iobroker weboberfläche ist nicht mehr erreichbar
-
@shaky202 es gibt schon unzählige Threads zu diesem und ähnlichen Themen
vor allem, was hast du gemacht bzw, gab es ein Ereignis(Stromausfall),
denn Plötzlich passiert so etwas eigentlich nicht -
-
@wendy2702
ich habe den raspi seit vorgestern über eine externe ssd angeschlossen... danach lief er aber problemlos. Das System besteht aus einem Raspberry 4 mit originaler Stromversorgung und externer SSD. Welche Logs können helfen? -
dmesg -
@thomas-braun was bedeutet der Befehl dmesg
-
@thomas-braun falls damit der Befehl dmesg -T gemeint war, anbei der Logfile
[Fr Mär 5 19:07:48 2021] Booting Linux on physical CPU 0x0 [Fr Mär 5 19:07:48 2021] Linux version 5.10.11-v7l+ (dom@buildbot) (arm-linux-gnueabihf-gcc-8 (Ubuntu/Linaro 8.4.0-3ubuntu1) 8.4.0, GNU ld (GNU Binutils for Ubuntu) 2.34) #1399 SMP Thu Jan 28 12:09:48 GMT 2021 [Fr Mär 5 19:07:48 2021] CPU: ARMv7 Processor [410fd083] revision 3 (ARMv7), cr=30c5383d [Fr Mär 5 19:07:48 2021] CPU: div instructions available: patching division code [Fr Mär 5 19:07:48 2021] CPU: PIPT / VIPT nonaliasing data cache, PIPT instruction cache [Fr Mär 5 19:07:48 2021] OF: fdt: Machine model: Raspberry Pi 4 Model B Rev 1.2 [Fr Mär 5 19:07:48 2021] Memory policy: Data cache writealloc [Fr Mär 5 19:07:48 2021] Reserved memory: created CMA memory pool at 0x000000001ec00000, size 256 MiB [Fr Mär 5 19:07:48 2021] OF: reserved mem: initialized node linux,cma, compatible id shared-dma-pool [Fr Mär 5 19:07:48 2021] Zone ranges: [Fr Mär 5 19:07:48 2021] DMA [mem 0x0000000000000000-0x000000002fffffff] [Fr Mär 5 19:07:48 2021] Normal empty [Fr Mär 5 19:07:48 2021] HighMem [mem 0x0000000030000000-0x00000000fbffffff] [Fr Mär 5 19:07:48 2021] Movable zone start for each node [Fr Mär 5 19:07:48 2021] Early memory node ranges [Fr Mär 5 19:07:48 2021] node 0: [mem 0x0000000000000000-0x000000003b2fffff] [Fr Mär 5 19:07:48 2021] node 0: [mem 0x0000000040000000-0x00000000fbffffff] [Fr Mär 5 19:07:48 2021] Initmem setup node 0 [mem 0x0000000000000000-0x00000000fbffffff] [Fr Mär 5 19:07:48 2021] On node 0 totalpages: 1012480 [Fr Mär 5 19:07:48 2021] DMA zone: 2304 pages used for memmap [Fr Mär 5 19:07:48 2021] DMA zone: 0 pages reserved [Fr Mär 5 19:07:48 2021] DMA zone: 196608 pages, LIFO batch:63 [Fr Mär 5 19:07:48 2021] HighMem zone: 815872 pages, LIFO batch:63 [Fr Mär 5 19:07:48 2021] percpu: Embedded 20 pages/cpu s50636 r8192 d23092 u81920 [Fr Mär 5 19:07:48 2021] pcpu-alloc: s50636 r8192 d23092 u81920 alloc=20*4096 [Fr Mär 5 19:07:48 2021] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 [Fr Mär 5 19:07:48 2021] Built 1 zonelists, mobility grouping on. Total pages: 1010176 [Fr Mär 5 19:07:48 2021] Kernel command line: coherent_pool=1M 8250.nr_uarts=1 snd_bcm2835.enable_compat_alsa=0 snd_bcm2835.enable_hdmi=1 video=HDMI-A-1:640x480M@60 smsc95xx.macaddr=DC:A6:32:F0:00:7E vc_mem.mem_base=0x3eb00000 vc_mem.mem_size=0x3ff00000 console=tty1 root=PARTUUID=d7e04f68-02 rootfstype=ext4 elevator=deadline fsck.repair=yes rootwait quiet splash plymouth.ignore-serial-consoles [Fr Mär 5 19:07:48 2021] Kernel parameter elevator= does not have any effect anymore. Please use sysfs to set IO scheduler for individual devices. [Fr Mär 5 19:07:48 2021] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes, linear) [Fr Mär 5 19:07:48 2021] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes, linear) [Fr Mär 5 19:07:48 2021] mem auto-init: stack:off, heap alloc:off, heap free:off [Fr Mär 5 19:07:48 2021] software IO TLB: mapped [mem 0x0000000017cc0000-0x000000001bcc0000] (64MB) [Fr Mär 5 19:07:48 2021] Memory: 3653920K/4049920K available (10240K kernel code, 1354K rwdata, 3152K rodata, 2048K init, 890K bss, 133856K reserved, 262144K cma-reserved, 3263488K highmem) [Fr Mär 5 19:07:48 2021] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [Fr Mär 5 19:07:48 2021] ftrace: allocating 33824 entries in 67 pages [Fr Mär 5 19:07:48 2021] ftrace: allocated 67 pages with 3 groups [Fr Mär 5 19:07:48 2021] rcu: Hierarchical RCU implementation. [Fr Mär 5 19:07:48 2021] Rude variant of Tasks RCU enabled. [Fr Mär 5 19:07:48 2021] Tracing variant of Tasks RCU enabled. [Fr Mär 5 19:07:48 2021] rcu: RCU calculated value of scheduler-enlistment delay is 10 jiffies. [Fr Mär 5 19:07:48 2021] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16 [Fr Mär 5 19:07:48 2021] GIC: Using split EOI/Deactivate mode [Fr Mär 5 19:07:48 2021] random: get_random_bytes called from start_kernel+0x3c8/0x59c with crng_init=0 [Fr Mär 5 19:07:48 2021] sched_clock: 32 bits at 1000kHz, resolution 1000ns, wraps every 2147483647500ns [Fr Mär 5 19:07:48 2021] clocksource: timer: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275 ns [Fr Mär 5 19:07:48 2021] bcm2835: system timer (irq = 25) [Fr Mär 5 19:07:48 2021] arch_timer: cp15 timer(s) running at 54.00MHz (phys). [Fr Mär 5 19:07:48 2021] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0xc743ce346, max_idle_ns: 440795203123 ns [Fr Mär 5 19:07:48 2021] sched_clock: 56 bits at 54MHz, resolution 18ns, wraps every 4398046511102ns [Fr Mär 5 19:07:48 2021] Switching to timer-based delay loop, resolution 18ns [Fr Mär 5 19:07:48 2021] Console: colour dummy device 80x30 [Fr Mär 5 19:07:48 2021] printk: console [tty1] enabled [Fr Mär 5 19:07:48 2021] Calibrating delay loop (skipped), value calculated using timer frequency.. 108.00 BogoMIPS (lpj=540000) [Fr Mär 5 19:07:48 2021] pid_max: default: 32768 minimum: 301 [Fr Mär 5 19:07:48 2021] LSM: Security Framework initializing [Fr Mär 5 19:07:48 2021] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes, linear) [Fr Mär 5 19:07:48 2021] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes, linear) [Fr Mär 5 19:07:48 2021] Disabling memory control group subsystem [Fr Mär 5 19:07:48 2021] CPU: Testing write buffer coherency: ok [Fr Mär 5 19:07:48 2021] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000 [Fr Mär 5 19:07:48 2021] Setting up static identity map for 0x200000 - 0x20003c [Fr Mär 5 19:07:48 2021] rcu: Hierarchical SRCU implementation. [Fr Mär 5 19:07:48 2021] smp: Bringing up secondary CPUs ... [Fr Mär 5 19:07:48 2021] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001 [Fr Mär 5 19:07:48 2021] CPU2: thread -1, cpu 2, socket 0, mpidr 80000002 [Fr Mär 5 19:07:48 2021] CPU3: thread -1, cpu 3, socket 0, mpidr 80000003 [Fr Mär 5 19:07:48 2021] smp: Brought up 1 node, 4 CPUs [Fr Mär 5 19:07:48 2021] SMP: Total of 4 processors activated (432.00 BogoMIPS). [Fr Mär 5 19:07:48 2021] CPU: All CPU(s) started in HYP mode. [Fr Mär 5 19:07:48 2021] CPU: Virtualization extensions available. [Fr Mär 5 19:07:48 2021] devtmpfs: initialized [Fr Mär 5 19:07:48 2021] VFP support v0.3: implementor 41 architecture 3 part 40 variant 8 rev 0 [Fr Mär 5 19:07:48 2021] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns [Fr Mär 5 19:07:48 2021] futex hash table entries: 1024 (order: 4, 65536 bytes, linear) [Fr Mär 5 19:07:48 2021] pinctrl core: initialized pinctrl subsystem [Fr Mär 5 19:07:48 2021] NET: Registered protocol family 16 [Fr Mär 5 19:07:48 2021] DMA: preallocated 1024 KiB pool for atomic coherent allocations [Fr Mär 5 19:07:48 2021] audit: initializing netlink subsys (disabled) [Fr Mär 5 19:07:48 2021] audit: type=2000 audit(0.030:1): state=initialized audit_enabled=0 res=1 [Fr Mär 5 19:07:48 2021] thermal_sys: Registered thermal governor 'step_wise' [Fr Mär 5 19:07:48 2021] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers. [Fr Mär 5 19:07:48 2021] hw-breakpoint: maximum watchpoint size is 8 bytes. [Fr Mär 5 19:07:48 2021] Serial: AMBA PL011 UART driver [Fr Mär 5 19:07:48 2021] bcm2835-mbox fe00b880.mailbox: mailbox enabled [Fr Mär 5 19:07:48 2021] raspberrypi-firmware soc:firmware: Attached to firmware from 2021-01-27T22:19:57, variant start [Fr Mär 5 19:07:48 2021] raspberrypi-firmware soc:firmware: Firmware hash is 99d9a48302e4553cff3688692bb7e9ac760a03fa [Fr Mär 5 19:07:48 2021] bcm2835-dma fe007000.dma: DMA legacy API manager, dmachans=0x1 [Fr Mär 5 19:07:48 2021] vgaarb: loaded [Fr Mär 5 19:07:48 2021] SCSI subsystem initialized [Fr Mär 5 19:07:48 2021] usbcore: registered new interface driver usbfs [Fr Mär 5 19:07:48 2021] usbcore: registered new interface driver hub [Fr Mär 5 19:07:48 2021] usbcore: registered new device driver usb [Fr Mär 5 19:07:48 2021] usb_phy_generic phy: supply vcc not found, using dummy regulator [Fr Mär 5 19:07:48 2021] clocksource: Switched to clocksource arch_sys_counter [Fr Mär 5 19:07:49 2021] VFS: Disk quotas dquot_6.6.0 [Fr Mär 5 19:07:49 2021] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [Fr Mär 5 19:07:49 2021] FS-Cache: Loaded [Fr Mär 5 19:07:49 2021] CacheFiles: Loaded [Fr Mär 5 19:07:49 2021] simple-framebuffer 3e997000.framebuffer: framebuffer at 0x3e997000, 0x12c000 bytes, mapped to 0x(ptrval) [Fr Mär 5 19:07:49 2021] simple-framebuffer 3e997000.framebuffer: format=a8r8g8b8, mode=640x480x32, linelength=2560 [Fr Mär 5 19:07:49 2021] Console: switching to colour frame buffer device 80x30 [Fr Mär 5 19:07:49 2021] simple-framebuffer 3e997000.framebuffer: fb0: simplefb registered! [Fr Mär 5 19:07:49 2021] NET: Registered protocol family 2 [Fr Mär 5 19:07:49 2021] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 6144 bytes, linear) [Fr Mär 5 19:07:49 2021] TCP established hash table entries: 8192 (order: 3, 32768 bytes, linear) [Fr Mär 5 19:07:49 2021] TCP bind hash table entries: 8192 (order: 4, 65536 bytes, linear) [Fr Mär 5 19:07:49 2021] TCP: Hash tables configured (established 8192 bind 8192) [Fr Mär 5 19:07:49 2021] UDP hash table entries: 512 (order: 2, 16384 bytes, linear) [Fr Mär 5 19:07:49 2021] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes, linear) [Fr Mär 5 19:07:49 2021] NET: Registered protocol family 1 [Fr Mär 5 19:07:49 2021] RPC: Registered named UNIX socket transport module. [Fr Mär 5 19:07:49 2021] RPC: Registered udp transport module. [Fr Mär 5 19:07:49 2021] RPC: Registered tcp transport module. [Fr Mär 5 19:07:49 2021] RPC: Registered tcp NFSv4.1 backchannel transport module. [Fr Mär 5 19:07:49 2021] PCI: CLS 0 bytes, default 64 [Fr Mär 5 19:07:49 2021] Initialise system trusted keyrings [Fr Mär 5 19:07:49 2021] workingset: timestamp_bits=14 max_order=20 bucket_order=6 [Fr Mär 5 19:07:49 2021] zbud: loaded [Fr Mär 5 19:07:49 2021] FS-Cache: Netfs 'nfs' registered for caching [Fr Mär 5 19:07:49 2021] NFS: Registering the id_resolver key type [Fr Mär 5 19:07:49 2021] Key type id_resolver registered [Fr Mär 5 19:07:49 2021] Key type id_legacy registered [Fr Mär 5 19:07:49 2021] nfs4filelayout_init: NFSv4 File Layout Driver Registering... [Fr Mär 5 19:07:49 2021] Key type asymmetric registered [Fr Mär 5 19:07:49 2021] Asymmetric key parser 'x509' registered [Fr Mär 5 19:07:49 2021] bounce: pool size: 64 pages [Fr Mär 5 19:07:49 2021] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 249) [Fr Mär 5 19:07:49 2021] io scheduler mq-deadline registered [Fr Mär 5 19:07:49 2021] io scheduler kyber registered [Fr Mär 5 19:07:49 2021] brcm-pcie fd500000.pcie: host bridge /scb/pcie@7d500000 ranges: [Fr Mär 5 19:07:49 2021] brcm-pcie fd500000.pcie: No bus range found for /scb/pcie@7d500000, using [bus 00-ff] [Fr Mär 5 19:07:49 2021] brcm-pcie fd500000.pcie: MEM 0x0600000000..0x063fffffff -> 0x00c0000000 [Fr Mär 5 19:07:49 2021] brcm-pcie fd500000.pcie: IB MEM 0x0000000000..0x00bfffffff -> 0x0400000000 [Fr Mär 5 19:07:49 2021] brcm-pcie fd500000.pcie: link up, 5.0 GT/s PCIe x1 (SSC) [Fr Mär 5 19:07:49 2021] brcm-pcie fd500000.pcie: PCI host bridge to bus 0000:00 [Fr Mär 5 19:07:49 2021] pci_bus 0000:00: root bus resource [bus 00-ff] [Fr Mär 5 19:07:49 2021] pci_bus 0000:00: root bus resource [mem 0x600000000-0x63fffffff] (bus address [0xc0000000-0xffffffff]) [Fr Mär 5 19:07:49 2021] pci 0000:00:00.0: [14e4:2711] type 01 class 0x060400 [Fr Mär 5 19:07:49 2021] pci 0000:00:00.0: PME# supported from D0 D3hot [Fr Mär 5 19:07:49 2021] PCI: bus0: Fast back to back transfers disabled [Fr Mär 5 19:07:49 2021] pci 0000:01:00.0: [1106:3483] type 00 class 0x0c0330 [Fr Mär 5 19:07:49 2021] pci 0000:01:00.0: reg 0x10: [mem 0x00000000-0x00000fff 64bit] [Fr Mär 5 19:07:49 2021] pci 0000:01:00.0: PME# supported from D0 D3cold [Fr Mär 5 19:07:49 2021] PCI: bus1: Fast back to back transfers disabled [Fr Mär 5 19:07:49 2021] pci 0000:00:00.0: BAR 8: assigned [mem 0x600000000-0x6000fffff] [Fr Mär 5 19:07:49 2021] pci 0000:01:00.0: BAR 0: assigned [mem 0x600000000-0x600000fff 64bit] [Fr Mär 5 19:07:49 2021] pci 0000:00:00.0: PCI bridge to [bus 01] [Fr Mär 5 19:07:49 2021] pci 0000:00:00.0: bridge window [mem 0x600000000-0x6000fffff] [Fr Mär 5 19:07:49 2021] pcieport 0000:00:00.0: enabling device (0140 -> 0142) [Fr Mär 5 19:07:49 2021] pcieport 0000:00:00.0: PME: Signaling with IRQ 63 [Fr Mär 5 19:07:49 2021] Serial: 8250/16550 driver, 1 ports, IRQ sharing enabled [Fr Mär 5 19:07:49 2021] bcm2835-aux-uart fe215040.serial: there is not valid maps for state default [Fr Mär 5 19:07:49 2021] iproc-rng200 fe104000.rng: hwrng registered [Fr Mär 5 19:07:49 2021] vc-mem: phys_addr:0x00000000 mem_base=0x3eb00000 mem_size:0x3ff00000(1023 MiB) [Fr Mär 5 19:07:49 2021] gpiomem-bcm2835 fe200000.gpiomem: Initialised: Registers at 0xfe200000 [Fr Mär 5 19:07:49 2021] brd: module loaded [Fr Mär 5 19:07:49 2021] loop: module loaded [Fr Mär 5 19:07:49 2021] Loading iSCSI transport class v2.0-870. [Fr Mär 5 19:07:49 2021] libphy: Fixed MDIO Bus: probed [Fr Mär 5 19:07:49 2021] bcmgenet fd580000.ethernet: GENET 5.0 EPHY: 0x0000 [Fr Mär 5 19:07:49 2021] libphy: bcmgenet MII bus: probed [Fr Mär 5 19:07:49 2021] unimac-mdio unimac-mdio.-19: Broadcom UniMAC MDIO bus [Fr Mär 5 19:07:49 2021] usbcore: registered new interface driver r8152 [Fr Mär 5 19:07:49 2021] usbcore: registered new interface driver lan78xx [Fr Mär 5 19:07:49 2021] usbcore: registered new interface driver smsc95xx [Fr Mär 5 19:07:49 2021] xhci_hcd 0000:01:00.0: enabling device (0140 -> 0142) [Fr Mär 5 19:07:49 2021] xhci_hcd 0000:01:00.0: xHCI Host Controller [Fr Mär 5 19:07:49 2021] xhci_hcd 0000:01:00.0: new USB bus registered, assigned bus number 1 [Fr Mär 5 19:07:49 2021] xhci_hcd 0000:01:00.0: hcc params 0x002841eb hci version 0x100 quirks 0x0000030000000890 [Fr Mär 5 19:07:49 2021] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.10 [Fr Mär 5 19:07:49 2021] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [Fr Mär 5 19:07:49 2021] usb usb1: Product: xHCI Host Controller [Fr Mär 5 19:07:49 2021] usb usb1: Manufacturer: Linux 5.10.11-v7l+ xhci-hcd [Fr Mär 5 19:07:49 2021] usb usb1: SerialNumber: 0000:01:00.0 [Fr Mär 5 19:07:49 2021] hub 1-0:1.0: USB hub found [Fr Mär 5 19:07:49 2021] hub 1-0:1.0: 1 port detected [Fr Mär 5 19:07:49 2021] xhci_hcd 0000:01:00.0: xHCI Host Controller [Fr Mär 5 19:07:49 2021] xhci_hcd 0000:01:00.0: new USB bus registered, assigned bus number 2 [Fr Mär 5 19:07:49 2021] xhci_hcd 0000:01:00.0: Host supports USB 3.0 SuperSpeed [Fr Mär 5 19:07:49 2021] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.10 [Fr Mär 5 19:07:49 2021] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [Fr Mär 5 19:07:49 2021] usb usb2: Product: xHCI Host Controller [Fr Mär 5 19:07:49 2021] usb usb2: Manufacturer: Linux 5.10.11-v7l+ xhci-hcd [Fr Mär 5 19:07:49 2021] usb usb2: SerialNumber: 0000:01:00.0 [Fr Mär 5 19:07:49 2021] hub 2-0:1.0: USB hub found [Fr Mär 5 19:07:49 2021] hub 2-0:1.0: 4 ports detected [Fr Mär 5 19:07:49 2021] dwc_otg: version 3.00a 10-AUG-2012 (platform bus) [Fr Mär 5 19:07:49 2021] dwc_otg: FIQ enabled [Fr Mär 5 19:07:49 2021] dwc_otg: NAK holdoff enabled [Fr Mär 5 19:07:49 2021] dwc_otg: FIQ split-transaction FSM enabled [Fr Mär 5 19:07:49 2021] Module dwc_common_port init [Fr Mär 5 19:07:49 2021] usbcore: registered new interface driver uas [Fr Mär 5 19:07:49 2021] usbcore: registered new interface driver usb-storage [Fr Mär 5 19:07:49 2021] mousedev: PS/2 mouse device common for all mice [Fr Mär 5 19:07:49 2021] bcm2835-wdt bcm2835-wdt: Broadcom BCM2835 watchdog timer [Fr Mär 5 19:07:49 2021] sdhci: Secure Digital Host Controller Interface driver [Fr Mär 5 19:07:49 2021] sdhci: Copyright(c) Pierre Ossman [Fr Mär 5 19:07:49 2021] mmc-bcm2835 fe300000.mmcnr: could not get clk, deferring probe [Fr Mär 5 19:07:49 2021] sdhci-pltfm: SDHCI platform and OF driver helper [Fr Mär 5 19:07:49 2021] ledtrig-cpu: registered to indicate activity on CPUs [Fr Mär 5 19:07:49 2021] hid: raw HID events driver (C) Jiri Kosina [Fr Mär 5 19:07:49 2021] usbcore: registered new interface driver usbhid [Fr Mär 5 19:07:49 2021] usbhid: USB HID core driver [Fr Mär 5 19:07:49 2021] Initializing XFRM netlink socket [Fr Mär 5 19:07:49 2021] NET: Registered protocol family 17 [Fr Mär 5 19:07:49 2021] Key type dns_resolver registered [Fr Mär 5 19:07:49 2021] Registering SWP/SWPB emulation handler [Fr Mär 5 19:07:49 2021] registered taskstats version 1 [Fr Mär 5 19:07:49 2021] Loading compiled-in X.509 certificates [Fr Mär 5 19:07:49 2021] Key type ._fscrypt registered [Fr Mär 5 19:07:49 2021] Key type .fscrypt registered [Fr Mär 5 19:07:49 2021] Key type fscrypt-provisioning registered [Fr Mär 5 19:07:49 2021] uart-pl011 fe201000.serial: there is not valid maps for state default [Fr Mär 5 19:07:49 2021] uart-pl011 fe201000.serial: cts_event_workaround enabled [Fr Mär 5 19:07:49 2021] fe201000.serial: ttyAMA0 at MMIO 0xfe201000 (irq = 36, base_baud = 0) is a PL011 rev2 [Fr Mär 5 19:07:49 2021] bcm2835-aux-uart fe215040.serial: there is not valid maps for state default [Fr Mär 5 19:07:49 2021] fe215040.serial: ttyS0 at MMIO 0xfe215040 (irq = 37, base_baud = 62500000) is a 16550 [Fr Mär 5 19:07:49 2021] bcm2835-power bcm2835-power: Broadcom BCM2835 power domains driver [Fr Mär 5 19:07:49 2021] mmc-bcm2835 fe300000.mmcnr: mmc_debug:0 mmc_debug2:0 [Fr Mär 5 19:07:49 2021] mmc-bcm2835 fe300000.mmcnr: DMA channel allocated [Fr Mär 5 19:07:49 2021] of_cfs_init [Fr Mär 5 19:07:49 2021] of_cfs_init: OK [Fr Mär 5 19:07:49 2021] mmc1: Controller never released inhibit bit(s). [Fr Mär 5 19:07:49 2021] mmc1: queuing unknown CIS tuple 0x80 (2 bytes) [Fr Mär 5 19:07:49 2021] mmc1: queuing unknown CIS tuple 0x80 (3 bytes) [Fr Mär 5 19:07:49 2021] mmc1: queuing unknown CIS tuple 0x80 (3 bytes) [Fr Mär 5 19:07:49 2021] mmc1: queuing unknown CIS tuple 0x80 (7 bytes) [Fr Mär 5 19:07:49 2021] mmc1: queuing unknown CIS tuple 0x80 (3 bytes) [Fr Mär 5 19:07:49 2021] mmc0: SDHCI controller on fe340000.emmc2 [fe340000.emmc2] using ADMA [Fr Mär 5 19:07:49 2021] Waiting for root device PARTUUID=d7e04f68-02... [Fr Mär 5 19:07:49 2021] random: fast init done [Fr Mär 5 19:07:49 2021] mmc1: new high speed SDIO card at address 0001 [Fr Mär 5 19:07:49 2021] usb 1-1: new high-speed USB device number 2 using xhci_hcd [Fr Mär 5 19:07:49 2021] usb 1-1: New USB device found, idVendor=2109, idProduct=3431, bcdDevice= 4.21 [Fr Mär 5 19:07:49 2021] usb 1-1: New USB device strings: Mfr=0, Product=1, SerialNumber=0 [Fr Mär 5 19:07:49 2021] usb 1-1: Product: USB2.0 Hub [Fr Mär 5 19:07:49 2021] hub 1-1:1.0: USB hub found [Fr Mär 5 19:07:49 2021] hub 1-1:1.0: 4 ports detected [Fr Mär 5 19:07:50 2021] usb 1-1.4: new high-speed USB device number 3 using xhci_hcd [Fr Mär 5 19:07:50 2021] usb 1-1.4: New USB device found, idVendor=152d, idProduct=1576, bcdDevice= 2.04 [Fr Mär 5 19:07:50 2021] usb 1-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [Fr Mär 5 19:07:50 2021] usb 1-1.4: Product: JMS579 [Fr Mär 5 19:07:50 2021] usb 1-1.4: Manufacturer: JMicron [Fr Mär 5 19:07:50 2021] usb 1-1.4: SerialNumber: 987654321029 [Fr Mär 5 19:07:50 2021] scsi host0: uas [Fr Mär 5 19:07:50 2021] scsi 0:0:0:0: Direct-Access CT120BX5 00SSD1 0204 PQ: 0 ANSI: 6 [Fr Mär 5 19:07:50 2021] sd 0:0:0:0: [sda] 234441648 512-byte logical blocks: (120 GB/112 GiB) [Fr Mär 5 19:07:50 2021] sd 0:0:0:0: [sda] 4096-byte physical blocks [Fr Mär 5 19:07:50 2021] sd 0:0:0:0: [sda] Write Protect is off [Fr Mär 5 19:07:50 2021] sd 0:0:0:0: [sda] Mode Sense: 5f 00 00 08 [Fr Mär 5 19:07:50 2021] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [Fr Mär 5 19:07:50 2021] sd 0:0:0:0: [sda] Optimal transfer size 33553920 bytes not a multiple of physical block size (4096 bytes) [Fr Mär 5 19:07:50 2021] sda: sda1 sda2 [Fr Mär 5 19:07:50 2021] sd 0:0:0:0: [sda] Attached SCSI disk [Fr Mär 5 19:07:50 2021] EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null) [Fr Mär 5 19:07:50 2021] VFS: Mounted root (ext4 filesystem) readonly on device 8:2. [Fr Mär 5 19:07:50 2021] devtmpfs: mounted [Fr Mär 5 19:07:50 2021] Freeing unused kernel memory: 2048K [Fr Mär 5 19:07:50 2021] Run /sbin/init as init process [Fr Mär 5 19:07:50 2021] with arguments: [Fr Mär 5 19:07:50 2021] /sbin/init [Fr Mär 5 19:07:50 2021] splash [Fr Mär 5 19:07:50 2021] with environment: [Fr Mär 5 19:07:50 2021] HOME=/ [Fr Mär 5 19:07:50 2021] TERM=linux [Fr Mär 5 19:07:51 2021] systemd[1]: System time before build time, advancing clock. [Fr Mär 5 19:07:51 2021] NET: Registered protocol family 10 [Fr Mär 5 19:07:51 2021] Segment Routing with IPv6 [Fr Mär 5 19:07:51 2021] systemd[1]: systemd 241 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN2 +IDN -PCRE2 default-hierarchy=hybrid) [Fr Mär 5 19:07:51 2021] systemd[1]: Detected architecture arm. [Fr Mär 5 19:07:51 2021] systemd[1]: Set hostname to <raspberrypi>. [Fr Mär 5 19:07:51 2021] random: systemd: uninitialized urandom read (16 bytes read) [Fr Mär 5 19:07:51 2021] random: systemd: uninitialized urandom read (16 bytes read) [Fr Mär 5 19:07:51 2021] systemd[1]: Listening on Journal Socket (/dev/log). [Fr Mär 5 19:07:51 2021] random: systemd: uninitialized urandom read (16 bytes read) [Fr Mär 5 19:07:51 2021] systemd[1]: Listening on Journal Audit Socket. [Fr Mär 5 19:07:52 2021] systemd[1]: Created slice system-getty.slice. [Fr Mär 5 19:07:52 2021] systemd[1]: Created slice system-systemd\x2dfsck.slice. [Fr Mär 5 19:07:52 2021] systemd[1]: Listening on Syslog Socket. [Fr Mär 5 19:07:52 2021] systemd[1]: Listening on fsck to fsckd communication Socket. [Fr Mär 5 19:07:52 2021] systemd[1]: Listening on udev Control Socket. [Fr Mär 5 19:07:52 2021] i2c /dev entries driver [Fr Mär 5 19:07:52 2021] EXT4-fs (sda2): re-mounted. Opts: (null) [Fr Mär 5 19:07:52 2021] systemd-journald[116]: Received request to flush runtime journal from PID 1 [Fr Mär 5 19:07:53 2021] rpivid-mem feb00000.hevc-decoder: rpivid-hevcmem initialised: Registers at 0xfeb00000 length 0x00010000 [Fr Mär 5 19:07:53 2021] rpivid-mem feb10000.rpivid-local-intc: rpivid-intcmem initialised: Registers at 0xfeb10000 length 0x00001000 [Fr Mär 5 19:07:53 2021] rpivid-mem feb20000.h264-decoder: rpivid-h264mem initialised: Registers at 0xfeb20000 length 0x00010000 [Fr Mär 5 19:07:53 2021] rpivid-mem feb30000.vp9-decoder: rpivid-vp9mem initialised: Registers at 0xfeb30000 length 0x00010000 [Fr Mär 5 19:07:53 2021] snd_bcm2835: module is from the staging directory, the quality is unknown, you have been warned. [Fr Mär 5 19:07:53 2021] bcm2835_audio bcm2835_audio: card created with 4 channels [Fr Mär 5 19:07:53 2021] bcm2835_audio bcm2835_audio: card created with 4 channels [Fr Mär 5 19:07:53 2021] vc_sm_cma: module is from the staging directory, the quality is unknown, you have been warned. [Fr Mär 5 19:07:53 2021] mc: Linux media interface: v0.10 [Fr Mär 5 19:07:53 2021] bcm2835_vc_sm_cma_probe: Videocore shared memory driver [Fr Mär 5 19:07:53 2021] [vc_sm_connected_init]: start [Fr Mär 5 19:07:53 2021] [vc_sm_connected_init]: installed successfully [Fr Mär 5 19:07:53 2021] videodev: Linux video capture interface: v2.00 [Fr Mär 5 19:07:53 2021] bcm2835_mmal_vchiq: module is from the staging directory, the quality is unknown, you have been warned. [Fr Mär 5 19:07:53 2021] bcm2835_mmal_vchiq: module is from the staging directory, the quality is unknown, you have been warned. [Fr Mär 5 19:07:53 2021] bcm2835_v4l2: module is from the staging directory, the quality is unknown, you have been warned. [Fr Mär 5 19:07:53 2021] bcm2835_isp: module is from the staging directory, the quality is unknown, you have been warned. [Fr Mär 5 19:07:53 2021] bcm2835_codec: module is from the staging directory, the quality is unknown, you have been warned. [Fr Mär 5 19:07:53 2021] bcm2835-isp bcm2835-isp: Device node output[0] registered as /dev/video13 [Fr Mär 5 19:07:53 2021] bcm2835-isp bcm2835-isp: Device node capture[0] registered as /dev/video14 [Fr Mär 5 19:07:53 2021] bcm2835-isp bcm2835-isp: Device node capture[1] registered as /dev/video15 [Fr Mär 5 19:07:53 2021] bcm2835-isp bcm2835-isp: Device node stats[2] registered as /dev/video16 [Fr Mär 5 19:07:53 2021] bcm2835-isp bcm2835-isp: Register output node 0 with media controller [Fr Mär 5 19:07:53 2021] bcm2835-isp bcm2835-isp: Register capture node 1 with media controller [Fr Mär 5 19:07:53 2021] bcm2835-isp bcm2835-isp: Register capture node 2 with media controller [Fr Mär 5 19:07:53 2021] bcm2835-isp bcm2835-isp: Register capture node 3 with media controller [Fr Mär 5 19:07:53 2021] bcm2835-isp bcm2835-isp: Loaded V4L2 bcm2835-isp [Fr Mär 5 19:07:53 2021] bcm2835-codec bcm2835-codec: Device registered as /dev/video10 [Fr Mär 5 19:07:53 2021] bcm2835-codec bcm2835-codec: Loaded V4L2 decode [Fr Mär 5 19:07:53 2021] bcm2835-codec bcm2835-codec: Device registered as /dev/video11 [Fr Mär 5 19:07:53 2021] bcm2835-codec bcm2835-codec: Loaded V4L2 encode [Fr Mär 5 19:07:53 2021] bcm2835-codec bcm2835-codec: Device registered as /dev/video12 [Fr Mär 5 19:07:53 2021] bcm2835-codec bcm2835-codec: Loaded V4L2 isp [Fr Mär 5 19:07:53 2021] [drm] Initialized v3d 1.0.0 20180419 for fec00000.v3d on minor 0 [Fr Mär 5 19:07:54 2021] cfg80211: Loading compiled-in X.509 certificates for regulatory database [Fr Mär 5 19:07:54 2021] vc4-drm gpu: bound fe600000.firmwarekms (ops vc4_fkms_ops [vc4]) [Fr Mär 5 19:07:54 2021] checking generic (3e997000 12c000) vs hw (0 ffffffffffffffff) [Fr Mär 5 19:07:54 2021] fb0: switching to vc4drmfb from simple [Fr Mär 5 19:07:54 2021] Console: switching to colour dummy device 80x30 [Fr Mär 5 19:07:54 2021] [drm] Initialized vc4 0.0.0 20140616 for gpu on minor 1 [Fr Mär 5 19:07:54 2021] vc4-drm gpu: [drm] HDMI-A-1: EDID is invalid: [Fr Mär 5 19:07:54 2021] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [Fr Mär 5 19:07:54 2021] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [Fr Mär 5 19:07:54 2021] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [Fr Mär 5 19:07:54 2021] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [Fr Mär 5 19:07:54 2021] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [Fr Mär 5 19:07:54 2021] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [Fr Mär 5 19:07:54 2021] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [Fr Mär 5 19:07:54 2021] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [Fr Mär 5 19:07:54 2021] Console: switching to colour frame buffer device 80x30 [Fr Mär 5 19:07:54 2021] vc4-drm gpu: [drm] fb0: vc4drmfb frame buffer device [Fr Mär 5 19:07:54 2021] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7' [Fr Mär 5 19:07:54 2021] sd 0:0:0:0: Attached scsi generic sg0 type 0 [Fr Mär 5 19:07:54 2021] brcmfmac: F1 signature read @0x18000000=0x15264345 [Fr Mär 5 19:07:54 2021] brcmfmac: brcmf_fw_alloc_request: using brcm/brcmfmac43455-sdio for chip BCM4345/6 [Fr Mär 5 19:07:54 2021] usbcore: registered new interface driver brcmfmac [Fr Mär 5 19:07:54 2021] brcmfmac mmc1:0001:1: Direct firmware load for brcm/brcmfmac43455-sdio.raspberrypi,4-model-b.txt failed with error -2 [Fr Mär 5 19:07:54 2021] brcmfmac: brcmf_fw_alloc_request: using brcm/brcmfmac43455-sdio for chip BCM4345/6 [Fr Mär 5 19:07:54 2021] brcmfmac: brcmf_c_preinit_dcmds: Firmware: BCM4345/6 wl0: Jan 4 2021 19:56:29 version 7.45.229 (617f1f5 CY) FWID 01-2dbd9d2e [Fr Mär 5 19:07:55 2021] random: crng init done [Fr Mär 5 19:07:55 2021] random: 7 urandom warning(s) missed due to ratelimiting [Fr Mär 5 19:07:56 2021] uart-pl011 fe201000.serial: no DMA platform data [Fr Mär 5 19:07:57 2021] 8021q: 802.1Q VLAN Support v1.8 [Fr Mär 5 19:07:57 2021] Adding 102396k swap on /var/swap. Priority:-2 extents:1 across:102396k FS [Fr Mär 5 19:07:57 2021] bcmgenet fd580000.ethernet: configuring instance for external RGMII (RX delay) [Fr Mär 5 19:07:57 2021] bcmgenet fd580000.ethernet eth0: Link is Down [Fr Mär 5 19:08:01 2021] broken atomic modeset userspace detected, disabling atomic [Fr Mär 5 19:08:02 2021] bcmgenet fd580000.ethernet eth0: Link is Up - 1Gbps/Full - flow control rx/tx [Fr Mär 5 19:08:02 2021] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready [Fr Mär 5 19:08:03 2021] ICMPv6: process `dhcpcd' is using deprecated sysctl (syscall) net.ipv6.neigh.eth0.retrans_time - use net.ipv6.neigh.eth0.retrans_time_ms instead [Fr Mär 5 19:08:03 2021] fuse: init (API version 7.32) [Fr Mär 5 19:08:03 2021] Bluetooth: Core ver 2.22 [Fr Mär 5 19:08:03 2021] NET: Registered protocol family 31 [Fr Mär 5 19:08:03 2021] Bluetooth: HCI device and connection manager initialized [Fr Mär 5 19:08:03 2021] Bluetooth: HCI socket layer initialized [Fr Mär 5 19:08:03 2021] Bluetooth: L2CAP socket layer initialized [Fr Mär 5 19:08:03 2021] Bluetooth: SCO socket layer initialized [Fr Mär 5 19:08:03 2021] Bluetooth: HCI UART driver ver 2.3 [Fr Mär 5 19:08:03 2021] Bluetooth: HCI UART protocol H4 registered [Fr Mär 5 19:08:03 2021] Bluetooth: HCI UART protocol Three-wire (H5) registered [Fr Mär 5 19:08:03 2021] Bluetooth: HCI UART protocol Broadcom registered [Fr Mär 5 19:08:04 2021] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [Fr Mär 5 19:08:04 2021] Bluetooth: BNEP filters: protocol multicast [Fr Mär 5 19:08:04 2021] Bluetooth: BNEP socket layer initialized [Fr Mär 5 19:08:04 2021] Bluetooth: RFCOMM TTY layer initialized [Fr Mär 5 19:08:04 2021] Bluetooth: RFCOMM socket layer initialized [Fr Mär 5 19:08:04 2021] Bluetooth: RFCOMM ver 1.11 [Fr Mär 5 19:08:47 2021] v3d fec00000.v3d: MMU error from client L2T (0) at 0x2b01000, pte invalid -
@shaky202 Bring das System mal auf den letzten Stand.
-
Die interessante Frage für ioBroker ist was in seinem Logfile steht. Und bitte auch mal den Inhalt von /opt/iobroker/iobroker-data zeigen
-
@thomas-braun wie mache ich das?
-
sudo apt update sudo apt dist-upgrade sudo reboot -
@thomas-braun update ist grade gelaufen, leider keine Veränderung. Ich habe wie gesagt den Pi seit ein paar tagen über die ssd laufen. Nun wollte ich ihn wieder über die SD-Karte starten...leider ohne erfolg. Er bleibt beim booten hängen. Wie erhalte ich den Logfile vom iobroker
-
@shaky202 Was ist denn jetzt am/im PI?
SSD oder SD ?
-
@shaky202 Wat denn nun?
Kommst du auf das System oder nicht?Logfile vom ioBroker liegt in
/opt/iobroker/log/ -
@wendy2702 System ist über SSD erreichbar, über SD nicht mehr. Daher läuft er aktuell wieder über die SSD.
-
@shaky202 Ist doch okay.
-
@thomas-braun hier ist der Log vom iobroker
2021-03-06 01:11:00.757 - [32minfo[39m: host.raspberrypi received SIGTERM 2021-03-06 01:11:00.820 - [32minfo[39m: host.raspberrypi terminated 2021-03-06 01:11:57.360 - [32minfo[39m: host.raspberrypi iobroker.js-controller version 3.2.16 js-controller starting 2021-03-06 01:11:57.366 - [32minfo[39m: host.raspberrypi Copyright (c) 2014-2021 bluefox, 2014 hobbyquaker 2021-03-06 01:11:57.366 - [32minfo[39m: host.raspberrypi hostname: raspberrypi, node: v12.20.2 2021-03-06 01:11:57.367 - [32minfo[39m: host.raspberrypi ip addresses: 192.168.178.155 2a02:908:1084:4ba0:532b:5b95:d3d7:da fe80::46be:d5a0:77f5:87a4 2021-03-06 01:11:57.477 - [31merror[39m: host.raspberrypi Cannot read system.config: null (OK when migrating or restoring) 2021-03-06 01:11:57.573 - [32minfo[39m: host.raspberrypi connected to Objects and States 2021-03-06 01:11:57.621 - [32minfo[39m: host.raspberrypi added notifications configuration of host 2021-03-06 01:11:57.659 - [31merror[39m: host.raspberrypi Cannot find view "system" for search "instance" 2021-03-06 01:11:57.660 - [31merror[39m: host.raspberrypi Could not add notifications config of this host: Could not get notifications setup from instances: Cannot find view "system" 2021-03-06 01:11:57.724 - [32minfo[39m: host.raspberrypi Plugin sentry Sentry Plugin disabled for this process because sending of statistic data is disabled for the system 2021-03-06 01:11:57.731 - [31merror[39m: host.raspberrypi Cannot find view "system" for search "host" 2021-03-06 01:11:57.742 - [31merror[39m: host.raspberrypi Cannot find view "system" for search "state" 2021-03-06 01:11:57.743 - [31merror[39m: host.raspberrypi Cannot find view "system" for search "instance" 2021-03-06 01:11:57.744 - [31merror[39m: host.raspberrypi Could not collect system.host.raspberrypi states to check for obsolete states: Error: Cannot find view "system" 2021-03-06 01:11:57.746 - [31merror[39m: host.raspberrypi _design/system missing - call node iobroker.js setup 2021-03-06 01:23:32.823 - [32minfo[39m: host.raspberrypi iobroker.js-controller version 3.2.16 js-controller starting 2021-03-06 01:23:32.829 - [32minfo[39m: host.raspberrypi Copyright (c) 2014-2021 bluefox, 2014 hobbyquaker 2021-03-06 01:23:32.830 - [32minfo[39m: host.raspberrypi hostname: raspberrypi, node: v12.20.2 2021-03-06 01:23:32.831 - [32minfo[39m: host.raspberrypi ip addresses: 2021-03-06 01:23:32.962 - [31merror[39m: host.raspberrypi Cannot read system.config: null (OK when migrating or restoring) 2021-03-06 01:23:32.972 - [31merror[39m: host.raspberrypi-Server Cannot load /opt/iobroker/iobroker-data/states.json: /opt/iobroker/iobroker-data/states.json: Unexpected end of JSON input. Try last Backup! 2021-03-06 01:23:33.074 - [32minfo[39m: host.raspberrypi connected to Objects and States 2021-03-06 01:23:33.124 - [32minfo[39m: host.raspberrypi added notifications configuration of host 2021-03-06 01:23:33.166 - [31merror[39m: host.raspberrypi Cannot find view "system" for search "instance" 2021-03-06 01:23:33.167 - [31merror[39m: host.raspberrypi Could not add notifications config of this host: Could not get notifications setup from instances: Cannot find view "system" 2021-03-06 01:23:33.191 - [32minfo[39m: host.raspberrypi Plugin sentry Sentry Plugin disabled for this process because sending of statistic data is disabled for the system 2021-03-06 01:23:33.199 - [31merror[39m: host.raspberrypi Cannot find view "system" for search "host" 2021-03-06 01:23:33.211 - [31merror[39m: host.raspberrypi Cannot find view "system" for search "state" 2021-03-06 01:23:33.211 - [31merror[39m: host.raspberrypi Cannot find view "system" for search "instance" 2021-03-06 01:23:33.213 - [31merror[39m: host.raspberrypi Could not collect system.host.raspberrypi states to check for obsolete states: Error: Cannot find view "system" 2021-03-06 01:23:33.214 - [31merror[39m: host.raspberrypi _design/system missing - call node iobroker.js setup 2021-03-06 09:28:29.865 - [32minfo[39m: host.raspberrypi iobroker.js-controller version 3.2.16 js-controller starting 2021-03-06 09:28:29.874 - [32minfo[39m: host.raspberrypi Copyright (c) 2014-2021 bluefox, 2014 hobbyquaker 2021-03-06 09:28:29.875 - [32minfo[39m: host.raspberrypi hostname: raspberrypi, node: v12.20.2 2021-03-06 09:28:29.876 - [32minfo[39m: host.raspberrypi ip addresses: 2021-03-06 09:28:30.007 - [31merror[39m: host.raspberrypi Cannot read system.config: null (OK when migrating or restoring) 2021-03-06 09:28:30.017 - [31merror[39m: host.raspberrypi-Server Cannot load /opt/iobroker/iobroker-data/states.json: /opt/iobroker/iobroker-data/states.json: Unexpected end of JSON input. Try last Backup! 2021-03-06 09:28:30.122 - [32minfo[39m: host.raspberrypi connected to Objects and States 2021-03-06 09:28:30.176 - [32minfo[39m: host.raspberrypi added notifications configuration of host 2021-03-06 09:28:30.218 - [31merror[39m: host.raspberrypi Cannot find view "system" for search "instance" 2021-03-06 09:28:30.220 - [31merror[39m: host.raspberrypi Could not add notifications config of this host: Could not get notifications setup from instances: Cannot find view "system" 2021-03-06 09:28:30.287 - [32minfo[39m: host.raspberrypi Plugin sentry Sentry Plugin disabled for this process because sending of statistic data is disabled for the system 2021-03-06 09:28:30.295 - [31merror[39m: host.raspberrypi Cannot find view "system" for search "host" 2021-03-06 09:28:30.307 - [31merror[39m: host.raspberrypi Cannot find view "system" for search "state" 2021-03-06 09:28:30.307 - [31merror[39m: host.raspberrypi Cannot find view "system" for search "instance" 2021-03-06 09:28:30.309 - [31merror[39m: host.raspberrypi Could not collect system.host.raspberrypi states to check for obsolete states: Error: Cannot find view "system" 2021-03-06 09:28:30.310 - [31merror[39m: host.raspberrypi _design/system missing - call node iobroker.js setup 2021-03-06 11:06:28.943 - [32minfo[39m: host.raspberrypi received SIGTERM 2021-03-06 11:06:29.077 - [32minfo[39m: host.raspberrypi terminated 2021-03-06 11:06:40.437 - [32minfo[39m: host.raspberrypi iobroker.js-controller version 3.2.16 js-controller starting 2021-03-06 11:06:40.445 - [32minfo[39m: host.raspberrypi Copyright (c) 2014-2021 bluefox, 2014 hobbyquaker 2021-03-06 11:06:40.446 - [32minfo[39m: host.raspberrypi hostname: raspberrypi, node: v12.21.0 2021-03-06 11:06:40.447 - [32minfo[39m: host.raspberrypi ip addresses: 2021-03-06 11:06:40.584 - [31merror[39m: host.raspberrypi Cannot read system.config: null (OK when migrating or restoring) 2021-03-06 11:06:40.695 - [32minfo[39m: host.raspberrypi connected to Objects and States 2021-03-06 11:06:40.748 - [32minfo[39m: host.raspberrypi added notifications configuration of host 2021-03-06 11:06:40.791 - [31merror[39m: host.raspberrypi Cannot find view "system" for search "instance" 2021-03-06 11:06:40.792 - [31merror[39m: host.raspberrypi Could not add notifications config of this host: Could not get notifications setup from instances: Cannot find view "system" 2021-03-06 11:06:40.864 - [32minfo[39m: host.raspberrypi Plugin sentry Sentry Plugin disabled for this process because sending of statistic data is disabled for the system 2021-03-06 11:06:40.873 - [31merror[39m: host.raspberrypi Cannot find view "system" for search "host" 2021-03-06 11:06:40.887 - [31merror[39m: host.raspberrypi Cannot find view "system" for search "state" 2021-03-06 11:06:40.888 - [31merror[39m: host.raspberrypi Cannot find view "system" for search "instance" 2021-03-06 11:06:40.890 - [31merror[39m: host.raspberrypi Could not collect system.host.raspberrypi states to check for obsolete states: Error: Cannot find view "system" 2021-03-06 11:06:40.891 - [31merror[39m: host.raspberrypi _design/system missing - call node iobroker.js setup 2021-03-06 11:09:13.278 - [32minfo[39m: host.raspberrypi iobroker.js-controller version 3.2.16 js-controller starting 2021-03-06 11:09:13.284 - [32minfo[39m: host.raspberrypi Copyright (c) 2014-2021 bluefox, 2014 hobbyquaker 2021-03-06 11:09:13.285 - [32minfo[39m: host.raspberrypi hostname: raspberrypi, node: v12.21.0 2021-03-06 11:09:13.286 - [32minfo[39m: host.raspberrypi ip addresses: 2021-03-06 11:09:13.414 - [31merror[39m: host.raspberrypi Cannot read system.config: null (OK when migrating or restoring) 2021-03-06 11:09:13.530 - [32minfo[39m: host.raspberrypi connected to Objects and States 2021-03-06 11:09:13.583 - [32minfo[39m: host.raspberrypi added notifications configuration of host 2021-03-06 11:09:13.632 - [31merror[39m: host.raspberrypi Cannot find view "system" for search "instance" 2021-03-06 11:09:13.634 - [31merror[39m: host.raspberrypi Could not add notifications config of this host: Could not get notifications setup from instances: Cannot find view "system" 2021-03-06 11:09:13.713 - [32minfo[39m: host.raspberrypi Plugin sentry Sentry Plugin disabled for this process because sending of statistic data is disabled for the system 2021-03-06 11:09:13.722 - [31merror[39m: host.raspberrypi Cannot find view "system" for search "host" 2021-03-06 11:09:13.737 - [31merror[39m: host.raspberrypi Cannot find view "system" for search "state" 2021-03-06 11:09:13.738 - [31merror[39m: host.raspberrypi Cannot find view "system" for search "instance" 2021-03-06 11:09:13.740 - [31merror[39m: host.raspberrypi Could not collect system.host.raspberrypi states to check for obsolete states: Error: Cannot find view "system" 2021-03-06 11:09:13.742 - [31merror[39m: host.raspberrypi _design/system missing - call node iobroker.js setup -
@shaky202 besteht die Möglichkeit die Daten für den iobroker von der SD karte zu holen? Ein separates Backup existiert leider nicht.
-
@shaky202 sagte in iobroker weboberfläche ist nicht mehr erreichbar:
Ein separates Backup existiert leider nicht.
Warum nicht? Das mach ich doch als alleralleraller erstes bevor ich das System so auf Links drehe...
Steckt die SD-Karte im Pi?
ls /dev/mmcblk0*mount | sort | grep ^/dev -
@thomas-braun Hab ich gemacht, was bewirkt der Befehl?
pi@raspberrypi:~ $ ls /dev/mmcblk0* /dev/mmcblk0 /dev/mmcblk0p1 /dev/mmcblk0p2 pi@raspberrypi:~ $ mount | sort | grep ^/dev /dev/mmcblk0p1 on /media/pi/boot type vfat (rw,nosuid,nodev,relatime,uid=1000,gid=1000,fmask=0022,dmask=0022,codepage=437,iocharset=ascii,shortname=mixed,showexec,utf8,flush,errors=remount-ro,uhelper=udisks2) /dev/mmcblk0p2 on /media/pi/rootfs type ext4 (rw,nosuid,nodev,relatime,uhelper=udisks2) /dev/sda1 on /boot type vfat (rw,relatime,fmask=0022,dmask=0022,codepage=437,iocharset=ascii,shortname=mixed,errors=remount-ro) /dev/sda2 on / type ext4 (rw,noatime) -
@shaky202 sagte in iobroker weboberfläche ist nicht mehr erreichbar:
/media/pi/rootfs
Wenn du Glück hast findest du deine Daten vom ioBroker noch unterhalb des Pfades.
