z-wave2 - Log-Ausgabe

[PackElend]

Hallo zusammen,
ich wechsle gerade von Z-Way Server auf iobroker und ich verzweifle am SmartStart.

Habe ich irgendeine Möglichkeit von diesen Hex Zahlen auf die Serienummer des Shelly Shutter zu schliessen?

2025-01-13T19:52:16.489Z SERIAL « 0x0121004985001bd3f4b812130407015e858e595586725a877380989f307071846 (35 bytes)
                                  c7ab2
2025-01-13T19:52:16.492Z SERIAL » [ACK]                                                                   (0x06)
2025-01-13T19:52:16.495Z DRIVER « [REQ] [ApplicationUpdateRequest]
                                    type:                  SmartStart_HomeId_Received
                                    remote node ID:        0
                                    NWI home ID:           0xd3f4b812
                                    basic device class:    4
                                    generic device class:  7
                                    specific device class: 1
                                    supported CCs:
                                    · Z-Wave Plus Info
                                    · Association
                                    · Multi Channel Association
                                    · Association Group Information
                                    · Transport Service
                                    · Version
                                    · Manufacturer Specific
                                    · Device Reset Locally
                                    · Indicator
                                    · Powerlevel
                                    · Battery
                                    · Security
                                    · Security 2
                                    · Binary Sensor
                                    · Configuration
                                    · Notification
                                    · Wake Up
                                    · Supervision
                                    · Firmware Update Meta Data
2025-01-13T19:52:16.498Z CNTRLR   Received Smart Start inclusion request
2025-01-13T19:52:16.499Z CNTRLR   NWI Home ID not found in provisioning list, ignoring request...
2025-01-13T19:52:31.400Z SERIAL » 0x0103003bc7                                                         (5 bytes)
2025-01-13T19:52:31.402Z DRIVER » [REQ] [GetBackgroundRSSI]
2025-01-13T19:52:31.407Z SERIAL « [ACK]                                                                   (0x06)
2025-01-13T19:52:31.414Z SERIAL « 0x0107013b9891917f25                                                 (9 bytes)
2025-01-13T19:52:31.416Z SERIAL » [ACK]                                                                   (0x06)
2025-01-13T19:52:31.418Z DRIVER « [RES] [GetBackgroundRSSI]
                                    channel 0: -104 dBm
                                    channel 1: -111 dBm
                                    channel 2: -111 dBm
2025-01-13T19:53:01.404Z SERIAL » 0x0103003bc7                                         

danke
stefan

[PackElend]

wenn jemand mal vor der gleichen Frage steht, schau hier: Smart Start inclusion requests ignored because "NWI Home ID not found in provisioning list, ignoring request..."? - Configuration / Z-Wave - Home Assistant Community
Habe es noch nicht ausprobiert.