SOLVED Zigbee adapter nach upgrade gelb
-
Hallo zusammen,
ich schließe mich hier einfach mal mit meinem Problem an, da es sich bei mir ziemlich ähnlich verhält.
Allerdings konnte ich mein Problem leider nicht lösen.Ich nutze den Zigbee Adapter in Version 1.0.2.
Von heute auf morgen habe ich das Problem, dass alle angelernten Geräte verschwunden sind und nichts mehr funktioniert. Die Zigbee-Instanz hat einen gelben Punkt und begrüßt mich beim öffnen ebenfalls mit der Meldung "You need save and run adapter before pairing!" Selbst wenn ich den COM-Anschluss neu auswähle (/dev/ttyACM0) oder wie es früher bei mir war, eingebe, (/dev/serial/by-id/usb-Texas_Instruments_TI_CC2531_USB_CDC___0X00124B000BE5ADB1-if00) funktioniert nichts.Ich habe an meinen Einstellungen auch nichts geändert. Mein CC2531 Stick wird auch weiterhin erkannt und wie im letzten Post von @godlich2019 im Terminal angezeigt.
Die Zigbee-Instanz sagt mir auch "Verbunden mit Host: wahr", "Lebenszeichen: wahr".Vielleicht kann mir jemand weiterhelfen. Vielen Dank schonmal vorab
Infos zum System:
Raspberry Pi 4 (4GB)
Node.js v10.19.0
NPM 6.13.4zigbee.0 2020-02-11 22:12:15.515 error at binding.open.then.err (/opt/iobroker/node_modules/@serialport/stream/lib/index.js:242:12) zigbee.0 2020-02-11 22:12:15.515 error at SerialPort._error (/opt/iobroker/node_modules/@serialport/stream/lib/index.js:198:14) zigbee.0 2020-02-11 22:12:15.515 error at SerialPort.serialPort.open (/opt/iobroker/node_modules/zigbee-herdsman/dist/adapter/z-stack/znp/znp.js:111:49) zigbee.0 2020-02-11 22:12:15.515 error at __awaiter (/opt/iobroker/node_modules/zigbee-herdsman/dist/adapter/z-stack/znp/znp.js:4:12) zigbee.0 2020-02-11 22:12:15.515 error at new Promise (<anonymous>) zigbee.0 2020-02-11 22:12:15.515 error at /opt/iobroker/node_modules/zigbee-herdsman/dist/adapter/z-stack/znp/znp.js:8:71 zigbee.0 2020-02-11 22:12:15.515 error at Generator.next (<anonymous>) zigbee.0 2020-02-11 22:12:15.515 error at Znp.<anonymous> (/opt/iobroker/node_modules/zigbee-herdsman/dist/adapter/z-stack/znp/znp.js:113:32) zigbee.0 2020-02-11 22:12:15.515 error (15910) Error: Error while opening serialport 'Error: Error Resource temporarily unavailable Cannot lock port' zigbee.0 2020-02-11 22:12:15.514 error (15910) Failed to start Zigbee zigbee.0 2020-02-11 22:12:15.314 info (15910) Starting Zigbee... zigbee.0 2020-02-11 22:12:15.313 info (15910) Try to reconnect. 1 attempts left zigbee.0 2020-02-11 22:12:05.311 error at Timer.processTimers (timers.js:223:10) zigbee.0 2020-02-11 22:12:05.311 error at listOnTimeout (timers.js:263:5) zigbee.0 2020-02-11 22:12:05.311 error at tryOnTimeout (timers.js:300:5) zigbee.0 2020-02-11 22:12:05.311 error at ontimeout (timers.js:436:11) zigbee.0 2020-02-11 22:12:05.311 error at Timeout.object.timer.setTimeout [as _onTimeout] (/opt/iobroker/node_modules/zigbee-herdsman/dist/utils/waitress.js:44:24) zigbee.0 2020-02-11 22:12:05.311 error (15910) Error: AREQ - ZDO - stateChangeInd after 60000ms zigbee.0 2020-02-11 22:12:05.310 error (15910) Failed to start Zigbee zigbee.0 2020-02-11 22:11:03.897 info (15910) Starting Zigbee... zigbee.0 2020-02-11 22:11:03.840 info (15910) starting. Version 1.0.2 in /opt/iobroker/node_modules/iobroker.zigbee, node: v10.19.0 host.raspberrypi 2020-02-11 22:11:01.493 info instance system.adapter.zigbee.0 started with pid 15910 host.raspberrypi 2020-02-11 22:10:59.534 info instance system.adapter.zigbee.0 terminated with code 156 (156) host.raspberrypi 2020-02-11 22:10:59.534 error Caught by controller[0]: (node:14785) [DEP0018] DeprecationWarning: Unhandled promise rejections are deprecated. In the future, promise rejections that are not handled will terminate the Node.js proc host.raspberrypi 2020-02-11 22:10:59.533 error Caught by controller[0]: (node:14785) UnhandledPromiseRejectionWarning: Unhandled promise rejection. This error originated either by throwing inside of an async function without a catch block, or by host.raspberrypi 2020-02-11 22:10:59.533 error Caught by controller[0]: at stop (/opt/iobroker/node_modules/iobroker.js-controller/lib/adapter.js:7223:22) host.raspberrypi 2020-02-11 22:10:59.533 error Caught by controller[0]: at Zigbee.emit (events.js:198:13) host.raspberrypi 2020-02-11 22:10:59.533 error Caught by controller[0]: at Zigbee.onUnload (/opt/iobroker/node_modules/iobroker.zigbee/main.js:312:41) host.raspberrypi 2020-02-11 22:10:59.532 error Caught by controller[0]: at ZigbeeController.stop (/opt/iobroker/node_modules/iobroker.zigbee/lib/zigbeecontroller.js:289:20) host.raspberrypi 2020-02-11 22:10:59.532 error Caught by controller[0]: at ZigbeeController.callExtensionMethod (/opt/iobroker/node_modules/iobroker.zigbee/lib/zigbeecontroller.js:177:42) host.raspberrypi 2020-02-11 22:10:59.532 error Caught by controller[0]: at DeviceAvailability.stop (/opt/iobroker/node_modules/iobroker.zigbee/lib/zbDeviceAvailability.js:123:43) host.raspberrypi 2020-02-11 22:10:59.531 error Caught by controller[0]: at ZigbeeController.getClients (/opt/iobroker/node_modules/iobroker.zigbee/lib/zigbeecontroller.js:191:49) host.raspberrypi 2020-02-11 22:10:59.531 error Caught by controller[0]: at Controller.getDevices (/opt/iobroker/node_modules/zigbee-herdsman/dist/controller/controller.js:218:31) host.raspberrypi 2020-02-11 22:10:59.531 error Caught by controller[0]: at Function.all (/opt/iobroker/node_modules/zigbee-herdsman/dist/controller/model/device.js:155:16) host.raspberrypi 2020-02-11 22:10:59.530 error Caught by controller[0]: at Function.loadFromDatabaseIfNecessary (/opt/iobroker/node_modules/zigbee-herdsman/dist/controller/model/device.js:135:55) host.raspberrypi 2020-02-11 22:10:59.530 error Caught by controller[0]: (node:14785) UnhandledPromiseRejectionWarning: TypeError: Cannot read property 'getEntries' of null zigbee.0 2020-02-11 22:10:58.996 info (14785) Terminated (START_IMMEDIATELY_AFTER_STOP): Without reason zigbee.0 2020-02-11 22:10:58.995 info (14785) terminating zigbee.0 2020-02-11 22:10:58.994 error at process._tickCallback (internal/process/next_tick.js:68:7)) zigbee.0 2020-02-11 22:10:58.994 error at ZigbeeController.stop (/opt/iobroker/node_modules/iobroker.zigbee/lib/zigbeecontroller.js:293:33) zigbee.0 2020-02-11 22:10:58.994 error at Controller.stop (/opt/iobroker/node_modules/zigbee-herdsman/dist/controller/controller.js:169:16) zigbee.0 2020-02-11 22:10:58.994 error at __awaiter (/opt/iobroker/node_modules/zigbee-herdsman/dist/controller/controller.js:4:12) zigbee.0 2020-02-11 22:10:58.994 error at new Promise (<anonymous>) zigbee.0 2020-02-11 22:10:58.994 error at /opt/iobroker/node_modules/zigbee-herdsman/dist/controller/controller.js:8:71 zigbee.0 2020-02-11 22:10:58.994 error at Generator.next (<anonymous>) zigbee.0 2020-02-11 22:10:58.994 error at Controller.<anonymous> (/opt/iobroker/node_modules/zigbee-herdsman/dist/controller/controller.js:173:49) zigbee.0 2020-02-11 22:10:58.994 error at Function.all (/opt/iobroker/node_modules/zigbee-herdsman/dist/controller/model/group.js:76:15) zigbee.0 2020-02-11 22:10:58.994 error at Function.loadFromDatabaseIfNecessary (/opt/iobroker/node_modules/zigbee-herdsman/dist/controller/model/group.js:64:55) zigbee.0 2020-02-11 22:10:58.994 error (14785) Failed to stop zigbee (TypeError: Cannot read property 'getEntries' of null zigbee.0 2020-02-11 22:10:58.990 info (14785) Zigbee: disabling joining new devices. zigbee.0 2020-02-11 22:10:58.985 info (14785) cleaned everything up... zigbee.0 2020-02-11 22:10:58.983 info (14785) Got terminate signal TERMINATE_YOURSELFEDIT:
Wenn ich den Adapter jetzt neu installiere bekomme ich folgende Fehler während der Installation angezeigt:
$ ./iobroker add zigbee --host raspberrypi NPM version: 6.13.4 npm install iobroker.zigbee@1.0.2 --loglevel error --prefix "/opt/iobroker" (System call) In file included from ../src/DeviceINQ.h:17, from ../src/linux/BluetoothSerialPort.cc:13:../node_modules/nan/nan.h: In function ‘void Nan::AsyncQueueWorker(Nan::AsyncWorker*)’:../node_modules/nan/nan.h:2298:62: warning: cast between incompatible function types from ‘void (*)(uv_work_t*)’ {aka ‘void (*)(uv_work_s*)’} to ‘uv_after_work_cb’ {aka ‘void (*)(uv_work_s*, int)’} [-Wcast-function-type] , reinterpret_cast<uv_after_work_cb>(AsyncExecuteComplete) ^ In file included from ../src/linux/BluetoothSerialPort.cc:12:../src/linux/BluetoothSerialPort.cc: At global scope:/home/iobroker/.cache/node-gyp/10.19.0/include/node/node.h:573:43: warning: cast between incompatible function types from ‘void (*)(v8::Handle<v8::Object>)’ {aka ‘void (*)(v8::Local<v8::Object>)’} to ‘node::addon_register_func’ {aka ‘void (*)(v8::Local<v8::Object>, v8::Local<v8::Value>, void*)’} [-Wcast-function-type] (node::addon_register_func) (regfunc), \ ^/home/iobroker/.cache/node-gyp/10.19.0/include/node/node.h:607:3: note: in expansion of macro ‘NODE_MODULE_X’ NODE_MODULE_X(modname, regfunc, NULL, 0) // NOLINT (readability/null_usage) ^~~~~~~~~~~~~../src/linux/BluetoothSerialPort.cc:23:1: note: in expansion of macro ‘NODE_MODULE’ NODE_MODULE(BluetoothSerialPort, InitAll) ^~~~~~~~~~~ In file included from /home/iobroker/.cache/node-gyp/10.19.0/include/node/node.h:63, from ../src/linux/BluetoothSerialPort.cc:12:/home/iobroker/.cache/node-gyp/10.19.0/include/node/v8.h: In instantiation of ‘void v8::PersistentBase<T>::SetWeak(P*, typename v8::WeakCallbackInfo<P>::Callback, v8::WeakCallbackType) [with P = node::ObjectWrap; T = v8::Object; typename v8::WeakCallbackInfo<P>::Callback = void (*)(const v8::WeakCallbackInfo<node::ObjectWrap>&)]’:/home/iobroker/.cache/node-gyp/10.19.0/include/node/node_object_wrap.h:84:78: required from here/home/iobroker/.cache/node-gyp/10.19.0/include/node/v8.h:9502:16: warning: cast between incompatible function types from ‘v8::WeakCallbackInfo<node::ObjectWrap>::Callback’ {aka ‘void (*)(const v8::WeakCallbackInfo<node::ObjectWrap>&)’} to ‘Callback’ {aka ‘void (*)(const v8::WeakCallbackInfo<void>&)’} [-Wcast-function-type] reinterpret_cast<Callback>(callback), type); ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ /home/iobroker/.cache/node-gyp/10.19.0/include/node/v8.h: In instantiation of ‘void v8::PersistentBase<T>::SetWeak(P*, typename v8::WeakCallbackInfo<P>::Callback, v8::WeakCallbackType) [with P = Nan::ObjectWrap; T = v8::Object; typename v8::WeakCallbackInfo<P>::Callback = void (*)(const v8::WeakCallbackInfo<Nan::ObjectWrap>&)]’:../node_modules/nan/nan_object_wrap.h:65:61: required from here/home/iobroker/.cache/node-gyp/10.19.0/include/node/v8.h:9502:16: warning: cast between incompatible function types from ‘v8::WeakCallbackInfo<Nan::ObjectWrap>::Callback’ {aka ‘void (*)(const v8::WeakCallbackInfo<Nan::ObjectWrap>&)’} to ‘Callback’ {aka ‘void (*)(const v8::WeakCallbackInfo<void>&)’} [-Wcast-function-type] ../src/linux/DeviceINQ.cc:35:14: fatal error: bluetooth/bluetooth.h: Datei oder Verzeichnis nicht gefunden #include <bluetooth/bluetooth.h> ^~~~~~~~~~~~~~~~~~~~~~~compilation terminated. make: *** [BluetoothSerialPort.target.mk:107: Release/obj.target/BluetoothSerialPort/src/linux/DeviceINQ.o] Fehler 1 gyp ERR! build error gyp ERR! stack Error: `make` failed with exit code: 2gyp ERR! stack at ChildProcess.onExit (/usr/lib/node_modules/npm/node_modules/node-gyp/lib/build.js:191:23)gyp ERR! stack at ChildProcess.emit (events.js:198:13)gyp ERR! stack at Process.ChildProcess._handle.onexit (internal/child_process.js:248:12) gyp ERR! System Linux 4.19.97-v7l+gyp ERR! command "/usr/bin/node" "/usr/lib/node_modules/npm/node_modules/node-gyp/bin/node-gyp.js" "configure" "build" gyp ERR! cwd /opt/iobroker/node_modules/node-bluetoothgyp ERR! node -v v10.19.0gyp ERR! node-gyp -v v5.0.5gyp ERR! not ok In file included from ../src/./serialport.h:6, from ../src/serialport.cpp:1:../../../nan/nan.h: In function ‘void Nan::AsyncQueueWorker(Nan::AsyncWorker*)’:../../../nan/nan.h:2298:62: warning: cast between incompatible function types from ‘void (*)(uv_work_t*)’ {aka ‘void (*)(uv_work_s*)’} to ‘uv_after_work_cb’ {aka ‘void (*)(uv_work_s*, int)’} [-Wcast-function-type] , reinterpret_cast<uv_after_work_cb>(AsyncExecuteComplete) ^ ../src/serialport.cpp: In function ‘Nan::NAN_METHOD_RETURN_TYPE Open(Nan::NAN_METHOD_ARGS_TYPE)’:../src/serialport.cpp:78:69: warning: cast between incompatible function types from ‘void (*)(uv_work_t*)’ {aka ‘void (*)(uv_work_s*)’} to ‘uv_after_work_cb’ {aka ‘void (*)(uv_work_s*, int)’} [-Wcast-function-type] uv_queue_work(uv_default_loop(), req, EIO_Open, (uv_after_work_cb)EIO_AfterOpen); ^~~~~~~~~~~~~../src/serialport.cpp: In function ‘Nan::NAN_METHOD_RETURN_TYPE Update(Nan::NAN_METHOD_ARGS_TYPE)’:../src/serialport.cpp:135:71: warning: cast between incompatible function types from ‘void (*)(uv_work_t*)’ {aka ‘void (*)(uv_work_s*)’} to ‘uv_after_work_cb’ {aka ‘void (*)(uv_work_s*, int)’} [-Wcast-function-type] uv_queue_work(uv_default_loop(), req, EIO_Update, (uv_after_work_cb)EIO_AfterUpdate); ^~~~~~~~~~~~~~~ ../src/serialport.cpp: In function ‘Nan::NAN_METHOD_RETURN_TYPE Close(Nan::NAN_METHOD_ARGS_TYPE)’:../src/serialport.cpp:175:70: warning: cast between incompatible function types from ‘void (*)(uv_work_t*)’ {aka ‘void (*)(uv_work_s*)’} to ‘uv_after_work_cb’ {aka ‘void (*)(uv_work_s*, int)’} [-Wcast-function-type] uv_queue_work(uv_default_loop(), req, EIO_Close, (uv_after_work_cb)EIO_AfterClose); ^~~~~~~~~~~~~~ ../src/serialport.cpp: In function ‘Nan::NAN_METHOD_RETURN_TYPE Flush(Nan::NAN_METHOD_ARGS_TYPE)’:../src/serialport.cpp:215:70: warning: cast between incompatible function types from ‘void (*)(uv_work_t*)’ {aka ‘void (*)(uv_work_s*)’} to ‘uv_after_work_cb’ {aka ‘void (*)(uv_work_s*, int)’} [-Wcast-function-type] uv_queue_work(uv_default_loop(), req, EIO_Flush, (uv_after_work_cb)EIO_AfterFlush); ^~~~~~~~~~~~~~../src/serialport.cpp: In function ‘Nan::NAN_METHOD_RETURN_TYPE Set(Nan::NAN_METHOD_ARGS_TYPE)’:../src/serialport.cpp:270:68: warning: cast between incompatible function types from ‘void (*)(uv_work_t*)’ {aka ‘void (*)(uv_work_s*)’} to ‘uv_after_work_cb’ {aka ‘void (*)(uv_work_s*, int)’} [-Wcast-function-type] uv_queue_work(uv_default_loop(), req, EIO_Set, (uv_after_work_cb)EIO_AfterSet); ^~~~~~~~~~~~ ../src/serialport.cpp: In function ‘Nan::NAN_METHOD_RETURN_TYPE Get(Nan::NAN_METHOD_ARGS_TYPE)’:../src/serialport.cpp:314:68: warning: cast between incompatible function types from ‘void (*)(uv_work_t*)’ {aka ‘void (*)(uv_work_s*)’} to ‘uv_after_work_cb’ {aka ‘void (*)(uv_work_s*, int)’} [-Wcast-function-type] uv_queue_work(uv_default_loop(), req, EIO_Get, (uv_after_work_cb)EIO_AfterGet); ^~~~~~~~~~~~ ../src/serialport.cpp: In function ‘Nan::NAN_METHOD_RETURN_TYPE GetBaudRate(Nan::NAN_METHOD_ARGS_TYPE)’:../src/serialport.cpp:363:76: warning: cast between incompatible function types from ‘void (*)(uv_work_t*)’ {aka ‘void (*)(uv_work_s*)’} to ‘uv_after_work_cb’ {aka ‘void (*)(uv_work_s*, int)’} [-Wcast-function-type] uv_queue_work(uv_default_loop(), req, EIO_GetBaudRate, (uv_after_work_cb)EIO_AfterGetBaudRate); ^~~~~~~~~~~~~~~~~~~~ ../src/serialport.cpp: In function ‘Nan::NAN_METHOD_RETURN_TYPE Drain(Nan::NAN_METHOD_ARGS_TYPE)’:../src/serialport.cpp:409:70: warning: cast between incompatible function types from ‘void (*)(uv_work_t*)’ {aka ‘void (*)(uv_work_s*)’} to ‘uv_after_work_cb’ {aka ‘void (*)(uv_work_s*, int)’} [-Wcast-function-type] uv_queue_work(uv_default_loop(), req, EIO_Drain, (uv_after_work_cb)EIO_AfterDrain); ^~~~~~~~~~~~~~ ../src/serialport.cpp: At global scope:../src/serialport.cpp:430:28: warning: unnecessary parentheses in declaration of ‘ToParityEnum’ [-Wparentheses] SerialPortParity NAN_INLINE(ToParityEnum(const v8::Local<v8::String>& v8str)) { ^ ../src/serialport.cpp:449:30: warning: unnecessary parentheses in declaration of ‘ToStopBitEnum’ [-Wparentheses] SerialPortStopBits NAN_INLINE(ToStopBitEnum(double stopBits)) { ^ In file included from ../../../nan/nan.h:54, from ../src/./serialport.h:6, from ../src/serialport.cpp:1:/home/iobroker/.cache/node-gyp/10.19.0/include/node/node.h:573:43: warning: cast between incompatible function types from ‘void (*)(Nan::ADDON_REGISTER_FUNCTION_ARGS_TYPE)’ {aka ‘void (*)(v8::Local<v8::Object>)’} to ‘node::addon_register_func’ {aka ‘void (*)(v8::Local<v8::Object>, v8::Local<v8::Value>, void*)’} [-Wcast-function-type] (node::addon_register_func) (regfunc), \ ^/home/iobroker/.cache/node-gyp/10.19.0/include/node/node.h:607:3: note: in expansion of macro ‘NODE_MODULE_X’ NODE_MODULE_X(modname, regfunc, NULL, 0) // NOLINT (readability/null_usage) ^~~~~~~~~~~~~../src/serialport.cpp:483:1: note: in expansion of macro ‘NODE_MODULE’ NODE_MODULE(serialport, init); ^~~~~~~~~~~ In file included from /home/iobroker/.cache/node-gyp/10.19.0/include/node/node.h:63, from ../../../nan/nan.h:54, from ../src/./serialport.h:6, from ../src/serialport.cpp:1:/home/iobroker/.cache/node-gyp/10.19.0/include/node/v8.h: In instantiation of ‘void v8::PersistentBase<T>::SetWeak(P*, typename v8::WeakCallbackInfo<P>::Callback, v8::WeakCallbackType) [with P = node::ObjectWrap; T = v8::Object; typename v8::WeakCallbackInfo<P>::Callback = void (*)(const v8::WeakCallbackInfo<node::ObjectWrap>&)]’:/home/iobroker/.cache/node-gyp/10.19.0/include/node/node_object_wrap.h:84:78: required from here/home/iobroker/.cache/node-gyp/10.19.0/include/node/v8.h:9502:16: warning: cast between incompatible function types from ‘v8::WeakCallbackInfo<node::ObjectWrap>::Callback’ {aka ‘void (*)(const v8::WeakCallbackInfo<node::ObjectWrap>&)’} to ‘Callback’ {aka ‘void (*)(const v8::WeakCallbackInfo<void>&)’} [-Wcast-function-type] reinterpret_cast<Callback>(callback), type); ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ /home/iobroker/.cache/node-gyp/10.19.0/include/node/v8.h: In instantiation of ‘void v8::PersistentBase<T>::SetWeak(P*, typename v8::WeakCallbackInfo<P>::Callback, v8::WeakCallbackType) [with P = Nan::ObjectWrap; T = v8::Object; typename v8::WeakCallbackInfo<P>::Callback = void (*)(const v8::WeakCallbackInfo<Nan::ObjectWrap>&)]’:../../../nan/nan_object_wrap.h:65:61: required from here/home/iobroker/.cache/node-gyp/10.19.0/include/node/v8.h:9502:16: warning: cast between incompatible function types from ‘v8::WeakCallbackInfo<Nan::ObjectWrap>::Callback’ {aka ‘void (*)(const v8::WeakCallbackInfo<Nan::ObjectWrap>&)’} to ‘Callback’ {aka ‘void (*)(const v8::WeakCallbackInfo<void>&)’} [-Wcast-function-type] In file included from ../src/serialport.h:6, from ../src/serialport_unix.cpp:2:../../../nan/nan.h: In function ‘void Nan::AsyncQueueWorker(Nan::AsyncWorker*)’:../../../nan/nan.h:2298:62: warning: cast between incompatible function types from ‘void (*)(uv_work_t*)’ {aka ‘void (*)(uv_work_s*)’} to ‘uv_after_work_cb’ {aka ‘void (*)(uv_work_s*, int)’} [-Wcast-function-type] , reinterpret_cast<uv_after_work_cb>(AsyncExecuteComplete) ^ In file included from /home/iobroker/.cache/node-gyp/10.19.0/include/node/node.h:63, from ../../../nan/nan.h:54, from ../src/serialport.h:6, from ../src/serialport_unix.cpp:2:/home/iobroker/.cache/node-gyp/10.19.0/include/node/v8.h: In instantiation of ‘void v8::PersistentBase<T>::SetWeak(P*, typename v8::WeakCallbackInfo<P>::Callback, v8::WeakCallbackType) [with P = node::ObjectWrap; T = v8::Object; typename v8::WeakCallbackInfo<P>::Callback = void (*)(const v8::WeakCallbackInfo<node::ObjectWrap>&)]’:/home/iobroker/.cache/node-gyp/10.19.0/include/node/node_object_wrap.h:84:78: required from here/home/iobroker/.cache/node-gyp/10.19.0/include/node/v8.h:9502:16: warning: cast between incompatible function types from ‘v8::WeakCallbackInfo<node::ObjectWrap>::Callback’ {aka ‘void (*)(const v8::WeakCallbackInfo<node::ObjectWrap>&)’} to ‘Callback’ {aka ‘void (*)(const v8::WeakCallbackInfo<void>&)’} [-Wcast-function-type] reinterpret_cast<Callback>(callback), type); ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ /home/iobroker/.cache/node-gyp/10.19.0/include/node/v8.h: In instantiation of ‘void v8::PersistentBase<T>::SetWeak(P*, typename v8::WeakCallbackInfo<P>::Callback, v8::WeakCallbackType) [with P = Nan::ObjectWrap; T = v8::Object; typename v8::WeakCallbackInfo<P>::Callback = void (*)(const v8::WeakCallbackInfo<Nan::ObjectWrap>&)]’:../../../nan/nan_object_wrap.h:65:61: required from here/home/iobroker/.cache/node-gyp/10.19.0/include/node/v8.h:9502:16: warning: cast between incompatible function types from ‘v8::WeakCallbackInfo<Nan::ObjectWrap>::Callback’ {aka ‘void (*)(const v8::WeakCallbackInfo<Nan::ObjectWrap>&)’} to ‘Callback’ {aka ‘void (*)(const v8::WeakCallbackInfo<void>&)’} [-Wcast-function-type] ../src/serialport_unix.cpp: In function ‘int setup(int, OpenBaton*)’:../src/serialport_unix.cpp:176:60: warning: ‘%s’ directive output may be truncated writing up to 1023 bytes into a region of size 1005 [-Wformat-truncation=] snprintf(data->errorString, sizeof(data->errorString), "Error %s Cannot open %s", strerror(errno), data->path); ^~~~~~~~~~~~~~~~~~~~~~~~~../src/serialport_unix.cpp:176:13: note: ‘snprintf’ output 20 or more bytes (assuming 1043) into a destination of size 1024 snprintf(data->errorString, sizeof(data->errorString), "Error %s Cannot open %s", strerror(errno), data->path); ~~~~~~~~^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ ../src/serialport_unix.cpp: In function ‘void EIO_Open(uv_work_t*)’:../src/serialport_unix.cpp:86:60: warning: ‘%s’ directive output may be truncated writing up to 1023 bytes into a region of size 1003 [-Wformat-truncation=] snprintf(data->errorString, sizeof(data->errorString), "Error: %s, cannot open %s", strerror(errno), data->path); ^~~~~~~~~~~~~~~~~~~~~~~~~~~../src/serialport_unix.cpp:86:13: note: ‘snprintf’ output 22 or more bytes (assuming 1045) into a destination of size 1024 snprintf(data->errorString, sizeof(data->errorString), "Error: %s, cannot open %s", strerror(errno), data->path); ~~~~~~~~^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ In file included from ../src/poller.cpp:1:../../../nan/nan.h: In function ‘void Nan::AsyncQueueWorker(Nan::AsyncWorker*)’:../../../nan/nan.h:2298:62: warning: cast between incompatible function types from ‘void (*)(uv_work_t*)’ {aka ‘void (*)(uv_work_s*)’} to ‘uv_after_work_cb’ {aka ‘void (*)(uv_work_s*, int)’} [-Wcast-function-type] , reinterpret_cast<uv_after_work_cb>(AsyncExecuteComplete) ^ In file included from /home/iobroker/.cache/node-gyp/10.19.0/include/node/node.h:63, from ../../../nan/nan.h:54, from ../src/poller.cpp:1:/home/iobroker/.cache/node-gyp/10.19.0/include/node/v8.h: In instantiation of ‘void v8::PersistentBase<T>::SetWeak(P*, typename v8::WeakCallbackInfo<P>::Callback, v8::WeakCallbackType) [with P = node::ObjectWrap; T = v8::Object; typename v8::WeakCallbackInfo<P>::Callback = void (*)(const v8::WeakCallbackInfo<node::ObjectWrap>&)]’:/home/iobroker/.cache/node-gyp/10.19.0/include/node/node_object_wrap.h:84:78: required from here/home/iobroker/.cache/node-gyp/10.19.0/include/node/v8.h:9502:16: warning: cast between incompatible function types from ‘v8::WeakCallbackInfo<node::ObjectWrap>::Callback’ {aka ‘void (*)(const v8::WeakCallbackInfo<node::ObjectWrap>&)’} to ‘Callback’ {aka ‘void (*)(const v8::WeakCallbackInfo<void>&)’} [-Wcast-function-type] reinterpret_cast<Callback>(callback), type); ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ /home/iobroker/.cache/node-gyp/10.19.0/include/node/v8.h: In instantiation of ‘void v8::PersistentBase<T>::SetWeak(P*, typename v8::WeakCallbackInfo<P>::Callback, v8::WeakCallbackType) [with P = Nan::ObjectWrap; T = v8::Object; typename v8::WeakCallbackInfo<P>::Callback = void (*)(const v8::WeakCallbackInfo<Nan::ObjectWrap>&)]’:../../../nan/nan_object_wrap.h:65:61: required from here/home/iobroker/.cache/node-gyp/10.19.0/include/node/v8.h:9502:16: warning: cast between incompatible function types from ‘v8::WeakCallbackInfo<Nan::ObjectWrap>::Callback’ {aka ‘void (*)(const v8::WeakCallbackInfo<Nan::ObjectWrap>&)’} to ‘Callback’ {aka ‘void (*)(const v8::WeakCallbackInfo<void>&)’} [-Wcast-function-type] host.raspberrypi install adapter zigbee ERROR: Some packets could not be installed. Please install them manually upload [150] zigbee.admin /opt/iobroker/node_modules/iobroker.zigbee/admin/img/unknown.png img/unknown.png image/png upload [100] zigbee.admin /opt/iobroker/node_modules/iobroker.zigbee/admin/img/osram_g_spot.png img/osram_g_spot.png image/png upload [90] zigbee.admin /opt/iobroker/node_modules/iobroker.zigbee/admin/img/lumi_vibration.png img/lumi_vibration.png image/png upload [80] zigbee.admin /opt/iobroker/node_modules/iobroker.zigbee/admin/img/livolo.png img/livolo.png image/png upload [70] zigbee.admin /opt/iobroker/node_modules/iobroker.zigbee/admin/img/konke_kpft.png img/konke_kpft.png image/png upload [60] zigbee.admin /opt/iobroker/node_modules/iobroker.zigbee/admin/img/innr.png img/innr.png image/png upload [50] zigbee.admin /opt/iobroker/node_modules/iobroker.zigbee/admin/img/ikea_led1837r5.PNG img/ikea_led1837r5.PNG image/png upload [40] zigbee.admin /opt/iobroker/node_modules/iobroker.zigbee/admin/img/hs1sa.png img/hs1sa.png image/png upload [30] zigbee.admin /opt/iobroker/node_modules/iobroker.zigbee/admin/img/fnb56zsw01.png img/fnb56zsw01.png image/png upload [20] zigbee.admin /opt/iobroker/node_modules/iobroker.zigbee/admin/img/ctrl_neutral1.png img/ctrl_neutral1.png image/png upload [19] zigbee.admin /opt/iobroker/node_modules/iobroker.zigbee/admin/img/ctrl_ln2.png img/ctrl_ln2.png image/png upload [18] zigbee.admin /opt/iobroker/node_modules/iobroker.zigbee/admin/img/ctrl_ln1.png img/ctrl_ln1.png image/png upload [17] zigbee.admin /opt/iobroker/node_modules/iobroker.zigbee/admin/img/contact.png img/contact.png image/png upload [16] zigbee.admin /opt/iobroker/node_modules/iobroker.zigbee/admin/img/bitron_plug.png img/bitron_plug.png image/png upload [15] zigbee.admin /opt/iobroker/node_modules/iobroker.zigbee/admin/img/battery_v.png img/battery_v.png image/png upload [14] zigbee.admin /opt/iobroker/node_modules/iobroker.zigbee/admin/img/battery_p.png img/battery_p.png image/png upload [13] zigbee.admin /opt/iobroker/node_modules/iobroker.zigbee/admin/img/basiczbr3.png img/basiczbr3.png image/png upload [12] zigbee.admin /opt/iobroker/node_modules/iobroker.zigbee/admin/img/aqara_temperature_sensor.png img/aqara_temperature_sensor.png image/png upload [11] zigbee.admin /opt/iobroker/node_modules/iobroker.zigbee/admin/img/aqara_switch.png img/aqara_switch.png image/png upload [10] zigbee.admin /opt/iobroker/node_modules/iobroker.zigbee/admin/img/aqara_numan_body_sensor.png img/aqara_numan_body_sensor.png image/png upload [9] zigbee.admin /opt/iobroker/node_modules/iobroker.zigbee/admin/img/aqara_curtain.png img/aqara_curtain.png image/png upload [8] zigbee.admin /opt/iobroker/node_modules/iobroker.zigbee/admin/img/aqara_bulb.png img/aqara_bulb.png image/png upload [7] zigbee.admin /opt/iobroker/node_modules/iobroker.zigbee/admin/img/Ikea_fyrtur.png img/Ikea_fyrtur.png image/png upload [6] zigbee.admin /opt/iobroker/node_modules/iobroker.zigbee/admin/img/FLOALT.panel.WS.png img/FLOALT.panel.WS.png image/png upload [5] zigbee.admin /opt/iobroker/node_modules/iobroker.zigbee/admin/img/Eurotronic_Spirit_04.png img/Eurotronic_Spirit_04.png image/png upload [4] zigbee.admin /opt/iobroker/node_modules/iobroker.zigbee/admin/img/DIYRuZ.png img/DIYRuZ.png image/png upload [3] zigbee.admin /opt/iobroker/node_modules/iobroker.zigbee/admin/img/86sw2.png img/86sw2.png image/png upload [2] zigbee.admin /opt/iobroker/node_modules/iobroker.zigbee/admin/img/86sw1.png img/86sw1.png image/png upload [1] zigbee.admin /opt/iobroker/node_modules/iobroker.zigbee/admin/img/86plug.png img/86plug.png image/png upload [0] zigbee.admin /opt/iobroker/node_modules/iobroker.zigbee/admin/admin.js admin.js application/javascript host.raspberrypi object system.adapter.zigbee created/updated host.raspberrypi create instance zigbee host.raspberrypi object zigbee.0.info.groups created host.raspberrypi object zigbee.0.info.pairingMessage created host.raspberrypi object zigbee.0.info.pairingCountdown created host.raspberrypi object zigbee.0.info.pairingMode created host.raspberrypi object zigbee.0.info.connection created host.raspberrypi object zigbee.0.info created host.raspberrypi object system.adapter.zigbee.0.sigKill created host.raspberrypi object system.adapter.zigbee.0.eventLoopLag created host.raspberrypi object system.adapter.zigbee.0.outputCount created host.raspberrypi object system.adapter.zigbee.0.inputCount created host.raspberrypi object system.adapter.zigbee.0.uptime created host.raspberrypi object system.adapter.zigbee.0.memRss created host.raspberrypi object system.adapter.zigbee.0.memHeapTotal created host.raspberrypi object system.adapter.zigbee.0.memHeapUsed created host.raspberrypi object system.adapter.zigbee.0.cputime created host.raspberrypi object system.adapter.zigbee.0.cpu created host.raspberrypi object system.adapter.zigbee.0.compactMode created host.raspberrypi object system.adapter.zigbee.0.connected created host.raspberrypi object system.adapter.zigbee.0.alive created host.raspberrypi object system.adapter.zigbee.0 created process exited with code 0 -
Sorry, hat sich wohlmöglich erledigt, zumindest ist er wieder grün.
Serielle Schnittstelle war das Problem.
Mit dem Befehl bin ich drauf gekommen und musste ttyACM0 wieder im Zigbee Adapter hinterlegen.
simon@debian-simon:~$ ls -la /dev/serial/by-id insgesamt 0 drwxr-xr-x 2 root root 60 Feb 7 07:02 . drwxr-xr-x 4 root root 80 Feb 7 07:02 .. lrwxrwxrwx 1 root root 13 Feb 7 07:02 usb-Texas_Instruments_TI_CC2531_USB_CDC__ _0X00124B000BE5ADB1-if00 -> ../../ttyACM0 -
Ich habe ein ähnliches Problem. Vorhin die VM (in Proxmox) neu gestartet und alle Instanzen kamen hoch, bis auf Zigbee - Meldung: 'You need save and run adapter before pairing'. Dann nochmals versucht die Instanz zu starten, später klappte es dann. Hier mal die Debug-Logs.
2020-02-20 17:30:01.598 - error: zigbee.0 (1445) Failed to start Zigbee 2020-02-20 17:30:01.598 - error: zigbee.0 (1445) Error: AREQ - SYS - resetInd after 30000ms at Timeout.object.timer.setTimeout [as _onTimeout] (/opt/iobroker/node_modules/zigbee-herdsman/dist/utils/waitress.js:44:24) at ontimeout (timers.js:436:11) at tryOnTimeout (timers.js:300:5) at listOnTimeout (timers.js:263:5) at Timer.processTimers (timers.js:223:10) 2020-02-20 17:30:04.020 - info: host.iobroker-01 instance system.adapter.weatherunderground.0 started with pid 1543 2020-02-20 17:30:08.026 - info: host.iobroker-01 instance system.adapter.daswetter.0 started with pid 1570 2020-02-20 17:30:08.918 - info: host.iobroker-01 instance system.adapter.weatherunderground.0 terminated with code 0 (NO_ERROR) 2020-02-20 17:30:10.990 - info: host.iobroker-01 instance system.adapter.ical.0 terminated with code 0 (NO_ERROR) 2020-02-20 17:30:11.599 - info: zigbee.0 (1445) Try to reconnect. 1 attempts left 2020-02-20 17:30:11.599 - info: zigbee.0 (1445) Starting Zigbee... 2020-02-20 17:30:11.677 - error: zigbee.0 (1445) Failed to start Zigbee 2020-02-20 17:30:11.677 - error: zigbee.0 (1445) Error: Error while opening serialport 'Error: Error Resource temporarily unavailable Cannot lock port' at Znp. (/opt/iobroker/node_modules/zigbee-herdsman/dist/adapter/z-stack/znp/znp.js:113:32) at Generator.next () at /opt/iobroker/node_modules/zigbee-herdsman/dist/adapter/z-stack/znp/znp.js:8:71 at new Promise () at __awaiter (/opt/iobroker/node_modules/zigbee-herdsman/dist/adapter/z-stack/znp/znp.js:4:12) at SerialPort.serialPort.open (/opt/iobroker/node_modules/zigbee-herdsman/dist/adapter/z-stack/znp/znp.js:111:49) at SerialPort._error (/opt/iobroker/node_modules/@serialport/stream/lib/index.js:198:14) at binding.open.then.err (/opt/iobroker/node_modules/@serialport/stream/lib/index.js:242:12) 2020-02-20 17:31:09.623 - warn: node-red.0 (1728) 20 Feb 17:31:09 - [warn] Projekte inaktiviert: editorTheme.projects.enabled=false 2020-02-20 17:31:29.051 - info: javascript.0 (497) script.js.common.Heimnetz.var_Anwesenheit_Eltern_radar2: var_Anwesenheit_Eltern getriggert... 2020-02-20 17:31:41.758 - info: javascript.0 (497) script.js.common.Heimnetz.var_Anwesenheit_Eltern_radar2: var_Anwesenheit_Eltern getriggert... 2020-02-20 17:32:59.051 - info: javascript.0 (497) script.js.common.Heimnetz.var_Anwesenheit_Eltern_radar2: Variable Anwesenheit_Eltern = true 2020-02-20 17:32:59.056 - info: javascript.0 (497) script.js.common.Heimnetz.HWR_Zirkulationspumpe: Zirkulationspumpe eingeschaltet 2020-02-20 17:33:11.759 - info: javascript.0 (497) script.js.common.Heimnetz.var_Anwesenheit_Eltern_radar2: Variable Anwesenheit_Eltern = true 2020-02-20 17:33:11.760 - info: javascript.0 (497) script.js.common.Heimnetz.HWR_Zirkulationspumpe: Zirkulationspumpe eingeschaltet 2020-02-20 17:34:13.209 - info: tankerkoenig.0 (1416) Reading data from tankerkoenig ... 2020-02-20 17:34:47.838 - info: javascript.0 (497) script.js.common.Heimnetz.Wassertank_Fuellstand: Abweichung: 0 2020-02-20 17:35:00.009 - info: host.iobroker-01 instance system.adapter.dwd.0 started with pid 2080 2020-02-20 17:35:04.017 - info: host.iobroker-01 instance system.adapter.weatherunderground.0 started with pid 2095 2020-02-20 17:35:05.455 - info: host.iobroker-01 instance system.adapter.dwd.0 terminated with code 0 (NO_ERROR) 2020-02-20 17:35:09.844 - info: host.iobroker-01 instance system.adapter.weatherunderground.0 terminated with code 0 (NO_ERROR) 2020-02-20 17:35:28.148 - info: host.iobroker-01 "system.adapter.zigbee.0" disabled 2020-02-20 17:35:28.148 - info: host.iobroker-01 stopInstance system.adapter.zigbee.0 (force=false, process=true) 2020-02-20 17:35:28.148 - info: host.iobroker-01 stopInstance system.adapter.zigbee.0 send kill signal 2020-02-20 17:35:28.150 - info: zigbee.0 (1445) Got terminate signal TERMINATE_YOURSELF 2020-02-20 17:35:28.150 - info: zigbee.0 (1445) cleaned everything up... 2020-02-20 17:35:28.152 - info: zigbee.0 (1445) Zigbee: disabling joining new devices. 2020-02-20 17:35:28.152 - error: zigbee.0 (1445) Failed to stop zigbee (TypeError: Cannot read property 'getEntries' of null at Function.loadFromDatabaseIfNecessary (/opt/iobroker/node_modules/zigbee-herdsman/dist/controller/model/group.js:64:55) at Function.all (/opt/iobroker/node_modules/zigbee-herdsman/dist/controller/model/group.js:76:15) at Controller. (/opt/iobroker/node_modules/zigbee-herdsman/dist/controller/controller.js:173:49) at Generator.next () at /opt/iobroker/node_modules/zigbee-herdsman/dist/controller/controller.js:8:71 at new Promise () at __awaiter (/opt/iobroker/node_modules/zigbee-herdsman/dist/controller/controller.js:4:12) at Controller.stop (/opt/iobroker/node_modules/zigbee-herdsman/dist/controller/controller.js:169:16) at ZigbeeController.stop (/opt/iobroker/node_modules/iobroker.zigbee/lib/zigbeecontroller.js:297:33) at process._tickCallback (internal/process/next_tick.js:68:7)) 2020-02-20 17:35:28.153 - info: zigbee.0 (1445) terminating 2020-02-20 17:35:28.153 - info: zigbee.0 (1445) Terminated (START_IMMEDIATELY_AFTER_STOP): Without reason 2020-02-20 17:35:28.687 - error: host.iobroker-01 Caught by controller[0]: (node:1445) UnhandledPromiseRejectionWarning: TypeError: Cannot read property 'getEntries' of null 2020-02-20 17:35:28.687 - error: host.iobroker-01 Caught by controller[0]: at Function.loadFromDatabaseIfNecessary (/opt/iobroker/node_modules/zigbee-herdsman/dist/controller/model/device.js:135:55) 2020-02-20 17:35:28.687 - error: host.iobroker-01 Caught by controller[0]: at Function.all (/opt/iobroker/node_modules/zigbee-herdsman/dist/controller/model/device.js:155:16) 2020-02-20 17:35:28.687 - error: host.iobroker-01 Caught by controller[0]: at Controller.getDevices (/opt/iobroker/node_modules/zigbee-herdsman/dist/controller/controller.js:218:31) 2020-02-20 17:35:28.687 - error: host.iobroker-01 Caught by controller[0]: at ZigbeeController.getClients (/opt/iobroker/node_modules/iobroker.zigbee/lib/zigbeecontroller.js:195:49) 2020-02-20 17:35:28.687 - error: host.iobroker-01 Caught by controller[0]: at DeviceAvailability.stop (/opt/iobroker/node_modules/iobroker.zigbee/lib/zbDeviceAvailability.js:123:43) 2020-02-20 17:35:28.687 - error: host.iobroker-01 Caught by controller[0]: at ZigbeeController.callExtensionMethod (/opt/iobroker/node_modules/iobroker.zigbee/lib/zigbeecontroller.js:181:42) 2020-02-20 17:35:28.687 - error: host.iobroker-01 Caught by controller[0]: at ZigbeeController.stop (/opt/iobroker/node_modules/iobroker.zigbee/lib/zigbeecontroller.js:293:20) 2020-02-20 17:35:28.687 - error: host.iobroker-01 Caught by controller[0]: at Zigbee.onUnload (/opt/iobroker/node_modules/iobroker.zigbee/main.js:317:41) 2020-02-20 17:35:28.687 - error: host.iobroker-01 Caught by controller[0]: at Zigbee.emit (events.js:198:13) 2020-02-20 17:35:28.687 - error: host.iobroker-01 Caught by controller[0]: at stop (/opt/iobroker/node_modules/iobroker.js-controller/lib/adapter.js:7226:22) 2020-02-20 17:35:28.687 - error: host.iobroker-01 Caught by controller[1]: (node:1445) UnhandledPromiseRejectionWarning: Unhandled promise rejection. This error originated either by throwing inside of an async function without a catch block, or by rejecting a promise which was not handled with .catch(). (rejection id: 2) 2020-02-20 17:35:28.687 - error: host.iobroker-01 Caught by controller[1]: (node:1445) [DEP0018] DeprecationWarning: Unhandled promise rejections are deprecated. In the future, promise rejections that are not handled will terminate the Node.js process with a non-zero exit code. 2020-02-20 17:35:28.687 - info: host.iobroker-01 instance system.adapter.zigbee.0 terminated with code 156 (156) 2020-02-20 17:35:34.758 - info: host.iobroker-01 "system.adapter.zigbee.0" enabled 2020-02-20 17:35:34.766 - info: host.iobroker-01 instance system.adapter.zigbee.0 started with pid 2157 2020-02-20 17:35:36.066 - info: zigbee.0 (2157) starting. Version 1.0.3 in /opt/iobroker/node_modules/iobroker.zigbee, node: v10.19.0 2020-02-20 17:35:36.079 - info: zigbee.0 (2157) Starting Zigbee... 2020-02-20 17:35:48.374 - info: host.iobroker-01 stopInstance system.adapter.zigbee.0 (force=false, process=true) 2020-02-20 17:35:48.375 - info: host.iobroker-01 stopInstance system.adapter.zigbee.0 send kill signal 2020-02-20 17:35:48.377 - info: zigbee.0 (2157) Got terminate signal TERMINATE_YOURSELF 2020-02-20 17:35:48.377 - info: zigbee.0 (2157) cleaned everything up... 2020-02-20 17:35:48.380 - info: zigbee.0 (2157) Zigbee: disabling joining new devices. 2020-02-20 17:35:48.381 - error: zigbee.0 (2157) Failed to stop zigbee (TypeError: Cannot read property 'getEntries' of null at Function.loadFromDatabaseIfNecessary (/opt/iobroker/node_modules/zigbee-herdsman/dist/controller/model/group.js:64:55) at Function.all (/opt/iobroker/node_modules/zigbee-herdsman/dist/controller/model/group.js:76:15) at Controller. (/opt/iobroker/node_modules/zigbee-herdsman/dist/controller/controller.js:173:49) at Generator.next () at /opt/iobroker/node_modules/zigbee-herdsman/dist/controller/controller.js:8:71 at new Promise () at __awaiter (/opt/iobroker/node_modules/zigbee-herdsman/dist/controller/controller.js:4:12) at Controller.stop (/opt/iobroker/node_modules/zigbee-herdsman/dist/controller/controller.js:169:16) at ZigbeeController.stop (/opt/iobroker/node_modules/iobroker.zigbee/lib/zigbeecontroller.js:297:33) at process._tickCallback (internal/process/next_tick.js:68:7)) 2020-02-20 17:35:48.381 - info: zigbee.0 (2157) terminating 2020-02-20 17:35:48.381 - info: zigbee.0 (2157) Terminated (START_IMMEDIATELY_AFTER_STOP): Without reason 2020-02-20 17:35:48.915 - error: host.iobroker-01 Caught by controller[0]: (node:2157) UnhandledPromiseRejectionWarning: TypeError: Cannot read property 'getEntries' of null 2020-02-20 17:35:48.915 - error: host.iobroker-01 Caught by controller[0]: at Function.loadFromDatabaseIfNecessary (/opt/iobroker/node_modules/zigbee-herdsman/dist/controller/model/device.js:135:55) 2020-02-20 17:35:48.915 - error: host.iobroker-01 Caught by controller[0]: at Function.all (/opt/iobroker/node_modules/zigbee-herdsman/dist/controller/model/device.js:155:16) 2020-02-20 17:35:48.915 - error: host.iobroker-01 Caught by controller[0]: at Controller.getDevices (/opt/iobroker/node_modules/zigbee-herdsman/dist/controller/controller.js:218:31) 2020-02-20 17:35:48.915 - error: host.iobroker-01 Caught by controller[0]: at ZigbeeController.getClients (/opt/iobroker/node_modules/iobroker.zigbee/lib/zigbeecontroller.js:195:49) 2020-02-20 17:35:48.915 - error: host.iobroker-01 Caught by controller[0]: at DeviceAvailability.stop (/opt/iobroker/node_modules/iobroker.zigbee/lib/zbDeviceAvailability.js:123:43) 2020-02-20 17:35:48.915 - error: host.iobroker-01 Caught by controller[0]: at ZigbeeController.callExtensionMethod (/opt/iobroker/node_modules/iobroker.zigbee/lib/zigbeecontroller.js:181:42) 2020-02-20 17:35:48.915 - error: host.iobroker-01 Caught by controller[0]: at ZigbeeController.stop (/opt/iobroker/node_modules/iobroker.zigbee/lib/zigbeecontroller.js:293:20) 2020-02-20 17:35:48.915 - error: host.iobroker-01 Caught by controller[0]: at Zigbee.onUnload (/opt/iobroker/node_modules/iobroker.zigbee/main.js:317:41) 2020-02-20 17:35:48.915 - error: host.iobroker-01 Caught by controller[0]: at Zigbee.emit (events.js:198:13) 2020-02-20 17:35:48.915 - error: host.iobroker-01 Caught by controller[0]: at stop (/opt/iobroker/node_modules/iobroker.js-controller/lib/adapter.js:7226:22) 2020-02-20 17:35:48.915 - error: host.iobroker-01 Caught by controller[1]: (node:2157) UnhandledPromiseRejectionWarning: Unhandled promise rejection. This error originated either by throwing inside of an async function without a catch block, or by rejecting a promise which was not handled with .catch(). (rejection id: 2) 2020-02-20 17:35:48.915 - error: host.iobroker-01 Caught by controller[1]: (node:2157) [DEP0018] DeprecationWarning: Unhandled promise rejections are deprecated. In the future, promise rejections that are not handled will terminate the Node.js process with a non-zero exit code. 2020-02-20 17:35:48.915 - info: host.iobroker-01 instance system.adapter.zigbee.0 terminated with code 156 (156) 2020-02-20 17:35:50.882 - info: host.iobroker-01 instance system.adapter.zigbee.0 started with pid 2174 2020-02-20 17:35:52.207 - info: zigbee.0 (2174) starting. Version 1.0.3 in /opt/iobroker/node_modules/iobroker.zigbee, node: v10.19.0 2020-02-20 17:35:52.224 - info: zigbee.0 (2174) Starting Zigbee... 2020-02-20 17:36:41.327 - error: zigbee.0 (2174) Failed to start Zigbee 2020-02-20 17:36:41.327 - error: zigbee.0 (2174) Error: AREQ - SYS - resetInd after 30000ms at Timeout.object.timer.setTimeout [as _onTimeout] (/opt/iobroker/node_modules/zigbee-herdsman/dist/utils/waitress.js:44:24) at ontimeout (timers.js:436:11) at tryOnTimeout (timers.js:300:5) at listOnTimeout (timers.js:263:5) at Timer.processTimers (timers.js:223:10) 2020-02-20 17:36:51.328 - info: zigbee.0 (2174) Try to reconnect. 1 attempts left 2020-02-20 17:36:51.328 - info: zigbee.0 (2174) Starting Zigbee... 2020-02-20 17:36:51.392 - error: zigbee.0 (2174) Failed to start Zigbee 2020-02-20 17:36:51.393 - error: zigbee.0 (2174) Error: Error while opening serialport 'Error: Error Resource temporarily unavailable Cannot lock port' at Znp. (/opt/iobroker/node_modules/zigbee-herdsman/dist/adapter/z-stack/znp/znp.js:113:32) at Generator.next () at /opt/iobroker/node_modules/zigbee-herdsman/dist/adapter/z-stack/znp/znp.js:8:71 at new Promise () at __awaiter (/opt/iobroker/node_modules/zigbee-herdsman/dist/adapter/z-stack/znp/znp.js:4:12) at SerialPort.serialPort.open (/opt/iobroker/node_modules/zigbee-herdsman/dist/adapter/z-stack/znp/znp.js:111:49) at SerialPort._error (/opt/iobroker/node_modules/@serialport/stream/lib/index.js:198:14) at binding.open.then.err (/opt/iobroker/node_modules/@serialport/stream/lib/index.js:242:12) 2020-02-20 17:38:22.089 - info: pushover.0 (936) Send pushover notification: {"message":"Vanessa zu Hause angekommen um 2020-02-20@17:38:22","sound":"none","title":"Vanessa@Home (BtT)","device":"Handy-Annett","priority":"0"} 2020-02-20 17:39:13.212 - info: tankerkoenig.0 (1416) Reading data from tankerkoenig ... 2020-02-20 17:39:47.890 - info: javascript.0 (497) script.js.common.Heimnetz.Wassertank_Fuellstand: Abweichung: 0 2020-02-20 17:40:00.009 - info: host.iobroker-01 instance system.adapter.weatherunderground.0 started with pid 2541 2020-02-20 17:40:04.017 - info: host.iobroker-01 instance system.adapter.dwd.0 started with pid 2556 2020-02-20 17:40:04.996 - info: host.iobroker-01 instance system.adapter.weatherunderground.0 terminated with code 0 (NO_ERROR) 2020-02-20 17:40:13.717 - info: host.iobroker-01 instance system.adapter.dwd.0 terminated with code 0 (NO_ERROR) 2020-02-20 17:42:11.398 - info: host.iobroker-01 stopInstance system.adapter.zigbee.0 (force=false, process=true) 2020-02-20 17:42:11.398 - info: host.iobroker-01 stopInstance system.adapter.zigbee.0 send kill signal 2020-02-20 17:42:11.400 - info: zigbee.0 (2174) Got terminate signal TERMINATE_YOURSELF 2020-02-20 17:42:11.401 - info: zigbee.0 (2174) cleaned everything up... 2020-02-20 17:42:11.403 - info: zigbee.0 (2174) Zigbee: disabling joining new devices. 2020-02-20 17:42:11.404 - error: zigbee.0 (2174) Failed to stop zigbee (TypeError: Cannot read property 'getEntries' of null at Function.loadFromDatabaseIfNecessary (/opt/iobroker/node_modules/zigbee-herdsman/dist/controller/model/group.js:64:55) at Function.all (/opt/iobroker/node_modules/zigbee-herdsman/dist/controller/model/group.js:76:15) at Controller. (/opt/iobroker/node_modules/zigbee-herdsman/dist/controller/controller.js:173:49) at Generator.next () at /opt/iobroker/node_modules/zigbee-herdsman/dist/controller/controller.js:8:71 at new Promise () at __awaiter (/opt/iobroker/node_modules/zigbee-herdsman/dist/controller/controller.js:4:12) at Controller.stop (/opt/iobroker/node_modules/zigbee-herdsman/dist/controller/controller.js:169:16) at ZigbeeController.stop (/opt/iobroker/node_modules/iobroker.zigbee/lib/zigbeecontroller.js:297:33) at process._tickCallback (internal/process/next_tick.js:68:7)) 2020-02-20 17:42:11.404 - info: zigbee.0 (2174) terminating 2020-02-20 17:42:11.404 - info: zigbee.0 (2174) Terminated (START_IMMEDIATELY_AFTER_STOP): Without reason 2020-02-20 17:42:11.937 - error: host.iobroker-01 Caught by controller[0]: (node:2174) UnhandledPromiseRejectionWarning: TypeError: Cannot read property 'getEntries' of null 2020-02-20 17:42:11.937 - error: host.iobroker-01 Caught by controller[0]: at Function.loadFromDatabaseIfNecessary (/opt/iobroker/node_modules/zigbee-herdsman/dist/controller/model/device.js:135:55) 2020-02-20 17:42:11.937 - error: host.iobroker-01 Caught by controller[0]: at Function.all (/opt/iobroker/node_modules/zigbee-herdsman/dist/controller/model/device.js:155:16) 2020-02-20 17:42:11.937 - error: host.iobroker-01 Caught by controller[0]: at Controller.getDevices (/opt/iobroker/node_modules/zigbee-herdsman/dist/controller/controller.js:218:31) 2020-02-20 17:42:11.938 - error: host.iobroker-01 Caught by controller[0]: at ZigbeeController.getClients (/opt/iobroker/node_modules/iobroker.zigbee/lib/zigbeecontroller.js:195:49) 2020-02-20 17:42:11.938 - error: host.iobroker-01 Caught by controller[0]: at DeviceAvailability.stop (/opt/iobroker/node_modules/iobroker.zigbee/lib/zbDeviceAvailability.js:123:43) 2020-02-20 17:42:11.938 - error: host.iobroker-01 Caught by controller[0]: at ZigbeeController.callExtensionMethod (/opt/iobroker/node_modules/iobroker.zigbee/lib/zigbeecontroller.js:181:42) 2020-02-20 17:42:11.938 - error: host.iobroker-01 Caught by controller[0]: at ZigbeeController.stop (/opt/iobroker/node_modules/iobroker.zigbee/lib/zigbeecontroller.js:293:20) 2020-02-20 17:42:11.938 - error: host.iobroker-01 Caught by controller[0]: at Zigbee.onUnload (/opt/iobroker/node_modules/iobroker.zigbee/main.js:317:41) 2020-02-20 17:42:11.938 - error: host.iobroker-01 Caught by controller[0]: at Zigbee.emit (events.js:198:13) 2020-02-20 17:42:11.938 - error: host.iobroker-01 Caught by controller[0]: at stop (/opt/iobroker/node_modules/iobroker.js-controller/lib/adapter.js:7226:22) 2020-02-20 17:42:11.938 - error: host.iobroker-01 Caught by controller[1]: (node:2174) UnhandledPromiseRejectionWarning: Unhandled promise rejection. This error originated either by throwing inside of an async function without a catch block, or by rejecting a promise which was not handled with .catch(). (rejection id: 2) 2020-02-20 17:42:11.938 - error: host.iobroker-01 Caught by controller[1]: (node:2174) [DEP0018] DeprecationWarning: Unhandled promise rejections are deprecated. In the future, promise rejections that are not handled will terminate the Node.js process with a non-zero exit code. 2020-02-20 17:42:11.938 - info: host.iobroker-01 instance system.adapter.zigbee.0 terminated with code 156 (156) 2020-02-20 17:42:13.905 - info: host.iobroker-01 instance system.adapter.zigbee.0 started with pid 2731 2020-02-20 17:42:14.277 - debug: zigbee.0 (2731) Redis Objects: Use Redis connection: 127.0.0.1:9001 2020-02-20 17:42:14.291 - debug: zigbee.0 (2731) Objects client ready ... initialize now 2020-02-20 17:42:14.292 - debug: zigbee.0 (2731) Objects create System PubSub Client 2020-02-20 17:42:14.293 - debug: zigbee.0 (2731) Objects create User PubSub Client 2020-02-20 17:42:14.293 - debug: zigbee.0 (2731) Objects client initialize lua scripts 2020-02-20 17:42:14.300 - debug: zigbee.0 (2731) Objects connected to redis: 127.0.0.1:9001 2020-02-20 17:42:14.302 - debug: zigbee.0 (2731) objectDB connected 2020-02-20 17:42:14.303 - debug: zigbee.0 (2731) Redis States: Use Redis connection: 127.0.0.1:9000 2020-02-20 17:42:14.307 - debug: zigbee.0 (2731) States create User PubSub Client 2020-02-20 17:42:14.308 - debug: zigbee.0 (2731) States create System PubSub Client 2020-02-20 17:42:14.313 - debug: zigbee.0 (2731) States connected to redis: 127.0.0.1:9000 2020-02-20 17:42:14.313 - debug: zigbee.0 (2731) statesDB connected 2020-02-20 17:42:15.245 - info: zigbee.0 (2731) starting. Version 1.0.3 in /opt/iobroker/node_modules/iobroker.zigbee, node: v10.19.0 2020-02-20 17:42:15.257 - info: zigbee.0 (2731) Starting Zigbee... 2020-02-20 17:42:15.258 - debug: zigbee.0 (2731) Starting zigbee-herdsman... 2020-02-20 17:42:17.107 - debug: zigbee.0 (2731) system.adapter.admin.0: logging true 2020-02-20 17:42:41.069 - debug: zigbee.0 (2731) zigbee-herdsman started 2020-02-20 17:42:41.069 - info: zigbee.0 (2731) Coordinator firmware version: {"type":"zStack12","meta":{"transportrev":2,"product":0,"majorrel":2,"minorrel":0,"maintrel":0,"revision":""}} 2020-02-20 17:42:41.075 - debug: zigbee.0 (2731) Zigbee network parameters: {"panID":6754,"extendedPanID":"0xdddddddddddddddd","channel":11} 2020-02-20 17:42:41.076 - info: zigbee.0 (2731) Disable LED 2020-02-20 17:42:41.081 - info: zigbee.0 (2731) --> transmitPower : normal 2020-02-20 17:42:41.087 - debug: zigbee.0 (2731) Publish available for 0x00158d0003499ad7 = true 2020-02-20 17:42:41.088 - debug: zigbee.0 (2731) Publish available for 0x00158d00036d347a = true 2020-02-20 17:42:41.088 - debug: zigbee.0 (2731) Publish available for 0x00158d0002e99611 = true 2020-02-20 17:42:41.088 - debug: zigbee.0 (2731) Publish available for 0x00158d0002ea75fd = true 2020-02-20 17:42:41.089 - debug: zigbee.0 (2731) Publish available for 0x00158d0003499a1b = true 2020-02-20 17:42:41.089 - debug: zigbee.0 (2731) Publish available for 0x84182600000fc87e = true 2020-02-20 17:42:41.089 - debug: zigbee.0 (2731) Publish available for 0x00158d000309a256 = true 2020-02-20 17:42:41.090 - info: zigbee.0 (2731) Currently 7 devices are joined: 2020-02-20 17:42:41.090 - debug: zigbee.0 (2731) shouldConfigure? 0x00158d0003499ad7 lumi.weather 2020-02-20 17:42:41.090 - debug: zigbee.0 (2731) shouldConfigure? 0x00158d00036d347a lumi.weather 2020-02-20 17:42:41.090 - debug: zigbee.0 (2731) shouldConfigure? 0x00158d0002e99611 lumi.weather 2020-02-20 17:42:41.090 - debug: zigbee.0 (2731) shouldConfigure? 0x00158d0002ea75fd lumi.weather 2020-02-20 17:42:41.090 - debug: zigbee.0 (2731) shouldConfigure? 0x00158d0003499a1b lumi.weather 2020-02-20 17:42:41.090 - debug: zigbee.0 (2731) shouldConfigure? 0x84182600000fc87e Plug 01 2020-02-20 17:42:41.091 - debug: zigbee.0 (2731) shouldConfigure? 0x00158d000309a256 lumi.weather 2020-02-20 17:42:41.091 - debug: zigbee.0 (2731) New device event: {"type":"device","device":{"ID":2,"_type":"EndDevice","_ieeeAddr":"0x00158d0003499ad7","_networkAddress":44062,"_manufacturerID":4151,"_endpoints":[{"ID":1,"profileID":260,"deviceID":24321,"inputClusters":[0,3,65535,1026,1027,1029],"outputClusters":[0,4,65535],"deviceNetworkAddress":44062,"deviceIeeeAddress":"0x00158d0003499ad7","clusters":{"msTemperatureMeasurement":{"attributes":{"measuredValue":2262}},"msRelativeHumidity":{"attributes":{"measuredValue":4004}},"msPressureMeasurement":{"attributes":{"16":9963,"20":-1,"measuredValue":996}},"genBasic":{"attributes":{"65281":{"1":2995,"4":5032,"5":2,"6":[1,16777218],"10":0,"100":2269,"101":4034,"102":99693},"modelId":"lumi.weather","manufacturerName":"LUMI","powerSource":3,"zclVersion":1,"appVersion":3,"stackVersion":2,"hwVersion":30,"dateCode":"20161129","swBuildId":"3000-0001"}}},"_binds":[]}],"_manufacturerName":"LUMI","_powerSource":"Battery","_modelID":"lumi.weather","_applicationVersion":3,"_stackVersion":2,"_zclVersion":1,"_hardwareVersion":30,"_dateCode":"20161129","_softwareBuildID":"3000-0001","_interviewCompleted":true,"_interviewing":false,"meta":{},"_lastSeen":1582211158629},"mapped":{"zigbeeModel":["lumi.weather"],"model":"WSDCGQ11LM","vendor":"Xiaomi","description":"Aqara temperature, humidity and pressure sensor","supports":"temperature, humidity and pressure","fromZigbee":[{"cluster":"genBasic","type":["attributeReport","readResponse"]},{"cluster":"msTemperatureMeasurement","type":["attributeReport","readResponse"]},{"cluster":"msRelativeHumidity","type":["attributeReport","readResponse"]},{"cluster":"msPressureMeasurement","type":["attributeReport","readResponse"]},{"cluster":"genBasic","type":["attributeReport","readResponse"]}],"toZigbee":[]},"name":"0x00158d0003499ad7"} 2020-02-20 17:42:41.091 - info: zigbee.0 (2731) 0x00158d0003499ad7 (addr 44062): WSDCGQ11LM - Xiaomi Aqara temperature, humidity and pressure sensor (EndDevice) 2020-02-20 17:42:41.092 - debug: zigbee.0 (2731) New device event: {"type":"device","device":{"ID":3,"_type":"EndDevice","_ieeeAddr":"0x00158d00036d347a","_networkAddress":49623,"_manufacturerID":4151,"_endpoints":[{"ID":1,"profileID":260,"deviceID":24321,"inputClusters":[0,3,65535,1026,1027,1029],"outputClusters":[0,4,65535],"deviceNetworkAddress":49623,"deviceIeeeAddress":"0x00158d00036d347a","clusters":{"msTemperatureMeasurement":{"attributes":{"measuredValue":2274}},"msRelativeHumidity":{"attributes":{"measuredValue":3780}},"msPressureMeasurement":{"attributes":{"16":9948,"20":-1,"measuredValue":994}},"genBasic":{"attributes":{"65281":{"1":2995,"4":5032,"5":6,"6":[0,1],"10":0,"100":2278,"101":3831,"102":99506},"modelId":"lumi.weather","manufacturerName":"LUMI"}}},"_binds":[]}],"_manufacturerName":"LUMI","_powerSource":"Battery","_modelID":"lumi.weather","_applicationVersion":3,"_interviewCompleted":true,"_interviewing":false,"meta":{},"_lastSeen":1582215718787},"mapped":{"zigbeeModel":["lumi.weather"],"model":"WSDCGQ11LM","vendor":"Xiaomi","description":"Aqara temperature, humidity and pressure sensor","supports":"temperature, humidity and pressure","fromZigbee":[{"cluster":"genBasic","type":["attributeReport","readResponse"]},{"cluster":"msTemperatureMeasurement","type":["attributeReport","readResponse"]},{"cluster":"msRelativeHumidity","type":["attributeReport","readResponse"]},{"cluster":"msPressureMeasurement","type":["attributeReport","readResponse"]},{"cluster":"genBasic","type":["attributeReport","readResponse"]}],"toZigbee":[]},"name":"0x00158d00036d347a"} 2020-02-20 17:42:41.092 - info: zigbee.0 (2731) 0x00158d00036d347a (addr 49623): WSDCGQ11LM - Xiaomi Aqara temperature, humidity and pressure sensor (EndDevice) 2020-02-20 17:42:41.092 - debug: zigbee.0 (2731) New device event: {"type":"device","device":{"ID":4,"_type":"EndDevice","_ieeeAddr":"0x00158d0002e99611","_networkAddress":62904,"_manufacturerID":4151,"_endpoints":[{"ID":1,"profileID":260,"deviceID":24321,"inputClusters":[0,3,65535,1026,1027,1029],"outputClusters":[0,4,65535],"deviceNetworkAddress":62904,"deviceIeeeAddress":"0x00158d0002e99611","clusters":{"msTemperatureMeasurement":{"attributes":{"measuredValue":737}},"msRelativeHumidity":{"attributes":{"measuredValue":7709}},"msPressureMeasurement":{"attributes":{"16":9953,"20":-1,"measuredValue":995}},"genBasic":{"attributes":{"65281":{"1":2945,"4":5032,"5":23,"6":[0,1],"10":0,"100":741,"101":7723,"102":99554},"modelId":"lumi.weather","manufacturerName":"LUMI","powerSource":3,"zclVersion":1,"appVersion":3,"stackVersion":2}}},"_binds":[]}],"_manufacturerName":"LUMI","_powerSource":"Battery","_modelID":"lumi.weather","_applicationVersion":3,"_stackVersion":2,"_zclVersion":1,"_interviewCompleted":true,"_interviewing":false,"meta":{},"_lastSeen":1582215439055},"mapped":{"zigbeeModel":["lumi.weather"],"model":"WSDCGQ11LM","vendor":"Xiaomi","description":"Aqara temperature, humidity and pressure sensor","supports":"temperature, humidity and pressure","fromZigbee":[{"cluster":"genBasic","type":["attributeReport","readResponse"]},{"cluster":"msTemperatureMeasurement","type":["attributeReport","readResponse"]},{"cluster":"msRelativeHumidity","type":["attributeReport","readResponse"]},{"cluster":"msPressureMeasurement","type":["attributeReport","readResponse"]},{"cluster":"genBasic","type":["attributeReport","readResponse"]}],"toZigbee":[]},"name":"0x00158d0002e99611"} 2020-02-20 17:42:41.092 - info: zigbee.0 (2731) 0x00158d0002e99611 (addr 62904): WSDCGQ11LM - Xiaomi Aqara temperature, humidity and pressure sensor (EndDevice) 2020-02-20 17:42:41.093 - debug: zigbee.0 (2731) New device event: {"type":"device","device":{"ID":5,"_type":"EndDevice","_ieeeAddr":"0x00158d0002ea75fd","_networkAddress":9722,"_manufacturerID":4151,"_endpoints":[{"ID":1,"profileID":260,"deviceID":24321,"inputClusters":[0,3,65535,1026,1027,1029],"outputClusters":[0,4,65535],"deviceNetworkAddress":9722,"deviceIeeeAddress":"0x00158d0002ea75fd","clusters":{"msTemperatureMeasurement":{"attributes":{"measuredValue":864}},"msRelativeHumidity":{"attributes":{"measuredValue":6987}},"msPressureMeasurement":{"attributes":{"16":9950,"20":-1,"measuredValue":995}},"genBasic":{"attributes":{"65281":{"1":2955,"4":5032,"5":43,"6":[0,1],"10":0,"100":974,"101":6662,"102":99582},"modelId":"lumi.weather","manufacturerName":"LUMI","powerSource":3,"zclVersion":1}}},"_binds":[]}],"_manufacturerName":"LUMI","_powerSource":"Battery","_modelID":"lumi.weather","_applicationVersion":3,"_zclVersion":1,"_interviewCompleted":true,"_interviewing":false,"meta":{},"_lastSeen":1582215732064},"mapped":{"zigbeeModel":["lumi.weather"],"model":"WSDCGQ11LM","vendor":"Xiaomi","description":"Aqara temperature, humidity and pressure sensor","supports":"temperature, humidity and pressure","fromZigbee":[{"cluster":"genBasic","type":["attributeReport","readResponse"]},{"cluster":"msTemperatureMeasurement","type":["attributeReport","readResponse"]},{"cluster":"msRelativeHumidity","type":["attributeReport","readResponse"]},{"cluster":"msPressureMeasurement","type":["attributeReport","readResponse"]},{"cluster":"genBasic","type":["attributeReport","readResponse"]}],"toZigbee":[]},"name":"0x00158d0002ea75fd"} 2020-02-20 17:42:41.093 - info: zigbee.0 (2731) 0x00158d0002ea75fd (addr 9722): WSDCGQ11LM - Xiaomi Aqara temperature, humidity and pressure sensor (EndDevice) 2020-02-20 17:42:41.093 - debug: zigbee.0 (2731) New device event: {"type":"device","device":{"ID":6,"_type":"EndDevice","_ieeeAddr":"0x00158d0003499a1b","_networkAddress":16023,"_manufacturerID":4151,"_endpoints":[{"ID":1,"profileID":260,"deviceID":24321,"inputClusters":[0,3,65535,1026,1027,1029],"outputClusters":[0,4,65535],"deviceNetworkAddress":16023,"deviceIeeeAddress":"0x00158d0003499a1b","clusters":{"msTemperatureMeasurement":{"attributes":{"measuredValue":1971}},"msRelativeHumidity":{"attributes":{"measuredValue":4519}},"msPressureMeasurement":{"attributes":{"16":9946,"20":-1,"measuredValue":994}},"genBasic":{"attributes":{"65281":{"1":2965,"4":5032,"5":6,"6":[0,1],"10":0,"100":1973,"101":4521,"102":99462},"modelId":"lumi.weather","manufacturerName":"LUMI","powerSource":3,"zclVersion":1,"appVersion":3,"stackVersion":2,"hwVersion":30,"dateCode":"20161129","swBuildId":"3000-0001"}}},"_binds":[]}],"_manufacturerName":"LUMI","_powerSource":"Battery","_modelID":"lumi.weather","_applicationVersion":3,"_stackVersion":2,"_zclVersion":1,"_hardwareVersion":30,"_dateCode":"20161129","_softwareBuildID":"3000-0001","_interviewCompleted":true,"_interviewing":false,"meta":{},"_lastSeen":1582215741312},"mapped":{"zigbeeModel":["lumi.weather"],"model":"WSDCGQ11LM","vendor":"Xiaomi","description":"Aqara temperature, humidity and pressure sensor","supports":"temperature, humidity and pressure","fromZigbee":[{"cluster":"genBasic","type":["attributeReport","readResponse"]},{"cluster":"msTemperatureMeasurement","type":["attributeReport","readResponse"]},{"cluster":"msRelativeHumidity","type":["attributeReport","readResponse"]},{"cluster":"msPressureMeasurement","type":["attributeReport","readResponse"]},{"cluster":"genBasic","type":["attributeReport","readResponse"]}],"toZigbee":[]},"name":"0x00158d0003499a1b"} 2020-02-20 17:42:41.093 - info: zigbee.0 (2731) 0x00158d0003499a1b (addr 16023): WSDCGQ11LM - Xiaomi Aqara temperature, humidity and pressure sensor (EndDevice) 2020-02-20 17:42:41.093 - debug: zigbee.0 (2731) New device event: {"type":"device","device":{"ID":7,"_type":"Router","_ieeeAddr":"0x84182600000fc87e","_networkAddress":17102,"_manufacturerID":48042,"_endpoints":[{"ID":3,"profileID":49246,"deviceID":16,"inputClusters":[4096,0,3,4,5,6,2820,64527],"outputClusters":[25],"deviceNetworkAddress":17102,"deviceIeeeAddress":"0x84182600000fc87e","clusters":{"genBasic":{"attributes":{"modelId":"Plug 01","manufacturerName":"OSRAM","powerSource":1,"zclVersion":1,"appVersion":12,"stackVersion":2,"hwVersion":1,"dateCode":"20140331DEOS****","swBuildId":"V1.04.12"}},"genOnOff":{"attributes":{"onOff":0}}},"_binds":[{"cluster":6,"type":"endpoint","deviceIeeeAddress":"0x00124b0018e1f888","endpointID":12}]}],"_manufacturerName":"OSRAM","_powerSource":"Mains (single phase)","_modelID":"Plug 01","_applicationVersion":12,"_stackVersion":2,"_zclVersion":1,"_hardwareVersion":1,"_dateCode":"20140331DEOS****","_softwareBuildID":"V1.04.12","_interviewCompleted":true,"_interviewing":false,"meta":{"configured":1},"_lastSeen":1582215737149},"mapped":{"zigbeeModel":["Plug 01"],"model":"AB3257001NJ","description":"Smart+ plug","supports":"on/off","vendor":"OSRAM","fromZigbee":[{"cluster":"genOnOff","type":["attributeReport","readResponse"]}],"toZigbee":[{"key":["state"]}],"meta":{"configureKey":1}},"name":"0x84182600000fc87e"} 2020-02-20 17:42:41.094 - info: zigbee.0 (2731) 0x84182600000fc87e (addr 17102): AB3257001NJ - OSRAM Smart+ plug (Router) 2020-02-20 17:42:41.094 - debug: zigbee.0 (2731) New device event: {"type":"device","device":{"ID":8,"_type":"EndDevice","_ieeeAddr":"0x00158d000309a256","_networkAddress":2947,"_manufacturerID":4151,"_endpoints":[{"ID":1,"inputClusters":[],"outputClusters":[],"deviceNetworkAddress":2947,"deviceIeeeAddress":"0x00158d000309a256","clusters":{"genBasic":{"attributes":{"65281":{"1":2975,"4":5032,"5":5,"6":[0,262145],"10":17102,"100":2243,"101":3943,"102":99773},"modelId":"lumi.weather","appVersion":3}},"msTemperatureMeasurement":{"attributes":{"measuredValue":2259}},"msPressureMeasurement":{"attributes":{"16":9958,"20":-1,"measuredValue":995}},"msRelativeHumidity":{"attributes":{"measuredValue":3878}}},"_binds":[]}],"_manufacturerName":"LUMI","_powerSource":"Battery","_modelID":"lumi.weather","_applicationVersion":3,"_interviewCompleted":true,"_interviewing":false,"meta":{},"_lastSeen":1582215582949},"mapped":{"zigbeeModel":["lumi.weather"],"model":"WSDCGQ11LM","vendor":"Xiaomi","description":"Aqara temperature, humidity and pressure sensor","supports":"temperature, humidity and pressure","fromZigbee":[{"cluster":"genBasic","type":["attributeReport","readResponse"]},{"cluster":"msTemperatureMeasurement","type":["attributeReport","readResponse"]},{"cluster":"msRelativeHumidity","type":["attributeReport","readResponse"]},{"cluster":"msPressureMeasurement","type":["attributeReport","readResponse"]},{"cluster":"genBasic","type":["attributeReport","readResponse"]}],"toZigbee":[]},"name":"0x00158d000309a256"} 2020-02-20 17:42:41.094 - info: zigbee.0 (2731) 0x00158d000309a256 (addr 2947): WSDCGQ11LM - Xiaomi Aqara temperature, humidity and pressure sensor (EndDevice) 2020-02-20 17:42:41.094 - info: zigbee.0 (2731) Zigbee started 2020-02-20 17:42:59.694 - debug: zigbee.0 (2731) system.adapter.admin.0: logging false 2020-02-20 17:43:34.078 - debug: zigbee.0 (2731) system.adapter.admin.0: logging true -
@steimi
Die Fehlermeldung deutet darauf hin das die serielle Schnittstelle nicht geöffnet werden kann. Es ist also zu prüfen:- ist der Stick sauber an die vom weitergereicht
- hat der Nutzer iobroker schreib und leserechte auf den seriellen Port ?
A.
-
@Asgothian das hatte ich auch gesehen. Das funktioniert aber nach einem Neustart der Instanz. Ich vermute daher eher ein Timing-Problem beim Start der VM und Start des ioBroker bzw der Instanz des Adapters. Wie gesagt reicht ja meist ein Neustart der Instanz. Teilweise muss in der Konfiguartion der Instanz einfach nochmal der /dev/ttyACM0 im Dropdown ausgewählt werden und das Speichern+Beenden in der Konfig und der Adaper startet.
-
@steimi ich denke dann dauert es einfach zu lange bis proxmox die serielle Schnittstelle weiter reicht. Ggf. Kannst du den Start des iobroker bei einem Neustart verzögern ?
A.
-
Okay, wäre ein Versuch wert. Wie mache ich das?
-
@Asgothian said in Zigbee adapter nach upgrade gelb:
ich denke dann dauert es einfach zu lange bis proxmox die serielle Schnittstelle weiter reicht
Komisch. Ich hab IOBroker mit Zigbee 1.0.3 Adapter in einem Proxmox Container am laufen, und hab überhaupt keine Timing-Probleme beim starten von IOBroker oder des Containers ,,,
-
mein Zigbee-Adapter lief die letzte Zeit stabil (auch nach Updates auf die 1.1.1). Heute habe ich dann den js-Controller von der 3.0.16 auf die 3.0.18 aktualisiert. danach startete der Adapter nicht mehr - Meldung: need pairing first. Habe daraufhin die ioBroker-VM in Proxmox 2mal neu gestartet und in den Adapter-Einstellungen von Zigbee den Port nochmal eingestellt und gespeichert. Danach funktioniert es nun wieder. Nachfolgend die Logs von heute (wieder der 'can not lock port-Error).
zigbee.0 2020-04-24 06:01:58.871 info (4581) Zigbee started zigbee.0 2020-04-24 06:01:58.871 info (4581) 0x00158d0003499a1b (addr 55984): WSDCGQ11LM - Xiaomi Aqara temperature, humidity and pressure sensor (EndDevice) zigbee.0 2020-04-24 06:01:58.870 info (4581) 0x84182600000fc87e (addr 41677): AB3257001NJ - OSRAM Smart+ plug (Router) zigbee.0 2020-04-24 06:01:58.870 info (4581) 0x00158d0002e99611 (addr 41990): WSDCGQ11LM - Xiaomi Aqara temperature, humidity and pressure sensor (EndDevice) zigbee.0 2020-04-24 06:01:58.869 info (4581) 0x00158d0002ea75fd (addr 22009): WSDCGQ11LM - Xiaomi Aqara temperature, humidity and pressure sensor (EndDevice) zigbee.0 2020-04-24 06:01:58.868 info (4581) 0x00158d000309a256 (addr 12940): WSDCGQ11LM - Xiaomi Aqara temperature, humidity and pressure sensor (EndDevice) zigbee.0 2020-04-24 06:01:58.868 info (4581) 0x00158d00036d347a (addr 54068): WSDCGQ11LM - Xiaomi Aqara temperature, humidity and pressure sensor (EndDevice) zigbee.0 2020-04-24 06:01:58.867 info (4581) 0x00158d0003499ad7 (addr 52718): WSDCGQ11LM - Xiaomi Aqara temperature, humidity and pressure sensor (EndDevice) zigbee.0 2020-04-24 06:01:58.864 info (4581) Currently 7 devices are joined: zigbee.0 2020-04-24 06:01:58.860 info (4581) --> transmitPower : normal zigbee.0 2020-04-24 06:01:58.854 info (4581) Coordinator firmware version: {"type":"zStack30x","meta":{"transportrev":2,"product":2,"majorrel":2,"minorrel":7,"maintrel":2,"revision":20200327}} zigbee.0 2020-04-24 06:01:57.645 info (4581) Starting Zigbee... zigbee.0 2020-04-24 06:01:57.631 info (4581) starting. Version 1.1.1 in /opt/iobroker/node_modules/iobroker.zigbee, node: v12.16.2, js-controller: 3.0.18 zigbee.0 2020-04-24 06:01:53.330 error at stop (/opt/iobroker/node_modules/iobroker.js-controller/lib/adapter.js:8189:22) zigbee.0 2020-04-24 06:01:53.330 error at Zigbee.emit (events.js:310:20) zigbee.0 2020-04-24 06:01:53.330 error at Zigbee.onUnload (/opt/iobroker/node_modules/iobroker.zigbee/main.js:320:41) zigbee.0 2020-04-24 06:01:53.330 error at ZigbeeController.stop (/opt/iobroker/node_modules/iobroker.zigbee/lib/zigbeecontroller.js:303:20) zigbee.0 2020-04-24 06:01:53.330 error at ZigbeeController.callExtensionMethod (/opt/iobroker/node_modules/iobroker.zigbee/lib/zigbeecontroller.js:186:42) zigbee.0 2020-04-24 06:01:53.330 error at DeviceAvailability.stop (/opt/iobroker/node_modules/iobroker.zigbee/lib/zbDeviceAvailability.js:123:43) zigbee.0 2020-04-24 06:01:53.330 error at ZigbeeController.getClients (/opt/iobroker/node_modules/iobroker.zigbee/lib/zigbeecontroller.js:200:49) zigbee.0 2020-04-24 06:01:53.330 error at Controller.getDevices (/opt/iobroker/node_modules/zigbee-herdsman/dist/controller/controller.js:223:31) zigbee.0 2020-04-24 06:01:53.330 error at Function.all (/opt/iobroker/node_modules/zigbee-herdsman/dist/controller/model/device.js:220:16) zigbee.0 2020-04-24 06:01:53.330 error at Function.loadFromDatabaseIfNecessary (/opt/iobroker/node_modules/zigbee-herdsman/dist/controller/model/device.js:200:55) zigbee.0 2020-04-24 06:01:53.330 error (4531) TypeError: Cannot read property 'getEntries' of null zigbee.0 2020-04-24 06:01:53.330 error (4531) uncaught exception: Cannot read property 'getEntries' of null zigbee.0 2020-04-24 06:01:53.329 info (4531) Terminated (ADAPTER_REQUESTED_TERMINATION): Without reason zigbee.0 2020-04-24 06:01:53.329 info (4531) terminating zigbee.0 2020-04-24 06:01:53.329 error at processTicksAndRejections (internal/process/task_queues.js:97:5)) zigbee.0 2020-04-24 06:01:53.329 error at ZigbeeController.stop (/opt/iobroker/node_modules/iobroker.zigbee/lib/zigbeecontroller.js:307:33) zigbee.0 2020-04-24 06:01:53.329 error at Controller.stop (/opt/iobroker/node_modules/zigbee-herdsman/dist/controller/controller.js:174:16) zigbee.0 2020-04-24 06:01:53.329 error at __awaiter (/opt/iobroker/node_modules/zigbee-herdsman/dist/controller/controller.js:4:12) zigbee.0 2020-04-24 06:01:53.329 error at new Promise (<anonymous>) zigbee.0 2020-04-24 06:01:53.329 error at /opt/iobroker/node_modules/zigbee-herdsman/dist/controller/controller.js:8:71 zigbee.0 2020-04-24 06:01:53.329 error at Generator.next (<anonymous>) zigbee.0 2020-04-24 06:01:53.329 error at Controller.<anonymous> (/opt/iobroker/node_modules/zigbee-herdsman/dist/controller/controller.js:178:49) zigbee.0 2020-04-24 06:01:53.329 error at Function.all (/opt/iobroker/node_modules/zigbee-herdsman/dist/controller/model/group.js:76:15) zigbee.0 2020-04-24 06:01:53.329 error at Function.loadFromDatabaseIfNecessary (/opt/iobroker/node_modules/zigbee-herdsman/dist/controller/model/group.js:64:55) zigbee.0 2020-04-24 06:01:53.329 error (4531) Failed to stop zigbee (TypeError: Cannot read property 'getEntries' of null zigbee.0 2020-04-24 06:01:53.328 info (4531) Zigbee: disabling joining new devices. zigbee.0 2020-04-24 06:01:53.327 info (4531) cleaned everything up... zigbee.0 2020-04-24 06:01:53.326 info (4531) Got terminate signal TERMINATE_YOURSELF zigbee.0 2020-04-24 06:01:51.594 error at /opt/iobroker/node_modules/@serialport/stream/lib/index.js:242:12 zigbee.0 2020-04-24 06:01:51.594 error at SerialPort._error (/opt/iobroker/node_modules/@serialport/stream/lib/index.js:198:14) zigbee.0 2020-04-24 06:01:51.594 error at SerialPort.<anonymous> (/opt/iobroker/node_modules/zigbee-herdsman/dist/adapter/z-stack/znp/znp.js:111:49) zigbee.0 2020-04-24 06:01:51.594 error at __awaiter (/opt/iobroker/node_modules/zigbee-herdsman/dist/adapter/z-stack/znp/znp.js:4:12) zigbee.0 2020-04-24 06:01:51.594 error at new Promise (<anonymous>) zigbee.0 2020-04-24 06:01:51.594 error at /opt/iobroker/node_modules/zigbee-herdsman/dist/adapter/z-stack/znp/znp.js:8:71 zigbee.0 2020-04-24 06:01:51.594 error at Generator.next (<anonymous>) zigbee.0 2020-04-24 06:01:51.594 error at Znp.<anonymous> (/opt/iobroker/node_modules/zigbee-herdsman/dist/adapter/z-stack/znp/znp.js:113:32) zigbee.0 2020-04-24 06:01:51.594 error (4531) Error: Error while opening serialport 'Error: Error Resource temporarily unavailable Cannot lock port' zigbee.0 2020-04-24 06:01:51.593 error (4531) Failed to start Zigbee zigbee.0 2020-04-24 06:01:51.533 info (4531) Starting Zigbee... zigbee.0 2020-04-24 06:01:51.533 info (4531) Try to reconnect. 1 attempts left zigbee.0 2020-04-24 06:01:41.531 error at rejected (/opt/iobroker/node_modules/zigbee-herdsman/dist/adapter/z-stack/adapter/zStackAdapter.js:6:65) zigbee.0 2020-04-24 06:01:41.531 error at Generator.throw (<anonymous>) zigbee.0 2020-04-24 06:01:41.531 error at ZStackAdapter.<anonymous> (/opt/iobroker/node_modules/zigbee-herdsman/dist/adapter/z-stack/adapter/zStackAdapter.js:71:23) zigbee.0 2020-04-24 06:01:41.531 error (4531) Error: Failed to connect to the adapter (Error: SRSP - SYS - ping after 6000ms) zigbee.0 2020-04-24 06:01:41.531 error (4531) Failed to start Zigbee zigbee.0 2020-04-24 06:01:34.425 info (4531) Starting Zigbee... zigbee.0 2020-04-24 06:01:34.414 info (4531) starting. Version 1.1.1 in /opt/iobroker/node_modules/iobroker.zigbee, node: v12.16.2, js-controller: 3.0.18 -
Hallo zusammen,
ich bin auf JS-Controller 3.0.20 und habe erst seit kurzem (2 Tage?) folgende Fehlermeldungen im LOG
zigbee.0 2020-04-29 08:13:57.448 error (22760) Error: Timeout - 42681 - 3 - 5 - 0 - 1 after 10000ms at Timeout._onTimeout (/opt/iobroker/node_modules/iobroker.zigbee/node_modules/zigbee-herdsman/dist/utils/waitress.js:44:24) at lis zigbee.0 2020-04-29 08:13:57.447 error (22760) uncaught exception: Timeout - 42681 - 3 - 5 - 0 - 1 after 10000ms zigbee.0 2020-04-29 08:08:06.446 error at processTimers (internal/timers.js:492:7) zigbee.0 2020-04-29 08:08:06.446 error at listOnTimeout (internal/timers.js:549:17) zigbee.0 2020-04-29 08:08:06.446 error at Timeout._onTimeout (/opt/iobroker/node_modules/iobroker.zigbee/node_modules/zigbee-herdsman/dist/utils/waitress.js:44:24) zigbee.0 2020-04-29 08:08:06.446 error (10870) Error: Timeout - 1681 - 3 - 11 - 0 - 1 after 10000ms zigbee.0 2020-04-29 08:08:06.445 error (10870) uncaught exception: Timeout - 1681 - 3 - 11 - 0 - 1 after 10000ms zigbee.0 2020-04-29 07:57:16.183 error at rejected (/opt/iobroker/node_modules/iobroker.zigbee/node_modules/zigbee-herdsman/dist/controller/model/endpoint.js:6:65) zigbee.0 2020-04-29 07:57:16.183 error at Generator.throw (<anonymous>) zigbee.0 2020-04-29 07:57:16.183 error at Endpoint.<anonymous> (/opt/iobroker/node_modules/iobroker.zigbee/node_modules/zigbee-herdsman/dist/controller/model/endpoint.js:349:23) zigbee.0 2020-04-29 07:57:16.183 error (7451) Error on send command to 0x8418260000dad4e7. Error: Error: Command 0x8418260000dad4e7/3 genLevelCtrl.moveToLevelWithOnOff({"level":38,"transtime":0}, {"timeout":10000,"manufacturerCode":null," zigbee.0 2020-04-29 07:57:16.070 error at rejected (/opt/iobroker/node_modules/iobroker.zigbee/node_modules/zigbee-herdsman/dist/controller/model/endpoint.js:6:65) zigbee.0 2020-04-29 07:57:16.070 error at Generator.throw (<anonymous>) zigbee.0 2020-04-29 07:57:16.070 error at Endpoint.<anonymous> (/opt/iobroker/node_modules/iobroker.zigbee/node_modules/zigbee-herdsman/dist/controller/model/endpoint.js:349:23) zigbee.0 2020-04-29 07:57:16.070 error (7451) Error on send command to 0x8418260000000712. Error: Error: Command 0x8418260000000712/3 genLevelCtrl.moveToLevelWithOnOff({"level":38,"transtime":0}, {"timeout":10000,"manufacturerCode":null," zigbee.0 2020-04-29 07:57:15.863 error at processTimers (internal/timers.js:492:7) zigbee.0 2020-04-29 07:57:15.863 error at listOnTimeout (internal/timers.js:549:17) zigbee.0 2020-04-29 07:57:15.863 error at Timeout._onTimeout (/opt/iobroker/node_modules/iobroker.zigbee/node_modules/zigbee-herdsman/dist/utils/waitress.js:44:24) zigbee.0 2020-04-29 07:57:15.863 error (7451) Error: Timeout - 30525 - 3 - 3 - 8 - 11 after 10000ms zigbee.0 2020-04-29 07:57:15.862 error (7451) uncaught exception: Timeout - 30525 - 3 - 3 - 8 - 11 after 10000ms zigbee.0 2020-04-29 07:57:15.783 error at processTimers (internal/timers.js:492:7) zigbee.0 2020-04-29 07:57:15.783 error at listOnTimeout (internal/timers.js:549:17) zigbee.0 2020-04-29 07:57:15.783 error at Timeout._onTimeout (/opt/iobroker/node_modules/iobroker.zigbee/node_modules/zigbee-herdsman/dist/utils/waitress.js:44:24) zigbee.0 2020-04-29 07:57:15.783 error (7451) Error: Timeout - 1681 - 3 - 2 - 8 - 11 after 10000ms zigbee.0 2020-04-29 07:57:15.782 error (7451) uncaught exception: Timeout - 1681 - 3 - 2 - 8 - 11 after 10000msVielleicht ist auf die genutzte Firmware von Interesse:
zigbee.0 2020-04-29 08:14:31.999 info (29192) Coordinator firmware version: {"type":"zStack30x","meta":{"transportrev":2,"product":2,"majorrel":2,"minorrel":7,"maintrel":2,"revision":20190523}}Die sehen anders aus als die bisher gelieferten Logs. Jmd eine Idee, was ich machen muss? Ein Rebuild für den Adapter hab ich bereits gemacht...
Danke euch und vG, Thorsten -
@Kueppert
Eine kurze Frage:Funktioniert der Adapter trotz der Meldungen oder ist der Adapter gelb ?
A.
-
@Asgothian der Adapter war trotzdem grün. Ich hab aus Gewohnheit jetzt mal den Stick wieder gezogen im laufenden Betrieb und wieder dran gesteckt. Gerade ist erst mal wieder Ruhe im Karton. Ist mir nur aufgefallen, weil meine Lampen nicht mehr geschaltet haben...Netzwerk baut sich ja nach jedem Restart vom Adapter neu auf.
Danke dir und vG, Thorsten -
@Kueppert Nach den Meldungen gehe ich davon aus das es einen Timeout beim Senden oder Empfangen gibt. Insgesamt ist das Thema "timeout" und die daraus resultierenden Meldungen im Zigbee-Adapter noch ein weites Feld, es sind nicht alle Eventualitäten abgefangen, so das Fehlermeldungen ggf. bis zum ioBroker-Log durchlaufen obwohl sie eigentlich als behandelt intern abgefangen gehören.
Solange wie diese Meldungen die Folgenden Randbedingungen erfüllen würde ich mir erst einmal wenig sorgen machen.
- Der Adapter bleibt grün
- Es gibt keine offensichtlichen Funktionsausfälle (Lampen die nicht schalten, Sensoren die nicht Melden)
- Stehen im Zusammenhang mit "Timeout after 10000 ms" und "Error on send command to"
In diesem Zusammenhang gehe ich davon aus das ein Endgerät einen Befehl des Coordinators nicht quittiert hat, bzw. das die Quittierung am Coordinator nicht angekommen ist.
A.
-
Ich habe genau den gleichen Fehler:
zigbee.0 2020-04-29 16:06:40.370 error (4812) Error: Error while opening serialport 'Error: Error Resource temporarily unavailable Cannot lock port' at Znp.<anonymous> (/opt/iobroker/node_modules/zigbee-herdsman/dist/adapter/z-stack/zn zigbee.0 2020-04-29 16:06:40.369 error (4812) Failed to start Zigbee zigbee.0 2020-04-29 16:06:40.192 info (4812) Starting Zigbee... zigbee.0 2020-04-29 16:06:40.190 info (4812) Try to reconnect. 1 attempts left zigbee.0 2020-04-29 16:06:30.187 error (4812) Error: AREQ - ZDO - activeEpRsp after 10000ms at Timeout.object.timer.setTimeout [as _onTimeout] (/opt/iobroker/node_modules/zigbee-herdsman/dist/utils/waitress.js:44:24) at ontimeout ( zigbee.0 2020-04-29 16:06:30.185 error (4812) Failed to start Zigbee zigbee.0 2020-04-29 16:06:18.676 info (4812) Starting Zigbee... zigbee.0 2020-04-29 16:06:18.641 info (4812) starting. Version 1.1.1 in /opt/iobroker/node_modules/iobroker.zigbee, node: v10.18.1, js-controller: 3.0.20 zigbee.0 2020-04-29 16:05:45.850 info (4564) Terminated (NO_ERROR): Without reason zigbee.0 2020-04-29 16:05:45.848 info (4564) terminating zigbee.0 2020-04-29 16:05:45.341 info (4564) Zigbee: disabling joining new devices. zigbee.0 2020-04-29 16:05:45.338 info (4564) cleaned everything up... zigbee.0 2020-04-29 16:05:45.334 error at fulfilled (/opt/iobroker/node_modules/zigbee-herdsman/dist/adapter/z-stack/znp/znp.js:5:58) zigbee.0 2020-04-29 16:05:45.334 error at Generator.next (<anonymous>) zigbee.0 2020-04-29 16:05:45.334 error at Znp.<anonymous> (/opt/iobroker/node_modules/zigbee-herdsman/dist/adapter/z-stack/znp/znp.js:246:27) zigbee.0 2020-04-29 16:05:45.334 error (4564) Error: SREQ '--> AF - interPanCtl - {"cmd":1,"data":[18]}' failed with status '186' (expected '0') zigbee.0 2020-04-29 16:05:45.334 error (4564) uncaught exception: SREQ '--> AF - interPanCtl - {"cmd":1,"data":[18]}' failed with status '186' (expected '0') zigbee.0 2020-04-29 16:05:45.324 info (4564) Starting interview of '0x00158d00045c13ef' zigbee.0 2020-04-29 16:05:31.403 info (4564) Zigbee: allowing new devices to join.ich wollte ein neuen Gerät anlernen und dann ist es abgestürzt. Ich kann also keine neue Geräte anlernen
Stick raus, dann wieder rein und dann kann der Adapter neu gestartet werden. Nur das Anlernen ist nicht mehr möglich....
Model: Intel(R) Celeron(R) CPU J3455 @ 1.50GHz, RAM: 7.64 GB, Node.js: v10.18.1, NPM: 6.13.4, Architecture: x64, Distribution: Debian GNU/Linux, Platform: linux, JS-Controller (1): 3.0.20, Admin: 4.1.1, Zigbee: 1.1.1
-
Hallo,
hab heute das gleiche Problem festgestellt. Wollte ein neues Gerät anlernen, und dann ging es los wie oben genannt. Habe auch den Stick entfernt, wieder ran und dann den Adapter wieder gestartet. Jetzt läuft es erstmal wieder. Einen weiteren Anlernversuch habe ich dann erstmal unterlassen. (Zigbee 1.1.1)
Gruß
Cray
