185 3307/iobroker.js-co tcp 0 0 192.168.178.23:9292 0.0.0.0:* LISTEN 1001 541006 3463/io.hm-rpc.2 tcp6 0 0 :::8082 :::* LISTEN 1001 541910 3710/io.web.0 tcp6 0 0 :::8086 :::* LISTEN 999 22642 517/influxd tcp6 0 0 :::22 :::* LISTEN 0 18289 559/sshd tcp6 0 0 ::1:631 :::* LISTEN 0 41533 3077/cupsd tcp6 0 0 :::3000 :::* LISTEN 110 20755 513/grafana-server tcp6 0 0 :::7777 :::* LISTEN 1001 538566 3325/io.admin.0 udp 0 0 0.0.0.0:5683 0.0.0.0:* 1001 540354 3502/io.shelly.0 udp 0 0 0.0.0.0:68 0.0.0.0:* 0 19750 445/dhcpcd udp 0 0 0.0.0.0:631 0.0.0.0:* 0 41552 3079/cups-browsed udp 0 0 0.0.0.0:53421 0.0.0.0:* 1001 541081 3536/io.mihome-vacu udp 0 0 192.168.178.23:5353 0.0.0.0:* 1001 539137 3420/io.tr-064.0 udp 0 0 0.0.0.0:5353 0.0.0.0:* 108 17531 374/avahi-daemon: r udp 0 0 0.0.0.0:47875 0.0.0.0:* 108 17533 374/avahi-daemon: r udp 0 0 0.0.0.0:50001 0.0.0.0:* 0 22556 526/anydesk udp6 0 0 :::5353 :::* 108 17532 374/avahi-daemon: r udp6 0 0 :::33120 :::* 108 17534 374/avahi-daemon: r *** Log File - Last 25 Lines *** 2024-05-06 11:24:16.473 - warn: javascript.0 (3382) at processImmediate (node:internal/timers:476:21) 2024-05-06 11:24:16.473 - warn: javascript.0 (3382) State "javascript.0.Stromverbrauch.Stromkosten_vorheriger_Tag" not found 2024-05-06 11:24:16.475 - warn: javascript.0 (3382) at setState (/opt/iobroker/node_modules/iobroker.javascript/lib/sandbox.js:1719:20) 2024-05-06 11:24:16.475 - warn: javascript.0 (3382) at Object.<anonymous> (script.js.Verbräuche.Stromverbrauch_gestern:5:3) 2024-05-06 11:24:16.477 - warn: javascript.0 (3382) at Object.callback (/opt/iobroker/node_modules/iobroker.javascript/lib/sandbox.js:1244:38) 2024-05-06 11:24:16.477 - warn: javascript.0 (3382) at Object.stateChange (/opt/iobroker/node_modules/iobroker.javascript/main.js:593:29) 2024-05-06 11:24:16.478 - warn: javascript.0 (3382) at Immediate._onImmediate (/opt/iobroker/node_modules/@iobroker/js-controller-adapter/src/lib/adapter/adapter.js:5916:56) 2024-05-06 11:24:16.478 - warn: javascript.0 (3382) at processImmediate (node:internal/timers:476:21) 2024-05-06 11:24:21.813 - info: meross.0 (3483) Can not get Data for Device 1909127883156625186348e1e9034905: Error: Timeout 2024-05-06 11:24:21.814 - warn: meross.0 (3483) Can not get Data for Device 1909127883156625186348e1e9034905: undefined 2024-05-06 11:24:21.835 - info: meross.0 (3483) Can not get Data for Device 1801301547342725131134298f115e90: Error: Timeout 2024-05-06 11:24:21.836 - warn: meross.0 (3483) Can not get Data for Device 1801301547342725131134298f115e90: undefined 2024-05-06 11:24:21.864 - info: meross.0 (3483) Can not get Data for Device 1801306356734125131134298f115f59: Error: Timeout 2024-05-06 11:24:21.865 - warn: meross.0 (3483) Can not get Data for Device 1801306356734125131134298f115f59: undefined 2024-05-06 11:24:21.899 - info: meross.0 (3483) Can not get Data for Device 1801300540186725131134298f115ef4: Error: Timeout 2024-05-06 11:24:21.900 - warn: meross.0 (3483) Can not get Data for Device 1801300540186725131134298f115ef4: undefined 2024-05-06 11:24:40.484 - debug: onvif.0 (3778) startCameras 2024-05-06 11:24:40.521 - debug: onvif.0 (3778) getDevices: [{"type":"device","common":{"name":"192_168_178_47_8899"},"native":{"id":"192_168_178_47_8899","name":"192.168.178.47:8899","ip":"192.168.178.47","port":"8899","user":"C5Xz73SD","password":"XEDRuAwrFddzE9XP","cam_date":"2021-05-18T14:58:39.000Z","info":{"manufacturer":"WVC","model":"W5S","firmwareVersion":"07.26200.05.04","serialNumber":"WVCA98KGIRPCRUMC","hardwareId":"FFFFFFE0-09-FFFFFFBF-6F-33-15"},"events":true,"subscribeEvents":true,"live_stream_tcp":{"uri":"rtsp://192.168.178.47:554/live/ch0?token=12fb11e6e41ab914a76c533db4359c24","invalidAfterConnect":false,"invalidAfterReboot":false,"timeout":"PT0H50M0S"},"live_stream_udp":{"uri":"rtsp://192.168.178.47:554/live/ch0?token=12fb11e6e41ab914a76c533db4359c24","invalidAfterConnect":false,"invalidAfterReboot":false,"timeout":"PT0H50M0S"},"live_stream_multicast":{"uri":"rtsp://192.168.178.47:554/live/ch0?token=12fb11e6e41ab914a76c533db4359c24","invalidAfterConnect":false,"invalidAfterReboot":false,"timeout":"PT0H50M0S"}},"from":"system.adapter.onvif.0","user":"system.user.admin","ts":1676755611510,"_id":"onvif.0.192_168_178_47_8899","acl":{"object":1636,"owner":"system.user.admin","ownerGroup":"system.group.administrator"}}] 2024-05-06 11:24:40.522 - debug: onvif.0 (3778) setCameras: [{"type":"device","common":{"name":"192_168_178_47_8899"},"native":{"id":"192_168_178_47_8899","name":"192.168.178.47:8899","ip":"192.168.178.47","port":"8899","user":"C5Xz73SD","password":"XEDRuAwrFddzE9XP","cam_date":"2021-05-18T14:58:39.000Z","info":{"manufacturer":"WVC","model":"W5S","firmwareVersion":"07.26200.05.04","serialNumber":"WVCA98KGIRPCRUMC","hardwareId":"FFFFFFE0-09-FFFFFFBF-6F-33-15"},"events":true,"subscribeEvents":true,"live_stream_tcp":{"uri":"rtsp://192.168.178.47:554/live/ch0?token=12fb11e6e41ab914a76c533db4359c24","invalidAfterConnect":false,"invalidAfterReboot":false,"timeout":"PT0H50M0S"},"live_stream_udp":{"uri":"rtsp://192.168.178.47:554/live/ch0?token=12fb11e6e41ab914a76c533db4359c24","invalidAfterConnect":false,"invalidAfterReboot":false,"timeout":"PT0H50M0S"},"live_stream_multicast":{"uri":"rtsp://192.168.178.47:554/live/ch0?token=12fb11e6e41ab914a76c533db4359c24","invalidAfterConnect":false,"invalidAfterReboot":false,"timeout":"PT0H50M0S"}},"from":"system.adapter.onvif.0","user":"system.user.admin","ts":1676755611510,"_id":"onvif.0.192_168_178_47_8899","acl":{"object":1636,"owner":"system.user.admin","ownerGroup":"system.group.administrator"}}] 2024-05-06 11:24:40.523 - debug: onvif.0 (3778) classCam: item = {"type":"device","common":{"name":"192_168_178_47_8899"},"native":{"id":"192_168_178_47_8899","name":"192.168.178.47:8899","ip":"192.168.178.47","port":"8899","user":"C5Xz73SD","password":"XEDRuAwrFddzE9XP","cam_date":"2021-05-18T14:58:39.000Z","info":{"manufacturer":"WVC","model":"W5S","firmwareVersion":"07.26200.05.04","serialNumber":"WVCA98KGIRPCRUMC","hardwareId":"FFFFFFE0-09-FFFFFFBF-6F-33-15"},"events":true,"subscribeEvents":true,"live_stream_tcp":{"uri":"rtsp://192.168.178.47:554/live/ch0?token=12fb11e6e41ab914a76c533db4359c24","invalidAfterConnect":false,"invalidAfterReboot":false,"timeout":"PT0H50M0S"},"live_stream_udp":{"uri":"rtsp://192.168.178.47:554/live/ch0?token=12fb11e6e41ab914a76c533db4359c24","invalidAfterConnect":false,"invalidAfterReboot":false,"timeout":"PT0H50M0S"},"live_stream_multicast":{"uri":"rtsp://192.168.178.47:554/live/ch0?token=12fb11e6e41ab914a76c533db4359c24","invalidAfterConnect":false,"invalidAfterReboot":false,"timeout":"PT0H50M0S"}},"from":"system.adapter.onvif.0","user":"system.user.admin","ts":1676755611510,"_id":"onvif.0.192_168_178_47_8899","acl":{"object":1636,"owner":"system.user.admin","ownerGroup":"system.group.administrator"}} 2024-05-06 11:24:43.681 - error: onvif.0 (3778) classCam. Camera/NVT: "192.168.178.47:8899" Error: connect EHOSTUNREACH 192.168.178.47:8899 2024-05-06 11:24:43.682 - debug: onvif.0 (3778) startCameras. cameras: {} 2024-05-06 11:24:43.682 - warn: onvif.0 (3778) startCameras: Cameras/NVT unavailables 2024-05-06 11:24:52.570 - warn: mqtt.0 (3394) Client [shelly1-E8DB84D496EE] has invalid password(h65cgi) or username(iobroker) 2024-05-06 11:25:08.865 - warn: telegram.0 (3790) 1 of 1 recipients are unknown!Hier läuft noch der js-controller: 4.0.24. Im neuen ist der 5.0.19.
Wie update ich den ? -
@bill-s-preston sagte in Iobroker startet nicht mehr nach Restore:
Kann es sein, dass sich das Backup vom alten System mit dem neuen beißt?
Das kann schon sein. Das Alt-System verdient sich diesen Namen ja ganz besonders...
Bring das zuerst mal auf Stand und dann ziehst du mit einem aktuellen Backup um.
-
Wieso aktualisiert sich der js-controller mit
obroker stop iobroker update iobroker upgrade self iobroker startnicht?
-
Ohne Meldungen kann dir das keiner sagen.
