Rega Fehler
-
So leicht kommste uns nicht davon
Erst die funktionierende Admin Seite posten mit JS Controller Version
Und natürlich die Info ob mit der CCU wieder alles läuft. -
@haselchen hehe keine Angst, bevor es nicht läuft, lasse ich euch nicht vom Haken
Installiert gerade -
@haselchen Braucht relativ lange...
pi@raspberrypi:~ $ iobroker upgrade self Update js-controller from @2.2.8 to @3.3.15 NPM version: 6.14.14 npm install iobroker.js-controller@3.3.15 --unsafe-perm --loglevel error --prefix "/opt/iobroker" (System call) -
Hast du vorher iobroker stop eingegeben?
-
@haselchen yes
-
Auf keinen Fall unterbrechen oder Stromlos machen.
Warte einfach mal ab.... -
@haselchen danach passierte lange nichts und danach kam einfach eine neue Eingabezeile
pi@raspberrypi:~ $ iobroker upgrade self Update js-controller from @2.2.8 to @3.3.15 NPM version: 6.14.14 npm install iobroker.js-controller@3.3.15 --unsafe-perm --loglevel error --prefix "/opt/iobroker" (System call) pi@raspberrypi:~ $ -
@chris-d-0
Gib mal in der Reihenfolge einiobroker stop sudo -H -u iobroker npm install iobroker.js-controller iobroker start -
pi@raspberrypi:~ $ iobroker stop pi@raspberrypi:~ $ pi@raspberrypi:~ $ sudo -H -u iobroker npm install iobroker.js-controller npm WARN checkPermissions Missing write access to /home/pi/node_modules/@iobroker npm WARN checkPermissions Missing write access to /home/pi/node_modules npm WARN optional SKIPPING OPTIONAL DEPENDENCY: fsevents@~2.3.2 (node_modules/chokidar/node_modules/fsevents): npm WARN notsup SKIPPING OPTIONAL DEPENDENCY: Unsupported platform for fsevents@2.3.2: wanted {"os":"darwin","arch":"any"} (current: {"os":"linux","arch":"arm"}) npm WARN enoent ENOENT: no such file or directory, open '/home/pi/package.json' npm WARN pi No description npm WARN pi No repository field. npm WARN pi No README data npm WARN pi No license field. npm ERR! code EACCES npm ERR! syscall access npm ERR! path /home/pi/node_modules/@iobroker npm ERR! errno -13 npm ERR! Error: EACCES: permission denied, access '/home/pi/node_modules/@iobroker' npm ERR! [Error: EACCES: permission denied, access '/home/pi/node_modules/@iobroker'] { npm ERR! errno: -13, npm ERR! code: 'EACCES', npm ERR! syscall: 'access', npm ERR! path: '/home/pi/node_modules/@iobroker' npm ERR! } npm ERR! npm ERR! The operation was rejected by your operating system. npm ERR! It is likely you do not have the permissions to access this file as the current user npm ERR! npm ERR! If you believe this might be a permissions issue, please double-check the npm ERR! permissions of the file and its containing directories, or try running npm ERR! the command again as root/Administrator. npm ERR! A complete log of this run can be found in: npm ERR! /home/iobroker/.npm/_logs/2021-08-19T14_20_19_283Z-debug.log -
@chris-d-0 sagte in Rega Fehler:
/home/pi/node_modules/@iobroker'
was hast du da angestellt?
den npm-Befehl in /home/pi ausgeführt???
der muss in /opt/iobroker ausgeführt werden -
cd /opt/iobroker
curl -sL https://iobroker.net/fix.sh | bash -Edit:
sehe ich jetzt erst....wo zum Himmel hast du das alles hin installiert?
-
@homoran @haselchen Nicht bewusst
-
@chris-d-0 sagte in Rega Fehler:
pi@raspberrypi:~ $ sudo -H -u iobroker npm install iobroker.js-controller
da bist du in deinem Home Verzeichnis
Wie man da die Installation wieder rausbekommt weiß ich nicht.Du musst vorher ein
cd /opt/iobrokermachen bevor du den npm-Befehl absetzst -
@homoran @haselchen Holy...
pi@raspberrypi:~ $ cd /opt/iobroker pi@raspberrypi:/opt/iobroker $ sudo -H -u iobroker npm install iobroker.js-controller npm WARN read-shrinkwrap This version of npm is compatible with lockfileVersion@1, but package-lock.json was generated for lockfileVersion@2. I'll try to do my best with it! > iobroker.js-controller@2.2.10 preinstall /opt/iobroker/node_modules/iobroker.js-controller > node lib/preinstallCheck.js NPM version: 6.14.14 > unix-dgram@2.0.3 install /opt/iobroker/node_modules/unix-dgram > node-gyp rebuild make: Verzeichnis „/opt/iobroker/node_modules/unix-dgram/build“ wird betreten CXX(target) Release/obj.target/unix_dgram/src/unix_dgram.o In file included from ../src/unix_dgram.cc:5: ../../nan/nan.h: In function ‘void Nan::AsyncQueueWorker(Nan::AsyncWorker*)’: ../../nan/nan.h:2294:62: warning: cast between incompatible function types from ‘void (*)(uv_work_t*)’ {aka ‘void (*)(uv_work_s*)’} to ‘uv_after_work_cb’ {aka ‘void (*)(uv_work_s*, int)’} [-Wcast-function-type] , reinterpret_cast<uv_after_work_cb>(AsyncExecuteComplete) ^ In file included from ../../nan/nan.h:56, from ../src/unix_dgram.cc:5: ../src/unix_dgram.cc: At global scope: /home/iobroker/.cache/node-gyp/14.17.5/include/node/node.h:758:43: warning: cast between incompatible function types from ‘void (*)(v8::Local<v8::Object>)’ to ‘node::addon_register_func’ {aka ‘void (*)(v8::Local<v8::Object>, v8::Local<v8::Value>, void*)’} [-Wcast-function-type] (node::addon_register_func) (regfunc), \ ^ /home/iobroker/.cache/node-gyp/14.17.5/include/node/node.h:792:3: note: in expansion of macro ‘NODE_MODULE_X’ NODE_MODULE_X(modname, regfunc, NULL, 0) // NOLINT (readability/null_usage) ^~~~~~~~~~~~~ ../src/unix_dgram.cc:404:1: note: in expansion of macro ‘NODE_MODULE’ NODE_MODULE(unix_dgram, Initialize) ^~~~~~~~~~~ SOLINK_MODULE(target) Release/obj.target/unix_dgram.node COPY Release/unix_dgram.node make: Verzeichnis „/opt/iobroker/node_modules/unix-dgram/build“ wird verlassen > ursa-optional@0.9.10 install /opt/iobroker/node_modules/ursa-optional > node rebuild.js ursaNative bindings compilation fail. This is not an issue. Modules that depend on it will use fallbacks. > @serialport/bindings@9.2.0 install /opt/iobroker/node_modules/@serialport/bindings > prebuild-install --tag-prefix @serialport/bindings@ || node-gyp rebuild prebuild-install WARN install No prebuilt binaries found (target=14.17.5 runtime=node arch=arm libc= platform=linux) make: Verzeichnis „/opt/iobroker/node_modules/@serialport/bindings/build“ wird betreten CXX(target) Release/obj.target/bindings/src/serialport.o ../src/serialport.cpp: In function ‘Nan::NAN_METHOD_RETURN_TYPE Open(Nan::NAN_METHOD_ARGS_TYPE)’: ../src/serialport.cpp:78:69: warning: cast between incompatible function types from ‘void (*)(uv_work_t*)’ {aka ‘void (*)(uv_work_s*)’} to ‘uv_after_work_cb’ {aka ‘void (*)(uv_work_s*, int)’} [-Wcast-function-type] uv_queue_work(uv_default_loop(), req, EIO_Open, (uv_after_work_cb)EIO_AfterOpen); ^~~~~~~~~~~~~ ../src/serialport.cpp: In function ‘Nan::NAN_METHOD_RETURN_TYPE Update(Nan::NAN_METHOD_ARGS_TYPE)’: ../src/serialport.cpp:135:71: warning: cast between incompatible function types from ‘void (*)(uv_work_t*)’ {aka ‘void (*)(uv_work_s*)’} to ‘uv_after_work_cb’ {aka ‘void (*)(uv_work_s*, int)’} [-Wcast-function-type] uv_queue_work(uv_default_loop(), req, EIO_Update, (uv_after_work_cb)EIO_AfterUpdate); ^~~~~~~~~~~~~~~ ../src/serialport.cpp: In function ‘Nan::NAN_METHOD_RETURN_TYPE Close(Nan::NAN_METHOD_ARGS_TYPE)’: ../src/serialport.cpp:175:70: warning: cast between incompatible function types from ‘void (*)(uv_work_t*)’ {aka ‘void (*)(uv_work_s*)’} to ‘uv_after_work_cb’ {aka ‘void (*)(uv_work_s*, int)’} [-Wcast-function-type] uv_queue_work(uv_default_loop(), req, EIO_Close, (uv_after_work_cb)EIO_AfterClose); ^~~~~~~~~~~~~~ ../src/serialport.cpp: In function ‘Nan::NAN_METHOD_RETURN_TYPE Flush(Nan::NAN_METHOD_ARGS_TYPE)’: ../src/serialport.cpp:215:70: warning: cast between incompatible function types from ‘void (*)(uv_work_t*)’ {aka ‘void (*)(uv_work_s*)’} to ‘uv_after_work_cb’ {aka ‘void (*)(uv_work_s*, int)’} [-Wcast-function-type] uv_queue_work(uv_default_loop(), req, EIO_Flush, (uv_after_work_cb)EIO_AfterFlush); ^~~~~~~~~~~~~~ ../src/serialport.cpp: In function ‘Nan::NAN_METHOD_RETURN_TYPE Set(Nan::NAN_METHOD_ARGS_TYPE)’: ../src/serialport.cpp:271:68: warning: cast between incompatible function types from ‘void (*)(uv_work_t*)’ {aka ‘void (*)(uv_work_s*)’} to ‘uv_after_work_cb’ {aka ‘void (*)(uv_work_s*, int)’} [-Wcast-function-type] uv_queue_work(uv_default_loop(), req, EIO_Set, (uv_after_work_cb)EIO_AfterSet); ^~~~~~~~~~~~ ../src/serialport.cpp: In function ‘Nan::NAN_METHOD_RETURN_TYPE Get(Nan::NAN_METHOD_ARGS_TYPE)’: ../src/serialport.cpp:316:68: warning: cast between incompatible function types from ‘void (*)(uv_work_t*)’ {aka ‘void (*)(uv_work_s*)’} to ‘uv_after_work_cb’ {aka ‘void (*)(uv_work_s*, int)’} [-Wcast-function-type] uv_queue_work(uv_default_loop(), req, EIO_Get, (uv_after_work_cb)EIO_AfterGet); ^~~~~~~~~~~~ ../src/serialport.cpp: In function ‘Nan::NAN_METHOD_RETURN_TYPE GetBaudRate(Nan::NAN_METHOD_ARGS_TYPE)’: ../src/serialport.cpp:366:76: warning: cast between incompatible function types from ‘void (*)(uv_work_t*)’ {aka ‘void (*)(uv_work_s*)’} to ‘uv_after_work_cb’ {aka ‘void (*)(uv_work_s*, int)’} [-Wcast-function-type] uv_queue_work(uv_default_loop(), req, EIO_GetBaudRate, (uv_after_work_cb)EIO_AfterGetBaudRate); ^~~~~~~~~~~~~~~~~~~~ ../src/serialport.cpp: In function ‘Nan::NAN_METHOD_RETURN_TYPE Drain(Nan::NAN_METHOD_ARGS_TYPE)’: ../src/serialport.cpp:412:70: warning: cast between incompatible function types from ‘void (*)(uv_work_t*)’ {aka ‘void (*)(uv_work_s*)’} to ‘uv_after_work_cb’ {aka ‘void (*)(uv_work_s*, int)’} [-Wcast-function-type] uv_queue_work(uv_default_loop(), req, EIO_Drain, (uv_after_work_cb)EIO_AfterDrain); ^~~~~~~~~~~~~~ ../src/serialport.cpp: At global scope: ../src/serialport.cpp:433:28: warning: unnecessary parentheses in declaration of ‘ToParityEnum’ [-Wparentheses] SerialPortParity NAN_INLINE(ToParityEnum(const v8::Local<v8::String>& v8str)) { ^ ../src/serialport.cpp:452:30: warning: unnecessary parentheses in declaration of ‘ToStopBitEnum’ [-Wparentheses] SerialPortStopBits NAN_INLINE(ToStopBitEnum(double stopBits)) { ^ In file included from ../node_modules/nan/nan.h:58, from ../src/./serialport.h:13, from ../src/serialport.cpp:1: /home/iobroker/.cache/node-gyp/14.17.5/include/node/node.h:758:43: warning: cast between incompatible function types from ‘void (*)(Nan::ADDON_REGISTER_FUNCTION_ARGS_TYPE)’ {aka ‘void (*)(v8::Local<v8::Object>)’} to ‘node::addon_register_func’ {aka ‘void (*)(v8::Local<v8::Object>, v8::Local<v8::Value>, void*)’} [-Wcast-function-type] (node::addon_register_func) (regfunc), \ ^ /home/iobroker/.cache/node-gyp/14.17.5/include/node/node.h:792:3: note: in expansion of macro ‘NODE_MODULE_X’ NODE_MODULE_X(modname, regfunc, NULL, 0) // NOLINT (readability/null_usage) ^~~~~~~~~~~~~ ../src/serialport.cpp:486:1: note: in expansion of macro ‘NODE_MODULE’ NODE_MODULE(serialport, init); ^~~~~~~~~~~ CXX(target) Release/obj.target/bindings/src/serialport_unix.o ../src/serialport_unix.cpp: In function ‘int setup(int, OpenBaton*)’: ../src/serialport_unix.cpp:176:60: warning: ‘%s’ directive output may be truncated writing up to 1023 bytes into a region of size 1005 [-Wformat-truncation=] snprintf(data->errorString, sizeof(data->errorString), "Error %s Cannot open %s", strerror(errno), data->path); ^~~~~~~~~~~~~~~~~~~~~~~~~ ../src/serialport_unix.cpp:176:13: note: ‘snprintf’ output 20 or more bytes (assuming 1043) into a destination of size 1024 snprintf(data->errorString, sizeof(data->errorString), "Error %s Cannot open %s", strerror(errno), data->path); ~~~~~~~~^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ ../src/serialport_unix.cpp: In function ‘void EIO_Open(uv_work_t*)’: ../src/serialport_unix.cpp:86:60: warning: ‘%s’ directive output may be truncated writing up to 1023 bytes into a region of size 1003 [-Wformat-truncation=] snprintf(data->errorString, sizeof(data->errorString), "Error: %s, cannot open %s", strerror(errno), data->path); ^~~~~~~~~~~~~~~~~~~~~~~~~~~ ../src/serialport_unix.cpp:86:13: note: ‘snprintf’ output 22 or more bytes (assuming 1045) into a destination of size 1024 snprintf(data->errorString, sizeof(data->errorString), "Error: %s, cannot open %s", strerror(errno), data->path); ~~~~~~~~^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ CXX(target) Release/obj.target/bindings/src/poller.o CXX(target) Release/obj.target/bindings/src/serialport_linux.o SOLINK_MODULE(target) Release/obj.target/bindings.node COPY Release/bindings.node make: Verzeichnis „/opt/iobroker/node_modules/@serialport/bindings/build“ wird verlassen > sharp@0.28.1 install /opt/iobroker/node_modules/sharp > (node install/libvips && node install/dll-copy && prebuild-install) || (node-gyp rebuild && node install/dll-copy) sharp: Using cached /home/iobroker/.npm/_libvips/libvips-8.10.6-linux-armv7.tar.br prebuild-install WARN install No prebuilt binaries found (target=3 runtime=napi arch=arm libc= platform=linux) make: Verzeichnis „/opt/iobroker/node_modules/sharp/build“ wird betreten CC(target) Release/obj.target/nothing/../node-addon-api/nothing.o AR(target) Release/obj.target/../node-addon-api/nothing.a COPY Release/nothing.a TOUCH Release/obj.target/libvips-cpp.stamp CXX(target) Release/obj.target/sharp/src/common.o CXX(target) Release/obj.target/sharp/src/metadata.o CXX(target) Release/obj.target/sharp/src/stats.o CXX(target) Release/obj.target/sharp/src/operations.o CXX(target) Release/obj.target/sharp/src/pipeline.o CXX(target) Release/obj.target/sharp/src/utilities.o CXX(target) Release/obj.target/sharp/src/sharp.o SOLINK_MODULE(target) Release/obj.target/sharp.node COPY Release/sharp.node make: Verzeichnis „/opt/iobroker/node_modules/sharp/build“ wird verlassen > canvas@2.8.0 install /opt/iobroker/node_modules/canvas > node-pre-gyp install --fallback-to-build node-pre-gyp ERR! install response status 404 Not Found on https://github.com/Automattic/node-canvas/releases/download/v2.8.0/canvas-v2.8.0-node-v83-linux-glibc-arm.tar.gz node-pre-gyp WARN Pre-built binaries not installable for canvas@2.8.0 and node@14.17.5 (node-v83 ABI, glibc) (falling back to source compile with node-gyp) node-pre-gyp WARN Hit error response status 404 Not Found on https://github.com/Automattic/node-canvas/releases/download/v2.8.0/canvas-v2.8.0-node-v83-linux-glibc-arm.tar.gz make: Verzeichnis „/opt/iobroker/node_modules/canvas/build“ wird betreten SOLINK_MODULE(target) Release/obj.target/canvas-postbuild.node COPY Release/canvas-postbuild.node CXX(target) Release/obj.target/canvas/src/backend/Backend.o CXX(target) Release/obj.target/canvas/src/backend/ImageBackend.o CXX(target) Release/obj.target/canvas/src/backend/PdfBackend.o CXX(target) Release/obj.target/canvas/src/backend/SvgBackend.o CXX(target) Release/obj.target/canvas/src/bmp/BMPParser.o ../src/bmp/BMPParser.cc: In member function ‘void BMPParser::Parser::parse(uint8_t*, int, uint8_t*)’: ../src/bmp/BMPParser.cc:186:16: warning: comparison of integer expressions of different signedness: ‘int’ and ‘unsigned int’ [-Wsign-compare] E(ptr - data > imgdOffset, "image data overlaps with another structure"); ~~~~~~~~~~~^~~~~~~~~~~~ ../src/bmp/BMPParser.cc:10:25: note: in definition of macro ‘E’ #define E(cond, msg) if(cond) return setErr(msg) ^~~~ ../src/bmp/BMPParser.cc:201:27: warning: comparison of integer expressions of different signedness: ‘uint32_t’ {aka ‘unsigned int’} and ‘int’ [-Wsign-compare] E(ptr - data + imgdSize > len, "not enough image data"); ~~~~~~~~~~~~~~~~~~~~~~^~~~~ ../src/bmp/BMPParser.cc:10:25: note: in definition of macro ‘E’ #define E(cond, msg) if(cond) return setErr(msg) ^~~~ CXX(target) Release/obj.target/canvas/src/Backends.o CXX(target) Release/obj.target/canvas/src/Canvas.o CXX(target) Release/obj.target/canvas/src/CanvasGradient.o CXX(target) Release/obj.target/canvas/src/CanvasPattern.o CXX(target) Release/obj.target/canvas/src/CanvasRenderingContext2d.o CXX(target) Release/obj.target/canvas/src/closure.o CXX(target) Release/obj.target/canvas/src/color.o CXX(target) Release/obj.target/canvas/src/Image.o CXX(target) Release/obj.target/canvas/src/ImageData.o CXX(target) Release/obj.target/canvas/src/init.o CXX(target) Release/obj.target/canvas/src/register_font.o SOLINK_MODULE(target) Release/obj.target/canvas.node COPY Release/canvas.node make: Verzeichnis „/opt/iobroker/node_modules/canvas/build“ wird verlassen > diskusage@1.1.3 install /opt/iobroker/node_modules/diskusage > node-gyp rebuild make: Verzeichnis „/opt/iobroker/node_modules/diskusage/build“ wird betreten CXX(target) Release/obj.target/diskusage/src/main.o In file included from ../src/main.cpp:3: ../../nan/nan.h: In function ‘void Nan::AsyncQueueWorker(Nan::AsyncWorker*)’: ../../nan/nan.h:2294:62: warning: cast between incompatible function types from ‘void (*)(uv_work_t*)’ {aka ‘void (*)(uv_work_s*)’} to ‘uv_after_work_cb’ {aka ‘void (*)(uv_work_s*, int)’} [-Wcast-function-type] , reinterpret_cast<uv_after_work_cb>(AsyncExecuteComplete) ^ In file included from ../../nan/nan.h:56, from ../src/main.cpp:3: ../src/main.cpp: At global scope: /home/iobroker/.cache/node-gyp/14.17.5/include/node/node.h:758:43: warning: cast between incompatible function types from ‘void (*)(v8::Local<v8::Object>)’ to ‘node::addon_register_func’ {aka ‘void (*)(v8::Local<v8::Object>, v8::Local<v8::Value>, void*)’} [-Wcast-function-type] (node::addon_register_func) (regfunc), \ ^ /home/iobroker/.cache/node-gyp/14.17.5/include/node/node.h:792:3: note: in expansion of macro ‘NODE_MODULE_X’ NODE_MODULE_X(modname, regfunc, NULL, 0) // NOLINT (readability/null_usage) ^~~~~~~~~~~~~ ../src/main.cpp:42:1: note: in expansion of macro ‘NODE_MODULE’ NODE_MODULE(diskusage, Init) ^~~~~~~~~~~ CXX(target) Release/obj.target/diskusage/src/diskusage_posix.o SOLINK_MODULE(target) Release/obj.target/diskusage.node COPY Release/diskusage.node make: Verzeichnis „/opt/iobroker/node_modules/diskusage/build“ wird verlassen > iobroker@2.0.3 install /opt/iobroker/node_modules/iobroker > node lib/checkVersions.js NPM version: 6.14.14 > iobroker.vis@1.4.3 install /opt/iobroker/node_modules/iobroker.vis > node main.js --install > iobroker.js-controller@2.2.10 install /opt/iobroker/node_modules/iobroker.js-controller > node iobroker.js setup first The following notifications happened during sync: - Ignoring Directory "hm-rega" because officially not created as meta object. Please remove directory! > acme-v2@1.8.6 postinstall /opt/iobroker/node_modules/acme-v2 > node scripts/postinstall Greenlock and ACME.js v3 are on the way! Watch for updates at https://indiegogo.com/at/greenlock > iobroker@2.0.3 postinstall /opt/iobroker/node_modules/iobroker > node lib/install.js ╭─────────────────────────────────────────────────────────╮ │ │ │ Manual installation of ioBroker is no longer supported │ │ on Linux, OSX and FreeBSD! │ │ Please refer to the documentation on how to install it! │ │ https://github.com/ioBroker/ioBroker/wiki/Installation │ │ │ ╰─────────────────────────────────────────────────────────╯ npm WARN optional SKIPPING OPTIONAL DEPENDENCY: fsevents@~2.3.2 (node_modules/chokidar/node_modules/fsevents): npm WARN notsup SKIPPING OPTIONAL DEPENDENCY: Unsupported platform for fsevents@2.3.2: wanted {"os":"darwin","arch":"any"} (current: {"os":"linux","arch":"arm"}) npm WARN optional SKIPPING OPTIONAL DEPENDENCY: osx-temperature-sensor@1.0.7 (node_modules/osx-temperature-sensor): npm WARN notsup SKIPPING OPTIONAL DEPENDENCY: Unsupported platform for osx-temperature-sensor@1.0.7: wanted {"os":"darwin","arch":"any"} (current: {"os":"linux","arch":"arm"}) npm ERR! code ELIFECYCLE npm ERR! errno 100 npm ERR! iobroker@2.0.3 postinstall: `node lib/install.js` npm ERR! Exit status 100 npm ERR! npm ERR! Failed at the iobroker@2.0.3 postinstall script. npm ERR! This is probably not a problem with npm. There is likely additional logging output above. npm ERR! A complete log of this run can be found in: npm ERR! /home/iobroker/.npm/_logs/2021-08-19T14_49_50_171Z-debug.log -
@chris-d-0 sagte in Rega Fehler:
Ignoring Directory "hm-rega" because officially not created as meta object. Please remove directory!
oops - passt das irgendwie??
@chris-d-0 sagte in Rega Fehler:
npm ERR! errno 100 npm ERR! iobroker@2.0.3 postinstall:
node lib/install.jsnpm ERR! Exit status 100was ist denn da jetzt faul?
iobroker stop
iobroker fix
iobroker start -
@homoran said in Rega Fehler:
@chris-d-0 sagte in Rega Fehler:
Ignoring Directory "hm-rega" because officially not created as meta object. Please remove directory!
oops - passt das irgendwie??
euhm keine Ahnung
-
@homoran said in Rega Fehler:
@chris-d-0 sagte in Rega Fehler:
npm ERR! errno 100 npm ERR! iobroker@2.0.3 postinstall:
node lib/install.jsnpm ERR! Exit status 100was ist denn da jetzt faul?
iobroker stop
iobroker fixmache ich
iobroker start -
pi@raspberrypi:~ $ iobroker start pi@raspberrypi:~ $ iobroker update -i Used repository: Stable (default) hash changed or no sources cached => force download of new sources update done Adapter "admin" : 5.1.23 , installed 5.1.23 Adapter "backitup" : 2.1.13 , installed 2.1.13 Adapter "cloud" : 4.1.0 , installed 4.1.0 Adapter "discovery" : 2.7.0 , installed 2.7.0 Adapter "echarts" : 0.4.13 , installed 0.4.13 Adapter "email" : 1.0.10 , installed 1.0.10 Adapter "fb-checkpresence": 1.1.7 , installed 1.1.7 Adapter "fritzdect" : 2.1.15 , installed 2.1.15 Adapter "habpanel" : 0.4.3 , installed 0.4.3 Adapter "history" : 1.9.13 , installed 1.9.13 Adapter "hm-rega" : 3.0.29 , installed 3.0.29 Adapter "hm-rpc" : 1.14.43 , installed 1.14.43 Adapter "ical" : 1.11.2 , installed 1.11.2 Adapter "info" : 1.9.8 , installed 1.9.8 Adapter "iot" : 1.8.22 , installed 1.8.22 Adapter "javascript" : 5.2.8 , installed 5.2.8 Controller "js-controller" : 3.3.15 , installed 2.2.10 [Updateable] Adapter "material" : 1.0.4 , installed 1.0.4 Adapter "mobile" : 1.0.1 , installed 1.0.1 Adapter "openweathermap": 0.1.0 , installed 0.1.0 Adapter "ping" : 1.5.0 , installed 1.5.0 Adapter "samsung" : 0.2.9 , installed 0.2.9 Adapter "simple-api" : 2.6.1 , installed 2.6.1 Adapter "socketio" : 3.1.4 , installed 3.1.4 Adapter "sonos" : 2.1.1 , installed 2.1.1 Adapter "synology" : 1.0.0 , installed 1.0.0 Adapter "telegram" : 1.10.0 , installed 1.10.0 Adapter "tr-064" : 4.2.14 , installed 4.2.14 Adapter "viessmann" : 1.3.4 , installed 1.3.4 Adapter "vis" : 1.4.3 , installed 1.4.3 Adapter "web" : 3.4.7 , installed 3.4.7 Adapter "whatsapp-cmb" : 0.1.6 , installed 0.1.6 -
-
@thomas-braun said in Rega Fehler:
iobroker stop iobroker update iobroker upgrade self
pi@raspberrypi:~ $ iobroker stop pi@raspberrypi:~ $ iobroker update Used repository: Stable (default) hash changed or no sources cached => force download of new sources update done Adapter "admin" : 5.1.23 , installed 5.1.23 Adapter "airconwithme" : 0.0.3 Adapter "airzone" : 1.0.4 Adapter "alarm" : 2.0.2 Adapter "alexa2" : 3.9.3 Adapter "alias-manager" : 1.2.3 Adapter "alpha2" : 1.0.0 Adapter "amazon-dash" : 1.1.0 Adapter "artnet" : 1.2.2 Adapter "asterisk" : 1.0.6 Adapter "asuswrt" : 1.0.1 Adapter "b-control-em" : 0.2.1 Adapter "backitup" : 2.1.13 , installed 2.1.13 Adapter "beckhoff" : 1.4.1 Adapter "benq" : 0.2.4 Adapter "binance" : 1.1.3 Adapter "ble" : 0.12.0 Adapter "bluelink" : 1.0.7 Adapter "bmw" : 2.0.0 Adapter "bosesoundtouch": 0.10.0 Adapter "botvac" : 1.0.0 Adapter "bring" : 1.7.7 Adapter "broadlink2" : 2.0.3 Adapter "bsblan" : 0.2.2 Adapter "bshb" : 0.1.13 Adapter "bydbatt" : 1.0.5 Adapter "bydhvs" : 1.2.3 Adapter "chromecast" : 2.3.1 Adapter "cloud" : 4.1.0 , installed 4.1.0 Adapter "comfoair" : 1.1.3 Adapter "contactid" : 1.0.2 Adapter "coronavirus-statistics": 0.6.3 Adapter "countdown" : 1.2.3 Adapter "cul" : 1.3.5 Adapter "daikin" : 1.3.3 Adapter "daswetter" : 3.0.7 Adapter "deconz" : 1.3.19 Adapter "denon" : 1.11.2 Adapter "device-reminder": 1.2.9 Adapter "devices" : 1.0.9 Adapter "digitalstrom" : 2.2.1 Adapter "discovergy" : 0.5.4 Adapter "discovery" : 2.7.0 , installed 2.7.0 Adapter "divera247" : 0.1.2 Adapter "doorio" : 2.0.1 Adapter "ds18b20" : 1.4.1 Adapter "dwd" : 2.7.7 Adapter "dysonairpurifier": 0.9.2 Adapter "easee" : 1.0.2 Adapter "ebus" : 2.2.5 Adapter "echarts" : 0.4.13 , installed 0.4.13 Adapter "ecovacs-deebot": 1.2.1 Adapter "egigeozone" : 0.1.2 Adapter "ekey" : 1.1.0 Adapter "email" : 1.0.10 , installed 1.0.10 Adapter "emby" : 1.0.2 Adapter "energymanager" : 1.3.3 Adapter "enet" : 1.0.1 Adapter "epson_ecotank_et_2750": 0.0.5 Adapter "epson_stylus_px830": 0.2.1 Adapter "epson_xp540" : 1.0.6 Adapter "exchangerates" : 0.0.14 Adapter "fahrplan" : 1.0.7 Adapter "fakeroku" : 0.2.1 Adapter "fb-checkpresence": 1.1.7 , installed 1.1.7 Adapter "feiertage" : 1.0.17 Adapter "fhem" : 1.6.1 Adapter "find-my-iphone": 0.2.15 Adapter "firetv" : 1.0.0 Adapter "flot" : 1.10.6 Adapter "followthesun" : 0.3.5 Adapter "foobar2000" : 2.0.4 Adapter "fritzbox" : 0.2.1 Adapter "fritzdect" : 2.1.15 , installed 2.1.15 Adapter "fronius" : 1.0.5 Adapter "frontier_silicon": 0.0.10 Adapter "fuelpricemonitor": 0.2.6 Adapter "fullcalendar" : 1.1.0 Adapter "fullybrowser" : 2.0.8 Adapter "g-homa" : 0.5.3 Adapter "geofency" : 1.0.3 Adapter "go-e" : 1.0.15 Adapter "growatt" : 1.0.1 Adapter "gruenbeck" : 0.0.30 Adapter "haassohn" : 1.0.4 Adapter "habpanel" : 0.4.3 , installed 0.4.3 Adapter "haier" : 1.0.4 Adapter "ham" : 4.0.2 Adapter "ham-wemo" : 2.0.0 Adapter "harmony" : 1.2.2 Adapter "heatingcontrol": 2.4.3 Adapter "heos" : 1.8.6 Adapter "heytech" : 1.0.0 Adapter "hid" : 0.1.17 Adapter "history" : 1.9.13 , installed 1.9.13 Adapter "hm-rega" : 3.0.29 , installed 3.0.29 Adapter "hm-rpc" : 1.14.43 , installed 1.14.43 Adapter "hmip" : 1.13.0 Adapter "homeconnect" : 0.0.36 Adapter "homee" : 1.2.0 Adapter "homepilot" : 1.0.3 Adapter "hp-ilo" : 1.0.6 Adapter "hs100" : 2.0.6 Adapter "hue" : 3.5.19 Adapter "hue-extended" : 2.0.0 Adapter "i2c" : 1.2.0 Adapter "ical" : 1.11.2 , installed 1.11.2 Adapter "icons-addictive-flavour-png": 0.1.0 Adapter "icons-fatcow-hosting": 0.1.0 Adapter "icons-icons8" : 0.0.1 Adapter "icons-material-png": 0.1.0 Adapter "icons-material-svg": 0.1.0 Adapter "icons-mfd-png" : 1.0.2 Adapter "icons-mfd-svg" : 1.0.2 Adapter "icons-open-icon-library-png": 0.1.2 Adapter "icons-ultimate-png": 1.0.1 Adapter "influxdb" : 1.9.5 Adapter "info" : 1.9.8 , installed 1.9.8 Adapter "innogy-smarthome": 0.3.7 Adapter "iogo" : 0.7.0 Adapter "iot" : 1.8.22 , installed 1.8.22 Adapter "iqontrol" : 1.8.2 Adapter "jarvis" : 2.2.1 Adapter "javascript" : 5.2.8 , installed 5.2.8 Adapter "jeelink" : 0.1.0 Controller "js-controller" : 3.3.15 , installed 2.2.10 [Updateable] Adapter "kecontact" : 1.2.3 Adapter "klf200" : 1.0.1 Adapter "km200" : 1.1.6 Adapter "knmi-weather" : 1.0.0 Adapter "knx" : 1.0.45 Adapter "kodi" : 2.0.5 Adapter "kostal-piko-ba": 1.1.9 Adapter "kress" : 2.5.5 Adapter "lametric" : 1.3.2 Adapter "landroid" : 1.0.3 Adapter "lcn" : 1.0.2 Adapter "legrand-ecocompteur": 1.0.0 Adapter "letrika_comgw" : 0.0.5 Adapter "lg-ess-home" : 0.0.10 Adapter "lgtv" : 1.1.10 Adapter "lgtv-rs" : 0.1.1 Adapter "lgtv11" : 1.0.5 Adapter "lifx" : 0.1.0 Adapter "lightify" : 0.2.16 Adapter "link" : 0.5.10 Adapter "linkeddevices" : 1.4.3 Adapter "linktap" : 0.1.8 Adapter "linux-control" : 1.1.2 Adapter "logparser" : 1.1.0 Adapter "lovelace" : 2.0.4 Adapter "loxone" : 2.2.3 Adapter "luftdaten" : 1.0.3 Adapter "lupusec" : 1.3.5 Adapter "luxtronik1" : 0.3.1 Adapter "material" : 1.0.4 , installed 1.0.4 Adapter "maxcube" : 1.0.4 Adapter "maxcul" : 1.3.1 Adapter "mbus" : 2.3.4 Adapter "mclighting" : 0.1.2 Adapter "megad" : 1.2.1 Adapter "megadd" : 0.2.0 Adapter "megaesp" : 0.1.0 Adapter "melcloud" : 1.1.4 Adapter "mercedesme" : 0.0.54 Adapter "mercury" : 0.1.4 Adapter "meross" : 1.6.3 Adapter "meteoalarm" : 2.0.2 Adapter "midea" : 0.0.6 Adapter "miele" : 0.1.5 Adapter "mielecloudservice": 4.2.0 Adapter "mihome" : 1.3.7 Adapter "mihome-lamp" : 1.1.0 Adapter "mihome-plug" : 0.2.1 Adapter "mihome-vacuum" : 3.2.2 Adapter "mikrotik" : 1.0.16 Adapter "milight" : 0.3.6 Adapter "milight-smart-light": 1.2.0 Adapter "minuvis" : 1.4.0 Adapter "mobile" : 1.0.1 , installed 1.0.1 Adapter "modbus" : 3.4.11 Adapter "moma" : 1.2.8 Adapter "mpd" : 1.0.6 Adapter "mqtt" : 2.4.0 Adapter "mqtt-client" : 1.4.0 Adapter "musiccast" : 0.1.5 Adapter "mydlink" : 1.1.12 Adapter "mysensors" : 2.0.1 Adapter "nanoleaf-lightpanels": 1.2.0 Adapter "net-tools" : 0.1.5 Adapter "netatmo" : 1.4.3 Adapter "netatmo-crawler": 0.5.1 Adapter "nibeuplink" : 0.4.0 Adapter "nina" : 0.0.25 Adapter "node-red" : 2.4.0 Adapter "nuki" : 1.5.0 Adapter "nuki-extended" : 2.3.1 Adapter "nut" : 1.5.0 Adapter "octoprint" : 1.1.1 Adapter "odl" : 1.1.4 Adapter "oilfox" : 0.0.5 Adapter "omnicomm-lls" : 0.0.7 Adapter "onkyo" : 2.1.0 Adapter "onvif" : 0.4.4 Adapter "openhab" : 1.1.0 Adapter "openligadb" : 1.1.0 Adapter "openweathermap": 0.1.0 , installed 0.1.0 Adapter "opi" : 0.1.1 Adapter "oppoplayer" : 0.2.4 Adapter "owfs" : 0.6.4 Adapter "owntracks" : 1.0.0 Adapter "panasonic-viera": 1.0.2 Adapter "parser" : 1.0.7 Adapter "paw" : 0.0.7 Adapter "pegelalarm" : 1.2.0 Adapter "ph803w" : 1.0.1 Adapter "phantomjs" : 1.1.2 Adapter "pi-hole" : 1.3.2 Adapter "piface" : 1.0.0 Adapter "pimatic" : 0.3.0 Adapter "ping" : 1.5.0 , installed 1.5.0 Adapter "places" : 1.0.0 Adapter "plenticore" : 2.2.0 Adapter "plex" : 0.8.11 Adapter "plexconnect" : 0.0.7 Adapter "pollenflug" : 1.0.6 Adapter "proxmox" : 1.3.3 Adapter "proxy" : 1.2.2 Adapter "pushbullet" : 0.0.11 Adapter "pushover" : 2.0.5 Adapter "pushsafer" : 1.0.3 Adapter "radar2" : 1.0.9 Adapter "radiohead" : 1.1.1 Adapter "rflink" : 2.1.6 Adapter "rickshaw" : 1.0.0 Adapter "ring" : 1.2.3 Adapter "robonect" : 0.1.3 Adapter "roomba" : 1.1.1 Adapter "rpi2" : 1.3.1 Adapter "s7" : 1.3.6 Adapter "sainlogic" : 0.7.2 Adapter "samsung" : 0.2.9 , installed 0.2.9 Adapter "sanext" : 0.0.5 Adapter "sayit" : 1.12.3 Adapter "sbfspot" : 4.0.5 Adapter "scenes" : 2.3.6 Adapter "schoolfree" : 1.0.0 Adapter "schwoerer-ventcube": 1.4.2 Adapter "seq" : 0.2.10 Adapter "shelly" : 4.0.7 Adapter "shuttercontrol": 1.2.0 Adapter "sia" : 1.0.4 Adapter "siegenia" : 1.1.1 Adapter "simple-api" : 2.6.1 , installed 2.6.1 Adapter "smappee" : 0.2.5 Adapter "smartcontrol" : 1.2.1 Adapter "smartgarden" : 1.0.5 Adapter "smartmeter" : 3.2.1 Adapter "snips" : 1.5.1 Adapter "snmp" : 0.5.0 Adapter "socketio" : 3.1.4 , installed 3.1.4 Adapter "solarlog" : 2.1.3 Adapter "solarviewdatareader": 1.0.2 Adapter "solarwetter" : 1.0.0 Adapter "sonnen" : 1.9.4 Adapter "sonoff" : 2.4.5 Adapter "sonos" : 2.1.1 , installed 2.1.1 Adapter "sony-bravia" : 1.0.1 Adapter "spotify-premium": 1.0.0 Adapter "sprinklecontrol": 0.1.7 Adapter "sql" : 1.15.7 Adapter "squeezebox" : 1.0.0 Adapter "squeezeboxrpc" : 1.3.4 Adapter "starline" : 1.1.3 Adapter "statistics" : 1.0.9 Adapter "stiebel-isg" : 1.7.3 Adapter "sunnyportal" : 0.1.5 Adapter "swiss-weather-api": 0.9.7 Adapter "synology" : 1.0.0 , installed 1.0.0 Adapter "systeminfo" : 0.3.1 Adapter "tado" : 0.3.4 Adapter "tahoma" : 0.4.3 Adapter "tankerkoenig" : 2.1.1 Adapter "telegram" : 1.10.0 , installed 1.10.0 Adapter "terminal" : 0.1.2 Adapter "tesla-motors" : 0.5.2 Adapter "text2command" : 2.1.1 Adapter "tinker" : 1.1.0 Adapter "tr-064" : 4.2.14 , installed 4.2.14 Adapter "traccar" : 0.0.9 Adapter "tradfri" : 2.7.4 Adapter "trashschedule" : 1.2.0 Adapter "trivum" : 0.0.4 Adapter "tunnelbroker-endpoint-updater": 0.0.1 Adapter "tuya" : 3.6.5 Adapter "tvprogram" : 1.1.0 Adapter "tvspielfilm" : 1.0.4 Adapter "unifi" : 0.5.10 Adapter "upnp" : 1.0.19 Adapter "vaillant" : 0.0.13 Adapter "valloxmv" : 1.1.3 Adapter "vcard" : 0.0.9 Adapter "velux" : 0.0.7 Adapter "viessmann" : 1.3.4 , installed 1.3.4 Adapter "virtualpowermeter": 1.4.2 Adapter "vis" : 1.4.3 , installed 1.4.3 Adapter "vis-bars" : 0.1.4 Adapter "vis-canvas-gauges": 0.1.5 Adapter "vis-colorpicker": 1.2.0 Adapter "vis-fancyswitch": 1.1.0 Adapter "vis-google-fonts": 0.1.0 Adapter "vis-history" : 1.0.0 Adapter "vis-hqwidgets" : 1.1.7 Adapter "vis-icontwo" : 0.77.0 Adapter "vis-inventwo" : 3.0.11 Adapter "vis-jqui-mfd" : 1.0.12 Adapter "vis-justgage" : 1.0.2 Adapter "vis-keyboard" : 0.0.2 Adapter "vis-lcars" : 1.0.4 Adapter "vis-map" : 1.0.4 Adapter "vis-material-advanced": 1.7.0 Adapter "vis-metro" : 1.1.2 Adapter "vis-players" : 0.1.6 Adapter "vis-plumb" : 1.0.2 Adapter "vis-rgraph" : 0.0.2 Adapter "vis-timeandweather": 1.1.7 Adapter "vis-weather" : 2.5.3 Adapter "volumio" : 0.1.2 Adapter "volvo" : 0.0.4 Adapter "vr200" : 1.0.0 Adapter "vw-connect" : 0.0.39 Adapter "weatherflow_udp": 0.1.1 Adapter "weatherunderground": 3.3.1 Adapter "web" : 3.4.7 , installed 3.4.7 Adapter "weishaupt-wem" : 0.0.9 Adapter "whatsapp-cmb" : 0.1.6 , installed 0.1.6 Adapter "wiffi-wz" : 2.2.0 Adapter "wifilight" : 1.1.0 Adapter "windows-control": 0.1.5 Adapter "wled" : 0.5.6 Adapter "wm-bus" : 0.1.12 Adapter "wolf" : 1.2.1 Adapter "wolf-smartset" : 1.0.0 Adapter "worx" : 1.4.3 Adapter "xbox" : 0.7.7 Adapter "xs1" : 1.0.2 Adapter "yahka" : 0.12.0 Adapter "yamaha" : 0.4.0 Adapter "yeelight-2" : 1.0.3 Adapter "youtube" : 1.1.1 Adapter "yr" : 3.0.5 Adapter "zigbee" : 1.5.6 Adapter "zont" : 0.5.3 Adapter "zwave2" : 1.10.2 pi@raspberrypi:~ $ iobroker upgrade self Update js-controller from @2.2.10 to @3.3.15 NPM version: 6.14.14 npm install iobroker.js-controller@3.3.15 --loglevel error --unsafe-perm --prefix "/opt/iobroker" (System call) ACHTUNG: Die Fehlerberichterstattung über Sentry wird beim nächsten Start von ioBroker aktiviert Wir von ioBroker wollen das stabilste Smart-Home-System bereitstellen. Um dies zu ermöglichen, haben wir uns entschlossen, eine automatische Fehler- und Crash-Reporting-Lösung in den js-Controller und auch in Adapter zu implementieren. DIESE BERICHTERSTATTUNG WIRD MIT DEM NÄCHSTEN START IHRES IOBROKERS AKTIVIERT! Bei Fehlern, die zum Absturz des js-Controllers oder eines der relevanten Adapter führen, werden die Fehlerdetails an einen Server gesendet. Für den js-controller und die Haupt-Adapter befindet sich dieser Server in Deutschland. Informationen zu Community-Adaptern sind in der Github-Readme-Datei des betroffenen Adapters zu finden. Dort steht welcher Sentry-Server verwendet wird. Die Fehlerberichterstattung kann, falls gewünscht, über den Befehl 'iobroker plugin disable sentry' deaktiviert werden. Dieser Befehl stellt auch sicher, dass kein Adapter, der auf diesem Host ausgeführt wird, Absturzberichtsdaten an den Sentry-Server sendet. ╭─────────────────────────────────────────────────────────╮ │ │ │ Manual installation of ioBroker is no longer supported │ │ on Linux, OSX and FreeBSD! │ │ Please refer to the documentation on how to install it! │ │ https://github.com/ioBroker/ioBroker/wiki/Installation │ │ │ ╰─────────────────────────────────────────────────────────╯ npm ERR! code ELIFECYCLE npm ERR! errno 100 npm ERR! iobroker@2.0.3 postinstall: `node lib/install.js` npm ERR! Exit status 100 npm ERR! npm ERR! Failed at the iobroker@2.0.3 postinstall script. npm ERR! This is probably not a problem with npm. There is likely additional logging output above. npm ERR! A complete log of this run can be found in: npm ERR! /home/iobroker/.npm/_logs/2021-08-19T15_22_55_970Z-debug.log host.raspberrypi Cannot install iobroker.js-controller@3.3.15: 100
