Test Adapter HeatingControl v2.12.x
-
Wie gehe ich am besten mit überzähligen Perioden um? Also in manchen Zimmern benötige ich nur 2 Schaltzeiten, in anderen vier... Wie kann ich nicht benötigte Periodeneinträge einfach deaktivieren damit ich nicht so viele überflüssige Zeiten einstellen muss?
Edit: Ist es sinnvoller die überzähliugen alle auf die selbe Zeit zu stellen? Oder besser andere Zeiten?
Edit2: Oder werden Schaltzeiten die in der Reihenfolge quasi zu spät kommen einfach übersprungen? Für mich wäre es dann jedenfalls angnehmer, wenn alle Punkte pe default auf 00:00 oder 23:59 liegen würden. -
@Rene_HM
Super! Herzlichen Dank für den schnellen support. Ich habe soeben installiert und es läuft.
Werde jetzt mal alles einrichten und so wie es aussieht werde ich dann das "alte Heizungsscript" in die Rente schicken. Es fehlt jetzt nur noch eine schicke VIS dazu, die alte ist mir zu unübersichtlich und sieht auch nicht so hübsch aus. Ectl. bastele ich dazu mal was und kann damit mal was zurückgeben an die Community.Eine Anmerkung von mir noch. Ich würde es für sinnvoll erachten, wenn man bei der Reaktion auf die Sensoren und die anschließende Absenkung der Temperatur eine variable, also auswählbare, Zeitverzögerung einbauen könnte. Wir haben einen Hund und immer, wenn wir den rauslassen, Balkontür auf und wieder zu, löst natürlich das Script aus und senkt die Temperatur und hebt sie dann sofort wieder an. Diesen "Datentraffic" könnte man sich sparen. Evtl. ist eine Berücksichtigung in der weiteren Entwicklung möglich.
An dieser Stelle nochmals Danke für Deine Arbeit in dieser Sache!!!!
-
@mrMuppet sagte in Test Adapter HeatingControl v0.3.x:
Oder werden Schaltzeiten die in der Reihenfolge quasi zu spät kommen einfach übersprungen?
So ist es. Ich prüfe, die Reihenfolge, und Zeitpunkte aus der "Vergangenheit" werden ignoriert. Du musst aber dann aber mit eine Warnung leben "wrong order of periods: ..."
-
@Rene_HM sagte in Test Adapter HeatingControl v0.3.x:
@mrMuppet sagte in Test Adapter HeatingControl v0.3.x:
Oder werden Schaltzeiten die in der Reihenfolge quasi zu spät kommen einfach übersprungen?
So ist es. Ich prüfe, die Reihenfolge, und Zeitpunkte aus der "Vergangenheit" werden ignoriert. Du musst aber dann aber mit eine Warnung leben "wrong order of periods: ..."
Leider habe ich deine Antwort genau falsch herum verstanden. Ich muss anscheinend alle Perioden einzeln durchgehen, weil er obwohl z.B.:
P1: ab 7:00
P2: ab 20:00
P3 ab 16:00
...jetzt auf P3 steht.
Da wäre es imo ganz praktisch, wenn direkt alle Presets auf 0:00 Uhr stehen würden. Dann schaltet man quasi nur die Perioden aktiv in die man etwas einträgt.
-
@mrMuppet sagte in Test Adapter HeatingControl v0.3.x:
Ich muss anscheinend alle Perioden einzeln durchgehen, weil er obwohl z.B.:
P1: ab 7:00
P2: ab 20:00
P3 ab 16:00
...
jetzt auf P3 hängt.Das sollte so nicht sein. Welchen Profiltype verwendest du? Was sagt das log bzgl. cron?
-
@Rene_HM Sieht alles ganz normal aus. Typ: Mo-Fr/Sa-So. Hab jetzt aber auch alle Werte händisch korrigiert.
Log
heatingcontrol.0 2019-11-01 18:45:00.746 info (27170) room Wohnzimmer Thermostat Thermostat Wohnzimmer 1.SETPOINT set to 20 heatingcontrol.0 2019-11-01 18:45:00.644 info (27170) room Flur Thermostat Thermostat Flur 1.SETPOINT set to 19 heatingcontrol.0 2019-11-01 18:45:00.537 info (27170) room Dachzimmer Thermostat HmIP-eTRV-2 000A18A98E70C1 set to 20 heatingcontrol.0 2019-11-01 18:45:00.435 info (27170) room Bad Thermostat Funk- Wandthermostat Bad 1.SETPOINT set to 21 heatingcontrol.0 2019-11-01 18:45:00.326 info (27170) room Kinderzimmer 2 Thermostat Thermostat K2 1.SETPOINT set to 20 heatingcontrol.0 2019-11-01 18:45:00.223 info (27170) room Kinderzimmer 1 Thermostat Thermostat K1 1.SETPOINT set to 20 heatingcontrol.0 2019-11-01 18:45:00.120 info (27170) room Schlafzimmer Thermostat Thermostat Schlafzimmer 1.SETPOINT set to 19 heatingcontrol.0 2019-11-01 18:45:00.008 info (27170) calculating new target temperatures heatingcontrol.0 2019-11-01 18:07:21.455 info (27170) room Wohnzimmer Thermostat Thermostat Wohnzimmer 1.SETPOINT set to 20 heatingcontrol.0 2019-11-01 18:07:21.452 info (27170) room Flur Thermostat Thermostat Flur 1.SETPOINT set to 19 heatingcontrol.0 2019-11-01 18:07:21.448 info (27170) room Dachzimmer Thermostat HmIP-eTRV-2 000A18A98E70C1 set to 20 heatingcontrol.0 2019-11-01 18:07:21.446 info (27170) room Bad Thermostat Funk- Wandthermostat Bad 1.SETPOINT set to 21 heatingcontrol.0 2019-11-01 18:07:21.444 info (27170) room Kinderzimmer 2 Thermostat Thermostat K2 1.SETPOINT set to 20 heatingcontrol.0 2019-11-01 18:07:21.442 info (27170) room Kinderzimmer 1 Thermostat Thermostat K1 1.SETPOINT set to 20 heatingcontrol.0 2019-11-01 18:07:21.439 info (27170) room Schlafzimmer Thermostat Thermostat Schlafzimmer 1.SETPOINT set to 19 heatingcontrol.0 2019-11-01 18:07:21.325 info (27170) calculating new target temperatures heatingcontrol.0 2019-11-01 18:07:20.988 info (27170) subscribe feiertage.0.heute.boolean heatingcontrol.0 2019-11-01 18:07:19.885 info (27170) starting. Version 0.3.2 in /opt/iobroker/node_modules/iobroker.heatingcontrol, node: v10.16.3 -
@Rene_HM hätte da noch nen kleinen Feature request. Könntest du vllt noch einen State einbauen der bei offenem/geschlossenem Fenster true/false wird? Also sobald die Absenkung greift.
Dürfte ja eigentlich keine große Sache sein. Oder soll ich ein GitHub issue aufmachen? -
@coyote das issue gibt's schon
https://github.com/rg-engineering/ioBroker.heatingcontrol/issues/38 -
@Rene_HM Ups sorry, hab in Git noch nicht geschaut. Alles klar
-
@mrMuppet in dem Mode ist noch ein Fehler drin, den ich gleich in der nächsten Version behebe. Der check auf die richtige Reihenfolge geht hier schief...
-
Hallo @Rene_HM
muss nochmal etwas melden. Wenn ich nachträglich Räume / Geräte im Adapter eintrage, dann legt er unter Objekten nicht die Ordner mit den Zeitperioden an. Erst wenn ich über den Adapter alles lösche und dann alles zusammenanlege, dann funktioniert es. D.h. konkret, nachträgliche Einträge etc. funktionieren nicht. Anbei mein Log, evtl. hilft das.Bin auf Version 0.3.2
undefined2019-11-02 18:37:18.248 - info: host.ioBroker object change system.adapter.heatingcontrol.0 2019-11-02 18:37:18.249 - info: host.ioBroker stopInstance system.adapter.heatingcontrol.0 2019-11-02 18:37:18.249 - info: host.ioBroker stopInstance system.adapter.heatingcontrol.0 killing pid 25274 2019-11-02 18:37:18.251 - info: heatingcontrol.0 cleaned everything up... 2019-11-02 18:37:18.269 - info: heatingcontrol.0 cleaned everything up... 2019-11-02 18:37:18.300 - info: host.ioBroker instance system.adapter.heatingcontrol.0 terminated with code 0 (OK) 2019-11-02 18:37:20.772 - info: host.ioBroker instance system.adapter.heatingcontrol.0 started with pid 5355 2019-11-02 18:37:21.799 - info: heatingcontrol.0 starting. Version 0.3.2 in /opt/iobroker/node_modules/iobroker.heatingcontrol, node: v8.12.0 2019-11-02 18:37:22.354 - info: heatingcontrol.0 start temperature override for room Leer 2019-11-02 18:37:22.361 - info: heatingcontrol.0 subscribe Büro mihome.0.devices.magnet_158d0001c314f5.state 2019-11-02 18:37:22.363 - info: heatingcontrol.0 subscribe Flur EG mihome.0.devices.magnet_158d0001c0a352.state 2019-11-02 18:37:22.363 - info: heatingcontrol.0 subscribe Leer maxcube.0.devices.contact_1665a4.opened 2019-11-02 18:37:22.519 - warn: heatingcontrol.0 override temperature not valid: 0 2019-11-02 18:37:22.772 - error: heatingcontrol.0 exception in CheckValidTime [TypeError: Cannot read property 'val' of null] for Profiles.0.Leer.Mo-Fr.Periods.0.time null 2019-11-02 18:37:22.775 - error: heatingcontrol.0 exception in CheckValidTime [TypeError: Cannot read property 'val' of null] for Profiles.0.Leer.Mo-Fr.Periods.1.time null 2019-11-02 18:37:22.782 - error: heatingcontrol.0 exception in CheckValidTime [TypeError: Cannot read property 'val' of null] for Profiles.0.Leer.Mo-Fr.Periods.2.time null 2019-11-02 18:37:22.789 - error: heatingcontrol.0 exception in CheckValidTime [TypeError: Cannot read property 'val' of null] for Profiles.0.Leer.Mo-Fr.Periods.3.time null 2019-11-02 18:37:22.796 - error: heatingcontrol.0 exception in CheckValidTime [TypeError: Cannot read property 'val' of null] for Profiles.0.Leer.Mo-Fr.Periods.4.time null 2019-11-02 18:37:22.803 - error: heatingcontrol.0 exception in CheckValidTime [TypeError: Cannot read property 'val' of null] for Profiles.0.Leer.Su-So.Periods.0.time null 2019-11-02 18:37:22.810 - error: heatingcontrol.0 exception in CheckValidTime [TypeError: Cannot read property 'val' of null] for Profiles.0.Leer.Su-So.Periods.1.time null 2019-11-02 18:37:22.817 - error: heatingcontrol.0 exception in CheckValidTime [TypeError: Cannot read property 'val' of null] for Profiles.0.Leer.Su-So.Periods.2.time null 2019-11-02 18:37:22.823 - error: heatingcontrol.0 exception in CheckValidTime [TypeError: Cannot read property 'val' of null] for Profiles.0.Leer.Su-So.Periods.3.time null 2019-11-02 18:37:22.832 - error: heatingcontrol.0 exception in CheckValidTime [TypeError: Cannot read property 'val' of null] for Profiles.0.Leer.Su-So.Periods.4.time null 2019-11-02 18:37:23.107 - info: heatingcontrol.0 calculating new target temperatures 2019-11-02 18:37:23.875 - info: heatingcontrol.0 room Büro Thermostat Büro setpoint set to 19 2019-11-02 18:37:23.916 - info: heatingcontrol.0 room Flur EG Thermostat Thermostat Flur EG setpoint set to 16 2019-11-02 18:37:23.951 - info: heatingcontrol.0 room Leer Thermostat Thermostat Hannah setpoint set to 19 2019-11-02 18:38:03.348 - info: host.ioBroker object change system.adapter.heatingcontrol.0 2019-11-02 18:38:03.351 - info: heatingcontrol.0 cleaned everything up... 2019-11-02 18:38:03.349 - info: host.ioBroker stopInstance system.adapter.heatingcontrol.0 2019-11-02 18:38:03.349 - info: host.ioBroker stopInstance system.adapter.heatingcontrol.0 killing pid 5355 2019-11-02 18:38:03.366 - info: heatingcontrol.0 cleaned everything up... 2019-11-02 18:38:03.398 - info: host.ioBroker instance system.adapter.heatingcontrol.0 terminated with code 0 (OK) 2019-11-02 18:38:03.409 - info: host.ioBroker object change system.adapter.heatingcontrol.0 2019-11-02 18:38:03.435 - info: host.ioBroker instance system.adapter.heatingcontrol.0 started with pid 6126 2019-11-02 18:38:04.319 - debug: heatingcontrol.0 objectDB connected 2019-11-02 18:38:04.379 - debug: heatingcontrol.0 statesDB connected 2019-11-02 18:38:04.495 - info: heatingcontrol.0 starting. Version 0.3.2 in /opt/iobroker/node_modules/iobroker.heatingcontrol, node: v8.12.0 2019-11-02 18:38:04.499 - debug: heatingcontrol.0 devices [{"id":1,"name":"Büro setpoint","OID_Current":"mihome.0.devices.weather_v1_158d00023202ab.temperature","OID_Target":"maxcube.0.devices.thermostat_16a13f.setpoint","isActive":true,"type":1,"room":"Büro"},{"id":2,"name":"Is opened","OID_Current":"mihome.0.devices.magnet_158d0001c314f5.state","isActive":true,"type":3,"room":"Büro"},{"id":3,"name":"Thermostat Flur EG setpoint","OID_Current":"mihome.0.devices.weather_v1_158d0002387a24.temperature","OID_Target":"maxcube.0.devices.thermostat_196b47.setpoint","isActive":true,"type":1,"room":"Flur EG"},{"id":4,"name":"Is opened","OID_Current":"mihome.0.devices.magnet_158d0001c0a352.state","isActive":true,"type":3,"room":"Flur EG"},{"id":5,"name":"Thermostat Hannah setpoint","OID_Current":"maxcube.0.devices.thermostat_1a33ea.temp","OID_Target":"maxcube.0.devices.thermostat_1a33ea.setpoint","isActive":true,"type":1,"room":"Leer"},{"id":6,"name":"Balkontür is opened","OID_Current":"maxcube.0.devices.contact_1665a4.opened","isActive":true,"type":3,"room":"Leer"}] 2019-11-02 18:38:04.502 - debug: heatingcontrol.0 CreateDatepoints 2019-11-02 18:38:04.686 - debug: heatingcontrol.0 rooms 15 2019-11-02 18:38:04.686 - debug: heatingcontrol.0 create data points for Büro 2019-11-02 18:38:04.726 - debug: heatingcontrol.0 room Büro with 5 periods 2019-11-02 18:38:04.727 - debug: heatingcontrol.0 Profile Type Mo-FR + Sa-So, profiles 1 2019-11-02 18:38:04.727 - debug: heatingcontrol.0 add state Profiles.0.Büro.Mo-Fr.Periods.0 max 5 2019-11-02 18:38:04.729 - debug: heatingcontrol.0 add state Profiles.0.Büro.Mo-Fr.Periods.1 max 5 2019-11-02 18:38:04.729 - debug: heatingcontrol.0 add state Profiles.0.Büro.Mo-Fr.Periods.2 max 5 2019-11-02 18:38:04.729 - debug: heatingcontrol.0 add state Profiles.0.Büro.Mo-Fr.Periods.3 max 5 2019-11-02 18:38:04.730 - debug: heatingcontrol.0 add state Profiles.0.Büro.Mo-Fr.Periods.4 max 5 2019-11-02 18:38:04.730 - debug: heatingcontrol.0 add state Profiles.0.Büro.Su-So.Periods.0 max 5 2019-11-02 18:38:04.730 - debug: heatingcontrol.0 add state Profiles.0.Büro.Su-So.Periods.1 max 5 2019-11-02 18:38:04.730 - debug: heatingcontrol.0 add state Profiles.0.Büro.Su-So.Periods.2 max 5 2019-11-02 18:38:04.731 - debug: heatingcontrol.0 add state Profiles.0.Büro.Su-So.Periods.3 max 5 2019-11-02 18:38:04.731 - debug: heatingcontrol.0 add state Profiles.0.Büro.Su-So.Periods.4 max 5 2019-11-02 18:38:04.731 - debug: heatingcontrol.0 not active.... Flur OG 2019-11-02 18:38:04.731 - debug: heatingcontrol.0 not active.... Bad 2019-11-02 18:38:04.731 - debug: heatingcontrol.0 not active.... Garage 2019-11-02 18:38:04.731 - debug: heatingcontrol.0 not active.... Wohnzimmer 2019-11-02 18:38:04.732 - debug: heatingcontrol.0 not active.... Schlafzimmer 2019-11-02 18:38:04.732 - debug: heatingcontrol.0 create data points for Flur EG 2019-11-02 18:38:04.800 - debug: heatingcontrol.0 room Flur EG with 5 periods 2019-11-02 18:38:04.801 - debug: heatingcontrol.0 Profile Type Mo-FR + Sa-So, profiles 1 2019-11-02 18:38:04.801 - debug: heatingcontrol.0 add state Profiles.0.Flur EG.Mo-Fr.Periods.0 max 5 2019-11-02 18:38:04.802 - debug: heatingcontrol.0 add state Profiles.0.Flur EG.Mo-Fr.Periods.1 max 5 2019-11-02 18:38:04.802 - debug: heatingcontrol.0 add state Profiles.0.Flur EG.Mo-Fr.Periods.2 max 5 2019-11-02 18:38:04.802 - debug: heatingcontrol.0 add state Profiles.0.Flur EG.Mo-Fr.Periods.3 max 5 2019-11-02 18:38:04.803 - debug: heatingcontrol.0 add state Profiles.0.Flur EG.Mo-Fr.Periods.4 max 5 2019-11-02 18:38:04.803 - debug: heatingcontrol.0 add state Profiles.0.Flur EG.Su-So.Periods.0 max 5 2019-11-02 18:38:04.803 - debug: heatingcontrol.0 add state Profiles.0.Flur EG.Su-So.Periods.1 max 5 2019-11-02 18:38:04.803 - debug: heatingcontrol.0 add state Profiles.0.Flur EG.Su-So.Periods.2 max 5 2019-11-02 18:38:04.804 - debug: heatingcontrol.0 add state Profiles.0.Flur EG.Su-So.Periods.3 max 5 2019-11-02 18:38:04.804 - debug: heatingcontrol.0 add state Profiles.0.Flur EG.Su-So.Periods.4 max 5 2019-11-02 18:38:04.804 - debug: heatingcontrol.0 not active.... Bad EG 2019-11-02 18:38:04.804 - debug: heatingcontrol.0 not active.... Küche 2019-11-02 18:38:04.804 - debug: heatingcontrol.0 not active.... Aussen 2019-11-02 18:38:04.805 - debug: heatingcontrol.0 not active.... Esszimmer 2019-11-02 18:38:04.805 - debug: heatingcontrol.0 not active.... Waschküche 2019-11-02 18:38:04.805 - debug: heatingcontrol.0 not active.... Hannah Schafzimmer 2019-11-02 18:38:04.805 - debug: heatingcontrol.0 not active.... Hannah Wohnzimmer 2019-11-02 18:38:04.805 - debug: heatingcontrol.0 create data points for Leer 2019-11-02 18:38:04.872 - debug: heatingcontrol.0 room Leer with 5 periods 2019-11-02 18:38:04.872 - debug: heatingcontrol.0 Profile Type Mo-FR + Sa-So, profiles 1 2019-11-02 18:38:04.873 - debug: heatingcontrol.0 add state Profiles.0.Leer.Mo-Fr.Periods.0 max 5 2019-11-02 18:38:04.873 - debug: heatingcontrol.0 add state Profiles.0.Leer.Mo-Fr.Periods.1 max 5 2019-11-02 18:38:04.874 - debug: heatingcontrol.0 add state Profiles.0.Leer.Mo-Fr.Periods.2 max 5 2019-11-02 18:38:04.874 - debug: heatingcontrol.0 add state Profiles.0.Leer.Mo-Fr.Periods.3 max 5 2019-11-02 18:38:04.875 - debug: heatingcontrol.0 add state Profiles.0.Leer.Mo-Fr.Periods.4 max 5 2019-11-02 18:38:04.875 - debug: heatingcontrol.0 add state Profiles.0.Leer.Su-So.Periods.0 max 5 2019-11-02 18:38:04.875 - debug: heatingcontrol.0 add state Profiles.0.Leer.Su-So.Periods.1 max 5 2019-11-02 18:38:04.875 - debug: heatingcontrol.0 add state Profiles.0.Leer.Su-So.Periods.2 max 5 2019-11-02 18:38:04.876 - debug: heatingcontrol.0 add state Profiles.0.Leer.Su-So.Periods.3 max 5 2019-11-02 18:38:04.876 - debug: heatingcontrol.0 add state Profiles.0.Leer.Su-So.Periods.4 max 5 2019-11-02 18:38:04.877 - debug: heatingcontrol.0 #start subscribtion 2019-11-02 18:38:04.877 - debug: heatingcontrol.0 no subscribe Path2FeiertagAdapter 2019-11-02 18:38:04.877 - debug: heatingcontrol.0 no subscribe Path2PresentDP 2019-11-02 18:38:04.878 - info: heatingcontrol.0 subscribe Büro mihome.0.devices.magnet_158d0001c314f5.state 2019-11-02 18:38:04.879 - info: heatingcontrol.0 subscribe Flur EG mihome.0.devices.magnet_158d0001c0a352.state 2019-11-02 18:38:04.880 - info: heatingcontrol.0 subscribe Leer maxcube.0.devices.contact_1665a4.opened 2019-11-02 18:38:04.880 - debug: heatingcontrol.0 #subscribtion finished 2019-11-02 18:38:04.883 - debug: heatingcontrol.0 start CalculateNextTime, profile type 2 2019-11-02 18:38:04.883 - debug: heatingcontrol.0 get profile 2019-11-02 18:38:04.888 - debug: heatingcontrol.0 profile 0 2019-11-02 18:38:04.889 - debug: heatingcontrol.0 setting Mo - Fr 2019-11-02 18:38:04.957 - debug: heatingcontrol.0 ---1 found time for Büro at {"val":"05:00","ack":true,"ts":1572375462656,"q":0,"from":"system.adapter.heatingcontrol.0","lc":1572375462656} 05:00 2019-11-02 18:38:04.958 - debug: heatingcontrol.0 push to list = 05,00 2019-11-02 18:38:04.975 - debug: heatingcontrol.0 ---1 found time for Büro at {"val":"08:00","ack":true,"ts":1572375462657,"q":0,"from":"system.adapter.heatingcontrol.0","lc":1572375462657} 08:00 2019-11-02 18:38:04.975 - debug: heatingcontrol.0 push to list = 08,00 2019-11-02 18:38:04.978 - debug: heatingcontrol.0 ---1 found time for Büro at {"val":"12:00","ack":true,"ts":1572375462661,"q":0,"from":"system.adapter.heatingcontrol.0","lc":1572375462661} 12:00 2019-11-02 18:38:04.979 - debug: heatingcontrol.0 push to list = 12,00 2019-11-02 18:38:04.982 - debug: heatingcontrol.0 ---1 found time for Büro at {"val":"16:00","ack":true,"ts":1572375462680,"q":0,"from":"system.adapter.heatingcontrol.0","lc":1572375462680} 16:00 2019-11-02 18:38:04.982 - debug: heatingcontrol.0 push to list = 16,00 2019-11-02 18:38:04.985 - debug: heatingcontrol.0 ---1 found time for Büro at {"val":"21:00","ack":true,"ts":1572375462683,"q":0,"from":"system.adapter.heatingcontrol.0","lc":1572375462683} 21:00 2019-11-02 18:38:04.986 - debug: heatingcontrol.0 push to list = 21,00 2019-11-02 18:38:04.986 - debug: heatingcontrol.0 setting Sa - Su 2019-11-02 18:38:05.055 - debug: heatingcontrol.0 ---2 found time for Büro at {"val":"04:30","ack":true,"ts":1572712355411,"q":0,"from":"system.adapter.heatingcontrol.0","lc":1572712355406} 04:30 2019-11-02 18:38:05.056 - debug: heatingcontrol.0 push to list = 04,30 2019-11-02 18:38:05.063 - debug: heatingcontrol.0 ---2 found time for Büro at {"val":"08:00","ack":true,"ts":1572375462697,"q":0,"from":"system.adapter.heatingcontrol.0","lc":1572375462697} 08:00 2019-11-02 18:38:05.063 - debug: heatingcontrol.0 push to list = 08,00 2019-11-02 18:38:05.066 - debug: heatingcontrol.0 ---2 found time for Büro at {"val":"12:00","ack":true,"ts":1572375462698,"q":0,"from":"system.adapter.heatingcontrol.0","lc":1572375462698} 12:00 2019-11-02 18:38:05.066 - debug: heatingcontrol.0 push to list = 12,00 2019-11-02 18:38:05.069 - debug: heatingcontrol.0 ---2 found time for Büro at {"val":"16:00","ack":true,"ts":1572710430466,"q":0,"from":"system.adapter.heatingcontrol.0","lc":1572375462699} 16:00 2019-11-02 18:38:05.069 - debug: heatingcontrol.0 push to list = 16,00 2019-11-02 18:38:05.071 - debug: heatingcontrol.0 ---2 found time for Büro at {"val":"21:00","ack":true,"ts":1572375462703,"q":0,"from":"system.adapter.heatingcontrol.0","lc":1572375462703} 21:00 2019-11-02 18:38:05.072 - debug: heatingcontrol.0 push to list = 21,00 2019-11-02 18:38:05.072 - debug: heatingcontrol.0 setting Mo - Fr 2019-11-02 18:38:05.075 - debug: heatingcontrol.0 ---1 found time for Flur EG at {"val":"05:00","ack":true,"ts":1572715292758,"q":0,"from":"system.adapter.heatingcontrol.0","lc":1572715292758} 05:00 2019-11-02 18:38:05.077 - debug: heatingcontrol.0 ---1 found time for Flur EG at {"val":"08:00","ack":true,"ts":1572715292761,"q":0,"from":"system.adapter.heatingcontrol.0","lc":1572715292761} 08:00 2019-11-02 18:38:05.079 - debug: heatingcontrol.0 ---1 found time for Flur EG at {"val":"12:00","ack":true,"ts":1572715292773,"q":0,"from":"system.adapter.heatingcontrol.0","lc":1572715292773} 12:00 2019-11-02 18:38:05.082 - debug: heatingcontrol.0 ---1 found time for Flur EG at {"val":"16:00","ack":true,"ts":1572715292784,"q":0,"from":"system.adapter.heatingcontrol.0","lc":1572715292784} 16:00 2019-11-02 18:38:05.084 - debug: heatingcontrol.0 ---1 found time for Flur EG at {"val":"21:00","ack":true,"ts":1572715292788,"q":0,"from":"system.adapter.heatingcontrol.0","lc":1572715292788} 21:00 2019-11-02 18:38:05.085 - debug: heatingcontrol.0 setting Sa - Su 2019-11-02 18:38:05.087 - debug: heatingcontrol.0 ---2 found time for Flur EG at {"val":"05:00","ack":true,"ts":1572715292789,"q":0,"from":"system.adapter.heatingcontrol.0","lc":1572715292789} 05:00 2019-11-02 18:38:05.087 - debug: heatingcontrol.0 push to list = 05,00 2019-11-02 18:38:05.118 - debug: heatingcontrol.0 ---2 found time for Flur EG at {"val":"08:00","ack":true,"ts":1572715292790,"q":0,"from":"system.adapter.heatingcontrol.0","lc":1572715292790} 08:00 2019-11-02 18:38:05.121 - debug: heatingcontrol.0 ---2 found time for Flur EG at {"val":"12:00","ack":true,"ts":1572715292791,"q":0,"from":"system.adapter.heatingcontrol.0","lc":1572715292791} 12:00 2019-11-02 18:38:05.125 - debug: heatingcontrol.0 ---2 found time for Flur EG at {"val":"16:00","ack":true,"ts":1572715292792,"q":0,"from":"system.adapter.heatingcontrol.0","lc":1572715292792} 16:00 2019-11-02 18:38:05.128 - debug: heatingcontrol.0 ---2 found time for Flur EG at {"val":"21:00","ack":true,"ts":1572715292794,"q":0,"from":"system.adapter.heatingcontrol.0","lc":1572715292794} 21:00 2019-11-02 18:38:05.128 - debug: heatingcontrol.0 setting Mo - Fr 2019-11-02 18:38:05.131 - debug: heatingcontrol.0 ---1 found time for Leer at {"val":"05:00","ack":true,"ts":1572716243194,"q":0,"from":"system.adapter.heatingcontrol.0","lc":1572716243194} 05:00 2019-11-02 18:38:05.133 - debug: heatingcontrol.0 ---1 found time for Leer at {"val":"08:00","ack":true,"ts":1572716243202,"q":0,"from":"system.adapter.heatingcontrol.0","lc":1572716243202} 08:00 2019-11-02 18:38:05.136 - debug: heatingcontrol.0 ---1 found time for Leer at {"val":"12:00","ack":true,"ts":1572716243207,"q":0,"from":"system.adapter.heatingcontrol.0","lc":1572716243207} 12:00 2019-11-02 18:38:05.139 - debug: heatingcontrol.0 ---1 found time for Leer at {"val":"16:00","ack":true,"ts":1572716243209,"q":0,"from":"system.adapter.heatingcontrol.0","lc":1572716243209} 16:00 2019-11-02 18:38:05.141 - debug: heatingcontrol.0 ---1 found time for Leer at {"val":"21:00","ack":true,"ts":1572716243210,"q":0,"from":"system.adapter.heatingcontrol.0","lc":1572716243210} 21:00 2019-11-02 18:38:05.142 - debug: heatingcontrol.0 setting Sa - Su 2019-11-02 18:38:05.144 - debug: heatingcontrol.0 ---2 found time for Leer at {"val":"05:00","ack":true,"ts":1572716243248,"q":0,"from":"system.adapter.heatingcontrol.0","lc":1572716243248} 05:00 2019-11-02 18:38:05.182 - debug: heatingcontrol.0 ---2 found time for Leer at {"val":"08:00","ack":true,"ts":1572716243249,"q":0,"from":"system.adapter.heatingcontrol.0","lc":1572716243249} 08:00 2019-11-02 18:38:05.189 - debug: heatingcontrol.0 ---2 found time for Leer at {"val":"12:00","ack":true,"ts":1572716243250,"q":0,"from":"system.adapter.heatingcontrol.0","lc":1572716243250} 12:00 2019-11-02 18:38:05.192 - debug: heatingcontrol.0 ---2 found time for Leer at {"val":"16:00","ack":true,"ts":1572716243251,"q":0,"from":"system.adapter.heatingcontrol.0","lc":1572716243251} 16:00 2019-11-02 18:38:05.194 - debug: heatingcontrol.0 ---2 found time for Leer at {"val":"21:00","ack":true,"ts":1572716243252,"q":0,"from":"system.adapter.heatingcontrol.0","lc":1572716243252} 21:00 2019-11-02 18:38:05.195 - debug: heatingcontrol.0 create cron job #0 at 5:0 string: 0 0 5 * * 1-5 Europe/Berlin 2019-11-02 18:38:05.231 - debug: heatingcontrol.0 create cron job #1 at 8:0 string: 0 0 8 * * 1-5 Europe/Berlin 2019-11-02 18:38:05.243 - debug: heatingcontrol.0 create cron job #2 at 12:0 string: 0 0 12 * * 1-5 Europe/Berlin 2019-11-02 18:38:05.253 - debug: heatingcontrol.0 create cron job #3 at 16:0 string: 0 0 16 * * 1-5 Europe/Berlin 2019-11-02 18:38:05.259 - debug: heatingcontrol.0 create cron job #4 at 21:0 string: 0 0 21 * * 1-5 Europe/Berlin 2019-11-02 18:38:05.266 - debug: heatingcontrol.0 create cron job #5 at 4:30 string: 0 30 4 * * 0,6 Europe/Berlin 2019-11-02 18:38:05.276 - debug: heatingcontrol.0 create cron job #6 at 8:0 string: 0 0 8 * * 0,6 Europe/Berlin 2019-11-02 18:38:05.283 - debug: heatingcontrol.0 create cron job #7 at 12:0 string: 0 0 12 * * 0,6 Europe/Berlin 2019-11-02 18:38:05.289 - debug: heatingcontrol.0 create cron job #8 at 16:0 string: 0 0 16 * * 0,6 Europe/Berlin 2019-11-02 18:38:05.296 - debug: heatingcontrol.0 create cron job #9 at 21:0 string: 0 0 21 * * 0,6 Europe/Berlin 2019-11-02 18:38:05.301 - debug: heatingcontrol.0 create cron job #10 at 5:0 string: 0 0 5 * * 0,6 Europe/Berlin 2019-11-02 18:38:05.309 - debug: heatingcontrol.0 [INFO] status = true next event: 4 Nov 2019 05:00:00 2019-11-02 18:38:05.312 - debug: heatingcontrol.0 [INFO] status = true next event: 4 Nov 2019 08:00:00 2019-11-02 18:38:05.315 - debug: heatingcontrol.0 [INFO] status = true next event: 4 Nov 2019 12:00:00 2019-11-02 18:38:05.319 - debug: heatingcontrol.0 [INFO] status = true next event: 4 Nov 2019 16:00:00 2019-11-02 18:38:05.323 - debug: heatingcontrol.0 [INFO] status = true next event: 4 Nov 2019 21:00:00 2019-11-02 18:38:05.330 - debug: heatingcontrol.0 [INFO] status = true next event: 3 Nov 2019 04:30:00 2019-11-02 18:38:05.334 - debug: heatingcontrol.0 [INFO] status = true next event: 3 Nov 2019 08:00:00 2019-11-02 18:38:05.337 - debug: heatingcontrol.0 [INFO] status = true next event: 3 Nov 2019 12:00:00 2019-11-02 18:38:05.342 - debug: heatingcontrol.0 [INFO] status = true next event: 3 Nov 2019 16:00:00 2019-11-02 18:38:05.343 - debug: heatingcontrol.0 [INFO] status = true next event: 2 Nov 2019 21:00:00 2019-11-02 18:38:05.347 - debug: heatingcontrol.0 [INFO] status = true next event: 3 Nov 2019 05:00:00 2019-11-02 18:38:05.348 - debug: heatingcontrol.0 Check sensors for Büro 2019-11-02 18:38:05.353 - debug: heatingcontrol.0 got sensor state {"val":false,"ack":true,"ts":1572711961775,"q":0,"from":"system.adapter.mihome.0","lc":1572711961775} from mihome.0.devices.magnet_158d0001c314f5.state 2019-11-02 18:38:05.354 - debug: heatingcontrol.0 Check sensors for Flur EG 2019-11-02 18:38:05.357 - debug: heatingcontrol.0 got sensor state {"val":false,"ack":true,"ts":1572709544274,"q":0,"from":"system.adapter.mihome.0","lc":1572709544274} from mihome.0.devices.magnet_158d0001c0a352.state 2019-11-02 18:38:05.357 - debug: heatingcontrol.0 Check sensors for Leer 2019-11-02 18:38:05.361 - debug: heatingcontrol.0 got sensor state {"val":false,"ack":true,"ts":1570345680277,"q":0,"from":"system.adapter.maxcube.0","lc":1570345680277} from maxcube.0.devices.contact_1665a4.opened 2019-11-02 18:38:05.364 - info: heatingcontrol.0 calculating new target temperatures 2019-11-02 18:38:05.390 - debug: heatingcontrol.0 profile type 2 2019-11-02 18:38:05.390 - debug: heatingcontrol.0 get profile 2019-11-02 18:38:05.393 - debug: heatingcontrol.0 profile 0 2019-11-02 18:38:05.393 - debug: heatingcontrol.0 check room Büro 2019-11-02 18:38:05.393 - debug: heatingcontrol.0 number of periods 5 2019-11-02 18:38:05.394 - debug: heatingcontrol.0 check ID Profiles.0.Büro.Su-So.Periods.0.time 2019-11-02 18:38:05.399 - debug: heatingcontrol.0 check time for Büro Profiles.0.Büro.Su-So.Periods.0.time 19 2019-11-02 18:38:05.400 - debug: heatingcontrol.0 check ID Profiles.0.Büro.Su-So.Periods.1.time 2019-11-02 18:38:05.406 - debug: heatingcontrol.0 check time for Büro Profiles.0.Büro.Su-So.Periods.1.time 21 2019-11-02 18:38:05.406 - debug: heatingcontrol.0 check ID Profiles.0.Büro.Su-So.Periods.2.time 2019-11-02 18:38:05.412 - debug: heatingcontrol.0 check time for Büro Profiles.0.Büro.Su-So.Periods.2.time 21 2019-11-02 18:38:05.413 - debug: heatingcontrol.0 check ID Profiles.0.Büro.Su-So.Periods.3.time 2019-11-02 18:38:05.418 - debug: heatingcontrol.0 check time for Büro Profiles.0.Büro.Su-So.Periods.3.time 19 2019-11-02 18:38:05.418 - debug: heatingcontrol.0 check ID Profiles.0.Büro.Su-So.Periods.4.time 2019-11-02 18:38:05.422 - debug: heatingcontrol.0 ### 19 0 0 0 0 0 2019-11-02 18:38:05.422 - info: heatingcontrol.0 room Büro Thermostat Büro setpoint set to 19 2019-11-02 18:38:05.425 - debug: heatingcontrol.0 thermostat maxcube.0.devices.thermostat_16a13f.setpoint nothing to do, already 19 2019-11-02 18:38:05.432 - debug: heatingcontrol.0 check room Flur EG 2019-11-02 18:38:05.432 - debug: heatingcontrol.0 number of periods 5 2019-11-02 18:38:05.432 - debug: heatingcontrol.0 check ID Profiles.0.Flur EG.Su-So.Periods.0.time 2019-11-02 18:38:05.438 - debug: heatingcontrol.0 check time for Flur EG Profiles.0.Flur EG.Su-So.Periods.0.time 16 2019-11-02 18:38:05.439 - debug: heatingcontrol.0 check ID Profiles.0.Flur EG.Su-So.Periods.1.time 2019-11-02 18:38:05.444 - debug: heatingcontrol.0 check time for Flur EG Profiles.0.Flur EG.Su-So.Periods.1.time 16 2019-11-02 18:38:05.444 - debug: heatingcontrol.0 check ID Profiles.0.Flur EG.Su-So.Periods.2.time 2019-11-02 18:38:05.450 - debug: heatingcontrol.0 check time for Flur EG Profiles.0.Flur EG.Su-So.Periods.2.time 16 2019-11-02 18:38:05.450 - debug: heatingcontrol.0 check ID Profiles.0.Flur EG.Su-So.Periods.3.time 2019-11-02 18:38:05.456 - debug: heatingcontrol.0 check time for Flur EG Profiles.0.Flur EG.Su-So.Periods.3.time 16 2019-11-02 18:38:05.456 - debug: heatingcontrol.0 check ID Profiles.0.Flur EG.Su-So.Periods.4.time 2019-11-02 18:38:05.459 - debug: heatingcontrol.0 ### 16 0 0 0 0 0 2019-11-02 18:38:05.459 - info: heatingcontrol.0 room Flur EG Thermostat Thermostat Flur EG setpoint set to 16 2019-11-02 18:38:05.463 - debug: heatingcontrol.0 thermostat maxcube.0.devices.thermostat_196b47.setpoint nothing to do, already 16 2019-11-02 18:38:05.469 - debug: heatingcontrol.0 check room Leer 2019-11-02 18:38:05.469 - debug: heatingcontrol.0 number of periods 5 2019-11-02 18:38:05.470 - debug: heatingcontrol.0 check ID Profiles.0.Leer.Su-So.Periods.0.time 2019-11-02 18:38:05.475 - debug: heatingcontrol.0 check time for Leer Profiles.0.Leer.Su-So.Periods.0.time 19 2019-11-02 18:38:05.476 - debug: heatingcontrol.0 check ID Profiles.0.Leer.Su-So.Periods.1.time 2019-11-02 18:38:05.481 - debug: heatingcontrol.0 check time for Leer Profiles.0.Leer.Su-So.Periods.1.time 21 2019-11-02 18:38:05.482 - debug: heatingcontrol.0 check ID Profiles.0.Leer.Su-So.Periods.2.time 2019-11-02 18:38:05.487 - debug: heatingcontrol.0 check time for Leer Profiles.0.Leer.Su-So.Periods.2.time 21 2019-11-02 18:38:05.488 - debug: heatingcontrol.0 check ID Profiles.0.Leer.Su-So.Periods.3.time 2019-11-02 18:38:05.493 - debug: heatingcontrol.0 check time for Leer Profiles.0.Leer.Su-So.Periods.3.time 19 2019-11-02 18:38:05.494 - debug: heatingcontrol.0 check ID Profiles.0.Leer.Su-So.Periods.4.time 2019-11-02 18:38:05.497 - debug: heatingcontrol.0 ### 19 0 0 0 0 0 2019-11-02 18:38:05.497 - info: heatingcontrol.0 room Leer Thermostat Thermostat Hannah setpoint set to 19 2019-11-02 18:38:05.525 - debug: heatingcontrol.0 thermostat maxcube.0.devices.thermostat_1a33ea.setpoint to 19 2019-11-02 18:38:05.538 - debug: heatingcontrol.0 [INFO] status = true next event: 4 Nov 2019 05:00:00 2019-11-02 18:38:05.541 - debug: heatingcontrol.0 [INFO] status = true next event: 4 Nov 2019 08:00:00 2019-11-02 18:38:05.545 - debug: heatingcontrol.0 [INFO] status = true next event: 4 Nov 2019 12:00:00 2019-11-02 18:38:05.549 - debug: heatingcontrol.0 [INFO] status = true next event: 4 Nov 2019 16:00:00 2019-11-02 18:38:05.554 - debug: heatingcontrol.0 [INFO] status = true next event: 4 Nov 2019 21:00:00 2019-11-02 18:38:05.562 - debug: heatingcontrol.0 [INFO] status = true next event: 3 Nov 2019 04:30:00 2019-11-02 18:38:05.565 - debug: heatingcontrol.0 [INFO] status = true next event: 3 Nov 2019 08:00:00 2019-11-02 18:38:05.569 - debug: heatingcontrol.0 [INFO] status = true next event: 3 Nov 2019 12:00:00 2019-11-02 18:38:05.576 - debug: heatingcontrol.0 [INFO] status = true next event: 3 Nov 2019 16:00:00 2019-11-02 18:38:05.578 - debug: heatingcontrol.0 [INFO] status = true next event: 2 Nov 2019 21:00:00 2019-11-02 18:38:05.581 - debug: heatingcontrol.0 [INFO] status = true next event: 3 Nov 2019 05:00:00 2019-11-02 18:38:08.247 - debug: heatingcontrol.0 system.adapter.admin.0: logging true 2019-11-02 18:38:36.086 - debug: heatingcontrol.0 system.adapter.admin.0: logging false 2019-11-02 18:39:17.324 - debug: heatingcontrol.0 ### start ListFunctions 2019-11-02 18:39:17.330 - debug: heatingcontrol.0 all rooms done [{"id":1,"name":"Büro setpoint","OID_Current":"mihome.0.devices.weather_v1_158d00023202ab.temperature","OID_Target":"maxcube.0.devices.thermostat_16a13f.setpoint","isActive":true,"type":1,"room":"Büro"},{"id":2,"name":"Is opened","OID_Current":"mihome.0.devices.magnet_158d0001c314f5.state","isActive":true,"type":3,"room":"Büro"},{"id":3,"name":"Thermostat Flur EG setpoint","OID_Current":"mihome.0.devices.weather_v1_158d0002387a24.temperature","OID_Target":"maxcube.0.devices.thermostat_196b47.setpoint","isActive":true,"type":1,"room":"Flur EG"},{"id":4,"name":"Is opened","OID_Current":"mihome.0.devices.magnet_158d0001c0a352.state","isActive":true,"type":3,"room":"Flur EG"},{"id":5,"name":"Thermostat Hannah setpoint","OID_Current":"maxcube.0.devices.thermostat_1a33ea.temp","OID_Target":"maxcube.0.devices.thermostat_1a33ea.setpoint","isActive":true,"type":1,"room":"Leer"},{"id":6,"name":"Balkontür is opened","OID_Current":"maxcube.0.devices.contact_1665a4.opened","isActive":true,"type":3,"room":"Leer"}] 2019-11-02 18:39:17.331 - debug: heatingcontrol.0 sendTo "listDevices" to system.adapter.admin.0 from system.adapter.heatingcontrol.0 2019-11-02 18:39:17.334 - debug: heatingcontrol.0 all rooms done [{"id":1,"name":"Büro setpoint","OID_Current":"mihome.0.devices.weather_v1_158d00023202ab.temperature","OID_Target":"maxcube.0.devices.thermostat_16a13f.setpoint","isActive":true,"type":1,"room":"Büro"},{"id":2,"name":"Is opened","OID_Current":"mihome.0.devices.magnet_158d0001c314f5.state","isActive":true,"type":3,"room":"Büro"},{"id":3,"name":"Thermostat Flur EG setpoint","OID_Current":"mihome.0.devices.weather_v1_158d0002387a24.temperature","OID_Target":"maxcube.0.devices.thermostat_196b47.setpoint","isActive":true,"type":1,"room":"Flur EG"},{"id":4,"name":"Is opened","OID_Current":"mihome.0.devices.magnet_158d0001c0a352.state","isActive":true,"type":3,"room":"Flur EG"},{"id":5,"name":"Thermostat Hannah setpoint","OID_Current":"maxcube.0.devices.thermostat_1a33ea.temp","OID_Target":"maxcube.0.devices.thermostat_1a33ea.setpoint","isActive":true,"type":1,"room":"Leer"},{"id":6,"name":"Balkontür is opened","OID_Current":"maxcube.0.devices.contact_1665a4.opened","isActive":true,"type":3,"room":"Leer"}] 2019-11-02 18:39:17.335 - debug: heatingcontrol.0 sendTo "listRooms" to system.adapter.admin.0 from system.adapter.heatingcontrol.0 2019-11-02 18:39:17.366 - debug: heatingcontrol.0 function enums: {"result":{"enum.functions.color":{"_id":"enum.functions.color","common":{"name":"Color","members":[]},"type":"enum","native":{},"from":"system.host.ioBroker.cli","ts":1562830525027}},"requestEnum":"enum.functions"} 2019-11-02 18:39:17.377 - debug: heatingcontrol.0 all functions done [{"name":"Color"}] 2019-11-02 18:39:17.381 - debug: heatingcontrol.0 sendTo "listFunctions" to system.adapter.admin.0 from system.adapter.heatingcontrol.0 2019-11-02 18:40:41.159 - info: host.ioBroker object change system.adapter.heatingcontrol.0 2019-11-02 18:40:41.161 - info: heatingcontrol.0 cleaned everything up... 2019-11-02 18:40:41.159 - info: host.ioBroker stopInstance system.adapter.heatingcontrol.0 2019-11-02 18:40:41.159 - info: host.ioBroker stopInstance system.adapter.heatingcontrol.0 killing pid 6126 2019-11-02 18:40:41.162 - debug: heatingcontrol.0 delete 11 cron jobs 2019-11-02 18:40:41.163 - debug: heatingcontrol.0 cron job stopped 2019-11-02 18:40:41.163 - debug: heatingcontrol.0 cron job stopped 2019-11-02 18:40:41.163 - debug: heatingcontrol.0 cron job stopped 2019-11-02 18:40:41.164 - debug: heatingcontrol.0 cron job stopped 2019-11-02 18:40:41.164 - debug: heatingcontrol.0 cron job stopped 2019-11-02 18:40:41.164 - debug: heatingcontrol.0 cron job stopped 2019-11-02 18:40:41.165 - debug: heatingcontrol.0 cron job stopped 2019-11-02 18:40:41.165 - debug: heatingcontrol.0 cron job stopped 2019-11-02 18:40:41.165 - debug: heatingcontrol.0 cron job stopped 2019-11-02 18:40:41.166 - debug: heatingcontrol.0 cron job stopped 2019-11-02 18:40:41.166 - debug: heatingcontrol.0 cron job stopped 2019-11-02 18:40:41.188 - debug: heatingcontrol.0 [OBJECT CHANGE] ==== system.adapter.heatingcontrol.0 === {"_id":"system.adapter.heatingcontrol.0","type":"instance","common":{"name":"heatingcontrol","version":"0.3.1","news":{"0.2.0":{"en":"path to Feiertag-Adapter can also include a complete datapoint path ","de":"Pfad zum Feiertag-Adapter kann auch einen vollständigen Datenpunktpfad enthalten","ru":"путь к Feiertag-Adapter может также включать полный путь к точке данных","pt":"O caminho para o Feiertag-Adapter também pode incluir um caminho completo do ponto de dados","nl":"pad naar Feiertag-Adapter kan ook een compleet datapuntpad bevatten","fr":"Le chemin vers Feiertag-Adapter peut également inclure un chemin complet de point de données.","it":"Il percorso di Feiertag-Adapter può anche includere un percorso completo di punti dati","es":"ruta a Feiertag-Adapter también puede incluir una ruta completa de punto de datos","pl":"ścieżka do Feiertag-Adapter może również zawierać pełną ścieżkę punktu danych","zh-cn":"Feiertag-Adapter的路径还可以包含完整的数据点路径"},"0.1.0":{"en":"redesign data structure","de":"Neugestaltung der Datenstruktur","ru":"перепроектировать структуру данных","pt":"redesenhar estrutura de dados","nl":"gegevensstructuur opnieuw ontwerpen","fr":"refonte de la structure de données","it":"riprogettare la struttura dei dati","es":"rediseño de estructura de datos","pl":"przeprojektowanie struktury danych","zh-cn":"重新设计数据结构"},"0.0.5":{"en":"support for max! thermostats","de":"Unterstützung für max!-Thermostate","ru":"поддержка термостатов max!","pt":"suporte para termostatos max!","nl":"ondersteuning voor max!-thermostaten","fr":"support pour les thermostats max!","it":"supporto per i termostati max!","es":"soporte para termostatos max!","pl":"obsługa termostatów max!","zh-cn":"支持max！恒温器"},"0.0.3":{"en":"ready for first publish","pt":"pronto para primeiro publicar","de":"bereit für die erste Veröffentlichung","nl":"klaar voor de eerste publicatie","it":"pronto per la prima pubblicazione","es":"listo para primera publicacion","pl":"gotowy do pierwszego opublikowania","zh-cn":"准备好首次发布","fr":"prêt pour la première publication","ru":"готов к первой публикации"},"0.0.2":{"en":"actuator handling added","de":"Aktuatorhandling hinzugefügt","pl":"dodano obsługę siłownika","zh-cn":"执行器处理添加","nl":"actuator handling toegevoegd","fr":"actionneur manipulation ajouté","ru":"добавлена обработка привода","pt":"manuseio do atuador adicionado","it":"aggiunta della movimentazione dell'attuatore","es":"manejo del actuador agregado"},"0.3.1":{"en":"some bug fixes","de":"einige Bugfixes","ru":"некоторые исправления ошибок","pt":"algumas correções de bugs","nl":"enkele bugfixes","fr":"quelques corrections de bugs","it":"alcune correzioni di bug","es":"algunas correcciones de errores","pl":"niektóre poprawki błędów","zh-cn":"一些错误修复"},"0.3.0":{"en":"manuel temperature setting, configurable heating period and more","de":"Manuelle Temperatureinstellung, konfigurierbare Heizperiode und mehr","ru":"настройка температуры в мануале, настраиваемый период нагрева и многое другое","pt":"ajuste da temperatura de manuel, período de aquecimento configurável e muito mais","nl":"handmatige temperatuurinstelling, configureerbare verwarmingsperiode en meer","fr":"réglage manuel de la température, période de chauffage configurable et plus","it":"impostazione della temperatura manuale, periodo di riscaldamento configurabile e altro","es":"ajuste de temperatura manual, período de calentamiento configurable y más","pl":"ustawienie temperatury manuel, konfigurowalny okres ogrzewania i więcej","zh-cn":"手动设定温度，可设定的加热时间等"},"0.2.3":{"en":"some bug fixes","de":"einige Bugfixes","ru":"некоторые исправления ошибок","pt":"algumas correções de bugs","nl":"enkele bugfixes","fr":"quelques corrections de bugs","it":"alcune correzioni di bug","es":"algunas correcciones de errores","pl":"niektóre poprawki błędów","zh-cn":"一些错误修复"},"0.2.1":{"en":"bug fixes in actuator handling","de":"Fehlerbehebungen im Umgang mit Aktuatoren","ru":"исправлены ошибки в работе привода","pt":"correções de erros no manuseio do atuador","nl":"bugfixes bij bediening van de actuator","fr":"corrections de bugs dans la manipulation des actionneurs","it":"correzioni di errori nella gestione dell'attuatore","es":"correcciones de errores en el manejo del actuador","pl":"poprawki błędów w obsłudze siłowników","zh-cn":"执行器处理中的错误修复"}},"title":"HeatingControl","desc":{"en":"Heating Control ","de":"Heizungsregelung","ru":"Управление отоплением","pt":"Controle de aquecimento","nl":"Verwarmingsregeling","fr":"Contrôle de chauffage","pl":"Sterowanie ogrzewaniem","zh-cn":"加热控制","it":"Controllo del riscaldamento","es":"Control de calefacción"},"platform":"Javascript/Node.js","mode":"daemon","icon":"heatingcontrol.png","enabled":true,"messagebox":true,"extIcon":"https://raw.githubusercontent.com/rg-engineering/ioBroker.heatingcontrol/master/admin/heatingcontrol.png","keywords":["heating"],"readme":"https://github.com/rg-engineering/ioBroker.heatingcontrol/blob/master/README.md","loglevel":"debug","stopBeforeUpdate":true,"type":"climate-control","license":"MIT","materialize":true,"compact":true,"authors":[{"name":"René G.","email":"info@rg-engineering.eu"}],"installedVersion":"0.3.1","host":"ioBroker"},"native":{"rooms":[{"name":"Büro","isActive":true,"WindowIsOpen":false},{"name":"Flur OG","isActive":true,"WindowIsOpen":false},{"name":"Bad","isActive":false,"WindowIsOpen":false},{"name":"Garage","isActive":false,"WindowIsOpen":false},{"name":"Wohnzimmer","isActive":false,"WindowIsOpen":false},{"name":"Schlafzimmer","isActive":false,"WindowIsOpen":false},{"name":"Flur EG","isActive":true,"WindowIsOpen":false},{"name":"Bad EG","isActive":false,"WindowIsOpen":false},{"name":"Küche","isActive":false,"WindowIsOpen":false},{"name":"Aussen","isActive":false,"WindowIsOpen":false},{"name":"Esszimmer","isActive":false,"WindowIsOpen":false},{"name":"Waschküche","isActive":false,"WindowIsOpen":false},{"name":"Hannah Schafzimmer","isActive":false,"WindowIsOpen":false},{"name":"Hannah Wohnzimmer","isActive":false,"WindowIsOpen":false},{"name":"Leer","isActive":true,"WindowIsOpen":false}],"UseActors":false,"Gewerk":"1","ProfileType":"2","NumberOfProfiles":"1","NumberOfPeriods":"5","timezone":"Europe/Berlin","deleteall":false,"UseActorsIfNotHeating":"1","UseActorsIfNoThermostat":"1","Path2FeiertagAdapter":"","PublicHolidayLikeSunday":true,"UseSensors":true,"devices":[{"id":1,"name":"Büro setpoint","OID_Current":"mihome.0.devices.weather_v1_158d00023202ab.temperature","OID_Target":"maxcube.0.devices.thermostat_16a13f.setpoint","isActive":true,"type":1,"room":"Büro"},{"id":2,"name":"Is opened","OID_Current":"mihome.0.devices.magnet_158d0001c314f5.state","isActive":true,"type":3,"room":"Büro"},{"id":3,"name":"Thermostat Flur EG setpoint","OID_Current":"mihome.0.devices.weather_v1_158d0002387a24.temperature","OID_Target":"maxcube.0.devices.thermostat_196b47.setpoint","isActive":true,"type":1,"room":"Flur EG"},{"id":4,"name":"Is opened","OID_Current":"mihome.0.devices.magnet_158d0001c0a352.state","isActive":true,"type":3,"room":"Flur EG"},{"id":5,"name":"Thermostat Hannah setpoint","OID_Current":"maxcube.0.devices.thermostat_1a33ea.temp","OID_Target":"maxcube.0.devices.thermostat_1a33ea.setpoint","isActive":true,"type":1,"room":"Leer"},{"id":6,"name":"Balkontür is opened","OID_Current":"maxcube.0.devices.contact_1665a4.opened","isActive":true,"type":3,"room":"Leer"},{"id":7,"name":"Thermostat 1 setpoint","OID_Current":"mihome.0.devices.weather_v1_158d0002387a24.temperature","OID_Target":"maxcube.0.devices.thermostat_1a33d9.setpoint","isActive":true,"type":1,"room":"Flur OG"},{"id":8,"name":"Is opened","OID_Current":"mihome.0.devices.magnet_158d0001b77aee.state","isActive":true,"type":3,"room":"Flur OG"}],"Path2PresentDP":"","UseFixHeatingPeriod":false,"FixHeatingPeriodStart":"01.10.","FixHeatingPeriodEnd":"31.03."},"from":"system.adapter.admin.0","ts":1572716283393} 2019-11-02 18:40:41.212 - info: host.ioBroker instance system.adapter.heatingcontrol.0 terminated with code 0 (OK) 2019-11-02 18:40:43.683 - info: host.ioBroker instance system.adapter.heatingcontrol.0 started with pid 8714 2019-11-02 18:40:44.477 - debug: heatingcontrol.0 objectDB connected 2019-11-02 18:40:44.529 - debug: heatingcontrol.0 statesDB connected 2019-11-02 18:40:44.645 - info: heatingcontrol.0 starting. Version 0.3.2 in /opt/iobroker/node_modules/iobroker.heatingcontrol, node: v8.12.0 2019-11-02 18:40:44.649 - debug: heatingcontrol.0 devices [{"id":1,"name":"Büro setpoint","OID_Current":"mihome.0.devices.weather_v1_158d00023202ab.temperature","OID_Target":"maxcube.0.devices.thermostat_16a13f.setpoint","isActive":true,"type":1,"room":"Büro"},{"id":2,"name":"Is opened","OID_Current":"mihome.0.devices.magnet_158d0001c314f5.state","isActive":true,"type":3,"room":"Büro"},{"id":3,"name":"Thermostat Flur EG setpoint","OID_Current":"mihome.0.devices.weather_v1_158d0002387a24.temperature","OID_Target":"maxcube.0.devices.thermostat_196b47.setpoint","isActive":true,"type":1,"room":"Flur EG"},{"id":4,"name":"Is opened","OID_Current":"mihome.0.devices.magnet_158d0001c0a352.state","isActive":true,"type":3,"room":"Flur EG"},{"id":5,"name":"Thermostat Hannah setpoint","OID_Current":"maxcube.0.devices.thermostat_1a33ea.temp","OID_Target":"maxcube.0.devices.thermostat_1a33ea.setpoint","isActive":true,"type":1,"room":"Leer"},{"id":6,"name":"Balkontür is opened","OID_Current":"maxcube.0.devices.contact_1665a4.opened","isActive":true,"type":3,"room":"Leer"},{"id":7,"name":"Thermostat 1 setpoint","OID_Current":"mihome.0.devices.weather_v1_158d0002387a24.temperature","OID_Target":"maxcube.0.devices.thermostat_1a33d9.setpoint","isActive":true,"type":1,"room":"Flur OG"},{"id":8,"name":"Is opened","OID_Current":"mihome.0.devices.magnet_158d0001b77aee.state","isActive":true,"type":3,"room":"Flur OG"}] 2019-11-02 18:40:44.652 - debug: heatingcontrol.0 CreateDatepoints 2019-11-02 18:40:44.854 - debug: heatingcontrol.0 rooms 15 2019-11-02 18:40:44.855 - debug: heatingcontrol.0 create data points for Büro 2019-11-02 18:40:44.904 - debug: heatingcontrol.0 room Büro with 5 periods 2019-11-02 18:40:44.905 - debug: heatingcontrol.0 Profile Type Mo-FR + Sa-So, profiles 1 2019-11-02 18:40:44.905 - debug: heatingcontrol.0 add state Profiles.0.Büro.Mo-Fr.Periods.0 max 5 2019-11-02 18:40:44.906 - debug: heatingcontrol.0 add state Profiles.0.Büro.Mo-Fr.Periods.1 max 5 2019-11-02 18:40:44.907 - debug: heatingcontrol.0 add state Profiles.0.Büro.Mo-Fr.Periods.2 max 5 2019-11-02 18:40:44.907 - debug: heatingcontrol.0 add state Profiles.0.Büro.Mo-Fr.Periods.3 max 5 2019-11-02 18:40:44.907 - debug: heatingcontrol.0 add state Profiles.0.Büro.Mo-Fr.Periods.4 max 5 2019-11-02 18:40:44.908 - debug: heatingcontrol.0 add state Profiles.0.Büro.Su-So.Periods.0 max 5 2019-11-02 18:40:44.908 - debug: heatingcontrol.0 add state Profiles.0.Büro.Su-So.Periods.1 max 5 2019-11-02 18:40:44.908 - debug: heatingcontrol.0 add state Profiles.0.Büro.Su-So.Periods.2 max 5 2019-11-02 18:40:44.909 - debug: heatingcontrol.0 add state Profiles.0.Büro.Su-So.Periods.3 max 5 2019-11-02 18:40:44.909 - debug: heatingcontrol.0 add state Profiles.0.Büro.Su-So.Periods.4 max 5 2019-11-02 18:40:44.909 - debug: heatingcontrol.0 create data points for Flur OG 2019-11-02 18:40:45.125 - debug: heatingcontrol.0 ### handle state change heatingcontrol.0.Profiles.0.Flur OG.TemperaturOverrideTime {"val":"00:00","ack":true,"ts":1572716445118,"q":0,"from":"system.adapter.heatingcontrol.0","lc":1572716445118} 2019-11-02 18:40:45.125 - debug: heatingcontrol.0 ### heatingcontrol.0.Profiles.0.Flur OG.TemperaturOverrideTime 00:00 1 2019-11-02 18:40:45.127 - info: heatingcontrol.0 start temperature override for room Flur OG 2019-11-02 18:40:45.128 - debug: heatingcontrol.0 get profile 2019-11-02 18:40:45.132 - debug: heatingcontrol.0 room Flur OG with 5 periods 2019-11-02 18:40:45.132 - debug: heatingcontrol.0 Profile Type Mo-FR + Sa-So, profiles 1 2019-11-02 18:40:45.133 - debug: heatingcontrol.0 add state Profiles.0.Flur OG.Mo-Fr.Periods.0 max 5 2019-11-02 18:40:45.134 - debug: heatingcontrol.0 add state Profiles.0.Flur OG.Mo-Fr.Periods.1 max 5 2019-11-02 18:40:45.134 - debug: heatingcontrol.0 add state Profiles.0.Flur OG.Mo-Fr.Periods.2 max 5 2019-11-02 18:40:45.135 - debug: heatingcontrol.0 add state Profiles.0.Flur OG.Mo-Fr.Periods.3 max 5 2019-11-02 18:40:45.135 - debug: heatingcontrol.0 add state Profiles.0.Flur OG.Mo-Fr.Periods.4 max 5 2019-11-02 18:40:45.135 - debug: heatingcontrol.0 add state Profiles.0.Flur OG.Su-So.Periods.0 max 5 2019-11-02 18:40:45.136 - debug: heatingcontrol.0 add state Profiles.0.Flur OG.Su-So.Periods.1 max 5 2019-11-02 18:40:45.136 - debug: heatingcontrol.0 add state Profiles.0.Flur OG.Su-So.Periods.2 max 5 2019-11-02 18:40:45.136 - debug: heatingcontrol.0 add state Profiles.0.Flur OG.Su-So.Periods.3 max 5 2019-11-02 18:40:45.136 - debug: heatingcontrol.0 add state Profiles.0.Flur OG.Su-So.Periods.4 max 5 2019-11-02 18:40:45.137 - debug: heatingcontrol.0 not active.... Bad 2019-11-02 18:40:45.137 - debug: heatingcontrol.0 not active.... Garage 2019-11-02 18:40:45.137 - debug: heatingcontrol.0 not active.... Wohnzimmer 2019-11-02 18:40:45.137 - debug: heatingcontrol.0 not active.... Schlafzimmer 2019-11-02 18:40:45.138 - debug: heatingcontrol.0 create data points for Flur EG 2019-11-02 18:40:45.138 - debug: heatingcontrol.0 profile 0 2019-11-02 18:40:45.181 - warn: heatingcontrol.0 override temperature not valid: 0 2019-11-02 18:40:45.188 - debug: heatingcontrol.0 ### 111 handled 2019-11-02 18:40:45.188 - debug: heatingcontrol.0 ### all StateChange handled 2019-11-02 18:40:45.494 - debug: heatingcontrol.0 room Flur EG with 5 periods 2019-11-02 18:40:45.494 - debug: heatingcontrol.0 Profile Type Mo-FR + Sa-So, profiles 1 2019-11-02 18:40:45.495 - debug: heatingcontrol.0 add state Profiles.0.Flur EG.Mo-Fr.Periods.0 max 5 2019-11-02 18:40:45.495 - debug: heatingcontrol.0 add state Profiles.0.Flur EG.Mo-Fr.Periods.1 max 5 2019-11-02 18:40:45.496 - debug: heatingcontrol.0 add state Profiles.0.Flur EG.Mo-Fr.Periods.2 max 5 2019-11-02 18:40:45.496 - debug: heatingcontrol.0 add state Profiles.0.Flur EG.Mo-Fr.Periods.3 max 5 2019-11-02 18:40:45.496 - debug: heatingcontrol.0 add state Profiles.0.Flur EG.Mo-Fr.Periods.4 max 5 2019-11-02 18:40:45.497 - debug: heatingcontrol.0 add state Profiles.0.Flur EG.Su-So.Periods.0 max 5 2019-11-02 18:40:45.497 - debug: heatingcontrol.0 add state Profiles.0.Flur EG.Su-So.Periods.1 max 5 2019-11-02 18:40:45.497 - debug: heatingcontrol.0 add state Profiles.0.Flur EG.Su-So.Periods.2 max 5 2019-11-02 18:40:45.497 - debug: heatingcontrol.0 add state Profiles.0.Flur EG.Su-So.Periods.3 max 5 2019-11-02 18:40:45.498 - debug: heatingcontrol.0 add state Profiles.0.Flur EG.Su-So.Periods.4 max 5 2019-11-02 18:40:45.498 - debug: heatingcontrol.0 not active.... Bad EG 2019-11-02 18:40:45.498 - debug: heatingcontrol.0 not active.... Küche 2019-11-02 18:40:45.498 - debug: heatingcontrol.0 not active.... Aussen 2019-11-02 18:40:45.498 - debug: heatingcontrol.0 not active.... Esszimmer 2019-11-02 18:40:45.498 - debug: heatingcontrol.0 not active.... Waschküche 2019-11-02 18:40:45.498 - debug: heatingcontrol.0 not active.... Hannah Schafzimmer 2019-11-02 18:40:45.499 - debug: heatingcontrol.0 not active.... Hannah Wohnzimmer 2019-11-02 18:40:45.499 - debug: heatingcontrol.0 create data points for Leer 2019-11-02 18:40:45.638 - debug: heatingcontrol.0 room Leer with 5 periods 2019-11-02 18:40:45.639 - debug: heatingcontrol.0 Profile Type Mo-FR + Sa-So, profiles 1 2019-11-02 18:40:45.639 - debug: heatingcontrol.0 add state Profiles.0.Leer.Mo-Fr.Periods.0 max 5 2019-11-02 18:40:45.641 - debug: heatingcontrol.0 add state Profiles.0.Leer.Mo-Fr.Periods.1 max 5 2019-11-02 18:40:45.642 - debug: heatingcontrol.0 add state Profiles.0.Leer.Mo-Fr.Periods.2 max 5 2019-11-02 18:40:45.642 - debug: heatingcontrol.0 add state Profiles.0.Leer.Mo-Fr.Periods.3 max 5 2019-11-02 18:40:45.643 - debug: heatingcontrol.0 add state Profiles.0.Leer.Mo-Fr.Periods.4 max 5 2019-11-02 18:40:45.643 - debug: heatingcontrol.0 add state Profiles.0.Leer.Su-So.Periods.0 max 5 2019-11-02 18:40:45.644 - debug: heatingcontrol.0 add state Profiles.0.Leer.Su-So.Periods.1 max 5 2019-11-02 18:40:45.644 - debug: heatingcontrol.0 add state Profiles.0.Leer.Su-So.Periods.2 max 5 2019-11-02 18:40:45.645 - debug: heatingcontrol.0 add state Profiles.0.Leer.Su-So.Periods.3 max 5 2019-11-02 18:40:45.645 - debug: heatingcontrol.0 add state Profiles.0.Leer.Su-So.Periods.4 max 5 2019-11-02 18:40:45.649 - debug: heatingcontrol.0 #start subscribtion 2019-11-02 18:40:45.650 - debug: heatingcontrol.0 no subscribe Path2FeiertagAdapter 2019-11-02 18:40:45.650 - debug: heatingcontrol.0 no subscribe Path2PresentDP 2019-11-02 18:40:45.650 - info: heatingcontrol.0 subscribe Büro mihome.0.devices.magnet_158d0001c314f5.state 2019-11-02 18:40:45.653 - info: heatingcontrol.0 subscribe Flur EG mihome.0.devices.magnet_158d0001c0a352.state 2019-11-02 18:40:45.653 - info: heatingcontrol.0 subscribe Leer maxcube.0.devices.contact_1665a4.opened 2019-11-02 18:40:45.654 - info: heatingcontrol.0 subscribe Flur OG mihome.0.devices.magnet_158d0001b77aee.state 2019-11-02 18:40:45.654 - debug: heatingcontrol.0 #subscribtion finished 2019-11-02 18:40:45.657 - debug: heatingcontrol.0 start CalculateNextTime, profile type 2 2019-11-02 18:40:45.658 - debug: heatingcontrol.0 get profile 2019-11-02 18:40:45.674 - debug: heatingcontrol.0 profile 0 2019-11-02 18:40:45.674 - debug: heatingcontrol.0 setting Mo - Fr 2019-11-02 18:40:45.816 - debug: heatingcontrol.0 ---1 found time for Büro at {"val":"05:00","ack":true,"ts":1572375462656,"q":0,"from":"system.adapter.heatingcontrol.0","lc":1572375462656} 05:00 2019-11-02 18:40:45.817 - debug: heatingcontrol.0 push to list = 05,00 2019-11-02 18:40:45.892 - debug: heatingcontrol.0 ---1 found time for Büro at {"val":"08:00","ack":true,"ts":1572375462657,"q":0,"from":"system.adapter.heatingcontrol.0","lc":1572375462657} 08:00 2019-11-02 18:40:45.893 - debug: heatingcontrol.0 push to list = 08,00 2019-11-02 18:40:45.912 - debug: heatingcontrol.0 ---1 found time for Büro at {"val":"12:00","ack":true,"ts":1572375462661,"q":0,"from":"system.adapter.heatingcontrol.0","lc":1572375462661} 12:00 2019-11-02 18:40:45.913 - debug: heatingcontrol.0 push to list = 12,00 2019-11-02 18:40:45.925 - debug: heatingcontrol.0 ---1 found time for Büro at {"val":"16:00","ack":true,"ts":1572375462680,"q":0,"from":"system.adapter.heatingcontrol.0","lc":1572375462680} 16:00 2019-11-02 18:40:45.926 - debug: heatingcontrol.0 push to list = 16,00 2019-11-02 18:40:45.935 - debug: heatingcontrol.0 ---1 found time for Büro at {"val":"21:00","ack":true,"ts":1572375462683,"q":0,"from":"system.adapter.heatingcontrol.0","lc":1572375462683} 21:00 2019-11-02 18:40:45.935 - debug: heatingcontrol.0 push to list = 21,00 2019-11-02 18:40:45.936 - debug: heatingcontrol.0 setting Sa - Su 2019-11-02 18:40:45.945 - debug: heatingcontrol.0 ---2 found time for Büro at {"val":"04:30","ack":true,"ts":1572712355411,"q":0,"from":"system.adapter.heatingcontrol.0","lc":1572712355406} 04:30 2019-11-02 18:40:45.952 - debug: heatingcontrol.0 push to list = 04,30 2019-11-02 18:40:45.979 - debug: heatingcontrol.0 ---2 found time for Büro at {"val":"08:00","ack":true,"ts":1572375462697,"q":0,"from":"system.adapter.heatingcontrol.0","lc":1572375462697} 08:00 2019-11-02 18:40:45.979 - debug: heatingcontrol.0 push to list = 08,00 2019-11-02 18:40:46.036 - debug: heatingcontrol.0 ---2 found time for Büro at {"val":"12:00","ack":true,"ts":1572375462698,"q":0,"from":"system.adapter.heatingcontrol.0","lc":1572375462698} 12:00 2019-11-02 18:40:46.036 - debug: heatingcontrol.0 push to list = 12,00 2019-11-02 18:40:46.042 - debug: heatingcontrol.0 ---2 found time for Büro at {"val":"16:00","ack":true,"ts":1572710430466,"q":0,"from":"system.adapter.heatingcontrol.0","lc":1572375462699} 16:00 2019-11-02 18:40:46.042 - debug: heatingcontrol.0 push to list = 16,00 2019-11-02 18:40:46.045 - debug: heatingcontrol.0 ---2 found time for Büro at {"val":"21:00","ack":true,"ts":1572375462703,"q":0,"from":"system.adapter.heatingcontrol.0","lc":1572375462703} 21:00 2019-11-02 18:40:46.045 - debug: heatingcontrol.0 push to list = 21,00 2019-11-02 18:40:46.045 - debug: heatingcontrol.0 setting Mo - Fr 2019-11-02 18:40:46.049 - debug: heatingcontrol.0 ---1 found time for Flur OG at {"val":"05:00","ack":true,"ts":1572716445245,"q":0,"from":"system.adapter.heatingcontrol.0","lc":1572716445245} 05:00 2019-11-02 18:40:46.052 - debug: heatingcontrol.0 ---1 found time for Flur OG at {"val":"08:00","ack":true,"ts":1572716445255,"q":0,"from":"system.adapter.heatingcontrol.0","lc":1572716445255} 08:00 2019-11-02 18:40:46.055 - debug: heatingcontrol.0 ---1 found time for Flur OG at {"val":"12:00","ack":true,"ts":1572716445266,"q":0,"from":"system.adapter.heatingcontrol.0","lc":1572716445266} 12:00 2019-11-02 18:40:46.058 - debug: heatingcontrol.0 ---1 found time for Flur OG at {"val":"16:00","ack":true,"ts":1572716445278,"q":0,"from":"system.adapter.heatingcontrol.0","lc":1572716445278} 16:00 2019-11-02 18:40:46.061 - debug: heatingcontrol.0 ---1 found time for Flur OG at {"val":"21:00","ack":true,"ts":1572716445285,"q":0,"from":"system.adapter.heatingcontrol.0","lc":1572716445285} 21:00 2019-11-02 18:40:46.061 - debug: heatingcontrol.0 setting Sa - Su 2019-11-02 18:40:46.064 - debug: heatingcontrol.0 ---2 found time for Flur OG at {"val":"05:00","ack":true,"ts":1572716445287,"q":0,"from":"system.adapter.heatingcontrol.0","lc":1572716445287} 05:00 2019-11-02 18:40:46.065 - debug: heatingcontrol.0 push to list = 05,00 2019-11-02 18:40:46.068 - debug: heatingcontrol.0 ---2 found time for Flur OG at {"val":"08:00","ack":true,"ts":1572716445288,"q":0,"from":"system.adapter.heatingcontrol.0","lc":1572716445288} 08:00 2019-11-02 18:40:46.071 - debug: heatingcontrol.0 ---2 found time for Flur OG at {"val":"12:00","ack":true,"ts":1572716445289,"q":0,"from":"system.adapter.heatingcontrol.0","lc":1572716445289} 12:00 2019-11-02 18:40:46.074 - debug: heatingcontrol.0 ---2 found time for Flur OG at {"val":"16:00","ack":true,"ts":1572716445312,"q":0,"from":"system.adapter.heatingcontrol.0","lc":1572716445312} 16:00 2019-11-02 18:40:46.079 - debug: heatingcontrol.0 ---2 found time for Flur OG at {"val":"21:00","ack":true,"ts":1572716445324,"q":0,"from":"system.adapter.heatingcontrol.0","lc":1572716445324} 21:00 2019-11-02 18:40:46.079 - debug: heatingcontrol.0 setting Mo - Fr 2019-11-02 18:40:46.089 - debug: heatingcontrol.0 ---1 found time for Flur EG at {"val":"05:00","ack":true,"ts":1572715292758,"q":0,"from":"system.adapter.heatingcontrol.0","lc":1572715292758} 05:00 2019-11-02 18:40:46.133 - debug: heatingcontrol.0 ---1 found time for Flur EG at {"val":"08:00","ack":true,"ts":1572715292761,"q":0,"from":"system.adapter.heatingcontrol.0","lc":1572715292761} 08:00 2019-11-02 18:40:46.136 - debug: heatingcontrol.0 ---1 found time for Flur EG at {"val":"12:00","ack":true,"ts":1572715292773,"q":0,"from":"system.adapter.heatingcontrol.0","lc":1572715292773} 12:00 2019-11-02 18:40:46.138 - debug: heatingcontrol.0 ---1 found time for Flur EG at {"val":"16:00","ack":true,"ts":1572715292784,"q":0,"from":"system.adapter.heatingcontrol.0","lc":1572715292784} 16:00 2019-11-02 18:40:46.142 - debug: heatingcontrol.0 ---1 found time for Flur EG at {"val":"21:00","ack":true,"ts":1572715292788,"q":0,"from":"system.adapter.heatingcontrol.0","lc":1572715292788} 21:00 2019-11-02 18:40:46.142 - debug: heatingcontrol.0 setting Sa - Su 2019-11-02 18:40:46.145 - debug: heatingcontrol.0 ---2 found time for Flur EG at {"val":"05:00","ack":true,"ts":1572715292789,"q":0,"from":"system.adapter.heatingcontrol.0","lc":1572715292789} 05:00 2019-11-02 18:40:46.197 - debug: heatingcontrol.0 ---2 found time for Flur EG at {"val":"08:00","ack":true,"ts":1572715292790,"q":0,"from":"system.adapter.heatingcontrol.0","lc":1572715292790} 08:00 2019-11-02 18:40:46.431 - debug: heatingcontrol.0 ---2 found time for Flur EG at {"val":"12:00","ack":true,"ts":1572715292791,"q":0,"from":"system.adapter.heatingcontrol.0","lc":1572715292791} 12:00 2019-11-02 18:40:46.573 - debug: heatingcontrol.0 ---2 found time for Flur EG at {"val":"16:00","ack":true,"ts":1572715292792,"q":0,"from":"system.adapter.heatingcontrol.0","lc":1572715292792} 16:00 2019-11-02 18:40:46.595 - debug: heatingcontrol.0 ---2 found time for Flur EG at {"val":"21:00","ack":true,"ts":1572715292794,"q":0,"from":"system.adapter.heatingcontrol.0","lc":1572715292794} 21:00 2019-11-02 18:40:46.595 - debug: heatingcontrol.0 setting Mo - Fr 2019-11-02 18:40:46.610 - debug: heatingcontrol.0 ---1 found time for Leer at {"val":"05:00","ack":true,"ts":1572716243194,"q":0,"from":"system.adapter.heatingcontrol.0","lc":1572716243194} 05:00 2019-11-02 18:40:46.620 - debug: heatingcontrol.0 ---1 found time for Leer at {"val":"08:00","ack":true,"ts":1572716243202,"q":0,"from":"system.adapter.heatingcontrol.0","lc":1572716243202} 08:00 2019-11-02 18:40:46.625 - debug: heatingcontrol.0 ---1 found time for Leer at {"val":"12:00","ack":true,"ts":1572716243207,"q":0,"from":"system.adapter.heatingcontrol.0","lc":1572716243207} 12:00 2019-11-02 18:40:46.629 - debug: heatingcontrol.0 ---1 found time for Leer at {"val":"16:00","ack":true,"ts":1572716243209,"q":0,"from":"system.adapter.heatingcontrol.0","lc":1572716243209} 16:00 2019-11-02 18:40:46.633 - debug: heatingcontrol.0 ---1 found time for Leer at {"val":"21:00","ack":true,"ts":1572716243210,"q":0,"from":"system.adapter.heatingcontrol.0","lc":1572716243210} 21:00 2019-11-02 18:40:46.634 - debug: heatingcontrol.0 setting Sa - Su 2019-11-02 18:40:46.637 - debug: heatingcontrol.0 ---2 found time for Leer at {"val":"05:00","ack":true,"ts":1572716243248,"q":0,"from":"system.adapter.heatingcontrol.0","lc":1572716243248} 05:00 2019-11-02 18:40:46.641 - debug: heatingcontrol.0 ---2 found time for Leer at {"val":"08:00","ack":true,"ts":1572716243249,"q":0,"from":"system.adapter.heatingcontrol.0","lc":1572716243249} 08:00 2019-11-02 18:40:46.646 - debug: heatingcontrol.0 ---2 found time for Leer at {"val":"12:00","ack":true,"ts":1572716243250,"q":0,"from":"system.adapter.heatingcontrol.0","lc":1572716243250} 12:00 2019-11-02 18:40:46.649 - debug: heatingcontrol.0 ---2 found time for Leer at {"val":"16:00","ack":true,"ts":1572716243251,"q":0,"from":"system.adapter.heatingcontrol.0","lc":1572716243251} 16:00 2019-11-02 18:40:46.654 - debug: heatingcontrol.0 ---2 found time for Leer at {"val":"21:00","ack":true,"ts":1572716243252,"q":0,"from":"system.adapter.heatingcontrol.0","lc":1572716243252} 21:00 2019-11-02 18:40:46.656 - debug: heatingcontrol.0 create cron job #0 at 5:0 string: 0 0 5 * * 1-5 Europe/Berlin 2019-11-02 18:40:46.691 - debug: heatingcontrol.0 create cron job #1 at 8:0 string: 0 0 8 * * 1-5 Europe/Berlin 2019-11-02 18:40:46.703 - debug: heatingcontrol.0 create cron job #2 at 12:0 string: 0 0 12 * * 1-5 Europe/Berlin 2019-11-02 18:40:46.713 - debug: heatingcontrol.0 create cron job #3 at 16:0 string: 0 0 16 * * 1-5 Europe/Berlin 2019-11-02 18:40:46.720 - debug: heatingcontrol.0 create cron job #4 at 21:0 string: 0 0 21 * * 1-5 Europe/Berlin 2019-11-02 18:40:46.728 - debug: heatingcontrol.0 create cron job #5 at 4:30 string: 0 30 4 * * 0,6 Europe/Berlin 2019-11-02 18:40:46.739 - debug: heatingcontrol.0 create cron job #6 at 8:0 string: 0 0 8 * * 0,6 Europe/Berlin 2019-11-02 18:40:46.746 - debug: heatingcontrol.0 create cron job #7 at 12:0 string: 0 0 12 * * 0,6 Europe/Berlin 2019-11-02 18:40:46.753 - debug: heatingcontrol.0 create cron job #8 at 16:0 string: 0 0 16 * * 0,6 Europe/Berlin 2019-11-02 18:40:46.761 - debug: heatingcontrol.0 create cron job #9 at 21:0 string: 0 0 21 * * 0,6 Europe/Berlin 2019-11-02 18:40:46.766 - debug: heatingcontrol.0 create cron job #10 at 5:0 string: 0 0 5 * * 0,6 Europe/Berlin 2019-11-02 18:40:46.775 - debug: heatingcontrol.0 [INFO] status = true next event: 4 Nov 2019 05:00:00 2019-11-02 18:40:46.779 - debug: heatingcontrol.0 [INFO] status = true next event: 4 Nov 2019 08:00:00 2019-11-02 18:40:46.783 - debug: heatingcontrol.0 [INFO] status = true next event: 4 Nov 2019 12:00:00 2019-11-02 18:40:46.787 - debug: heatingcontrol.0 [INFO] status = true next event: 4 Nov 2019 16:00:00 2019-11-02 18:40:46.793 - debug: heatingcontrol.0 [INFO] status = true next event: 4 Nov 2019 21:00:00 2019-11-02 18:40:46.801 - debug: heatingcontrol.0 [INFO] status = true next event: 3 Nov 2019 04:30:00 2019-11-02 18:40:46.805 - debug: heatingcontrol.0 [INFO] status = true next event: 3 Nov 2019 08:00:00 2019-11-02 18:40:46.809 - debug: heatingcontrol.0 [INFO] status = true next event: 3 Nov 2019 12:00:00 2019-11-02 18:40:46.814 - debug: heatingcontrol.0 [INFO] status = true next event: 3 Nov 2019 16:00:00 2019-11-02 18:40:46.815 - debug: heatingcontrol.0 [INFO] status = true next event: 2 Nov 2019 21:00:00 2019-11-02 18:40:46.819 - debug: heatingcontrol.0 [INFO] status = true next event: 3 Nov 2019 05:00:00 2019-11-02 18:40:46.820 - debug: heatingcontrol.0 Check sensors for Büro 2019-11-02 18:40:46.823 - debug: heatingcontrol.0 got sensor state {"val":false,"ack":true,"ts":1572711961775,"q":0,"from":"system.adapter.mihome.0","lc":1572711961775} from mihome.0.devices.magnet_158d0001c314f5.state 2019-11-02 18:40:46.823 - debug: heatingcontrol.0 Check sensors for Flur OG 2019-11-02 18:40:46.825 - debug: heatingcontrol.0 got sensor state {"val":false,"ack":true,"ts":1572714248405,"q":0,"from":"system.adapter.mihome.0","lc":1572714248405} from mihome.0.devices.magnet_158d0001b77aee.state 2019-11-02 18:40:46.826 - debug: heatingcontrol.0 Check sensors for Flur EG 2019-11-02 18:40:46.838 - debug: heatingcontrol.0 got sensor state {"val":false,"ack":true,"ts":1572709544274,"q":0,"from":"system.adapter.mihome.0","lc":1572709544274} from mihome.0.devices.magnet_158d0001c0a352.state 2019-11-02 18:40:46.838 - debug: heatingcontrol.0 Check sensors for Leer 2019-11-02 18:40:46.851 - debug: heatingcontrol.0 got sensor state {"val":false,"ack":true,"ts":1570345680277,"q":0,"from":"system.adapter.maxcube.0","lc":1570345680277} from maxcube.0.devices.contact_1665a4.opened 2019-11-02 18:40:46.854 - info: heatingcontrol.0 calculating new target temperatures 2019-11-02 18:40:46.882 - debug: heatingcontrol.0 profile type 2 2019-11-02 18:40:46.883 - debug: heatingcontrol.0 get profile 2019-11-02 18:40:46.885 - debug: heatingcontrol.0 profile 0 2019-11-02 18:40:46.885 - debug: heatingcontrol.0 check room Büro 2019-11-02 18:40:46.885 - debug: heatingcontrol.0 number of periods 5 2019-11-02 18:40:46.885 - debug: heatingcontrol.0 check ID Profiles.0.Büro.Su-So.Periods.0.time 2019-11-02 18:40:46.901 - debug: heatingcontrol.0 check time for Büro Profiles.0.Büro.Su-So.Periods.0.time 19 2019-11-02 18:40:46.901 - debug: heatingcontrol.0 check ID Profiles.0.Büro.Su-So.Periods.1.time 2019-11-02 18:40:46.910 - debug: heatingcontrol.0 check time for Büro Profiles.0.Büro.Su-So.Periods.1.time 21 2019-11-02 18:40:46.910 - debug: heatingcontrol.0 check ID Profiles.0.Büro.Su-So.Periods.2.time 2019-11-02 18:40:46.917 - debug: heatingcontrol.0 check time for Büro Profiles.0.Büro.Su-So.Periods.2.time 21 2019-11-02 18:40:46.918 - debug: heatingcontrol.0 check ID Profiles.0.Büro.Su-So.Periods.3.time 2019-11-02 18:40:46.923 - debug: heatingcontrol.0 check time for Büro Profiles.0.Büro.Su-So.Periods.3.time 19 2019-11-02 18:40:46.923 - debug: heatingcontrol.0 check ID Profiles.0.Büro.Su-So.Periods.4.time 2019-11-02 18:40:46.927 - debug: heatingcontrol.0 ### 19 0 0 0 0 0 2019-11-02 18:40:46.928 - info: heatingcontrol.0 room Büro Thermostat Büro setpoint set to 19 2019-11-02 18:40:46.932 - debug: heatingcontrol.0 thermostat maxcube.0.devices.thermostat_16a13f.setpoint nothing to do, already 19 2019-11-02 18:40:46.940 - debug: heatingcontrol.0 check room Flur OG 2019-11-02 18:40:46.941 - debug: heatingcontrol.0 number of periods 5 2019-11-02 18:40:46.941 - debug: heatingcontrol.0 check ID Profiles.0.Flur OG.Su-So.Periods.0.time 2019-11-02 18:40:46.950 - debug: heatingcontrol.0 check time for Flur OG Profiles.0.Flur OG.Su-So.Periods.0.time 19 2019-11-02 18:40:46.950 - debug: heatingcontrol.0 check ID Profiles.0.Flur OG.Su-So.Periods.1.time 2019-11-02 18:40:46.958 - debug: heatingcontrol.0 check time for Flur OG Profiles.0.Flur OG.Su-So.Periods.1.time 21 2019-11-02 18:40:46.959 - debug: heatingcontrol.0 check ID Profiles.0.Flur OG.Su-So.Periods.2.time 2019-11-02 18:40:46.967 - debug: heatingcontrol.0 check time for Flur OG Profiles.0.Flur OG.Su-So.Periods.2.time 21 2019-11-02 18:40:46.967 - debug: heatingcontrol.0 check ID Profiles.0.Flur OG.Su-So.Periods.3.time 2019-11-02 18:40:46.979 - debug: heatingcontrol.0 check time for Flur OG Profiles.0.Flur OG.Su-So.Periods.3.time 19 2019-11-02 18:40:46.979 - debug: heatingcontrol.0 check ID Profiles.0.Flur OG.Su-So.Periods.4.time 2019-11-02 18:40:47.000 - debug: heatingcontrol.0 ### 19 0 0 0 0 0 2019-11-02 18:40:47.000 - info: heatingcontrol.0 room Flur OG Thermostat Thermostat 1 setpoint set to 19 2019-11-02 18:40:47.018 - debug: heatingcontrol.0 thermostat maxcube.0.devices.thermostat_1a33d9.setpoint to 19 2019-11-02 18:40:47.036 - debug: heatingcontrol.0 check room Flur EG 2019-11-02 18:40:47.037 - debug: heatingcontrol.0 number of periods 5 2019-11-02 18:40:47.037 - debug: heatingcontrol.0 check ID Profiles.0.Flur EG.Su-So.Periods.0.time 2019-11-02 18:40:47.047 - debug: heatingcontrol.0 check time for Flur EG Profiles.0.Flur EG.Su-So.Periods.0.time 16 2019-11-02 18:40:47.047 - debug: heatingcontrol.0 check ID Profiles.0.Flur EG.Su-So.Periods.1.time 2019-11-02 18:40:47.059 - debug: heatingcontrol.0 check time for Flur EG Profiles.0.Flur EG.Su-So.Periods.1.time 16 2019-11-02 18:40:47.059 - debug: heatingcontrol.0 check ID Profiles.0.Flur EG.Su-So.Periods.2.time 2019-11-02 18:40:47.069 - debug: heatingcontrol.0 check time for Flur EG Profiles.0.Flur EG.Su-So.Periods.2.time 16 2019-11-02 18:40:47.070 - debug: heatingcontrol.0 check ID Profiles.0.Flur EG.Su-So.Periods.3.time 2019-11-02 18:40:47.077 - debug: heatingcontrol.0 check time for Flur EG Profiles.0.Flur EG.Su-So.Periods.3.time 16 2019-11-02 18:40:47.078 - debug: heatingcontrol.0 check ID Profiles.0.Flur EG.Su-So.Periods.4.time 2019-11-02 18:40:47.080 - debug: heatingcontrol.0 ### 16 0 0 0 0 0 2019-11-02 18:40:47.080 - info: heatingcontrol.0 room Flur EG Thermostat Thermostat Flur EG setpoint set to 16 2019-11-02 18:40:47.087 - debug: heatingcontrol.0 thermostat maxcube.0.devices.thermostat_196b47.setpoint nothing to do, already 16 2019-11-02 18:40:47.096 - debug: heatingcontrol.0 check room Leer 2019-11-02 18:40:47.096 - debug: heatingcontrol.0 number of periods 5 2019-11-02 18:40:47.096 - debug: heatingcontrol.0 check ID Profiles.0.Leer.Su-So.Periods.0.time 2019-11-02 18:40:47.105 - debug: heatingcontrol.0 check time for Leer Profiles.0.Leer.Su-So.Periods.0.time 19 2019-11-02 18:40:47.105 - debug: heatingcontrol.0 check ID Profiles.0.Leer.Su-So.Periods.1.time 2019-11-02 18:40:47.114 - debug: heatingcontrol.0 check time for Leer Profiles.0.Leer.Su-So.Periods.1.time 21 2019-11-02 18:40:47.114 - debug: heatingcontrol.0 check ID Profiles.0.Leer.Su-So.Periods.2.time 2019-11-02 18:40:47.121 - debug: heatingcontrol.0 check time for Leer Profiles.0.Leer.Su-So.Periods.2.time 21 2019-11-02 18:40:47.121 - debug: heatingcontrol.0 check ID Profiles.0.Leer.Su-So.Periods.3.time 2019-11-02 18:40:47.129 - debug: heatingcontrol.0 check time for Leer Profiles.0.Leer.Su-So.Periods.3.time 19 2019-11-02 18:40:47.129 - debug: heatingcontrol.0 check ID Profiles.0.Leer.Su-So.Periods.4.time 2019-11-02 18:40:47.134 - debug: heatingcontrol.0 ### 19 0 0 0 0 0 2019-11-02 18:40:47.135 - info: heatingcontrol.0 room Leer Thermostat Thermostat Hannah setpoint set to 19 2019-11-02 18:40:47.152 - debug: heatingcontrol.0 thermostat maxcube.0.devices.thermostat_1a33ea.setpoint to 19 2019-11-02 18:40:47.166 - debug: heatingcontrol.0 [INFO] status = true next event: 4 Nov 2019 05:00:00 2019-11-02 18:40:47.169 - debug: heatingcontrol.0 [INFO] status = true next event: 4 Nov 2019 08:00:00 2019-11-02 18:40:47.172 - debug: heatingcontrol.0 [INFO] status = true next event: 4 Nov 2019 12:00:00 2019-11-02 18:40:47.180 - debug: heatingcontrol.0 [INFO] status = true next event: 4 Nov 2019 16:00:00 2019-11-02 18:40:47.193 - debug: heatingcontrol.0 [INFO] status = true next event: 4 Nov 2019 21:00:00 2019-11-02 18:40:47.200 - debug: heatingcontrol.0 [INFO] status = true next event: 3 Nov 2019 04:30:00 2019-11-02 18:40:47.203 - debug: heatingcontrol.0 [INFO] status = true next event: 3 Nov 2019 08:00:00 2019-11-02 18:40:47.207 - debug: heatingcontrol.0 [INFO] status = true next event: 3 Nov 2019 12:00:00 2019-11-02 18:40:47.211 - debug: heatingcontrol.0 [INFO] status = true next event: 3 Nov 2019 16:00:00 2019-11-02 18:40:47.213 - debug: heatingcontrol.0 [INFO] status = true next event: 2 Nov 2019 21:00:00 2019-11-02 18:40:47.216 - debug: heatingcontrol.0 [INFO] status = true next event: 3 Nov 2019 05:00:00 2019-11-02 18:41:15.819 - debug: heatingcontrol.0 system.adapter.admin.0: logging false 2019-11-02 18:41:27.636 - debug: heatingcontrol.0 system.adapter.admin.0: logging true -
Hallo Rene,
vielen Dank für diesen tollen Adapter!
Ich würde mir einen zusätzlichen Datenpunkt "MinimalTemperatur" wünschen, gerne global:
Zur Zeit kann ich nur Temperaturbeträge angeben, um die bei Abwesenheit/Urlaub abgesenkt wird.
Ich fahre unterschiedliche Temperaturen über den Tag verteilt. Diese Staffelung bleibt bei einer Absenkung um einen fixen Betrag erhalten, was für eine generelle Absenkung auf z.B. 18° im Urlaub/Ferienwohnung nicht gewünscht ist.
Gäbe es nun eine MinimalTemperatur von z.B. 18°, könnte ich die Absenkung für den Urlaubszeitraum dann z.B auf 10° einstellen. Wegen der Unterschwelle von 18° würden alle gestaffelten Temperaturen auf diesen gleichen Wert abgesenkt.Ich hoffe, meine Vorstellung verständlich formuliert zu haben.
Andernfalls bitte nachfragen!Ulrich
-
@AhleWurscht75 das schau ich mir an. Bin sowieso gerade an dem Thema https://github.com/rg-engineering/ioBroker.heatingcontrol/issues/26
-
@zahnheinrich Danke für die Idee. Kannst du bitte dafür ein issue in github anlegen?
-
erledigt!
-
@Rene_HM sagte in Test Adapter HeatingControl v0.3.x:
@MyMeyer sagte in Test Adapter HeatingControl v0.3.x:
heatingcontrol.0.LastProgramRun ==>> 2019-10-27 4:51:59 PM
Hast Du zu dem Time Problem noch ein Tip für mich ?
Ich nutze das DateTime-Format vom System (toLocaleString). Dein System sollte also auf deutsch umgestellt werden, damit du eine deutsche Datums-Anzeige bekommst...
Hi zusammen, könnt Ihr mir einen Tip zu dem Thema geben , denn ich finde die Stelle nicht wo man das einstellen könnt.
Mein IoBroker läuft unter Debian 9.9 Stretch mit Proxmox.
Vielleicht kennt Ihr die Einstellung. Bei Google habe ich zu dem Thema auch nichts gefunden (vielleicht auch übersehen.
)Ich habe auch nur das Problem bei "Heating" alle anderen Adapter und Logs sind korrekt.
-
@Rene_HM irgendwas will bei mir nicht. Was mache ich denn falsch?
heatingcontrol.0 2019-11-03 00:31:30.594 debug (3322) ### all StateChange handled heatingcontrol.0 2019-11-03 00:31:30.593 debug (3322) ### 111 handled heatingcontrol.0 2019-11-03 00:31:30.593 debug (3322) [INFO] status = true next event: 21 Nov 2019 03:00:00 heatingcontrol.0 2019-11-03 00:31:30.589 debug (3322) [INFO] status = true next event: 23 Nov 2019 01:00:00 heatingcontrol.0 2019-11-03 00:31:30.588 debug (3322) [INFO] status = true next event: 22 Nov 2019 00:00:00 heatingcontrol.0 2019-11-03 00:31:30.586 debug (3322) [INFO] status = true next event: 6 Nov 2019 23:00:00 heatingcontrol.0 2019-11-03 00:31:30.584 debug (3322) check ID Profiles.0.Wohnung.Sun.Periods.3.time heatingcontrol.0 2019-11-03 00:31:30.581 debug (3322) check ID Profiles.0.Wohnung.Sun.Periods.2.time heatingcontrol.0 2019-11-03 00:31:30.579 debug (3322) check ID Profiles.0.Wohnung.Sun.Periods.1.time heatingcontrol.0 2019-11-03 00:31:30.578 debug (3322) check ID Profiles.0.Wohnung.Sun.Periods.0.time heatingcontrol.0 2019-11-03 00:31:30.578 debug (3322) number of periods 4 heatingcontrol.0 2019-11-03 00:31:30.578 debug (3322) AbsentDecrease {"val":0.5,"ack":true,"ts":1572714343336,"q":0,"from":"system.adapter.heatingcontrol.0","user":"system.user.admin","lc":1572714343333} heatingcontrol.0 2019-11-03 00:31:30.576 debug (3322) check room Wohnung heatingcontrol.0 2019-11-03 00:31:30.576 debug (3322) profile 0 heatingcontrol.0 2019-11-03 00:31:30.575 debug (3322) get profile heatingcontrol.0 2019-11-03 00:31:30.575 debug (3322) profile type 3 heatingcontrol.0 2019-11-03 00:31:30.556 info (3322) calculating new target temperatures heatingcontrol.0 2019-11-03 00:31:30.555 debug (3322) [INFO] status = true next event: 21 Nov 2019 03:00:00 heatingcontrol.0 2019-11-03 00:31:30.554 debug (3322) [INFO] status = true next event: 23 Nov 2019 01:00:00 heatingcontrol.0 2019-11-03 00:31:30.553 debug (3322) [INFO] status = true next event: 22 Nov 2019 00:00:00 heatingcontrol.0 2019-11-03 00:31:30.552 debug (3322) [INFO] status = true next event: 6 Nov 2019 23:00:00 heatingcontrol.0 2019-11-03 00:31:30.548 debug (3322) create cron job #3 at 21:3 string: 0 3 21 * * Europe/Berlin heatingcontrol.0 2019-11-03 00:31:30.546 debug (3322) create cron job #2 at 23:1 string: 0 1 23 * * Europe/Berlin heatingcontrol.0 2019-11-03 00:31:30.544 debug (3322) create cron job #1 at 22:0 string: 0 0 22 * * Europe/Berlin heatingcontrol.0 2019-11-03 00:31:30.539 debug (3322) create cron job #0 at 6:35 string: 0 35 6 * * Europe/Berlin heatingcontrol.0 2019-11-03 00:31:30.539 debug (3322) push to list = 21,03 heatingcontrol.0 2019-11-03 00:31:30.539 debug (3322) ---found time for Wohnung at {"val":"21:03","ack":true,"ts":1572737490531,"q":0,"from":"system.adapter.heatingcontrol.0","user":"system.user.admin","lc":1572737490526} 21:03 heatingcontrol.0 2019-11-03 00:31:30.538 debug (3322) push to list = 23,01 heatingcontrol.0 2019-11-03 00:31:30.538 debug (3322) ---found time for Wohnung at {"val":"23:01","ack":true,"ts":1572737483598,"q":0,"from":"system.adapter.heatingcontrol.0","user":"system.user.admin","lc":1572737483595} 23:01 heatingcontrol.0 2019-11-03 00:31:30.537 debug (3322) push to list = 22,00 heatingcontrol.0 2019-11-03 00:31:30.536 debug (3322) ---found time for Wohnung at {"val":"22:00","ack":true,"ts":1572737419828,"q":0,"from":"system.adapter.heatingcontrol.0","user":"system.user.admin","lc":1572713954207} 22:00 heatingcontrol.0 2019-11-03 00:31:30.536 debug (3322) push to list = 06,35 heatingcontrol.0 2019-11-03 00:31:30.535 debug (3322) ---found time for Wohnung at {"val":"06:35","ack":true,"ts":1572737109537,"q":0,"from":"system.adapter.heatingcontrol.0","user":"system.user.admin","lc":1572737109533} 06:35 heatingcontrol.0 2019-11-03 00:31:30.535 debug (3322) ### state change already handled: 21:03 / 21:03 /// heatingcontrol.0.Profiles.0.Wohnung.Sun.Periods.3.time / heatingcontrol.0.Profiles.0.Wohnung.Sun.Periods.3.time heatingcontrol.0 2019-11-03 00:31:30.535 debug (3322) ### handle state change heatingcontrol.0.Profiles.0.Wohnung.Sun.Periods.3.time {"val":"21:03","ack":true,"ts":1572737490531,"q":0,"from":"system.adapter.heatingcontrol.0","user":"system.user.a heatingcontrol.0 2019-11-03 00:31:30.534 debug (3322) setting Sun heatingcontrol.0 2019-11-03 00:31:30.534 debug (3322) profile 0 heatingcontrol.0 2019-11-03 00:31:30.533 debug (3322) get profile heatingcontrol.0 2019-11-03 00:31:30.533 debug (3322) cron job stopped heatingcontrol.0 2019-11-03 00:31:30.532 debug (3322) cron job stopped heatingcontrol.0 2019-11-03 00:31:30.532 debug (3322) cron job stopped heatingcontrol.0 2019-11-03 00:31:30.532 debug (3322) cron job stopped heatingcontrol.0 2019-11-03 00:31:30.532 debug (3322) delete 4 cron jobs heatingcontrol.0 2019-11-03 00:31:30.531 debug (3322) start CalculateNextTime, profile type 3 heatingcontrol.0 2019-11-03 00:31:30.530 debug (3322) ### state change already handled: 21:03 / 21:03 /// heatingcontrol.0.Profiles.0.Wohnung.Sun.Periods.3.time / heatingcontrol.0.Profiles.0.Wohnung.Sun.Periods.3.time heatingcontrol.0 2019-11-03 00:31:30.530 debug (3322) ### handle state change heatingcontrol.0.Profiles.0.Wohnung.Sun.Periods.3.time {"val":"21:03","ack":true,"ts":1572737490528,"q":0,"from":"system.adapter.heatingcontrol.0","user":"system.user.a heatingcontrol.0 2019-11-03 00:31:30.529 debug (3322) ### heatingcontrol.0.Profiles.0.Wohnung.Sun.Periods.3.time heatingcontrol.0.Profiles.0.Wohnung.Sun.Periods.2.time 21:03 23:01 heatingcontrol.0 2019-11-03 00:31:30.528 debug (3322) ### handle state change heatingcontrol.0.Profiles.0.Wohnung.Sun.Periods.3.time {"val":"21:03","ack":false,"ts":1572737490526,"q":0,"from":"system.adapter.admin.0","user":"system.user.admin","l heatingcontrol.0 2019-11-03 00:31:23.649 debug (3322) ### all StateChange handled heatingcontrol.0 2019-11-03 00:31:23.649 debug (3322) ### 111 handled heatingcontrol.0 2019-11-03 00:31:23.649 debug (3322) [INFO] status = true next event: 22 Nov 2019 03:00:00 heatingcontrol.0 2019-11-03 00:31:23.648 debug (3322) [INFO] status = true next event: 23 Nov 2019 01:00:00 heatingcontrol.0 2019-11-03 00:31:23.646 debug (3322) [INFO] status = true next event: 22 Nov 2019 00:00:00 heatingcontrol.0 2019-11-03 00:31:23.645 debug (3322) [INFO] status = true next event: 6 Nov 2019 23:00:00 heatingcontrol.0 2019-11-03 00:31:23.641 debug (3322) check ID Profiles.0.Wohnung.Sun.Periods.3.time heatingcontrol.0 2019-11-03 00:31:23.639 debug (3322) check ID Profiles.0.Wohnung.Sun.Periods.2.time heatingcontrol.0 2019-11-03 00:31:23.638 debug (3322) check ID Profiles.0.Wohnung.Sun.Periods.1.time heatingcontrol.0 2019-11-03 00:31:23.635 debug (3322) check ID Profiles.0.Wohnung.Sun.Periods.0.time heatingcontrol.0 2019-11-03 00:31:23.634 debug (3322) number of periods 4 heatingcontrol.0 2019-11-03 00:31:23.634 debug (3322) AbsentDecrease {"val":0.5,"ack":true,"ts":1572714343336,"q":0,"from":"system.adapter.heatingcontrol.0","user":"system.user.admin","lc":1572714343333} heatingcontrol.0 2019-11-03 00:31:23.632 debug (3322) check room Wohnung heatingcontrol.0 2019-11-03 00:31:23.631 debug (3322) profile 0 heatingcontrol.0 2019-11-03 00:31:23.631 debug (3322) get profile heatingcontrol.0 2019-11-03 00:31:23.630 debug (3322) profile type 3 heatingcontrol.0 2019-11-03 00:31:23.625 info (3322) calculating new target temperatures heatingcontrol.0 2019-11-03 00:31:23.625 debug (3322) [INFO] status = true next event: 22 Nov 2019 03:00:00 heatingcontrol.0 2019-11-03 00:31:23.622 debug (3322) [INFO] status = true next event: 23 Nov 2019 01:00:00 heatingcontrol.0 2019-11-03 00:31:23.622 debug (3322) [INFO] status = true next event: 22 Nov 2019 00:00:00 heatingcontrol.0 2019-11-03 00:31:23.621 debug (3322) [INFO] status = true next event: 6 Nov 2019 23:00:00 heatingcontrol.0 2019-11-03 00:31:23.617 debug (3322) create cron job #3 at 22:3 string: 0 3 22 * * Europe/Berlin heatingcontrol.0 2019-11-03 00:31:23.615 debug (3322) create cron job #2 at 23:1 string: 0 1 23 * * Europe/Berlin heatingcontrol.0 2019-11-03 00:31:23.613 debug (3322) create cron job #1 at 22:0 string: 0 0 22 * * Europe/Berlin heatingcontrol.0 2019-11-03 00:31:23.611 debug (3322) create cron job #0 at 6:35 string: 0 35 6 * * Europe/Berlin heatingcontrol.0 2019-11-03 00:31:23.610 debug (3322) push to list = 22,03 heatingcontrol.0 2019-11-03 00:31:23.610 debug (3322) ---found time for Wohnung at {"val":"22:03","ack":true,"ts":1572737431286,"q":0,"from":"system.adapter.heatingcontrol.0","user":"system.user.admin","lc":1572737431279} 22:03 heatingcontrol.0 2019-11-03 00:31:23.609 debug (3322) push to list = 23,01 heatingcontrol.0 2019-11-03 00:31:23.609 debug (3322) ---found time for Wohnung at {"val":"23:01","ack":true,"ts":1572737483598,"q":0,"from":"system.adapter.heatingcontrol.0","user":"system.user.admin","lc":1572737483595} 23:01 heatingcontrol.0 2019-11-03 00:31:23.608 debug (3322) push to list = 22,00 heatingcontrol.0 2019-11-03 00:31:23.607 debug (3322) ---found time for Wohnung at {"val":"22:00","ack":true,"ts":1572737419828,"q":0,"from":"system.adapter.heatingcontrol.0","user":"system.user.admin","lc":1572713954207} 22:00 heatingcontrol.0 2019-11-03 00:31:23.606 debug (3322) push to list = 06,35 heatingcontrol.0 2019-11-03 00:31:23.606 debug (3322) ---found time for Wohnung at {"val":"06:35","ack":true,"ts":1572737109537,"q":0,"from":"system.adapter.heatingcontrol.0","user":"system.user.admin","lc":1572737109533} 06:35 heatingcontrol.0 2019-11-03 00:31:23.605 debug (3322) ### state change already handled: 23:01 / 23:01 /// heatingcontrol.0.Profiles.0.Wohnung.Sun.Periods.2.time / heatingcontrol.0.Profiles.0.Wohnung.Sun.Periods.2.time heatingcontrol.0 2019-11-03 00:31:23.605 debug (3322) ### handle state change heatingcontrol.0.Profiles.0.Wohnung.Sun.Periods.2.time {"val":"23:01","ack":true,"ts":1572737483598,"q":0,"from":"system.adapter.heatingcontrol.0","user":"system.user.a heatingcontrol.0 2019-11-03 00:31:23.604 debug (3322) setting Sun heatingcontrol.0 2019-11-03 00:31:23.604 debug (3322) profile 0 heatingcontrol.0 2019-11-03 00:31:23.601 debug (3322) get profile heatingcontrol.0 2019-11-03 00:31:23.601 debug (3322) cron job stopped heatingcontrol.0 2019-11-03 00:31:23.601 debug (3322) cron job stopped heatingcontrol.0 2019-11-03 00:31:23.600 debug (3322) cron job stopped heatingcontrol.0 2019-11-03 00:31:23.600 debug (3322) cron job stoppedWarum steht da bei Info: z.B next event: 23 Nov 2019 01:00:00 ??
Hier die Konfig, habe da mal zum Test andere Uhrzeiten eingegeben, da er wie im Bild immer noch bei Periode 0 steht, aber warum? Es ändert sich einfach nix.
-
@coyote Das muss ich mir mal genauer anschauen, komme nur heute leider nicht dazu, ich befürchte hier noch einen Fehler. Kannst du in der Zwischenzeit auf Profiltype 1 oder 2 umschalten?
-
@Rene_HM ja ok, kann ich mal probieren.
Nochmal vom Prinzip her, wenn ich doch folgende Perioden einstelle:Periode 0: von 06:30 - 22.5 Grad
Periode 1: von 07:00 - 21 Grad
Periode 2: von 13:00 - 22.5 Grad
Periode 3: von 22:00 - 21 GradSollte doch so funktionieren oder? Oder auch:
Periode 0: von 06:30 - 22.5 Grad
Periode 1: von 22:00 - 21 Grad
Periode 2: von 00:00 - 20 Grad
Periode 3: von 00:00 - 20 GradHeute morgen stand es immer noch auf Periode 3 um 9 Uhr? Mache ich da was falsch? Oder liegt es evtl an dem Fehler den du vermutest und es mit dem Profil 1 funktioniert?
-
@coyote Das erste Beispiel geht auf jeden Fall. Das zweite Beispiel geht nur mit Profiltype 1. Bei 2 und 3 hatte ich noch einen Fehler, den bug fix habe ich aber noch nicht veröffentlicht, weil ich an einer anderen Baustelle dran bin, und dort noch nicht fertig bin. Hier würde ich aktuell einstellen:
Periode 0: von 01:00 - 20 Grad
Periode 1: von 06:30 - 22.5 Grad
Periode 2: von 22:00 - 21 Grad
Periode 3: von 23:58 - 20 Grad
