iobroker restore 0 funktioniert nicht

funkytown

@thomas-braun
Bin noch nicht dazu gekommen den PI flott zu machen.
Das gute daran ist, dass ich/wir jetzt erkennen, dass wir im Haus nicht vom ioBroker abhängig sind. Wir senden meistens (Status)Informationen in Wort und Bild hin und her. Das was wir über Sprachsteuerung im Haus darüber schalten, kann auch alles manuell geschaltet werden Gute Erkenntnis!

funkytown

@thomas-braun
mein RPi läuft wieder. Durch den reboot wurde eine falsche UUID in der cmdline.txt eingetragen.

Leider ist der ioBroker immer noch nicht da!

Thomas Braun

@funkytown

Leider kann man da ohne Meldungen immer noch nichts zu sagen.

Welche UUID war es denn? Die werden ja nicht gewürfelt...

funkytown

@thomas-braun
also jetzt blicke ich da garnicht mehr durch. Ich bin jetzt an via ssh an dem betroffenen System angemeldet und die cmdline.txt und fstab schaut jetzt so aus. Wo ist mein Eintrag geblieben. Mir scheint als ob ich in einer anderen Baumstruktur also einem anderen /etc/boot bin.

markus@rpi:/boot $ cat cmdline.txt
dwc_otg.lpm_enable=0 console=serial0,115200 console=tty1 root=/dev/sdb1 rootfstype=ext4 elevator=deadline fsck.repair=yes rootwait nosplash plymouth.ignore-serial-consoles

markus@rpi:/boot $ cat /etc/fstab
proc            /proc           proc    defaults          0       0
PARTUUID=02211fe5-01  /boot           vfat    defaults,flush    0       2
#PARTUUID=924c1207-02  /               ext4    defaults,noatime  0       1
# a swapfile is not a swap partition, no line here
#   use  dphys-swapfile swap[on|off]  for that
/dev/sdb1       /               ext4    defaults,noatime  0       1
/dev/sdb2       swap            swap    defaults          0       0

Ich bin jetzt mal für 3 Std. weg.

Thomas Braun

@funkytown sagte in iobroker restore 0 funktioniert nicht:

root=/dev/sdb1

Keine Ahnung was du da wie warum treibst, jedenfalls ist der Eintrag
root=/dev/sdb1
absolut atypisch. Vor allendingen sdb1
Für gewöhnlich wird da die UUID aus

blkid

eingetragen.

funkytown

@thomas-braun
Das System läuft ja wieder nach dem full-upgrade.

markus@rpi:/opt/iobroker $ blkid
/dev/mmcblk0p1: LABEL_FATBOOT="boot" LABEL="boot" UUID="0C61-73F5" BLOCK_SIZE="512" TYPE="vfat" PARTUUID="02211fe5-01"
/dev/mmcblk0p2: LABEL="rootfs" UUID="43f2d0bb-83be-464f-94d0-9a751f376c64" BLOCK_SIZE="4096" TYPE="ext4" PARTUUID="02211fe5-02"
/dev/sda1: LABEL="ESD-USB" UUID="5CD7-2DC8" BLOCK_SIZE="512" TYPE="vfat" PARTUUID="292eb410-01"
/dev/sdb1: UUID="bbe67a8e-80a1-4c79-992c-a11ebfacecfe" BLOCK_SIZE="4096" TYPE="ext4" PARTUUID="3b18e43a-01"
/dev/sdb2: UUID="c25aeb0d-0033-4d60-a8a9-a914652a27c1" TYPE="swap" PARTUUID="3b18e43a-02"




markus@rpi:/opt/iobroker $ uname -m && type -P nodejs node npm && nodejs -v && node -v && npm -v && iob -v && whoami && groups && pwd && sudo apt update &> /dev/null && sudo apt update && apt policy nodejs
armv7l
/usr/bin/nodejs
/usr/bin/node
/usr/bin/npm
v16.17.0
v16.17.0
8.15.0
4.0.23
markus
markus adm cdrom sudo audio video plugdev games users input netdev lpadmin gpio iobroker
/opt/iobroker
OK:1 http://archive.raspberrypi.org/debian bullseye InRelease
OK:2 http://raspbian.raspberrypi.org/raspbian bullseye InRelease
OK:3 https://deb.nodesource.com/node_16.x bullseye InRelease
OK:4 https://dl.yarnpkg.com/debian stable InRelease
Paketlisten werden gelesen… Fertig
Abhängigkeitsbaum wird aufgebaut… Fertig
Statusinformationen werden eingelesen… Fertig
Alle Pakete sind aktuell.
nodejs:
 Installiert:           16.17.0-deb-1nodesource1
 Installationskandidat: 16.17.0-deb-1nodesource1
 Versionstabelle:
*** 16.17.0-deb-1nodesource1 500
       500 https://deb.nodesource.com/node_16.x bullseye/main armhf Packages
       100 /var/lib/dpkg/status
    12.22.12~dfsg-1~deb11u1 500
       500 http://raspbian.raspberrypi.org/raspbian bullseye/main armhf Packages

Thomas Braun

@funkytown

Ich würde da halt die UUID in die cmdline.txt eintragen. Dann springt dir die boot-Partition auch nicht weg.

Zum iobroker: Logs? Kommandozeile?

funkytown

@thomas-braun
Hab den Eintrag in der cmdline.txt gemacht und rebootet.
Welche Logs benötigst du jetzt?

markus@rpi:~ $ blkid
/dev/mmcblk0p1: LABEL_FATBOOT="boot" LABEL="boot" UUID="0C61-73F5" BLOCK_SIZE="512" TYPE="vfat" PARTUUID="02211fe5-01"
/dev/mmcblk0p2: LABEL="rootfs" UUID="43f2d0bb-83be-464f-94d0-9a751f376c64" BLOCK_SIZE="4096" TYPE="ext4" PARTUUID="02211fe5-02"
/dev/sda1: LABEL="ESD-USB" UUID="5CD7-2DC8" BLOCK_SIZE="512" TYPE="vfat" PARTUUID="292eb410-01"
/dev/sdb1: UUID="bbe67a8e-80a1-4c79-992c-a11ebfacecfe" BLOCK_SIZE="4096" TYPE="ext4" PARTUUID="3b18e43a-01"
/dev/sdb2: UUID="c25aeb0d-0033-4d60-a8a9-a914652a27c1" TYPE="swap" PARTUUID="3b18e43a-02"

markus@rpi:~ $ cat /boot/cmdline.txt
dwc_otg.lpm_enable=0 console=serial0,115200 console=tty1 root=PARTUUID=3b18e43a-01 rootfstype=ext4 elevator=deadline fsck.repair=yes rootwait quiet splash plymouth.ignore-serial-consoles

Thomas Braun

@funkytown

iobroker status
iobroker update
iobroker list instances

funkytown

@thomas-braun

markus@rpi:~ $ iobroker status
iobroker is running on this host.


Objects type: jsonl
States  type: jsonl


markus@rpi:~ $ iobroker update
Used repository: stable
Adapter    "admin"        : 6.2.22   , installed 6.2.20 [Updatable]
Adapter    "alexa2"       : 3.19.9   , installed 3.19.7 [Updatable]
Adapter    "backitup"     : 2.4.12   , installed 2.4.10 [Updatable]
Adapter    "cloud"        : 4.2.2    , installed 4.2.2
Adapter    "cul"          : 2.0.2    , installed 2.0.2
Adapter    "discovery"    : 3.0.5    , installed 3.0.5
Adapter    "dwd"          : 2.8.3    , installed 2.8.3
Adapter    "email"        : 1.1.3    , installed 1.1.3
Adapter    "history"      : 2.2.0    , installed 2.2.0
Adapter    "hm-rega"      : 3.0.40   , installed 3.0.40
Adapter    "hm-rpc"       : 1.15.12  , installed 1.15.12
Adapter    "icons-mfd-svg": 1.1.0    , installed 1.1.0
Adapter    "info"         : 1.9.19   , installed 1.9.19
Adapter    "iot"          : 1.11.9   , installed 1.11.8 [Updatable]
Adapter    "javascript"   : 6.0.3    , installed 6.0.0  [Updatable]
Controller "js-controller": 4.0.23   , installed 4.0.23
Adapter    "linux-control": 1.1.3    , installed 1.1.5
Adapter    "mqtt"         : 4.0.7    , installed 4.0.7
Adapter    "node-red"     : 4.0.0    , installed 3.3.1  [Updatable]
Adapter    "openweathermap": 0.3.0   , installed 0.3.0
Adapter    "ping"         : 1.5.3    , installed 1.5.3
Adapter    "pollenflug"   : 1.0.6    , installed 1.0.6
Adapter    "pushover"     : 3.0.3    , installed 3.0.2  [Updatable]
Adapter    "radar2"       : 2.0.3    , installed 2.0.3
Adapter    "rpi2"         : 1.3.2    , installed 1.3.2
Adapter    "scenes"       : 2.3.9    , installed 2.3.9
Adapter    "simple-api"   : 2.7.0    , installed 2.7.0
Adapter    "socketio"     : 4.2.0    , installed 4.2.0
Adapter    "synology"     : 2.1.9    , installed 2.1.9
Adapter    "tankerkoenig" : 2.1.1    , installed 2.1.1
Adapter    "telegram"     : 1.14.1   , installed 1.13.0 [Updatable]
Adapter    "text2command" : 2.2.2    , installed 2.2.2
Adapter    "tr-064"       : 4.2.16   , installed 4.2.16
Adapter    "trashschedule": 2.0.3    , installed 2.0.3
Adapter    "vis"          : 1.4.15   , installed 1.4.15
Adapter    "vis-material-advanced": 1.7.2, installed 1.7.2
Adapter    "web"          : 4.3.0    , installed 4.3.0
Adapter    "withings"     : 0.0.9    , installed 0.0.9
Adapter    "ws"           : 1.3.0    , installed 1.3.0
Adapter    "yahka"        : 0.13.1   , installed 0.13.1


markus@rpi:~ $ iobroker list instances
  system.adapter.admin.0                  : admin                 : rpi                                      -  enabled, port: 8081, bind: 0.0.0.0, run as: admin
  system.adapter.admin.1                  : admin                 : rpi                                      -  enabled, port: 8081, bind: 0.0.0.0, run as: admin
  system.adapter.alexa2.0                 : alexa2                : rpi                                      -  enabled
  system.adapter.alexa2.1                 : alexa2                : rpi                                      -  enabled
+ system.adapter.backitup.0               : backitup              : rpi                                      -  enabled
+ system.adapter.discovery.0              : discovery             : rpi                                      -  enabled
  system.adapter.dwd.0                    : dwd                   : rpi                                      - disabled
+ system.adapter.email.0                  : email                 : rpi                                      -  enabled
+ system.adapter.history.0                : history               : rpi                                      -  enabled
+ system.adapter.hm-rega.0                : hm-rega               : rpi                                      -  enabled
+ system.adapter.hm-rpc.0                 : hm-rpc                : rpi                                      -  enabled, port: 0
+ system.adapter.hm-rpc.1                 : hm-rpc                : rpi                                      -  enabled, port: 0
+ system.adapter.hm-rpc.2                 : hm-rpc                : rpi                                      -  enabled, port: 0
+ system.adapter.hm-rpc.3                 : hm-rpc                : rpi                                      -  enabled, port: 0
  system.adapter.icons-mfd-svg.0          : icons-mfd-svg         : rpi                                      - disabled
+ system.adapter.info.0                   : info                  : rpi                                      -  enabled
+ system.adapter.iot.0                    : iot                   : rpi                                      -  enabled
+ system.adapter.javascript.0             : javascript            : rpi                                      -  enabled
+ system.adapter.linux-control.0          : linux-control         : rpi                                      -  enabled
+ system.adapter.mqtt.0                   : mqtt                  : rpi                                      -  enabled, port: 1883, bind: 0.0.0.0
+ system.adapter.ping.0                   : ping                  : rpi                                      -  enabled
  system.adapter.pollenflug.0             : pollenflug            : rpi                                      - disabled
+ system.adapter.pushover.0               : pushover              : rpi                                      -  enabled
+ system.adapter.rpi2.0                   : rpi2                  : rpi                                      -  enabled
+ system.adapter.scenes.0                 : scenes                : rpi                                      -  enabled
  system.adapter.synology.0               : synology              : rpi                                      - disabled, port: 5000
+ system.adapter.tankerkoenig.0           : tankerkoenig          : rpi                                      -  enabled
  system.adapter.telegram.0               : telegram              : rpi                                      - disabled, port: 8443, bind: 0.0.0.0
  system.adapter.text2command.0           : text2command          : rpi                                      - disabled
+ system.adapter.tr-064.0                 : tr-064                : rpi                                      -  enabled
  system.adapter.vis-material-advanced.0  : vis-material-advanced : rpi                                      - disabled
  system.adapter.vis.0                    : vis                   : rpi                                      - disabled
  system.adapter.web.0                    : web                   : rpi                                      -  enabled, port: 8082, bind: 0.0.0.0, run as: admin
  system.adapter.withings.0               : withings              : rpi                                      - disabled
  system.adapter.yahka.0                  : yahka                 : rpi                                      - disabled
+ system.adapter.yahka.1                  : yahka                 : rpi                                      -  enabled

+ instance is alive

Thomas Braun

@funkytown

iobroker upgrade
iobroker del admin.1
iobroker start admin.0

Warum 2 Instanzen vom Admin?

funkytown

@thomas-braun

Da stimmt schon was nicht!

markus@rpi:~ $ iobroker upgrade

This upgrade of "alexa2" will introduce the following changes:
==========================================================================
-> 3.19.9:
Receive the correct player status again when musik is stopped

-> 3.19.8:
Add safeguard for too high intervals
==========================================================================

Would you like to upgrade alexa2 from @3.19.7 to @3.19.9 now? [(y)es, (n)o]: y
Update alexa2 from @3.19.7 to @3.19.9
NPM version: 8.15.0
Installing iobroker.alexa2@3.19.9... (System call)
host.rpi Cannot install iobroker.alexa2@3.19.9: 217

Thomas Braun

@funkytown

for i in $(find /opt/iobroker/node_modules -type d -iname ".*-????????" ! -iname ".local-chromium"); do rm -rf ${i%%/}; done

funkytown

@thomas-braun

markus@rpi:~ $ iobroker upgrade

This upgrade of "openweathermap" will introduce the following changes:
==========================================================================
-> 0.3.0:
Added new widget for vis2.0
==========================================================================

Would you like to upgrade openweathermap from @0.2.5 to @0.3.0 now? [(y)es, (n)o]: n
No upgrade of "openweathermap" desired.

This upgrade of "admin" will introduce the following changes:
==========================================================================
-> 6.2.22:
Corrected admin4 adapter settings

-> 6.2.21:
Corrected small JSON config issue
==========================================================================

Would you like to upgrade admin from @6.2.20 to @6.2.22 now? [(y)es, (n)o]: y
Update admin from @6.2.20 to @6.2.22
host.rpi Adapter "system.adapter.admin.0" is stopped.
NPM version: 8.15.0
Installing iobroker.admin@6.2.22... (System call)
host.rpi Cannot install iobroker.admin@6.2.22: 217

Thomas Braun

@funkytown sagte in iobroker restore 0 funktioniert nicht:

iobroker upgrade admin --debug

funkytown

@thomas-braun

markus@rpi:~ $ iobroker upgrade admin --debug

This upgrade of "admin" will introduce the following changes:
==========================================================================
-> 6.2.22:
Corrected admin4 adapter settings

-> 6.2.21:
Corrected small JSON config issue
==========================================================================

Would you like to upgrade admin from @6.2.20 to @6.2.22 now? [(y)es, (n)o]: y
Update admin from @6.2.20 to @6.2.22
NPM version: 8.15.0
Installing iobroker.admin@6.2.22... (System call)
npm ERR! code ENOTEMPTY
npm ERR! syscall rename
npm ERR! path /opt/iobroker/node_modules/addressparser
npm ERR! dest /opt/iobroker/node_modules/.addressparser-qF9vtHFg
npm ERR! errno -39
npm ERR! ENOTEMPTY: directory not empty, rename '/opt/iobroker/node_modules/addressparser' -> '/opt/iobroker/node_modules/.addressparser-qF9vtHFg'

npm ERR! A complete log of this run can be found in:
npm ERR!     /home/iobroker/.npm/_logs/2022-09-22T20_14_23_357Z-debug-0.log
host.rpi Cannot install iobroker.admin@6.2.22: 217

Thomas Braun

@funkytown
Nochmal

for i in $(find /opt/iobroker/node_modules -type d -iname ".*-????????" ! -iname ".local-chromium"); do rm -rf ${i%%/}; done

funkytown

@thomas-braun
Zwischendurch einmal ein DANKE an dich!

funkytown

@thomas-braun

markus@rpi:~ $ iobroker upgrade admin --debug

This upgrade of "admin" will introduce the following changes:
==========================================================================
-> 6.2.22:
Corrected admin4 adapter settings

-> 6.2.21:
Corrected small JSON config issue
==========================================================================

Would you like to upgrade admin from @6.2.20 to @6.2.22 now? [(y)es, (n)o]: y
Update admin from @6.2.20 to @6.2.22
NPM version: 8.15.0
Installing iobroker.admin@6.2.22... (System call)
npm WARN deprecated dgram@1.0.1: npm is holding this package for security reasons. As it's a core Node module, we will not transfer it over to other users. You may safely remove the package from your dependencies.
npm WARN deprecated request-promise-native@1.0.9: request-promise-native has been deprecated because it extends the now deprecated request package, see https://github.com/request/request/issues/3142
npm WARN deprecated har-validator@5.1.5: this library is no longer supported
npm WARN deprecated request-promise@4.2.6: request-promise has been deprecated because it extends the now deprecated request package, see https://github.com/request/request/issues/3142
npm WARN deprecated json3@3.3.2: Please use the native JSON object instead of JSON 3
npm WARN deprecated querystring@0.2.1: The querystring API is considered Legacy. new code should use the URLSearchParams API instead.
npm WARN deprecated node-inspect@2.0.0: This module is part of Node.js core and does not need to be installed separately. It is now unmaintained.
npm WARN deprecated multer@1.4.4: Multer 1.x is affected by CVE-2022-24434. This is fixed in v1.4.4-lts.1 which drops support for versions of Node.js before 6. Please upgrade to at least Node.js 6 and version 1.4.4-lts.1 of Multer. If you need support for older versions of Node.js, we are open to accepting patches that would fix the CVE on the main 1.x release line, whilst maintaining compatibility with Node.js 0.10.
npm WARN deprecated debug@4.1.1: Debug versions >=3.2.0 <3.2.7 || >=4 <4.3.1 have a low-severity ReDos regression when used in a Node.js environment. It is recommended you upgrade to 3.2.7 or 4.3.1. (https://github.com/visionmedia/debug/issues/797)
npm WARN deprecated debug@4.1.1: Debug versions >=3.2.0 <3.2.7 || >=4 <4.3.1 have a low-severity ReDos regression when used in a Node.js environment. It is recommended you upgrade to 3.2.7 or 4.3.1. (https://github.com/visionmedia/debug/issues/797)
npm WARN deprecated debug@4.1.1: Debug versions >=3.2.0 <3.2.7 || >=4 <4.3.1 have a low-severity ReDos regression when used in a Node.js environment. It is recommended you upgrade to 3.2.7 or 4.3.1. (https://github.com/visionmedia/debug/issues/797)
npm WARN deprecated uuid@3.4.0: Please upgrade  to version 7 or higher.  Older versions may use Math.random() in certain circumstances, which is known to be problematic.  See https://v8.dev/blog/math-random for details.
npm WARN deprecated request@2.88.2: request has been deprecated, see https://github.com/request/request/issues/3142
npm WARN deprecated axios@0.27.0: Formdata complete broken, incorrect build size
npm ERR! code ENOTEMPTY
npm ERR! syscall rename
npm ERR! path /opt/iobroker/node_modules/node-red-node-email/node_modules/encoding-japanese/src
npm ERR! dest /opt/iobroker/node_modules/.node-red-node-email-1lk8B7Gi/node_modules/encoding-japanese/src
npm ERR! errno -39
npm ERR! ENOTEMPTY: directory not empty, rename '/opt/iobroker/node_modules/node-red-node-email/node_modules/encoding-japanese/src' -> '/opt/iobroker/node_modules/.node-red-node-email-1lk8B7Gi/node_modules/encoding-japanese/src'

npm ERR! A complete log of this run can be found in:
npm ERR!     /home/iobroker/.npm/_logs/2022-09-22T20_27_53_207Z-debug-0.log
host.rpi Cannot install iobroker.admin@6.2.22: 217
markus@rpi:~ $

mikeal created this issue in request/request

open Request’s Past, Present and Future #3142

mikeal created this issue in request/request

open Request’s Past, Present and Future #3142

Qix- created this issue in visionmedia/debug

closed ReDos Vulnerability Regression Visibility Notice #797

Qix- created this issue in visionmedia/debug

closed ReDos Vulnerability Regression Visibility Notice #797

Qix- created this issue in visionmedia/debug

closed ReDos Vulnerability Regression Visibility Notice #797

mikeal created this issue in request/request

open Request’s Past, Present and Future #3142

Thomas Braun

@funkytown

Führst du das nicht aus?

for i in $(find /opt/iobroker/node_modules -type d -iname ".*-????????" ! -iname ".local-chromium"); do rm -rf ${i%%/}; done

Das sollte das eigentlich alles bereinigen.

NEWS

iobroker restore 0 funktioniert nicht

open Request’s Past, Present and Future #3142

open Request’s Past, Present and Future #3142

closed ReDos Vulnerability Regression Visibility Notice #797

closed ReDos Vulnerability Regression Visibility Notice #797

closed ReDos Vulnerability Regression Visibility Notice #797

open Request’s Past, Present and Future #3142

Support us

680
Online

31.8k
Users

80.0k
Topics

1.3m
Posts

NEWS

iobroker restore 0 funktioniert nicht

open Request’s Past, Present and Future #3142

open Request’s Past, Present and Future #3142

closed ReDos Vulnerability Regression Visibility Notice #797

closed ReDos Vulnerability Regression Visibility Notice #797

closed ReDos Vulnerability Regression Visibility Notice #797

open Request’s Past, Present and Future #3142

Support us

680Online

31.8kUsers

80.0kTopics

1.3mPosts

680
Online

31.8k
Users

80.0k
Topics

1.3m
Posts