Test Adapter HeatingControl v2.12.x

[maarten]

@maarten
Übrigens läuft Adapterversion 0.3.0

[Rene_HM]

@maarten sagte in Adapter: HeatingControl:

Übrigens läuft Adapterversion 0.3.0

Bitte beachte, dass die 0.3.0 noch in der Entwicklung ist. Da habe ich einige Themen begonnen aber teilweise noch nicht fertig...

Bzgl. des o.g. Problems:
Der Fehler scheint daher zu kommen, dass auf einen Datenpunkt geschrieben wird, den hm-rpc nicht akzeptiert. Ich sehe anhand des logs aber nicht, wo das passiert. Deshalb bitte den adapter im debug-Mode starten und das log nochmal posten.

[AxelF1977]

@Rene_HM said in Adapter: HeatingControl:

@AxelF1977 Die Konfiguration ist in mehreren Punkten falsch...

• "OID Aktueller Wert" sollte nur Datenpunkte mit Actual_Temperature enthalten. Ein SetPoint darf da nicht auftauchen. "OID Aktueller Wert" ist der Datenpunkt des Gerätes, der die aktuelle Temperatur enthält!

• "OID Zielwert" sollte nur Datenpunkte mit SetPoint enthalten. Ein Actual_Temperature darf da nicht auftauchen. "OID Zielwert" ist der Datenpunkt des Gerätes, der die Zieltemperatur enthält.
• die Aktoren müssen digitale Aktoren sein. Ein Thermostat darf da nicht auftauchen. Es muss dort ein state eines digitalen Outputs sein. Ein Setpoint oder Actual_Temperature darf da nicht stehen.
• generell darf ein Gerät nur einmal in der Liste auftauchen. Es darf keine zwei Zeilen mit dem gleichen Gerät geben.

Den Satz verstehe ich auch nicht

Konfiguration: Thermostate von Homematic, angesteuert mit den entsprechenden Wandthermostaten

Kannst du mal die HM-Bezeichnung der Geräte posten, die du verwendest?

Wenn du HM-Geräte verwendest, sollte eigentlich die automatische Suche funktionieren. Du musst nur die entsprechenden Geräte dem Gewerk "Heizung" zuordnen

Mahlzeit,

ich werde das hier mal weiter beobachten. Aktuell habe ich erstmal wieder das Javascript von Looxer01 zu laufen. Ich werde mich später nochmal mit dem Adapter beschäftigen. Ist gerade zuviel Arbeit die VIS umzubauen.

Vielen Dank für den Adapter, bin gespannt wie es weiter geht

[holgerwolf]

Mit Begin der Heizperiode bin ich auch vom Script auf den Adapter (V 0.3.0) umgestiegen.
Sieht erstmal soweit gut gut. Muss ich noch ein wenig beobachten und die Einbindung in VIS machen.

Aber ich bekomme im Log folgende Warnung:

heatingcontrol.0	2019-10-04 14:59:26.322	warn	Empty ID: {"val":true,"from":"system.adapter.heatingcontrol.0","user":"system.user.admin"}

Irgend ne Idee wo her das kommt?

Gruß
Holger

[Rene_HM]

@holgerwolf ich vermute eine falsche Konfiguration. Zeige bitte mal deine Thermostat-Konfiguration...

[holgerwolf]

@Rene_HM Das könnte sein.

Hier das Thermostat:

Unter Actoren hatte ich erst den Heizungsaktor drin. Aber der wird ja vom Thermostat gesteuert. Aber löschen geht irgendwie nicht. Sobald ich den Wert mit dem Papierkorb lösche und dann das Fenster wieder öffne ist der leere Wert wieder da:

[Rene_HM]

@holgerwolf okay, das mit dem Löschen schaue ich mir noch mal an.
edit:
habe dazu ein Ticket angelegt:
https://github.com/rg-engineering/ioBroker.heatingcontrol/issues/35

Die Aktoren sollten aber nicht das Problem bzgl. o.g. logs sein, solange du "Aktoren verwendet" nicht aktiv hast, dann sind die Aktoren zwar da, werden aber nicht verwendet.
Die Thermostat-Konfiguration sieht gut aus...
Kannst du den Adapter mal im debug-Mode laufen lassen und das entsprechende log posten?

rg-engineering created this issue in rg-engineering/ioBroker.heatingcontrol

closed Devices can not be deleted #35

[holgerwolf]

Ich hoffe ich habe alle Relevante erwischt:

2019-10-04 16:07:58.424 - info: host.ubuntu object change system.adapter.heatingcontrol.0
2019-10-04 16:07:58.425 - info: heatingcontrol.0 cleaned everything up...
2019-10-04 16:07:58.425 - info: host.ubuntu stopInstance system.adapter.heatingcontrol.0
2019-10-04 16:07:58.425 - info: host.ubuntu stopInstance system.adapter.heatingcontrol.0 killing pid 27653
2019-10-04 16:07:58.428 - info: heatingcontrol.0 cleaned everything up...
2019-10-04 16:07:58.448 - error: Caught by controller[1]: (node:27653) UnhandledPromiseRejectionWarning: Empty ID: {"val":true,"from":"system.adapter.heatingcontrol.0","user":"system.user.admin"}
2019-10-04 16:07:58.448 - error: Caught by controller[1]: (node:27653) UnhandledPromiseRejectionWarning: Unhandled promise rejection. This error originated either by throwing inside of an async function without a catch block, or by rejecting a promise which was not handled with .catch(). (rejection id: 18)
2019-10-04 16:07:58.448 - info: host.ubuntu instance system.adapter.heatingcontrol.0 terminated with code 156 ()
2019-10-04 16:08:00.930 - info: host.ubuntu instance system.adapter.heatingcontrol.0 started with pid 17959
2019-10-04 16:08:01.119 - debug: heatingcontrol.0 objectDB connected
2019-10-04 16:08:01.128 - debug: heatingcontrol.0 statesDB connected
2019-10-04 16:08:01.229 - info: heatingcontrol.0 starting. Version 0.3.0 in /opt/iobroker/node_modules/iobroker.heatingcontrol, node: v10.16.3
2019-10-04 16:08:01.240 - debug: heatingcontrol.0 devices [{"id":1,"name":"Heizung Schalter Bad.STATE","isActive":true,"room":"Bad","type":2,"OID_Target":"hm-rpc.0.HEQ0366232.3.STATE"},{"id":2,"name":"Heizung Schalter Gaeste 3","isActive":true,"room":"Gaestezimmer","type":2,"OID_Target":"hm-rpc.0.HEQ0366232.4.STATE"},{"id":3,"name":"Thermostat Hobby 1.SETPOINT","OID_Current":"hm-rpc.0.GEQ0171035.1.TEMPERATURE","OID_Target":"hm-rpc.0.GEQ0171035.2.SETPOINT","isActive":true,"type":1,"room":"Hobby"},{"id":4,"name":"","OID_Target":"","isActive":false,"type":2,"room":"Hobby"},{"id":5,"name":"","OID_Target":"","isActive":false,"type":2,"room":"Hobby"},{"id":6,"name":"Heizung Wohnzimmer 1.SETPOINT","OID_Current":"hm-rpc.0.HEQ0366475.1.TEMPERATURE","OID_Target":"hm-rpc.0.HEQ0366475.2.SETPOINT","isActive":true,"type":1,"room":"Wohnzimmer"},{"id":7,"name":"Schalter Heizung Wohn.STATE","OID_Target":"hm-rpc.0.IEQ0504267.1.STATE","isActive":true,"type":2,"room":"Wohnzimmer"},{"id":8,"name":"Heizung Bad 1.SETPOINT","OID_Current":"hm-rpc.0.JEQ0225790.1.TEMPERATURE","OID_Target":"hm-rpc.0.JEQ0225790.2.SETPOINT","isActive":true,"type":1,"room":"Bad"}]
2019-10-04 16:08:01.241 - debug: heatingcontrol.0 CreateDatepoints
2019-10-04 16:08:01.286 - debug: heatingcontrol.0 rooms 10
2019-10-04 16:08:01.287 - debug: heatingcontrol.0 create data points for Wohnzimmer
2019-10-04 16:08:01.302 - debug: heatingcontrol.0 room Wohnzimmer with 4 periods
2019-10-04 16:08:01.302 - debug: heatingcontrol.0 Profile Type Mo-FR + Sa-So, profiles 1
2019-10-04 16:08:01.302 - debug: heatingcontrol.0 add state Profiles.0.Wohnzimmer.Mo-Fr.Periods.0 max 5
2019-10-04 16:08:01.302 - debug: heatingcontrol.0 add state Profiles.0.Wohnzimmer.Mo-Fr.Periods.1 max 5
2019-10-04 16:08:01.302 - debug: heatingcontrol.0 add state Profiles.0.Wohnzimmer.Mo-Fr.Periods.2 max 5
2019-10-04 16:08:01.302 - debug: heatingcontrol.0 add state Profiles.0.Wohnzimmer.Mo-Fr.Periods.3 max 5
2019-10-04 16:08:01.302 - debug: heatingcontrol.0 add state Profiles.0.Wohnzimmer.Su-So.Periods.0 max 5
2019-10-04 16:08:01.302 - debug: heatingcontrol.0 add state Profiles.0.Wohnzimmer.Su-So.Periods.1 max 5
2019-10-04 16:08:01.302 - debug: heatingcontrol.0 add state Profiles.0.Wohnzimmer.Su-So.Periods.2 max 5
2019-10-04 16:08:01.302 - debug: heatingcontrol.0 add state Profiles.0.Wohnzimmer.Su-So.Periods.3 max 5
2019-10-04 16:08:01.302 - debug: heatingcontrol.0 not active.... Studio
2019-10-04 16:08:01.303 - debug: heatingcontrol.0 create data points for Bad
2019-10-04 16:08:01.339 - debug: heatingcontrol.0 room Bad with 4 periods
2019-10-04 16:08:01.339 - debug: heatingcontrol.0 Profile Type Mo-FR + Sa-So, profiles 1
2019-10-04 16:08:01.339 - debug: heatingcontrol.0 add state Profiles.0.Bad.Mo-Fr.Periods.0 max 5
2019-10-04 16:08:01.340 - debug: heatingcontrol.0 add state Profiles.0.Bad.Mo-Fr.Periods.1 max 5
2019-10-04 16:08:01.340 - debug: heatingcontrol.0 add state Profiles.0.Bad.Mo-Fr.Periods.2 max 5
2019-10-04 16:08:01.340 - debug: heatingcontrol.0 add state Profiles.0.Bad.Mo-Fr.Periods.3 max 5
2019-10-04 16:08:01.340 - debug: heatingcontrol.0 add state Profiles.0.Bad.Su-So.Periods.0 max 5
2019-10-04 16:08:01.340 - debug: heatingcontrol.0 add state Profiles.0.Bad.Su-So.Periods.1 max 5
2019-10-04 16:08:01.340 - debug: heatingcontrol.0 add state Profiles.0.Bad.Su-So.Periods.2 max 5
2019-10-04 16:08:01.340 - debug: heatingcontrol.0 add state Profiles.0.Bad.Su-So.Periods.3 max 5
2019-10-04 16:08:01.340 - debug: heatingcontrol.0 not active.... HWR
2019-10-04 16:08:01.340 - debug: heatingcontrol.0 not active.... Garten
2019-10-04 16:08:01.340 - debug: heatingcontrol.0 create data points for Hobby
2019-10-04 16:08:01.378 - debug: heatingcontrol.0 room Hobby with 4 periods
2019-10-04 16:08:01.378 - debug: heatingcontrol.0 Profile Type Mo-FR + Sa-So, profiles 1
2019-10-04 16:08:01.378 - debug: heatingcontrol.0 add state Profiles.0.Hobby.Mo-Fr.Periods.0 max 5
2019-10-04 16:08:01.378 - debug: heatingcontrol.0 add state Profiles.0.Hobby.Mo-Fr.Periods.1 max 5
2019-10-04 16:08:01.378 - debug: heatingcontrol.0 add state Profiles.0.Hobby.Mo-Fr.Periods.2 max 5
2019-10-04 16:08:01.378 - debug: heatingcontrol.0 add state Profiles.0.Hobby.Mo-Fr.Periods.3 max 5
2019-10-04 16:08:01.378 - debug: heatingcontrol.0 add state Profiles.0.Hobby.Su-So.Periods.0 max 5
2019-10-04 16:08:01.378 - debug: heatingcontrol.0 add state Profiles.0.Hobby.Su-So.Periods.1 max 5
2019-10-04 16:08:01.378 - debug: heatingcontrol.0 add state Profiles.0.Hobby.Su-So.Periods.2 max 5
2019-10-04 16:08:01.378 - debug: heatingcontrol.0 add state Profiles.0.Hobby.Su-So.Periods.3 max 5
2019-10-04 16:08:01.378 - debug: heatingcontrol.0 not active.... Schlafzimmer
2019-10-04 16:08:01.378 - debug: heatingcontrol.0 not active.... Gaestezimmer
2019-10-04 16:08:01.378 - debug: heatingcontrol.0 not active.... Flur
2019-10-04 16:08:01.378 - debug: heatingcontrol.0 not active.... Kueche
2019-10-04 16:08:01.378 - debug: heatingcontrol.0 #start subscribtion
2019-10-04 16:08:01.379 - info: heatingcontrol.0 subscribe feiertage.0.heute.boolean
2019-10-04 16:08:01.379 - info: heatingcontrol.0 subscribe Hobby hm-rpc.0.GEQ0171035.2.SETPOINT / hm-rpc.0.GEQ0171035.1.TEMPERATURE
2019-10-04 16:08:01.379 - info: heatingcontrol.0 subscribe Wohnzimmer hm-rpc.0.HEQ0366475.2.SETPOINT / hm-rpc.0.HEQ0366475.1.TEMPERATURE
2019-10-04 16:08:01.379 - info: heatingcontrol.0 subscribe Bad hm-rpc.0.JEQ0225790.2.SETPOINT / hm-rpc.0.JEQ0225790.1.TEMPERATURE
2019-10-04 16:08:01.379 - debug: heatingcontrol.0 #subscribtion finished
2019-10-04 16:08:01.379 - debug: heatingcontrol.0 start CalculateNextTime, profile type 2
2019-10-04 16:08:01.379 - debug: heatingcontrol.0 get profile
2019-10-04 16:08:01.441 - debug: heatingcontrol.0 profile 0
2019-10-04 16:08:01.474 - debug: heatingcontrol.0 ---1 found time for Wohnzimmer at {"val":"00:00","ack":true,"ts":1570184877412,"q":0,"from":"system.adapter.heatingcontrol.0","user":"system.user.admin","lc":1570184877284} 00:00
2019-10-04 16:08:01.474 - debug: heatingcontrol.0 push to list = 00,00
2019-10-04 16:08:01.490 - debug: heatingcontrol.0 ---1 found time for Wohnzimmer at {"val":"14:00","ack":true,"ts":1570188148737,"q":0,"from":"system.adapter.heatingcontrol.0","user":"system.user.admin","lc":1570188148569} 14:00
2019-10-04 16:08:01.490 - debug: heatingcontrol.0 push to list = 14,00
2019-10-04 16:08:01.495 - debug: heatingcontrol.0 ---1 found time for Wohnzimmer at {"val":"22:30","ack":true,"ts":1570184960855,"q":0,"from":"system.adapter.heatingcontrol.0","user":"system.user.admin","lc":1570184960751} 22:30
2019-10-04 16:08:01.495 - debug: heatingcontrol.0 push to list = 22,30
2019-10-04 16:08:01.498 - debug: heatingcontrol.0 ---1 found time for Wohnzimmer at {"val":"22:30","ack":true,"ts":1570184983804,"q":0,"from":"system.adapter.heatingcontrol.0","user":"system.user.admin","lc":1570184983719} 22:30
2019-10-04 16:08:01.504 - debug: heatingcontrol.0 ---2 found time for Wohnzimmer at {"val":"00:00","ack":true,"ts":1570185076234,"q":0,"from":"system.adapter.heatingcontrol.0","user":"system.user.admin","lc":1570185076099} 00:00
2019-10-04 16:08:01.504 - debug: heatingcontrol.0 push to list = 00,00
2019-10-04 16:08:01.507 - debug: heatingcontrol.0 ---2 found time for Wohnzimmer at {"val":"08:00","ack":true,"ts":1570184609447,"q":0,"from":"system.adapter.heatingcontrol.0","user":"system.user.admin","lc":1570184609447} 08:00
2019-10-04 16:08:01.507 - debug: heatingcontrol.0 push to list = 08,00
2019-10-04 16:08:01.513 - debug: heatingcontrol.0 ---2 found time for Wohnzimmer at {"val":"22:00","ack":true,"ts":1570185196688,"q":0,"from":"system.adapter.heatingcontrol.0","user":"system.user.admin","lc":1570185196581} 22:00
2019-10-04 16:08:01.513 - debug: heatingcontrol.0 push to list = 22,00
2019-10-04 16:08:01.519 - debug: heatingcontrol.0 ---2 found time for Wohnzimmer at {"val":"22:00","ack":true,"ts":1570185251680,"q":0,"from":"system.adapter.heatingcontrol.0","user":"system.user.admin","lc":1570185251568} 22:00
2019-10-04 16:08:01.521 - debug: heatingcontrol.0 ---1 found time for Bad at {"val":"00:00","ack":true,"ts":1570187067402,"q":0,"from":"system.adapter.heatingcontrol.0","user":"system.user.admin","lc":1570187002095} 00:00
2019-10-04 16:08:01.524 - debug: heatingcontrol.0 ---1 found time for Bad at {"val":"04:00","ack":true,"ts":1570187129193,"q":0,"from":"system.adapter.heatingcontrol.0","user":"system.user.admin","lc":1570187129009} 04:00
2019-10-04 16:08:01.524 - debug: heatingcontrol.0 push to list = 04,00
2019-10-04 16:08:01.527 - debug: heatingcontrol.0 ---1 found time for Bad at {"val":"05:00","ack":true,"ts":1570187270903,"q":0,"from":"system.adapter.heatingcontrol.0","user":"system.user.admin","lc":1570187270693} 05:00
2019-10-04 16:08:01.527 - debug: heatingcontrol.0 push to list = 05,00
2019-10-04 16:08:01.584 - debug: heatingcontrol.0 ---1 found time for Bad at {"val":"17:00","ack":true,"ts":1570187346080,"q":0,"from":"system.adapter.heatingcontrol.0","user":"system.user.admin","lc":1570187345940} 17:00
2019-10-04 16:08:01.584 - debug: heatingcontrol.0 push to list = 17,00
2019-10-04 16:08:01.597 - debug: heatingcontrol.0 ---2 found time for Bad at {"val":"00:00","ack":true,"ts":1570187610071,"q":0,"from":"system.adapter.heatingcontrol.0","user":"system.user.admin","lc":1570187609898} 00:00
2019-10-04 16:08:01.601 - debug: heatingcontrol.0 ---2 found time for Bad at {"val":"06:00","ack":true,"ts":1570187745063,"q":0,"from":"system.adapter.heatingcontrol.0","user":"system.user.admin","lc":1570187744889} 06:00
2019-10-04 16:08:01.601 - debug: heatingcontrol.0 push to list = 06,00
2019-10-04 16:08:01.609 - debug: heatingcontrol.0 ---2 found time for Bad at {"val":"23:00","ack":true,"ts":1570187869556,"q":0,"from":"system.adapter.heatingcontrol.0","user":"system.user.admin","lc":1570187869442} 23:00
2019-10-04 16:08:01.612 - debug: heatingcontrol.0 push to list = 23,00
2019-10-04 16:08:01.619 - debug: heatingcontrol.0 ---2 found time for Bad at {"val":"23:00","ack":true,"ts":1570187884926,"q":0,"from":"system.adapter.heatingcontrol.0","user":"system.user.admin","lc":1570187884799} 23:00
2019-10-04 16:08:01.691 - debug: heatingcontrol.0 ---1 found time for Hobby at {"val":"00:00","ack":true,"ts":1570182698684,"q":0,"from":"system.adapter.heatingcontrol.0","user":"system.user.admin","lc":1570182698518} 00:00
2019-10-04 16:08:01.700 - debug: heatingcontrol.0 ---1 found time for Hobby at {"val":"07:30","ack":true,"ts":1570184159739,"q":0,"from":"system.adapter.heatingcontrol.0","user":"system.user.admin","lc":1570182727294} 07:30
2019-10-04 16:08:01.700 - debug: heatingcontrol.0 push to list = 07,30
2019-10-04 16:08:01.712 - debug: heatingcontrol.0 ---1 found time for Hobby at {"val":"17:00","ack":true,"ts":1570182858606,"q":0,"from":"system.adapter.heatingcontrol.0","user":"system.user.admin","lc":1570182858536} 17:00
2019-10-04 16:08:01.783 - debug: heatingcontrol.0 ---1 found time for Hobby at {"val":"17:00","ack":true,"ts":1570182927636,"q":0,"from":"system.adapter.heatingcontrol.0","user":"system.user.admin","lc":1570182927539} 17:00
2019-10-04 16:08:01.785 - debug: heatingcontrol.0 ---2 found time for Hobby at {"val":"05:00","ack":true,"ts":1570182469509,"q":0,"from":"system.adapter.heatingcontrol.0","user":"system.user.admin","lc":1570182469509} 05:00
2019-10-04 16:08:01.785 - debug: heatingcontrol.0 push to list = 05,00
2019-10-04 16:08:01.787 - debug: heatingcontrol.0 ---2 found time for Hobby at {"val":"08:00","ack":true,"ts":1570182469512,"q":0,"from":"system.adapter.heatingcontrol.0","user":"system.user.admin","lc":1570182469512} 08:00
2019-10-04 16:08:01.787 - debug: heatingcontrol.0 ---2 found time for Hobby at {"val":"12:00","ack":true,"ts":1570182469512,"q":0,"from":"system.adapter.heatingcontrol.0","user":"system.user.admin","lc":1570182469512} 12:00
2019-10-04 16:08:01.788 - debug: heatingcontrol.0 push to list = 12,00
2019-10-04 16:08:01.790 - debug: heatingcontrol.0 ---2 found time for Hobby at {"val":"16:00","ack":true,"ts":1570182469513,"q":0,"from":"system.adapter.heatingcontrol.0","user":"system.user.admin","lc":1570182469513} 16:00
2019-10-04 16:08:01.791 - debug: heatingcontrol.0 push to list = 16,00
2019-10-04 16:08:01.791 - info: heatingcontrol.0 check for heating period based on settings between 01.10. and 31.03.
2019-10-04 16:08:01.791 - debug: heatingcontrol.0 HeatingPeriod: create cron job #0 at 01.10 string: 5 0 01 9 * Europe/Berlin
2019-10-04 16:08:01.800 - debug: heatingcontrol.0 HeatingPeriod: create cron job #1 at 31.03 string: 55 23 31 2 * Europe/Berlin
2019-10-04 16:08:01.806 - debug: heatingcontrol.0 create cron job #2 at 0:0 string: 0 0 0 * * 1-5 Europe/Berlin
2019-10-04 16:08:01.808 - debug: heatingcontrol.0 create cron job #3 at 14:0 string: 0 0 14 * * 1-5 Europe/Berlin
2019-10-04 16:08:01.809 - debug: heatingcontrol.0 create cron job #4 at 22:30 string: 0 30 22 * * 1-5 Europe/Berlin
2019-10-04 16:08:01.811 - debug: heatingcontrol.0 create cron job #5 at 0:0 string: 0 0 0 * * 0,6 Europe/Berlin
2019-10-04 16:08:01.813 - debug: heatingcontrol.0 create cron job #6 at 8:0 string: 0 0 8 * * 0,6 Europe/Berlin
2019-10-04 16:08:01.814 - debug: heatingcontrol.0 create cron job #7 at 22:0 string: 0 0 22 * * 0,6 Europe/Berlin
2019-10-04 16:08:01.815 - debug: heatingcontrol.0 create cron job #8 at 4:0 string: 0 0 4 * * 1-5 Europe/Berlin
2019-10-04 16:08:01.816 - debug: heatingcontrol.0 create cron job #9 at 5:0 string: 0 0 5 * * 1-5 Europe/Berlin
2019-10-04 16:08:01.821 - debug: heatingcontrol.0 create cron job #10 at 17:0 string: 0 0 17 * * 1-5 Europe/Berlin
2019-10-04 16:08:01.824 - debug: heatingcontrol.0 create cron job #11 at 6:0 string: 0 0 6 * * 0,6 Europe/Berlin
2019-10-04 16:08:01.825 - debug: heatingcontrol.0 create cron job #12 at 23:0 string: 0 0 23 * * 0,6 Europe/Berlin
2019-10-04 16:08:01.826 - debug: heatingcontrol.0 create cron job #13 at 7:30 string: 0 30 7 * * 1-5 Europe/Berlin
2019-10-04 16:08:01.827 - debug: heatingcontrol.0 create cron job #14 at 5:0 string: 0 0 5 * * 0,6 Europe/Berlin
2019-10-04 16:08:01.828 - debug: heatingcontrol.0 create cron job #15 at 12:0 string: 0 0 12 * * 0,6 Europe/Berlin
2019-10-04 16:08:01.828 - debug: heatingcontrol.0 create cron job #16 at 16:0 string: 0 0 16 * * 0,6 Europe/Berlin
2019-10-04 16:08:01.830 - debug: heatingcontrol.0 cron jobs
2019-10-04 16:08:01.831 - debug: heatingcontrol.0 [INFO] status = true next event: 1 Oct 2020 00:05:00
2019-10-04 16:08:01.833 - debug: heatingcontrol.0 [INFO] status = true next event: 31 Mar 2020 23:55:00
2019-10-04 16:08:01.833 - debug: heatingcontrol.0 [INFO] status = true next event: 7 Oct 2019 00:00:00
2019-10-04 16:08:01.834 - debug: heatingcontrol.0 [INFO] status = true next event: 7 Oct 2019 14:00:00
2019-10-04 16:08:01.835 - debug: heatingcontrol.0 [INFO] status = true next event: 4 Oct 2019 22:30:00
2019-10-04 16:08:01.835 - debug: heatingcontrol.0 [INFO] status = true next event: 5 Oct 2019 00:00:00
2019-10-04 16:08:01.835 - debug: heatingcontrol.0 [INFO] status = true next event: 5 Oct 2019 08:00:00
2019-10-04 16:08:01.836 - debug: heatingcontrol.0 [INFO] status = true next event: 5 Oct 2019 22:00:00
2019-10-04 16:08:01.836 - debug: heatingcontrol.0 [INFO] status = true next event: 7 Oct 2019 04:00:00
2019-10-04 16:08:01.836 - debug: heatingcontrol.0 [INFO] status = true next event: 7 Oct 2019 05:00:00
2019-10-04 16:08:01.836 - debug: heatingcontrol.0 [INFO] status = true next event: 4 Oct 2019 17:00:00
2019-10-04 16:08:01.837 - debug: heatingcontrol.0 [INFO] status = true next event: 5 Oct 2019 06:00:00
2019-10-04 16:08:01.840 - debug: heatingcontrol.0 [INFO] status = true next event: 5 Oct 2019 23:00:00
2019-10-04 16:08:01.840 - debug: heatingcontrol.0 [INFO] status = true next event: 7 Oct 2019 07:30:00
2019-10-04 16:08:01.840 - debug: heatingcontrol.0 [INFO] status = true next event: 5 Oct 2019 05:00:00
2019-10-04 16:08:01.841 - debug: heatingcontrol.0 [INFO] status = true next event: 5 Oct 2019 12:00:00
2019-10-04 16:08:01.844 - debug: heatingcontrol.0 [INFO] status = true next event: 5 Oct 2019 16:00:00
2019-10-04 16:08:01.844 - info: heatingcontrol.0 calculating new target temperatures
2019-10-04 16:08:01.889 - debug: heatingcontrol.0 profile type 2
2019-10-04 16:08:01.889 - debug: heatingcontrol.0 get profile
2019-10-04 16:08:01.892 - debug: heatingcontrol.0 profile 0
2019-10-04 16:08:01.892 - debug: heatingcontrol.0 check room Wohnzimmer
2019-10-04 16:08:01.892 - debug: heatingcontrol.0 number of periods 4
2019-10-04 16:08:01.892 - debug: heatingcontrol.0 check ID Profiles.0.Wohnzimmer.Mo-Fr.Periods.0.time
2019-10-04 16:08:01.895 - debug: heatingcontrol.0 check time for Wohnzimmer Profiles.0.Wohnzimmer.Mo-Fr.Periods.0.time 19
2019-10-04 16:08:01.896 - debug: heatingcontrol.0 check ID Profiles.0.Wohnzimmer.Mo-Fr.Periods.1.time
2019-10-04 16:08:01.899 - debug: heatingcontrol.0 check time for Wohnzimmer Profiles.0.Wohnzimmer.Mo-Fr.Periods.1.time 23
2019-10-04 16:08:01.899 - debug: heatingcontrol.0 check ID Profiles.0.Wohnzimmer.Mo-Fr.Periods.2.time
2019-10-04 16:08:01.899 - debug: heatingcontrol.0 check ID Profiles.0.Wohnzimmer.Mo-Fr.Periods.3.time
2019-10-04 16:08:01.914 - debug: heatingcontrol.0 ### 23 0 0 0 0 0
2019-10-04 16:08:01.914 - info: heatingcontrol.0 room Wohnzimmer Thermostat Heizung Wohnzimmer 1.SETPOINT set to 23
2019-10-04 16:08:01.917 - debug: heatingcontrol.0 ### handle state change hm-rpc.0.HEQ0366475.2.SETPOINT {"val":23,"ack":false,"ts":1570198081915,"q":0,"from":"system.adapter.heatingcontrol.0","user":"system.user.admin","lc":1570190400054}
2019-10-04 16:08:01.918 - debug: heatingcontrol.0 ### 111 not handled
2019-10-04 16:08:01.918 - debug: heatingcontrol.0 handle actors hm-rpc.0.HEQ0366475.2.SETPOINT{"val":23,"ack":false,"ts":1570198081915,"q":0,"from":"system.adapter.heatingcontrol.0","user":"system.user.admin","lc":1570190400054}
2019-10-04 16:08:01.918 - debug: heatingcontrol.0 ### {"id":6,"name":"Heizung Wohnzimmer 1.SETPOINT","OID_Current":"hm-rpc.0.HEQ0366475.1.TEMPERATURE","OID_Target":"hm-rpc.0.HEQ0366475.2.SETPOINT","isActive":true,"type":1,"room":"Wohnzimmer"}
2019-10-04 16:08:01.920 - debug: heatingcontrol.0 check room Bad
2019-10-04 16:08:01.920 - debug: heatingcontrol.0 number of periods 4
2019-10-04 16:08:01.920 - debug: heatingcontrol.0 check ID Profiles.0.Bad.Mo-Fr.Periods.0.time
2019-10-04 16:08:01.921 - info: heatingcontrol.0 handle actors Wohnzimmer current 22.8 target 23
2019-10-04 16:08:01.923 - debug: heatingcontrol.0 check time for Bad Profiles.0.Bad.Mo-Fr.Periods.0.time 17
2019-10-04 16:08:01.923 - debug: heatingcontrol.0 check ID Profiles.0.Bad.Mo-Fr.Periods.1.time
2019-10-04 16:08:01.923 - debug: heatingcontrol.0 room Wohnzimmer actor hm-rpc.0.IEQ0504267.1.STATE on
2019-10-04 16:08:01.923 - debug: heatingcontrol.0 ### 222 handled
2019-10-04 16:08:01.925 - debug: heatingcontrol.0 ### all StateChange handled
2019-10-04 16:08:01.926 - debug: heatingcontrol.0 check time for Bad Profiles.0.Bad.Mo-Fr.Periods.1.time 22
2019-10-04 16:08:01.926 - debug: heatingcontrol.0 check ID Profiles.0.Bad.Mo-Fr.Periods.2.time
2019-10-04 16:08:01.937 - debug: heatingcontrol.0 check time for Bad Profiles.0.Bad.Mo-Fr.Periods.2.time 17
2019-10-04 16:08:01.937 - debug: heatingcontrol.0 check ID Profiles.0.Bad.Mo-Fr.Periods.3.time
2019-10-04 16:08:01.938 - debug: heatingcontrol.0 ### 17 0 0 0 0 0
2019-10-04 16:08:01.938 - info: heatingcontrol.0 room Bad Thermostat Heizung Bad 1.SETPOINT set to 17
2019-10-04 16:08:01.943 - debug: heatingcontrol.0 check room Hobby
2019-10-04 16:08:01.943 - debug: heatingcontrol.0 number of periods 4
2019-10-04 16:08:01.943 - debug: heatingcontrol.0 check ID Profiles.0.Hobby.Mo-Fr.Periods.0.time
2019-10-04 16:08:01.948 - debug: heatingcontrol.0 check time for Hobby Profiles.0.Hobby.Mo-Fr.Periods.0.time 19
2019-10-04 16:08:01.948 - debug: heatingcontrol.0 check ID Profiles.0.Hobby.Mo-Fr.Periods.1.time
2019-10-04 16:08:01.950 - debug: heatingcontrol.0 check time for Hobby Profiles.0.Hobby.Mo-Fr.Periods.1.time 24
2019-10-04 16:08:01.951 - debug: heatingcontrol.0 check ID Profiles.0.Hobby.Mo-Fr.Periods.2.time
2019-10-04 16:08:01.953 - debug: heatingcontrol.0 check ID Profiles.0.Hobby.Mo-Fr.Periods.3.time
2019-10-04 16:08:01.965 - debug: heatingcontrol.0 ### 24 0 0 0 0 0
2019-10-04 16:08:01.965 - info: heatingcontrol.0 room Hobby Thermostat Thermostat Hobby 1.SETPOINT set to 24
2019-10-04 16:08:01.974 - debug: heatingcontrol.0 ### handle state change hm-rpc.0.GEQ0171035.2.SETPOINT {"val":24,"ack":false,"ts":1570198081966,"q":0,"from":"system.adapter.heatingcontrol.0","user":"system.user.admin","lc":1570184159724}
2019-10-04 16:08:01.974 - debug: heatingcontrol.0 ### 111 not handled
2019-10-04 16:08:01.974 - debug: heatingcontrol.0 handle actors hm-rpc.0.GEQ0171035.2.SETPOINT{"val":24,"ack":false,"ts":1570198081966,"q":0,"from":"system.adapter.heatingcontrol.0","user":"system.user.admin","lc":1570184159724}
2019-10-04 16:08:01.974 - debug: heatingcontrol.0 ### {"id":3,"name":"Thermostat Hobby 1.SETPOINT","OID_Current":"hm-rpc.0.GEQ0171035.1.TEMPERATURE","OID_Target":"hm-rpc.0.GEQ0171035.2.SETPOINT","isActive":true,"type":1,"room":"Hobby"}
2019-10-04 16:08:01.982 - debug: heatingcontrol.0 cron jobs
2019-10-04 16:08:01.983 - debug: heatingcontrol.0 [INFO] status = true next event: 1 Oct 2020 00:05:00
2019-10-04 16:08:01.994 - debug: heatingcontrol.0 [INFO] status = true next event: 31 Mar 2020 23:55:00
2019-10-04 16:08:01.995 - debug: heatingcontrol.0 [INFO] status = true next event: 7 Oct 2019 00:00:00
2019-10-04 16:08:02.000 - debug: heatingcontrol.0 [INFO] status = true next event: 7 Oct 2019 14:00:00
2019-10-04 16:08:02.001 - debug: heatingcontrol.0 [INFO] status = true next event: 4 Oct 2019 22:30:00
2019-10-04 16:08:02.001 - debug: heatingcontrol.0 [INFO] status = true next event: 5 Oct 2019 00:00:00
2019-10-04 16:08:02.001 - debug: heatingcontrol.0 [INFO] status = true next event: 5 Oct 2019 08:00:00
2019-10-04 16:08:02.002 - debug: heatingcontrol.0 [INFO] status = true next event: 5 Oct 2019 22:00:00
2019-10-04 16:08:02.002 - debug: heatingcontrol.0 [INFO] status = true next event: 7 Oct 2019 04:00:00
2019-10-04 16:08:02.002 - debug: heatingcontrol.0 [INFO] status = true next event: 7 Oct 2019 05:00:00
2019-10-04 16:08:02.007 - debug: heatingcontrol.0 [INFO] status = true next event: 4 Oct 2019 17:00:00
2019-10-04 16:08:02.007 - debug: heatingcontrol.0 [INFO] status = true next event: 5 Oct 2019 06:00:00
2019-10-04 16:08:02.008 - debug: heatingcontrol.0 [INFO] status = true next event: 5 Oct 2019 23:00:00
2019-10-04 16:08:02.009 - debug: heatingcontrol.0 [INFO] status = true next event: 7 Oct 2019 07:30:00
2019-10-04 16:08:02.009 - debug: heatingcontrol.0 [INFO] status = true next event: 5 Oct 2019 05:00:00
2019-10-04 16:08:02.009 - debug: heatingcontrol.0 [INFO] status = true next event: 5 Oct 2019 12:00:00
2019-10-04 16:08:02.010 - debug: heatingcontrol.0 [INFO] status = true next event: 5 Oct 2019 16:00:00
2019-10-04 16:08:02.012 - info: heatingcontrol.0 handle actors Hobby current 23.2 target 24
2019-10-04 16:08:02.013 - warn: heatingcontrol.0 Empty ID: {"val":true,"from":"system.adapter.heatingcontrol.0","user":"system.user.admin"}
2019-10-04 16:08:46.878 - debug: heatingcontrol.0 ### handle state change hm-rpc.0.HEQ0366475.2.SETPOINT {"val":23,"ack":true,"ts":1570198126876,"q":0,"from":"system.adapter.hm-rpc.0","user":"system.user.admin","lc":1570190400054}
2019-10-04 16:08:46.878 - debug: heatingcontrol.0 ### 111 not handled
2019-10-04 16:08:46.878 - debug: heatingcontrol.0 handle actors hm-rpc.0.HEQ0366475.2.SETPOINT{"val":23,"ack":true,"ts":1570198126876,"q":0,"from":"system.adapter.hm-rpc.0","user":"system.user.admin","lc":1570190400054}
2019-10-04 16:08:46.878 - debug: heatingcontrol.0 ### {"id":6,"name":"Heizung Wohnzimmer 1.SETPOINT","OID_Current":"hm-rpc.0.HEQ0366475.1.TEMPERATURE","OID_Target":"hm-rpc.0.HEQ0366475.2.SETPOINT","isActive":true,"type":1,"room":"Wohnzimmer"}
2019-10-04 16:08:46.881 - info: heatingcontrol.0 handle actors Wohnzimmer current 22.8 target 23
2019-10-04 16:08:46.887 - debug: heatingcontrol.0 room Wohnzimmer actor hm-rpc.0.IEQ0504267.1.STATE on
2019-10-04 16:08:46.889 - debug: heatingcontrol.0 ### 222 handled
2019-10-04 16:08:46.889 - debug: heatingcontrol.0 ### all StateChange handled
2019-10-04 16:08:46.890 - debug: heatingcontrol.0 ### handle state change hm-rpc.0.HEQ0366475.1.TEMPERATURE {"val":22.8,"ack":true,"ts":1570198126887,"q":0,"from":"system.adapter.hm-rpc.0","user":"system.user.admin","lc":1570197947846}
2019-10-04 16:08:46.890 - debug: heatingcontrol.0 ### 111 not handled
2019-10-04 16:08:46.890 - debug: heatingcontrol.0 handle actors hm-rpc.0.HEQ0366475.1.TEMPERATURE{"val":22.8,"ack":true,"ts":1570198126887,"q":0,"from":"system.adapter.hm-rpc.0","user":"system.user.admin","lc":1570197947846}
2019-10-04 16:08:46.890 - debug: heatingcontrol.0 ### {"id":6,"name":"Heizung Wohnzimmer 1.SETPOINT","OID_Current":"hm-rpc.0.HEQ0366475.1.TEMPERATURE","OID_Target":"hm-rpc.0.HEQ0366475.2.SETPOINT","isActive":true,"type":1,"room":"Wohnzimmer"}
2019-10-04 16:08:46.896 - info: heatingcontrol.0 handle actors Wohnzimmer current 22.8 target 23
2019-10-04 16:08:46.898 - debug: heatingcontrol.0 room Wohnzimmer actor hm-rpc.0.IEQ0504267.1.STATE on
2019-10-04 16:08:46.899 - debug: heatingcontrol.0 ### 222 handled
2019-10-04 16:08:46.899 - debug: heatingcontrol.0 ### all StateChange handled 

[Rene_HM]

@holgerwolf Du scheinst "Aktoren verwendet" aktiv zu haben. Benötigst du das? Im Normalfall schalten doch die Thermostate die Aktoren direkt...

[xADDRx]

Hallo zusammen,

hat einer von euch eine übersichtliches Widget (view) die er zur Verfügung stellen würde?

Danke

Gruß
Ben

[Rene_HM]

@xADDRx siehe https://forum.iobroker.net/topic/22579/adapter-heatingcontrol/81
Ich selbst verwende derzeit auch noch das Vis vom Script - Vorbild. Musste nur die Datenpunkte anpassen

[holgerwolf]

@Rene_HM Ich habe sowohl Räume mit Thermostat gesteuerten Heizkörperregler als auch Fußbodenheizung die über Aktoren geschaltet werden. Das klappt auch alles prima, bis auf die Warning.

[maarten]

@Rene_HM

Vielen Dank für deine Antwort, ich bin leider erst jetzt dazu gekommen. Ist mir bewusst, dass diese Adapterversion noch in Entwicklung ist, bis jetzt funktioniert Sie jedoch ganz gut.

Ich musste mich kurz einlesen wie man einen Adapter debut und hoffe ich habe soweit alles richtig gemacht:

Spoiler

undefined2019-10-04 23:46:51.627 - info: host.Home-PC object change system.adapter.heatingcontrol.0
2019-10-04 23:46:51.642 - info: host.Home-PC instance system.adapter.heatingcontrol.0 started with pid 7708
2019-10-04 23:46:52.828 - debug: heatingcontrol.0 objectDB connected
2019-10-04 23:46:52.859 - debug: heatingcontrol.0 statesDB connected
2019-10-04 23:46:52.953 - info: heatingcontrol.0 starting. Version 0.3.0 in C:/ioBroker/node_modules/iobroker.heatingcontrol, node: v10.14.1
2019-10-04 23:46:52.968 - debug: heatingcontrol.0 devices [{"id":1,"name":"EG_Wohnzimmer_Heizung_11_Kanal4.SET_TEMPERATURE","OID_Current":"hm-rpc.1.000E570999A5A3.1.ACTUAL_TEMPERATURE","OID_Target":"hm-rpc.0.OEQ0846278.4.SET_TEMPERATURE","isActive":true,"type":1,"room":"EG_Wohnzimmer"},{"id":2,"name":"EG_Wohnzimmer_Heizung_11_Kanal4.SET_TEMPERATURE","OID_Target":"hm-rpc.0.OEQ0846278.4.SET_TEMPERATURE","isActive":true,"type":2,"room":"EG_Wohnzimmer"},{"id":3,"name":"EG_Wohnzimmer_Heizung_12_Kanal4.SET_TEMPERATURE","OID_Target":"hm-rpc.0.OEQ0843010.4.SET_TEMPERATURE","isActive":true,"type":2,"room":"EG_Wohnzimmer"},{"id":4,"name":"EG_Wohnzimmer_Tuere_11_Kanal1.STATE","OID_Current":"hm-rpc.0.OEQ0440463.1.STATE","isActive":true,"type":3,"room":"EG_Wohnzimmer"},{"id":5,"name":"EG_Gang_Tuere_11_Kanal1.STATE","OID_Current":"hm-rpc.0.OEQ0440750.1.STATE","isActive":true,"type":3,"room":"EG_Wohnzimmer"},{"id":6,"name":"EG_Küche_Fenster_11_Kanal1.STATE","OID_Current":"hm-rpc.0.OEQ0566085.1.STATE","isActive":true,"type":3,"room":"EG_Wohnzimmer"},{"id":7,"name":"EG_Wohnzimmer_Heizung_12_Kanal4.SET_TEMPERATURE","OID_Current":"hm-rpc.1.000E570999A5A3.1.ACTUAL_TEMPERATURE","OID_Target":"hm-rpc.0.OEQ0843010.4.SET_TEMPERATURE","isActive":true,"type":1,"room":"EG_Wohnzimmer"},{"id":8,"name":"EG_Gang_Heizung_11_Kanal4.SET_TEMPERATURE","OID_Current":"hm-rpc.1.000E570999A5A3.1.ACTUAL_TEMPERATURE","OID_Target":"hm-rpc.0.OEQ0843134.4.SET_TEMPERATURE","isActive":true,"type":1,"room":"EG_Wohnzimmer"},{"id":9,"name":"EG_Wohnzimmer_Tuere_11_Kanal1.STATE","OID_Current":"hm-rpc.0.OEQ0440463.1.STATE","isActive":true,"type":3,"room":"EG_Wohnzimmer"},{"id":10,"name":"1OG_Schlafzimmer_Heizung_11_Kanal4.SET_TEMPERATURE","OID_Current":"hm-rpc.1.000E570999A397.1.ACTUAL_TEMPERATURE","OID_Target":"hm-rpc.0.OEQ0841727.4.SET_TEMPERATURE","isActive":false,"type":1,"room":"1OG_Schlafzimmer"},{"id":11,"name":"1OG_Schlafzimmer_Fenster_11_Kanal1.STATE","OID_Current":"hm-rpc.0.OEQ0566218.1.STATE","isActive":false,"type":3,"room":"1OG_Schlafzimmer"},{"id":12,"name":"1OG_Schlafzimmer_Tuere_11_Kanal1.STATE","OID_Current":"hm-rpc.0.OEQ0566065.1.STATE","isActive":false,"type":3,"room":"1OG_Schlafzimmer"},{"id":13,"name":"1OG_Kinderzimmer1_Heizung_11_Kanal4.SET_TEMPERATURE","OID_Current":"hm-rpc.1.000E570999A3A5.1.ACTUAL_TEMPERATURE","OID_Target":"hm-rpc.0.OEQ0844685.4.SET_TEMPERATURE","isActive":true,"type":1,"room":"1OG_Kinderzimmer1"},{"id":14,"name":"1OG_Kinderzimmer1_Fenster_11_Kanal1.STATE","OID_Current":"hm-rpc.0.OEQ0568166.1.STATE","isActive":true,"type":3,"room":"1OG_Kinderzimmer1"},{"id":15,"name":"1OG_Kinderzimmer 2_Heizung_11_Kanal4.SET_TEMPERATURE","OID_Current":"hm-rpc.1.000E570999A87B.1.ACTUAL_TEMPERATURE","OID_Target":"hm-rpc.0.OEQ1248833.4.SET_TEMPERATURE","isActive":true,"type":1,"room":"1OG_Kinderzimmer2"},{"id":16,"name":"1OG_Kinderzimmer2_Fenster_11_Kanal1.STATE","OID_Current":"hm-rpc.0.OEQ0440292.1.STATE","isActive":true,"type":3,"room":"1OG_Kinderzimmer2"},{"id":17,"name":"2OG_Schlafzimmer_Heizung_11_Kanal4.SET_TEMPERATURE","OID_Current":"hm-rpc.1.000E570999A890.1.ACTUAL_TEMPERATURE","OID_Target":"hm-rpc.0.OEQ0846127.4.SET_TEMPERATURE","isActive":true,"type":1,"room":"2OG_Schlafzimmer"},{"id":18,"name":"hm-rpc.1.000E570999A890.1.ACTUAL_TEMPERATURE","OID_Current":"hm-rpc.1.000E570999A890.1.ACTUAL_TEMPERATURE","OID_Target":"hm-rpc.0.OEQ0846141.4.SET_TEMPERATURE","isActive":true,"type":1,"room":"2OG_Schlafzimmer"},{"id":19,"name":"2OG_Schlafzimmer_Fenster_11_Kanal1.STATE","OID_Current":"hm-rpc.0.OEQ0496790.1.STATE","isActive":true,"type":3,"room":"2OG_Schlafzimmer"},{"id":20,"name":"2OG_Schlafzimmer_Fenster_12_Kanal1.STATE","OID_Current":"hm-rpc.0.OEQ0496601.1.STATE","isActive":true,"type":3,"room":"2OG_Schlafzimmer"},{"id":21,"name":"2OG_Schlafzimmer_Fenster_13_Kanal1.STATE","OID_Current":"hm-rpc.0.OEQ0496803.1.STATE","isActive":true,"type":3,"room":"2OG_Schlafzimmer"},{"id":22,"name":"2OG_Schlafzimmer_Fenster_14_Kanal1.STATE","OID_Current":"hm-rpc.0.OEQ0496795.1.STATE","isActive":true,"type":3,"room":"2OG_Schlafzimmer"},{"id":23,"name":"2OG_Buero1_Heizung_11_Kanal4.SET_TEMPERATURE","OID_Current":"hm-rpc.1.000E570999A5AF.1.ACTUAL_TEMPERATURE","OID_Target":"hm-rpc.0.OEQ0845933.4.SET_TEMPERATURE","isActive":true,"type":1,"room":"2OG_Buero1"},{"id":24,"name":"2OG_Buero11_Fenster_11_Kanal1.STATE","OID_Current":"hm-rpc.0.OEQ0564053.1.STATE","isActive":true,"type":3,"room":"2OG_Buero1"},{"id":25,"name":"2OG_Buero2_Heizung_11_Kanal4.SET_TEMPERATURE","OID_Current":"hm-rpc.1.000E570999A419.1.ACTUAL_TEMPERATURE","OID_Target":"hm-rpc.0.OEQ0846143.4.SET_TEMPERATURE","isActive":true,"type":1,"room":"2OG_Buero2"},{"id":26,"name":"2OG_Buero2_Fenster_11_Kanal1.STATE","OID_Current":"hm-rpc.0.OEQ0496792.1.STATE","isActive":true,"type":3,"room":"2OG_Buero2"},{"id":27,"name":"2OG_Buero2_Fenster_12_Kanal1.STATE","OID_Current":"hm-rpc.0.OEQ0441055.1.STATE","isActive":true,"type":3,"room":"2OG_Buero2"},{"id":28,"name":"2OG_Buero2_Fenster_13_Kanal1.STATE","OID_Current":"hm-rpc.0.OEQ0496740.1.STATE","isActive":true,"type":3,"room":"2OG_Buero2"},{"id":29,"name":"2OG_Bad_Heizung_11_Kanal4.SET_TEMPERATURE","OID_Current":"hm-rpc.1.000E570999A897.1.ACTUAL_TEMPERATURE","OID_Target":"hm-rpc.0.OEQ0845830.4.SET_TEMPERATURE","isActive":true,"type":1,"room":"2OG_Bad"},{"id":30,"name":"2OG_Bad_Fenster_11_Kanal1.STATE","OID_Current":"hm-rpc.0.OEQ0566263.1.STATE","isActive":true,"type":3,"room":"2OG_Bad"}]
2019-10-04 23:46:52.968 - debug: heatingcontrol.0 CreateDatepoints
2019-10-04 23:46:53.171 - debug: heatingcontrol.0 rooms 19
2019-10-04 23:46:53.171 - debug: heatingcontrol.0 create data points for EG_Wohnzimmer
2019-10-04 23:46:53.218 - debug: heatingcontrol.0 room EG_Wohnzimmer with 3 periods
2019-10-04 23:46:53.218 - debug: heatingcontrol.0 Profile Type Mo-So, profiles 2
2019-10-04 23:46:53.218 - debug: heatingcontrol.0 add state Profiles.0.EG_Wohnzimmer.Mo-Su.Periods.0 max 5
2019-10-04 23:46:53.218 - debug: heatingcontrol.0 add state Profiles.0.EG_Wohnzimmer.Mo-Su.Periods.1 max 5
2019-10-04 23:46:53.218 - debug: heatingcontrol.0 add state Profiles.0.EG_Wohnzimmer.Mo-Su.Periods.2 max 5
2019-10-04 23:46:53.218 - debug: heatingcontrol.0 not active.... EG_Kueche
2019-10-04 23:46:53.218 - debug: heatingcontrol.0 create data points for 1OG_Schlafzimmer
2019-10-04 23:46:53.265 - debug: heatingcontrol.0 room 1OG_Schlafzimmer with 3 periods
2019-10-04 23:46:53.265 - debug: heatingcontrol.0 Profile Type Mo-So, profiles 2
2019-10-04 23:46:53.265 - debug: heatingcontrol.0 add state Profiles.0.1OG_Schlafzimmer.Mo-Su.Periods.0 max 5
2019-10-04 23:46:53.265 - debug: heatingcontrol.0 add state Profiles.0.1OG_Schlafzimmer.Mo-Su.Periods.1 max 5
2019-10-04 23:46:53.265 - debug: heatingcontrol.0 add state Profiles.0.1OG_Schlafzimmer.Mo-Su.Periods.2 max 5
2019-10-04 23:46:53.265 - debug: heatingcontrol.0 create data points for 1OG_Kinderzimmer1
2019-10-04 23:46:53.327 - debug: heatingcontrol.0 room 1OG_Kinderzimmer1 with 3 periods
2019-10-04 23:46:53.327 - debug: heatingcontrol.0 Profile Type Mo-So, profiles 2
2019-10-04 23:46:53.327 - debug: heatingcontrol.0 add state Profiles.0.1OG_Kinderzimmer1.Mo-Su.Periods.0 max 5
2019-10-04 23:46:53.327 - debug: heatingcontrol.0 add state Profiles.0.1OG_Kinderzimmer1.Mo-Su.Periods.1 max 5
2019-10-04 23:46:53.327 - debug: heatingcontrol.0 add state Profiles.0.1OG_Kinderzimmer1.Mo-Su.Periods.2 max 5
2019-10-04 23:46:53.327 - debug: heatingcontrol.0 create data points for 1OG_Kinderzimmer2
2019-10-04 23:46:53.374 - debug: heatingcontrol.0 room 1OG_Kinderzimmer2 with 3 periods
2019-10-04 23:46:53.374 - debug: heatingcontrol.0 Profile Type Mo-So, profiles 2
2019-10-04 23:46:53.374 - debug: heatingcontrol.0 add state Profiles.0.1OG_Kinderzimmer2.Mo-Su.Periods.0 max 5
2019-10-04 23:46:53.374 - debug: heatingcontrol.0 add state Profiles.0.1OG_Kinderzimmer2.Mo-Su.Periods.1 max 5
2019-10-04 23:46:53.374 - debug: heatingcontrol.0 add state Profiles.0.1OG_Kinderzimmer2.Mo-Su.Periods.2 max 5
2019-10-04 23:46:53.374 - debug: heatingcontrol.0 not active.... EG_Bad
2019-10-04 23:46:53.374 - debug: heatingcontrol.0 not active.... EG_Garten
2019-10-04 23:46:53.374 - debug: heatingcontrol.0 not active.... 1OG_Bad
2019-10-04 23:46:53.374 - debug: heatingcontrol.0 not active.... EG_Gang
2019-10-04 23:46:53.374 - debug: heatingcontrol.0 not active.... 1OG_Gang
2019-10-04 23:46:53.374 - debug: heatingcontrol.0 create data points for 2OG_Schlafzimmer
2019-10-04 23:46:53.421 - debug: heatingcontrol.0 room 2OG_Schlafzimmer with 3 periods
2019-10-04 23:46:53.421 - debug: heatingcontrol.0 Profile Type Mo-So, profiles 2
2019-10-04 23:46:53.421 - debug: heatingcontrol.0 add state Profiles.0.2OG_Schlafzimmer.Mo-Su.Periods.0 max 5
2019-10-04 23:46:53.421 - debug: heatingcontrol.0 add state Profiles.0.2OG_Schlafzimmer.Mo-Su.Periods.1 max 5
2019-10-04 23:46:53.421 - debug: heatingcontrol.0 add state Profiles.0.2OG_Schlafzimmer.Mo-Su.Periods.2 max 5
2019-10-04 23:46:53.421 - debug: heatingcontrol.0 create data points for 2OG_Buero1
2019-10-04 23:46:53.467 - debug: heatingcontrol.0 room 2OG_Buero1 with 3 periods
2019-10-04 23:46:53.467 - debug: heatingcontrol.0 Profile Type Mo-So, profiles 2
2019-10-04 23:46:53.467 - debug: heatingcontrol.0 add state Profiles.0.2OG_Buero1.Mo-Su.Periods.0 max 5
2019-10-04 23:46:53.467 - debug: heatingcontrol.0 add state Profiles.0.2OG_Buero1.Mo-Su.Periods.1 max 5
2019-10-04 23:46:53.467 - debug: heatingcontrol.0 add state Profiles.0.2OG_Buero1.Mo-Su.Periods.2 max 5
2019-10-04 23:46:53.467 - debug: heatingcontrol.0 create data points for 2OG_Buero2
2019-10-04 23:46:53.530 - debug: heatingcontrol.0 room 2OG_Buero2 with 3 periods
2019-10-04 23:46:53.530 - debug: heatingcontrol.0 Profile Type Mo-So, profiles 2
2019-10-04 23:46:53.530 - debug: heatingcontrol.0 add state Profiles.0.2OG_Buero2.Mo-Su.Periods.0 max 5
2019-10-04 23:46:53.530 - debug: heatingcontrol.0 add state Profiles.0.2OG_Buero2.Mo-Su.Periods.1 max 5
2019-10-04 23:46:53.530 - debug: heatingcontrol.0 add state Profiles.0.2OG_Buero2.Mo-Su.Periods.2 max 5
2019-10-04 23:46:53.530 - debug: heatingcontrol.0 not active.... 2OG_Gang
2019-10-04 23:46:53.530 - debug: heatingcontrol.0 create data points for 2OG_Bad
2019-10-04 23:46:53.577 - debug: heatingcontrol.0 room 2OG_Bad with 3 periods
2019-10-04 23:46:53.577 - debug: heatingcontrol.0 Profile Type Mo-So, profiles 2
2019-10-04 23:46:53.577 - debug: heatingcontrol.0 add state Profiles.0.2OG_Bad.Mo-Su.Periods.0 max 5
2019-10-04 23:46:53.577 - debug: heatingcontrol.0 add state Profiles.0.2OG_Bad.Mo-Su.Periods.1 max 5
2019-10-04 23:46:53.577 - debug: heatingcontrol.0 add state Profiles.0.2OG_Bad.Mo-Su.Periods.2 max 5
2019-10-04 23:46:53.577 - debug: heatingcontrol.0 not active.... UG_Waschkueche
2019-10-04 23:46:53.577 - debug: heatingcontrol.0 not active.... UG_Vorratsraum
2019-10-04 23:46:53.577 - debug: heatingcontrol.0 not active.... UG_Heizung
2019-10-04 23:46:53.577 - debug: heatingcontrol.0 not active.... UG_Gang
2019-10-04 23:46:53.577 - debug: heatingcontrol.0 rooms 19
2019-10-04 23:46:53.577 - debug: heatingcontrol.0 create data points for EG_Wohnzimmer
2019-10-04 23:46:53.639 - debug: heatingcontrol.0 room EG_Wohnzimmer with 3 periods
2019-10-04 23:46:53.639 - debug: heatingcontrol.0 Profile Type Mo-So, profiles 2
2019-10-04 23:46:53.639 - debug: heatingcontrol.0 add state Profiles.1.EG_Wohnzimmer.Mo-Su.Periods.0 max 5
2019-10-04 23:46:53.639 - debug: heatingcontrol.0 add state Profiles.1.EG_Wohnzimmer.Mo-Su.Periods.1 max 5
2019-10-04 23:46:53.639 - debug: heatingcontrol.0 add state Profiles.1.EG_Wohnzimmer.Mo-Su.Periods.2 max 5
2019-10-04 23:46:53.639 - debug: heatingcontrol.0 not active.... EG_Kueche
2019-10-04 23:46:53.639 - debug: heatingcontrol.0 create data points for 1OG_Schlafzimmer
2019-10-04 23:46:53.686 - debug: heatingcontrol.0 room 1OG_Schlafzimmer with 3 periods
2019-10-04 23:46:53.686 - debug: heatingcontrol.0 Profile Type Mo-So, profiles 2
2019-10-04 23:46:53.686 - debug: heatingcontrol.0 add state Profiles.1.1OG_Schlafzimmer.Mo-Su.Periods.0 max 5
2019-10-04 23:46:53.686 - debug: heatingcontrol.0 add state Profiles.1.1OG_Schlafzimmer.Mo-Su.Periods.1 max 5
2019-10-04 23:46:53.686 - debug: heatingcontrol.0 add state Profiles.1.1OG_Schlafzimmer.Mo-Su.Periods.2 max 5
2019-10-04 23:46:53.686 - debug: heatingcontrol.0 create data points for 1OG_Kinderzimmer1
2019-10-04 23:46:53.717 - debug: heatingcontrol.0 room 1OG_Kinderzimmer1 with 3 periods
2019-10-04 23:46:53.717 - debug: heatingcontrol.0 Profile Type Mo-So, profiles 2
2019-10-04 23:46:53.717 - debug: heatingcontrol.0 add state Profiles.1.1OG_Kinderzimmer1.Mo-Su.Periods.0 max 5
2019-10-04 23:46:53.717 - debug: heatingcontrol.0 add state Profiles.1.1OG_Kinderzimmer1.Mo-Su.Periods.1 max 5
2019-10-04 23:46:53.717 - debug: heatingcontrol.0 add state Profiles.1.1OG_Kinderzimmer1.Mo-Su.Periods.2 max 5
2019-10-04 23:46:53.717 - debug: heatingcontrol.0 create data points for 1OG_Kinderzimmer2
2019-10-04 23:46:53.764 - debug: heatingcontrol.0 room 1OG_Kinderzimmer2 with 3 periods
2019-10-04 23:46:53.764 - debug: heatingcontrol.0 Profile Type Mo-So, profiles 2
2019-10-04 23:46:53.764 - debug: heatingcontrol.0 add state Profiles.1.1OG_Kinderzimmer2.Mo-Su.Periods.0 max 5
2019-10-04 23:46:53.764 - debug: heatingcontrol.0 add state Profiles.1.1OG_Kinderzimmer2.Mo-Su.Periods.1 max 5
2019-10-04 23:46:53.764 - debug: heatingcontrol.0 add state Profiles.1.1OG_Kinderzimmer2.Mo-Su.Periods.2 max 5
2019-10-04 23:46:53.764 - debug: heatingcontrol.0 not active.... EG_Bad
2019-10-04 23:46:53.764 - debug: heatingcontrol.0 not active.... EG_Garten
2019-10-04 23:46:53.764 - debug: heatingcontrol.0 not active.... 1OG_Bad
2019-10-04 23:46:53.764 - debug: heatingcontrol.0 not active.... EG_Gang
2019-10-04 23:46:53.764 - debug: heatingcontrol.0 not active.... 1OG_Gang
2019-10-04 23:46:53.764 - debug: heatingcontrol.0 create data points for 2OG_Schlafzimmer
2019-10-04 23:46:53.935 - debug: heatingcontrol.0 room 2OG_Schlafzimmer with 3 periods
2019-10-04 23:46:53.935 - debug: heatingcontrol.0 Profile Type Mo-So, profiles 2
2019-10-04 23:46:53.935 - debug: heatingcontrol.0 add state Profiles.1.2OG_Schlafzimmer.Mo-Su.Periods.0 max 5
2019-10-04 23:46:53.935 - debug: heatingcontrol.0 add state Profiles.1.2OG_Schlafzimmer.Mo-Su.Periods.1 max 5
2019-10-04 23:46:53.935 - debug: heatingcontrol.0 add state Profiles.1.2OG_Schlafzimmer.Mo-Su.Periods.2 max 5
2019-10-04 23:46:53.935 - debug: heatingcontrol.0 create data points for 2OG_Buero1
2019-10-04 23:46:53.982 - debug: heatingcontrol.0 room 2OG_Buero1 with 3 periods
2019-10-04 23:46:53.982 - debug: heatingcontrol.0 Profile Type Mo-So, profiles 2
2019-10-04 23:46:53.982 - debug: heatingcontrol.0 add state Profiles.1.2OG_Buero1.Mo-Su.Periods.0 max 5
2019-10-04 23:46:53.982 - debug: heatingcontrol.0 add state Profiles.1.2OG_Buero1.Mo-Su.Periods.1 max 5
2019-10-04 23:46:53.982 - debug: heatingcontrol.0 add state Profiles.1.2OG_Buero1.Mo-Su.Periods.2 max 5
2019-10-04 23:46:53.982 - debug: heatingcontrol.0 create data points for 2OG_Buero2
2019-10-04 23:46:54.029 - debug: heatingcontrol.0 room 2OG_Buero2 with 3 periods
2019-10-04 23:46:54.029 - debug: heatingcontrol.0 Profile Type Mo-So, profiles 2
2019-10-04 23:46:54.029 - debug: heatingcontrol.0 add state Profiles.1.2OG_Buero2.Mo-Su.Periods.0 max 5
2019-10-04 23:46:54.029 - debug: heatingcontrol.0 add state Profiles.1.2OG_Buero2.Mo-Su.Periods.1 max 5
2019-10-04 23:46:54.029 - debug: heatingcontrol.0 add state Profiles.1.2OG_Buero2.Mo-Su.Periods.2 max 5
2019-10-04 23:46:54.029 - debug: heatingcontrol.0 not active.... 2OG_Gang
2019-10-04 23:46:54.029 - debug: heatingcontrol.0 create data points for 2OG_Bad
2019-10-04 23:46:54.091 - debug: heatingcontrol.0 room 2OG_Bad with 3 periods
2019-10-04 23:46:54.091 - debug: heatingcontrol.0 Profile Type Mo-So, profiles 2
2019-10-04 23:46:54.091 - debug: heatingcontrol.0 add state Profiles.1.2OG_Bad.Mo-Su.Periods.0 max 5
2019-10-04 23:46:54.091 - debug: heatingcontrol.0 add state Profiles.1.2OG_Bad.Mo-Su.Periods.1 max 5
2019-10-04 23:46:54.091 - debug: heatingcontrol.0 add state Profiles.1.2OG_Bad.Mo-Su.Periods.2 max 5
2019-10-04 23:46:54.091 - debug: heatingcontrol.0 not active.... UG_Waschkueche
2019-10-04 23:46:54.091 - debug: heatingcontrol.0 not active.... UG_Vorratsraum
2019-10-04 23:46:54.091 - debug: heatingcontrol.0 not active.... UG_Heizung
2019-10-04 23:46:54.091 - debug: heatingcontrol.0 not active.... UG_Gang
2019-10-04 23:46:54.091 - debug: heatingcontrol.0 #start subscribtion
2019-10-04 23:46:54.091 - debug: heatingcontrol.0 subscribe EG_Wohnzimmer hm-rpc.0.OEQ0440463.1.STATE
2019-10-04 23:46:54.091 - debug: heatingcontrol.0 subscribe EG_Wohnzimmer hm-rpc.0.OEQ0440750.1.STATE
2019-10-04 23:46:54.091 - debug: heatingcontrol.0 subscribe EG_Wohnzimmer hm-rpc.0.OEQ0566085.1.STATE
2019-10-04 23:46:54.091 - debug: heatingcontrol.0 subscribe EG_Wohnzimmer hm-rpc.0.OEQ0440463.1.STATE
2019-10-04 23:46:54.091 - debug: heatingcontrol.0 subscribe 1OG_Kinderzimmer1 hm-rpc.0.OEQ0568166.1.STATE
2019-10-04 23:46:54.091 - debug: heatingcontrol.0 subscribe 1OG_Kinderzimmer2 hm-rpc.0.OEQ0440292.1.STATE
2019-10-04 23:46:54.091 - debug: heatingcontrol.0 subscribe 2OG_Schlafzimmer hm-rpc.0.OEQ0496790.1.STATE
2019-10-04 23:46:54.091 - debug: heatingcontrol.0 subscribe 2OG_Schlafzimmer hm-rpc.0.OEQ0496601.1.STATE
2019-10-04 23:46:54.091 - debug: heatingcontrol.0 subscribe 2OG_Schlafzimmer hm-rpc.0.OEQ0496803.1.STATE
2019-10-04 23:46:54.091 - debug: heatingcontrol.0 subscribe 2OG_Schlafzimmer hm-rpc.0.OEQ0496795.1.STATE
2019-10-04 23:46:54.091 - debug: heatingcontrol.0 subscribe 2OG_Buero1 hm-rpc.0.OEQ0564053.1.STATE
2019-10-04 23:46:54.091 - debug: heatingcontrol.0 subscribe 2OG_Buero2 hm-rpc.0.OEQ0496792.1.STATE
2019-10-04 23:46:54.091 - debug: heatingcontrol.0 subscribe 2OG_Buero2 hm-rpc.0.OEQ0441055.1.STATE
2019-10-04 23:46:54.091 - debug: heatingcontrol.0 subscribe 2OG_Buero2 hm-rpc.0.OEQ0496740.1.STATE
2019-10-04 23:46:54.091 - debug: heatingcontrol.0 subscribe 2OG_Bad hm-rpc.0.OEQ0566263.1.STATE
2019-10-04 23:46:54.091 - debug: heatingcontrol.0 #subscribtion finished
2019-10-04 23:46:54.091 - debug: heatingcontrol.0 start CalculateNextTime, profile type 1
2019-10-04 23:46:54.091 - debug: heatingcontrol.0 get profile
2019-10-04 23:46:54.123 - debug: heatingcontrol.0 profile 0
2019-10-04 23:46:54.154 - debug: heatingcontrol.0 ---found time for EG_Wohnzimmer at {"val":"00:00","ack":true,"ts":1569536219762,"q":0,"from":"system.adapter.heatingcontrol.0","user":"system.user.admin","lc":1569536219559} 00:00
2019-10-04 23:46:54.154 - debug: heatingcontrol.0 push to list = 00,00
2019-10-04 23:46:54.169 - debug: heatingcontrol.0 ---found time for EG_Wohnzimmer at {"val":"06:00","ack":true,"ts":1569528844920,"q":0,"from":"system.adapter.heatingcontrol.0","user":"system.user.admin","lc":1569528844701} 06:00
2019-10-04 23:46:54.169 - debug: heatingcontrol.0 push to list = 06,00
2019-10-04 23:46:54.169 - debug: heatingcontrol.0 ---found time for EG_Wohnzimmer at {"val":"23:00","ack":true,"ts":1569451191041,"q":0,"from":"system.adapter.heatingcontrol.0","user":"system.user.admin","lc":1569451190916} 23:00
2019-10-04 23:46:54.169 - debug: heatingcontrol.0 push to list = 23,00
2019-10-04 23:46:54.169 - debug: heatingcontrol.0 ---found time for 1OG_Schlafzimmer at {"val":"00:00","ack":true,"ts":1569625025328,"q":0,"from":"system.adapter.heatingcontrol.0","user":"system.user.admin","lc":1569625024782} 00:00
2019-10-04 23:46:54.169 - debug: heatingcontrol.0 ---found time for 1OG_Schlafzimmer at {"val":"06:00","ack":true,"ts":1569625002817,"q":0,"from":"system.adapter.heatingcontrol.0","user":"system.user.admin","lc":1569625002162} 06:00
2019-10-04 23:46:54.169 - debug: heatingcontrol.0 ---found time for 1OG_Schlafzimmer at {"val":"23:00","ack":true,"ts":1569625009572,"q":0,"from":"system.adapter.heatingcontrol.0","user":"system.user.admin","lc":1569625009119} 23:00
2019-10-04 23:46:54.169 - debug: heatingcontrol.0 ---found time for 1OG_Kinderzimmer1 at {"val":"00:00","ack":true,"ts":1569625044843,"q":0,"from":"system.adapter.heatingcontrol.0","user":"system.user.admin","lc":1569625044328} 00:00
2019-10-04 23:46:54.185 - debug: heatingcontrol.0 ---found time for 1OG_Kinderzimmer1 at {"val":"06:00","ack":true,"ts":1569625049913,"q":0,"from":"system.adapter.heatingcontrol.0","user":"system.user.admin","lc":1569625049367} 06:00
2019-10-04 23:46:54.201 - debug: heatingcontrol.0 ---found time for 1OG_Kinderzimmer1 at {"val":"23:00","ack":true,"ts":1569625055592,"q":0,"from":"system.adapter.heatingcontrol.0","user":"system.user.admin","lc":1569625054858} 23:00
2019-10-04 23:46:54.201 - debug: heatingcontrol.0 ---found time for 1OG_Kinderzimmer2 at {"val":"00:00","ack":true,"ts":1569625092782,"q":0,"from":"system.adapter.heatingcontrol.0","user":"system.user.admin","lc":1569625092189} 00:00
2019-10-04 23:46:54.201 - debug: heatingcontrol.0 ---found time for 1OG_Kinderzimmer2 at {"val":"06:00","ack":true,"ts":1569625097509,"q":0,"from":"system.adapter.heatingcontrol.0","user":"system.user.admin","lc":1569625096822} 06:00
2019-10-04 23:46:54.232 - debug: heatingcontrol.0 ---found time for 1OG_Kinderzimmer2 at {"val":"23:00","ack":true,"ts":1569625101300,"q":0,"from":"system.adapter.heatingcontrol.0","user":"system.user.admin","lc":1569625100645} 23:00
2019-10-04 23:46:54.232 - debug: heatingcontrol.0 ---found time for 2OG_Schlafzimmer at {"val":"00:00","ack":true,"ts":1569625240249,"q":0,"from":"system.adapter.heatingcontrol.0","user":"system.user.admin","lc":1569625239578} 00:00
2019-10-04 23:46:54.232 - debug: heatingcontrol.0 ---found time for 2OG_Schlafzimmer at {"val":"06:00","ack":true,"ts":1569625244695,"q":0,"from":"system.adapter.heatingcontrol.0","user":"system.user.admin","lc":1569625244087} 06:00
2019-10-04 23:46:54.232 - debug: heatingcontrol.0 ---found time for 2OG_Schlafzimmer at {"val":"23:00","ack":true,"ts":1569625247690,"q":0,"from":"system.adapter.heatingcontrol.0","user":"system.user.admin","lc":1569625247207} 23:00
2019-10-04 23:46:54.247 - debug: heatingcontrol.0 ---found time for 2OG_Buero1 at {"val":"00:00","ack":true,"ts":1569625256021,"q":0,"from":"system.adapter.heatingcontrol.0","user":"system.user.admin","lc":1569625255522} 00:00
2019-10-04 23:46:54.247 - debug: heatingcontrol.0 ---found time for 2OG_Buero1 at {"val":"06:00","ack":true,"ts":1569625260358,"q":0,"from":"system.adapter.heatingcontrol.0","user":"system.user.admin","lc":1569625259718} 06:00
2019-10-04 23:46:54.247 - debug: heatingcontrol.0 ---found time for 2OG_Buero1 at {"val":"23:00","ack":true,"ts":1569625265880,"q":0,"from":"system.adapter.heatingcontrol.0","user":"system.user.admin","lc":1569625265116} 23:00
2019-10-04 23:46:54.247 - debug: heatingcontrol.0 ---found time for 2OG_Buero2 at {"val":"00:00","ack":true,"ts":1569625273524,"q":0,"from":"system.adapter.heatingcontrol.0","user":"system.user.admin","lc":1569625272822} 00:00
2019-10-04 23:46:54.247 - debug: heatingcontrol.0 ---found time for 2OG_Buero2 at {"val":"06:00","ack":true,"ts":1569625276972,"q":0,"from":"system.adapter.heatingcontrol.0","user":"system.user.admin","lc":1569625276316} 06:00
2019-10-04 23:46:54.247 - debug: heatingcontrol.0 ---found time for 2OG_Buero2 at {"val":"23:00","ack":true,"ts":1569625281823,"q":0,"from":"system.adapter.heatingcontrol.0","user":"system.user.admin","lc":1569625281199} 23:00
2019-10-04 23:46:54.263 - debug: heatingcontrol.0 ---found time for 2OG_Bad at {"val":"00:00","ack":true,"ts":1569625291058,"q":0,"from":"system.adapter.heatingcontrol.0","user":"system.user.admin","lc":1569625290419} 00:00
2019-10-04 23:46:54.263 - debug: heatingcontrol.0 ---found time for 2OG_Bad at {"val":"06:00","ack":true,"ts":1569625295848,"q":0,"from":"system.adapter.heatingcontrol.0","user":"system.user.admin","lc":1569625295036} 06:00
2019-10-04 23:46:54.263 - debug: heatingcontrol.0 ---found time for 2OG_Bad at {"val":"23:00","ack":true,"ts":1569625298843,"q":0,"from":"system.adapter.heatingcontrol.0","user":"system.user.admin","lc":1569625298219} 23:00
2019-10-04 23:46:54.263 - debug: heatingcontrol.0 create cron job #0 at 0:0 string: 0 0 0 * * * Europe/Berlin
2019-10-04 23:46:54.279 - debug: heatingcontrol.0 create cron job #1 at 6:0 string: 0 0 6 * * * Europe/Berlin
2019-10-04 23:46:54.279 - debug: heatingcontrol.0 create cron job #2 at 23:0 string: 0 0 23 * * * Europe/Berlin
2019-10-04 23:46:54.279 - debug: heatingcontrol.0 cron jobs
2019-10-04 23:46:54.279 - debug: heatingcontrol.0 [INFO] status = true next event: 5 Oct 2019 00:00:00
2019-10-04 23:46:54.279 - debug: heatingcontrol.0 [INFO] status = true next event: 5 Oct 2019 06:00:00
2019-10-04 23:46:54.294 - debug: heatingcontrol.0 [INFO] status = true next event: 5 Oct 2019 23:00:00
2019-10-04 23:46:54.294 - info: heatingcontrol.0 calculating new target temperatures
2019-10-04 23:46:54.325 - debug: heatingcontrol.0 profile type 1
2019-10-04 23:46:54.325 - debug: heatingcontrol.0 get profile
2019-10-04 23:46:54.325 - debug: heatingcontrol.0 profile 0
2019-10-04 23:46:54.325 - debug: heatingcontrol.0 check room EG_Wohnzimmer
2019-10-04 23:46:54.325 - debug: heatingcontrol.0 number of periods 3
2019-10-04 23:46:54.325 - debug: heatingcontrol.0 check ID Profiles.0.EG_Wohnzimmer.Mo-Su.Periods.0.time
2019-10-04 23:46:54.325 - debug: heatingcontrol.0 check time for EG_Wohnzimmer Profiles.0.EG_Wohnzimmer.Mo-Su.Periods.0.time 18.0
2019-10-04 23:46:54.325 - debug: heatingcontrol.0 check ID Profiles.0.EG_Wohnzimmer.Mo-Su.Periods.1.time
2019-10-04 23:46:54.325 - debug: heatingcontrol.0 check time for EG_Wohnzimmer Profiles.0.EG_Wohnzimmer.Mo-Su.Periods.1.time 22
2019-10-04 23:46:54.325 - debug: heatingcontrol.0 check ID Profiles.0.EG_Wohnzimmer.Mo-Su.Periods.2.time
2019-10-04 23:46:54.341 - debug: heatingcontrol.0 check time for EG_Wohnzimmer Profiles.0.EG_Wohnzimmer.Mo-Su.Periods.2.time 18.0
2019-10-04 23:46:54.341 - debug: heatingcontrol.0 ### 18.0 0 0 0 0 0
2019-10-04 23:46:54.341 - info: heatingcontrol.0 room EG_Wohnzimmer Thermostat EG_Wohnzimmer_Heizung_11_Kanal4.SET_TEMPERATURE set to 18
2019-10-04 23:46:54.341 - info: heatingcontrol.0 room EG_Wohnzimmer Thermostat EG_Wohnzimmer_Heizung_12_Kanal4.SET_TEMPERATURE set to 18
2019-10-04 23:46:54.341 - info: heatingcontrol.0 room EG_Wohnzimmer Thermostat EG_Gang_Heizung_11_Kanal4.SET_TEMPERATURE set to 18
2019-10-04 23:46:54.357 - debug: heatingcontrol.0 check room 1OG_Schlafzimmer
2019-10-04 23:46:54.357 - debug: heatingcontrol.0 number of periods 3
2019-10-04 23:46:54.357 - debug: heatingcontrol.0 check ID Profiles.0.1OG_Schlafzimmer.Mo-Su.Periods.0.time
2019-10-04 23:46:54.357 - debug: heatingcontrol.0 check time for 1OG_Schlafzimmer Profiles.0.1OG_Schlafzimmer.Mo-Su.Periods.0.time 20.0
2019-10-04 23:46:54.357 - debug: heatingcontrol.0 check ID Profiles.0.1OG_Schlafzimmer.Mo-Su.Periods.1.time
2019-10-04 23:46:54.372 - debug: heatingcontrol.0 check time for 1OG_Schlafzimmer Profiles.0.1OG_Schlafzimmer.Mo-Su.Periods.1.time 17.0
2019-10-04 23:46:54.372 - debug: heatingcontrol.0 check ID Profiles.0.1OG_Schlafzimmer.Mo-Su.Periods.2.time
2019-10-04 23:46:54.372 - debug: heatingcontrol.0 check time for 1OG_Schlafzimmer Profiles.0.1OG_Schlafzimmer.Mo-Su.Periods.2.time 20.0
2019-10-04 23:46:54.372 - debug: heatingcontrol.0 ### 20.0 0 0 0 0 0
2019-10-04 23:46:54.372 - debug: heatingcontrol.0 check room 1OG_Kinderzimmer1
2019-10-04 23:46:54.372 - debug: heatingcontrol.0 number of periods 3
2019-10-04 23:46:54.372 - debug: heatingcontrol.0 check ID Profiles.0.1OG_Kinderzimmer1.Mo-Su.Periods.0.time
2019-10-04 23:46:54.388 - debug: heatingcontrol.0 check time for 1OG_Kinderzimmer1 Profiles.0.1OG_Kinderzimmer1.Mo-Su.Periods.0.time 20.0
2019-10-04 23:46:54.388 - debug: heatingcontrol.0 check ID Profiles.0.1OG_Kinderzimmer1.Mo-Su.Periods.1.time
2019-10-04 23:46:54.388 - debug: heatingcontrol.0 check time for 1OG_Kinderzimmer1 Profiles.0.1OG_Kinderzimmer1.Mo-Su.Periods.1.time 17.0
2019-10-04 23:46:54.388 - debug: heatingcontrol.0 check ID Profiles.0.1OG_Kinderzimmer1.Mo-Su.Periods.2.time
2019-10-04 23:46:54.388 - debug: heatingcontrol.0 check time for 1OG_Kinderzimmer1 Profiles.0.1OG_Kinderzimmer1.Mo-Su.Periods.2.time 20.0
2019-10-04 23:46:54.388 - debug: heatingcontrol.0 ### 20.0 0 0 0 0 0
2019-10-04 23:46:54.388 - info: heatingcontrol.0 room 1OG_Kinderzimmer1 Thermostat 1OG_Kinderzimmer1_Heizung_11_Kanal4.SET_TEMPERATURE set to 20
2019-10-04 23:46:54.388 - debug: heatingcontrol.0 check room 1OG_Kinderzimmer2
2019-10-04 23:46:54.388 - debug: heatingcontrol.0 number of periods 3
2019-10-04 23:46:54.388 - debug: heatingcontrol.0 check ID Profiles.0.1OG_Kinderzimmer2.Mo-Su.Periods.0.time
2019-10-04 23:46:54.403 - debug: heatingcontrol.0 check time for 1OG_Kinderzimmer2 Profiles.0.1OG_Kinderzimmer2.Mo-Su.Periods.0.time 17.0
2019-10-04 23:46:54.403 - debug: heatingcontrol.0 check ID Profiles.0.1OG_Kinderzimmer2.Mo-Su.Periods.1.time
2019-10-04 23:46:54.403 - debug: heatingcontrol.0 check time for 1OG_Kinderzimmer2 Profiles.0.1OG_Kinderzimmer2.Mo-Su.Periods.1.time 20.0
2019-10-04 23:46:54.403 - debug: heatingcontrol.0 check ID Profiles.0.1OG_Kinderzimmer2.Mo-Su.Periods.2.time
2019-10-04 23:46:54.403 - debug: heatingcontrol.0 check time for 1OG_Kinderzimmer2 Profiles.0.1OG_Kinderzimmer2.Mo-Su.Periods.2.time 17.0
2019-10-04 23:46:54.403 - debug: heatingcontrol.0 ### 17.0 0 0 0 0 0
2019-10-04 23:46:54.403 - info: heatingcontrol.0 room 1OG_Kinderzimmer2 Thermostat 1OG_Kinderzimmer 2_Heizung_11_Kanal4.SET_TEMPERATURE set to 17
2019-10-04 23:46:54.435 - debug: heatingcontrol.0 check room 2OG_Schlafzimmer
2019-10-04 23:46:54.435 - debug: heatingcontrol.0 number of periods 3
2019-10-04 23:46:54.435 - debug: heatingcontrol.0 check ID Profiles.0.2OG_Schlafzimmer.Mo-Su.Periods.0.time
2019-10-04 23:46:54.435 - debug: heatingcontrol.0 check time for 2OG_Schlafzimmer Profiles.0.2OG_Schlafzimmer.Mo-Su.Periods.0.time 18.0
2019-10-04 23:46:54.435 - debug: heatingcontrol.0 check ID Profiles.0.2OG_Schlafzimmer.Mo-Su.Periods.1.time
2019-10-04 23:46:54.450 - debug: heatingcontrol.0 check time for 2OG_Schlafzimmer Profiles.0.2OG_Schlafzimmer.Mo-Su.Periods.1.time 18.0
2019-10-04 23:46:54.450 - debug: heatingcontrol.0 check ID Profiles.0.2OG_Schlafzimmer.Mo-Su.Periods.2.time
2019-10-04 23:46:54.450 - debug: heatingcontrol.0 check time for 2OG_Schlafzimmer Profiles.0.2OG_Schlafzimmer.Mo-Su.Periods.2.time 18.0
2019-10-04 23:46:54.450 - debug: heatingcontrol.0 ### 18.0 0 0 0 0 0
2019-10-04 23:46:54.450 - info: heatingcontrol.0 room 2OG_Schlafzimmer Thermostat 2OG_Schlafzimmer_Heizung_11_Kanal4.SET_TEMPERATURE set to 18
2019-10-04 23:46:54.450 - info: heatingcontrol.0 room 2OG_Schlafzimmer Thermostat hm-rpc.1.000E570999A890.1.ACTUAL_TEMPERATURE set to 18
2019-10-04 23:46:54.466 - debug: heatingcontrol.0 check room 2OG_Buero1
2019-10-04 23:46:54.466 - debug: heatingcontrol.0 number of periods 3
2019-10-04 23:46:54.466 - debug: heatingcontrol.0 check ID Profiles.0.2OG_Buero1.Mo-Su.Periods.0.time
2019-10-04 23:46:54.466 - debug: heatingcontrol.0 check time for 2OG_Buero1 Profiles.0.2OG_Buero1.Mo-Su.Periods.0.time 19
2019-10-04 23:46:54.466 - debug: heatingcontrol.0 check ID Profiles.0.2OG_Buero1.Mo-Su.Periods.1.time
2019-10-04 23:46:54.481 - debug: heatingcontrol.0 check time for 2OG_Buero1 Profiles.0.2OG_Buero1.Mo-Su.Periods.1.time 22.0
2019-10-04 23:46:54.481 - debug: heatingcontrol.0 check ID Profiles.0.2OG_Buero1.Mo-Su.Periods.2.time
2019-10-04 23:46:54.481 - debug: heatingcontrol.0 check time for 2OG_Buero1 Profiles.0.2OG_Buero1.Mo-Su.Periods.2.time 19.0
2019-10-04 23:46:54.481 - debug: heatingcontrol.0 ### 19.0 0 0 0 0 0
2019-10-04 23:46:54.481 - info: heatingcontrol.0 room 2OG_Buero1 Thermostat 2OG_Buero1_Heizung_11_Kanal4.SET_TEMPERATURE set to 19
2019-10-04 23:46:54.497 - debug: heatingcontrol.0 check room 2OG_Buero2
2019-10-04 23:46:54.497 - debug: heatingcontrol.0 number of periods 3
2019-10-04 23:46:54.497 - debug: heatingcontrol.0 check ID Profiles.0.2OG_Buero2.Mo-Su.Periods.0.time
2019-10-04 23:46:54.497 - debug: heatingcontrol.0 check time for 2OG_Buero2 Profiles.0.2OG_Buero2.Mo-Su.Periods.0.time 18.0
2019-10-04 23:46:54.497 - debug: heatingcontrol.0 check ID Profiles.0.2OG_Buero2.Mo-Su.Periods.1.time
2019-10-04 23:46:54.497 - debug: heatingcontrol.0 check time for 2OG_Buero2 Profiles.0.2OG_Buero2.Mo-Su.Periods.1.time 19.0
2019-10-04 23:46:54.497 - debug: heatingcontrol.0 check ID Profiles.0.2OG_Buero2.Mo-Su.Periods.2.time
2019-10-04 23:46:54.513 - debug: heatingcontrol.0 check time for 2OG_Buero2 Profiles.0.2OG_Buero2.Mo-Su.Periods.2.time 18.0
2019-10-04 23:46:54.513 - debug: heatingcontrol.0 ### 18.0 0 0 0 0 0
2019-10-04 23:46:54.513 - info: heatingcontrol.0 room 2OG_Buero2 Thermostat 2OG_Buero2_Heizung_11_Kanal4.SET_TEMPERATURE set to 18
2019-10-04 23:46:54.513 - debug: heatingcontrol.0 check room 2OG_Bad
2019-10-04 23:46:54.513 - debug: heatingcontrol.0 number of periods 3
2019-10-04 23:46:54.513 - debug: heatingcontrol.0 check ID Profiles.0.2OG_Bad.Mo-Su.Periods.0.time
2019-10-04 23:46:54.513 - debug: heatingcontrol.0 check time for 2OG_Bad Profiles.0.2OG_Bad.Mo-Su.Periods.0.time 18.0
2019-10-04 23:46:54.513 - debug: heatingcontrol.0 check ID Profiles.0.2OG_Bad.Mo-Su.Periods.1.time
2019-10-04 23:46:54.528 - debug: heatingcontrol.0 check time for 2OG_Bad Profiles.0.2OG_Bad.Mo-Su.Periods.1.time 22.0
2019-10-04 23:46:54.528 - debug: heatingcontrol.0 check ID Profiles.0.2OG_Bad.Mo-Su.Periods.2.time
2019-10-04 23:46:54.528 - debug: heatingcontrol.0 check time for 2OG_Bad Profiles.0.2OG_Bad.Mo-Su.Periods.2.time 18.0
2019-10-04 23:46:54.528 - debug: heatingcontrol.0 ### 18.0 0 0 0 0 0
2019-10-04 23:46:54.528 - info: heatingcontrol.0 room 2OG_Bad Thermostat 2OG_Bad_Heizung_11_Kanal4.SET_TEMPERATURE set to 18
2019-10-04 23:46:54.528 - debug: heatingcontrol.0 cron jobs
2019-10-04 23:46:54.528 - debug: heatingcontrol.0 [INFO] status = true next event: 5 Oct 2019 00:00:00
2019-10-04 23:46:54.528 - debug: heatingcontrol.0 [INFO] status = true next event: 5 Oct 2019 06:00:00
2019-10-04 23:46:54.528 - debug: heatingcontrol.0 [INFO] status = true next event: 5 Oct 2019 23:00:00
2019-10-04 23:46:55.886 - error: hm-rpc.0 xmlrpc -> setValue ["4","SET_TEMPERATURE",18] FLOAT
2019-10-04 23:46:55.886 - error: hm-rpc.0 Error: XML-RPC fault: Failure
2019-10-04 23:46:56.104 - debug: heatingcontrol.0 system.adapter.admin.0: logging false
2019-10-04 23:46:56.635 - error: hm-rpc.0 xmlrpc -> setValue ["4","SET_TEMPERATURE",18] FLOAT
2019-10-04 23:46:56.635 - error: hm-rpc.0 Error: XML-RPC fault: Failure
2019-10-04 23:46:57.368 - error: hm-rpc.0 xmlrpc -> setValue ["4","SET_TEMPERATURE",18] FLOAT
2019-10-04 23:46:57.368 - error: hm-rpc.0 Error: XML-RPC fault: Failure
2019-10-04 23:46:58.054 - debug: heatingcontrol.0 system.adapter.admin.0: logging true
2019-10-04 23:46:58.148 - error: hm-rpc.0 xmlrpc -> setValue ["4","SET_TEMPERATURE",20] FLOAT
2019-10-04 23:46:58.148 - error: hm-rpc.0 Error: XML-RPC fault: Failure
2019-10-04 23:46:58.897 - error: hm-rpc.0 xmlrpc -> setValue ["4","SET_TEMPERATURE",17] FLOAT
2019-10-04 23:46:58.897 - error: hm-rpc.0 Error: XML-RPC fault: Failure
2019-10-04 23:46:59.646 - error: hm-rpc.0 xmlrpc -> setValue ["4","SET_TEMPERATURE",18] FLOAT
2019-10-04 23:46:59.646 - error: hm-rpc.0 Error: XML-RPC fault: Failure
2019-10-04 23:47:00.395 - error: hm-rpc.0 xmlrpc -> setValue ["4","SET_TEMPERATURE",18] FLOAT
2019-10-04 23:47:00.395 - error: hm-rpc.0 Error: XML-RPC fault: Failure
2019-10-04 23:47:01.143 - error: hm-rpc.0 xmlrpc -> setValue ["4","SET_TEMPERATURE",19] FLOAT
2019-10-04 23:47:01.143 - error: hm-rpc.0 Error: XML-RPC fault: Failure
2019-10-04 23:47:01.923 - error: hm-rpc.0 xmlrpc -> setValue ["4","SET_TEMPERATURE",18] FLOAT
2019-10-04 23:47:01.923 - error: hm-rpc.0 Error: XML-RPC fault: Failure
2019-10-04 23:47:02.719 - error: hm-rpc.0 xmlrpc -> setValue ["4","SET_TEMPERATURE",18] FLOAT
2019-10-04 23:47:02.719 - error: hm-rpc.0 Error: XML-RPC fault: Failure
2019-10-04 23:47:33.622 - debug: heatingcontrol.0 ### handle state change hm-rpc.0.OEQ0496790.1.STATE {"val":false,"ack":true,"ts":1570225653622,"q":0,"from":"system.adapter.hm-rpc.0","user":"system.user.admin","lc":1567698413860}
2019-10-04 23:47:33.622 - debug: heatingcontrol.0 ### 111 not handled
2019-10-04 23:47:33.622 - debug: heatingcontrol.0 handle actors hm-rpc.0.OEQ0496790.1.STATE{"val":false,"ack":true,"ts":1570225653622,"q":0,"from":"system.adapter.hm-rpc.0","user":"system.user.admin","lc":1567698413860}
2019-10-04 23:47:33.622 - debug: heatingcontrol.0 ### {"id":19,"name":"2OG_Schlafzimmer_Fenster_11_Kanal1.STATE","OID_Current":"hm-rpc.0.OEQ0496790.1.STATE","isActive":true,"type":3,"room":"2OG_Schlafzimmer"}
2019-10-04 23:47:33.622 - debug: heatingcontrol.0 set 2OG_Schlafzimmer window open to {"val":false,"ack":true,"ts":1570225653622,"q":0,"from":"system.adapter.hm-rpc.0","user":"system.user.admin","lc":1567698413860}
2019-10-04 23:47:33.622 - info: heatingcontrol.0 calculating new target temperatures

Falls du noch mehr Daten benötigst, suche ich die gerne zusammen.
Vielen Dank für die Unterstützung

[maarten]

@xADDRx

Ich habe es ziemlich simpel gehalten mit meiner vis, für mich passt es so aber wahrscheinlich gibt es elegantere Lösungen:

Die Einstellungen sind jeweils pro Raum, das Widget bleibt das gleiche.

Spoiler

[{"tpl":"tplImage","data":{"g_fixed":false,"g_visibility":false,"g_css_font_text":false,"g_css_background":false,"g_css_shadow_padding":false,"g_css_border":true,"g_gestures":false,"g_signals":false,"g_last_change":false,"visibility-cond":"==","visibility-val":1,"visibility-groups-action":"hide","refreshInterval":"0","lc-type":"last-change","lc-is-interval":true,"lc-is-moment":false,"lc-format":"","lc-position-vert":"top","lc-position-horz":"right","lc-offset-vert":0,"lc-offset-horz":0,"lc-font-size":"12px","lc-font-family":"","lc-font-style":"","lc-bkg-color":"","lc-color":"","lc-border-width":"0","lc-border-style":"","lc-border-color":"","lc-border-radius":10,"lc-zindex":0,"src":"/icons-mfd-png/temp_temperature.png","stretch":false,"signals-cond-0":"==","signals-val-0":true,"signals-icon-0":"/vis/signals/lowbattery.png","signals-icon-size-0":0,"signals-blink-0":false,"signals-horz-0":0,"signals-vert-0":0,"signals-hide-edit-0":false,"signals-cond-1":"==","signals-val-1":true,"signals-icon-1":"/vis/signals/lowbattery.png","signals-icon-size-1":0,"signals-blink-1":false,"signals-horz-1":0,"signals-vert-1":0,"signals-hide-edit-1":false,"signals-cond-2":"==","signals-val-2":true,"signals-icon-2":"/vis/signals/lowbattery.png","signals-icon-size-2":0,"signals-blink-2":false,"signals-horz-2":0,"signals-vert-2":0,"signals-hide-edit-2":false},"style":{"left":"210px","top":"92px","width":"35px","height":"35px","border-style":"none","z-index":"2","position":""},"widgetSet":"basic"},{"tpl":"tplImage","data":{"g_fixed":false,"g_visibility":false,"g_css_font_text":false,"g_css_background":false,"g_css_shadow_padding":false,"g_css_border":true,"g_gestures":false,"g_signals":false,"g_last_change":false,"visibility-cond":"==","visibility-val":1,"visibility-groups-action":"hide","refreshInterval":"0","lc-type":"last-change","lc-is-interval":true,"lc-is-moment":false,"lc-format":"","lc-position-vert":"top","lc-position-horz":"right","lc-offset-vert":0,"lc-offset-horz":0,"lc-font-size":"12px","lc-font-family":"","lc-font-style":"","lc-bkg-color":"","lc-color":"","lc-border-width":"0","lc-border-style":"","lc-border-color":"","lc-border-radius":10,"lc-zindex":0,"src":"/icons-mfd-png/weather_humidity.png","stretch":false,"signals-cond-0":"==","signals-val-0":true,"signals-icon-0":"/vis/signals/lowbattery.png","signals-icon-size-0":0,"signals-blink-0":false,"signals-horz-0":0,"signals-vert-0":0,"signals-hide-edit-0":false,"signals-cond-1":"==","signals-val-1":true,"signals-icon-1":"/vis/signals/lowbattery.png","signals-icon-size-1":0,"signals-blink-1":false,"signals-horz-1":0,"signals-vert-1":0,"signals-hide-edit-1":false,"signals-cond-2":"==","signals-val-2":true,"signals-icon-2":"/vis/signals/lowbattery.png","signals-icon-size-2":0,"signals-blink-2":false,"signals-horz-2":0,"signals-vert-2":0,"signals-hide-edit-2":false},"style":{"left":"216px","top":"122px","width":"31px","height":"36px","border-style":"none","z-index":"2"},"widgetSet":"basic"},{"tpl":"tplHtml","data":{"g_fixed":false,"g_visibility":false,"g_css_font_text":false,"g_css_background":true,"g_css_shadow_padding":false,"g_css_border":false,"g_gestures":false,"g_signals":false,"g_last_change":false,"visibility-cond":"==","visibility-val":1,"visibility-groups-action":"hide","refreshInterval":"0","signals-cond-0":"==","signals-val-0":true,"signals-icon-0":"/vis/signals/lowbattery.png","signals-icon-size-0":0,"signals-blink-0":false,"signals-horz-0":0,"signals-vert-0":0,"signals-hide-edit-0":false,"signals-cond-1":"==","signals-val-1":true,"signals-icon-1":"/vis/signals/lowbattery.png","signals-icon-size-1":0,"signals-blink-1":false,"signals-horz-1":0,"signals-vert-1":0,"signals-hide-edit-1":false,"signals-cond-2":"==","signals-val-2":true,"signals-icon-2":"/vis/signals/lowbattery.png","signals-icon-size-2":0,"signals-blink-2":false,"signals-horz-2":0,"signals-vert-2":0,"signals-hide-edit-2":false,"lc-type":"last-change","lc-is-interval":true,"lc-is-moment":false,"lc-format":"","lc-position-vert":"top","lc-position-horz":"right","lc-offset-vert":0,"lc-offset-horz":0,"lc-font-size":"12px","lc-font-family":"","lc-font-style":"","lc-bkg-color":"","lc-color":"","lc-border-width":"0","lc-border-style":"","lc-border-color":"","lc-border-radius":10,"lc-zindex":0},"style":{"left":"87px","top":"155px","width":"630px","height":"1px","z-index":"3","background-color":"#FFFFFF"},"widgetSet":"basic"},{"tpl":"tplValueFloat","data":{"oid":"hm-rpc.1.000E570999A397.1.ACTUAL_TEMPERATURE","g_fixed":false,"g_visibility":false,"g_css_font_text":true,"g_css_background":false,"g_css_shadow_padding":false,"g_css_border":false,"g_gestures":false,"g_signals":false,"g_last_change":false,"visibility-cond":"==","visibility-val":1,"visibility-groups-action":"hide","is_comma":"true","factor":"1","signals-cond-0":"==","signals-val-0":true,"signals-icon-0":"/vis/signals/lowbattery.png","signals-icon-size-0":0,"signals-blink-0":false,"signals-horz-0":0,"signals-vert-0":0,"signals-hide-edit-0":false,"signals-cond-1":"==","signals-val-1":true,"signals-icon-1":"/vis/signals/lowbattery.png","signals-icon-size-1":0,"signals-blink-1":false,"signals-horz-1":0,"signals-vert-1":0,"signals-hide-edit-1":false,"signals-cond-2":"==","signals-val-2":true,"signals-icon-2":"/vis/signals/lowbattery.png","signals-icon-size-2":0,"signals-blink-2":false,"signals-horz-2":0,"signals-vert-2":0,"signals-hide-edit-2":false,"lc-type":"last-change","lc-is-interval":true,"lc-is-moment":false,"lc-format":"","lc-position-vert":"top","lc-position-horz":"right","lc-offset-vert":0,"lc-offset-horz":0,"lc-font-size":"12px","lc-font-family":"","lc-font-style":"","lc-bkg-color":"","lc-color":"","lc-border-width":"0","lc-border-style":"","lc-border-color":"","lc-border-radius":10,"lc-zindex":0,"html_append_plural":" °C"},"style":{"left":"245px","top":"105px","color":"#FFFFFF","width":"68px","height":"18px","z-index":"3"},"widgetSet":"basic"},{"tpl":"tplValueFloat","data":{"oid":"hm-rpc.1.000E570999A397.1.HUMIDITY","g_fixed":false,"g_visibility":false,"g_css_font_text":true,"g_css_background":false,"g_css_shadow_padding":false,"g_css_border":false,"g_gestures":false,"g_signals":false,"g_last_change":false,"visibility-cond":"==","visibility-val":1,"visibility-groups-action":"hide","is_comma":"true","factor":"1","signals-cond-0":"==","signals-val-0":true,"signals-icon-0":"/vis/signals/lowbattery.png","signals-icon-size-0":0,"signals-blink-0":false,"signals-horz-0":0,"signals-vert-0":0,"signals-hide-edit-0":false,"signals-cond-1":"==","signals-val-1":true,"signals-icon-1":"/vis/signals/lowbattery.png","signals-icon-size-1":0,"signals-blink-1":false,"signals-horz-1":0,"signals-vert-1":0,"signals-hide-edit-1":false,"signals-cond-2":"==","signals-val-2":true,"signals-icon-2":"/vis/signals/lowbattery.png","signals-icon-size-2":0,"signals-blink-2":false,"signals-horz-2":0,"signals-vert-2":0,"signals-hide-edit-2":false,"lc-type":"last-change","lc-is-interval":true,"lc-is-moment":false,"lc-format":"","lc-position-vert":"top","lc-position-horz":"right","lc-offset-vert":0,"lc-offset-horz":0,"lc-font-size":"12px","lc-font-family":"","lc-font-style":"","lc-bkg-color":"","lc-color":"","lc-border-width":"0","lc-border-style":"","lc-border-color":"","lc-border-radius":10,"lc-zindex":0,"html_append_plural":" %"},"style":{"left":"244px","top":"130px","color":"#FFFFFF","width":"68px","height":"18px","z-index":"3"},"widgetSet":"basic"},{"tpl":"tplHtml","data":{"g_fixed":false,"g_visibility":false,"g_css_font_text":false,"g_css_background":true,"g_css_shadow_padding":false,"g_css_border":true,"g_gestures":false,"g_signals":false,"g_last_change":false,"refreshInterval":"0","signals-cond-0":"==","signals-val-0":true,"signals-icon-0":"/vis/signals/lowbattery.png","signals-icon-size-0":0,"signals-blink-0":false,"signals-horz-0":0,"signals-vert-0":0,"signals-hide-edit-0":false,"signals-cond-1":"==","signals-val-1":true,"signals-icon-1":"/vis/signals/lowbattery.png","signals-icon-size-1":0,"signals-blink-1":false,"signals-horz-1":0,"signals-vert-1":0,"signals-hide-edit-1":false,"signals-cond-2":"==","signals-val-2":true,"signals-icon-2":"/vis/signals/lowbattery.png","signals-icon-size-2":0,"signals-blink-2":false,"signals-horz-2":0,"signals-vert-2":0,"signals-hide-edit-2":false,"lc-type":"last-change","lc-is-interval":true,"lc-is-moment":false,"lc-format":"","lc-position-vert":"top","lc-position-horz":"right","lc-offset-vert":0,"lc-offset-horz":0,"lc-font-size":"12px","lc-font-family":"","lc-font-style":"","lc-bkg-color":"","lc-color":"","lc-border-width":"0","lc-border-style":"","lc-border-color":"","lc-border-radius":10,"lc-zindex":0,"visibility-cond":"==","visibility-val":1,"visibility-groups-action":"hide"},"style":{"left":"80px","top":"95px","width":"644px","height":"123px","border-width":"1px","border-style":"solid","border-color":"#000000","border-radius":"10px","opacity":"","z-index":"1","background-color":"#000000"},"widgetSet":"basic"},{"tpl":"tplHtml","data":{"g_fixed":false,"g_visibility":false,"g_css_font_text":true,"g_css_background":false,"g_css_shadow_padding":false,"g_css_border":false,"g_gestures":false,"g_signals":false,"g_last_change":false,"visibility-cond":"==","visibility-val":1,"visibility-groups-action":"hide","refreshInterval":"0","signals-cond-0":"==","signals-val-0":true,"signals-icon-0":"/vis/signals/lowbattery.png","signals-icon-size-0":0,"signals-blink-0":false,"signals-horz-0":0,"signals-vert-0":0,"signals-hide-edit-0":false,"signals-cond-1":"==","signals-val-1":true,"signals-icon-1":"/vis/signals/lowbattery.png","signals-icon-size-1":0,"signals-blink-1":false,"signals-horz-1":0,"signals-vert-1":0,"signals-hide-edit-1":false,"signals-cond-2":"==","signals-val-2":true,"signals-icon-2":"/vis/signals/lowbattery.png","signals-icon-size-2":0,"signals-blink-2":false,"signals-horz-2":0,"signals-vert-2":0,"signals-hide-edit-2":false,"lc-type":"last-change","lc-is-interval":true,"lc-is-moment":false,"lc-format":"","lc-position-vert":"top","lc-position-horz":"right","lc-offset-vert":0,"lc-offset-horz":0,"lc-font-size":"12px","lc-font-family":"","lc-font-style":"","lc-bkg-color":"","lc-color":"","lc-border-width":"0","lc-border-style":"","lc-border-color":"","lc-border-radius":10,"lc-zindex":0,"html":"Schlafzimmer"},"style":{"left":"90px","top":"105px","width":"146px","height":"20px","color":"#ffffff","z-index":"3"},"widgetSet":"basic"},{"tpl":"tplJquiInputDatetime","data":{"oid":"heatingcontrol.0.Profiles.0.1OG_Schlafzimmer.Mo-Su.Periods.0.time","g_fixed":false,"g_visibility":false,"g_css_font_text":false,"g_css_background":false,"g_css_shadow_padding":false,"g_css_border":false,"g_gestures":false,"g_signals":false,"g_last_change":false,"visibility-cond":"==","visibility-val":1,"visibility-groups-action":"hide","signals-cond-0":"==","signals-val-0":true,"signals-icon-0":"/vis/signals/lowbattery.png","signals-icon-size-0":0,"signals-blink-0":false,"signals-horz-0":0,"signals-vert-0":0,"signals-hide-edit-0":false,"signals-cond-1":"==","signals-val-1":true,"signals-icon-1":"/vis/signals/lowbattery.png","signals-icon-size-1":0,"signals-blink-1":false,"signals-horz-1":0,"signals-vert-1":0,"signals-hide-edit-1":false,"signals-cond-2":"==","signals-val-2":true,"signals-icon-2":"/vis/signals/lowbattery.png","signals-icon-size-2":0,"signals-blink-2":false,"signals-horz-2":0,"signals-vert-2":0,"signals-hide-edit-2":false,"lc-type":"last-change","lc-is-interval":true,"lc-is-moment":false,"lc-format":"","lc-position-vert":"top","lc-position-horz":"right","lc-offset-vert":0,"lc-offset-horz":0,"lc-font-size":"12px","lc-font-family":"","lc-font-style":"","lc-bkg-color":"","lc-color":"","lc-border-width":"0","lc-border-style":"","lc-border-color":"","lc-border-radius":10,"lc-zindex":0,"timeOnly":true,"hideSeconds":true,"size":"1"},"style":{"left":"221px","top":"164px","width":"64px","height":"10px","z-index":"4"},"widgetSet":"jqui"},{"tpl":"tplJquiInput","data":{"oid":"heatingcontrol.0.Profiles.0.1OG_Schlafzimmer.Mo-Su.Periods.0.Temperature","g_fixed":false,"g_visibility":false,"g_css_font_text":true,"g_css_background":false,"g_css_shadow_padding":false,"g_css_border":false,"g_gestures":false,"g_signals":false,"g_last_change":false,"label":"","digits":"1","size":"1","signals-cond-0":"==","signals-val-0":true,"signals-icon-0":"/vis/signals/lowbattery.png","signals-icon-size-0":0,"signals-blink-0":false,"signals-horz-0":0,"signals-vert-0":0,"signals-hide-edit-0":false,"signals-cond-1":"==","signals-val-1":true,"signals-icon-1":"/vis/signals/lowbattery.png","signals-icon-size-1":0,"signals-blink-1":false,"signals-horz-1":0,"signals-vert-1":0,"signals-hide-edit-1":false,"signals-cond-2":"==","signals-val-2":true,"signals-icon-2":"/vis/signals/lowbattery.png","signals-icon-size-2":0,"signals-blink-2":false,"signals-horz-2":0,"signals-vert-2":0,"signals-hide-edit-2":false,"lc-type":"last-change","lc-is-interval":true,"lc-is-moment":false,"lc-format":"","lc-position-vert":"top","lc-position-horz":"right","lc-offset-vert":0,"lc-offset-horz":0,"lc-font-size":"12px","lc-font-family":"","lc-font-style":"","lc-bkg-color":"","lc-color":"","lc-border-width":"0","lc-border-style":"","lc-border-color":"","lc-border-radius":10,"lc-zindex":0,"visibility-cond":"==","visibility-val":1,"visibility-groups-action":"hide"},"style":{"left":"274px","top":"192px","width":"73px","height":"24px","z-index":"4","color":"#ffffff"},"widgetSet":"jqui"},{"tpl":"tplJquiInputDatetime","data":{"oid":"heatingcontrol.0.Profiles.0.1OG_Schlafzimmer.Mo-Su.Periods.1.time","g_fixed":false,"g_visibility":false,"g_css_font_text":false,"g_css_background":false,"g_css_shadow_padding":false,"g_css_border":false,"g_gestures":false,"g_signals":false,"g_last_change":false,"visibility-cond":"==","visibility-val":1,"visibility-groups-action":"hide","signals-cond-0":"==","signals-val-0":true,"signals-icon-0":"/vis/signals/lowbattery.png","signals-icon-size-0":0,"signals-blink-0":false,"signals-horz-0":0,"signals-vert-0":0,"signals-hide-edit-0":false,"signals-cond-1":"==","signals-val-1":true,"signals-icon-1":"/vis/signals/lowbattery.png","signals-icon-size-1":0,"signals-blink-1":false,"signals-horz-1":0,"signals-vert-1":0,"signals-hide-edit-1":false,"signals-cond-2":"==","signals-val-2":true,"signals-icon-2":"/vis/signals/lowbattery.png","signals-icon-size-2":0,"signals-blink-2":false,"signals-horz-2":0,"signals-vert-2":0,"signals-hide-edit-2":false,"lc-type":"last-change","lc-is-interval":true,"lc-is-moment":false,"lc-format":"","lc-position-vert":"top","lc-position-horz":"right","lc-offset-vert":0,"lc-offset-horz":0,"lc-font-size":"12px","lc-font-family":"","lc-font-style":"","lc-bkg-color":"","lc-color":"","lc-border-width":"0","lc-border-style":"","lc-border-color":"","lc-border-radius":10,"lc-zindex":0,"timeOnly":true,"hideSeconds":true,"size":"1"},"style":{"left":"332px","top":"164px","width":"64px","height":"10px","z-index":"4"},"widgetSet":"jqui"},{"tpl":"tplJquiInput","data":{"oid":"heatingcontrol.0.Profiles.0.1OG_Schlafzimmer.Mo-Su.Periods.1.Temperature","g_fixed":false,"g_visibility":false,"g_css_font_text":true,"g_css_background":false,"g_css_shadow_padding":false,"g_css_border":false,"g_gestures":false,"g_signals":false,"g_last_change":false,"label":"","digits":"1","size":"1","signals-cond-0":"==","signals-val-0":true,"signals-icon-0":"/vis/signals/lowbattery.png","signals-icon-size-0":0,"signals-blink-0":false,"signals-horz-0":0,"signals-vert-0":0,"signals-hide-edit-0":false,"signals-cond-1":"==","signals-val-1":true,"signals-icon-1":"/vis/signals/lowbattery.png","signals-icon-size-1":0,"signals-blink-1":false,"signals-horz-1":0,"signals-vert-1":0,"signals-hide-edit-1":false,"signals-cond-2":"==","signals-val-2":true,"signals-icon-2":"/vis/signals/lowbattery.png","signals-icon-size-2":0,"signals-blink-2":false,"signals-horz-2":0,"signals-vert-2":0,"signals-hide-edit-2":false,"lc-type":"last-change","lc-is-interval":true,"lc-is-moment":false,"lc-format":"","lc-position-vert":"top","lc-position-horz":"right","lc-offset-vert":0,"lc-offset-horz":0,"lc-font-size":"12px","lc-font-family":"","lc-font-style":"","lc-bkg-color":"","lc-color":"","lc-border-width":"0","lc-border-style":"","lc-border-color":"","lc-border-radius":10,"lc-zindex":0,"visibility-cond":"==","visibility-val":1,"visibility-groups-action":"hide"},"style":{"left":"390px","top":"192px","width":"73px","height":"24px","z-index":"4","color":"#ffffff"},"widgetSet":"jqui"},{"tpl":"tplJquiInputDatetime","data":{"oid":"heatingcontrol.0.Profiles.0.1OG_Schlafzimmer.Mo-Su.Periods.2.time","g_fixed":false,"g_visibility":false,"g_css_font_text":false,"g_css_background":false,"g_css_shadow_padding":false,"g_css_border":false,"g_gestures":false,"g_signals":false,"g_last_change":false,"visibility-cond":"==","visibility-val":1,"visibility-groups-action":"hide","signals-cond-0":"==","signals-val-0":true,"signals-icon-0":"/vis/signals/lowbattery.png","signals-icon-size-0":0,"signals-blink-0":false,"signals-horz-0":0,"signals-vert-0":0,"signals-hide-edit-0":false,"signals-cond-1":"==","signals-val-1":true,"signals-icon-1":"/vis/signals/lowbattery.png","signals-icon-size-1":0,"signals-blink-1":false,"signals-horz-1":0,"signals-vert-1":0,"signals-hide-edit-1":false,"signals-cond-2":"==","signals-val-2":true,"signals-icon-2":"/vis/signals/lowbattery.png","signals-icon-size-2":0,"signals-blink-2":false,"signals-horz-2":0,"signals-vert-2":0,"signals-hide-edit-2":false,"lc-type":"last-change","lc-is-interval":true,"lc-is-moment":false,"lc-format":"","lc-position-vert":"top","lc-position-horz":"right","lc-offset-vert":0,"lc-offset-horz":0,"lc-font-size":"12px","lc-font-family":"","lc-font-style":"","lc-bkg-color":"","lc-color":"","lc-border-width":"0","lc-border-style":"","lc-border-color":"","lc-border-radius":10,"lc-zindex":0,"timeOnly":true,"hideSeconds":true,"size":"1"},"style":{"left":"450px","top":"164px","width":"64px","height":"10px","z-index":"4"},"widgetSet":"jqui"},{"tpl":"tplJquiInput","data":{"oid":"heatingcontrol.0.Profiles.0.1OG_Schlafzimmer.Mo-Su.Periods.2.Temperature","g_fixed":false,"g_visibility":false,"g_css_font_text":true,"g_css_background":false,"g_css_shadow_padding":false,"g_css_border":false,"g_gestures":false,"g_signals":false,"g_last_change":false,"label":"","digits":"1","size":"1","signals-cond-0":"==","signals-val-0":true,"signals-icon-0":"/vis/signals/lowbattery.png","signals-icon-size-0":0,"signals-blink-0":false,"signals-horz-0":0,"signals-vert-0":0,"signals-hide-edit-0":false,"signals-cond-1":"==","signals-val-1":true,"signals-icon-1":"/vis/signals/lowbattery.png","signals-icon-size-1":0,"signals-blink-1":false,"signals-horz-1":0,"signals-vert-1":0,"signals-hide-edit-1":false,"signals-cond-2":"==","signals-val-2":true,"signals-icon-2":"/vis/signals/lowbattery.png","signals-icon-size-2":0,"signals-blink-2":false,"signals-horz-2":0,"signals-vert-2":0,"signals-hide-edit-2":false,"lc-type":"last-change","lc-is-interval":true,"lc-is-moment":false,"lc-format":"","lc-position-vert":"top","lc-position-horz":"right","lc-offset-vert":0,"lc-offset-horz":0,"lc-font-size":"12px","lc-font-family":"","lc-font-style":"","lc-bkg-color":"","lc-color":"","lc-border-width":"0","lc-border-style":"","lc-border-color":"","lc-border-radius":10,"lc-zindex":0,"visibility-cond":"==","visibility-val":1,"visibility-groups-action":"hide"},"style":{"left":"508px","top":"192px","width":"72px","height":"24px","z-index":"4","color":"#ffffff"},"widgetSet":"jqui"},{"tpl":"tplJquiInputDatetime","data":{"oid":"Datenpunkte.0.EndeHeizperiodeGlobal","g_fixed":false,"g_visibility":false,"g_css_font_text":false,"g_css_background":false,"g_css_shadow_padding":false,"g_css_border":false,"g_gestures":false,"g_signals":false,"g_last_change":false,"visibility-cond":"==","visibility-val":1,"visibility-groups-action":"hide","signals-cond-0":"==","signals-val-0":true,"signals-icon-0":"/vis/signals/lowbattery.png","signals-icon-size-0":0,"signals-blink-0":false,"signals-horz-0":0,"signals-vert-0":0,"signals-hide-edit-0":false,"signals-cond-1":"==","signals-val-1":true,"signals-icon-1":"/vis/signals/lowbattery.png","signals-icon-size-1":0,"signals-blink-1":false,"signals-horz-1":0,"signals-vert-1":0,"signals-hide-edit-1":false,"signals-cond-2":"==","signals-val-2":true,"signals-icon-2":"/vis/signals/lowbattery.png","signals-icon-size-2":0,"signals-blink-2":false,"signals-horz-2":0,"signals-vert-2":0,"signals-hide-edit-2":false,"lc-type":"last-change","lc-is-interval":true,"lc-is-moment":false,"lc-format":"","lc-position-vert":"top","lc-position-horz":"right","lc-offset-vert":0,"lc-offset-horz":0,"lc-font-size":"12px","lc-font-family":"","lc-font-style":"","lc-bkg-color":"","lc-color":"","lc-border-width":"0","lc-border-style":"","lc-border-color":"","lc-border-radius":10,"lc-zindex":0,"timeOnly":true,"hideSeconds":true,"size":"1"},"style":{"left":"568px","top":"164px","width":"64px","height":"10px","z-index":"4"},"widgetSet":"jqui"},{"tpl":"tplHtml","data":{"g_fixed":false,"g_visibility":false,"g_css_font_text":true,"g_css_background":false,"g_css_shadow_padding":false,"g_css_border":false,"g_gestures":false,"g_signals":false,"g_last_change":false,"visibility-cond":"==","visibility-val":1,"visibility-groups-action":"hide","refreshInterval":"0","signals-cond-0":"==","signals-val-0":true,"signals-icon-0":"/vis/signals/lowbattery.png","signals-icon-size-0":0,"signals-blink-0":false,"signals-horz-0":0,"signals-vert-0":0,"signals-hide-edit-0":false,"signals-cond-1":"==","signals-val-1":true,"signals-icon-1":"/vis/signals/lowbattery.png","signals-icon-size-1":0,"signals-blink-1":false,"signals-horz-1":0,"signals-vert-1":0,"signals-hide-edit-1":false,"signals-cond-2":"==","signals-val-2":true,"signals-icon-2":"/vis/signals/lowbattery.png","signals-icon-size-2":0,"signals-blink-2":false,"signals-horz-2":0,"signals-vert-2":0,"signals-hide-edit-2":false,"lc-type":"last-change","lc-is-interval":true,"lc-is-moment":false,"lc-format":"","lc-position-vert":"top","lc-position-horz":"right","lc-offset-vert":0,"lc-offset-horz":0,"lc-font-size":"12px","lc-font-family":"","lc-font-style":"","lc-bkg-color":"","lc-color":"","lc-border-width":"0","lc-border-style":"","lc-border-color":"","lc-border-radius":10,"lc-zindex":0,"html":"°C"},"style":{"left":"327px","top":"197px","width":"22px","height":"20px","color":"#737373","z-index":"10"},"widgetSet":"basic"},{"tpl":"tplHtml","data":{"g_fixed":false,"g_visibility":false,"g_css_font_text":true,"g_css_background":false,"g_css_shadow_padding":false,"g_css_border":false,"g_gestures":false,"g_signals":false,"g_last_change":false,"visibility-cond":"==","visibility-val":1,"visibility-groups-action":"hide","refreshInterval":"0","signals-cond-0":"==","signals-val-0":true,"signals-icon-0":"/vis/signals/lowbattery.png","signals-icon-size-0":0,"signals-blink-0":false,"signals-horz-0":0,"signals-vert-0":0,"signals-hide-edit-0":false,"signals-cond-1":"==","signals-val-1":true,"signals-icon-1":"/vis/signals/lowbattery.png","signals-icon-size-1":0,"signals-blink-1":false,"signals-horz-1":0,"signals-vert-1":0,"signals-hide-edit-1":false,"signals-cond-2":"==","signals-val-2":true,"signals-icon-2":"/vis/signals/lowbattery.png","signals-icon-size-2":0,"signals-blink-2":false,"signals-horz-2":0,"signals-vert-2":0,"signals-hide-edit-2":false,"lc-type":"last-change","lc-is-interval":true,"lc-is-moment":false,"lc-format":"","lc-position-vert":"top","lc-position-horz":"right","lc-offset-vert":0,"lc-offset-horz":0,"lc-font-size":"12px","lc-font-family":"","lc-font-style":"","lc-bkg-color":"","lc-color":"","lc-border-width":"0","lc-border-style":"","lc-border-color":"","lc-border-radius":10,"lc-zindex":0,"html":"°C"},"style":{"left":"443px","top":"197px","width":"22px","height":"20px","color":"#737373","z-index":"10"},"widgetSet":"basic"},{"tpl":"tplHtml","data":{"g_fixed":false,"g_visibility":false,"g_css_font_text":true,"g_css_background":false,"g_css_shadow_padding":false,"g_css_border":false,"g_gestures":false,"g_signals":false,"g_last_change":false,"visibility-cond":"==","visibility-val":1,"visibility-groups-action":"hide","refreshInterval":"0","signals-cond-0":"==","signals-val-0":true,"signals-icon-0":"/vis/signals/lowbattery.png","signals-icon-size-0":0,"signals-blink-0":false,"signals-horz-0":0,"signals-vert-0":0,"signals-hide-edit-0":false,"signals-cond-1":"==","signals-val-1":true,"signals-icon-1":"/vis/signals/lowbattery.png","signals-icon-size-1":0,"signals-blink-1":false,"signals-horz-1":0,"signals-vert-1":0,"signals-hide-edit-1":false,"signals-cond-2":"==","signals-val-2":true,"signals-icon-2":"/vis/signals/lowbattery.png","signals-icon-size-2":0,"signals-blink-2":false,"signals-horz-2":0,"signals-vert-2":0,"signals-hide-edit-2":false,"lc-type":"last-change","lc-is-interval":true,"lc-is-moment":false,"lc-format":"","lc-position-vert":"top","lc-position-horz":"right","lc-offset-vert":0,"lc-offset-horz":0,"lc-font-size":"12px","lc-font-family":"","lc-font-style":"","lc-bkg-color":"","lc-color":"","lc-border-width":"0","lc-border-style":"","lc-border-color":"","lc-border-radius":10,"lc-zindex":0,"html":"°C"},"style":{"left":"561px","top":"197px","width":"22px","height":"20px","color":"#737373","z-index":"10"},"widgetSet":"basic"},{"tpl":"tplHtml","data":{"g_fixed":false,"g_visibility":false,"g_css_font_text":true,"g_css_background":false,"g_css_shadow_padding":false,"g_css_border":false,"g_gestures":false,"g_signals":false,"g_last_change":false,"visibility-cond":"==","visibility-val":1,"visibility-groups-action":"hide","refreshInterval":"0","signals-cond-0":"==","signals-val-0":true,"signals-icon-0":"/vis/signals/lowbattery.png","signals-icon-size-0":0,"signals-blink-0":false,"signals-horz-0":0,"signals-vert-0":0,"signals-hide-edit-0":false,"signals-cond-1":"==","signals-val-1":true,"signals-icon-1":"/vis/signals/lowbattery.png","signals-icon-size-1":0,"signals-blink-1":false,"signals-horz-1":0,"signals-vert-1":0,"signals-hide-edit-1":false,"signals-cond-2":"==","signals-val-2":true,"signals-icon-2":"/vis/signals/lowbattery.png","signals-icon-size-2":0,"signals-blink-2":false,"signals-horz-2":0,"signals-vert-2":0,"signals-hide-edit-2":false,"lc-type":"last-change","lc-is-interval":true,"lc-is-moment":false,"lc-format":"","lc-position-vert":"top","lc-position-horz":"right","lc-offset-vert":0,"lc-offset-horz":0,"lc-font-size":"12px","lc-font-family":"","lc-font-style":"","lc-bkg-color":"","lc-color":"","lc-border-width":"0","lc-border-style":"","lc-border-color":"","lc-border-radius":10,"lc-zindex":0,"html":"bis"},"style":{"left":"301px","top":"167px","width":"22px","height":"20px","color":"#ffffff","z-index":"10"},"widgetSet":"basic"},{"tpl":"tplHtml","data":{"g_fixed":false,"g_visibility":false,"g_css_font_text":true,"g_css_background":false,"g_css_shadow_padding":false,"g_css_border":false,"g_gestures":false,"g_signals":false,"g_last_change":false,"visibility-cond":"==","visibility-val":1,"visibility-groups-action":"hide","refreshInterval":"0","signals-cond-0":"==","signals-val-0":true,"signals-icon-0":"/vis/signals/lowbattery.png","signals-icon-size-0":0,"signals-blink-0":false,"signals-horz-0":0,"signals-vert-0":0,"signals-hide-edit-0":false,"signals-cond-1":"==","signals-val-1":true,"signals-icon-1":"/vis/signals/lowbattery.png","signals-icon-size-1":0,"signals-blink-1":false,"signals-horz-1":0,"signals-vert-1":0,"signals-hide-edit-1":false,"signals-cond-2":"==","signals-val-2":true,"signals-icon-2":"/vis/signals/lowbattery.png","signals-icon-size-2":0,"signals-blink-2":false,"signals-horz-2":0,"signals-vert-2":0,"signals-hide-edit-2":false,"lc-type":"last-change","lc-is-interval":true,"lc-is-moment":false,"lc-format":"","lc-position-vert":"top","lc-position-horz":"right","lc-offset-vert":0,"lc-offset-horz":0,"lc-font-size":"12px","lc-font-family":"","lc-font-style":"","lc-bkg-color":"","lc-color":"","lc-border-width":"0","lc-border-style":"","lc-border-color":"","lc-border-radius":10,"lc-zindex":0,"html":"bis"},"style":{"left":"416px","top":"167px","width":"22px","height":"20px","color":"#ffffff","z-index":"10"},"widgetSet":"basic"},{"tpl":"tplHtml","data":{"g_fixed":false,"g_visibility":false,"g_css_font_text":true,"g_css_background":false,"g_css_shadow_padding":false,"g_css_border":false,"g_gestures":false,"g_signals":false,"g_last_change":false,"visibility-cond":"==","visibility-val":1,"visibility-groups-action":"hide","refreshInterval":"0","signals-cond-0":"==","signals-val-0":true,"signals-icon-0":"/vis/signals/lowbattery.png","signals-icon-size-0":0,"signals-blink-0":false,"signals-horz-0":0,"signals-vert-0":0,"signals-hide-edit-0":false,"signals-cond-1":"==","signals-val-1":true,"signals-icon-1":"/vis/signals/lowbattery.png","signals-icon-size-1":0,"signals-blink-1":false,"signals-horz-1":0,"signals-vert-1":0,"signals-hide-edit-1":false,"signals-cond-2":"==","signals-val-2":true,"signals-icon-2":"/vis/signals/lowbattery.png","signals-icon-size-2":0,"signals-blink-2":false,"signals-horz-2":0,"signals-vert-2":0,"signals-hide-edit-2":false,"lc-type":"last-change","lc-is-interval":true,"lc-is-moment":false,"lc-format":"","lc-position-vert":"top","lc-position-horz":"right","lc-offset-vert":0,"lc-offset-horz":0,"lc-font-size":"12px","lc-font-family":"","lc-font-style":"","lc-bkg-color":"","lc-color":"","lc-border-width":"0","lc-border-style":"","lc-border-color":"","lc-border-radius":10,"lc-zindex":0,"html":"bis"},"style":{"left":"533px","top":"167px","width":"22px","height":"20px","color":"#ffffff","z-index":"10"},"widgetSet":"basic"},{"tpl":"tplHtml","data":{"g_fixed":false,"g_visibility":false,"g_css_font_text":true,"g_css_background":false,"g_css_shadow_padding":false,"g_css_border":false,"g_gestures":false,"g_signals":false,"g_last_change":false,"visibility-cond":"==","visibility-val":1,"visibility-groups-action":"hide","refreshInterval":"0","signals-cond-0":"==","signals-val-0":true,"signals-icon-0":"/vis/signals/lowbattery.png","signals-icon-size-0":0,"signals-blink-0":false,"signals-horz-0":0,"signals-vert-0":0,"signals-hide-edit-0":false,"signals-cond-1":"==","signals-val-1":true,"signals-icon-1":"/vis/signals/lowbattery.png","signals-icon-size-1":0,"signals-blink-1":false,"signals-horz-1":0,"signals-vert-1":0,"signals-hide-edit-1":false,"signals-cond-2":"==","signals-val-2":true,"signals-icon-2":"/vis/signals/lowbattery.png","signals-icon-size-2":0,"signals-blink-2":false,"signals-horz-2":0,"signals-vert-2":0,"signals-hide-edit-2":false,"lc-type":"last-change","lc-is-interval":true,"lc-is-moment":false,"lc-format":"","lc-position-vert":"top","lc-position-horz":"right","lc-offset-vert":0,"lc-offset-horz":0,"lc-font-size":"12px","lc-font-family":"","lc-font-style":"","lc-bkg-color":"","lc-color":"","lc-border-width":"0","lc-border-style":"","lc-border-color":"","lc-border-radius":10,"lc-zindex":0,"html":"von"},"style":{"left":"187px","top":"167px","width":"29px","height":"20px","color":"#ffffff","z-index":"10"},"widgetSet":"basic"},{"tpl":"tplHtml","data":{"g_fixed":false,"g_visibility":false,"g_css_font_text":true,"g_css_background":false,"g_css_shadow_padding":false,"g_css_border":false,"g_gestures":false,"g_signals":false,"g_last_change":false,"visibility-cond":"==","visibility-val":1,"visibility-groups-action":"hide","refreshInterval":"0","signals-cond-0":"==","signals-val-0":true,"signals-icon-0":"/vis/signals/lowbattery.png","signals-icon-size-0":0,"signals-blink-0":false,"signals-horz-0":0,"signals-vert-0":0,"signals-hide-edit-0":false,"signals-cond-1":"==","signals-val-1":true,"signals-icon-1":"/vis/signals/lowbattery.png","signals-icon-size-1":0,"signals-blink-1":false,"signals-horz-1":0,"signals-vert-1":0,"signals-hide-edit-1":false,"signals-cond-2":"==","signals-val-2":true,"signals-icon-2":"/vis/signals/lowbattery.png","signals-icon-size-2":0,"signals-blink-2":false,"signals-horz-2":0,"signals-vert-2":0,"signals-hide-edit-2":false,"lc-type":"last-change","lc-is-interval":true,"lc-is-moment":false,"lc-format":"","lc-position-vert":"top","lc-position-horz":"right","lc-offset-vert":0,"lc-offset-horz":0,"lc-font-size":"12px","lc-font-family":"","lc-font-style":"","lc-bkg-color":"","lc-color":"","lc-border-width":"0","lc-border-style":"","lc-border-color":"","lc-border-radius":10,"lc-zindex":0,"html":"Temperaturabsenkung bei Abwesenheit"},"style":{"left":"424px","top":"102px","width":"289px","height":"20px","color":"#ffffff","z-index":"3"},"widgetSet":"basic"},{"tpl":"tplJquiInput","data":{"oid":"heatingcontrol.0.Profiles.0.1OG_Schlafzimmer.AbsentDecrease","g_fixed":false,"g_visibility":false,"g_css_font_text":true,"g_css_background":false,"g_css_shadow_padding":false,"g_css_border":false,"g_gestures":false,"g_signals":false,"g_last_change":false,"label":"","digits":"1","size":"1","signals-cond-0":"==","signals-val-0":true,"signals-icon-0":"/vis/signals/lowbattery.png","signals-icon-size-0":0,"signals-blink-0":false,"signals-horz-0":0,"signals-vert-0":0,"signals-hide-edit-0":false,"signals-cond-1":"==","signals-val-1":true,"signals-icon-1":"/vis/signals/lowbattery.png","signals-icon-size-1":0,"signals-blink-1":false,"signals-horz-1":0,"signals-vert-1":0,"signals-hide-edit-1":false,"signals-cond-2":"==","signals-val-2":true,"signals-icon-2":"/vis/signals/lowbattery.png","signals-icon-size-2":0,"signals-blink-2":false,"signals-horz-2":0,"signals-vert-2":0,"signals-hide-edit-2":false,"lc-type":"last-change","lc-is-interval":true,"lc-is-moment":false,"lc-format":"","lc-position-vert":"top","lc-position-horz":"right","lc-offset-vert":0,"lc-offset-horz":0,"lc-font-size":"12px","lc-font-family":"","lc-font-style":"","lc-bkg-color":"","lc-color":"","lc-border-width":"0","lc-border-style":"","lc-border-color":"","lc-border-radius":10,"lc-zindex":0,"visibility-cond":"==","visibility-val":1,"visibility-groups-action":"hide"},"style":{"left":"343px","top":"100px","width":"73px","height":"24px","z-index":"4","color":"#ffffff"},"widgetSet":"jqui"},{"tpl":"tplHtml","data":{"g_fixed":false,"g_visibility":false,"g_css_font_text":true,"g_css_background":false,"g_css_shadow_padding":false,"g_css_border":false,"g_gestures":false,"g_signals":false,"g_last_change":false,"visibility-cond":"==","visibility-val":1,"visibility-groups-action":"hide","refreshInterval":"0","signals-cond-0":"==","signals-val-0":true,"signals-icon-0":"/vis/signals/lowbattery.png","signals-icon-size-0":0,"signals-blink-0":false,"signals-horz-0":0,"signals-vert-0":0,"signals-hide-edit-0":false,"signals-cond-1":"==","signals-val-1":true,"signals-icon-1":"/vis/signals/lowbattery.png","signals-icon-size-1":0,"signals-blink-1":false,"signals-horz-1":0,"signals-vert-1":0,"signals-hide-edit-1":false,"signals-cond-2":"==","signals-val-2":true,"signals-icon-2":"/vis/signals/lowbattery.png","signals-icon-size-2":0,"signals-blink-2":false,"signals-horz-2":0,"signals-vert-2":0,"signals-hide-edit-2":false,"lc-type":"last-change","lc-is-interval":true,"lc-is-moment":false,"lc-format":"","lc-position-vert":"top","lc-position-horz":"right","lc-offset-vert":0,"lc-offset-horz":0,"lc-font-size":"12px","lc-font-family":"","lc-font-style":"","lc-bkg-color":"","lc-color":"","lc-border-width":"0","lc-border-style":"","lc-border-color":"","lc-border-radius":10,"lc-zindex":0,"html":"°C"},"style":{"left":"395px","top":"105px","width":"22px","height":"20px","color":"#737373","z-index":"10"},"widgetSet":"basic"},{"tpl":"tplValueString","data":{"oid":"heatingcontrol.0.Profiles.0.1OG_Schlafzimmer.CurrentTimePeriod","g_fixed":false,"g_visibility":false,"g_css_font_text":true,"g_css_background":false,"g_css_shadow_padding":false,"g_css_border":false,"g_gestures":false,"g_signals":false,"g_last_change":false,"visibility-cond":"==","visibility-val":1,"visibility-groups-action":"hide","signals-cond-0":"==","signals-val-0":true,"signals-icon-0":"/vis/signals/lowbattery.png","signals-icon-size-0":0,"signals-blink-0":false,"signals-horz-0":0,"signals-vert-0":0,"signals-hide-edit-0":false,"signals-cond-1":"==","signals-val-1":true,"signals-icon-1":"/vis/signals/lowbattery.png","signals-icon-size-1":0,"signals-blink-1":false,"signals-horz-1":0,"signals-vert-1":0,"signals-hide-edit-1":false,"signals-cond-2":"==","signals-val-2":true,"signals-icon-2":"/vis/signals/lowbattery.png","signals-icon-size-2":0,"signals-blink-2":false,"signals-horz-2":0,"signals-vert-2":0,"signals-hide-edit-2":false,"lc-type":"last-change","lc-is-interval":true,"lc-is-moment":false,"lc-format":"","lc-position-vert":"top","lc-position-horz":"right","lc-offset-vert":0,"lc-offset-horz":0,"lc-font-size":"12px","lc-font-family":"","lc-font-style":"","lc-bkg-color":"","lc-color":"","lc-border-width":"0","lc-border-style":"","lc-border-color":"","lc-border-radius":10,"lc-zindex":0},"style":{"left":"90px","top":"129px","color":"#ffffff","width":"118px","height":"20px","z-index":"4"},"widgetSet":"basic"},{"tpl":"tplHtml","data":{"g_fixed":false,"g_visibility":false,"g_css_font_text":true,"g_css_background":false,"g_css_shadow_padding":false,"g_css_border":false,"g_gestures":false,"g_signals":false,"g_last_change":false,"visibility-cond":"==","visibility-val":1,"visibility-groups-action":"hide","refreshInterval":"0","signals-cond-0":"==","signals-val-0":true,"signals-icon-0":"/vis/signals/lowbattery.png","signals-icon-size-0":0,"signals-blink-0":false,"signals-horz-0":0,"signals-vert-0":0,"signals-hide-edit-0":false,"signals-cond-1":"==","signals-val-1":true,"signals-icon-1":"/vis/signals/lowbattery.png","signals-icon-size-1":0,"signals-blink-1":false,"signals-horz-1":0,"signals-vert-1":0,"signals-hide-edit-1":false,"signals-cond-2":"==","signals-val-2":true,"signals-icon-2":"/vis/signals/lowbattery.png","signals-icon-size-2":0,"signals-blink-2":false,"signals-horz-2":0,"signals-vert-2":0,"signals-hide-edit-2":false,"lc-type":"last-change","lc-is-interval":true,"lc-is-moment":false,"lc-format":"","lc-position-vert":"top","lc-position-horz":"right","lc-offset-vert":0,"lc-offset-horz":0,"lc-font-size":"12px","lc-font-family":"","lc-font-style":"","lc-bkg-color":"","lc-color":"","lc-border-width":"0","lc-border-style":"","lc-border-color":"","lc-border-radius":10,"lc-zindex":0,"html":"Temperaturabsenkung bei Fenster offen"},"style":{"left":"424px","top":"130px","width":"289px","height":"20px","color":"#ffffff","z-index":"3"},"widgetSet":"basic"},{"tpl":"tplJquiInput","data":{"oid":"heatingcontrol.0.Profiles.0.1OG_Schlafzimmer.WindowOpenDecrease","g_fixed":false,"g_visibility":false,"g_css_font_text":true,"g_css_background":false,"g_css_shadow_padding":false,"g_css_border":false,"g_gestures":false,"g_signals":false,"g_last_change":false,"label":"","digits":"1","size":"1","signals-cond-0":"==","signals-val-0":true,"signals-icon-0":"/vis/signals/lowbattery.png","signals-icon-size-0":0,"signals-blink-0":false,"signals-horz-0":0,"signals-vert-0":0,"signals-hide-edit-0":false,"signals-cond-1":"==","signals-val-1":true,"signals-icon-1":"/vis/signals/lowbattery.png","signals-icon-size-1":0,"signals-blink-1":false,"signals-horz-1":0,"signals-vert-1":0,"signals-hide-edit-1":false,"signals-cond-2":"==","signals-val-2":true,"signals-icon-2":"/vis/signals/lowbattery.png","signals-icon-size-2":0,"signals-blink-2":false,"signals-horz-2":0,"signals-vert-2":0,"signals-hide-edit-2":false,"lc-type":"last-change","lc-is-interval":true,"lc-is-moment":false,"lc-format":"","lc-position-vert":"top","lc-position-horz":"right","lc-offset-vert":0,"lc-offset-horz":0,"lc-font-size":"12px","lc-font-family":"","lc-font-style":"","lc-bkg-color":"","lc-color":"","lc-border-width":"0","lc-border-style":"","lc-border-color":"","lc-border-radius":10,"lc-zindex":0,"visibility-cond":"==","visibility-val":1,"visibility-groups-action":"hide"},"style":{"left":"343px","top":"128px","width":"73px","height":"24px","z-index":"4","color":"#ffffff"},"widgetSet":"jqui"},{"tpl":"tplHtml","data":{"g_fixed":false,"g_visibility":false,"g_css_font_text":true,"g_css_background":false,"g_css_shadow_padding":false,"g_css_border":false,"g_gestures":false,"g_signals":false,"g_last_change":false,"visibility-cond":"==","visibility-val":1,"visibility-groups-action":"hide","refreshInterval":"0","signals-cond-0":"==","signals-val-0":true,"signals-icon-0":"/vis/signals/lowbattery.png","signals-icon-size-0":0,"signals-blink-0":false,"signals-horz-0":0,"signals-vert-0":0,"signals-hide-edit-0":false,"signals-cond-1":"==","signals-val-1":true,"signals-icon-1":"/vis/signals/lowbattery.png","signals-icon-size-1":0,"signals-blink-1":false,"signals-horz-1":0,"signals-vert-1":0,"signals-hide-edit-1":false,"signals-cond-2":"==","signals-val-2":true,"signals-icon-2":"/vis/signals/lowbattery.png","signals-icon-size-2":0,"signals-blink-2":false,"signals-horz-2":0,"signals-vert-2":0,"signals-hide-edit-2":false,"lc-type":"last-change","lc-is-interval":true,"lc-is-moment":false,"lc-format":"","lc-position-vert":"top","lc-position-horz":"right","lc-offset-vert":0,"lc-offset-horz":0,"lc-font-size":"12px","lc-font-family":"","lc-font-style":"","lc-bkg-color":"","lc-color":"","lc-border-width":"0","lc-border-style":"","lc-border-color":"","lc-border-radius":10,"lc-zindex":0,"html":"°C"},"style":{"left":"395px","top":"133px","width":"22px","height":"20px","color":"#737373","z-index":"10"},"widgetSet":"basic"},{"tpl":"tplHtml","data":{"g_fixed":false,"g_visibility":false,"g_css_font_text":true,"g_css_background":false,"g_css_shadow_padding":false,"g_css_border":false,"g_gestures":false,"g_signals":false,"g_last_change":false,"visibility-cond":"==","visibility-val":1,"visibility-groups-action":"hide","refreshInterval":"0","signals-cond-0":"==","signals-val-0":true,"signals-icon-0":"/vis/signals/lowbattery.png","signals-icon-size-0":0,"signals-blink-0":false,"signals-horz-0":0,"signals-vert-0":0,"signals-hide-edit-0":false,"signals-cond-1":"==","signals-val-1":true,"signals-icon-1":"/vis/signals/lowbattery.png","signals-icon-size-1":0,"signals-blink-1":false,"signals-horz-1":0,"signals-vert-1":0,"signals-hide-edit-1":false,"signals-cond-2":"==","signals-val-2":true,"signals-icon-2":"/vis/signals/lowbattery.png","signals-icon-size-2":0,"signals-blink-2":false,"signals-horz-2":0,"signals-vert-2":0,"signals-hide-edit-2":false,"lc-type":"last-change","lc-is-interval":true,"lc-is-moment":false,"lc-format":"","lc-position-vert":"top","lc-position-horz":"right","lc-offset-vert":0,"lc-offset-horz":0,"lc-font-size":"12px","lc-font-family":"","lc-font-style":"","lc-bkg-color":"","lc-color":"","lc-border-width":"0","lc-border-style":"","lc-border-color":"","lc-border-radius":10,"lc-zindex":0,"html":"Heizplan"},"style":{"left":"90px","top":"166px","width":"67px","height":"16px","color":"#ffffff","z-index":"3"},"widgetSet":"basic"}]

[hilde0407]

@Chaot Kannst Du mir bitte genau erklären, wie Du die Fritz!Dect Thermostate im Adapter eingetragen hast?

[Chaot]

@hilde0407 Ich habe die im Adapter unter Thermostate eingetragen.
Als Adapter zusätzlich muss FritzDect laufen
Räume und Gewerke waren vom Script vorher schon zugeordnet.
OID aktueller Wert ist dann fritzdect.0.Thermostatkennung.actualtemp
und OID Zielwert ist dann fritzdect.0.Thermostatkennung.actualtemp

[Rene_HM]

@maarten ich habe mir das log angeschaut. Das passt soweit.
Was mich wundert:

• im Raum 1OG_Schlafzimmer hast du kein Thermostat konfiguriert?
• im Raum 2OG_Schlafzimmer finde ich das log
  info: heatingcontrol.0 room 2OG_Schlafzimmer Thermostat hm-rpc.1.000E570999A890.1.ACTUAL_TEMPERATURE set to 18

Actual_Temperature sollte als Ziel-Temp nicht vorkommen

• aber: alle Werte, die du auf die Geräte schreiben möchtest, werden nicht akzeptiert. Deshalb: zeige mir mal die Konfiguration eines Thermostats (speziell den zweiten Teil der OID, das ist in dem oben gezeigten Bild abgeschnitten... Ich denke, die Konfiguration der Datenpunkte passt nicht...

[hilde0407]

@Chaot Vielen Dank! Hat funktioniert!

[nocci]

Hallo an Alle

Ich habe heute ein wenig Zeit gefunden mich mit dem Adapter hier zu beschäftigen.
Den Ansatz finde ich ja richtig super, da man so diverse Hersteller unter eine Decke bringen kann. Dafür schon einmal meinen vollsten Respekt und vielen Dank an den Entwickler.

Im Wohnzimmer verwende ich derzeit noch Max-Thermostaten und einen Max-Fensterkontakt, den ich unter Sensor eingetragen habe und im Schlafzimmer nen HM-IP-Thermostat und einen Max-Fensterkontakt.
Ich habe soweit alles einrichten könnten und hoffentlich auch die richtigen DP genutzt.

Nach dem Start des Adapters sieht mein Log aber sehr voll aus und frage mich, ob das genau so sein soll?

Spoiler

heatingcontrol.0	2019-10-06 13:35:46.014	info	calculating new target temperatures
heatingcontrol.0	2019-10-06 13:35:37.097	info	handle actors Schlafzimmer current 22.4 target 16
heatingcontrol.0	2019-10-06 13:35:37.095	info	handle actors Schlafzimmer current 22.4 target 16
heatingcontrol.0	2019-10-06 13:35:36.393	info	handle actors Wohnzimmer current 23 target 20.5
heatingcontrol.0	2019-10-06 13:35:36.387	info	handle actors Wohnzimmer current 23 target 20.5
heatingcontrol.0	2019-10-06 13:35:36.365	info	handle actors Schlafzimmer current 22.3 target 16
heatingcontrol.0	2019-10-06 13:35:36.278	info	room Schlafzimmer Thermostat Thermostat Schlafzimmer 1.SET_POINT_TEMPERATURE set to 16
heatingcontrol.0	2019-10-06 13:35:36.238	info	handle actors Wohnzimmer current 23 target 20.5
heatingcontrol.0	2019-10-06 13:35:36.216	info	handle actors Wohnzimmer current 23 target 20.5
heatingcontrol.0	2019-10-06 13:35:36.185	info	room Wohnzimmer Thermostat Fenster 1 setpoint set to 20.5
heatingcontrol.0	2019-10-06 13:35:36.168	info	room Wohnzimmer Thermostat Fenster 2 setpoint set to 20.5
heatingcontrol.0	2019-10-06 13:35:36.156	info	handle actors Wohnzimmer current 23 target 20.5
heatingcontrol.0	2019-10-06 13:35:36.149	info	room Wohnzimmer Thermostat Fenster 1 setpoint set to 20.5
heatingcontrol.0	2019-10-06 13:35:36.037	info	calculating new target temperatures
heatingcontrol.0	2019-10-06 13:35:30.309	info	handle actors Schlafzimmer current 22.3 target 16
heatingcontrol.0	2019-10-06 13:35:30.304	info	handle actors Schlafzimmer current 22.3 target 16
heatingcontrol.0	2019-10-06 13:35:27.665	info	handle actors Schlafzimmer current 22.3 target 16
heatingcontrol.0	2019-10-06 13:35:27.660	info	handle actors Schlafzimmer current 22.3 target 16
heatingcontrol.0	2019-10-06 13:35:26.364	info	handle actors Wohnzimmer current 23 target 20.5
heatingcontrol.0	2019-10-06 13:35:26.359	info	handle actors Wohnzimmer current 23 target 20.5
heatingcontrol.0	2019-10-06 13:35:26.340	info	handle actors Schlafzimmer current 22.3 target 16
heatingcontrol.0	2019-10-06 13:35:26.271	info	room Schlafzimmer Thermostat Thermostat Schlafzimmer 1.SET_POINT_TEMPERATURE set to 16
heatingcontrol.0	2019-10-06 13:35:26.218	info	handle actors Wohnzimmer current 23 target 20.5
heatingcontrol.0	2019-10-06 13:35:26.209	info	handle actors Wohnzimmer current 23 target 20.5
heatingcontrol.0	2019-10-06 13:35:26.166	info	room Wohnzimmer Thermostat Fenster 1 setpoint set to 20.5
heatingcontrol.0	2019-10-06 13:35:26.147	info	room Wohnzimmer Thermostat Fenster 2 setpoint set to 20.5
heatingcontrol.0	2019-10-06 13:35:26.133	info	room Wohnzimmer Thermostat Fenster 1 setpoint set to 20.5
heatingcontrol.0	2019-10-06 13:35:26.119	info	handle actors Wohnzimmer current 23 target 20.5
heatingcontrol.0	2019-10-06 13:35:26.018	info	calculating new target temperatures
heatingcontrol.0	2019-10-06 13:35:17.867	info	handle actors Schlafzimmer current 22.3 target 16
heatingcontrol.0	2019-10-06 13:35:17.866	info	handle actors Schlafzimmer current 22.3 target 16
heatingcontrol.0	2019-10-06 13:35:16.424	info	handle actors Wohnzimmer current 23 target 20.5
heatingcontrol.0	2019-10-06 13:35:16.419	info	handle actors Wohnzimmer current 23 target 20.5
heatingcontrol.0	2019-10-06 13:35:16.336	info	handle actors Schlafzimmer current 22.3 target 16
heatingcontrol.0	2019-10-06 13:35:16.271	info	room Schlafzimmer Thermostat Thermostat Schlafzimmer 1.SET_POINT_TEMPERATURE set to 16
heatingcontrol.0	2019-10-06 13:35:16.223	info	handle actors Wohnzimmer current 23 target 20.5
heatingcontrol.0	2019-10-06 13:35:16.201	info	handle actors Wohnzimmer current 23 target 20.5
heatingcontrol.0	2019-10-06 13:35:16.164	info	handle actors Wohnzimmer current 23 target 20.5
heatingcontrol.0	2019-10-06 13:35:16.158	info	room Wohnzimmer Thermostat Fenster 1 setpoint set to 20.5
heatingcontrol.0	2019-10-06 13:35:16.142	info	room Wohnzimmer Thermostat Fenster 2 setpoint set to 20.5
heatingcontrol.0	2019-10-06 13:35:16.130	info	room Wohnzimmer Thermostat Fenster 1 setpoint set to 20.5
heatingcontrol.0	2019-10-06 13:35:16.041	info	calculating new target temperatures
heatingcontrol.0	2019-10-06 13:35:07.021	info	handle actors Schlafzimmer current 22.3 target 16
heatingcontrol.0	2019-10-06 13:35:07.021	info	handle actors Schlafzimmer current 22.3 target 16
heatingcontrol.0	2019-10-06 13:35:06.470	info	handle actors Wohnzimmer current 23 target 20.5
heatingcontrol.0	2019-10-06 13:35:06.459	info	handle actors Wohnzimmer current 23 target 20.5
heatingcontrol.0	2019-10-06 13:35:06.414	info	handle actors Schlafzimmer current 22.3 target 16
heatingcontrol.0	2019-10-06 13:35:06.315	info	room Schlafzimmer Thermostat Thermostat Schlafzimmer 1.SET_POINT_TEMPERATURE set to 16
heatingcontrol.0	2019-10-06 13:35:06.270	info	handle actors Wohnzimmer current 23 target 20.5
heatingcontrol.0	2019-10-06 13:35:06.255	info	handle actors Wohnzimmer current 23 target 20.5
heatingcontrol.0	2019-10-06 13:35:06.230	info	room Wohnzimmer Thermostat Fenster 1 setpoint set to 20.5
heatingcontrol.0	2019-10-06 13:35:06.215	info	room Wohnzimmer Thermostat Fenster 2 setpoint set to 20.5
heatingcontrol.0	2019-10-06 13:35:06.201	info	room Wohnzimmer Thermostat Fenster 1 setpoint set to 20.5
heatingcontrol.0	2019-10-06 13:35:06.187	info	handle actors Wohnzimmer current 23 target 20.5
heatingcontrol.0	2019-10-06 13:35:06.053	info	calculating new target temperatures
heatingcontrol.0	2019-10-06 13:34:57.208	info	handle actors Schlafzimmer current 22.3 target 16
heatingcontrol.0	2019-10-06 13:34:57.205	info	handle actors Schlafzimmer current 22.3 target 16
heatingcontrol.0	2019-10-06 13:34:56.367	info	handle actors Wohnzimmer current 23 target 20.5
heatingcontrol.0	2019-10-06 13:34:56.363	info	handle actors Wohnzimmer current 23 target 20.5
heatingcontrol.0	2019-10-06 13:34:56.338	info	handle actors Schlafzimmer current 22.3 target 16
heatingcontrol.0	2019-10-06 13:34:56.224	info	room Schlafzimmer Thermostat Thermostat Schlafzimmer 1.SET_POINT_TEMPERATURE set to 16
heatingcontrol.0	2019-10-06 13:34:56.182	info	handle actors Wohnzimmer current 23 target 20.5
heatingcontrol.0	2019-10-06 13:34:56.163	info	handle actors Wohnzimmer current 23 target 20.5
heatingcontrol.0	2019-10-06 13:34:56.137	info	room Wohnzimmer Thermostat Fenster 1 setpoint set to 20.5
heatingcontrol.0	2019-10-06 13:34:56.123	info	room Wohnzimmer Thermostat Fenster 2 setpoint set to 20.5
heatingcontrol.0	2019-10-06 13:34:56.113	info	room Wohnzimmer Thermostat Fenster 1 setpoint set to 20.5
heatingcontrol.0	2019-10-06 13:34:56.099	info	handle actors Wohnzimmer current 23 target 20.5
heatingcontrol.0	2019-10-06 13:34:56.012	info	calculating new target temperatures
heatingcontrol.0	2019-10-06 13:34:48.446	info	handle actors Schlafzimmer current 22.3 target 16
heatingcontrol.0	2019-10-06 13:34:48.445	info	handle actors Schlafzimmer current 22.3 target 16
heatingcontrol.0	2019-10-06 13:34:46.416	info	handle actors Wohnzimmer current 23 target 20.5
heatingcontrol.0	2019-10-06 13:34:46.409	info	handle actors Wohnzimmer current 23 target 20.5
heatingcontrol.0	2019-10-06 13:34:46.335	info	handle actors Schlafzimmer current 22.3 target 16
heatingcontrol.0	2019-10-06 13:34:46.249	info	room Schlafzimmer Thermostat Thermostat Schlafzimmer 1.SET_POINT_TEMPERATURE set to 16
heatingcontrol.0	2019-10-06 13:34:46.207	info	handle actors Wohnzimmer current 23 target 20.5
heatingcontrol.0	2019-10-06 13:34:46.179	info	handle actors Wohnzimmer current 23 target 20.5
heatingcontrol.0	2019-10-06 13:34:46.144	info	room Wohnzimmer Thermostat Fenster 1 setpoint set to 20.5
heatingcontrol.0	2019-10-06 13:34:46.117	info	room Wohnzimmer Thermostat Fenster 2 setpoint set to 20.5
heatingcontrol.0	2019-10-06 13:34:46.109	info	handle actors Wohnzimmer current 23 target 20.5
heatingcontrol.0	2019-10-06 13:34:46.105	info	room Wohnzimmer Thermostat Fenster 1 setpoint set to 20.5
heatingcontrol.0	2019-10-06 13:34:46.012	info	calculating new target temperatures
heatingcontrol.0	2019-10-06 13:34:38.658	info	handle actors Schlafzimmer current 22.3 target 16
heatingcontrol.0	2019-10-06 13:34:38.654	info	handle actors Schlafzimmer current 22.3 target 16
heatingcontrol.0	2019-10-06 13:34:36.501	info	handle actors Wohnzimmer current 23 target 20.5
heatingcontrol.0	2019-10-06 13:34:36.494	info	handle actors Wohnzimmer current 23 target 20.5
heatingcontrol.0	2019-10-06 13:34:36.409	info	handle actors Schlafzimmer current 22.3 target 16
heatingcontrol.0	2019-10-06 13:34:36.339	info	room Schlafzimmer Thermostat Thermostat Schlafzimmer 1.SET_POINT_TEMPERATURE set to 16
heatingcontrol.0	2019-10-06 13:34:36.285	info	handle actors Wohnzimmer current 23 target 20.5
heatingcontrol.0	2019-10-06 13:34:36.285	info	handle actors Wohnzimmer current 23 target 20.5
heatingcontrol.0	2019-10-06 13:34:36.284	info	handle actors Wohnzimmer current 23 target 20.5
heatingcontrol.0	2019-10-06 13:34:36.258	info	handle actors Wohnzimmer current 23 target 20.5
heatingcontrol.0	2019-10-06 13:34:36.238	info	room Wohnzimmer Thermostat Fenster 1 setpoint set to 20.5
heatingcontrol.0	2019-10-06 13:34:36.224	info	handle actors Wohnzimmer current 23 target 20.5
heatingcontrol.0	2019-10-06 13:34:36.220	info	room Wohnzimmer Thermostat Fenster 2 setpoint set to 20.5
heatingcontrol.0	2019-10-06 13:34:36.209	info	room Wohnzimmer Thermostat Fenster 1 setpoint set to 20.5
heatingcontrol.0	2019-10-06 13:34:36.106	info	calculating new target temperatures
heatingcontrol.0	2019-10-06 13:34:27.812	info	handle actors Schlafzimmer current 22.3 target 16
heatingcontrol.0	2019-10-06 13:34:27.810	info	handle actors Schlafzimmer current 22.3 target 16
heatingcontrol.0	2019-10-06 13:34:26.400	info	handle actors Wohnzimmer current 23 target 20.5
heatingcontrol.0	2019-10-06 13:34:26.379	info	handle actors Wohnzimmer current 23 target 20.5
heatingcontrol.0	2019-10-06 13:34:26.263	info	handle actors Schlafzimmer current 22.3 target 16
heatingcontrol.0	2019-10-06 13:34:26.235	info	room Schlafzimmer Thermostat Thermostat Schlafzimmer 1.SET_POINT_TEMPERATURE set to 16
heatingcontrol.0	2019-10-06 13:34:26.192	info	handle actors Wohnzimmer current 23 target 20.5
heatingcontrol.0	2019-10-06 13:34:26.185	info	handle actors Wohnzimmer current 23 target 20.5
heatingcontrol.0	2019-10-06 13:34:26.142	info	room Wohnzimmer Thermostat Fenster 1 setpoint set to 20.5
heatingcontrol.0	2019-10-06 13:34:26.126	info	room Wohnzimmer Thermostat Fenster 2 setpoint set to 20.5
heatingcontrol.0	2019-10-06 13:34:26.120	info	handle actors Wohnzimmer current 23 target 20.5
heatingcontrol.0	2019-10-06 13:34:26.116	info	room Wohnzimmer Thermostat Fenster 1 setpoint set to 20.5
heatingcontrol.0	2019-10-06 13:34:26.023	info	calculating new target temperatures
heatingcontrol.0	2019-10-06 13:34:20.111	info	handle actors Schlafzimmer current 22.3 target 16
heatingcontrol.0	2019-10-06 13:34:18.654	info	handle actors Schlafzimmer current 22.3 target 16
heatingcontrol.0	2019-10-06 13:34:18.557	info	room Schlafzimmer Thermostat Thermostat Schlafzimmer 1.SET_POINT_TEMPERATURE set to 16
heatingcontrol.0	2019-10-06 13:34:18.451	info	handle actors Wohnzimmer current 23 target 20.5
heatingcontrol.0	2019-10-06 13:34:18.443	info	handle actors Wohnzimmer current 23 target 20.5
heatingcontrol.0	2019-10-06 13:34:18.436	info	handle actors Wohnzimmer current 23 target 20.5
heatingcontrol.0	2019-10-06 13:34:18.413	info	room Wohnzimmer Thermostat Fenster 1 setpoint set to 20.5
heatingcontrol.0	2019-10-06 13:34:18.400	info	room Wohnzimmer Thermostat Fenster 2 setpoint set to 20.5
heatingcontrol.0	2019-10-06 13:34:18.337	info	room Wohnzimmer Thermostat Fenster 1 setpoint set to 20.5
heatingcontrol.0	2019-10-06 13:34:17.764	info	calculating new target temperatures
heatingcontrol.0	2019-10-06 13:34:17.146	info	subscribe Wohnzimmer maxcube.0.devices.contact_0c1efa.opened
heatingcontrol.0	2019-10-06 13:34:17.146	info	subscribe Wohnzimmer maxcube.0.devices.thermostat_15dda6.setpoint / maxcube.0.devices.thermostat_15cb43.temp
heatingcontrol.0	2019-10-06 13:34:17.145	info	subscribe Wohnzimmer maxcube.0.devices.thermostat_15cb43.setpoint / maxcube.0.devices.thermostat_15cb43.temp
heatingcontrol.0	2019-10-06 13:34:17.144	info	subscribe Wohnzimmer maxcube.0.devices.thermostat_15dda6.setpoint / maxcube.0.devices.thermostat_15cb43.temp
heatingcontrol.0	2019-10-06 13:34:17.141	info	subscribe Schlafzimmer hm-rpc.1.001299939684BF.1.SET_POINT_TEMPERATURE / hm-rpc.1.001299939684BF.1.ACTUAL_TEMPERATURE
heatingcontrol.0	2019-10-06 13:34:16.597	info	starting. Version 0.3.0 in /opt/iobroker/node_modules/iobroker.heatingcontrol, node: v10.16.3
heatingcontrol.0	2019-10-06 13:34:12.805	info	cleaned everything up...
heatingcontrol.0	2019-10-06 13:34:12.796	info	cleaned everything up...
heatingcontrol.0	2019-10-06 13:34:07.189	info	handle actors Schlafzimmer current 22.3 target 16
heatingcontrol.0	2019-10-06 13:34:07.157	info	handle actors Schlafzimmer current 22.3 target 16
heatingcontrol.0	2019-10-06 13:34:06.467	info	handle actors Wohnzimmer current 23 target 20.5
heatingcontrol.0	2019-10-06 13:34:06.461	info	handle actors Wohnzimmer current 23 target 20.5
heatingcontrol.0	2019-10-06 13:34:06.383	info	handle actors Schlafzimmer current 22.3 target 16
heatingcontrol.0	2019-10-06 13:34:06.309	info	room Schlafzimmer Thermostat Thermostat Schlafzimmer 1.SET_POINT_TEMPERATURE set to 16
heatingcontrol.0	2019-10-06 13:34:06.250	info	handle actors Wohnzimmer current 23 target 20.5
heatingcontrol.0	2019-10-06 13:34:06.223	info	handle actors Wohnzimmer current 23 target 20.5
heatingcontrol.0	2019-10-06 13:34:06.205	info	room Wohnzimmer Thermostat Fenster 1 setpoint set to 20.5
heatingcontrol.0	2019-10-06 13:34:06.156	info	handle actors Wohnzimmer current 23 target 20.5
heatingcontrol.0	2019-10-06 13:34:06.151	info	room Wohnzimmer Thermostat Fenster 2 setpoint set to 20.5
heatingcontrol.0	2019-10-06 13:34:06.133	info	room Wohnzimmer Thermostat Fenster 1 setpoint set to 20.5
heatingcontrol.0	2019-10-06 13:34:06.048	info	calculating new target temperatures
heatingcontrol.0	2019-10-06 13:33:58.403	info	handle actors Schlafzimmer current 22.3 target 16
heatingcontrol.0	2019-10-06 13:33:58.401	info	handle actors Schlafzimmer current 22.3 target 16
heatingcontrol.0	2019-10-06 13:33:56.450	info	handle actors Wohnzimmer current 23 target 20.5
heatingcontrol.0	2019-10-06 13:33:56.430	info	handle actors Wohnzimmer current 23 target 20.5
heatingcontrol.0	2019-10-06 13:33:56.347	info	handle actors Schlafzimmer current 22.3 target 16
heatingcontrol.0	2019-10-06 13:33:56.251	info	room Schlafzimmer Thermostat Thermostat Schlafzimmer 1.SET_POINT_TEMPERATURE set to 16
heatingcontrol.0	2019-10-06 13:33:56.214	info	handle actors Wohnzimmer current 23 target 20.5
heatingcontrol.0	2019-10-06 13:33:56.209	info	handle actors Wohnzimmer current 23 target 20.5
heatingcontrol.0	2019-10-06 13:33:56.199	info	handle actors Wohnzimmer current 23 target 20.5
heatingcontrol.0	2019-10-06 13:33:56.190	info	handle actors Wohnzimmer current 23 target 20.5
heatingcontrol.0	2019-10-06 13:33:56.159	info	handle actors Wohnzimmer current 23 target 20.5
heatingcontrol.0	2019-10-06 13:33:56.158	info	room Wohnzimmer Thermostat Fenster 1 setpoint set to 20.5

Wie gesagt, es sieht für mich so aus als wenn das Log gerade zu geflutet wird mit den entsprechenden Einträgen, wie man sie oben sehen kann und frage mich wie es bei anderen Anwendern so aussieht und ob das so richtig ist.

[Rene_HM]

@nocci Hast du das "Use Actuators" an? Wennn du keine Aktoren konfiguriert hast (was du auch nicht brauchst, wenn deine Thermostate die Aktoren direkt schalten), dann schalte das "Use Actuators" aus.
So häufig wie bei dir im log sollte die Zieltemperatur nicht auf das Thermostat geschrieben werden. Entweder melden sich deine Sensoren ständig (und nicht nur bei Änderung) oder du hast eine ungünstige Zeitsteuerung konfiguriert. Kannst du mal den Adapter im debug-Mode laufen lassen und das log posten? Dann sollten wir die Ursache finden...