FritzBox Zigbee Antenne in ioBroker einbinden?
-
@searcher57 sagte in FritzBox Zigbee Antenne in ioBroker einbinden?:
Ich will damit erreichen, dass der Zigbee USB Stick überflüssig wird, der ja die Zigbee-Komponenten über eine serielle Schnittstelle in den Raspi 5 einbindet. Diese will ich aber für den Smartmeter-Adapter nutzen über den ich die Stromdaten erhalte.
Du schreibst überraschendes.
Einen USB-Zigbee Adapter wie den Conbee (https://phoscon.de/de/conbee2/) betreibt man an der USB-Buchse und das hat m.E. nichts mit "seriell" zu tun bzw. würde etwas einschränken.Wenn Du ein Smartmeter auslesen willst, dann kann man das über sowas wie einen Wattwächter (https://www.amazon.de/WattWächter-Stromzähler-SmartMeter-vorinstalliert-Volkszähler/dp/B0DDHPZQPX) tun, der sich per WLAN und MQTT verbindet.
Dann sind immer noch 3 USB-Buchsen für irgendwas frei verfügbar am Raspi.
Und bzgl. des AVM Zigbee Adapters würde ich immer rest prüfen, welche Geräte er wie gut unterstützt. Nicht jeder Zigbee-Empfänger kann mit jedem Gerät. Und manche Empfänger sind schwach supported, weil dieser Support aufwendig ist.
-
@homoran said in FritzBox Zigbee Antenne in ioBroker einbinden?:
@searcher57 ein RasPi5 hat doch mehr als 1 USB Buchse!
Das Problem habe ich schon mehrfach erwähnt. Ich lese den Stromzähler über die GPIO Schnittstelle aus und damit wird die Möglichkeit des Zigbee Adapters blockiert.
-
@searcher57 sagte in FritzBox Zigbee Antenne in ioBroker einbinden?:
@homoran said in FritzBox Zigbee Antenne in ioBroker einbinden?:
@searcher57 ein RasPi5 hat doch mehr als 1 USB Buchse!
Das Problem habe ich schon mehrfach erwähnt. Ich lese den Stromzähler über die GPIO Schnittstelle aus und damit wird die Möglichkeit des Zigbee Adapters blockiert.
Diese Aussage macht keinen Sinn.
- der Zigbee-Adapter nutzt die GPIO's nicht.
- Einzig die raspbee/raspbee2 Platinen nutzen die GPIO. Austausch der Hardware wie oben geschrieben gegen ein Lan Gateway reicht. Du schreibst aber auch das du einen USB Stick hast. Also sollte das nicht Dein Problem sein
- Serielle Schnittstellen die über USB angebunden werden laufen auch nicht via GPIO
A.
Nachtrag: Es ist bekannt das das Fritz Smart Home maximal 100 Smart Home Geräte (50 an der Box, 50 am Gateway). Das gilt für Zigbee und Dect gemeinsam.
Ich hab in meiner kleinen Wohnung schon 75
-
@asgothian said in FritzBox Zigbee Antenne in ioBroker einbinden?:
@searcher57 sagte in FritzBox Zigbee Antenne in ioBroker einbinden?:
@homoran said in FritzBox Zigbee Antenne in ioBroker einbinden?:
@searcher57 ein RasPi5 hat doch mehr als 1 USB Buchse!
Das Problem habe ich schon mehrfach erwähnt. Ich lese den Stromzähler über die GPIO Schnittstelle aus und damit wird die Möglichkeit des Zigbee Adapters blockiert.
Diese Aussage macht keinen Sinn.
- der Zigbee-Adapter nutzt die GPIO's nicht.
- Einzig die raspbee/raspbee2 Platinen nutzen die GPIO. Austausch der Hardware wie oben geschrieben gegen ein Lan Gateway reicht. Du schreibst aber auch das du einen USB Stick hast. Also sollte das nicht Dein Problem sein
- Serielle Schnittstellen die über USB angebunden werden laufen auch nicht via GPIO
A.
Nachtrag: Es ist bekannt das das Fritz Smart Home maximal 100 Smart Home Geräte (50 an der Box, 50 am Gateway). Das gilt für Zigbee und Dect gemeinsam.
Ich hab in meiner kleinen Wohnung schon 75
Also ich bekomme es an meinem Raspi 5 nicht hin, den Zigbee USB Stick zu installieren und nehme an, dass das an meinem Adapter von Hausautomatisierung liegt, der die serielle Schnittstelle belegt. Denn an meinem Raspi 4 habe ich keine Probleme.
-
@searcher57 sagte in FritzBox Zigbee Antenne in ioBroker einbinden?:
Also ich bekomme es an meinem Raspi 5 nicht hin, den Zigbee USB Stick zu installieren und nehme an, dass das an meinem Adapter von Hausautomatisierung liegt, der die serielle Schnittstelle belegt. Denn an meinem Raspi 4 habe ich keine Probleme.
Link bitte auf den Adapter. Wenn der USB ist dann stimmt da was nicht (Alternativ: Bild)
A.
-
@asgothian möglicherweise liegt es am OS!
Kann sein, dass die Schnittstellenbezeichnungen geändert wurden -
@asgothian said in FritzBox Zigbee Antenne in ioBroker einbinden?:
@searcher57 sagte in FritzBox Zigbee Antenne in ioBroker einbinden?:
Also ich bekomme es an meinem Raspi 5 nicht hin, den Zigbee USB Stick zu installieren und nehme an, dass das an meinem Adapter von Hausautomatisierung liegt, der die serielle Schnittstelle belegt. Denn an meinem Raspi 4 habe ich keine Probleme.
Link bitte auf den Adapter. Wenn der USB ist dann stimmt da was nicht (Alternativ: Bild)
A.
Also nicht der Adapter! Aber ich habe den folgenden Lesekopf erfolgreich in Betrieb:
-
@searcher57 said in FritzBox Zigbee Antenne in ioBroker einbinden?:
@asgothian said in FritzBox Zigbee Antenne in ioBroker einbinden?:
@searcher57 sagte in FritzBox Zigbee Antenne in ioBroker einbinden?:
Also ich bekomme es an meinem Raspi 5 nicht hin, den Zigbee USB Stick zu installieren und nehme an, dass das an meinem Adapter von Hausautomatisierung liegt, der die serielle Schnittstelle belegt. Denn an meinem Raspi 4 habe ich keine Probleme.
Link bitte auf den Adapter. Wenn der USB ist dann stimmt da was nicht (Alternativ: Bild)
A.
Also nicht der Adapter! Aber ich habe den folgenden Lesekopf erfolgreich in Betrieb:
Und wenn ich den Smartmeter-Adapter lösche, dann kann ich auch den Zigbee-Adapter erfolgreich einrichten. Daher meine Frage, ob die Anschaffung und Einrichtung des AVM Zigbee Gateway eine Alternative wäre?
-
@searcher57 sagte in FritzBox Zigbee Antenne in ioBroker einbinden?:
@searcher57 said in FritzBox Zigbee Antenne in ioBroker einbinden?:
@asgothian said in FritzBox Zigbee Antenne in ioBroker einbinden?:
@searcher57 sagte in FritzBox Zigbee Antenne in ioBroker einbinden?:
Also ich bekomme es an meinem Raspi 5 nicht hin, den Zigbee USB Stick zu installieren und nehme an, dass das an meinem Adapter von Hausautomatisierung liegt, der die serielle Schnittstelle belegt. Denn an meinem Raspi 4 habe ich keine Probleme.
Link bitte auf den Adapter. Wenn der USB ist dann stimmt da was nicht (Alternativ: Bild)
A.
Also nicht der Adapter! Aber ich habe den folgenden Lesekopf erfolgreich in Betrieb:
Und wenn ich den Smartmeter-Adapter lösche, dann kann ich auch den Zigbee-Adapter erfolgreich einrichten. Daher meine Frage, ob die Anschaffung und Einrichtung des AVM Zigbee Gateway eine Alternative wäre?
Nochmal - Dir kann nur geholfen werden wenn du hier Details zu deinem Zigbee Koordinator bereit stellst. Ein YouTube Video ist das nicht.
- Was ist das für Hardware
- Wo kommt sie her
- Wie wird sie verbunden
Was auch hilft:
- Smartmeter Lesekopf angeschlossen
- Zigbee Koordinator angeschlossen
dann auf der Konsole 'iob diag', und das Ergebnis (die Langfassung, nicht die Zusammenfassung) hier posten.
Dann können wir systematisch weiter machen. In wie weit das Fritz-Gateway eine Alternative ist habe ich oben bereits beantwortet. In meinen Augen ist es das nicht.
A.
-
@asgothian said in FritzBox Zigbee Antenne in ioBroker einbinden?:
@searcher57 sagte in FritzBox Zigbee Antenne in ioBroker einbinden?:
@searcher57 said in FritzBox Zigbee Antenne in ioBroker einbinden?:
@asgothian said in FritzBox Zigbee Antenne in ioBroker einbinden?:
@searcher57 sagte in FritzBox Zigbee Antenne in ioBroker einbinden?:
Also ich bekomme es an meinem Raspi 5 nicht hin, den Zigbee USB Stick zu installieren und nehme an, dass das an meinem Adapter von Hausautomatisierung liegt, der die serielle Schnittstelle belegt. Denn an meinem Raspi 4 habe ich keine Probleme.
Link bitte auf den Adapter. Wenn der USB ist dann stimmt da was nicht (Alternativ: Bild)
A.
Also nicht der Adapter! Aber ich habe den folgenden Lesekopf erfolgreich in Betrieb:
Und wenn ich den Smartmeter-Adapter lösche, dann kann ich auch den Zigbee-Adapter erfolgreich einrichten. Daher meine Frage, ob die Anschaffung und Einrichtung des AVM Zigbee Gateway eine Alternative wäre?
Nochmal - Dir kann nur geholfen werden wenn du hier Details zu deinem Zigbee Koordinator bereit stellst. Ein YouTube Video ist das nicht.
- Was ist das für Hardware
- Wo kommt sie her
- Wie wird sie verbunden
Was auch hilft:
- Smartmeter Lesekopf angeschlossen
- Zigbee Koordinator angeschlossen
dann auf der Konsole 'iob diag', und das Ergebnis (die Langfassung, nicht die Zusammenfassung) hier posten.
Dann können wir systematisch weiter machen. In wie weit das Fritz-Gateway eine Alternative ist habe ich oben bereits beantwortet. In meinen Augen ist es das nicht.
A.
Der Zigbee Koordinator ist der Sonoff_Zigbee_3.0_USB_Dongle_Plus.
Er steckt in einer der USB Buchsen eines Raspi 4.
Der Smartmeter IR Lesekopf ist an J8 1 (Plus3,3 V); J8 6 (GND); J8 8 (TXD0); J8 10 (RXD0) am GPIO eines Raspi 5 angeschlossen.iob diag des Raspi 4:
```bash Script v.2025-02-23 *** BASE SYSTEM *** Static hostname: Raspi48GB Icon name: computer Operating System: Debian GNU/Linux 12 (bookworm) Kernel: Linux 6.12.20+rpt-rpi-v8 Architecture: arm64 OS is similar to: Model : Raspberry Pi 4 Model B Rev 1.5 Docker : false Virtualization : none Kernel : aarch64 Userland : 64 bit Systemuptime and Load: 16:33:32 up 3 days, 22:13, 2 users, load average: 0.19, 0.15, 0.16 CPU threads: 4 *** LIFE CYCLE STATUS *** Operating System is the current Debian stable version codenamed 'bookworm'! *** RASPBERRY THROTTLING *** Current issues: No throttling issues detected. Previously detected issues: No throttling issues detected. *** TIME AND TIMEZONES *** Local time: Wed 2025-05-07 16:33:32 CEST Universal time: Wed 2025-05-07 14:33:32 UTC RTC time: n/a Time zone: Europe/Berlin (CEST, +0200) System clock synchronized: yes NTP service: active RTC in local TZ: no *** Users and Groups *** User that called 'iob diag': pi HOME=/home/pi GROUPS=pi adm dialout cdrom sudo audio video plugdev games users input render netdev gpio i2c spi iobroker User that is running 'js-controller': iobroker HOME=/home/iobroker GROUPS=iobroker tty dialout audio video plugdev bluetooth gpio i2c *** DISPLAY-SERVER SETUP *** Display-Server: false Desktop: Terminal: tty *** MEMORY *** total used free shared buff/cache available Mem: 8.2G 1.9G 5.6G 1.2M 828M 6.3G Swap: 209M 0B 209M Total: 8.4G 1.9G 5.8G Active iob-Instances: 18 7809 M total memory 1782 M used memory 1850 M active memory 449 M inactive memory 5360 M free memory 116 M buffer memory 673 M swap cache 199 M total swap 0 M used swap 199 M free swap *** top - Table Of Processes *** top - 16:33:32 up 3 days, 22:13, 2 users, load average: 0.19, 0.15, 0.16 Tasks: 187 total, 1 running, 186 sleeping, 0 stopped, 0 zombie %Cpu(s): 0.0 us, 20.0 sy, 0.0 ni, 80.0 id, 0.0 wa, 0.0 hi, 0.0 si, 0.0 st MiB Mem : 7809.4 total, 5358.0 free, 1784.5 used, 790.2 buff/cache MiB Swap: 200.0 total, 200.0 free, 0.0 used. 6024.9 avail Mem *** FAILED SERVICES *** UNIT LOAD ACTIVE SUB DESCRIPTION 0 loaded units listed. *** DMESG CRITICAL ERRORS *** No critical errors detected *** FILESYSTEM *** Filesystem Type Size Used Avail Use% Mounted on udev devtmpfs 3.6G 0 3.6G 0% /dev tmpfs tmpfs 781M 1.2M 780M 1% /run /dev/mmcblk0p2 ext4 59G 9.7G 46G 18% / tmpfs tmpfs 3.9G 0 3.9G 0% /dev/shm tmpfs tmpfs 5.0M 16K 5.0M 1% /run/lock /dev/mmcblk0p1 vfat 510M 66M 445M 13% /boot/firmware /dev/sda1 exfat 3.9G 113M 3.7G 3% /mnt/usb0 tmpfs tmpfs 781M 0 781M 0% /run/user/1000 Messages concerning ext4 filesystem in dmesg: [Sat May 3 18:19:47 2025] Kernel command line: coherent_pool=1M 8250.nr_uarts=1 snd_bcm2835.enable_headphones=0 cgroup_disable=memory numa_policy=interleave snd_bcm2835.enable_headphones=1 snd_bcm2835.enable_hdmi=1 snd_bcm2835.enable_hdmi=0 smsc95xx.macaddr=D8:3A:DD:43:B6:26 vc_mem.mem_base=0x3ec00000 vc_mem.mem_size=0x40000000 console=tty1 root=PARTUUID=8ebf6d55-02 rootfstype=ext4 fsck.repair=yes rootwait [Sat May 3 18:19:49 2025] EXT4-fs (mmcblk0p2): mounted filesystem 93c89e92-8f2e-4522-ad32-68faed883d2f ro with ordered data mode. Quota mode: none. [Sat May 3 18:19:50 2025] EXT4-fs (mmcblk0p2): re-mounted 93c89e92-8f2e-4522-ad32-68faed883d2f r/w. Quota mode: none. Show mounted filesystems: TARGET SOURCE FSTYPE OPTIONS / /dev/mmcblk0p2 ext4 rw,noatime |-/boot/firmware /dev/mmcblk0p1 vfat rw,relatime,fmask=0022,dmask=0022,codepage=437,iocharset=ascii,shortname=mixed,errors=remount-ro `-/mnt/usb0 /dev/sda1 exfat rw,relatime,fmask=0000,dmask=0000,allow_utime=0022,iocharset=utf8,errors=remount-ro Files in neuralgic directories: /var: 1.4G /var/ 745M /var/log 744M /var/log/journal/0e010272fae14c1784990c1fc7429731 744M /var/log/journal 236M /var/cache Journal file /var/log/journal/0e010272fae14c1784990c1fc7429731/user-1001@00062a7f4e38fbb1-0ae92bb7e00931f0.journal~ is truncated, ignoring file. Archived and active journals take up 743.6M in the file system. /opt/iobroker/backups: 196M /opt/iobroker/backups/ /opt/iobroker/iobroker-data: 1.1G /opt/iobroker/iobroker-data/ 953M /opt/iobroker/iobroker-data/files 617M /opt/iobroker/iobroker-data/files/javascript.admin 560M /opt/iobroker/iobroker-data/files/javascript.admin/static 558M /opt/iobroker/iobroker-data/files/javascript.admin/static/js The five largest files in iobroker-data are: 35M /opt/iobroker/iobroker-data/files/devices.admin/static/js/main.24f2bb56.js.map 24M /opt/iobroker/iobroker-data/files/vis-2/static/js/main.f305bc29.js.map 24M /opt/iobroker/iobroker-data/files/vis-2/static/js/main.8e80ccb0.js.map 24M /opt/iobroker/iobroker-data/files/vis-2/customWidgets.js.map 19M /opt/iobroker/iobroker-data/files/text2command.admin/static/js/main.02fc3820.js.map USB-Devices by-id: USB-Sticks - Avoid direct links to /dev/tty* in your adapter setups, please always prefer the links 'by-id': /dev/serial/by-id/usb-ITead_Sonoff_Zigbee_3.0_USB_Dongle_Plus_0867d5d6b78ded11959b02f6b86ce6f8-if00-port0 *** ZigBee Settings *** Your zigbee.0 COM-Port is matching 'by-id'. Very good! Zigbee Network Settings on your coordinator/in nvbackup are: zigbee.X Extended Pan ID: *** MASKED *** Pan ID: *** MASKED *** Channel: *** MASKED *** Network Key: *** MASKED *** To unmask the settings run 'iob diag --unmask' *** NodeJS-Installation *** /usr/bin/nodejs v20.19.1 /usr/bin/node v20.19.1 /usr/bin/npm 10.8.2 /usr/bin/npx 10.8.2 /usr/bin/corepack 0.31.0 nodejs: Installed: 20.19.1-1nodesource1 Candidate: 20.19.1-1nodesource1 Version table: *** 20.19.1-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 100 /var/lib/dpkg/status 20.19.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.18.3-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.18.2-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.18.1-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.18.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.17.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.16.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.15.1-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.15.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.14.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.13.1-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.13.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.12.2-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.12.1-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.12.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.11.1-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.11.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.10.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.9.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.8.1-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.8.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.7.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.6.1-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.6.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.5.1-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.5.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.4.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.3.1-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.3.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.2.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.1.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.0.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 18.19.0+dfsg-6~deb12u2 500 500 http://deb.debian.org/debian bookworm/main arm64 Packages 18.19.0+dfsg-6~deb12u1 500 500 http://deb.debian.org/debian-security bookworm-security/main arm64 Packages Temp directories causing deletion problem: 0 No problems detected Errors in npm tree: 0 No problems detected *** ioBroker-Installation *** ioBroker Status iobroker is running on this host. Objects type: jsonl States type: jsonl Hosts: Raspi48GB Raspi48GB (version: 7.0.6, hostname: Raspi48GB , alive, uptime: 339213) Core adapters versions js-controller: 7.0.6 admin: 7.6.3 javascript: 8.8.3 nodejs modules from github: 0 Adapter State + system.adapter.admin.0 : admin : Raspi48GB - enabled, port: 8081, bind: 0.0.0.0, run as: admin + system.adapter.backitup.0 : backitup : Raspi48GB - enabled + system.adapter.discovery.0 : discovery : Raspi48GB - enabled + system.adapter.followthesun.0 : followthesun : Raspi48GB - enabled + system.adapter.frontier_silicon.0 : frontier_silicon : Raspi48GB - enabled + system.adapter.hm-rega.0 : hm-rega : Raspi48GB - enabled + system.adapter.hm-rpc.0 : hm-rpc : Raspi48GB - enabled, port: 0 + system.adapter.hm-rpc.1 : hm-rpc : Raspi48GB - enabled, port: 0 + system.adapter.javascript.0 : javascript : Raspi48GB - enabled + system.adapter.mqtt.0 : mqtt : Raspi48GB - enabled, port: 1883, bind: 0.0.0.0 + system.adapter.shelly.0 : shelly : Raspi48GB - enabled, port: 1882, bind: 0.0.0.0 + system.adapter.shelly.1 : shelly : Raspi48GB - enabled, port: 1882, bind: 0.0.0.0 + system.adapter.telegram.0 : telegram : Raspi48GB - enabled, port: 8443, bind: 0.0.0.0 + system.adapter.text2command.0 : text2command : Raspi48GB - enabled + system.adapter.vis-2.0 : vis-2 : Raspi48GB - enabled + system.adapter.web.0 : web : Raspi48GB - enabled, port: 8082, bind: 0.0.0.0, run as: admin system.adapter.yr.0 : yr : Raspi48GB - enabled + system.adapter.zigbee.0 : zigbee : Raspi48GB - enabled, port: /dev/serial/by-id/usb-ITead_Sonoff_Zigbee_3.0_USB_Dongle_Plus_0867d5d6b78ded11959b02f6b86ce6f8-if00-port0 + instance is alive Enabled adapters with bindings + system.adapter.admin.0 : admin : Raspi48GB - enabled, port: 8081, bind: 0.0.0.0, run as: admin + system.adapter.hm-rpc.0 : hm-rpc : Raspi48GB - enabled, port: 0 + system.adapter.hm-rpc.1 : hm-rpc : Raspi48GB - enabled, port: 0 + system.adapter.mqtt.0 : mqtt : Raspi48GB - enabled, port: 1883, bind: 0.0.0.0 + system.adapter.shelly.0 : shelly : Raspi48GB - enabled, port: 1882, bind: 0.0.0.0 + system.adapter.shelly.1 : shelly : Raspi48GB - enabled, port: 1882, bind: 0.0.0.0 + system.adapter.telegram.0 : telegram : Raspi48GB - enabled, port: 8443, bind: 0.0.0.0 + system.adapter.web.0 : web : Raspi48GB - enabled, port: 8082, bind: 0.0.0.0, run as: admin + system.adapter.zigbee.0 : zigbee : Raspi48GB - enabled, port: /dev/serial/by-id/usb-ITead_Sonoff_Zigbee_3.0_USB_Dongle_Plus_0867d5d6b78ded11959b02f6b86ce6f8-if00-port0 ioBroker-Repositories ┌─────────┬──────────┬─────────────────────────────────────────────────────────┬──────────────┐ │ (index) │ name │ url │ auto upgrade │ ├─────────┼──────────┼─────────────────────────────────────────────────────────┼──────────────┤ │ 0 │ 'stable' │ 'http://download.iobroker.net/sources-dist.json' │ false │ │ 1 │ 'beta' │ 'http://download.iobroker.net/sources-dist-latest.json' │ false │ └─────────┴──────────┴─────────────────────────────────────────────────────────┴──────────────┘ Active repo(s): stable Upgrade policy: none Installed ioBroker-Adapters Used repository: stable Adapter "admin" : 7.6.3 , installed 7.6.3 Adapter "backitup" : 3.0.31 , installed 3.0.31 Adapter "discovery" : 5.0.0 , installed 5.0.0 Adapter "followthesun" : 0.5.2 , installed 0.5.2 Adapter "frontier_silicon": 0.4.0 , installed 0.4.0 Adapter "hm-rega" : 5.1.0 , installed 5.1.0 Adapter "hm-rpc" : 2.0.2 , installed 2.0.2 Adapter "javascript" : 8.8.3 , installed 8.8.3 Controller "js-controller": 7.0.6 , installed 7.0.6 Adapter "mqtt" : 6.1.2 , installed 6.1.2 Adapter "shelly" : 9.2.0 , installed 9.2.0 Adapter "socketio" : 6.7.1 , installed 6.7.1 Adapter "telegram" : 4.1.0 , installed 4.1.0 Adapter "text2command" : 3.0.3 , installed 3.0.3 Adapter "vis-2" : 2.9.64 , installed 2.9.64 Adapter "web" : 7.0.8 , installed 7.0.8 Adapter "ws" : 2.6.2 , installed 2.6.2 Adapter "yr" : 5.3.0 , installed 5.3.0 Adapter "zigbee" : 2.0.5 , installed 2.0.5 Objects and States Please stand by - This may take a while Objects: 8176 States: 6839 *** OS-Repositories and Updates *** Hit:1 http://deb.debian.org/debian bookworm InRelease Hit:2 http://archive.raspberrypi.com/debian bookworm InRelease Hit:3 http://deb.debian.org/debian-security bookworm-security InRelease Hit:4 http://deb.debian.org/debian bookworm-updates InRelease Hit:5 https://repos.influxdata.com/debian stable InRelease Hit:6 https://deb.nodesource.com/node_20.x nodistro InRelease Reading package lists... Pending Updates: 5 *** Listening Ports *** Active Internet connections (only servers) Proto Recv-Q Send-Q Local Address Foreign Address State User Inode PID/Program name tcp 0 0 0.0.0.0:9000 0.0.0.0:* LISTEN 1001 7415 846/iobroker.js-con tcp 0 0 0.0.0.0:9001 0.0.0.0:* LISTEN 1001 7410 846/iobroker.js-con tcp 0 0 0.0.0.0:22 0.0.0.0:* LISTEN 0 597 729/sshd: /usr/sbin tcp 0 0 0.0.0.0:1882 0.0.0.0:* LISTEN 1001 7782 1100/io.shelly.1 tcp 0 0 192.168.178.74:2001 0.0.0.0:* LISTEN 1001 7072 1048/io.hm-rpc.1 tcp 0 0 192.168.178.74:42010 0.0.0.0:* LISTEN 1001 9257 1029/io.hm-rpc.0 tcp6 0 0 :::22 :::* LISTEN 0 599 729/sshd: /usr/sbin tcp6 0 0 :::8086 :::* LISTEN 999 5898 793/influxd tcp6 0 0 :::8082 :::* LISTEN 1001 7866 1206/io.web.0 tcp6 0 0 :::8081 :::* LISTEN 1001 6804 871/io.admin.0 udp 0 0 0.0.0.0:5353 0.0.0.0:* 104 465 597/avahi-daemon: r udp 0 0 0.0.0.0:5683 0.0.0.0:* 1001 7130 1085/io.shelly.0 udp 0 0 0.0.0.0:42793 0.0.0.0:* 104 467 597/avahi-daemon: r udp 0 0 0.0.0.0:59206 0.0.0.0:* 1001 1227685 1085/io.shelly.0 udp6 0 0 fe80::29e3:a8b6:106:546 :::* 0 1831 674/NetworkManager udp6 0 0 :::42077 :::* 104 468 597/avahi-daemon: r udp6 0 0 :::5353 :::* 104 466 597/avahi-daemon: r *** Log File - Last 25 Lines *** 2025-05-07 16:33:40.272 - info: frontier_silicon.0 (9526) Session 1335956371 with Device Büro Rainer @ 192.168.178.32 created 2025-05-07 16:33:45.640 - info: frontier_silicon.0 (9526) Session error, trying to reestablish session... 2025-05-07 16:33:45.648 - info: frontier_silicon.0 (9526) Trying to create session with Büro Rainer @ 192.168.178.32 ... 2025-05-07 16:33:45.683 - info: frontier_silicon.0 (9526) Session 1333214537 with Device Büro Rainer @ 192.168.178.32 created 2025-05-07 16:33:50.982 - info: frontier_silicon.0 (9526) Session error, trying to reestablish session... 2025-05-07 16:33:50.999 - info: frontier_silicon.0 (9526) Trying to create session with Büro Rainer @ 192.168.178.32 ... 2025-05-07 16:33:51.033 - info: frontier_silicon.0 (9526) Session 303681352 with Device Büro Rainer @ 192.168.178.32 created 2025-05-07 16:33:57.050 - info: frontier_silicon.0 (9526) Session error, trying to reestablish session... 2025-05-07 16:33:57.203 - info: frontier_silicon.0 (9526) Trying to create session with Büro Rainer @ 192.168.178.32 ... 2025-05-07 16:33:57.258 - info: frontier_silicon.0 (9526) Session 1627176082 with Device Büro Rainer @ 192.168.178.32 created 2025-05-07 16:34:02.379 - info: frontier_silicon.0 (9526) Session error, trying to reestablish session... 2025-05-07 16:34:03.498 - info: frontier_silicon.0 (9526) Trying to create session with Büro Rainer @ 192.168.178.32 ... 2025-05-07 16:34:03.566 - info: frontier_silicon.0 (9526) Session 1755935975 with Device Büro Rainer @ 192.168.178.32 created 2025-05-07 16:34:12.690 - info: frontier_silicon.0 (9526) Session error, trying to reestablish session... 2025-05-07 16:34:12.696 - info: frontier_silicon.0 (9526) Trying to create session with Büro Rainer @ 192.168.178.32 ... 2025-05-07 16:34:12.747 - info: frontier_silicon.0 (9526) Session 747212227 with Device Büro Rainer @ 192.168.178.32 created 2025-05-07 16:34:18.014 - info: frontier_silicon.0 (9526) Session error, trying to reestablish session... 2025-05-07 16:34:18.027 - info: frontier_silicon.0 (9526) Trying to create session with Büro Rainer @ 192.168.178.32 ... 2025-05-07 16:34:18.092 - info: frontier_silicon.0 (9526) Session 275369552 with Device Büro Rainer @ 192.168.178.32 created 2025-05-07 16:34:23.367 - info: frontier_silicon.0 (9526) Session error, trying to reestablish session... 2025-05-07 16:34:23.376 - info: frontier_silicon.0 (9526) Trying to create session with Büro Rainer @ 192.168.178.32 ... 2025-05-07 16:34:23.452 - info: frontier_silicon.0 (9526) Session 371385807 with Device Büro Rainer @ 192.168.178.32 created 2025-05-07 16:34:28.668 - info: frontier_silicon.0 (9526) Session error, trying to reestablish session... 2025-05-07 16:34:28.676 - info: frontier_silicon.0 (9526) Trying to create session with Büro Rainer @ 192.168.178.32 ... 2025-05-07 16:34:28.830 - info: frontier_silicon.0 (9526) Session 1485438321 with Device Büro Rainer @ 192.168.178.32 creatediob diag des Raspi 5:
Script v.2025-02-23 *** BASE SYSTEM *** Static hostname: Raspi58GB Icon name: computer Operating System: Debian GNU/Linux 12 (bookworm) Kernel: Linux 6.6.74+rpt-rpi-2712 Architecture: arm64 OS is similar to: Model : Raspberry Pi 5 Model B Rev 1.0 Docker : false Virtualization : none Kernel : aarch64 Userland : 64 bit Systemuptime and Load: 16:37:09 up 73 days, 1:16, 2 users, load average: 0.38, 0.24, 0.15 CPU threads: 4 *** LIFE CYCLE STATUS *** Operating System is the current Debian stable version codenamed 'bookworm'! *** RASPBERRY THROTTLING *** Current issues: No throttling issues detected. Previously detected issues: No throttling issues detected. *** TIME AND TIMEZONES *** Local time: Wed 2025-05-07 16:37:09 CEST Universal time: Wed 2025-05-07 14:37:09 UTC RTC time: Wed 2025-05-07 14:37:09 Time zone: Europe/Berlin (CEST, +0200) System clock synchronized: yes NTP service: active RTC in local TZ: no *** Users and Groups *** User that called 'iob diag': pi HOME=/home/pi GROUPS=pi adm dialout cdrom sudo audio video plugdev games users input render netdev gpio i2c spi iobroker User that is running 'js-controller': iobroker HOME=/home/iobroker GROUPS=iobroker tty dialout audio video plugdev bluetooth gpio i2c *** DISPLAY-SERVER SETUP *** Display-Server: false Desktop: Terminal: tty *** MEMORY *** total used free shared buff/cache available Mem: 8.4G 3.6G 1.3G 2.9M 3.7G 4.9G Swap: 209M 4.2M 205M Total: 8.7G 3.6G 1.5G Active iob-Instances: 30 8052 M total memory 3396 M used memory 4176 M active memory 2115 M inactive memory 1234 M free memory 134 M buffer memory 3386 M swap cache 199 M total swap 4 M used swap 195 M free swap *** top - Table Of Processes *** top - 16:37:09 up 73 days, 1:16, 2 users, load average: 0.43, 0.25, 0.15 Tasks: 192 total, 1 running, 191 sleeping, 0 stopped, 0 zombie %Cpu(s): 0.0 us, 0.0 sy, 0.0 ni, 88.9 id, 11.1 wa, 0.0 hi, 0.0 si, 0.0 st MiB Mem : 8052.2 total, 1235.1 free, 3395.7 used, 3521.1 buff/cache MiB Swap: 200.0 total, 196.0 free, 4.0 used. 4656.6 avail Mem *** FAILED SERVICES *** UNIT LOAD ACTIVE SUB DESCRIPTION 0 loaded units listed. *** DMESG CRITICAL ERRORS *** 15 CRITICAL ERRORS DETECTED! Check 'sudo dmesg --level=emerg,alert,crit -T' for details *** FILESYSTEM *** Filesystem Type Size Used Avail Use% Mounted on udev devtmpfs 3.9G 0 3.9G 0% /dev tmpfs tmpfs 806M 5.3M 800M 1% /run /dev/mmcblk0p2 ext4 59G 11G 45G 20% / tmpfs tmpfs 4.0G 0 4.0G 0% /dev/shm tmpfs tmpfs 5.0M 48K 5.0M 1% /run/lock /dev/sda1 exfat 29G 7.1G 22G 25% /mnt/usb0 /dev/mmcblk0p1 vfat 510M 66M 445M 13% /boot/firmware tmpfs tmpfs 806M 0 806M 0% /run/user/1000 Messages concerning ext4 filesystem in dmesg: [Sun Feb 23 14:20:43 2025] Kernel command line: reboot=w coherent_pool=1M 8250.nr_uarts=1 pci=pcie_bus_safe cgroup_disable=memory numa_policy=interleave smsc95xx.macaddr=2C:CF:67:2F:A6:31 vc_mem.mem_base=0x3fc00000 vc_mem.mem_size=0x40000000 console=tty1 console=ttyAMA10,115200 root=PARTUUID=70767922-02 rootfstype=ext4 fsck.repair=yes rootwait [Sun Feb 23 14:20:47 2025] EXT4-fs (mmcblk0p2): mounted filesystem 56f80fa2-e005-4cca-86e6-19da1069914d ro with ordered data mode. Quota mode: none. [Sun Feb 23 14:20:51 2025] EXT4-fs (mmcblk0p2): re-mounted 56f80fa2-e005-4cca-86e6-19da1069914d r/w. Quota mode: none. Show mounted filesystems: TARGET SOURCE FSTYPE OPTIONS / /dev/mmcblk0p2 ext4 rw,noatime |-/mnt/usb0 /dev/sda1 exfat rw,relatime,fmask=0000,dmask=0000,allow_utime=0022,iocharset=utf8,errors=remount-ro `-/boot/firmware /dev/mmcblk0p1 vfat rw,relatime,fmask=0022,dmask=0022,codepage=437,iocharset=ascii,shortname=mixed,errors=remount-ro Files in neuralgic directories: /var: 1.6G /var/ 976M /var/log/journal/61b86e93a3bd4c4e97ff911079b6083e 976M /var/log/journal 976M /var/log 208M /var/cache Archived and active journals take up 975.3M in the file system. /opt/iobroker/backups: 320M /opt/iobroker/backups/ /opt/iobroker/iobroker-data: 1.4G /opt/iobroker/iobroker-data/ 1.2G /opt/iobroker/iobroker-data/files 617M /opt/iobroker/iobroker-data/files/javascript.admin 560M /opt/iobroker/iobroker-data/files/javascript.admin/static 558M /opt/iobroker/iobroker-data/files/javascript.admin/static/js The five largest files in iobroker-data are: 38M /opt/iobroker/iobroker-data/files/iot.admin/static/js/main.d3d286bd.js.map 35M /opt/iobroker/iobroker-data/files/devices.admin/static/js/main.24f2bb56.js.map 32M /opt/iobroker/iobroker-data/objects.jsonl 27M /opt/iobroker/iobroker-data/files/tankerkoenig.admin/build/index.js.map 26M /opt/iobroker/iobroker-data/files/echarts/static/js/main.41cee985.js.map USB-Devices by-id: USB-Sticks - Avoid direct links to /dev/tty* in your adapter setups, please always prefer the links 'by-id': No Devices found 'by-id' *** ZigBee Settings *** Zigbee Network Settings on your coordinator/in nvbackup are: zigbee.X Extended Pan ID: *** MASKED *** Pan ID: *** MASKED *** Channel: *** MASKED *** Network Key: *** MASKED *** To unmask the settings run 'iob diag --unmask' *** NodeJS-Installation *** /usr/bin/nodejs v20.19.1 /usr/bin/node v20.19.1 /usr/bin/npm 10.8.2 /usr/bin/npx 10.8.2 /usr/bin/corepack 0.31.0 nodejs: Installed: 20.19.1-1nodesource1 Candidate: 20.19.1-1nodesource1 Version table: *** 20.19.1-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 100 /var/lib/dpkg/status 20.19.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.18.3-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.18.2-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.18.1-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.18.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.17.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.16.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.15.1-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.15.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.14.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.13.1-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.13.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.12.2-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.12.1-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.12.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.11.1-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.11.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.10.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.9.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.8.1-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.8.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.7.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.6.1-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.6.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.5.1-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.5.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.4.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.3.1-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.3.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.2.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.1.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.0.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 18.19.0+dfsg-6~deb12u2 500 500 http://deb.debian.org/debian bookworm/main arm64 Packages 18.19.0+dfsg-6~deb12u1 500 500 http://deb.debian.org/debian-security bookworm-security/main arm64 Packages Temp directories causing deletion problem: 0 No problems detected Errors in npm tree: 0 No problems detected *** ioBroker-Installation *** ioBroker Status iobroker is running on this host. Objects type: jsonl States type: jsonl Hosts: Raspi58GB Raspi58GB (version: 7.0.6, hostname: Raspi58GB , alive, uptime: 2678955) Core adapters versions js-controller: 7.0.6 admin: 7.6.3 javascript: 8.8.3 nodejs modules from github: 0 Adapter State + system.adapter.admin.0 : admin : Raspi58GB - enabled, port: 8081, bind: 0.0.0.0, run as: admin + system.adapter.alexa2.0 : alexa2 : Raspi58GB - enabled system.adapter.alias-manager.0 : alias-manager : Raspi58GB - disabled + system.adapter.awtrix-light.0 : awtrix-light : Raspi58GB - enabled + system.adapter.backitup.0 : backitup : Raspi58GB - enabled + system.adapter.broadlink2.0 : broadlink2 : Raspi58GB - enabled system.adapter.devices.0 : devices : Raspi58GB - disabled + system.adapter.discovery.0 : discovery : Raspi58GB - enabled + system.adapter.doorbird.0 : doorbird : Raspi58GB - enabled + system.adapter.echarts.0 : echarts : Raspi58GB - enabled + system.adapter.followthesun.0 : followthesun : Raspi58GB - enabled + system.adapter.fritzdect.0 : fritzdect : Raspi58GB - enabled + system.adapter.frontier_silicon.0 : frontier_silicon : Raspi58GB - enabled system.adapter.frontier_silicon.1 : frontier_silicon : Raspi58GB - disabled system.adapter.frontier_silicon.2 : frontier_silicon : Raspi58GB - disabled system.adapter.frontier_silicon.3 : frontier_silicon : Raspi58GB - disabled + system.adapter.hm-rega.0 : hm-rega : Raspi58GB - enabled + system.adapter.hm-rpc.0 : hm-rpc : Raspi58GB - enabled, port: 0 + system.adapter.hm-rpc.1 : hm-rpc : Raspi58GB - enabled, port: 0 + system.adapter.influxdb.0 : influxdb : Raspi58GB - enabled, port: 8086 + system.adapter.iot.0 : iot : Raspi58GB - enabled + system.adapter.javascript.0 : javascript : Raspi58GB - enabled + system.adapter.mqtt.0 : mqtt : Raspi58GB - enabled, port: 1883, bind: 0.0.0.0 system.adapter.openweathermap.0 : openweathermap : Raspi58GB - enabled + system.adapter.rpi2.0 : rpi2 : Raspi58GB - enabled + system.adapter.shelly.0 : shelly : Raspi58GB - enabled, port: 1882, bind: 0.0.0.0 + system.adapter.shelly.1 : shelly : Raspi58GB - enabled, port: 1882, bind: 0.0.0.0 + system.adapter.simple-api.0 : simple-api : Raspi58GB - enabled, port: 8087, bind: 0.0.0.0, run as: admin + system.adapter.smartmeter.0 : smartmeter : Raspi58GB - enabled + system.adapter.tankerkoenig.0 : tankerkoenig : Raspi58GB - enabled + system.adapter.telegram.0 : telegram : Raspi58GB - enabled, port: 8443, bind: 0.0.0.0 + system.adapter.text2command.0 : text2command : Raspi58GB - enabled + system.adapter.tr-064.0 : tr-064 : Raspi58GB - enabled + system.adapter.vis-2.0 : vis-2 : Raspi58GB - enabled + system.adapter.web.0 : web : Raspi58GB - enabled, port: 8082, bind: 0.0.0.0, run as: admin system.adapter.yr.0 : yr : Raspi58GB - enabled + instance is alive Enabled adapters with bindings + system.adapter.admin.0 : admin : Raspi58GB - enabled, port: 8081, bind: 0.0.0.0, run as: admin + system.adapter.hm-rpc.0 : hm-rpc : Raspi58GB - enabled, port: 0 + system.adapter.hm-rpc.1 : hm-rpc : Raspi58GB - enabled, port: 0 + system.adapter.influxdb.0 : influxdb : Raspi58GB - enabled, port: 8086 + system.adapter.mqtt.0 : mqtt : Raspi58GB - enabled, port: 1883, bind: 0.0.0.0 + system.adapter.shelly.0 : shelly : Raspi58GB - enabled, port: 1882, bind: 0.0.0.0 + system.adapter.shelly.1 : shelly : Raspi58GB - enabled, port: 1882, bind: 0.0.0.0 + system.adapter.simple-api.0 : simple-api : Raspi58GB - enabled, port: 8087, bind: 0.0.0.0, run as: admin + system.adapter.telegram.0 : telegram : Raspi58GB - enabled, port: 8443, bind: 0.0.0.0 + system.adapter.web.0 : web : Raspi58GB - enabled, port: 8082, bind: 0.0.0.0, run as: admin ioBroker-Repositories ┌─────────┬──────────┬─────────────────────────────────────────────────────────┬──────────────┐ │ (index) │ name │ url │ auto upgrade │ ├─────────┼──────────┼─────────────────────────────────────────────────────────┼──────────────┤ │ 0 │ 'stable' │ 'http://download.iobroker.net/sources-dist.json' │ false │ │ 1 │ 'beta' │ 'http://download.iobroker.net/sources-dist-latest.json' │ false │ └─────────┴──────────┴─────────────────────────────────────────────────────────┴──────────────┘ Active repo(s): stable Upgrade policy: none Installed ioBroker-Adapters Used repository: stable Adapter "admin" : 7.6.3 , installed 7.6.3 Adapter "alexa2" : 3.26.5 , installed 3.26.5 Adapter "alias-manager": 2.0.0 , installed 2.0.0 Adapter "awtrix-light" : 1.7.0 , installed 1.7.0 Adapter "backitup" : 3.0.31 , installed 3.0.31 Adapter "broadlink2" : 2.3.0 , installed 2.3.0 Adapter "devices" : 1.1.5 , installed 1.1.5 Adapter "discovery" : 5.0.0 , installed 5.0.0 Adapter "doorbird" : 3.0.0 , installed 3.0.0 Adapter "echarts" : 1.9.2 , installed 1.9.2 Adapter "followthesun" : 0.5.2 , installed 0.5.2 Adapter "fritzdect" : 2.6.1 , installed 2.6.1 Adapter "frontier_silicon": 0.4.0 , installed 0.4.0 Adapter "hm-rega" : 5.1.0 , installed 5.1.0 Adapter "hm-rpc" : 2.0.2 , installed 2.0.2 Adapter "influxdb" : 4.0.2 , installed 4.0.2 Adapter "iot" : 3.3.0 , installed 3.3.0 Adapter "javascript" : 8.8.3 , installed 8.8.3 Controller "js-controller": 7.0.6 , installed 7.0.6 Adapter "mqtt" : 6.1.2 , installed 6.1.2 Adapter "openweathermap": 1.1.2 , installed 1.1.2 Adapter "rpi2" : 2.4.0 , installed 2.4.0 Adapter "shelly" : 9.2.0 , installed 9.2.0 Adapter "simple-api" : 2.8.0 , installed 2.8.0 Adapter "smartmeter" : 3.4.0 , installed 3.4.0 Adapter "socketio" : 6.7.1 , installed 7.0.8 Adapter "tankerkoenig" : 3.4.0 , installed 3.4.0 Adapter "telegram" : 4.1.0 , installed 4.1.0 Adapter "text2command" : 3.0.3 , installed 3.0.3 Adapter "tr-064" : 4.3.0 , installed 4.3.0 Adapter "vis-2" : 2.9.64 , installed 2.9.64 Adapter "web" : 7.0.8 , installed 7.0.8 Adapter "ws" : 2.6.2 , installed 3.0.19 Adapter "yr" : 5.3.0 , installed 5.3.0 Objects and States Please stand by - This may take a while Objects: 13146 States: 10488 *** OS-Repositories and Updates *** Hit:1 http://deb.debian.org/debian bookworm InRelease Hit:2 http://deb.debian.org/debian-security bookworm-security InRelease Hit:3 http://deb.debian.org/debian bookworm-updates InRelease Hit:4 https://repos.influxdata.com/debian stable InRelease Hit:5 http://archive.raspberrypi.com/debian bookworm InRelease Hit:6 https://repo.mosquitto.org/debian bookworm InRelease Hit:7 https://deb.nodesource.com/node_20.x nodistro InRelease Reading package lists... Pending Updates: 5 *** Listening Ports *** Active Internet connections (only servers) Proto Recv-Q Send-Q Local Address Foreign Address State User Inode PID/Program name tcp 0 0 192.168.178.57:8100 0.0.0.0:* LISTEN 1001 66463903 2033716/io.doorbird tcp 0 0 0.0.0.0:1883 0.0.0.0:* LISTEN 106 3863 805/mosquitto tcp 0 0 0.0.0.0:1882 0.0.0.0:* LISTEN 1001 56846557 1759981/io.shelly.1 tcp 0 0 192.168.178.57:2001 0.0.0.0:* LISTEN 1001 49470928 1527570/io.hm-rpc.1 tcp 0 0 192.168.178.57:42010 0.0.0.0:* LISTEN 1001 49469243 1527555/io.hm-rpc.0 tcp 0 0 0.0.0.0:9001 0.0.0.0:* LISTEN 1001 49470488 1526995/iobroker.js tcp 0 0 0.0.0.0:9000 0.0.0.0:* LISTEN 1001 49469536 1526995/iobroker.js tcp 0 0 0.0.0.0:22 0.0.0.0:* LISTEN 0 6088 809/sshd: /usr/sbin tcp6 0 0 :::8081 :::* LISTEN 1001 49468404 1527024/io.admin.0 tcp6 0 0 :::8082 :::* LISTEN 1001 49477905 1530303/io.web.0 tcp6 0 0 :::8087 :::* LISTEN 1001 49475575 1530213/io.simple-a tcp6 0 0 :::8086 :::* LISTEN 999 9328 860/influxd tcp6 0 0 :::1883 :::* LISTEN 106 3864 805/mosquitto tcp6 0 0 :::22 :::* LISTEN 0 6090 809/sshd: /usr/sbin udp 0 0 0.0.0.0:5683 0.0.0.0:* 1001 56844730 1759975/io.shelly.0 udp 0 0 0.0.0.0:46834 0.0.0.0:* 1001 49469185 1527480/io.broadlin udp 0 0 0.0.0.0:38802 0.0.0.0:* 1001 49471820 1527480/io.broadlin udp 0 0 0.0.0.0:55259 0.0.0.0:* 1001 49469189 1527480/io.broadlin udp 0 0 0.0.0.0:51356 0.0.0.0:* 1001 49469183 1527480/io.broadlin udp 0 0 0.0.0.0:15001 0.0.0.0:* 1001 49471816 1527480/io.broadlin udp 0 0 0.0.0.0:52059 0.0.0.0:* 1001 49469914 1527480/io.broadlin udp 0 0 0.0.0.0:56404 0.0.0.0:* 1001 49469186 1527480/io.broadlin udp 0 0 0.0.0.0:48497 0.0.0.0:* 104 5966 691/avahi-daemon: r udp 0 0 0.0.0.0:57052 0.0.0.0:* 1001 49469187 1527480/io.broadlin udp 0 0 0.0.0.0:53585 0.0.0.0:* 1001 49471819 1527480/io.broadlin udp 0 0 0.0.0.0:53789 0.0.0.0:* 1001 49469188 1527480/io.broadlin udp 0 0 0.0.0.0:33732 0.0.0.0:* 1001 49469182 1527480/io.broadlin udp 0 0 0.0.0.0:38117 0.0.0.0:* 1001 49469184 1527480/io.broadlin udp 0 0 0.0.0.0:5353 0.0.0.0:* 104 5964 691/avahi-daemon: r udp6 0 0 :::39826 :::* 104 5967 691/avahi-daemon: r udp6 0 0 fe80::2ca:bf0f:5188:546 :::* 0 54293794 1668473/NetworkMana udp6 0 0 :::5353 :::* 104 5965 691/avahi-daemon: r *** Log File - Last 25 Lines *** 2025-05-07 16:37:05.012 - info: frontier_silicon.0 (2672562) Session error, trying to reestablish session... 2025-05-07 16:37:05.016 - info: frontier_silicon.0 (2672562) Trying to create session with Büro Rainer @ 192.168.178.32 ... 2025-05-07 16:37:05.055 - info: frontier_silicon.0 (2672562) Session 2061721712 with Device Büro Rainer @ 192.168.178.32 created 2025-05-07 16:37:10.323 - info: frontier_silicon.0 (2672562) Session error, trying to reestablish session... 2025-05-07 16:37:10.325 - info: frontier_silicon.0 (2672562) Trying to create session with Büro Rainer @ 192.168.178.32 ... 2025-05-07 16:37:10.356 - info: frontier_silicon.0 (2672562) Session 451722005 with Device Büro Rainer @ 192.168.178.32 created 2025-05-07 16:37:15.643 - info: frontier_silicon.0 (2672562) Session error, trying to reestablish session... 2025-05-07 16:37:15.645 - info: frontier_silicon.0 (2672562) Trying to create session with Büro Rainer @ 192.168.178.32 ... 2025-05-07 16:37:15.686 - info: frontier_silicon.0 (2672562) Session 1952788329 with Device Büro Rainer @ 192.168.178.32 created 2025-05-07 16:37:20.967 - info: frontier_silicon.0 (2672562) Session error, trying to reestablish session... 2025-05-07 16:37:20.974 - info: frontier_silicon.0 (2672562) Trying to create session with Büro Rainer @ 192.168.178.32 ... 2025-05-07 16:37:21.004 - info: frontier_silicon.0 (2672562) Session 1135379361 with Device Büro Rainer @ 192.168.178.32 created 2025-05-07 16:37:26.288 - info: frontier_silicon.0 (2672562) Session error, trying to reestablish session... 2025-05-07 16:37:26.291 - info: frontier_silicon.0 (2672562) Trying to create session with Büro Rainer @ 192.168.178.32 ... 2025-05-07 16:37:26.349 - info: frontier_silicon.0 (2672562) Session 962948919 with Device Büro Rainer @ 192.168.178.32 created 2025-05-07 16:37:29.857 - error: host.Raspi58GB cannot call visUtils: Not exists 2025-05-07 16:37:31.627 - info: frontier_silicon.0 (2672562) Session error, trying to reestablish session... 2025-05-07 16:37:31.630 - info: frontier_silicon.0 (2672562) Trying to create session with Büro Rainer @ 192.168.178.32 ... 2025-05-07 16:37:31.686 - info: frontier_silicon.0 (2672562) Session 409573902 with Device Büro Rainer @ 192.168.178.32 created 2025-05-07 16:37:36.976 - info: frontier_silicon.0 (2672562) Session error, trying to reestablish session... 2025-05-07 16:37:36.980 - info: frontier_silicon.0 (2672562) Trying to create session with Büro Rainer @ 192.168.178.32 ... 2025-05-07 16:37:37.043 - info: frontier_silicon.0 (2672562) Session 488785493 with Device Büro Rainer @ 192.168.178.32 created 2025-05-07 16:37:42.318 - info: frontier_silicon.0 (2672562) Session error, trying to reestablish session... 2025-05-07 16:37:42.321 - info: frontier_silicon.0 (2672562) Trying to create session with Büro Rainer @ 192.168.178.32 ... 2025-05-07 16:37:42.476 - info: frontier_silicon.0 (2672562) Session 1811612933 with Device Büro Rainer @ 192.168.178.32 createdBeide funktionieren bestens. Ich möchte aber die Zigbee Komonenten im Raspi 5 integrieren und das funktioniert nur, wenn ich den IR Lesekopf abklemme und den Sonoff Zigbee 3.0 USB Dongle Plus in die USB Buchse stecke.
-
@searcher57 sagte in FritzBox Zigbee Antenne in ioBroker einbinden?:
Ich möchte aber die Zigbee Komonenten im Raspi 5 integrieren
und genau davon brauchen wir das iob diag!
da ist weder eine Zigbee instanz noch ein Koordinator am Pi5 -
@homoran said in FritzBox Zigbee Antenne in ioBroker einbinden?:
@searcher57 sagte in FritzBox Zigbee Antenne in ioBroker einbinden?:
Ich möchte aber die Zigbee Komonenten im Raspi 5 integrieren
und genau davon brauchen wir das iob diag!
da ist weder eine Zigbee instanz noch ein Koordinator am Pi5Nein, das habe ich doch geschrieben! Der Koordinator steckt im Raspi 4!
Das 2. iob diag ist vom Raspi 5, wie geschrieben. -
@searcher57 sagte in FritzBox Zigbee Antenne in ioBroker einbinden?:
das habe ich doch geschrieben!
ja! das wissen wir!
Aber das soll sich doch ändern und geht angeblich nicht.
Wie dollen wir dir helfen herauszufinden wo es dann klemmt, wenn wir keine entsprechenden Informationen über die nicht funktionierende Konfiguration bekommen? -
@searcher57 sagte in FritzBox Zigbee Antenne in ioBroker einbinden?:
@homoran said in FritzBox Zigbee Antenne in ioBroker einbinden?:
@searcher57 sagte in FritzBox Zigbee Antenne in ioBroker einbinden?:
Ich möchte aber die Zigbee Komonenten im Raspi 5 integrieren
und genau davon brauchen wir das iob diag!
da ist weder eine Zigbee instanz noch ein Koordinator am Pi5Nein, das habe ich doch geschrieben! Der Koordinator steckt im Raspi 4!
Das 2. iob diag ist vom Raspi 5, wie geschrieben.Das ist nicht das was benötigt wird. Also nochmal:
- Smartlesekopf anschliessen
- Koordinator anschliessen (am gleichen System)
iob diagausführen und hier posten.
Normalerweise gibt es keine Kollision zwischen der Aktivierung der seriellen Schnittstelle am GPIO und den seriellen Schnittstellen über USB.
A.
-
@asgothian said in FritzBox Zigbee Antenne in ioBroker einbinden?:
@searcher57 sagte in FritzBox Zigbee Antenne in ioBroker einbinden?:
@homoran said in FritzBox Zigbee Antenne in ioBroker einbinden?:
@searcher57 sagte in FritzBox Zigbee Antenne in ioBroker einbinden?:
Ich möchte aber die Zigbee Komonenten im Raspi 5 integrieren
und genau davon brauchen wir das iob diag!
da ist weder eine Zigbee instanz noch ein Koordinator am Pi5Nein, das habe ich doch geschrieben! Der Koordinator steckt im Raspi 4!
Das 2. iob diag ist vom Raspi 5, wie geschrieben.Das ist nicht das was benötigt wird. Also nochmal:
- Smartlesekopf anschliessen
- Koordinator anschliessen (am gleichen System)
iob diagausführen und hier posten.
Normalerweise gibt es keine Kollision zwischen der Aktivierung der seriellen Schnittstelle am GPIO und den seriellen Schnittstellen über USB.
A.
Ok, das habe ich missverstanden!
Der Koordinator ist im Raspi 5 und der Zigbee Adapter installiert.
Hier das Protokoll:
und hier das iob diag:
```bash Script v.2025-02-23 *** BASE SYSTEM *** Static hostname: Raspi58GB Icon name: computer Operating System: Debian GNU/Linux 12 (bookworm) Kernel: Linux 6.6.74+rpt-rpi-2712 Architecture: arm64 OS is similar to: Model : Raspberry Pi 5 Model B Rev 1.0 Docker : false Virtualization : none Kernel : aarch64 Userland : 64 bit Systemuptime and Load: 17:57:49 up 73 days, 2:37, 2 users, load average: 8.57, 7.54, 4.66 CPU threads: 4 *** LIFE CYCLE STATUS *** Operating System is the current Debian stable version codenamed 'bookworm'! *** RASPBERRY THROTTLING *** Current issues: No throttling issues detected. Previously detected issues: No throttling issues detected. *** TIME AND TIMEZONES *** Local time: Wed 2025-05-07 17:57:49 CEST Universal time: Wed 2025-05-07 15:57:49 UTC RTC time: Wed 2025-05-07 15:57:49 Time zone: Europe/Berlin (CEST, +0200) System clock synchronized: yes NTP service: active RTC in local TZ: no *** Users and Groups *** User that called 'iob diag': pi HOME=/home/pi GROUPS=pi adm dialout cdrom sudo audio video plugdev games users input render netdev gpio i2c spi iobroker User that is running 'js-controller': iobroker HOME=/home/iobroker GROUPS=iobroker tty dialout audio video plugdev bluetooth gpio i2c *** DISPLAY-SERVER SETUP *** Display-Server: false Desktop: Terminal: tty *** MEMORY *** total used free shared buff/cache available Mem: 8.4G 2.5G 1.7G 3.2M 4.3G 5.9G Swap: 209M 4.2M 205M Total: 8.7G 2.5G 1.9G Active iob-Instances: 31 8052 M total memory 2379 M used memory 3130 M active memory 2722 M inactive memory 1652 M free memory 172 M buffer memory 3947 M swap cache 199 M total swap 4 M used swap 195 M free swap *** top - Table Of Processes *** top - 17:57:49 up 73 days, 2:37, 2 users, load average: 8.57, 7.54, 4.66 Tasks: 203 total, 1 running, 202 sleeping, 0 stopped, 0 zombie %Cpu(s): 0.0 us, 0.0 sy, 0.0 ni,100.0 id, 0.0 wa, 0.0 hi, 0.0 si, 0.0 st MiB Mem : 8052.2 total, 1652.7 free, 2379.8 used, 4119.6 buff/cache MiB Swap: 200.0 total, 196.0 free, 4.0 used. 5672.4 avail Mem *** FAILED SERVICES *** UNIT LOAD ACTIVE SUB DESCRIPTION 0 loaded units listed. *** DMESG CRITICAL ERRORS *** 15 CRITICAL ERRORS DETECTED! Check 'sudo dmesg --level=emerg,alert,crit -T' for details *** FILESYSTEM *** Filesystem Type Size Used Avail Use% Mounted on udev devtmpfs 3.9G 0 3.9G 0% /dev tmpfs tmpfs 806M 5.4M 800M 1% /run /dev/mmcblk0p2 ext4 59G 12G 44G 21% / tmpfs tmpfs 4.0G 0 4.0G 0% /dev/shm tmpfs tmpfs 5.0M 48K 5.0M 1% /run/lock /dev/sda1 exfat 29G 7.1G 22G 25% /mnt/usb0 /dev/mmcblk0p1 vfat 510M 66M 445M 13% /boot/firmware tmpfs tmpfs 806M 0 806M 0% /run/user/1000 Messages concerning ext4 filesystem in dmesg: [Sun Feb 23 14:20:43 2025] Kernel command line: reboot=w coherent_pool=1M 8250.nr_uarts=1 pci=pcie_bus_safe cgroup_disable=memory numa_policy=interleave smsc95xx.macaddr=2C:CF:67:2F:A6:31 vc_mem.mem_base=0x3fc00000 vc_mem.mem_size=0x40000000 console=tty1 console=ttyAMA10,115200 root=PARTUUID=70767922-02 rootfstype=ext4 fsck.repair=yes rootwait [Sun Feb 23 14:20:47 2025] EXT4-fs (mmcblk0p2): mounted filesystem 56f80fa2-e005-4cca-86e6-19da1069914d ro with ordered data mode. Quota mode: none. [Sun Feb 23 14:20:51 2025] EXT4-fs (mmcblk0p2): re-mounted 56f80fa2-e005-4cca-86e6-19da1069914d r/w. Quota mode: none. Show mounted filesystems: TARGET SOURCE FSTYPE OPTIONS / /dev/mmcblk0p2 ext4 rw,noatime |-/mnt/usb0 /dev/sda1 exfat rw,relatime,fmask=0000,dmask=0000,allow_utime=0022,iocharset=utf8,errors=remount-ro `-/boot/firmware /dev/mmcblk0p1 vfat rw,relatime,fmask=0022,dmask=0022,codepage=437,iocharset=ascii,shortname=mixed,errors=remount-ro Files in neuralgic directories: /var: 1.6G /var/ 976M /var/log/journal/61b86e93a3bd4c4e97ff911079b6083e 976M /var/log/journal 976M /var/log 209M /var/cache Archived and active journals take up 975.3M in the file system. /opt/iobroker/backups: 320M /opt/iobroker/backups/ /opt/iobroker/iobroker-data: 1.4G /opt/iobroker/iobroker-data/ 1.2G /opt/iobroker/iobroker-data/files 617M /opt/iobroker/iobroker-data/files/javascript.admin 560M /opt/iobroker/iobroker-data/files/javascript.admin/static 558M /opt/iobroker/iobroker-data/files/javascript.admin/static/js The five largest files in iobroker-data are: 45M /opt/iobroker/iobroker-data/objects.jsonl 38M /opt/iobroker/iobroker-data/files/iot.admin/static/js/main.d3d286bd.js.map 35M /opt/iobroker/iobroker-data/files/devices.admin/static/js/main.24f2bb56.js.map 27M /opt/iobroker/iobroker-data/files/tankerkoenig.admin/build/index.js.map 26M /opt/iobroker/iobroker-data/files/echarts/static/js/main.41cee985.js.map USB-Devices by-id: USB-Sticks - Avoid direct links to /dev/tty* in your adapter setups, please always prefer the links 'by-id': /dev/serial/by-id/usb-ITead_Sonoff_Zigbee_3.0_USB_Dongle_Plus_0867d5d6b78ded11959b02f6b86ce6f8-if00-port0 *** ZigBee Settings *** Your zigbee.0 COM-Port is matching 'by-id'. Very good! Zigbee Network Settings on your coordinator/in nvbackup are: zigbee.X Extended Pan ID: *** MASKED *** Pan ID: *** MASKED *** Channel: *** MASKED *** Network Key: *** MASKED *** To unmask the settings run 'iob diag --unmask' *** NodeJS-Installation *** /usr/bin/nodejs v20.19.1 /usr/bin/node v20.19.1 /usr/bin/npm 10.8.2 /usr/bin/npx 10.8.2 /usr/bin/corepack 0.31.0 nodejs: Installed: 20.19.1-1nodesource1 Candidate: 20.19.1-1nodesource1 Version table: *** 20.19.1-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 100 /var/lib/dpkg/status 20.19.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.18.3-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.18.2-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.18.1-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.18.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.17.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.16.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.15.1-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.15.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.14.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.13.1-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.13.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.12.2-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.12.1-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.12.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.11.1-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.11.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.10.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.9.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.8.1-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.8.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.7.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.6.1-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.6.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.5.1-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.5.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.4.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.3.1-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.3.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.2.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.1.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.0.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 18.19.0+dfsg-6~deb12u2 500 500 http://deb.debian.org/debian bookworm/main arm64 Packages 18.19.0+dfsg-6~deb12u1 500 500 http://deb.debian.org/debian-security bookworm-security/main arm64 Packages Temp directories causing deletion problem: 0 No problems detected Errors in npm tree: 0 No problems detected *** ioBroker-Installation *** ioBroker Status iobroker is running on this host. Objects type: jsonl States type: jsonl Hosts: Raspi58GB Raspi58GB (version: 7.0.6, hostname: Raspi58GB , alive, uptime: 617) Core adapters versions js-controller: 7.0.6 admin: 7.6.3 javascript: 8.8.3 nodejs modules from github: 0 Adapter State + system.adapter.admin.0 : admin : Raspi58GB - enabled, port: 8081, bind: 0.0.0.0, run as: admin + system.adapter.alexa2.0 : alexa2 : Raspi58GB - enabled system.adapter.alias-manager.0 : alias-manager : Raspi58GB - disabled + system.adapter.awtrix-light.0 : awtrix-light : Raspi58GB - enabled + system.adapter.backitup.0 : backitup : Raspi58GB - enabled + system.adapter.broadlink2.0 : broadlink2 : Raspi58GB - enabled system.adapter.devices.0 : devices : Raspi58GB - disabled + system.adapter.discovery.0 : discovery : Raspi58GB - enabled + system.adapter.doorbird.0 : doorbird : Raspi58GB - enabled + system.adapter.echarts.0 : echarts : Raspi58GB - enabled + system.adapter.followthesun.0 : followthesun : Raspi58GB - enabled + system.adapter.fritzdect.0 : fritzdect : Raspi58GB - enabled + system.adapter.frontier_silicon.0 : frontier_silicon : Raspi58GB - enabled system.adapter.frontier_silicon.1 : frontier_silicon : Raspi58GB - disabled system.adapter.frontier_silicon.2 : frontier_silicon : Raspi58GB - disabled system.adapter.frontier_silicon.3 : frontier_silicon : Raspi58GB - disabled + system.adapter.hm-rega.0 : hm-rega : Raspi58GB - enabled + system.adapter.hm-rpc.0 : hm-rpc : Raspi58GB - enabled, port: 0 + system.adapter.hm-rpc.1 : hm-rpc : Raspi58GB - enabled, port: 0 + system.adapter.influxdb.0 : influxdb : Raspi58GB - enabled, port: 8086 + system.adapter.iot.0 : iot : Raspi58GB - enabled + system.adapter.javascript.0 : javascript : Raspi58GB - enabled + system.adapter.mqtt.0 : mqtt : Raspi58GB - enabled, port: 1883, bind: 0.0.0.0 system.adapter.openweathermap.0 : openweathermap : Raspi58GB - enabled + system.adapter.rpi2.0 : rpi2 : Raspi58GB - enabled + system.adapter.shelly.0 : shelly : Raspi58GB - enabled, port: 1882, bind: 0.0.0.0 + system.adapter.shelly.1 : shelly : Raspi58GB - enabled, port: 1882, bind: 0.0.0.0 + system.adapter.simple-api.0 : simple-api : Raspi58GB - enabled, port: 8087, bind: 0.0.0.0, run as: admin + system.adapter.smartmeter.0 : smartmeter : Raspi58GB - enabled + system.adapter.tankerkoenig.0 : tankerkoenig : Raspi58GB - enabled + system.adapter.telegram.0 : telegram : Raspi58GB - enabled, port: 8443, bind: 0.0.0.0 + system.adapter.text2command.0 : text2command : Raspi58GB - enabled + system.adapter.tr-064.0 : tr-064 : Raspi58GB - enabled + system.adapter.vis-2.0 : vis-2 : Raspi58GB - enabled + system.adapter.web.0 : web : Raspi58GB - enabled, port: 8082, bind: 0.0.0.0, run as: admin system.adapter.yr.0 : yr : Raspi58GB - enabled + system.adapter.zigbee.0 : zigbee : Raspi58GB - enabled, port: /dev/serial/by-id/usb-ITead_Sonoff_Zigbee_3.0_USB_Dongle_Plus_0867d5d6b78ded11959b02f6b86ce6f8-if00-port0 + instance is alive Enabled adapters with bindings + system.adapter.admin.0 : admin : Raspi58GB - enabled, port: 8081, bind: 0.0.0.0, run as: admin + system.adapter.hm-rpc.0 : hm-rpc : Raspi58GB - enabled, port: 0 + system.adapter.hm-rpc.1 : hm-rpc : Raspi58GB - enabled, port: 0 + system.adapter.influxdb.0 : influxdb : Raspi58GB - enabled, port: 8086 + system.adapter.mqtt.0 : mqtt : Raspi58GB - enabled, port: 1883, bind: 0.0.0.0 + system.adapter.shelly.0 : shelly : Raspi58GB - enabled, port: 1882, bind: 0.0.0.0 + system.adapter.shelly.1 : shelly : Raspi58GB - enabled, port: 1882, bind: 0.0.0.0 + system.adapter.simple-api.0 : simple-api : Raspi58GB - enabled, port: 8087, bind: 0.0.0.0, run as: admin + system.adapter.telegram.0 : telegram : Raspi58GB - enabled, port: 8443, bind: 0.0.0.0 + system.adapter.web.0 : web : Raspi58GB - enabled, port: 8082, bind: 0.0.0.0, run as: admin + system.adapter.zigbee.0 : zigbee : Raspi58GB - enabled, port: /dev/serial/by-id/usb-ITead_Sonoff_Zigbee_3.0_USB_Dongle_Plus_0867d5d6b78ded11959b02f6b86ce6f8-if00-port0 ioBroker-Repositories ┌─────────┬──────────┬─────────────────────────────────────────────────────────┬──────────────┐ │ (index) │ name │ url │ auto upgrade │ ├─────────┼──────────┼─────────────────────────────────────────────────────────┼──────────────┤ │ 0 │ 'stable' │ 'http://download.iobroker.net/sources-dist.json' │ false │ │ 1 │ 'beta' │ 'http://download.iobroker.net/sources-dist-latest.json' │ false │ └─────────┴──────────┴─────────────────────────────────────────────────────────┴──────────────┘ Active repo(s): stable Upgrade policy: none Installed ioBroker-Adapters Used repository: stable Adapter "admin" : 7.6.3 , installed 7.6.3 Adapter "alexa2" : 3.26.5 , installed 3.26.5 Adapter "alias-manager": 2.0.0 , installed 2.0.0 Adapter "awtrix-light" : 1.7.0 , installed 1.7.0 Adapter "backitup" : 3.0.31 , installed 3.0.31 Adapter "broadlink2" : 2.3.0 , installed 2.3.0 Adapter "devices" : 1.1.5 , installed 1.1.5 Adapter "discovery" : 5.0.0 , installed 5.0.0 Adapter "doorbird" : 3.0.0 , installed 3.0.0 Adapter "echarts" : 1.9.2 , installed 1.9.2 Adapter "followthesun" : 0.5.2 , installed 0.5.2 Adapter "fritzdect" : 2.6.1 , installed 2.6.1 Adapter "frontier_silicon": 0.4.0 , installed 0.4.0 Adapter "hm-rega" : 5.1.0 , installed 5.1.0 Adapter "hm-rpc" : 2.0.2 , installed 2.0.2 Adapter "influxdb" : 4.0.2 , installed 4.0.2 Adapter "iot" : 3.3.0 , installed 3.3.0 Adapter "javascript" : 8.8.3 , installed 8.8.3 Controller "js-controller": 7.0.6 , installed 7.0.6 Adapter "mqtt" : 6.1.2 , installed 6.1.2 Adapter "openweathermap": 1.1.2 , installed 1.1.2 Adapter "rpi2" : 2.4.0 , installed 2.4.0 Adapter "shelly" : 9.2.0 , installed 9.2.0 Adapter "simple-api" : 2.8.0 , installed 2.8.0 Adapter "smartmeter" : 3.4.0 , installed 3.4.0 Adapter "socketio" : 6.7.1 , installed 7.0.8 Adapter "tankerkoenig" : 3.4.0 , installed 3.4.0 Adapter "telegram" : 4.1.0 , installed 4.1.0 Adapter "text2command" : 3.0.3 , installed 3.0.3 Adapter "tr-064" : 4.3.0 , installed 4.3.0 Adapter "vis-2" : 2.9.64 , installed 2.9.64 Adapter "web" : 7.0.8 , installed 7.0.8 Adapter "ws" : 2.6.2 , installed 3.0.19 Adapter "yr" : 5.3.0 , installed 5.3.0 Adapter "zigbee" : 2.0.5 , installed 2.0.5 Objects and States Please stand by - This may take a while Objects: 13162 States: 10572 *** OS-Repositories and Updates *** Hit:1 http://archive.raspberrypi.com/debian bookworm InRelease Hit:2 http://deb.debian.org/debian bookworm InRelease Hit:3 https://repos.influxdata.com/debian stable InRelease Hit:4 http://deb.debian.org/debian-security bookworm-security InRelease Hit:5 http://deb.debian.org/debian bookworm-updates InRelease Hit:6 https://deb.nodesource.com/node_20.x nodistro InRelease Hit:7 https://repo.mosquitto.org/debian bookworm InRelease Reading package lists... Pending Updates: 0 *** Listening Ports *** Active Internet connections (only servers) Proto Recv-Q Send-Q Local Address Foreign Address State User Inode PID/Program name tcp 0 0 192.168.178.57:8100 0.0.0.0:* LISTEN 1001 87504063 2716534/io.doorbird tcp 0 0 0.0.0.0:1883 0.0.0.0:* LISTEN 106 3863 805/mosquitto tcp 0 0 0.0.0.0:1882 0.0.0.0:* LISTEN 1001 87503125 2716414/io.shelly.1 tcp 0 0 192.168.178.57:2001 0.0.0.0:* LISTEN 1001 87501406 2716309/io.hm-rpc.1 tcp 0 0 192.168.178.57:42010 0.0.0.0:* LISTEN 1001 87502285 2716294/io.hm-rpc.0 tcp 0 0 0.0.0.0:9001 0.0.0.0:* LISTEN 1001 87499606 2716080/iobroker.js tcp 0 0 0.0.0.0:9000 0.0.0.0:* LISTEN 1001 87499611 2716080/iobroker.js tcp 0 0 0.0.0.0:22 0.0.0.0:* LISTEN 0 6088 809/sshd: /usr/sbin tcp6 0 0 :::8081 :::* LISTEN 1001 87501150 2716101/io.admin.0 tcp6 0 0 :::8082 :::* LISTEN 1001 87502788 2716693/io.web.0 tcp6 0 0 :::8087 :::* LISTEN 1001 87502670 2716611/io.simple-a tcp6 0 0 :::8086 :::* LISTEN 999 9328 860/influxd tcp6 0 0 :::1883 :::* LISTEN 106 3864 805/mosquitto tcp6 0 0 :::22 :::* LISTEN 0 6090 809/sshd: /usr/sbin udp 0 0 0.0.0.0:5683 0.0.0.0:* 1001 87503085 2716395/io.shelly.0 udp 0 0 0.0.0.0:58972 0.0.0.0:* 1001 87500552 2716239/io.broadlin udp 0 0 0.0.0.0:38548 0.0.0.0:* 1001 87500551 2716239/io.broadlin udp 0 0 0.0.0.0:34567 0.0.0.0:* 1001 87502211 2716239/io.broadlin udp 0 0 0.0.0.0:55464 0.0.0.0:* 1001 87502212 2716239/io.broadlin udp 0 0 0.0.0.0:15001 0.0.0.0:* 1001 87502942 2716239/io.broadlin udp 0 0 0.0.0.0:39665 0.0.0.0:* 1001 87500549 2716239/io.broadlin udp 0 0 0.0.0.0:47959 0.0.0.0:* 1001 87502209 2716239/io.broadlin udp 0 0 0.0.0.0:39974 0.0.0.0:* 1001 87500550 2716239/io.broadlin udp 0 0 0.0.0.0:48451 0.0.0.0:* 1001 87502214 2716239/io.broadlin udp 0 0 0.0.0.0:48497 0.0.0.0:* 104 5966 691/avahi-daemon: r udp 0 0 0.0.0.0:44688 0.0.0.0:* 1001 87500565 2716239/io.broadlin udp 0 0 0.0.0.0:33290 0.0.0.0:* 1001 87502213 2716239/io.broadlin udp 0 0 0.0.0.0:49753 0.0.0.0:* 1001 87502210 2716239/io.broadlin udp 0 0 0.0.0.0:5353 0.0.0.0:* 104 5964 691/avahi-daemon: r udp6 0 0 :::39826 :::* 104 5967 691/avahi-daemon: r udp6 0 0 fe80::2ca:bf0f:5188:546 :::* 0 54293794 1668473/NetworkMana udp6 0 0 :::5353 :::* 104 5965 691/avahi-daemon: r *** Log File - Last 25 Lines *** 2025-05-07 17:50:12.936 - info: zigbee.0 (2716711) cleaned everything up... 2025-05-07 17:50:12.937 - info: zigbee.0 (2716711) local config saved 2025-05-07 17:50:12.938 - info: zigbee.0 (2716711) Saved local configuration data 2025-05-07 17:50:12.939 - info: zigbee.0 (2716711) terminating 2025-05-07 17:50:12.940 - info: zigbee.0 (2716711) Terminated (ADAPTER_REQUESTED_TERMINATION): Without reason 2025-05-07 17:50:12.987 - error: zigbee.0 (2716711) Failed to open the network: TypeError: Cannot read properties of undefined (reading 'permitJoin') at Controller.permitJoin (/opt/iobroker/node_modules/zigbee-herdsman/src/controller/controller.ts:315:35) at ZigbeeController.permitJoin (/opt/iobroker/node_modules/iobroker.zigbee/lib/zigbeecontroller.js:659:33) at ZigbeeController.stop (/opt/iobroker/node_modules/iobroker.zigbee/lib/zigbeecontroller.js:634:24) at processTicksAndRejections (node:internal/process/task_queues:95:5) at Zigbee.onUnload (/opt/iobroker/node_modules/iobroker.zigbee/main.js:1037:17) 2025-05-07 17:50:12.988 - warn: zigbee.0 (2716711) Failed to stop zigbee during startup 2025-05-07 17:50:12.988 - info: zigbee.0 (2716711) terminating 2025-05-07 17:50:13.008 - info: host.Raspi58GB stopInstance system.adapter.zigbee.0 send kill signal 2025-05-07 17:50:13.441 - info: zigbee.0 (2716711) terminating 2025-05-07 17:50:13.485 - info: host.Raspi58GB instance system.adapter.zigbee.0 terminated with code 11 (ADAPTER_REQUESTED_TERMINATION) 2025-05-07 17:50:16.818 - info: host.Raspi58GB instance system.adapter.zigbee.0 in version "2.0.5" started with pid 2716727 2025-05-07 17:50:17.959 - info: zigbee.0 (2716727) starting. Version 2.0.5 in /opt/iobroker/node_modules/iobroker.zigbee, node: v20.19.1, js-controller: 7.0.6 2025-05-07 17:50:17.969 - info: zigbee.0 (2716727) init localConfig 2025-05-07 17:50:17.972 - info: zigbee.0 (2716727) --> transmitPower : normal 2025-05-07 17:50:17.977 - info: zigbee.0 (2716727) --- creating device debug --- 2025-05-07 17:50:17.978 - info: zigbee.0 (2716727) Starting Adapter npm ... 2025-05-07 17:50:17.994 - info: zigbee.0 (2716727) Installed Version: iobroker.zigbee@2.0.5 (Converters 23.6.0 Herdsman 3.5.2) 2025-05-07 17:50:17.995 - info: zigbee.0 (2716727) Starting Zigbee-Herdsman 2025-05-07 17:53:36.342 - info: smartmeter.0 (2716443) Received 13 values, 6 updatedSorry nein das hier ist das diag:Script v.2025-02-23 *** BASE SYSTEM *** Static hostname: Raspi58GB Icon name: computer Operating System: Debian GNU/Linux 12 (bookworm) Kernel: Linux 6.6.74+rpt-rpi-2712 Architecture: arm64 OS is similar to: Model : Raspberry Pi 5 Model B Rev 1.0 Docker : false Virtualization : none Kernel : aarch64 Userland : 64 bit Systemuptime and Load: 17:57:49 up 73 days, 2:37, 2 users, load average: 8.57, 7.54, 4.66 CPU threads: 4 *** LIFE CYCLE STATUS *** Operating System is the current Debian stable version codenamed 'bookworm'! *** RASPBERRY THROTTLING *** Current issues: No throttling issues detected. Previously detected issues: No throttling issues detected. *** TIME AND TIMEZONES *** Local time: Wed 2025-05-07 17:57:49 CEST Universal time: Wed 2025-05-07 15:57:49 UTC RTC time: Wed 2025-05-07 15:57:49 Time zone: Europe/Berlin (CEST, +0200) System clock synchronized: yes NTP service: active RTC in local TZ: no *** Users and Groups *** User that called 'iob diag': pi HOME=/home/pi GROUPS=pi adm dialout cdrom sudo audio video plugdev games users input render netdev gpio i2c spi iobroker User that is running 'js-controller': iobroker HOME=/home/iobroker GROUPS=iobroker tty dialout audio video plugdev bluetooth gpio i2c *** DISPLAY-SERVER SETUP *** Display-Server: false Desktop: Terminal: tty *** MEMORY *** total used free shared buff/cache available Mem: 8.4G 2.5G 1.7G 3.2M 4.3G 5.9G Swap: 209M 4.2M 205M Total: 8.7G 2.5G 1.9G Active iob-Instances: 31 8052 M total memory 2379 M used memory 3130 M active memory 2722 M inactive memory 1652 M free memory 172 M buffer memory 3947 M swap cache 199 M total swap 4 M used swap 195 M free swap *** top - Table Of Processes *** top - 17:57:49 up 73 days, 2:37, 2 users, load average: 8.57, 7.54, 4.66 Tasks: 203 total, 1 running, 202 sleeping, 0 stopped, 0 zombie %Cpu(s): 0.0 us, 0.0 sy, 0.0 ni,100.0 id, 0.0 wa, 0.0 hi, 0.0 si, 0.0 st MiB Mem : 8052.2 total, 1652.7 free, 2379.8 used, 4119.6 buff/cache MiB Swap: 200.0 total, 196.0 free, 4.0 used. 5672.4 avail Mem *** FAILED SERVICES *** UNIT LOAD ACTIVE SUB DESCRIPTION 0 loaded units listed. *** DMESG CRITICAL ERRORS *** 15 CRITICAL ERRORS DETECTED! Check 'sudo dmesg --level=emerg,alert,crit -T' for details *** FILESYSTEM *** Filesystem Type Size Used Avail Use% Mounted on udev devtmpfs 3.9G 0 3.9G 0% /dev tmpfs tmpfs 806M 5.4M 800M 1% /run /dev/mmcblk0p2 ext4 59G 12G 44G 21% / tmpfs tmpfs 4.0G 0 4.0G 0% /dev/shm tmpfs tmpfs 5.0M 48K 5.0M 1% /run/lock /dev/sda1 exfat 29G 7.1G 22G 25% /mnt/usb0 /dev/mmcblk0p1 vfat 510M 66M 445M 13% /boot/firmware tmpfs tmpfs 806M 0 806M 0% /run/user/1000 Messages concerning ext4 filesystem in dmesg: [Sun Feb 23 14:20:43 2025] Kernel command line: reboot=w coherent_pool=1M 8250.nr_uarts=1 pci=pcie_bus_safe cgroup_disable=memory numa_policy=interleave smsc95xx.macaddr=2C:CF:67:2F:A6:31 vc_mem.mem_base=0x3fc00000 vc_mem.mem_size=0x40000000 console=tty1 console=ttyAMA10,115200 root=PARTUUID=70767922-02 rootfstype=ext4 fsck.repair=yes rootwait [Sun Feb 23 14:20:47 2025] EXT4-fs (mmcblk0p2): mounted filesystem 56f80fa2-e005-4cca-86e6-19da1069914d ro with ordered data mode. Quota mode: none. [Sun Feb 23 14:20:51 2025] EXT4-fs (mmcblk0p2): re-mounted 56f80fa2-e005-4cca-86e6-19da1069914d r/w. Quota mode: none. Show mounted filesystems: TARGET SOURCE FSTYPE OPTIONS / /dev/mmcblk0p2 ext4 rw,noatime |-/mnt/usb0 /dev/sda1 exfat rw,relatime,fmask=0000,dmask=0000,allow_utime=0022,iocharset=utf8,errors=remount-ro `-/boot/firmware /dev/mmcblk0p1 vfat rw,relatime,fmask=0022,dmask=0022,codepage=437,iocharset=ascii,shortname=mixed,errors=remount-ro Files in neuralgic directories: /var: 1.6G /var/ 976M /var/log/journal/61b86e93a3bd4c4e97ff911079b6083e 976M /var/log/journal 976M /var/log 209M /var/cache Archived and active journals take up 975.3M in the file system. /opt/iobroker/backups: 320M /opt/iobroker/backups/ /opt/iobroker/iobroker-data: 1.4G /opt/iobroker/iobroker-data/ 1.2G /opt/iobroker/iobroker-data/files 617M /opt/iobroker/iobroker-data/files/javascript.admin 560M /opt/iobroker/iobroker-data/files/javascript.admin/static 558M /opt/iobroker/iobroker-data/files/javascript.admin/static/js The five largest files in iobroker-data are: 45M /opt/iobroker/iobroker-data/objects.jsonl 38M /opt/iobroker/iobroker-data/files/iot.admin/static/js/main.d3d286bd.js.map 35M /opt/iobroker/iobroker-data/files/devices.admin/static/js/main.24f2bb56.js.map 27M /opt/iobroker/iobroker-data/files/tankerkoenig.admin/build/index.js.map 26M /opt/iobroker/iobroker-data/files/echarts/static/js/main.41cee985.js.map USB-Devices by-id: USB-Sticks - Avoid direct links to /dev/tty* in your adapter setups, please always prefer the links 'by-id': /dev/serial/by-id/usb-ITead_Sonoff_Zigbee_3.0_USB_Dongle_Plus_0867d5d6b78ded11959b02f6b86ce6f8-if00-port0 *** ZigBee Settings *** Your zigbee.0 COM-Port is matching 'by-id'. Very good! Zigbee Network Settings on your coordinator/in nvbackup are: zigbee.X Extended Pan ID: *** MASKED *** Pan ID: *** MASKED *** Channel: *** MASKED *** Network Key: *** MASKED *** To unmask the settings run 'iob diag --unmask' *** NodeJS-Installation *** /usr/bin/nodejs v20.19.1 /usr/bin/node v20.19.1 /usr/bin/npm 10.8.2 /usr/bin/npx 10.8.2 /usr/bin/corepack 0.31.0 nodejs: Installed: 20.19.1-1nodesource1 Candidate: 20.19.1-1nodesource1 Version table: *** 20.19.1-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 100 /var/lib/dpkg/status 20.19.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.18.3-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.18.2-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.18.1-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.18.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.17.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.16.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.15.1-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.15.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.14.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.13.1-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.13.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.12.2-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.12.1-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.12.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.11.1-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.11.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.10.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.9.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.8.1-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.8.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.7.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.6.1-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.6.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.5.1-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.5.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.4.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.3.1-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.3.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.2.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.1.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.0.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 18.19.0+dfsg-6~deb12u2 500 500 http://deb.debian.org/debian bookworm/main arm64 Packages 18.19.0+dfsg-6~deb12u1 500 500 http://deb.debian.org/debian-security bookworm-security/main arm64 Packages Temp directories causing deletion problem: 0 No problems detected Errors in npm tree: 0 No problems detected *** ioBroker-Installation *** ioBroker Status iobroker is running on this host. Objects type: jsonl States type: jsonl Hosts: Raspi58GB Raspi58GB (version: 7.0.6, hostname: Raspi58GB , alive, uptime: 617) Core adapters versions js-controller: 7.0.6 admin: 7.6.3 javascript: 8.8.3 nodejs modules from github: 0 Adapter State + system.adapter.admin.0 : admin : Raspi58GB - enabled, port: 8081, bind: 0.0.0.0, run as: admin + system.adapter.alexa2.0 : alexa2 : Raspi58GB - enabled system.adapter.alias-manager.0 : alias-manager : Raspi58GB - disabled + system.adapter.awtrix-light.0 : awtrix-light : Raspi58GB - enabled + system.adapter.backitup.0 : backitup : Raspi58GB - enabled + system.adapter.broadlink2.0 : broadlink2 : Raspi58GB - enabled system.adapter.devices.0 : devices : Raspi58GB - disabled + system.adapter.discovery.0 : discovery : Raspi58GB - enabled + system.adapter.doorbird.0 : doorbird : Raspi58GB - enabled + system.adapter.echarts.0 : echarts : Raspi58GB - enabled + system.adapter.followthesun.0 : followthesun : Raspi58GB - enabled + system.adapter.fritzdect.0 : fritzdect : Raspi58GB - enabled + system.adapter.frontier_silicon.0 : frontier_silicon : Raspi58GB - enabled system.adapter.frontier_silicon.1 : frontier_silicon : Raspi58GB - disabled system.adapter.frontier_silicon.2 : frontier_silicon : Raspi58GB - disabled system.adapter.frontier_silicon.3 : frontier_silicon : Raspi58GB - disabled + system.adapter.hm-rega.0 : hm-rega : Raspi58GB - enabled + system.adapter.hm-rpc.0 : hm-rpc : Raspi58GB - enabled, port: 0 + system.adapter.hm-rpc.1 : hm-rpc : Raspi58GB - enabled, port: 0 + system.adapter.influxdb.0 : influxdb : Raspi58GB - enabled, port: 8086 + system.adapter.iot.0 : iot : Raspi58GB - enabled + system.adapter.javascript.0 : javascript : Raspi58GB - enabled + system.adapter.mqtt.0 : mqtt : Raspi58GB - enabled, port: 1883, bind: 0.0.0.0 system.adapter.openweathermap.0 : openweathermap : Raspi58GB - enabled + system.adapter.rpi2.0 : rpi2 : Raspi58GB - enabled + system.adapter.shelly.0 : shelly : Raspi58GB - enabled, port: 1882, bind: 0.0.0.0 + system.adapter.shelly.1 : shelly : Raspi58GB - enabled, port: 1882, bind: 0.0.0.0 + system.adapter.simple-api.0 : simple-api : Raspi58GB - enabled, port: 8087, bind: 0.0.0.0, run as: admin + system.adapter.smartmeter.0 : smartmeter : Raspi58GB - enabled + system.adapter.tankerkoenig.0 : tankerkoenig : Raspi58GB - enabled + system.adapter.telegram.0 : telegram : Raspi58GB - enabled, port: 8443, bind: 0.0.0.0 + system.adapter.text2command.0 : text2command : Raspi58GB - enabled + system.adapter.tr-064.0 : tr-064 : Raspi58GB - enabled + system.adapter.vis-2.0 : vis-2 : Raspi58GB - enabled + system.adapter.web.0 : web : Raspi58GB - enabled, port: 8082, bind: 0.0.0.0, run as: admin system.adapter.yr.0 : yr : Raspi58GB - enabled + system.adapter.zigbee.0 : zigbee : Raspi58GB - enabled, port: /dev/serial/by-id/usb-ITead_Sonoff_Zigbee_3.0_USB_Dongle_Plus_0867d5d6b78ded11959b02f6b86ce6f8-if00-port0 + instance is alive Enabled adapters with bindings + system.adapter.admin.0 : admin : Raspi58GB - enabled, port: 8081, bind: 0.0.0.0, run as: admin + system.adapter.hm-rpc.0 : hm-rpc : Raspi58GB - enabled, port: 0 + system.adapter.hm-rpc.1 : hm-rpc : Raspi58GB - enabled, port: 0 + system.adapter.influxdb.0 : influxdb : Raspi58GB - enabled, port: 8086 + system.adapter.mqtt.0 : mqtt : Raspi58GB - enabled, port: 1883, bind: 0.0.0.0 + system.adapter.shelly.0 : shelly : Raspi58GB - enabled, port: 1882, bind: 0.0.0.0 + system.adapter.shelly.1 : shelly : Raspi58GB - enabled, port: 1882, bind: 0.0.0.0 + system.adapter.simple-api.0 : simple-api : Raspi58GB - enabled, port: 8087, bind: 0.0.0.0, run as: admin + system.adapter.telegram.0 : telegram : Raspi58GB - enabled, port: 8443, bind: 0.0.0.0 + system.adapter.web.0 : web : Raspi58GB - enabled, port: 8082, bind: 0.0.0.0, run as: admin + system.adapter.zigbee.0 : zigbee : Raspi58GB - enabled, port: /dev/serial/by-id/usb-ITead_Sonoff_Zigbee_3.0_USB_Dongle_Plus_0867d5d6b78ded11959b02f6b86ce6f8-if00-port0 ioBroker-Repositories ┌─────────┬──────────┬─────────────────────────────────────────────────────────┬──────────────┐ │ (index) │ name │ url │ auto upgrade │ ├─────────┼──────────┼─────────────────────────────────────────────────────────┼──────────────┤ │ 0 │ 'stable' │ 'http://download.iobroker.net/sources-dist.json' │ false │ │ 1 │ 'beta' │ 'http://download.iobroker.net/sources-dist-latest.json' │ false │ └─────────┴──────────┴─────────────────────────────────────────────────────────┴──────────────┘ Active repo(s): stable Upgrade policy: none Installed ioBroker-Adapters Used repository: stable Adapter "admin" : 7.6.3 , installed 7.6.3 Adapter "alexa2" : 3.26.5 , installed 3.26.5 Adapter "alias-manager": 2.0.0 , installed 2.0.0 Adapter "awtrix-light" : 1.7.0 , installed 1.7.0 Adapter "backitup" : 3.0.31 , installed 3.0.31 Adapter "broadlink2" : 2.3.0 , installed 2.3.0 Adapter "devices" : 1.1.5 , installed 1.1.5 Adapter "discovery" : 5.0.0 , installed 5.0.0 Adapter "doorbird" : 3.0.0 , installed 3.0.0 Adapter "echarts" : 1.9.2 , installed 1.9.2 Adapter "followthesun" : 0.5.2 , installed 0.5.2 Adapter "fritzdect" : 2.6.1 , installed 2.6.1 Adapter "frontier_silicon": 0.4.0 , installed 0.4.0 Adapter "hm-rega" : 5.1.0 , installed 5.1.0 Adapter "hm-rpc" : 2.0.2 , installed 2.0.2 Adapter "influxdb" : 4.0.2 , installed 4.0.2 Adapter "iot" : 3.3.0 , installed 3.3.0 Adapter "javascript" : 8.8.3 , installed 8.8.3 Controller "js-controller": 7.0.6 , installed 7.0.6 Adapter "mqtt" : 6.1.2 , installed 6.1.2 Adapter "openweathermap": 1.1.2 , installed 1.1.2 Adapter "rpi2" : 2.4.0 , installed 2.4.0 Adapter "shelly" : 9.2.0 , installed 9.2.0 Adapter "simple-api" : 2.8.0 , installed 2.8.0 Adapter "smartmeter" : 3.4.0 , installed 3.4.0 Adapter "socketio" : 6.7.1 , installed 7.0.8 Adapter "tankerkoenig" : 3.4.0 , installed 3.4.0 Adapter "telegram" : 4.1.0 , installed 4.1.0 Adapter "text2command" : 3.0.3 , installed 3.0.3 Adapter "tr-064" : 4.3.0 , installed 4.3.0 Adapter "vis-2" : 2.9.64 , installed 2.9.64 Adapter "web" : 7.0.8 , installed 7.0.8 Adapter "ws" : 2.6.2 , installed 3.0.19 Adapter "yr" : 5.3.0 , installed 5.3.0 Adapter "zigbee" : 2.0.5 , installed 2.0.5 Objects and States Please stand by - This may take a while Objects: 13162 States: 10572 *** OS-Repositories and Updates *** Hit:1 http://archive.raspberrypi.com/debian bookworm InRelease Hit:2 http://deb.debian.org/debian bookworm InRelease Hit:3 https://repos.influxdata.com/debian stable InRelease Hit:4 http://deb.debian.org/debian-security bookworm-security InRelease Hit:5 http://deb.debian.org/debian bookworm-updates InRelease Hit:6 https://deb.nodesource.com/node_20.x nodistro InRelease Hit:7 https://repo.mosquitto.org/debian bookworm InRelease Reading package lists... Pending Updates: 0 *** Listening Ports *** Active Internet connections (only servers) Proto Recv-Q Send-Q Local Address Foreign Address State User Inode PID/Program name tcp 0 0 192.168.178.57:8100 0.0.0.0:* LISTEN 1001 87504063 2716534/io.doorbird tcp 0 0 0.0.0.0:1883 0.0.0.0:* LISTEN 106 3863 805/mosquitto tcp 0 0 0.0.0.0:1882 0.0.0.0:* LISTEN 1001 87503125 2716414/io.shelly.1 tcp 0 0 192.168.178.57:2001 0.0.0.0:* LISTEN 1001 87501406 2716309/io.hm-rpc.1 tcp 0 0 192.168.178.57:42010 0.0.0.0:* LISTEN 1001 87502285 2716294/io.hm-rpc.0 tcp 0 0 0.0.0.0:9001 0.0.0.0:* LISTEN 1001 87499606 2716080/iobroker.js tcp 0 0 0.0.0.0:9000 0.0.0.0:* LISTEN 1001 87499611 2716080/iobroker.js tcp 0 0 0.0.0.0:22 0.0.0.0:* LISTEN 0 6088 809/sshd: /usr/sbin tcp6 0 0 :::8081 :::* LISTEN 1001 87501150 2716101/io.admin.0 tcp6 0 0 :::8082 :::* LISTEN 1001 87502788 2716693/io.web.0 tcp6 0 0 :::8087 :::* LISTEN 1001 87502670 2716611/io.simple-a tcp6 0 0 :::8086 :::* LISTEN 999 9328 860/influxd tcp6 0 0 :::1883 :::* LISTEN 106 3864 805/mosquitto tcp6 0 0 :::22 :::* LISTEN 0 6090 809/sshd: /usr/sbin udp 0 0 0.0.0.0:5683 0.0.0.0:* 1001 87503085 2716395/io.shelly.0 udp 0 0 0.0.0.0:58972 0.0.0.0:* 1001 87500552 2716239/io.broadlin udp 0 0 0.0.0.0:38548 0.0.0.0:* 1001 87500551 2716239/io.broadlin udp 0 0 0.0.0.0:34567 0.0.0.0:* 1001 87502211 2716239/io.broadlin udp 0 0 0.0.0.0:55464 0.0.0.0:* 1001 87502212 2716239/io.broadlin udp 0 0 0.0.0.0:15001 0.0.0.0:* 1001 87502942 2716239/io.broadlin udp 0 0 0.0.0.0:39665 0.0.0.0:* 1001 87500549 2716239/io.broadlin udp 0 0 0.0.0.0:47959 0.0.0.0:* 1001 87502209 2716239/io.broadlin udp 0 0 0.0.0.0:39974 0.0.0.0:* 1001 87500550 2716239/io.broadlin udp 0 0 0.0.0.0:48451 0.0.0.0:* 1001 87502214 2716239/io.broadlin udp 0 0 0.0.0.0:48497 0.0.0.0:* 104 5966 691/avahi-daemon: r udp 0 0 0.0.0.0:44688 0.0.0.0:* 1001 87500565 2716239/io.broadlin udp 0 0 0.0.0.0:33290 0.0.0.0:* 1001 87502213 2716239/io.broadlin udp 0 0 0.0.0.0:49753 0.0.0.0:* 1001 87502210 2716239/io.broadlin udp 0 0 0.0.0.0:5353 0.0.0.0:* 104 5964 691/avahi-daemon: r udp6 0 0 :::39826 :::* 104 5967 691/avahi-daemon: r udp6 0 0 fe80::2ca:bf0f:5188:546 :::* 0 54293794 1668473/NetworkMana udp6 0 0 :::5353 :::* 104 5965 691/avahi-daemon: r *** Log File - Last 25 Lines *** 2025-05-07 17:50:12.936 - info: zigbee.0 (2716711) cleaned everything up... 2025-05-07 17:50:12.937 - info: zigbee.0 (2716711) local config saved 2025-05-07 17:50:12.938 - info: zigbee.0 (2716711) Saved local configuration data 2025-05-07 17:50:12.939 - info: zigbee.0 (2716711) terminating 2025-05-07 17:50:12.940 - info: zigbee.0 (2716711) Terminated (ADAPTER_REQUESTED_TERMINATION): Without reason 2025-05-07 17:50:12.987 - error: zigbee.0 (2716711) Failed to open the network: TypeError: Cannot read properties of undefined (reading 'permitJoin') at Controller.permitJoin (/opt/iobroker/node_modules/zigbee-herdsman/src/controller/controller.ts:315:35) at ZigbeeController.permitJoin (/opt/iobroker/node_modules/iobroker.zigbee/lib/zigbeecontroller.js:659:33) at ZigbeeController.stop (/opt/iobroker/node_modules/iobroker.zigbee/lib/zigbeecontroller.js:634:24) at processTicksAndRejections (node:internal/process/task_queues:95:5) at Zigbee.onUnload (/opt/iobroker/node_modules/iobroker.zigbee/main.js:1037:17) 2025-05-07 17:50:12.988 - warn: zigbee.0 (2716711) Failed to stop zigbee during startup 2025-05-07 17:50:12.988 - info: zigbee.0 (2716711) terminating 2025-05-07 17:50:13.008 - info: host.Raspi58GB stopInstance system.adapter.zigbee.0 send kill signal 2025-05-07 17:50:13.441 - info: zigbee.0 (2716711) terminating 2025-05-07 17:50:13.485 - info: host.Raspi58GB instance system.adapter.zigbee.0 terminated with code 11 (ADAPTER_REQUESTED_TERMINATION) 2025-05-07 17:50:16.818 - info: host.Raspi58GB instance system.adapter.zigbee.0 in version "2.0.5" started with pid 2716727 2025-05-07 17:50:17.959 - info: zigbee.0 (2716727) starting. Version 2.0.5 in /opt/iobroker/node_modules/iobroker.zigbee, node: v20.19.1, js-controller: 7.0.6 2025-05-07 17:50:17.969 - info: zigbee.0 (2716727) init localConfig 2025-05-07 17:50:17.972 - info: zigbee.0 (2716727) --> transmitPower : normal 2025-05-07 17:50:17.977 - info: zigbee.0 (2716727) --- creating device debug --- 2025-05-07 17:50:17.978 - info: zigbee.0 (2716727) Starting Adapter npm ... 2025-05-07 17:50:17.994 - info: zigbee.0 (2716727) Installed Version: iobroker.zigbee@2.0.5 (Converters 23.6.0 Herdsman 3.5.2) 2025-05-07 17:50:17.995 - info: zigbee.0 (2716727) Starting Zigbee-Herdsman 2025-05-07 17:53:36.342 - info: smartmeter.0 (2716443) Received 13 values, 6 updated -
@searcher57 sagte in FritzBox Zigbee Antenne in ioBroker einbinden?:
Hier das Protokoll:
bitte keinen Screenshot!
als Text in code-tags posten. -
@homoran said in FritzBox Zigbee Antenne in ioBroker einbinden?:
@searcher57 sagte in FritzBox Zigbee Antenne in ioBroker einbinden?:
Hier das Protokoll:
bitte keinen Screenshot!
als Text in code-tags posten.Bitte erkläre das!
-
@searcher57 sagte in FritzBox Zigbee Antenne in ioBroker einbinden?:
Bitte erkläre das!
Jetzt bin ich überfordert, was genau bedarf zusätzlicher Erklärung?
-
@searcher57 said in FritzBox Zigbee Antenne in ioBroker einbinden?:
@homoran said in FritzBox Zigbee Antenne in ioBroker einbinden?:
@searcher57 sagte in FritzBox Zigbee Antenne in ioBroker einbinden?:
Hier das Protokoll:
bitte keinen Screenshot!
als Text in code-tags posten.Bitte erkläre das!
v7.6.3 233 Log-Größe: 439.1 KB Zeit smartmeter.0 2025-05-07 18:18:49.740 info Received 13 values, 8 updated host.Raspi58GB 2025-05-07 18:16:52.611 info instance system.adapter.openweathermap.0 having pid 2720211 terminated with code 0 (NO_ERROR) openweathermap.0 2025-05-07 18:16:52.102 info Terminated (NO_ERROR): Without reason openweathermap.0 2025-05-07 18:16:43.181 info starting. Version 1.1.2 in /opt/iobroker/node_modules/iobroker.openweathermap, node: v20.19.1, js-controller: 7.0.6 host.Raspi58GB 2025-05-07 18:16:42.020 info instance system.adapter.openweathermap.0 in version "1.1.2" started with pid 2720211 awtrix-light.0 2025-05-07 18:15:45.576 info error ECONNABORTED from stats: timeout of 3000ms exceeded smartmeter.0 2025-05-07 18:13:46.108 info Received 13 values, 8 updated smartmeter.0 2025-05-07 18:08:42.387 info Received 13 values, 8 updated smartmeter.0 2025-05-07 18:03:38.767 info Received 13 values, 6 updated smartmeter.0 2025-05-07 17:58:37.701 info Received 13 values, 6 updated smartmeter.0 2025-05-07 17:53:36.342 info Received 13 values, 6 updated zigbee.0 2025-05-07 17:50:17.995 info Starting Zigbee-Herdsman zigbee.0 2025-05-07 17:50:17.994 info Installed Version: iobroker.zigbee@2.0.5 (Converters 23.6.0 Herdsman 3.5.2) zigbee.0 2025-05-07 17:50:17.978 info Starting Adapter npm ... zigbee.0 2025-05-07 17:50:17.977 info --- creating device debug --- zigbee.0 2025-05-07 17:50:17.972 info --> transmitPower : normal zigbee.0 2025-05-07 17:50:17.969 info init localConfig zigbee.0 2025-05-07 17:50:17.959 info starting. Version 2.0.5 in /opt/iobroker/node_modules/iobroker.zigbee, node: v20.19.1, js-controller: 7.0.6 host.Raspi58GB 2025-05-07 17:50:16.818 info instance system.adapter.zigbee.0 in version "2.0.5" started with pid 2716727 host.Raspi58GB 2025-05-07 17:50:13.485 info instance system.adapter.zigbee.0 terminated with code 11 (ADAPTER_REQUESTED_TERMINATION) zigbee.0 2025-05-07 17:50:13.441 info terminating host.Raspi58GB 2025-05-07 17:50:13.008 info stopInstance system.adapter.zigbee.0 send kill signal zigbee.0 2025-05-07 17:50:12.988 info terminating zigbee.0 2025-05-07 17:50:12.988 warn Failed to stop zigbee during startup zigbee.0 2025-05-07 17:50:12.987 error Failed to open the network: TypeError: Cannot read properties of undefined (reading 'permitJoin') at Controller.permitJoin (/opt/iobroker/node_modules/zigbee-herdsman/src/controller/controller.ts:315:35) at ZigbeeController.permitJoin (/opt/iobroker/node_modules/iobroker.zigbee/lib/zigbeecontroller.js:659:33) at ZigbeeController.stop (/opt/iobroker/node_modules/iobroker.zigbee/lib/zigbeecontroller.js:634:24) at processTicksAndRejections (node:internal/process/task_queues:95:5) at Zigbee.onUnload (/opt/iobroker/node_modules/iobroker.zigbee/main.js:1037:17) zigbee.0 2025-05-07 17:50:12.940 info Terminated (ADAPTER_REQUESTED_TERMINATION): Without reason zigbee.0 2025-05-07 17:50:12.939 info terminating zigbee.0 2025-05-07 17:50:12.938 info Saved local configuration data zigbee.0 2025-05-07 17:50:12.937 info local config saved zigbee.0 2025-05-07 17:50:12.936 info cleaned everything up... zigbee.0 2025-05-07 17:50:12.935 info Got terminate signal TERMINATE_YOURSELF host.Raspi58GB 2025-05-07 17:50:12.932 info stopInstance system.adapter.zigbee.0 (force=false, process=true) zigbee.0 2025-05-07 17:50:07.445 info Starting Zigbee-Herdsman zigbee.0 2025-05-07 17:50:07.444 info Installed Version: iobroker.zigbee@2.0.5 (Converters 23.6.0 Herdsman 3.5.2) zigbee.0 2025-05-07 17:50:07.428 info Starting Adapter npm ... zigbee.0 2025-05-07 17:50:07.427 info --- creating device debug --- zigbee.0 2025-05-07 17:50:07.422 info --> transmitPower : normal zigbee.0 2025-05-07 17:50:07.419 info init localConfig zigbee.0 2025-05-07 17:50:07.409 info starting. Version 2.0.5 in /opt/iobroker/node_modules/iobroker.zigbee, node: v20.19.1, js-controller: 7.0.6 host.Raspi58GB 2025-05-07 17:50:06.159 info instance system.adapter.zigbee.0 in version "2.0.5" started with pid 2716711 admin.0 2025-05-07 17:49:59.324 info <== Disconnect system.user.admin from ::ffff:192.168.178.120 host.Raspi58GB 2025-05-07 17:49:35.710 info Restart adapter system.adapter.zigbee.0 because enabled host.Raspi58GB 2025-05-07 17:49:35.710 error instance system.adapter.zigbee.0 terminated with code 6 (UNCAUGHT_EXCEPTION) host.Raspi58GB 2025-05-07 17:49:35.710 error Caught by controller[1]: at processImmediate (node:internal/timers:483:21) host.Raspi58GB 2025-05-07 17:49:35.710 error Caught by controller[1]: at Immediate.<anonymous> (file:///opt/iobroker/node_modules/@iobroker/db-states-redis/src/lib/states/statesInRedisClient.ts:368:37) host.Raspi58GB 2025-05-07 17:49:35.710 error Caught by controller[1]: at change (/opt/iobroker/node_modules/@iobroker/js-controller-adapter/src/lib/adapter/adapter.ts:10953:34) host.Raspi58GB 2025-05-07 17:49:35.710 error Caught by controller[1]: at Zigbee.emit (node:domain:489:12) host.Raspi58GB 2025-05-07 17:49:35.710 error Caught by controller[1]: at Zigbee.emit (node:events:536:35) host.Raspi58GB 2025-05-07 17:49:35.710 error Caught by controller[1]: at Zigbee.<anonymous> (/opt/iobroker/node_modules/iobroker.zigbee/lib/commands.js:20:48) host.Raspi58GB 2025-05-07 17:49:35.710 error Caught by controller[1]: at Commands.onMessage (/opt/iobroker/node_modules/iobroker.zigbee/lib/commands.js:155:97) host.Raspi58GB 2025-05-07 17:49:35.710 error Caught by controller[1]: TypeError: Cannot read properties of undefined (reading 'CleanupRequired') host.Raspi58GB 2025-05-07 17:49:35.710 error Caught by controller[0]: This error originated either by throwing inside of an async function without a catch block, or by rejecting a promise which was not handled with .catch(). The promise rejected with the reason: zigbee.0 2025-05-07 17:49:35.667 info terminating zigbee.0 2025-05-07 17:49:35.191 info terminating zigbee.0 2025-05-07 17:49:35.191 warn Failed to stop zigbee during startup zigbee.0 2025-05-07 17:49:35.187 error Failed to open the network: TypeError: Cannot read properties of undefined (reading 'permitJoin') at Controller.permitJoin (/opt/iobroker/node_modules/zigbee-herdsman/src/controller/controller.ts:315:35) at ZigbeeController.permitJoin (/opt/iobroker/node_modules/iobroker.zigbee/lib/zigbeecontroller.js:659:33) at ZigbeeController.stop (/opt/iobroker/node_modules/iobroker.zigbee/lib/zigbeecontroller.js:634:24) at processTicksAndRejections (node:internal/process/task_queues:95:5) at Zigbee.onUnload (/opt/iobroker/node_modules/iobroker.zigbee/main.js:1037:17) zigbee.0 2025-05-07 17:49:35.167 warn Terminated (UNCAUGHT_EXCEPTION): Without reason zigbee.0 2025-05-07 17:49:35.167 info terminating zigbee.0 2025-05-07 17:49:35.166 info Saved local configuration data zigbee.0 2025-05-07 17:49:35.165 info local config saved zigbee.0 2025-05-07 17:49:35.165 info cleaned everything up... zigbee.0 2025-05-07 17:49:35.151 error Cannot read properties of undefined (reading 'CleanupRequired') zigbee.0 2025-05-07 17:49:35.150 error TypeError: Cannot read properties of undefined (reading 'CleanupRequired') at Commands.onMessage (/opt/iobroker/node_modules/iobroker.zigbee/lib/commands.js:155:97) at Zigbee.<anonymous> (/opt/iobroker/node_modules/iobroker.zigbee/lib/commands.js:20:48) at Zigbee.emit (node:events:536:35) at Zigbee.emit (node:domain:489:12) at change (/opt/iobroker/node_modules/@iobroker/js-controller-adapter/src/lib/adapter/adapter.ts:10953:34) at Immediate.<anonymous> (file:///opt/iobroker/node_modules/@iobroker/db-states-redis/src/lib/states/statesInRedisClient.ts:368:37) at processImmediate (node:internal/timers:483:21) zigbee.0 2025-05-07 17:49:35.031 error unhandled promise rejection: Cannot read properties of undefined (reading 'CleanupRequired') zigbee.0 2025-05-07 17:49:35.031 error Unhandled promise rejection. This error originated either by throwing inside of an async function without a catch block, or by rejecting a promise which was not handled with .catch(). admin.0 2025-05-07 17:49:34.977 info ==> Connected system.user.admin from ::ffff:192.168.178.120 web.0 2025-05-07 17:49:29.651 info socket.io server listening on port 8082 web.0 2025-05-07 17:49:29.562 info http server listening on port 8082 web.0 2025-05-07 17:49:29.444 info starting. Version 7.0.8 in /opt/iobroker/node_modules/iobroker.web, node: v20.19.1, js-controller: 7.0.6 host.Raspi58GB 2025-05-07 17:49:28.305 info instance system.adapter.web.0 in version "7.0.8" started with pid 2716693 vis-2.0 2025-05-07 17:49:25.387 info vis-2 license is OK. vis-2.0 2025-05-07 17:49:25.212 info starting. Version 2.9.64 in /opt/iobroker/node_modules/iobroker.vis-2, node: v20.19.1, js-controller: 7.0.6 host.Raspi58GB 2025-05-07 17:49:24.266 info instance system.adapter.vis-2.0 in version "2.9.64" started with pid 2716678 text2command.0 2025-05-07 17:49:21.593 info starting. Version 3.0.3 in /opt/iobroker/node_modules/iobroker.text2command, node: v20.19.1, js-controller: 7.0.6 tankerkoenig.0 2025-05-07 17:49:20.815 info Start first request host.Raspi58GB 2025-05-07 17:49:20.263 info instance system.adapter.text2command.0 in version "3.0.3" started with pid 2716641 shelly.1 2025-05-07 17:49:19.622 info [MQTT] Device with client id "shellyplusplugs-b0b21c0ec52c" connected from 192.168.178.100! tankerkoenig.0 2025-05-07 17:49:17.228 info Sync time set to 30 minutes or 1800000 ms tankerkoenig.0 2025-05-07 17:49:17.228 info Adapter is already in daemon mode tankerkoenig.0 2025-05-07 17:49:17.209 info starting. Version 3.4.0 in /opt/iobroker/node_modules/iobroker.tankerkoenig, node: v20.19.1, js-controller: 7.0.6 host.Raspi58GB 2025-05-07 17:49:16.258 info instance system.adapter.tankerkoenig.0 in version "3.4.0" started with pid 2716626 simple-api.0 2025-05-07 17:49:13.410 info http server listening on port 8087 simple-api.0 2025-05-07 17:49:13.403 info Allow states only when user is owner: false simple-api.0 2025-05-07 17:49:13.402 info simpleAPI server listening on port 8087 simple-api.0 2025-05-07 17:49:13.391 info starting. Version 2.8.0 in /opt/iobroker/node_modules/iobroker.simple-api, node: v20.19.1, js-controller: 7.0.6 host.Raspi58GB 2025-05-07 17:49:12.374 info instance system.adapter.simple-api.0 in version "2.8.0" started with pid 2716611 host.Raspi58GB 2025-05-07 17:49:12.321 info instance system.adapter.yr.0 terminated with code 11 (ADAPTER_REQUESTED_TERMINATION) yr.0 2025-05-07 17:49:11.492 info Terminated (ADAPTER_REQUESTED_TERMINATION): Without reason yr.0 2025-05-07 17:49:11.492 info Data updated. iot.0 2025-05-07 17:49:10.166 info Connection changed: connect "wolff_netphen_web_de" iot.0 2025-05-07 17:49:09.557 info Connecting with a18wym7vjdl22g.iot.eu-west-1.amazonaws.com iot.0 2025-05-07 17:49:09.511 info starting. Version 3.3.0 in /opt/iobroker/node_modules/iobroker.iot, node: v20.19.1, js-controller: 7.0.6 host.Raspi58GB 2025-05-07 17:49:08.279 info instance system.adapter.iot.0 in version "3.3.0" started with pid 2716594 fritzdect.0 2025-05-07 17:49:08.240 error login not possible, check user and permissions fritzdect.0 2025-05-07 17:49:08.239 error API err => {"msg":"failed to get challenge","function":"get_sid","error":{"msg":"failed to login","function":"send_response","error":{"msg":"failed to login, wrong user name or password","function":"send_response","error":"0000000000000000"}}} fritzdect.0 2025-05-07 17:49:08.239 error no response part in returned error message fritzdect.0 2025-05-07 17:49:08.239 error API funct => login_SID fritzdect.0 2025-05-07 17:49:08.238 error API msg => error calling executeCommand fritzdect.0 2025-05-07 17:49:08.237 error --------------- error calling the fritzbox ----------- fritzdect.0 2025-05-07 17:49:06.316 info fritzdect uses USER: admin fritzdect.0 2025-05-07 17:49:06.300 info fritzdect entered ready fritzdect.0 2025-05-07 17:49:06.286 info starting. Version 2.6.1 in /opt/iobroker/node_modules/iobroker.fritzdect, node: v20.19.1, js-controller: 7.0.6 shelly.1 2025-05-07 17:49:05.550 info [MQTT] Device with client id "shellyplusplugs-d48afc7b9540" connected from 192.168.178.96! shelly.1 2025-05-07 17:49:05.278 info [MQTT] Device with client id "shellyplusplugs-e465b8b302bc" connected from 192.168.178.95! host.Raspi58GB 2025-05-07 17:49:05.003 info instance system.adapter.fritzdect.0 in version "2.6.1" started with pid 2716579 followthesun.0 2025-05-07 17:49:03.027 info Daily sun parameter calculation scheduled for 00:00:36 followthesun.0 2025-05-07 17:49:03.026 info Sun position calculation will be done every 60 seconds followthesun.0 2025-05-07 17:49:03.025 info Started with JSON-Explorer version 0.1.16 followthesun.0 2025-05-07 17:49:03.014 info starting. Version 0.5.2 in /opt/iobroker/node_modules/iobroker.followthesun, node: v20.19.1, js-controller: 7.0.6 shelly.1 2025-05-07 17:49:01.927 info [MQTT] Device with client id "shellyplusplugs-e465b8456ff4" connected from 192.168.178.98! host.Raspi58GB 2025-05-07 17:49:01.537 info instance system.adapter.followthesun.0 in version "0.5.2" started with pid 2716564 shelly.1 2025-05-07 17:49:00.901 info [MQTT] Device with client id "shellyplusplugs-b0b21c1243bc" connected from 192.168.178.102! shelly.1 2025-05-07 17:48:56.540 info [MQTT] Device with client id "shellyplusplugs-d48afc7a4830" connected from 192.168.178.97! echarts.0 2025-05-07 17:48:54.613 info starting. Version 1.9.2 in /opt/iobroker/node_modules/iobroker.echarts, node: v20.19.1, js-controller: 7.0.6 host.Raspi58GB 2025-05-07 17:48:53.726 info instance system.adapter.echarts.0 in version "1.9.2" started with pid 2716549 doorbird.0 2025-05-07 17:48:51.398 info starting. Version 3.0.0 in /opt/iobroker/node_modules/iobroker.doorbird, node: v20.19.1, js-controller: 7.0.6 host.Raspi58GB 2025-05-07 17:48:50.532 info instance system.adapter.doorbird.0 in version "3.0.0" started with pid 2716534 discovery.0 2025-05-07 17:48:47.316 info starting. Version 5.0.0 in /opt/iobroker/node_modules/iobroker.discovery, node: v20.19.1, js-controller: 7.0.6 shelly.1 2025-05-07 17:48:46.772 info [MQTT] Device with client id "shellyplus1pm-d48afc598e4c" connected from 192.168.178.94! host.Raspi58GB 2025-05-07 17:48:46.199 info instance system.adapter.discovery.0 in version "5.0.0" started with pid 2716519 zigbee.0 2025-05-07 17:48:45.452 info Starting Zigbee-Herdsman zigbee.0 2025-05-07 17:48:45.451 info Installed Version: iobroker.zigbee@2.0.5 (Converters 23.6.0 Herdsman 3.5.2) zigbee.0 2025-05-07 17:48:45.436 info Starting Adapter npm ... zigbee.0 2025-05-07 17:48:45.435 info --- creating device debug --- zigbee.0 2025-05-07 17:48:45.430 info --> transmitPower : normal zigbee.0 2025-05-07 17:48:45.427 info init localConfig zigbee.0 2025-05-07 17:48:45.418 info starting. Version 2.0.5 in /opt/iobroker/node_modules/iobroker.zigbee, node: v20.19.1, js-controller: 7.0.6 host.Raspi58GB 2025-05-07 17:48:44.243 info instance system.adapter.zigbee.0 in version "2.0.5" started with pid 2716503 awtrix-light.0 2025-05-07 17:48:42.443 info Starting - connecting to http://192.168.178.83:80/ awtrix-light.0 2025-05-07 17:48:42.348 info starting. Version 1.7.0 in /opt/iobroker/node_modules/iobroker.awtrix-light, node: v20.19.1, js-controller: 7.0.6 yr.0 2025-05-07 17:48:41.778 info longitude/longitude will be set by self-Config - longitude: 7.0362624235667255 latitude: 50.622376836807405 yr.0 2025-05-07 17:48:41.757 info starting. Version 5.3.0 in /opt/iobroker/node_modules/iobroker.yr, node: v20.19.1, js-controller: 7.0.6 host.Raspi58GB 2025-05-07 17:48:40.856 info instance system.adapter.awtrix-light.0 in version "1.7.0" started with pid 2716484 shelly.0 2025-05-07 17:48:40.312 info [CoAP] Device 192.168.178.45 (shelly1pm / shelly1pm-E09806A9FFDF / SHSW-PM#E09806A9FFDF#1) connected! Polltime set to 15 sec. host.Raspi58GB 2025-05-07 17:48:40.264 info instance system.adapter.yr.0 in version "5.3.0" started with pid 2716473 host.Raspi58GB 2025-05-07 17:48:40.260 info instance scheduled system.adapter.yr.0 40 * * * * shelly.0 2025-05-07 17:48:38.797 info [CoAP] Device 192.168.178.88 (shelly1pm / shelly1pm-C45BBE6A38D2 / SHSW-PM#C45BBE6A38D2#1) connected! Polltime set to 15 sec. tr-064.0 2025-05-07 17:48:37.888 info starting. Version 4.3.0 in /opt/iobroker/node_modules/iobroker.tr-064, node: v20.19.1, js-controller: 7.0.6 host.Raspi58GB 2025-05-07 17:48:37.165 info instance system.adapter.openweathermap.0 terminated with code 0 (NO_ERROR) openweathermap.0 2025-05-07 17:48:36.607 info Terminated (NO_ERROR): Without reason host.Raspi58GB 2025-05-07 17:48:36.367 info instance system.adapter.tr-064.0 in version "4.3.0" started with pid 2716458 shelly.0 2025-05-07 17:48:36.162 info [CoAP] Device 192.168.178.43 (shellyplug-s / shellyplug-s-B52D91 / SHPLG-S#B52D91#1) connected! Polltime set to 15 sec. shelly.0 2025-05-07 17:48:36.059 info [CoAP] Device 192.168.178.60 (shelly1pm / shelly1pm-349454783D53 / SHSW-PM#349454783D53#1) connected! Polltime set to 15 sec. smartmeter.0 2025-05-07 17:48:35.723 info Received 13 values, 13 updated smartmeter.0 2025-05-07 17:48:34.915 info starting. Version 3.4.0 in /opt/iobroker/node_modules/iobroker.smartmeter, node: v20.19.1, js-controller: 7.0.6 host.Raspi58GB 2025-05-07 17:48:32.604 info instance system.adapter.smartmeter.0 in version "3.4.0" started with pid 2716443 host.Raspi58GB 2025-05-07 17:48:31.167 error cannot call visUtils: Not exists shelly.0 2025-05-07 17:48:30.940 info [CoAP] Device 192.168.178.37 (shellyem3 / shellyem3-E89F6D84ABB5 / SHEM-3#E89F6D84ABB5#1) connected! Polltime set to 15 sec. admin.0 2025-05-07 17:48:30.856 info ==> Connected system.user.admin from ::ffff:192.168.178.120 shelly.0 2025-05-07 17:48:30.001 info [CoAP] Device 192.168.178.61 (shelly1pm / shelly1pm-34945475C0D4 / SHSW-PM#34945475C0D4#1) connected! Polltime set to 15 sec. shelly.0 2025-05-07 17:48:29.875 info [CoAP] Device 192.168.178.27 (shellyplug-s / shellyplug-s-B4BD04 / SHPLG-S#B4BD04#1) connected! Polltime set to 15 sec. shelly.1 2025-05-07 17:48:29.832 info Starting in MQTT mode. Listening on 0.0.0.0:1882 (QoS 0) shelly.0 2025-05-07 17:48:29.687 info [CoAP] Device 192.168.178.59 (shelly1pm / shelly1pm-349454783F33 / SHSW-PM#349454783F33#1) connected! Polltime set to 15 sec. shelly.1 2025-05-07 17:48:29.372 info starting. Version 9.2.0 in /opt/iobroker/node_modules/iobroker.shelly, node: v20.19.1, js-controller: 7.0.6 shelly.0 2025-05-07 17:48:29.178 info [CoAP] Device 192.168.178.73 (shellygas / shellygas-3C6105F68FE8 / SHGS-1#3C6105F68FE8#1) connected! Polltime set to 3600 sec. host.Raspi58GB 2025-05-07 17:48:28.258 info instance system.adapter.shelly.1 in version "9.2.0" started with pid 2716414 shelly.0 2025-05-07 17:48:25.830 info [CoAP Server] Listening for packets in the network shelly.0 2025-05-07 17:48:25.805 info Starting in CoAP mode. Listening on 192.168.178.57:5683 shelly.0 2025-05-07 17:48:25.601 info starting. Version 9.2.0 in /opt/iobroker/node_modules/iobroker.shelly, node: v20.19.1, js-controller: 7.0.6 host.Raspi58GB 2025-05-07 17:48:24.254 info instance system.adapter.shelly.0 in version "9.2.0" started with pid 2716395 rpi2.0 2025-05-07 17:48:21.210 info starting. Version 2.4.0 in /opt/iobroker/node_modules/iobroker.rpi2, node: v20.19.1, js-controller: 7.0.6 host.Raspi58GB 2025-05-07 17:48:20.281 info instance system.adapter.rpi2.0 in version "2.4.0" started with pid 2716354 openweathermap.0 2025-05-07 17:48:17.307 info starting. Version 1.1.2 in /opt/iobroker/node_modules/iobroker.openweathermap, node: v20.19.1, js-controller: 7.0.6 host.Raspi58GB 2025-05-07 17:48:16.284 info instance system.adapter.openweathermap.0 in version "1.1.2" started with pid 2716339 host.Raspi58GB 2025-05-07 17:48:16.280 info instance scheduled system.adapter.openweathermap.0 16 * * * * mqtt.0 2025-05-07 17:48:14.052 info All states published mqtt.0 2025-05-07 17:48:13.444 info Publishing state mqtt.0.shellyplusplugs-e465b8b302bc.status.ws mqtt.0 2025-05-07 17:48:13.444 info Publishing state mqtt.0.shellyplusplugs-e465b8b302bc.status.sys mqtt.0 2025-05-07 17:48:13.444 info Publishing state mqtt.0.shellyplusplugs-e465b8b302bc.status.plugs_ui mqtt.0 2025-05-07 17:48:13.444 info Publishing state mqtt.0.shellyplusplugs-e465b8b302bc.status.ffs mqtt.0 2025-05-07 17:48:13.444 info Publishing state mqtt.0.shellyplusplugs-e465b8b302bc.status.ble mqtt.0 2025-05-07 17:48:13.444 info Publishing state mqtt.0.shellyplusplugs-e465b8b302bc.events.rpc mqtt.0 2025-05-07 17:48:13.444 info Publishing state mqtt.0.shellyplusplugs-e465b8456ff4.status.ws mqtt.0 2025-05-07 17:48:13.444 info Publishing state mqtt.0.shellyplusplugs-e465b8b302bc.online mqtt.0 2025-05-07 17:48:13.444 info Publishing state mqtt.0.shellyplusplugs-e465b8b302bc.status.cloud mqtt.0 2025-05-07 17:48:13.444 info Publishing state mqtt.0.shellyplusplugs-e465b8b302bc.status.mqtt mqtt.0 2025-05-07 17:48:13.444 info Publishing state mqtt.0.shellyplusplugs-e465b8b302bc.status.switch:0 mqtt.0 2025-05-07 17:48:13.444 info Publishing state mqtt.0.shellyplusplugs-e465b8b302bc.status.wifi mqtt.0 2025-05-07 17:48:13.443 info Publishing state mqtt.0.shellyplusplugs-e465b8456ff4.status.sys mqtt.0 2025-05-07 17:48:13.443 info Publishing state mqtt.0.shellyplusplugs-e465b8456ff4.status.plugs_ui mqtt.0 2025-05-07 17:48:13.443 info Publishing state mqtt.0.shellyplusplugs-e465b8456ff4.status.ffs mqtt.0 2025-05-07 17:48:13.443 info Publishing state mqtt.0.shellyplusplugs-e465b8456ff4.status.ble mqtt.0 2025-05-07 17:48:13.443 info Publishing state mqtt.0.shellyplusplugs-e465b8456ff4.events.rpc mqtt.0 2025-05-07 17:48:13.443 info Publishing state mqtt.0.shellyplusplugs-d48afc7b9540.status.wifi mqtt.0 2025-05-07 17:48:13.443 info Publishing state mqtt.0.shellyplusplugs-d48afc7b9540.status.switch:0 mqtt.0 2025-05-07 17:48:13.443 info Publishing state mqtt.0.shellyplusplugs-d48afc7b9540.status.plugs_ui mqtt.0 2025-05-07 17:48:13.443 info Publishing state mqtt.0.shellyplusplugs-d48afc7b9540.status.sys mqtt.0 2025-05-07 17:48:13.443 info Publishing state mqtt.0.shellyplusplugs-d48afc7b9540.status.ws mqtt.0 2025-05-07 17:48:13.443 info Publishing state mqtt.0.shellyplusplugs-e465b8456ff4.online mqtt.0 2025-05-07 17:48:13.443 info Publishing state mqtt.0.shellyplusplugs-e465b8456ff4.status.cloud mqtt.0 2025-05-07 17:48:13.443 info Publishing state mqtt.0.shellyplusplugs-e465b8456ff4.status.mqtt mqtt.0 2025-05-07 17:48:13.443 info Publishing state mqtt.0.shellyplusplugs-e465b8456ff4.status.switch:0 mqtt.0 2025-05-07 17:48:13.443 info Publishing state mqtt.0.shellyplusplugs-e465b8456ff4.status.wifi mqtt.0 2025-05-07 17:48:13.442 info Publishing state mqtt.0.shellyplusplugs-d48afc7b9540.status.ffs mqtt.0 2025-05-07 17:48:13.442 info Publishing state mqtt.0.shellyplusplugs-d48afc7b9540.status.ble mqtt.0 2025-05-07 17:48:13.442 info Publishing state mqtt.0.shellyplusplugs-d48afc7b9540.shellyplus1pm-d48afc598e4c.status mqtt.0 2025-05-07 17:48:13.442 info Publishing state mqtt.0.shellyplusplugs-d48afc7b9540.events.rpc mqtt.0 2025-05-07 17:48:13.442 info Publishing state mqtt.0.shellyplusplugs-d48afc7a4830.status.wifi mqtt.0 2025-05-07 17:48:13.442 info Publishing state mqtt.0.shellyplusplugs-d48afc7a4830.status.switch:0 mqtt.0 2025-05-07 17:48:13.442 info Publishing state mqtt.0.shellyplusplugs-d48afc7a4830.status.mqtt mqtt.0 2025-05-07 17:48:13.442 info Publishing state mqtt.0.shellyplusplugs-d48afc7a4830.status.ffs mqtt.0 2025-05-07 17:48:13.442 info Publishing state mqtt.0.shellyplusplugs-d48afc7a4830.status.plugs_ui mqtt.0 2025-05-07 17:48:13.442 info Publishing state mqtt.0.shellyplusplugs-d48afc7a4830.status.sys mqtt.0 2025-05-07 17:48:13.442 info Publishing state mqtt.0.shellyplusplugs-d48afc7a4830.status.ws mqtt.0 2025-05-07 17:48:13.442 info Publishing state mqtt.0.shellyplusplugs-d48afc7b9540.online mqtt.0 2025-05-07 17:48:13.442 info Publishing state mqtt.0.shellyplusplugs-d48afc7b9540.shellyplus1pm-d48afc598e4c.status.on mqtt.0 2025-05-07 17:48:13.442 info Publishing state mqtt.0.shellyplusplugs-d48afc7b9540.status.cloud mqtt.0 2025-05-07 17:48:13.442 info Publishing state mqtt.0.shellyplusplugs-d48afc7b9540.status.mqtt mqtt.0 2025-05-07 17:48:13.441 info Publishing state mqtt.0.shellyplusplugs-d48afc7a4830.status.ble mqtt.0 2025-05-07 17:48:13.441 info Publishing state mqtt.0.shellyplusplugs-d48afc7a4830.events.rpc mqtt.0 2025-05-07 17:48:13.441 info Publishing state mqtt.0.shellyplusplugs-b0b21c1243bc.status.wifi mqtt.0 2025-05-07 17:48:13.441 info Publishing state mqtt.0.shellyplusplugs-b0b21c1243bc.status.switch:0 mqtt.0 2025-05-07 17:48:13.441 info Publishing state mqtt.0.shellyplusplugs-b0b21c1243bc.status.mqtt mqtt.0 2025-05-07 17:48:13.441 info Publishing state mqtt.0.shellyplusplugs-b0b21c1243bc.status.ffs mqtt.0 2025-05-07 17:48:13.441 info Publishing state mqtt.0.shellyplusplugs-b0b21c1243bc.status.plugs_ui mqtt.0 2025-05-07 17:48:13.441 info Publishing state mqtt.0.shellyplusplugs-b0b21c1243bc.status.sys mqtt.0 2025-05-07 17:48:13.441 info Publishing state mqtt.0.shellyplusplugs-b0b21c1243bc.status.ws mqtt.0 2025-05-07 17:48:13.441 info Publishing state mqtt.0.shellyplusplugs-d48afc7a4830.online mqtt.0 2025-05-07 17:48:13.441 info Publishing state mqtt.0.shellyplusplugs-d48afc7a4830.status.cloud -
@searcher57 Dein Log zeigt das du den Adapter angehalten hast bevor das Zigbee-Subsystem vollständig gestartet war. Besagter Start kann insbesondere bei einem ersten Start mit 'neuer' Konifiguration bis zu 5 Minuten dauern.
Bitte folgendes machen:
- Zigbee Adapter anhalten.
- 60 s Warten
- Log löschen
- Zigbee Adapter starten
- Umschalten auf die Log-Ansicht
- Abwarten bis einer von 2 Events eintritt:
-- Fehlermeldung das der Adapter nicht gestartet werden kann
-- Meldung das der Adapter erfolgreich gestartet wurde.
Besagte Meldungen dann hier posten.
A.
