[gelöst] Stromausfall Web-Oberfläche öffnet sich nicht mehr
-
@berserker
An der Stelle wird nicht mit sudo herumhantiert!
Und auch nicht 777 rekursiv über ein Verzeichnis gegossen.Kiste rebooten, Ausgabe von
iobroker statusposten.
Zuvor mal versuchen per
iobroker fixden per sudo verursachten Quatsch wieder gerade zu ziehen.
-
Ok
Ich bin dankbar für jeden Tipp.
Verstehen tue ich das alles nicht, ich copy paste nur was anscheinend bei anderen funktioniert haben soll
internal/modules/cjs/loader.js:818 throw err; ^ Error: Cannot find module '/opt/iobroker/node_modules/iobroker.js-controller/iobroker.js' at Function.Module._resolveFilename (internal/modules/cjs/loader.js:815:15) at Function.Module._load (internal/modules/cjs/loader.js:667:27) at Function.executeUserEntryPoint [as runMain] (internal/modules/run_main.js:60:12) at internal/main/run_main_module.js:17:47 { code: 'MODULE_NOT_FOUND', requireStack: [] } -
@berserker Bitte komplette Ein- und Ausgaben posten, damit man sieht auf welches Kommando da wie reagiert wurde.
-
Sorry
pi@pi:~ $ iobroker status internal/modules/cjs/loader.js:818 throw err; ^ Error: Cannot find module '/opt/iobroker/node_modules/iobroker.js-controller/iobroker.js' at Function.Module._resolveFilename (internal/modules/cjs/loader.js:815:15) at Function.Module._load (internal/modules/cjs/loader.js:667:27) at Function.executeUserEntryPoint [as runMain] (internal/modules/run_main.js:60:12) at internal/main/run_main_module.js:17:47 { code: 'MODULE_NOT_FOUND', requireStack: [] } pi@pi:~ $ -
@berserker
Versuch malcd /opt/iobroker/ sudo -H -u iobroker npm install iobroker.js-controllerAn der Stelle ist ein sudo korrekt...
-
Das kommt dabei raus
pi@pi:~ $ cd /opt/iobroker pi@pi:/opt/iobroker $ sudo -H -u iobroker npm install iobroker.js-controller > iobroker.js-controller@3.2.16 preinstall /opt/iobroker/node_modules/iobroker.js-controller > node lib/preinstallCheck.js NPM version: 6.14.12 > authenticate-pam@1.0.2 install /opt/iobroker/node_modules/authenticate-pam > node-gyp rebuild make: Verzeichnis „/opt/iobroker/node_modules/authenticate-pam/build“ wird betreten CXX(target) Release/obj.target/authenticate_pam/authenticate_pam.o ../authenticate_pam.cc: In function ‘void after_doing_auth(uv_work_t*, int)’: ../authenticate_pam.cc:107:87: warning: ‘v8::Local<v8::Value> Nan::MakeCallback(v8::Local<v8::Object>, v8::Local<v8::Function>, int, v8::Local<v8::Value>*)’ is deprecated [-Wdeprecated-declarations] Nan::MakeCallback(Nan::GetCurrentContext()->Global(), Nan::New(m->callback), 1, args); ^ In file included from ../authenticate_pam.cc:23: ../../nan/nan.h:1026:46: note: declared here NAN_DEPRECATED inline v8::Local<v8::Value> MakeCallback( ^~~~~~~~~~~~ ../authenticate_pam.cc:107:87: warning: ‘v8::Local<v8::Value> Nan::MakeCallback(v8::Local<v8::Object>, v8::Local<v8::Function>, int, v8::Local<v8::Value>*)’ is deprecated [-Wdeprecated-declarations] Nan::MakeCallback(Nan::GetCurrentContext()->Global(), Nan::New(m->callback), 1, args); ^ In file included from ../authenticate_pam.cc:23: ../../nan/nan.h:1026:46: note: declared here NAN_DEPRECATED inline v8::Local<v8::Value> MakeCallback( ^~~~~~~~~~~~ ../authenticate_pam.cc: In function ‘Nan::NAN_METHOD_RETURN_TYPE Authenticate(Nan::NAN_METHOD_ARGS_TYPE)’: ../authenticate_pam.cc:147:83: warning: ‘v8::Local<v8::Value> v8::Object::Get(v8::Local<v8::Value>)’ is deprecated: Use maybe version [-Wdeprecated-declarations] Local<Value> res = options->Get(Nan::New<String>("serviceName").ToLocalChecked()); ^ In file included from /home/iobroker/.cache/node-gyp/12.22.1/include/node/v8-internal.h:14, from /home/iobroker/.cache/node-gyp/12.22.1/include/node/v8.h:27, from /home/iobroker/.cache/node-gyp/12.22.1/include/node/node.h:67, from ../../nan/nan.h:56, from ../authenticate_pam.cc:23: /home/iobroker/.cache/node-gyp/12.22.1/include/node/v8.h:3553:51: note: declared here V8_DEPRECATED("Use maybe version", Local<Value> Get(Local<Value> key)); ^~~ /home/iobroker/.cache/node-gyp/12.22.1/include/node/v8config.h:328:3: note: in definition of macro ‘V8_DEPRECATED’ declarator __attribute__((deprecated(message))) ^~~~~~~~~~ ../authenticate_pam.cc:150:69: error: no matching function for call to ‘v8::String::WriteUtf8(char [128], unsigned int)’ serviceName->WriteUtf8(m->serviceName, sizeof(m->serviceName) - 1); ^ In file included from /home/iobroker/.cache/node-gyp/12.22.1/include/node/node.h:67, from ../../nan/nan.h:56, from ../authenticate_pam.cc:23: /home/iobroker/.cache/node-gyp/12.22.1/include/node/v8.h:2878:7: note: candidate: ‘int v8::String::WriteUtf8(v8::Isolate*, char*, int, int*, int) const’ int WriteUtf8(Isolate* isolate, char* buffer, int length = -1, ^~~~~~~~~ /home/iobroker/.cache/node-gyp/12.22.1/include/node/v8.h:2878:7: note: no known conversion for argument 1 from ‘char [128]’ to ‘v8::Isolate*’ ../authenticate_pam.cc:152:69: warning: ‘v8::Local<v8::Value> v8::Object::Get(v8::Local<v8::Value>)’ is deprecated: Use maybe version [-Wdeprecated-declarations] res = options->Get(Nan::New<String>("remoteHost").ToLocalChecked()); ^ In file included from /home/iobroker/.cache/node-gyp/12.22.1/include/node/v8-internal.h:14, from /home/iobroker/.cache/node-gyp/12.22.1/include/node/v8.h:27, from /home/iobroker/.cache/node-gyp/12.22.1/include/node/node.h:67, from ../../nan/nan.h:56, from ../authenticate_pam.cc:23: /home/iobroker/.cache/node-gyp/12.22.1/include/node/v8.h:3553:51: note: declared here V8_DEPRECATED("Use maybe version", Local<Value> Get(Local<Value> key)); ^~~ /home/iobroker/.cache/node-gyp/12.22.1/include/node/v8config.h:328:3: note: in definition of macro ‘V8_DEPRECATED’ declarator __attribute__((deprecated(message))) ^~~~~~~~~~ ../authenticate_pam.cc:155:66: error: no matching function for call to ‘v8::String::WriteUtf8(char [128], unsigned int)’ remoteHost->WriteUtf8(m->remoteHost, sizeof(m->remoteHost) - 1); ^ In file included from /home/iobroker/.cache/node-gyp/12.22.1/include/node/node.h:67, from ../../nan/nan.h:56, from ../authenticate_pam.cc:23: /home/iobroker/.cache/node-gyp/12.22.1/include/node/v8.h:2878:7: note: candidate: ‘int v8::String::WriteUtf8(v8::Isolate*, char*, int, int*, int) const’ int WriteUtf8(Isolate* isolate, char* buffer, int length = -1, ^~~~~~~~~ /home/iobroker/.cache/node-gyp/12.22.1/include/node/v8.h:2878:7: note: no known conversion for argument 1 from ‘char [128]’ to ‘v8::Isolate*’ ../authenticate_pam.cc:160:58: error: no matching function for call to ‘v8::String::WriteUtf8(char [128], unsigned int)’ username->WriteUtf8(m->username, sizeof(m->username) - 1); ^ In file included from /home/iobroker/.cache/node-gyp/12.22.1/include/node/node.h:67, from ../../nan/nan.h:56, from ../authenticate_pam.cc:23: /home/iobroker/.cache/node-gyp/12.22.1/include/node/v8.h:2878:7: note: candidate: ‘int v8::String::WriteUtf8(v8::Isolate*, char*, int, int*, int) const’ int WriteUtf8(Isolate* isolate, char* buffer, int length = -1, ^~~~~~~~~ /home/iobroker/.cache/node-gyp/12.22.1/include/node/v8.h:2878:7: note: no known conversion for argument 1 from ‘char [128]’ to ‘v8::Isolate*’ ../authenticate_pam.cc:161:58: error: no matching function for call to ‘v8::String::WriteUtf8(char [128], unsigned int)’ password->WriteUtf8(m->password, sizeof(m->password) - 1); ^ In file included from /home/iobroker/.cache/node-gyp/12.22.1/include/node/node.h:67, from ../../nan/nan.h:56, from ../authenticate_pam.cc:23: /home/iobroker/.cache/node-gyp/12.22.1/include/node/v8.h:2878:7: note: candidate: ‘int v8::String::WriteUtf8(v8::Isolate*, char*, int, int*, int) const’ int WriteUtf8(Isolate* isolate, char* buffer, int length = -1, ^~~~~~~~~ /home/iobroker/.cache/node-gyp/12.22.1/include/node/v8.h:2878:7: note: no known conversion for argument 1 from ‘char [128]’ to ‘v8::Isolate*’ ../authenticate_pam.cc: At global scope: ../authenticate_pam.cc:170:11: error: variable or field ‘init’ declared void void init(Handle<Object> exports) { ^~~~~~ ../authenticate_pam.cc:170:11: error: ‘Handle’ was not declared in this scope ../authenticate_pam.cc:170:11: note: suggested alternative: ‘rand_r’ void init(Handle<Object> exports) { ^~~~~~ rand_r ../authenticate_pam.cc:170:24: error: expected primary-expression before ‘>’ token void init(Handle<Object> exports) { ^ ../authenticate_pam.cc:170:26: error: ‘exports’ was not declared in this scope void init(Handle<Object> exports) { ^~~~~~~ In file included from ../../nan/nan.h:56, from ../authenticate_pam.cc:23: ../authenticate_pam.cc:175:31: error: ‘init’ was not declared in this scope NODE_MODULE(authenticate_pam, init); ^~~~ /home/iobroker/.cache/node-gyp/12.22.1/include/node/node.h:736:36: note: in definition of macro ‘NODE_MODULE_X’ (node::addon_register_func) (regfunc), \ ^~~~~~~ ../authenticate_pam.cc:175:1: note: in expansion of macro ‘NODE_MODULE’ NODE_MODULE(authenticate_pam, init); ^~~~~~~~~~~ ../authenticate_pam.cc:175:31: note: suggested alternative: ‘int’ NODE_MODULE(authenticate_pam, init); ^~~~ /home/iobroker/.cache/node-gyp/12.22.1/include/node/node.h:736:36: note: in definition of macro ‘NODE_MODULE_X’ (node::addon_register_func) (regfunc), \ ^~~~~~~ ../authenticate_pam.cc:175:1: note: in expansion of macro ‘NODE_MODULE’ NODE_MODULE(authenticate_pam, init); ^~~~~~~~~~~ make: *** [authenticate_pam.target.mk:109: Release/obj.target/authenticate_pam/authenticate_pam.o] Fehler 1 make: Verzeichnis „/opt/iobroker/node_modules/authenticate-pam/build“ wird verlassen gyp ERR! build error gyp ERR! stack Error: `make` failed with exit code: 2 gyp ERR! stack at ChildProcess.onExit (/usr/lib/node_modules/npm/node_modules/node-gyp/lib/build.js:194:23) gyp ERR! stack at ChildProcess.emit (events.js:314:20) gyp ERR! stack at Process.ChildProcess._handle.onexit (internal/child_process.js:276:12) gyp ERR! System Linux 5.10.17-v7l+ gyp ERR! command "/usr/bin/node" "/usr/lib/node_modules/npm/node_modules/node-gyp/bin/node-gyp.js" "rebuild" gyp ERR! cwd /opt/iobroker/node_modules/authenticate-pam gyp ERR! node -v v12.22.1 gyp ERR! node-gyp -v v5.1.0 gyp ERR! not ok > iobroker.js-controller@3.2.16 install /opt/iobroker/node_modules/iobroker.js-controller > node iobroker.js setup first Cannot read system.config: null (OK when migrating or restoring) object 0_userdata.0.example_state created object 0_userdata.0 created object alias.0 created object system.certificates created object system.repositories created object system.config created object enum.functions created object enum.rooms created object system.group.user created object system.group.administrator created object _design/system created The following notifications happened during sync: - Ignoring Directory "admin.admin" because officially not created as meta object. Please remove directory! - Ignoring Directory "alexa2.admin" because officially not created as meta object. Please remove directory! - Ignoring Directory "backitup.admin" because officially not created as meta object. Please remove directory! - Ignoring Directory "deconz.admin" because officially not created as meta object. Please remove directory! - Ignoring Directory "discovery.admin" because officially not created as meta object. Please remove directory! - Ignoring Directory "eufy-security.admin" because officially not created as meta object. Please remove directory! - Ignoring Directory "history.admin" because officially not created as meta object. Please remove directory! - Ignoring Directory "homee.admin" because officially not created as meta object. Please remove directory! - Ignoring Directory "hue.admin" because officially not created as meta object. Please remove directory! - Ignoring Directory "info.admin" because officially not created as meta object. Please remove directory! - Ignoring Directory "javascript.admin" because officially not created as meta object. Please remove directory! - Ignoring Directory "ph803w.admin" because officially not created as meta object. Please remove directory! - Ignoring Directory "sonos.admin" because officially not created as meta object. Please remove directory! - Ignoring Directory "terminal" because officially not created as meta object. Please remove directory! - Ignoring Directory "terminal.admin" because officially not created as meta object. Please remove directory! - Ignoring Directory "web" because officially not created as meta object. Please remove directory! - Ignoring Directory "web.admin" because officially not created as meta object. Please remove directory! - Ignoring Directory "yahka.admin" because officially not created as meta object. Please remove directory! Renamed repository "default to "stable" Renamed repository "latest to "beta" npm WARN optional SKIPPING OPTIONAL DEPENDENCY: fsevents@~2.3.2 (node_modules/chokidar/node_modules/fsevents): npm WARN notsup SKIPPING OPTIONAL DEPENDENCY: Unsupported platform for fsevents@2.3.2: wanted {"os":"darwin","arch":"any"} (current: {"os":"linux","arch":"arm"}) npm WARN optional SKIPPING OPTIONAL DEPENDENCY: osx-temperature-sensor@1.0.7 (node_modules/osx-temperature-sensor): npm WARN notsup SKIPPING OPTIONAL DEPENDENCY: Unsupported platform for osx-temperature-sensor@1.0.7: wanted {"os":"darwin","arch":"any"} (current: {"os":"linux","arch":"arm"}) npm WARN optional SKIPPING OPTIONAL DEPENDENCY: authenticate-pam@1.0.2 (node_modules/authenticate-pam): npm WARN optional SKIPPING OPTIONAL DEPENDENCY: authenticate-pam@1.0.2 install: `node-gyp rebuild` npm WARN optional SKIPPING OPTIONAL DEPENDENCY: Exit status 1 + iobroker.js-controller@3.2.16 added 13 packages from 33 contributors in 35.592s 54 packages are looking for funding run `npm fund` for details ╭────────────────────────────────────────────────────────────────╮ │ │ │ New major version of npm available! 6.14.12 → 7.19.0 │ │ Changelog: https://github.com/npm/cli/releases/tag/v7.19.0 │ │ Run npm install -g npm to update! │ │ │ ╰────────────────────────────────────────────────────────────────╯ pi@pi:/opt/iobroker $ -
@berserker Der erste Teil mit den Fehlern stammt vom terminal-Adapter. Den würde ich rauswerfen, wenn das System wieder läuft.
iobroker restart iobroker status iobroker list instances -
@berserker sagte in Stromausfall Web-Oberfläche öffnet sich nicht mehr:
ich copy paste nur was anscheinend bei anderen funktioniert haben soll
wenn du so etwas machst musst du aber genau darauf achten, für welche Installation diese codes genutzt wurden.
Da hat sich in den 7 Jahren ioBroker einiges geändert -
Okay werde ich machen
Ausgabe ist folgendes:
pi@pi:/opt/iobroker $ iobroker restart pi@pi:/opt/iobroker $ iobroker status iobroker is running on this host. Objects type: file States type: file pi@pi:/opt/iobroker $ iobroker list instances + instance is alive pi@pi:/opt/iobroker $Danke schonmal für die Hilfe!!
-
iobroker list adapters -
-
@berserker Okay.
iobroker add admin -
@berserker sagte in Stromausfall Web-Oberfläche öffnet sich nicht mehr:
Cannot read system.config: null (OK when migrating or restoring)
Da gibt's Arbeit für das Mini HowTo
-
@thomas-braun said in Stromausfall Web-Oberfläche öffnet sich nicht mehr:
iobroker add admin
pi@pi:/opt/iobroker $ iobroker add admin host.pi install adapter admin upload [3] admin.admin /opt/iobroker/node_modules/iobroker.admin/admin/words.js words.js application/javascript upload [2] admin.admin /opt/iobroker/node_modules/iobroker.admin/admin/index_m.html index_m.html text/html upload [1] admin.admin /opt/iobroker/node_modules/iobroker.admin/admin/index.html index.html text/html upload [0] admin.admin /opt/iobroker/node_modules/iobroker.admin/admin/admin.png admin.png image/png host.pi object system.adapter.admin created/updated host.pi create instance admin host.pi object admin.0.info.newsETag created host.pi object admin.0.info.newsfeed created host.pi object admin.0.connected created host.pi object admin.0 created host.pi object admin.0.info created host.pi object system.adapter.admin.upload created host.pi object system.adapter.admin.0.logLevel created host.pi object system.adapter.admin.0.sigKill created host.pi object system.adapter.admin.0.eventLoopLag created host.pi object system.adapter.admin.0.outputCount created host.pi object system.adapter.admin.0.inputCount created host.pi object system.adapter.admin.0.uptime created host.pi object system.adapter.admin.0.memRss created host.pi object system.adapter.admin.0.memHeapTotal created host.pi object system.adapter.admin.0.memHeapUsed created host.pi object system.adapter.admin.0.cputime created host.pi object system.adapter.admin.0.cpu created host.pi object system.adapter.admin.0.compactMode created host.pi object system.adapter.admin.0.connected created host.pi object system.adapter.admin.0.alive created host.pi object system.adapter.admin.0 created pi@pi:/opt/iobroker $ -
@berserker
Läuft der Admin jetzt?iobroker list instances -
Die Web Oberfläche ist wieder da.
Ich lass erstmal die Finger weg bis du etwas dazu sagst.
-
@thomas-braun said in Stromausfall Web-Oberfläche öffnet sich nicht mehr:
iobroker list instances
pi@pi:/opt/iobroker $ iobroker list instances + system.adapter.admin.0 : admin : pi - enabled, port: 8081, bind: 0.0.0.0, run as: admin + instance is alive pi@pi:/opt/iobroker $Das kommt dabei raus
-
@berserker Dann solltest du jetzt die fehlenden Adapter ja nachinstallieren können.
-
Wenn ich jetzt die fehlenden Adapter nachinstalliert, sind die Settings dann noch da ??
Vielen Dank erstmal
-
Wenn ich Adapter installieren möchte, dann steht bei den Adaptern die ich hatte, dass schon einer Installiert ist.
Kann ich zB. den Skripte Adapter irgendwie mit den alten Skripten herunterladen?
