IoBroker mach nur noch Probleme
-
Moin Forum,
ich habe mal wieder große Probleme!!!
Admin stürzt immer wieder ab und lässt sich nur mit einer neuen Instanz oder einem restart kurzfristig zum laufen bringen.
Immer mal wieder muss ich auch ioBroker neu starten
ioBroker läuft bei mir auf 2 Pi und auf einem Synology NAS
Vorab auf dem NAS läuft npm 5 bekomme ich beim NAS nicht mehr auf Version 4.6.1, bleibt leider auf 5 (ist das der Fehler??)
Befehl : sudo npm install -g npm@4.6.1 Läuft richtig durch, npm -v zeigt weiterhin 5 an
Ich bitte um Hilfe. Ist schon der 3. Sonntag an dem ich es laut vorhandenen Forums Beiträgen alleine versuche
950_iobroker1.jpg
950_iobroker2.jpg
950_iobroker3.jpg -
Wie stehen die 3 Hosts zueinander (wer ist Master und wer ist Slave)?
Warum wird bei der mittleren Maschine ein CPU-Speed von 0 angezeigt?
Die Fehlermeldung deuten darauf hin (wie es da ja auch steht), das die Adapter mehrfach gestartet werden.
Gruß,
Eric
Von unterwegs getippert
-
Du schreibst von einem Restart, der auch nur kurz hilft. Startest du dabei alle Hosts neu, oder nur den Master?
Die Fehlermeldung kommt ja scheinbar von einem Slave, ist der auch schonmal neugestartet worden?
Bei mir hilft es manchmal auch einfach die gemeldeten Instanzen von Hand zu stoppen und wieder zu starten.
@eric: Kann es sein, dass die CPU nicht erkannt bzw. nicht richtig ausgelesen wird, weil es keine ARM-CPU ist?
Enrico
-
@eric: Kann es sein, dass die CPU nicht erkannt bzw. nicht richtig ausgelesen wird, weil es keine ARM-CPU ist? `
Möglich ist das schon.Bzgl. Neustart:
Laut Screenshot wurden 2 Maschinen relativ zeitnah neu gestartet, die dritte läuft seit einigen Tagen.
Also kein Neustart aller Maschinen.
Gruß,
Eric
Von unterwegs getippert
-
Und npm 5.6.0 ist dafür bekannt, das er sehr fehleranfällig ist und unbedingt durch eine ältere oder neuere (5.7.1 +) ersetzt werden muss.
Eine Neuinstallation mit npm 5.6.0 wird sogar vom Setup verweigert.
Gruß,
Eric
Von unterwegs getippert
-
Erst einmal vielen dank für die Antworten!
1. Mittlere Host ist der NAS " Marvell PJ4Bv7 Processor " (Funktionierte auch lange Zeit Gut)
2. Ja habe alles und in jeder Art und Weise neu gestartet
3. Master ist der raspberrypi, Nasserver und ioBroker-Pi3-slave-sw sind die Slaves
-
hier noch mal der Log von heute
2018-10-07 07:35:52.639 - info: host.raspberrypi iobroker.js-controller version 1.4.2 js-controller starting 2018-10-07 07:35:52.659 - info: host.raspberrypi Copyright (c) 2014-2018 bluefox, 2014 hobbyquaker 2018-10-07 07:35:52.660 - info: host.raspberrypi hostname: raspberrypi, node: v8.11.4 2018-10-07 07:35:52.671 - info: host.raspberrypi ip addresses: 192.168.168.222 fe80::8bcf:e410:ed6f:584a 2018-10-07 07:35:54.169 - info: host.raspberrypi inMem-states listening on port 9000 2018-10-07 07:36:06.112 - info: host.raspberrypi inMem-objects listening on port 9001 2018-10-07 07:36:06.156 - info: host.raspberrypi InMemoryDB connected 2018-10-07 07:36:06.484 - info: host.raspberrypi 61 instances found 2018-10-07 07:36:06.564 - info: host.raspberrypi starting 4 instances 2018-10-07 07:36:06.792 - info: host.raspberrypi instance system.adapter.admin.11 started with pid 1159 2018-10-07 07:36:10.620 - info: host.raspberrypi instance system.adapter.email.0 started with pid 1165 2018-10-07 07:36:15.026 - info: host.raspberrypi instance system.adapter.harmony.0 started with pid 1173 2018-10-07 07:36:16.012 - info: email.0 starting. Version 1.0.2 in /opt/iobroker/node_modules/iobroker.email, node: v8.11.4 2018-10-07 07:36:21.479 - info: host.raspberrypi instance system.adapter.zigbee.0 started with pid 1183 2018-10-07 07:36:24.202 - error: harmony.0 no connection to objects DB 2018-10-07 07:36:27.802 - info: admin.11 starting. Version 3.4.7 in /opt/iobroker/node_modules/iobroker.admin, node: v8.11.4 2018-10-07 07:36:28.501 - info: admin.11 requesting all states 2018-10-07 07:36:28.509 - info: admin.11 requesting all objects 2018-10-07 07:36:28.513 - info: admin.11 Request actual repository... 2018-10-07 07:36:34.914 - error: zigbee.0 no connection to objects DB 2018-10-07 07:36:38.374 - info: harmony.0 starting. Version 0.9.3 in /opt/iobroker/node_modules/iobroker.harmony, node: v8.11.4 2018-10-07 07:36:38.424 - info: harmony.0 searching for Harmony Hubs... 2018-10-07 07:36:39.760 - info: harmony.0 discovered Remote-Hub-Wohnzimmer 2018-10-07 07:36:43.109 - error: zigbee.0 no connection to states DB: Connection timeout 2018-10-07 07:37:28.773 - warn: harmony.0 Reconnection to DB. 2018-10-07 07:37:28.779 - warn: harmony.0 Reconnection to DB. 2018-10-07 07:37:29.392 - error: email.0 already running 2018-10-07 07:37:29.398 - error: harmony.0 already running 2018-10-07 07:37:29.799 - error: host.raspberrypi instance system.adapter.email.0 terminated with code 7 (Adapter already running) 2018-10-07 07:37:29.800 - info: host.raspberrypi Restart adapter system.adapter.email.0 because enabled 2018-10-07 07:37:29.898 - error: host.raspberrypi instance system.adapter.harmony.0 terminated with code 7 (Adapter already running) 2018-10-07 07:37:29.899 - info: host.raspberrypi Restart adapter system.adapter.harmony.0 because enabled 2018-10-07 07:37:30.153 - info: zigbee.0 starting. Version 0.7.1 in /opt/iobroker/node_modules/iobroker.zigbee, node: v8.11.4 2018-10-07 07:37:30.165 - info: zigbee.0 Start on port: /dev/serial/by-id/usb-Texas_Instruments_TI_CC2531_USB_CDC___0X00124B0018E1CD67-if00 with panID 6754 channel 11 2018-10-07 07:37:30.365 - info: zigbee.0 starting. Version 0.7.1 in /opt/iobroker/node_modules/iobroker.zigbee, node: v8.11.4 2018-10-07 07:37:30.369 - info: zigbee.0 Start on port: /dev/serial/by-id/usb-Texas_Instruments_TI_CC2531_USB_CDC___0X00124B0018E1CD67-if00 with panID 6754 channel 11 2018-10-07 07:37:31.018 - error: zigbee.0 uncaught exception: ENOENT: no such file or directory, rename '/opt/iobroker/node_modules/iobroker.js-controller/../../iobroker-data/zigbee_0/shepherd.db~' -> '/opt/iobroker/node_modules/iobroker.js-controller/../../iobroker-data/zigbee_0/shepherd.db' 2018-10-07 07:37:31.019 - error: zigbee.0 Error: ENOENT: no such file or directory, rename '/opt/iobroker/node_modules/iobroker.js-controller/../../iobroker-data/zigbee_0/shepherd.db~' -> '/opt/iobroker/node_modules/iobroker.js-controller/../../iobroker-data/zigbee_0/shepherd.db' 2018-10-07 07:37:31.029 - info: zigbee.0 zigbee-shepherd stopped 2018-10-07 07:37:31.058 - info: zigbee.0 terminating 2018-10-07 07:37:31.255 - error: Caught by controller[0]: Sun, 07 Oct 2018 07:37:30 GMT zigbee-shepherd:init zigbee-shepherd booting... 2018-10-07 07:37:31.256 - error: Caught by controller[0]: Sun, 07 Oct 2018 07:37:30 GMT cc-znp The serialport /dev/serial/by-id/usb-Texas_Instruments_TI_CC2531_USB_CDC___0X00124B0018E1CD67-if00 is opened. 2018-10-07 07:37:31.256 - error: Caught by controller[0]: Sun, 07 Oct 2018 07:37:30 GMT zigbee-shepherd:request REQ --> SYS:osalNvRead 2018-10-07 07:37:31.256 - error: Caught by controller[0]: Sun, 07 Oct 2018 07:37:30 GMT cc-znp:SREQ --> SYS:osalNvRead, { id: 3840, offset: 0, len: 1, value: [ 85 ] } 2018-10-07 07:37:31.257 - error: Caught by controller[0]: Sun, 07 Oct 2018 07:37:30 GMT zigbee-shepherd:init zigbee-shepherd booting... 2018-10-07 07:37:31.257 - error: Caught by controller[0]: Sun, 07 Oct 2018 07:37:30 GMT zigbee:controller debug Error while starting zigbee-shepherd, attemping to fix... (takes 60 seconds) undefined 2018-10-07 07:37:31.257 - error: Caught by controller[0]: { Error: ENOENT: no such file or directory, rename '/opt/iobroker/node_modules/iobroker.js-controller/../../iobroker-data/zigbee_0/shepherd.db~' -> '/opt/iobroker/node_modules/iobroker.js-controller/../../iobroker-data/zigbee_0/shepherd.db' 2018-10-07 07:37:31.258 - error: Caught by controller[0]: errno: -2, 2018-10-07 07:37:31.258 - error: Caught by controller[0]: code: 'ENOENT', 2018-10-07 07:37:31.258 - error: Caught by controller[0]: syscall: 'rename', 2018-10-07 07:37:31.259 - error: Caught by controller[0]: path: '/opt/iobroker/node_modules/iobroker.js-controller/../../iobroker-data/zigbee_0/shepherd.db~', 2018-10-07 07:37:31.259 - error: Caught by controller[0]: dest: '/opt/iobroker/node_modules/iobroker.js-controller/../../iobroker-data/zigbee_0/shepherd.db' } 2018-10-07 07:37:31.259 - error: Caught by controller[0]: Sun, 07 Oct 2018 07:37:31 GMT zigbee:controller info zigbee-shepherd stopped undefined 2018-10-07 07:37:31.260 - error: host.raspberrypi instance system.adapter.zigbee.0 terminated with code 0 (OK) 2018-10-07 07:37:31.260 - info: host.raspberrypi Restart adapter system.adapter.zigbee.0 because enabled 2018-10-07 07:37:31.537 - warn: admin.11 Reconnection to DB. 2018-10-07 07:37:31.553 - warn: admin.11 Reconnection to DB. 2018-10-07 07:37:33.586 - error: admin.11 already running 2018-10-07 07:37:33.668 - error: host.raspberrypi instance system.adapter.admin.11 terminated with code 7 (Adapter already running) 2018-10-07 07:37:33.669 - info: host.raspberrypi Restart adapter system.adapter.admin.11 because enabled 2018-10-07 07:37:59.848 - info: host.raspberrypi instance system.adapter.email.0 started with pid 1255 2018-10-07 07:37:59.960 - info: host.raspberrypi instance system.adapter.harmony.0 started with pid 1261 2018-10-07 07:38:01.357 - info: host.raspberrypi instance system.adapter.zigbee.0 started with pid 1267 2018-10-07 07:38:03.230 - info: email.0 starting. Version 1.0.2 in /opt/iobroker/node_modules/iobroker.email, node: v8.11.4 2018-10-07 07:38:05.067 - info: host.raspberrypi instance system.adapter.admin.11 started with pid 1277 2018-10-07 07:38:05.948 - info: harmony.0 starting. Version 0.9.3 in /opt/iobroker/node_modules/iobroker.harmony, node: v8.11.4 2018-10-07 07:38:06.020 - info: harmony.0 searching for Harmony Hubs... 2018-10-07 07:38:05.978 - info: zigbee.0 starting. Version 0.7.1 in /opt/iobroker/node_modules/iobroker.zigbee, node: v8.11.4 2018-10-07 07:38:07.310 - info: harmony.0 discovered Remote-Hub-Wohnzimmer 2018-10-07 07:38:06.004 - info: zigbee.0 Start on port: /dev/serial/by-id/usb-Texas_Instruments_TI_CC2531_USB_CDC___0X00124B0018E1CD67-if00 with panID 6754 channel 11 2018-10-07 07:38:11.989 - info: zigbee.0 zigbee-shepherd started! 2018-10-07 07:38:12.003 - info: zigbee.0 zigbee-shepherd ready 2018-10-07 07:38:12.022 - info: zigbee.0 (0x00158d0001e148e6): RTCGQ01LM - Xiaomi MiJia human body movement sensor (EndDevice) 2018-10-07 07:38:14.570 - error: admin.11 no connection to objects DB 2018-10-07 07:38:15.346 - info: harmony.0 connecting to Remote-Hub-Wohnzimmer 2018-10-07 07:38:16.898 - info: admin.11 starting. Version 3.4.7 in /opt/iobroker/node_modules/iobroker.admin, node: v8.11.4 2018-10-07 07:38:17.415 - info: admin.11 requesting all states 2018-10-07 07:38:17.424 - info: admin.11 requesting all objects 2018-10-07 07:38:17.441 - info: admin.11 Request actual repository... 2018-10-07 07:38:17.797 - info: harmony.0 connected to Remote-Hub-Wohnzimmer 2018-10-07 07:38:18.900 - info: harmony.0 synced hub config 2018-10-07 07:38:39.381 - info: admin.11 received all states 2018-10-07 07:38:51.898 - warn: admin.11 Reconnection to DB. 2018-10-07 07:38:51.907 - warn: admin.11 Reconnection to DB. 2018-10-07 07:40:15.502 - info: host.raspberrypi object change system.adapter.admin.12 2018-10-07 07:40:30.048 - error: admin.11 already running 2018-10-07 07:40:30.558 - error: host.raspberrypi instance system.adapter.admin.11 terminated with code 7 (Adapter already running) 2018-10-07 07:40:30.559 - info: host.raspberrypi Restart adapter system.adapter.admin.11 because enabled 2018-10-07 07:40:59.402 - info: host.raspberrypi Update repository "default" under "http://download.iobroker.net/sources-dist.json" 2018-10-07 07:41:01.350 - info: host.raspberrypi instance system.adapter.admin.11 started with pid 1312 2018-10-07 07:41:09.754 - info: admin.11 starting. Version 3.4.7 in /opt/iobroker/node_modules/iobroker.admin, node: v8.11.4 2018-10-07 07:41:10.031 - info: admin.11 requesting all states 2018-10-07 07:41:10.037 - info: admin.11 requesting all objects 2018-10-07 07:41:10.040 - info: admin.11 Request actual repository... 2018-10-07 07:41:27.197 - warn: host.raspberrypi some hosts are offline 2018-10-07 07:41:42.361 - warn: email.0 Reconnection to DB. 2018-10-07 07:41:42.368 - warn: email.0 Reconnection to DB. 2018-10-07 07:41:42.386 - warn: zigbee.0 Reconnection to DB. 2018-10-07 07:41:42.391 - warn: harmony.0 Reconnection to DB. 2018-10-07 07:41:42.399 - warn: harmony.0 Reconnection to DB. 2018-10-07 07:41:42.398 - warn: zigbee.0 Reconnection to DB. 2018-10-07 07:41:42.430 - warn: admin.11 Reconnection to DB. 2018-10-07 07:41:42.438 - warn: admin.11 Reconnection to DB. 2018-10-07 07:41:42.567 - error: email.0 already running 2018-10-07 07:41:42.626 - error: zigbee.0 already running 2018-10-07 07:41:42.641 - error: harmony.0 already running 2018-10-07 07:41:43.201 - error: host.raspberrypi instance system.adapter.email.0 terminated with code 7 (Adapter already running) 2018-10-07 07:41:43.202 - info: host.raspberrypi Restart adapter system.adapter.email.0 because enabled 2018-10-07 07:41:43.257 - error: host.raspberrypi instance system.adapter.harmony.0 terminated with code 7 (Adapter already running) 2018-10-07 07:41:43.257 - info: host.raspberrypi Restart adapter system.adapter.harmony.0 because enabled 2018-10-07 07:41:43.311 - error: host.raspberrypi instance system.adapter.zigbee.0 terminated with code 7 (Adapter already running) 2018-10-07 07:41:43.312 - info: host.raspberrypi Restart adapter system.adapter.zigbee.0 because enabled 2018-10-07 07:41:43.426 - error: admin.11 already running 2018-10-07 07:41:45.937 - error: host.raspberrypi instance system.adapter.admin.11 terminated with code 7 (Adapter already running) 2018-10-07 07:41:45.938 - info: host.raspberrypi Restart adapter system.adapter.admin.11 because enabled 2018-10-07 07:42:17.923 - info: host.raspberrypi instance system.adapter.email.0 started with pid 1324 2018-10-07 07:42:18.025 - info: host.raspberrypi instance system.adapter.harmony.0 started with pid 1330 2018-10-07 07:42:18.127 - info: host.raspberrypi instance system.adapter.zigbee.0 started with pid 1335 2018-10-07 07:42:18.237 - info: host.raspberrypi instance system.adapter.admin.11 started with pid 1341 2018-10-07 07:42:25.888 - info: email.0 starting. Version 1.0.2 in /opt/iobroker/node_modules/iobroker.email, node: v8.11.4 2018-10-07 07:42:28.082 - info: harmony.0 starting. Version 0.9.3 in /opt/iobroker/node_modules/iobroker.harmony, node: v8.11.4 2018-10-07 07:42:28.202 - info: harmony.0 searching for Harmony Hubs... 2018-10-07 07:42:28.075 - info: zigbee.0 starting. Version 0.7.1 in /opt/iobroker/node_modules/iobroker.zigbee, node: v8.11.4 2018-10-07 07:42:28.150 - info: zigbee.0 Start on port: /dev/serial/by-id/usb-Texas_Instruments_TI_CC2531_USB_CDC___0X00124B0018E1CD67-if00 with panID 6754 channel 11 2018-10-07 07:42:29.188 - info: admin.11 starting. Version 3.4.7 in /opt/iobroker/node_modules/iobroker.admin, node: v8.11.4 2018-10-07 07:42:29.490 - info: harmony.0 discovered Remote-Hub-Wohnzimmer 2018-10-07 07:42:29.550 - info: admin.11 requesting all states 2018-10-07 07:42:29.577 - info: admin.11 requesting all objects 2018-10-07 07:42:29.592 - info: admin.11 Request actual repository... 2018-10-07 07:42:29.747 - info: zigbee.0 zigbee-shepherd started! 2018-10-07 07:42:29.764 - info: zigbee.0 zigbee-shepherd ready 2018-10-07 07:42:29.782 - info: zigbee.0 (0x00158d0001e148e6): RTCGQ01LM - Xiaomi MiJia human body movement sensor (EndDevice) 2018-10-07 07:42:35.071 - info: harmony.0 connecting to Remote-Hub-Wohnzimmer 2018-10-07 07:42:37.629 - info: harmony.0 connected to Remote-Hub-Wohnzimmer 2018-10-07 07:42:38.710 - info: harmony.0 synced hub config 2018-10-07 07:42:56.704 - warn: admin.11 Reconnection to DB. 2018-10-07 07:42:56.752 - warn: admin.11 Reconnection to DB. 2018-10-07 07:43:05.973 - error: admin.11 already running 2018-10-07 07:43:06.471 - error: host.raspberrypi instance system.adapter.admin.11 terminated with code 7 (Adapter already running) 2018-10-07 07:43:06.473 - info: host.raspberrypi Restart adapter system.adapter.admin.11 because enabled 2018-10-07 07:43:26.997 - warn: host.raspberrypi too delayed answer for ioBroker-Pi3-slave-sw 2018-10-07 07:43:37.199 - info: host.raspberrypi instance system.adapter.admin.11 started with pid 1365 2018-10-07 07:43:42.357 - info: admin.11 starting. Version 3.4.7 in /opt/iobroker/node_modules/iobroker.admin, node: v8.11.4 2018-10-07 07:43:42.719 - info: admin.11 requesting all states 2018-10-07 07:43:42.727 - info: admin.11 requesting all objects 2018-10-07 07:43:42.731 - info: admin.11 Request actual repository... 2018-10-07 07:43:56.786 - info: admin.11 received all states 2018-10-07 07:44:07.512 - info: admin.11 received all objects 2018-10-07 07:44:08.153 - info: admin.11 http server listening on port 8086 2018-10-07 07:44:08.154 - info: admin.11 Use link "http://localhost:8086" to configure. 2018-10-07 07:44:08.613 - info: host.raspberrypi Update repository "default" under "http://download.iobroker.net/sources-dist.json" 2018-10-07 07:44:13.547 - info: admin.11 Repository received successfully. 2018-10-07 08:04:20.829 - info: host.raspberrypi object change system.adapter.admin.13 2018-10-07 08:07:01.524 - warn: admin.11 Reconnection to DB. 2018-10-07 08:07:01.552 - warn: admin.11 Reconnection to DB. 2018-10-07 08:07:02.028 - error: admin.11 already running 2018-10-07 08:07:02.209 - error: host.raspberrypi instance system.adapter.admin.11 terminated with code 7 (Adapter already running) 2018-10-07 08:07:02.210 - info: host.raspberrypi Restart adapter system.adapter.admin.11 because enabled 2018-10-07 08:07:32.661 - error: uncaught exception: spawn ENOMEM 2018-10-07 08:07:32.914 - info: harmony.0 terminating 2018-10-07 08:07:33.007 - info: zigbee.0 zigbee-shepherd stopped 2018-10-07 08:07:33.354 - error: harmony.0 websocket error 2018-10-07 08:07:33.434 - error: zigbee.0 websocket error 2018-10-07 08:07:33.473 - error: zigbee.0 Error: websocket error at WS.Transport.onError (/opt/iobroker/node_modules/iobroker.js-controller/node_modules/socket.io-client/node_modules/engine.io-client/lib/transport.js:64:13) at WebSocket.ws.onerror (/opt/iobroker/node_modules/iobroker.js-controller/node_modules/socket.io-client/node_modules/engine.io-client/lib/transports/websocket.js:150:10) at WebSocket.onError (/opt/iobroker/node_modules/iobroker.js-controller/node_modules/socket.io-client/node_modules/engine.io-client/node_modules/ws/lib/EventTarget.js:109:16) at emitOne (events.js:116:13) at WebSocket.emit (events.js:211:7) at WebSocket.finalize (/opt/iobroker/node_modules/iobroker.js-controller/node_modules/socket.io-client/node_modules/engine.io-client/node_modules/ws/lib/WebSocket.js:182:41) at emitOne (events.js:116:13) at Socket.emit (events.js:211:7) at onwriteError (_stream_writable.js:418:12) at onwrite (_stream_writable.js:440:5) 2018-10-07 08:07:33.429 - error: harmony.0 Error: websocket error at WS.Transport.onError (/opt/iobroker/node_modules/iobroker.js-controller/node_modules/socket.io-client/node_modules/engine.io-client/lib/transport.js:64:13) at WebSocket.ws.onerror (/opt/iobroker/node_modules/iobroker.js-controller/node_modules/socket.io-client/node_modules/engine.io-client/lib/transports/websocket.js:150:10) at WebSocket.onError (/opt/iobroker/node_modules/iobroker.js-controller/node_modules/socket.io-client/node_modules/engine.io-client/node_modules/ws/lib/EventTarget.js:109:16) at emitOne (events.js:116:13) at WebSocket.emit (events.js:211:7) at WebSocket.finalize (/opt/iobroker/node_modules/iobroker.js-controller/node_modules/socket.io-client/node_modules/engine.io-client/node_modules/ws/lib/WebSocket.js:182:41) at emitOne (events.js:116:13) at Socket.emit (events.js:211:7) at emitErrorNT (internal/streams/destroy.js:64:8) at _combinedTickCallback (internal/process/next_tick.js:138:11) 2018-10-07 08:07:34.421 - info: zigbee.0 terminating with timeout 2018-10-07 08:07:34.464 - info: email.0 terminating with timeout 2018-10-07 08:07:34.560 - info: harmony.0 terminating with timeout 2018-10-07 08:27:07.443 - info: host.raspberrypi iobroker.js-controller version 1.4.2 js-controller starting 2018-10-07 08:27:07.458 - info: host.raspberrypi Copyright (c) 2014-2018 bluefox, 2014 hobbyquaker 2018-10-07 08:27:07.459 - info: host.raspberrypi hostname: raspberrypi, node: v8.11.4 2018-10-07 08:27:07.467 - info: host.raspberrypi ip addresses: 192.168.168.222 fe80::8bcf:e410:ed6f:584a 2018-10-07 08:27:08.165 - info: host.raspberrypi inMem-states listening on port 9000 2018-10-07 08:27:11.569 - info: host.raspberrypi inMem-objects listening on port 9001 2018-10-07 08:27:11.605 - info: host.raspberrypi InMemoryDB connected 2018-10-07 08:27:11.918 - info: host.raspberrypi 64 instances found 2018-10-07 08:27:11.997 - info: host.raspberrypi starting 3 instances 2018-10-07 08:27:12.140 - info: host.raspberrypi instance system.adapter.email.0 started with pid 1614 2018-10-07 08:27:15.308 - info: email.0 starting. Version 1.0.2 in /opt/iobroker/node_modules/iobroker.email, node: v8.11.4 2018-10-07 08:27:16.535 - info: host.raspberrypi instance system.adapter.harmony.0 started with pid 1624 2018-10-07 08:27:20.604 - info: host.raspberrypi instance system.adapter.zigbee.0 started with pid 1630 2018-10-07 08:27:29.355 - error: zigbee.0 no connection to objects DB 2018-10-07 08:27:38.978 - info: zigbee.0 starting. Version 0.7.1 in /opt/iobroker/node_modules/iobroker.zigbee, node: v8.11.4 2018-10-07 08:27:38.990 - info: zigbee.0 Start on port: /dev/serial/by-id/usb-Texas_Instruments_TI_CC2531_USB_CDC___0X00124B0018E1CD67-if00 with panID 6754 channel 11 2018-10-07 08:27:40.611 - info: zigbee.0 zigbee-shepherd started! 2018-10-07 08:27:40.625 - info: zigbee.0 zigbee-shepherd ready 2018-10-07 08:27:40.644 - info: zigbee.0 (0x00158d0001e148e6): RTCGQ01LM - Xiaomi MiJia human body movement sensor (EndDevice) 2018-10-07 08:28:31.863 - info: host.raspberrypi object change system.adapter.admin.10 2018-10-07 08:28:50.254 - info: harmony.0 starting. Version 0.9.3 in /opt/iobroker/node_modules/iobroker.harmony, node: v8.11.4 2018-10-07 08:28:50.340 - info: harmony.0 searching for Harmony Hubs... 2018-10-07 08:28:50.373 - info: harmony.0 starting. Version 0.9.3 in /opt/iobroker/node_modules/iobroker.harmony, node: v8.11.4 2018-10-07 08:28:51.627 - info: harmony.0 discovered Remote-Hub-Wohnzimmer 2018-10-07 08:28:54.197 - info: harmony.0 connecting to Remote-Hub-Wohnzimmer 2018-10-07 08:28:56.761 - info: harmony.0 connected to Remote-Hub-Wohnzimmer 2018-10-07 08:28:59.576 - info: harmony.0 synced hub config 2018-10-07 08:29:57.828 - info: host.raspberrypi object change system.adapter.admin.11 2018-10-07 08:29:57.829 - info: host.raspberrypi "system.adapter.admin.11" enabled 2018-10-07 08:29:57.899 - info: host.raspberrypi instance system.adapter.admin.11 started with pid 1674 2018-10-07 08:30:13.002 - error: admin.11 setObject id missing!! 2018-10-07 08:30:13.030 - info: admin.11 starting. Version 3.5.10 in /opt/iobroker/node_modules/iobroker.admin, node: v8.11.4 2018-10-07 08:30:13.056 - info: admin.11 requesting all states 2018-10-07 08:30:13.061 - info: admin.11 requesting all objects 2018-10-07 08:30:13.064 - info: admin.11 Request actual repository... 2018-10-07 08:30:22.249 - info: admin.11 received all states 2018-10-07 08:30:31.279 - info: admin.11 received all objects 2018-10-07 08:30:32.006 - info: admin.11 http server listening on port 8086 2018-10-07 08:30:32.006 - info: admin.11 Use link "http://localhost:8086" to configure. 2018-10-07 08:30:32.867 - info: host.raspberrypi Update repository "default" under "http://download.iobroker.net/sources-dist.json" 2018-10-07 08:30:38.360 - info: admin.11 Repository received successfully. 2018-10-07 08:31:00.538 - warn: host.raspberrypi some hosts are offline 2018-10-07 08:31:01.092 - warn: host.raspberrypi too delayed answer for ioBroker-Pi3-slave-sw 2018-10-07 08:34:15.194 - info: host.raspberrypi received SIGTERM 2018-10-07 08:34:15.218 - info: admin.11 terminating http server on port 8086 2018-10-07 08:34:15.223 - info: harmony.0 terminating 2018-10-07 08:34:15.201 - info: host.raspberrypi stopInstance system.adapter.sayit.0 2018-10-07 08:34:15.201 - warn: host.raspberrypi stopInstance system.adapter.sayit.0 not running 2018-10-07 08:34:15.202 - info: host.raspberrypi stopInstance system.adapter.email.0 2018-10-07 08:34:15.202 - info: host.raspberrypi stopInstance system.adapter.email.0 killing pid 1614 2018-10-07 08:34:15.204 - info: host.raspberrypi stopInstance system.adapter.rflink.0 2018-10-07 08:34:15.204 - warn: host.raspberrypi stopInstance system.adapter.rflink.0 not running 2018-10-07 08:34:15.205 - info: host.raspberrypi stopInstance system.adapter.tr-064.0 2018-10-07 08:34:15.205 - warn: host.raspberrypi stopInstance system.adapter.tr-064.0 not running 2018-10-07 08:34:15.206 - info: host.raspberrypi stopInstance system.adapter.mobile.0 2018-10-07 08:34:15.206 - info: host.raspberrypi stopInstance system.adapter.s7.0 2018-10-07 08:34:15.206 - warn: host.raspberrypi stopInstance system.adapter.s7.0 not running 2018-10-07 08:34:15.207 - info: host.raspberrypi stopInstance system.adapter.ble.0 2018-10-07 08:34:15.207 - warn: host.raspberrypi stopInstance system.adapter.ble.0 not running 2018-10-07 08:34:15.207 - info: host.raspberrypi stopInstance system.adapter.harmony.0 2018-10-07 08:34:15.208 - info: host.raspberrypi stopInstance system.adapter.harmony.0 killing pid 1624 2018-10-07 08:34:15.208 - info: host.raspberrypi stopInstance system.adapter.zigbee.0 2018-10-07 08:34:15.209 - info: host.raspberrypi stopInstance system.adapter.zigbee.0 killing pid 1630 2018-10-07 08:34:15.210 - info: host.raspberrypi stopInstance system.adapter.admin.11 2018-10-07 08:34:15.210 - info: host.raspberrypi stopInstance system.adapter.admin.11 killing pid 1674 2018-10-07 08:34:15.211 - info: host.raspberrypi stopInstance system.adapter.admin.14 2018-10-07 08:34:15.212 - warn: host.raspberrypi stopInstance system.adapter.admin.14 not running 2018-10-07 08:34:15.247 - info: zigbee.0 zigbee-shepherd stopped 2018-10-07 08:34:15.250 - info: zigbee.0 terminating 2018-10-07 08:34:15.253 - info: admin.11 terminating 2018-10-07 08:34:15.270 - info: harmony.0 terminating 2018-10-07 08:34:15.403 - info: host.raspberrypi instance system.adapter.harmony.0 terminated with code 0 (OK) 2018-10-07 08:34:16.712 - info: email.0 terminating with timeout 2018-10-07 08:34:15.404 - info: host.raspberrypi All instances are stopped. 2018-10-07 08:34:15.513 - error: Caught by controller[1]: Sun, 07 Oct 2018 08:34:15 GMT zigbee-shepherd:request REQ --> ZDO:mgmtPermitJoinReq 2018-10-07 08:34:15.513 - error: Caught by controller[1]: Sun, 07 Oct 2018 08:34:15 GMT cc-znp:SREQ --> ZDO:mgmtPermitJoinReq, { addrmode: 15, dstaddr: 65532, duration: 0, tcsignificance: 0 } 2018-10-07 08:34:15.514 - error: Caught by controller[1]: Sun, 07 Oct 2018 08:34:15 GMT cc-znp The serialport /dev/serial/by-id/usb-Texas_Instruments_TI_CC2531_USB_CDC___0X00124B0018E1CD67-if00 is closed. 2018-10-07 08:34:15.514 - error: Caught by controller[2]: Sun, 07 Oct 2018 08:34:15 GMT zigbee:controller info zigbee-shepherd stopped undefined 2018-10-07 08:34:15.514 - info: host.raspberrypi instance system.adapter.zigbee.0 terminated with code 0 (OK) 2018-10-07 08:34:15.515 - info: host.raspberrypi All instances are stopped. 2018-10-07 08:34:15.591 - info: host.raspberrypi instance system.adapter.admin.11 terminated with code 0 (OK) 2018-10-07 08:34:15.592 - info: host.raspberrypi All instances are stopped. 2018-10-07 08:34:16.950 - info: host.raspberrypi terminated 2018-10-07 08:34:17.387 - info: host.raspberrypi instance system.adapter.email.0 terminated with code 0 (OK) 2018-10-07 08:37:00.358 - info: host.raspberrypi iobroker.js-controller version 1.4.2 js-controller starting 2018-10-07 08:37:00.372 - info: host.raspberrypi Copyright (c) 2014-2018 bluefox, 2014 hobbyquaker 2018-10-07 08:37:00.373 - info: host.raspberrypi hostname: raspberrypi, node: v8.11.4 2018-10-07 08:37:00.381 - info: host.raspberrypi ip addresses: 192.168.168.222 fe80::8bcf:e410:ed6f:584a 2018-10-07 08:37:01.114 - info: host.raspberrypi inMem-states listening on port 9000 2018-10-07 08:37:04.508 - info: host.raspberrypi inMem-objects listening on port 9001 2018-10-07 08:37:04.538 - info: host.raspberrypi InMemoryDB connected 2018-10-07 08:37:04.851 - info: host.raspberrypi 64 instances found 2018-10-07 08:37:04.934 - info: host.raspberrypi starting 4 instances 2018-10-07 08:37:05.162 - info: host.raspberrypi instance system.adapter.admin.11 started with pid 1786 2018-10-07 08:37:09.014 - info: host.raspberrypi instance system.adapter.email.0 started with pid 1792 2018-10-07 08:37:13.011 - info: host.raspberrypi instance system.adapter.harmony.0 started with pid 1798 2018-10-07 08:37:14.299 - info: email.0 starting. Version 1.0.2 in /opt/iobroker/node_modules/iobroker.email, node: v8.11.4 2018-10-07 08:37:14.350 - error: admin.11 setObject id missing!! 2018-10-07 08:37:14.408 - info: admin.11 starting. Version 3.5.10 in /opt/iobroker/node_modules/iobroker.admin, node: v8.11.4 2018-10-07 08:37:15.166 - info: admin.11 requesting all states 2018-10-07 08:37:15.187 - info: admin.11 requesting all objects 2018-10-07 08:37:15.191 - info: admin.11 Request actual repository... 2018-10-07 08:37:20.481 - info: host.raspberrypi instance system.adapter.zigbee.0 started with pid 1812 2018-10-07 08:37:26.485 - info: harmony.0 starting. Version 0.9.3 in /opt/iobroker/node_modules/iobroker.harmony, node: v8.11.4 2018-10-07 08:37:26.575 - info: harmony.0 searching for Harmony Hubs... 2018-10-07 08:37:27.786 - info: harmony.0 discovered Remote-Hub-Wohnzimmer 2018-10-07 08:37:33.604 - info: harmony.0 connecting to Remote-Hub-Wohnzimmer 2018-10-07 08:37:33.673 - info: zigbee.0 starting. Version 0.7.1 in /opt/iobroker/node_modules/iobroker.zigbee, node: v8.11.4 2018-10-07 08:37:33.697 - info: zigbee.0 Start on port: /dev/serial/by-id/usb-Texas_Instruments_TI_CC2531_USB_CDC___0X00124B0018E1CD67-if00 with panID 6754 channel 11 2018-10-07 08:37:36.178 - info: harmony.0 connected to Remote-Hub-Wohnzimmer 2018-10-07 08:37:37.408 - info: harmony.0 synced hub config 2018-10-07 08:37:38.119 - info: zigbee.0 zigbee-shepherd started! 2018-10-07 08:37:38.137 - info: zigbee.0 zigbee-shepherd ready 2018-10-07 08:37:38.159 - info: zigbee.0 (0x00158d0001e148e6): RTCGQ01LM - Xiaomi MiJia human body movement sensor (EndDevice) 2018-10-07 08:37:40.087 - info: admin.11 received all states 2018-10-07 08:37:45.089 - warn: admin.11 Reconnection to DB. 2018-10-07 08:37:45.111 - warn: admin.11 Reconnection to DB. 2018-10-07 08:40:20.131 - info: host.raspberrypi object change system.adapter.admin.11 2018-10-07 08:40:20.142 - info: admin.11 terminating http server on port 8086 2018-10-07 08:40:20.132 - info: host.raspberrypi object deleted system.adapter.admin.11 2018-10-07 08:40:20.136 - info: host.raspberrypi stopInstance system.adapter.admin.11 2018-10-07 08:40:20.137 - info: host.raspberrypi stopInstance system.adapter.admin.11 killing pid 1786 2018-10-07 08:40:20.155 - info: admin.11 terminating 2018-10-07 08:40:20.298 - error: host.raspberrypi instance system.adapter.admin.11 terminated with code 0 (OK) 2018-10-07 08:40:20.298 - info: host.raspberrypi Do not restart adapter system.adapter.admin.11 because disabled or deleted 2018-10-07 08:40:51.464 - info: host.raspberrypi object change system.adapter.admin.12 2018-10-07 08:42:13.129 - info: host.raspberrypi object change system.adapter.admin.14 2018-10-07 08:42:13.130 - info: host.raspberrypi object deleted system.adapter.admin.14 2018-10-07 08:44:28.192 - info: host.raspberrypi object change system.adapter.admin.13 2018-10-07 08:44:51.340 - info: host.raspberrypi object change system.adapter.admin.10 2018-10-07 08:45:15.730 - info: host.raspberrypi object change system.adapter.admin.0 2018-10-07 08:45:15.774 - info: host.raspberrypi instance system.adapter.admin.0 started with pid 1900 2018-10-07 08:45:20.294 - info: admin.0 starting. Version 3.5.10 in /opt/iobroker/node_modules/iobroker.admin, node: v8.11.4 2018-10-07 08:45:20.348 - info: admin.0 requesting all states 2018-10-07 08:45:20.354 - info: admin.0 requesting all objects 2018-10-07 08:45:20.356 - info: admin.0 Request actual repository... 2018-10-07 08:45:29.887 - info: admin.0 received all states 2018-10-07 08:45:41.050 - info: admin.0 received all objects 2018-10-07 08:45:41.709 - info: admin.0 http server listening on port 8081 2018-10-07 08:45:41.710 - info: admin.0 Use link "http://localhost:8081" to configure. 2018-10-07 08:45:42.109 - info: host.raspberrypi Update repository "default" under "http://download.iobroker.net/sources-dist.json" 2018-10-07 08:45:44.493 - info: email.0 Send email: {"text":"backitup","to":"nachrichtensysteme@gmail.com","subject":"Updates für ioBroker","from":"ioBroker "} 2018-10-07 08:45:46.448 - info: email.0 sent to nachrichtensysteme@gmail.com 2018-10-07 08:45:53.898 - warn: admin.0 Reconnection to DB. 2018-10-07 08:45:53.928 - warn: admin.0 Reconnection to DB. 2018-10-07 08:45:54.298 - error: admin.0 already running 2018-10-07 08:45:54.594 - error: host.raspberrypi instance system.adapter.admin.0 terminated with code 7 (Adapter already running) 2018-10-07 08:45:54.595 - info: host.raspberrypi Restart adapter system.adapter.admin.0 because enabled 2018-10-07 08:46:24.637 - info: host.raspberrypi instance system.adapter.admin.0 started with pid 1933 2018-10-07 08:46:29.398 - info: admin.0 starting. Version 3.5.10 in /opt/iobroker/node_modules/iobroker.admin, node: v8.11.4 2018-10-07 08:46:29.780 - info: admin.0 requesting all states 2018-10-07 08:46:29.786 - info: admin.0 requesting all objects 2018-10-07 08:46:29.789 - info: admin.0 Request actual repository... 2018-10-07 08:46:38.380 - info: admin.0 received all states 2018-10-07 08:46:47.702 - info: admin.0 received all objects 2018-10-07 08:46:48.347 - info: admin.0 http server listening on port 8081 2018-10-07 08:46:48.347 - info: admin.0 Use link "http://localhost:8081" to configure. 2018-10-07 08:46:48.633 - info: host.raspberrypi Update repository "default" under "http://download.iobroker.net/sources-dist.json" 2018-10-07 08:46:52.285 - info: admin.0 Repository received successfully. 2018-10-07 09:05:28.889 - warn: host.raspberrypi some hosts are offline 2018-10-07 09:06:03.847 - warn: email.0 Reconnection to DB. 2018-10-07 09:06:03.852 - warn: email.0 Reconnection to DB. 2018-10-07 09:06:05.523 - error: email.0 already running 2018-10-07 09:06:07.528 - error: host.raspberrypi instance system.adapter.email.0 terminated with code 7 (Adapter already running) 2018-10-07 09:06:07.530 - info: host.raspberrypi Restart adapter system.adapter.email.0 because enabled 2018-10-07 09:06:40.902 - error: uncaught exception: spawn ENOMEM 2018-10-07 09:06:40.938 - info: harmony.0 terminating 2018-10-07 09:06:40.950 - info: admin.0 terminating http server on port 8081 2018-10-07 09:06:41.048 - info: zigbee.0 zigbee-shepherd stopped 2018-10-07 09:06:41.428 - error: admin.0 websocket error 2018-10-07 09:06:41.456 - error: admin.0 Error: websocket error at WS.Transport.onError (/opt/iobroker/node_modules/iobroker.js-controller/node_modules/socket.io-client/node_modules/engine.io-client/lib/transport.js:64:13) at WebSocket.ws.onerror (/opt/iobroker/node_modules/iobroker.js-controller/node_modules/socket.io-client/node_modules/engine.io-client/lib/transports/websocket.js:150:10) at WebSocket.onError (/opt/iobroker/node_modules/iobroker.js-controller/node_modules/socket.io-client/node_modules/engine.io-client/node_modules/ws/lib/EventTarget.js:109:16) at emitOne (events.js:116:13) at WebSocket.emit (events.js:211:7) at WebSocket.finalize (/opt/iobroker/node_modules/iobroker.js-controller/node_modules/socket.io-client/node_modules/engine.io-client/node_modules/ws/lib/WebSocket.js:182:41) at emitOne (events.js:116:13) at Socket.emit (events.js:211:7) at emitErrorNT (internal/streams/destroy.js:64:8) at _combinedTickCallback (internal/process/next_tick.js:138:11) 2018-10-07 09:06:42.454 - info: harmony.0 terminating with timeout 2018-10-07 09:06:42.468 - info: admin.0 terminating with timeout 2018-10-07 09:06:42.468 - info: zigbee.0 terminating with timeout 2018-10-07 09:12:55.103 - info: host.raspberrypi iobroker.js-controller version 1.4.2 js-controller starting 2018-10-07 09:12:55.117 - info: host.raspberrypi Copyright (c) 2014-2018 bluefox, 2014 hobbyquaker 2018-10-07 09:12:55.118 - info: host.raspberrypi hostname: raspberrypi, node: v8.11.4 2018-10-07 09:12:55.131 - info: host.raspberrypi ip addresses: 192.168.168.222 fe80::8bcf:e410:ed6f:584a 2018-10-07 09:12:55.851 - info: host.raspberrypi inMem-states listening on port 9000 2018-10-07 09:12:59.148 - info: host.raspberrypi inMem-objects listening on port 9001 2018-10-07 09:12:59.197 - info: host.raspberrypi InMemoryDB connected 2018-10-07 09:12:59.512 - info: host.raspberrypi 60 instances found 2018-10-07 09:12:59.600 - info: host.raspberrypi starting 4 instances 2018-10-07 09:12:59.735 - info: host.raspberrypi instance system.adapter.admin.0 started with pid 2005 2018-10-07 09:13:09.567 - error: admin.0 no connection to objects DB 2018-10-07 09:13:13.125 - info: host.raspberrypi instance system.adapter.email.0 started with pid 2015 2018-10-07 09:13:16.086 - info: host.raspberrypi instance system.adapter.harmony.0 started with pid 2021 2018-10-07 09:13:16.402 - info: host.raspberrypi instance system.adapter.zigbee.0 started with pid 2028 2018-10-07 09:13:22.100 - info: email.0 starting. Version 1.0.2 in /opt/iobroker/node_modules/iobroker.email, node: v8.11.4 2018-10-07 09:13:25.338 - info: admin.0 starting. Version 3.5.10 in /opt/iobroker/node_modules/iobroker.admin, node: v8.11.4 2018-10-07 09:13:25.805 - info: admin.0 requesting all states 2018-10-07 09:13:25.811 - info: admin.0 requesting all objects 2018-10-07 09:13:25.815 - info: admin.0 Request actual repository... 2018-10-07 09:13:30.357 - info: harmony.0 starting. Version 0.9.3 in /opt/iobroker/node_modules/iobroker.harmony, node: v8.11.4 2018-10-07 09:13:30.466 - info: harmony.0 searching for Harmony Hubs... 2018-10-07 09:13:31.711 - info: harmony.0 discovered Remote-Hub-Wohnzimmer 2018-10-07 09:13:37.433 - info: harmony.0 connecting to Remote-Hub-Wohnzimmer 2018-10-07 09:13:37.075 - info: zigbee.0 starting. Version 0.7.1 in /opt/iobroker/node_modules/iobroker.zigbee, node: v8.11.4 2018-10-07 09:13:37.132 - info: zigbee.0 Start on port: /dev/serial/by-id/usb-Texas_Instruments_TI_CC2531_USB_CDC___0X00124B0018E1CD67-if00 with panID 6754 channel 11 2018-10-07 09:13:38.835 - info: zigbee.0 zigbee-shepherd started! 2018-10-07 09:13:38.852 - info: zigbee.0 zigbee-shepherd ready 2018-10-07 09:13:38.879 - info: zigbee.0 (0x00158d0001e148e6): RTCGQ01LM - Xiaomi MiJia human body movement sensor (EndDevice) 2018-10-07 09:13:39.847 - info: harmony.0 connected to Remote-Hub-Wohnzimmer 2018-10-07 09:13:40.939 - info: harmony.0 synced hub config 2018-10-07 09:13:47.920 - warn: email.0 Reconnection to DB. 2018-10-07 09:13:47.948 - warn: email.0 Reconnection to DB. 2018-10-07 09:13:48.616 - warn: admin.0 Reconnection to DB. 2018-10-07 09:13:48.638 - warn: admin.0 Reconnection to DB. 2018-10-07 09:13:51.083 - info: admin.0 received all states 2018-10-07 09:16:56.598 - info: host.raspberrypi object change system.adapter.admin.0 2018-10-07 09:16:56.609 - info: admin.0 terminating http server on port 8081 2018-10-07 09:16:56.603 - info: host.raspberrypi stopInstance system.adapter.admin.0 2018-10-07 09:16:56.604 - info: host.raspberrypi stopInstance system.adapter.admin.0 killing pid 2005 2018-10-07 09:16:56.625 - info: admin.0 terminating 2018-10-07 09:16:56.759 - info: host.raspberrypi instance system.adapter.admin.0 terminated with code 0 (OK) 2018-10-07 09:16:59.137 - info: host.raspberrypi instance system.adapter.admin.0 started with pid 2059 2018-10-07 09:17:04.151 - info: admin.0 starting. Version 3.5.10 in /opt/iobroker/node_modules/iobroker.admin, node: v8.11.4 2018-10-07 09:17:04.207 - info: admin.0 requesting all states 2018-10-07 09:17:04.213 - info: admin.0 requesting all objects 2018-10-07 09:17:04.216 - info: admin.0 Request actual repository... 2018-10-07 09:17:13.969 - info: admin.0 received all states 2018-10-07 09:17:22.238 - info: admin.0 received all objects 2018-10-07 09:17:22.970 - info: admin.0 http server listening on port 8081 2018-10-07 09:17:22.971 - info: admin.0 Use link "http://localhost:8081" to configure. 2018-10-07 09:17:23.332 - info: host.raspberrypi Update repository "default" under "http://download.iobroker.net/sources-dist.json" 2018-10-07 09:17:28.299 - info: admin.0 Repository received successfully. 2018-10-07 09:38:50.901 - warn: harmony.0 lost Remote-Hub-Wohnzimmer 2018-10-07 09:38:52.942 - info: harmony.0 client ended: Remote-Hub-Wohnzimmer 2018-10-07 09:38:53.005 - info: harmony.0 discovered Remote-Hub-Wohnzimmer 2018-10-07 09:38:54.599 - info: harmony.0 connecting to Remote-Hub-Wohnzimmer 2018-10-07 09:38:55.204 - info: harmony.0 keep alive failed: Error: Timed out after 5000 ms 2018-10-07 09:38:56.929 - info: harmony.0 connected to Remote-Hub-Wohnzimmer 2018-10-07 09:38:57.889 - info: harmony.0 synced hub config 2018-10-07 09:39:26.808 - warn: host.raspberrypi some hosts are offline 2018-10-07 09:40:43.558 - warn: harmony.0 lost Remote-Hub-Wohnzimmer 2018-10-07 09:40:43.569 - info: harmony.0 client ended: Remote-Hub-Wohnzimmer 2018-10-07 09:40:43.576 - info: harmony.0 discovered Remote-Hub-Wohnzimmer 2018-10-07 09:40:48.245 - info: harmony.0 connecting to Remote-Hub-Wohnzimmer 2018-10-07 09:40:51.182 - info: harmony.0 connected to Remote-Hub-Wohnzimmer 2018-10-07 09:40:52.788 - info: harmony.0 synced hub config 2018-10-07 09:41:12.318 - warn: admin.0 Reconnection to DB. 2018-10-07 09:41:12.324 - warn: admin.0 Reconnection to DB. 2018-10-07 09:41:12.373 - error: admin.0 already running 2018-10-07 09:41:12.711 - error: host.raspberrypi instance system.adapter.admin.0 terminated with code 7 (Adapter already running) 2018-10-07 09:41:12.712 - info: host.raspberrypi Restart adapter system.adapter.admin.0 because enabled 2018-10-07 09:41:42.744 - error: uncaught exception: spawn ENOMEM 2018-10-07 09:41:42.864 - info: harmony.0 terminating 2018-10-07 09:41:43.125 - info: zigbee.0 zigbee-shepherd stopped 2018-10-07 09:41:43.280 - error: harmony.0 websocket error 2018-10-07 09:41:43.389 - error: zigbee.0 websocket error 2018-10-07 09:41:43.330 - error: harmony.0 Error: websocket error at WS.Transport.onError (/opt/iobroker/node_modules/iobroker.js-controller/node_modules/socket.io-client/node_modules/engine.io-client/lib/transport.js:64:13) at WebSocket.ws.onerror (/opt/iobroker/node_modules/iobroker.js-controller/node_modules/socket.io-client/node_modules/engine.io-client/lib/transports/websocket.js:150:10) at WebSocket.onError (/opt/iobroker/node_modules/iobroker.js-controller/node_modules/socket.io-client/node_modules/engine.io-client/node_modules/ws/lib/EventTarget.js:109:16) at emitOne (events.js:116:13) at WebSocket.emit (events.js:211:7) at WebSocket.finalize (/opt/iobroker/node_modules/iobroker.js-controller/node_modules/socket.io-client/node_modules/engine.io-client/node_modules/ws/lib/WebSocket.js:182:41) at emitOne (events.js:116:13) at Socket.emit (events.js:211:7) at emitErrorNT (internal/streams/destroy.js:64:8) at _combinedTickCallback (internal/process/next_tick.js:138:11) 2018-10-07 09:41:43.405 - error: zigbee.0 Error: websocket error at WS.Transport.onError (/opt/iobroker/node_modules/iobroker.js-controller/node_modules/socket.io-client/node_modules/engine.io-client/lib/transport.js:64:13) at WebSocket.ws.onerror (/opt/iobroker/node_modules/iobroker.js-controller/node_modules/socket.io-client/node_modules/engine.io-client/lib/transports/websocket.js:150:10) at WebSocket.onError (/opt/iobroker/node_modules/iobroker.js-controller/node_modules/socket.io-client/node_modules/engine.io-client/node_modules/ws/lib/EventTarget.js:109:16) at emitOne (events.js:116:13) at WebSocket.emit (events.js:211:7) at WebSocket.finalize (/opt/iobroker/node_modules/iobroker.js-controller/node_modules/socket.io-client/node_modules/engine.io-client/node_modules/ws/lib/WebSocket.js:182:41) at emitOne (events.js:116:13) at Socket.emit (events.js:211:7) at emitErrorNT (internal/streams/destroy.js:64:8) at _combinedTickCallback (internal/process/next_tick.js:138:11) 2018-10-07 09:41:44.407 - info: harmony.0 terminating with timeout 2018-10-07 09:41:44.439 - info: zigbee.0 terminating with timeout 2018-10-07 09:41:44.438 - info: email.0 terminating with timeout 2018-10-07 09:44:05.726 - info: host.raspberrypi iobroker.js-controller version 1.4.2 js-controller starting 2018-10-07 09:44:05.750 - info: host.raspberrypi Copyright (c) 2014-2018 bluefox, 2014 hobbyquaker 2018-10-07 09:44:05.751 - info: host.raspberrypi hostname: raspberrypi, node: v8.11.4 2018-10-07 09:44:05.761 - info: host.raspberrypi ip addresses: 192.168.168.222 fe80::8bcf:e410:ed6f:584a 2018-10-07 09:44:06.672 - info: host.raspberrypi inMem-states listening on port 9000 2018-10-07 09:44:09.983 - info: host.raspberrypi inMem-objects listening on port 9001 2018-10-07 09:44:10.026 - info: host.raspberrypi InMemoryDB connected 2018-10-07 09:44:10.346 - info: host.raspberrypi 60 instances found 2018-10-07 09:44:10.425 - info: host.raspberrypi starting 4 instances 2018-10-07 09:44:10.558 - info: host.raspberrypi instance system.adapter.admin.0 started with pid 2132 2018-10-07 09:44:15.021 - info: host.raspberrypi instance system.adapter.email.0 started with pid 2138 2018-10-07 09:44:19.961 - info: host.raspberrypi instance system.adapter.harmony.0 started with pid 2144 2018-10-07 09:44:22.175 - info: email.0 starting. Version 1.0.2 in /opt/iobroker/node_modules/iobroker.email, node: v8.11.4 2018-10-07 09:44:22.591 - info: host.raspberrypi instance system.adapter.zigbee.0 started with pid 2158 2018-10-07 09:44:22.758 - info: admin.0 starting. Version 3.5.10 in /opt/iobroker/node_modules/iobroker.admin, node: v8.11.4 2018-10-07 09:44:23.155 - info: admin.0 requesting all states 2018-10-07 09:44:23.173 - info: admin.0 requesting all objects 2018-10-07 09:44:23.177 - info: admin.0 Request actual repository... 2018-10-07 09:44:29.875 - error: harmony.0 no connection to objects DB 2018-10-07 09:44:30.523 - info: harmony.0 starting. Version 0.9.3 in /opt/iobroker/node_modules/iobroker.harmony, node: v8.11.4 2018-10-07 09:44:30.577 - info: harmony.0 searching for Harmony Hubs... 2018-10-07 09:44:31.843 - info: harmony.0 discovered Remote-Hub-Wohnzimmer 2018-10-07 09:44:30.542 - info: zigbee.0 starting. Version 0.7.1 in /opt/iobroker/node_modules/iobroker.zigbee, node: v8.11.4 2018-10-07 09:44:30.577 - info: zigbee.0 Start on port: /dev/serial/by-id/usb-Texas_Instruments_TI_CC2531_USB_CDC___0X00124B0018E1CD67-if00 with panID 6754 channel 11 2018-10-07 09:44:33.564 - info: harmony.0 connecting to Remote-Hub-Wohnzimmer 2018-10-07 09:44:34.199 - info: zigbee.0 zigbee-shepherd started! 2018-10-07 09:44:34.212 - info: zigbee.0 zigbee-shepherd ready 2018-10-07 09:44:34.231 - info: zigbee.0 (0x00158d0001e148e6): RTCGQ01LM - Xiaomi MiJia human body movement sensor (EndDevice) 2018-10-07 09:44:36.130 - info: harmony.0 connected to Remote-Hub-Wohnzimmer 2018-10-07 09:44:37.310 - info: admin.0 received all states 2018-10-07 09:44:37.318 - info: harmony.0 synced hub config 2018-10-07 09:44:53.037 - warn: admin.0 Reconnection to DB. 2018-10-07 09:44:53.047 - warn: email.0 Reconnection to DB. 2018-10-07 09:44:53.055 - warn: email.0 Reconnection to DB. 2018-10-07 09:44:53.066 - warn: admin.0 Reconnection to DB. 2018-10-07 09:54:35.610 - warn: admin.0 Reconnection to DB. 2018-10-07 09:54:35.620 - warn: admin.0 Reconnection to DB. 2018-10-07 09:54:35.629 - warn: email.0 Reconnection to DB. 2018-10-07 09:54:35.635 - warn: email.0 Reconnection to DB. 2018-10-07 10:28:28.390 - info: host.raspberrypi object change system.adapter.admin.0 2018-10-07 10:28:28.401 - info: admin.0 terminating http server on port 8081 2018-10-07 10:28:28.395 - info: host.raspberrypi stopInstance system.adapter.admin.0 2018-10-07 10:28:28.395 - info: host.raspberrypi stopInstance system.adapter.admin.0 killing pid 2132 2018-10-07 10:28:28.415 - info: admin.0 terminating 2018-10-07 10:28:28.555 - info: host.raspberrypi instance system.adapter.admin.0 terminated with code 0 (OK) 2018-10-07 10:28:30.936 - info: host.raspberrypi instance system.adapter.admin.0 started with pid 2241 2018-10-07 10:28:37.560 - info: admin.0 starting. Version 3.5.10 in /opt/iobroker/node_modules/iobroker.admin, node: v8.11.4 2018-10-07 10:28:38.080 - info: admin.0 requesting all states 2018-10-07 10:28:38.087 - info: admin.0 requesting all objects 2018-10-07 10:28:38.090 - info: admin.0 Request actual repository... 2018-10-07 10:28:47.997 - info: admin.0 received all states 2018-10-07 10:29:00.293 - info: admin.0 received all objects 2018-10-07 10:29:02.219 - info: admin.0 http server listening on port 8081 2018-10-07 10:29:02.219 - info: admin.0 Use link "http://localhost:8081" to configure. 2018-10-07 10:29:02.844 - info: host.raspberrypi Update repository "default" under "http://download.iobroker.net/sources-dist.json" 2018-10-07 10:29:12.158 - info: admin.0 Repository received successfully. 2018-10-07 10:44:05.726 - info: host.raspberrypi Delete log file iobroker.2018-09-30.log 2018-10-07 10:50:34.720 - warn: zigbee.0 Reconnection to DB. 2018-10-07 10:50:34.747 - error: email.0 already running 2018-10-07 10:50:34.738 - warn: zigbee.0 Reconnection to DB. 2018-10-07 10:50:34.985 - error: harmony.0 already running 2018-10-07 10:50:35.149 - error: host.raspberrypi instance system.adapter.email.0 terminated with code 7 (Adapter already running) 2018-10-07 10:50:35.150 - info: host.raspberrypi Restart adapter system.adapter.email.0 because enabled 2018-10-07 10:50:35.205 - error: host.raspberrypi instance system.adapter.harmony.0 terminated with code 7 (Adapter already running) 2018-10-07 10:50:35.206 - info: host.raspberrypi Restart adapter system.adapter.harmony.0 because enabled 2018-10-07 10:50:35.427 - error: zigbee.0 already running 2018-10-07 10:50:35.581 - error: host.raspberrypi instance system.adapter.zigbee.0 terminated with code 7 (Adapter already running) 2018-10-07 10:50:35.582 - info: host.raspberrypi Restart adapter system.adapter.zigbee.0 because enabled 2018-10-07 10:51:05.981 - error: uncaught exception: spawn ENOMEM 2018-10-07 10:51:06.010 - info: admin.0 terminating http server on port 8081 2018-10-07 10:51:06.398 - error: admin.0 websocket error 2018-10-07 10:51:06.422 - error: admin.0 Error: websocket error at WS.Transport.onError (/opt/iobroker/node_modules/iobroker.js-controller/node_modules/socket.io-client/node_modules/engine.io-client/lib/transport.js:64:13) at WebSocket.ws.onerror (/opt/iobroker/node_modules/iobroker.js-controller/node_modules/socket.io-client/node_modules/engine.io-client/lib/transports/websocket.js:150:10) at WebSocket.onError (/opt/iobroker/node_modules/iobroker.js-controller/node_modules/socket.io-client/node_modules/engine.io-client/node_modules/ws/lib/EventTarget.js:109:16) at emitOne (events.js:116:13) at WebSocket.emit (events.js:211:7) at WebSocket.finalize (/opt/iobroker/node_modules/iobroker.js-controller/node_modules/socket.io-client/node_modules/engine.io-client/node_modules/ws/lib/WebSocket.js:182:41) at emitOne (events.js:116:13) at Socket.emit (events.js:211:7) at emitErrorNT (internal/streams/destroy.js:64:8) at _combinedTickCallback (internal/process/next_tick.js:138:11) 2018-10-07 10:51:07.523 - info: admin.0 terminating with timeout 2018-10-07 11:03:55.125 - info: host.raspberrypi iobroker.js-controller version 1.4.2 js-controller starting 2018-10-07 11:03:55.149 - info: host.raspberrypi Copyright (c) 2014-2018 bluefox, 2014 hobbyquaker 2018-10-07 11:03:55.150 - info: host.raspberrypi hostname: raspberrypi, node: v8.11.4 2018-10-07 11:03:55.158 - info: host.raspberrypi ip addresses: 192.168.168.222 fe80::8bcf:e410:ed6f:584a 2018-10-07 11:03:56.070 - info: host.raspberrypi inMem-states listening on port 9000 2018-10-07 11:03:59.342 - info: host.raspberrypi inMem-objects listening on port 9001 2018-10-07 11:03:59.397 - info: host.raspberrypi InMemoryDB connected 2018-10-07 11:03:59.717 - info: host.raspberrypi 60 instances found 2018-10-07 11:03:59.805 - info: host.raspberrypi starting 4 instances 2018-10-07 11:04:00.059 - info: host.raspberrypi instance system.adapter.admin.0 started with pid 2305 2018-10-07 11:04:05.985 - info: host.raspberrypi instance system.adapter.email.0 started with pid 2311 2018-10-07 11:04:09.604 - info: host.raspberrypi instance system.adapter.harmony.0 started with pid 2317 2018-10-07 11:04:10.629 - error: admin.0 no connection to objects DB 2018-10-07 11:04:12.675 - info: host.raspberrypi instance system.adapter.zigbee.0 started with pid 2328 2018-10-07 11:04:18.327 - error: email.0 no connection to states DB: Connection timeout 2018-10-07 11:04:21.333 - error: harmony.0 no connection to objects DB 2018-10-07 11:04:22.095 - info: email.0 starting. Version 1.0.2 in /opt/iobroker/node_modules/iobroker.email, node: v8.11.4 2018-10-07 11:04:22.125 - info: admin.0 starting. Version 3.5.10 in /opt/iobroker/node_modules/iobroker.admin, node: v8.11.4 2018-10-07 11:04:22.933 - info: admin.0 requesting all states 2018-10-07 11:04:22.939 - info: admin.0 requesting all objects 2018-10-07 11:04:22.953 - info: admin.0 Request actual repository... 2018-10-07 11:04:28.537 - info: harmony.0 starting. Version 0.9.3 in /opt/iobroker/node_modules/iobroker.harmony, node: v8.11.4 2018-10-07 11:04:28.594 - info: harmony.0 searching for Harmony Hubs... 2018-10-07 11:04:29.818 - info: harmony.0 discovered Remote-Hub-Wohnzimmer 2018-10-07 11:04:29.096 - info: zigbee.0 starting. Version 0.7.1 in /opt/iobroker/node_modules/iobroker.zigbee, node: v8.11.4 2018-10-07 11:04:29.121 - info: zigbee.0 Start on port: /dev/serial/by-id/usb-Texas_Instruments_TI_CC2531_USB_CDC___0X00124B0018E1CD67-if00 with panID 6754 channel 11 2018-10-07 11:04:32.035 - info: harmony.0 connecting to Remote-Hub-Wohnzimmer 2018-10-07 11:04:32.257 - info: zigbee.0 zigbee-shepherd started! 2018-10-07 11:04:32.272 - info: zigbee.0 zigbee-shepherd ready 2018-10-07 11:04:32.296 - info: zigbee.0 (0x00158d0001e148e6): RTCGQ01LM - Xiaomi MiJia human body movement sensor (EndDevice) 2018-10-07 11:04:34.551 - info: harmony.0 connected to Remote-Hub-Wohnzimmer 2018-10-07 11:04:35.396 - info: admin.0 received all states 2018-10-07 11:04:35.638 - info: harmony.0 synced hub config 2018-10-07 11:04:43.381 - warn: admin.0 Reconnection to DB. 2018-10-07 11:04:43.399 - warn: admin.0 Reconnection to DB. 2018-10-07 11:05:28.979 - info: host.raspberrypi object change system.adapter.admin.0 2018-10-07 11:05:28.990 - info: admin.0 terminating http server on port 8081 2018-10-07 11:05:28.984 - info: host.raspberrypi stopInstance system.adapter.admin.0 2018-10-07 11:05:28.985 - info: host.raspberrypi stopInstance system.adapter.admin.0 killing pid 2305 2018-10-07 11:05:29.035 - info: admin.0 terminating 2018-10-07 11:05:29.185 - info: host.raspberrypi instance system.adapter.admin.0 terminated with code 0 (OK) 2018-10-07 11:05:31.532 - info: host.raspberrypi instance system.adapter.admin.0 started with pid 2355 2018-10-07 11:05:39.555 - info: admin.0 starting. Version 3.5.10 in /opt/iobroker/node_modules/iobroker.admin, node: v8.11.4 2018-10-07 11:05:40.069 - info: admin.0 requesting all states 2018-10-07 11:05:40.076 - info: admin.0 requesting all objects 2018-10-07 11:05:40.080 - info: admin.0 Request actual repository... 2018-10-07 11:05:54.014 - info: admin.0 received all states 2018-10-07 11:06:04.289 - info: admin.0 received all objects 2018-10-07 11:06:05.267 - info: admin.0 http server listening on port 8081 2018-10-07 11:06:05.268 - info: admin.0 Use link "http://localhost:8081" to configure. 2018-10-07 11:06:05.633 - info: host.raspberrypi Update repository "default" under "http://download.iobroker.net/sources-dist.json" 2018-10-07 11:06:21.207 - info: admin.0 Repository received successfully. 2018-10-07 11:09:16.050 - warn: host.raspberrypi some hosts are offline 2018-10-07 11:09:21.798 - warn: host.raspberrypi too delayed answer for ioBroker-Pi3-slave-sw -
2. Ja habe alles und in jeder Art und Weise neu gestartet `
Das kann eigentlich nicht sein.Der NAS-Host meldet eine Uptime von fast 4 Tagen:
~~<link_text text="https://uploads.tapatalk-cdn.com/201810 ... 35479a.jpg">https://uploads.tapatalk-cdn.com/20181007/adb1b61012598d748e25959dfb35479a.jpg</link_text>" />Reboote den erst mal und installiere ein anderes npm.
Bzw. schau mal auf der Konsole, welche npm-Version installiert ist.
Gruß,
Eric
Von unterwegs getippert~~
-
sorry war kein aktuelles Bild
950_iobroker4.jpg
950_iobroker5.jpg -
sorry war kein aktuelles Bild `
Danke für das in die Irre leiten.Jetzt die npm-Version anpassen.
Gruß,
Eric
Von unterwegs getippert
-
das funktioniert leider nicht beim NAS
sudo apt-get –purge remove node
sudo apt-get --purge remove nodejs
sudo apt-get autoremove
curl -sL https://deb.nodesource.com/setup_8.x | sudo -E bash -
sudo apt-get install -y nodejs
node -v
sudo npm install -g npm@4
npm -v
950_iobroker6.jpg -
sudo npm install -g npm@4.6.1
hat funktioniert
Zeigt aber 5 noch an
-
Siehe hier
950_iobroker7.jpg -
Dann hilft ggf ein "which npm" um zu sehen wo er es installiert hat … scheinbar hast Du es jetzt doppelt drauf.
Mit "npm root -g" bekommst Du eine Info zum Basisverzeichnis wo npm sich selbst global installiert hat (und globale Module)
Da musst Du jetzt malschauen
-
Hallo und danke für Deine Hilfe!!!
Und was jetzt ???
<u>Master:</u>
root@raspberrypi:~# npm root -g
/usr/lib/node_modules
<u>Slave Raspi:</u>
pi@ioBroker-Pi3-slave:~ $ npm root -g
/usr/lib/node_modules
<u>Slave NAS:</u>
admin@nasserver:~$ npm root -g
/volume1/@appstore/Node.js_v6/usr/local/lib/node_modules
-
und was sagt which npm
auf dem NAS Slave (nur der Macht probleme korrekt?)
-
Alles macht leider Probleme.
Meine Vermutung ist nur das es an npm 5x liegt(NAS). Habe ich so irgendwo gelesen
Ich muss sehr oft den Master neu starten (iobroker start und admin.0 restart)
Bin leider auch kein Profi
Master Raspi:
root@raspberrypi:/opt/iobroker# which npm
/usr/bin/npm
Slave Raspi:
pi@ioBroker-Pi3-slave:~ $ which npm
/usr/bin/npm
NAS:
admin@nasserver:~$ which npm
/usr/local/bin/npm
-
Also mal eins nach dem anderen!!
Du hast scheinbar mehrere Probleme in deinem Setup die im ersten Schritt mal unabhängig sind, wenn ich das so richtig lese.
Ich sehe mindestens 2:
1.) Auf deinem pi hast du öfter meldungen über doppelt laufende Prozesse
2.) Auf deinem nas kannst du npm nicht updaten (und ja 5.6.0 ist böse, sollte aber dann nur den Slave betreffen und dem Master erstmal egal sein!)
Die Probleme mit Admin und so könnten von ersterem herrühren.
Sonst noch mehr?
zu 1.) Zu diesem Thema findest Du mehrere Threads hier im Forum.
Ohne weitere Infos (wieveiele Adapter laufen da in Summe und auch dem Pi? Redis oder nicht? CPU/Speicher-Auslastung?…) ist hier alles Glaskugel. Solche Probleme sind meistens irgendwie wegen Ressourcenlimits (i/o, CPU, RAM) verursacht und am Ende ist ein Logauszug von "wenn es schon passiert ist" zu spät. Du musst finden was das log sagt wenn diese Themen anfangen!
Auch ein Check in /var/log/syslog ist ggf interessant falls da das wort killer (genau genommen OOM killer) vorkommt, dann ist Dir nämlich der RAM ausgegangen!
Was Du hier tun kannst ist dich annähern. Schalte auf dem pi alle Adapterinstanzen aus auser Admin und reboote. Dann hast Du einen cleanen stand. jetzt nach und nach die Instanzen einschalten. Dabei "top" (und damit CPU und RAM und so im Auge behalten) und ioBroker Logfile auf der Platte (/opt/iobroker/log/...) anschauen. Dann siehst Du ggf was passiert wenn deine probleme starten und du kannst von da aus weiter probieren und ggf auch hier die relevanten Teile posten.
zu 2.) Scheinbar hat deine NAS den Pfad von originalen NPM version im pfad und so wird die neue nicht geladen. Jetzt musst Du für deine NAS schauen ob Du den Pfad (PATH) dauerhaft anpassen kannst oder ob Du die /usr/local/bin/npm in einen symbolischen Link verwandelst der auf die andere globale Installations-Lokation zeigt. Dann sollte die npm version von dort genutzt werden.
Ingo
-
Erst einmal vielen dank für die ausführliche Hilfe!!!!!
Den RAM habe ich eigentlich immer im Auge (selten unter 30%)
wie sieht es aus wenn ich das iobroker Verzeichnis in iobrokerOLD umbenenne und nach einer Neuinstallierung alles zurück kopiere? Kopiere ich den Fehler auch mit? oder ist das ein Versuch wert ? (Ja ist klar Glaskugel und so
)Zu 2.
Sorry aber ich komm da nicht mit
-
Den RAM habe ich eigentlich immer im Auge (selten unter 30%)
wie sieht es aus wenn ich das iobroker Verzeichnis in iobrokerOLD umbenenne und nach einer Neuinstallierung alles zurück kopiere? Kopiere ich den Fehler auch mit? oder ist das ein Versuch wert ? (Ja ist klar Glaskugel und so
) `Welchen "Fehler" meinst Du denn? Für mich ist nicht klar das ein Fehler überhaupt da ist.
Wenn schon dann backup machen und das zurückspielen nach einer Neuinstallation, aber wenn die Adapter an sich starten und alles läuft bis plötzlich diese Probleme anfangen dann ist das nichts was eine neuinstallation fixen sollte denke ich.
