Gosund SP1 auf Tasmota - Keine Aktualisierung

crunchip

@Ralla66 wenn sonoff frisch geflasht wird, ist 1883 voreingestellt

Ralla66

Ne mqtt Adapter hat default 1883.
Sonoff nicht die Frage klar auch 1883.

Master67

@crunchip sagte in Gosund SP1 auf Tasmota - Keine Aktualisierung:

@Master67 nochmal von vorne
welche Adapter hast du im gebrauch?
welche Geräte mit welcher Software?
shelly, wenn über mqtt Port 1882
sonoff hat Standard den port 1883
Mqtt hat Standard 1885

und @Ralla66 Ralla66.... ja genau Default 1883 Sonoff.... diesen Bescheuerten "mqtt-client" Adapert hatte ich mal vor einem Jahr installiert, bitte Fragt nicht warum ich weiß es auch nicht mehr so genau, aber was ich mir damals davon erhofft hatte klappte nicht und deshalb war er deaktiviert.

Ich glaube ich hatte den jetzt wieder kurz Aktiviert weil die Daten sich nicht geändert hatten... und sicher, dafür kenne ich mich zu gut hatte ich dann da den Port von 1885 auf 1883 geändert... was ja auch nicht Hilft, darum habe ich den mqtt Adapter auch wieder "deaktiviert"....

Master67

@crunchip sagte in Gosund SP1 auf Tasmota - Keine Aktualisierung:

@Master67 sagte in Gosund SP1 auf Tasmota - Keine Aktualisierung:

zwei Jahren kein Probleme mit dem Port 1883

dann ist doch gut, wenn du alles mit sonoff laufen hast, musst du nach dem flashen, dein Gerät aufrufen, deine host ip und Port 1883 angegeben,fertig. Deinen mqtt Adapter stellst auf 1885 und gut is

Wir verrennen uns jetzt, es geht nur um die 3 Gosund die nicht die Werte Aktualisieren und dort läuft Defaltu Sonoff mqtt mit Port 1883 drauf

Ralla66

@Master67
Dann schau in der Tasmota Console nach ob Mqtt überhaupt sendet.

sonoff 11111.jpg

crunchip

@Ralla66 hast recht, ist schon lange her , hatte damals meinen sonoff auf 1885 eingerichtet

MQTT
Port - Port where the server will run (Default 1883). WebSockets will always run on port+1 (Default 1884)

Master67

@Ralla66 sagte in Gosund SP1 auf Tasmota - Keine Aktualisierung:

@Master67
Dann schau in der Tasmota Console nach ob Mqtt überhaupt sendet.

Okay.... was muss ich Eingeben um das zu sehen?

Ralla66

@Master67
Auf einen Tasmota SP1 gehen, im Hauptmenue Konsole anklicken.

fred 111.jpg

Master67

@Ralla66 sagte in Gosund SP1 auf Tasmota - Keine Aktualisierung:

@Master67
Auf einen Tasmota SP1 gehen, im Hauptmenue Konsole anklicken.

..... ja das war mir klar.... aber bei mir sieht das für den SP1 so aus (ich schau mir gleich noch die "echten" Sonoffs an)

21:30:07 MQT: stat/%topic%/STATUS3 = {"StatusLOG":{"SerialLog":2,"WebLog":2,"MqttLog":0,"SysLog":0,"LogHost":"","LogPort":514,"SSId":["FRITZ!Box Fon WLAN 7360 SL","FRITZ!Box 6591 Cable MF"],"TelePeriod":0,"Resolution":"558180C0","SetOption":["00008009","2805C8000100060000005A00000000000000","00000000","00006000"]}}
21:30:07 MQT: stat/%topic%/STATUS4 = {"StatusMEM":{"ProgramSize":593,"Free":408,"Heap":23,"ProgramFlashSize":1024,"FlashSize":1024,"FlashChipId":"144051","FlashFrequency":40,"FlashMode":3,"Features":["00000407","8FDAE797","04368001","000000CD","010013C0","C000F981","00004004"],"Drivers":"1,2,3,4,5,6,7,8,9,10,12,16,18,19,20,21,22,24,26,27,29,30,35,37","Sensors":"1,2,3,4,5,6"}}
21:30:07 MQT: stat/%topic%/STATUS5 = {"StatusNET":{"Hostname":"%topic%-0076","IPAddress":"192.168.178.XX","Gateway":"192.168.178.1","Subnetmask":"255.255.255.0","DNSServer":"192.168.178.xx","Mac":"F4:CF:A2:08:E0:4C","Webserver":2,"WifiConfig":2,"WifiPower":17.0}}
21:30:07 MQT: stat/%topic%/STATUS6 = {"StatusMQT":{"MqttHost":"192.168.178.XX","MqttPort":1883,"MqttClientMask":"Sonoff-HomeLab","MqttClient":"Sonoff-HomeLab","MqttUser":"olaf.himmelberg@XXX.com","MqttCount":2,"MAX_PACKET_SIZE":1200,"KEEPALIVE":30}}
21:30:07 MQT: stat/%topic%/STATUS7 = {"StatusTIM":{"UTC":"2020-09-14T20:30:07","Local":"2020-09-14T21:30:07","StartDST":"2020-03-29T02:00:00","EndDST":"2020-10-25T03:00:00","Timezone":"+01:00","Sunrise":"06:26","Sunset":"19:04"}}
21:30:07 MQT: stat/%topic%/STATUS9 = {"StatusPTH":{"PowerDelta":0,"PowerLow":0,"PowerHigh":0,"VoltageLow":0,"VoltageHigh":0,"CurrentLow":0,"CurrentHigh":0}}
21:30:07 MQT: stat/%topic%/STATUS10 = {"StatusSNS":{"Time":"2020-09-14T21:30:07","ENERGY":{"TotalStartTime":"2020-09-10T13:07:47","Total":56.608,"Yesterday":13.314,"Today":11.922,"Period":1,"Power":532,"ApparentPower":594,"ReactivePower":263,"Factor":0.90,"Voltage":226,"Current":2.630}}}
21:30:07 MQT: stat/%topic%/STATUS11 = {"StatusSTS":{"Time":"2020-09-14T21:30:07","Uptime":"3T05:13:48","UptimeSec":278028,"Heap":23,"SleepMode":"Dynamic","Sleep":50,"LoadAvg":19,"MqttCount":2,"POWER":"ON","Wifi":{"AP

Master67

@Master67 hier mal eine geflashte SWA1... Läuft schon sehr lange so

t":514,"SSId":["FRITZ!Box 6490 Cable","FRITZ!Box 6591 Cable MF"],"TelePeriod":300,"Resolution":"558180C0","SetOption":["00008009","2805C8000100060000005A00000000000000","00000000","00006000"]}}
21:39:03 MQT: Sonoff-LampeBüro/STATUS4 = {"StatusMEM":{"ProgramSize":593,"Free":408,"Heap":21,"ProgramFlashSize":1024,"FlashSize":1024,"FlashChipId":"1440A1","FlashFrequency":40,"FlashMode":3,"Features":["00000407","8FDAE797","04368001","000000CD","010013C0","C000F981","00004004"],"Drivers":"1,2,3,4,5,6,7,8,9,10,12,16,18,19,20,21,22,24,26,27,29,30,35,37","Sensors":"1,2,3,4,5,6"}}
21:39:03 MQT: Sonoff-LampeBüro/STATUS5 = {"StatusNET":{"Hostname":"Sonoff-Lampe Büro","IPAddress":"192.168.178.27","Gateway":"192.168.178.1","Subnetmask":"255.255.255.0","DNSServer":"192.168.178.XX","Mac":"DC:4F:22:24:AA:1F","Webserver":2,"WifiConfig":4,"WifiPower":17.0}}
21:39:03 MQT: Sonoff-LampeBüro/STATUS6 = {"StatusMQT":{"MqttHost":"192.168.178.31","MqttPort":1883,"MqttClientMask":"Sonoff-Lampe Büro","MqttClient":"Sonoff-Lampe Büro","MqttUser":"olaf.himmelberg@me.com","MqttCount":42,"MAX_PACKET_SIZE":1200,"KEEPALIVE":30}}
21:39:03 MQT: Sonoff-LampeBüro/STATUS7 = {"StatusTIM":{"UTC":"2020-09-14T20:39:03","Local":"2020-09-14T21:39:03","StartDST":"2020-03-29T02:00:00","EndDST":"2020-10-25T03:00:00","Timezone":"+01:00","Sunrise":"06:26","Sunset":"19:04"}}
21:39:03 MQT: Sonoff-LampeBüro/STATUS10 = {"StatusSNS":{"Time":"2020-09-14T21:39:03"}}
21:39:03 MQT: Sonoff-LampeBüro/STATUS11 = {"StatusSTS":{"Time":"2020-09-14T21:39:03","Uptime":"13T06:28:34","UptimeSec":1146514,"Heap":21,"SleepMode":"Dynamic","Sleep":50,"LoadAvg":19,"MqttCount":42,"POWER":"ON","Wifi":{"AP":2,"SSId":"FRITZ!Box 6591 Cable MF","BSSId":"3C:A6:2F:34:6C:41","Channel":11,"RSSI":100,"Signal":-48,"LinkCount":17,"Downtime":"0T00:01:05"}}}
21:39:19 MQT: Sonoff-LampeBüro/STATUS6 = {"StatusMQT":{"MqttHost":"192.168.178.31","MqttPort":1883,"MqttClientMask":"Sonoff-Lampe Büro","MqttClient":"Sonoff-Lampe Büro","MqttUser":"olaf.himmelberg@XX.com","MqttCount":42,"MAX_PACKET_SIZE":1200,"KEEPALIVE":30}}
21:39:19 MQT: Sonoff-LampeBüro/STATUS7 = {"StatusTIM":{"UTC":"2020-09-14T20:39:19","Local":"2020-09-14T21:39:19","StartDST":"2020-03-29T02:00:00","EndDST":"2020-10-25T03:00:00","Timezone":"+01:00","Sunrise":"06:26","Sunset":"19:04"}}
21:39:19 MQT: Sonoff-LampeBüro/STATUS10 = {"StatusSNS":{"Time":"2020-09-14T21:39:19"}}
21:39:19 MQT: Sonoff-LampeBüro/STATUS11 = {"StatusSTS":{"Time":"2020-09-14T21:39:19","Uptime":"13T06:28:50","UptimeSec":1146530,"Heap":23,"SleepMode":"Dynamic","Sleep":50,"LoadAvg":19,"MqttCount":42,"POWER":"ON","Wifi":{"AP":2,"SSId":"FRITZ!Box 6591 Cable MF","BSSId":"3C:A6:2F:34:6C:41","Channel":11,"RSSI":100,"Signal":-49,"LinkCount":17,"Downtime":"0T00:01:05"}}}
21:39:27 MQT: Sonoff-LampeBüro/STATUS = {"Status":{"Module":18,"DeviceName":"Sonoff-Lampe Büro","FriendlyName":["Sonoff-Lampe Büro"],"Topic":"Sonoff-Lampe_Büro","ButtonTopic":"0","Power":1,"PowerOnState":3,"LedState":1,"LedMask":"FFFF","SaveData":1,"SaveState":1,"SwitchTopic":"0","SwitchMode":[0,0,0,0,0,0,0,0],"ButtonRetain":0,"SwitchRetain":0,"SensorRetain":0,"PowerRetain":0}}
21:39:27 MQT: Sonoff-LampeBüro/STATUS1 = {"StatusPRM":{"Baudrate":115200,"SerialConfig":"8N1","GroupTopic":"tasmotas","OtaUrl":"http://thehackbox.org/tasmota/release/tasmota.bin","RestartReason":"Software/System restart","Uptime":"13T06:28:58","StartupUTC":"2020-09-01T14:10:29","Sleep":50,"CfgHolder":4617,"BootCount":9,"BCResetTime":"2020-08-23T10:59:38","SaveCount":122,"SaveAddress":"FA000"}}
21:39:27 MQT: Sonoff-LampeBüro/STATUS2 = {"StatusFWR":{"Version":"8.4.0(tasmota)","BuildDateTime":"2020.07.29 12:19:21","Boot":31,"Core":"2_7_2_1","SDK":"2.2.2-dev(38a443e)","CpuFrequency":80,"Hardware":"ESP8266EX","CR":"508/699"}}
21:39:27 MQT: Sonoff-LampeBüro/STATUS3 = {"StatusLOG":{"SerialLog":2,"WebLog":2,"MqttLog":0,"SysLog":0,"LogHost":"","LogPort":514,"SSId":["FRITZ!Box 6490 Cable","FRITZ!Box 6591 Cable MF"],"TelePeriod":300,"Resolution":"558180C0","SetOption":["00008009","2805C8000100060000005A00000000000000","00000000","00006000"]}}
21:39:27 MQT: Sonoff-LampeBüro/STATUS4 = {"StatusMEM":{"ProgramSize":593,"Free":408,"Heap":23,"ProgramFlashSize":1024,"FlashSize":1024,"FlashChipId":"1440A1","FlashFrequency":40,"FlashMode":3,"Features":["00000407","8FDAE797","04368001","000000CD","010013C0","C000F981","00004004"],"Drivers":"1,2,3,4,5,6,7,8,9,10,12,16,18,19,20,21,22,24,26,27,29,30,35,37","Sensors":"1,2,3,4,5,6"}}
21:39:27 MQT: Sonoff-LampeBüro/STATUS5 = {"StatusNET":{"Hostname":"Sonoff-Lampe Büro","IPAddress":"192.168.178.27","Gateway":"192.168.178.1","Subnetmask":"255.255.255.0","DNSServer":"192.168.178.XX","Mac":"DC:4F:22:24:AA:1F","Webserver":2,"WifiConfig":4,"WifiPower":17.0}}
21:39:27 MQT: Sonoff-LampeBüro/STATUS6 = {"StatusMQT":{"MqttHost":"192.168.178.XX","MqttPort":1883,"MqttClientMask":"Sonoff-Lampe Büro","MqttClient":"Sonoff-Lampe Büro","MqttUser":"olaf.himmelberg@me.com","MqttCount":42,"MAX_PACKET_SIZE":1200,"KEEPALIVE":30}}
21:39:27 MQT: Sonoff-LampeBüro/STATUS7 = {"StatusTIM":{"UTC":"2020-09-14T20:39:27","Local":"2020-09-14T21:39:27","StartDST":"2020-03-29T02:00:00","EndDST":"2020-10-25T03:00:00","Timezone":"+01:00","Sunrise":"06:26","Sunset":"19:04"}}
21:39:27 MQT: Sonoff-LampeBüro/STATUS10 = {"StatusSNS":{"Time":"2020-09-14T21:39:27"}}
21:39:27 MQT: Sonoff-LampeBüro/STATUS11 = {"StatusSTS":{"Time":"2020-09-14T21:39:27","Uptime":"13T06:28:58","UptimeSec":1146538,"Heap":23,"SleepMode":"Dynamic","Sleep":50,"LoadAvg":19,"MqttCount":42,"POWER":"ON","Wifi":{"AP":2,"SSId":"FRITZ!Box 6591 Cable MF","BSSId":"3C:A6:2F:34:6C:41","Channel":11,"RSSI":100,"Signal":-49,"LinkCount":17,"Downtime":"0T00:01:05"}}}

crunchip

@Master67 und du hast immer noch TelePeriod 0

Master67

@Master67 ..... und hier mal die von mir zurückgesetzte SP1... aber das, selbst mit dem "Finger Weg" Teil sieht nicht anders aus!

21:44:47 MQT: stat/tasmota_D03663/STATUS10 = {"StatusSNS":{"Time":"2020-09-14T21:44:47","ENERGY":{"TotalStartTime":"2020-09-11T15:00:47","Total":0.496,"Yesterday":0.016,"Today":0.015,"Power":1,"ApparentPower":3,"ReactivePower":3,"Factor":0.24,"Voltage":230,"Current":0.011}}}
21:44:47 MQT: stat/tasmota_D03663/STATUS11 = {"StatusSTS":{"Time":"2020-09-14T21:44:47","Uptime":"3T04:31:43","UptimeSec":275503,"Heap":23,"SleepMode":"Dynamic","Sleep":50,"LoadAvg":19,"MqttCount":1,"POWER":"ON","Wifi":{"AP":1,"SSId":"FRITZ!Box Fon WLAN 7360 SL","BSSId":"9C:C7:A6:63:34:50","Channel":13,"RSSI":54,"Signal":-73,"LinkCount":1,"Downtime":"0T00:00:03"}}}
21:44:55 MQT: stat/tasmota_D03663/STATUS = {"Status":{"Module":55,"DeviceName":"Sonoff-Kino","FriendlyName":["Sonoff-Kino"],"Topic":"tasmota_D03663","ButtonTopic":"0","Power":1,"PowerOnState":3,"LedState":1,"LedMask":"FFFF","SaveData":1,"SaveState":1,"SwitchTopic":"0","SwitchMode":[0,0,0,0,0,0,0,0],"ButtonRetain":0,"SwitchRetain":0,"SensorRetain":0,"PowerRetain":0}}
21:44:55 MQT: stat/tasmota_D03663/STATUS1 = {"StatusPRM":{"Baudrate":115200,"SerialConfig":"8N1","GroupTopic":"tasmotas","OtaUrl":"http://thehackbox.org/tasmota/release/tasmota.bin","RestartReason":"Power On","Uptime":"3T04:31:51","StartupUTC":"2020-09-11T16:13:04","Sleep":50,"CfgHolder":4617,"BootCount":21,"BCResetTime":"2020-09-11T15:00:47","SaveCount":60,"SaveAddress":"F8000"}}
21:44:55 MQT: stat/tasmota_D03663/STATUS2 = {"StatusFWR":{"Version":"8.4.0(tasmota)","BuildDateTime":"2020.07.29 12:19:21","Boot":31,"Core":"2_7_2_1","SDK":"2.2.2-dev(38a443e)","CpuFrequency":80,"Hardware":"ESP8285","CR":"476/699"}}
21:44:55 MQT: stat/tasmota_D03663/STATUS3 = {"StatusLOG":{"SerialLog":2,"WebLog":2,"MqttLog":0,"SysLog":0,"LogHost":"","LogPort":514,"SSId":["FRITZ!Box Fon WLAN 7360 SL","FRITZ!Box 6591 Cable MF"],"TelePeriod":0,"Resolution":"558180C0","SetOption":["00008009","2805C8000100060000005A00000000000000","00000000","00006000"]}}
21:44:55 MQT: stat/tasmota_D03663/STATUS4 = {"StatusMEM":{"ProgramSize":593,"Free":408,"Heap":21,"ProgramFlashSize":1024,"FlashSize":1024,"FlashChipId":"144051","FlashFrequency":40,"FlashMode":3,"Features":["00000407","8FDAE797","04368001","000000CD","010013C0","C000F981","00004004"],"Drivers":"1,2,3,4,5,6,7,8,9,10,12,16,18,19,20,21,22,24,26,27,29,30,35,37","Sensors":"1,2,3,4,5,6"}}
21:44:55 MQT: stat/tasmota_D03663/STATUS5 = {"StatusNET":{"Hostname":"tasmota_D03663-5731","IPAddress":"192.168.178.xx","Gateway":"192.168.178.xx","Subnetmask":"255.255.255.0","DNSServer":"192.168.178.xx","Mac":"DC:4F:22:D0:36:63","Webserver":2,"WifiConfig":4,"WifiPower":17.0}}
21:44:55 MQT: stat/tasmota_D03663/STATUS6 = {"StatusMQT":{"MqttHost":"192.168.178.31","MqttPort":1883,"MqttClientMask":"Sonoff-Kino","MqttClient":"Sonoff-Kino","MqttUser":"olaf.himmelberg@xx.com","MqttCount":1,"MAX_PACKET_SIZE":1200,"KEEPALIVE":30}}
21:44:55 MQT: stat/tasmota_D03663/STATUS7 = {"StatusTIM":{"UTC":"2020-09-14T20:44:55","Local":"2020-09-14T21:44:55","StartDST":"2020-03-29T02:00:00","EndDST":"2020-10-25T03:00:00","Timezone":"+01:00","Sunrise":"06:26","Sunset":"19:04"}}
21:44:55 MQT: stat/tasmota_D03663/STATUS9 = {"StatusPTH":{"PowerDelta":0,"PowerLow":0,"PowerHigh":0,"VoltageLow":0,"VoltageHigh":0,"CurrentLow":0,"CurrentHigh":0}}

Master67

@crunchip sagte in Gosund SP1 auf Tasmota - Keine Aktualisierung:

@Master67 und du hast immer noch TelePeriod 0

Ja.... ich kann es auch direkt umstelle... soll ich 10 oder 300 versuchen, bei der SWA1 (die läuft) ist es 300!

crunchip

@Master67 zur Verbrauchsmessung brauchste schon 10....5min is sinnfrei

Ralla66

@Master67
du bekommst Status und keine Tele Daten.
Da haste was verbogen.
Geh kurz im Sonoff Adapter auf Port 1885 PW anpassen usw.
Gleiche in Tasmota.
Tele setze 10.
Dann Sonoff Adapter neu starten, dann müssen Tele Daten da sein.

Master67

@Ralla66 .. @crunchip ..... erst mal Danke für euren Einsatz.... ich glaube ich dreh am Rad.... ich hab das wieder auf TelePeriod 10 gestellt (ich musste es nicht mal eintippen.. war noch in der Konsole gespeichert), bin dann (so wie beim erste mal auch) in die Objekte rein und konnte den Aktualisierungen zuschauen!

Also es läuft..... aber ehrlich ich weis nicht warum.... ich kann schon die "Aktualisierungen" erkennen weil "Grün".... aber das war vor zwei Tagen nicht so.... Puh.... was für ein Stress wegen eigentlich nichts.

Aber danke an euch, das ihr da nicht nachgelassen habt

Also setzten wir das mal auf gelöst...

Ralla66

@Master67
Prima das es dir geholfen hat.
Geh aber mit Tasmota auf Port 1885.
Einfach Konflikte der Standartports vermeiden.

Master67

@Ralla66 sagte in Gosund SP1 auf Tasmota - Keine Aktualisierung:

@Master67
Prima das es dir geholfen hat.
Geh aber mit Tasmota auf Port 1885.
Einfach Konlikte der Standartports vermeiden.

Kann ich machen, ist da beim Tasmota kein großer Aufwand

Malz1902

Ich nutze seit nem halben Jahr Port 1883 mqtt und Port 1884 sonoff, ohne Probleme bisher

NEWS

Gosund SP1 auf Tasmota - Keine Aktualisierung

Support us

814
Online

31.9k
Users

80.2k
Topics

1.3m
Posts

NEWS

Gosund SP1 auf Tasmota - Keine Aktualisierung

Support us

814Online

31.9kUsers

80.2kTopics

1.3mPosts

814
Online

31.9k
Users

80.2k
Topics

1.3m
Posts