Adapter "iobroker.nut" - UPS Daten im iobroker

apollon77

Aaaahh … das ist wahr. Meines Wissens nach Fragt übrigens nur das nur alle 3 Minuten oder so ab ... also musst mal schauen wie sich da wirklich was ändert falls was ist ...

Ich plane eh gerade Umbau als Deamon das man noch die NUT-Notifies auch dahin melden kann und der Adapter darauf reagieren kann. Dann ändert sich das eh .

apollon77

So, jetzt bin ich soweit.

Es gibt eine neue Version des NUT Adapters auf Github. Die News sind:

Adapter läuft jetzt als Deamon. Das Anfrageintervall kann in der Adapter-Konfiguration in Sekunden eingestellt werden. Üblicherweise aktualisiert NUT z.B. bei APC alle 3 Minuten.
Ich habe das "status.severity" so gelassen wie oben im Thread beschrieben
Adapter kann nun Messages für Notifies empfangen und ein Beispielscript für upsmon ist mit dabei. Mehr Infos auf der Github-Seite.

Bevor ich es offiziell veröffentliche wäre es super wenn Ihr es ausprobieren würdet/könntet.

Danke!

Ingo F

rascal

hey,

blöde Frage: Wie?

im iobroker scheint der bei "Installieren aus eigenem URL" nicht auf, und mit "https://github.com/Apollon77/ioBroker.nut.git" bricht er mit der Fehlermeldung ab:

$ ./iobroker url "https://github.com/Apollon77/ioBroker.nut.git"
install https://github.com/Apollon77/ioBroker.nut.git/tarball/master
npm install https://github.com/Apollon77/ioBroker.nut.git/tarball/master --production --prefix "/opt/iobroker" (System call)
npm 
ERR! fetch failed https://github.com/Apollon77/ioBroker.nut.git/tarball/master
npm WARN retry will retry, error on last attempt: Error: fetch failed with status code 404

Homoran

~~@rascal:~~

blöde Frage: Wie? `

Pfad für Installation aus eigenem Repo über den admin wäre IMHO:

https://github.com/Apollon77/ioBroker.nut

Gruß

Rainer

rascal

hey,

ich dachte, man muss das Intervall nun in den Adaptereinstellungen angeben, aber er fragt nach wie vor nach dem schedule:

system-adapter-nut-0	2016-10-03 15:02:35.012	error	schedule attribute missing
host-Mastermind	2016-10-03 15:02:32.510	warn	stopInstance system.adapter.nut.0 not scheduled
host-Mastermind	2016-10-03 15:02:32.509	info	stopInstance system.adapter.nut.0

der Adapter funktioniert nur, wenn man im Schedule die Werte eingibt, mit dem Wert im Adapter setup fängter er nichts an.

Ebenfalls schreibt er nun einiges mehr in das Log:

nut.0	2016-10-03 15:06:51.561	debug	host. redis publish io.nut.0.status.bypass {"val":false,"ack":true,"ts":1475500011533,"q":0,"from":"system.adapter.nut.0","lc":1472998201460}
nut.0	2016-10-03 15:06:51.561	debug	host. redis publish io.nut.0.status.discharging {"val":false,"ack":true,"ts":1475500011533,"q":0,"from":"system.adapter.nut.0","lc":1475167426054}
nut.0	2016-10-03 15:06:51.560	debug	host. redis publish io.nut.0.status.charging {"val":false,"ack":true,"ts":1475500011533,"q":0,"from":"system.adapter.nut.0","lc":1475169226032}
nut.0	2016-10-03 15:06:51.560	debug	host. redis publish io.nut.0.status.replacebattery {"val":false,"ack":true,"ts":1475500011532,"q":0,"from":"system.adapter.nut.0","lc":1472998201459}
nut.0	2016-10-03 15:06:51.560	debug	host. redis publish io.nut.0.status.highbattery {"val":false,"ack":true,"ts":1475500011532,"q":0,"from":"system.adapter.nut.0","lc":1472998201459}
nut.0	2016-10-03 15:06:51.560	debug	host. redis publish io.nut.0.status.lowbattery {"val":false,"ack":true,"ts":1475500011532,"q":0,"from":"system.adapter.nut.0","lc":1474118700977}
nut.0	2016-10-03 15:06:51.560	debug	host. redis publish io.nut.0.status.onbattery {"val":false,"ack":true,"ts":1475500011531,"q":0,"from":"system.adapter.nut.0","lc":1475167426048}
nut.0	2016-10-03 15:06:51.560	debug	host. redis publish io.nut.0.status.online {"val":true,"ack":true,"ts":1475500011531,"q":0,"from":"system.adapter.nut.0","lc":1475167426048}
nut.0	2016-10-03 15:06:51.560	debug	host. redis publish io.nut.0.ups.vendorid {"val":"051d","ack":true,"ts":1475500011530,"q":0,"from":"system.adapter.nut.0","lc":1472998201458}
nut.0	2016-10-03 15:06:51.560	debug	host. redis publish io.nut.0.ups.timer-shutdown {"val":"-1","ack":true,"ts":1475500011530,"q":0,"from":"system.adapter.nut.0","lc":1472998201458}
nut.0	2016-10-03 15:06:51.560	debug	host. redis publish io.nut.0.ups.timer-reboot {"val":"0","ack":true,"ts":1475500011530,"q":0,"from":"system.adapter.nut.0","lc":1472998201457}
nut.0	2016-10-03 15:06:51.560	debug	host. redis publish io.nut.0.ups.status {"val":"OL","ack":true,"ts":1475500011529,"q":0,"from":"system.adapter.nut.0","lc":1475169226029}
nut.0	2016-10-03 15:06:51.560	debug	host. redis publish io.nut.0.ups.serial {"val":"5B1349T03604 ","ack":true,"ts":1475500011529,"q":0,"from":"system.adapter.nut.0","lc":1472998201456}
nut.0	2016-10-03 15:06:51.560	debug	host. redis publish io.nut.0.ups.productid {"val":"0002","ack":true,"ts":1475500011529,"q":0,"from":"system.adapter.nut.0","lc":1472998201455}
nut.0	2016-10-03 15:06:51.560	debug	host. redis publish io.nut.0.ups.model {"val":"Back-UPS ES 700G","ack":true,"ts":1475500011528,"q":0,"from":"system.adapter.nut.0","lc":1472998201455}
nut.0	2016-10-03 15:06:51.560	debug	host. redis publish io.nut.0.ups.mfr-date {"val":"2013/12/04","ack":true,"ts":1475500011528,"q":0,"from":"system.adapter.nut.0","lc":1472998201455}
nut.0	2016-10-03 15:06:51.560	debug	host. redis publish io.nut.0.ups.mfr {"val":"APC","ack":true,"ts":1475500011527,"q":0,"from":"system.adapter.nut.0","lc":1472998201454}
nut.0	2016-10-03 15:06:51.559	debug	host. redis publish io.nut.0.ups.load {"val":"28","ack":true,"ts":1475500011527,"q":0,"from":"system.adapter.nut.0","lc":1475167411043}
nut.0	2016-10-03 15:06:51.559	debug	host. redis publish io.nut.0.ups.firmware-aux {"val":"O3 ","ack":true,"ts":1475500011527,"q":0,"from":"system.adapter.nut.0","lc":1472998201454}
nut.0	2016-10-03 15:06:51.559	debug	host. redis publish io.nut.0.ups.firmware {"val":"871.O3 .I","ack":true,"ts":1475500011526,"q":0,"from":"system.adapter.nut.0","lc":1472998201453}
nut.0	2016-10-03 15:06:51.559	debug	host. redis publish io.nut.0.ups.delay-shutdown {"val":"20","ack":true,"ts":1475500011526,"q":0,"from":"system.adapter.nut.0","lc":1472998201452}
nut.0	2016-10-03 15:06:51.559	debug	host. redis publish io.nut.0.ups.beeper-status {"val":"enabled","ack":true,"ts":1475500011525,"q":0,"from":"system.adapter.nut.0","lc":1472998201452}
nut.0	2016-10-03 15:06:51.559	debug	host. redis publish io.nut.0.input.voltage-nominal {"val":"230","ack":true,"ts":1475500011525,"q":0,"from":"system.adapter.nut.0","lc":1472998201448}
nut.0	2016-10-03 15:06:51.559	debug	host. redis publish io.nut.0.input.voltage {"val":"232.0","ack":true,"ts":1475500011525,"q":0,"from":"system.adapter.nut.0","lc":1475499511669}
nut.0	2016-10-03 15:06:51.559	debug	host. redis publish io.nut.0.input.transfer-low {"val":"180","ack":true,"ts":1475500011524,"q":0,"from":"system.adapter.nut.0","lc":1472998201447}
nut.0	2016-10-03 15:06:51.559	debug	host. redis publish io.nut.0.input.transfer-high {"val":"266","ack":true,"ts":1475500011524,"q":0,"from":"system.adapter.nut.0","lc":1472998201447}
nut.0	2016-10-03 15:06:51.559	debug	host. redis publish io.nut.0.input.sensitivity {"val":"medium","ack":true,"ts":1475500011523,"q":0,"from":"system.adapter.nut.0","lc":1472998201447}
nut.0	2016-10-03 15:06:51.559	debug	host. redis publish io.nut.0.driver.version-internal {"val":"0.38","ack":true,"ts":1475500011523,"q":0,"from":"system.adapter.nut.0","lc":1472998201447}
nut.0	2016-10-03 15:06:51.559	debug	host. redis publish io.nut.0.driver.version-data {"val":"APC HID 0.95","ack":true,"ts":1475500011523,"q":0,"from":"system.adapter.nut.0","lc":1472998201446}
nut.0	2016-10-03 15:06:51.559	debug	host. redis publish io.nut.0.driver.version {"val":"2.7.2","ack":true,"ts":1475500011522,"q":0,"from":"system.adapter.nut.0","lc":1472998201446}
nut.0	2016-10-03 15:06:51.559	debug	host. redis publish io.nut.0.driver.parameter-port {"val":"auto","ack":true,"ts":1475500011522,"q":0,"from":"system.adapter.nut.0","lc":1472998201445}
nut.0	2016-10-03 15:06:51.558	debug	host. redis publish io.nut.0.driver.parameter-pollinterval {"val":"2","ack":true,"ts":1475500011522,"q":0,"from":"system.adapter.nut.0","lc":1472998201445}
nut.0	2016-10-03 15:06:51.558	debug	host. redis publish io.nut.0.driver.parameter-pollfreq {"val":"30","ack":true,"ts":1475500011521,"q":0,"from":"system.adapter.nut.0","lc":1472998201445}
nut.0	2016-10-03 15:06:51.558	debug	host. redis publish io.nut.0.driver.name {"val":"usbhid-ups","ack":true,"ts":1475500011521,"q":0,"from":"system.adapter.nut.0","lc":1472998201444}
nut.0	2016-10-03 15:06:51.558	debug	host. redis publish io.nut.0.device.type {"val":"ups","ack":true,"ts":1475500011520,"q":0,"from":"system.adapter.nut.0","lc":1472998201444}
nut.0	2016-10-03 15:06:51.558	debug	host. redis publish io.nut.0.device.serial {"val":"5B1349T03604 ","ack":true,"ts":1475500011520,"q":0,"from":"system.adapter.nut.0","lc":1472998201443}
nut.0	2016-10-03 15:06:51.558	debug	host. redis publish io.nut.0.device.model {"val":"Back-UPS ES 700G","ack":true,"ts":1475500011520,"q":0,"from":"system.adapter.nut.0","lc":1472998201443}
nut.0	2016-10-03 15:06:51.558	debug	host. redis publish io.nut.0.device.mfr {"val":"APC","ack":true,"ts":1475500011519,"q":0,"from":"system.adapter.nut.0","lc":1472998201442}
nut.0	2016-10-03 15:06:51.558	debug	host. redis publish io.nut.0.battery.voltage-nominal {"val":"12.0","ack":true,"ts":1475500011519,"q":0,"from":"system.adapter.nut.0","lc":1472998201442}
nut.0	2016-10-03 15:06:51.558	debug	host. redis publish io.nut.0.battery.voltage {"val":"13.7","ack":true,"ts":1475500011518,"q":0,"from":"system.adapter.nut.0","lc":1475499511664}
nut.0	2016-10-03 15:06:51.558	debug	host. redis publish io.nut.0.battery.type {"val":"PbAc","ack":true,"ts":1475500011518,"q":0,"from":"system.adapter.nut.0","lc":1472998201441}
nut.0	2016-10-03 15:06:51.558	debug	host. redis publish io.nut.0.battery.runtime-low {"val":"120","ack":true,"ts":1475500011518,"q":0,"from":"system.adapter.nut.0","lc":1472998201441}
nut.0	2016-10-03 15:06:51.558	debug	host. redis publish io.nut.0.battery.runtime {"val":"1672","ack":true,"ts":1475500011517,"q":0,"from":"system.adapter.nut.0","lc":1475169241007}
nut.0	2016-10-03 15:06:51.558	debug	host. redis publish io.nut.0.battery.mfr-date {"val":"2013/12/04","ack":true,"ts":1475500011517,"q":0,"from":"system.adapter.nut.0","lc":1472998201440}
nut.0	2016-10-03 15:06:51.558	debug	host. redis publish io.nut.0.battery.date {"val":"not set","ack":true,"ts":1475500011516,"q":0,"from":"system.adapter.nut.0","lc":1472998201440}
nut.0	2016-10-03 15:06:51.558	debug	host. redis publish io.nut.0.battery.charge-warning {"val":"50","ack":true,"ts":1475500011516,"q":0,"from":"system.adapter.nut.0","lc":1472998201440}
nut.0	2016-10-03 15:06:51.557	debug	host. redis publish io.nut.0.battery.charge-low {"val":"10","ack":true,"ts":1475500011516,"q":0,"from":"system.adapter.nut.0","lc":1472998201440}
nut.0	2016-10-03 15:06:51.557	debug	host. redis publish io.nut.0.battery.charge {"val":"100","ack":true,"ts":1475500011515,"q":0,"from":"system.adapter.nut.0","lc":1475169241004}
nut.0	2016-10-03 15:06:51.557	info	nut.0 All Nut values set
nut.0	2016-10-03 15:06:51.557	debug	nut.0 Set State status.severity = 0
nut.0	2016-10-03 15:06:51.557	debug	nut.0 Set State status.shutdown = false
nut.0	2016-10-03 15:06:51.557	debug	nut.0 Create State status.shutdown
nut.0	2016-10-03 15:06:51.557	debug	nut.0 Set State status.boosting = false
nut.0	2016-10-03 15:06:51.557	debug	nut.0 Create State status.boosting
nut.0	2016-10-03 15:06:51.557	debug	nut.0 Set State status.trimming = false
nut.0	2016-10-03 15:06:51.557	debug	nut.0 Create State status.trimming
nut.0	2016-10-03 15:06:51.557	debug	nut.0 Set State status.overload = false
nut.0	2016-10-03 15:06:51.557	debug	nut.0 Create State status.overload
nut.0	2016-10-03 15:06:51.557	debug	nut.0 Set State status.offline = false
nut.0	2016-10-03 15:06:51.557	debug	nut.0 Create State status.offline
nut.0	2016-10-03 15:06:51.556	debug	nut.0 Set State status.calibration = false
nut.0	2016-10-03 15:06:51.556	debug	nut.0 Create State status.calibration
nut.0	2016-10-03 15:06:51.556	debug	nut.0 Set State status.bypass = false
nut.0	2016-10-03 15:06:51.556	debug	nut.0 Create State status.bypass
nut.0	2016-10-03 15:06:51.556	debug	nut.0 Set State status.discharging = false
nut.0	2016-10-03 15:06:51.556	debug	nut.0 Create State status.discharging
nut.0	2016-10-03 15:06:51.556	debug	nut.0 Set State status.charging = false
nut.0	2016-10-03 15:06:51.556	debug	nut.0 Create State status.charging
nut.0	2016-10-03 15:06:51.556	debug	nut.0 Set State status.replacebattery = false
nut.0	2016-10-03 15:06:51.556	debug	nut.0 Create State status.replacebattery
nut.0	2016-10-03 15:06:51.556	debug	nut.0 Set State status.highbattery = false
nut.0	2016-10-03 15:06:51.556	debug	nut.0 Create State status.highbattery
nut.0	2016-10-03 15:06:51.556	debug	nut.0 Set State status.lowbattery = false
nut.0	2016-10-03 15:06:51.556	debug	nut.0 Create State status.lowbattery
nut.0	2016-10-03 15:06:51.555	debug	nut.0 Set State status.onbattery = false
nut.0	2016-10-03 15:06:51.555	debug	nut.0 Create State status.onbattery
nut.0	2016-10-03 15:06:51.555	debug	nut.0 Severity Flag idle=true
nut.0	2016-10-03 15:06:51.555	debug	nut.0 Set State status.online = true
nut.0	2016-10-03 15:06:51.555	debug	nut.0 Create State status.online
nut.0	2016-10-03 15:06:51.555	debug	nut.0 Create Channel status
nut.0	2016-10-03 15:06:51.555	debug	nut.0 Set State ups.vendorid = 051d
nut.0	2016-10-03 15:06:51.555	debug	nut.0 Create State ups.vendorid
nut.0	2016-10-03 15:06:51.555	debug	nut.0 Set State ups.timer-shutdown = -1
nut.0	2016-10-03 15:06:51.555	debug	nut.0 Create State ups.timer-shutdown
nut.0	2016-10-03 15:06:51.555	debug	nut.0 Set State ups.timer-reboot = 0
nut.0	2016-10-03 15:06:51.555	debug	nut.0 Create State ups.timer-reboot
nut.0	2016-10-03 15:06:51.555	debug	nut.0 Set State ups.status = OL
nut.0	2016-10-03 15:06:51.555	debug	nut.0 Create State ups.status
nut.0	2016-10-03 15:06:51.554	debug	nut.0 Set State ups.serial = 5B1349T03604
nut.0	2016-10-03 15:06:51.554	debug	nut.0 Create State ups.serial
nut.0	2016-10-03 15:06:51.554	debug	nut.0 Set State ups.productid = 0002
nut.0	2016-10-03 15:06:51.554	debug	nut.0 Create State ups.productid
nut.0	2016-10-03 15:06:51.554	debug	nut.0 Set State ups.model = Back-UPS ES 700G
nut.0	2016-10-03 15:06:51.554	debug	nut.0 Create State ups.model
nut.0	2016-10-03 15:06:51.554	debug	nut.0 Set State ups.mfr-date = 2013/12/04
nut.0	2016-10-03 15:06:51.554	debug	nut.0 Create State ups.mfr-date
nut.0	2016-10-03 15:06:51.554	debug	nut.0 Set State ups.mfr = APC
nut.0	2016-10-03 15:06:51.554	debug	nut.0 Create State ups.mfr
nut.0	2016-10-03 15:06:51.554	debug	nut.0 Set State ups.load = 28
nut.0	2016-10-03 15:06:51.554	debug	nut.0 Create State ups.load
nut.0	2016-10-03 15:06:51.554	debug	nut.0 Set State ups.firmware-aux = O3
nut.0	2016-10-03 15:06:51.554	debug	nut.0 Create State ups.firmware-aux
nut.0	2016-10-03 15:06:51.553	debug	nut.0 Set State ups.firmware = 871.O3 .I
nut.0	2016-10-03 15:06:51.553	debug	nut.0 Create State ups.firmware
nut.0	2016-10-03 15:06:51.553	debug	nut.0 Set State ups.delay-shutdown = 20
nut.0	2016-10-03 15:06:51.553	debug	nut.0 Create State ups.delay-shutdown
nut.0	2016-10-03 15:06:51.553	debug	nut.0 Set State ups.beeper-status = enabled
nut.0	2016-10-03 15:06:51.553	debug	nut.0 Create State ups.beeper-status
nut.0	2016-10-03 15:06:51.553	debug	nut.0 Create Channel ups
nut.0	2016-10-03 15:06:51.553	debug	nut.0 Set State input.voltage-nominal = 230
nut.0	2016-10-03 15:06:51.553	debug	nut.0 Create State input.voltage-nominal
nut.0	2016-10-03 15:06:51.553	debug	nut.0 Set State input.voltage = 232.0
nut.0	2016-10-03 15:06:51.553	debug	nut.0 Create State input.voltage
nut.0	2016-10-03 15:06:51.553	debug	nut.0 Set State input.transfer-low = 180
nut.0	2016-10-03 15:06:51.553	debug	nut.0 Create State input.transfer-low
nut.0	2016-10-03 15:06:51.553	debug	nut.0 Set State input.transfer-high = 266
nut.0	2016-10-03 15:06:51.552	debug	nut.0 Create State input.transfer-high
nut.0	2016-10-03 15:06:51.552	debug	nut.0 Set State input.sensitivity = medium
nut.0	2016-10-03 15:06:51.552	debug	nut.0 Create State input.sensitivity
nut.0	2016-10-03 15:06:51.552	debug	nut.0 Create Channel input
nut.0	2016-10-03 15:06:51.552	debug	nut.0 Set State driver.version-internal = 0.38
nut.0	2016-10-03 15:06:51.552	debug	nut.0 Create State driver.version-internal
nut.0	2016-10-03 15:06:51.552	debug	nut.0 Set State driver.version-data = APC HID 0.95
nut.0	2016-10-03 15:06:51.552	debug	nut.0 Create State driver.version-data
nut.0	2016-10-03 15:06:51.552	debug	nut.0 Set State driver.version = 2.7.2
nut.0	2016-10-03 15:06:51.552	debug	nut.0 Create State driver.version
nut.0	2016-10-03 15:06:51.552	debug	nut.0 Set State driver.parameter-port = auto
nut.0	2016-10-03 15:06:51.552	debug	nut.0 Create State driver.parameter-port
nut.0	2016-10-03 15:06:51.551	debug	nut.0 Set State driver.parameter-pollinterval = 2
nut.0	2016-10-03 15:06:51.551	debug	nut.0 Create State driver.parameter-pollinterval
nut.0	2016-10-03 15:06:51.551	debug	nut.0 Set State driver.parameter-pollfreq = 30
nut.0	2016-10-03 15:06:51.551	debug	nut.0 Create State driver.parameter-pollfreq
nut.0	2016-10-03 15:06:51.551	debug	nut.0 Set State driver.name = usbhid-ups
nut.0	2016-10-03 15:06:51.551	debug	nut.0 Create State driver.name
nut.0	2016-10-03 15:06:51.551	debug	nut.0 Create Channel driver
nut.0	2016-10-03 15:06:51.551	debug	nut.0 Set State device.type = ups
nut.0	2016-10-03 15:06:51.551	debug	nut.0 Create State device.type
nut.0	2016-10-03 15:06:51.551	debug	nut.0 Set State device.serial = 5B1349T03604
nut.0	2016-10-03 15:06:51.551	debug	nut.0 Create State device.serial
nut.0	2016-10-03 15:06:51.551	debug	nut.0 Set State device.model = Back-UPS ES 700G
nut.0	2016-10-03 15:06:51.550	debug	nut.0 Create State device.model
nut.0	2016-10-03 15:06:51.550	debug	nut.0 Set State device.mfr = APC
nut.0	2016-10-03 15:06:51.550	debug	nut.0 Create State device.mfr
nut.0	2016-10-03 15:06:51.550	debug	nut.0 Create Channel device
nut.0	2016-10-03 15:06:51.550	debug	nut.0 Set State battery.voltage-nominal = 12.0
nut.0	2016-10-03 15:06:51.550	debug	nut.0 Create State battery.voltage-nominal
nut.0	2016-10-03 15:06:51.550	debug	nut.0 Set State battery.voltage = 13.7
nut.0	2016-10-03 15:06:51.550	debug	nut.0 Create State battery.voltage
nut.0	2016-10-03 15:06:51.550	debug	nut.0 Set State battery.type = PbAc
nut.0	2016-10-03 15:06:51.550	debug	nut.0 Create State battery.type
nut.0	2016-10-03 15:06:51.550	debug	nut.0 Set State battery.runtime-low = 120
nut.0	2016-10-03 15:06:51.549	debug	nut.0 Create State battery.runtime-low
nut.0	2016-10-03 15:06:51.549	debug	nut.0 Set State battery.runtime = 1672
nut.0	2016-10-03 15:06:51.549	debug	nut.0 Create State battery.runtime
nut.0	2016-10-03 15:06:51.549	debug	nut.0 Set State battery.mfr-date = 2013/12/04
nut.0	2016-10-03 15:06:51.549	debug	nut.0 Create State battery.mfr-date
nut.0	2016-10-03 15:06:51.549	debug	nut.0 Set State battery.date = not set
nut.0	2016-10-03 15:06:51.549	debug	nut.0 Create State battery.date
nut.0	2016-10-03 15:06:51.549	debug	nut.0 Set State battery.charge-warning = 50
nut.0	2016-10-03 15:06:51.549	debug	nut.0 Create State battery.charge-warning
nut.0	2016-10-03 15:06:51.547	debug	nut.0 Set State battery.charge-low = 10
nut.0	2016-10-03 15:06:51.547	debug	nut.0 Create State battery.charge-low
nut.0	2016-10-03 15:06:51.547	debug	nut.0 Set State battery.charge = 100
nut.0	2016-10-03 15:06:51.547	debug	nut.0 Create State battery.charge
nut.0	2016-10-03 15:06:51.547	debug	nut.0 Create Channel battery
nut.0	2016-10-03 15:06:51.547	debug	nut.0 Got values, start setting them
nut.0	2016-10-03 15:06:51.542	debug	nut.0 NUT Connection ready
nut.0	2016-10-03 15:06:51.541	info	nut.0 Start NUT update
nut.0	2016-10-03 15:06:51.385	debug	host. redis publish io.system.adapter.nut.0.uptime {"val":196,"ack":true,"ts":1475500011384,"q":0,"from":"system.adapter.nut.0","lc":1475500011384}
nut.0	2016-10-03 15:06:51.385	debug	host. redis publish io.system.adapter.nut.0.memHeapUsed {"val":17.8,"ack":true,"ts":1475500011384,"q":0,"from":"system.adapter.nut.0","lc":1475500011384}
nut.0	2016-10-03 15:06:51.385	debug	host. redis publish io.system.adapter.nut.0.memHeapTotal {"val":20.82,"ack":true,"ts":1475500011384,"q":0,"from":"system.adapter.nut.0","lc":1475500011384}
nut.0	2016-10-03 15:06:51.385	debug	host. redis publish io.system.adapter.nut.0.memRss {"val":41.21,"ack":true,"ts":1475500011383,"q":0,"from":"system.adapter.nut.0","lc":1475500011383}
nut.0	2016-10-03 15:06:51.385	debug	host. redis publish io.system.adapter.nut.0.connected {"val":true,"ack":true,"ts":1475500011383,"q":0,"from":"system.adapter.nut.0","lc":1475499816328}
nut.0	2016-10-03 15:06:51.385	debug	host. redis publish io.system.adapter.nut.0.alive {"val":true,"ack":true,"ts":1475500011383,"q":0,"from":"system.adapter.nut.0","lc":1475499816327}
Mastermind	2016-10-03 15:06:50.533	warn	host.Mastermind instance system.adapter.nut.0 already running with pid 14081
nut.0	2016-10-03 15:06:46.578	debug	nut.0 NUT Connection closed. Done.
nut.0	2016-10-03 15:06:46.577	debug	host. redis publish io.nut.0.status.severity {"val":0,"ack":true,"ts":1475500006547,"q":0,"from":"system.adapter.nut.0","lc":1475498551530}
nut.0	2016-10-03 15:06:46.577	debug	host. redis publish io.nut.0.status.shutdown {"val":false,"ack":true,"ts":1475500006547,"q":0,"from":"system.adapter.nut.0","lc":1472998201462}
nut.0	2016-10-03 15:06:46.577	debug	host. redis publish io.nut.0.status.boosting {"val":false,"ack":true,"ts":1475500006546,"q":0,"from":"system.adapter.nut.0","lc":1472998201461}
nut.0	2016-10-03 15:06:46.577	debug	host. redis publish io.nut.0.status.trimming {"val":false,"ack":true,"ts":1475500006546,"q":0,"from":"system.adapter.nut.0","lc":1472998201461}
nut.0	2016-10-03 15:06:46.577	debug	host. redis publish io.nut.0.status.overload {"val":false,"ack":true,"ts":1475500006546,"q":0,"from":"system.adapter.nut.0","lc":1472998201461}
nut.0	2016-10-03 15:06:46.577	debug	host. redis publish io.nut.0.status.offline {"val":false,"ack":true,"ts":1475500006545,"q":0,"from":"system.adapter.nut.0","lc":1472998201461}
nut.0	2016-10-03 15:06:46.577	debug	host. redis publish io.nut.0.status.calibration {"val":false,"ack":true,"ts":1475500006545,"q":0,"from":"system.adapter.nut.0","lc":1472998201460}
nut.0	2016-10-03 15:06:46.577	debug	host. redis publish io.nut.0.status.bypass {"val":false,"ack":true,"ts":1475500006545,"q":0,"from":"system.adapter.nut.0","lc":1472998201460}
nut.0	2016-10-03 15:06:46.577	debug	host. redis publish io.nut.0.status.discharging {"val":false,"ack":true,"ts":1475500006544,"q":0,"from":"system.adapter.nut.0","lc":1475167426054}
nut.0	2016-10-03 15:06:46.577	debug	host. redis publish io.nut.0.status.charging {"val":false,"ack":true,"ts":1475500006544,"q":0,"from":"system.adapter.nut.0","lc":1475169226032}
nut.0	2016-10-03 15:06:46.577	debug	host. redis publish io.nut.0.status.replacebattery {"val":false,"ack":true,"ts":1475500006543,"q":0,"from":"system.adapter.nut.0","lc":1472998201459}
nut.0	2016-10-03 15:06:46.577	debug	host. redis publish io.nut.0.status.highbattery {"val":false,"ack":true,"ts":1475500006543,"q":0,"from":"system.adapter.nut.0","lc":1472998201459}
nut.0	2016-10-03 15:06:46.577	debug	host. redis publish io.nut.0.status.lowbattery {"val":false,"ack":true,"ts":1475500006542,"q":0,"from":"system.adapter.nut.0","lc":1474118700977}
nut.0	2016-10-03 15:06:46.577	debug	host. redis publish io.nut.0.status.onbattery {"val":false,"ack":true,"ts":1475500006542,"q":0,"from":"system.adapter.nut.0","lc":1475167426048}
nut.0	2016-10-03 15:06:46.577	debug	host. redis publish io.nut.0.status.online {"val":true,"ack":true,"ts":1475500006541,"q":0,"from":"system.adapter.nut.0","lc":1475167426048}
nut.0	2016-10-03 15:06:46.576	debug	host. redis publish io.nut.0.ups.vendorid {"val":"051d","ack":true,"ts":1475500006540,"q":0,"from":"system.adapter.nut.0","lc":1472998201458}
nut.0	2016-10-03 15:06:46.576	debug	host. redis publish io.nut.0.ups.timer-shutdown {"val":"-1","ack":true,"ts":1475500006538,"q":0,"from":"system.adapter.nut.0","lc":1472998201458}
nut.0	2016-10-03 15:06:46.576	debug	host. redis publish io.nut.0.ups.timer-reboot {"val":"0","ack":true,"ts":1475500006537,"q":0,"from":"system.adapter.nut.0","lc":1472998201457}
nut.0	2016-10-03 15:06:46.576	debug	host. redis publish io.nut.0.ups.status {"val":"OL","ack":true,"ts":1475500006536,"q":0,"from":"system.adapter.nut.0","lc":1475169226029}
nut.0	2016-10-03 15:06:46.576	debug	host. redis publish io.nut.0.ups.serial {"val":"5B1349T03604 ","ack":true,"ts":1475500006535,"q":0,"from":"system.adapter.nut.0","lc":1472998201456}
nut.0	2016-10-03 15:06:46.576	debug	host. redis publish io.nut.0.ups.productid {"val":"0002","ack":true,"ts":1475500006535,"q":0,"from":"system.adapter.nut.0","lc":1472998201455}
nut.0	2016-10-03 15:06:46.576	debug	host. redis publish io.nut.0.ups.model {"val":"Back-UPS ES 700G","ack":true,"ts":1475500006534,"q":0,"from":"system.adapter.nut.0","lc":1472998201455}
nut.0	2016-10-03 15:06:46.576	debug	host. redis publish io.nut.0.ups.mfr-date {"val":"2013/12/04","ack":true,"ts":1475500006533,"q":0,"from":"system.adapter.nut.0","lc":1472998201455}
nut.0	2016-10-03 15:06:46.576	debug	host. redis publish io.nut.0.ups.mfr {"val":"APC","ack":true,"ts":1475500006532,"q":0,"from":"system.adapter.nut.0","lc":1472998201454}
nut.0	2016-10-03 15:06:46.576	debug	host. redis publish io.nut.0.ups.load {"val":"28","ack":true,"ts":1475500006531,"q":0,"from":"system.adapter.nut.0","lc":1475167411043}
nut.0	2016-10-03 15:06:46.576	debug	host. redis publish io.nut.0.ups.firmware-aux {"val":"O3 ","ack":true,"ts":1475500006531,"q":0,"from":"system.adapter.nut.0","lc":1472998201454}
nut.0	2016-10-03 15:06:46.576	debug	host. redis publish io.nut.0.ups.firmware {"val":"871.O3 .I","ack":true,"ts":1475500006530,"q":0,"from":"system.adapter.nut.0","lc":1472998201453}
nut.0	2016-10-03 15:06:46.576	debug	host. redis publish io.nut.0.ups.delay-shutdown {"val":"20","ack":true,"ts":1475500006529,"q":0,"from":"system.adapter.nut.0","lc":1472998201452}
nut.0	2016-10-03 15:06:46.576	debug	host. redis publish io.nut.0.ups.beeper-status {"val":"enabled","ack":true,"ts":1475500006528,"q":0,"from":"system.adapter.nut.0","lc":1472998201452}
nut.0	2016-10-03 15:06:46.575	debug	host. redis publish io.nut.0.input.voltage-nominal {"val":"230","ack":true,"ts":1475500006528,"q":0,"from":"system.adapter.nut.0","lc":1472998201448}
nut.0	2016-10-03 15:06:46.575	debug	host. redis publish io.nut.0.input.voltage {"val":"232.0","ack":true,"ts":1475500006527,"q":0,"from":"system.adapter.nut.0","lc":1475499511669}
nut.0	2016-10-03 15:06:46.575	debug	host. redis publish io.nut.0.input.transfer-low {"val":"180","ack":true,"ts":1475500006526,"q":0,"from":"system.adapter.nut.0","lc":1472998201447}
nut.0	2016-10-03 15:06:46.575	debug	host. redis publish io.nut.0.input.transfer-high {"val":"266","ack":true,"ts":1475500006525,"q":0,"from":"system.adapter.nut.0","lc":1472998201447}
nut.0	2016-10-03 15:06:46.575	debug	host. redis publish io.nut.0.input.sensitivity {"val":"medium","ack":true,"ts":1475500006525,"q":0,"from":"system.adapter.nut.0","lc":1472998201447}
nut.0	2016-10-03 15:06:46.575	debug	host. redis publish io.nut.0.driver.version-internal {"val":"0.38","ack":true,"ts":1475500006523,"q":0,"from":"system.adapter.nut.0","lc":1472998201447}
nut.0	2016-10-03 15:06:46.575	debug	host. redis publish io.nut.0.driver.version-data {"val":"APC HID 0.95","ack":true,"ts":1475500006523,"q":0,"from":"system.adapter.nut.0","lc":1472998201446}
nut.0	2016-10-03 15:06:46.575	debug	host. redis publish io.nut.0.driver.version {"val":"2.7.2","ack":true,"ts":1475500006523,"q":0,"from":"system.adapter.nut.0","lc":1472998201446}
nut.0	2016-10-03 15:06:46.575	debug	host. redis publish io.nut.0.driver.parameter-port {"val":"auto","ack":true,"ts":1475500006522,"q":0,"from":"system.adapter.nut.0","lc":1472998201445}
nut.0	2016-10-03 15:06:46.575	debug	host. redis publish io.nut.0.driver.parameter-pollinterval {"val":"2","ack":true,"ts":1475500006522,"q":0,"from":"system.adapter.nut.0","lc":1472998201445}
nut.0	2016-10-03 15:06:46.575	debug	host. redis publish io.nut.0.driver.parameter-pollfreq {"val":"30","ack":true,"ts":1475500006522,"q":0,"from":"system.adapter.nut.0","lc":1472998201445}
nut.0	2016-10-03 15:06:46.575	debug	host. redis publish io.nut.0.driver.name {"val":"usbhid-ups","ack":true,"ts":1475500006521,"q":0,"from":"system.adapter.nut.0","lc":1472998201444}
nut.0	2016-10-03 15:06:46.575	debug	host. redis publish io.nut.0.device.type {"val":"ups","ack":true,"ts":1475500006521,"q":0,"from":"system.adapter.nut.0","lc":1472998201444}
nut.0	2016-10-03 15:06:46.575	debug	host. redis publish io.nut.0.device.serial {"val":"5B1349T03604 ","ack":true,"ts":1475500006520,"q":0,"from":"system.adapter.nut.0","lc":1472998201443}
nut.0	2016-10-03 15:06:46.574	debug	host. redis publish io.nut.0.device.model {"val":"Back-UPS ES 700G","ack":true,"ts":1475500006520,"q":0,"from":"system.adapter.nut.0","lc":1472998201443}
nut.0	2016-10-03 15:06:46.574	debug	host. redis publish io.nut.0.device.mfr {"val":"APC","ack":true,"ts":1475500006520,"q":0,"from":"system.adapter.nut.0","lc":1472998201442}
nut.0	2016-10-03 15:06:46.574	debug	host. redis publish io.nut.0.battery.voltage-nominal {"val":"12.0","ack":true,"ts":1475500006519,"q":0,"from":"system.adapter.nut.0","lc":1472998201442}
nut.0	2016-10-03 15:06:46.574	debug	host. redis publish io.nut.0.battery.voltage {"val":"13.7","ack":true,"ts":1475500006518,"q":0,"from":"system.adapter.nut.0","lc":1475499511664}
nut.0	2016-10-03 15:06:46.574	debug	host. redis publish io.nut.0.battery.type {"val":"PbAc","ack":true,"ts":1475500006517,"q":0,"from":"system.adapter.nut.0","lc":1472998201441}
nut.0	2016-10-03 15:06:46.574	debug	host. redis publish io.nut.0.battery.runtime-low {"val":"120","ack":true,"ts":1475500006517,"q":0,"from":"system.adapter.nut.0","lc":1472998201441}
nut.0	2016-10-03 15:06:46.574	debug	host. redis publish io.nut.0.battery.runtime {"val":"1672","ack":true,"ts":1475500006516,"q":0,"from":"system.adapter.nut.0","lc":1475169241007}
nut.0	2016-10-03 15:06:46.574	debug	host. redis publish io.nut.0.battery.mfr-date {"val":"2013/12/04","ack":true,"ts":1475500006515,"q":0,"from":"system.adapter.nut.0","lc":1472998201440}
nut.0	2016-10-03 15:06:46.574	debug	host. redis publish io.nut.0.battery.date {"val":"not set","ack":true,"ts":1475500006515,"q":0,"from":"system.adapter.nut.0","lc":1472998201440}
nut.0	2016-10-03 15:06:46.574	debug	host. redis publish io.nut.0.battery.charge-warning {"val":"50","ack":true,"ts":1475500006514,"q":0,"from":"system.adapter.nut.0","lc":1472998201440}
nut.0	2016-10-03 15:06:46.574	debug	host. redis publish io.nut.0.battery.charge-low {"val":"10","ack":true,"ts":1475500006514,"q":0,"from":"system.adapter.nut.0","lc":1472998201440}
nut.0	2016-10-03 15:06:46.574	debug	host. redis publish io.nut.0.battery.charge {"val":"100","ack":true,"ts":1475500006513,"q":0,"from":"system.adapter.nut.0","lc":1475169241004}
nut.0	2016-10-03 15:06:46.573	info	nut.0 All Nut values set
nut.0	2016-10-03 15:06:46.573	debug	nut.0 Set State status.severity = 0
nut.0	2016-10-03 15:06:46.573	debug	nut.0 Set State status.shutdown = false
nut.0	2016-10-03 15:06:46.573	debug	nut.0 Create State status.shutdown
nut.0	2016-10-03 15:06:46.573	debug	nut.0 Set State status.boosting = false
nut.0	2016-10-03 15:06:46.573	debug	nut.0 Create State status.boosting
nut.0	2016-10-03 15:06:46.573	debug	nut.0 Set State status.trimming = false
nut.0	2016-10-03 15:06:46.573	debug	nut.0 Create State status.trimming
nut.0	2016-10-03 15:06:46.573	debug	nut.0 Set State status.overload = false
nut.0	2016-10-03 15:06:46.573	debug	nut.0 Create State status.overload
nut.0	2016-10-03 15:06:46.573	debug	nut.0 Set State status.offline = false
nut.0	2016-10-03 15:06:46.573	debug	nut.0 Create State status.offline
nut.0	2016-10-03 15:06:46.573	debug	nut.0 Set State status.calibration = false
nut.0	2016-10-03 15:06:46.572	debug	nut.0 Create State status.calibration
nut.0	2016-10-03 15:06:46.572	debug	nut.0 Set State status.bypass = false
nut.0	2016-10-03 15:06:46.572	debug	nut.0 Create State status.bypass
nut.0	2016-10-03 15:06:46.572	debug	nut.0 Set State status.discharging = false
nut.0	2016-10-03 15:06:46.572	debug	nut.0 Create State status.discharging
nut.0	2016-10-03 15:06:46.572	debug	nut.0 Set State status.charging = false
nut.0	2016-10-03 15:06:46.572	debug	nut.0 Create State status.charging
nut.0	2016-10-03 15:06:46.572	debug	nut.0 Set State status.replacebattery = false
nut.0	2016-10-03 15:06:46.572	debug	nut.0 Create State status.replacebattery
nut.0	2016-10-03 15:06:46.572	debug	nut.0 Set State status.highbattery = false
nut.0	2016-10-03 15:06:46.572	debug	nut.0 Create State status.highbattery
nut.0	2016-10-03 15:06:46.572	debug	nut.0 Set State status.lowbattery = false
nut.0	2016-10-03 15:06:46.572	debug	nut.0 Create State status.lowbattery
nut.0	2016-10-03 15:06:46.571	debug	nut.0 Set State status.onbattery = false
nut.0	2016-10-03 15:06:46.571	debug	nut.0 Create State status.onbattery
nut.0	2016-10-03 15:06:46.571	debug	nut.0 Severity Flag idle=true
nut.0	2016-10-03 15:06:46.571	debug	nut.0 Set State status.online = true
nut.0	2016-10-03 15:06:46.571	debug	nut.0 Create State status.online
nut.0	2016-10-03 15:06:46.571	debug	nut.0 Create Channel status
nut.0	2016-10-03 15:06:46.571	debug	nut.0 Set State ups.vendorid = 051d
nut.0	2016-10-03 15:06:46.571	debug	nut.0 Create State ups.vendorid
nut.0	2016-10-03 15:06:46.571	debug	nut.0 Set State ups.timer-shutdown = -1
nut.0	2016-10-03 15:06:46.571	debug	nut.0 Create State ups.timer-shutdown
nut.0	2016-10-03 15:06:46.571	debug	nut.0 Set State ups.timer-reboot = 0
nut.0	2016-10-03 15:06:46.571	debug	nut.0 Create State ups.timer-reboot
nut.0	2016-10-03 15:06:46.571	debug	nut.0 Set State ups.status = OL
nut.0	2016-10-03 15:06:46.571	debug	nut.0 Create State ups.status
nut.0	2016-10-03 15:06:46.570	debug	nut.0 Set State ups.serial = 5B1349T03604
nut.0	2016-10-03 15:06:46.570	debug	nut.0 Create State ups.serial
nut.0	2016-10-03 15:06:46.570	debug	nut.0 Set State ups.productid = 0002
nut.0	2016-10-03 15:06:46.570	debug	nut.0 Create State ups.productid
nut.0	2016-10-03 15:06:46.570	debug	nut.0 Set State ups.model = Back-UPS ES 700G
nut.0	2016-10-03 15:06:46.570	debug	nut.0 Create State ups.model
nut.0	2016-10-03 15:06:46.570	debug	nut.0 Set State ups.mfr-date = 2013/12/04
nut.0	2016-10-03 15:06:46.570	debug	nut.0 Create State ups.mfr-date
nut.0	2016-10-03 15:06:46.570	debug	nut.0 Set State ups.mfr = APC
nut.0	2016-10-03 15:06:46.570	debug	nut.0 Create State ups.mfr
nut.0	2016-10-03 15:06:46.570	debug	nut.0 Set State ups.load = 28
nut.0	2016-10-03 15:06:46.570	debug	nut.0 Create State ups.load
nut.0	2016-10-03 15:06:46.570	debug	nut.0 Set State ups.firmware-aux = O3
nut.0	2016-10-03 15:06:46.570	debug	nut.0 Create State ups.firmware-aux
nut.0	2016-10-03 15:06:46.569	debug	nut.0 Set State ups.firmware = 871.O3 .I
nut.0	2016-10-03 15:06:46.569	debug	nut.0 Create State ups.firmware
nut.0	2016-10-03 15:06:46.569	debug	nut.0 Set State ups.delay-shutdown = 20
nut.0	2016-10-03 15:06:46.569	debug	nut.0 Create State ups.delay-shutdown
nut.0	2016-10-03 15:06:46.569	debug	nut.0 Set State ups.beeper-status = enabled
nut.0	2016-10-03 15:06:46.569	debug	nut.0 Create State ups.beeper-status
nut.0	2016-10-03 15:06:46.569	debug	nut.0 Create Channel ups
nut.0	2016-10-03 15:06:46.569	debug	nut.0 Set State input.voltage-nominal = 230
nut.0	2016-10-03 15:06:46.569	debug	nut.0 Create State input.voltage-nominal
nut.0	2016-10-03 15:06:46.569	debug	nut.0 Set State input.voltage = 232.0
nut.0	2016-10-03 15:06:46.569	debug	nut.0 Create State input.voltage
nut.0	2016-10-03 15:06:46.568	debug	nut.0 Set State input.transfer-low = 180
nut.0	2016-10-03 15:06:46.567	debug	nut.0 Create State input.transfer-low
nut.0	2016-10-03 15:06:46.567	debug	nut.0 Set State input.transfer-high = 266
nut.0	2016-10-03 15:06:46.567	debug	nut.0 Create State input.transfer-high
nut.0	2016-10-03 15:06:46.567	debug	nut.0 Set State input.sensitivity = medium
nut.0	2016-10-03 15:06:46.567	debug	nut.0 Create State input.sensitivity
nut.0	2016-10-03 15:06:46.567	debug	nut.0 Create Channel input
nut.0	2016-10-03 15:06:46.567	debug	nut.0 Set State driver.version-internal = 0.38
nut.0	2016-10-03 15:06:46.567	debug	nut.0 Create State driver.version-internal
nut.0	2016-10-03 15:06:46.567	debug	nut.0 Set State driver.version-data = APC HID 0.95
nut.0	2016-10-03 15:06:46.567	debug	nut.0 Create State driver.version-data
nut.0	2016-10-03 15:06:46.567	debug	nut.0 Set State driver.version = 2.7.2
nut.0	2016-10-03 15:06:46.567	debug	nut.0 Create State driver.version
nut.0	2016-10-03 15:06:46.567	debug	nut.0 Set State driver.parameter-port = auto
nut.0	2016-10-03 15:06:46.566	debug	nut.0 Create State driver.parameter-port
nut.0	2016-10-03 15:06:46.566	debug	nut.0 Set State driver.parameter-pollinterval = 2
nut.0	2016-10-03 15:06:46.566	debug	nut.0 Create State driver.parameter-pollinterval
nut.0	2016-10-03 15:06:46.566	debug	nut.0 Set State driver.parameter-pollfreq = 30
nut.0	2016-10-03 15:06:46.566	debug	nut.0 Create State driver.parameter-pollfreq
nut.0	2016-10-03 15:06:46.566	debug	nut.0 Set State driver.name = usbhid-ups
nut.0	2016-10-03 15:06:46.566	debug	nut.0 Create State driver.name
nut.0	2016-10-03 15:06:46.566	debug	nut.0 Create Channel driver
nut.0	2016-10-03 15:06:46.566	debug	nut.0 Set State device.type = ups
nut.0	2016-10-03 15:06:46.566	debug	nut.0 Create State device.type
nut.0	2016-10-03 15:06:46.566	debug	nut.0 Set State device.serial = 5B1349T03604
nut.0	2016-10-03 15:06:46.566	debug	nut.0 Create State device.serial
nut.0	2016-10-03 15:06:46.566	debug	nut.0 Set State device.model = Back-UPS ES 700G
nut.0	2016-10-03 15:06:46.566	debug	nut.0 Create State device.model
nut.0	2016-10-03 15:06:46.565	debug	nut.0 Set State device.mfr = APC
nut.0	2016-10-03 15:06:46.565	debug	nut.0 Create State device.mfr
nut.0	2016-10-03 15:06:46.565	debug	nut.0 Create Channel device
nut.0	2016-10-03 15:06:46.565	debug	nut.0 Set State battery.voltage-nominal = 12.0
nut.0	2016-10-03 15:06:46.565	debug	nut.0 Create State battery.voltage-nominal
nut.0	2016-10-03 15:06:46.565	debug	nut.0 Set State battery.voltage = 13.7
nut.0	2016-10-03 15:06:46.565	debug	nut.0 Create State battery.voltage
nut.0	2016-10-03 15:06:46.565	debug	nut.0 Set State battery.type = PbAc
nut.0	2016-10-03 15:06:46.565	debug	nut.0 Create State battery.type
nut.0	2016-10-03 15:06:46.565	debug	nut.0 Set State battery.runtime-low = 120
nut.0	2016-10-03 15:06:46.565	debug	nut.0 Create State battery.runtime-low
nut.0	2016-10-03 15:06:46.565	debug	nut.0 Set State battery.runtime = 1672
nut.0	2016-10-03 15:06:46.565	debug	nut.0 Create State battery.runtime
nut.0	2016-10-03 15:06:46.565	debug	nut.0 Set State battery.mfr-date = 2013/12/04
nut.0	2016-10-03 15:06:46.565	debug	nut.0 Create State battery.mfr-date
nut.0	2016-10-03 15:06:46.564	debug	nut.0 Set State battery.date = not set
nut.0	2016-10-03 15:06:46.564	debug	nut.0 Create State battery.date
nut.0	2016-10-03 15:06:46.564	debug	nut.0 Set State battery.charge-warning = 50
nut.0	2016-10-03 15:06:46.564	debug	nut.0 Create State battery.charge-warning
nut.0	2016-10-03 15:06:46.564	debug	nut.0 Set State battery.charge-low = 10
nut.0	2016-10-03 15:06:46.564	debug	nut.0 Create State battery.charge-low
nut.0	2016-10-03 15:06:46.564	debug	nut.0 Set State battery.charge = 100
nut.0	2016-10-03 15:06:46.564	debug	nut.0 Create State battery.charge
nut.0	2016-10-03 15:06:46.564	debug	nut.0 Create Channel battery
nut.0	2016-10-03 15:06:46.564	debug	nut.0 Got values, start setting them
nut.0	2016-10-03 15:06:46.564	debug	nut.0 NUT Connection ready
nut.0	2016-10-03 15:06:46.564	info	nut.0 Start NUT update
Mastermind	2016-10-03 15:06:45.531	warn	host.Mastermind instance system.adapter.nut.0 already running with pid 14081

obwohl der Adapter auf log Level "info" steht

apollon77

Korrekt Homoran … sorry hab den Pfad vergessen anzugeben.

Homoran

hast du nach dem download ein

iobroker upload nut

gemacht?

sonst ist ggf. noch die alte Version aktiv, obwohl im admin schon die neue angezeigt wird.

Gruß

Rainer

rascal

Ja, habe ich

Gesendet von meinem HUAWEI CRR-L09 mit Tapatalk

rascal

Habe iobroker auch neu gestartet

Gesendet von meinem HUAWEI CRR-L09 mit Tapatalk

apollon77

~~@rascal:~~

hey,

ich dachte, man muss das Intervall nun in den Adaptereinstellungen angeben, aber er fragt nach wie vor nach dem schedule: `

Bitte versuche mal wie von Homoran gesagt das upload.

AN sich ist im Adapter ein Stück Code drin der den "Tausch" machen sollte …

Wenn es dann immer noch nicht tut dann geh mal zu "Objekte".

Dort dann bei Type auf "instance" und auf den "Nut.0" (o.ä.) hinten auf edit klicken. Dann bekommst Du das Konfigobjekt angezeigt. poste das mal bitte.

Falls dort bei "mode" noch "schedule" steht dann schreib einfach "daemon" rein ... aber eigentlich sollte das der Adapter selbst machen ...den Tip dazu hatte mit Bluefox gegeben. Wenn nicht muss ich da nochmal ran

Zum Logging: Häää ... komisch. Er gibt bei Dir "debug" Meldungen aus. ALs ob der Adapter auf Debug stehen würde. AUch das Loglevel findest Du in diesem Konfigobjekt von oben.

rascal

das "raw" Feld des system.adapter.nut.0

{
  "common": {
    "name": "nut",
    "version": "1.0.0",
    "title": "Network UPS Adapter",
    "desc": "Read all data from your UPS/USV via nut protocol",
    "platform": "Javascript/Node.js",
    "mode": "schedule",
    "schedule": "*/5 * * * * *",
    "icon": "nut.png",
    "extIcon": "https://raw.githubusercontent.com/Apollon77/ioBroker.nut/master/admin/nut.png",
    "readme": "https://github.com/Apollon77/ioBroker.nut",
    "license": "MIT",
    "type": "hardware",
    "loglevel": "info",
    "installedVersion": "1.0.0",
    "host": "Mastermind",
    "subscribe": "messagebox",
    "enabled": true,
    "messagebox": true,
    "news": {
      "0.3.0": {
        "en": "add better usable status states under 'status channel",
        "de": "Besser nutzbare Stati States unter 'status' eingefügt",
        "ru": "add better usable status states under 'status channel"
      },
      "1.0.0": {
        "en": "change mode from schedule to deamon, implement message support to receive messages from upsmon, add status.severity",
        "de": "Adapter arbeitet nun als Deamon, Notify-Support per upsmon hinzugefügt, status.severity hinzugefügt",
        "ru": "change mode from schedule to deamon, implement message support to receive messages from upsmon, add status.severity"
      }
    },
    "npmLibs": [],
    "keywords": [
      "iobroker",
      "nut",
      "ups",
      "usv"
    ]
  },
  "native": {
    "host_ip": "127.0.0.1",
    "host_port": "3493",
    "ups_name": "Powerplant",
    "update_interval": "5"
  },
  "acl": {
    "object": 1638,
    "owner": "system.user.admin",
    "ownerGroup": "system.group.administrator"
  },
  "_id": "system.adapter.nut.0",
  "type": "instance"
}

allgemein:
421_unbenannt.jpg

apollon77

Schreib bei mode mal "daemon" rein und starte neu. was passiert dann?

… und du willst wirklich alle 5 Sekunden neu lesen?

rascal

hey,

ja, es läuft.

einziger Schönheitsfehler ist wieder das Log:

host-Mastermind	2016-10-03 17:37:10.012	warn	instance system.adapter.nut.0 already running with pid 21959
nut-0	2016-10-03 17:37:08.906	info	All Nut values set
nut-0	2016-10-03 17:37:08.886	info	Start NUT update

nachdem ich iobroker neu gestartet habe, scheint es auch mit dem Log zu funktionieren

Danke für die Hilfe, falls mir was auffällt, melde ich mich wieder.

apollon77

Mit Loglevel "warn" sollte fast nichts im Log stehen.

apollon77

Soooo … jetzt ist die Version im Github auch wirklich mit der Logik die von Schedule- auf Daemon-Modus automagisch umbaut

Also wenn noch jemand testen will

Update am besten per Kommandozeile und danach "upload" manuell machen - nötig wegen dem Direktinstall vom Github.

Theoretisch sollte er nach dem Update dann die DInger erstmal noch als "Schedule" haben und beim ersten Start wird dann umgeschrieben.

Ggf ist danach ein iobroker restart nötig bis dann alles echt rund läuft. Bei meinen Tests lief er als Daemon, wurde aber trotzdem einmal pro Stunde zusätzlich gestartet was nur eine Fehlerzeile im Log gab. Rest lief rund.

Nach neustart war alles super.

Kann das noch jemand testen?

Ingo F

wendy2702

Hi,

versuche gerade den Adapter zum laufen zu bekommen.

Wenn ich meine UPS Abfrage welche direkt am iobroker Server hängt sieht das so aus:

> upsc ups@127.0.0.1
battery.charge: 100
battery.charge.low: 10
battery.charge.warning: 50
battery.date: 2001/09/25
battery.mfr.date: 2013/11/18
battery.runtime: 11440
battery.runtime.low: 120
battery.type: PbAc
battery.voltage: 27.1
battery.voltage.nominal: 24.0
device.mfr: American Power Conversion
device.model: Back-UPS RS 900G
device.serial: 3B1329X15638
device.type: ups
driver.name: usbhid-ups
driver.parameter.pollfreq: 30
driver.parameter.pollinterval: 2
driver.parameter.port: auto
driver.parameter.vendorid: 051d
driver.version: 2.6.4
driver.version.data: APC HID 0.95
driver.version.internal: 0.37
input.sensitivity: medium
input.transfer.high: 294
input.transfer.low: 176
input.voltage: 231.0
input.voltage.nominal: 230
ups.beeper.status: enabled
ups.delay.shutdown: 20
ups.firmware: 879.L4 .I
ups.firmware.aux: L4
ups.load: 5
ups.mfr: American Power Conversion
ups.mfr.date: 2013/07/19
ups.model: Back-UPS RS 900G
ups.productid: 0002
ups.realpower.nominal: 540
ups.serial: 3B1329X15638
ups.status: OL
ups.test.result: No test initiated
ups.timer.reboot: 0
ups.timer.shutdown: -1
ups.vendorid: 051d

Wenn ich den Adapter mit den default Werten starte erscheint das im log:

nut.0	2017-01-10 21:41:30.887	error	Error happend: Error: connect ECONNREFUSED 127.0.0.1:3493

Das ganze ist Debian Wheezy mit folgenden Node und NPM Versionen:

 npm -v
2.15.11
root@openmediavault /opt/iobroker/node_modules/iobroker.nut/test > node -v
v4.7.0

Fehlt mir etwas auf meinem System oder liegt das an meiner USV?

Danke und Gruß

Mirko

apollon77

In welchem Modus läuft denn der nut? (/etc/nut/nut.conf). Es sollte nicht auf "none" stehen … must vllt mal die modi durchprobieren ... netserver geht in jedem Fall denke ich.

wendy2702

Läuft auf:

 cat /etc/nut/nut.conf
MODE=standalone

Mal auf netserver und netclient gestellt.

Geht mit beiden nicht oder muss ich nach ändern der nut.conf noch mehr machen als nur den Adapter neu starten?

Ist es richtig das in der nut.conf nur diese eine Zeile steht?

apollon77

Wenn Du auf netserver stellst und neu startest … was sagt das log? Ich glaube aber da muss dann noch mehr rein in ein anderes File.

Schau mal z.B. hier: https://wiki.openwrt.org/inbox/software.nut

http://zackreed.me/installing-nut-on-ubuntu/

wendy2702

so sieht es mit netserver aus:

nut.0	2017-01-10 23:22:53.415	error	Error happend: Error: connect ECONNREFUSED 127.0.0.1:3493
nut.0	2017-01-10 23:22:53.410	info	Start NUT update
nut.0	2017-01-10 23:22:53.397	info	starting. Version 1.0.0 in /opt/iobroker/node_modules/iobroker.nut, node: v4.7.0

NEWS

Adapter "iobroker.nut" - UPS Daten im iobroker

Support us

479
Online

31.7k
Users

79.8k
Topics

1.3m
Posts

NEWS

Adapter "iobroker.nut" - UPS Daten im iobroker

Support us

479Online

31.7kUsers

79.8kTopics

1.3mPosts

479
Online

31.7k
Users

79.8k
Topics

1.3m
Posts