Befehle von Neeo nach ioBroker senden
-
@UncleSam sagte in Befehle von Neeo nach ioBroker senden:
SDK Quellcode habe ich gesehen, dass newValue tatsächlich ein boolean ist; damit wäre es true oder false
Wie muss es genau heissen?
Wie folgt kann ich den Treiber nicht laden:
actualDriverObject.addSwitch({ name: 'Schalter', label: 'Schalter' },{ setter: (deviceId, newValue) => { switchState = newValue; if (newValue) { http("http://192.168.1.15:8087/set/javascript.0.Eigene_Datenpunkte.Neeo-Switch?value=wahr" } else { http("http://192.168.1.15:8087/set/javascript.0.Eigene_Datenpunkte.Neeo-Switch?value=falsch" } }, -
@Kusi Die schliessenden Klammern fehlen beim
http(...) -
@UncleSam das habe ich mir eben auch gedacht und beim zweiten Versuch getestet, aber dann kommt folgender Fehler:
pi@raspberrypi:~ $ node /home/pi/node_modules/neeo_driver-test /home/pi/node_modules/neeo_driver-test/index.js:29 actualDriverObject.addButtonHandler((buttonName, deviceId) => { ^ SyntaxError: Unexpected token '.' at wrapSafe (internal/modules/cjs/loader.js:1053:16) at Module._compile (internal/modules/cjs/loader.js:1101:27) at Object.Module._extensions..js (internal/modules/cjs/loader.js:1157:10) at Module.load (internal/modules/cjs/loader.js:985:32) at Function.Module._load (internal/modules/cjs/loader.js:878:14) at Function.executeUserEntryPoint [as runMain] (internal/modules/run_main.js:71:12) at internal/main/run_main_module.js:17:47So sieht es jetzt komplett aus:
"use strict"; const neeoapi = require("neeo-sdk"); const http = require("http.min"); let actualDriverObject; actualDriverObject = neeoapi.buildDevice("ioBroker"); // change "My first driver" to anything you like but keep the "" characters actualDriverObject.setType("ACCESSOIRE"); // can be changed to "ACCESSOIRE" or "AVRECEIVER" or "DVB" or "DVD" or "GAMECONSOLE" or "LIGHT" or "MEDIAPLAYER" or "MUSICPLAYER" or "PROJECTOR" or "TV" or "VOD" actualDriverObject.addButton({ name: "button-a", label: "Button A" }); // This makes a new button named button-a, on the remote its shown as Button A actualDriverObject.addButton({ name: "button-b", label: "Button B" }); // This makes a new button named button-b, on the remote its shown as Button B actualDriverObject.addButton({ name: "button-c", label: "Button C" }); // This makes a new button named button-c, on the remote its shown as Button C actualDriverObject.addButton({ name: "button-d", label: "Button D" }); // This makes a new button named button-d, on the remote its shown as Button D actualDriverObject.addButton({ name: "button-e", label: "Button E" }); // This makes a new button named button-d, on the remote its shown as Button E actualDriverObject.addButton({ name: "button-f", label: "Button F" }); // This makes a new button named button-d, on the remote its shown as Button F actualDriverObject.addButton({ name: "button-g", label: "Button G" }); // This makes a new button named button-d, on the remote its shown as Button G actualDriverObject.addButton({ name: "button-h", label: "Button H" }); // This makes a new button named button-d, on the remote its shown as Button H actualDriverObject.addSwitch({ name: 'Schalter', label: 'Schalter' },{ setter: (deviceId, newValue) => { switchState = newValue; if (newValue) { http("http://192.168.1.15:8087/set/javascript.0.Eigene_Datenpunkte.Neeo-Switch?value=wahr") } else { http("http://192.168.1.15:8087/set/javascript.0.Eigene_Datenpunkte.Neeo-Switch?value=falsch") } }, // Here is the code that gets executed when a button is pressed. actualDriverObject.addButtonHandler((buttonName, deviceId) => { console.log(`[CONTROLLER] ${buttonName} button pressed`); if (buttonName == "button-a") { http("http://192.168.1.15:8087/set/javascript.0.Eigene_Datenpunkte.Neeo-Button?value=A"); //Just sneds a http get, use this to controll devices that supports a http get } if (buttonName == "button-b") { http("http://192.168.1.15:8087/set/javascript.0.Eigene_Datenpunkte.Neeo-Button?value=B"); } if (buttonName == "button-c") { http("http://192.168.1.15:8087/set/javascript.0.Eigene_Datenpunkte.Neeo-Button?value=C"); } if (buttonName == "button-d") { http("http://192.168.1.15:8087/set/javascript.0.Eigene_Datenpunkte.Neeo-Button?value=D"); } if (buttonName == "button-e") { http("http://192.168.1.15:8087/set/javascript.0.Eigene_Datenpunkte.Neeo-Button?value=E"); } if (buttonName == "button-f") { http("http://192.168.1.15:8087/set/javascript.0.Eigene_Datenpunkte.Neeo-Button?value=F"); } if (buttonName == "button-g") { http("http://192.168.1.15:8087/set/javascript.0.Eigene_Datenpunkte.Neeo-Button?value=G"); } if (buttonName == "button-h") { http("http://192.168.1.15:8087/set/javascript.0.Eigene_Datenpunkte.Neeo-Button?value=H"); } }); // change this to set your NEEO brain IP. change 10.2.1.64 to the IP address of your NEEO brain. const neeoSettings = { brain: "192.168.1.80", port: 1104, name: "eigeneTasten", devices: [actualDriverObject] }; /////////////////////////////////////////////////////////////////////////////////////////////////// // Do not change the code below this point. /////////////////////////////////////////////////////// /////////////////////////////////////////////////////////////////////////////////////////////////// /////////////////////////////////////////////////////////////////////////////////////////////////// // Do not change the code below this point. /////////////////////////////////////////////////////// /////////////////////////////////////////////////////////////////////////////////////////////////// /////////////////////////////////////////////////////////////////////////////////////////////////// // Do not change the code below this point. /////////////////////////////////////////////////////// /////////////////////////////////////////////////////////////////////////////////////////////////// /////////////////////////////////////////////////////////////////////////////////////////////////// // Do not change the code below this point. /////////////////////////////////////////////////////// /////////////////////////////////////////////////////////////////////////////////////////////////// neeoapi .startServer(neeoSettings) .then(() => { console.log("# READY! use the NEEO app to search for: " + actualDriverObject.devicename); if (actualDriverObject.type == "ACCESSOIRE") { console.log("\r\n ACCESOIRE devices do not have their own recipy slides."); console.log(" You need to add the buttons as shortcuts to an existing device slide,"); console.log(" add a dummy device (search for dummy) and add the buttons as shortcut there or"); console.log(" change the actualDriverObject.setType line to present this driver as a different device type."); } }) .catch(err => { console.error("ERROR!", err); process.exit(1); }); -
@mickym sagte in Befehle von Neeo nach ioBroker senden:
actualDriverObject.addSwitch({ name: 'Schalter', label: 'Schalter' },{ setter: (deviceId, newValue) => { switchState = newValue; http("http://192.168.1.15:8087/set/javascript.0.Eigene_Datenpunkte.Neeo-Switch?value=" + newValue); }, getter: (deviceId) => switchState,})Das hier geht, oder? Wenn du etwas änderst, musst du immer schauen, dass die öffnenden und schliessenden Klammern (rund, geschweift, eckig) übereinstimmen.
Ergo sollte es IMHO heissen:
actualDriverObject.addSwitch({ name: 'Schalter', label: 'Schalter' },{ setter: (deviceId, newValue) => { switchState = newValue; if (newValue) { http("http://192.168.1.15:8087/set/javascript.0.Eigene_Datenpunkte.Neeo-Switch?value=wahr" } else { http("http://192.168.1.15:8087/set/javascript.0.Eigene_Datenpunkte.Neeo-Switch?value=falsch" } }, getter: (deviceId) => switchState,}) -
@UncleSam Gemäss Fehler beim vorherigen Laden des Treibers liegt der Fehler vermutlich an einem anderen Ort?
Zeilen 28 und 29 von index.js
// Here is the code that gets executed when a button is pressed. actualDriverObject.addButtonHandler((buttonName, deviceId) => { -
@Kusi Wenn Zeichen fehlen auf den vorherigen Zeilen, kann es sehr gut sein, dass der Fehler erst auf der nächsten Code-Zeile "zum Vorschein" kommt.
-
@UncleSam Aus meiner Sicht fehlt irgendwo eine schliessende Klammer, denn die Öffnende ist bei
actualDriverObject.addSwitch(Woher weis die If-Schleife eigentlich, ob der Wert/Schalter true oder false isch?
-
@UncleSam sagte in Befehle von Neeo nach ioBroker senden:
Ergo sollte es IMHO heissen:
actualDriverObject.addSwitch({ name: 'Schalter', label: 'Schalter' },{ setter: (deviceId, newValue) => { switchState = newValue; if (newValue) { http("http://192.168.1.15:8087/set/javascript.0.Eigene_Datenpunkte.Neeo-Switch?value=wahr" } else { http("http://192.168.1.15:8087/set/javascript.0.Eigene_Datenpunkte.Neeo-Switch?value=falsch" } }, getter: (deviceId) => switchState,})Genau. Zeile 10.
-
@UncleSam Das ist jetzt die Antwort beim Treiber-Start:
pi@raspberrypi:~ $ node /home/pi/node_modules/neeo_driver-test /home/pi/node_modules/neeo_driver-test/index.js:25 http("http://192.168.1.15:8087/set/javascript.0.Eigene_Datenpunkte.Neeo-Switch?value=wahr" ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ SyntaxError: missing ) after argument list at wrapSafe (internal/modules/cjs/loader.js:1053:16) at Module._compile (internal/modules/cjs/loader.js:1101:27) at Object.Module._extensions..js (internal/modules/cjs/loader.js:1157:10) at Module.load (internal/modules/cjs/loader.js:985:32) at Function.Module._load (internal/modules/cjs/loader.js:878:14) at Function.executeUserEntryPoint [as runMain] (internal/modules/run_main.js:71:12) at internal/main/run_main_module.js:17:47Klammer fehlten!
-
@Kusi sagte in Befehle von Neeo nach ioBroker senden:
Woher weis die If-Schleife eigentlich, ob der Wert/Schalter true oder false isch?
if (newValue)überprüft den übergebenen neuen Wert, wenn dertrue(oder etwas ähnliches) ist, wird das erste ausgeführt, sonst das zweite. -
Sorry, falsches korrigiert:
actualDriverObject.addSwitch({ name: 'Schalter', label: 'Schalter' },{ setter: (deviceId, newValue) => { switchState = newValue; if (newValue) { http("http://192.168.1.15:8087/set/javascript.0.Eigene_Datenpunkte.Neeo-Switch?value=wahr"); } else { http("http://192.168.1.15:8087/set/javascript.0.Eigene_Datenpunkte.Neeo-Switch?value=falsch"); } }, getter: (deviceId) => switchState,}) -
@UncleSam Wie beende ich denn jetzt den Treiber, ohne dass ich den Raspi neu starten muss??
pi@raspberrypi:~ $ node /home/pi/node_modules/neeo_driver-test # READY! use the NEEO app to search for: ioBroker ACCESOIRE devices do not have their own recipy slides. You need to add the buttons as shortcuts to an existing device slide, add a dummy device (search for dummy) and add the buttons as shortcut there or change the actualDriverObject.setType line to present this driver as a different device type. -
@Kusi Ctrl-C in dem Putty-Fenster in dem der driver läuft.
-
@UncleSam sagte in Befehle von Neeo nach ioBroker senden:
@Kusi Ctrl-C in dem Putty-Fenster in dem der driver läuft.
Danke.
Laden des Treibers funktioniert, jedoch ändert der DP nicht.
-
@UncleSam sagte in Befehle von Neeo nach ioBroker senden:
@Kusi Ctrl-C in dem Putty-Fenster in dem der driver läuft.
Gibt es auch eine Möglichkeit den Treiber zu stoppen, wenn dieser als Java aus ioBroker gestartet wird?
