Test Alpha Homekit-Controller 0.0.x
-
@apollon77 said in Test Alpha Homekit-Controller 0.0.x:
Wenn der Adapter sagt das das gerät bereits gepaired ist dann ist das erstmal so. Dann musst DU das Gerät resetten oder aus von da wo es gepaired ist wieder unpairen, Ein Gerät kann nur mit einem Controller gepaired sein.
thx dafür. Das eine gepairte ist ja der iobroker als bridge selber. Die schaltbare Steckdosenleiste hatte ich ja resettet. Aber wo/wie kann ich den Pairingcode dann eingeben? Ich habe ja nicht den DP, mit dem ich das Triggern kann. So hatte ich das zumindest bei Github gelesen.
-
@tklein wenn er ein Gerät als „ready to pair“ findet dann erscheint der state Bzw in der ui gibt es die Möglichkeit es zu pairen. Das debug log zeigt das dann auch so an … war bei dir oben aber nicht der Fall. Also sicher das reset geklappt hat?
-
@apollon77 said in Test Alpha Homekit-Controller 0.0.x:
Also sicher das reset geklappt hat?
jetzt sieht es zmindest etwas besser aus, Pairen geht aber immer nch nicht. Den Pin habe ich mit xxx-xx-xxx angegeben. Im DP und in der GUI-Popup
Nachtrag:
Jetzt konnte ich erfolgreich pairen. Keine Ahnung warum die Steckerleiste doppelt drin ist (mit unterschiedlichen IDs:
-
1.) EHOSTUNREACH bedeutet das das gerät in deinem Netzwerk nicht erreichbar war zu dem Zeitpunkt
2.) Was heisst "in Vocolinc App konfiguriert"? Hast du es dann dort gepaired? Naja dann kanns nicht nochmal sein
3.) Ich denke das Gerät hat mit dem Reset (oder dem pairing) seine ID gendert, damit kennt der Adapter beide. Kannst du in den Adapter-Objekten löschen
-
@apollon77 said in Test Alpha Homekit-Controller 0.0.x:
1.) EHOSTUNREACH bedeutet das das gerät in deinem Netzwerk nicht erreichbar war zu dem Zeitpunkt
--> thx für die Info
2.) Was heisst "in Vocolinc App konfiguriert"? Hast du es dann dort gepaired? Naja dann kanns nicht nochmal sein
--> nachdem es nach dem reset nicht geklappt hatte, habe ich das Device in der entsprechende App angelernt. Mir war/ist nicht bekannt, wie nach einem Device ohne konfigurierten WLAN nur mit dem Code eine Verbindung mit dem IOB erstellt werden kann
3.) Ich denke das Gerät hat mit dem Reset (oder dem pairing) seine ID gendert, damit kennt der Adapter beide. Kannst du in den Adapter-Objekten löschen
--> ok, werde ich dann löschen -
@apollon77 Versuche ein Eve Energy zu koppeln, aber ohne Erfolg.
Hardware ist ein RPI4 mit integriertem Bluetooth.Noch eine Idee?
2022-02-13 12:30:06.032 - debug: homekit-controller.0 (17060) Discovered BLE device up: 0d:30:8f:xx:xx:xx/Eve Energy EA06 2022-02-13 12:30:06.033 - debug: homekit-controller.0 (17060) BLE-0D:30:8F:xx:xx:xx Discovered BLE device: {"name":"Eve Energy EA06","CoID":76,"TY":6,"AIL":49,"SF":1,"DeviceID":"0d:30:8f:xx:xx:xx","ACID":7,"GSN":1,"CN":3,"CV":2,"c#":3,"id":"0d:30:8f:xx:xx:xx","ci":7,"availableToPair":true} 2022-02-13 12:30:06.035 - info: homekit-controller.0 (17060) BLE-0D:30:8F:xx:xx:xx (Eve Energy EA06) found without pairing data but available for pairing: Create basic objects 2022-02-13 12:30:06.036 - debug: homekit-controller.0 (17060) Service: {"name":"Eve Energy EA06","CoID":76,"TY":6,"AIL":49,"SF":1,"DeviceID":"0d:30:8f:xx:xx:xx","ACID":7,"GSN":1,"CN":3,"CV":2,"c#":3,"id":"0d:30:8f:xx:xx:xx","ci":7,"availableToPair":true} 2022-02-13 12:30:06.088 - debug: homekit-controller.0 (17060) state homekit-controller.0.BLE-0D:30:8F:xx:xx:xx.info.connectionType changed: BLE (ack = true) 2022-02-13 12:30:06.114 - debug: homekit-controller.0 (17060) state homekit-controller.0.BLE-0D:30:8F:xx:xx:xx.info.id changed: 0d:30:8f:xx:xx:xx (ack = true) 2022-02-13 12:30:06.136 - debug: homekit-controller.0 (17060) state homekit-controller.0.BLE-0D:30:8F:xx:xx:xx.info.connected changed: false (ack = true) 2022-02-13 12:30:06.158 - debug: homekit-controller.0 (17060) state homekit-controller.0.BLE-0D:30:8F:xx:xx:xx.admin.isPaired changed: false (ack = true) 2022-02-13 12:30:06.171 - debug: homekit-controller.0 (17060) state homekit-controller.0.BLE-0D:30:8F:xx:xx:xx.info.lastDiscovered changed: 1644751806037 (ack = true) 2022-02-13 12:30:36.166 - debug: homekit-controller.0 (17060) Message getDiscoveredDevices received: {"command":"getDiscoveredDevices","message":null,"from":"system.adapter.admin.0","callback":{"message":null,"id":77,"ack":false,"time":1644751836163},"_id":61388363}) 2022-02-13 12:30:36.167 - debug: homekit-controller.0 (17060) Response to Command getDiscoveredDevices: {"success":true,"error":false,"devices":[{"id":"BLE-0D:30:8F:xx:xx:xx","serviceType":"BLE","connected":false,"discovered":true,"availableToPair":true,"discoveredName":"Eve Energy EA06","discoveredCategory":"Outlet","pairedWithThisInstance":false},{"id":"BLE-14:36:5E:xx:xx:xx","serviceType":"BLE","connected":false,"discovered":true,"availableToPair":false,"discoveredName":"Nuki_XXXXX","discoveredCategory":"Lock","pairedWithThisInstance":false}]} 2022-02-13 12:30:36.169 - debug: homekit-controller.0 (17060) sendTo "getDiscoveredDevices" to system.adapter.admin.0 from system.adapter.homekit-controller.0 2022-02-13 12:30:48.359 - debug: homekit-controller.0 (17060) Message pairDevice received: {"command":"pairDevice","message":{"deviceId":"BLE-0D:30:8F:xx:xx:xx","pin":"yyy-yy-yyy"},"from":"system.adapter.admin.0","callback":{"message":{"deviceId":"BLE-0D:30:8F:xx:xx:xx","pin":"yyy-yy-yyy"},"id":78,"ack":false,"time":1644751848356},"_id":61388364}) hap-controller:gatt-connection connect peripheral +0ms hap-controller:gatt-connection dbc159db8b1b/db:c1:59:db:8b:1b Write for characteristic 0000004f0000100080000026bb765291 0003001100 +857ms hap-controller:gatt-connection dbc159db8b1b/db:c1:59:db:8b:1b Received data for characteristic 0000004f0000100080000026bb765291 0200000300010102 +58ms hap-controller:gatt-connection disconnect peripheral +1ms hap-controller:gatt-connection Peripheral disconnected +16ms 2022-02-13 12:30:49.301 - info: homekit-controller.0 (17060) Use PairMethod 0 to pair BLE-0D:30:8F:xx:xx:xx 2022-02-13 12:30:49.303 - debug: homekit-controller.0 (17060) BLE-0D:30:8F:xx:xx:xx Start Homekit Device Client initialization hap-controller:gatt-connection connect peripheral +8ms hap-controller:gatt-connection Peripheral disconnected +308ms 2022-02-13 12:30:49.616 - debug: homekit-controller.0 (17060) Response to Command pairDevice: {"success":false,"error":"Cannot pair with device BLE-0D:30:8F:xx:xx:xx because of error undefined (undefined): undefined"} 2022-02-13 12:30:49.617 - debug: homekit-controller.0 (17060) sendTo "pairDevice" to system.adapter.admin.0 from system.adapter.homekit-controller.0 -
@pql In dem Fall bekommt das Adapter keine Antwort vom Gerät. Geht ein Identify? Ich hab inzwischen so bissl da sGefühl das der RPI "Onboard" BLE zickig ist ... ggf mal mit nem BLE USB Stick versuchen?
-
@apollon77 Identify funktioniert, Gerät blinkt entsprechend und der Debug bestätigt dies auch mit einem "Success"
2022-02-13 13:36:36.527 - debug: homekit-controller.0 (28302) Message identify received: {"command":"identify","message":{"deviceId":"BLE-0D:30:8F:xx:xx:xx"},"from":"system.adapter.admin.0","callback":{"message":{"deviceId":"BLE-0D:30:8F:xx:xx:xx"},"id":95,"ack":false,"time":1644755796524},"_id":61388381}) 2022-02-13 13:36:36.529 - debug: homekit-controller.0 (28302) Device BLE-0D:30:8F:xx:xx:xx: Identify triggered hap-controller:gatt-connection connect peripheral +0ms hap-controller:tlv Add 1 bytes for tag 1: 01 +0ms hap-controller:gatt-connection dbc159db8b1b/db:c1:59:db:8b:1b Write for characteristic 000000140000100080000026bb765291 00020002000300010101 +924ms hap-controller:gatt-connection dbc159db8b1b/db:c1:59:db:8b:1b Received data for characteristic 000000140000100080000026bb765291 020000 +59ms hap-controller:gatt-connection disconnect peripheral +0ms hap-controller:gatt-connection Peripheral disconnected +17ms 2022-02-13 13:36:37.538 - debug: homekit-controller.0 (28302) Response to Command identify: {"success":true,"error":false} 2022-02-13 13:36:37.542 - debug: homekit-controller.0 (28302) sendTo "identify" to system.adapter.admin.0 from system.adapter.homekit-controller.0USB BLE Stick hab ich nicht zur Hand, müsste mir dann erst einen besorgen
-
@pql Also beimn Pairen sieht man das das Gerät auf den Connect versuch antwortet wo die unterstützten Pairing Methoden gelesen werden.Danach aber eine zweite Verbindung nicht annimmt um das eigentliche Pairing zu machen. Ich schaue nachher nochmal
EDIT: Code Seitig sieht an sich alles korrekt aus ... keine Ahnung warum das zickt und kann es auch nicht nachstellen
-
@apollon77 Hab jetzt einen USB Stick, gleiches Spiel; Identify funktioniert, Pairing nicht.
Log-Output ist diesmal aber etwas mehr was den Pairing Connect an geht.. Es kommt auf jeden Fall etwas zurück
2022-02-15 17:46:01.425 - debug: homekit-controller.0 (3773) Message pairDevice received: {"command":"pairDevice","message":{"deviceId":"BLE-0D:30:8F:xx:xx:xx","pin":"xxx-xx-xxx"},"from":"system.adapter.admin.0","callback":{"message":{"deviceId":"BLE-0D:30:8F:xx:xx:xx","pin":"xxx-xx-xxx"},"id":16,"ack":false,"time":1644943561422},"_id":32016392}) hap-controller:gatt-connection connect peripheral +16s hap-controller:gatt-connection dbc159db8b1b/db:c1:59:db:8b:1b Write for characteristic 0000004f0000100080000026bb765291 0003001100 +538ms hap-controller:gatt-connection dbc159db8b1b/db:c1:59:db:8b:1b Received data for characteristic 0000004f0000100080000026bb765291 0200000300010102 +75ms hap-controller:gatt-connection disconnect peripheral +0ms hap-controller:gatt-connection Peripheral disconnected +2s 2022-02-15 17:46:04.048 - info: homekit-controller.0 (3773) Use PairMethod 0 to pair BLE-0D:30:8F:xx:xx:xx 2022-02-15 17:46:04.051 - debug: homekit-controller.0 (3773) BLE-0D:30:8F:xx:xx:xx Start Homekit Device Client initialization hap-controller:gatt-connection connect peripheral +7ms hap-controller:tlv Add 1 bytes for tag 6: 01 +19s hap-controller:tlv Add 1 bytes for tag 0: 00 +1ms hap-controller:tlv Add 6 bytes for tag 1: 060101000100 +0ms hap-controller:tlv Add 1 bytes for tag 9: 01 +0ms hap-controller:gatt-connection dbc159db8b1b/db:c1:59:db:8b:1b Write for characteristic 0000004c0000100080000026bb765291 0002000f000b000106060101000100090101 +435ms hap-controller:gatt-connection dbc159db8b1b/db:c1:59:db:8b:1b Received data for characteristic 0000004c0000100080000026bb765291 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 +583ms hap-controller:gatt-connection Peripheral disconnected +45ms 2022-02-15 17:46:05.118 - debug: homekit-controller.0 (3773) Response to Command pairDevice: {"success":false,"error":"Cannot pair with device BLE-0D:30:8F:xx:xx:xx because of error undefined (undefined): undefined"} 2022-02-15 17:46:05.119 - debug: homekit-controller.0 (3773) sendTo "pairDevice" to system.adapter.admin.0 from system.adapter.homekit-controller.0 -
@pql Inndem Fall kommt er etwas weiter aber das Gerät macht immer noch einen Disconnect. IST es vllt zu nah oder zu weit weg? mal frisch resetten?
Also wenn ich es richtig verstehe, dann sagen die Daten das 500 Byte kommen, es sind aber nur 150 und dann disconnect ...
-
@apollon77 frisch resettet (mehrfach) und näher dran leider ohne Erfolg. Gleiche Thematik.
Aber ok, dann wird das wohl am Eve Energy liegen. Direktes Pairing mit iOS funktioniert tadelos.
-
@pql ich hab auch einen eve Energy undeniable mir tut alles - aber von nem Mac aus.
Also du könntest jetzt nochmal das hci debugging parallel laufen lassen. Siehe troubleshooting in der readme. Vllt sieht man da noch was.
-
@apollon77
So bin gerade mal wieder mit Eve am testen aber mit gleichem Ergebnis....
Über BLE zickt er immer noch.2022-02-16 19:05:03.537 - debug: homekit-controller.0 (115079) Redis Objects: Use Redis connection: 127.0.0.1:9001 2022-02-16 19:05:03.642 - debug: homekit-controller.0 (115079) Objects client ready ... initialize now 2022-02-16 19:05:03.647 - debug: homekit-controller.0 (115079) Objects create System PubSub Client 2022-02-16 19:05:03.650 - debug: homekit-controller.0 (115079) Objects create User PubSub Client 2022-02-16 19:05:03.753 - debug: homekit-controller.0 (115079) Objects client initialize lua scripts 2022-02-16 19:05:03.779 - debug: homekit-controller.0 (115079) Objects connected to redis: 127.0.0.1:9001 2022-02-16 19:05:03.816 - debug: homekit-controller.0 (115079) Redis States: Use Redis connection: 127.0.0.1:6379 2022-02-16 19:05:03.828 - debug: homekit-controller.0 (115079) States create System PubSub Client 2022-02-16 19:05:03.830 - debug: homekit-controller.0 (115079) States create User PubSub Client 2022-02-16 19:05:03.846 - debug: homekit-controller.0 (115079) States connected to redis: 127.0.0.1:6379 2022-02-16 19:05:03.913 - debug: homekit-controller.0 (115079) Plugin sentry Initialize Plugin (enabled=true) 2022-02-16 19:05:04.430 - info: homekit-controller.0 (115079) starting. Version 0.4.3 in /opt/iobroker/node_modules/iobroker.homekit-controller, node: v14.19.0, js-controller: 4.0.10 2022-02-16 19:05:04.709 - debug: homekit-controller.0 (115079) state homekit-controller.0.info.connection changed: false (ack = true) 2022-02-16 19:05:04.710 - debug: homekit-controller.0 (115079) Init 2 known devices without discovery ... 2022-02-16 19:05:04.711 - debug: homekit-controller.0 (115079) Init IP-10:92:E9:E7:AE:8F as known device 2022-02-16 19:05:04.713 - info: homekit-controller.0 (115079) IP-10:92:E9:E7:AE:8F (Eve Extend C054) found without pairing data but available for pairing: Create basic objects 2022-02-16 19:05:04.714 - debug: homekit-controller.0 (115079) Service: {"name":"Eve Extend C054","address":"192.168.95.50","port":8080,"c#":12,"ff":1,"id":"10:92:E9:E7:AE:8F","md":"Eve Extend 20EAB9901","pv":"1.1","s#":1,"sf":1,"ci":2,"availableToPair":true} 2022-02-16 19:05:04.765 - debug: homekit-controller.0 (115079) state homekit-controller.0.IP-10:92:E9:E7:AE:8F.info.connectionType changed: IP (ack = true) 2022-02-16 19:05:04.778 - debug: homekit-controller.0 (115079) state homekit-controller.0.IP-10:92:E9:E7:AE:8F.info.id changed: 10:92:E9:E7:AE:8F (ack = true) 2022-02-16 19:05:04.792 - debug: homekit-controller.0 (115079) state homekit-controller.0.IP-10:92:E9:E7:AE:8F.info.address changed: 192.168.95.50 (ack = true) 2022-02-16 19:05:04.804 - debug: homekit-controller.0 (115079) state homekit-controller.0.IP-10:92:E9:E7:AE:8F.info.connected changed: false (ack = true) 2022-02-16 19:05:04.827 - debug: homekit-controller.0 (115079) state homekit-controller.0.IP-10:92:E9:E7:AE:8F.admin.isPaired changed: false (ack = true) 2022-02-16 19:05:04.841 - debug: homekit-controller.0 (115079) state homekit-controller.0.IP-10:92:E9:E7:AE:8F.info.lastDiscovered changed: 1645034704716 (ack = true) 2022-02-16 19:05:04.860 - debug: homekit-controller.0 (115079) Init BLE-EA:80:43:5F:2E:FE as known device 2022-02-16 19:05:04.861 - info: homekit-controller.0 (115079) BLE-EA:80:43:5F:2E:FE (Eve Degree 5980) found without pairing data but available for pairing: Create basic objects 2022-02-16 19:05:04.862 - debug: homekit-controller.0 (115079) Service: {"name":"Eve Degree 5980","CoID":76,"TY":6,"AIL":49,"SF":1,"DeviceID":"ea:80:43:5f:2e:fe","ACID":10,"GSN":1,"CN":3,"CV":2,"c#":3,"id":"ea:80:43:5f:2e:fe","ci":10,"availableToPair":true} 2022-02-16 19:05:04.900 - debug: homekit-controller.0 (115079) state homekit-controller.0.BLE-EA:80:43:5F:2E:FE.info.connectionType changed: BLE (ack = true) 2022-02-16 19:05:04.913 - debug: homekit-controller.0 (115079) Discovered IP device up: 10:92:E9:E7:AE:8F/Eve Extend C054 2022-02-16 19:05:04.914 - debug: homekit-controller.0 (115079) IP-10:92:E9:E7:AE:8F Discovered IP device: {"name":"Eve Extend C054","address":"192.168.95.50","port":8080,"c#":14,"ff":1,"id":"10:92:E9:E7:AE:8F","md":"Eve Extend 20EAB9901","pv":"1.1","s#":1,"sf":0,"ci":2,"availableToPair":false} 2022-02-16 19:05:04.915 - info: homekit-controller.0 (115079) IP-10:92:E9:E7:AE:8F (Eve Extend C054) found without known pairing data and already paired: ignoring 2022-02-16 19:05:04.930 - debug: homekit-controller.0 (115079) state homekit-controller.0.BLE-EA:80:43:5F:2E:FE.info.id changed: ea:80:43:5f:2e:fe (ack = true) 2022-02-16 19:05:04.943 - debug: homekit-controller.0 (115079) state homekit-controller.0.BLE-EA:80:43:5F:2E:FE.info.connected changed: false (ack = true) 2022-02-16 19:05:04.966 - debug: homekit-controller.0 (115079) state homekit-controller.0.BLE-EA:80:43:5F:2E:FE.admin.isPaired changed: false (ack = true) 2022-02-16 19:05:04.979 - debug: homekit-controller.0 (115079) state homekit-controller.0.BLE-EA:80:43:5F:2E:FE.info.lastDiscovered changed: 1645034704863 (ack = true) 2022-02-16 19:05:05.002 - debug: homekit-controller.0 (115079) Discovered IP device up: 47:FB:8F:AA:80:82/Eve Extend 726E 2022-02-16 19:05:05.003 - debug: homekit-controller.0 (115079) IP-47:FB:8F:AA:80:82 Discovered IP device: {"name":"Eve Extend 726E","address":"169.254.182.94","port":8080,"c#":5,"ff":1,"id":"47:FB:8F:AA:80:82","md":"Eve Extend 20EAB9901","pv":"1.1","s#":1,"sf":0,"ci":2,"availableToPair":false} 2022-02-16 19:05:05.004 - info: homekit-controller.0 (115079) IP-47:FB:8F:AA:80:82 (Eve Extend 726E) found without known pairing data and already paired: ignoring 2022-02-16 19:05:05.636 - debug: homekit-controller.0 (115079) Discovered BLE device up: f6:36:ed:19:09:14/Eve Thermo 8FE8 2022-02-16 19:05:05.636 - debug: homekit-controller.0 (115079) BLE-F6:36:ED:19:09:14 Discovered BLE device: {"name":"Eve Thermo 8FE8","CoID":76,"TY":6,"AIL":49,"SF":0,"DeviceID":"f6:36:ed:19:09:14","ACID":9,"GSN":8861,"CN":5,"CV":2,"c#":5,"id":"f6:36:ed:19:09:14","ci":9,"availableToPair":false} 2022-02-16 19:05:05.637 - info: homekit-controller.0 (115079) BLE-F6:36:ED:19:09:14 (Eve Thermo 8FE8) found without known pairing data and already paired: ignoring 2022-02-16 19:05:05.951 - debug: homekit-controller.0 (115079) Discovered IP device up: 77:a2:42:96:a1:50/ioBroker B13E 2022-02-16 19:05:05.951 - debug: homekit-controller.0 (115079) IP-77:A2:42:96:A1:50 Discovered IP device: {"name":"ioBroker B13E","address":"192.168.95.212","port":44763,"c#":21,"ff":0,"id":"77:a2:42:96:a1:50","md":"not configured","pv":"1.1","s#":1,"sf":0,"ci":2,"availableToPair":false} 2022-02-16 19:05:05.952 - info: homekit-controller.0 (115079) IP-77:A2:42:96:A1:50 (ioBroker B13E) found without known pairing data and already paired: ignoring 2022-02-16 19:05:07.173 - debug: homekit-controller.0 (115079) Discovered BLE device up: ea:80:43:5f:2e:fe/Eve 2022-02-16 19:05:07.174 - debug: homekit-controller.0 (115079) BLE-EA:80:43:5F:2E:FE Discovered BLE device: {"name":"Eve","CoID":76,"TY":6,"AIL":49,"SF":1,"DeviceID":"ea:80:43:5f:2e:fe","ACID":10,"GSN":1,"CN":3,"CV":2,"c#":3,"id":"ea:80:43:5f:2e:fe","ci":10,"availableToPair":true} 2022-02-16 19:05:07.174 - info: homekit-controller.0 (115079) BLE-EA:80:43:5F:2E:FE (Eve) found without pairing data but available for pairing: Create basic objects 2022-02-16 19:05:07.175 - debug: homekit-controller.0 (115079) Service: {"name":"Eve","CoID":76,"TY":6,"AIL":49,"SF":1,"DeviceID":"ea:80:43:5f:2e:fe","ACID":10,"GSN":1,"CN":3,"CV":2,"c#":3,"id":"ea:80:43:5f:2e:fe","ci":10,"availableToPair":true} 2022-02-16 19:05:07.218 - debug: homekit-controller.0 (115079) state homekit-controller.0.BLE-EA:80:43:5F:2E:FE.info.connectionType changed: BLE (ack = true) 2022-02-16 19:05:07.237 - debug: homekit-controller.0 (115079) state homekit-controller.0.BLE-EA:80:43:5F:2E:FE.info.id changed: ea:80:43:5f:2e:fe (ack = true) 2022-02-16 19:05:07.268 - debug: homekit-controller.0 (115079) state homekit-controller.0.BLE-EA:80:43:5F:2E:FE.info.connected changed: false (ack = true) 2022-02-16 19:05:07.334 - debug: homekit-controller.0 (115079) state homekit-controller.0.BLE-EA:80:43:5F:2E:FE.admin.isPaired changed: false (ack = true) 2022-02-16 19:05:07.354 - debug: homekit-controller.0 (115079) state homekit-controller.0.BLE-EA:80:43:5F:2E:FE.info.lastDiscovered changed: 1645034707176 (ack = true) 2022-02-16 19:05:07.736 - debug: homekit-controller.0 (115079) Message getDiscoveredDevices received: {"command":"getDiscoveredDevices","message":null,"from":"system.adapter.admin.0","callback":{"message":null,"id":51,"ack":false,"time":1645034707733},"_id":61965836}) 2022-02-16 19:05:07.738 - debug: homekit-controller.0 (115079) Response to Command getDiscoveredDevices: {"success":true,"error":false,"devices":[{"id":"BLE-EA:80:43:5F:2E:FE","serviceType":"BLE","connected":false,"discovered":true,"availableToPair":true,"discoveredName":"Eve","discoveredCategory":"Sensor","pairedWithThisInstance":false},{"id":"IP-10:92:E9:E7:AE:8F","serviceType":"IP","connected":false,"discovered":true,"availableToPair":false,"discoveredName":"Eve Extend C054","discoveredCategory":"Bridge","pairedWithThisInstance":false},{"id":"IP-47:FB:8F:AA:80:82","serviceType":"IP","connected":false,"discovered":true,"availableToPair":false,"discoveredName":"Eve Extend 726E","discoveredCategory":"Bridge","pairedWithThisInstance":false},{"id":"BLE-F6:36:ED:19:09:14","serviceType":"BLE","connected":false,"discovered":true,"availableToPair":false,"discoveredName":"Eve Thermo 8FE8","discoveredCategory":"Thermostat","pairedWithThisInstance":false},{"id":"IP-77:A2:42:96:A1:50","serviceType":"IP","connected":false,"discovered":true,"availableToPair":false,"discoveredName":"ioBroker B13E","discoveredCategory":"Bridge","pairedWithThisInstance":false}]} 2022-02-16 19:05:12.329 - debug: homekit-controller.0 (115079) Message identify received: {"command":"identify","message":{"deviceId":"BLE-EA:80:43:5F:2E:FE"},"from":"system.adapter.admin.0","callback":{"message":{"deviceId":"BLE-EA:80:43:5F:2E:FE"},"id":52,"ack":false,"time":1645034712328},"_id":61965837}) 2022-02-16 19:05:12.330 - debug: homekit-controller.0 (115079) Device BLE-EA:80:43:5F:2E:FE: Identify triggered 2022-02-16 19:05:17.002 - debug: homekit-controller.0 (115079) Response to Command identify: {"success":true,"error":false} 2022-02-16 19:05:18.514 - debug: homekit-controller.0 (115079) Message getDiscoveredDevices received: {"command":"getDiscoveredDevices","message":null,"from":"system.adapter.admin.0","callback":{"message":null,"id":53,"ack":false,"time":1645034718512},"_id":61965838}) 2022-02-16 19:05:18.515 - debug: homekit-controller.0 (115079) Response to Command getDiscoveredDevices: {"success":true,"error":false,"devices":[{"id":"BLE-EA:80:43:5F:2E:FE","serviceType":"BLE","connected":false,"discovered":true,"availableToPair":true,"discoveredName":"Eve","discoveredCategory":"Sensor","pairedWithThisInstance":false},{"id":"IP-10:92:E9:E7:AE:8F","serviceType":"IP","connected":false,"discovered":true,"availableToPair":false,"discoveredName":"Eve Extend C054","discoveredCategory":"Bridge","pairedWithThisInstance":false},{"id":"IP-47:FB:8F:AA:80:82","serviceType":"IP","connected":false,"discovered":true,"availableToPair":false,"discoveredName":"Eve Extend 726E","discoveredCategory":"Bridge","pairedWithThisInstance":false},{"id":"BLE-F6:36:ED:19:09:14","serviceType":"BLE","connected":false,"discovered":true,"availableToPair":false,"discoveredName":"Eve Thermo 8FE8","discoveredCategory":"Thermostat","pairedWithThisInstance":false},{"id":"IP-77:A2:42:96:A1:50","serviceType":"IP","connected":false,"discovered":true,"availableToPair":false,"discoveredName":"ioBroker B13E","discoveredCategory":"Bridge","pairedWithThisInstance":false}]} 2022-02-16 19:05:34.097 - debug: homekit-controller.0 (115079) Message pairDevice received: {"command":"pairDevice","message":{"deviceId":"BLE-EA:80:43:5F:2E:FE","pin":"843-54-008"},"from":"system.adapter.admin.0","callback":{"message":{"deviceId":"BLE-EA:80:43:5F:2E:FE","pin":"843-54-008"},"id":54,"ack":false,"time":1645034734094},"_id":61965839}) 2022-02-16 19:05:38.076 - info: homekit-controller.0 (115079) Use PairMethod 0 to pair BLE-EA:80:43:5F:2E:FE 2022-02-16 19:05:38.078 - debug: homekit-controller.0 (115079) BLE-EA:80:43:5F:2E:FE Start Homekit Device Client initialization 2022-02-16 19:05:47.900 - debug: homekit-controller.0 (115079) Response to Command pairDevice: {"success":false,"error":"Cannot pair with device BLE-EA:80:43:5F:2E:FE because of error undefined (undefined): undefined"} 2022-02-16 19:05:48.355 - debug: homekit-controller.0 (115079) Discovered BLE device changed: ea:80:43:5f:2e:fe/Eve Degree 5980 2022-02-16 19:05:48.357 - debug: homekit-controller.0 (115079) BLE-EA:80:43:5F:2E:FE Discovered BLE device: {"name":"Eve Degree 5980","CoID":76,"TY":6,"AIL":49,"SF":0,"DeviceID":"ea:80:43:5f:2e:fe","ACID":10,"GSN":2,"CN":3,"CV":2,"c#":3,"id":"ea:80:43:5f:2e:fe","ci":10,"availableToPair":false} 2022-02-16 19:05:48.358 - info: homekit-controller.0 (115079) BLE-EA:80:43:5F:2E:FE (Eve Degree 5980) found without known pairing data and already paired: ignoring 2022-02-16 19:06:32.001 - debug: homekit-controller.0 (115079) Message getDiscoveredDevices received: {"command":"getDiscoveredDevices","message":null,"from":"system.adapter.admin.0","callback":{"message":null,"id":58,"ack":false,"time":1645034791999},"_id":61965843}) 2022-02-16 19:06:32.002 - debug: homekit-controller.0 (115079) Response to Command getDiscoveredDevices: {"success":true,"error":false,"devices":[{"id":"IP-10:92:E9:E7:AE:8F","serviceType":"IP","connected":false,"discovered":true,"availableToPair":false,"discoveredName":"Eve Extend C054","discoveredCategory":"Bridge","pairedWithThisInstance":false},{"id":"BLE-EA:80:43:5F:2E:FE","serviceType":"BLE","connected":false,"discovered":true,"availableToPair":false,"discoveredName":"Eve Degree 5980","discoveredCategory":"Sensor","pairedWithThisInstance":false},{"id":"IP-47:FB:8F:AA:80:82","serviceType":"IP","connected":false,"discovered":true,"availableToPair":false,"discoveredName":"Eve Extend 726E","discoveredCategory":"Bridge","pairedWithThisInstance":false},{"id":"BLE-F6:36:ED:19:09:14","serviceType":"BLE","connected":false,"discovered":true,"availableToPair":false,"discoveredName":"Eve Thermo 8FE8","discoveredCategory":"Thermostat","pairedWithThisInstance":false},{"id":"IP-77:A2:42:96:A1:50","serviceType":"IP","connected":false,"discovered":true,"availableToPair":false,"discoveredName":"ioBroker B13E","discoveredCategory":"Bridge","pairedWithThisInstance":false}]} 2022-02-16 19:06:58.307 - info: homekit-controller.0 (115079) Got terminate signal TERMINATE_YOURSELF 2022-02-16 19:06:58.322 - info: homekit-controller.0 (115079) terminating 2022-02-16 19:06:58.325 - debug: homekit-controller.0 (115079) Plugin sentry destroyed 2022-02-16 19:06:58.326 - info: homekit-controller.0 (115079) Terminated (ADAPTER_REQUESTED_TERMINATION): Without reason 2022-02-16 19:07:04.162 - debug: homekit-controller.0 (115115) Redis Objects: Use Redis connection: 127.0.0.1:9001 2022-02-16 19:07:04.275 - debug: homekit-controller.0 (115115) Objects client ready ... initialize now 2022-02-16 19:07:04.282 - debug: homekit-controller.0 (115115) Objects create System PubSub Client 2022-02-16 19:07:04.286 - debug: homekit-controller.0 (115115) Objects create User PubSub Client 2022-02-16 19:07:04.375 - debug: homekit-controller.0 (115115) Objects client initialize lua scripts 2022-02-16 19:07:04.393 - debug: homekit-controller.0 (115115) Objects connected to redis: 127.0.0.1:9001 2022-02-16 19:07:04.471 - debug: homekit-controller.0 (115115) Redis States: Use Redis connection: 127.0.0.1:6379 2022-02-16 19:07:04.489 - debug: homekit-controller.0 (115115) States create System PubSub Client 2022-02-16 19:07:04.490 - debug: homekit-controller.0 (115115) States create User PubSub Client 2022-02-16 19:07:04.501 - debug: homekit-controller.0 (115115) States connected to redis: 127.0.0.1:6379 2022-02-16 19:07:04.551 - debug: homekit-controller.0 (115115) Plugin sentry Initialize Plugin (enabled=true) 2022-02-16 19:07:05.037 - info: homekit-controller.0 (115115) starting. Version 0.4.3 in /opt/iobroker/node_modules/iobroker.homekit-controller, node: v14.19.0, js-controller: 4.0.10 2022-02-16 19:07:05.299 - debug: homekit-controller.0 (115115) state homekit-controller.0.info.connection changed: false (ack = true) 2022-02-16 19:07:05.311 - debug: homekit-controller.0 (115115) Init 2 known devices without discovery ... 2022-02-16 19:07:05.312 - debug: homekit-controller.0 (115115) Init IP-10:92:E9:E7:AE:8F as known device 2022-02-16 19:07:05.314 - info: homekit-controller.0 (115115) IP-10:92:E9:E7:AE:8F (Eve Extend C054) found without pairing data but available for pairing: Create basic objects 2022-02-16 19:07:05.315 - debug: homekit-controller.0 (115115) Service: {"name":"Eve Extend C054","address":"192.168.95.50","port":8080,"c#":12,"ff":1,"id":"10:92:E9:E7:AE:8F","md":"Eve Extend 20EAB9901","pv":"1.1","s#":1,"sf":1,"ci":2,"availableToPair":true} 2022-02-16 19:07:05.367 - debug: homekit-controller.0 (115115) state homekit-controller.0.IP-10:92:E9:E7:AE:8F.info.connectionType changed: IP (ack = true) 2022-02-16 19:07:05.384 - debug: homekit-controller.0 (115115) state homekit-controller.0.IP-10:92:E9:E7:AE:8F.info.id changed: 10:92:E9:E7:AE:8F (ack = true) 2022-02-16 19:07:05.405 - debug: homekit-controller.0 (115115) state homekit-controller.0.IP-10:92:E9:E7:AE:8F.info.address changed: 192.168.95.50 (ack = true) 2022-02-16 19:07:05.417 - debug: homekit-controller.0 (115115) state homekit-controller.0.IP-10:92:E9:E7:AE:8F.info.connected changed: false (ack = true) 2022-02-16 19:07:05.441 - debug: homekit-controller.0 (115115) state homekit-controller.0.IP-10:92:E9:E7:AE:8F.admin.isPaired changed: false (ack = true) 2022-02-16 19:07:05.456 - debug: homekit-controller.0 (115115) state homekit-controller.0.IP-10:92:E9:E7:AE:8F.info.lastDiscovered changed: 1645034825317 (ack = true) 2022-02-16 19:07:05.485 - debug: homekit-controller.0 (115115) Init BLE-EA:80:43:5F:2E:FE as known device 2022-02-16 19:07:05.486 - info: homekit-controller.0 (115115) BLE-EA:80:43:5F:2E:FE (Eve) found without pairing data but available for pairing: Create basic objects 2022-02-16 19:07:05.487 - debug: homekit-controller.0 (115115) Service: {"name":"Eve","CoID":76,"TY":6,"AIL":49,"SF":1,"DeviceID":"ea:80:43:5f:2e:fe","ACID":10,"GSN":1,"CN":3,"CV":2,"c#":3,"id":"ea:80:43:5f:2e:fe","ci":10,"availableToPair":true} 2022-02-16 19:07:05.527 - debug: homekit-controller.0 (115115) Discovered IP device up: 10:92:E9:E7:AE:8F/Eve Extend C054 2022-02-16 19:07:05.528 - debug: homekit-controller.0 (115115) IP-10:92:E9:E7:AE:8F Discovered IP device: {"name":"Eve Extend C054","address":"192.168.95.50","port":8080,"c#":14,"ff":1,"id":"10:92:E9:E7:AE:8F","md":"Eve Extend 20EAB9901","pv":"1.1","s#":1,"sf":0,"ci":2,"availableToPair":false} 2022-02-16 19:07:05.529 - info: homekit-controller.0 (115115) IP-10:92:E9:E7:AE:8F (Eve Extend C054) found without known pairing data and already paired: ignoring 2022-02-16 19:07:05.547 - debug: homekit-controller.0 (115115) state homekit-controller.0.BLE-EA:80:43:5F:2E:FE.info.connectionType changed: BLE (ack = true) 2022-02-16 19:07:05.553 - debug: homekit-controller.0 (115115) Discovered IP device up: 47:FB:8F:AA:80:82/Eve Extend 726E 2022-02-16 19:07:05.554 - debug: homekit-controller.0 (115115) IP-47:FB:8F:AA:80:82 Discovered IP device: {"name":"Eve Extend 726E","address":"169.254.182.94","port":8080,"c#":5,"ff":1,"id":"47:FB:8F:AA:80:82","md":"Eve Extend 20EAB9901","pv":"1.1","s#":1,"sf":0,"ci":2,"availableToPair":false} 2022-02-16 19:07:05.555 - info: homekit-controller.0 (115115) IP-47:FB:8F:AA:80:82 (Eve Extend 726E) found without known pairing data and already paired: ignoring 2022-02-16 19:07:05.571 - debug: homekit-controller.0 (115115) state homekit-controller.0.BLE-EA:80:43:5F:2E:FE.info.id changed: ea:80:43:5f:2e:fe (ack = true) 2022-02-16 19:07:05.585 - debug: homekit-controller.0 (115115) state homekit-controller.0.BLE-EA:80:43:5F:2E:FE.info.connected changed: false (ack = true) 2022-02-16 19:07:05.606 - debug: homekit-controller.0 (115115) state homekit-controller.0.BLE-EA:80:43:5F:2E:FE.admin.isPaired changed: false (ack = true) 2022-02-16 19:07:05.618 - debug: homekit-controller.0 (115115) state homekit-controller.0.BLE-EA:80:43:5F:2E:FE.info.lastDiscovered changed: 1645034825487 (ack = true) 2022-02-16 19:07:05.750 - debug: homekit-controller.0 (115115) Message getDiscoveredDevices received: {"command":"getDiscoveredDevices","message":null,"from":"system.adapter.admin.0","callback":{"message":null,"id":59,"ack":false,"time":1645034825748},"_id":61965844}) 2022-02-16 19:07:05.752 - debug: homekit-controller.0 (115115) Response to Command getDiscoveredDevices: {"success":true,"error":false,"devices":[{"id":"BLE-EA:80:43:5F:2E:FE","serviceType":"BLE","connected":false,"discovered":true,"availableToPair":true,"discoveredName":"Eve","discoveredCategory":"Sensor","pairedWithThisInstance":false},{"id":"IP-10:92:E9:E7:AE:8F","serviceType":"IP","connected":false,"discovered":true,"availableToPair":false,"discoveredName":"Eve Extend C054","discoveredCategory":"Bridge","pairedWithThisInstance":false},{"id":"IP-47:FB:8F:AA:80:82","serviceType":"IP","connected":false,"discovered":true,"availableToPair":false,"discoveredName":"Eve Extend 726E","discoveredCategory":"Bridge","pairedWithThisInstance":false}]} 2022-02-16 19:07:06.006 - debug: homekit-controller.0 (115115) Discovered IP device up: 77:a2:42:96:a1:50/ioBroker B13E 2022-02-16 19:07:06.007 - debug: homekit-controller.0 (115115) IP-77:A2:42:96:A1:50 Discovered IP device: {"name":"ioBroker B13E","address":"192.168.95.212","port":44763,"c#":21,"ff":0,"id":"77:a2:42:96:a1:50","md":"not configured","pv":"1.1","s#":1,"sf":0,"ci":2,"availableToPair":false} 2022-02-16 19:07:06.008 - info: homekit-controller.0 (115115) IP-77:A2:42:96:A1:50 (ioBroker B13E) found without known pairing data and already paired: ignoring 2022-02-16 19:07:07.862 - debug: homekit-controller.0 (115115) Discovered BLE device up: ea:80:43:5f:2e:fe/Eve Degree 5980 2022-02-16 19:07:07.863 - debug: homekit-controller.0 (115115) BLE-EA:80:43:5F:2E:FE Discovered BLE device: {"name":"Eve Degree 5980","CoID":76,"TY":6,"AIL":49,"SF":0,"DeviceID":"ea:80:43:5f:2e:fe","ACID":10,"GSN":2,"CN":3,"CV":2,"c#":3,"id":"ea:80:43:5f:2e:fe","ci":10,"availableToPair":false} 2022-02-16 19:07:07.864 - info: homekit-controller.0 (115115) BLE-EA:80:43:5F:2E:FE (Eve Degree 5980) found without known pairing data and already paired: ignoring 2022-02-16 19:07:12.512 - debug: homekit-controller.0 (115115) Message identify received: {"command":"identify","message":{"deviceId":"BLE-EA:80:43:5F:2E:FE"},"from":"system.adapter.admin.0","callback":{"message":{"deviceId":"BLE-EA:80:43:5F:2E:FE"},"id":60,"ack":false,"time":1645034832511},"_id":61965845}) 2022-02-16 19:07:12.514 - debug: homekit-controller.0 (115115) Device BLE-EA:80:43:5F:2E:FE: Identify triggered 2022-02-16 19:07:23.539 - debug: homekit-controller.0 (115115) Response to Command identify: {"success":false,"error":"Cannot identify device BLE-EA:80:43:5F:2E:FE because of error undefined: Identify returned error status: 5"} 2022-02-16 19:07:27.848 - debug: homekit-controller.0 (115115) Discovered BLE device up: f6:36:ed:19:09:14/Eve Thermo 8FE8 2022-02-16 19:07:27.849 - debug: homekit-controller.0 (115115) BLE-F6:36:ED:19:09:14 Discovered BLE device: {"name":"Eve Thermo 8FE8","CoID":76,"TY":6,"AIL":49,"SF":0,"DeviceID":"f6:36:ed:19:09:14","ACID":9,"GSN":8861,"CN":5,"CV":2,"c#":5,"id":"f6:36:ed:19:09:14","ci":9,"availableToPair":false} 2022-02-16 19:07:27.850 - info: homekit-controller.0 (115115) BLE-F6:36:ED:19:09:14 (Eve Thermo 8FE8) found without known pairing data and already paired: ignoring 2022-02-16 19:07:27.861 - debug: homekit-controller.0 (115115) Discovered BLE device changed: f6:36:ed:19:09:14/Eve Thermo 8FE8 2022-02-16 19:07:27.862 - debug: homekit-controller.0 (115115) BLE-F6:36:ED:19:09:14 Discovered BLE device: {"name":"Eve Thermo 8FE8","CoID":76,"TY":6,"AIL":49,"SF":0,"DeviceID":"f6:36:ed:19:09:14","ACID":9,"GSN":8862,"CN":5,"CV":2,"c#":5,"id":"f6:36:ed:19:09:14","ci":9,"availableToPair":false} 2022-02-16 19:07:27.862 - info: homekit-controller.0 (115115) BLE-F6:36:ED:19:09:14 (Eve Thermo 8FE8) found without known pairing data and already paired: ignoring 2022-02-16 19:08:47.689 - debug: homekit-controller.0 (115115) Discovered BLE device changed: f6:36:ed:19:09:14/Eve Thermo 8FE8 2022-02-16 19:08:47.691 - debug: homekit-controller.0 (115115) BLE-F6:36:ED:19:09:14 Discovered BLE device: {"name":"Eve Thermo 8FE8","CoID":76,"TY":6,"AIL":49,"SF":0,"DeviceID":"f6:36:ed:19:09:14","ACID":9,"GSN":8863,"CN":5,"CV":2,"c#":5,"id":"f6:36:ed:19:09:14","ci":9,"availableToPair":false} 2022-02-16 19:08:47.692 - info: homekit-controller.0 (115115) BLE-F6:36:ED:19:09:14 (Eve Thermo 8FE8) found without known pairing data and already paired: ignoring 2022-02-16 19:09:35.906 - debug: homekit-controller.0 (115115) Discovered BLE device up: 9b:3d:c6:d0:82:9b/Eve 2022-02-16 19:09:35.907 - debug: homekit-controller.0 (115115) BLE-9B:3D:C6:D0:82:9B Discovered BLE device: {"name":"Eve","CoID":76,"TY":6,"AIL":49,"SF":0,"DeviceID":"9b:3d:c6:d0:82:9b","ACID":9,"GSN":8239,"CN":5,"CV":2,"c#":5,"id":"9b:3d:c6:d0:82:9b","ci":9,"availableToPair":false} 2022-02-16 19:09:35.907 - info: homekit-controller.0 (115115) BLE-9B:3D:C6:D0:82:9B (Eve) found without known pairing data and already paired: ignoring 2022-02-16 19:09:51.356 - debug: homekit-controller.0 (115115) Discovered BLE device up: 91:90:ed:a6:89:85/Eve 2022-02-16 19:09:51.357 - debug: homekit-controller.0 (115115) BLE-91:90:ED:A6:89:85 Discovered BLE device: {"name":"Eve","CoID":76,"TY":6,"AIL":49,"SF":0,"DeviceID":"91:90:ed:a6:89:85","ACID":9,"GSN":6582,"CN":5,"CV":2,"c#":5,"id":"91:90:ed:a6:89:85","ci":9,"availableToPair":false} 2022-02-16 19:09:51.357 - info: homekit-controller.0 (115115) BLE-91:90:ED:A6:89:85 (Eve) found without known pairing data and already paired: ignoring 2022-02-16 19:10:59.889 - debug: homekit-controller.0 (115115) Discovered BLE device changed: ea:80:43:5f:2e:fe/Eve Degree 5980 2022-02-16 19:10:59.891 - debug: homekit-controller.0 (115115) BLE-EA:80:43:5F:2E:FE Discovered BLE device: {"name":"Eve Degree 5980","CoID":76,"TY":6,"AIL":49,"SF":0,"DeviceID":"ea:80:43:5f:2e:fe","ACID":10,"GSN":3,"CN":3,"CV":2,"c#":3,"id":"ea:80:43:5f:2e:fe","ci":10,"availableToPair":false} 2022-02-16 19:10:59.893 - info: homekit-controller.0 (115115) BLE-EA:80:43:5F:2E:FE (Eve Degree 5980) found without known pairing data and already paired: ignoring -
@fortune95 sagte in Test Alpha Homekit-Controller 0.0.x:
2022-02-16 19:07:23.539 - debug: homekit-controller.0 (115115) Response to Command identify: {"success":false,"error":"Cannot identify device BLE-EA:80:43:5F:2E:FE because of error undefined: Identify returned error status: 5"}
Also Fehler 5 sagt laut Specs
Server reached its maximum number of authentication attempts.
Resette mal ...
-
@apollon77
So kurz zum setup, habe jetzt eine VM mit externen USB BLE von Edimax. Debian Bullseye und js-controller 4.0.10.
Den Eve Degree kann ich im adapter sehen (habe ihn zuvor frisch resettet)kann ihn aber nicht identifizieren.
Erhalte dann diese Fehlermeldung:
Danach habe ich den Adapter gestoppt.
Und über die Shell den Debug wie oben erwähnt gestartet.
Hier das Log:iobroker@iobroker:~DEBUG=hap* node /opt/iobroker/node_modules/iobroker.homekit-controller/build/main.js 0 --debugug 2022-02-17 18:44:50.094 - debug: homekit-controller.0 (2380) Redis Objects: Use Redis connection: 127.0.0.1:9001 2022-02-17 18:44:50.129 - debug: homekit-controller.0 (2380) Objects client ready ... initialize now 2022-02-17 18:44:50.130 - debug: homekit-controller.0 (2380) Objects create System PubSub Client 2022-02-17 18:44:50.131 - debug: homekit-controller.0 (2380) Objects create User PubSub Client 2022-02-17 18:44:50.147 - debug: homekit-controller.0 (2380) Objects client initialize lua scripts 2022-02-17 18:44:50.149 - debug: homekit-controller.0 (2380) Objects connected to redis: 127.0.0.1:9001 2022-02-17 18:44:50.162 - debug: homekit-controller.0 (2380) Redis States: Use Redis connection: 127.0.0.1:6379 2022-02-17 18:44:50.164 - debug: homekit-controller.0 (2380) States create System PubSub Client 2022-02-17 18:44:50.165 - debug: homekit-controller.0 (2380) States create User PubSub Client 2022-02-17 18:44:50.168 - debug: homekit-controller.0 (2380) States connected to redis: 127.0.0.1:6379 2022-02-17 18:44:50.182 - debug: homekit-controller.0 (2380) Plugin sentry Initialize Plugin (enabled=true) 2022-02-17 18:44:50.244 - error: homekit-controller.0 (2380) adapter disabled 2022-02-17 18:44:50.299 - info: homekit-controller.0 (2380) starting. Version 0.4.3 in /opt/iobroker/node_modules/iobroker.homekit-controller, node: v14.19.0, js-controller: 4.0.10 2022-02-17 18:44:50.370 - debug: homekit-controller.0 (2380) state homekit-controller.0.info.connection changed: false (ack = true) 2022-02-17 18:44:50.373 - debug: homekit-controller.0 (2380) Init 1 known devices without discovery ... 2022-02-17 18:44:50.373 - debug: homekit-controller.0 (2380) Init BLE-BA:0A:DB:84:F2:CE as known device 2022-02-17 18:44:50.374 - info: homekit-controller.0 (2380) BLE-BA:0A:DB:84:F2:CE (Eve Degree 5980) found without pairing data but available for pairing: Create basic objects 2022-02-17 18:44:50.374 - debug: homekit-controller.0 (2380) Service: {"name":"Eve Degree 5980","CoID":76,"TY":6,"AIL":49,"SF":1,"DeviceID":"ba:0a:db:84:f2:ce","ACID":10,"GSN":1,"CN":3,"CV":2,"c#":3,"id":"ba:0a:db:84:f2:ce","ci":10,"availableToPair":true} 2022-02-17 18:44:50.384 - debug: homekit-controller.0 (2380) state homekit-controller.0.BLE-BA:0A:DB:84:F2:CE.info.connectionType changed: BLE (ack = true) 2022-02-17 18:44:50.388 - debug: homekit-controller.0 (2380) state homekit-controller.0.BLE-BA:0A:DB:84:F2:CE.info.id changed: ba:0a:db:84:f2:ce (ack = true) 2022-02-17 18:44:50.391 - debug: homekit-controller.0 (2380) state homekit-controller.0.BLE-BA:0A:DB:84:F2:CE.info.connected changed: false (ack = true) 2022-02-17 18:44:50.395 - debug: homekit-controller.0 (2380) state homekit-controller.0.BLE-BA:0A:DB:84:F2:CE.admin.isPaired changed: false (ack = true) 2022-02-17 18:44:50.399 - debug: homekit-controller.0 (2380) state homekit-controller.0.BLE-BA:0A:DB:84:F2:CE.info.lastDiscovered changed: 1645119890375 (ack = true) 2022-02-17 18:44:51.467 - debug: homekit-controller.0 (2380) Discovered BLE device up: ba:0a:db:84:f2:ce/Eve Degree 5980 2022-02-17 18:44:51.467 - debug: homekit-controller.0 (2380) BLE-BA:0A:DB:84:F2:CE Discovered BLE device: {"name":"Eve Degree 5980","CoID":76,"TY":6,"AIL":49,"SF":1,"DeviceID":"ba:0a:db:84:f2:ce","ACID":10,"GSN":1,"CN":3,"CV":2,"c#":3,"id":"ba:0a:db:84:f2:ce","ci":10,"availableToPair":true} 2022-02-17 18:44:51.467 - info: homekit-controller.0 (2380) BLE-BA:0A:DB:84:F2:CE (Eve Degree 5980) found without pairing data but available for pairing: Create basic objects 2022-02-17 18:44:51.468 - debug: homekit-controller.0 (2380) Service: {"name":"Eve Degree 5980","CoID":76,"TY":6,"AIL":49,"SF":1,"DeviceID":"ba:0a:db:84:f2:ce","ACID":10,"GSN":1,"CN":3,"CV":2,"c#":3,"id":"ba:0a:db:84:f2:ce","ci":10,"availableToPair":true} 2022-02-17 18:44:51.476 - debug: homekit-controller.0 (2380) state homekit-controller.0.BLE-BA:0A:DB:84:F2:CE.info.connectionType changed: BLE (ack = true) 2022-02-17 18:44:51.479 - debug: homekit-controller.0 (2380) state homekit-controller.0.BLE-BA:0A:DB:84:F2:CE.info.id changed: ba:0a:db:84:f2:ce (ack = true) 2022-02-17 18:44:51.482 - debug: homekit-controller.0 (2380) state homekit-controller.0.BLE-BA:0A:DB:84:F2:CE.info.connected changed: false (ack = true) 2022-02-17 18:44:51.487 - debug: homekit-controller.0 (2380) state homekit-controller.0.BLE-BA:0A:DB:84:F2:CE.admin.isPaired changed: false (ack = true) 2022-02-17 18:44:51.490 - debug: homekit-controller.0 (2380) state homekit-controller.0.BLE-BA:0A:DB:84:F2:CE.info.lastDiscovered changed: 1645119891468 (ack = true) 2022-02-17 18:45:09.680 - debug: homekit-controller.0 (2380) Message getDiscoveredDevices received: {"command":"getDiscoveredDevices","message":null,"from":"system.adapter.admin.0","callback":{"message":null,"id":25,"ack":false,"time":1645119909679},"_id":16181572}) 2022-02-17 18:45:09.680 - debug: homekit-controller.0 (2380) Response to Command getDiscoveredDevices: {"success":true,"error":false,"devices":[{"id":"BLE-BA:0A:DB:84:F2:CE","serviceType":"BLE","connected":false,"discovered":true,"availableToPair":true,"discoveredName":"Eve Degree 5980","discoveredCategory":"Sensor","pairedWithThisInstance":false}]} 2022-02-17 18:45:11.831 - debug: homekit-controller.0 (2380) Message identify received: {"command":"identify","message":{"deviceId":"BLE-BA:0A:DB:84:F2:CE"},"from":"system.adapter.admin.0","callback":{"message":{"deviceId":"BLE-BA:0A:DB:84:F2:CE"},"id":26,"ack":false,"time":1645119911830},"_id":16181573}) 2022-02-17 18:45:11.831 - debug: homekit-controller.0 (2380) Device BLE-BA:0A:DB:84:F2:CE: Identify triggered hap-controller:gatt-connection connect peripheral +0ms hap-controller:gatt-connection disconnect peripheral +3s hap-controller:gatt-connection Peripheral disconnected +47ms 2022-02-17 18:45:14.949 - debug: homekit-controller.0 (2380) Response to Command identify: {"success":false,"error":"Cannot identify device BLE-BA:0A:DB:84:F2:CE because of error undefined: undefined"}Kannst Du damit was anfangen?
-
@apollon77
So habe noch eine Ergänzung nach Google Recherche... im Bluetooth Service vorgenommen.
Zumindest lieferte der Bluetooth Service danach keine Fehler mehr.
Und auch das identifizieren ging dann wieder.Habe diese Zeile so abgeändert
ExecStart=/usr/lib/bluetooth/bluetoothd --noplugin=sapNur das pairen will einfach nicht.
Hier das Log:iobroker@iobroker:~$ sudo systemctl status bluetooth.service ● bluetooth.service - Bluetooth service Loaded: loaded (/lib/systemd/system/bluetooth.service; enabled; vendor preset: enabled) Active: active (running) since Thu 2022-02-17 18:58:26 CET; 13s ago Docs: man:bluetoothd(8) Main PID: 2443 (bluetoothd) Status: "Running" Tasks: 1 (limit: 7090) Memory: 740.0K CPU: 9ms CGroup: /system.slice/bluetooth.service └─2443 /usr/libexec/bluetooth/bluetoothd --noplugin=sap Feb 17 18:58:26 iobroker systemd[1]: Starting Bluetooth service... Feb 17 18:58:26 iobroker bluetoothd[2443]: Bluetooth daemon 5.55 Feb 17 18:58:26 iobroker systemd[1]: Started Bluetooth service. Feb 17 18:58:26 iobroker bluetoothd[2443]: Starting SDP server Feb 17 18:58:26 iobroker bluetoothd[2443]: Excluding (cli) sap Feb 17 18:58:26 iobroker bluetoothd[2443]: Bluetooth management interface 1.18 initialized iobroker@iobroker:~$ DEBUG=hap* node /opt/iobroker/node_modules/iobroker.homekit-controller/build/main.js 0 --debug 2022-02-17 19:00:01.818 - debug: homekit-controller.0 (2501) Redis Objects: Use Redis connection: 127.0.0.1:9001 2022-02-17 19:00:01.856 - debug: homekit-controller.0 (2501) Objects client ready ... initialize now 2022-02-17 19:00:01.857 - debug: homekit-controller.0 (2501) Objects create System PubSub Client 2022-02-17 19:00:01.858 - debug: homekit-controller.0 (2501) Objects create User PubSub Client 2022-02-17 19:00:01.879 - debug: homekit-controller.0 (2501) Objects client initialize lua scripts 2022-02-17 19:00:01.881 - debug: homekit-controller.0 (2501) Objects connected to redis: 127.0.0.1:9001 2022-02-17 19:00:01.896 - debug: homekit-controller.0 (2501) Redis States: Use Redis connection: 127.0.0.1:6379 2022-02-17 19:00:01.898 - debug: homekit-controller.0 (2501) States create System PubSub Client 2022-02-17 19:00:01.899 - debug: homekit-controller.0 (2501) States create User PubSub Client 2022-02-17 19:00:01.901 - debug: homekit-controller.0 (2501) States connected to redis: 127.0.0.1:6379 2022-02-17 19:00:01.917 - debug: homekit-controller.0 (2501) Plugin sentry Initialize Plugin (enabled=true) 2022-02-17 19:00:01.992 - error: homekit-controller.0 (2501) adapter disabled 2022-02-17 19:00:02.039 - info: homekit-controller.0 (2501) starting. Version 0.4.3 in /opt/iobroker/node_modules/iobroker.homekit-controller, node: v14.19.0, js-controller: 4.0.10 2022-02-17 19:00:02.112 - debug: homekit-controller.0 (2501) state homekit-controller.0.info.connection changed: false (ack = true) 2022-02-17 19:00:02.114 - debug: homekit-controller.0 (2501) Init 1 known devices without discovery ... 2022-02-17 19:00:02.115 - debug: homekit-controller.0 (2501) Init BLE-BA:0A:DB:84:F2:CE as known device 2022-02-17 19:00:02.116 - info: homekit-controller.0 (2501) BLE-BA:0A:DB:84:F2:CE (Eve Degree 5980) found without pairing data but available for pairing: Create basic objects 2022-02-17 19:00:02.116 - debug: homekit-controller.0 (2501) Service: {"name":"Eve Degree 5980","CoID":76,"TY":6,"AIL":49,"SF":1,"DeviceID":"ba:0a:db:84:f2:ce","ACID":10,"GSN":2,"CN":3,"CV":2,"c#":3,"id":"ba:0a:db:84:f2:ce","ci":10,"availableToPair":true} 2022-02-17 19:00:02.128 - debug: homekit-controller.0 (2501) state homekit-controller.0.BLE-BA:0A:DB:84:F2:CE.info.connectionType changed: BLE (ack = true) 2022-02-17 19:00:02.134 - debug: homekit-controller.0 (2501) state homekit-controller.0.BLE-BA:0A:DB:84:F2:CE.info.id changed: ba:0a:db:84:f2:ce (ack = true) 2022-02-17 19:00:02.138 - debug: homekit-controller.0 (2501) state homekit-controller.0.BLE-BA:0A:DB:84:F2:CE.info.connected changed: false (ack = true) 2022-02-17 19:00:02.145 - debug: homekit-controller.0 (2501) state homekit-controller.0.BLE-BA:0A:DB:84:F2:CE.admin.isPaired changed: false (ack = true) 2022-02-17 19:00:02.149 - debug: homekit-controller.0 (2501) state homekit-controller.0.BLE-BA:0A:DB:84:F2:CE.info.lastDiscovered changed: 1645120802117 (ack = true) 2022-02-17 19:00:02.689 - debug: homekit-controller.0 (2501) Discovered BLE device up: ba:0a:db:84:f2:ce/Eve Degree 5980 2022-02-17 19:00:02.689 - debug: homekit-controller.0 (2501) BLE-BA:0A:DB:84:F2:CE Discovered BLE device: {"name":"Eve Degree 5980","CoID":76,"TY":6,"AIL":49,"SF":1,"DeviceID":"ba:0a:db:84:f2:ce","ACID":10,"GSN":2,"CN":3,"CV":2,"c#":3,"id":"ba:0a:db:84:f2:ce","ci":10,"availableToPair":true} 2022-02-17 19:00:02.690 - info: homekit-controller.0 (2501) BLE-BA:0A:DB:84:F2:CE (Eve Degree 5980) found without pairing data but available for pairing: Create basic objects 2022-02-17 19:00:02.690 - debug: homekit-controller.0 (2501) Service: {"name":"Eve Degree 5980","CoID":76,"TY":6,"AIL":49,"SF":1,"DeviceID":"ba:0a:db:84:f2:ce","ACID":10,"GSN":2,"CN":3,"CV":2,"c#":3,"id":"ba:0a:db:84:f2:ce","ci":10,"availableToPair":true} 2022-02-17 19:00:02.698 - debug: homekit-controller.0 (2501) state homekit-controller.0.BLE-BA:0A:DB:84:F2:CE.info.connectionType changed: BLE (ack = true) 2022-02-17 19:00:02.701 - debug: homekit-controller.0 (2501) state homekit-controller.0.BLE-BA:0A:DB:84:F2:CE.info.id changed: ba:0a:db:84:f2:ce (ack = true) 2022-02-17 19:00:02.705 - debug: homekit-controller.0 (2501) state homekit-controller.0.BLE-BA:0A:DB:84:F2:CE.info.connected changed: false (ack = true) 2022-02-17 19:00:02.710 - debug: homekit-controller.0 (2501) state homekit-controller.0.BLE-BA:0A:DB:84:F2:CE.admin.isPaired changed: false (ack = true) 2022-02-17 19:00:02.714 - debug: homekit-controller.0 (2501) state homekit-controller.0.BLE-BA:0A:DB:84:F2:CE.info.lastDiscovered changed: 1645120802690 (ack = true) 2022-02-17 19:00:07.994 - debug: homekit-controller.0 (2501) Message getDiscoveredDevices received: {"command":"getDiscoveredDevices","message":null,"from":"system.adapter.admin.0","callback":{"message":null,"id":33,"ack":false,"time":1645120807993},"_id":16181580}) 2022-02-17 19:00:07.994 - debug: homekit-controller.0 (2501) Response to Command getDiscoveredDevices: {"success":true,"error":false,"devices":[{"id":"BLE-BA:0A:DB:84:F2:CE","serviceType":"BLE","connected":false,"discovered":true,"availableToPair":true,"discoveredName":"Eve Degree 5980","discoveredCategory":"Sensor","pairedWithThisInstance":false}]} 2022-02-17 19:00:09.643 - debug: homekit-controller.0 (2501) Message identify received: {"command":"identify","message":{"deviceId":"BLE-BA:0A:DB:84:F2:CE"},"from":"system.adapter.admin.0","callback":{"message":{"deviceId":"BLE-BA:0A:DB:84:F2:CE"},"id":34,"ack":false,"time":1645120809642},"_id":16181581}) 2022-02-17 19:00:09.643 - debug: homekit-controller.0 (2501) Device BLE-BA:0A:DB:84:F2:CE: Identify triggered hap-controller:gatt-connection connect peripheral +0ms hap-controller:tlv Add 1 bytes for tag 1: 01 +0ms hap-controller:gatt-connection ff4feaecc339/ff:4f:ea:ec:c3:39 Write for characteristic 000000140000100080000026bb765291 00020003000300010101 +4s hap-controller:gatt-connection ff4feaecc339/ff:4f:ea:ec:c3:39 Received data for characteristic 000000140000100080000026bb765291 020000 +224ms hap-controller:gatt-connection disconnect peripheral +1ms hap-controller:gatt-connection Peripheral disconnected +45ms 2022-02-17 19:00:13.890 - debug: homekit-controller.0 (2501) Response to Command identify: {"success":true,"error":false} 2022-02-17 19:00:15.413 - debug: homekit-controller.0 (2501) Message getDiscoveredDevices received: {"command":"getDiscoveredDevices","message":null,"from":"system.adapter.admin.0","callback":{"message":null,"id":35,"ack":false,"time":1645120815413},"_id":16181582}) 2022-02-17 19:00:15.414 - debug: homekit-controller.0 (2501) Response to Command getDiscoveredDevices: {"success":true,"error":false,"devices":[{"id":"BLE-BA:0A:DB:84:F2:CE","serviceType":"BLE","connected":false,"discovered":true,"availableToPair":true,"discoveredName":"Eve Degree 5980","discoveredCategory":"Sensor","pairedWithThisInstance":false}]} 2022-02-17 19:00:25.994 - debug: homekit-controller.0 (2501) Message identify received: {"command":"identify","message":{"deviceId":"BLE-BA:0A:DB:84:F2:CE"},"from":"system.adapter.admin.0","callback":{"message":{"deviceId":"BLE-BA:0A:DB:84:F2:CE"},"id":36,"ack":false,"time":1645120825994},"_id":16181583}) 2022-02-17 19:00:25.995 - debug: homekit-controller.0 (2501) Device BLE-BA:0A:DB:84:F2:CE: Identify triggered hap-controller:gatt-connection connect peripheral +12s hap-controller:gatt-connection disconnect peripheral +5s 2022-02-17 19:01:00.829 - debug: homekit-controller.0 (2501) Response to Command identify: {"success":false,"error":"Cannot identify device BLE-BA:0A:DB:84:F2:CE because of error undefined: Unknown Connection Identifier (0x2)"} ^Ciobroker@iobroker:~$ DEBUG=hap* node /opt/iobroker/node_modules/iobroker.homekit-controller/build/main.js 0 --debug 2022-02-17 19:01:16.958 - debug: homekit-controller.0 (2526) Redis Objects: Use Redis connection: 127.0.0.1:9001 2022-02-17 19:01:16.994 - debug: homekit-controller.0 (2526) Objects client ready ... initialize now 2022-02-17 19:01:16.995 - debug: homekit-controller.0 (2526) Objects create System PubSub Client 2022-02-17 19:01:16.996 - debug: homekit-controller.0 (2526) Objects create User PubSub Client 2022-02-17 19:01:17.016 - debug: homekit-controller.0 (2526) Objects client initialize lua scripts 2022-02-17 19:01:17.018 - debug: homekit-controller.0 (2526) Objects connected to redis: 127.0.0.1:9001 2022-02-17 19:01:17.031 - debug: homekit-controller.0 (2526) Redis States: Use Redis connection: 127.0.0.1:6379 2022-02-17 19:01:17.033 - debug: homekit-controller.0 (2526) States create System PubSub Client 2022-02-17 19:01:17.034 - debug: homekit-controller.0 (2526) States create User PubSub Client 2022-02-17 19:01:17.036 - debug: homekit-controller.0 (2526) States connected to redis: 127.0.0.1:6379 2022-02-17 19:01:17.049 - debug: homekit-controller.0 (2526) Plugin sentry Initialize Plugin (enabled=true) 2022-02-17 19:01:17.110 - error: homekit-controller.0 (2526) adapter disabled 2022-02-17 19:01:17.159 - info: homekit-controller.0 (2526) starting. Version 0.4.3 in /opt/iobroker/node_modules/iobroker.homekit-controller, node: v14.19.0, js-controller: 4.0.10 2022-02-17 19:01:17.232 - debug: homekit-controller.0 (2526) state homekit-controller.0.info.connection changed: false (ack = true) 2022-02-17 19:01:17.235 - debug: homekit-controller.0 (2526) Init 1 known devices without discovery ... 2022-02-17 19:01:17.236 - debug: homekit-controller.0 (2526) Init BLE-BA:0A:DB:84:F2:CE as known device 2022-02-17 19:01:17.237 - info: homekit-controller.0 (2526) BLE-BA:0A:DB:84:F2:CE (Eve Degree 5980) found without pairing data but available for pairing: Create basic objects 2022-02-17 19:01:17.238 - debug: homekit-controller.0 (2526) Service: {"name":"Eve Degree 5980","CoID":76,"TY":6,"AIL":49,"SF":1,"DeviceID":"ba:0a:db:84:f2:ce","ACID":10,"GSN":2,"CN":3,"CV":2,"c#":3,"id":"ba:0a:db:84:f2:ce","ci":10,"availableToPair":true} 2022-02-17 19:01:17.248 - debug: homekit-controller.0 (2526) state homekit-controller.0.BLE-BA:0A:DB:84:F2:CE.info.connectionType changed: BLE (ack = true) 2022-02-17 19:01:17.252 - debug: homekit-controller.0 (2526) state homekit-controller.0.BLE-BA:0A:DB:84:F2:CE.info.id changed: ba:0a:db:84:f2:ce (ack = true) 2022-02-17 19:01:17.255 - debug: homekit-controller.0 (2526) state homekit-controller.0.BLE-BA:0A:DB:84:F2:CE.info.connected changed: false (ack = true) 2022-02-17 19:01:17.259 - debug: homekit-controller.0 (2526) state homekit-controller.0.BLE-BA:0A:DB:84:F2:CE.admin.isPaired changed: false (ack = true) 2022-02-17 19:01:17.262 - debug: homekit-controller.0 (2526) state homekit-controller.0.BLE-BA:0A:DB:84:F2:CE.info.lastDiscovered changed: 1645120877239 (ack = true) 2022-02-17 19:01:20.744 - debug: homekit-controller.0 (2526) Discovered BLE device up: ba:0a:db:84:f2:ce/Eve Degree 5980 2022-02-17 19:01:20.745 - debug: homekit-controller.0 (2526) BLE-BA:0A:DB:84:F2:CE Discovered BLE device: {"name":"Eve Degree 5980","CoID":76,"TY":6,"AIL":49,"SF":1,"DeviceID":"ba:0a:db:84:f2:ce","ACID":10,"GSN":2,"CN":3,"CV":2,"c#":3,"id":"ba:0a:db:84:f2:ce","ci":10,"availableToPair":true} 2022-02-17 19:01:20.745 - info: homekit-controller.0 (2526) BLE-BA:0A:DB:84:F2:CE (Eve Degree 5980) found without pairing data but available for pairing: Create basic objects 2022-02-17 19:01:20.745 - debug: homekit-controller.0 (2526) Service: {"name":"Eve Degree 5980","CoID":76,"TY":6,"AIL":49,"SF":1,"DeviceID":"ba:0a:db:84:f2:ce","ACID":10,"GSN":2,"CN":3,"CV":2,"c#":3,"id":"ba:0a:db:84:f2:ce","ci":10,"availableToPair":true} 2022-02-17 19:01:20.752 - debug: homekit-controller.0 (2526) state homekit-controller.0.BLE-BA:0A:DB:84:F2:CE.info.connectionType changed: BLE (ack = true) 2022-02-17 19:01:20.755 - debug: homekit-controller.0 (2526) state homekit-controller.0.BLE-BA:0A:DB:84:F2:CE.info.id changed: ba:0a:db:84:f2:ce (ack = true) 2022-02-17 19:01:20.759 - debug: homekit-controller.0 (2526) state homekit-controller.0.BLE-BA:0A:DB:84:F2:CE.info.connected changed: false (ack = true) 2022-02-17 19:01:20.766 - debug: homekit-controller.0 (2526) state homekit-controller.0.BLE-BA:0A:DB:84:F2:CE.admin.isPaired changed: false (ack = true) 2022-02-17 19:01:20.769 - debug: homekit-controller.0 (2526) state homekit-controller.0.BLE-BA:0A:DB:84:F2:CE.info.lastDiscovered changed: 1645120880745 (ack = true) 2022-02-17 19:01:25.279 - debug: homekit-controller.0 (2526) Message getDiscoveredDevices received: {"command":"getDiscoveredDevices","message":null,"from":"system.adapter.admin.0","callback":{"message":null,"id":37,"ack":false,"time":1645120885278},"_id":16181584}) 2022-02-17 19:01:25.280 - debug: homekit-controller.0 (2526) Response to Command getDiscoveredDevices: {"success":true,"error":false,"devices":[{"id":"BLE-BA:0A:DB:84:F2:CE","serviceType":"BLE","connected":false,"discovered":true,"availableToPair":true,"discoveredName":"Eve Degree 5980","discoveredCategory":"Sensor","pairedWithThisInstance":false}]} 2022-02-17 19:01:26.989 - debug: homekit-controller.0 (2526) Message identify received: {"command":"identify","message":{"deviceId":"BLE-BA:0A:DB:84:F2:CE"},"from":"system.adapter.admin.0","callback":{"message":{"deviceId":"BLE-BA:0A:DB:84:F2:CE"},"id":38,"ack":false,"time":1645120886988},"_id":16181585}) 2022-02-17 19:01:26.990 - debug: homekit-controller.0 (2526) Device BLE-BA:0A:DB:84:F2:CE: Identify triggered hap-controller:gatt-connection connect peripheral +0ms hap-controller:tlv Add 1 bytes for tag 1: 01 +0ms hap-controller:gatt-connection ff4feaecc339/ff:4f:ea:ec:c3:39 Write for characteristic 000000140000100080000026bb765291 00020003000300010101 +3s hap-controller:gatt-connection ff4feaecc339/ff:4f:ea:ec:c3:39 Received data for characteristic 000000140000100080000026bb765291 020000 +225ms hap-controller:gatt-connection disconnect peripheral +0ms hap-controller:gatt-connection Peripheral disconnected +45ms 2022-02-17 19:01:30.649 - debug: homekit-controller.0 (2526) Response to Command identify: {"success":true,"error":false} 2022-02-17 19:01:32.166 - debug: homekit-controller.0 (2526) Message getDiscoveredDevices received: {"command":"getDiscoveredDevices","message":null,"from":"system.adapter.admin.0","callback":{"message":null,"id":39,"ack":false,"time":1645120892163},"_id":16181586}) 2022-02-17 19:01:32.167 - debug: homekit-controller.0 (2526) Response to Command getDiscoveredDevices: {"success":true,"error":false,"devices":[{"id":"BLE-BA:0A:DB:84:F2:CE","serviceType":"BLE","connected":false,"discovered":true,"availableToPair":true,"discoveredName":"Eve Degree 5980","discoveredCategory":"Sensor","pairedWithThisInstance":false}]} 2022-02-17 19:01:51.108 - debug: homekit-controller.0 (2526) Message pairDevice received: {"command":"pairDevice","message":{"deviceId":"BLE-BA:0A:DB:84:F2:CE","pin":"843-54-008"},"from":"system.adapter.admin.0","callback":{"message":{"deviceId":"BLE-BA:0A:DB:84:F2:CE","pin":"843-54-008"},"id":40,"ack":false,"time":1645120911107},"_id":16181587}) hap-controller:gatt-connection connect peripheral +20s hap-controller:gatt-connection disconnect peripheral +7s 2022-02-17 19:02:27.867 - info: homekit-controller.0 (2526) Cannot retrieve BLE PairMethod for device BLE-BA:0A:DB:84:F2:CE because of error undefined: Unknown Connection Identifier (0x2), try default 2022-02-17 19:02:27.868 - info: homekit-controller.0 (2526) Use PairMethod 0 to pair BLE-BA:0A:DB:84:F2:CE 2022-02-17 19:02:27.868 - debug: homekit-controller.0 (2526) BLE-BA:0A:DB:84:F2:CE Start Homekit Device Client initialization hap-controller:gatt-connection disconnect peripheral to reconnect +30s 2022-02-17 19:02:57.870 - debug: homekit-controller.0 (2526) Response to Command pairDevice: {"success":false,"error":"Cannot pair with device BLE-BA:0A:DB:84:F2:CE because of error undefined (undefined): undefined"} -
Interessant, den Fehler hatte ich in einem Issue schonmal gesehen, aber tja dann wirds ganz interessant. Bitte schaumal da durch https://github.com/Apollon77/ioBroker.homekit-controller/#for-ble-devices und versuche es blt mach dieses Log parallel
-
@apollon77
Habe den Adapter wie im Issue beschrieben von Gihub installiert und das Log erstellt:iobroker@iobroker:~$ DEBUG=hap* node /opt/iobroker/node_modules/iobroker.homekit-controller/build/main.js 0 --debug --logs 2022-02-18 16:07:47.793 - debug: homekit-controller.0 (6682) Redis Objects: Use Redis connection: 127.0.0.1:9001 2022-02-18 16:07:47.815 - debug: homekit-controller.0 (6682) Objects client ready ... initialize now 2022-02-18 16:07:47.816 - debug: homekit-controller.0 (6682) Objects create System PubSub Client 2022-02-18 16:07:47.817 - debug: homekit-controller.0 (6682) Objects create User PubSub Client 2022-02-18 16:07:47.838 - debug: homekit-controller.0 (6682) Objects client initialize lua scripts 2022-02-18 16:07:47.840 - debug: homekit-controller.0 (6682) Objects connected to redis: 127.0.0.1:9001 2022-02-18 16:07:47.854 - debug: homekit-controller.0 (6682) Redis States: Use Redis connection: 127.0.0.1:6379 2022-02-18 16:07:47.856 - debug: homekit-controller.0 (6682) States create System PubSub Client 2022-02-18 16:07:47.857 - debug: homekit-controller.0 (6682) States create User PubSub Client 2022-02-18 16:07:47.860 - debug: homekit-controller.0 (6682) States connected to redis: 127.0.0.1:6379 2022-02-18 16:07:47.872 - debug: homekit-controller.0 (6682) Plugin sentry Initialize Plugin (enabled=true) 2022-02-18 16:07:47.933 - error: homekit-controller.0 (6682) adapter disabled 2022-02-18 16:07:47.978 - info: homekit-controller.0 (6682) starting. Version 0.4.3 (non-npm: Apollon77/ioBroker.homekit-controller#c614463e84bfe9c4e7d5d6038d0babdbcb55b852) in /opt/iobroker/node_modules/iobroker.homekit-controller, node: v14.19.0, js-controller: 4.0.12 2022-02-18 16:07:48.050 - debug: homekit-controller.0 (6682) state homekit-controller.0.info.connection changed: false (ack = true) 2022-02-18 16:07:53.221 - debug: homekit-controller.0 (6682) Discovered BLE device up: 25:3e:f0:cc:4c:64/Eve 2022-02-18 16:07:53.221 - debug: homekit-controller.0 (6682) BLE-25:3E:F0:CC:4C:64 Discovered BLE device: {"name":"Eve","CoID":76,"TY":6,"AIL":49,"SF":1,"DeviceID":"25:3e:f0:cc:4c:64","ACID":10,"GSN":1,"CN":3,"CV":2,"c#":3,"id":"25:3e:f0:cc:4c:64","ci":10,"availableToPair":true} 2022-02-18 16:07:53.222 - info: homekit-controller.0 (6682) BLE-25:3E:F0:CC:4C:64 (Eve) found without pairing data but available for pairing: Create basic objects 2022-02-18 16:07:53.222 - debug: homekit-controller.0 (6682) Service: {"name":"Eve","CoID":76,"TY":6,"AIL":49,"SF":1,"DeviceID":"25:3e:f0:cc:4c:64","ACID":10,"GSN":1,"CN":3,"CV":2,"c#":3,"id":"25:3e:f0:cc:4c:64","ci":10,"availableToPair":true} 2022-02-18 16:07:53.235 - debug: homekit-controller.0 (6682) state homekit-controller.0.BLE-25:3E:F0:CC:4C:64.info.connectionType changed: BLE (ack = true) 2022-02-18 16:07:53.237 - debug: homekit-controller.0 (6682) state homekit-controller.0.BLE-25:3E:F0:CC:4C:64.info.connectionType changed: BLE (ack = true) 2022-02-18 16:07:53.240 - debug: homekit-controller.0 (6682) state homekit-controller.0.BLE-25:3E:F0:CC:4C:64.info.id changed: 25:3e:f0:cc:4c:64 (ack = true) 2022-02-18 16:07:53.243 - debug: homekit-controller.0 (6682) state homekit-controller.0.BLE-25:3E:F0:CC:4C:64.info.connected changed: false (ack = true) 2022-02-18 16:07:53.248 - debug: homekit-controller.0 (6682) state homekit-controller.0.BLE-25:3E:F0:CC:4C:64.admin.isPaired changed: false (ack = true) 2022-02-18 16:07:53.251 - debug: homekit-controller.0 (6682) state homekit-controller.0.BLE-25:3E:F0:CC:4C:64.info.lastDiscovered changed: 1645196873223 (ack = true) 2022-02-18 16:07:53.255 - debug: homekit-controller.0 (6682) state homekit-controller.0.BLE-25:3E:F0:CC:4C:64.admin.pairWithPin changed: (ack = true) 2022-02-18 16:07:53.258 - debug: homekit-controller.0 (6682) state homekit-controller.0.BLE-25:3E:F0:CC:4C:64.admin.identify changed: false (ack = true) 2022-02-18 16:08:10.833 - debug: homekit-controller.0 (6682) Message getDiscoveredDevices received: {"command":"getDiscoveredDevices","message":null,"from":"system.adapter.admin.0","callback":{"message":null,"id":112,"ack":false,"time":1645196890832},"_id":85128405}) 2022-02-18 16:08:10.833 - debug: homekit-controller.0 (6682) Response to Command getDiscoveredDevices: {"success":true,"error":false,"devices":[{"id":"BLE-25:3E:F0:CC:4C:64","serviceType":"BLE","connected":false,"discovered":true,"availableToPair":true,"discoveredName":"Eve","discoveredCategory":"Sensor","pairedWithThisInstance":false}]} 2022-02-18 16:08:12.873 - debug: homekit-controller.0 (6682) Message identify received: {"command":"identify","message":{"deviceId":"BLE-25:3E:F0:CC:4C:64"},"from":"system.adapter.admin.0","callback":{"message":{"deviceId":"BLE-25:3E:F0:CC:4C:64"},"id":113,"ack":false,"time":1645196892872},"_id":85128406}) 2022-02-18 16:08:12.873 - debug: homekit-controller.0 (6682) Device BLE-25:3E:F0:CC:4C:64: Identify triggered hap-controller:gatt-connection connect peripheral +0ms hap-controller:tlv Add 1 bytes for tag 1: 01 +0ms hap-controller:gatt-connection e60614286935/e6:06:14:28:69:35 Write for characteristic 000000140000100080000026bb765291 00020003000300010101 +6s hap-controller:gatt-connection e60614286935/e6:06:14:28:69:35 Received data for characteristic 000000140000100080000026bb765291 020000 +180ms hap-controller:gatt-connection disconnect peripheral +0ms hap-controller:gatt-connection Peripheral disconnected +45ms 2022-02-18 16:08:18.600 - debug: homekit-controller.0 (6682) Response to Command identify: {"success":true,"error":false} 2022-02-18 16:08:20.110 - debug: homekit-controller.0 (6682) Message getDiscoveredDevices received: {"command":"getDiscoveredDevices","message":null,"from":"system.adapter.admin.0","callback":{"message":null,"id":114,"ack":false,"time":1645196900109},"_id":85128407}) 2022-02-18 16:08:20.110 - debug: homekit-controller.0 (6682) Response to Command getDiscoveredDevices: {"success":true,"error":false,"devices":[{"id":"BLE-25:3E:F0:CC:4C:64","serviceType":"BLE","connected":false,"discovered":true,"availableToPair":true,"discoveredName":"Eve","discoveredCategory":"Sensor","pairedWithThisInstance":false}]} 2022-02-18 16:08:46.277 - debug: homekit-controller.0 (6682) Message pairDevice received: {"command":"pairDevice","message":{"deviceId":"BLE-25:3E:F0:CC:4C:64","pin":"843-54-008"},"from":"system.adapter.admin.0","callback":{"message":{"deviceId":"BLE-25:3E:F0:CC:4C:64","pin":"843-54-008"},"id":115,"ack":false,"time":1645196926277},"_id":85128408}) hap-controller:gatt-connection connect peripheral +28s hap-controller:gatt-connection e60614286935/e6:06:14:28:69:35 Write for characteristic 0000004f0000100080000026bb765291 0003000f00 +4s hap-controller:gatt-connection e60614286935/e6:06:14:28:69:35 Received data for characteristic 0000004f0000100080000026bb765291 0200000300010101 +225ms hap-controller:gatt-connection disconnect peripheral +0ms hap-controller:gatt-connection Peripheral disconnected +46ms 2022-02-18 16:08:50.462 - info: homekit-controller.0 (6682) Use PairMethod 0 to pair BLE-25:3E:F0:CC:4C:64 2022-02-18 16:08:50.463 - debug: homekit-controller.0 (6682) BLE-25:3E:F0:CC:4C:64 Start Homekit Device Client initialization hap-controller:gatt-connection connect peripheral +2ms 2022-02-18 16:08:55.788 - debug: homekit-controller.0 (6682) Response to Command pairDevice: {"success":false,"error":"Cannot pair with device BLE-25:3E:F0:CC:4C:64 because of error undefined (undefined): Unknown Connection Identifier (0x2)"} 2022-02-18 16:11:45.843 - debug: homekit-controller.0 (6682) Discovered BLE device changed: 25:3e:f0:cc:4c:64/Eve Degree 5980 2022-02-18 16:11:45.843 - debug: homekit-controller.0 (6682) BLE-25:3E:F0:CC:4C:64 Discovered BLE device: {"name":"Eve Degree 5980","CoID":76,"TY":6,"AIL":49,"SF":1,"DeviceID":"25:3e:f0:cc:4c:64","ACID":10,"GSN":2,"CN":3,"CV":2,"c#":3,"id":"25:3e:f0:cc:4c:64","ci":10,"availableToPair":true} 2022-02-18 16:11:45.843 - info: homekit-controller.0 (6682) BLE-25:3E:F0:CC:4C:64 (Eve Degree 5980) found without pairing data but available for pairing: Create basic objects 2022-02-18 16:11:45.844 - debug: homekit-controller.0 (6682) Service: {"name":"Eve Degree 5980","CoID":76,"TY":6,"AIL":49,"SF":1,"DeviceID":"25:3e:f0:cc:4c:64","ACID":10,"GSN":2,"CN":3,"CV":2,"c#":3,"id":"25:3e:f0:cc:4c:64","ci":10,"availableToPair":true} 2022-02-18 16:11:45.852 - debug: homekit-controller.0 (6682) state homekit-controller.0.BLE-25:3E:F0:CC:4C:64.info.connectionType changed: BLE (ack = true) 2022-02-18 16:11:45.854 - debug: homekit-controller.0 (6682) state homekit-controller.0.BLE-25:3E:F0:CC:4C:64.info.id changed: 25:3e:f0:cc:4c:64 (ack = true) 2022-02-18 16:11:45.858 - debug: homekit-controller.0 (6682) state homekit-controller.0.BLE-25:3E:F0:CC:4C:64.info.connected changed: false (ack = true) 2022-02-18 16:11:45.863 - debug: homekit-controller.0 (6682) state homekit-controller.0.BLE-25:3E:F0:CC:4C:64.admin.isPaired changed: false (ack = true) 2022-02-18 16:11:45.866 - debug: homekit-controller.0 (6682) state homekit-controller.0.BLE-25:3E:F0:CC:4C:64.info.lastDiscovered changed: 1645197105844 (ack = true) -
@fortune95 Hi,
sorry für die späte Antwort ... Kannst Du es nochmal machen und das zweite log mit dem hcitool auch parallel holen? Das ist denke ich dann interessant in Kombi
