Adapter: SMA SEMP
-
@webwanze Die Fehlermeldung sagt, dass auf einen Datenpunkt, den der Adapter eigentlich anlegt, nicht zugegriffen werden kann...
Zeige mal den Datenbaum für dein neues Device. Der sollte irgendwie so aussehen:
Bei dir fehlt wohl der State...
Wie heisst dein device? sind da evtl. Leerzeichen drin? -
@rene_hm
Datenpunkt passt. Mit State usw.
Leerzeichen gibt es auch nicht.
Auch wenn ich auf 'Schätzung' stelle, kommt der Fehler. Also ohne jeglichen Datenpunkte.Nochmal zum Reproduzieren:
Ausgangssituation:- Adapter installiert und Basiseinstellungen (IP, Port, ...) OK.
- Kein Device konfiguriert
-> Läuft!
Hinzufügen eines Devices:
- '+' klicken
- ID: F-00...-00...1-00 lassen
- Name: newDevice0 lassen
- Speichern
-> Läuft nicht mehr.
Zurück zur Konfiguration des Devices:
- Hersteller=ACME/Seriennummer=1234/Gerätetyp=Heizung/Mindestleistung=0;max. Leistung 1000; Unterbrechung erlaubt=Nein
- Zähler=Schätzung
- Schalter=Immer an; Gerät kann ein/ausgeschaltet werden=Nein
- Energieanforderungen aktiv = Nein
-> Läuft nicht
Habe auch versucht, alle möglichen Datenpunkte im Device zu setzen, falls der Adapter dort Daten holen will, auch wenn die Funktionalität eigentlich deaktiviert ist. Egal was ich einstelle, es funktioniert nicht. Sobald ich das gesamte Device deaktiviere (Checkbox) läuft der Adapter wieder.
Nachtrag:
In den Objekten werden wie bei deinem Screenshot alle Datenpunkte angezeigt:
Changed = null
Energy = 0 Wh
RecommendedState = null
State = null -
@webwanze sagte in Adapter: SMA SEMP:
State = null
und da sehen wir das Problem. Der Adapter versucht "waiting" dorthin zu schreiben, null sollte da nicht stehen...
Kopiere mal den kompletten Namen dieses Datenpunktes und poste ihn hier oder mache einen screen shot wie ich ihn gezeigt habe.
-
Muss bei mir da auch 'waiting' stehen?
Ich will ja nicht über semp steuern lassen. Also wartet bei mir auch nix - zumindest nicht auf den HM2. -
@webwanze ja, da wird auch "waiting" stehen, weil das der Standard-Zustand ist.
Ich sehe den Absturz auch im sentry (36 mal heute, 28 mal gestern, aber nur bei dir) , kann es mir aber noch nicht erklären.
Ich habe mal eine kleine Änderung eingebaut und auf github hochgeladen. Kannst du den Adapter von https://github.com/rg-engineering/ioBroker.semp installieren und debug-loglevel einschalten? Vielleicht sehen wir dann etwas mehr im log... -
2023-03-10 20:56:58.669 - info: host.ioBroker "system.adapter.semp.0" enabled 2023-03-10 20:56:58.704 - info: host.ioBroker instance system.adapter.semp.0 started with pid 52584 2023-03-10 20:56:59.337 - debug: semp.0 (52584) Redis Objects: Use Redis connection: 127.0.0.1:9001 2023-03-10 20:56:59.359 - debug: semp.0 (52584) Objects client ready ... initialize now 2023-03-10 20:56:59.360 - debug: semp.0 (52584) Objects create System PubSub Client 2023-03-10 20:56:59.361 - debug: semp.0 (52584) Objects create User PubSub Client 2023-03-10 20:56:59.375 - debug: semp.0 (52584) Objects client initialize lua scripts 2023-03-10 20:56:59.379 - debug: semp.0 (52584) Objects connected to redis: 127.0.0.1:9001 2023-03-10 20:56:59.390 - debug: semp.0 (52584) Redis States: Use Redis connection: 127.0.0.1:9000 2023-03-10 20:56:59.395 - debug: semp.0 (52584) States create System PubSub Client 2023-03-10 20:56:59.396 - debug: semp.0 (52584) States create User PubSub Client 2023-03-10 20:56:59.403 - debug: semp.0 (52584) States connected to redis: 127.0.0.1:9000 2023-03-10 20:56:59.428 - debug: semp.0 (52584) Plugin sentry Initialize Plugin (enabled=true) 2023-03-10 20:56:59.609 - info: semp.0 (52584) starting. Version 0.3.1 (non-npm: rg-engineering/ioBroker.semp#dedf941c7e0615cb00f7c78d6024a7b4a006eb1a) in /opt/iobroker/node_modules/iobroker.semp, node: v16.19.0, js-controller: 4.0.24 2023-03-10 20:56:59.627 - debug: semp.0 (52584) SSDPServer created: http://192.168.1.2:9765/description.xml e27c0561-11b3-47b8-a98a-006d408b0dd1 2023-03-10 20:56:59.632 - debug: semp.0 (52584) SEMPServer created 2023-03-10 20:56:59.632 - debug: semp.0 (52584) gateway created... 2023-03-10 20:56:59.635 - debug: semp.0 (52584) SEMP server listening on 9765 2023-03-10 20:56:59.638 - debug: semp.0 (52584) SSDPServer started 2023-03-10 20:56:59.638 - debug: semp.0 (52584) gateway started... 2023-03-10 20:56:59.638 - debug: semp.0 (52584) Started all! 2023-03-10 20:56:59.638 - debug: semp.0 (52584) add device {"IsActive":true,"ID":"F-00000000-000000000001-00","Name":"newDevice0","Vendor":"ACME","Type":"Heater","SerialNr":"1234","MaxPower":"1000","MinPower":"0","InterruptionsAllowed":false,"MinOnTime":"","MaxOnTime":"","MinOffTime":"","MaxOffTime":"","MeasurementMethod":"Measurement","OID_Power":"0_userdata.0.DEVICES.ECENTRALHEATING_P","MeasurementUnit":"W","BatteryCapacity":"","WallboxHas3phaseEnabler":false,"StatusDetection":"AlwaysOn","StatusDetectionLimit":0,"StatusDetectionLimitTimeOn":0,"StatusDetectionLimitTimeOff":0,"StatusDetectionMinRunTime":0,"OID_Status":"","HasOIDSwitch":false,"OID_Switch":"","SwitchOffAtEndOfTimer":false,"TimerActive":false,"TimerCancelIfNotOn":false,"TimerCancelIfNotOnTime":0,"EnergyRequestPeriods":[{"ID":"1","Days":"","EarliestStartTime":"","LatestEndTime":"","MinRunTime":"","MaxRunTime":""}],"WallboxOIDs":[{"active":true,"must":"obligatorisch","Name":"DeviceOIDPlugConnected","OID":"","Type":"Boolean","SetValue":"true"},{"active":false,"must":"optional","Name":"DeviceOIDIsCharging","OID":"","Type":"Boolean","SetValue":"true"},{"active":false,"must":"optional","Name":"DeviceOIDIsError","OID":"","Type":"Boolean","SetValue":"true"},{"active":true,"must":"obligatorisch","Name":"DeviceOIDChargePower","OID":"","Type":"Number","SetValue":"0"},{"active":false,"must":"optional","Name":"DeviceOIDStartCharge","OID":"","Type":"Boolean","SetValue":"true"},{"active":false,"must":"optional","Name":"DeviceOIDStopCharge","OID":"","Type":"Boolean","SetValue":"true"}]} 2023-03-10 20:56:59.639 - debug: semp.0 (52584) add device F-00000000-000000000001-00 2023-03-10 20:56:59.640 - debug: semp.0 (52584) can use optional energy: false 2023-03-10 20:56:59.640 - debug: semp.0 (52584) subscribe OID_Power 0_userdata.0.DEVICES.ECENTRALHEATING_P 2023-03-10 20:56:59.642 - info: semp.0 (52584) device created F-00000000-000000000001-00 newDevice0 2023-03-10 20:56:59.643 - debug: semp.0 (52584) set device 2023-03-10 20:56:59.643 - debug: semp.0 (52584) newDevice0 setState On 2023-03-10 20:56:59.644 - debug: semp.0 (52584) UpdateData 2023-03-10 20:56:59.644 - debug: semp.0 (52584) device {"IsActive":true,"ID":"F-00000000-000000000001-00","Name":"newDevice0","Vendor":"ACME","Type":"Heater","SerialNr":"1234","MaxPower":"1000","MinPower":"0","InterruptionsAllowed":false,"MinOnTime":"","MaxOnTime":"","MinOffTime":"","MaxOffTime":"","MeasurementMethod":"Measurement","OID_Power":"0_userdata.0.DEVICES.ECENTRALHEATING_P","MeasurementUnit":"W","BatteryCapacity":"","WallboxHas3phaseEnabler":false,"StatusDetection":"AlwaysOn","StatusDetectionLimit":0,"StatusDetectionLimitTimeOn":0,"StatusDetectionLimitTimeOff":0,"StatusDetectionMinRunTime":0,"OID_Status":"","HasOIDSwitch":false,"OID_Switch":"","SwitchOffAtEndOfTimer":false,"TimerActive":false,"TimerCancelIfNotOn":false,"TimerCancelIfNotOnTime":0,"EnergyRequestPeriods":[{"ID":"1","Days":"","EarliestStartTime":"","LatestEndTime":"","MinRunTime":"","MaxRunTime":""}],"WallboxOIDs":[{"active":true,"must":"obligatorisch","Name":"DeviceOIDPlugConnected","OID":"","Type":"Boolean","SetValue":"true"},{"active":false,"must":"optional","Name":"DeviceOIDIsCharging","OID":"","Type":"Boolean","SetValue":"true"},{"active":false,"must":"optional","Name":"DeviceOIDIsError","OID":"","Type":"Boolean","SetValue":"true"},{"active":true,"must":"obligatorisch","Name":"DeviceOIDChargePower","OID":"","Type":"Number","SetValue":"0"},{"active":false,"must":"optional","Name":"DeviceOIDStartCharge","OID":"","Type":"Boolean","SetValue":"true"},{"active":false,"must":"optional","Name":"DeviceOIDStopCharge","OID":"","Type":"Boolean","SetValue":"true"}],"OptionalEnergy":false} 2023-03-10 20:56:59.644 - debug: semp.0 (52584) result [{"ID":"1","Days":"","EarliestStartTime":"","LatestEndTime":"","MinRunTime":"","MaxRunTime":""}] 2023-03-10 20:56:59.644 - debug: semp.0 (52584) result [{"IsActive":true,"ID":"F-00000000-000000000001-00","Name":"newDevice0","Vendor":"ACME","Type":"Heater","SerialNr":"1234","MaxPower":"1000","MinPower":"0","InterruptionsAllowed":false,"MinOnTime":"","MaxOnTime":"","MinOffTime":"","MaxOffTime":"","MeasurementMethod":"Measurement","OID_Power":"0_userdata.0.DEVICES.ECENTRALHEATING_P","MeasurementUnit":"W","BatteryCapacity":"","WallboxHas3phaseEnabler":false,"StatusDetection":"AlwaysOn","StatusDetectionLimit":0,"StatusDetectionLimitTimeOn":0,"StatusDetectionLimitTimeOff":0,"StatusDetectionMinRunTime":0,"OID_Status":"","HasOIDSwitch":false,"OID_Switch":"","SwitchOffAtEndOfTimer":false,"TimerActive":false,"TimerCancelIfNotOn":false,"TimerCancelIfNotOnTime":0,"EnergyRequestPeriods":[{"ID":"1","Days":"","EarliestStartTime":"","LatestEndTime":"","MinRunTime":"","MaxRunTime":""}],"WallboxOIDs":[{"active":true,"must":"obligatorisch","Name":"DeviceOIDPlugConnected","OID":"","Type":"Boolean","SetValue":"true"},{"active":false,"must":"optional","Name":"DeviceOIDIsCharging","OID":"","Type":"Boolean","SetValue":"true"},{"active":false,"must":"optional","Name":"DeviceOIDIsError","OID":"","Type":"Boolean","SetValue":"true"},{"active":true,"must":"obligatorisch","Name":"DeviceOIDChargePower","OID":"","Type":"Number","SetValue":"0"},{"active":false,"must":"optional","Name":"DeviceOIDStartCharge","OID":"","Type":"Boolean","SetValue":"true"},{"active":false,"must":"optional","Name":"DeviceOIDStopCharge","OID":"","Type":"Boolean","SetValue":"true"}],"OptionalEnergy":false}] 2023-03-10 20:56:59.655 - debug: semp.0 (52584) newDevice0 setLastPower 33 number AlwaysOn W 2023-03-10 20:56:59.658 - debug: semp.0 (52584) newDevice0 got null from Devices.newDevice0.State 2023-03-10 20:56:59.659 - error: semp.0 (52584) Unhandled promise rejection. This error originated either by throwing inside of an async function without a catch block, or by rejecting a promise which was not handled with .catch(). 2023-03-10 20:56:59.659 - error: semp.0 (52584) unhandled promise rejection: Cannot read properties of null (reading 'val') 2023-03-10 20:56:59.663 - error: semp.0 (52584) TypeError: Cannot read properties of null (reading 'val') at Device.SetState (/opt/iobroker/node_modules/iobroker.semp/lib/semp/Device.js:1052:30) 2023-03-10 20:56:59.663 - error: semp.0 (52584) Cannot read properties of null (reading 'val') 2023-03-10 20:56:59.676 - debug: semp.0 (52584) newDevice0 got null from Devices.newDevice0.State 2023-03-10 20:56:59.677 - error: semp.0 (52584) Unhandled promise rejection. This error originated either by throwing inside of an async function without a catch block, or by rejecting a promise which was not handled with .catch(). 2023-03-10 20:56:59.677 - error: semp.0 (52584) unhandled promise rejection: Cannot read properties of null (reading 'val') 2023-03-10 20:56:59.678 - error: semp.0 (52584) TypeError: Cannot read properties of null (reading 'val') at Device.SetState (/opt/iobroker/node_modules/iobroker.semp/lib/semp/Device.js:1052:30) at runNextTicks (node:internal/process/task_queues:61:5) at processImmediate (node:internal/timers:437:9) 2023-03-10 20:56:59.679 - error: semp.0 (52584) Cannot read properties of null (reading 'val') 2023-03-10 20:56:59.683 - debug: semp.0 (52584) delete all devices 2023-03-10 20:56:59.683 - debug: semp.0 (52584) SEMP server stopped 2023-03-10 20:56:59.684 - info: semp.0 (52584) terminating 2023-03-10 20:56:59.685 - debug: semp.0 (52584) Plugin sentry destroyed 2023-03-10 20:56:59.685 - warn: semp.0 (52584) Terminated (UNCAUGHT_EXCEPTION): Without reason 2023-03-10 20:56:59.689 - debug: semp.0 (52584) SSDPServer stopped 2023-03-10 20:56:59.689 - debug: semp.0 (52584) gateway stopped... 2023-03-10 20:57:00.225 - error: host.ioBroker Caught by controller[0]: This error originated either by throwing inside of an async function without a catch block, or by rejecting a promise which was not handled with .catch(). The promise rejected with the reason: 2023-03-10 20:57:00.226 - error: host.ioBroker Caught by controller[1]: TypeError: Cannot read properties of null (reading 'val') 2023-03-10 20:57:00.226 - error: host.ioBroker Caught by controller[1]: at Device.SetState (/opt/iobroker/node_modules/iobroker.semp/lib/semp/Device.js:1052:30) 2023-03-10 20:57:00.226 - error: host.ioBroker Caught by controller[2]: This error originated either by throwing inside of an async function without a catch block, or by rejecting a promise which was not handled with .catch(). The promise rejected with the reason: 2023-03-10 20:57:00.226 - error: host.ioBroker Caught by controller[2]: TypeError: Cannot read properties of null (reading 'val') 2023-03-10 20:57:00.226 - error: host.ioBroker Caught by controller[2]: at Device.SetState (/opt/iobroker/node_modules/iobroker.semp/lib/semp/Device.js:1052:30) 2023-03-10 20:57:00.226 - error: host.ioBroker Caught by controller[2]: at runNextTicks (node:internal/process/task_queues:61:5) 2023-03-10 20:57:00.226 - error: host.ioBroker Caught by controller[2]: at processImmediate (node:internal/timers:437:9) 2023-03-10 20:57:00.226 - error: host.ioBroker instance system.adapter.semp.0 terminated with code 6 (UNCAUGHT_EXCEPTION) 2023-03-10 20:57:00.226 - info: host.ioBroker Restart adapter system.adapter.semp.0 because enabled 2023-03-10 20:57:30.259 - info: host.ioBroker instance system.adapter.semp.0 started with pid 52599 2023-03-10 20:57:30.854 - debug: semp.0 (52599) Redis Objects: Use Redis connection: 127.0.0.1:9001 2023-03-10 20:57:30.877 - debug: semp.0 (52599) Objects client ready ... initialize now 2023-03-10 20:57:30.878 - debug: semp.0 (52599) Objects create System PubSub Client 2023-03-10 20:57:30.879 - debug: semp.0 (52599) Objects create User PubSub Client 2023-03-10 20:57:30.895 - debug: semp.0 (52599) Objects client initialize lua scripts 2023-03-10 20:57:30.898 - debug: semp.0 (52599) Objects connected to redis: 127.0.0.1:9001 2023-03-10 20:57:30.911 - debug: semp.0 (52599) Redis States: Use Redis connection: 127.0.0.1:9000 2023-03-10 20:57:30.916 - debug: semp.0 (52599) States create System PubSub Client 2023-03-10 20:57:30.917 - debug: semp.0 (52599) States create User PubSub Client 2023-03-10 20:57:30.925 - debug: semp.0 (52599) States connected to redis: 127.0.0.1:9000 2023-03-10 20:57:30.948 - debug: semp.0 (52599) Plugin sentry Initialize Plugin (enabled=true) 2023-03-10 20:57:31.103 - info: semp.0 (52599) starting. Version 0.3.1 (non-npm: rg-engineering/ioBroker.semp#dedf941c7e0615cb00f7c78d6024a7b4a006eb1a) in /opt/iobroker/node_modules/iobroker.semp, node: v16.19.0, js-controller: 4.0.24 2023-03-10 20:57:31.121 - debug: semp.0 (52599) SSDPServer created: http://192.168.1.2:9765/description.xml e27c0561-11b3-47b8-a98a-006d408b0dd1 2023-03-10 20:57:31.125 - debug: semp.0 (52599) SEMPServer created 2023-03-10 20:57:31.126 - debug: semp.0 (52599) gateway created... 2023-03-10 20:57:31.129 - debug: semp.0 (52599) SEMP server listening on 9765 2023-03-10 20:57:31.132 - debug: semp.0 (52599) SSDPServer started 2023-03-10 20:57:31.132 - debug: semp.0 (52599) gateway started... 2023-03-10 20:57:31.132 - debug: semp.0 (52599) Started all! 2023-03-10 20:57:31.132 - debug: semp.0 (52599) add device {"IsActive":true,"ID":"F-00000000-000000000001-00","Name":"newDevice0","Vendor":"ACME","Type":"Heater","SerialNr":"1234","MaxPower":"1000","MinPower":"0","InterruptionsAllowed":false,"MinOnTime":"","MaxOnTime":"","MinOffTime":"","MaxOffTime":"","MeasurementMethod":"Measurement","OID_Power":"0_userdata.0.DEVICES.ECENTRALHEATING_P","MeasurementUnit":"W","BatteryCapacity":"","WallboxHas3phaseEnabler":false,"StatusDetection":"AlwaysOn","StatusDetectionLimit":0,"StatusDetectionLimitTimeOn":0,"StatusDetectionLimitTimeOff":0,"StatusDetectionMinRunTime":0,"OID_Status":"","HasOIDSwitch":false,"OID_Switch":"","SwitchOffAtEndOfTimer":false,"TimerActive":false,"TimerCancelIfNotOn":false,"TimerCancelIfNotOnTime":0,"EnergyRequestPeriods":[{"ID":"1","Days":"","EarliestStartTime":"","LatestEndTime":"","MinRunTime":"","MaxRunTime":""}],"WallboxOIDs":[{"active":true,"must":"obligatorisch","Name":"DeviceOIDPlugConnected","OID":"","Type":"Boolean","SetValue":"true"},{"active":false,"must":"optional","Name":"DeviceOIDIsCharging","OID":"","Type":"Boolean","SetValue":"true"},{"active":false,"must":"optional","Name":"DeviceOIDIsError","OID":"","Type":"Boolean","SetValue":"true"},{"active":true,"must":"obligatorisch","Name":"DeviceOIDChargePower","OID":"","Type":"Number","SetValue":"0"},{"active":false,"must":"optional","Name":"DeviceOIDStartCharge","OID":"","Type":"Boolean","SetValue":"true"},{"active":false,"must":"optional","Name":"DeviceOIDStopCharge","OID":"","Type":"Boolean","SetValue":"true"}]} 2023-03-10 20:57:31.133 - debug: semp.0 (52599) add device F-00000000-000000000001-00 2023-03-10 20:57:31.134 - debug: semp.0 (52599) can use optional energy: false 2023-03-10 20:57:31.134 - debug: semp.0 (52599) subscribe OID_Power 0_userdata.0.DEVICES.ECENTRALHEATING_P 2023-03-10 20:57:31.136 - info: semp.0 (52599) device created F-00000000-000000000001-00 newDevice0 2023-03-10 20:57:31.137 - debug: semp.0 (52599) set device 2023-03-10 20:57:31.137 - debug: semp.0 (52599) newDevice0 setState On 2023-03-10 20:57:31.137 - debug: semp.0 (52599) UpdateData 2023-03-10 20:57:31.138 - debug: semp.0 (52599) device {"IsActive":true,"ID":"F-00000000-000000000001-00","Name":"newDevice0","Vendor":"ACME","Type":"Heater","SerialNr":"1234","MaxPower":"1000","MinPower":"0","InterruptionsAllowed":false,"MinOnTime":"","MaxOnTime":"","MinOffTime":"","MaxOffTime":"","MeasurementMethod":"Measurement","OID_Power":"0_userdata.0.DEVICES.ECENTRALHEATING_P","MeasurementUnit":"W","BatteryCapacity":"","WallboxHas3phaseEnabler":false,"StatusDetection":"AlwaysOn","StatusDetectionLimit":0,"StatusDetectionLimitTimeOn":0,"StatusDetectionLimitTimeOff":0,"StatusDetectionMinRunTime":0,"OID_Status":"","HasOIDSwitch":false,"OID_Switch":"","SwitchOffAtEndOfTimer":false,"TimerActive":false,"TimerCancelIfNotOn":false,"TimerCancelIfNotOnTime":0,"EnergyRequestPeriods":[{"ID":"1","Days":"","EarliestStartTime":"","LatestEndTime":"","MinRunTime":"","MaxRunTime":""}],"WallboxOIDs":[{"active":true,"must":"obligatorisch","Name":"DeviceOIDPlugConnected","OID":"","Type":"Boolean","SetValue":"true"},{"active":false,"must":"optional","Name":"DeviceOIDIsCharging","OID":"","Type":"Boolean","SetValue":"true"},{"active":false,"must":"optional","Name":"DeviceOIDIsError","OID":"","Type":"Boolean","SetValue":"true"},{"active":true,"must":"obligatorisch","Name":"DeviceOIDChargePower","OID":"","Type":"Number","SetValue":"0"},{"active":false,"must":"optional","Name":"DeviceOIDStartCharge","OID":"","Type":"Boolean","SetValue":"true"},{"active":false,"must":"optional","Name":"DeviceOIDStopCharge","OID":"","Type":"Boolean","SetValue":"true"}],"OptionalEnergy":false} 2023-03-10 20:57:31.138 - debug: semp.0 (52599) result [{"ID":"1","Days":"","EarliestStartTime":"","LatestEndTime":"","MinRunTime":"","MaxRunTime":""}] 2023-03-10 20:57:31.138 - debug: semp.0 (52599) result [{"IsActive":true,"ID":"F-00000000-000000000001-00","Name":"newDevice0","Vendor":"ACME","Type":"Heater","SerialNr":"1234","MaxPower":"1000","MinPower":"0","InterruptionsAllowed":false,"MinOnTime":"","MaxOnTime":"","MinOffTime":"","MaxOffTime":"","MeasurementMethod":"Measurement","OID_Power":"0_userdata.0.DEVICES.ECENTRALHEATING_P","MeasurementUnit":"W","BatteryCapacity":"","WallboxHas3phaseEnabler":false,"StatusDetection":"AlwaysOn","StatusDetectionLimit":0,"StatusDetectionLimitTimeOn":0,"StatusDetectionLimitTimeOff":0,"StatusDetectionMinRunTime":0,"OID_Status":"","HasOIDSwitch":false,"OID_Switch":"","SwitchOffAtEndOfTimer":false,"TimerActive":false,"TimerCancelIfNotOn":false,"TimerCancelIfNotOnTime":0,"EnergyRequestPeriods":[{"ID":"1","Days":"","EarliestStartTime":"","LatestEndTime":"","MinRunTime":"","MaxRunTime":""}],"WallboxOIDs":[{"active":true,"must":"obligatorisch","Name":"DeviceOIDPlugConnected","OID":"","Type":"Boolean","SetValue":"true"},{"active":false,"must":"optional","Name":"DeviceOIDIsCharging","OID":"","Type":"Boolean","SetValue":"true"},{"active":false,"must":"optional","Name":"DeviceOIDIsError","OID":"","Type":"Boolean","SetValue":"true"},{"active":true,"must":"obligatorisch","Name":"DeviceOIDChargePower","OID":"","Type":"Number","SetValue":"0"},{"active":false,"must":"optional","Name":"DeviceOIDStartCharge","OID":"","Type":"Boolean","SetValue":"true"},{"active":false,"must":"optional","Name":"DeviceOIDStopCharge","OID":"","Type":"Boolean","SetValue":"true"}],"OptionalEnergy":false}] 2023-03-10 20:57:31.148 - debug: semp.0 (52599) newDevice0 setLastPower 33 number AlwaysOn W 2023-03-10 20:57:31.150 - debug: semp.0 (52599) newDevice0 got null from Devices.newDevice0.State 2023-03-10 20:57:31.151 - error: semp.0 (52599) Unhandled promise rejection. This error originated either by throwing inside of an async function without a catch block, or by rejecting a promise which was not handled with .catch(). 2023-03-10 20:57:31.151 - error: semp.0 (52599) unhandled promise rejection: Cannot read properties of null (reading 'val') 2023-03-10 20:57:31.154 - error: semp.0 (52599) TypeError: Cannot read properties of null (reading 'val') at Device.SetState (/opt/iobroker/node_modules/iobroker.semp/lib/semp/Device.js:1052:30) 2023-03-10 20:57:31.154 - error: semp.0 (52599) Cannot read properties of null (reading 'val') 2023-03-10 20:57:31.166 - debug: semp.0 (52599) newDevice0 got null from Devices.newDevice0.State 2023-03-10 20:57:31.166 - error: semp.0 (52599) Unhandled promise rejection. This error originated either by throwing inside of an async function without a catch block, or by rejecting a promise which was not handled with .catch(). 2023-03-10 20:57:31.166 - error: semp.0 (52599) unhandled promise rejection: Cannot read properties of null (reading 'val') 2023-03-10 20:57:31.167 - error: semp.0 (52599) TypeError: Cannot read properties of null (reading 'val') at Device.SetState (/opt/iobroker/node_modules/iobroker.semp/lib/semp/Device.js:1052:30) at runNextTicks (node:internal/process/task_queues:61:5) at processImmediate (node:internal/timers:437:9) 2023-03-10 20:57:31.168 - error: semp.0 (52599) Cannot read properties of null (reading 'val') 2023-03-10 20:57:31.171 - debug: semp.0 (52599) delete all devices 2023-03-10 20:57:31.171 - debug: semp.0 (52599) SEMP server stopped 2023-03-10 20:57:31.172 - info: semp.0 (52599) terminating 2023-03-10 20:57:31.172 - debug: semp.0 (52599) Plugin sentry destroyed 2023-03-10 20:57:31.172 - warn: semp.0 (52599) Terminated (UNCAUGHT_EXCEPTION): Without reason 2023-03-10 20:57:31.175 - debug: semp.0 (52599) SSDPServer stopped 2023-03-10 20:57:31.176 - debug: semp.0 (52599) gateway stopped... 2023-03-10 20:57:31.720 - error: host.ioBroker Caught by controller[0]: This error originated either by throwing inside of an async function without a catch block, or by rejecting a promise which was not handled with .catch(). The promise rejected with the reason: 2023-03-10 20:57:31.720 - error: host.ioBroker Caught by controller[1]: TypeError: Cannot read properties of null (reading 'val') 2023-03-10 20:57:31.720 - error: host.ioBroker Caught by controller[1]: at Device.SetState (/opt/iobroker/node_modules/iobroker.semp/lib/semp/Device.js:1052:30) 2023-03-10 20:57:31.720 - error: host.ioBroker Caught by controller[2]: This error originated either by throwing inside of an async function without a catch block, or by rejecting a promise which was not handled with .catch(). The promise rejected with the reason: 2023-03-10 20:57:31.720 - error: host.ioBroker Caught by controller[2]: TypeError: Cannot read properties of null (reading 'val') 2023-03-10 20:57:31.720 - error: host.ioBroker Caught by controller[2]: at Device.SetState (/opt/iobroker/node_modules/iobroker.semp/lib/semp/Device.js:1052:30) 2023-03-10 20:57:31.720 - error: host.ioBroker Caught by controller[2]: at runNextTicks (node:internal/process/task_queues:61:5) 2023-03-10 20:57:31.720 - error: host.ioBroker Caught by controller[2]: at processImmediate (node:internal/timers:437:9) 2023-03-10 20:57:31.720 - error: host.ioBroker instance system.adapter.semp.0 terminated with code 6 (UNCAUGHT_EXCEPTION) 2023-03-10 20:57:31.721 - info: host.ioBroker Restart adapter system.adapter.semp.0 because enabled -
@webwanze Das log sieht eigentlich gut aus, trotzdem funktioniert das ganze bei dir nicht.
Ich habe nochmal ein paar logs hinzugefügt. Kannst du bitte nochmal von github (wie oben) installieren? -
Hallo,
die Instanz wird jetzt grün:
2023-03-11 09:55:55.393 - info: host.ioBroker "system.adapter.semp.0" enabled 2023-03-11 09:55:55.426 - info: host.ioBroker instance system.adapter.semp.0 started with pid 53629 2023-03-11 09:55:56.057 - debug: semp.0 (53629) Redis Objects: Use Redis connection: 127.0.0.1:9001 2023-03-11 09:55:56.076 - debug: semp.0 (53629) Objects client ready ... initialize now 2023-03-11 09:55:56.078 - debug: semp.0 (53629) Objects create System PubSub Client 2023-03-11 09:55:56.078 - debug: semp.0 (53629) Objects create User PubSub Client 2023-03-11 09:55:56.099 - debug: semp.0 (53629) Objects client initialize lua scripts 2023-03-11 09:55:56.103 - debug: semp.0 (53629) Objects connected to redis: 127.0.0.1:9001 2023-03-11 09:55:56.114 - debug: semp.0 (53629) Redis States: Use Redis connection: 127.0.0.1:9000 2023-03-11 09:55:56.120 - debug: semp.0 (53629) States create System PubSub Client 2023-03-11 09:55:56.121 - debug: semp.0 (53629) States create User PubSub Client 2023-03-11 09:55:56.128 - debug: semp.0 (53629) States connected to redis: 127.0.0.1:9000 2023-03-11 09:55:56.154 - debug: semp.0 (53629) Plugin sentry Initialize Plugin (enabled=true) 2023-03-11 09:55:56.299 - info: semp.0 (53629) starting. Version 0.3.1 (non-npm: rg-engineering/ioBroker.semp#6225ab9cb4be90b2b25f1f20179f6e884e287309) in /opt/iobroker/node_modules/iobroker.semp, node: v16.19.0, js-controller: 4.0.24 2023-03-11 09:55:56.317 - debug: semp.0 (53629) SSDPServer created: http://192.168.1.2:9765/description.xml ba7895e3-74c6-47ee-a912-e544105b6f50 2023-03-11 09:55:56.322 - debug: semp.0 (53629) SEMPServer created 2023-03-11 09:55:56.322 - debug: semp.0 (53629) gateway created... 2023-03-11 09:55:56.325 - debug: semp.0 (53629) SEMP server listening on 9765 2023-03-11 09:55:56.328 - debug: semp.0 (53629) SSDPServer started 2023-03-11 09:55:56.328 - debug: semp.0 (53629) gateway started... 2023-03-11 09:55:56.328 - debug: semp.0 (53629) Started all! 2023-03-11 09:55:56.328 - debug: semp.0 (53629) add device {"IsActive":true,"ID":"F-0-000000000001-00","Name":"newDevice0","Vendor":"ACME","Type":"Heater","SerialNr":"1234","MaxPower":"1000","MinPower":"0","InterruptionsAllowed":false,"MinOnTime":"","MaxOnTime":"","MinOffTime":"","MaxOffTime":"","MeasurementMethod":"Measurement","OID_Power":"0_userdata.0.DEVICES.ECENTRALHEATING_P","MeasurementUnit":"W","BatteryCapacity":"","WallboxHas3phaseEnabler":false,"StatusDetection":"AlwaysOn","StatusDetectionLimit":0,"StatusDetectionLimitTimeOn":0,"StatusDetectionLimitTimeOff":0,"StatusDetectionMinRunTime":0,"OID_Status":"","HasOIDSwitch":false,"OID_Switch":"","SwitchOffAtEndOfTimer":false,"TimerActive":false,"TimerCancelIfNotOn":false,"TimerCancelIfNotOnTime":0,"EnergyRequestPeriods":[{"ID":"1","Days":"","EarliestStartTime":"","LatestEndTime":"","MinRunTime":"","MaxRunTime":""}],"WallboxOIDs":[{"active":true,"must":"obligatorisch","Name":"DeviceOIDPlugConnected","OID":"","Type":"Boolean","SetValue":"true"},{"active":false,"must":"optional","Name":"DeviceOIDIsCharging","OID":"","Type":"Boolean","SetValue":"true"},{"active":false,"must":"optional","Name":"DeviceOIDIsError","OID":"","Type":"Boolean","SetValue":"true"},{"active":true,"must":"obligatorisch","Name":"DeviceOIDChargePower","OID":"","Type":"Number","SetValue":"0"},{"active":false,"must":"optional","Name":"DeviceOIDStartCharge","OID":"","Type":"Boolean","SetValue":"true"},{"active":false,"must":"optional","Name":"DeviceOIDStopCharge","OID":"","Type":"Boolean","SetValue":"true"}]} 2023-03-11 09:55:56.329 - debug: semp.0 (53629) add device F-0-000000000001-00 2023-03-11 09:55:56.330 - error: semp.0 (53629) newDevice0 wrong device id F-0-000000000001-00! must follow F-xxxxxxxx-yyyyyyyyyyyy-zz 2023-03-11 09:55:56.330 - debug: semp.0 (53629) can use optional energy: false 2023-03-11 09:55:56.330 - debug: semp.0 (53629) subscribe OID_Power 0_userdata.0.DEVICES.ECENTRALHEATING_P 2023-03-11 09:55:56.332 - info: semp.0 (53629) device created F-0-000000000001-00 newDevice0 2023-03-11 09:55:56.333 - debug: semp.0 (53629) set device 2023-03-11 09:55:56.333 - debug: semp.0 (53629) newDevice0 setState On 2023-03-11 09:55:56.334 - debug: semp.0 (53629) UpdateData 2023-03-11 09:55:56.334 - debug: semp.0 (53629) device {"IsActive":true,"ID":"F-0-000000000001-00","Name":"newDevice0","Vendor":"ACME","Type":"Heater","SerialNr":"1234","MaxPower":"1000","MinPower":"0","InterruptionsAllowed":false,"MinOnTime":"","MaxOnTime":"","MinOffTime":"","MaxOffTime":"","MeasurementMethod":"Measurement","OID_Power":"0_userdata.0.DEVICES.ECENTRALHEATING_P","MeasurementUnit":"W","BatteryCapacity":"","WallboxHas3phaseEnabler":false,"StatusDetection":"AlwaysOn","StatusDetectionLimit":0,"StatusDetectionLimitTimeOn":0,"StatusDetectionLimitTimeOff":0,"StatusDetectionMinRunTime":0,"OID_Status":"","HasOIDSwitch":false,"OID_Switch":"","SwitchOffAtEndOfTimer":false,"TimerActive":false,"TimerCancelIfNotOn":false,"TimerCancelIfNotOnTime":0,"EnergyRequestPeriods":[{"ID":"1","Days":"","EarliestStartTime":"","LatestEndTime":"","MinRunTime":"","MaxRunTime":""}],"WallboxOIDs":[{"active":true,"must":"obligatorisch","Name":"DeviceOIDPlugConnected","OID":"","Type":"Boolean","SetValue":"true"},{"active":false,"must":"optional","Name":"DeviceOIDIsCharging","OID":"","Type":"Boolean","SetValue":"true"},{"active":false,"must":"optional","Name":"DeviceOIDIsError","OID":"","Type":"Boolean","SetValue":"true"},{"active":true,"must":"obligatorisch","Name":"DeviceOIDChargePower","OID":"","Type":"Number","SetValue":"0"},{"active":false,"must":"optional","Name":"DeviceOIDStartCharge","OID":"","Type":"Boolean","SetValue":"true"},{"active":false,"must":"optional","Name":"DeviceOIDStopCharge","OID":"","Type":"Boolean","SetValue":"true"}],"OptionalEnergy":false} 2023-03-11 09:55:56.334 - debug: semp.0 (53629) result [{"ID":"1","Days":"","EarliestStartTime":"","LatestEndTime":"","MinRunTime":"","MaxRunTime":""}] 2023-03-11 09:55:56.334 - debug: semp.0 (53629) result [{"IsActive":true,"ID":"F-0-000000000001-00","Name":"newDevice0","Vendor":"ACME","Type":"Heater","SerialNr":"1234","MaxPower":"1000","MinPower":"0","InterruptionsAllowed":false,"MinOnTime":"","MaxOnTime":"","MinOffTime":"","MaxOffTime":"","MeasurementMethod":"Measurement","OID_Power":"0_userdata.0.DEVICES.ECENTRALHEATING_P","MeasurementUnit":"W","BatteryCapacity":"","WallboxHas3phaseEnabler":false,"StatusDetection":"AlwaysOn","StatusDetectionLimit":0,"StatusDetectionLimitTimeOn":0,"StatusDetectionLimitTimeOff":0,"StatusDetectionMinRunTime":0,"OID_Status":"","HasOIDSwitch":false,"OID_Switch":"","SwitchOffAtEndOfTimer":false,"TimerActive":false,"TimerCancelIfNotOn":false,"TimerCancelIfNotOnTime":0,"EnergyRequestPeriods":[{"ID":"1","Days":"","EarliestStartTime":"","LatestEndTime":"","MinRunTime":"","MaxRunTime":""}],"WallboxOIDs":[{"active":true,"must":"obligatorisch","Name":"DeviceOIDPlugConnected","OID":"","Type":"Boolean","SetValue":"true"},{"active":false,"must":"optional","Name":"DeviceOIDIsCharging","OID":"","Type":"Boolean","SetValue":"true"},{"active":false,"must":"optional","Name":"DeviceOIDIsError","OID":"","Type":"Boolean","SetValue":"true"},{"active":true,"must":"obligatorisch","Name":"DeviceOIDChargePower","OID":"","Type":"Number","SetValue":"0"},{"active":false,"must":"optional","Name":"DeviceOIDStartCharge","OID":"","Type":"Boolean","SetValue":"true"},{"active":false,"must":"optional","Name":"DeviceOIDStopCharge","OID":"","Type":"Boolean","SetValue":"true"}],"OptionalEnergy":false}] 2023-03-11 09:55:56.348 - debug: semp.0 (53629) newDevice0 setLastPower 117 number AlwaysOn W 2023-03-11 09:55:56.350 - debug: semp.0 (53629) newDevice0 got null from Devices.newDevice0.State 2023-03-11 09:55:56.351 - error: semp.0 (53629) newDevice0 could not set state waiting on Devices.newDevice0.State 2023-03-11 09:55:56.354 - debug: semp.0 (53629) newDevice0 got null from Devices.newDevice0.State 2023-03-11 09:55:56.355 - error: semp.0 (53629) newDevice0 could not set state on on Devices.newDevice0.State 2023-03-11 09:55:56.357 - debug: semp.0 (53629) newDevice0 got object {"type":"state","common":{"name":"recommended state from SHM","type":"boolean","role":"state","read":true,"write":false},"from":"system.adapter.semp.0","user":"system.user.admin","ts":1678524926725,"_id":"semp.0.Devices.newDevice0.RecommendedState","acl":{"object":1636,"state":1636,"owner":"system.user.admin","ownerGroup":"system.group.administrator"}} 2023-03-11 09:55:56.381 - debug: semp.0 (53629) newDevice0 got object {"type":"state","common":{"name":"last time recommendation changed","type":"string","role":"value.time","read":true,"write":false},"from":"system.adapter.semp.0","user":"system.user.admin","ts":1678524926734,"_id":"semp.0.Devices.newDevice0.Changed","acl":{"object":1636,"state":1636,"owner":"system.user.admin","ownerGroup":"system.group.administrator"}} 2023-03-11 09:55:56.385 - debug: semp.0 (53629) newDevice0 got object {"type":"state","common":{"name":"current State","type":"string","role":"state","read":true,"write":false},"from":"system.adapter.semp.0","user":"system.user.admin","ts":1678524926738,"_id":"semp.0.Devices.newDevice0.State","acl":{"object":1636,"state":1636,"owner":"system.user.admin","ownerGroup":"system.group.administrator"}} 2023-03-11 09:55:56.386 - debug: semp.0 (53629) newDevice0 got object {"type":"state","common":{"name":"Energy used","type":"number","unit":"Wh","role":"value","read":true,"write":false},"from":"system.adapter.semp.0","user":"system.user.admin","ts":1678524926744,"_id":"semp.0.Devices.newDevice0.Energy","acl":{"object":1636,"state":1636,"owner":"system.user.admin","ownerGroup":"system.group.administrator"}} 2023-03-11 09:55:59.376 - debug: semp.0 (53629) SHM requested description 2023-03-11 09:55:59.377 - info: semp.0 (53629) adapter discovered by SHM 2023-03-11 09:56:00.033 - debug: semp.0 (53629) newDevice0 setLastPower 117 number AlwaysOn W 2023-03-11 09:56:00.033 - debug: semp.0 (53629) newDevice0 calc energy 117 1678524956349 = 0.11973000000000002Wh 2023-03-11 09:56:15.007 - debug: semp.0 (53629) newDevice0 setLastPower 117 number AlwaysOn W 2023-03-11 09:56:15.008 - debug: semp.0 (53629) newDevice0 calc energy 117 1678524960033 = 0.6064175Wh 2023-03-11 09:56:16.376 - debug: semp.0 (53629) SHM requested description 2023-03-11 09:56:30.009 - debug: semp.0 (53629) newDevice0 setLastPower 117 number AlwaysOn W 2023-03-11 09:56:30.009 - debug: semp.0 (53629) newDevice0 calc energy 117 1678524975008 = 1.09395Wh 2023-03-11 09:56:36.377 - debug: semp.0 (53629) SHM requested description 2023-03-11 09:56:45.007 - debug: semp.0 (53629) newDevice0 setLastPower 122 number AlwaysOn W 2023-03-11 09:56:45.007 - debug: semp.0 (53629) newDevice0 calc energy 122 1678524990009 = 1.6022155555555555WhBei den Objekten finden sich immer noch die (null)s.
Danke für deine Unterstützung!!!
-
@webwanze sagte in Adapter: SMA SEMP:
error: semp.0 (53629) newDevice0 could not set state waiting on Devices.newDevice0.State
Der Fehler ist noch nicht behoben, nur ignoriert. Ich schaue das log nochmal genauer an. Irgendetwas passt noch nicht...
newDevice0 wrong device id F-0-000000000001-00! must follow F-xxxxxxxx-yyyyyyyyyyyy-zz
und den Fehler darfst du auch nicht ignorieren...
-
@rene_hm sagte in Adapter: SMA SEMP:
newDevice0 wrong device id F-0-000000000001-00! must follow F-xxxxxxxx-yyyyyyyyyyyy-zz
und den Fehler darfst du auch nicht ignorieren...
Ich habe da nichts geändert. Die ID wurde beim Hinzufügen des Devices automatisch generiert. Habe es aber jetzt mal geändert. Macht natürlich keinen Unterschied.
Über Java-Script
setState("semp.0.Devices.newDevice0.State", "test")
kann ich den State übrigens ändern. -
@webwanze sagte in Adapter: SMA SEMP:
Macht natürlich keinen Unterschied.
für o.g. Problem macht es keinen Unterschied, funktionell ist das wichtig.
-
@rene_hm
Ich habe noch etwas herumgespielt und auch was herausgefunden:Adapter installieren
Device anlegen
-> kein Update StateHost neu starten
-> kein Update StateState von Hand oder Script ändern
-> Fehler verschwunden, allerdings wird mein String "test" nicht upgedated
-> ich nehme an, weil sich der State für die Instanz nicht geändert hat, erfolgt kein Update. OK.Instanz neu starten
-> Alles i.O.
-> State wird auf "on" gesetzt. -
Wenn ich nun ein weiteres Device hinzufüge, wird der State ebenfalls nicht upgedated.
State von Hand auf z.B. "off" setzen.
Instanz neu startenfunktioniert.
Die Were für "Changed" und "RecommendedState" werden übrigens nicht gesetzt. Evtl. wird das auch nicht von der Instanz versucht ...
-
@webwanze sagte in Adapter: SMA SEMP:
Die Werte für "Changed" und "RecommendedState" werden übrigens nicht gesetzt
Die werden erst gesetzt, wenn eine Energieanforderung vom SHM beantwortet wurde. Solange du dein Gerät auf "immer an" hast und keine Energieanforderung stellst, reagiert der SHM nicht. Das Gerät wird dann nur im Portal dargestellt und zur Berechnung der Prognose herangezogen...
-
@webwanze sagte in Adapter: SMA SEMP:
State von Hand auf z.B. "off" setzen.
Instanz neu starten
funktioniert.Habe die Reihenfolge des startups vom Adapter geändert. Außerdem schreibe ich jetzt default-Werte auf die DP. Hoffe, das löst das Problem...
-
Scheint jetzt zu funkionieren:
2023-03-11 14:33:46.618 - info: host.ioBroker "system.adapter.semp.0" enabled 2023-03-11 14:33:46.650 - info: host.ioBroker instance system.adapter.semp.0 started with pid 4472 2023-03-11 14:33:47.283 - debug: semp.0 (4472) Redis Objects: Use Redis connection: 127.0.0.1:9001 2023-03-11 14:33:47.302 - debug: semp.0 (4472) Objects client ready ... initialize now 2023-03-11 14:33:47.303 - debug: semp.0 (4472) Objects create System PubSub Client 2023-03-11 14:33:47.304 - debug: semp.0 (4472) Objects create User PubSub Client 2023-03-11 14:33:47.317 - debug: semp.0 (4472) Objects client initialize lua scripts 2023-03-11 14:33:47.321 - debug: semp.0 (4472) Objects connected to redis: 127.0.0.1:9001 2023-03-11 14:33:47.332 - debug: semp.0 (4472) Redis States: Use Redis connection: 127.0.0.1:9000 2023-03-11 14:33:47.337 - debug: semp.0 (4472) States create System PubSub Client 2023-03-11 14:33:47.338 - debug: semp.0 (4472) States create User PubSub Client 2023-03-11 14:33:47.347 - debug: semp.0 (4472) States connected to redis: 127.0.0.1:9000 2023-03-11 14:33:47.370 - debug: semp.0 (4472) Plugin sentry Initialize Plugin (enabled=true) 2023-03-11 14:33:47.546 - info: semp.0 (4472) starting. Version 0.3.1 (non-npm: rg-engineering/ioBroker.semp#ba417263657375badc4c456e5859f8b0e308da66) in /opt/iobroker/node_modules/iobroker.semp, node: v16.19.0, js-controller: 4.0.24 2023-03-11 14:33:47.563 - debug: semp.0 (4472) SSDPServer created: http://192.168.1.2:9765/description.xml 58ee6313-b746-46aa-aae2-954018429865 2023-03-11 14:33:47.568 - debug: semp.0 (4472) SEMPServer created 2023-03-11 14:33:47.568 - debug: semp.0 (4472) gateway created... 2023-03-11 14:33:47.571 - debug: semp.0 (4472) SEMP server listening on 9765 2023-03-11 14:33:47.574 - debug: semp.0 (4472) SSDPServer started 2023-03-11 14:33:47.574 - debug: semp.0 (4472) gateway started... 2023-03-11 14:33:47.574 - debug: semp.0 (4472) Started all! 2023-03-11 14:33:47.575 - debug: semp.0 (4472) add device {"IsActive":true,"ID":"F-12345678-123456789012-12","Name":"newDevice0","Vendor":"ACME","Type":"Dryer","SerialNr":"1234","MaxPower":"1000","MinPower":"0","InterruptionsAllowed":false,"MinOnTime":"","MaxOnTime":"","MinOffTime":"","MaxOffTime":"","MeasurementMethod":"Measurement","OID_Power":"0_userdata.0.DEVICES.ECENTRALHEATING_P","MeasurementUnit":"W","BatteryCapacity":"","WallboxHas3phaseEnabler":false,"StatusDetection":"AlwaysOn","StatusDetectionLimit":0,"StatusDetectionLimitTimeOn":0,"StatusDetectionLimitTimeOff":0,"StatusDetectionMinRunTime":0,"OID_Status":"","HasOIDSwitch":false,"OID_Switch":"","SwitchOffAtEndOfTimer":false,"TimerActive":false,"TimerCancelIfNotOn":false,"TimerCancelIfNotOnTime":0,"EnergyRequestPeriods":[{"ID":"1","Days":"","EarliestStartTime":"","LatestEndTime":"","MinRunTime":"","MaxRunTime":""}],"WallboxOIDs":[{"active":true,"must":"obligatorisch","Name":"DeviceOIDPlugConnected","OID":"","Type":"Boolean","SetValue":"true"},{"active":false,"must":"optional","Name":"DeviceOIDIsCharging","OID":"","Type":"Boolean","SetValue":"true"},{"active":false,"must":"optional","Name":"DeviceOIDIsError","OID":"","Type":"Boolean","SetValue":"true"},{"active":true,"must":"obligatorisch","Name":"DeviceOIDChargePower","OID":"","Type":"Number","SetValue":"0"},{"active":false,"must":"optional","Name":"DeviceOIDStartCharge","OID":"","Type":"Boolean","SetValue":"true"},{"active":false,"must":"optional","Name":"DeviceOIDStopCharge","OID":"","Type":"Boolean","SetValue":"true"}]} 2023-03-11 14:33:47.575 - debug: semp.0 (4472) add device F-12345678-123456789012-12 2023-03-11 14:33:47.576 - debug: semp.0 (4472) can use optional energy: false 2023-03-11 14:33:47.577 - info: semp.0 (4472) device created F-12345678-123456789012-12 newDevice0 2023-03-11 14:33:47.577 - debug: semp.0 (4472) set device 2023-03-11 14:33:47.577 - debug: semp.0 (4472) newDevice0 setState On 2023-03-11 14:33:47.578 - debug: semp.0 (4472) UpdateData 2023-03-11 14:33:47.579 - debug: semp.0 (4472) device {"IsActive":true,"ID":"F-12345678-123456789012-12","Name":"newDevice0","Vendor":"ACME","Type":"Dryer","SerialNr":"1234","MaxPower":"1000","MinPower":"0","InterruptionsAllowed":false,"MinOnTime":"","MaxOnTime":"","MinOffTime":"","MaxOffTime":"","MeasurementMethod":"Measurement","OID_Power":"0_userdata.0.DEVICES.ECENTRALHEATING_P","MeasurementUnit":"W","BatteryCapacity":"","WallboxHas3phaseEnabler":false,"StatusDetection":"AlwaysOn","StatusDetectionLimit":0,"StatusDetectionLimitTimeOn":0,"StatusDetectionLimitTimeOff":0,"StatusDetectionMinRunTime":0,"OID_Status":"","HasOIDSwitch":false,"OID_Switch":"","SwitchOffAtEndOfTimer":false,"TimerActive":false,"TimerCancelIfNotOn":false,"TimerCancelIfNotOnTime":0,"EnergyRequestPeriods":[{"ID":"1","Days":"","EarliestStartTime":"","LatestEndTime":"","MinRunTime":"","MaxRunTime":""}],"WallboxOIDs":[{"active":true,"must":"obligatorisch","Name":"DeviceOIDPlugConnected","OID":"","Type":"Boolean","SetValue":"true"},{"active":false,"must":"optional","Name":"DeviceOIDIsCharging","OID":"","Type":"Boolean","SetValue":"true"},{"active":false,"must":"optional","Name":"DeviceOIDIsError","OID":"","Type":"Boolean","SetValue":"true"},{"active":true,"must":"obligatorisch","Name":"DeviceOIDChargePower","OID":"","Type":"Number","SetValue":"0"},{"active":false,"must":"optional","Name":"DeviceOIDStartCharge","OID":"","Type":"Boolean","SetValue":"true"},{"active":false,"must":"optional","Name":"DeviceOIDStopCharge","OID":"","Type":"Boolean","SetValue":"true"}],"OptionalEnergy":false} 2023-03-11 14:33:47.579 - debug: semp.0 (4472) result [{"ID":"1","Days":"","EarliestStartTime":"","LatestEndTime":"","MinRunTime":"","MaxRunTime":""}] 2023-03-11 14:33:47.579 - debug: semp.0 (4472) result [{"IsActive":true,"ID":"F-12345678-123456789012-12","Name":"newDevice0","Vendor":"ACME","Type":"Dryer","SerialNr":"1234","MaxPower":"1000","MinPower":"0","InterruptionsAllowed":false,"MinOnTime":"","MaxOnTime":"","MinOffTime":"","MaxOffTime":"","MeasurementMethod":"Measurement","OID_Power":"0_userdata.0.DEVICES.ECENTRALHEATING_P","MeasurementUnit":"W","BatteryCapacity":"","WallboxHas3phaseEnabler":false,"StatusDetection":"AlwaysOn","StatusDetectionLimit":0,"StatusDetectionLimitTimeOn":0,"StatusDetectionLimitTimeOff":0,"StatusDetectionMinRunTime":0,"OID_Status":"","HasOIDSwitch":false,"OID_Switch":"","SwitchOffAtEndOfTimer":false,"TimerActive":false,"TimerCancelIfNotOn":false,"TimerCancelIfNotOnTime":0,"EnergyRequestPeriods":[{"ID":"1","Days":"","EarliestStartTime":"","LatestEndTime":"","MinRunTime":"","MaxRunTime":""}],"WallboxOIDs":[{"active":true,"must":"obligatorisch","Name":"DeviceOIDPlugConnected","OID":"","Type":"Boolean","SetValue":"true"},{"active":false,"must":"optional","Name":"DeviceOIDIsCharging","OID":"","Type":"Boolean","SetValue":"true"},{"active":false,"must":"optional","Name":"DeviceOIDIsError","OID":"","Type":"Boolean","SetValue":"true"},{"active":true,"must":"obligatorisch","Name":"DeviceOIDChargePower","OID":"","Type":"Number","SetValue":"0"},{"active":false,"must":"optional","Name":"DeviceOIDStartCharge","OID":"","Type":"Boolean","SetValue":"true"},{"active":false,"must":"optional","Name":"DeviceOIDStopCharge","OID":"","Type":"Boolean","SetValue":"true"}],"OptionalEnergy":false}] 2023-03-11 14:33:47.593 - debug: semp.0 (4472) newDevice0 got {"val":"on","ack":true,"ts":1678541192446,"q":0,"from":"system.adapter.semp.0","user":"system.user.admin","lc":1678541192446} from Devices.newDevice0.State 2023-03-11 14:33:47.597 - debug: semp.0 (4472) newDevice0 got object {"type":"state","common":{"name":"recommended state from SHM","type":"boolean","role":"state","read":true,"write":false},"from":"system.adapter.semp.0","user":"system.user.admin","ts":1678541192445,"_id":"semp.0.Devices.newDevice0.RecommendedState","acl":{"object":1636,"state":1636,"owner":"system.user.admin","ownerGroup":"system.group.administrator"}} for Devices.newDevice0.RecommendedState 2023-03-11 14:33:47.649 - debug: semp.0 (4472) newDevice0 got object {"type":"state","common":{"name":"last time recommendation changed","type":"string","role":"value.time","read":true,"write":false},"from":"system.adapter.semp.0","user":"system.user.admin","ts":1678541192499,"_id":"semp.0.Devices.newDevice0.Changed","acl":{"object":1636,"state":1636,"owner":"system.user.admin","ownerGroup":"system.group.administrator"}} for Devices.newDevice0.Changed 2023-03-11 14:33:47.650 - debug: semp.0 (4472) newDevice0 got object {"type":"state","common":{"name":"current State","type":"string","role":"state","read":true,"write":false},"from":"system.adapter.semp.0","user":"system.user.admin","ts":1678541192505,"_id":"semp.0.Devices.newDevice0.State","acl":{"object":1636,"state":1636,"owner":"system.user.admin","ownerGroup":"system.group.administrator"}} for Devices.newDevice0.State 2023-03-11 14:33:47.652 - debug: semp.0 (4472) newDevice0 got object {"type":"state","common":{"name":"Energy used","type":"number","unit":"Wh","role":"value","read":true,"write":false},"from":"system.adapter.semp.0","user":"system.user.admin","ts":1678541192509,"_id":"semp.0.Devices.newDevice0.Energy","acl":{"object":1636,"state":1636,"owner":"system.user.admin","ownerGroup":"system.group.administrator"}} for Devices.newDevice0.Energy 2023-03-11 14:33:47.655 - debug: semp.0 (4472) subscribe OID_Power 0_userdata.0.DEVICES.ECENTRALHEATING_P 2023-03-11 14:33:47.657 - debug: semp.0 (4472) newDevice0 setLastPower 33 number AlwaysOn W 2023-03-11 14:33:47.681 - debug: semp.0 (4472) newDevice0 got {"val":"on","ack":true,"ts":1678541192446,"q":0,"from":"system.adapter.semp.0","user":"system.user.admin","lc":1678541192446} from Devices.newDevice0.State 2023-03-11 14:33:50.632 - debug: semp.0 (4472) SHM requested description 2023-03-11 14:33:50.632 - info: semp.0 (4472) adapter discovered by SHM 2023-03-11 14:33:56.466 - debug: semp.0 (4472) SHM requested all devices. /semp/ ::ffff:192.168.0.49 http 2023-03-11 14:33:56.466 - debug: semp.0 (4472) get all devices 2023-03-11 14:33:56.467 - debug: semp.0 (4472) get all devices [{"deviceInfo":{"Identification":{"DeviceId":"F-12345678-123456789012-12","DeviceName":"newDevice0","DeviceType":"Dryer","DeviceSerial":"1234","DeviceVendor":"ACME"},"Characteristics":{"MaxPowerConsumption":"1000"},"Capabilities":{"CurrentPower":{"Method":"Measurement"},"Timestamps":{"AbsoluteTimestamps":false},"Interruptions":{"InterruptionsAllowed":false},"Requests":{"OptionalEnergy":false}}},"deviceStatus":{"DeviceId":"F-12345678-123456789012-12","EMSignalsAccepted":true,"Status":"On","PowerConsumption":{"PowerInfo":[{"AveragePower":33,"Timestamp":0,"AveragingInterval":60}]}},"planningRequest":{"Timeframe":[]}}] 2023-03-11 14:33:56.469 - debug: semp.0 (4472) response xml F-12345678-123456789012-12 newDevice0 Dryer 1234 ACME 1000 Measurement false false false F-12345678-123456789012-12 true On 33 0 60 2023-03-11 14:33:56.470 - debug: semp.0 (4472) response sent 2023-03-11 14:33:56.627 - debug: semp.0 (4472) SHM requested all devices. /semp/ ::ffff:192.168.0.49 http 2023-03-11 14:33:56.627 - debug: semp.0 (4472) get all devices 2023-03-11 14:33:56.627 - debug: semp.0 (4472) get all devices [{"deviceInfo":{"Identification":{"DeviceId":"F-12345678-123456789012-12","DeviceName":"newDevice0","DeviceType":"Dryer","DeviceSerial":"1234","DeviceVendor":"ACME"},"Characteristics":{"MaxPowerConsumption":"1000"},"Capabilities":{"CurrentPower":{"Method":"Measurement"},"Timestamps":{"AbsoluteTimestamps":false},"Interruptions":{"InterruptionsAllowed":false},"Requests":{"OptionalEnergy":false}}},"deviceStatus":{"DeviceId":"F-12345678-123456789012-12","EMSignalsAccepted":true,"Status":"On","PowerConsumption":{"PowerInfo":[{"AveragePower":33,"Timestamp":0,"AveragingInterval":60}]}},"planningRequest":{"Timeframe":[]}}] 2023-03-11 14:33:56.628 - debug: semp.0 (4472) response xml F-12345678-123456789012-12 newDevice0 Dryer 1234 ACME 1000 Measurement false false false F-12345678-123456789012-12 true On 33 0 60 2023-03-11 14:33:56.629 - debug: semp.0 (4472) response sent 2023-03-11 14:33:56.727 - debug: semp.0 (4472) SHM requested all devices. /semp/ ::ffff:192.168.0.49 http 2023-03-11 14:33:56.727 - debug: semp.0 (4472) get all devices 2023-03-11 14:33:56.727 - debug: semp.0 (4472) get all devices [{"deviceInfo":{"Identification":{"DeviceId":"F-12345678-123456789012-12","DeviceName":"newDevice0","DeviceType":"Dryer","DeviceSerial":"1234","DeviceVendor":"ACME"},"Characteristics":{"MaxPowerConsumption":"1000"},"Capabilities":{"CurrentPower":{"Method":"Measurement"},"Timestamps":{"AbsoluteTimestamps":false},"Interruptions":{"InterruptionsAllowed":false},"Requests":{"OptionalEnergy":false}}},"deviceStatus":{"DeviceId":"F-12345678-123456789012-12","EMSignalsAccepted":true,"Status":"On","PowerConsumption":{"PowerInfo":[{"AveragePower":33,"Timestamp":0,"AveragingInterval":60}]}},"planningRequest":{"Timeframe":[]}}] 2023-03-11 14:33:56.728 - debug: semp.0 (4472) response xml F-12345678-123456789012-12 newDevice0 Dryer 1234 ACME 1000 Measurement false false false F-12345678-123456789012-12 true On 33 0 60 2023-03-11 14:33:56.728 - debug: semp.0 (4472) response sent 2023-03-11 14:34:00.048 - debug: semp.0 (4472) newDevice0 setLastPower 33 number AlwaysOn W 2023-03-11 14:34:00.048 - debug: semp.0 (4472) newDevice0 calc energy 33 1678541627657 = 0.11358416666666667Wh 2023-03-11 14:34:07.617 - debug: semp.0 (4472) SHM requested description 2023-03-11 14:34:15.008 - debug: semp.0 (4472) newDevice0 setLastPower 33 number AlwaysOn W 2023-03-11 14:34:15.008 - debug: semp.0 (4472) newDevice0 calc energy 33 1678541640048 = 0.2507175Wh 2023-03-11 14:34:27.620 - debug: semp.0 (4472) SHM requested description 2023-03-11 14:34:30.026 - debug: semp.0 (4472) newDevice0 setLastPower 33 number AlwaysOn W 2023-03-11 14:34:30.027 - debug: semp.0 (4472) newDevice0 calc energy 33 1678541655008 = 0.3883916666666667Wh 2023-03-11 14:34:41.757 - debug: semp.0 (4472) SHM requested description 2023-03-11 14:34:41.795 - debug: semp.0 (4472) SHM requested description 2023-03-11 14:34:45.008 - debug: semp.0 (4472) newDevice0 setLastPower 33 number AlwaysOn W 2023-03-11 14:34:45.008 - debug: semp.0 (4472) newDevice0 calc energy 33 1678541670027 = 0.5257175000000001Wh 2023-03-11 14:34:47.615 - debug: semp.0 (4472) SHM requested description 2023-03-11 14:34:56.905 - debug: semp.0 (4472) SHM requested all devices. /semp/ ::ffff:192.168.0.49 http 2023-03-11 14:34:56.905 - debug: semp.0 (4472) get all devices 2023-03-11 14:34:56.906 - debug: semp.0 (4472) get all devices [{"deviceInfo":{"Identification":{"DeviceId":"F-12345678-123456789012-12","DeviceName":"newDevice0","DeviceType":"Dryer","DeviceSerial":"1234","DeviceVendor":"ACME"},"Characteristics":{"MaxPowerConsumption":"1000"},"Capabilities":{"CurrentPower":{"Method":"Measurement"},"Timestamps":{"AbsoluteTimestamps":false},"Interruptions":{"InterruptionsAllowed":false},"Requests":{"OptionalEnergy":false}}},"deviceStatus":{"DeviceId":"F-12345678-123456789012-12","EMSignalsAccepted":true,"Status":"On","PowerConsumption":{"PowerInfo":[{"AveragePower":33,"Timestamp":0,"AveragingInterval":60}]}},"planningRequest":{"Timeframe":[]}}] 2023-03-11 14:34:56.907 - debug: semp.0 (4472) response xml F-12345678-123456789012-12 newDevice0 Dryer 1234 ACME 1000 Measurement false false false F-12345678-123456789012-12 true On 33 0 60 2023-03-11 14:34:56.909 - debug: semp.0 (4472) response sent 2023-03-11 14:34:57.093 - debug: semp.0 (4472) SHM requested all devices. /semp/ ::ffff:192.168.0.49 http 2023-03-11 14:34:57.093 - debug: semp.0 (4472) get all devices 2023-03-11 14:34:57.094 - debug: semp.0 (4472) get all devices [{"deviceInfo":{"Identification":{"DeviceId":"F-12345678-123456789012-12","DeviceName":"newDevice0","DeviceType":"Dryer","DeviceSerial":"1234","DeviceVendor":"ACME"},"Characteristics":{"MaxPowerConsumption":"1000"},"Capabilities":{"CurrentPower":{"Method":"Measurement"},"Timestamps":{"AbsoluteTimestamps":false},"Interruptions":{"InterruptionsAllowed":false},"Requests":{"OptionalEnergy":false}}},"deviceStatus":{"DeviceId":"F-12345678-123456789012-12","EMSignalsAccepted":true,"Status":"On","PowerConsumption":{"PowerInfo":[{"AveragePower":33,"Timestamp":0,"AveragingInterval":60}]}},"planningRequest":{"Timeframe":[]}}] 2023-03-11 14:34:57.094 - debug: semp.0 (4472) response xml F-12345678-123456789012-12 newDevice0 Dryer 1234 ACME 1000 Measurement false false false F-12345678-123456789012-12 true On 33 0 60 2023-03-11 14:34:57.095 - debug: semp.0 (4472) response sent 2023-03-11 14:34:57.185 - debug: semp.0 (4472) SHM requested all devices. /semp/ ::ffff:192.168.0.49 http 2023-03-11 14:34:57.186 - debug: semp.0 (4472) get all devices 2023-03-11 14:34:57.186 - debug: semp.0 (4472) get all devices [{"deviceInfo":{"Identification":{"DeviceId":"F-12345678-123456789012-12","DeviceName":"newDevice0","DeviceType":"Dryer","DeviceSerial":"1234","DeviceVendor":"ACME"},"Characteristics":{"MaxPowerConsumption":"1000"},"Capabilities":{"CurrentPower":{"Method":"Measurement"},"Timestamps":{"AbsoluteTimestamps":false},"Interruptions":{"InterruptionsAllowed":false},"Requests":{"OptionalEnergy":false}}},"deviceStatus":{"DeviceId":"F-12345678-123456789012-12","EMSignalsAccepted":true,"Status":"On","PowerConsumption":{"PowerInfo":[{"AveragePower":33,"Timestamp":0,"AveragingInterval":60}]}},"planningRequest":{"Timeframe":[]}}] 2023-03-11 14:34:57.186 - debug: semp.0 (4472) response xml F-12345678-123456789012-12 newDevice0 Dryer 1234 ACME 1000 Measurement false false false F-12345678-123456789012-12 true On 33 0 60 2023-03-11 14:34:57.187 - debug: semp.0 (4472) response sent 2023-03-11 14:35:00.013 - debug: semp.0 (4472) newDevice0 setLastPower 33 number AlwaysOn W 2023-03-11 14:35:00.014 - debug: semp.0 (4472) newDevice0 calc energy 33 1678541685008 = 0.6632633333333334Wh -
Nutzt hier noch keiner die PV Überschussladen Funktion mit automatischer Phasenumschaltung?
-
Hab jetzt mal zwei Wallbox hinzugefügt, schade er lässt nicht beide gleichzeitig laden und teilt sich das auf.Schaltet nur zwischen beiden Boxen immer um.
-
@cb187 reicht PV - Leistung nicht für beide?
-
@rene_hm für beide hätte es gereicht wenn es aufgeteilt wäre.Aber ka wie sma das handhabt bzw ist die frage ob das bei den überhaupt geht.
