Einrichtung Multihost klappt nicht - Meldung Slave

Thomas Braun

@sms sagte in Einrichtung Multihost klappt nicht - Meldung Slave:

Extra installiert habe ich influxdb nicht nach Neuinstallation des Betriebssystems!

Da das kein default package ist wirst du das dann erst noch installieren müssen...

Thomas Braun

Repository drin?

sudo apt update
apt policy influx*

sagt?

SMS

@thomas-braun

pi@Homee:~ $ sudo apt update
Hit:1 http://deb.debian.org/debian bookworm InRelease
Hit:2 http://deb.debian.org/debian-security bookworm-security InRelease
Hit:3 http://deb.debian.org/debian bookworm-updates InRelease
Hit:4 https://repos.influxdata.com/debian stable InRelease
Hit:5 https://deb.nodesource.com/node_20.x nodistro InRelease
Hit:6 http://archive.raspberrypi.com/debian bookworm InRelease
Reading package lists... Done
Building dependency tree... Done
Reading state information... Done
All packages are up to date.
pi@Homee:~ $ apt policy influx*
influxdb2-cli:
  Installed: (none)
  Candidate: 2.7.5-1
  Version table:
     2.7.5-1 500
        500 https://repos.influxdata.com/debian stable/main arm64 Packages
     2.7.3-1 500
        500 https://repos.influxdata.com/debian stable/main arm64 Packages
     2.7.1-2 500
        500 https://repos.influxdata.com/debian stable/main arm64 Packages
     2.6.1 500
        500 https://repos.influxdata.com/debian stable/main arm64 Packages
     2.6.0 500
        500 https://repos.influxdata.com/debian stable/main arm64 Packages
     2.5.0 500
        500 https://repos.influxdata.com/debian stable/main arm64 Packages
     2.4.0 500
        500 https://repos.influxdata.com/debian stable/main arm64 Packages
     2.3.0 500
        500 https://repos.influxdata.com/debian stable/main arm64 Packages
influxdb-client:
  Installed: (none)
  Candidate: 1.6.7~rc0-1+b13
  Version table:
     1.6.7~rc0-1+b13 500
        500 http://deb.debian.org/debian bookworm/main arm64 Packages
influxdb-dev:
  Installed: (none)
  Candidate: (none)
  Version table:
influxdb2-client:
  Installed: (none)
  Candidate: 2.7.1-1
  Version table:
     2.7.1-1 500
        500 https://repos.influxdata.com/debian stable/main arm64 Packages
influxdb:
  Installed: 1.8.10-1
  Candidate: 1.8.10-1
  Version table:
 *** 1.8.10-1 500
        500 https://repos.influxdata.com/debian stable/main arm64 Packages
        100 /var/lib/dpkg/status
     1.6.7~rc0-1+b13 500
        500 http://deb.debian.org/debian bookworm/main arm64 Packages
influxctl:
  Installed: (none)
  Candidate: 2.9.0
  Version table:
     2.9.0 500
        500 https://repos.influxdata.com/debian stable/main arm64 Packages
     2.8.0 500
        500 https://repos.influxdata.com/debian stable/main arm64 Packages
     2.7.1 500
        500 https://repos.influxdata.com/debian stable/main arm64 Packages
     2.7.0 500
        500 https://repos.influxdata.com/debian stable/main arm64 Packages
     2.6.0 500
        500 https://repos.influxdata.com/debian stable/main arm64 Packages
     2.5.0 500
        500 https://repos.influxdata.com/debian stable/main arm64 Packages
     2.4.4 500
        500 https://repos.influxdata.com/debian stable/main arm64 Packages
     2.4.3 500
        500 https://repos.influxdata.com/debian stable/main arm64 Packages
     2.4.2 500
        500 https://repos.influxdata.com/debian stable/main arm64 Packages
     2.4.1 500
        500 https://repos.influxdata.com/debian stable/main arm64 Packages
     2.4.0 500
        500 https://repos.influxdata.com/debian stable/main arm64 Packages
     2.3.1 500
        500 https://repos.influxdata.com/debian stable/main arm64 Packages
     2.3.0 500
        500 https://repos.influxdata.com/debian stable/main arm64 Packages
     2.2.0 500
        500 https://repos.influxdata.com/debian stable/main arm64 Packages
     2.1.0 500
        500 https://repos.influxdata.com/debian stable/main arm64 Packages
     2.0.4 500
        500 https://repos.influxdata.com/debian stable/main arm64 Packages
     2.0.3 500
        500 https://repos.influxdata.com/debian stable/main arm64 Packages
     2.0.2 500
        500 https://repos.influxdata.com/debian stable/main arm64 Packages
     2.0.1 500
        500 https://repos.influxdata.com/debian stable/main arm64 Packages
     2.0.0 500
        500 https://repos.influxdata.com/debian stable/main arm64 Packages
influxdb2:
  Installed: (none)
  Candidate: 2.7.6-1
  Version table:
     2.7.6-1 500
        500 https://repos.influxdata.com/debian stable/main arm64 Packages
     2.7.5-1 500
        500 https://repos.influxdata.com/debian stable/main arm64 Packages
     2.7.4-1 500
        500 https://repos.influxdata.com/debian stable/main arm64 Packages
     2.7.3-1 500
        500 https://repos.influxdata.com/debian stable/main arm64 Packages
     2.7.1-1 500
        500 https://repos.influxdata.com/debian stable/main arm64 Packages
     2.7.0-1 500
        500 https://repos.influxdata.com/debian stable/main arm64 Packages
     2.6.1-1 500
        500 https://repos.influxdata.com/debian stable/main arm64 Packages
     2.6.0-1 500
        500 https://repos.influxdata.com/debian stable/main arm64 Packages
     2.5.1-1 500
        500 https://repos.influxdata.com/debian stable/main arm64 Packages
     2.4.0-1 500
        500 https://repos.influxdata.com/debian stable/main arm64 Packages
     2.3.0-1 500
        500 https://repos.influxdata.com/debian stable/main arm64 Packages
     2.2.0 500
        500 https://repos.influxdata.com/debian stable/main arm64 Packages
pi@Homee:~ $

muss ich erst den Adapter löschen?

Thomas Braun

@sms sagte in Einrichtung Multihost klappt nicht - Meldung Slave:

systemctl status influxdb

sagt?

SMS

@thomas-braun

pi@Homee:~ $ systemctl status influxdb
○ influxdb.service - InfluxDB is an open-source, distributed, time series database
     Loaded: loaded (/lib/systemd/system/influxdb.service; enabled; preset: enabled)
     Active: inactive (dead)
       Docs: https://docs.influxdata.com/influxdb/
pi@Homee:~ $

Thomas Braun

@sms

Das Ding läuft nicht.

sudo systemctl start influxdb

SMS

@thomas-braun ich habe den doch jetzt aber mehrfach neu gestartet? Woran hast du das erkannt (für die Zukunft)?

Thomas Braun

@sms

 Active: inactive (dead)

Also ziemlich inaktiv...

SMS

@thomas-braun eindeutig!

jetzt läuft nur der Adapter DS18B20 nicht mehr.

ds18b20.1
	2024-05-30 22:52:51.757	warn	Error reading sensor 28-0120506f240b: Error: ENOENT: no such file or directory, open '/sys/bus/w1/devices/28-0120506f240b/w1_slave'
ds18b20.1
	2024-05-30 22:52:51.705	warn	Error reading sensor 28-0316a279ee0c: Error: ENOENT: no such file or directory, open '/sys/bus/w1/devices/28-0316a279ee0c/w1_slave'
ds18b20.1
	2024-05-30 22:52:51.656	warn	Error reading sensor 28-0316a2793d5d: Error: ENOENT: no such file or directory, open '/sys/bus/w1/devices/28-0316a2793d5d/w1_slave'
ds18b20.1
	2024-05-30 22:52:51.608	warn	Error reading sensor 28-01144fc984aa: Error: ENOENT: no such file or directory, open '/sys/bus/w1/devices/28-01144fc984aa/w1_slave'
ds18b20.1
	2024-05-30 22:52:51.560	warn	Error reading sensor 28-01144fb5fcaa: Error: ENOENT: no such file or directory, open '/sys/bus/w1/devices/28-01144fb5fcaa/w1_slave'
ds18b20.1
	2024-05-30 22:52:51.512	warn	Error reading sensor 28-01144fb07eaa: Error: ENOENT: no such file or directory, open '/sys/bus/w1/devices/28-01144fb07eaa/w1_slave'
ds18b20.1
	2024-05-30 22:52:51.464	warn	Error reading sensor 28-01144fa090aa: Error: ENOENT: no such file or directory, open '/sys/bus/w1/devices/28-01144fa090aa/w1_slave'
ds18b20.1
	2024-05-30 22:52:51.413	warn	Error reading sensor 28-01144f9dd2aa: Error: ENOENT: no such file or directory, open '/sys/bus/w1/devices/28-01144f9dd2aa/w1_slave'
ds18b20.1
	2024-05-30 22:52:51.360	warn	Error reading sensor 28-01144f959aaa: Error: ENOENT: no such file or directory, open '/sys/bus/w1/devices/28-01144f959aaa/w1_slave'
ds18b20.1
	2024-05-30 22:52:51.253	info	starting. Version 2.0.5 in /opt/iobroker/node_modules/iobroker.ds18b20, node: v20.14.0, js-controller: 5.0.19
ds18b20.1
	2024-05-30 22:52:43.051	info	terminating
ds18b20.1
	2024-05-30 22:52:42.619	info	Terminated (ADAPTER_REQUESTED_TERMINATION): Without reason
ds18b20.1
	2024-05-30 22:52:42.617	info	terminating
ds18b20.1
	2024-05-30 22:52:42.567	info	Got terminate signal TERMINATE_YOURSELF
ds18b20.1
	2024-05-30 22:52:42.562	info	Got terminate signal TERMINATE_YOURSELF
ds18b20.1
	2024-05-30 22:52:42.558	info	Got terminate signal TERMINATE_YOURSELF
ds18b20.1
	2024-05-30 22:52:42.556	info	Got terminate signal TERMINATE_YOURSELF
ds18b20.1
	2024-05-30 22:52:42.545	info	Got terminate signal TERMINATE_YOURSELF

da fehlt bestimmt auch irgendwas

Thomas Braun

@sms sagte in Einrichtung Multihost klappt nicht - Meldung Slave:

Ist das ein Raspberry da? Ist das '1-wire'-Interface aktiv?

Homoran

@thomas-braun sagte in Einrichtung Multihost klappt nicht - Meldung Slave:

@sms sagte in Einrichtung Multihost klappt nicht - Meldung Slave:

Ist das ein Raspberry da? Ist das '1-wire'-Interface aktiv?

laut username ein pi und ein bookworm.

SMS

@homoran hier habe ich es aktiviert:

sudo raspi-config

Thomas Braun

@homoran sagte in Einrichtung Multihost klappt nicht - Meldung Slave:

laut username ein pi

Auf usernames geb ich nix. Scheinbar wird pi für alles mögliche verwendet. Wobei das selbst auf Raspberry OS nicht mehr verwendet werden soll sondern individuelle usernames empfohlen werden.

haselchen

@sms sagte in Einrichtung Multihost klappt nicht - Meldung Slave:

ds18b20.1

Hast du noch eine andere Instanz davon?

ds18b20.1

Homoran

@thomas-braun sagte in Einrichtung Multihost klappt nicht - Meldung Slave:

Scheinbar wird pi für alles mögliche verwendet.

jepp, ist auch bei mir der Standard Username, egal wo. Abet mit anderen Passworten

SMS

@homoran also der pi hat schon einen eigenen Namen. Nur beim anmelden ist der Benutzername pi.

Auf einem anderen pi läuft die Instanz. Denke das ich ein Spannungsproblem habe. 4 von den 8 Sensoren zeigen Werte an. Muss ich morgen mal schauen

jetzt muss ich noch grafana installieren. Nach deiner Anleitung:

pi@Homee:~ $ sudo apt-get install -y apt-transport-https
Reading package lists... Done
Building dependency tree... Done
Reading state information... Done
The following packages were automatically installed and are no longer required:
  libraspberrypi0 libwpe-1.0-1 libwpebackend-fdo-1.0-1
Use 'sudo apt autoremove' to remove them.
The following NEW packages will be installed:
  apt-transport-https
0 upgraded, 1 newly installed, 0 to remove and 0 not upgraded.
Need to get 25.2 kB of archives.
After this operation, 35.8 kB of additional disk space will be used.
Get:1 http://deb.debian.org/debian bookworm/main arm64 apt-transport-https all 2.6.1 [25.2 kB]
Fetched 25.2 kB in 0s (295 kB/s)
Selecting previously unselected package apt-transport-https.
(Reading database ... 158457 files and directories currently installed.)
Preparing to unpack .../apt-transport-https_2.6.1_all.deb ...
Unpacking apt-transport-https (2.6.1) ...
Setting up apt-transport-https (2.6.1) ...
pi@Homee:~ $ sudo apt-get install -y software-properties-common wget
Reading package lists... Done
Building dependency tree... Done
Reading state information... Done
wget is already the newest version (1.21.3-1+b1).
wget set to manually installed.
The following packages were automatically installed and are no longer required:
  libraspberrypi0 libwpe-1.0-1 libwpebackend-fdo-1.0-1
Use 'sudo apt autoremove' to remove them.
The following additional packages will be installed:
  python3-httplib2 python3-lazr.restfulclient python3-lazr.uri python3-pyparsing python3-software-properties python3-wadllib
Suggested packages:
  python-pyparsing-doc
The following NEW packages will be installed:
  python3-httplib2 python3-lazr.restfulclient python3-lazr.uri python3-pyparsing python3-software-properties python3-wadllib
  software-properties-common
0 upgraded, 7 newly installed, 0 to remove and 0 not upgraded.
Need to get 370 kB of archives.
After this operation, 1,836 kB of additional disk space will be used.
Get:1 http://deb.debian.org/debian bookworm/main arm64 python3-pyparsing all 3.0.9-1 [138 kB]
Get:2 http://deb.debian.org/debian bookworm/main arm64 python3-httplib2 all 0.20.4-3 [36.0 kB]
Get:3 http://deb.debian.org/debian bookworm/main arm64 python3-lazr.uri all 1.0.6-3 [13.7 kB]
Get:4 http://deb.debian.org/debian bookworm/main arm64 python3-wadllib all 1.3.6-4 [37.2 kB]
Get:5 http://deb.debian.org/debian bookworm/main arm64 python3-lazr.restfulclient all 0.14.5-1 [50.4 kB]
Get:6 http://deb.debian.org/debian bookworm/main arm64 python3-software-properties all 0.99.30-4 [32.7 kB]
Get:7 http://deb.debian.org/debian bookworm/main arm64 software-properties-common all 0.99.30-4 [62.0 kB]
Fetched 370 kB in 0s (4,820 kB/s)
Selecting previously unselected package python3-pyparsing.
(Reading database ... 158461 files and directories currently installed.)
Preparing to unpack .../0-python3-pyparsing_3.0.9-1_all.deb ...
Unpacking python3-pyparsing (3.0.9-1) ...
Selecting previously unselected package python3-httplib2.
Preparing to unpack .../1-python3-httplib2_0.20.4-3_all.deb ...
Unpacking python3-httplib2 (0.20.4-3) ...
Selecting previously unselected package python3-lazr.uri.
Preparing to unpack .../2-python3-lazr.uri_1.0.6-3_all.deb ...
Unpacking python3-lazr.uri (1.0.6-3) ...
Selecting previously unselected package python3-wadllib.
Preparing to unpack .../3-python3-wadllib_1.3.6-4_all.deb ...
Unpacking python3-wadllib (1.3.6-4) ...
Selecting previously unselected package python3-lazr.restfulclient.
Preparing to unpack .../4-python3-lazr.restfulclient_0.14.5-1_all.deb ...
Unpacking python3-lazr.restfulclient (0.14.5-1) ...
Selecting previously unselected package python3-software-properties.
Preparing to unpack .../5-python3-software-properties_0.99.30-4_all.deb ...
Unpacking python3-software-properties (0.99.30-4) ...
Selecting previously unselected package software-properties-common.
Preparing to unpack .../6-software-properties-common_0.99.30-4_all.deb ...
Unpacking software-properties-common (0.99.30-4) ...
Setting up python3-lazr.uri (1.0.6-3) ...
Setting up python3-pyparsing (3.0.9-1) ...
Setting up python3-wadllib (1.3.6-4) ...
Setting up python3-httplib2 (0.20.4-3) ...
Setting up python3-lazr.restfulclient (0.14.5-1) ...
Setting up python3-software-properties (0.99.30-4) ...
Setting up software-properties-common (0.99.30-4) ...
Processing triggers for man-db (2.11.2-2) ...
Processing triggers for dbus (1.14.10-1~deb12u1) ...
pi@Homee:~ $ sudo wget -q -O /usr/share/keyrings/grafana.key https://apt.grafana.com/gpg.key
pi@Homee:~ $ echo "deb [signed-by=/usr/share/keyrings/grafana.key] https://apt.grafana.com stable main" | sudo tee /etc/apt/sources.list.d/grafana.list
deb [signed-by=/usr/share/keyrings/grafana.key] https://apt.grafana.com stable main
pi@Homee:~ $

Alles richtig?

Thomas Braun

@sms

Laufen die Kernelmodule dazu?

lsmod

bzw

lsmod | grep w1

anschauen.
Wobei ich von 1-wire keine Ahnung habe, ob sich das nicht wegen GPIO-Umstellereien im aktuellen Raspberry OS wieder alles geändert hat.

Thomas Braun

@sms sagte in Einrichtung Multihost klappt nicht - Meldung Slave:

Alles richtig?

Ich denke.
Hast du das aus den 'phantastischen Repos' kopiert?

SMS

@thomas-braun sagte in Einrichtung Multihost klappt nicht - Meldung Slave:

@sms

Laufen die Kernelmodule dazu?
lsmod

pi@Homee:~ $ lsmod
Module                  Size  Used by
rfcomm                 53248  4
snd_seq_dummy          12288  0
snd_hrtimer            12288  1
snd_seq                81920  7 snd_seq_dummy
snd_seq_device         16384  1 snd_seq
cmac                   12288  3
algif_hash             12288  1
aes_arm64              12288  3
aes_generic            32768  1 aes_arm64
algif_skcipher         12288  1
af_alg                 28672  6 algif_hash,algif_skcipher
bnep                   24576  2
brcmfmac_wcc           12288  0
ftdi_sio               53248  0
brcmfmac              348160  1 brcmfmac_wcc
usbserial              45056  1 ftdi_sio
binfmt_misc            16384  1
hci_uart               49152  0
btbcm                  24576  1 hci_uart
brcmutil               24576  1 brcmfmac
bluetooth             606208  33 hci_uart,btbcm,bnep,rfcomm
rpivid_hevc            45056  0
bcm2835_codec          45056  0
cfg80211              995328  1 brcmfmac
bcm2835_isp            28672  0
v4l2_mem2mem           53248  2 bcm2835_codec,rpivid_hevc
ecdh_generic           16384  2 bluetooth
bcm2835_v4l2           40960  0
bcm2835_mmal_vchiq     36864  3 bcm2835_codec,bcm2835_v4l2,bcm2835_isp
ecc                    36864  1 ecdh_generic
videobuf2_vmalloc      12288  1 bcm2835_v4l2
videobuf2_dma_contig    20480  3 bcm2835_codec,rpivid_hevc,bcm2835_isp
videobuf2_memops       12288  2 videobuf2_vmalloc,videobuf2_dma_contig
libaes                 12288  3 aes_arm64,bluetooth,aes_generic
raspberrypi_hwmon      12288  0
videobuf2_v4l2         32768  5 bcm2835_codec,bcm2835_v4l2,rpivid_hevc,v4l2_mem2mem,bcm2835_isp
rfkill                 32768  6 bluetooth,cfg80211
videodev              319488  6 bcm2835_codec,videobuf2_v4l2,bcm2835_v4l2,rpivid_hevc,v4l2_mem2mem,bcm2835_isp
raspberrypi_gpiomem    12288  0
videobuf2_common       73728  9 bcm2835_codec,videobuf2_vmalloc,videobuf2_dma_contig,videobuf2_v4l2,bcm2835_v4l2,rpivid_hevc,v4l2_mem2mem,videobuf2_memops,bcm2835_isp
mc                     65536  7 videodev,bcm2835_codec,videobuf2_v4l2,videobuf2_common,rpivid_hevc,v4l2_mem2mem,bcm2835_isp
snd_bcm2835            24576  1
vc_sm_cma              28672  2 bcm2835_mmal_vchiq,bcm2835_isp
nvmem_rmem             12288  0
uio_pdrv_genirq        12288  0
uio                    20480  1 uio_pdrv_genirq
i2c_dev                16384  0
fuse                  139264  5
dm_mod                143360  0
ip_tables              32768  0
x_tables               57344  1 ip_tables
ipv6                  573440  73
vc4                   372736  10
snd_soc_hdmi_codec     20480  2
drm_display_helper     16384  1 vc4
cec                    53248  1 vc4
drm_dma_helper         24576  2 vc4
drm_kms_helper        233472  2 drm_dma_helper,vc4
snd_soc_core          307200  2 vc4,snd_soc_hdmi_codec
v3d                    90112  4
snd_compress           20480  1 snd_soc_core
gpu_sched              53248  1 v3d
drm_shmem_helper       24576  1 v3d
snd_pcm_dmaengine      16384  1 snd_soc_core
drm                   688128  17 gpu_sched,drm_kms_helper,drm_dma_helper,v3d,vc4,drm_shmem_helper,drm_display_helper
drm_panel_orientation_quirks    24576  1 drm
snd_pcm               151552  5 snd_bcm2835,snd_soc_hdmi_codec,snd_compress,snd_soc_core,snd_pcm_dmaengine
i2c_brcmstb            12288  0
snd_timer              36864  3 snd_seq,snd_hrtimer,snd_pcm
snd                   122880  12 snd_seq,snd_seq_device,snd_bcm2835,snd_soc_hdmi_codec,snd_timer,snd_compress,snd_soc_core,snd_pcm
backlight              24576  1 drm
pi@Homee:~ $

bzw

lsmod | grep w1

pi@Homee:~ $ lsmod | grep w1
pi@Homee:~ $

Ja, habe ich von dir

Thomas Braun

@sms

Dann halt wie üblich:

sudo apt update
sudo apt install grafana

Zu 1wire kann ich dir nix sagen, hab ich noch nie mit zu tun gehabt.

NEWS

Einrichtung Multihost klappt nicht - Meldung Slave

Support us

735
Online

31.9k
Users

80.3k
Topics

1.3m
Posts

NEWS

Einrichtung Multihost klappt nicht - Meldung Slave

Support us

735Online

31.9kUsers

80.3kTopics

1.3mPosts

735
Online

31.9k
Users

80.3k
Topics

1.3m
Posts