Kann den Rpi Adapter auf meinem Raspberry nicht installieren
-
@thomas-braun ist vielleicht nodejs zu neu?
-
@basti97 sagte in Kann den Rpi Adapter auf meinem Raspberry nicht installieren:
ich dachte opengpio wird schon mit dem Befehl
sudo apt install -y build-essential python3-dev git automatisch mit installiert. Wo ich das ganze damals mal getestet hatte habe ich gedacht das ich nur den Adapter installiert habe und dann wäre es gegangen.Nein, damit werden nur Pakete installiert, die zum bauen von Paketen benötigt werden.
opengpio wird dann durch die Kompiler gejagtist vielleicht nodejs zu neu?
Nein, eher ist dein OS zu alt/auf der falschen Architektur. Du fährst doch da nodejs@20, das ist die momentane Empfehlung.
/usr/lib/gcc/arm-linux-gnueabihf/10/crtbeginS.o: file not recognized: file format not recognized
deutet auf 32Bit hin, das wird eher nicht mehr mit dem aktuellen Code durchlaufen.
-
an dieser stelle spielt node keine rolle.
das kompillieren und linken eines c/c++ programms (opengpio ) schlägt fehl.
immer noch der gleiche fehler -
-
@thomas-braun sagte in Kann den Rpi Adapter auf meinem Raspberry nicht installieren:
iob diag
========== Start marking the full check here =========== ```bash Script v.2025-03-08 *** BASE SYSTEM *** Static hostname: raspberrypi Icon name: computer Operating System: Raspbian GNU/Linux 11 (bullseye) Kernel: Linux 6.1.21-v7+ Architecture: arm OS is similar to: debian Model : Raspberry Pi 3 Model B Plus Rev 1.3 Docker : false Virtualization : none Kernel : armv7l Userland : 32 bit Systemuptime and Load: 09:46:33 up 14:44, 2 users, load average: 3.28, 2.88, 2.27 CPU threads: 4 *** LIFE CYCLE STATUS *** Debian 'bullseye' is the current oldstable version. Please upgrade to the latest stable release 'bookworm' in due time! *** RASPBERRY THROTTLING *** Current issues: No throttling issues detected. Previously detected issues: ~ Under-voltage has occurred ~ Arm frequency capping has occurred *** TIME AND TIMEZONES *** Local time: Wed 2025-07-16 09:46:33 CEST Universal time: Wed 2025-07-16 07:46:33 UTC RTC time: n/a Time zone: Europe/Berlin (CEST, +0200) System clock synchronized: yes NTP service: active RTC in local TZ: no *** Users and Groups *** User that called 'iob diag': pi HOME=/home/pi GROUPS=pi adm dialout cdrom sudo audio video plugdev games users input netdev lpadmin gpio i2c spi iobroker User that is running 'js-controller': iobroker HOME=/home/iobroker GROUPS=iobroker tty dialout audio video plugdev bluetooth gpio i2c *** DISPLAY-SERVER SETUP *** Display-Server: false Desktop: Terminal: tty *** MEMORY *** total used free shared buff/cache available Mem: 921M 216M 209M 1.0M 496M 634M Swap: 99M 78M 21M Total: 1.0G 295M 230M Active iob-Instances: 3 921 M total memory 216 M used memory 407 M active memory 210 M inactive memory 209 M free memory 70 M buffer memory 425 M swap cache 99 M total swap 78 M used swap 21 M free swap *** top - Table Of Processes *** top - 09:46:34 up 14:44, 2 users, load average: 3.28, 2.88, 2.27 Tasks: 158 total, 1 running, 157 sleeping, 0 stopped, 0 zombie %Cpu(s): 5.5 us, 5.5 sy, 0.0 ni, 89.0 id, 0.0 wa, 0.0 hi, 0.0 si, 0.0 st MiB Mem : 922.0 total, 209.1 free, 216.4 used, 496.5 buff/cache MiB Swap: 100.0 total, 21.0 free, 79.0 used. 633.7 avail Mem *** FAILED SERVICES *** UNIT LOAD ACTIVE SUB DESCRIPTION * bthelper@hci0.service loaded failed failed Raspberry Pi bluetooth helper * colord.service loaded failed failed Manage, Install and Generate Color Profiles * openvpn-client@client.service loaded failed failed OpenVPN tunnel for client * plymouth-start.service loaded failed failed Show Plymouth Boot Screen * wg-quick@wg0.service loaded failed failed WireGuard via wg-quick(8) for wg0 LOAD = Reflects whether the unit definition was properly loaded. ACTIVE = The high-level unit activation state, i.e. generalization of SUB. SUB = The low-level unit activation state, values depend on unit type. 5 loaded units listed. *** DMESG CRITICAL ERRORS *** 144 CRITICAL ERRORS DETECTED! Check 'sudo dmesg --level=emerg,alert,crit -T' for details *** FILESYSTEM *** Filesystem Type Size Used Avail Use% Mounted on /dev/root ext4 15G 6.2G 7.7G 45% / devtmpfs devtmpfs 333M 0 333M 0% /dev tmpfs tmpfs 461M 4.0K 461M 1% /dev/shm tmpfs tmpfs 185M 772K 184M 1% /run tmpfs tmpfs 5.0M 4.0K 5.0M 1% /run/lock /dev/mmcblk0p1 vfat 253M 51M 202M 20% /boot tmpfs tmpfs 93M 20K 93M 1% /run/user/1000 Messages concerning ext4 filesystem in dmesg: [Tue Jul 15 19:01:52 2025] Kernel command line: coherent_pool=1M 8250.nr_uarts=0 snd_bcm2835.enable_headphones=0 snd_bcm2835.enable_headphones=1 snd_bcm2835.enable_hdmi=1 snd_bcm2835.enable_hdmi=0 video=Composite-1:720x480@60i vc_mem.mem_base=0x3ec00000 vc_mem.mem_size=0x40000000 console=ttyS0,115200 console=tty1 root=PARTUUID=44a3dce6-02 rootfstype=ext4 fsck.repair=yes rootwait quiet splash plymouth.ignore-serial-consoles [Tue Jul 15 19:01:55 2025] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Quota mode: none. [Tue Jul 15 19:01:55 2025] VFS: Mounted root (ext4 filesystem) readonly on device 179:2. [Tue Jul 15 19:01:58 2025] EXT4-fs (mmcblk0p2): re-mounted. Quota mode: none. Show mounted filesystems: TARGET SOURCE FSTYPE OPTIONS / /dev/mmcblk0p2 ext4 rw,noatime `-/boot /dev/mmcblk0p1 vfat rw,relatime,fmask=0022,dmask=0022,codepage=437,iocharset=ascii,shortname=mixed,flush,errors=remount-ro Files in neuralgic directories: /var: 2.2G /var/ 1.1G /var/cache/apt 1.1G /var/cache 992M /var/cache/apt/archives 865M /var/log Journal file /var/log/journal/17f5be65a0144b718868da827cf6bffe/system@0c9cfaba2fdb43568eb34c2594062e00-0000000000000001-0005cf905c0cadb6.journal corrupted, ignoring file. Archived and active journals take up 776.1M in the file system. /opt/iobroker/backups: 4.0K /opt/iobroker/backups/ /opt/iobroker/iobroker-data: 103M /opt/iobroker/iobroker-data/ 64M /opt/iobroker/iobroker-data/files 47M /opt/iobroker/iobroker-data/files/admin.admin 46M /opt/iobroker/iobroker-data/files/admin.admin/custom/assets 46M /opt/iobroker/iobroker-data/files/admin.admin/custom The five largest files in iobroker-data are: 22M /opt/iobroker/iobroker-data/objects.jsonl 8.1M /opt/iobroker/iobroker-data/files/backitup.admin/assets/index-BFvcOIQE.js 3.7M /opt/iobroker/iobroker-data/files/backitup.admin/custom/assets/index-CyIqcfMJ.js 3.7M /opt/iobroker/iobroker-data/files/admin.admin/custom/assets/index-ZPb95xPG.js 3.7M /opt/iobroker/iobroker-data/files/admin.admin/custom/assets/index-IIKn7Ixx.js USB-Devices by-id: USB-Sticks - Avoid direct links to /dev/tty* in your adapter setups, please always prefer the links 'by-id': No Devices found 'by-id' Zigbee Network Settings on your coordinator/in nvbackup are: zigbee.X Extended Pan ID: *** MASKED *** Pan ID: *** MASKED *** Channel: *** MASKED *** Network Key: *** MASKED *** To unmask the settings run 'iob diag --unmask' *** NodeJS-Installation *** /usr/bin/nodejs v20.19.1 /usr/bin/node v20.19.1 /usr/bin/npm 10.8.2 /usr/bin/npx 10.8.2 /usr/bin/corepack 0.31.0 nodejs: Installed: 20.19.1-1nodesource1 Candidate: 20.19.1-1nodesource1 Version table: *** 20.19.1-1nodesource1 600 500 https://deb.nodesource.com/node_20.x nodistro/main armhf Packages 100 /var/lib/dpkg/status 20.19.0-1nodesource1 600 500 https://deb.nodesource.com/node_20.x nodistro/main armhf Packages 20.18.3-1nodesource1 600 500 https://deb.nodesource.com/node_20.x nodistro/main armhf Packages 20.18.2-1nodesource1 600 500 https://deb.nodesource.com/node_20.x nodistro/main armhf Packages 20.18.1-1nodesource1 600 500 https://deb.nodesource.com/node_20.x nodistro/main armhf Packages 20.18.0-1nodesource1 600 500 https://deb.nodesource.com/node_20.x nodistro/main armhf Packages 20.17.0-1nodesource1 600 500 https://deb.nodesource.com/node_20.x nodistro/main armhf Packages 20.16.0-1nodesource1 600 500 https://deb.nodesource.com/node_20.x nodistro/main armhf Packages 20.15.1-1nodesource1 600 500 https://deb.nodesource.com/node_20.x nodistro/main armhf Packages 20.15.0-1nodesource1 600 500 https://deb.nodesource.com/node_20.x nodistro/main armhf Packages 20.14.0-1nodesource1 600 500 https://deb.nodesource.com/node_20.x nodistro/main armhf Packages 20.13.1-1nodesource1 600 500 https://deb.nodesource.com/node_20.x nodistro/main armhf Packages 20.13.0-1nodesource1 600 500 https://deb.nodesource.com/node_20.x nodistro/main armhf Packages 20.12.2-1nodesource1 600 500 https://deb.nodesource.com/node_20.x nodistro/main armhf Packages 20.12.1-1nodesource1 600 500 https://deb.nodesource.com/node_20.x nodistro/main armhf Packages 20.12.0-1nodesource1 600 500 https://deb.nodesource.com/node_20.x nodistro/main armhf Packages 20.11.1-1nodesource1 600 500 https://deb.nodesource.com/node_20.x nodistro/main armhf Packages 20.11.0-1nodesource1 600 500 https://deb.nodesource.com/node_20.x nodistro/main armhf Packages 20.10.0-1nodesource1 600 500 https://deb.nodesource.com/node_20.x nodistro/main armhf Packages 20.9.0-1nodesource1 600 500 https://deb.nodesource.com/node_20.x nodistro/main armhf Packages 20.8.1-1nodesource1 600 500 https://deb.nodesource.com/node_20.x nodistro/main armhf Packages 20.8.0-1nodesource1 600 500 https://deb.nodesource.com/node_20.x nodistro/main armhf Packages 20.7.0-1nodesource1 600 500 https://deb.nodesource.com/node_20.x nodistro/main armhf Packages 20.6.1-1nodesource1 600 500 https://deb.nodesource.com/node_20.x nodistro/main armhf Packages 20.6.0-1nodesource1 600 500 https://deb.nodesource.com/node_20.x nodistro/main armhf Packages 20.5.1-1nodesource1 600 500 https://deb.nodesource.com/node_20.x nodistro/main armhf Packages 20.5.0-1nodesource1 600 500 https://deb.nodesource.com/node_20.x nodistro/main armhf Packages 20.4.0-1nodesource1 600 500 https://deb.nodesource.com/node_20.x nodistro/main armhf Packages 20.3.1-1nodesource1 600 500 https://deb.nodesource.com/node_20.x nodistro/main armhf Packages 20.3.0-1nodesource1 600 500 https://deb.nodesource.com/node_20.x nodistro/main armhf Packages 20.2.0-1nodesource1 600 500 https://deb.nodesource.com/node_20.x nodistro/main armhf Packages 20.1.0-1nodesource1 600 500 https://deb.nodesource.com/node_20.x nodistro/main armhf Packages 20.0.0-1nodesource1 600 500 https://deb.nodesource.com/node_20.x nodistro/main armhf Packages 12.22.12~dfsg-1~deb11u7 500 500 http://raspbian.raspberrypi.org/raspbian bullseye/main armhf Packages Temp directories causing deletion problem: 0 No problems detected Errors in npm tree: 0 No problems detected *** ioBroker-Installation *** ioBroker Status iobroker is running on this host. Objects type: jsonl States type: jsonl Hosts: raspberrypi raspberrypi (version: 7.0.6, hostname: raspberrypi , alive, uptime: 35829) Core adapters versions js-controller: 7.0.6 admin: 7.6.17 javascript: "javascript" not found nodejs modules from github: 0 Adapter State + system.adapter.admin.0 : admin : raspberrypi - enabled, port: 8081, bind: 0.0.0.0, run as: admin system.adapter.backitup.0 : backitup : raspberrypi - disabled system.adapter.discovery.0 : discovery : raspberrypi - disabled + system.adapter.mqtt-client.0 : mqtt-client : raspberrypi - enabled, port: 1884 + instance is alive Enabled adapters with bindings + system.adapter.admin.0 : admin : raspberrypi - enabled, port: 8081, bind: 0.0.0.0, run as: admin + system.adapter.mqtt-client.0 : mqtt-client : raspberrypi - enabled, port: 1884 ioBroker-Repositories ┌────────────────────────────────────────────────────────────────────────────────────────────── │ (index) │ name │ url │ auto upgrade │ ├────────────────────────────────────────────────────────────────────────────────────────────── │ 0 │ 'stable' │ 'http://download.iobroker.net/sources-dist.json' │ false │ │ 1 │ 'beta' │ 'http://download.iobroker.net/sources-dist-latest.json' │ false │ └────────────────────────────────────────────────────────────────────────────────────────────── Active repo(s): stable Upgrade policy: none Installed ioBroker-Adapters Used repository: stable Adapter "admin" : 7.6.17 , installed 7.6.17 Adapter "backitup" : 3.3.5 , installed 3.2.2 [Updatable] Adapter "discovery" : 5.0.0 , installed 5.0.0 Controller "js-controller": 7.0.6 , installed 7.0.6 Adapter "mqtt-client" : 3.0.0 , installed 3.0.0 Objects and States Please stand by - This may take a while Objects: 171 States: 106 *** OS-Repositories and Updates *** Hit:1 http://raspbian.raspberrypi.org/raspbian bullseye InRelease Hit:2 http://archive.raspberrypi.org/debian bullseye InRelease Hit:3 https://deb.nodesource.com/node_20.x nodistro InRelease Reading package lists... Pending Updates: 0 *** Listening Ports *** Active Internet connections (only servers) Proto Recv-Q Send-Q Local Address Foreign Address State User Inode PID/Program name tcp 0 0 0.0.0.0:80 0.0.0.0:* LISTEN 0 14657 623/lighttpd tcp 0 0 0.0.0.0:22 0.0.0.0:* LISTEN 0 14552 551/sshd: /usr/sbin tcp 0 0 0.0.0.0:53 0.0.0.0:* LISTEN 0 14166 876/dnsmasq tcp 0 0 127.0.0.1:9001 0.0.0.0:* LISTEN 1001 285666 21933/iobroker.js-c tcp 0 0 127.0.0.1:9000 0.0.0.0:* LISTEN 1001 285671 21933/iobroker.js-c tcp 0 0 127.0.0.1:631 0.0.0.0:* LISTEN 0 297692 25814/cupsd tcp6 0 0 :::80 :::* LISTEN 0 14658 623/lighttpd tcp6 0 0 :::22 :::* LISTEN 0 14554 551/sshd: /usr/sbin tcp6 0 0 ::1:631 :::* LISTEN 0 297691 25814/cupsd tcp6 0 0 :::53 :::* LISTEN 0 14168 876/dnsmasq tcp6 0 0 :::8081 :::* LISTEN 1001 288840 21989/io.admin.0 udp 0 0 0.0.0.0:59903 0.0.0.0:* 108 12483 337/avahi-daemon: r udp 0 0 0.0.0.0:53 0.0.0.0:* 0 14165 876/dnsmasq udp 0 0 0.0.0.0:67 0.0.0.0:* 0 14162 876/dnsmasq udp 0 0 0.0.0.0:68 0.0.0.0:* 0 12897 857/dhcpcd udp 0 0 0.0.0.0:5353 0.0.0.0:* 108 12481 337/avahi-daemon: r udp6 0 0 :::546 :::* 0 116938 857/dhcpcd udp6 0 0 :::53 :::* 0 14167 876/dnsmasq udp6 0 0 :::58970 :::* 108 12484 337/avahi-daemon: r udp6 0 0 :::5353 :::* 108 12482 337/avahi-daemon: r *** Log File - Last 25 Lines *** 2025-07-16 00:19:31.687 - info: host.raspberrypi iobroker gyp ERR! cwd /opt/iobroker/node_modules/opengpiogyp ERR! node -v v20.19.1gyp ERR! node-gyp -v v10.1.0gyp ERR! not ok 2025-07-16 00:19:31.836 - info: host.raspberrypi iobroker npm error code 1 2025-07-16 00:19:31.839 - info: host.raspberrypi iobroker npm error path /opt/iobroker/node_modules/opengpionpm error command failednpm error command sh -c node-gyp rebuild 2025-07-16 00:19:31.850 - info: host.raspberrypi iobroker npm error A complete log of this run can be found in: /home/iobroker/.npm/_logs/2025-07-15T22_18_28_400Z-debug-0.log 2025-07-16 00:19:31.890 - error: host.raspberrypi iobroker gyp info it worked if it ends with okgyp info using node-gyp@10.1.0gyp info using node@20.19.1 | linux | armgyp info find Python using Python version 3.9.2 found at "/usr/bin/python3"gyp info spawn /usr/bin/python3gyp info spawn args [gyp info spawn args '/usr/lib/node_modules/npm/node_modules/node-gyp/gyp/gyp_main.py',gyp info spawn args 'binding.gyp',gyp info spawn args '-f',gyp info spawn args 'make',gyp info spawn args '-I',gyp info spawn args '/opt/iobroker/node_modules/diskusage/build/config.gypi',gyp info spawn args '-I',gyp info spawn args '/usr/lib/node_modules/npm/node_modules/node-gyp/addon.gypi',gyp info spawn args '-I',gyp info spawn args '/home/iobroker/.cache/node-gyp/20.19.1/include/node/common.gypi',gyp info spawn args '-Dlibrary=shared_library',gyp info spawn args '-Dvisibility=default',gyp info spawn args '-Dnode_root_dir=/home/iobroker/.cache/node-gyp/20.19.1',gyp info spawn args '-Dnode_gyp_dir=/usr/lib/node_modules/npm/node_modules/node-gyp',gyp info spawn args '-Dnode_lib_file=/home/iobroker/.cache/node-gyp/20.19.1/<(target_arch)/node.lib',gyp info spawn args '-Dmodule_root_dir=/opt/iobroker/node_modules/diskusage',gyp info spawn args '-Dnode_engine=v8',gyp info spawn args '--depth=.',gyp info spawn args '--no-parallel',gyp info spawn args '--generator-output',gyp info spawn args 'build',gyp info spawn args '-Goutput_dir=.'gyp info spawn args ]gyp info spawn makegyp info spawn args [ 'BUILDTYPE=Release', '-C', 'build' ]<command-line>: warning: "_GLIBCXX_USE_CXX11_ABI" redefined<command-line>: note: this is the location of the previous definitionIn file included from ../../nan/nan.h:62, from ../src/main.cpp:3:/home/iobroker/.cache/node-gyp/20.19.1/include/node/node.h:1226:7: warning: cast between incompatible function types from 'void (*)(v8::Local<v8::Object>)' to 'node::addon_register_func' {aka 'void (*)(v8::Local<v8::Object>, v8::Local<v8::Value>, void*)'} [-Wcast-function-type] 1226 | (node::addon_register_func) (regfunc), \ | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~/home/iobroker/.cache/node-gyp/20.19.1/include/node/node.h:1260:3: note: in expansion of macro 'NODE_MODULE_X' 1260 | NODE_MODULE_X(modname, regfunc, NULL, 0) // NOLINT (readability/null_usage) | ^~~~~~~~~~~~~../src/main.cpp:42:1: note: in expansion of macro 'NODE_MODULE' 42 | NODE_MODULE(diskusage, Init) | ^~~~~~~~~~~<command-line>: warning: "_GLIBCXX_USE_CXX11_ABI" redefined<command-line>: note: this is the location of the previous definition/usr/lib/gcc/arm-linux-gnueabihf/10/crtbeginS.o: file not recognized: file format not recognizedcollect2: error: ld returned 1 exit statusmake: *** [diskusage.target.mk:135: Release/obj.target/diskusage.node] Error 1gyp ERR! build error gyp ERR! stack Error: `make` failed with exit code: 2gyp ERR! stack at ChildProcess.<anonymous> (/usr/lib/node_modules/npm/node_modules/node-gyp/lib/build.js:209:23)gyp ERR! System Linux 6.1.21-v7+gyp ERR! command "/usr/bin/node" "/usr/lib/node_modules/npm/node_modules/node-gyp/bin/node-gyp.js" "rebuild"gyp ERR! cwd /opt/iobroker/node_modules/diskusagegyp ERR! node -v v20.19.1gyp ERR! node-gyp -v v10.1.0gyp ERR! not ok gyp info it worked if it ends with okgyp info using node-gyp@10.1.0gyp info using node@20.19.1 | linux | armgyp info find Python using Python version 3.9.2 found at "/usr/bin/python3"gyp info spawn /usr/bin/python3gyp info spawn args [gyp info spawn args '/usr/lib/node_modules/npm/node_modules/node-gyp/gyp/gyp_main.py',gyp info spawn args 'binding.gyp',gyp info spawn args '-f',gyp info spawn args 'make',gyp info spawn args '-I',gyp info spawn args '/opt/iobroker/node_modules/node-dht-sensor/build/config.gypi',gyp info spawn args '-I',gyp info spawn args '/usr/lib/node_modules/npm/node_modules/node-gyp/addon.gypi',gyp info spawn args '-I',gyp info spawn args '/home/iobroker/.cache/node-gyp/20.19.1/include/node/common.gypi',gyp info spawn args '-Dlibrary=shared_library',gyp info spawn args '-Dvisibility=default',gyp info spawn args '-Dnode_root_dir=/home/iobroker/.cache/node-gyp/20.19.1',gyp info spawn args '-Dnode_gyp_dir=/usr/lib/node_modules/npm/node_modules/node-gyp',gyp info spawn args '-Dnode_lib_file=/home/iobroker/.cache/node-gyp/20.19.1/<(target_arch)/node.lib',gyp info spawn args '-Dmodule_root_dir=/opt/iobroker/node_modules/node-dht-sensor',gyp info spawn args '-Dnode_engine=v8',gyp info spawn args '--depth=.',gyp info spawn args '--no-parallel',gyp info spawn args '--generator-output',gyp info spawn args 'build',gyp info spawn args '-Goutput_dir=.'gyp info spawn args ]gyp info ok gyp info it worked if it ends with okgyp info using node-gyp@10.1.0gyp info using node@20.19.1 | linux | armgyp info find Python using Python version 3.9.2 found at "/usr/bin/python3"gyp info spawn /usr/bin/python3gyp info spawn args [gyp info spawn args '/usr/lib/node_modules/npm/node_modules/node-gyp/gyp/gyp_main.py',gyp info spawn args 'binding.gyp',gyp info spawn args '-f',gyp info spawn args 'make',gyp info spawn args '-I',gyp info spawn args '/opt/iobroker/node_modules/opengpio/build/config.gypi',gyp info spawn args '-I',gyp info spawn args '/usr/lib/node_modules/npm/node_modules/node-gyp/addon.gypi',gyp info spawn args '-I',gyp info spawn args '/home/iobroker/.cache/node-gyp/20.19.1/include/node/common.gypi',gyp info spawn args '-Dlibrary=shared_library',gyp info spawn args '-Dvisibility=default',gyp info spawn args '-Dnode_root_dir=/home/iobroker/.cache/node-gyp/20.19.1',gyp info spawn args '-Dnode_gyp_dir=/usr/lib/node_modules/npm/node_modules/node-gyp',gyp info spawn args '-Dnode_lib_file=/home/iobroker/.cache/node-gyp/20.19.1/<(target_arch)/node.lib',gyp info spawn args '-Dmodule_root_dir=/opt/iobroker/node_modules/opengpio',gyp info spawn args '-Dnode_engine=v8',gyp info spawn args '--depth=.',gyp info spawn args '--no-parallel',gyp info spawn args '--generator-output',gyp info spawn args 'build',gyp info spawn args '-Goutput_dir=.'gyp info spawn args ]gyp info spawn makegyp info spawn args [ 'BUILDTYPE=Release', '-C', 'build' ]/usr/lib/gcc/arm-linux-gnueabihf/10/crtbeginS.o: file not recognized: file format not recognizedcollect2: error: ld returned 1 exit statusmake: *** [opengpio.target.mk:133: Release/obj.target/opengpio.node] Error 1gyp ERR! build error gyp ERR! stack Error: `make` failed with exit code: 2gyp ERR! stack at ChildProcess.<anonymous> (/usr/lib/node_modules/npm/node_modules/node-gyp/lib/build.js:209:23)gyp ERR! System Linux 6.1.21-v7+gyp ERR! command "/usr/bin/node" "/usr/lib/node_modules/npm/node_modules/node-gyp/bin/node-gyp.js" "rebuild"gyp ERR! cwd /opt/iobroker/node_modules/opengpiogyp ERR! node -v v20.19.1gyp ERR! node-gyp -v v10.1.0gyp ERR! not ok npm error code 1npm error path /opt/iobroker/node_modules/opengpionpm error command failednpm error command sh -c node-gyp rebuildnpm error A complete log of this run can be found in: /home/iobroker/.npm/_logs/2025-07-15T22_18_28_400Z-debug-0.log 2025-07-16 00:19:31.893 - error: host.raspberrypi iobroker host.raspberrypi Cannot install iobroker.rpi2@2.4.0: 1 2025-07-16 00:19:32.961 - info: host.raspberrypi iobroker exit 25 2025-07-16 00:22:15.158 - info: admin.0 (21989) <== Disconnect system.user.admin from ::ffff:192.168.1.3 admin 2025-07-16 00:22:17.669 - info: admin.0 (21989) ==> Connected system.user.admin from ::ffff:192.168.1.3 2025-07-16 00:32:36.623 - info: admin.0 (21989) <== Disconnect system.user.admin from ::ffff:192.168.1.3 admin 2025-07-16 00:32:36.881 - info: admin.0 (21989) ==> Connected system.user.admin from ::ffff:192.168.1.3 2025-07-16 00:32:36.925 - info: admin.0 (21989) <== Disconnect system.user.admin from ::ffff:192.168.1.3 admin 2025-07-16 00:32:39.394 - info: admin.0 (21989) ==> Connected system.user.admin from ::ffff:192.168.1.3 2025-07-16 00:38:54.719 - info: host.raspberrypi iobroker add rpi2 --host raspberrypi 2025-07-16 00:39:02.488 - info: host.raspberrypi iobroker NPM version: 10.8.2 2025-07-16 00:39:02.492 - info: host.raspberrypi iobroker Installing iobroker.rpi2@2.4.0... (System call) 2025-07-16 00:40:08.220 - error: host.raspberrypi iobroker npm error code 1npm error path /opt/iobroker/node_modules/opengpionpm error command failednpm error command sh -c node-gyp rebuildnpm error make: Entering directory '/opt/iobroker/node_modules/opengpio/build'npm error CXX(target) Release/obj.target/opengpio/cpp/opengpio.onpm error SOLINK_MODULE(target) Release/obj.target/opengpio.nodenpm error make: Leaving directory '/opt/iobroker/node_modules/opengpio/build'npm error /usr/lib/gcc/arm-linux-gnueabihf/10/crtbeginS.o: file not recognized: file format not recognizednpm error collect2: error: ld returned 1 exit statusnpm error make: *** [opengpio.target.mk:133: Release/obj.target/opengpio.node] Error 1npm error gyp ERR! build error npm error gyp ERR! stack Error: `make` failed with exit code: 2npm error gyp ERR! stack at ChildProcess.<anonymous> (/usr/lib/node_modules/npm/node_modules/node-gyp/lib/build.js:209:23)npm error gyp ERR! System Linux 6.1.21-v7+npm error gyp ERR! command "/usr/bin/node" "/usr/lib/node_modules/npm/node_modules/node-gyp/bin/node-gyp.js" "rebuild"npm error gyp ERR! cwd /opt/iobroker/node_modules/opengpionpm error gyp ERR! node -v v20.19.1npm error gyp ERR! node-gyp -v v10.1.0npm error gyp ERR! not oknpm error A complete log of this run can be found in: /home/iobroker/.npm/_logs/2025-07-15T22_39_03_166Z-debug-0.log 2025-07-16 00:40:08.225 - error: host.raspberrypi iobroker host.raspberrypi Cannot install iobroker.rpi2@2.4.0: 1 2025-07-16 00:40:09.283 - info: host.raspberrypi iobroker exit 25 2025-07-16 00:45:05.391 - error: host.raspberrypi Cannot read disk size: Could not determine controller directory 2025-07-16 00:51:31.884 - info: admin.0 (21989) <== Disconnect system.user.admin from ::ffff:192.168.1.3 admin 2025-07-16 09:44:56.397 - info: admin.0 (21989) ==> Connected system.user.admin from ::ffff:192.168.1.3 2025-07-16 09:48:30.566 - info: admin.0 (21989) <== Disconnect system.user.admin from ::ffff:192.168.1.3 admin 2025-07-16 09:49:23.357 - info: admin.0 (21989) ==> Connected system.user.admin from ::ffff:192.168.1.3 2025-07-16 09:49:23.955 - info: admin.0 (21989) <== Disconnect system.user.admin from ::ffff:192.168.1.3 admin============ Mark until here for C&P =============
iob diag has finished.
pi@raspberrypi:~ $ obroker fix
-bash: obroker: command not found
pi@raspberrypi:~ $```pi@raspberrypi:~ $ apt policy libgpiod* libgpiod-dev: Installed: 1.6.2-1+rpi1 Candidate: 1.6.2-1+rpi1 Version table: *** 1.6.2-1+rpi1 500 500 http://raspbian.raspberrypi.org/raspbian bullseye/main armhf Packages 100 /var/lib/dpkg/status libgpiod-doc: Installed: (none) Candidate: 1.6.2-1+rpi1 Version table: 1.6.2-1+rpi1 500 500 http://raspbian.raspberrypi.org/raspbian bullseye/main armhf Packages libgpiod2: Installed: 1.6.2-1+rpi1 Candidate: 1.6.2-1+rpi1 Version table: *** 1.6.2-1+rpi1 500 500 http://raspbian.raspberrypi.org/raspbian bullseye/main armhf Packages 100 /var/lib/dpkg/status -
@basti97 sagte in Kann den Rpi Adapter auf meinem Raspberry nicht installieren:
144 CRITICAL ERRORS DETECTED!
Setz das Ding komplett neu auf, diesmal direkt als RaspberryOS 12 'Lite - 64Bit'.
-
@thomas-braun Und dann funktoniert es oder?
Das komische daran ist ich hatte den Rpi vorher als Slave laufen gehabt. Das hatte ich vor längeren mal so eingestellt und er wurde auch gleich wieder erkannt und ich konnte die gpios auch steuern. Ich hatte den Verbund nicht auseinander gemacht und iobroker deinstalliert und alles neu installiert. Danach konnte ich den rpi Adapter nicht mehr installieren. -
@basti97 sagte in Kann den Rpi Adapter auf meinem Raspberry nicht installieren:
Und dann funktoniert es oder?
Kann ich dir nicht sagen. Aber zumindest ist dann die Ausgangslage eine stabile.
-
@thomas-braun dann probiere ich das mal vielen Dank für deine Hilfe
-
auch wenn Thomas mich (zurecht) haut, kannst du, solange du Bullseye (also das Raspian, was du gerade drauf hast) noch drauf lässt (Sicherheitsrisiko, da EOL, entweder schon oder sehr bald...) die letzte 1.x Version vom rpi2 Adapter nehmen, also 1.3.2. (z.B. mit
iob upgrade rpi2@1.3.2installieren).Wenns tatsächlich nur um ein bisschen Spielen für das Kind geht, ist das vielleicht die einfacherere Lösung.
Aber auf lange Sicht, neues System und neuen Adapter (aber vermutlich bald auch neuen PI, wenn der was tun soll).
-
Aber auch dem Nachwuchs würde ich da ein frisches System hinsetzen. Ich verstehe auch gar nicht, worin die Mega-Hürde hier bestehen soll. Offenbar ist das Ding ja verfügbar, da kann man ja wohl auch ein frisches System draufbügeln.
Und für Spielereien mit LEDs und GPIOs braucht es auch keinen rpi2-Adapter/ioBroker.
Da wird man mehr lernen, wenn man die GPIOs direkt über das OS anspricht.
