CC2531 wird nicht erkannt RPI2?
-
Hi
als temporäre Einstiegslösung wollte ich einen CC2531 am RPI2 nutzen.
Leider wird er für mein Verständnis nicht gefunden.Der Zigbee Adapter (1.5.6 und 1.6.3) startet nicht:
zigbee.0 2021-10-12 17:16:41.953 error Error herdsman start zigbee.0 2021-10-12 17:16:41.951 error Failed to start Zigbee zigbee.0 2021-10-12 17:16:41.948 error Starting zigbee-herdsman problem : "No path provided and failed to auto detect path"Der Versuch die mit:
ls -l /dev/serial/by-idendet im Fehler:
pi@raspberrypi:~ $ ls -l /dev/serial/by-id ls: Zugriff auf '/dev/serial/by-id' nicht möglich: Datei oder Verzeichnis nicht gefundenAlso wollte ich im Bootvorgang nachsehen ob dort bei den USBs ein Texas Instruments Chip gefunden wird, was leider auch nicht der Fall ist:
[ 0.000000] Booting Linux on physical CPU 0xf00 [ 0.000000] Linux version 5.10.63-v7+ (dom@buildbot) (arm-linux-gnueabihf-gcc -8 (Ubuntu/Linaro 8.4.0-3ubuntu1) 8.4.0, GNU ld (GNU Binutils for Ubuntu) 2.34) #1457 SMP Tue Sep 28 11:25:31 BST 2021 [ 0.000000] CPU: ARMv7 Processor [410fc075] revision 5 (ARMv7), cr=10c5387d [ 0.000000] CPU: div instructions available: patching division code [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instructio n cache [ 0.000000] OF: fdt: Machine model: Raspberry Pi 2 Model B Rev 1.1 [ 0.000000] random: fast init done [ 0.000000] Memory policy: Data cache writealloc [ 0.000000] Reserved memory: created CMA memory pool at 0x37400000, size 64 M iB [ 0.000000] OF: reserved mem: initialized node linux,cma, compatible id share d-dma-pool [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x0000000000000000-0x000000003b3fffff] [ 0.000000] Normal empty [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000000000000-0x000000003b3fffff] [ 0.000000] Initmem setup node 0 [mem 0x0000000000000000-0x000000003b3fffff] [ 0.000000] On node 0 totalpages: 242688 [ 0.000000] DMA zone: 2133 pages used for memmap [ 0.000000] DMA zone: 0 pages reserved [ 0.000000] DMA zone: 242688 pages, LIFO batch:63 [ 0.000000] percpu: Embedded 20 pages/cpu s50828 r8192 d22900 u81920 [ 0.000000] pcpu-alloc: s50828 r8192 d22900 u81920 alloc=20*4096 [ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 240555 [ 0.000000] Kernel command line: coherent_pool=1M snd_bcm2835.enable_compat_a lsa=0 snd_bcm2835.enable_hdmi=1 bcm2708_fb.fbwidth=656 bcm2708_fb.fbheight=416 b cm2708_fb.fbswap=1 vc_mem.mem_base=0x3ec00000 vc_mem.mem_size=0x40000000 consol e=ttyAMA0,115200 console=tty1 root=PARTUUID=a560571a-02 rootfstype=ext4 elevator =deadline fsck.repair=yes rootwait quiet splash plymouth.ignore-serial-consoles [ 0.000000] Kernel parameter elevator= does not have any effect anymore. Please use sysfs to set IO scheduler for individual devices. [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes, linear) [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes, li near) [ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off [ 0.000000] Memory: 878812K/970752K available (10240K kernel code, 1312K rwda ta, 2948K rodata, 1024K init, 863K bss, 26404K reserved, 65536K cma-reserved) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [ 0.000000] ftrace: allocating 32055 entries in 63 pages [ 0.000000] ftrace: allocated 63 pages with 6 groups [ 0.000000] rcu: Hierarchical RCU implementation. [ 0.000000] Rude variant of Tasks RCU enabled. [ 0.000000] Tracing variant of Tasks RCU enabled. [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 10 jif fies. [ 0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16 [ 0.000000] random: get_random_bytes called from start_kernel+0x3ac/0x580 wit h crng_init=1 [ 0.000000] arch_timer: cp15 timer(s) running at 19.20MHz (phys). [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x46d987e47, max_idle_ns: 440795202767 ns [ 0.000011] sched_clock: 56 bits at 19MHz, resolution 52ns, wraps every 43980 46511078ns [ 0.000029] Switching to timer-based delay loop, resolution 52ns [ 0.000383] Console: colour dummy device 80x30 [ 0.000483] printk: console [tty1] enabled [ 0.000552] Calibrating delay loop (skipped), value calculated using timer fr equency.. 38.40 BogoMIPS (lpj=192000) [ 0.000591] pid_max: default: 32768 minimum: 301 [ 0.000868] LSM: Security Framework initializing [ 0.001169] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes, linea r) [ 0.001206] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes, linear) [ 0.003085] cgroup: Disabling memory control group subsystem [ 0.003468] CPU: Testing write buffer coherency: ok [ 0.004186] CPU0: update cpu_capacity 1024 [ 0.004210] CPU0: thread -1, cpu 0, socket 15, mpidr 80000f00 [ 0.006005] Setting up static identity map for 0x100000 - 0x10003c [ 0.006276] rcu: Hierarchical SRCU implementation. [ 0.007560] smp: Bringing up secondary CPUs ... [ 0.009218] CPU1: update cpu_capacity 1024 [ 0.009231] CPU1: thread -1, cpu 1, socket 15, mpidr 80000f01 [ 0.011244] CPU2: update cpu_capacity 1024 [ 0.011258] CPU2: thread -1, cpu 2, socket 15, mpidr 80000f02 [ 0.013005] CPU3: update cpu_capacity 1024 [ 0.013018] CPU3: thread -1, cpu 3, socket 15, mpidr 80000f03 [ 0.013252] smp: Brought up 1 node, 4 CPUs [ 0.013282] SMP: Total of 4 processors activated (153.60 BogoMIPS). [ 0.013297] CPU: All CPU(s) started in HYP mode. [ 0.013311] CPU: Virtualization extensions available. [ 0.014664] devtmpfs: initialized [ 0.036354] VFP support v0.3: implementor 41 architecture 2 part 30 variant 7 rev 5 [ 0.036725] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, ma x_idle_ns: 19112604462750000 ns [ 0.036768] futex hash table entries: 1024 (order: 4, 65536 bytes, linear) [ 0.041015] pinctrl core: initialized pinctrl subsystem [ 0.042723] NET: Registered protocol family 16 [ 0.047940] DMA: preallocated 1024 KiB pool for atomic coherent allocations [ 0.055284] audit: initializing netlink subsys (disabled) [ 0.055776] audit: type=2000 audit(0.050:1): state=initialized audit_enabled= 0 res=1 [ 0.056659] thermal_sys: Registered thermal governor 'step_wise' [ 0.057926] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers. [ 0.057949] hw-breakpoint: maximum watchpoint size is 8 bytes. [ 0.058353] Serial: AMBA PL011 UART driver [ 0.079433] bcm2835-mbox 3f00b880.mailbox: mailbox enabled [ 0.100322] raspberrypi-firmware soc:firmware: Attached to firmware from 2021 -09-28T11:32:50, variant start [ 0.110336] raspberrypi-firmware soc:firmware: Firmware hash is 778b6a4f3c7d8 d48bb63c02c47bcfbac79417bea [ 0.164855] Kprobes globally optimized [ 0.172451] bcm2835-dma 3f007000.dma: DMA legacy API manager, dmachans=0x1 [ 0.175374] SCSI subsystem initialized [ 0.175747] usbcore: registered new interface driver usbfs [ 0.175839] usbcore: registered new interface driver hub [ 0.175940] usbcore: registered new device driver usb [ 0.178648] clocksource: Switched to clocksource arch_sys_counter [ 1.923347] VFS: Disk quotas dquot_6.6.0 [ 1.923506] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 1.923781] FS-Cache: Loaded [ 1.924239] CacheFiles: Loaded [ 1.940969] NET: Registered protocol family 2 [ 1.941325] IP idents hash table entries: 16384 (order: 5, 131072 bytes, line ar) [ 1.943420] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 6144 bytes, linear) [ 1.943506] TCP established hash table entries: 8192 (order: 3, 32768 bytes, linear) [ 1.943785] TCP bind hash table entries: 8192 (order: 4, 65536 bytes, linear) [ 1.943984] TCP: Hash tables configured (established 8192 bind 8192) [ 1.944241] UDP hash table entries: 512 (order: 2, 16384 bytes, linear) [ 1.944322] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes, linear) [ 1.945294] NET: Registered protocol family 1 [ 1.946538] RPC: Registered named UNIX socket transport module. [ 1.946560] RPC: Registered udp transport module. [ 1.946575] RPC: Registered tcp transport module. [ 1.946590] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 1.948854] hw perfevents: enabled with armv7_cortex_a7 PMU driver, 5 counter s available [ 1.954140] Initialise system trusted keyrings [ 1.954676] workingset: timestamp_bits=14 max_order=18 bucket_order=4 [ 1.966829] zbud: loaded [ 1.969656] FS-Cache: Netfs 'nfs' registered for caching [ 1.970877] NFS: Registering the id_resolver key type [ 1.970957] Key type id_resolver registered [ 1.970974] Key type id_legacy registered [ 1.971175] nfs4filelayout_init: NFSv4 File Layout Driver Registering... [ 1.971194] nfs4flexfilelayout_init: NFSv4 Flexfile Layout Driver Registering ... [ 1.972812] Key type asymmetric registered [ 1.972834] Asymmetric key parser 'x509' registered [ 1.972935] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 2 49) [ 1.972955] io scheduler mq-deadline registered [ 1.972972] io scheduler kyber registered [ 1.976444] bcm2708_fb soc:fb: FB found 1 display(s) [ 1.985044] Console: switching to colour frame buffer device 82x26 [ 1.990665] bcm2708_fb soc:fb: Registered framebuffer for display 0, size 656 x416 [ 1.997420] bcm2835-rng 3f104000.rng: hwrng registered [ 1.997938] vc-mem: phys_addr:0x00000000 mem_base=0x3ec00000 mem_size:0x40000 000(1024 MiB) [ 1.999127] gpiomem-bcm2835 3f200000.gpiomem: Initialised: Registers at 0x3f2 00000 [ 2.016908] brd: module loaded [ 2.034206] loop: module loaded [ 2.036626] Loading iSCSI transport class v2.0-870. [ 2.039042] libphy: Fixed MDIO Bus: probed [ 2.039457] usbcore: registered new interface driver lan78xx [ 2.039550] usbcore: registered new interface driver smsc95xx [ 2.039584] dwc_otg: version 3.00a 10-AUG-2012 (platform bus) [ 2.768112] Core Release: 2.80a [ 2.768137] Setting default values for core params [ 2.768182] Finished setting default values for core params [ 2.968746] Using Buffer DMA mode [ 2.968764] Periodic Transfer Interrupt Enhancement - disabled [ 2.968779] Multiprocessor Interrupt Enhancement - disabled [ 2.968799] OTG VER PARAM: 0, OTG VER FLAG: 0 [ 2.968877] Dedicated Tx FIFOs mode [ 2.969656] WARN::dwc_otg_hcd_init:1074: FIQ DMA bounce buffers: virt = b7514 000 dma = 0xf7514000 len=9024 [ 2.969701] FIQ FSM acceleration enabled for : Non-periodic Split Transactions Periodic Split Transactions High-Speed Isochronous Endpoints Interrupt/Control Split Transaction hack enabled [ 2.969720] dwc_otg: Microframe scheduler enabled [ 2.969825] WARN::hcd_init_fiq:457: FIQ on core 1 [ 2.969846] WARN::hcd_init_fiq:458: FIQ ASM at 807c9978 length 36 [ 2.969869] WARN::hcd_init_fiq:497: MPHI regs_base at bb810000 [ 2.969901] dwc_otg 3f980000.usb: DWC OTG Controller [ 2.969956] dwc_otg 3f980000.usb: new USB bus registered, assigned bus number 1 [ 2.970046] dwc_otg 3f980000.usb: irq 89, io mem 0x00000000 [ 2.970108] Init: Port Power? op_state=1 [ 2.970123] Init: Power Port (0) [ 2.970635] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bc dDevice= 5.10 [ 2.970660] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber= 1 [ 2.970679] usb usb1: Product: DWC OTG Controller [ 2.970698] usb usb1: Manufacturer: Linux 5.10.63-v7+ dwc_otg_hcd [ 2.970716] usb usb1: SerialNumber: 3f980000.usb [ 2.971856] hub 1-0:1.0: USB hub found [ 2.971955] hub 1-0:1.0: 1 port detected [ 2.973681] dwc_otg: FIQ enabled [ 2.973703] dwc_otg: NAK holdoff enabled [ 2.973718] dwc_otg: FIQ split-transaction FSM enabled [ 2.973741] Module dwc_common_port init [ 2.974221] usbcore: registered new interface driver usb-storage [ 2.974639] mousedev: PS/2 mouse device common for all mice [ 2.976181] bcm2835-wdt bcm2835-wdt: Broadcom BCM2835 watchdog timer [ 2.979222] sdhci: Secure Digital Host Controller Interface driver [ 2.979241] sdhci: Copyright(c) Pierre Ossman [ 2.980089] sdhost-bcm2835 3f202000.mmc: could not get clk, deferring probe [ 2.980457] sdhci-pltfm: SDHCI platform and OF driver helper [ 2.981672] ledtrig-cpu: registered to indicate activity on CPUs [ 2.982149] hid: raw HID events driver (C) Jiri Kosina [ 2.982380] usbcore: registered new interface driver usbhid [ 2.982396] usbhid: USB HID core driver [ 2.989366] Initializing XFRM netlink socket [ 2.989432] NET: Registered protocol family 17 [ 2.989656] Key type dns_resolver registered [ 2.990429] Registering SWP/SWPB emulation handler [ 2.990671] registered taskstats version 1 [ 2.990714] Loading compiled-in X.509 certificates [ 2.991938] Key type ._fscrypt registered [ 2.991962] Key type .fscrypt registered [ 2.991978] Key type fscrypt-provisioning registered [ 3.007452] uart-pl011 3f201000.serial: cts_event_workaround enabled [ 3.007601] 3f201000.serial: ttyAMA0 at MMIO 0x3f201000 (irq = 114, base_baud = 0) is a PL011 rev2 [ 3.007964] printk: console [ttyAMA0] enabled [ 3.011227] bcm2835-power bcm2835-power: Broadcom BCM2835 power domains drive r [ 3.014329] sdhost: log_buf @ (ptrval) (f7513000) [ 3.062092] mmc0: sdhost-bcm2835 loaded - DMA enabled (>1) [ 3.066149] of_cfs_init [ 3.066581] of_cfs_init: OK [ 3.068067] Waiting for root device PARTUUID=a560571a-02... [ 3.098892] Indeed it is in host mode hprt0 = 00021501 [ 3.195766] mmc0: host does not support reading read-only switch, assuming wr ite-enable [ 3.199237] mmc0: new high speed SDHC card at address aaaa [ 3.200637] mmcblk0: mmc0:aaaa SE16G 14.8 GiB [ 3.203745] mmcblk0: p1 p2 [ 3.222402] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. O pts: (null) [ 3.222538] VFS: Mounted root (ext4 filesystem) readonly on device 179:2. [ 3.223518] devtmpfs: mounted [ 3.231847] Freeing unused kernel memory: 1024K [ 3.299148] Run /sbin/init as init process [ 3.299165] with arguments: [ 3.299180] /sbin/init [ 3.299194] splash [ 3.299207] with environment: [ 3.299220] HOME=/ [ 3.299234] TERM=linux [ 3.318725] usb 1-1: new high-speed USB device number 2 using dwc_otg [ 3.318962] Indeed it is in host mode hprt0 = 00001101 [ 3.559262] usb 1-1: New USB device found, idVendor=0424, idProduct=9514, bcd Device= 2.00 [ 3.559298] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 3.560515] hub 1-1:1.0: USB hub found [ 3.560692] hub 1-1:1.0: 5 ports detected [ 3.878780] usb 1-1.1: new high-speed USB device number 3 using dwc_otg [ 3.927610] systemd[1]: System time before build time, advancing clock. [ 4.009217] usb 1-1.1: New USB device found, idVendor=0424, idProduct=ec00, b cdDevice= 2.00 [ 4.009253] usb 1-1.1: New USB device strings: Mfr=0, Product=0, SerialNumber =0 [ 4.012521] smsc95xx v2.0.0 [ 4.082929] NET: Registered protocol family 10 [ 4.085266] Segment Routing with IPv6 [ 4.121913] libphy: smsc95xx-mdiobus: probed [ 4.123606] smsc95xx 1-1.1:1.0 eth0: register 'smsc95xx' at usb-3f980000.usb- 1.1, smsc95xx USB 2.0 Ethernet, b8:27:eb:c2:18:be [ 4.172276] systemd[1]: systemd 241 running in system mode. (+PAM +AUDIT +SEL INUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL + XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN2 +IDN -PCRE2 default-hierarchy=hybr id) [ 4.174038] systemd[1]: Detected architecture arm. [ 4.244297] systemd[1]: Set hostname to <raspberrypi>. [ 4.529293] uart-pl011 3f201000.serial: no DMA platform data [ 5.356340] random: systemd: uninitialized urandom read (16 bytes read) [ 5.381501] random: systemd: uninitialized urandom read (16 bytes read) [ 5.381675] systemd[1]: Reached target Swap. [ 5.382599] random: systemd: uninitialized urandom read (16 bytes read) [ 5.383127] systemd[1]: Started Forward Password Requests to Wall Directory W atch. [ 5.384361] systemd[1]: Listening on Syslog Socket. [ 5.385401] systemd[1]: Listening on fsck to fsckd communication Socket. [ 5.390433] systemd[1]: Created slice system-systemd\x2dfsck.slice. [ 5.391730] systemd[1]: Listening on Journal Socket (/dev/log). [ 5.393316] systemd[1]: Listening on Journal Audit Socket. [ 5.598498] i2c /dev entries driver [ 6.289112] EXT4-fs (mmcblk0p2): re-mounted. Opts: (null) [ 6.440186] systemd-journald[117]: Received request to flush runtime journal from PID 1 [ 7.331257] mc: Linux media interface: v0.10 [ 7.331892] vc_sm_cma: module is from the staging directory, the quality is u nknown, you have been warned. [ 7.334783] bcm2835_vc_sm_cma_probe: Videocore shared memory driver [ 7.334828] [vc_sm_connected_init]: start [ 7.342538] [vc_sm_connected_init]: installed successfully [ 7.419399] videodev: Linux video capture interface: v2.00 [ 7.472664] snd_bcm2835: module is from the staging directory, the quality is unknown, you have been warned. [ 7.489931] bcm2835_audio bcm2835_audio: card created with 8 channels [ 7.493504] bcm2835_mmal_vchiq: module is from the staging directory, the qua lity is unknown, you have been warned. [ 7.505584] bcm2835_v4l2: module is from the staging directory, the quality i s unknown, you have been warned. [ 7.511182] bcm2835_mmal_vchiq: module is from the staging directory, the qua lity is unknown, you have been warned. [ 7.598517] bcm2835_isp: module is from the staging directory, the quality is unknown, you have been warned. [ 7.621976] bcm2835_codec: module is from the staging directory, the quality is unknown, you have been warned. [ 7.635849] bcm2835-isp bcm2835-isp: Device node output[0] registered as /dev /video13 [ 7.637649] bcm2835-isp bcm2835-isp: Device node capture[0] registered as /de v/video14 [ 7.639017] bcm2835-isp bcm2835-isp: Device node capture[1] registered as /de v/video15 [ 7.640535] bcm2835-isp bcm2835-isp: Device node stats[2] registered as /dev/ video16 [ 7.640595] bcm2835-isp bcm2835-isp: Register output node 0 with media contro ller [ 7.640634] bcm2835-isp bcm2835-isp: Register capture node 1 with media contr oller [ 7.640664] bcm2835-isp bcm2835-isp: Register capture node 2 with media contr oller [ 7.640692] bcm2835-isp bcm2835-isp: Register capture node 3 with media contr oller [ 7.641166] bcm2835-isp bcm2835-isp: Loaded V4L2 bcm2835-isp [ 7.643961] bcm2835-codec bcm2835-codec: Device registered as /dev/video10 [ 7.644071] bcm2835-codec bcm2835-codec: Loaded V4L2 decode [ 7.652032] bcm2835-codec bcm2835-codec: Device registered as /dev/video11 [ 7.652130] bcm2835-codec bcm2835-codec: Loaded V4L2 encode [ 7.657197] bcm2835-codec bcm2835-codec: Device registered as /dev/video12 [ 7.657290] bcm2835-codec bcm2835-codec: Loaded V4L2 isp [ 7.662855] bcm2835-codec bcm2835-codec: Device registered as /dev/video18 [ 7.662958] bcm2835-codec bcm2835-codec: Loaded V4L2 image_fx [ 11.390707] random: crng init done [ 11.390772] random: 7 urandom warning(s) missed due to ratelimiting [ 11.897343] 8021q: 802.1Q VLAN Support v1.8 [ 12.111589] cfg80211: Loading compiled-in X.509 certificates for regulatory d atabase [ 12.273254] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7' [ 12.298833] Adding 102396k swap on /var/swap. Priority:-2 extents:1 across:1 02396k SSFS [ 12.673184] SMSC LAN8700 usb-001:003:01: attached PHY driver [SMSC LAN8700] ( mii_bus:phy_addr=usb-001:003:01, irq=POLL) [ 12.673800] smsc95xx 1-1.1:1.0 eth0: hardware isn't capable of remote wakeup [ 12.689947] smsc95xx 1-1.1:1.0 eth0: Link is Down [ 17.919966] smsc95xx 1-1.1:1.0 eth0: Link is Up - 100Mbps/Full - flow control off [ 17.920035] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready [ 19.205378] ICMPv6: process `dhcpcd' is using deprecated sysctl (syscall) net .ipv6.neigh.eth0.retrans_time - use net.ipv6.neigh.eth0.retrans_time_ms insteadDer CC2531 blinkt mit der roten LED in ca. 1 Sekunden Abständen und soll fertig geflasht sein. Stimmt definitiv etwas mit dem Stick nicht oder kann ich noch etwas versuchen? Den RPI bzw. IObroker habe ich bereits 2 mal neu aufgesetzt.
Thx vorab!
-
@pete0815
Offensichtlich wird in der Version die du drauf hast keine serielle Schnittstelle unter /serial/by-Id angelegt. Bitte prüfen:lsusb ob der Stick überhaupt erkannt wurde
ls /dev/ttyA* um zu sehen ob unter /dev/ttzACMx oder /dev/tryAMAx ein port angelegt wurde.A.
-
Danke!
@asgothian said in CC2531 wird nicht erkannt RPI2?:lsusb
pi@raspberrypi:~ $ lsusb Bus 001 Device 003: ID 0424:ec00 Standard Microsystems Corp. SMSC9512/9514 Fast Ethernet Adapter Bus 001 Device 002: ID 0424:9514 Standard Microsystems Corp. SMC9514 Hub Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hubNichts gefunden.
pi@raspberrypi:~ $ ls /dev/ttyA* /dev/ttyAMA0Ist das die interne serielle Schnittstelle auf den GPIOs?
-
@pete0815 weiß ich nicht. Der Stick taucht am usb garnicht auf. Deswegen gibt es auch keine serielle Schnittstelle.
A.
-
@asgothian
Thx, also der Stick das Problem.Teste nochmal ein anderes USB Device um zu gucken ob der USB Hub ok ist, aber gehe vom Stick aus.
edit: ja, ob der Stick drinsteckt oder nicht lsusb wirft die gleiche Geräte raus. Somit der Stick nicht ok.
