Nach Update auf BACKITUP 2.2.3 startet iobroker nicht menr
-
Hallo,
Habe eben vor dem schlafen gehen noch die neue Version im Adapter Reiter BACKITUP updaten wollen von 2.2.2. Auf 2.2.3.Danach startet mein geliebtes iobroker nicht mehr:
Ich möchte an dem System nicht halbwissen rumdoktern und rumprobieren, daher lasse ich es jetzt mal aus und hoffe auf einen heißen Tip von euch. Danke.
e6iob@NUCioBroker:~$ iobroker [sudo] Passwort für e6iob: internal/modules/cjs/loader.js:905 throw err; ^ Error: Cannot find module '/opt/iobroker/node_modules/iobroker.js-controller/iobroker.js' at Function.Module._resolveFilename (internal/modules/cjs/loader.js:902:15) at Function.Module._load (internal/modules/cjs/loader.js:746:27) at Function.executeUserEntryPoint [as runMain] (internal/modules/run_main.js:76:12) at internal/main/run_main_module.js:17:47 { code: 'MODULE_NOT_FOUND', requireStack: [] } e6iob@NUCioBroker:~$Hier was passiert ist beim Backup, Exit 1:
$ iobroker upgrade backitup@2.2.3 Update backitup from @2.2.2 to @2.2.3 host.NUCioBroker Adapter "system.adapter.backitup.0" is stopped. NPM version: 6.14.15 npm install iobroker.backitup@2.2.3 --loglevel error --prefix "/opt/iobroker" (System call) ../authenticate_pam.cc: In function ‘void after_doing_auth(uv_work_t*, int)’:../authenticate_pam.cc:107:87: warning: ‘v8::Local<v8::Value> Nan::MakeCallback(v8::Local<v8::Object>, v8::Local<v8::Function>, int, v8::Local<v8::Value>*)’ is deprecated [-Wdeprecated-declarations] 107 | Nan::MakeCallback(Nan::GetCurrentContext()->Global(), Nan::New(m->callback), 1, args); | ^In file included from ../authenticate_pam.cc:23:../../nan/nan.h:1028:46: note: declared here 1028 | NAN_DEPRECATED inline v8::Local<v8::Value> MakeCallback( | ^~~~~~~~~~~~In file included from ../../nan/nan.h:58, from ../authenticate_pam.cc:23:../authenticate_pam.cc: At global scope:/home/iobroker/.cache/node-gyp/14.18.3/include/node/node.h:787:7: warning: cast between incompatible function types from ‘void (*)(v8::Local<v8::Object>)’ to ‘node::addon_register_func’ {aka ‘void (*)(v8::Local<v8::Object>, v8::Local<v8::Value>, void*)’} [-Wcast-function-type] 787 | (node::addon_register_func) (regfunc), \ | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~/home/iobroker/.cache/node-gyp/14.18.3/include/node/node.h:821:3: note: in expansion of macro ‘NODE_MODULE_X’ 821 | NODE_MODULE_X(modname, regfunc, NULL, 0) // NOLINT (readability/null_usage) | ^~~~~~~~~~~~~../authenticate_pam.cc:188:1: note: in expansion of macro ‘NODE_MODULE’ 188 | NODE_MODULE(authenticate_pam, init); | ^~~~~~~~~~~ node-pre-gyp ERR! install response status 404 Not Found on https://github.com/kelektiv/node.bcrypt.js/releases/download/v3.0.6/bcrypt_lib-v3.0.6-node-v83-linux-x64-glibc.tar.gz In file included from ../src/bcrypt_node.cc:1:../node_modules/nan/nan.h: In function ‘void Nan::AsyncQueueWorker(Nan::AsyncWorker*)’: ../node_modules/nan/nan.h:2232:7: warning: cast between incompatible function types from ‘void (*)(uv_work_t*)’ {aka ‘void (*)(uv_work_s*)’} to ‘uv_after_work_cb’ {aka ‘void (*)(uv_work_s*, int)’} [-Wcast-function-type] 2232 | , reinterpret_cast<uv_after_work_cb>(AsyncExecuteComplete) | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ In file included from ../node_modules/nan/nan.h:53, from ../src/bcrypt_node.cc:1:../src/bcrypt_node.cc: At global scope:/home/iobroker/.cache/node-gyp/14.18.3/include/node/node.h:787:7: warning: cast between incompatible function types from ‘void (*)(Nan::ADDON_REGISTER_FUNCTION_ARGS_TYPE)’ {aka ‘void (*)(v8::Local<v8::Object>)’} to ‘node::addon_register_func’ {aka ‘void (*)(v8::Local<v8::Object>, v8::Local<v8::Value>, void*)’} [-Wcast-function-type] 787 | (node::addon_register_func) (regfunc), \ | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~/home/iobroker/.cache/node-gyp/14.18.3/include/node/node.h:821:3: note: in expansion of macro ‘NODE_MODULE_X’ 821 | NODE_MODULE_X(modname, regfunc, NULL, 0) // NOLINT (readability/null_usage) | ^~~~~~~~~~~~~../src/bcrypt_node.cc:378:1: note: in expansion of macro ‘NODE_MODULE’ 378 | NODE_MODULE(bcrypt_lib, init); | ^~~~~~~~~~~ In file included from ../src/bcrypt_node.cc:1: ../../nan/nan.h: In function ‘void Nan::AsyncQueueWorker(Nan::AsyncWorker*)’:../../nan/nan.h:2298:7: warning: cast between incompatible function types from ‘void (*)(uv_work_t*)’ {aka ‘void (*)(uv_work_s*)’} to ‘uv_after_work_cb’ {aka ‘void (*)(uv_work_s*, int)’} [-Wcast-function-type] 2298 | , reinterpret_cast<uv_after_work_cb>(AsyncExecuteComplete) | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ In file included from ../../nan/nan.h:54, from ../src/bcrypt_node.cc:1:../src/bcrypt_node.cc: At global scope:/home/iobroker/.cache/node-gyp/14.18.3/include/node/node.h:787:7: warning: cast between incompatible function types from ‘void (*)(Nan::ADDON_REGISTER_FUNCTION_ARGS_TYPE)’ {aka ‘void (*)(v8::Local<v8::Object>)’} to ‘node::addon_register_func’ {aka ‘void (*)(v8::Local<v8::Object>, v8::Local<v8::Value>, void*)’} [-Wcast-function-type] 787 | (node::addon_register_func) (regfunc), \ | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~/home/iobroker/.cache/node-gyp/14.18.3/include/node/node.h:821:3: note: in expansion of macro ‘NODE_MODULE_X’ 821 | NODE_MODULE_X(modname, regfunc, NULL, 0) // NOLINT (readability/null_usage) | ^~~~~~~~~~~~~../src/bcrypt_node.cc:359:1: note: in expansion of macro ‘NODE_MODULE’ 359 | NODE_MODULE(bcrypt_lib, init); | ^~~~~~~~~~~ ffmpeg version 4.3.1 Copyright (c) 2000-2020 the FFmpeg developers built with gcc 6.3.0 (Debian 6.3.0-18+deb9u1) 20170516 configuration: --pkgconfigdir=/build/workspace/lib/pkgconfig --prefix=/build/workspace --pkg-config-flags=--static --extra-cflags=-I/build/workspace/include --extra-ldflags=-L/build/workspace/lib --extra-libs='-lpthread -lm' --enable-static --disable-debug --disable-shared --disable-ffplay --disable-doc --enable-openssl --enable-gpl --enable-version3 --enable-nonfree --enable-pthreads --enable-libvpx --enable-libmp3lame --enable-libopus --enable-libtheora --enable-libvorbis --enable-libx264 --enable-runtime-cpudetect --enable-libfdk-aac --enable-avfilter --enable-libopencore_amrwb --enable-libopencore_amrnb --enable-filters --enable-decoder=h264 --enable-network --enable-protocol=tcp --enable-libspeex --enable-demuxer=rtsp --enable-indev=alsa --enable-outdev=alsa libavutil 56. 51.100 / 56. 51.100 libavcodec 58. 91.100 / 58. 91.100 libavformat 58. 45.100 / 58. 45.100 libavdevice 58. 10.100 / 58. 10.100 libavfilter 7. 85.100 / 7. 85.100 libswscale 5. 7.100 / 5. 7.100 libswresample 3. 7.100 / 3. 7.100 libpostproc 55. 7.100 / 55. 7.100 ../src/serialport.cpp: In function ‘Nan::NAN_METHOD_RETURN_TYPE Open(Nan::NAN_METHOD_ARGS_TYPE)’:../src/serialport.cpp:78:51: warning: cast between incompatible function types from ‘void (*)(uv_work_t*)’ {aka ‘void (*)(uv_work_s*)’} to ‘uv_after_work_cb’ {aka ‘void (*)(uv_work_s*, int)’} [-Wcast-function-type] 78 | uv_queue_work(uv_default_loop(), req, EIO_Open, (uv_after_work_cb)EIO_AfterOpen); | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ ../src/serialport.cpp: In function ‘Nan::NAN_METHOD_RETURN_TYPE Update(Nan::NAN_METHOD_ARGS_TYPE)’:../src/serialport.cpp:135:53: warning: cast between incompatible function types from ‘void (*)(uv_work_t*)’ {aka ‘void (*)(uv_work_s*)’} to ‘uv_after_work_cb’ {aka ‘void (*)(uv_work_s*, int)’} [-Wcast-function-type] 135 | uv_queue_work(uv_default_loop(), req, EIO_Update, (uv_after_work_cb)EIO_AfterUpdate); | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ ../src/serialport.cpp: In function ‘Nan::NAN_METHOD_RETURN_TYPE Close(Nan::NAN_METHOD_ARGS_TYPE)’: ../src/serialport.cpp:175:52: warning: cast between incompatible function types from ‘void (*)(uv_work_t*)’ {aka ‘void (*)(uv_work_s*)’} to ‘uv_after_work_cb’ {aka ‘void (*)(uv_work_s*, int)’} [-Wcast-function-type] 175 | uv_queue_work(uv_default_loop(), req, EIO_Close, (uv_after_work_cb)EIO_AfterClose); | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ ../src/serialport.cpp: In function ‘Nan::NAN_METHOD_RETURN_TYPE Flush(Nan::NAN_METHOD_ARGS_TYPE)’:../src/serialport.cpp:215:52: warning: cast between incompatible function types from ‘void (*)(uv_work_t*)’ {aka ‘void (*)(uv_work_s*)’} to ‘uv_after_work_cb’ {aka ‘void (*)(uv_work_s*, int)’} [-Wcast-function-type] 215 | uv_queue_work(uv_default_loop(), req, EIO_Flush, (uv_after_work_cb)EIO_AfterFlush); | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ ../src/serialport.cpp: In function ‘Nan::NAN_METHOD_RETURN_TYPE Set(Nan::NAN_METHOD_ARGS_TYPE)’:../src/serialport.cpp:271:50: warning: cast between incompatible function types from ‘void (*)(uv_work_t*)’ {aka ‘void (*)(uv_work_s*)’} to ‘uv_after_work_cb’ {aka ‘void (*)(uv_work_s*, int)’} [-Wcast-function-type] 271 | uv_queue_work(uv_default_loop(), req, EIO_Set, (uv_after_work_cb)EIO_AfterSet); | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ ../src/serialport.cpp: In function ‘Nan::NAN_METHOD_RETURN_TYPE Get(Nan::NAN_METHOD_ARGS_TYPE)’:../src/serialport.cpp:316:50: warning: cast between incompatible function types from ‘void (*)(uv_work_t*)’ {aka ‘void (*)(uv_work_s*)’} to ‘uv_after_work_cb’ {aka ‘void (*)(uv_work_s*, int)’} [-Wcast-function-type] 316 | uv_queue_work(uv_default_loop(), req, EIO_Get, (uv_after_work_cb)EIO_AfterGet); | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ ../src/serialport.cpp: In function ‘Nan::NAN_METHOD_RETURN_TYPE GetBaudRate(Nan::NAN_METHOD_ARGS_TYPE)’:../src/serialport.cpp:366:58: warning: cast between incompatible function types from ‘void (*)(uv_work_t*)’ {aka ‘void (*)(uv_work_s*)’} to ‘uv_after_work_cb’ {aka ‘void (*)(uv_work_s*, int)’} [-Wcast-function-type] 366 | uv_queue_work(uv_default_loop(), req, EIO_GetBaudRate, (uv_after_work_cb)EIO_AfterGetBaudRate); | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ ../src/serialport.cpp: In function ‘Nan::NAN_METHOD_RETURN_TYPE Drain(Nan::NAN_METHOD_ARGS_TYPE)’: ../src/serialport.cpp:412:52: warning: cast between incompatible function types from ‘void (*)(uv_work_t*)’ {aka ‘void (*)(uv_work_s*)’} to ‘uv_after_work_cb’ {aka ‘void (*)(uv_work_s*, int)’} [-Wcast-function-type] 412 | uv_queue_work(uv_default_loop(), req, EIO_Drain, (uv_after_work_cb)EIO_AfterDrain); | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ ../src/serialport.cpp: At global scope:../src/serialport.cpp:433:28: warning: unnecessary parentheses in declaration of ‘ToParityEnum’ [-Wparentheses] 433 | SerialPortParity NAN_INLINE(ToParityEnum(const v8::Local<v8::String>& v8str)) { | ^../src/serialport.cpp:452:30: warning: unnecessary parentheses in declaration of ‘ToStopBitEnum’ [-Wparentheses] 452 | SerialPortStopBits NAN_INLINE(ToStopBitEnum(double stopBits)) { | ^ In file included from ../../../nan/nan.h:58, from ../src/./serialport.h:13, from ../src/serialport.cpp:1:/home/iobroker/.cache/node-gyp/14.18.3/include/node/node.h:787:7: warning: cast between incompatible function types from ‘void (*)(Nan::ADDON_REGISTER_FUNCTION_ARGS_TYPE)’ {aka ‘void (*)(v8::Local<v8::Object>)’} to ‘node::addon_register_func’ {aka ‘void (*)(v8::Local<v8::Object>, v8::Local<v8::Value>, void*)’} [-Wcast-function-type] 787 | (node::addon_register_func) (regfunc), \ | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ /home/iobroker/.cache/node-gyp/14.18.3/include/node/node.h:821:3: note: in expansion of macro ‘NODE_MODULE_X’ 821 | NODE_MODULE_X(modname, regfunc, NULL, 0) // NOLINT (readability/null_usage) | ^~~~~~~~~~~~~../src/serialport.cpp:486:1: note: in expansion of macro ‘NODE_MODULE’ 486 | NODE_MODULE(serialport, init); | ^~~~~~~~~~~ ../src/serialport_unix.cpp: In function ‘int setup(int, OpenBaton*)’: ../src/serialport_unix.cpp:179:82: warning: ‘%s’ directive output may be truncated writing up to 1023 bytes into a region of size 1005 [-Wformat-truncation=] 179 | snprintf(data->errorString, sizeof(data->errorString), "Error %s Cannot open %s", strerror(errno), data->path); | ^~../src/serialport_unix.cpp:179:13: note: ‘snprintf’ output 20 or more bytes (assuming 1043) into a destination of size 1024 179 | snprintf(data->errorString, sizeof(data->errorString), "Error %s Cannot open %s", strerror(errno), data->path); | ~~~~~~~~^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ ../src/serialport_unix.cpp: In function ‘void EIO_Open(uv_work_t*)’: ../src/serialport_unix.cpp:89:84: warning: ‘%s’ directive output may be truncated writing up to 1023 bytes into a region of size 1003 [-Wformat-truncation=] 89 | snprintf(data->errorString, sizeof(data->errorString), "Error: %s, cannot open %s", strerror(errno), data->path); | ^~../src/serialport_unix.cpp:89:13: note: ‘snprintf’ output 22 or more bytes (assuming 1045) into a destination of size 1024 89 | snprintf(data->errorString, sizeof(data->errorString), "Error: %s, cannot open %s", strerror(errno), data->path); | ~~~~~~~~^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ ../src/serialport.cpp: In function ‘Nan::NAN_METHOD_RETURN_TYPE Open(Nan::NAN_METHOD_ARGS_TYPE)’:../src/serialport.cpp:78:51: warning: cast between incompatible function types from ‘void (*)(uv_work_t*)’ {aka ‘void (*)(uv_work_s*)’} to ‘uv_after_work_cb’ {aka ‘void (*)(uv_work_s*, int)’} [-Wcast-function-type] 78 | uv_queue_work(uv_default_loop(), req, EIO_Open, (uv_after_work_cb)EIO_AfterOpen); | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ ../src/serialport.cpp: In function ‘Nan::NAN_METHOD_RETURN_TYPE Update(Nan::NAN_METHOD_ARGS_TYPE)’:../src/serialport.cpp:135:53: warning: cast between incompatible function types from ‘void (*)(uv_work_t*)’ {aka ‘void (*)(uv_work_s*)’} to ‘uv_after_work_cb’ {aka ‘void (*)(uv_work_s*, int)’} [-Wcast-function-type] 135 | uv_queue_work(uv_default_loop(), req, EIO_Update, (uv_after_work_cb)EIO_AfterUpdate); | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ ../src/serialport.cpp: In function ‘Nan::NAN_METHOD_RETURN_TYPE Close(Nan::NAN_METHOD_ARGS_TYPE)’:../src/serialport.cpp:175:52: warning: cast between incompatible function types from ‘void (*)(uv_work_t*)’ {aka ‘void (*)(uv_work_s*)’} to ‘uv_after_work_cb’ {aka ‘void (*)(uv_work_s*, int)’} [-Wcast-function-type] 175 | uv_queue_work(uv_default_loop(), req, EIO_Close, (uv_after_work_cb)EIO_AfterClose); | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ ../src/serialport.cpp: In function ‘Nan::NAN_METHOD_RETURN_TYPE Flush(Nan::NAN_METHOD_ARGS_TYPE)’:../src/serialport.cpp:215:52: warning: cast between incompatible function types from ‘void (*)(uv_work_t*)’ {aka ‘void (*)(uv_work_s*)’} to ‘uv_after_work_cb’ {aka ‘void (*)(uv_work_s*, int)’} [-Wcast-function-type] 215 | uv_queue_work(uv_default_loop(), req, EIO_Flush, (uv_after_work_cb)EIO_AfterFlush); | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ ../src/serialport.cpp: In function ‘Nan::NAN_METHOD_RETURN_TYPE Set(Nan::NAN_METHOD_ARGS_TYPE)’:../src/serialport.cpp:271:50: warning: cast between incompatible function types from ‘void (*)(uv_work_t*)’ {aka ‘void (*)(uv_work_s*)’} to ‘uv_after_work_cb’ {aka ‘void (*)(uv_work_s*, int)’} [-Wcast-function-type] 271 | uv_queue_work(uv_default_loop(), req, EIO_Set, (uv_after_work_cb)EIO_AfterSet); | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ ../src/serialport.cpp: In function ‘Nan::NAN_METHOD_RETURN_TYPE Get(Nan::NAN_METHOD_ARGS_TYPE)’: ../src/serialport.cpp:316:50: warning: cast between incompatible function types from ‘void (*)(uv_work_t*)’ {aka ‘void (*)(uv_work_s*)’} to ‘uv_after_work_cb’ {aka ‘void (*)(uv_work_s*, int)’} [-Wcast-function-type] 316 | uv_queue_work(uv_default_loop(), req, EIO_Get, (uv_after_work_cb)EIO_AfterGet); | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ ../src/serialport.cpp: In function ‘Nan::NAN_METHOD_RETURN_TYPE GetBaudRate(Nan::NAN_METHOD_ARGS_TYPE)’: ../src/serialport.cpp:366:58: warning: cast between incompatible function types from ‘void (*)(uv_work_t*)’ {aka ‘void (*)(uv_work_s*)’} to ‘uv_after_work_cb’ {aka ‘void (*)(uv_work_s*, int)’} [-Wcast-function-type] 366 | uv_queue_work(uv_default_loop(), req, EIO_GetBaudRate, (uv_after_work_cb)EIO_AfterGetBaudRate); | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ ../src/serialport.cpp: In function ‘Nan::NAN_METHOD_RETURN_TYPE Drain(Nan::NAN_METHOD_ARGS_TYPE)’:../src/serialport.cpp:412:52: warning: cast between incompatible function types from ‘void (*)(uv_work_t*)’ {aka ‘void (*)(uv_work_s*)’} to ‘uv_after_work_cb’ {aka ‘void (*)(uv_work_s*, int)’} [-Wcast-function-type] 412 | uv_queue_work(uv_default_loop(), req, EIO_Drain, (uv_after_work_cb)EIO_AfterDrain); | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ ../src/serialport.cpp: At global scope:../src/serialport.cpp:433:28: warning: unnecessary parentheses in declaration of ‘ToParityEnum’ [-Wparentheses] 433 | SerialPortParity NAN_INLINE(ToParityEnum(const v8::Local<v8::String>& v8str)) { | ^../src/serialport.cpp:452:30: warning: unnecessary parentheses in declaration of ‘ToStopBitEnum’ [-Wparentheses] 452 | SerialPortStopBits NAN_INLINE(ToStopBitEnum(double stopBits)) { | ^ In file included from ../../../nan/nan.h:58, from ../src/./serialport.h:13, from ../src/serialport.cpp:1:/home/iobroker/.cache/node-gyp/14.18.3/include/node/node.h:787:7: warning: cast between incompatible function types from ‘void (*)(Nan::ADDON_REGISTER_FUNCTION_ARGS_TYPE)’ {aka ‘void (*)(v8::Local<v8::Object>)’} to ‘node::addon_register_func’ {aka ‘void (*)(v8::Local<v8::Object>, v8::Local<v8::Value>, void*)’} [-Wcast-function-type] 787 | (node::addon_register_func) (regfunc), \ | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~/home/iobroker/.cache/node-gyp/14.18.3/include/node/node.h:821:3: note: in expansion of macro ‘NODE_MODULE_X’ 821 | NODE_MODULE_X(modname, regfunc, NULL, 0) // NOLINT (readability/null_usage) | ^~~~~~~~~~~~~../src/serialport.cpp:486:1: note: in expansion of macro ‘NODE_MODULE’ 486 | NODE_MODULE(serialport, init); | ^~~~~~~~~~~ ../src/serialport_unix.cpp: In function ‘int setup(int, OpenBaton*)’: ../src/serialport_unix.cpp:179:82: warning: ‘%s’ directive output may be truncated writing up to 1023 bytes into a region of size 1005 [-Wformat-truncation=] 179 | snprintf(data->errorString, sizeof(data->errorString), "Error %s Cannot open %s", strerror(errno), data->path); | ^~../src/serialport_unix.cpp:179:13: note: ‘snprintf’ output 20 or more bytes (assuming 1043) into a destination of size 1024 179 | snprintf(data->errorString, sizeof(data->errorString), "Error %s Cannot open %s", strerror(errno), data->path); | ~~~~~~~~^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ ../src/serialport_unix.cpp: In function ‘void EIO_Open(uv_work_t*)’:../src/serialport_unix.cpp:89:84: warning: ‘%s’ directive output may be truncated writing up to 1023 bytes into a region of size 1003 [-Wformat-truncation=] 89 | snprintf(data->errorString, sizeof(data->errorString), "Error: %s, cannot open %s", strerror(errno), data->path); | ^~../src/serialport_unix.cpp:89:13: note: ‘snprintf’ output 22 or more bytes (assuming 1045) into a destination of size 1024 89 | snprintf(data->errorString, sizeof(data->errorString), "Error: %s, cannot open %s", strerror(errno), data->path); | ~~~~~~~~^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ internal/modules/cjs/loader.js:905 throw err; ^Error: Cannot find module 'mime'Require stack:- /opt/iobroker/node_modules/iobroker.js-controller/lib/setup/setupUpload.js- /opt/iobroker/node_modules/iobroker.js-controller/lib/setup/setupUpgrade.js- /opt/iobroker/node_modules/iobroker.js-controller/lib/setup.js- /opt/iobroker/node_modules/iobroker.js-controller/iobroker.js at Function.Module._resolveFilename (internal/modules/cjs/loader.js:902:15) at Function.Module._load (internal/modules/cjs/loader.js:746:27) at Module.require (internal/modules/cjs/loader.js:974:19) at require (internal/modules/cjs/helpers.js:93:18) at Upload.uploadAdapter (/opt/iobroker/node_modules/iobroker.js-controller/lib/setup/setupUpload.js:525:24) at /opt/iobroker/node_modules/iobroker.js-controller/lib/setup/setupUpgrade.js:314:28 at installNpm (/opt/iobroker/node_modules/iobroker.js-controller/lib/setup.js:2569:9) at finishUpgrade (/opt/iobroker/node_modules/iobroker.js-controller/lib/setup/setupUpgrade.js:294:13) at /opt/iobroker/node_modules/iobroker.js-controller/lib/setup/setupUpgrade.js:508:21 at /opt/iobroker/node_modules/iobroker.js-controller/lib/setup/setupInstall.js:239:55 { code: 'MODULE_NOT_FOUND', requireStack: [ '/opt/iobroker/node_modules/iobroker.js-controller/lib/setup/setupUpload.js', '/opt/iobroker/node_modules/iobroker.js-controller/lib/setup/setupUpgrade.js', '/opt/iobroker/node_modules/iobroker.js-controller/lib/setup.js', '/opt/iobroker/node_modules/iobroker.js-controller/iobroker.js' ]} ERROR: Process exited with code 1 -
@fraso
Bring dein System auf Stand, Stretch ist tot.
Deinstallier den terminal-Adapter.
Installier den js-controller neu. -
@thomas-braun
guten morgen
ok. probier ich jetzt. danke. -
jetzt wollte ich mich ernsthaft im iob anmelden um den terminal zu deinstallieren. kann ich aber alles nur auf der ssh Oberfläche machen - logischerweise. da wäre ich für hilfe sehr sehr dankbar. -
Habe das gemacht, iobroker läuft wieder.
Hier meine offenen Fragen:
-
ALLE Adapter grün.
Muss ich etwas mit dem Terminal Adapter noch machen jetzt? -
BACKITUP Update auf 2.2.3 noch mal probieren?
Danke.
e6iob@NUCioBroker:/opt/iobroker$ npm install iobroker.js-controller [sudo] Passwort für e6iob: > iobroker.js-controller@3.3.22 preinstall /opt/iobroker/node_modules/iobroker.js-controller > node lib/preinstallCheck.js NPM version: 6.14.15 > unix-dgram@2.0.3 install /opt/iobroker/node_modules/unix-dgram > node-gyp rebuild make: Verzeichnis „/opt/iobroker/node_modules/unix-dgram/build“ wird betreten CXX(target) Release/obj.target/unix_dgram/src/unix_dgram.o In file included from ../../nan/nan.h:58, from ../src/unix_dgram.cc:5: /home/iobroker/.cache/node-gyp/14.18.3/include/node/node.h:787:7: warning: cast between incompatible function types from ‘void (*)(v8::Local<v8::Object>)’ to ‘node::addon_register_func’ {aka ‘void (*)(v8::Local<v8::Object>, v8::Local<v8::Value>, void*)’} [-Wcast-function-type] 787 | (node::addon_register_func) (regfunc), \ | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ /home/iobroker/.cache/node-gyp/14.18.3/include/node/node.h:821:3: note: in expansion of macro ‘NODE_MODULE_X’ 821 | NODE_MODULE_X(modname, regfunc, NULL, 0) // NOLINT (readability/null_usage) | ^~~~~~~~~~~~~ ../src/unix_dgram.cc:404:1: note: in expansion of macro ‘NODE_MODULE’ 404 | NODE_MODULE(unix_dgram, Initialize) | ^~~~~~~~~~~ SOLINK_MODULE(target) Release/obj.target/unix_dgram.node COPY Release/unix_dgram.node make: Verzeichnis „/opt/iobroker/node_modules/unix-dgram/build“ wird verlassen > ursa-optional@0.9.10 install /opt/iobroker/node_modules/ursa-optional > node rebuild.js ursaNative bindings compilation fail. This is not an issue. Modules that depend on it will use fallbacks. > diskusage@1.1.3 install /opt/iobroker/node_modules/diskusage > node-gyp rebuild make: Verzeichnis „/opt/iobroker/node_modules/diskusage/build“ wird betreten CXX(target) Release/obj.target/diskusage/src/main.o In file included from ../../nan/nan.h:58, from ../src/main.cpp:3: /home/iobroker/.cache/node-gyp/14.18.3/include/node/node.h:787:7: warning: cast between incompatible function types from ‘void (*)(v8::Local<v8::Object>)’ to ‘node::addon_register_func’ {aka ‘void (*)(v8::Local<v8::Object>, v8::Local<v8::Value>, void*)’} [-Wcast-function-type] 787 | (node::addon_register_func) (regfunc), \ | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ /home/iobroker/.cache/node-gyp/14.18.3/include/node/node.h:821:3: note: in expansion of macro ‘NODE_MODULE_X’ 821 | NODE_MODULE_X(modname, regfunc, NULL, 0) // NOLINT (readability/null_usage) | ^~~~~~~~~~~~~ ../src/main.cpp:42:1: note: in expansion of macro ‘NODE_MODULE’ 42 | NODE_MODULE(diskusage, Init) | ^~~~~~~~~~~ CXX(target) Release/obj.target/diskusage/src/diskusage_posix.o SOLINK_MODULE(target) Release/obj.target/diskusage.node COPY Release/diskusage.node make: Verzeichnis „/opt/iobroker/node_modules/diskusage/build“ wird verlassen > iobroker.js-controller@3.3.22 install /opt/iobroker/node_modules/iobroker.js-controller > node iobroker.js setup first object _design/custom updated object _design/system updated The following notifications happened during sync: - Ignoring Directory "hm-rega" because officially not created as meta object. Please remove directory! > @root/acme@3.1.0 postinstall /opt/iobroker/node_modules/@root/acme > node scripts/postinstall > esbuild@0.11.23 postinstall /opt/iobroker/node_modules/esbuild > node install.js npm WARN optional SKIPPING OPTIONAL DEPENDENCY: fsevents@~2.3.2 (node_modules/chokidar/node_modules/fsevents): npm WARN notsup SKIPPING OPTIONAL DEPENDENCY: Unsupported platform for fsevents@2.3.2: wanted {"os":"darwin","arch":"any"} (current: {"os":"linux","arch":"x64"}) npm WARN optional SKIPPING OPTIONAL DEPENDENCY: socksv5@https://github.com/christophgysin/socksv5/tarball/7b4eba5b30ecdb6d9e656dcfede1e6884dc7c6d9 (node_modules/socksv5): npm WARN enoent SKIPPING OPTIONAL DEPENDENCY: ENOENT: no such file or directory, rename '/opt/iobroker/node_modules/.staging/socksv5-5d80f67d/node_modules/cli' -> '/opt/iobroker/node_modules/.staging/cli-c66a16c3' npm WARN optional SKIPPING OPTIONAL DEPENDENCY: fsevents@2.3.2 (node_modules/zigbee-herdsman/node_modules/fsevents): npm WARN notsup SKIPPING OPTIONAL DEPENDENCY: Unsupported platform for fsevents@2.3.2: wanted {"os":"darwin","arch":"any"} (current: {"os":"linux","arch":"x64"}) npm WARN optional SKIPPING OPTIONAL DEPENDENCY: fsevents@2.3.2 (node_modules/zigbee-herdsman-converters/node_modules/zigbee-herdsman/node_modules/fsevents): npm WARN notsup SKIPPING OPTIONAL DEPENDENCY: Unsupported platform for fsevents@2.3.2: wanted {"os":"darwin","arch":"any"} (current: {"os":"linux","arch":"x64"}) npm WARN optional SKIPPING OPTIONAL DEPENDENCY: fsevents@2.3.2 (node_modules/zigbee-herdsman-converters/node_modules/fsevents): npm WARN notsup SKIPPING OPTIONAL DEPENDENCY: Unsupported platform for fsevents@2.3.2: wanted {"os":"darwin","arch":"any"} (current: {"os":"linux","arch":"x64"}) + iobroker.js-controller@3.3.22 added 159 packages from 104 contributors, removed 13 packages and updated 1 package in 46.247s 139 packages are looking for funding run `npm fund` for details e6iob@NUCioBroker:/opt/iobroker$ iobroker start -
-
which nodejs node npm && nodejs -v && node -v && npm -v && whoami && pwd && sudo apt update &> /dev/null && sudo apt update && apt policy nodejsDann bitte
iobroker stop iobroker fix iobroker update -i iobroker list instances -
@thomas-braun sagte in Nach Update auf BACKITUP 2.2.3 startet iobroker nicht menr:
which nodejs node npm && nodejs -v && node -v && npm -v && whoami && pwd && sudo apt update &> /dev/null && sudo apt update && apt policy nodejs
sieht soweit nach meiner Auffassung gut aus.
alle Adapter grün - aber backitup steht noch auf 2.2.2 - obwohl er 2.2.3 auflistet
e6iob@NUCioBroker:~$ which nodejs node npm && nodejs -v && node -v && npm -v && whoami && pwd && sudo apt update &> /dev/null && sudo apt update && apt policy nodejs /usr/bin/nodejs /usr/bin/node /usr/bin/npm v14.18.3 v14.18.3 6.14.15 e6iob /home/e6iob [sudo] Passwort für e6iob: OK:1 http://deb.debian.org/debian bullseye InRelease OK:2 http://deb.debian.org/debian bullseye-updates InRelease OK:3 http://security.debian.org/debian-security bullseye-security InRelease OK:4 https://repos.influxdata.com/debian bullseye InRelease OK:5 https://deb.nodesource.com/node_14.x bullseye InRelease Paketlisten werden gelesen… Fertig Abhängigkeitsbaum wird aufgebaut… Fertig Statusinformationen werden eingelesen… Fertig Aktualisierung für 13 Pakete verfügbar. Führen Sie »apt list --upgradable« aus, um sie anzuzeigen. nodejs: Installiert: 14.18.3-deb-1nodesource1 Installationskandidat: 14.18.3-deb-1nodesource1 Versionstabelle: *** 14.18.3-deb-1nodesource1 500 500 https://deb.nodesource.com/node_14.x bullseye/main amd64 Packages 100 /var/lib/dpkg/status 12.22.5~dfsg-2~11u1 500 500 http://deb.debian.org/debian bullseye/main amd64 Packages 500 http://security.debian.org/debian-security bullseye-security/main amd64 Packages e6iob@NUCioBroker:~$========================================================================== Your installation was fixed successfully Run iobroker start to start ioBroker again! ========================================================================== e6iob@NUCioBroker:~$ iobroker update -i Used repository: latest hash changed or no sources cached => force download of new sources update done Adapter "admin" : 5.2.3 , installed 5.2.3 Adapter "alexa2" : 3.11.2 , installed 3.12.0 Adapter "backitup" : 2.2.3 , installed 2.2.3 Adapter "cloud" : 4.1.0 , installed 4.1.0 Adapter "devices" : 1.0.9 , installed 1.0.9 Adapter "discovery" : 2.7.3 , installed 2.7.3 Adapter "fb-checkpresence": 1.1.12 , installed 1.1.12 Adapter "flot" : 1.10.7 , installed 1.10.7 Adapter "fritzdect" : 2.2.3 , installed 2.2.3 Adapter "habpanel" : 0.4.3 , installed 0.4.3 Adapter "ham" : 4.0.2 , installed 4.0.2 Adapter "history" : 1.9.14 , installed 1.9.14 Adapter "hm-rega" : 3.0.33 , installed 3.0.33 Adapter "hm-rpc" : 1.15.0 , installed 1.15.0 Adapter "hs100" : 2.0.6 , installed 2.0.6 Adapter "ical" : 1.11.4 , installed 1.11.4 Adapter "icons-mfd-png" : 1.0.2 , installed 1.0.2 Adapter "influxdb" : 1.9.5 , installed 1.9.5 Adapter "iot" : 1.8.24 , installed 1.8.24 Adapter "javascript" : 5.2.13 , installed 5.2.13 Controller "js-controller" : 3.3.22 , installed 3.3.22 Adapter "mihome" : 1.3.7 , installed 1.3.7 Adapter "mihome-plug" : 0.2.1 , installed 0.2.1 Adapter "mqtt" : 2.4.0 , installed 2.4.0 Adapter "node-red" : 2.4.1 , installed 2.4.1 Adapter "parser" : 1.0.7 , installed 1.0.7 Adapter "ping" : 1.5.0 , installed 1.5.0 Adapter "ring" : 1.2.8 , installed 1.2.8 Adapter "shelly" : 4.0.7 , installed 4.0.7 Adapter "simple-api" : 2.6.1 , installed 2.6.2 Adapter "socketio" : 3.1.4 , installed 3.1.5 Adapter "sonoff" : 2.4.5 , installed 2.4.5 Adapter "systeminfo" : 0.3.1 , installed 0.3.1 Adapter "telegram" : 1.10.0 , installed 1.10.0 Adapter "terminal" : 0.1.2 , installed 0.1.2 Adapter "text2command" : 2.1.1 , installed 2.1.1 Adapter "vis" : 1.4.5 , installed 1.4.5 Adapter "vis-jqui-mfd" : 1.0.12 , installed 1.0.12 Adapter "vis-weather" : 2.5.5 , installed 2.5.5 Adapter "web" : 3.4.9 , installed 3.4.9 Adapter "whatsapp-cmb" : 0.1.6 , installed 0.1.6 Adapter "yeelight-2" : 1.1.2 , installed 1.1.2 Adapter "zigbee" : 1.6.6 , installed 1.6.6 e6iob@NUCioBroker:~$ iobroker list instances system.adapter.admin.0 : admin : NUCioBroker - enabled, port: 8081, bind: 0.0.0.0, run as: admin system.adapter.alexa2.0 : alexa2 : NUCioBroker - enabled system.adapter.backitup.0 : backitup : NUCioBroker - enabled system.adapter.cloud.0 : cloud : NUCioBroker - enabled system.adapter.devices.0 : devices : NUCioBroker - disabled system.adapter.discovery.0 : discovery : NUCioBroker - enabled system.adapter.fb-checkpresence.0 : fb-checkpresence : NUCioBroker - enabled system.adapter.flot.0 : flot : NUCioBroker - disabled system.adapter.fritzdect.0 : fritzdect : NUCioBroker - enabled system.adapter.habpanel.0 : habpanel : NUCioBroker - disabled system.adapter.ham.0 : ham : NUCioBroker - enabled system.adapter.history.0 : history : NUCioBroker - enabled system.adapter.hm-rega.0 : hm-rega : NUCioBroker - enabled system.adapter.hm-rega.1 : hm-rega : NUCioBroker - enabled system.adapter.hm-rega.2 : hm-rega : NUCioBroker - enabled system.adapter.hm-rega.3 : hm-rega : NUCioBroker - enabled system.adapter.hm-rega.4 : hm-rega : NUCioBroker - disabled system.adapter.hm-rega.5 : hm-rega : NUCioBroker - disabled system.adapter.hm-rpc.0 : hm-rpc : NUCioBroker - enabled, port: 0 system.adapter.hm-rpc.1 : hm-rpc : NUCioBroker - enabled, port: 0 system.adapter.hm-rpc.2 : hm-rpc : NUCioBroker - enabled, port: 0 system.adapter.hm-rpc.3 : hm-rpc : NUCioBroker - enabled, port: 0 system.adapter.hm-rpc.4 : hm-rpc : NUCioBroker - disabled, port: 0 system.adapter.hm-rpc.5 : hm-rpc : NUCioBroker - disabled, port: 0 system.adapter.hs100.0 : hs100 : NUCioBroker - enabled system.adapter.ical.0 : ical : NUCioBroker - enabled system.adapter.icons-mfd-png.0 : icons-mfd-png : NUCioBroker - disabled system.adapter.influxdb.0 : influxdb : NUCioBroker - enabled, port: 8086 system.adapter.iot.0 : iot : NUCioBroker - enabled system.adapter.javascript.0 : javascript : NUCioBroker - enabled system.adapter.mihome-plug.0 : mihome-plug : NUCioBroker - disabled, port: 54321 system.adapter.mihome.0 : mihome : NUCioBroker - disabled, port: 9898, bind: 192.168.178.35 system.adapter.mqtt.0 : mqtt : NUCioBroker - enabled, port: 1885, bind: 0.0.0.0 system.adapter.node-red.0 : node-red : NUCioBroker - enabled, port: 1880, bind: 192.168.178.35 system.adapter.parser.0 : parser : NUCioBroker - enabled system.adapter.ping.0 : ping : NUCioBroker - enabled system.adapter.ring.0 : ring : NUCioBroker - enabled system.adapter.shelly.0 : shelly : NUCioBroker - enabled, port: 1886, bind: 0.0.0.0 system.adapter.simple-api.0 : simple-api : NUCioBroker - enabled, port: 8087, bind: 0.0.0.0, run as: admin system.adapter.sonoff.0 : sonoff : NUCioBroker - disabled, port: 1884, bind: 0.0.0.0 system.adapter.systeminfo.0 : systeminfo : NUCioBroker - enabled system.adapter.telegram.0 : telegram : NUCioBroker - enabled, port: 8443, bind: 0.0.0.0 system.adapter.terminal.0 : terminal : NUCioBroker - enabled, port: 8089, bind: 192.168.178.35, run as: admin system.adapter.text2command.0 : text2command : NUCioBroker - enabled system.adapter.vis-jqui-mfd.0 : vis-jqui-mfd : NUCioBroker - disabled system.adapter.vis-weather.0 : vis-weather : NUCioBroker - disabled system.adapter.vis.0 : vis : NUCioBroker - enabled system.adapter.web.0 : web : NUCioBroker - enabled, port: 8082, bind: 0.0.0.0, run as: admin system.adapter.whatsapp-cmb.0 : whatsapp-cmb : NUCioBroker - enabled system.adapter.yeelight-2.0 : yeelight-2 : NUCioBroker - enabled system.adapter.zigbee.0 : zigbee : NUCioBroker - enabled, port: tcp://192.168.178.126:6638 + instance is alive e6iob@NUCioBroker:~$ -
@fraso sagte in Nach Update auf BACKITUP 2.2.3 startet iobroker nicht menr:
Aktualisierung für 13 Pakete verfügbar.
sudo apt full-upgrade sudo rebootDanach
iobroker del iobroker.terminal iobroker upload all -
@thomas-braun sagte in Nach Update auf BACKITUP 2.2.3 startet iobroker nicht menr:
iobroker upload all
Fehlerfrei durchgelaufen.
Instanz zeigt jetzt 2.2.3Danke - mal wieder.
Ich liebe den iobroker und das Forum. Danke!
