Iobroker startet nicht mehr nach Restore
-
@bill-s-preston sagte in Iobroker startet nicht mehr nach Restore:
Startet noch immer nicht.
was genau?
wie genau?was passiert?
-
@homoran said in Iobroker startet nicht mehr nach Restore:
@bill-s-preston sagte in Iobroker startet nicht mehr nach Restore:
Startet noch immer nicht.
was genau?
wie genau?was passiert?
Iobroker über den Browser aufrufen (192.168.178.68:8081)
Firefox kann keine Verbindung zu dem Server unter 192.168.178.68:8081 aufbauen.Bei MotionEye das gleiche.
-
@bill-s-preston sagte in Iobroker startet nicht mehr nach Restore:
Iobroker über den Browser aufrufen (192.168.178.68:8081)
welcher Browser?
und was exakt steht in der Adresszeile? -
@bill-s-preston sagte in Iobroker startet nicht mehr nach Restore:
Aber ich habe jetzt bei dem Neuen System versucht MotionEye zu öffnen. Leider ebenfalls Still.
Der Service 'failed' ja auch.
Die Adapter 'ws' und 'socketio' bitte auch updaten.
War der 'socketio' nicht ohnehin obsolet? -
@homoran said in Iobroker startet nicht mehr nach Restore:
@bill-s-preston sagte in Iobroker startet nicht mehr nach Restore:
Iobroker über den Browser aufrufen (192.168.178.68:8081)
welcher Browser?
und was exakt steht in der Adresszeile?Unter Firefox und Chrome 192.168.178.68:8081 eingegeben.
-
Kann es sein, dass sich das Backup vom alten System mit dem neuen beißt?
Hier
iob start webvom alten noch laufenden System.
Skript v.2024-04-21 *** BASE SYSTEM *** Static hostname: iobroker Icon name: computer Operating System: Raspbian GNU/Linux 10 (buster) Kernel: Linux 5.10.103-v7l+ Architecture: arm Model : Raspberry Pi 4 Model B Rev 1.1 Docker : false Virtualization : none Kernel : armv7l Userland : 32 bit Systemuptime and Load: 11:23:56 up 11:39, 2 users, load average: 1.59, 1.08, 0.89 CPU threads: 4 *** RASPBERRY THROTTLING *** Current issues: No throttling issues detected. Previously detected issues: No throttling issues detected. *** Time and Time Zones *** Local time: Mon 2024-05-06 11:23:56 CEST Universal time: Mon 2024-05-06 09:23:56 UTC RTC time: n/a Time zone: Europe/Berlin (CEST, +0200) System clock synchronized: yes NTP service: active RTC in local TZ: no *** Users and Groups *** User that called 'iob diag': pi XDG_CONFIG_HOME=/home/pi/.config HOME=/home/pi GROUPS=pi adm dialout cdrom sudo audio video plugdev games users input netdev lpadmin gpio i2c spi iobroker myftp User that is running 'js-controller': iobroker HOME=/home/iobroker GROUPS=iobroker tty dialout audio video bluetooth gpio i2c myftp *** Display-Server-Setup *** Display-Server: true Desktop: LXDE-pi Terminal: x11 Boot Target: graphical.target *** MEMORY *** total used free shared buff/cache available Mem: 3.8G 2.0G 260M 92M 1.6G 1.8G Swap: 99M 42M 57M Total: 3.9G 2.0G 317M Active iob-Instances: 34 3838 M total memory 1980 M used memory 788 M active memory 2619 M inactive memory 259 M free memory 272 M buffer memory 1325 M swap cache 99 M total swap 42 M used swap 57 M free swap *** top - Table Of Processes *** top - 11:23:57 up 11:39, 2 users, load average: 1.59, 1.08, 0.89 Tasks: 209 total, 1 running, 207 sleeping, 0 stopped, 1 zombie %Cpu(s): 7.2 us, 5.8 sy, 0.0 ni, 87.0 id, 0.0 wa, 0.0 hi, 0.0 si, 0.0 st MiB Mem : 3838.7 total, 259.5 free, 1980.4 used, 1598.8 buff/cache MiB Swap: 100.0 total, 57.7 free, 42.2 used. 1826.4 avail Mem *** FAILED SERVICES *** UNIT LOAD ACTIVE SUB DESCRIPTION * bthelper@hci0.service loaded failed failed Raspberry Pi bluetooth helper LOAD = Reflects whether the unit definition was properly loaded. ACTIVE = The high-level unit activation state, i.e. generalization of SUB. SUB = The low-level unit activation state, values depend on unit type. 1 loaded units listed. Pass --all to see loaded but inactive units, too. To show all installed unit files use 'systemctl list-unit-files'. *** FILESYSTEM *** Filesystem Type Size Used Avail Use% Mounted on /dev/root ext4 59G 22G 34G 40% / devtmpfs devtmpfs 1.8G 0 1.8G 0% /dev tmpfs tmpfs 1.9G 864K 1.9G 1% /dev/shm tmpfs tmpfs 1.9G 57M 1.9G 3% /run tmpfs tmpfs 5.0M 4.0K 5.0M 1% /run/lock tmpfs tmpfs 1.9G 0 1.9G 0% /sys/fs/cgroup /dev/sda1 ext4 57G 33G 21G 61% /backup /dev/mmcblk0p1 vfat 253M 49M 204M 20% /boot tmpfs tmpfs 384M 4.0K 384M 1% /run/user/1000 Messages concerning ext4 filesystem in dmesg: [Sun May 5 23:44:18 2024] Kernel command line: coherent_pool=1M 8250.nr_uarts=0 snd_bcm2835.enable_compat_alsa=0 snd_bcm2835.enable_hdmi=1 video=HDMI-A-1:1024x768M@60D smsc95xx.macaddr=DC:A6:32:30:EB:D6 vc_mem.mem_base=0x3ec00000 vc_mem.mem_size=0x40000000 console=ttyS0,115200 console=tty1 root=PARTUUID=5cd8a1b8-02 rootfstype=ext4 elevator=deadline fsck.repair=yes rootwait [Sun May 5 23:44:19 2024] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Opts: (null) [Sun May 5 23:44:19 2024] VFS: Mounted root (ext4 filesystem) readonly on device 179:2. [Sun May 5 23:44:22 2024] EXT4-fs (mmcblk0p2): re-mounted. Opts: (null) [Sun May 5 23:44:25 2024] EXT4-fs (sda1): recovery complete [Sun May 5 23:44:25 2024] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null) Show mounted filesystems: TARGET SOURCE FSTYPE OPTIONS / /dev/mmcblk0p2 ext4 rw,noatime |-/dev devtmpfs devtmpfs rw,relatime,size=1800568k,nr_inodes=84157,mode=755 | |-/dev/shm tmpfs tmpfs rw,nosuid,nodev | |-/dev/pts devpts devpts rw,nosuid,noexec,relatime,gid=5,mode=620,ptmxmode=000 | `-/dev/mqueue mqueue mqueue rw,relatime |-/sys sysfs sysfs rw,nosuid,nodev,noexec,relatime | |-/sys/kernel/security securityfs securityfs rw,nosuid,nodev,noexec,relatime | |-/sys/fs/cgroup tmpfs tmpfs ro,nosuid,nodev,noexec,mode=755 | | |-/sys/fs/cgroup/unified cgroup2 cgroup2 rw,nosuid,nodev,noexec,relatime,nsdelegate | | |-/sys/fs/cgroup/systemd cgroup cgroup rw,nosuid,nodev,noexec,relatime,xattr,name=systemd | | |-/sys/fs/cgroup/blkio cgroup cgroup rw,nosuid,nodev,noexec,relatime,blkio | | |-/sys/fs/cgroup/pids cgroup cgroup rw,nosuid,nodev,noexec,relatime,pids | | |-/sys/fs/cgroup/cpu,cpuacct cgroup cgroup rw,nosuid,nodev,noexec,relatime,cpu,cpuacct | | |-/sys/fs/cgroup/net_cls,net_prio cgroup cgroup rw,nosuid,nodev,noexec,relatime,net_cls,net_prio | | |-/sys/fs/cgroup/freezer cgroup cgroup rw,nosuid,nodev,noexec,relatime,freezer | | |-/sys/fs/cgroup/perf_event cgroup cgroup rw,nosuid,nodev,noexec,relatime,perf_event | | |-/sys/fs/cgroup/devices cgroup cgroup rw,nosuid,nodev,noexec,relatime,devices | | `-/sys/fs/cgroup/cpuset cgroup cgroup rw,nosuid,nodev,noexec,relatime,cpuset | |-/sys/fs/bpf none bpf rw,nosuid,nodev,noexec,relatime,mode=700 | |-/sys/kernel/debug debugfs debugfs rw,relatime | |-/sys/kernel/config configfs configfs rw,relatime | `-/sys/fs/fuse/connections fusectl fusectl rw,relatime |-/proc proc proc rw,relatime | `-/proc/sys/fs/binfmt_misc systemd-1 autofs rw,relatime,fd=28,pgrp=1,timeout=0,minproto=5,maxproto=5,direct |-/run tmpfs tmpfs rw,nosuid,nodev,mode=755 | |-/run/lock tmpfs tmpfs rw,nosuid,nodev,noexec,relatime,size=5120k | |-/run/rpc_pipefs sunrpc rpc_pipefs rw,relatime | `-/run/user/1000 tmpfs tmpfs rw,nosuid,nodev,relatime,size=393084k,mode=700,uid=1000,gid=1000 | `-/run/user/1000/gvfs gvfsd-fuse fuse.gvfsd-fuse rw,nosuid,nodev,relatime,user_id=1000,group_id=1000 |-/backup /dev/sda1 ext4 rw,relatime `-/boot /dev/mmcblk0p1 vfat rw,relatime,fmask=0022,dmask=0022,codepage=437,iocharset=ascii,shortname=mixed,errors=remount-ro Files in neuralgic directories: /var: 2.9G /var/ 1.4G /var/lib 1.2G /var/lib/influxdb/data 1.2G /var/lib/influxdb 1.1G /var/lib/influxdb/data/iobroker Archived and active journals take up 55.9M in the file system. /opt/iobroker/backups: 6.3G /opt/iobroker/backups/ /opt/iobroker/iobroker-data: 414M /opt/iobroker/iobroker-data/ 195M /opt/iobroker/iobroker-data/files 132M /opt/iobroker/iobroker-data/backup-objects 51M /opt/iobroker/iobroker-data/files/javascript.admin 33M /opt/iobroker/iobroker-data/files/web.admin/static The five largest files in iobroker-data are: 24M /opt/iobroker/iobroker-data/files/web.admin/static/js/main.135279a0.js.map 22M /opt/iobroker/iobroker-data/objects.jsonl 18M /opt/iobroker/iobroker-data/states.jsonl 9.7M /opt/iobroker/iobroker-data/objects.json.migrated 9.7M /opt/iobroker/iobroker-data/objects.json.bak.migrated USB-Devices by-id: USB-Sticks - Avoid direct links to /dev/tty* in your adapter setups, please always prefer the links 'by-id': /dev/serial/by-id/usb-Texas_Instruments_XDS110__03.00.00.25__Embed_with_CMSIS-DAP_L1100FNC-if03 /dev/serial/by-id/usb-Texas_Instruments_XDS110__03.00.00.25__Embed_with_CMSIS-DAP_L1100FNC-if00 HINT: Your zigbee.1 COM-Port is NOT matching 'by-id'. Please check your setting: /dev/ttyACM0 *** NodeJS-Installation *** /usr/bin/nodejs v18.20.2 /usr/bin/node v18.20.2 /usr/bin/npm 10.5.0 /usr/bin/npx 10.5.0 /usr/bin/corepack 0.25.2 nodejs: Installed: 18.20.2-1nodesource1 Candidate: 18.20.2-1nodesource1 Version table: *** 18.20.2-1nodesource1 600 500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages 100 /var/lib/dpkg/status 18.20.1-1nodesource1 600 500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages 18.20.0-1nodesource1 600 500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages 18.19.1-1nodesource1 600 500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages 18.19.0-1nodesource1 600 500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages 18.18.2-1nodesource1 600 500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages 18.18.1-1nodesource1 600 500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages 18.18.0-1nodesource1 600 500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages 18.17.1-1nodesource1 600 500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages 18.17.0-1nodesource1 600 500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages 18.16.1-1nodesource1 600 500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages 18.16.0-1nodesource1 600 500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages 18.15.0-1nodesource1 600 500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages 18.14.2-1nodesource1 600 500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages 18.14.1-1nodesource1 600 500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages 18.14.0-1nodesource1 600 500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages 18.13.0-1nodesource1 600 500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages 18.12.0-1nodesource1 600 500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages 18.11.0-1nodesource1 600 500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages 18.10.0-1nodesource1 600 500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages 18.9.1-1nodesource1 600 500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages 18.9.0-1nodesource1 600 500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages 18.8.0-1nodesource1 600 500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages 18.7.0-1nodesource1 600 500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages 18.6.0-1nodesource1 600 500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages 18.5.0-1nodesource1 600 500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages 18.4.0-1nodesource1 600 500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages 18.3.0-1nodesource1 600 500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages 18.2.0-1nodesource1 600 500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages 18.1.0-1nodesource1 600 500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages 18.0.0-1nodesource1 600 500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages 10.24.0~dfsg-1~deb10u3 500 500 http://raspbian.raspberrypi.org/raspbian buster/main armhf Packages Temp directories causing npm8 problem: 0 No problems detected Errors in npm tree: *** ioBroker-Installation *** ioBroker Status iobroker is running on this host. Objects type: jsonl States type: jsonl Core adapters versions js-controller: 4.0.24 admin: 6.13.16 javascript: 6.1.4 nodejs modules from github: 0 Adapter State + system.adapter.admin.0 : admin : iobroker - enabled, port: 7777, bind: 0.0.0.0, run as: admin + system.adapter.backitup.0 : backitup : iobroker - enabled + system.adapter.discovery.0 : discovery : iobroker - enabled system.adapter.dwd.0 : dwd : iobroker - disabled + system.adapter.email.0 : email : iobroker - enabled system.adapter.flot.0 : flot : iobroker - disabled + system.adapter.fullybrowser.0 : fullybrowser : iobroker - enabled + system.adapter.hm-rega.0 : hm-rega : iobroker - enabled + system.adapter.hm-rpc.0 : hm-rpc : iobroker - enabled, port: 0 + system.adapter.hm-rpc.1 : hm-rpc : iobroker - enabled, port: 0 + system.adapter.hm-rpc.2 : hm-rpc : iobroker - enabled, port: 0 + system.adapter.hm-rpc.3 : hm-rpc : iobroker - enabled, port: 0 system.adapter.ical.0 : ical : iobroker - enabled system.adapter.icons-mfd-svg.0 : icons-mfd-svg : iobroker - disabled + system.adapter.influxdb.0 : influxdb : iobroker - enabled, port: 8086 + system.adapter.info.0 : info : iobroker - enabled + system.adapter.javascript.0 : javascript : iobroker - enabled + system.adapter.lgtv.0 : lgtv : iobroker - enabled + system.adapter.meross.0 : meross : iobroker - enabled + system.adapter.mihome-vacuum.0 : mihome-vacuum : iobroker - enabled, port: 54321 + system.adapter.mqtt.0 : mqtt : iobroker - enabled, port: 1882, bind: 192.168.178.23 + system.adapter.mqtt.1 : mqtt : iobroker - enabled, port: 1886, bind: 0.0.0.0 + system.adapter.onvif.0 : onvif : iobroker - enabled + system.adapter.openweathermap.0 : openweathermap : iobroker - enabled + system.adapter.pushover.0 : pushover : iobroker - enabled + system.adapter.rpi2.0 : rpi2 : iobroker - enabled + system.adapter.sayit.0 : sayit : iobroker - enabled, port: 0 + system.adapter.shelly.0 : shelly : iobroker - enabled, port: 1883 + system.adapter.sonoff.0 : sonoff : iobroker - enabled, port: 1884, bind: 0.0.0.0 + system.adapter.sourceanalytix.0 : sourceanalytix : iobroker - enabled + system.adapter.telegram.0 : telegram : iobroker - enabled, port: 8443, bind: 0.0.0.0 + system.adapter.text2command.0 : text2command : iobroker - enabled + system.adapter.tr-064.0 : tr-064 : iobroker - enabled system.adapter.vis-hqwidgets.0 : vis-hqwidgets : iobroker - disabled system.adapter.vis-icontwo.0 : vis-icontwo : iobroker - disabled + system.adapter.vis-inventwo.0 : vis-inventwo : iobroker - enabled system.adapter.vis-jqui-mfd.0 : vis-jqui-mfd : iobroker - enabled system.adapter.vis-justgage.0 : vis-justgage : iobroker - disabled system.adapter.vis-material-advanced.0 : vis-material-advanced : iobroker - disabled system.adapter.vis-timeandweather.0 : vis-timeandweather : iobroker - disabled system.adapter.vis-weather.0 : vis-weather : iobroker - enabled system.adapter.vis.0 : vis : iobroker - enabled + system.adapter.web.0 : web : iobroker - enabled, port: 8082, bind: 0.0.0.0, run as: admin + system.adapter.worx.0 : worx : iobroker - enabled + system.adapter.zigbee.1 : zigbee : iobroker - enabled, port: /dev/ttyACM0 + instance is alive Enabled adapters with bindings + system.adapter.admin.0 : admin : iobroker - enabled, port: 7777, bind: 0.0.0.0, run as: admin + system.adapter.hm-rpc.0 : hm-rpc : iobroker - enabled, port: 0 + system.adapter.hm-rpc.1 : hm-rpc : iobroker - enabled, port: 0 + system.adapter.hm-rpc.2 : hm-rpc : iobroker - enabled, port: 0 + system.adapter.hm-rpc.3 : hm-rpc : iobroker - enabled, port: 0 + system.adapter.influxdb.0 : influxdb : iobroker - enabled, port: 8086 + system.adapter.mihome-vacuum.0 : mihome-vacuum : iobroker - enabled, port: 54321 + system.adapter.mqtt.0 : mqtt : iobroker - enabled, port: 1882, bind: 192.168.178.23 + system.adapter.mqtt.1 : mqtt : iobroker - enabled, port: 1886, bind: 0.0.0.0 + system.adapter.sayit.0 : sayit : iobroker - enabled, port: 0 + system.adapter.shelly.0 : shelly : iobroker - enabled, port: 1883 + system.adapter.sonoff.0 : sonoff : iobroker - enabled, port: 1884, bind: 0.0.0.0 + system.adapter.telegram.0 : telegram : iobroker - enabled, port: 8443, bind: 0.0.0.0 + system.adapter.web.0 : web : iobroker - enabled, port: 8082, bind: 0.0.0.0, run as: admin + system.adapter.zigbee.1 : zigbee : iobroker - enabled, port: /dev/ttyACM0 ioBroker-Repositories Stable (default): http://download.iobroker.net/sources-dist.json Beta (latest) : http://download.iobroker.net/sources-dist-latest.json Active repo(s): Stable (default) Installed ioBroker-Instances Used repository: Stable (default) Adapter "admin" : 6.13.16 , installed 6.13.16 Adapter "backitup" : 2.11.0 , installed 2.11.0 Adapter "cloud" : 5.0.1 , installed 4.1.0 [Updatable] Adapter "discovery" : 4.4.0 , installed 2.6.1 [Updatable] Adapter "dwd" : 2.8.5 , installed 2.8.3 [Updatable] Adapter "email" : 1.2.2 , installed 1.0.9 [Updatable] Adapter "flot" : 1.12.0 , installed 1.10.6 [Updatable] Adapter "fritzbox" : 0.6.0 , installed 0.2.1 [Updatable] Adapter "fullybrowser" : 3.0.12 , installed 2.1.2 [Updatable] Adapter "heatingcontrol": 2.12.5 , installed 2.3.2 [Updatable] Adapter "hm-rega" : 4.0.0 , installed 4.0.0 Adapter "hm-rpc" : 1.17.0 , installed 1.15.16 [Updatable] Adapter "ical" : 1.14.3 , installed 1.7.4 [Updatable] Adapter "icons-mfd-svg": 1.2.0 , installed 1.0.2 [Updatable] Adapter "influxdb" : 4.0.2 , installed 4.0.2 Adapter "javascript" : 7.8.0 , installed 6.1.4 [Updatable] Controller "js-controller": 5.0.19 , installed 4.0.24 [Updatable] Adapter "lgtv" : 2.2.0 , installed 2.1.1 [Updatable] Adapter "meross" : 1.17.0 , installed 1.17.0 Adapter "mihome" : 1.4.0 , installed 1.4.0 Adapter "mihome-vacuum": 4.2.0 , installed 4.0.0 [Updatable] Adapter "mqtt" : 5.2.0 , installed 2.4.0 [Updatable] Adapter "onvif" : 1.1.3 , installed 0.4.4 [Updatable] Adapter "openweathermap": 1.0.4 , installed 0.3.3 [Updatable] Adapter "paw" : 0.3.2 , installed 0.3.2 Adapter "pushover" : 3.0.6 , installed 3.0.6 Adapter "rpi2" : 1.3.2 , installed 1.3.2 Adapter "sayit" : 3.0.5 , installed 1.12.3 [Updatable] Adapter "shelly" : 6.9.0 , installed 6.3.1 [Updatable] Adapter "simple-api" : 2.7.2 , installed 2.7.2 Adapter "socketio" : 6.7.0 , installed 6.6.1 [Updatable] Adapter "sonoff" : 3.0.3 , installed 2.5.3 [Updatable] Adapter "telegram" : 3.2.1 , installed 1.8.1 [Updatable] Adapter "text2command" : 3.0.3 , installed 2.3.0 [Updatable] Adapter "tr-064" : 4.2.18 , installed 4.2.18 Adapter "vis" : 1.5.4 , installed 1.5.4 Adapter "vis-hqwidgets": 1.5.1 , installed 1.3.0 [Updatable] Adapter "vis-icontwo" : 1.5.0 , installed 0.93.0 [Updatable] Adapter "vis-inventwo" : 3.3.4 , installed 3.3.3 [Updatable] Adapter "vis-jqui-mfd" : 1.1.1 , installed 1.0.12 [Updatable] Adapter "vis-justgage" : 2.1.7 , installed 1.0.2 [Updatable] Adapter "vis-material-advanced": 1.7.4, installed 1.7.2 [Updatable] Adapter "vis-timeandweather": 1.2.2, installed 1.2.2 Adapter "vis-weather" : 2.5.9 , installed 2.5.6 [Updatable] Adapter "web" : 6.2.5 , installed 6.2.5 Adapter "whatsapp-cmb" : 0.2.3 , installed 0.2.3 Adapter "worx" : 2.3.4 , installed 2.3.4 Adapter "ws" : 2.6.1 , installed 2.5.11 [Updatable] Adapter "yr" : 5.3.0 , installed 5.3.0 Adapter "zigbee" : 1.10.3 , installed 1.10.3 Objects and States Please stand by - This may take a while Objects: 11713 States: 10121 *** OS-Repositories and Updates *** W: An error occurred during the signature verification. The repository is not updated and the previous index files will be used. GPG error: https://repos.influxdata.com/debian buster InRelease: The following signatures couldn't be verified because the public key is not available: NO_PUBKEY D8FF8E1F7DF8B07E W: Failed to fetch https://repos.influxdata.com/debian/dists/buster/InRelease The following signatures couldn't be verified because the public key is not available: NO_PUBKEY D8FF8E1F7DF8B07E W: Some index files failed to download. They have been ignored, or old ones used instead. Hit:1 http://raspbian.raspberrypi.org/raspbian buster InRelease Get:2 https://repos.influxdata.com/debian buster InRelease [12.9 kB] Hit:3 http://archive.raspberrypi.org/debian buster InRelease Hit:4 https://deb.nodesource.com/node_18.x nodistro InRelease Err:2 https://repos.influxdata.com/debian buster InRelease The following signatures couldn't be verified because the public key is not available: NO_PUBKEY D8FF8E1F7DF8B07E Fetched 12.9 kB in 2s (8498 B/s) Reading package lists... W: An error occurred during the signature verification. The repository is not updated and the previous index files will be used. GPG error: https://repos.influxdata.com/debian buster InRelease: The following signatures couldn't be verified because the public key is not available: NO_PUBKEY D8FF8E1F7DF8B07E W: Failed to fetch https://repos.influxdata.com/debian/dists/buster/InRelease The following signatures couldn't be verified because the public key is not available: NO_PUBKEY D8FF8E1F7DF8B07E W: Some index files failed to download. They have been ignored, or old ones used instead. Pending Updates: 0 *** Listening Ports *** Active Internet connections (only servers) Proto Recv-Q Send-Q Local Address Foreign Address State User Inode PID/Program name tcp 0 0 192.168.178.23:2001 0.0.0.0:* LISTEN 1001 536573 3566/io.hm-rpc.3 tcp 0 0 0.0.0.0:21 0.0.0.0:* LISTEN 117 19738 705/proftpd: (accep tcp 0 0 0.0.0.0:22 0.0.0.0:* LISTEN 0 18287 559/sshd tcp 0 0 127.0.0.1:631 0.0.0.0:* LISTEN 0 41534 3077/cupsd tcp 0 0 0.0.0.0:5656 0.0.0.0:* LISTEN 0 18860 779/motion tcp 0 0 127.0.0.1:8088 0.0.0.0:* LISTEN 999 19649 517/influxd tcp 0 0 192.168.178.23:2010 0.0.0.0:* LISTEN 1001 539134 3448/io.hm-rpc.1 tcp 0 0 192.168.178.23:1882 0.0.0.0:* LISTEN 1001 539067 3394/io.mqtt.0 tcp 0 0 0.0.0.0:9595 0.0.0.0:* LISTEN 0 18861 779/motion tcp 0 0 0.0.0.0:1884 0.0.0.0:* LISTEN 1001 539216 3521/io.sonoff.0 tcp 0 0 192.168.178.23:8701 0.0.0.0:* LISTEN 1001 539127 3441/io.hm-rpc.0 tcp 0 0 0.0.0.0:8765 0.0.0.0:* LISTEN 0 18979 428/python2 tcp 0 0 0.0.0.0:7070 0.0.0.0:* LISTEN 0 14225 526/anydesk tcp 0 0 127.0.0.1:7999 0.0.0.0:* LISTEN 0 18862 779/motion tcp 0 0 0.0.0.0:38149 0.0.0.0:* LISTEN 0 525839 526/anydesk tcp 0 0 127.0.0.1:9000 0.0.0.0:* LISTEN 1001 536192 3307/iobroker.js-co tcp 0 0 127.0.0.1:9001 0.0.0.0:* LISTEN 1001 536185 3307/iobroker.js-co tcp 0 0 192.168.178.23:9292 0.0.0.0:* LISTEN 1001 541006 3463/io.hm-rpc.2 tcp6 0 0 :::8082 :::* LISTEN 1001 541910 3710/io.web.0 tcp6 0 0 :::8086 :::* LISTEN 999 22642 517/influxd tcp6 0 0 :::22 :::* LISTEN 0 18289 559/sshd tcp6 0 0 ::1:631 :::* LISTEN 0 41533 3077/cupsd tcp6 0 0 :::3000 :::* LISTEN 110 20755 513/grafana-server tcp6 0 0 :::7777 :::* LISTEN 1001 538566 3325/io.admin.0 udp 0 0 0.0.0.0:5683 0.0.0.0:* 1001 540354 3502/io.shelly.0 udp 0 0 0.0.0.0:68 0.0.0.0:* 0 19750 445/dhcpcd udp 0 0 0.0.0.0:631 0.0.0.0:* 0 41552 3079/cups-browsed udp 0 0 0.0.0.0:53421 0.0.0.0:* 1001 541081 3536/io.mihome-vacu udp 0 0 192.168.178.23:5353 0.0.0.0:* 1001 539137 3420/io.tr-064.0 udp 0 0 0.0.0.0:5353 0.0.0.0:* 108 17531 374/avahi-daemon: r udp 0 0 0.0.0.0:47875 0.0.0.0:* 108 17533 374/avahi-daemon: r udp 0 0 0.0.0.0:50001 0.0.0.0:* 0 22556 526/anydesk udp6 0 0 :::5353 :::* 108 17532 374/avahi-daemon: r udp6 0 0 :::33120 :::* 108 17534 374/avahi-daemon: r *** Log File - Last 25 Lines *** 2024-05-06 11:24:16.473 - warn: javascript.0 (3382) at processImmediate (node:internal/timers:476:21) 2024-05-06 11:24:16.473 - warn: javascript.0 (3382) State "javascript.0.Stromverbrauch.Stromkosten_vorheriger_Tag" not found 2024-05-06 11:24:16.475 - warn: javascript.0 (3382) at setState (/opt/iobroker/node_modules/iobroker.javascript/lib/sandbox.js:1719:20) 2024-05-06 11:24:16.475 - warn: javascript.0 (3382) at Object.<anonymous> (script.js.Verbräuche.Stromverbrauch_gestern:5:3) 2024-05-06 11:24:16.477 - warn: javascript.0 (3382) at Object.callback (/opt/iobroker/node_modules/iobroker.javascript/lib/sandbox.js:1244:38) 2024-05-06 11:24:16.477 - warn: javascript.0 (3382) at Object.stateChange (/opt/iobroker/node_modules/iobroker.javascript/main.js:593:29) 2024-05-06 11:24:16.478 - warn: javascript.0 (3382) at Immediate._onImmediate (/opt/iobroker/node_modules/@iobroker/js-controller-adapter/src/lib/adapter/adapter.js:5916:56) 2024-05-06 11:24:16.478 - warn: javascript.0 (3382) at processImmediate (node:internal/timers:476:21) 2024-05-06 11:24:21.813 - info: meross.0 (3483) Can not get Data for Device 1909127883156625186348e1e9034905: Error: Timeout 2024-05-06 11:24:21.814 - warn: meross.0 (3483) Can not get Data for Device 1909127883156625186348e1e9034905: undefined 2024-05-06 11:24:21.835 - info: meross.0 (3483) Can not get Data for Device 1801301547342725131134298f115e90: Error: Timeout 2024-05-06 11:24:21.836 - warn: meross.0 (3483) Can not get Data for Device 1801301547342725131134298f115e90: undefined 2024-05-06 11:24:21.864 - info: meross.0 (3483) Can not get Data for Device 1801306356734125131134298f115f59: Error: Timeout 2024-05-06 11:24:21.865 - warn: meross.0 (3483) Can not get Data for Device 1801306356734125131134298f115f59: undefined 2024-05-06 11:24:21.899 - info: meross.0 (3483) Can not get Data for Device 1801300540186725131134298f115ef4: Error: Timeout 2024-05-06 11:24:21.900 - warn: meross.0 (3483) Can not get Data for Device 1801300540186725131134298f115ef4: undefined 2024-05-06 11:24:40.484 - debug: onvif.0 (3778) startCameras 2024-05-06 11:24:40.521 - debug: onvif.0 (3778) getDevices: [{"type":"device","common":{"name":"192_168_178_47_8899"},"native":{"id":"192_168_178_47_8899","name":"192.168.178.47:8899","ip":"192.168.178.47","port":"8899","user":"C5Xz73SD","password":"XEDRuAwrFddzE9XP","cam_date":"2021-05-18T14:58:39.000Z","info":{"manufacturer":"WVC","model":"W5S","firmwareVersion":"07.26200.05.04","serialNumber":"WVCA98KGIRPCRUMC","hardwareId":"FFFFFFE0-09-FFFFFFBF-6F-33-15"},"events":true,"subscribeEvents":true,"live_stream_tcp":{"uri":"rtsp://192.168.178.47:554/live/ch0?token=12fb11e6e41ab914a76c533db4359c24","invalidAfterConnect":false,"invalidAfterReboot":false,"timeout":"PT0H50M0S"},"live_stream_udp":{"uri":"rtsp://192.168.178.47:554/live/ch0?token=12fb11e6e41ab914a76c533db4359c24","invalidAfterConnect":false,"invalidAfterReboot":false,"timeout":"PT0H50M0S"},"live_stream_multicast":{"uri":"rtsp://192.168.178.47:554/live/ch0?token=12fb11e6e41ab914a76c533db4359c24","invalidAfterConnect":false,"invalidAfterReboot":false,"timeout":"PT0H50M0S"}},"from":"system.adapter.onvif.0","user":"system.user.admin","ts":1676755611510,"_id":"onvif.0.192_168_178_47_8899","acl":{"object":1636,"owner":"system.user.admin","ownerGroup":"system.group.administrator"}}] 2024-05-06 11:24:40.522 - debug: onvif.0 (3778) setCameras: [{"type":"device","common":{"name":"192_168_178_47_8899"},"native":{"id":"192_168_178_47_8899","name":"192.168.178.47:8899","ip":"192.168.178.47","port":"8899","user":"C5Xz73SD","password":"XEDRuAwrFddzE9XP","cam_date":"2021-05-18T14:58:39.000Z","info":{"manufacturer":"WVC","model":"W5S","firmwareVersion":"07.26200.05.04","serialNumber":"WVCA98KGIRPCRUMC","hardwareId":"FFFFFFE0-09-FFFFFFBF-6F-33-15"},"events":true,"subscribeEvents":true,"live_stream_tcp":{"uri":"rtsp://192.168.178.47:554/live/ch0?token=12fb11e6e41ab914a76c533db4359c24","invalidAfterConnect":false,"invalidAfterReboot":false,"timeout":"PT0H50M0S"},"live_stream_udp":{"uri":"rtsp://192.168.178.47:554/live/ch0?token=12fb11e6e41ab914a76c533db4359c24","invalidAfterConnect":false,"invalidAfterReboot":false,"timeout":"PT0H50M0S"},"live_stream_multicast":{"uri":"rtsp://192.168.178.47:554/live/ch0?token=12fb11e6e41ab914a76c533db4359c24","invalidAfterConnect":false,"invalidAfterReboot":false,"timeout":"PT0H50M0S"}},"from":"system.adapter.onvif.0","user":"system.user.admin","ts":1676755611510,"_id":"onvif.0.192_168_178_47_8899","acl":{"object":1636,"owner":"system.user.admin","ownerGroup":"system.group.administrator"}}] 2024-05-06 11:24:40.523 - debug: onvif.0 (3778) classCam: item = {"type":"device","common":{"name":"192_168_178_47_8899"},"native":{"id":"192_168_178_47_8899","name":"192.168.178.47:8899","ip":"192.168.178.47","port":"8899","user":"C5Xz73SD","password":"XEDRuAwrFddzE9XP","cam_date":"2021-05-18T14:58:39.000Z","info":{"manufacturer":"WVC","model":"W5S","firmwareVersion":"07.26200.05.04","serialNumber":"WVCA98KGIRPCRUMC","hardwareId":"FFFFFFE0-09-FFFFFFBF-6F-33-15"},"events":true,"subscribeEvents":true,"live_stream_tcp":{"uri":"rtsp://192.168.178.47:554/live/ch0?token=12fb11e6e41ab914a76c533db4359c24","invalidAfterConnect":false,"invalidAfterReboot":false,"timeout":"PT0H50M0S"},"live_stream_udp":{"uri":"rtsp://192.168.178.47:554/live/ch0?token=12fb11e6e41ab914a76c533db4359c24","invalidAfterConnect":false,"invalidAfterReboot":false,"timeout":"PT0H50M0S"},"live_stream_multicast":{"uri":"rtsp://192.168.178.47:554/live/ch0?token=12fb11e6e41ab914a76c533db4359c24","invalidAfterConnect":false,"invalidAfterReboot":false,"timeout":"PT0H50M0S"}},"from":"system.adapter.onvif.0","user":"system.user.admin","ts":1676755611510,"_id":"onvif.0.192_168_178_47_8899","acl":{"object":1636,"owner":"system.user.admin","ownerGroup":"system.group.administrator"}} 2024-05-06 11:24:43.681 - error: onvif.0 (3778) classCam. Camera/NVT: "192.168.178.47:8899" Error: connect EHOSTUNREACH 192.168.178.47:8899 2024-05-06 11:24:43.682 - debug: onvif.0 (3778) startCameras. cameras: {} 2024-05-06 11:24:43.682 - warn: onvif.0 (3778) startCameras: Cameras/NVT unavailables 2024-05-06 11:24:52.570 - warn: mqtt.0 (3394) Client [shelly1-E8DB84D496EE] has invalid password(h65cgi) or username(iobroker) 2024-05-06 11:25:08.865 - warn: telegram.0 (3790) 1 of 1 recipients are unknown!Hier läuft noch der js-controller: 4.0.24. Im neuen ist der 5.0.19.
Wie update ich den ? -
@bill-s-preston sagte in Iobroker startet nicht mehr nach Restore:
Kann es sein, dass sich das Backup vom alten System mit dem neuen beißt?
Das kann schon sein. Das Alt-System verdient sich diesen Namen ja ganz besonders...
Bring das zuerst mal auf Stand und dann ziehst du mit einem aktuellen Backup um.
-
Wieso aktualisiert sich der js-controller mit
obroker stop iobroker update iobroker upgrade self iobroker startnicht?
-
Ohne Meldungen kann dir das keiner sagen.
-
@bill-s-preston sagte in Iobroker startet nicht mehr nach Restore:
MotionEye lläuft aber auf Port 8765
korrekt, die Benutzeroberfläche, die cams selbst aber dann 8081, 8082, 8083 usw
daher auch auf deinem Alt System@bill-s-preston sagte in Iobroker startet nicht mehr nach Restore:
admin : iobroker - enabled, port: 7777
-
cd /opt/iobroker sudo iobroker set admin.0 --port 7777hat geholfen. Iobroker kann wieder erreicht werden.
Nun fehlt noch MotionEye .
Hier bekomme ich folgende meldungherke@raspberrypi:~ $ sudo systemctl status motioneye × motioneye.service - motionEye Server Loaded: loaded (/etc/systemd/system/motioneye.service; enabled; preset: en> Active: failed (Result: exit-code) since Tue 2024-05-07 07:55:23 CEST; 18s> Duration: 1.494s Process: 1403 ExecStart=/usr/local/bin/meyectl startserver -c /etc/motioney> Main PID: 1403 (code=exited, status=255/EXCEPTION) CPU: 1.493s May 07 07:55:22 raspberrypi systemd[1]: Started motioneye.service - motionEye S> May 07 07:55:23 raspberrypi meyectl[1403]: configure_logging cmd motioneye: Fal> May 07 07:55:23 raspberrypi meyectl[1403]: configure logging to file: None May 07 07:55:23 raspberrypi meyectl[1403]: INFO: hello! this is motionEye s> May 07 07:55:23 raspberrypi meyectl[1403]: CRITICAL: pid directory "/var/run" d> May 07 07:55:23 raspberrypi systemd[1]: motioneye.service: Main process exited,> May 07 07:55:23 raspberrypi systemd[1]: motioneye.service: Failed with result '> May 07 07:55:23 raspberrypi systemd[1]: motioneye.service: Consumed 1.493s CPU > lines 1-16/16 (END) × motioneye.service - motionEye Server Loaded: loaded (/etc/systemd/system/motioneye.service; enabled; preset: enabled) Active: failed (Result: exit-code) since Tue 2024-05-07 07:55:23 CEST; 18s ago Duration: 1.494s Process: 1403 ExecStart=/usr/local/bin/meyectl startserver -c /etc/motioneye/moti> Main PID: 1403 (code=exited, status=255/EXCEPTION) CPU: 1.493s -
Bitte NIE, NIE, NIE das iobroker-Kommando per sudo anpacken.
iob stop iob fix iob start -
Und mach das Fenster von deinem Terminal groß. In der Ausgabe fehlen die Zeilenenden.
-
@thomas-braun said in Iobroker startet nicht mehr nach Restore:
Bitte NIE, NIE, NIE das iobroker-Kommando per sudo anpacken.
iob stop iob fix iob startAlles klar. Was kann passieren wenn sudo benutzt wird?
-
@bill-s-preston sagte in Iobroker startet nicht mehr nach Restore:
Was kann passieren wenn sudo benutzt wird?
Alles, weil der root halt alles darf.
Du verbiegst dir damit aber die vorgesehenen Rechte für die anderen user. -
Danke für die Info und für die Gedult!
Ich werde Shinobi installieren auf dem neuen System. Motioneye wird nicht mehr weiterentwickelt . -
-
@bill-s-preston sagte in Iobroker startet nicht mehr nach Restore:
Motioneye wird nicht mehr weiterentwickelt .
Doch es wird an einer neuen Version gearbeitet
-
MotionEye deinstalieren funktionier nicht
herke@raspberrypi:~ $ pip uninstall motioneye Found existing installation: motioneye 0.43.1b1 Uninstalling motioneye-0.43.1b1: Would remove: /usr/local/bin/meyectl /usr/local/bin/motioneye_init /usr/local/lib/python3.11/dist-packages/motioneye-0.43.1b1.dist-info/* /usr/local/lib/python3.11/dist-packages/motioneye/* Proceed (Y/n)? y ERROR: Exception: Traceback (most recent call last): File "/usr/lib/python3.11/shutil.py", line 825, in move os.rename(src, real_dst) PermissionError: [Errno 13] Permission denied: '/usr/local/bin/meyectl' -> '/tmp/pip-uninstall-eit5jf_4/meyectl' During handling of the above exception, another exception occurred: Traceback (most recent call last): File "/usr/local/lib/python3.11/dist-packages/pip/_internal/cli/base_command.py", line 180, in exc_logging_wrapper status = run_func(*args) ^^^^^^^^^^^^^^^ File "/usr/local/lib/python3.11/dist-packages/pip/_internal/commands/uninstall.py", line 105, in run uninstall_pathset = req.uninstall( ^^^^^^^^^^^^^^ File "/usr/local/lib/python3.11/dist-packages/pip/_internal/req/req_install.py", line 727, in uninstall uninstalled_pathset.remove(auto_confirm, verbose) File "/usr/local/lib/python3.11/dist-packages/pip/_internal/req/req_uninstall.py", line 380, in remove moved.stash(path) File "/usr/local/lib/python3.11/dist-packages/pip/_internal/req/req_uninstall.py", line 271, in stash renames(path, new_path) File "/usr/local/lib/python3.11/dist-packages/pip/_internal/utils/misc.py", line 358, in renames shutil.move(old, new) File "/usr/lib/python3.11/shutil.py", line 846, in move os.unlink(src) PermissionError: [Errno 13] Permission denied: '/usr/local/bin/meyectl'und
Shinobi wird nach der Installation auch nicht erreicht über 192.168.178.68:8080
herke@raspberrypi:~ $ bash <(curl -s https://gitlab.com/Shinobi-Systems/Shinobi- Installer/raw/master/shinobi-install.sh) Opening Install Location : "/home" *--------------------**---------------------* *Shinobi requires being run as root. *Do you want to continue without being root? (Y)es or (n)o? Default : Yes y Install the Development branch? (y)es or (N)o? Default : No n Getting the Master Branch Cloning into 'Shinobi'... remote: Enumerating objects: 23189, done. remote: Counting objects: 100% (148/148), done. remote: Compressing objects: 100% (113/113), done. remote: Total 23189 (delta 61), reused 78 (delta 35), pack-reused 23041 (from 1) Receiving objects: 100% (23189/23189), 16.76 MiB | 11.07 MiB/s, done. Resolving deltas: 100% (15552/15552), done. fatal: detected dubious ownership in repository at '/home/Shinobi' To add an exception for this directory, call: git config --global --add safe.directory /home/Shinobi ------------------------------------- ---------- Shinobi Systems ---------- Repository : https://gitlab.com/Shinobi-Systems/Shinobi Product : Shinobi Professional (Pro) Branch : master Version : Date : Tue 7 May 10:20:37 CEST 2024 ------------------------------------- ------------------------------------- *-----------------------------------* Shinobi Installer ======== Select your OS If your OS is not on the list please refer to the docs. ======== 1. Ubuntu - Fast and Touchless 2. Ubuntu - Advanced 3. Alma Linux 9.2 / Rocky 9 / CentOS 8 - Fast and Touchless (Red Hat) 4. CentOS 5. MacOS 6. FreeBSD 7. OpenSUSE ======== 1 ========================================================= ==!! Shinobi : The Open Source CCTV and NVR Solution !!== ========================================================= To answer yes type the letter (y) in lowercase and press ENTER. Default is no (N). Skip any components you already have or don't need. ============= ============= Detecting Ubuntu Version ============= ============= Ubuntu Version: 12 ============= Shinobi - Do you want to temporarily disable IPv6? Sometimes IPv6 causes Ubuntu package updates to fail. Only do this if your machi ne doesn't rely on IPv6. (y)es or (N)o y net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.default.disable_ipv6 = 1 net.ipv6.conf.lo.disable_ipv6 = 1 Reading package lists... Done Building dependency tree... Done Reading state information... Done gcc is already the newest version (4:12.2.0-3). g++ is already the newest version (4:12.2.0-3). g++ set to manually installed. cmake is already the newest version (3.25.1-1). 0 upgraded, 0 newly installed, 0 to remove and 0 not upgraded. update-alternatives: error: alternative path /usr/bin/gcc-8 doesn't exist ============= Default Superuser : admin@shinobi.video Default Password : admin * You can edit these settings in "super.json" located in the Shinobi directory. ============= Shinobi - Installing Node.js Hit:1 http://deb.debian.org/debian bookworm InRelease Get:2 http://deb.debian.org/debian-security bookworm-security InRelease [48.0 kB ] Get:3 http://deb.debian.org/debian bookworm-updates InRelease [55.4 kB] Get:4 http://archive.raspberrypi.com/debian bookworm InRelease [23.6 kB] Get:5 https://repos.influxdata.com/debian stable InRelease [6,907 B] Get:6 https://apt.grafana.com stable InRelease [7,660 B] Hit:7 https://deb.nodesource.com/node_18.x nodistro InRelease Get:8 http://deb.debian.org/debian-security bookworm-security/main arm64 Package s [153 kB] Get:9 http://deb.debian.org/debian-security bookworm-security/main armhf Package s [150 kB] Get:10 http://deb.debian.org/debian-security bookworm-security/main Translation- en [95.1 kB] Get:11 http://archive.raspberrypi.com/debian bookworm/main arm64 Packages [387 k B] Get:12 https://apt.grafana.com stable/main arm64 Packages [194 kB] Get:13 http://archive.raspberrypi.com/debian bookworm/main armhf Packages [397 k B] Get:14 https://apt.grafana.com stable/main armhf Packages [171 kB] Get:15 https://repos.influxdata.com/debian stable/main arm64 Packages [10.7 kB] Fetched 1,699 kB in 2s (1,023 kB/s) Reading package lists... Done Reading package lists... Done Building dependency tree... Done Reading state information... Done ca-certificates is already the newest version (20230311). curl is already the newest version (7.88.1-10+deb12u5). gnupg is already the newest version (2.2.40-1.1). 0 upgraded, 0 newly installed, 0 to remove and 0 not upgraded. File '/etc/apt/keyrings/nodesource.gpg' exists. Overwrite? (y/N) n Enter new filename: shinobigeil deb [signed-by=/etc/apt/keyrings/nodesource.gpg] https://deb.nodesource.com/node _18.x nodistro main Hit:1 http://deb.debian.org/debian bookworm InRelease Hit:2 http://deb.debian.org/debian-security bookworm-security InRelease Hit:3 http://deb.debian.org/debian bookworm-updates InRelease Hit:4 http://archive.raspberrypi.com/debian bookworm InRelease Hit:5 https://repos.influxdata.com/debian stable InRelease Hit:6 https://apt.grafana.com stable InRelease Hit:7 https://deb.nodesource.com/node_18.x nodistro InRelease Reading package lists... Done Reading package lists... Done Building dependency tree... Done Reading state information... Done nodejs is already the newest version (18.20.2-1nodesource1). 0 upgraded, 0 newly installed, 0 to remove and 0 not upgraded. Reading package lists... Done Building dependency tree... Done Reading state information... Done make is already the newest version (4.3-4.1). make set to manually installed. zip is already the newest version (3.0-13). 0 upgraded, 0 newly installed, 0 to remove and 0 not upgraded. FFmpeg Found... Version : ffmpeg version 5.1.4-0+rpt3+deb12u1 Copyright (c) 2000-2023 the FFmpeg developers built with gcc 12 (Debian 12.2.0-14) configuration: --prefix=/usr --extra-version=0+rpt3+deb12u1 --toolchain=hardened --incdir=/usr/include/aarch64-linux-gnu --enable-gpl --disable-stripping --disa ble-mmal --enable-gnutls --enable-ladspa --enable-libaom --enable-libass --enabl e-libbluray --enable-libbs2b --enable-libcaca --enable-libcdio --enable-libcodec 2 --enable-libdav1d --enable-libflite --enable-libfontconfig --enable-libfreetyp e --enable-libfribidi --enable-libglslang --enable-libgme --enable-libgsm --enab le-libjack --enable-libmp3lame --enable-libmysofa --enable-libopenjpeg --enable- libopenmpt --enable-libopus --enable-libpulse --enable-librabbitmq --enable-libr ist --enable-librubberband --enable-libshine --enable-libsnappy --enable-libsoxr --enable-libspeex --enable-libsrt --enable-libssh --enable-libsvtav1 --enable-l ibtheora --enable-libtwolame --enable-libvidstab --enable-libvorbis --enable-lib vpx --enable-libwebp --enable-libx265 --enable-libxml2 --enable-libxvid --enable -libzimg --enable-libzmq --enable-libzvbi --enable-lv2 --enable-omx --enable-ope nal --enable-opencl --enable-opengl --enable-sand --enable-sdl2 --disable-sndio --enable-libjxl --enable-neon --enable-v4l2-request --enable-libudev --enable-ep oxy --libdir=/usr/lib/aarch64-linux-gnu --arch=arm64 --enable-pocketsphinx --ena ble-librsvg --enable-libdc1394 --enable-libdrm --enable-vout-drm --enable-libiec 61883 --enable-chromaprint --enable-frei0r --enable-libx264 --enable-libplacebo --enable-librav1e --enable-shared libavutil 57. 28.100 / 57. 28.100 libavcodec 59. 37.100 / 59. 37.100 libavformat 59. 27.100 / 59. 27.100 libavdevice 59. 7.100 / 59. 7.100 libavfilter 8. 44.100 / 8. 44.100 libswscale 6. 7.100 / 6. 7.100 libswresample 4. 7.100 / 4. 7.100 libpostproc 56. 6.100 / 56. 6.100 ============= Shinobi - Installing MariaDB MariaDB will be installed with no password. Reading package lists... Done Building dependency tree... Done Reading state information... Done The following additional packages will be installed: galera-4 gawk libcgi-fast-perl libcgi-pm-perl libclone-perl libconfig-inifiles-perl libdaxctl1 libdbd-mariadb-perl libdbi-perl libencode-locale-perl libfcgi-bin libfcgi-perl libfcgi0ldbl libgpm2 libhtml-parser-perl libhtml-tagset-perl libhtml-template-perl libhttp-date-perl libhttp-message-perl libio-html-perl liblwp-mediatypes-perl libncurses6 libndctl6 libpmem1 libregexp-ipv6-perl libsigsegv2 libterm-readkey-perl libtimedate-perl liburi-perl liburing2 lsof mariadb-client mariadb-client-core mariadb-plugin-provider-bzip2 mariadb-plugin-provider-lz4 mariadb-plugin-provider-lzma mariadb-plugin-provider-lzo mariadb-plugin-provider-snappy mariadb-server-core pv socat Suggested packages: gawk-doc libmldbm-perl libnet-daemon-perl libsql-statement-perl gpm libdata-dump-perl libipc-sharedcache-perl libbusiness-isbn-perl libwww-perl mailx mariadb-test netcat-openbsd doc-base The following NEW packages will be installed: galera-4 gawk libcgi-fast-perl libcgi-pm-perl libclone-perl libconfig-inifiles-perl libdaxctl1 libdbd-mariadb-perl libdbi-perl libencode-locale-perl libfcgi-bin libfcgi-perl libfcgi0ldbl libgpm2 libhtml-parser-perl libhtml-tagset-perl libhtml-template-perl libhttp-date-perl libhttp-message-perl libio-html-perl liblwp-mediatypes-perl libncurses6 libndctl6 libpmem1 libregexp-ipv6-perl libsigsegv2 libterm-readkey-perl libtimedate-perl liburi-perl liburing2 lsof mariadb-client mariadb-client-core mariadb-plugin-provider-bzip2 mariadb-plugin-provider-lz4 mariadb-plugin-provider-lzma mariadb-plugin-provider-lzo mariadb-plugin-provider-snappy mariadb-server mariadb-server-core pv socat 0 upgraded, 42 newly installed, 0 to remove and 0 not upgraded. Need to get 18.1 MB of archives. After this operation, 196 MB of additional disk space will be used. Get:1 http://deb.debian.org/debian bookworm/main arm64 libsigsegv2 arm64 2.14-1 [37.0 kB] Get:2 http://deb.debian.org/debian bookworm/main arm64 gawk arm64 1:5.2.1-2 [640 kB] Get:3 http://deb.debian.org/debian bookworm/main arm64 galera-4 arm64 26.4.13-1 [702 kB] Get:4 http://deb.debian.org/debian bookworm/main arm64 libdbi-perl arm64 1.643-4 [767 kB] Get:5 http://deb.debian.org/debian bookworm/main arm64 lsof arm64 4.95.0-1 [313 kB] Get:6 http://deb.debian.org/debian bookworm/main arm64 libconfig-inifiles-perl a ll 3.000003-2 [45.9 kB] Get:7 http://deb.debian.org/debian bookworm/main arm64 libncurses6 arm64 6.4-4 [ 93.9 kB] Get:8 http://deb.debian.org/debian bookworm/main arm64 mariadb-client-core arm64 1:10.11.6-0+deb12u1 [846 kB] Get:9 http://deb.debian.org/debian bookworm/main arm64 mariadb-client arm64 1:10 .11.6-0+deb12u1 [2,865 kB] Get:10 http://deb.debian.org/debian bookworm/main arm64 libdaxctl1 arm64 76.1-1 [19.8 kB] Get:11 http://deb.debian.org/debian bookworm/main arm64 libndctl6 arm64 76.1-1 [ 57.4 kB] Get:12 http://deb.debian.org/debian bookworm/main arm64 libpmem1 arm64 1.12.1-2 [45.7 kB] Get:13 http://deb.debian.org/debian bookworm/main arm64 liburing2 arm64 2.3-3 [1 2.6 kB] Get:14 http://deb.debian.org/debian bookworm/main arm64 mariadb-server-core arm6 4 1:10.11.6-0+deb12u1 [6,734 kB] Get:15 http://deb.debian.org/debian bookworm/main arm64 socat arm64 1.7.4.4-2 [3 66 kB] Get:16 http://deb.debian.org/debian bookworm/main arm64 mariadb-server arm64 1:1 0.11.6-0+deb12u1 [3,447 kB] Get:17 http://deb.debian.org/debian bookworm/main arm64 libhtml-tagset-perl all 3.20-6 [11.7 kB] Get:18 http://deb.debian.org/debian bookworm/main arm64 libregexp-ipv6-perl all 0.03-3 [5,212 B] Get:19 http://deb.debian.org/debian bookworm/main arm64 liburi-perl all 5.17-1 [ 90.4 kB] Get:20 http://deb.debian.org/debian bookworm/main arm64 libhtml-parser-perl arm6 4 3.81-1 [98.6 kB] Get:21 http://deb.debian.org/debian bookworm/main arm64 libcgi-pm-perl all 4.55- 1 [220 kB] Get:22 http://deb.debian.org/debian bookworm/main arm64 libfcgi0ldbl arm64 2.4.2 -2 [25.3 kB] Get:23 http://deb.debian.org/debian bookworm/main arm64 libfcgi-perl arm64 0.82+ ds-2 [24.4 kB] Get:24 http://deb.debian.org/debian bookworm/main arm64 libcgi-fast-perl all 1:2 .15-1 [12.1 kB] Get:25 http://deb.debian.org/debian bookworm/main arm64 libclone-perl arm64 0.46 -1 [13.5 kB] Get:26 http://deb.debian.org/debian bookworm/main arm64 libdbd-mariadb-perl arm6 4 1.22-1+b1 [89.1 kB] Get:27 http://deb.debian.org/debian bookworm/main arm64 libencode-locale-perl al l 1.05-3 [12.9 kB] Get:28 http://deb.debian.org/debian bookworm/main arm64 libfcgi-bin arm64 2.4.2- 2 [12.5 kB] Get:29 http://deb.debian.org/debian bookworm/main arm64 libgpm2 arm64 1.20.7-10+ b1 [14.4 kB] Get:30 http://deb.debian.org/debian bookworm/main arm64 libhtml-template-perl al l 2.97-2 [66.5 kB] Get:31 http://deb.debian.org/debian bookworm/main arm64 libtimedate-perl all 2.3 300-2 [39.3 kB] Get:32 http://deb.debian.org/debian bookworm/main arm64 libhttp-date-perl all 6. 05-2 [10.5 kB] Get:33 http://deb.debian.org/debian bookworm/main arm64 libio-html-perl all 1.00 4-3 [16.2 kB] Get:34 http://deb.debian.org/debian bookworm/main arm64 liblwp-mediatypes-perl a ll 6.04-2 [20.2 kB] Get:35 http://deb.debian.org/debian bookworm/main arm64 libhttp-message-perl all 6.44-1 [81.7 kB] Get:36 http://deb.debian.org/debian bookworm/main arm64 libterm-readkey-perl arm 64 2.38-2+b1 [24.1 kB] Get:37 http://deb.debian.org/debian bookworm/main arm64 mariadb-plugin-provider- bzip2 arm64 1:10.11.6-0+deb12u1 [24.9 kB] Get:38 http://deb.debian.org/debian bookworm/main arm64 mariadb-plugin-provider- lz4 arm64 1:10.11.6-0+deb12u1 [24.8 kB] Get:39 http://deb.debian.org/debian bookworm/main arm64 mariadb-plugin-provider- lzma arm64 1:10.11.6-0+deb12u1 [24.9 kB] Get:40 http://deb.debian.org/debian bookworm/main arm64 mariadb-plugin-provider- lzo arm64 1:10.11.6-0+deb12u1 [24.8 kB] Get:41 http://deb.debian.org/debian bookworm/main arm64 mariadb-plugin-provider- snappy arm64 1:10.11.6-0+deb12u1 [24.9 kB] Get:42 http://deb.debian.org/debian bookworm/main arm64 pv arm64 1.6.20-1 [58.6 kB] Fetched 18.1 MB in 2s (10.3 MB/s) Extracting templates from packages: 100% Preconfiguring packages ... Selecting previously unselected package libsigsegv2:arm64. (Reading database ... 103045 files and directories currently installed.) Preparing to unpack .../libsigsegv2_2.14-1_arm64.deb ... Unpacking libsigsegv2:arm64 (2.14-1) ... Setting up libsigsegv2:arm64 (2.14-1) ... Selecting previously unselected package gawk. (Reading database ... 103054 files and directories currently installed.) Preparing to unpack .../00-gawk_1%3a5.2.1-2_arm64.deb ... Unpacking gawk (1:5.2.1-2) ... Selecting previously unselected package galera-4. Preparing to unpack .../01-galera-4_26.4.13-1_arm64.deb ... Unpacking galera-4 (26.4.13-1) ... Selecting previously unselected package libdbi-perl:arm64. Preparing to unpack .../02-libdbi-perl_1.643-4_arm64.deb ... Unpacking libdbi-perl:arm64 (1.643-4) ... Selecting previously unselected package lsof. Preparing to unpack .../03-lsof_4.95.0-1_arm64.deb ... Unpacking lsof (4.95.0-1) ... Selecting previously unselected package libconfig-inifiles-perl. Preparing to unpack .../04-libconfig-inifiles-perl_3.000003-2_all.deb ... Unpacking libconfig-inifiles-perl (3.000003-2) ... Selecting previously unselected package libncurses6:arm64. Preparing to unpack .../05-libncurses6_6.4-4_arm64.deb ... Unpacking libncurses6:arm64 (6.4-4) ... Selecting previously unselected package mariadb-client-core. Preparing to unpack .../06-mariadb-client-core_1%3a10.11.6-0+deb12u1_arm64.deb . .. Unpacking mariadb-client-core (1:10.11.6-0+deb12u1) ... Selecting previously unselected package mariadb-client. Preparing to unpack .../07-mariadb-client_1%3a10.11.6-0+deb12u1_arm64.deb ... Unpacking mariadb-client (1:10.11.6-0+deb12u1) ... Selecting previously unselected package libdaxctl1:arm64. Preparing to unpack .../08-libdaxctl1_76.1-1_arm64.deb ... Unpacking libdaxctl1:arm64 (76.1-1) ... Selecting previously unselected package libndctl6:arm64. Preparing to unpack .../09-libndctl6_76.1-1_arm64.deb ... Unpacking libndctl6:arm64 (76.1-1) ... Selecting previously unselected package libpmem1:arm64. Preparing to unpack .../10-libpmem1_1.12.1-2_arm64.deb ... Unpacking libpmem1:arm64 (1.12.1-2) ... Selecting previously unselected package liburing2:arm64. Preparing to unpack .../11-liburing2_2.3-3_arm64.deb ... Unpacking liburing2:arm64 (2.3-3) ... Selecting previously unselected package mariadb-server-core. Preparing to unpack .../12-mariadb-server-core_1%3a10.11.6-0+deb12u1_arm64.deb . .. Unpacking mariadb-server-core (1:10.11.6-0+deb12u1) ... Selecting previously unselected package socat. Preparing to unpack .../13-socat_1.7.4.4-2_arm64.deb ... Unpacking socat (1.7.4.4-2) ... Selecting previously unselected package mariadb-server. Preparing to unpack .../14-mariadb-server_1%3a10.11.6-0+deb12u1_arm64.deb ... Unpacking mariadb-server (1:10.11.6-0+deb12u1) ... Selecting previously unselected package libhtml-tagset-perl. Preparing to unpack .../15-libhtml-tagset-perl_3.20-6_all.deb ... Unpacking libhtml-tagset-perl (3.20-6) ... Selecting previously unselected package libregexp-ipv6-perl. Preparing to unpack .../16-libregexp-ipv6-perl_0.03-3_all.deb ... Unpacking libregexp-ipv6-perl (0.03-3) ... Selecting previously unselected package liburi-perl. Preparing to unpack .../17-liburi-perl_5.17-1_all.deb ... Unpacking liburi-perl (5.17-1) ... Selecting previously unselected package libhtml-parser-perl:arm64. Preparing to unpack .../18-libhtml-parser-perl_3.81-1_arm64.deb ... Unpacking libhtml-parser-perl:arm64 (3.81-1) ... Selecting previously unselected package libcgi-pm-perl. Preparing to unpack .../19-libcgi-pm-perl_4.55-1_all.deb ... Unpacking libcgi-pm-perl (4.55-1) ... Selecting previously unselected package libfcgi0ldbl:arm64. Preparing to unpack .../20-libfcgi0ldbl_2.4.2-2_arm64.deb ... Unpacking libfcgi0ldbl:arm64 (2.4.2-2) ... Selecting previously unselected package libfcgi-perl. Preparing to unpack .../21-libfcgi-perl_0.82+ds-2_arm64.deb ... Unpacking libfcgi-perl (0.82+ds-2) ... Selecting previously unselected package libcgi-fast-perl. Preparing to unpack .../22-libcgi-fast-perl_1%3a2.15-1_all.deb ... Unpacking libcgi-fast-perl (1:2.15-1) ... Selecting previously unselected package libclone-perl:arm64. Preparing to unpack .../23-libclone-perl_0.46-1_arm64.deb ... Unpacking libclone-perl:arm64 (0.46-1) ... Selecting previously unselected package libdbd-mariadb-perl. Preparing to unpack .../24-libdbd-mariadb-perl_1.22-1+b1_arm64.deb ... Unpacking libdbd-mariadb-perl (1.22-1+b1) ... Selecting previously unselected package libencode-locale-perl. Preparing to unpack .../25-libencode-locale-perl_1.05-3_all.deb ... Unpacking libencode-locale-perl (1.05-3) ... Selecting previously unselected package libfcgi-bin. Preparing to unpack .../26-libfcgi-bin_2.4.2-2_arm64.deb ... Unpacking libfcgi-bin (2.4.2-2) ... Selecting previously unselected package libgpm2:arm64. Preparing to unpack .../27-libgpm2_1.20.7-10+b1_arm64.deb ... Unpacking libgpm2:arm64 (1.20.7-10+b1) ... Selecting previously unselected package libhtml-template-perl. Preparing to unpack .../28-libhtml-template-perl_2.97-2_all.deb ... Unpacking libhtml-template-perl (2.97-2) ... Selecting previously unselected package libtimedate-perl. Preparing to unpack .../29-libtimedate-perl_2.3300-2_all.deb ... Unpacking libtimedate-perl (2.3300-2) ... Selecting previously unselected package libhttp-date-perl. Preparing to unpack .../30-libhttp-date-perl_6.05-2_all.deb ... Unpacking libhttp-date-perl (6.05-2) ... Selecting previously unselected package libio-html-perl. Preparing to unpack .../31-libio-html-perl_1.004-3_all.deb ... Unpacking libio-html-perl (1.004-3) ... Selecting previously unselected package liblwp-mediatypes-perl. Preparing to unpack .../32-liblwp-mediatypes-perl_6.04-2_all.deb ... Unpacking liblwp-mediatypes-perl (6.04-2) ... Selecting previously unselected package libhttp-message-perl. Preparing to unpack .../33-libhttp-message-perl_6.44-1_all.deb ... Unpacking libhttp-message-perl (6.44-1) ... Selecting previously unselected package libterm-readkey-perl. Preparing to unpack .../34-libterm-readkey-perl_2.38-2+b1_arm64.deb ... Unpacking libterm-readkey-perl (2.38-2+b1) ... Selecting previously unselected package mariadb-plugin-provider-bzip2. Preparing to unpack .../35-mariadb-plugin-provider-bzip2_1%3a10.11.6-0+deb12u1_a rm64.deb ... Unpacking mariadb-plugin-provider-bzip2 (1:10.11.6-0+deb12u1) ... Selecting previously unselected package mariadb-plugin-provider-lz4. Preparing to unpack .../36-mariadb-plugin-provider-lz4_1%3a10.11.6-0+deb12u1_arm 64.deb ... Unpacking mariadb-plugin-provider-lz4 (1:10.11.6-0+deb12u1) ... Selecting previously unselected package mariadb-plugin-provider-lzma. Preparing to unpack .../37-mariadb-plugin-provider-lzma_1%3a10.11.6-0+deb12u1_ar m64.deb ... Unpacking mariadb-plugin-provider-lzma (1:10.11.6-0+deb12u1) ... Selecting previously unselected package mariadb-plugin-provider-lzo. Preparing to unpack .../38-mariadb-plugin-provider-lzo_1%3a10.11.6-0+deb12u1_arm 64.deb ... Unpacking mariadb-plugin-provider-lzo (1:10.11.6-0+deb12u1) ... Selecting previously unselected package mariadb-plugin-provider-snappy. Preparing to unpack .../39-mariadb-plugin-provider-snappy_1%3a10.11.6-0+deb12u1_ arm64.deb ... Unpacking mariadb-plugin-provider-snappy (1:10.11.6-0+deb12u1) ... Selecting previously unselected package pv. Preparing to unpack .../40-pv_1.6.20-1_arm64.deb ... Unpacking pv (1.6.20-1) ... Setting up libconfig-inifiles-perl (3.000003-2) ... Setting up galera-4 (26.4.13-1) ... Setting up libgpm2:arm64 (1.20.7-10+b1) ... Setting up libfcgi0ldbl:arm64 (2.4.2-2) ... Setting up gawk (1:5.2.1-2) ... Setting up libclone-perl:arm64 (0.46-1) ... Setting up libhtml-tagset-perl (3.20-6) ... Setting up liblwp-mediatypes-perl (6.04-2) ... Setting up libfcgi-bin (2.4.2-2) ... Setting up libencode-locale-perl (1.05-3) ... Setting up socat (1.7.4.4-2) ... Setting up libncurses6:arm64 (6.4-4) ... Setting up libio-html-perl (1.004-3) ... Setting up libdaxctl1:arm64 (76.1-1) ... Setting up lsof (4.95.0-1) ... Setting up libtimedate-perl (2.3300-2) ... Setting up libregexp-ipv6-perl (0.03-3) ... Setting up pv (1.6.20-1) ... Setting up libndctl6:arm64 (76.1-1) ... Setting up libfcgi-perl (0.82+ds-2) ... Setting up libterm-readkey-perl (2.38-2+b1) ... Setting up liburing2:arm64 (2.3-3) ... Setting up libpmem1:arm64 (1.12.1-2) ... Setting up liburi-perl (5.17-1) ... Setting up libdbi-perl:arm64 (1.643-4) ... Setting up libhttp-date-perl (6.05-2) ... Setting up mariadb-client-core (1:10.11.6-0+deb12u1) ... Setting up libdbd-mariadb-perl (1.22-1+b1) ... Setting up libhtml-parser-perl:arm64 (3.81-1) ... Setting up mariadb-server-core (1:10.11.6-0+deb12u1) ... Setting up libhttp-message-perl (6.44-1) ... Setting up mariadb-client (1:10.11.6-0+deb12u1) ... Setting up libcgi-pm-perl (4.55-1) ... Setting up libhtml-template-perl (2.97-2) ... Setting up mariadb-server (1:10.11.6-0+deb12u1) ... Created symlink /etc/systemd/system/multi-user.target.wants/mariadb.service → /l ib/systemd/system/mariadb.service. Setting up mariadb-plugin-provider-bzip2 (1:10.11.6-0+deb12u1) ... Setting up mariadb-plugin-provider-lzma (1:10.11.6-0+deb12u1) ... Setting up mariadb-plugin-provider-lzo (1:10.11.6-0+deb12u1) ... Setting up mariadb-plugin-provider-lz4 (1:10.11.6-0+deb12u1) ... Setting up libcgi-fast-perl (1:2.15-1) ... Setting up mariadb-plugin-provider-snappy (1:10.11.6-0+deb12u1) ... Processing triggers for man-db (2.11.2-2) ... Processing triggers for libc-bin (2.36-9+rpt2+deb12u6) ... Processing triggers for mariadb-server (1:10.11.6-0+deb12u1) ... ============= Shinobi - Installing Database... ============= Shinobi - Install NPM Libraries npm WARN deprecated resolve-url@0.2.1: https://github.com/lydell/resolve-url#dep recated npm WARN deprecated har-validator@5.1.5: this library is no longer supported npm WARN deprecated urix@0.1.0: Please see https://github.com/lydell/urix#deprec ated npm WARN deprecated request-promise@4.2.6: request-promise has been deprecated b ecause it extends the now deprecated request package, see https://github.com/req uest/request/issues/3142 npm WARN deprecated @discordjs/form-data@3.0.1: Package no longer supported. Con tact Support at https://www.npmjs.com/support for more info. npm WARN deprecated @discordjs/collection@0.1.6: no longer supported npm WARN deprecated uuid@3.3.2: Please upgrade to version 7 or higher. Older v ersions may use Math.random() in certain circumstances, which is known to be pro blematic. See https://v8.dev/blog/math-random for details. npm WARN deprecated request@2.88.2: request has been deprecated, see https://git hub.com/request/request/issues/3142 npm WARN deprecated discord.js@12.2.0: no longer supported added 762 packages, and audited 763 packages in 1m 45 packages are looking for funding run `npm fund` for details 18 vulnerabilities (16 moderate, 2 critical) To address issues that do not require attention, run: npm audit fix To address all issues (including breaking changes), run: npm audit fix --force Run `npm audit` for details. npm notice npm notice New minor version of npm available! 10.5.0 -> 10.7.0 npm notice Changelog: https://github.com/npm/cli/releases/tag/v10.7.0 npm notice Run npm install -g npm@10.7.0 to update! npm notice ============= Shinobi - Install PM2 npm WARN deprecated uuid@3.4.0: Please upgrade to version 7 or higher. Older versions may use Math.random() in certain circumstances, which is known to be problematic. See https://v8.dev/blog/math-random for details. added 162 packages in 18s 14 packages are looking for funding run `npm fund` for details Shinobi - Finished dos2unix: converting file INSTALL/shinobi to Unix format... Shinobi - Randomizing cron key addToConfig: [object Object] Changes Complete. Here is what it is now. { "port": 8080, "debugLog": false, "enableFaceManager": false, "videosDir": "__DIR__/videos", "passwordType": "sha256", "detectorMergePamRegionTriggers": true, "wallClockTimestampAsDefault": true, "useBetterP2P": true, "smtpServerOptions": { "allowInsecureAuth": true }, "addStorage": [ { "name": "second", "path": "__DIR__/videos2" } ], "db": { "host": "127.0.0.1", "user": "majesticflame", "password": "", "database": "ccio", "port": 3306 }, "mail": { "service": "gmail", "auth": { "user": "your_email@gmail.com", "pass": "your_password_or_app_specific_password" } }, "cron": { "key": "09e6aa3f65ca6ef81d120889f44dec94e8efc9d92c90615f26a06177af5a" }, "pluginKeys": {} } Shinobi - Starting Shinobi and setting to start on boot ------------- __/\\\\\\\\\\\\\____/\\\\____________/\\\\____/\\\\\\\\\_____ _\/\\\/////////\\\_\/\\\\\\________/\\\\\\__/\\\///////\\\___ _\/\\\_______\/\\\_\/\\\//\\\____/\\\//\\\_\///______\//\\\__ _\/\\\\\\\\\\\\\/__\/\\\\///\\\/\\\/_\/\\\___________/\\\/___ _\/\\\/////////____\/\\\__\///\\\/___\/\\\________/\\\//_____ _\/\\\_____________\/\\\____\///_____\/\\\_____/\\\//________ _\/\\\_____________\/\\\_____________\/\\\___/\\\/___________ _\/\\\_____________\/\\\_____________\/\\\__/\\\\\\\\\\\\\\\_ _\///______________\///______________\///__\///////////////__ Runtime Edition PM2 is a Production Process Manager for Node.js applications with a built-in Load Balancer. Start and Daemonize any application: $ pm2 start app.js Load Balance 4 instances of api.js: $ pm2 start api.js -i 4 Monitor in production: $ pm2 monitor Make pm2 auto-boot at server restart: $ pm2 startup To go further checkout: http://pm2.io/ ------------- [PM2] Spawning PM2 daemon with pm2_home=/root/.pm2 [PM2] PM2 Successfully daemonized [PM2] Starting /home/Shinobi/camera.js in fork_mode (1 instance) [PM2] Done. ┌────┬───────────┬─────────────┬─────────┬─────────┬──────────┬────────┬──────┬───────────┬──────────┬──────────┬──────────┬──────────┐ │ id │ name │ namespace │ version │ mode │ pid │ uptime │ ↺ │ status │ cpu │ mem │ user │ watching │ ├────┼───────────┼─────────────┼─────────┼─────────┼──────────┼────────┼──────┼───────────┼──────────┼──────────┼──────────┼──────────┤ │ 0 │ camera │ default │ 2.0.0 │ fork │ 4133 │ 0s │ 0 │ online │ 0% │ 38.8mb │ root │ disabled │ └────┴───────────┴─────────────┴─────────┴─────────┴──────────┴────────┴──────┴───────────┴──────────┴──────────┴──────────┴──────────┘ [PM2] Init System found: systemd Platform systemd Template [Unit] Description=PM2 process manager Documentation=https://pm2.keymetrics.io/ After=network.target [Service] Type=forking User=root LimitNOFILE=infinity LimitNPROC=infinity LimitCORE=infinity Environment=PATH=/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin:/bin:/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin Environment=PM2_HOME=/root/.pm2 PIDFile=/root/.pm2/pm2.pid Restart=on-failure ExecStart=/usr/lib/node_modules/pm2/bin/pm2 resurrect ExecReload=/usr/lib/node_modules/pm2/bin/pm2 reload all ExecStop=/usr/lib/node_modules/pm2/bin/pm2 kill [Install] WantedBy=multi-user.target Target path /etc/systemd/system/pm2-root.service Command list [ 'systemctl enable pm2-root' ] [PM2] Writing init configuration in /etc/systemd/system/pm2-root.service [PM2] Making script booting at startup... [PM2] [-] Executing: systemctl enable pm2-root... Created symlink /etc/systemd/system/multi-user.target.wants/pm2-root.service → /etc/systemd/system/pm2-root.service. [PM2] [v] Command successfully executed. +---------------------------------------+ [PM2] Freeze a process list on reboot via: $ pm2 save [PM2] Remove init script via: $ pm2 unstartup systemd [PM2] Saving current process list... [PM2] Successfully saved in /root/.pm2/dump.pm2 ┌────┬───────────┬─────────────┬─────────┬─────────┬──────────┬────────┬──────┬───────────┬──────────┬──────────┬──────────┬──────────┐ │ id │ name │ namespace │ version │ mode │ pid │ uptime │ ↺ │ status │ cpu │ mem │ user │ watching │ ├────┼───────────┼─────────────┼─────────┼─────────┼──────────┼────────┼──────┼───────────┼──────────┼──────────┼──────────┼──────────┤ │ 0 │ camera │ default │ 2.0.0 │ fork │ 4133 │ 4s │ 0 │ online │ 0% │ 111.5mb │ root │ disabled │ └────┴───────────┴─────────────┴─────────┴─────────┴──────────┴────────┴──────┴───────────┴──────────┴──────────┴──────────┴──────────┘ ===================================== ||===== Install Completed =====|| ===================================== || Login with the Superuser and create a new user!! ||=================================== || Open http://192.168.178.68:8080/super in your web browser. ||=================================== || Default Superuser : admin@shinobi.video || Default Password : adminSystem nochmal neu aufsetzen? Da ist doch was faul
-
@bill-s-preston dann mach mal ein
sudo pip....
