FritzBox Zigbee Antenne in ioBroker einbinden?
-
@searcher57 ein RasPi5 hat doch mehr als 1 USB Buchse!
-
@homoran said in FritzBox Zigbee Antenne in ioBroker einbinden?:
@searcher57 ein RasPi5 hat doch mehr als 1 USB Buchse!
Ja, da hast Du recht! Aber ich kann nur eine serielle Schnittstelle nutzen.
-
@searcher57 sagte in FritzBox Zigbee Antenne in ioBroker einbinden?:
@hssk said in FritzBox Zigbee Antenne in ioBroker einbinden?:
@mkdd-online Hallo, ist ein iobroker-Zugriff auf zigbee-Geräte nur über den FritzBox DECT Adapter möglich? Oder geht dies auch direkt über die FritzBox 7690?
Hallo,
ich beabsichtige mir ein FRITZ!Smart Gateway zu kaufen. Ich will damit erreichen, dass der Zigbee USB Stick überflüssig wird, der ja die Zigbee-Komponenten über eine serielle Schnittstelle in den Raspi 5 einbindet. Diese will ich aber für den Smartmeter-Adapter nutzen über den ich die Stromdaten erhalte. Dafür habe ich bisher einen 2. Raspi genutzt, der ja dann überflüssig wäre. Kannst Du oder irgend jemand sagen, ob ich das richtig sehe?Ich gehe davon aus das das (abhängig von Deinen Zigbee-Geräten) gehen kann.
Aber: Warum besorgst Du dir nicht einfach einen Lan Koordinator (z.Bsp. den von Cod.M) ? Dann kannst du den Zigbee Adapter wie er ist weiter nutzen, und ggf. sogar direkt übernehmen - hängt davon ab was du für einen USB Stick hast.
Auch: Was hat die serielle Schnittstelle damit zu tun ? Der Raspi hat 4x USB. Sind die bereits alle Belegt ? Das System verträgt ohne Probleme mehrere Serial->USB Konverter, zur Not sogar über einen Hub.
Generell ist meine Erfahrung das die Zigbee Geräte über die Fritz-Box nur bedingt gehen.
A.
-
@searcher57 sagte in FritzBox Zigbee Antenne in ioBroker einbinden?:
Ich will damit erreichen, dass der Zigbee USB Stick überflüssig wird, der ja die Zigbee-Komponenten über eine serielle Schnittstelle in den Raspi 5 einbindet. Diese will ich aber für den Smartmeter-Adapter nutzen über den ich die Stromdaten erhalte.
Du schreibst überraschendes.
Einen USB-Zigbee Adapter wie den Conbee (https://phoscon.de/de/conbee2/) betreibt man an der USB-Buchse und das hat m.E. nichts mit "seriell" zu tun bzw. würde etwas einschränken.Wenn Du ein Smartmeter auslesen willst, dann kann man das über sowas wie einen Wattwächter (https://www.amazon.de/WattWächter-Stromzähler-SmartMeter-vorinstalliert-Volkszähler/dp/B0DDHPZQPX) tun, der sich per WLAN und MQTT verbindet.
Dann sind immer noch 3 USB-Buchsen für irgendwas frei verfügbar am Raspi.
Und bzgl. des AVM Zigbee Adapters würde ich immer rest prüfen, welche Geräte er wie gut unterstützt. Nicht jeder Zigbee-Empfänger kann mit jedem Gerät. Und manche Empfänger sind schwach supported, weil dieser Support aufwendig ist.
-
@homoran said in FritzBox Zigbee Antenne in ioBroker einbinden?:
@searcher57 ein RasPi5 hat doch mehr als 1 USB Buchse!
Das Problem habe ich schon mehrfach erwähnt. Ich lese den Stromzähler über die GPIO Schnittstelle aus und damit wird die Möglichkeit des Zigbee Adapters blockiert.
-
@searcher57 sagte in FritzBox Zigbee Antenne in ioBroker einbinden?:
@homoran said in FritzBox Zigbee Antenne in ioBroker einbinden?:
@searcher57 ein RasPi5 hat doch mehr als 1 USB Buchse!
Das Problem habe ich schon mehrfach erwähnt. Ich lese den Stromzähler über die GPIO Schnittstelle aus und damit wird die Möglichkeit des Zigbee Adapters blockiert.
Diese Aussage macht keinen Sinn.
- der Zigbee-Adapter nutzt die GPIO's nicht.
- Einzig die raspbee/raspbee2 Platinen nutzen die GPIO. Austausch der Hardware wie oben geschrieben gegen ein Lan Gateway reicht. Du schreibst aber auch das du einen USB Stick hast. Also sollte das nicht Dein Problem sein
- Serielle Schnittstellen die über USB angebunden werden laufen auch nicht via GPIO
A.
Nachtrag: Es ist bekannt das das Fritz Smart Home maximal 100 Smart Home Geräte (50 an der Box, 50 am Gateway). Das gilt für Zigbee und Dect gemeinsam.
Ich hab in meiner kleinen Wohnung schon 75
-
@asgothian said in FritzBox Zigbee Antenne in ioBroker einbinden?:
@searcher57 sagte in FritzBox Zigbee Antenne in ioBroker einbinden?:
@homoran said in FritzBox Zigbee Antenne in ioBroker einbinden?:
@searcher57 ein RasPi5 hat doch mehr als 1 USB Buchse!
Das Problem habe ich schon mehrfach erwähnt. Ich lese den Stromzähler über die GPIO Schnittstelle aus und damit wird die Möglichkeit des Zigbee Adapters blockiert.
Diese Aussage macht keinen Sinn.
- der Zigbee-Adapter nutzt die GPIO's nicht.
- Einzig die raspbee/raspbee2 Platinen nutzen die GPIO. Austausch der Hardware wie oben geschrieben gegen ein Lan Gateway reicht. Du schreibst aber auch das du einen USB Stick hast. Also sollte das nicht Dein Problem sein
- Serielle Schnittstellen die über USB angebunden werden laufen auch nicht via GPIO
A.
Nachtrag: Es ist bekannt das das Fritz Smart Home maximal 100 Smart Home Geräte (50 an der Box, 50 am Gateway). Das gilt für Zigbee und Dect gemeinsam.
Ich hab in meiner kleinen Wohnung schon 75
Also ich bekomme es an meinem Raspi 5 nicht hin, den Zigbee USB Stick zu installieren und nehme an, dass das an meinem Adapter von Hausautomatisierung liegt, der die serielle Schnittstelle belegt. Denn an meinem Raspi 4 habe ich keine Probleme.
-
@searcher57 sagte in FritzBox Zigbee Antenne in ioBroker einbinden?:
Also ich bekomme es an meinem Raspi 5 nicht hin, den Zigbee USB Stick zu installieren und nehme an, dass das an meinem Adapter von Hausautomatisierung liegt, der die serielle Schnittstelle belegt. Denn an meinem Raspi 4 habe ich keine Probleme.
Link bitte auf den Adapter. Wenn der USB ist dann stimmt da was nicht (Alternativ: Bild)
A.
-
@asgothian möglicherweise liegt es am OS!
Kann sein, dass die Schnittstellenbezeichnungen geändert wurden -
@asgothian said in FritzBox Zigbee Antenne in ioBroker einbinden?:
@searcher57 sagte in FritzBox Zigbee Antenne in ioBroker einbinden?:
Also ich bekomme es an meinem Raspi 5 nicht hin, den Zigbee USB Stick zu installieren und nehme an, dass das an meinem Adapter von Hausautomatisierung liegt, der die serielle Schnittstelle belegt. Denn an meinem Raspi 4 habe ich keine Probleme.
Link bitte auf den Adapter. Wenn der USB ist dann stimmt da was nicht (Alternativ: Bild)
A.
Also nicht der Adapter! Aber ich habe den folgenden Lesekopf erfolgreich in Betrieb:
-
@searcher57 said in FritzBox Zigbee Antenne in ioBroker einbinden?:
@asgothian said in FritzBox Zigbee Antenne in ioBroker einbinden?:
@searcher57 sagte in FritzBox Zigbee Antenne in ioBroker einbinden?:
Also ich bekomme es an meinem Raspi 5 nicht hin, den Zigbee USB Stick zu installieren und nehme an, dass das an meinem Adapter von Hausautomatisierung liegt, der die serielle Schnittstelle belegt. Denn an meinem Raspi 4 habe ich keine Probleme.
Link bitte auf den Adapter. Wenn der USB ist dann stimmt da was nicht (Alternativ: Bild)
A.
Also nicht der Adapter! Aber ich habe den folgenden Lesekopf erfolgreich in Betrieb:
Und wenn ich den Smartmeter-Adapter lösche, dann kann ich auch den Zigbee-Adapter erfolgreich einrichten. Daher meine Frage, ob die Anschaffung und Einrichtung des AVM Zigbee Gateway eine Alternative wäre?
-
@searcher57 sagte in FritzBox Zigbee Antenne in ioBroker einbinden?:
@searcher57 said in FritzBox Zigbee Antenne in ioBroker einbinden?:
@asgothian said in FritzBox Zigbee Antenne in ioBroker einbinden?:
@searcher57 sagte in FritzBox Zigbee Antenne in ioBroker einbinden?:
Also ich bekomme es an meinem Raspi 5 nicht hin, den Zigbee USB Stick zu installieren und nehme an, dass das an meinem Adapter von Hausautomatisierung liegt, der die serielle Schnittstelle belegt. Denn an meinem Raspi 4 habe ich keine Probleme.
Link bitte auf den Adapter. Wenn der USB ist dann stimmt da was nicht (Alternativ: Bild)
A.
Also nicht der Adapter! Aber ich habe den folgenden Lesekopf erfolgreich in Betrieb:
Und wenn ich den Smartmeter-Adapter lösche, dann kann ich auch den Zigbee-Adapter erfolgreich einrichten. Daher meine Frage, ob die Anschaffung und Einrichtung des AVM Zigbee Gateway eine Alternative wäre?
Nochmal - Dir kann nur geholfen werden wenn du hier Details zu deinem Zigbee Koordinator bereit stellst. Ein YouTube Video ist das nicht.
- Was ist das für Hardware
- Wo kommt sie her
- Wie wird sie verbunden
Was auch hilft:
- Smartmeter Lesekopf angeschlossen
- Zigbee Koordinator angeschlossen
dann auf der Konsole 'iob diag', und das Ergebnis (die Langfassung, nicht die Zusammenfassung) hier posten.
Dann können wir systematisch weiter machen. In wie weit das Fritz-Gateway eine Alternative ist habe ich oben bereits beantwortet. In meinen Augen ist es das nicht.
A.
-
@asgothian said in FritzBox Zigbee Antenne in ioBroker einbinden?:
@searcher57 sagte in FritzBox Zigbee Antenne in ioBroker einbinden?:
@searcher57 said in FritzBox Zigbee Antenne in ioBroker einbinden?:
@asgothian said in FritzBox Zigbee Antenne in ioBroker einbinden?:
@searcher57 sagte in FritzBox Zigbee Antenne in ioBroker einbinden?:
Also ich bekomme es an meinem Raspi 5 nicht hin, den Zigbee USB Stick zu installieren und nehme an, dass das an meinem Adapter von Hausautomatisierung liegt, der die serielle Schnittstelle belegt. Denn an meinem Raspi 4 habe ich keine Probleme.
Link bitte auf den Adapter. Wenn der USB ist dann stimmt da was nicht (Alternativ: Bild)
A.
Also nicht der Adapter! Aber ich habe den folgenden Lesekopf erfolgreich in Betrieb:
Und wenn ich den Smartmeter-Adapter lösche, dann kann ich auch den Zigbee-Adapter erfolgreich einrichten. Daher meine Frage, ob die Anschaffung und Einrichtung des AVM Zigbee Gateway eine Alternative wäre?
Nochmal - Dir kann nur geholfen werden wenn du hier Details zu deinem Zigbee Koordinator bereit stellst. Ein YouTube Video ist das nicht.
- Was ist das für Hardware
- Wo kommt sie her
- Wie wird sie verbunden
Was auch hilft:
- Smartmeter Lesekopf angeschlossen
- Zigbee Koordinator angeschlossen
dann auf der Konsole 'iob diag', und das Ergebnis (die Langfassung, nicht die Zusammenfassung) hier posten.
Dann können wir systematisch weiter machen. In wie weit das Fritz-Gateway eine Alternative ist habe ich oben bereits beantwortet. In meinen Augen ist es das nicht.
A.
Der Zigbee Koordinator ist der Sonoff_Zigbee_3.0_USB_Dongle_Plus.
Er steckt in einer der USB Buchsen eines Raspi 4.
Der Smartmeter IR Lesekopf ist an J8 1 (Plus3,3 V); J8 6 (GND); J8 8 (TXD0); J8 10 (RXD0) am GPIO eines Raspi 5 angeschlossen.iob diag des Raspi 4:
```bash Script v.2025-02-23 *** BASE SYSTEM *** Static hostname: Raspi48GB Icon name: computer Operating System: Debian GNU/Linux 12 (bookworm) Kernel: Linux 6.12.20+rpt-rpi-v8 Architecture: arm64 OS is similar to: Model : Raspberry Pi 4 Model B Rev 1.5 Docker : false Virtualization : none Kernel : aarch64 Userland : 64 bit Systemuptime and Load: 16:33:32 up 3 days, 22:13, 2 users, load average: 0.19, 0.15, 0.16 CPU threads: 4 *** LIFE CYCLE STATUS *** Operating System is the current Debian stable version codenamed 'bookworm'! *** RASPBERRY THROTTLING *** Current issues: No throttling issues detected. Previously detected issues: No throttling issues detected. *** TIME AND TIMEZONES *** Local time: Wed 2025-05-07 16:33:32 CEST Universal time: Wed 2025-05-07 14:33:32 UTC RTC time: n/a Time zone: Europe/Berlin (CEST, +0200) System clock synchronized: yes NTP service: active RTC in local TZ: no *** Users and Groups *** User that called 'iob diag': pi HOME=/home/pi GROUPS=pi adm dialout cdrom sudo audio video plugdev games users input render netdev gpio i2c spi iobroker User that is running 'js-controller': iobroker HOME=/home/iobroker GROUPS=iobroker tty dialout audio video plugdev bluetooth gpio i2c *** DISPLAY-SERVER SETUP *** Display-Server: false Desktop: Terminal: tty *** MEMORY *** total used free shared buff/cache available Mem: 8.2G 1.9G 5.6G 1.2M 828M 6.3G Swap: 209M 0B 209M Total: 8.4G 1.9G 5.8G Active iob-Instances: 18 7809 M total memory 1782 M used memory 1850 M active memory 449 M inactive memory 5360 M free memory 116 M buffer memory 673 M swap cache 199 M total swap 0 M used swap 199 M free swap *** top - Table Of Processes *** top - 16:33:32 up 3 days, 22:13, 2 users, load average: 0.19, 0.15, 0.16 Tasks: 187 total, 1 running, 186 sleeping, 0 stopped, 0 zombie %Cpu(s): 0.0 us, 20.0 sy, 0.0 ni, 80.0 id, 0.0 wa, 0.0 hi, 0.0 si, 0.0 st MiB Mem : 7809.4 total, 5358.0 free, 1784.5 used, 790.2 buff/cache MiB Swap: 200.0 total, 200.0 free, 0.0 used. 6024.9 avail Mem *** FAILED SERVICES *** UNIT LOAD ACTIVE SUB DESCRIPTION 0 loaded units listed. *** DMESG CRITICAL ERRORS *** No critical errors detected *** FILESYSTEM *** Filesystem Type Size Used Avail Use% Mounted on udev devtmpfs 3.6G 0 3.6G 0% /dev tmpfs tmpfs 781M 1.2M 780M 1% /run /dev/mmcblk0p2 ext4 59G 9.7G 46G 18% / tmpfs tmpfs 3.9G 0 3.9G 0% /dev/shm tmpfs tmpfs 5.0M 16K 5.0M 1% /run/lock /dev/mmcblk0p1 vfat 510M 66M 445M 13% /boot/firmware /dev/sda1 exfat 3.9G 113M 3.7G 3% /mnt/usb0 tmpfs tmpfs 781M 0 781M 0% /run/user/1000 Messages concerning ext4 filesystem in dmesg: [Sat May 3 18:19:47 2025] Kernel command line: coherent_pool=1M 8250.nr_uarts=1 snd_bcm2835.enable_headphones=0 cgroup_disable=memory numa_policy=interleave snd_bcm2835.enable_headphones=1 snd_bcm2835.enable_hdmi=1 snd_bcm2835.enable_hdmi=0 smsc95xx.macaddr=D8:3A:DD:43:B6:26 vc_mem.mem_base=0x3ec00000 vc_mem.mem_size=0x40000000 console=tty1 root=PARTUUID=8ebf6d55-02 rootfstype=ext4 fsck.repair=yes rootwait [Sat May 3 18:19:49 2025] EXT4-fs (mmcblk0p2): mounted filesystem 93c89e92-8f2e-4522-ad32-68faed883d2f ro with ordered data mode. Quota mode: none. [Sat May 3 18:19:50 2025] EXT4-fs (mmcblk0p2): re-mounted 93c89e92-8f2e-4522-ad32-68faed883d2f r/w. Quota mode: none. Show mounted filesystems: TARGET SOURCE FSTYPE OPTIONS / /dev/mmcblk0p2 ext4 rw,noatime |-/boot/firmware /dev/mmcblk0p1 vfat rw,relatime,fmask=0022,dmask=0022,codepage=437,iocharset=ascii,shortname=mixed,errors=remount-ro `-/mnt/usb0 /dev/sda1 exfat rw,relatime,fmask=0000,dmask=0000,allow_utime=0022,iocharset=utf8,errors=remount-ro Files in neuralgic directories: /var: 1.4G /var/ 745M /var/log 744M /var/log/journal/0e010272fae14c1784990c1fc7429731 744M /var/log/journal 236M /var/cache Journal file /var/log/journal/0e010272fae14c1784990c1fc7429731/user-1001@00062a7f4e38fbb1-0ae92bb7e00931f0.journal~ is truncated, ignoring file. Archived and active journals take up 743.6M in the file system. /opt/iobroker/backups: 196M /opt/iobroker/backups/ /opt/iobroker/iobroker-data: 1.1G /opt/iobroker/iobroker-data/ 953M /opt/iobroker/iobroker-data/files 617M /opt/iobroker/iobroker-data/files/javascript.admin 560M /opt/iobroker/iobroker-data/files/javascript.admin/static 558M /opt/iobroker/iobroker-data/files/javascript.admin/static/js The five largest files in iobroker-data are: 35M /opt/iobroker/iobroker-data/files/devices.admin/static/js/main.24f2bb56.js.map 24M /opt/iobroker/iobroker-data/files/vis-2/static/js/main.f305bc29.js.map 24M /opt/iobroker/iobroker-data/files/vis-2/static/js/main.8e80ccb0.js.map 24M /opt/iobroker/iobroker-data/files/vis-2/customWidgets.js.map 19M /opt/iobroker/iobroker-data/files/text2command.admin/static/js/main.02fc3820.js.map USB-Devices by-id: USB-Sticks - Avoid direct links to /dev/tty* in your adapter setups, please always prefer the links 'by-id': /dev/serial/by-id/usb-ITead_Sonoff_Zigbee_3.0_USB_Dongle_Plus_0867d5d6b78ded11959b02f6b86ce6f8-if00-port0 *** ZigBee Settings *** Your zigbee.0 COM-Port is matching 'by-id'. Very good! Zigbee Network Settings on your coordinator/in nvbackup are: zigbee.X Extended Pan ID: *** MASKED *** Pan ID: *** MASKED *** Channel: *** MASKED *** Network Key: *** MASKED *** To unmask the settings run 'iob diag --unmask' *** NodeJS-Installation *** /usr/bin/nodejs v20.19.1 /usr/bin/node v20.19.1 /usr/bin/npm 10.8.2 /usr/bin/npx 10.8.2 /usr/bin/corepack 0.31.0 nodejs: Installed: 20.19.1-1nodesource1 Candidate: 20.19.1-1nodesource1 Version table: *** 20.19.1-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 100 /var/lib/dpkg/status 20.19.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.18.3-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.18.2-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.18.1-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.18.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.17.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.16.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.15.1-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.15.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.14.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.13.1-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.13.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.12.2-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.12.1-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.12.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.11.1-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.11.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.10.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.9.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.8.1-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.8.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.7.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.6.1-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.6.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.5.1-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.5.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.4.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.3.1-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.3.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.2.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.1.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.0.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 18.19.0+dfsg-6~deb12u2 500 500 http://deb.debian.org/debian bookworm/main arm64 Packages 18.19.0+dfsg-6~deb12u1 500 500 http://deb.debian.org/debian-security bookworm-security/main arm64 Packages Temp directories causing deletion problem: 0 No problems detected Errors in npm tree: 0 No problems detected *** ioBroker-Installation *** ioBroker Status iobroker is running on this host. Objects type: jsonl States type: jsonl Hosts: Raspi48GB Raspi48GB (version: 7.0.6, hostname: Raspi48GB , alive, uptime: 339213) Core adapters versions js-controller: 7.0.6 admin: 7.6.3 javascript: 8.8.3 nodejs modules from github: 0 Adapter State + system.adapter.admin.0 : admin : Raspi48GB - enabled, port: 8081, bind: 0.0.0.0, run as: admin + system.adapter.backitup.0 : backitup : Raspi48GB - enabled + system.adapter.discovery.0 : discovery : Raspi48GB - enabled + system.adapter.followthesun.0 : followthesun : Raspi48GB - enabled + system.adapter.frontier_silicon.0 : frontier_silicon : Raspi48GB - enabled + system.adapter.hm-rega.0 : hm-rega : Raspi48GB - enabled + system.adapter.hm-rpc.0 : hm-rpc : Raspi48GB - enabled, port: 0 + system.adapter.hm-rpc.1 : hm-rpc : Raspi48GB - enabled, port: 0 + system.adapter.javascript.0 : javascript : Raspi48GB - enabled + system.adapter.mqtt.0 : mqtt : Raspi48GB - enabled, port: 1883, bind: 0.0.0.0 + system.adapter.shelly.0 : shelly : Raspi48GB - enabled, port: 1882, bind: 0.0.0.0 + system.adapter.shelly.1 : shelly : Raspi48GB - enabled, port: 1882, bind: 0.0.0.0 + system.adapter.telegram.0 : telegram : Raspi48GB - enabled, port: 8443, bind: 0.0.0.0 + system.adapter.text2command.0 : text2command : Raspi48GB - enabled + system.adapter.vis-2.0 : vis-2 : Raspi48GB - enabled + system.adapter.web.0 : web : Raspi48GB - enabled, port: 8082, bind: 0.0.0.0, run as: admin system.adapter.yr.0 : yr : Raspi48GB - enabled + system.adapter.zigbee.0 : zigbee : Raspi48GB - enabled, port: /dev/serial/by-id/usb-ITead_Sonoff_Zigbee_3.0_USB_Dongle_Plus_0867d5d6b78ded11959b02f6b86ce6f8-if00-port0 + instance is alive Enabled adapters with bindings + system.adapter.admin.0 : admin : Raspi48GB - enabled, port: 8081, bind: 0.0.0.0, run as: admin + system.adapter.hm-rpc.0 : hm-rpc : Raspi48GB - enabled, port: 0 + system.adapter.hm-rpc.1 : hm-rpc : Raspi48GB - enabled, port: 0 + system.adapter.mqtt.0 : mqtt : Raspi48GB - enabled, port: 1883, bind: 0.0.0.0 + system.adapter.shelly.0 : shelly : Raspi48GB - enabled, port: 1882, bind: 0.0.0.0 + system.adapter.shelly.1 : shelly : Raspi48GB - enabled, port: 1882, bind: 0.0.0.0 + system.adapter.telegram.0 : telegram : Raspi48GB - enabled, port: 8443, bind: 0.0.0.0 + system.adapter.web.0 : web : Raspi48GB - enabled, port: 8082, bind: 0.0.0.0, run as: admin + system.adapter.zigbee.0 : zigbee : Raspi48GB - enabled, port: /dev/serial/by-id/usb-ITead_Sonoff_Zigbee_3.0_USB_Dongle_Plus_0867d5d6b78ded11959b02f6b86ce6f8-if00-port0 ioBroker-Repositories ┌─────────┬──────────┬─────────────────────────────────────────────────────────┬──────────────┐ │ (index) │ name │ url │ auto upgrade │ ├─────────┼──────────┼─────────────────────────────────────────────────────────┼──────────────┤ │ 0 │ 'stable' │ 'http://download.iobroker.net/sources-dist.json' │ false │ │ 1 │ 'beta' │ 'http://download.iobroker.net/sources-dist-latest.json' │ false │ └─────────┴──────────┴─────────────────────────────────────────────────────────┴──────────────┘ Active repo(s): stable Upgrade policy: none Installed ioBroker-Adapters Used repository: stable Adapter "admin" : 7.6.3 , installed 7.6.3 Adapter "backitup" : 3.0.31 , installed 3.0.31 Adapter "discovery" : 5.0.0 , installed 5.0.0 Adapter "followthesun" : 0.5.2 , installed 0.5.2 Adapter "frontier_silicon": 0.4.0 , installed 0.4.0 Adapter "hm-rega" : 5.1.0 , installed 5.1.0 Adapter "hm-rpc" : 2.0.2 , installed 2.0.2 Adapter "javascript" : 8.8.3 , installed 8.8.3 Controller "js-controller": 7.0.6 , installed 7.0.6 Adapter "mqtt" : 6.1.2 , installed 6.1.2 Adapter "shelly" : 9.2.0 , installed 9.2.0 Adapter "socketio" : 6.7.1 , installed 6.7.1 Adapter "telegram" : 4.1.0 , installed 4.1.0 Adapter "text2command" : 3.0.3 , installed 3.0.3 Adapter "vis-2" : 2.9.64 , installed 2.9.64 Adapter "web" : 7.0.8 , installed 7.0.8 Adapter "ws" : 2.6.2 , installed 2.6.2 Adapter "yr" : 5.3.0 , installed 5.3.0 Adapter "zigbee" : 2.0.5 , installed 2.0.5 Objects and States Please stand by - This may take a while Objects: 8176 States: 6839 *** OS-Repositories and Updates *** Hit:1 http://deb.debian.org/debian bookworm InRelease Hit:2 http://archive.raspberrypi.com/debian bookworm InRelease Hit:3 http://deb.debian.org/debian-security bookworm-security InRelease Hit:4 http://deb.debian.org/debian bookworm-updates InRelease Hit:5 https://repos.influxdata.com/debian stable InRelease Hit:6 https://deb.nodesource.com/node_20.x nodistro InRelease Reading package lists... Pending Updates: 5 *** Listening Ports *** Active Internet connections (only servers) Proto Recv-Q Send-Q Local Address Foreign Address State User Inode PID/Program name tcp 0 0 0.0.0.0:9000 0.0.0.0:* LISTEN 1001 7415 846/iobroker.js-con tcp 0 0 0.0.0.0:9001 0.0.0.0:* LISTEN 1001 7410 846/iobroker.js-con tcp 0 0 0.0.0.0:22 0.0.0.0:* LISTEN 0 597 729/sshd: /usr/sbin tcp 0 0 0.0.0.0:1882 0.0.0.0:* LISTEN 1001 7782 1100/io.shelly.1 tcp 0 0 192.168.178.74:2001 0.0.0.0:* LISTEN 1001 7072 1048/io.hm-rpc.1 tcp 0 0 192.168.178.74:42010 0.0.0.0:* LISTEN 1001 9257 1029/io.hm-rpc.0 tcp6 0 0 :::22 :::* LISTEN 0 599 729/sshd: /usr/sbin tcp6 0 0 :::8086 :::* LISTEN 999 5898 793/influxd tcp6 0 0 :::8082 :::* LISTEN 1001 7866 1206/io.web.0 tcp6 0 0 :::8081 :::* LISTEN 1001 6804 871/io.admin.0 udp 0 0 0.0.0.0:5353 0.0.0.0:* 104 465 597/avahi-daemon: r udp 0 0 0.0.0.0:5683 0.0.0.0:* 1001 7130 1085/io.shelly.0 udp 0 0 0.0.0.0:42793 0.0.0.0:* 104 467 597/avahi-daemon: r udp 0 0 0.0.0.0:59206 0.0.0.0:* 1001 1227685 1085/io.shelly.0 udp6 0 0 fe80::29e3:a8b6:106:546 :::* 0 1831 674/NetworkManager udp6 0 0 :::42077 :::* 104 468 597/avahi-daemon: r udp6 0 0 :::5353 :::* 104 466 597/avahi-daemon: r *** Log File - Last 25 Lines *** 2025-05-07 16:33:40.272 - info: frontier_silicon.0 (9526) Session 1335956371 with Device Büro Rainer @ 192.168.178.32 created 2025-05-07 16:33:45.640 - info: frontier_silicon.0 (9526) Session error, trying to reestablish session... 2025-05-07 16:33:45.648 - info: frontier_silicon.0 (9526) Trying to create session with Büro Rainer @ 192.168.178.32 ... 2025-05-07 16:33:45.683 - info: frontier_silicon.0 (9526) Session 1333214537 with Device Büro Rainer @ 192.168.178.32 created 2025-05-07 16:33:50.982 - info: frontier_silicon.0 (9526) Session error, trying to reestablish session... 2025-05-07 16:33:50.999 - info: frontier_silicon.0 (9526) Trying to create session with Büro Rainer @ 192.168.178.32 ... 2025-05-07 16:33:51.033 - info: frontier_silicon.0 (9526) Session 303681352 with Device Büro Rainer @ 192.168.178.32 created 2025-05-07 16:33:57.050 - info: frontier_silicon.0 (9526) Session error, trying to reestablish session... 2025-05-07 16:33:57.203 - info: frontier_silicon.0 (9526) Trying to create session with Büro Rainer @ 192.168.178.32 ... 2025-05-07 16:33:57.258 - info: frontier_silicon.0 (9526) Session 1627176082 with Device Büro Rainer @ 192.168.178.32 created 2025-05-07 16:34:02.379 - info: frontier_silicon.0 (9526) Session error, trying to reestablish session... 2025-05-07 16:34:03.498 - info: frontier_silicon.0 (9526) Trying to create session with Büro Rainer @ 192.168.178.32 ... 2025-05-07 16:34:03.566 - info: frontier_silicon.0 (9526) Session 1755935975 with Device Büro Rainer @ 192.168.178.32 created 2025-05-07 16:34:12.690 - info: frontier_silicon.0 (9526) Session error, trying to reestablish session... 2025-05-07 16:34:12.696 - info: frontier_silicon.0 (9526) Trying to create session with Büro Rainer @ 192.168.178.32 ... 2025-05-07 16:34:12.747 - info: frontier_silicon.0 (9526) Session 747212227 with Device Büro Rainer @ 192.168.178.32 created 2025-05-07 16:34:18.014 - info: frontier_silicon.0 (9526) Session error, trying to reestablish session... 2025-05-07 16:34:18.027 - info: frontier_silicon.0 (9526) Trying to create session with Büro Rainer @ 192.168.178.32 ... 2025-05-07 16:34:18.092 - info: frontier_silicon.0 (9526) Session 275369552 with Device Büro Rainer @ 192.168.178.32 created 2025-05-07 16:34:23.367 - info: frontier_silicon.0 (9526) Session error, trying to reestablish session... 2025-05-07 16:34:23.376 - info: frontier_silicon.0 (9526) Trying to create session with Büro Rainer @ 192.168.178.32 ... 2025-05-07 16:34:23.452 - info: frontier_silicon.0 (9526) Session 371385807 with Device Büro Rainer @ 192.168.178.32 created 2025-05-07 16:34:28.668 - info: frontier_silicon.0 (9526) Session error, trying to reestablish session... 2025-05-07 16:34:28.676 - info: frontier_silicon.0 (9526) Trying to create session with Büro Rainer @ 192.168.178.32 ... 2025-05-07 16:34:28.830 - info: frontier_silicon.0 (9526) Session 1485438321 with Device Büro Rainer @ 192.168.178.32 creatediob diag des Raspi 5:
Script v.2025-02-23 *** BASE SYSTEM *** Static hostname: Raspi58GB Icon name: computer Operating System: Debian GNU/Linux 12 (bookworm) Kernel: Linux 6.6.74+rpt-rpi-2712 Architecture: arm64 OS is similar to: Model : Raspberry Pi 5 Model B Rev 1.0 Docker : false Virtualization : none Kernel : aarch64 Userland : 64 bit Systemuptime and Load: 16:37:09 up 73 days, 1:16, 2 users, load average: 0.38, 0.24, 0.15 CPU threads: 4 *** LIFE CYCLE STATUS *** Operating System is the current Debian stable version codenamed 'bookworm'! *** RASPBERRY THROTTLING *** Current issues: No throttling issues detected. Previously detected issues: No throttling issues detected. *** TIME AND TIMEZONES *** Local time: Wed 2025-05-07 16:37:09 CEST Universal time: Wed 2025-05-07 14:37:09 UTC RTC time: Wed 2025-05-07 14:37:09 Time zone: Europe/Berlin (CEST, +0200) System clock synchronized: yes NTP service: active RTC in local TZ: no *** Users and Groups *** User that called 'iob diag': pi HOME=/home/pi GROUPS=pi adm dialout cdrom sudo audio video plugdev games users input render netdev gpio i2c spi iobroker User that is running 'js-controller': iobroker HOME=/home/iobroker GROUPS=iobroker tty dialout audio video plugdev bluetooth gpio i2c *** DISPLAY-SERVER SETUP *** Display-Server: false Desktop: Terminal: tty *** MEMORY *** total used free shared buff/cache available Mem: 8.4G 3.6G 1.3G 2.9M 3.7G 4.9G Swap: 209M 4.2M 205M Total: 8.7G 3.6G 1.5G Active iob-Instances: 30 8052 M total memory 3396 M used memory 4176 M active memory 2115 M inactive memory 1234 M free memory 134 M buffer memory 3386 M swap cache 199 M total swap 4 M used swap 195 M free swap *** top - Table Of Processes *** top - 16:37:09 up 73 days, 1:16, 2 users, load average: 0.43, 0.25, 0.15 Tasks: 192 total, 1 running, 191 sleeping, 0 stopped, 0 zombie %Cpu(s): 0.0 us, 0.0 sy, 0.0 ni, 88.9 id, 11.1 wa, 0.0 hi, 0.0 si, 0.0 st MiB Mem : 8052.2 total, 1235.1 free, 3395.7 used, 3521.1 buff/cache MiB Swap: 200.0 total, 196.0 free, 4.0 used. 4656.6 avail Mem *** FAILED SERVICES *** UNIT LOAD ACTIVE SUB DESCRIPTION 0 loaded units listed. *** DMESG CRITICAL ERRORS *** 15 CRITICAL ERRORS DETECTED! Check 'sudo dmesg --level=emerg,alert,crit -T' for details *** FILESYSTEM *** Filesystem Type Size Used Avail Use% Mounted on udev devtmpfs 3.9G 0 3.9G 0% /dev tmpfs tmpfs 806M 5.3M 800M 1% /run /dev/mmcblk0p2 ext4 59G 11G 45G 20% / tmpfs tmpfs 4.0G 0 4.0G 0% /dev/shm tmpfs tmpfs 5.0M 48K 5.0M 1% /run/lock /dev/sda1 exfat 29G 7.1G 22G 25% /mnt/usb0 /dev/mmcblk0p1 vfat 510M 66M 445M 13% /boot/firmware tmpfs tmpfs 806M 0 806M 0% /run/user/1000 Messages concerning ext4 filesystem in dmesg: [Sun Feb 23 14:20:43 2025] Kernel command line: reboot=w coherent_pool=1M 8250.nr_uarts=1 pci=pcie_bus_safe cgroup_disable=memory numa_policy=interleave smsc95xx.macaddr=2C:CF:67:2F:A6:31 vc_mem.mem_base=0x3fc00000 vc_mem.mem_size=0x40000000 console=tty1 console=ttyAMA10,115200 root=PARTUUID=70767922-02 rootfstype=ext4 fsck.repair=yes rootwait [Sun Feb 23 14:20:47 2025] EXT4-fs (mmcblk0p2): mounted filesystem 56f80fa2-e005-4cca-86e6-19da1069914d ro with ordered data mode. Quota mode: none. [Sun Feb 23 14:20:51 2025] EXT4-fs (mmcblk0p2): re-mounted 56f80fa2-e005-4cca-86e6-19da1069914d r/w. Quota mode: none. Show mounted filesystems: TARGET SOURCE FSTYPE OPTIONS / /dev/mmcblk0p2 ext4 rw,noatime |-/mnt/usb0 /dev/sda1 exfat rw,relatime,fmask=0000,dmask=0000,allow_utime=0022,iocharset=utf8,errors=remount-ro `-/boot/firmware /dev/mmcblk0p1 vfat rw,relatime,fmask=0022,dmask=0022,codepage=437,iocharset=ascii,shortname=mixed,errors=remount-ro Files in neuralgic directories: /var: 1.6G /var/ 976M /var/log/journal/61b86e93a3bd4c4e97ff911079b6083e 976M /var/log/journal 976M /var/log 208M /var/cache Archived and active journals take up 975.3M in the file system. /opt/iobroker/backups: 320M /opt/iobroker/backups/ /opt/iobroker/iobroker-data: 1.4G /opt/iobroker/iobroker-data/ 1.2G /opt/iobroker/iobroker-data/files 617M /opt/iobroker/iobroker-data/files/javascript.admin 560M /opt/iobroker/iobroker-data/files/javascript.admin/static 558M /opt/iobroker/iobroker-data/files/javascript.admin/static/js The five largest files in iobroker-data are: 38M /opt/iobroker/iobroker-data/files/iot.admin/static/js/main.d3d286bd.js.map 35M /opt/iobroker/iobroker-data/files/devices.admin/static/js/main.24f2bb56.js.map 32M /opt/iobroker/iobroker-data/objects.jsonl 27M /opt/iobroker/iobroker-data/files/tankerkoenig.admin/build/index.js.map 26M /opt/iobroker/iobroker-data/files/echarts/static/js/main.41cee985.js.map USB-Devices by-id: USB-Sticks - Avoid direct links to /dev/tty* in your adapter setups, please always prefer the links 'by-id': No Devices found 'by-id' *** ZigBee Settings *** Zigbee Network Settings on your coordinator/in nvbackup are: zigbee.X Extended Pan ID: *** MASKED *** Pan ID: *** MASKED *** Channel: *** MASKED *** Network Key: *** MASKED *** To unmask the settings run 'iob diag --unmask' *** NodeJS-Installation *** /usr/bin/nodejs v20.19.1 /usr/bin/node v20.19.1 /usr/bin/npm 10.8.2 /usr/bin/npx 10.8.2 /usr/bin/corepack 0.31.0 nodejs: Installed: 20.19.1-1nodesource1 Candidate: 20.19.1-1nodesource1 Version table: *** 20.19.1-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 100 /var/lib/dpkg/status 20.19.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.18.3-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.18.2-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.18.1-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.18.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.17.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.16.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.15.1-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.15.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.14.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.13.1-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.13.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.12.2-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.12.1-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.12.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.11.1-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.11.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.10.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.9.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.8.1-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.8.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.7.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.6.1-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.6.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.5.1-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.5.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.4.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.3.1-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.3.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.2.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.1.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.0.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 18.19.0+dfsg-6~deb12u2 500 500 http://deb.debian.org/debian bookworm/main arm64 Packages 18.19.0+dfsg-6~deb12u1 500 500 http://deb.debian.org/debian-security bookworm-security/main arm64 Packages Temp directories causing deletion problem: 0 No problems detected Errors in npm tree: 0 No problems detected *** ioBroker-Installation *** ioBroker Status iobroker is running on this host. Objects type: jsonl States type: jsonl Hosts: Raspi58GB Raspi58GB (version: 7.0.6, hostname: Raspi58GB , alive, uptime: 2678955) Core adapters versions js-controller: 7.0.6 admin: 7.6.3 javascript: 8.8.3 nodejs modules from github: 0 Adapter State + system.adapter.admin.0 : admin : Raspi58GB - enabled, port: 8081, bind: 0.0.0.0, run as: admin + system.adapter.alexa2.0 : alexa2 : Raspi58GB - enabled system.adapter.alias-manager.0 : alias-manager : Raspi58GB - disabled + system.adapter.awtrix-light.0 : awtrix-light : Raspi58GB - enabled + system.adapter.backitup.0 : backitup : Raspi58GB - enabled + system.adapter.broadlink2.0 : broadlink2 : Raspi58GB - enabled system.adapter.devices.0 : devices : Raspi58GB - disabled + system.adapter.discovery.0 : discovery : Raspi58GB - enabled + system.adapter.doorbird.0 : doorbird : Raspi58GB - enabled + system.adapter.echarts.0 : echarts : Raspi58GB - enabled + system.adapter.followthesun.0 : followthesun : Raspi58GB - enabled + system.adapter.fritzdect.0 : fritzdect : Raspi58GB - enabled + system.adapter.frontier_silicon.0 : frontier_silicon : Raspi58GB - enabled system.adapter.frontier_silicon.1 : frontier_silicon : Raspi58GB - disabled system.adapter.frontier_silicon.2 : frontier_silicon : Raspi58GB - disabled system.adapter.frontier_silicon.3 : frontier_silicon : Raspi58GB - disabled + system.adapter.hm-rega.0 : hm-rega : Raspi58GB - enabled + system.adapter.hm-rpc.0 : hm-rpc : Raspi58GB - enabled, port: 0 + system.adapter.hm-rpc.1 : hm-rpc : Raspi58GB - enabled, port: 0 + system.adapter.influxdb.0 : influxdb : Raspi58GB - enabled, port: 8086 + system.adapter.iot.0 : iot : Raspi58GB - enabled + system.adapter.javascript.0 : javascript : Raspi58GB - enabled + system.adapter.mqtt.0 : mqtt : Raspi58GB - enabled, port: 1883, bind: 0.0.0.0 system.adapter.openweathermap.0 : openweathermap : Raspi58GB - enabled + system.adapter.rpi2.0 : rpi2 : Raspi58GB - enabled + system.adapter.shelly.0 : shelly : Raspi58GB - enabled, port: 1882, bind: 0.0.0.0 + system.adapter.shelly.1 : shelly : Raspi58GB - enabled, port: 1882, bind: 0.0.0.0 + system.adapter.simple-api.0 : simple-api : Raspi58GB - enabled, port: 8087, bind: 0.0.0.0, run as: admin + system.adapter.smartmeter.0 : smartmeter : Raspi58GB - enabled + system.adapter.tankerkoenig.0 : tankerkoenig : Raspi58GB - enabled + system.adapter.telegram.0 : telegram : Raspi58GB - enabled, port: 8443, bind: 0.0.0.0 + system.adapter.text2command.0 : text2command : Raspi58GB - enabled + system.adapter.tr-064.0 : tr-064 : Raspi58GB - enabled + system.adapter.vis-2.0 : vis-2 : Raspi58GB - enabled + system.adapter.web.0 : web : Raspi58GB - enabled, port: 8082, bind: 0.0.0.0, run as: admin system.adapter.yr.0 : yr : Raspi58GB - enabled + instance is alive Enabled adapters with bindings + system.adapter.admin.0 : admin : Raspi58GB - enabled, port: 8081, bind: 0.0.0.0, run as: admin + system.adapter.hm-rpc.0 : hm-rpc : Raspi58GB - enabled, port: 0 + system.adapter.hm-rpc.1 : hm-rpc : Raspi58GB - enabled, port: 0 + system.adapter.influxdb.0 : influxdb : Raspi58GB - enabled, port: 8086 + system.adapter.mqtt.0 : mqtt : Raspi58GB - enabled, port: 1883, bind: 0.0.0.0 + system.adapter.shelly.0 : shelly : Raspi58GB - enabled, port: 1882, bind: 0.0.0.0 + system.adapter.shelly.1 : shelly : Raspi58GB - enabled, port: 1882, bind: 0.0.0.0 + system.adapter.simple-api.0 : simple-api : Raspi58GB - enabled, port: 8087, bind: 0.0.0.0, run as: admin + system.adapter.telegram.0 : telegram : Raspi58GB - enabled, port: 8443, bind: 0.0.0.0 + system.adapter.web.0 : web : Raspi58GB - enabled, port: 8082, bind: 0.0.0.0, run as: admin ioBroker-Repositories ┌─────────┬──────────┬─────────────────────────────────────────────────────────┬──────────────┐ │ (index) │ name │ url │ auto upgrade │ ├─────────┼──────────┼─────────────────────────────────────────────────────────┼──────────────┤ │ 0 │ 'stable' │ 'http://download.iobroker.net/sources-dist.json' │ false │ │ 1 │ 'beta' │ 'http://download.iobroker.net/sources-dist-latest.json' │ false │ └─────────┴──────────┴─────────────────────────────────────────────────────────┴──────────────┘ Active repo(s): stable Upgrade policy: none Installed ioBroker-Adapters Used repository: stable Adapter "admin" : 7.6.3 , installed 7.6.3 Adapter "alexa2" : 3.26.5 , installed 3.26.5 Adapter "alias-manager": 2.0.0 , installed 2.0.0 Adapter "awtrix-light" : 1.7.0 , installed 1.7.0 Adapter "backitup" : 3.0.31 , installed 3.0.31 Adapter "broadlink2" : 2.3.0 , installed 2.3.0 Adapter "devices" : 1.1.5 , installed 1.1.5 Adapter "discovery" : 5.0.0 , installed 5.0.0 Adapter "doorbird" : 3.0.0 , installed 3.0.0 Adapter "echarts" : 1.9.2 , installed 1.9.2 Adapter "followthesun" : 0.5.2 , installed 0.5.2 Adapter "fritzdect" : 2.6.1 , installed 2.6.1 Adapter "frontier_silicon": 0.4.0 , installed 0.4.0 Adapter "hm-rega" : 5.1.0 , installed 5.1.0 Adapter "hm-rpc" : 2.0.2 , installed 2.0.2 Adapter "influxdb" : 4.0.2 , installed 4.0.2 Adapter "iot" : 3.3.0 , installed 3.3.0 Adapter "javascript" : 8.8.3 , installed 8.8.3 Controller "js-controller": 7.0.6 , installed 7.0.6 Adapter "mqtt" : 6.1.2 , installed 6.1.2 Adapter "openweathermap": 1.1.2 , installed 1.1.2 Adapter "rpi2" : 2.4.0 , installed 2.4.0 Adapter "shelly" : 9.2.0 , installed 9.2.0 Adapter "simple-api" : 2.8.0 , installed 2.8.0 Adapter "smartmeter" : 3.4.0 , installed 3.4.0 Adapter "socketio" : 6.7.1 , installed 7.0.8 Adapter "tankerkoenig" : 3.4.0 , installed 3.4.0 Adapter "telegram" : 4.1.0 , installed 4.1.0 Adapter "text2command" : 3.0.3 , installed 3.0.3 Adapter "tr-064" : 4.3.0 , installed 4.3.0 Adapter "vis-2" : 2.9.64 , installed 2.9.64 Adapter "web" : 7.0.8 , installed 7.0.8 Adapter "ws" : 2.6.2 , installed 3.0.19 Adapter "yr" : 5.3.0 , installed 5.3.0 Objects and States Please stand by - This may take a while Objects: 13146 States: 10488 *** OS-Repositories and Updates *** Hit:1 http://deb.debian.org/debian bookworm InRelease Hit:2 http://deb.debian.org/debian-security bookworm-security InRelease Hit:3 http://deb.debian.org/debian bookworm-updates InRelease Hit:4 https://repos.influxdata.com/debian stable InRelease Hit:5 http://archive.raspberrypi.com/debian bookworm InRelease Hit:6 https://repo.mosquitto.org/debian bookworm InRelease Hit:7 https://deb.nodesource.com/node_20.x nodistro InRelease Reading package lists... Pending Updates: 5 *** Listening Ports *** Active Internet connections (only servers) Proto Recv-Q Send-Q Local Address Foreign Address State User Inode PID/Program name tcp 0 0 192.168.178.57:8100 0.0.0.0:* LISTEN 1001 66463903 2033716/io.doorbird tcp 0 0 0.0.0.0:1883 0.0.0.0:* LISTEN 106 3863 805/mosquitto tcp 0 0 0.0.0.0:1882 0.0.0.0:* LISTEN 1001 56846557 1759981/io.shelly.1 tcp 0 0 192.168.178.57:2001 0.0.0.0:* LISTEN 1001 49470928 1527570/io.hm-rpc.1 tcp 0 0 192.168.178.57:42010 0.0.0.0:* LISTEN 1001 49469243 1527555/io.hm-rpc.0 tcp 0 0 0.0.0.0:9001 0.0.0.0:* LISTEN 1001 49470488 1526995/iobroker.js tcp 0 0 0.0.0.0:9000 0.0.0.0:* LISTEN 1001 49469536 1526995/iobroker.js tcp 0 0 0.0.0.0:22 0.0.0.0:* LISTEN 0 6088 809/sshd: /usr/sbin tcp6 0 0 :::8081 :::* LISTEN 1001 49468404 1527024/io.admin.0 tcp6 0 0 :::8082 :::* LISTEN 1001 49477905 1530303/io.web.0 tcp6 0 0 :::8087 :::* LISTEN 1001 49475575 1530213/io.simple-a tcp6 0 0 :::8086 :::* LISTEN 999 9328 860/influxd tcp6 0 0 :::1883 :::* LISTEN 106 3864 805/mosquitto tcp6 0 0 :::22 :::* LISTEN 0 6090 809/sshd: /usr/sbin udp 0 0 0.0.0.0:5683 0.0.0.0:* 1001 56844730 1759975/io.shelly.0 udp 0 0 0.0.0.0:46834 0.0.0.0:* 1001 49469185 1527480/io.broadlin udp 0 0 0.0.0.0:38802 0.0.0.0:* 1001 49471820 1527480/io.broadlin udp 0 0 0.0.0.0:55259 0.0.0.0:* 1001 49469189 1527480/io.broadlin udp 0 0 0.0.0.0:51356 0.0.0.0:* 1001 49469183 1527480/io.broadlin udp 0 0 0.0.0.0:15001 0.0.0.0:* 1001 49471816 1527480/io.broadlin udp 0 0 0.0.0.0:52059 0.0.0.0:* 1001 49469914 1527480/io.broadlin udp 0 0 0.0.0.0:56404 0.0.0.0:* 1001 49469186 1527480/io.broadlin udp 0 0 0.0.0.0:48497 0.0.0.0:* 104 5966 691/avahi-daemon: r udp 0 0 0.0.0.0:57052 0.0.0.0:* 1001 49469187 1527480/io.broadlin udp 0 0 0.0.0.0:53585 0.0.0.0:* 1001 49471819 1527480/io.broadlin udp 0 0 0.0.0.0:53789 0.0.0.0:* 1001 49469188 1527480/io.broadlin udp 0 0 0.0.0.0:33732 0.0.0.0:* 1001 49469182 1527480/io.broadlin udp 0 0 0.0.0.0:38117 0.0.0.0:* 1001 49469184 1527480/io.broadlin udp 0 0 0.0.0.0:5353 0.0.0.0:* 104 5964 691/avahi-daemon: r udp6 0 0 :::39826 :::* 104 5967 691/avahi-daemon: r udp6 0 0 fe80::2ca:bf0f:5188:546 :::* 0 54293794 1668473/NetworkMana udp6 0 0 :::5353 :::* 104 5965 691/avahi-daemon: r *** Log File - Last 25 Lines *** 2025-05-07 16:37:05.012 - info: frontier_silicon.0 (2672562) Session error, trying to reestablish session... 2025-05-07 16:37:05.016 - info: frontier_silicon.0 (2672562) Trying to create session with Büro Rainer @ 192.168.178.32 ... 2025-05-07 16:37:05.055 - info: frontier_silicon.0 (2672562) Session 2061721712 with Device Büro Rainer @ 192.168.178.32 created 2025-05-07 16:37:10.323 - info: frontier_silicon.0 (2672562) Session error, trying to reestablish session... 2025-05-07 16:37:10.325 - info: frontier_silicon.0 (2672562) Trying to create session with Büro Rainer @ 192.168.178.32 ... 2025-05-07 16:37:10.356 - info: frontier_silicon.0 (2672562) Session 451722005 with Device Büro Rainer @ 192.168.178.32 created 2025-05-07 16:37:15.643 - info: frontier_silicon.0 (2672562) Session error, trying to reestablish session... 2025-05-07 16:37:15.645 - info: frontier_silicon.0 (2672562) Trying to create session with Büro Rainer @ 192.168.178.32 ... 2025-05-07 16:37:15.686 - info: frontier_silicon.0 (2672562) Session 1952788329 with Device Büro Rainer @ 192.168.178.32 created 2025-05-07 16:37:20.967 - info: frontier_silicon.0 (2672562) Session error, trying to reestablish session... 2025-05-07 16:37:20.974 - info: frontier_silicon.0 (2672562) Trying to create session with Büro Rainer @ 192.168.178.32 ... 2025-05-07 16:37:21.004 - info: frontier_silicon.0 (2672562) Session 1135379361 with Device Büro Rainer @ 192.168.178.32 created 2025-05-07 16:37:26.288 - info: frontier_silicon.0 (2672562) Session error, trying to reestablish session... 2025-05-07 16:37:26.291 - info: frontier_silicon.0 (2672562) Trying to create session with Büro Rainer @ 192.168.178.32 ... 2025-05-07 16:37:26.349 - info: frontier_silicon.0 (2672562) Session 962948919 with Device Büro Rainer @ 192.168.178.32 created 2025-05-07 16:37:29.857 - error: host.Raspi58GB cannot call visUtils: Not exists 2025-05-07 16:37:31.627 - info: frontier_silicon.0 (2672562) Session error, trying to reestablish session... 2025-05-07 16:37:31.630 - info: frontier_silicon.0 (2672562) Trying to create session with Büro Rainer @ 192.168.178.32 ... 2025-05-07 16:37:31.686 - info: frontier_silicon.0 (2672562) Session 409573902 with Device Büro Rainer @ 192.168.178.32 created 2025-05-07 16:37:36.976 - info: frontier_silicon.0 (2672562) Session error, trying to reestablish session... 2025-05-07 16:37:36.980 - info: frontier_silicon.0 (2672562) Trying to create session with Büro Rainer @ 192.168.178.32 ... 2025-05-07 16:37:37.043 - info: frontier_silicon.0 (2672562) Session 488785493 with Device Büro Rainer @ 192.168.178.32 created 2025-05-07 16:37:42.318 - info: frontier_silicon.0 (2672562) Session error, trying to reestablish session... 2025-05-07 16:37:42.321 - info: frontier_silicon.0 (2672562) Trying to create session with Büro Rainer @ 192.168.178.32 ... 2025-05-07 16:37:42.476 - info: frontier_silicon.0 (2672562) Session 1811612933 with Device Büro Rainer @ 192.168.178.32 createdBeide funktionieren bestens. Ich möchte aber die Zigbee Komonenten im Raspi 5 integrieren und das funktioniert nur, wenn ich den IR Lesekopf abklemme und den Sonoff Zigbee 3.0 USB Dongle Plus in die USB Buchse stecke.
-
@searcher57 sagte in FritzBox Zigbee Antenne in ioBroker einbinden?:
Ich möchte aber die Zigbee Komonenten im Raspi 5 integrieren
und genau davon brauchen wir das iob diag!
da ist weder eine Zigbee instanz noch ein Koordinator am Pi5 -
@homoran said in FritzBox Zigbee Antenne in ioBroker einbinden?:
@searcher57 sagte in FritzBox Zigbee Antenne in ioBroker einbinden?:
Ich möchte aber die Zigbee Komonenten im Raspi 5 integrieren
und genau davon brauchen wir das iob diag!
da ist weder eine Zigbee instanz noch ein Koordinator am Pi5Nein, das habe ich doch geschrieben! Der Koordinator steckt im Raspi 4!
Das 2. iob diag ist vom Raspi 5, wie geschrieben. -
@searcher57 sagte in FritzBox Zigbee Antenne in ioBroker einbinden?:
das habe ich doch geschrieben!
ja! das wissen wir!
Aber das soll sich doch ändern und geht angeblich nicht.
Wie dollen wir dir helfen herauszufinden wo es dann klemmt, wenn wir keine entsprechenden Informationen über die nicht funktionierende Konfiguration bekommen? -
@searcher57 sagte in FritzBox Zigbee Antenne in ioBroker einbinden?:
@homoran said in FritzBox Zigbee Antenne in ioBroker einbinden?:
@searcher57 sagte in FritzBox Zigbee Antenne in ioBroker einbinden?:
Ich möchte aber die Zigbee Komonenten im Raspi 5 integrieren
und genau davon brauchen wir das iob diag!
da ist weder eine Zigbee instanz noch ein Koordinator am Pi5Nein, das habe ich doch geschrieben! Der Koordinator steckt im Raspi 4!
Das 2. iob diag ist vom Raspi 5, wie geschrieben.Das ist nicht das was benötigt wird. Also nochmal:
- Smartlesekopf anschliessen
- Koordinator anschliessen (am gleichen System)
iob diagausführen und hier posten.
Normalerweise gibt es keine Kollision zwischen der Aktivierung der seriellen Schnittstelle am GPIO und den seriellen Schnittstellen über USB.
A.
-
@asgothian said in FritzBox Zigbee Antenne in ioBroker einbinden?:
@searcher57 sagte in FritzBox Zigbee Antenne in ioBroker einbinden?:
@homoran said in FritzBox Zigbee Antenne in ioBroker einbinden?:
@searcher57 sagte in FritzBox Zigbee Antenne in ioBroker einbinden?:
Ich möchte aber die Zigbee Komonenten im Raspi 5 integrieren
und genau davon brauchen wir das iob diag!
da ist weder eine Zigbee instanz noch ein Koordinator am Pi5Nein, das habe ich doch geschrieben! Der Koordinator steckt im Raspi 4!
Das 2. iob diag ist vom Raspi 5, wie geschrieben.Das ist nicht das was benötigt wird. Also nochmal:
- Smartlesekopf anschliessen
- Koordinator anschliessen (am gleichen System)
iob diagausführen und hier posten.
Normalerweise gibt es keine Kollision zwischen der Aktivierung der seriellen Schnittstelle am GPIO und den seriellen Schnittstellen über USB.
A.
Ok, das habe ich missverstanden!
Der Koordinator ist im Raspi 5 und der Zigbee Adapter installiert.
Hier das Protokoll:
und hier das iob diag:
```bash Script v.2025-02-23 *** BASE SYSTEM *** Static hostname: Raspi58GB Icon name: computer Operating System: Debian GNU/Linux 12 (bookworm) Kernel: Linux 6.6.74+rpt-rpi-2712 Architecture: arm64 OS is similar to: Model : Raspberry Pi 5 Model B Rev 1.0 Docker : false Virtualization : none Kernel : aarch64 Userland : 64 bit Systemuptime and Load: 17:57:49 up 73 days, 2:37, 2 users, load average: 8.57, 7.54, 4.66 CPU threads: 4 *** LIFE CYCLE STATUS *** Operating System is the current Debian stable version codenamed 'bookworm'! *** RASPBERRY THROTTLING *** Current issues: No throttling issues detected. Previously detected issues: No throttling issues detected. *** TIME AND TIMEZONES *** Local time: Wed 2025-05-07 17:57:49 CEST Universal time: Wed 2025-05-07 15:57:49 UTC RTC time: Wed 2025-05-07 15:57:49 Time zone: Europe/Berlin (CEST, +0200) System clock synchronized: yes NTP service: active RTC in local TZ: no *** Users and Groups *** User that called 'iob diag': pi HOME=/home/pi GROUPS=pi adm dialout cdrom sudo audio video plugdev games users input render netdev gpio i2c spi iobroker User that is running 'js-controller': iobroker HOME=/home/iobroker GROUPS=iobroker tty dialout audio video plugdev bluetooth gpio i2c *** DISPLAY-SERVER SETUP *** Display-Server: false Desktop: Terminal: tty *** MEMORY *** total used free shared buff/cache available Mem: 8.4G 2.5G 1.7G 3.2M 4.3G 5.9G Swap: 209M 4.2M 205M Total: 8.7G 2.5G 1.9G Active iob-Instances: 31 8052 M total memory 2379 M used memory 3130 M active memory 2722 M inactive memory 1652 M free memory 172 M buffer memory 3947 M swap cache 199 M total swap 4 M used swap 195 M free swap *** top - Table Of Processes *** top - 17:57:49 up 73 days, 2:37, 2 users, load average: 8.57, 7.54, 4.66 Tasks: 203 total, 1 running, 202 sleeping, 0 stopped, 0 zombie %Cpu(s): 0.0 us, 0.0 sy, 0.0 ni,100.0 id, 0.0 wa, 0.0 hi, 0.0 si, 0.0 st MiB Mem : 8052.2 total, 1652.7 free, 2379.8 used, 4119.6 buff/cache MiB Swap: 200.0 total, 196.0 free, 4.0 used. 5672.4 avail Mem *** FAILED SERVICES *** UNIT LOAD ACTIVE SUB DESCRIPTION 0 loaded units listed. *** DMESG CRITICAL ERRORS *** 15 CRITICAL ERRORS DETECTED! Check 'sudo dmesg --level=emerg,alert,crit -T' for details *** FILESYSTEM *** Filesystem Type Size Used Avail Use% Mounted on udev devtmpfs 3.9G 0 3.9G 0% /dev tmpfs tmpfs 806M 5.4M 800M 1% /run /dev/mmcblk0p2 ext4 59G 12G 44G 21% / tmpfs tmpfs 4.0G 0 4.0G 0% /dev/shm tmpfs tmpfs 5.0M 48K 5.0M 1% /run/lock /dev/sda1 exfat 29G 7.1G 22G 25% /mnt/usb0 /dev/mmcblk0p1 vfat 510M 66M 445M 13% /boot/firmware tmpfs tmpfs 806M 0 806M 0% /run/user/1000 Messages concerning ext4 filesystem in dmesg: [Sun Feb 23 14:20:43 2025] Kernel command line: reboot=w coherent_pool=1M 8250.nr_uarts=1 pci=pcie_bus_safe cgroup_disable=memory numa_policy=interleave smsc95xx.macaddr=2C:CF:67:2F:A6:31 vc_mem.mem_base=0x3fc00000 vc_mem.mem_size=0x40000000 console=tty1 console=ttyAMA10,115200 root=PARTUUID=70767922-02 rootfstype=ext4 fsck.repair=yes rootwait [Sun Feb 23 14:20:47 2025] EXT4-fs (mmcblk0p2): mounted filesystem 56f80fa2-e005-4cca-86e6-19da1069914d ro with ordered data mode. Quota mode: none. [Sun Feb 23 14:20:51 2025] EXT4-fs (mmcblk0p2): re-mounted 56f80fa2-e005-4cca-86e6-19da1069914d r/w. Quota mode: none. Show mounted filesystems: TARGET SOURCE FSTYPE OPTIONS / /dev/mmcblk0p2 ext4 rw,noatime |-/mnt/usb0 /dev/sda1 exfat rw,relatime,fmask=0000,dmask=0000,allow_utime=0022,iocharset=utf8,errors=remount-ro `-/boot/firmware /dev/mmcblk0p1 vfat rw,relatime,fmask=0022,dmask=0022,codepage=437,iocharset=ascii,shortname=mixed,errors=remount-ro Files in neuralgic directories: /var: 1.6G /var/ 976M /var/log/journal/61b86e93a3bd4c4e97ff911079b6083e 976M /var/log/journal 976M /var/log 209M /var/cache Archived and active journals take up 975.3M in the file system. /opt/iobroker/backups: 320M /opt/iobroker/backups/ /opt/iobroker/iobroker-data: 1.4G /opt/iobroker/iobroker-data/ 1.2G /opt/iobroker/iobroker-data/files 617M /opt/iobroker/iobroker-data/files/javascript.admin 560M /opt/iobroker/iobroker-data/files/javascript.admin/static 558M /opt/iobroker/iobroker-data/files/javascript.admin/static/js The five largest files in iobroker-data are: 45M /opt/iobroker/iobroker-data/objects.jsonl 38M /opt/iobroker/iobroker-data/files/iot.admin/static/js/main.d3d286bd.js.map 35M /opt/iobroker/iobroker-data/files/devices.admin/static/js/main.24f2bb56.js.map 27M /opt/iobroker/iobroker-data/files/tankerkoenig.admin/build/index.js.map 26M /opt/iobroker/iobroker-data/files/echarts/static/js/main.41cee985.js.map USB-Devices by-id: USB-Sticks - Avoid direct links to /dev/tty* in your adapter setups, please always prefer the links 'by-id': /dev/serial/by-id/usb-ITead_Sonoff_Zigbee_3.0_USB_Dongle_Plus_0867d5d6b78ded11959b02f6b86ce6f8-if00-port0 *** ZigBee Settings *** Your zigbee.0 COM-Port is matching 'by-id'. Very good! Zigbee Network Settings on your coordinator/in nvbackup are: zigbee.X Extended Pan ID: *** MASKED *** Pan ID: *** MASKED *** Channel: *** MASKED *** Network Key: *** MASKED *** To unmask the settings run 'iob diag --unmask' *** NodeJS-Installation *** /usr/bin/nodejs v20.19.1 /usr/bin/node v20.19.1 /usr/bin/npm 10.8.2 /usr/bin/npx 10.8.2 /usr/bin/corepack 0.31.0 nodejs: Installed: 20.19.1-1nodesource1 Candidate: 20.19.1-1nodesource1 Version table: *** 20.19.1-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 100 /var/lib/dpkg/status 20.19.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.18.3-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.18.2-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.18.1-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.18.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.17.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.16.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.15.1-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.15.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.14.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.13.1-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.13.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.12.2-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.12.1-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.12.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.11.1-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.11.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.10.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.9.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.8.1-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.8.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.7.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.6.1-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.6.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.5.1-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.5.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.4.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.3.1-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.3.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.2.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.1.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.0.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 18.19.0+dfsg-6~deb12u2 500 500 http://deb.debian.org/debian bookworm/main arm64 Packages 18.19.0+dfsg-6~deb12u1 500 500 http://deb.debian.org/debian-security bookworm-security/main arm64 Packages Temp directories causing deletion problem: 0 No problems detected Errors in npm tree: 0 No problems detected *** ioBroker-Installation *** ioBroker Status iobroker is running on this host. Objects type: jsonl States type: jsonl Hosts: Raspi58GB Raspi58GB (version: 7.0.6, hostname: Raspi58GB , alive, uptime: 617) Core adapters versions js-controller: 7.0.6 admin: 7.6.3 javascript: 8.8.3 nodejs modules from github: 0 Adapter State + system.adapter.admin.0 : admin : Raspi58GB - enabled, port: 8081, bind: 0.0.0.0, run as: admin + system.adapter.alexa2.0 : alexa2 : Raspi58GB - enabled system.adapter.alias-manager.0 : alias-manager : Raspi58GB - disabled + system.adapter.awtrix-light.0 : awtrix-light : Raspi58GB - enabled + system.adapter.backitup.0 : backitup : Raspi58GB - enabled + system.adapter.broadlink2.0 : broadlink2 : Raspi58GB - enabled system.adapter.devices.0 : devices : Raspi58GB - disabled + system.adapter.discovery.0 : discovery : Raspi58GB - enabled + system.adapter.doorbird.0 : doorbird : Raspi58GB - enabled + system.adapter.echarts.0 : echarts : Raspi58GB - enabled + system.adapter.followthesun.0 : followthesun : Raspi58GB - enabled + system.adapter.fritzdect.0 : fritzdect : Raspi58GB - enabled + system.adapter.frontier_silicon.0 : frontier_silicon : Raspi58GB - enabled system.adapter.frontier_silicon.1 : frontier_silicon : Raspi58GB - disabled system.adapter.frontier_silicon.2 : frontier_silicon : Raspi58GB - disabled system.adapter.frontier_silicon.3 : frontier_silicon : Raspi58GB - disabled + system.adapter.hm-rega.0 : hm-rega : Raspi58GB - enabled + system.adapter.hm-rpc.0 : hm-rpc : Raspi58GB - enabled, port: 0 + system.adapter.hm-rpc.1 : hm-rpc : Raspi58GB - enabled, port: 0 + system.adapter.influxdb.0 : influxdb : Raspi58GB - enabled, port: 8086 + system.adapter.iot.0 : iot : Raspi58GB - enabled + system.adapter.javascript.0 : javascript : Raspi58GB - enabled + system.adapter.mqtt.0 : mqtt : Raspi58GB - enabled, port: 1883, bind: 0.0.0.0 system.adapter.openweathermap.0 : openweathermap : Raspi58GB - enabled + system.adapter.rpi2.0 : rpi2 : Raspi58GB - enabled + system.adapter.shelly.0 : shelly : Raspi58GB - enabled, port: 1882, bind: 0.0.0.0 + system.adapter.shelly.1 : shelly : Raspi58GB - enabled, port: 1882, bind: 0.0.0.0 + system.adapter.simple-api.0 : simple-api : Raspi58GB - enabled, port: 8087, bind: 0.0.0.0, run as: admin + system.adapter.smartmeter.0 : smartmeter : Raspi58GB - enabled + system.adapter.tankerkoenig.0 : tankerkoenig : Raspi58GB - enabled + system.adapter.telegram.0 : telegram : Raspi58GB - enabled, port: 8443, bind: 0.0.0.0 + system.adapter.text2command.0 : text2command : Raspi58GB - enabled + system.adapter.tr-064.0 : tr-064 : Raspi58GB - enabled + system.adapter.vis-2.0 : vis-2 : Raspi58GB - enabled + system.adapter.web.0 : web : Raspi58GB - enabled, port: 8082, bind: 0.0.0.0, run as: admin system.adapter.yr.0 : yr : Raspi58GB - enabled + system.adapter.zigbee.0 : zigbee : Raspi58GB - enabled, port: /dev/serial/by-id/usb-ITead_Sonoff_Zigbee_3.0_USB_Dongle_Plus_0867d5d6b78ded11959b02f6b86ce6f8-if00-port0 + instance is alive Enabled adapters with bindings + system.adapter.admin.0 : admin : Raspi58GB - enabled, port: 8081, bind: 0.0.0.0, run as: admin + system.adapter.hm-rpc.0 : hm-rpc : Raspi58GB - enabled, port: 0 + system.adapter.hm-rpc.1 : hm-rpc : Raspi58GB - enabled, port: 0 + system.adapter.influxdb.0 : influxdb : Raspi58GB - enabled, port: 8086 + system.adapter.mqtt.0 : mqtt : Raspi58GB - enabled, port: 1883, bind: 0.0.0.0 + system.adapter.shelly.0 : shelly : Raspi58GB - enabled, port: 1882, bind: 0.0.0.0 + system.adapter.shelly.1 : shelly : Raspi58GB - enabled, port: 1882, bind: 0.0.0.0 + system.adapter.simple-api.0 : simple-api : Raspi58GB - enabled, port: 8087, bind: 0.0.0.0, run as: admin + system.adapter.telegram.0 : telegram : Raspi58GB - enabled, port: 8443, bind: 0.0.0.0 + system.adapter.web.0 : web : Raspi58GB - enabled, port: 8082, bind: 0.0.0.0, run as: admin + system.adapter.zigbee.0 : zigbee : Raspi58GB - enabled, port: /dev/serial/by-id/usb-ITead_Sonoff_Zigbee_3.0_USB_Dongle_Plus_0867d5d6b78ded11959b02f6b86ce6f8-if00-port0 ioBroker-Repositories ┌─────────┬──────────┬─────────────────────────────────────────────────────────┬──────────────┐ │ (index) │ name │ url │ auto upgrade │ ├─────────┼──────────┼─────────────────────────────────────────────────────────┼──────────────┤ │ 0 │ 'stable' │ 'http://download.iobroker.net/sources-dist.json' │ false │ │ 1 │ 'beta' │ 'http://download.iobroker.net/sources-dist-latest.json' │ false │ └─────────┴──────────┴─────────────────────────────────────────────────────────┴──────────────┘ Active repo(s): stable Upgrade policy: none Installed ioBroker-Adapters Used repository: stable Adapter "admin" : 7.6.3 , installed 7.6.3 Adapter "alexa2" : 3.26.5 , installed 3.26.5 Adapter "alias-manager": 2.0.0 , installed 2.0.0 Adapter "awtrix-light" : 1.7.0 , installed 1.7.0 Adapter "backitup" : 3.0.31 , installed 3.0.31 Adapter "broadlink2" : 2.3.0 , installed 2.3.0 Adapter "devices" : 1.1.5 , installed 1.1.5 Adapter "discovery" : 5.0.0 , installed 5.0.0 Adapter "doorbird" : 3.0.0 , installed 3.0.0 Adapter "echarts" : 1.9.2 , installed 1.9.2 Adapter "followthesun" : 0.5.2 , installed 0.5.2 Adapter "fritzdect" : 2.6.1 , installed 2.6.1 Adapter "frontier_silicon": 0.4.0 , installed 0.4.0 Adapter "hm-rega" : 5.1.0 , installed 5.1.0 Adapter "hm-rpc" : 2.0.2 , installed 2.0.2 Adapter "influxdb" : 4.0.2 , installed 4.0.2 Adapter "iot" : 3.3.0 , installed 3.3.0 Adapter "javascript" : 8.8.3 , installed 8.8.3 Controller "js-controller": 7.0.6 , installed 7.0.6 Adapter "mqtt" : 6.1.2 , installed 6.1.2 Adapter "openweathermap": 1.1.2 , installed 1.1.2 Adapter "rpi2" : 2.4.0 , installed 2.4.0 Adapter "shelly" : 9.2.0 , installed 9.2.0 Adapter "simple-api" : 2.8.0 , installed 2.8.0 Adapter "smartmeter" : 3.4.0 , installed 3.4.0 Adapter "socketio" : 6.7.1 , installed 7.0.8 Adapter "tankerkoenig" : 3.4.0 , installed 3.4.0 Adapter "telegram" : 4.1.0 , installed 4.1.0 Adapter "text2command" : 3.0.3 , installed 3.0.3 Adapter "tr-064" : 4.3.0 , installed 4.3.0 Adapter "vis-2" : 2.9.64 , installed 2.9.64 Adapter "web" : 7.0.8 , installed 7.0.8 Adapter "ws" : 2.6.2 , installed 3.0.19 Adapter "yr" : 5.3.0 , installed 5.3.0 Adapter "zigbee" : 2.0.5 , installed 2.0.5 Objects and States Please stand by - This may take a while Objects: 13162 States: 10572 *** OS-Repositories and Updates *** Hit:1 http://archive.raspberrypi.com/debian bookworm InRelease Hit:2 http://deb.debian.org/debian bookworm InRelease Hit:3 https://repos.influxdata.com/debian stable InRelease Hit:4 http://deb.debian.org/debian-security bookworm-security InRelease Hit:5 http://deb.debian.org/debian bookworm-updates InRelease Hit:6 https://deb.nodesource.com/node_20.x nodistro InRelease Hit:7 https://repo.mosquitto.org/debian bookworm InRelease Reading package lists... Pending Updates: 0 *** Listening Ports *** Active Internet connections (only servers) Proto Recv-Q Send-Q Local Address Foreign Address State User Inode PID/Program name tcp 0 0 192.168.178.57:8100 0.0.0.0:* LISTEN 1001 87504063 2716534/io.doorbird tcp 0 0 0.0.0.0:1883 0.0.0.0:* LISTEN 106 3863 805/mosquitto tcp 0 0 0.0.0.0:1882 0.0.0.0:* LISTEN 1001 87503125 2716414/io.shelly.1 tcp 0 0 192.168.178.57:2001 0.0.0.0:* LISTEN 1001 87501406 2716309/io.hm-rpc.1 tcp 0 0 192.168.178.57:42010 0.0.0.0:* LISTEN 1001 87502285 2716294/io.hm-rpc.0 tcp 0 0 0.0.0.0:9001 0.0.0.0:* LISTEN 1001 87499606 2716080/iobroker.js tcp 0 0 0.0.0.0:9000 0.0.0.0:* LISTEN 1001 87499611 2716080/iobroker.js tcp 0 0 0.0.0.0:22 0.0.0.0:* LISTEN 0 6088 809/sshd: /usr/sbin tcp6 0 0 :::8081 :::* LISTEN 1001 87501150 2716101/io.admin.0 tcp6 0 0 :::8082 :::* LISTEN 1001 87502788 2716693/io.web.0 tcp6 0 0 :::8087 :::* LISTEN 1001 87502670 2716611/io.simple-a tcp6 0 0 :::8086 :::* LISTEN 999 9328 860/influxd tcp6 0 0 :::1883 :::* LISTEN 106 3864 805/mosquitto tcp6 0 0 :::22 :::* LISTEN 0 6090 809/sshd: /usr/sbin udp 0 0 0.0.0.0:5683 0.0.0.0:* 1001 87503085 2716395/io.shelly.0 udp 0 0 0.0.0.0:58972 0.0.0.0:* 1001 87500552 2716239/io.broadlin udp 0 0 0.0.0.0:38548 0.0.0.0:* 1001 87500551 2716239/io.broadlin udp 0 0 0.0.0.0:34567 0.0.0.0:* 1001 87502211 2716239/io.broadlin udp 0 0 0.0.0.0:55464 0.0.0.0:* 1001 87502212 2716239/io.broadlin udp 0 0 0.0.0.0:15001 0.0.0.0:* 1001 87502942 2716239/io.broadlin udp 0 0 0.0.0.0:39665 0.0.0.0:* 1001 87500549 2716239/io.broadlin udp 0 0 0.0.0.0:47959 0.0.0.0:* 1001 87502209 2716239/io.broadlin udp 0 0 0.0.0.0:39974 0.0.0.0:* 1001 87500550 2716239/io.broadlin udp 0 0 0.0.0.0:48451 0.0.0.0:* 1001 87502214 2716239/io.broadlin udp 0 0 0.0.0.0:48497 0.0.0.0:* 104 5966 691/avahi-daemon: r udp 0 0 0.0.0.0:44688 0.0.0.0:* 1001 87500565 2716239/io.broadlin udp 0 0 0.0.0.0:33290 0.0.0.0:* 1001 87502213 2716239/io.broadlin udp 0 0 0.0.0.0:49753 0.0.0.0:* 1001 87502210 2716239/io.broadlin udp 0 0 0.0.0.0:5353 0.0.0.0:* 104 5964 691/avahi-daemon: r udp6 0 0 :::39826 :::* 104 5967 691/avahi-daemon: r udp6 0 0 fe80::2ca:bf0f:5188:546 :::* 0 54293794 1668473/NetworkMana udp6 0 0 :::5353 :::* 104 5965 691/avahi-daemon: r *** Log File - Last 25 Lines *** 2025-05-07 17:50:12.936 - info: zigbee.0 (2716711) cleaned everything up... 2025-05-07 17:50:12.937 - info: zigbee.0 (2716711) local config saved 2025-05-07 17:50:12.938 - info: zigbee.0 (2716711) Saved local configuration data 2025-05-07 17:50:12.939 - info: zigbee.0 (2716711) terminating 2025-05-07 17:50:12.940 - info: zigbee.0 (2716711) Terminated (ADAPTER_REQUESTED_TERMINATION): Without reason 2025-05-07 17:50:12.987 - error: zigbee.0 (2716711) Failed to open the network: TypeError: Cannot read properties of undefined (reading 'permitJoin') at Controller.permitJoin (/opt/iobroker/node_modules/zigbee-herdsman/src/controller/controller.ts:315:35) at ZigbeeController.permitJoin (/opt/iobroker/node_modules/iobroker.zigbee/lib/zigbeecontroller.js:659:33) at ZigbeeController.stop (/opt/iobroker/node_modules/iobroker.zigbee/lib/zigbeecontroller.js:634:24) at processTicksAndRejections (node:internal/process/task_queues:95:5) at Zigbee.onUnload (/opt/iobroker/node_modules/iobroker.zigbee/main.js:1037:17) 2025-05-07 17:50:12.988 - warn: zigbee.0 (2716711) Failed to stop zigbee during startup 2025-05-07 17:50:12.988 - info: zigbee.0 (2716711) terminating 2025-05-07 17:50:13.008 - info: host.Raspi58GB stopInstance system.adapter.zigbee.0 send kill signal 2025-05-07 17:50:13.441 - info: zigbee.0 (2716711) terminating 2025-05-07 17:50:13.485 - info: host.Raspi58GB instance system.adapter.zigbee.0 terminated with code 11 (ADAPTER_REQUESTED_TERMINATION) 2025-05-07 17:50:16.818 - info: host.Raspi58GB instance system.adapter.zigbee.0 in version "2.0.5" started with pid 2716727 2025-05-07 17:50:17.959 - info: zigbee.0 (2716727) starting. Version 2.0.5 in /opt/iobroker/node_modules/iobroker.zigbee, node: v20.19.1, js-controller: 7.0.6 2025-05-07 17:50:17.969 - info: zigbee.0 (2716727) init localConfig 2025-05-07 17:50:17.972 - info: zigbee.0 (2716727) --> transmitPower : normal 2025-05-07 17:50:17.977 - info: zigbee.0 (2716727) --- creating device debug --- 2025-05-07 17:50:17.978 - info: zigbee.0 (2716727) Starting Adapter npm ... 2025-05-07 17:50:17.994 - info: zigbee.0 (2716727) Installed Version: iobroker.zigbee@2.0.5 (Converters 23.6.0 Herdsman 3.5.2) 2025-05-07 17:50:17.995 - info: zigbee.0 (2716727) Starting Zigbee-Herdsman 2025-05-07 17:53:36.342 - info: smartmeter.0 (2716443) Received 13 values, 6 updatedSorry nein das hier ist das diag:Script v.2025-02-23 *** BASE SYSTEM *** Static hostname: Raspi58GB Icon name: computer Operating System: Debian GNU/Linux 12 (bookworm) Kernel: Linux 6.6.74+rpt-rpi-2712 Architecture: arm64 OS is similar to: Model : Raspberry Pi 5 Model B Rev 1.0 Docker : false Virtualization : none Kernel : aarch64 Userland : 64 bit Systemuptime and Load: 17:57:49 up 73 days, 2:37, 2 users, load average: 8.57, 7.54, 4.66 CPU threads: 4 *** LIFE CYCLE STATUS *** Operating System is the current Debian stable version codenamed 'bookworm'! *** RASPBERRY THROTTLING *** Current issues: No throttling issues detected. Previously detected issues: No throttling issues detected. *** TIME AND TIMEZONES *** Local time: Wed 2025-05-07 17:57:49 CEST Universal time: Wed 2025-05-07 15:57:49 UTC RTC time: Wed 2025-05-07 15:57:49 Time zone: Europe/Berlin (CEST, +0200) System clock synchronized: yes NTP service: active RTC in local TZ: no *** Users and Groups *** User that called 'iob diag': pi HOME=/home/pi GROUPS=pi adm dialout cdrom sudo audio video plugdev games users input render netdev gpio i2c spi iobroker User that is running 'js-controller': iobroker HOME=/home/iobroker GROUPS=iobroker tty dialout audio video plugdev bluetooth gpio i2c *** DISPLAY-SERVER SETUP *** Display-Server: false Desktop: Terminal: tty *** MEMORY *** total used free shared buff/cache available Mem: 8.4G 2.5G 1.7G 3.2M 4.3G 5.9G Swap: 209M 4.2M 205M Total: 8.7G 2.5G 1.9G Active iob-Instances: 31 8052 M total memory 2379 M used memory 3130 M active memory 2722 M inactive memory 1652 M free memory 172 M buffer memory 3947 M swap cache 199 M total swap 4 M used swap 195 M free swap *** top - Table Of Processes *** top - 17:57:49 up 73 days, 2:37, 2 users, load average: 8.57, 7.54, 4.66 Tasks: 203 total, 1 running, 202 sleeping, 0 stopped, 0 zombie %Cpu(s): 0.0 us, 0.0 sy, 0.0 ni,100.0 id, 0.0 wa, 0.0 hi, 0.0 si, 0.0 st MiB Mem : 8052.2 total, 1652.7 free, 2379.8 used, 4119.6 buff/cache MiB Swap: 200.0 total, 196.0 free, 4.0 used. 5672.4 avail Mem *** FAILED SERVICES *** UNIT LOAD ACTIVE SUB DESCRIPTION 0 loaded units listed. *** DMESG CRITICAL ERRORS *** 15 CRITICAL ERRORS DETECTED! Check 'sudo dmesg --level=emerg,alert,crit -T' for details *** FILESYSTEM *** Filesystem Type Size Used Avail Use% Mounted on udev devtmpfs 3.9G 0 3.9G 0% /dev tmpfs tmpfs 806M 5.4M 800M 1% /run /dev/mmcblk0p2 ext4 59G 12G 44G 21% / tmpfs tmpfs 4.0G 0 4.0G 0% /dev/shm tmpfs tmpfs 5.0M 48K 5.0M 1% /run/lock /dev/sda1 exfat 29G 7.1G 22G 25% /mnt/usb0 /dev/mmcblk0p1 vfat 510M 66M 445M 13% /boot/firmware tmpfs tmpfs 806M 0 806M 0% /run/user/1000 Messages concerning ext4 filesystem in dmesg: [Sun Feb 23 14:20:43 2025] Kernel command line: reboot=w coherent_pool=1M 8250.nr_uarts=1 pci=pcie_bus_safe cgroup_disable=memory numa_policy=interleave smsc95xx.macaddr=2C:CF:67:2F:A6:31 vc_mem.mem_base=0x3fc00000 vc_mem.mem_size=0x40000000 console=tty1 console=ttyAMA10,115200 root=PARTUUID=70767922-02 rootfstype=ext4 fsck.repair=yes rootwait [Sun Feb 23 14:20:47 2025] EXT4-fs (mmcblk0p2): mounted filesystem 56f80fa2-e005-4cca-86e6-19da1069914d ro with ordered data mode. Quota mode: none. [Sun Feb 23 14:20:51 2025] EXT4-fs (mmcblk0p2): re-mounted 56f80fa2-e005-4cca-86e6-19da1069914d r/w. Quota mode: none. Show mounted filesystems: TARGET SOURCE FSTYPE OPTIONS / /dev/mmcblk0p2 ext4 rw,noatime |-/mnt/usb0 /dev/sda1 exfat rw,relatime,fmask=0000,dmask=0000,allow_utime=0022,iocharset=utf8,errors=remount-ro `-/boot/firmware /dev/mmcblk0p1 vfat rw,relatime,fmask=0022,dmask=0022,codepage=437,iocharset=ascii,shortname=mixed,errors=remount-ro Files in neuralgic directories: /var: 1.6G /var/ 976M /var/log/journal/61b86e93a3bd4c4e97ff911079b6083e 976M /var/log/journal 976M /var/log 209M /var/cache Archived and active journals take up 975.3M in the file system. /opt/iobroker/backups: 320M /opt/iobroker/backups/ /opt/iobroker/iobroker-data: 1.4G /opt/iobroker/iobroker-data/ 1.2G /opt/iobroker/iobroker-data/files 617M /opt/iobroker/iobroker-data/files/javascript.admin 560M /opt/iobroker/iobroker-data/files/javascript.admin/static 558M /opt/iobroker/iobroker-data/files/javascript.admin/static/js The five largest files in iobroker-data are: 45M /opt/iobroker/iobroker-data/objects.jsonl 38M /opt/iobroker/iobroker-data/files/iot.admin/static/js/main.d3d286bd.js.map 35M /opt/iobroker/iobroker-data/files/devices.admin/static/js/main.24f2bb56.js.map 27M /opt/iobroker/iobroker-data/files/tankerkoenig.admin/build/index.js.map 26M /opt/iobroker/iobroker-data/files/echarts/static/js/main.41cee985.js.map USB-Devices by-id: USB-Sticks - Avoid direct links to /dev/tty* in your adapter setups, please always prefer the links 'by-id': /dev/serial/by-id/usb-ITead_Sonoff_Zigbee_3.0_USB_Dongle_Plus_0867d5d6b78ded11959b02f6b86ce6f8-if00-port0 *** ZigBee Settings *** Your zigbee.0 COM-Port is matching 'by-id'. Very good! Zigbee Network Settings on your coordinator/in nvbackup are: zigbee.X Extended Pan ID: *** MASKED *** Pan ID: *** MASKED *** Channel: *** MASKED *** Network Key: *** MASKED *** To unmask the settings run 'iob diag --unmask' *** NodeJS-Installation *** /usr/bin/nodejs v20.19.1 /usr/bin/node v20.19.1 /usr/bin/npm 10.8.2 /usr/bin/npx 10.8.2 /usr/bin/corepack 0.31.0 nodejs: Installed: 20.19.1-1nodesource1 Candidate: 20.19.1-1nodesource1 Version table: *** 20.19.1-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 100 /var/lib/dpkg/status 20.19.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.18.3-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.18.2-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.18.1-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.18.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.17.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.16.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.15.1-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.15.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.14.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.13.1-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.13.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.12.2-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.12.1-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.12.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.11.1-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.11.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.10.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.9.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.8.1-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.8.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.7.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.6.1-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.6.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.5.1-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.5.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.4.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.3.1-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.3.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.2.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.1.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.0.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 18.19.0+dfsg-6~deb12u2 500 500 http://deb.debian.org/debian bookworm/main arm64 Packages 18.19.0+dfsg-6~deb12u1 500 500 http://deb.debian.org/debian-security bookworm-security/main arm64 Packages Temp directories causing deletion problem: 0 No problems detected Errors in npm tree: 0 No problems detected *** ioBroker-Installation *** ioBroker Status iobroker is running on this host. Objects type: jsonl States type: jsonl Hosts: Raspi58GB Raspi58GB (version: 7.0.6, hostname: Raspi58GB , alive, uptime: 617) Core adapters versions js-controller: 7.0.6 admin: 7.6.3 javascript: 8.8.3 nodejs modules from github: 0 Adapter State + system.adapter.admin.0 : admin : Raspi58GB - enabled, port: 8081, bind: 0.0.0.0, run as: admin + system.adapter.alexa2.0 : alexa2 : Raspi58GB - enabled system.adapter.alias-manager.0 : alias-manager : Raspi58GB - disabled + system.adapter.awtrix-light.0 : awtrix-light : Raspi58GB - enabled + system.adapter.backitup.0 : backitup : Raspi58GB - enabled + system.adapter.broadlink2.0 : broadlink2 : Raspi58GB - enabled system.adapter.devices.0 : devices : Raspi58GB - disabled + system.adapter.discovery.0 : discovery : Raspi58GB - enabled + system.adapter.doorbird.0 : doorbird : Raspi58GB - enabled + system.adapter.echarts.0 : echarts : Raspi58GB - enabled + system.adapter.followthesun.0 : followthesun : Raspi58GB - enabled + system.adapter.fritzdect.0 : fritzdect : Raspi58GB - enabled + system.adapter.frontier_silicon.0 : frontier_silicon : Raspi58GB - enabled system.adapter.frontier_silicon.1 : frontier_silicon : Raspi58GB - disabled system.adapter.frontier_silicon.2 : frontier_silicon : Raspi58GB - disabled system.adapter.frontier_silicon.3 : frontier_silicon : Raspi58GB - disabled + system.adapter.hm-rega.0 : hm-rega : Raspi58GB - enabled + system.adapter.hm-rpc.0 : hm-rpc : Raspi58GB - enabled, port: 0 + system.adapter.hm-rpc.1 : hm-rpc : Raspi58GB - enabled, port: 0 + system.adapter.influxdb.0 : influxdb : Raspi58GB - enabled, port: 8086 + system.adapter.iot.0 : iot : Raspi58GB - enabled + system.adapter.javascript.0 : javascript : Raspi58GB - enabled + system.adapter.mqtt.0 : mqtt : Raspi58GB - enabled, port: 1883, bind: 0.0.0.0 system.adapter.openweathermap.0 : openweathermap : Raspi58GB - enabled + system.adapter.rpi2.0 : rpi2 : Raspi58GB - enabled + system.adapter.shelly.0 : shelly : Raspi58GB - enabled, port: 1882, bind: 0.0.0.0 + system.adapter.shelly.1 : shelly : Raspi58GB - enabled, port: 1882, bind: 0.0.0.0 + system.adapter.simple-api.0 : simple-api : Raspi58GB - enabled, port: 8087, bind: 0.0.0.0, run as: admin + system.adapter.smartmeter.0 : smartmeter : Raspi58GB - enabled + system.adapter.tankerkoenig.0 : tankerkoenig : Raspi58GB - enabled + system.adapter.telegram.0 : telegram : Raspi58GB - enabled, port: 8443, bind: 0.0.0.0 + system.adapter.text2command.0 : text2command : Raspi58GB - enabled + system.adapter.tr-064.0 : tr-064 : Raspi58GB - enabled + system.adapter.vis-2.0 : vis-2 : Raspi58GB - enabled + system.adapter.web.0 : web : Raspi58GB - enabled, port: 8082, bind: 0.0.0.0, run as: admin system.adapter.yr.0 : yr : Raspi58GB - enabled + system.adapter.zigbee.0 : zigbee : Raspi58GB - enabled, port: /dev/serial/by-id/usb-ITead_Sonoff_Zigbee_3.0_USB_Dongle_Plus_0867d5d6b78ded11959b02f6b86ce6f8-if00-port0 + instance is alive Enabled adapters with bindings + system.adapter.admin.0 : admin : Raspi58GB - enabled, port: 8081, bind: 0.0.0.0, run as: admin + system.adapter.hm-rpc.0 : hm-rpc : Raspi58GB - enabled, port: 0 + system.adapter.hm-rpc.1 : hm-rpc : Raspi58GB - enabled, port: 0 + system.adapter.influxdb.0 : influxdb : Raspi58GB - enabled, port: 8086 + system.adapter.mqtt.0 : mqtt : Raspi58GB - enabled, port: 1883, bind: 0.0.0.0 + system.adapter.shelly.0 : shelly : Raspi58GB - enabled, port: 1882, bind: 0.0.0.0 + system.adapter.shelly.1 : shelly : Raspi58GB - enabled, port: 1882, bind: 0.0.0.0 + system.adapter.simple-api.0 : simple-api : Raspi58GB - enabled, port: 8087, bind: 0.0.0.0, run as: admin + system.adapter.telegram.0 : telegram : Raspi58GB - enabled, port: 8443, bind: 0.0.0.0 + system.adapter.web.0 : web : Raspi58GB - enabled, port: 8082, bind: 0.0.0.0, run as: admin + system.adapter.zigbee.0 : zigbee : Raspi58GB - enabled, port: /dev/serial/by-id/usb-ITead_Sonoff_Zigbee_3.0_USB_Dongle_Plus_0867d5d6b78ded11959b02f6b86ce6f8-if00-port0 ioBroker-Repositories ┌─────────┬──────────┬─────────────────────────────────────────────────────────┬──────────────┐ │ (index) │ name │ url │ auto upgrade │ ├─────────┼──────────┼─────────────────────────────────────────────────────────┼──────────────┤ │ 0 │ 'stable' │ 'http://download.iobroker.net/sources-dist.json' │ false │ │ 1 │ 'beta' │ 'http://download.iobroker.net/sources-dist-latest.json' │ false │ └─────────┴──────────┴─────────────────────────────────────────────────────────┴──────────────┘ Active repo(s): stable Upgrade policy: none Installed ioBroker-Adapters Used repository: stable Adapter "admin" : 7.6.3 , installed 7.6.3 Adapter "alexa2" : 3.26.5 , installed 3.26.5 Adapter "alias-manager": 2.0.0 , installed 2.0.0 Adapter "awtrix-light" : 1.7.0 , installed 1.7.0 Adapter "backitup" : 3.0.31 , installed 3.0.31 Adapter "broadlink2" : 2.3.0 , installed 2.3.0 Adapter "devices" : 1.1.5 , installed 1.1.5 Adapter "discovery" : 5.0.0 , installed 5.0.0 Adapter "doorbird" : 3.0.0 , installed 3.0.0 Adapter "echarts" : 1.9.2 , installed 1.9.2 Adapter "followthesun" : 0.5.2 , installed 0.5.2 Adapter "fritzdect" : 2.6.1 , installed 2.6.1 Adapter "frontier_silicon": 0.4.0 , installed 0.4.0 Adapter "hm-rega" : 5.1.0 , installed 5.1.0 Adapter "hm-rpc" : 2.0.2 , installed 2.0.2 Adapter "influxdb" : 4.0.2 , installed 4.0.2 Adapter "iot" : 3.3.0 , installed 3.3.0 Adapter "javascript" : 8.8.3 , installed 8.8.3 Controller "js-controller": 7.0.6 , installed 7.0.6 Adapter "mqtt" : 6.1.2 , installed 6.1.2 Adapter "openweathermap": 1.1.2 , installed 1.1.2 Adapter "rpi2" : 2.4.0 , installed 2.4.0 Adapter "shelly" : 9.2.0 , installed 9.2.0 Adapter "simple-api" : 2.8.0 , installed 2.8.0 Adapter "smartmeter" : 3.4.0 , installed 3.4.0 Adapter "socketio" : 6.7.1 , installed 7.0.8 Adapter "tankerkoenig" : 3.4.0 , installed 3.4.0 Adapter "telegram" : 4.1.0 , installed 4.1.0 Adapter "text2command" : 3.0.3 , installed 3.0.3 Adapter "tr-064" : 4.3.0 , installed 4.3.0 Adapter "vis-2" : 2.9.64 , installed 2.9.64 Adapter "web" : 7.0.8 , installed 7.0.8 Adapter "ws" : 2.6.2 , installed 3.0.19 Adapter "yr" : 5.3.0 , installed 5.3.0 Adapter "zigbee" : 2.0.5 , installed 2.0.5 Objects and States Please stand by - This may take a while Objects: 13162 States: 10572 *** OS-Repositories and Updates *** Hit:1 http://archive.raspberrypi.com/debian bookworm InRelease Hit:2 http://deb.debian.org/debian bookworm InRelease Hit:3 https://repos.influxdata.com/debian stable InRelease Hit:4 http://deb.debian.org/debian-security bookworm-security InRelease Hit:5 http://deb.debian.org/debian bookworm-updates InRelease Hit:6 https://deb.nodesource.com/node_20.x nodistro InRelease Hit:7 https://repo.mosquitto.org/debian bookworm InRelease Reading package lists... Pending Updates: 0 *** Listening Ports *** Active Internet connections (only servers) Proto Recv-Q Send-Q Local Address Foreign Address State User Inode PID/Program name tcp 0 0 192.168.178.57:8100 0.0.0.0:* LISTEN 1001 87504063 2716534/io.doorbird tcp 0 0 0.0.0.0:1883 0.0.0.0:* LISTEN 106 3863 805/mosquitto tcp 0 0 0.0.0.0:1882 0.0.0.0:* LISTEN 1001 87503125 2716414/io.shelly.1 tcp 0 0 192.168.178.57:2001 0.0.0.0:* LISTEN 1001 87501406 2716309/io.hm-rpc.1 tcp 0 0 192.168.178.57:42010 0.0.0.0:* LISTEN 1001 87502285 2716294/io.hm-rpc.0 tcp 0 0 0.0.0.0:9001 0.0.0.0:* LISTEN 1001 87499606 2716080/iobroker.js tcp 0 0 0.0.0.0:9000 0.0.0.0:* LISTEN 1001 87499611 2716080/iobroker.js tcp 0 0 0.0.0.0:22 0.0.0.0:* LISTEN 0 6088 809/sshd: /usr/sbin tcp6 0 0 :::8081 :::* LISTEN 1001 87501150 2716101/io.admin.0 tcp6 0 0 :::8082 :::* LISTEN 1001 87502788 2716693/io.web.0 tcp6 0 0 :::8087 :::* LISTEN 1001 87502670 2716611/io.simple-a tcp6 0 0 :::8086 :::* LISTEN 999 9328 860/influxd tcp6 0 0 :::1883 :::* LISTEN 106 3864 805/mosquitto tcp6 0 0 :::22 :::* LISTEN 0 6090 809/sshd: /usr/sbin udp 0 0 0.0.0.0:5683 0.0.0.0:* 1001 87503085 2716395/io.shelly.0 udp 0 0 0.0.0.0:58972 0.0.0.0:* 1001 87500552 2716239/io.broadlin udp 0 0 0.0.0.0:38548 0.0.0.0:* 1001 87500551 2716239/io.broadlin udp 0 0 0.0.0.0:34567 0.0.0.0:* 1001 87502211 2716239/io.broadlin udp 0 0 0.0.0.0:55464 0.0.0.0:* 1001 87502212 2716239/io.broadlin udp 0 0 0.0.0.0:15001 0.0.0.0:* 1001 87502942 2716239/io.broadlin udp 0 0 0.0.0.0:39665 0.0.0.0:* 1001 87500549 2716239/io.broadlin udp 0 0 0.0.0.0:47959 0.0.0.0:* 1001 87502209 2716239/io.broadlin udp 0 0 0.0.0.0:39974 0.0.0.0:* 1001 87500550 2716239/io.broadlin udp 0 0 0.0.0.0:48451 0.0.0.0:* 1001 87502214 2716239/io.broadlin udp 0 0 0.0.0.0:48497 0.0.0.0:* 104 5966 691/avahi-daemon: r udp 0 0 0.0.0.0:44688 0.0.0.0:* 1001 87500565 2716239/io.broadlin udp 0 0 0.0.0.0:33290 0.0.0.0:* 1001 87502213 2716239/io.broadlin udp 0 0 0.0.0.0:49753 0.0.0.0:* 1001 87502210 2716239/io.broadlin udp 0 0 0.0.0.0:5353 0.0.0.0:* 104 5964 691/avahi-daemon: r udp6 0 0 :::39826 :::* 104 5967 691/avahi-daemon: r udp6 0 0 fe80::2ca:bf0f:5188:546 :::* 0 54293794 1668473/NetworkMana udp6 0 0 :::5353 :::* 104 5965 691/avahi-daemon: r *** Log File - Last 25 Lines *** 2025-05-07 17:50:12.936 - info: zigbee.0 (2716711) cleaned everything up... 2025-05-07 17:50:12.937 - info: zigbee.0 (2716711) local config saved 2025-05-07 17:50:12.938 - info: zigbee.0 (2716711) Saved local configuration data 2025-05-07 17:50:12.939 - info: zigbee.0 (2716711) terminating 2025-05-07 17:50:12.940 - info: zigbee.0 (2716711) Terminated (ADAPTER_REQUESTED_TERMINATION): Without reason 2025-05-07 17:50:12.987 - error: zigbee.0 (2716711) Failed to open the network: TypeError: Cannot read properties of undefined (reading 'permitJoin') at Controller.permitJoin (/opt/iobroker/node_modules/zigbee-herdsman/src/controller/controller.ts:315:35) at ZigbeeController.permitJoin (/opt/iobroker/node_modules/iobroker.zigbee/lib/zigbeecontroller.js:659:33) at ZigbeeController.stop (/opt/iobroker/node_modules/iobroker.zigbee/lib/zigbeecontroller.js:634:24) at processTicksAndRejections (node:internal/process/task_queues:95:5) at Zigbee.onUnload (/opt/iobroker/node_modules/iobroker.zigbee/main.js:1037:17) 2025-05-07 17:50:12.988 - warn: zigbee.0 (2716711) Failed to stop zigbee during startup 2025-05-07 17:50:12.988 - info: zigbee.0 (2716711) terminating 2025-05-07 17:50:13.008 - info: host.Raspi58GB stopInstance system.adapter.zigbee.0 send kill signal 2025-05-07 17:50:13.441 - info: zigbee.0 (2716711) terminating 2025-05-07 17:50:13.485 - info: host.Raspi58GB instance system.adapter.zigbee.0 terminated with code 11 (ADAPTER_REQUESTED_TERMINATION) 2025-05-07 17:50:16.818 - info: host.Raspi58GB instance system.adapter.zigbee.0 in version "2.0.5" started with pid 2716727 2025-05-07 17:50:17.959 - info: zigbee.0 (2716727) starting. Version 2.0.5 in /opt/iobroker/node_modules/iobroker.zigbee, node: v20.19.1, js-controller: 7.0.6 2025-05-07 17:50:17.969 - info: zigbee.0 (2716727) init localConfig 2025-05-07 17:50:17.972 - info: zigbee.0 (2716727) --> transmitPower : normal 2025-05-07 17:50:17.977 - info: zigbee.0 (2716727) --- creating device debug --- 2025-05-07 17:50:17.978 - info: zigbee.0 (2716727) Starting Adapter npm ... 2025-05-07 17:50:17.994 - info: zigbee.0 (2716727) Installed Version: iobroker.zigbee@2.0.5 (Converters 23.6.0 Herdsman 3.5.2) 2025-05-07 17:50:17.995 - info: zigbee.0 (2716727) Starting Zigbee-Herdsman 2025-05-07 17:53:36.342 - info: smartmeter.0 (2716443) Received 13 values, 6 updated -
@searcher57 sagte in FritzBox Zigbee Antenne in ioBroker einbinden?:
Hier das Protokoll:
bitte keinen Screenshot!
als Text in code-tags posten. -
@homoran said in FritzBox Zigbee Antenne in ioBroker einbinden?:
@searcher57 sagte in FritzBox Zigbee Antenne in ioBroker einbinden?:
Hier das Protokoll:
bitte keinen Screenshot!
als Text in code-tags posten.Bitte erkläre das!
