Fehler bei Installation i2c Adapter
-
@chris_b Log vom fixer ?
-
@wendy2702 Sorry muss jetzt weg, liefere ich später nach. fixer läuft aus meiner Sicht problemlos durch. Ich poste es später nochmals.
-
@chris_b Kein Stress bin auch gleich weg
-
Bring dein System auf Debian11/Bullseye.
-
@wendy2702 Hier nun das log vom fixer (aber da sehe ich auch keine wesentliche Info, die auf ein potentielles Problem hindeutet):
library: loaded Library version=2022-12-09 ========================================================================== Welcome to the ioBroker installation fixer! Script version: 2022-12-22 You might need to enter your password a couple of times. ========================================================================== ========================================================================== Installing prerequisites (1/4) ========================================================================== Holen:1 http://raspbian.raspberrypi.org/raspbian buster InRelease [15.0 kB] OK:2 http://archive.raspberrypi.org/debian buster InRelease OK:3 https://deb.nodesource.com/node_16.x buster InRelease OK:4 https://phoscon.de/apt/deconz buster InRelease Es wurden 15.0 kB in 1 s geholt (10.2 kB/s). Paketlisten werden gelesen... Fertig Installed gcc-c++ ========================================================================== Checking ioBroker user and directory permissions (2/4) ========================================================================== Created /etc/sudoers.d/iobroker Fixing directory permissions... ========================================================================== Database maintenance (3/4) ========================================================================== Checking for uncompressed JSONL databases... This might take a while! Compressing /opt/iobroker/iobroker-data/states.jsonl Compressing /opt/iobroker/iobroker-data/objects.jsonl Compressed 2 JSONL files. Done ========================================================================== Checking autostart (4/4) ========================================================================== Enabling autostart... Autostart enabled! ========================================================================== Your installation was fixed successfully Run iobroker start to start ioBroker again! ========================================================================== -
Bring dein System auf Debian11/Bullseye.
-
@thomas-braun Ich höre Dich klar und deutlich, Thomas. Ich war nur so freundlich die Frage von wendy2702 zu beantworten. Danke.
-
Ist halt die Frage welche Baustelle man zuerst angeht. Das Betriebssystem ist dringlicher.
-
@thomas-braun Ich habe mir nun Zeit genommen mein OS auf Bullseye upzudaten. Vielen Dank für Deine Anleitung
https://forum.iobroker.net/topic/47213/upgrade-von-debian-10-buster-auf-11-bullseye
Update ist gelungen, ich bin jetzt auf Bullseye mit Node.js: v16.19.1 und NPM: v8.19.3.
iobroker läuft wieder ohne Probleme.
Der Versuch den i2c Adapter zu installieren endet im Wesentlichen mit der gleichen Fehlermeldung. Hat in dieser Sache also noch keinen Fortschritt gebracht. -
Dann kannst du ja mit aktuellem OS nochmal
iob diagausführen und bzgl. der Installation auch die vollständigen Rückmeldungen aus dem logfile oder dem Terminal bekannt geben.
-
@thomas-braun Hier die Infos:
Aus iob diagSkript v.2023-01-02 *** BASE SYSTEM *** Model : Raspberry Pi 4 Model B Rev 1.5 Architecture: armv7l Docker: false Virtualization: none Distributor ID: Raspbian Description: Raspbian GNU/Linux 11 (bullseye) Release: 11 Codename: bullseye PRETTY_NAME="Raspbian GNU/Linux 11 (bullseye)" NAME="Raspbian GNU/Linux" VERSION_ID="11" VERSION="11 (bullseye)" VERSION_CODENAME=bullseye ID=raspbian ID_LIKE=debian HOME_URL="http://www.raspbian.org/" SUPPORT_URL="http://www.raspbian.org/RaspbianForums" BUG_REPORT_URL="http://www.raspbian.org/RaspbianBugs" Systemuptime and Load: 15:50:10 up 43 min, 1 user, load average: 0.35, 0.25, 0.31 CPU threads: 4 *** Time and Time Zones *** Sat Feb 18 14:50:10 UTC 2023 Sat Feb 18 15:50:10 CET 2023 CET +0100 Europe/Zurich *** User and Groups *** pi /home/pi pi adm dialout cdrom sudo audio video plugdev games users input netdev gpio i2c spi iobroker pijuice *** X-Server-Setup *** X-Server: false Desktop: Terminal: tty Boot Target: graphical.target *** MEMORY *** total used free shared buff/cache available Mem: 3.8G 1.1G 2.4G 0.0K 312M 2.9G Swap: 99M 0B 99M Total: 3.9G 1.1G 2.5G 3838 M total memory 1105 M used memory 184 M active memory 1127 M inactive memory 2420 M free memory 50 M buffer memory 262 M swap cache 99 M total swap 0 M used swap 99 M free swap *** FILESYSTEM *** Filesystem Type Size Used Avail Use% Mounted on /dev/root ext4 15G 4.8G 9.0G 35% / devtmpfs devtmpfs 1.8G 0 1.8G 0% /dev tmpfs tmpfs 1.9G 0 1.9G 0% /dev/shm tmpfs tmpfs 768M 688K 768M 1% /run tmpfs tmpfs 5.0M 4.0K 5.0M 1% /run/lock /dev/mmcblk0p1 vfat 253M 50M 203M 20% /boot tmpfs tmpfs 384M 0 384M 0% /run/user/1000 Messages in dmesg: [Sat Feb 18 15:06:39 2023] Kernel command line: coherent_pool=1M 8250.nr_uarts=1 snd_bcm2835.enable_compat_alsa=0 snd_bcm2835.enable_hdmi=1 smsc95xx.macaddr=E4:5F:01:A8:12:03 vc_mem.mem_base=0x3ec00000 vc_mem.mem_size=0x40000000 console=ttyAMA0,115200 console=tty1 root=PARTUUID=cd3e8f54-02 rootfstype=ext4 elevator=deadline fsck.repair=yes rootwait [Sat Feb 18 15:06:42 2023] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Opts: (null). Quota mode: none. [Sat Feb 18 15:06:42 2023] VFS: Mounted root (ext4 filesystem) readonly on device 179:2. [Sat Feb 18 15:06:44 2023] EXT4-fs (mmcblk0p2): re-mounted. Opts: (null). Quota mode: none. Show mounted filesystems (real ones only): TARGET SOURCE FSTYPE OPTIONS / /dev/mmcblk0p2 ext4 rw,noatime `-/boot /dev/mmcblk0p1 vfat rw,relatime,fmask=0022,dmask=0022,codepage=437,iocharset=ascii,shortname=mixed,flush,errors=remount-ro Files in neuralgic directories: /var: 548M /var/ 299M /var/cache 294M /var/cache/apt 229M /var/cache/apt/archives 95M /var/lib /opt/iobroker/backups: 21M /opt/iobroker/backups/ /opt/iobroker/iobroker-data: 234M /opt/iobroker/iobroker-data/ 105M /opt/iobroker/iobroker-data/files 94M /opt/iobroker/iobroker-data/backup-objects 51M /opt/iobroker/iobroker-data/files/javascript.admin 32M /opt/iobroker/iobroker-data/files/javascript.admin/static/js The five largest files in iobroker-data are: 20M /opt/iobroker/iobroker-data/objects.jsonl 6.9M /opt/iobroker/iobroker-data/files/javascript.admin/static/js/610.de0231c9.chunk.js.map 6.3M /opt/iobroker/iobroker-data/files/admin.admin/custom/static/js/vendors-node_modules_iobroker_adapter-react-v5_assets_devices_parseNames_js-node_modules_iobr-99c23e.847b8ad9.chunk.js.map 6.2M /opt/iobroker/iobroker-data/objects.json.migrated 6.2M /opt/iobroker/iobroker-data/objects.json.bak.migrated *** NodeJS-Installation *** /usr/bin/nodejs v16.19.1 /usr/bin/node v16.19.1 /usr/bin/npm 8.19.3 /usr/bin/npx 8.19.3 nodejs: Installed: 16.19.1-deb-1nodesource1 Candidate: 16.19.1-deb-1nodesource1 Version table: *** 16.19.1-deb-1nodesource1 500 500 https://deb.nodesource.com/node_16.x bullseye/main armhf Packages 100 /var/lib/dpkg/status 12.22.12~dfsg-1~deb11u3 500 500 http://raspbian.raspberrypi.org/raspbian bullseye/main armhf Packages Temp directories causing npm8 problem: 0 *** ioBroker-Installation *** ioBroker Status iobroker is running on this host. Objects type: jsonl States type: jsonl Core adapters versions js-controller: 4.0.24 admin: 6.3.5 javascript: 6.1.4 Adapters from github: 0 Adapter State + system.adapter.admin.0 : admin : raspberrypi4-iob - enabled, port: 8081, bind: 0.0.0.0 (SSL), run as: admin + system.adapter.backitup.0 : backitup : raspberrypi4-iob - enabled + system.adapter.cloud.0 : cloud : raspberrypi4-iob - enabled + system.adapter.denon.0 : denon : raspberrypi4-iob - enabled + system.adapter.denon.1 : denon : raspberrypi4-iob - enabled + system.adapter.discovery.0 : discovery : raspberrypi4-iob - enabled system.adapter.flot.0 : flot : raspberrypi4-iob - disabled + system.adapter.heos.0 : heos : raspberrypi4-iob - enabled + system.adapter.history.0 : history : raspberrypi4-iob - enabled + system.adapter.hue.0 : hue : raspberrypi4-iob - enabled, port: 80 + system.adapter.hue.1 : hue : raspberrypi4-iob - enabled, port: 80 + system.adapter.info.0 : info : raspberrypi4-iob - enabled + system.adapter.javascript.0 : javascript : raspberrypi4-iob - enabled + system.adapter.netatmo.0 : netatmo : raspberrypi4-iob - enabled + system.adapter.ping.0 : ping : raspberrypi4-iob - enabled + system.adapter.rpi2.0 : rpi2 : raspberrypi4-iob - enabled + system.adapter.simple-api.0 : simple-api : raspberrypi4-iob - enabled, port: 8087, bind: 0.0.0.0, run as: admin + system.adapter.socketio.0 : socketio : raspberrypi4-iob - enabled, port: 8084, bind: 0.0.0.0, run as: admin system.adapter.vis-hqwidgets.0 : vis-hqwidgets : raspberrypi4-iob - disabled system.adapter.vis.0 : vis : raspberrypi4-iob - enabled + system.adapter.web.0 : web : raspberrypi4-iob - enabled, port: 8082, bind: 0.0.0.0, run as: admin + system.adapter.yahka.0 : yahka : raspberrypi4-iob - enabled + instance is alive Enabled adapters with bindings + system.adapter.admin.0 : admin : raspberrypi4-iob - enabled, port: 8081, bind: 0.0.0.0 (SSL), run as: admin + system.adapter.hue.0 : hue : raspberrypi4-iob - enabled, port: 80 + system.adapter.hue.1 : hue : raspberrypi4-iob - enabled, port: 80 + system.adapter.simple-api.0 : simple-api : raspberrypi4-iob - enabled, port: 8087, bind: 0.0.0.0, run as: admin + system.adapter.socketio.0 : socketio : raspberrypi4-iob - enabled, port: 8084, bind: 0.0.0.0, run as: admin + system.adapter.web.0 : web : raspberrypi4-iob - enabled, port: 8082, bind: 0.0.0.0, run as: admin ioBroker-Repositories stable : http://download.iobroker.net/sources-dist.json beta : http://download.iobroker.net/sources-dist-latest.json Active repo(s): stable Installed ioBroker-Instances Used repository: stable Adapter "admin" : 6.3.5 , installed 6.3.5 Adapter "backitup" : 2.5.12 , installed 2.5.12 Adapter "cloud" : 4.3.0 , installed 4.3.0 Adapter "denon" : 1.13.4 , installed 1.13.4 Adapter "discovery" : 3.1.0 , installed 3.1.0 Adapter "email" : 1.1.4 , installed 1.1.4 Adapter "flot" : 1.11.0 , installed 1.11.0 Adapter "heos" : 1.10.0 , installed 1.10.0 Adapter "history" : 2.2.4 , installed 2.2.4 Adapter "homekit-controller": 0.5.1, installed 0.5.1 Adapter "hue" : 3.7.1 , installed 3.7.1 Adapter "info" : 1.9.19 , installed 1.9.19 Adapter "javascript" : 6.1.4 , installed 6.1.4 Controller "js-controller": 4.0.24 , installed 4.0.24 Adapter "netatmo" : 2.0.5 , installed 2.0.5 Adapter "ping" : 1.5.3 , installed 1.5.3 Adapter "rpi2" : 1.3.2 , installed 1.3.2 Adapter "simple-api" : 2.7.2 , installed 2.7.2 Adapter "socketio" : 4.2.0 , installed 4.2.0 Adapter "vis" : 1.4.15 , installed 1.4.15 Adapter "vis-hqwidgets": 1.3.0 , installed 1.3.0 Adapter "web" : 4.3.0 , installed 4.3.0 Adapter "ws" : 1.3.0 , installed 1.3.0 Adapter "yahka" : 0.13.1 , installed 0.13.1 Objects and States Please stand by - This may take a while Objects: 3096 States: 2594 *** OS-Repositories and Updates *** Hit:1 http://archive.raspberrypi.org/debian bullseye InRelease Hit:2 http://raspbian.raspberrypi.org/raspbian bullseye InRelease Hit:3 https://deb.nodesource.com/node_16.x bullseye InRelease Hit:4 https://phoscon.de/apt/deconz bullseye InRelease Reading package lists... Pending Updates: 0 *** Listening Ports *** Active Internet connections (only servers) Proto Recv-Q Send-Q Local Address Foreign Address State User Inode PID/Program name tcp 0 0 127.0.0.1:44821 0.0.0.0:* LISTEN 1001 56591 13999/io.yahka.0 tcp 0 0 127.0.0.1:9000 0.0.0.0:* LISTEN 1001 52502 12844/iobroker.js-c tcp 0 0 127.0.0.1:9001 0.0.0.0:* LISTEN 1001 52495 12844/iobroker.js-c tcp 0 0 0.0.0.0:22 0.0.0.0:* LISTEN 0 10727 483/sshd: /usr/sbin tcp6 0 0 :::8082 :::* LISTEN 1001 56445 13795/io.web.0 tcp6 0 0 :::8081 :::* LISTEN 1001 51533 12879/io.admin.0 tcp6 0 0 :::8087 :::* LISTEN 1001 53094 13274/io.simple-api tcp6 0 0 :::8084 :::* LISTEN 1001 52191 13449/io.socketio.0 tcp6 0 0 :::39029 :::* LISTEN 1001 56583 13999/io.yahka.0 tcp6 0 0 :::22 :::* LISTEN 0 10729 483/sshd: /usr/sbin udp 0 0 0.0.0.0:49190 0.0.0.0:* 1001 51872 13217/io.heos.0 udp 0 0 0.0.0.0:68 0.0.0.0:* 0 14614 645/dhcpcd udp 0 0 0.0.0.0:5353 0.0.0.0:* 1001 56584 13999/io.yahka.0 udp 0 0 0.0.0.0:5353 0.0.0.0:* 108 11680 363/avahi-daemon: r udp 0 0 0.0.0.0:53498 0.0.0.0:* 108 11682 363/avahi-daemon: r udp6 0 0 :::546 :::* 0 14642 645/dhcpcd udp6 0 0 :::5353 :::* 108 11681 363/avahi-daemon: r udp6 0 0 :::52971 :::* 108 11683 363/avahi-daemon: r *** Log File - Last 25 Lines *** 2023-02-18 15:17:24.642 - info: yahka.0 (13999) adding Wasser Höfli 2A with UUID: e801a2ae-6c62-44d0-870f-a7a316e4a4b6 2023-02-18 15:17:24.646 - info: yahka.0 (13999) adding Wasser Garten 3A with UUID: e7a975c7-14b7-4db6-93c9-a5c06b0f0906 2023-02-18 15:17:24.651 - info: yahka.0 (13999) adding Wasser Garten 4A with UUID: b19d1566-51f7-4dbf-a436-f10b00d4d3bf 2023-02-18 15:17:24.654 - info: yahka.0 (13999) adding Wasser Garten 5A with UUID: cfba9462-495d-445e-bdaf-92d89e5d323c 2023-02-18 15:17:24.659 - info: yahka.0 (13999) adding Wasser Feedback 1 with UUID: 80efd4c4-8f76-48b0-b794-663ac97d7d2a 2023-02-18 15:17:24.662 - info: yahka.0 (13999) adding Wasser Feedback 2 with UUID: c7c1a3fe-b438-43eb-a479-bbda51d1d6c8 2023-02-18 15:17:24.666 - info: yahka.0 (13999) adding Wasser Feedback 3 with UUID: 3270564c-f984-4208-88ed-bcafad48b3e3 2023-02-18 15:17:24.671 - info: yahka.0 (13999) adding Wasser Feedback 4 with UUID: 94316748-7b8a-456d-9813-e1529df2ff42 2023-02-18 15:17:24.675 - info: yahka.0 (13999) adding Wasser Feedback 5 with UUID: 192619c5-90be-4580-8af2-9cdd5282fc7a 2023-02-18 15:17:24.678 - info: yahka.0 (13999) adding Wasser Feedback 6 with UUID: 442ced11-b93a-4a60-9eaf-d6b789ce2e54 2023-02-18 15:17:24.682 - info: yahka.0 (13999) adding Wasser Garten 6A with UUID: 5356872a-1195-47ad-a30c-62d253157baf 2023-02-18 15:17:24.686 - info: yahka.0 (13999) adding Motion Cat1 with UUID: 01ba38ce-6b34-4467-8989-7af6f0774eeb 2023-02-18 15:17:24.689 - info: yahka.0 (13999) adding Motion Cat2 with UUID: 9122c6a7-6598-4298-84f5-ecc8c2598e8d 2023-02-18 15:17:24.692 - info: yahka.0 (13999) publishing bridge Yahka-0 on 0.0.0.0 using ciao 2023-02-18 15:19:16.604 - info: admin.0 (12879) ==> Connected system.user.admin from ::ffff:192.168.1.137 2023-02-18 15:21:14.629 - info: host.raspberrypi4-iob iobroker add i2c auto --host raspberrypi4-iob --debug 2023-02-18 15:21:18.476 - info: host.raspberrypi4-iob iobroker NPM version: 8.19.3 2023-02-18 15:21:18.480 - info: host.raspberrypi4-iob iobroker Installing iobroker.i2c@1.2.1... (System call) 2023-02-18 15:21:27.131 - info: host.raspberrypi4-iob iobroker npm ERR! code 1npm ERR! path /opt/iobroker/node_modules/i2c-bus 2023-02-18 15:21:27.137 - info: host.raspberrypi4-iob iobroker npm ERR! command failed 2023-02-18 15:21:27.138 - info: host.raspberrypi4-iob iobroker npm ERR! command sh -c -- node-gyp rebuildnpm ERR! node:internal/modules/cjs/loader:1024npm ERR! throw err;npm ERR! ^npm ERR! npm ERR! Error: Cannot find module 'object-assign'npm ERR! Require stack:npm ERR! - /usr/lib/node_modules/npm/node_modules/node-gyp/node_modules/gauge/render-template.jsnpm ERR! - /usr/lib/node_modules/npm/node_modules/node-gyp/node_modules/gauge/plumbing.jsnpm ERR! - /usr/lib/node_modules/npm/node_modules/node-gyp/node_modules/gauge/index.jsnpm ERR! - /usr/lib/node_modules/npm/node_modules/node-gyp/node_modules/npmlog/log.jsnpm ERR! - /usr/lib/node_modules/npm/node_modules/node-gyp/lib/node-gyp.jsnpm ERR! - /usr/lib/node_modules/npm/node_modules/node-gyp/bin/node-gyp.js 2023-02-18 15:21:27.148 - info: host.raspberrypi4-iob iobroker npm ERR! at Function.Module._resolveFilename (node:internal/modules/cjs/loader:1021:15)npm ERR! at Function.Module._load (node:internal/modules/cjs/loader:866:27)npm ERR! at Module.require (node:internal/modules/cjs/loader:1093:19)npm ERR! at require (node:internal/modules/cjs/helpers:108:18)npm ERR! at Object.<anonymous> (/usr/lib/node_modules/npm/node_modules/node-gyp/node_modules/gauge/render-template.js:4:20)npm ERR! at Module._compile (node:internal/modules/cjs/loader:1191:14)npm ERR! at Object.Module._extensions..js (node:internal/modules/cjs/loader:1245:10)npm ERR! at Module.load (node:internal/modules/cjs/loader:1069:32)npm ERR! at Function.Module._load (node:internal/modules/cjs/loader:904:12)npm ERR! at Module.require (node:internal/modules/cjs/loader:1093:19) {npm ERR! code: 'MODULE_NOT_FOUND',npm ERR! requireStack: [npm ERR! '/usr/lib/node_modules/npm/node_modules/node-gyp/node_modules/gauge/render-template.js',npm ERR! '/usr/lib/node_modules/npm/node_modules/node-gyp/node_modules/gauge/plumbing.js',npm ERR! '/usr/lib/node_modules/npm/node_modules/node-gyp/node_modules/gauge/index.js',npm ERR! '/usr/lib/node_modules/npm/node_modules/node-gyp/node_modules/npmlog/log.js',npm ERR! '/usr/lib/node_modules/npm/node_modules/node-gyp/lib/node-gyp.js',npm ERR! '/usr/lib/node_modules/npm/node_modules/node-gyp/bin/node-gyp.js'npm ERR! ]npm ERR! }npm ERR! A complete log of this run can be found in:npm ERR! /home/iobroker/.npm/_logs/2023-02-18T14_21_19_654Z-debug-0.log 2023-02-18 15:21:27.176 - error: host.raspberrypi4-iob iobroker host.raspberrypi4-iob Cannot install iobroker.i2c@1.2.1: 1 2023-02-18 15:21:28.217 - info: host.raspberrypi4-iob iobroker exit 25 2023-02-18 15:28:25.784 - info: admin.0 (12879) <== Disconnect system.user.admin from ::ffff:192.168.1.137 admin======================= SUMMARY ======================= v.2023-01-02 Operatingsystem: Raspbian GNU/Linux 11 (bullseye) Installation: Native Timezone: Europe/Zurich User-ID: 1000 X-Server: false Boot Target: graphical.target Pending OS-Updates: 0 Nodejs-Installation: /usr/bin/nodejs v16.19.1 /usr/bin/node v16.19.1 /usr/bin/npm 8.19.3 /usr/bin/npx 8.19.3 ioBroker Core: js-controller 4.0.24 admin 6.3.5 ioBroker Status: iobroker is running on this host. Objects type: jsonl States type: jsonl Status admin: + system.adapter.admin.0 : admin : raspberrypi4-iob - enabled, port: 8081, bind: 0.0.0.0 (SSL), run as: admin Pending iob updates: 0 Active repo(s): stable Objects: 3096 States: 2594 Size of iob-Database: 20M /opt/iobroker/iobroker-data/objects.jsonl 6.2M /opt/iobroker/iobroker-data/objects.json.migrated 6.2M /opt/iobroker/iobroker-data/objects.json.bak.migrated 2.1M /opt/iobroker/iobroker-data/states.jsonl 684K /opt/iobroker/iobroker-data/states.json.migrated 684K /opt/iobroker/iobroker-data/states.json.bak.migrated =================== END OF SUMMARY ====================Und hier noch das log (wieder diese superlangen Zeilen):
host.raspberrypi4-iob 2023-02-18 15:21:28.217 info iobroker exit 25 host.raspberrypi4-iob 2023-02-18 15:21:27.176 error iobroker host.raspberrypi4-iob Cannot install iobroker.i2c@1.2.1: 1 host.raspberrypi4-iob 2023-02-18 15:21:27.148 info iobroker npm ERR! at Function.Module._resolveFilename (node:internal/modules/cjs/loader:1021:15)npm ERR! at Function.Module._load (node:internal/modules/cjs/loader:866:27)npm ERR! at Module.require (node:internal/modules/cjs/loader:1093:19)npm ERR! at require (node:internal/modules/cjs/helpers:108:18)npm ERR! at Object.<anonymous> (/usr/lib/node_modules/npm/node_modules/node-gyp/node_modules/gauge/render-template.js:4:20)npm ERR! at Module._compile (node:internal/modules/cjs/loader:1191:14)npm ERR! at Object.Module._extensions..js (node:internal/modules/cjs/loader:1245:10)npm ERR! at Module.load (node:internal/modules/cjs/loader:1069:32)npm ERR! at Function.Module._load (node:internal/modules/cjs/loader:904:12)npm ERR! at Module.require (node:internal/modules/cjs/loader:1093:19) {npm ERR! code: 'MODULE_NOT_FOUND',npm ERR! requireStack: [npm ERR! '/usr/lib/node_modules/npm/node_modules/node-gyp/node_modules/gauge/render-template.js',npm ERR! '/usr/lib/node_modules/npm/node_modules/node-gyp/node_modules/gauge/plumbing.js',npm ERR! '/usr/lib/node_modules/npm/node_modules/node-gyp/node_modules/gauge/index.js',npm ERR! '/usr/lib/node_modules/npm/node_modules/node-gyp/node_modules/npmlog/log.js',npm ERR! '/usr/lib/node_modules/npm/node_modules/node-gyp/lib/node-gyp.js',npm ERR! '/usr/lib/node_modules/npm/node_modules/node-gyp/bin/node-gyp.js'npm ERR! ]npm ERR! }npm ERR! A complete log of this run can be found in:npm ERR! /home/iobroker/.npm/_logs/2023-02-18T14_21_19_654Z-debug-0.log host.raspberrypi4-iob 2023-02-18 15:21:27.138 info iobroker npm ERR! command sh -c -- node-gyp rebuildnpm ERR! node:internal/modules/cjs/loader:1024npm ERR! throw err;npm ERR! ^npm ERR! npm ERR! Error: Cannot find module 'object-assign'npm ERR! Require stack:npm ERR! - /usr/lib/node_modules/npm/node_modules/node-gyp/node_modules/gauge/render-template.jsnpm ERR! - /usr/lib/node_modules/npm/node_modules/node-gyp/node_modules/gauge/plumbing.jsnpm ERR! - /usr/lib/node_modules/npm/node_modules/node-gyp/node_modules/gauge/index.jsnpm ERR! - /usr/lib/node_modules/npm/node_modules/node-gyp/node_modules/npmlog/log.jsnpm ERR! - /usr/lib/node_modules/npm/node_modules/node-gyp/lib/node-gyp.jsnpm ERR! - /usr/lib/node_modules/npm/node_modules/node-gyp/bin/node-gyp.js host.raspberrypi4-iob 2023-02-18 15:21:27.137 info iobroker npm ERR! command failed host.raspberrypi4-iob 2023-02-18 15:21:27.131 info iobroker npm ERR! code 1npm ERR! path /opt/iobroker/node_modules/i2c-bus host.raspberrypi4-iob 2023-02-18 15:21:18.480 info iobroker Installing iobroker.i2c@1.2.1... (System call)Die alternative Lösung ist, dass ich mein i2c Gerät anders ansteuere (über python oder ein C++ Programm) und die Daten dann an iobroker übergebe.
-
Warum hast du nicht die 64bit-Version genommen?
-
@thomas-braun Ja, das ist mir auch aufgefallen. Ich habe den Update nach Deiner Anleitung durchgeführt, und das ursprüngliche System war eben noch 32-bit. Der Update bleibt auf dieser Variante, so wie ich das verstehe. 64-bit würde eine komplette Neuinstallation bedeuten, korrekt?
-
-
cd /opt/iobroker npm ls npm ls object-assign -
@thomas-braun So sieht es aus:
iobroker.inst@3.0.0 /opt/iobroker ├── @types/caseless@0.12.2 extraneous ├── @types/request@2.48.8 extraneous ├── @types/tough-cookie@4.0.2 extraneous ├── coffeescript@1.12.7 extraneous ├── iobroker.admin@6.3.5 ├── iobroker.backitup@2.5.12 ├── iobroker.cloud@4.3.0 ├── iobroker.denon@1.13.4 ├── iobroker.discovery@3.1.0 ├── iobroker.email@1.1.4 ├── iobroker.flot@1.11.0 ├── iobroker.heos@1.10.0 ├── iobroker.history@2.2.4 ├── iobroker.homekit-controller@0.5.1 ├── iobroker.hue@3.7.1 ├── iobroker.info@1.9.19 ├── iobroker.javascript@6.1.4 ├── iobroker.js-controller@4.0.24 ├── iobroker.netatmo@2.0.5 ├── iobroker.ping@1.5.3 ├── iobroker.rpi2@1.3.2 ├── iobroker.simple-api@2.7.2 ├── iobroker.socketio@4.2.0 ├── iobroker.vis-hqwidgets@1.3.0 ├── iobroker.vis@1.4.15 ├── iobroker.web@4.3.0 ├── iobroker.yahka@0.13.1 ├── jsonata@1.8.6 extraneous ├── node-inspect@2.0.0 extraneous ├── picocolors@1.0.0 extraneous ├── suncalc2@1.8.1 extraneous ├── typescript@4.8.2 extraneous ├── virtual-tsc@0.6.2 extraneous └── wake_on_lan@1.0.0 extraneousiobroker.inst@3.0.0 /opt/iobroker └─┬ iobroker.homekit-controller@0.5.1 └─┬ hap-controller@0.8.1 └─┬ @abandonware/noble@1.9.2-15 └─┬ @abandonware/bluetooth-hci-socket@0.5.3-8 └─┬ @mapbox/node-pre-gyp@1.0.9 └─┬ npmlog@5.0.1 └─┬ gauge@3.0.2 └── object-assign@4.1.1 -
cd /opt/iobroker npm cache clear --force iobroker add i2c --debugBitte immer vollständig aus der Konsole kopieren, inkl. log in prompt usw.
-
@thomas-braun Das löschen des Caches scheint auch nichts zu bringen.
pi@raspberrypi4-iob:/opt/iobroker $ npm cache clear --force npm WARN using --force Recommended protections disabled. pi@raspberrypi4-iob:/opt/iobroker $ iobroker add i2c auto --debug NPM version: 8.19.3 Installing iobroker.i2c@1.2.1... (System call) npm ERR! code 1 npm ERR! path /opt/iobroker/node_modules/i2c-bus npm ERR! command failed npm ERR! command sh -c -- node-gyp rebuild npm ERR! node:internal/modules/cjs/loader:1024 npm ERR! throw err; npm ERR! ^ npm ERR! npm ERR! Error: Cannot find module 'object-assign' npm ERR! Require stack: npm ERR! - /usr/lib/node_modules/npm/node_modules/node-gyp/node_modules/gauge/render-template.js npm ERR! - /usr/lib/node_modules/npm/node_modules/node-gyp/node_modules/gauge/plumbing.js npm ERR! - /usr/lib/node_modules/npm/node_modules/node-gyp/node_modules/gauge/index.js npm ERR! - /usr/lib/node_modules/npm/node_modules/node-gyp/node_modules/npmlog/log.js npm ERR! - /usr/lib/node_modules/npm/node_modules/node-gyp/lib/node-gyp.js npm ERR! - /usr/lib/node_modules/npm/node_modules/node-gyp/bin/node-gyp.js npm ERR! at Function.Module._resolveFilename (node:internal/modules/cjs/loader:1021:15) npm ERR! at Function.Module._load (node:internal/modules/cjs/loader:866:27) npm ERR! at Module.require (node:internal/modules/cjs/loader:1093:19) npm ERR! at require (node:internal/modules/cjs/helpers:108:18) npm ERR! at Object.<anonymous> (/usr/lib/node_modules/npm/node_modules/node-gyp/node_modules/gauge/r ender-template.js:4:20) npm ERR! at Module._compile (node:internal/modules/cjs/loader:1191:14) npm ERR! at Object.Module._extensions..js (node:internal/modules/cjs/loader:1245:10) npm ERR! at Module.load (node:internal/modules/cjs/loader:1069:32) npm ERR! at Function.Module._load (node:internal/modules/cjs/loader:904:12) npm ERR! at Module.require (node:internal/modules/cjs/loader:1093:19) { npm ERR! code: 'MODULE_NOT_FOUND', npm ERR! requireStack: [ npm ERR! '/usr/lib/node_modules/npm/node_modules/node-gyp/node_modules/gauge/render-template.js', npm ERR! '/usr/lib/node_modules/npm/node_modules/node-gyp/node_modules/gauge/plumbing.js', npm ERR! '/usr/lib/node_modules/npm/node_modules/node-gyp/node_modules/gauge/index.js', npm ERR! '/usr/lib/node_modules/npm/node_modules/node-gyp/node_modules/npmlog/log.js', npm ERR! '/usr/lib/node_modules/npm/node_modules/node-gyp/lib/node-gyp.js', npm ERR! '/usr/lib/node_modules/npm/node_modules/node-gyp/bin/node-gyp.js' npm ERR! ] npm ERR! } npm ERR! A complete log of this run can be found in: npm ERR! /home/iobroker/.npm/_logs/2023-02-18T15_54_49_210Z-debug-0.log host.raspberrypi4-iob Cannot install iobroker.i2c@1.2.1: 1 -
@thomas-braun Bemerkung dazu: Ich habe davor iobroker nicht gestoppt. Ist das korrekt?
-
apt policy npm node-gyp nodejs
