Zigbee Adapter und Conbee Unterstützung
-
@Plasmachef sagte in Zigbee Adapter und Conbee Unterstützung:
mit Raspbee II
Hier im Thread geht es um Zigbee Adapter und Conbee Unterstützung
-
@Glasfaser , die Docker-Conbee-Polizei
-
Hier ein Thread zb. Link Text
und gebe auch dein Zigbee Adapter Version an . -
@Glasfaser sorry, dachte, da der Adapter beides kann bin ich hier auch richtig...
"ioBroker adapter for Zigbee devices via TI cc2531/cc2530/cc26x2r/cc2538 and deCONZ ConBee/RaspBee"
-
@Glasfaser... so... habe für Samstag das Teil bestellt... sollte der Fehler wieder auftreten, was ich vermute, dann bin ich wieder da
-
@justr gut zu Lesen. Der Umzug von DeConz zum Zigbee wird mein UrlaubsProjekt
Ich habe ja die Hoffnung, dass die mit dem Stick verbundenen Geräte automatisch vom Zigbee-Adapter erkannt werden...?
Wenn nicht, wird das viel Arbeit.Naja, für uns SmartHome-Nerds liegt die Frusttolleranz ja höher
- nur nicht bei meiner besseren hälfte -
@c_hoch_b Viel Erfolg! Ich musste die Devices leider neu anlernen. Evtl. hatte ich aber zu viel rumprobiert und dabei die Config verloren. Allerdings verliere ich alle paar Tage (einmal beim Einrichten und dann noch einmal in den letzten 10 Tagen) die Verbindung zum Conbee ohne Info-, Warn- oder Fehlermeldung. Auch die Instanz bleibt grün. Nach einem Restart der Instanz läuft aber alles wieder. Wenn es weiterhin passiert, werde ich mir wohl ein kleines Restart-Skript schreiben, welches triggert, wenn einer der Timestamps für die "link_quality" der Devices seit mehr als einer Stunde nicht mehr aktualisiert wurde. Wenn es aber immer erst nach mehreren Tagen passiert, reicht auch ein Auto-Restart jede Nacht. Werde es weiter beobachten...
-
@justr danke für die Info und Hinweis! Dann verzweifle ich nicht gleich :).
Und es ist ja noch Beta, vlt. wird das Problem ja noch behoben...
-
@arteck sagte in Zigbee Adapter und Conbee Unterstützung:
@Schuko80 mit den schnippseln kann ich nix anfagen
stell mal bitte ordentliches LOG rein
vor allem was wann sich verabschiedet wenn du es nochvolziehen kannst
Da verabschiedet sich gar nichts, es läuft gar nicht erst:
- Conbee wird erkannt
- scannen nach Devices -> OK
- Device wird richtig erkannt -> zu 90% OK, sonst noch mal löschen und neu pairen -> OK
-Status in Objekte -> availabel = true - alles andere ist leer - Steuern einer Ikea Lampe geht, wenn ich state auf true setze.
Kachel in Zigbee zeigt keine Verbindung
Log wie folgt:
zigbee.0 2020-04-29 20:00:56.192 debug (2343) sendTo "getBinding" to system.adapter.admin.0 from system.adapter.zigbee.0 zigbee.0 2020-04-29 20:00:56.191 debug (2343) getBinding result: [] zigbee.0 2020-04-29 20:00:55.203 debug (2343) sendTo "getDevices" to system.adapter.admin.0 from system.adapter.zigbee.0 zigbee.0 2020-04-29 20:00:55.202 debug (2343) getDevices result: [{"type":"device","common":{"name":"TRADFRI bulb E27 WS clear 950lm","type":"TRADFRI bulb E27 WS clear 950lm","icon":"img/ikea_bulb_E27.png"},"native":{"id":"000b57fffe2289d7 zigbee.0 2020-04-29 20:00:55.196 debug (2343) sendTo "getBinding" to system.adapter.admin.0 from system.adapter.zigbee.0 zigbee.0 2020-04-29 20:00:55.195 debug (2343) getBinding result: [] zigbee.0 2020-04-29 20:00:54.766 debug (2343) sendTo "getDevices" to system.adapter.admin.0 from system.adapter.zigbee.0 zigbee.0 2020-04-29 20:00:54.766 debug (2343) getDevices result: [{"type":"device","common":{"name":"TRADFRI bulb E27 WS clear 950lm","type":"TRADFRI bulb E27 WS clear 950lm","icon":"img/ikea_bulb_E27.png"},"native":{"id":"000b57fffe2289d7 zigbee.0 2020-04-29 20:00:54.655 debug (2343) new device 0x000b57fffe2289d7 42472 TRADFRI bulb E27 WS clear 950lm zigbee.0 2020-04-29 20:00:54.650 debug (2343) New device event: {"type":"device","device":{"ID":3,"_type":"Router","_ieeeAddr":"0x000b57fffe2289d7","_networkAddress":42472,"_manufacturerID":4476,"_endpoints":[{"ID":1,"profileID":260,"devic zigbee.0 2020-04-29 20:00:54.648 info (2343) Device '0x000b57fffe2289d7' is supported, identified as: IKEA TRADFRI LED bulb E26/E27 950 lumen, dimmable, white spectrum, clear (LED1546G12) zigbee.0 2020-04-29 20:00:54.648 info (2343) Successfully interviewed '0x000b57fffe2289d7', device has succesfully been paired zigbee.0 2020-04-29 20:00:54.647 debug (2343) handleDeviceInterview. {"status":"successful","device":{"ID":3,"_type":"Router","_ieeeAddr":"0x000b57fffe2289d7","_networkAddress":42472,"_manufacturerID":4476,"_endpoints":[{"ID":1,"profileID" zigbee.0 2020-04-29 20:00:54.485 debug (2343) Type readResponse device {"type":"device","device":{"ID":3,"_type":"Router","_ieeeAddr":"0x000b57fffe2289d7","_networkAddress":42472,"_manufacturerID":4476,"_endpoints":[{"ID":1,"profileID":260 zigbee.0 2020-04-29 20:00:54.484 debug (2343) Received Zigbee message from '0x000b57fffe2289d7', type 'readResponse', cluster 'genBasic', data '{"swBuildId":"2.3.007"}' from endpoint 1 with groupID null zigbee.0 2020-04-29 20:00:54.483 debug (2343) handleMessage. {"type":"readResponse","device":{"ID":3,"_type":"Router","_ieeeAddr":"0x000b57fffe2289d7","_networkAddress":42472,"_manufacturerID":4476,"_endpoints":[{"ID":1,"profileID":260,"de zigbee.0 2020-04-29 20:00:54.342 debug (2343) Type readResponse device {"type":"device","device":{"ID":3,"_type":"Router","_ieeeAddr":"0x000b57fffe2289d7","_networkAddress":42472,"_manufacturerID":4476,"_endpoints":[{"ID":1,"profileID":260 zigbee.0 2020-04-29 20:00:54.341 debug (2343) Received Zigbee message from '0x000b57fffe2289d7', type 'readResponse', cluster 'genBasic', data '{"dateCode":"20190520"}' from endpoint 1 with groupID null zigbee.0 2020-04-29 20:00:54.339 debug (2343) handleMessage. {"type":"readResponse","device":{"ID":3,"_type":"Router","_ieeeAddr":"0x000b57fffe2289d7","_networkAddress":42472,"_manufacturerID":4476,"_endpoints":[{"ID":1,"profileID":260,"de zigbee.0 2020-04-29 20:00:54.183 debug (2343) Type readResponse device {"type":"device","device":{"ID":3,"_type":"Router","_ieeeAddr":"0x000b57fffe2289d7","_networkAddress":42472,"_manufacturerID":4476,"_endpoints":[{"ID":1,"profileID":260 zigbee.0 2020-04-29 20:00:54.182 debug (2343) Received Zigbee message from '0x000b57fffe2289d7', type 'readResponse', cluster 'genBasic', data '{"hwVersion":1}' from endpoint 1 with groupID null zigbee.0 2020-04-29 20:00:54.179 debug (2343) handleMessage. {"type":"readResponse","device":{"ID":3,"_type":"Router","_ieeeAddr":"0x000b57fffe2289d7","_networkAddress":42472,"_manufacturerID":4476,"_endpoints":[{"ID":1,"profileID":260,"de zigbee.0 2020-04-29 20:00:54.038 debug (2343) Type readResponse device {"type":"device","device":{"ID":3,"_type":"Router","_ieeeAddr":"0x000b57fffe2289d7","_networkAddress":42472,"_manufacturerID":4476,"_endpoints":[{"ID":1,"profileID":260 zigbee.0 2020-04-29 20:00:54.037 debug (2343) Received Zigbee message from '0x000b57fffe2289d7', type 'readResponse', cluster 'genBasic', data '{"stackVersion":98}' from endpoint 1 with groupID null zigbee.0 2020-04-29 20:00:54.035 debug (2343) handleMessage. {"type":"readResponse","device":{"ID":3,"_type":"Router","_ieeeAddr":"0x000b57fffe2289d7","_networkAddress":42472,"_manufacturerID":4476,"_endpoints":[{"ID":1,"profileID":260,"de zigbee.0 2020-04-29 20:00:53.877 debug (2343) Type readResponse device {"type":"device","device":{"ID":3,"_type":"Router","_ieeeAddr":"0x000b57fffe2289d7","_networkAddress":42472,"_manufacturerID":4476,"_endpoints":[{"ID":1,"profileID":260 zigbee.0 2020-04-29 20:00:53.877 debug (2343) Received Zigbee message from '0x000b57fffe2289d7', type 'readResponse', cluster 'genBasic', data '{"appVersion":33}' from endpoint 1 with groupID null zigbee.0 2020-04-29 20:00:53.875 debug (2343) handleMessage. {"type":"readResponse","device":{"ID":3,"_type":"Router","_ieeeAddr":"0x000b57fffe2289d7","_networkAddress":42472,"_manufacturerID":4476,"_endpoints":[{"ID":1,"profileID":260,"de zigbee.0 2020-04-29 20:00:53.735 debug (2343) Type readResponse device {"type":"device","device":{"ID":3,"_type":"Router","_ieeeAddr":"0x000b57fffe2289d7","_networkAddress":42472,"_manufacturerID":4476,"_endpoints":[{"ID":1,"profileID":260 zigbee.0 2020-04-29 20:00:53.734 debug (2343) Received Zigbee message from '0x000b57fffe2289d7', type 'readResponse', cluster 'genBasic', data '{"zclVersion":3}' from endpoint 1 with groupID null zigbee.0 2020-04-29 20:00:53.731 debug (2343) handleMessage. {"type":"readResponse","device":{"ID":3,"_type":"Router","_ieeeAddr":"0x000b57fffe2289d7","_networkAddress":42472,"_manufacturerID":4476,"_endpoints":[{"ID":1,"profileID":260,"de zigbee.0 2020-04-29 20:00:53.589 debug (2343) Type readResponse device {"type":"device","device":{"ID":3,"_type":"Router","_ieeeAddr":"0x000b57fffe2289d7","_networkAddress":42472,"_manufacturerID":4476,"_endpoints":[{"ID":1,"profileID":260 zigbee.0 2020-04-29 20:00:53.588 debug (2343) Received Zigbee message from '0x000b57fffe2289d7', type 'readResponse', cluster 'genBasic', data '{"powerSource":1}' from endpoint 1 with groupID null zigbee.0 2020-04-29 20:00:53.587 debug (2343) handleMessage. {"type":"readResponse","device":{"ID":3,"_type":"Router","_ieeeAddr":"0x000b57fffe2289d7","_networkAddress":42472,"_manufacturerID":4476,"_endpoints":[{"ID":1,"profileID":260,"de zigbee.0 2020-04-29 20:00:53.430 debug (2343) Type readResponse device {"type":"device","device":{"ID":3,"_type":"Router","_ieeeAddr":"0x000b57fffe2289d7","_networkAddress":42472,"_manufacturerID":4476,"_endpoints":[{"ID":1,"profileID":260 zigbee.0 2020-04-29 20:00:53.429 debug (2343) Received Zigbee message from '0x000b57fffe2289d7', type 'readResponse', cluster 'genBasic', data '{"manufacturerName":"IKEA of Sweden"}' from endpoint 1 with groupID null zigbee.0 2020-04-29 20:00:53.427 debug (2343) handleMessage. {"type":"readResponse","device":{"ID":3,"_type":"Router","_ieeeAddr":"0x000b57fffe2289d7","_networkAddress":42472,"_manufacturerID":4476,"_endpoints":[{"ID":1,"profileID":260,"de zigbee.0 2020-04-29 20:00:53.301 debug (2343) Wrong device 000b57fffe2289d7 null zigbee.0 2020-04-29 20:00:53.294 debug (2343) Publish available for 0x000b57fffe2289d7 = true zigbee.0 2020-04-29 20:00:53.291 debug (2343) Type readResponse device {"type":"device","device":{"ID":3,"_type":"Router","_ieeeAddr":"0x000b57fffe2289d7","_networkAddress":42472,"_manufacturerID":4476,"_endpoints":[{"ID":1,"profileID":260 zigbee.0 2020-04-29 20:00:53.289 debug (2343) Received Zigbee message from '0x000b57fffe2289d7', type 'readResponse', cluster 'genBasic', data '{"modelId":"TRADFRI bulb E27 WS clear 950lm"}' from endpoint 1 with groupID null zigbee.0 2020-04-29 20:00:53.285 debug (2343) handleMessage. {"type":"readResponse","device":{"ID":3,"_type":"Router","_ieeeAddr":"0x000b57fffe2289d7","_networkAddress":42472,"_manufacturerID":4476,"_endpoints":[{"ID":1,"profileID":260,"de zigbee.0 2020-04-29 20:00:27.341 debug (2343) User stateChange zigbee.0.info.pairingMode {"val":false,"ack":false,"ts":1588183227336,"q":0,"from":"system.adapter.zigbee.0","user":"system.user.admin","lc":1588182011624} zigbee.0 2020-04-29 20:00:27.335 info (2343) Zigbee: stop joining zigbee.0 2020-04-29 20:00:10.650 debug (2343) Failed to get map: "TypeError: Cannot read property 'stack' of undefined\n at ZigbeeController.getMap (/opt/iobroker/node_modules/iobroker.zigbee/lib/zigbeecontroller.js:536:115)" zigbee.0 2020-04-29 19:59:51.834 info (2343) Starting interview of '0x000b57fffe2289d7' zigbee.0 2020-04-29 19:59:51.831 debug (2343) handleDeviceInterview. {"status":"started","device":{"ID":3,"_ieeeAddr":"0x000b57fffe2289d7","_networkAddress":42472,"_endpoints":[],"_interviewCompleted":false,"_interviewing":false,"meta":{}, zigbee.0 2020-04-29 19:59:51.830 debug (2343) handleDeviceJoined. {"device":{"ID":3,"_ieeeAddr":"0x000b57fffe2289d7","_networkAddress":42472,"_endpoints":[],"_interviewCompleted":false,"_interviewing":false,"meta":{},"_lastSeen":null}} zigbee.0 2020-04-29 19:59:25.996 debug (2343) sendTo "letsPairing" to system.adapter.admin.0 from system.adapter.zigbee.0: Start pairing! zigbee.0 2020-04-29 19:59:25.996 info (2343) Zigbee: allowing new devices to join. zigbee.0 2020-04-29 19:59:10.534 debug (2343) LQI succeeded for 'Coordinator' zigbee.0 2020-04-29 19:59:09.477 debug (2343) sendTo "listUart" to system.adapter.admin.0 from system.adapter.zigbee.0 zigbee.0 2020-04-29 19:59:09.476 debug (2343) List of ports: [{"comName":"/dev/ttyACM0"},{"comName":"/dev/ttyUSB0"},{"comName":"/dev/ttyS0"},{"comName":"/dev/ttyS1"},{"comName":"/dev/ttyS10"},{"comName":"/dev/ttyS11"},{"comName":"/dev/ttyS zigbee.0 2020-04-29 19:59:09.455 debug (2343) sendTo "getBinding" to system.adapter.admin.0 from system.adapter.zigbee.0 zigbee.0 2020-04-29 19:59:09.454 debug (2343) getBinding result: [] zigbee.0 2020-04-29 19:59:09.330 debug (2343) sendTo "getDevices" to system.adapter.admin.0 from system.adapter.zigbee.0 zigbee.0 2020-04-29 19:59:09.330 debug (2343) getDevices result: [{"_id":"0x00212effff00b043","icon":"img/unknown.png","paired":true,"info":{"type":"device","device":{"ID":1,"_type":"Coordinator","_ieeeAddr":"0x00212effff00b043","_networkA zigbee.0 2020-04-29 19:59:09.285 debug (2343) sendTo "getGroups" to system.adapter.admin.0 from system.adapter.zigbee.0 zigbee.0 2020-04-29 19:59:09.285 debug (2343) getGroups result: {} zigbee.0 2020-04-29 19:59:09.280 debug (2343) sendTo "getLibData" to system.adapter.admin.0 from system.adapter.zigbee.0 zigbee.0 2020-04-29 19:59:01.750 debug (2343) User stateChange zigbee.0.info.pairingMode {"val":false,"ack":false,"ts":1588183141743,"q":0,"from":"system.adapter.zigbee.0","user":"system.user.admin","lc":1588182011624} zigbee.0 2020-04-29 19:59:01.742 info (2343) Zigbee: stop joining zigbee.0 2020-04-29 19:58:59.628 debug (2343) Failed to get map: "TypeError: Cannot read property 'stack' of undefined\n at ZigbeeController.getMap (/opt/iobroker/node_modules/iobroker.zigbee/lib/zigbeecontroller.js:536:115)" zigbee.0 2020-04-29 19:58:00.435 debug (2343) sendTo "letsPairing" to system.adapter.admin.0 from system.adapter.zigbee.0: Start pairing! zigbee.0 2020-04-29 19:58:00.433 info (2343) Zigbee: allowing new devices to join. zigbee.0 2020-04-29 19:57:59.379 debug (2343) LQI succeeded for 'Coordinator' zigbee.0 2020-04-29 19:57:58.353 debug (2343) sendTo "getBinding" to system.adapter.admin.0 from system.adapter.zigbee.0 zigbee.0 2020-04-29 19:57:58.352 debug (2343) getBinding result: [] zigbee.0 2020-04-29 19:57:58.301 debug (2343) sendTo "listUart" to system.adapter.admin.0 from system.adapter.zigbee.0 zigbee.0 2020-04-29 19:57:58.300 debug (2343) List of ports: [{"comName":"/dev/ttyACM0"},{"comName":"/dev/ttyUSB0"},{"comName":"/dev/ttyS0"},{"comName":"/dev/ttyS1"},{"comName":"/dev/ttyS10"},{"comName":"/dev/ttyS11"},{"comName":"/dev/ttyS zigbee.0 2020-04-29 19:57:58.184 debug (2343) sendTo "getDevices" to system.adapter.admin.0 from system.adapter.zigbee.0 zigbee.0 2020-04-29 19:57:58.183 debug (2343) getDevices result: [{"_id":"0x00212effff00b043","icon":"img/unknown.png","paired":true,"info":{"type":"device","device":{"ID":1,"_type":"Coordinator","_ieeeAddr":"0x00212effff00b043","_networkA zigbee.0 2020-04-29 19:57:58.130 debug (2343) sendTo "getGroups" to system.adapter.admin.0 from system.adapter.zigbee.0 zigbee.0 2020-04-29 19:57:58.130 debug (2343) getGroups result: {} zigbee.0 2020-04-29 19:57:58.120 debug (2343) sendTo "getLibData" to system.adapter.admin.0 from system.adapter.zigbee.0 zigbee.0 2020-04-29 19:57:41.990 info (2343) Zigbee started
-
@MartinMuc said in Zigbee Adapter und Conbee Unterstützung:
Meine Hue Lampen funktionieren einwandfrei mit dem ConbeeII, ich habe allerdings Probleme mit den HUE Bewegungsmeldern und Schaltern.
Beim Bewegungsmelder bekomme ich beim anlernen folgenden Fehler, das hat zur folge das er zwar angezegit wird, aber ich keine Daten empfange. Selbst PRoblem besteht bei dem Dimmerschalter.
Hat jemand eine Idee was hier krumm sein könnte ? Version ist die 1.1.0.0
Danke
Martinzigbee.0 2020-04-17 13:54:02.203 error at Object.delayAction [as action] (/opt/iobroker/node_modules/iobroker.zigbee/lib/zigbeecontroller.js:360:69)) zigbee.0 2020-04-17 13:54:02.203 error (1525) Failed to do action 0x0017880110486638 RWL021, attempt 2 (TypeError: Cannot read property 'stack' of undefined zigbee.0 2020-04-17 13:54:01.203 error at rejected (/opt/iobroker/node_modules/zigbee-herdsman/dist/controller/model/endpoint.js:6:65)) zigbee.0 2020-04-17 13:54:01.203 error at Generator.throw (<anonymous>) zigbee.0 2020-04-17 13:54:01.203 error at Endpoint.<anonymous> (/opt/iobroker/node_modules/zigbee-herdsman/dist/controller/model/endpoint.js:244:23) zigbee.0 2020-04-17 13:54:01.203 error (1525) Failed to configure 0x0017880110486638 RWL021, attempt NaN (Error: Bind 0x0017880110486638/1 genLevelCtrl from '0x00212effff054b00/1' failed (undefined) zigbee.0 2020-04-17 13:53:01.239 info (1525) Do action on 0x0017880110486638 RWL021 zigbee.0 2020-04-17 13:53:01.239 info (1525) Do action succesfully 0x0017880110486638 RWL021 zigbee.0 2020-04-17 13:53:00.638 info (1525) Do action on 0x0017880110486638 RWL021 zigbee.0 2020-04-17 13:53:00.637 info (1525) Configuring 0x0017880110486638 RWL021 zigbee.0 2020-04-17 13:46:26.582 info (1525) Zigbee: stop joining zigbee.0 2020-04-17 13:45:59.447 error at fulfilled (/opt/iobroker/node_modules/zigbee-herdsman/dist/controller/model/endpoint.js:5:58)) zigbee.0 2020-04-17 13:45:59.447 error at Generator.next (<anonymous>) zigbee.0 2020-04-17 13:45:59.447 error at Endpoint.<anonymous> (/opt/iobroker/node_modules/zigbee-herdsman/dist/controller/model/endpoint.js:326:23) zigbee.0 2020-04-17 13:45:59.447 error (1525) Failed to configure 0x0017880102006d0c SML001, attempt 1 (Error: ConfigureReporting 0x0017880102006d0c/2 genPowerCfg([{"attribute":"batteryPercentageRemaining","minimumReportInterval":3600,"ma zigbee.0 2020-04-17 13:45:56.849 info (1525) Configuring 0x0017880102006d0c SML001 zigbee.0 2020-04-17 13:45:56.847 info (1525) Device '0x0017880102006d0c' is supported, identified as: Philips Hue motion sensor (9290012607) zigbee.0 2020-04-17 13:45:56.846 info (1525) Successfully interviewed '0x0017880102006d0c', device has succesfully been paired zigbee.0 2020-04-17 13:45:48.425 info (1525) Starting interview of '0x0017880102006d0c' Pairing time left: 27 Error: Failed to configure 0x0017880102006d0c SML001, attempt 1 (Error: ConfigureReporting 0x0017880102006d0c/2 genPowerCfg([{"attribute":"batteryPercentageRemaining","minimumReportInterval":3600,"maximumReportInterval":62000,"reportableChange":0}], {"timeout":10000,"manufacturerCode":null,"disableDefaultResponse":true}) failed (TypeError: payload is not iterable) at Endpoint.<anonymous> (/opt/iobroker/node_modules/zigbee-herdsman/dist/controller/model/endpoint.js:326:23) at Generator.next (<anonymous>) at fulfilled (/opt/iobroker/node_modules/zigbee-herdsman/dist/controller/model/endpoint.js:5:58)). undefined Pairing time left: 28 Pairing time left: 29 New device joined '0x0017880102006d0c' model SML001 Interview successful: {"friendly_name":"0x0017880102006d0c","model":"9290012607","vendor":"Philips","description":"Hue motion sensor","supported":true} Pairing time left: 30 Pairing time left: 31 Pairing time left: 32 Pairing time left: 33 Pairing time left: 34 Pairing time left: 35 Pairing time left: 36 Pairing time left: 37 Pairing time left: 38 Interview started: 0x0017880102006d0cNiemand eine Idee ? Bastle heute noch ein bisschen wenn es dann nicht klappt muss ich die alte Huebridge ausgraben und die einbinden (was ich eigentlich vermeiden wollte)
-
@Plasmachef sagte in Zigbee Adapter und Conbee Unterstützung:
@Glasfaser... so... habe für Samstag das Teil bestellt... sollte der Fehler wieder auftreten, was ich vermute, dann bin ich wieder da
Hallo die Zweite,
jetzt mit anderer Hardware und dem SELBEN Problem:
Bin hier grad am Testen und versuche meinen Raspi Pi 4 mit Conbee II und dem Danalock zusammen zubringen.
Conbee II eingesteckt
Zigbee über Katze geladen (Version 1.1.1), Instanz angelegt und die Hardware ausgewählt
--> Instanz grünInstanz und Danalock V3 auf pairing ... jetzt kommts:
2020-05-02 15:17:59.402 - info: zigbee.0 (10320) starting. Version 1.1.1 in /opt/iobroker/node_modules/iobroker.zigbee, node: v12.16.2 2020-05-02 15:17:59.437 - info: zigbee.0 (10320) Starting Zigbee... 2020-05-02 15:17:59.857 - info: zigbee.0 (10320) Coordinator firmware version: {"type":"ConBee2","meta":{"transportrev":0,"product":0,"majorrel":38,"minorrel":74,"maintrel":0,"revision":"0x264a0700"}} 2020-05-02 15:18:00.066 - info: zigbee.0 (10320) Unable to disable LED, unsupported function. 2020-05-02 15:18:00.067 - info: zigbee.0 (10320) --> transmitPower : normal 2020-05-02 15:18:00.069 - info: zigbee.0 (10320) Unable to set transmit power, unsupported function. 2020-05-02 15:18:00.071 - info: zigbee.0 (10320) Currently no devices. 2020-05-02 15:18:00.072 - info: zigbee.0 (10320) Zigbee started 2020-05-02 15:19:23.143 - info: zigbee.0 (10320) Zigbee: allowing new devices to join. 2020-05-02 15:19:31.554 - info: zigbee.0 (10320) Starting interview of '0x000b57fffe46ebec' 2020-05-02 15:19:43.707 - info: zigbee.0 (10320) Successfully interviewed '0x000b57fffe46ebec', device has succesfully been paired 2020-05-02 15:19:43.708 - info: zigbee.0 (10320) Device '0x000b57fffe46ebec' is supported, identified as: Danalock BT/ZB smartlock (V3-BTZB) 2020-05-02 15:19:43.711 - info: zigbee.0 (10320) Configuring 0x000b57fffe46ebec V3-BTZB 2020-05-02 15:19:45.724 - error: zigbee.0 (10320) Failed to configure 0x000b57fffe46ebec V3-BTZB, attempt 1 (Error: ConfigureReporting 0x000b57fffe46ebec/1 closuresDoorLock([{"attribute":"lockState","minimumReportInterval":0,"maximumReportInterval":3600,"reportableChange":0}], {"timeout":10000,"manufacturerCode":null,"disableDefaultResponse":true}) failed (Error: Status 'INVALID_DATA_TYPE') at Endpoint. (/opt/iobroker/node_modules/zigbee-herdsman/dist/controller/model/endpoint.js:326:23) at Generator.next () at fulfilled (/opt/iobroker/node_modules/zigbee-herdsman/dist/controller/model/endpoint.js:5:58))Leider kann ich mit dem Teil so nichts anfangen
Einige Objekte wurden angelegt, aber mehr passiert leider nicht ... kann nichts schalten oder konfigurieren ... auch das Lock gibt kein Feedback zur InstanzKönnt ihr mir bitte helfen?
Danke und Grüße Plasma
-
so ... jetzt wirds spannend ... es gibt noch mehr zu berichten:
ich hab dann mal bisschen mit dem Teil "gespielt" und siehe da... der Befehl lock bzw. unlock wurde akzepiert und auch korrekt quittiert.
nach restart der instanz bekam ich dann noch ein weiteres objekt dazu: available
die anderen objekte waren tot ... und auch available hat nicht wirklich sich verändert.
ich hatte mal einen verbindungsabbruch simuliert in dem in die batterien rausnahm ... seither ging gar nichts mehr.- konnte das gerät nicht löschen
- pairing zählte nur noch von 5 runter statt von 60
- instanz löschen und neu aufsetzen half auch nichts...er merkte sich alle allen daten
-neustart von iobroker brachte auch nichts
ich lösche die instanz (zigbee.0) und legte eine neue an (zigbee.1)
hier gab es keine altlasten und das pairing klappte
man konnte wieder zugreifen auf das gerät ... sogar diesmal mit zugabe:
linkquality kam mit dazu und refreshte sich auch regelmäßig ... immer so zwischen 3 und 4 ... was das auch immer bedeutet.
nachfolgend alle logeinträge von instanz zigbee.1
2020-05-02 16:45:56.301 - error: host.raspberrypi instance system.adapter.zigbee.0 terminated with code 156 (156) 2020-05-02 16:45:56.302 - info: host.raspberrypi Do not restart adapter system.adapter.zigbee.0 because disabled or deleted 2020-05-02 16:46:54.917 - info: host.raspberrypi iobroker add zigbee 1 --host raspberrypi 2020-05-02 16:46:56.601 - info: host.raspberrypi iobroker host.raspberrypi create instance zigbee 2020-05-02 16:46:56.630 - info: host.raspberrypi iobroker host.raspberrypi object zigbee.1.info.groups created 2020-05-02 16:46:56.659 - info: host.raspberrypi iobroker host.raspberrypi object zigbee.1.info.pairingMessage created 2020-05-02 16:46:56.688 - info: host.raspberrypi iobroker host.raspberrypi object zigbee.1.info.pairingCountdown created 2020-05-02 16:46:56.717 - info: host.raspberrypi iobroker host.raspberrypi object zigbee.1.info.pairingMode created 2020-05-02 16:46:56.747 - info: host.raspberrypi iobroker host.raspberrypi object zigbee.1.info.connection created 2020-05-02 16:46:56.777 - info: host.raspberrypi iobroker host.raspberrypi object zigbee.1.info created 2020-05-02 16:46:56.811 - info: host.raspberrypi iobroker host.raspberrypi object system.adapter.zigbee.1.sigKill created 2020-05-02 16:46:56.844 - info: host.raspberrypi iobroker host.raspberrypi object system.adapter.zigbee.1.eventLoopLag created 2020-05-02 16:46:56.879 - info: host.raspberrypi iobroker host.raspberrypi object system.adapter.zigbee.1.outputCount created 2020-05-02 16:46:56.911 - info: host.raspberrypi iobroker host.raspberrypi object system.adapter.zigbee.1.inputCount created 2020-05-02 16:46:56.943 - info: host.raspberrypi iobroker host.raspberrypi object system.adapter.zigbee.1.uptime created 2020-05-02 16:46:56.975 - info: host.raspberrypi iobroker host.raspberrypi object system.adapter.zigbee.1.memRss created 2020-05-02 16:46:57.007 - info: host.raspberrypi iobroker host.raspberrypi object system.adapter.zigbee.1.memHeapTotal created 2020-05-02 16:46:57.039 - info: host.raspberrypi iobroker host.raspberrypi object system.adapter.zigbee.1.memHeapUsed created 2020-05-02 16:46:57.070 - info: host.raspberrypi iobroker host.raspberrypi object system.adapter.zigbee.1.cputime created 2020-05-02 16:46:57.102 - info: host.raspberrypi iobroker host.raspberrypi object system.adapter.zigbee.1.cpu created 2020-05-02 16:46:57.137 - info: host.raspberrypi iobroker host.raspberrypi object system.adapter.zigbee.1.compactMode created 2020-05-02 16:46:57.179 - info: host.raspberrypi iobroker host.raspberrypi object system.adapter.zigbee.1.connected created 2020-05-02 16:46:57.222 - info: host.raspberrypi iobroker host.raspberrypi object system.adapter.zigbee.1.alive created 2020-05-02 16:46:57.305 - info: host.raspberrypi iobroker host.raspberrypi object system.adapter.zigbee.1 created 2020-05-02 16:46:58.314 - info: host.raspberrypi iobroker exit 0 2020-05-02 16:46:59.830 - info: host.raspberrypi instance system.adapter.zigbee.1 started with pid 9847 2020-05-02 16:47:03.617 - info: zigbee.1 (9847) starting. Version 1.1.1 in /opt/iobroker/node_modules/iobroker.zigbee, node: v12.16.2 2020-05-02 16:47:03.649 - error: zigbee.1 (9847) Serial port not selected! Go to settings page. 2020-05-02 16:47:03.652 - info: zigbee.1 (9847) Starting Zigbee... 2020-05-02 16:47:03.962 - error: zigbee.1 (9847) Failed to start Zigbee 2020-05-02 16:47:03.963 - error: zigbee.1 (9847) Error: No path provided and failed to auto detect path at Function. (/opt/iobroker/node_modules/zigbee-herdsman/dist/adapter/adapter.js:69:27) at Generator.next () at fulfilled (/opt/iobroker/node_modules/zigbee-herdsman/dist/adapter/adapter.js:5:58) at processTicksAndRejections (internal/process/task_queues.js:97:5) 2020-05-02 16:47:13.966 - info: zigbee.1 (9847) Try to reconnect. 1 attempts left 2020-05-02 16:47:13.967 - info: zigbee.1 (9847) Starting Zigbee... 2020-05-02 16:47:14.172 - error: zigbee.1 (9847) Failed to start Zigbee 2020-05-02 16:47:14.173 - error: zigbee.1 (9847) Error: No path provided and failed to auto detect path at Function. (/opt/iobroker/node_modules/zigbee-herdsman/dist/adapter/adapter.js:69:27) at Generator.next () at fulfilled (/opt/iobroker/node_modules/zigbee-herdsman/dist/adapter/adapter.js:5:58) at processTicksAndRejections (internal/process/task_queues.js:97:5) 2020-05-02 16:47:41.210 - info: host.raspberrypi stopInstance system.adapter.zigbee.1 (force=false, process=true) 2020-05-02 16:47:41.228 - info: host.raspberrypi stopInstance system.adapter.zigbee.1 send kill signal 2020-05-02 16:47:41.228 - info: zigbee.1 (9847) Got terminate signal TERMINATE_YOURSELF 2020-05-02 16:47:41.231 - info: zigbee.1 (9847) cleaned everything up... 2020-05-02 16:47:41.243 - error: zigbee.1 (9847) Failed to stop zigbee (TypeError: Cannot read property 'getEntries' of null at Function.loadFromDatabaseIfNecessary (/opt/iobroker/node_modules/zigbee-herdsman/dist/controller/model/device.js:200:55) at Function.byIeeeAddr (/opt/iobroker/node_modules/zigbee-herdsman/dist/controller/model/device.js:208:16) at Controller.getDeviceByIeeeAddr (/opt/iobroker/node_modules/zigbee-herdsman/dist/controller/controller.js:235:31) at ZigbeeController.getDevice (/opt/iobroker/node_modules/iobroker.zigbee/lib/zigbeecontroller.js:212:30) at ZigbeeController.permitJoin (/opt/iobroker/node_modules/iobroker.zigbee/lib/zigbeecontroller.js:319:30) at ZigbeeController.stop (/opt/iobroker/node_modules/iobroker.zigbee/lib/zigbeecontroller.js:306:24) at processTicksAndRejections (internal/process/task_queues.js:97:5) at async Zigbee.onUnload (/opt/iobroker/node_modules/iobroker.zigbee/main.js:334:17)) 2020-05-02 16:47:41.245 - info: zigbee.1 (9847) terminating 2020-05-02 16:47:41.247 - info: zigbee.1 (9847) Terminated (START_IMMEDIATELY_AFTER_STOP): Without reason 2020-05-02 16:47:41.775 - info: host.raspberrypi instance system.adapter.zigbee.1 terminated with code 156 (156) 2020-05-02 16:47:43.812 - info: host.raspberrypi instance system.adapter.zigbee.1 started with pid 11027 2020-05-02 16:47:46.082 - info: zigbee.1 (11027) starting. Version 1.1.1 in /opt/iobroker/node_modules/iobroker.zigbee, node: v12.16.2 2020-05-02 16:47:46.150 - error: zigbee.1 (11027) Serial port not selected! Go to settings page. 2020-05-02 16:47:46.155 - info: zigbee.1 (11027) Starting Zigbee... 2020-05-02 16:47:46.609 - info: zigbee.1 (11027) Coordinator firmware version: {"type":"ConBee2","meta":{"transportrev":0,"product":0,"majorrel":38,"minorrel":74,"maintrel":0,"revision":"0x264a0700"}} 2020-05-02 16:47:53.137 - info: zigbee.1 (11027) Unable to disable LED, unsupported function. 2020-05-02 16:47:53.139 - info: zigbee.1 (11027) --> transmitPower : normal 2020-05-02 16:47:53.141 - info: zigbee.1 (11027) Unable to set transmit power, unsupported function. 2020-05-02 16:47:53.144 - info: zigbee.1 (11027) Currently no devices. 2020-05-02 16:47:53.145 - info: zigbee.1 (11027) Zigbee started 2020-05-02 16:48:41.400 - info: zigbee.1 (11027) Zigbee: allowing new devices to join. 2020-05-02 16:48:54.061 - info: zigbee.1 (11027) Starting interview of '0x000b57fffe46ebec' 2020-05-02 16:49:05.697 - info: zigbee.1 (11027) Successfully interviewed '0x000b57fffe46ebec', device has succesfully been paired 2020-05-02 16:49:05.699 - info: zigbee.1 (11027) Device '0x000b57fffe46ebec' is supported, identified as: Danalock BT/ZB smartlock (V3-BTZB) 2020-05-02 16:49:05.703 - info: zigbee.1 (11027) Configuring 0x000b57fffe46ebec V3-BTZB 2020-05-02 16:49:07.709 - error: zigbee.1 (11027) Failed to configure 0x000b57fffe46ebec V3-BTZB, attempt 1 (Error: ConfigureReporting 0x000b57fffe46ebec/1 closuresDoorLock([{"attribute":"lockState","minimumReportInterval":0,"maximumReportInterval":3600,"reportableChange":0}], {"timeout":10000,"manufacturerCode":null,"disableDefaultResponse":true}) failed (Error: Status 'INVALID_DATA_TYPE') at Endpoint. (/opt/iobroker/node_modules/zigbee-herdsman/dist/controller/model/endpoint.js:326:23) at Generator.next () at fulfilled (/opt/iobroker/node_modules/zigbee-herdsman/dist/controller/model/endpoint.js:5:58)) 2020-05-02 16:49:25.572 - info: zigbee.1 (11027) Configuring 0x000b57fffe46ebec V3-BTZB 2020-05-02 16:49:27.590 - error: zigbee.1 (11027) Failed to configure 0x000b57fffe46ebec V3-BTZB, attempt 2 (Error: ConfigureReporting 0x000b57fffe46ebec/1 closuresDoorLock([{"attribute":"lockState","minimumReportInterval":0,"maximumReportInterval":3600,"reportableChange":0}], {"timeout":10000,"manufacturerCode":null,"disableDefaultResponse":true}) failed (Error: Status 'INVALID_DATA_TYPE') at Endpoint. (/opt/iobroker/node_modules/zigbee-herdsman/dist/controller/model/endpoint.js:326:23) at Generator.next () at fulfilled (/opt/iobroker/node_modules/zigbee-herdsman/dist/controller/model/endpoint.js:5:58)) 2020-05-02 16:49:28.590 - info: zigbee.1 (11027) Configuring 0x000b57fffe46ebec V3-BTZB 2020-05-02 16:49:30.607 - error: zigbee.1 (11027) Failed to configure 0x000b57fffe46ebec V3-BTZB, attempt 3 (Error: ConfigureReporting 0x000b57fffe46ebec/1 closuresDoorLock([{"attribute":"lockState","minimumReportInterval":0,"maximumReportInterval":3600,"reportableChange":0}], {"timeout":10000,"manufacturerCode":null,"disableDefaultResponse":true}) failed (Error: Status 'INVALID_DATA_TYPE') at Endpoint. (/opt/iobroker/node_modules/zigbee-herdsman/dist/controller/model/endpoint.js:326:23) at Generator.next () at fulfilled (/opt/iobroker/node_modules/zigbee-herdsman/dist/controller/model/endpoint.js:5:58)) 2020-05-02 16:49:31.618 - info: zigbee.1 (11027) Configuring 0x000b57fffe46ebec V3-BTZB 2020-05-02 16:49:33.630 - error: zigbee.1 (11027) Failed to configure 0x000b57fffe46ebec V3-BTZB, attempt 4 (Error: ConfigureReporting 0x000b57fffe46ebec/1 closuresDoorLock([{"attribute":"lockState","minimumReportInterval":0,"maximumReportInterval":3600,"reportableChange":0}], {"timeout":10000,"manufacturerCode":null,"disableDefaultResponse":true}) failed (Error: Status 'INVALID_DATA_TYPE') at Endpoint. (/opt/iobroker/node_modules/zigbee-herdsman/dist/controller/model/endpoint.js:326:23) at Generator.next () at fulfilled (/opt/iobroker/node_modules/zigbee-herdsman/dist/controller/model/endpoint.js:5:58)) 2020-05-02 16:49:34.631 - info: zigbee.1 (11027) Configuring 0x000b57fffe46ebec V3-BTZB 2020-05-02 16:49:36.649 - error: zigbee.1 (11027) Failed to configure 0x000b57fffe46ebec V3-BTZB, attempt 5 (Error: ConfigureReporting 0x000b57fffe46ebec/1 closuresDoorLock([{"attribute":"lockState","minimumReportInterval":0,"maximumReportInterval":3600,"reportableChange":0}], {"timeout":10000,"manufacturerCode":null,"disableDefaultResponse":true}) failed (Error: Status 'INVALID_DATA_TYPE') at Endpoint. (/opt/iobroker/node_modules/zigbee-herdsman/dist/controller/model/endpoint.js:326:23) at Generator.next () at fulfilled (/opt/iobroker/node_modules/zigbee-herdsman/dist/controller/model/endpoint.js:5:58)) 2020-05-02 16:49:43.076 - info: zigbee.1 (11027) Zigbee: stop joining 2020-05-02 16:52:52.952 - info: host.raspberrypi stopInstance system.adapter.zigbee.1 (force=false, process=true) 2020-05-02 16:52:52.964 - info: host.raspberrypi stopInstance system.adapter.zigbee.1 send kill signal 2020-05-02 16:52:52.965 - info: zigbee.1 (11027) Got terminate signal TERMINATE_YOURSELF 2020-05-02 16:52:52.967 - info: zigbee.1 (11027) cleaned everything up... 2020-05-02 16:52:52.970 - info: zigbee.1 (11027) Zigbee: disabling joining new devices. 2020-05-02 16:52:53.470 - info: zigbee.1 (11027) terminating 2020-05-02 16:52:53.471 - info: zigbee.1 (11027) Terminated (START_IMMEDIATELY_AFTER_STOP): Without reason 2020-05-02 16:52:53.970 - info: host.raspberrypi stopInstance system.adapter.zigbee.1 killing pid 11027 2020-05-02 16:52:54.028 - info: host.raspberrypi instance system.adapter.zigbee.1 terminated with code 156 (156) 2020-05-02 16:52:55.524 - info: host.raspberrypi instance system.adapter.zigbee.1 started with pid 18536 2020-05-02 16:52:57.823 - info: zigbee.1 (18536) starting. Version 1.1.1 in /opt/iobroker/node_modules/iobroker.zigbee, node: v12.16.2 2020-05-02 16:52:57.869 - error: zigbee.1 (18536) Serial port not selected! Go to settings page. 2020-05-02 16:52:57.873 - info: zigbee.1 (18536) Starting Zigbee... 2020-05-02 16:52:58.322 - info: zigbee.1 (18536) Coordinator firmware version: {"type":"ConBee2","meta":{"transportrev":0,"product":0,"majorrel":38,"minorrel":74,"maintrel":0,"revision":"0x264a0700"}} 2020-05-02 16:52:58.523 - info: zigbee.1 (18536) Unable to disable LED, unsupported function. 2020-05-02 16:52:58.524 - info: zigbee.1 (18536) --> transmitPower : normal 2020-05-02 16:52:58.525 - info: zigbee.1 (18536) Unable to set transmit power, unsupported function. 2020-05-02 16:52:58.530 - info: zigbee.1 (18536) Currently 1 devices are joined: 2020-05-02 16:52:58.533 - info: zigbee.1 (18536) Configuring 0x000b57fffe46ebec V3-BTZB 2020-05-02 16:52:58.540 - info: zigbee.1 (18536) 0x000b57fffe46ebec (addr 61935): V3-BTZB - Danalock BT/ZB smartlock (EndDevice) 2020-05-02 16:52:58.541 - info: zigbee.1 (18536) Zigbee started 2020-05-02 16:53:02.407 - error: zigbee.1 (18536) Failed to configure 0x000b57fffe46ebec V3-BTZB, attempt 1 (Error: ConfigureReporting 0x000b57fffe46ebec/1 closuresDoorLock([{"attribute":"lockState","minimumReportInterval":0,"maximumReportInterval":3600,"reportableChange":0}], {"timeout":10000,"manufacturerCode":null,"disableDefaultResponse":true}) failed (Error: Status 'INVALID_DATA_TYPE') at Endpoint. (/opt/iobroker/node_modules/zigbee-herdsman/dist/controller/model/endpoint.js:326:23) at Generator.next () at fulfilled (/opt/iobroker/node_modules/zigbee-herdsman/dist/controller/model/endpoint.js:5:58)) 2020-05-02 16:53:30.919 - info: zigbee.1 (18536) Configuring 0x000b57fffe46ebec V3-BTZB 2020-05-02 16:53:33.426 - error: zigbee.1 (18536) Failed to configure 0x000b57fffe46ebec V3-BTZB, attempt 2 (Error: ConfigureReporting 0x000b57fffe46ebec/1 closuresDoorLock([{"attribute":"lockState","minimumReportInterval":0,"maximumReportInterval":3600,"reportableChange":0}], {"timeout":10000,"manufacturerCode":null,"disableDefaultResponse":true}) failed (Error: Status 'INVALID_DATA_TYPE') at Endpoint. (/opt/iobroker/node_modules/zigbee-herdsman/dist/controller/model/endpoint.js:326:23) at Generator.next () at fulfilled (/opt/iobroker/node_modules/zigbee-herdsman/dist/controller/model/endpoint.js:5:58)) 2020-05-02 16:53:47.481 - info: zigbee.1 (18536) Configuring 0x000b57fffe46ebec V3-BTZB 2020-05-02 16:53:49.984 - error: zigbee.1 (18536) Failed to configure 0x000b57fffe46ebec V3-BTZB, attempt 3 (Error: ConfigureReporting 0x000b57fffe46ebec/1 closuresDoorLock([{"attribute":"lockState","minimumReportInterval":0,"maximumReportInterval":3600,"reportableChange":0}], {"timeout":10000,"manufacturerCode":null,"disableDefaultResponse":true}) failed (Error: Status 'INVALID_DATA_TYPE') at Endpoint. (/opt/iobroker/node_modules/zigbee-herdsman/dist/controller/model/endpoint.js:326:23) at Generator.next () at fulfilled (/opt/iobroker/node_modules/zigbee-herdsman/dist/controller/model/endpoint.js:5:58)) 2020-05-02 16:56:02.105 - info: zigbee.1 (18536) Configuring 0x000b57fffe46ebec V3-BTZB 2020-05-02 16:56:07.125 - error: zigbee.1 (18536) Failed to configure 0x000b57fffe46ebec V3-BTZB, attempt 4 (Error: ConfigureReporting 0x000b57fffe46ebec/1 closuresDoorLock([{"attribute":"lockState","minimumReportInterval":0,"maximumReportInterval":3600,"reportableChange":0}], {"timeout":10000,"manufacturerCode":null,"disableDefaultResponse":true}) failed (Error: Status 'INVALID_DATA_TYPE') at Endpoint. (/opt/iobroker/node_modules/zigbee-herdsman/dist/controller/model/endpoint.js:326:23) at Generator.next () at fulfilled (/opt/iobroker/node_modules/zigbee-herdsman/dist/controller/model/endpoint.js:5:58)) 2020-05-02 16:56:53.605 - info: zigbee.1 (18536) Configuring 0x000b57fffe46ebec V3-BTZB 2020-05-02 16:56:57.118 - error: zigbee.1 (18536) Failed to configure 0x000b57fffe46ebec V3-BTZB, attempt 5 (Error: ConfigureReporting 0x000b57fffe46ebec/1 closuresDoorLock([{"attribute":"lockState","minimumReportInterval":0,"maximumReportInterval":3600,"reportableChange":0}], {"timeout":10000,"manufacturerCode":null,"disableDefaultResponse":true}) failed (Error: Status 'INVALID_DATA_TYPE') at Endpoint. (/opt/iobroker/node_modules/zigbee-herdsman/dist/controller/model/endpoint.js:326:23) at Generator.next () at fulfilled (/opt/iobroker/node_modules/zigbee-herdsman/dist/controller/model/endpoint.js:5:58))... und wieder zeigt available nicht den richtigen zustand an
hab die batterie erneut rausgenommen ... wieder kein kontakt bzw kein lock / unlock möglich
neustart der instanz bring nichts2020-05-02 17:28:36.558 - info: host.raspberrypi stopInstance system.adapter.zigbee.1 (force=false, process=true) 2020-05-02 17:28:36.570 - info: host.raspberrypi stopInstance system.adapter.zigbee.1 send kill signal 2020-05-02 17:28:36.571 - info: zigbee.1 (3673) Got terminate signal TERMINATE_YOURSELF 2020-05-02 17:28:36.573 - info: zigbee.1 (3673) cleaned everything up... 2020-05-02 17:28:36.576 - info: zigbee.1 (3673) Zigbee: disabling joining new devices. 2020-05-02 17:28:37.076 - info: zigbee.1 (3673) terminating 2020-05-02 17:28:37.078 - info: zigbee.1 (3673) Terminated (START_IMMEDIATELY_AFTER_STOP): Without reason 2020-05-02 17:28:37.576 - info: host.raspberrypi stopInstance system.adapter.zigbee.1 killing pid 3673 2020-05-02 17:28:37.629 - info: host.raspberrypi instance system.adapter.zigbee.1 terminated with code 156 (156) 2020-05-02 17:28:39.129 - info: host.raspberrypi instance system.adapter.zigbee.1 started with pid 5617 2020-05-02 17:28:41.476 - info: zigbee.1 (5617) starting. Version 1.1.1 in /opt/iobroker/node_modules/iobroker.zigbee, node: v12.16.2 2020-05-02 17:28:41.510 - info: zigbee.1 (5617) Starting Zigbee... 2020-05-02 17:28:41.928 - info: zigbee.1 (5617) Coordinator firmware version: {"type":"ConBee2","meta":{"transportrev":0,"product":0,"majorrel":38,"minorrel":74,"maintrel":0,"revision":"0x264a0700"}} 2020-05-02 17:28:42.131 - info: zigbee.1 (5617) Unable to disable LED, unsupported function. 2020-05-02 17:28:42.132 - info: zigbee.1 (5617) --> transmitPower : normal 2020-05-02 17:28:42.134 - info: zigbee.1 (5617) Unable to set transmit power, unsupported function. 2020-05-02 17:28:42.142 - info: zigbee.1 (5617) Currently 1 devices are joined: 2020-05-02 17:28:42.148 - info: zigbee.1 (5617) Configuring 0x000b57fffe46ebec V3-BTZB 2020-05-02 17:28:42.162 - info: zigbee.1 (5617) 0x000b57fffe46ebec (addr 61935): V3-BTZB - Danalock BT/ZB smartlock (EndDevice) 2020-05-02 17:28:42.164 - info: zigbee.1 (5617) Zigbee started 2020-05-02 17:29:42.783 - error: zigbee.1 (5617) Failed to configure 0x000b57fffe46ebec V3-BTZB, attempt 1 (Error: Bind 0x000b57fffe46ebec/1 closuresDoorLock from '0x00212effff05994f/1' failed (undefined) at Endpoint. (/opt/iobroker/node_modules/zigbee-herdsman/dist/controller/model/endpoint.js:244:23) at Generator.throw () at rejected (/opt/iobroker/node_modules/zigbee-herdsman/dist/controller/model/endpoint.js:6:65))das gerät scheint zwar kontakt zu haben, aber kommunikation ist nicht möglich
wieder lässt sich das Lock nicht aus der instanz löschen und beim pairing erscheint dann folgendes
2020-05-02 17:47:24.636 - info: zigbee.1 (5617) Do action on 0x000b57fffe46ebec V3-BTZB 2020-05-02 17:47:34.795 - info: zigbee.1 (5617) Do action on 0x000b57fffe46ebec V3-BTZB 2020-05-02 17:48:07.605 - info: zigbee.1 (5617) Do action on 0x000b57fffe46ebec V3-BTZB 2020-05-02 17:48:12.949 - info: zigbee.1 (5617) Zigbee: allowing new devices to join. 2020-05-02 17:48:24.967 - error: zigbee.1 (5617) Failed to do action 0x000b57fffe46ebec V3-BTZB, attempt 1 (TypeError: Cannot read property 'stack' of undefined at Object.action (/opt/iobroker/node_modules/iobroker.zigbee/lib/zigbeecontroller.js:360:69)) 2020-05-02 17:48:34.975 - error: zigbee.1 (5617) Failed to do action 0x000b57fffe46ebec V3-BTZB, attempt 1 (TypeError: Cannot read property 'stack' of undefined at Object.action (/opt/iobroker/node_modules/iobroker.zigbee/lib/zigbeecontroller.js:360:69)) 2020-05-02 17:49:07.984 - error: zigbee.1 (5617) Failed to do action 0x000b57fffe46ebec V3-BTZB, attempt 1 (TypeError: Cannot read property 'stack' of undefined at Object.action (/opt/iobroker/node_modules/iobroker.zigbee/lib/zigbeecontroller.js:360:69)) 2020-05-02 17:49:19.007 - info: zigbee.1 (5617) Zigbee: stop joiningich hoffe sehr, dass meine ausführung helfen ... bin auch gerne bereit weitere test zu machen
danke schön
plasma
-
@Plasmachef sagte in Zigbee Adapter und Conbee Unterstützung:
Failed to configure 0x000b57fffe46ebec V3-BTZB, attempt 1
der Danalock bekommt "Failed to configure 0x000b57fffe46ebec V3-BTZB" .. ergo keine konfiguration vom Conbee...
ist ja hat beta ..
-
@arteck sagte in Zigbee Adapter und Conbee Unterstützung:
@Plasmachef sagte in Zigbee Adapter und Conbee Unterstützung:
Failed to configure 0x000b57fffe46ebec V3-BTZB, attempt 1
der Danalock bekommt "Failed to configure 0x000b57fffe46ebec V3-BTZB" .. ergo keine konfiguration vom Conbee...
ist ja hat beta ..
danke für die schnelle Antwort
was heißt das jetzt für mich?
wie kann ich unterstützen / helfen? ... was braucht ihr /du? -
im übrigen hab ich festgestellt, dass ich die "verbrannten instanzen" zurücksetzen kann, indem ich unter /iobroker-data die verzeichnisse zigbee_0 bzw zigbee_1 entferne, nachdem ich die instanzen gelöscht hatte.
-
@Plasmachef ich garnix... da ich den Conbee und das Danalok nicht habe.. kann ich dir nix zu sagen.. sry
-
Moin,
ich habe jetzt angefangen meine Geräte zu Pairen und bei dem Hue-Dimmer-Switch bekomme ich diverse Fehlermeldungen (siehe Log) das einbinden wird aber abgeschlossen. Doch ohne funktion.
Hab auch schon mehrfach Gelöscht und neu-Gepairt, leider ohne Erfolg.zigbee.0 2020-05-03 09:54:04.677 error at rejected (/opt/iobroker/node_modules/zigbee-herdsman/dist/controller/model/endpoint.js:6:65)) zigbee.0 2020-05-03 09:54:04.677 error at Generator.throw (<anonymous>) zigbee.0 2020-05-03 09:54:04.677 error at Endpoint.<anonymous> (/opt/iobroker/node_modules/zigbee-herdsman/dist/controller/model/endpoint.js:244:23) zigbee.0 2020-05-03 09:54:04.677 error (1328) Failed to configure 0x001788010807ecb2 RWL021, attempt 1 (Error: Bind 0x001788010807ecb2/1 genOnOff from '0x00212effff048af7/1' failed -
@c_hoch_b
beim Hue Motion Sensor sieht es auch nicht besser aus...zigbee.0 2020-05-03 10:03:01.460 error at fulfilled (/opt/iobroker/node_modules/zigbee-herdsman/dist/controller/model/endpoint.js:5:58)) zigbee.0 2020-05-03 10:03:01.460 error at Generator.next (<anonymous>) zigbee.0 2020-05-03 10:03:01.460 error at Endpoint.<anonymous> (/opt/iobroker/node_modules/zigbee-herdsman/dist/controller/model/endpoint.js:326:23) zigbee.0 2020-05-03 10:03:01.460 error (1328) Failed to configure 0x0017880106f46ae3 SML001, attempt 1 (Error: ConfigureReporting 0x0017880106f46ae3/2 genPowerCfg([{"attribute":"batkönnte es mit LightLink zusammenhängen??
-
@c_hoch_b Arteck hat mir bei
Failed to configure 0x0017880106f46ae3 SML001so geantwortet:
" .. ergo keine konfiguration vom Conbee...
ist ja hat beta .."
siehe paar Einträge drüber!
-
@Plasmachef
schräg... meine Aqara Sensoren/Schalter werden ohne Probleme erkannt und laufen.Und ausgerechnet die HUE-Sachen machen Probleme...
