Test Adapter HeatingControl v2.12.x

[martinschm]

@Rene_HM said in Test Adapter HeatingControl v0.3.x:

@martinschm du meinst so etwas

handle actors Kinderschlafzimmer current 21.7 target 16

Das wird durch Temperatur-Meldungen getriggert, und das ist die Prüfung, ob das Ventil geschaltet werden muss. Das setzt keine Temperatur. Du hast UseActors an, damit schaltest du Ventile direkt. Wenn du das nicht brauchst (weil deine Thermostate das Ventil schon schalten) dann schalte UseActors aus. Wenn du es aber brauchst, muss der Adapter regelmässig prüfen, ob das Ventil ein oder ausgeschalten werden muss.
Zeige mal deine Konfiguration der Geräte für einen Raum..

Hi,

ja hab Verwende Sensoren & Aktoren aktiv. Glaub weil ich dachte das die Ventile die Aktoren sind.

Konfig im Raum sieht so aus

Bei den Aktoren hatte ich bis grade noch ein Gerät drin stehen. Vermutlich hatte ich da fälschlicherweise das Ventil eingetragen. Sieht jetzt so aus:

Jetzt ist auch die Fehlermeldung weg. Was sind denn dann die Aktoren im Kontext dieses Adapters ? Oder unterscheidet man nur wenn man Ventile und Wandthermostate getrennt hat ?

[Rene_HM]

@martinschm Typischerweise gehören in die Sensoren-Liste die Fenster-Sensoren hinein... Was sind das bei dir für Sensoren?

[Rene_HM]

@martinschm sagte in Test Adapter HeatingControl v0.3.x:

Was sind denn dann die Aktoren im Kontext dieses Adapters ? Oder unterscheidet man nur wenn man Ventile und Wandthermostate getrennt hat ?

Aktoren sind typischerweise Ventile, die nicht direkt vom Thermostat geschaltet werden. Beim Heizkörperthermostat wird das Ventil direkt geschaltet, beim Wandthermostat mit Direktverknüpfung wird das Ventil ebenfalls direkt geschaltet. In diesen Fällen bleibt die Aktoren-Liste leer.

[martinschm]

@Rene_HM said in Test Adapter HeatingControl v0.3.x:

@martinschm Typischerweise gehören in die Sensoren-Liste die Fenster-Sensoren hinein... Was sind das bei dir für Sensoren?

Das sind Xiaomi Fenstersensoren.

[martinschm]

@Rene_HM said in Test Adapter HeatingControl v0.3.x:

@martinschm sagte in Test Adapter HeatingControl v0.3.x:

Was sind denn dann die Aktoren im Kontext dieses Adapters ? Oder unterscheidet man nur wenn man Ventile und Wandthermostate getrennt hat ?

Aktoren sind typischerweise Ventile, die nicht direkt vom Thermostat geschaltet werden. Beim Heizkörperthermostat wird das Ventil direkt geschaltet, beim Wandthermostat mit Direktverknüpfung wird das Ventil ebenfalls direkt geschaltet. In diesen Fällen bleibt die Aktoren-Liste leer.

Hab Heizungsthermostate von Homematic.

[Rene_HM]

@martinschm Dafür brauchst du keine Aktoren zu konfigurieren...

[Gsiberger]

@Rene_HM
Gestern ca. 23:00 Uhr noch Update auf 0.3.10 eingespielt.
Seit dem:

2019-12-26 23:06:43.506 - error: heatingcontrol.0 (28745) exception in CheckTemperatureChange [ReferenceError: PublicHolidyToday is not defined]

Es werden seit dem keine Perioden mehr gewechselt


Die Bilder stammen von jetzt, gestern war noch HolidayPresent = True, jetzt aber false
Auch Fensteröffnungen haben keine Auswirkungen auf die Temperaturvorgabe

019-12-27 08:08:10.968 - info: heatingcontrol.0 (25866) calculating new target temperatures
2019-12-27 08:08:10.969 - debug: heatingcontrol.0 (25866) ### state change already handled: false / false /// heatingcontrol.0.HolidayPresent / heatingcontrol.0.HolidayPresent
2019-12-27 08:08:11.039 - debug: heatingcontrol.0 (25866) profile type 2
2019-12-27 08:08:11.039 - debug: heatingcontrol.0 (25866) get profile
2019-12-27 08:08:11.040 - debug: heatingcontrol.0 (25866) profile 0
2019-12-27 08:08:11.040 - debug: heatingcontrol.0 (25866) check room EG Schlafzimmer
2019-12-27 08:08:11.041 - debug: heatingcontrol.0 (25866) FindNextPeriod for 2019-12-27 8:08:10 AM in EG Schlafzimmer
2019-12-27 08:08:11.041 - error: heatingcontrol.0 (25866) exception in CheckTemperatureChange [ReferenceError: PublicHolidyToday is not defined]
2019-12-27 08:08:11.041 - debug: heatingcontrol.0 (25866) ### 111 handled
2019-12-27 08:08:11.042 - debug: heatingcontrol.0 (25866) ### all StateChange handled
2019-12-27 08:08:27.175 - debug: heatingcontrol.0 (25866) system.adapter.admin.0: logging true
2019-12-27 08:12:52.114 - info: info.0 (1474) Popup news was read...
2019-12-27 08:13:58.750 - debug: heatingcontrol.0 (25866) system.adapter.admin.0: logging false
2019-12-27 08:15:00.062 - debug: heatingcontrol.0 (25866) ### handle state change linkeddevices.0.aaTest.Fenster_offen {"val":false,"ack":true,"ts":1577430900059,"q":0,"from":"system.adapter.javascript.0","user":"system.user.admin","lc":1577430900059}
2019-12-27 08:15:00.063 - debug: heatingcontrol.0 (25866) ### linkeddevices.0.aaTest.Fenster_offen heatingcontrol.0.HolidayPresent false false
2019-12-27 08:15:00.063 - debug: heatingcontrol.0 (25866) ### 111 not handled yet
2019-12-27 08:15:00.064 - debug: heatingcontrol.0 (25866) handle id linkeddevices.0.aaTest.Fenster_offen state {"val":false,"ack":true,"ts":1577430900059,"q":0,"from":"system.adapter.javascript.0","user":"system.user.admin","lc":1577430900059}
2019-12-27 08:15:00.064 - debug: heatingcontrol.0 (25866) ### handle devices [{"id":9,"name":"Fenster offen","OID_Current":"linkeddevices.0.aaTest.Fenster_offen","isActive":true,"type":3,"room":"aTEST"}]
2019-12-27 08:15:00.064 - debug: heatingcontrol.0 (25866) Check sensors for aTEST
2019-12-27 08:15:00.065 - debug: heatingcontrol.0 (25866) got sensor state {"val":false,"ack":true,"ts":1577430900059,"q":0,"from":"system.adapter.javascript.0","user":"system.user.admin","lc":1577430900059} from linkeddevices.0.aaTest.Fenster_offen
2019-12-27 08:15:00.071 - debug: heatingcontrol.0 (25866) room to check is aTEST
2019-12-27 08:15:00.072 - info: heatingcontrol.0 (25866) calculating new target temperatures
2019-12-27 08:15:00.072 - debug: heatingcontrol.0 (25866) ### 222 not handled yet
2019-12-27 08:15:00.073 - debug: heatingcontrol.0 (25866) ### not handled linkeddevices.0.aaTest.Fenster_offen {"val":false,"ack":true,"ts":1577430900059,"q":0,"from":"system.adapter.javascript.0","user":"system.user.admin","lc":1577430900059}
2019-12-27 08:15:00.123 - debug: heatingcontrol.0 (25866) profile type 2
2019-12-27 08:15:00.123 - debug: heatingcontrol.0 (25866) get profile
2019-12-27 08:15:00.124 - debug: heatingcontrol.0 (25866) profile 0
2019-12-27 08:15:00.125 - debug: heatingcontrol.0 (25866) check room aTEST
2019-12-27 08:15:00.125 - debug: heatingcontrol.0 (25866) FindNextPeriod for 2019-12-27 8:15:00 AM in aTEST
2019-12-27 08:15:00.126 - error: heatingcontrol.0 (25866) exception in CheckTemperatureChange [ReferenceError: PublicHolidyToday is not defined]
2019-12-27 08:19:50.096 - debug: heatingcontrol.0 (25866) system.adapter.admin.0: logging true
2019-12-27 08:20:21.446 - debug: heatingcontrol.0 (25866) ### handle state change linkeddevices.0.EG_Schlafzimmer.open {"val":true,"ack":true,"ts":1577431221443,"q":0,"from":"system.adapter.linkeddevices.0","user":"system.user.admin","lc":1577431221443}
2019-12-27 08:20:21.447 - debug: heatingcontrol.0 (25866) ### linkeddevices.0.EG_Schlafzimmer.open linkeddevices.0.aaTest.Fenster_offen true false
2019-12-27 08:20:21.447 - debug: heatingcontrol.0 (25866) ### 111 not handled yet
2019-12-27 08:20:21.448 - debug: heatingcontrol.0 (25866) handle id linkeddevices.0.EG_Schlafzimmer.open state {"val":true,"ack":true,"ts":1577431221443,"q":0,"from":"system.adapter.linkeddevices.0","user":"system.user.admin","lc":1577431221443}
2019-12-27 08:20:21.448 - debug: heatingcontrol.0 (25866) ### handle devices [{"id":2,"name":"EG Schlafzimmer TFK Süd Fenster offen","OID_Current":"linkeddevices.0.EG_Schlafzimmer.open","isActive":true,"type":3,"room":"EG Schlafzimmer"}]
2019-12-27 08:20:21.448 - debug: heatingcontrol.0 (25866) Check sensors for EG Schlafzimmer
2019-12-27 08:20:21.495 - debug: heatingcontrol.0 (25866) got sensor state {"val":true,"ack":true,"ts":1577431221443,"q":0,"from":"system.adapter.linkeddevices.0","user":"system.user.admin","lc":1577431221443} from linkeddevices.0.EG_Schlafzimmer.open
2019-12-27 08:20:21.495 - info: heatingcontrol.0 (25866) EG Schlafzimmer window open on EG Schlafzimmer TFK Süd Fenster offen
2019-12-27 08:20:21.542 - debug: heatingcontrol.0 (25866) sensor delay 30000
2019-12-27 08:20:21.543 - debug: heatingcontrol.0 (25866) ### 222 not handled yet
2019-12-27 08:20:21.543 - debug: heatingcontrol.0 (25866) ### not handled linkeddevices.0.EG_Schlafzimmer.open {"val":true,"ack":true,"ts":1577431221443,"q":0,"from":"system.adapter.linkeddevices.0","user":"system.user.admin","lc":1577431221443}
2019-12-27 08:20:51.544 - debug: heatingcontrol.0 (25866) room to check is EG Schlafzimmer
2019-12-27 08:20:51.545 - info: heatingcontrol.0 (25866) calculating new target temperatures
2019-12-27 08:20:51.601 - debug: heatingcontrol.0 (25866) profile type 2
2019-12-27 08:20:51.601 - debug: heatingcontrol.0 (25866) get profile
2019-12-27 08:20:51.602 - debug: heatingcontrol.0 (25866) profile 0
2019-12-27 08:20:51.603 - debug: heatingcontrol.0 (25866) check room EG Schlafzimmer
2019-12-27 08:20:51.606 - debug: heatingcontrol.0 (25866) WindowOpenDecrease {"val":12,"ack":true,"ts":1575095161397,"q":0,"from":"system.adapter.heatingcontrol.0","user":"system.user.admin","lc":1575095161378}
2019-12-27 08:20:51.607 - debug: heatingcontrol.0 (25866) FindNextPeriod for 2019-12-27 8:20:51 AM in EG Schlafzimmer
2019-12-27 08:20:51.607 - error: heatingcontrol.0 (25866) exception in CheckTemperatureChange [ReferenceError: PublicHolidyToday is not defined]

Hoffe genügend Infos geliefert zu haben. Muss jetzt auf Arbeit und kann ansonsten erst am späteren Nachmittag weitere Daten liefern.

[Rene_HM]

@Gsiberger sagte in Test Adapter HeatingControl v0.3.x:

PublicHolidyToday

Ich schau mir das an, sollte an Infos genügen. Danke.

edit:
Version 0.3.11 behebt das Problem...

[Gsiberger]

@Rene_HM

[Chaot]

@Rene_HM Ich habe seit dem letzten Update eine Fehlermeldung drin:

heatingcontrol.0	2019-12-27 19:14:34.281	error	(9306) exception in CheckTemperatureChange [ReferenceError: RoomState is not defined]

Dann habe ich (aber schon länger) nocht zeitweise diese Meldung:

2019-12-27 19:00:48.405 - warn: heatingcontrol.0 (32760) try to convert 24,0
to a number

Debug Log:

Spoiler

heatingcontrol.0	2019-12-27 19:14:34.300	debug	(9306) #subscribtion finished
heatingcontrol.0	2019-12-27 19:14:34.296	info	(9306) subscribe Wohnzimmer sonoff.0.Umweltsensor.POWER
heatingcontrol.0	2019-12-27 19:14:34.295	debug	(9306) device not active
heatingcontrol.0	2019-12-27 19:14:34.295	debug	(9306) no subscribe Path2PartyNowDP
heatingcontrol.0	2019-12-27 19:14:34.294	debug	(9306) no subscribe Path2GuestsPresentDP
heatingcontrol.0	2019-12-27 19:14:34.294	info	(9306) subscribe 0_userdata.0.UrlaubZuHause
heatingcontrol.0	2019-12-27 19:14:34.291	info	(9306) subscribe 0_userdata.0.UrlaubAbwesend
heatingcontrol.0	2019-12-27 19:14:34.289	debug	(9306) no subscribe Path2PresentDP
heatingcontrol.0	2019-12-27 19:14:34.289	info	(9306) subscribe feiertage.0.heute.boolean
heatingcontrol.0	2019-12-27 19:14:34.283	debug	(9306) #start subscribtion
heatingcontrol.0	2019-12-27 19:14:34.281	error	(9306) exception in CheckTemperatureChange [ReferenceError: RoomState is not defined]
heatingcontrol.0	2019-12-27 19:14:34.280	debug	(9306) FindNextPeriod for 12/27/2019, 7:14:34 PM in Wohnzimmer
heatingcontrol.0	2019-12-27 19:14:34.271	debug	(9306) check room Wohnzimmer
heatingcontrol.0	2019-12-27 19:14:34.270	debug	(9306) profile 0
heatingcontrol.0	2019-12-27 19:14:34.269	debug	(9306) get profile
heatingcontrol.0	2019-12-27 19:14:34.269	debug	(9306) profile type 2
heatingcontrol.0	2019-12-27 19:14:34.262	info	(9306) calculating new target temperatures
heatingcontrol.0	2019-12-27 19:14:34.259	info	(9306) external states checked, done
heatingcontrol.0	2019-12-27 19:14:34.258	info	(9306) setting HolidayPresent to true
heatingcontrol.0	2019-12-27 19:14:34.257	debug	(9306) checking Path2HolidayPresentDP
heatingcontrol.0	2019-12-27 19:14:34.254	debug	(9306) checking Path2PartyNowDP
heatingcontrol.0	2019-12-27 19:14:34.253	debug	(9306) checking Path2GuestsPresentDP
heatingcontrol.0	2019-12-27 19:14:34.251	info	(9306) setting VacationAbsent to false
heatingcontrol.0	2019-12-27 19:14:34.248	debug	(9306) checking Path2VacationDP
heatingcontrol.0	2019-12-27 19:14:34.244	debug	(9306) checking Path2PresentDP
heatingcontrol.0	2019-12-27 19:14:34.242	info	(9306) setting PublicHolidyToday to false
heatingcontrol.0	2019-12-27 19:14:34.241	debug	(9306) checking Path2FeiertagAdapter
heatingcontrol.0	2019-12-27 19:14:34.239	info	(9306) checking all external states
heatingcontrol.0	2019-12-27 19:14:34.232	debug	(9306) Check sensors for Julia
heatingcontrol.0	2019-12-27 19:14:34.226	debug	(9306) Check sensors for Martin
heatingcontrol.0	2019-12-27 19:14:34.223	debug	(9306) Check sensors for Toilette
heatingcontrol.0	2019-12-27 19:14:34.219	debug	(9306) Check sensors for Schlafzimmer
heatingcontrol.0	2019-12-27 19:14:34.216	debug	(9306) got sensor state {"val":false,"ack":true,"ts":1577470399992,"q":0,"from":"system.adapter.sonoff.0","user":"system.user.admin","lc":1577455961832} from sonoff.0.Umweltsensor.POWER
heatingcontrol.0	2019-12-27 19:14:34.205	debug	(9306) Check sensors for Wohnzimmer
heatingcontrol.0	2019-12-27 19:14:34.203	debug	(9306) [INFO] status = true next event: 30 Dec 2019 17:00:00
heatingcontrol.0	2019-12-27 19:14:34.201	debug	(9306) [INFO] status = true next event: 27 Dec 2019 20:00:00
heatingcontrol.0	2019-12-27 19:14:34.200	debug	(9306) [INFO] status = true next event: 30 Dec 2019 14:00:00
heatingcontrol.0	2019-12-27 19:14:34.198	debug	(9306) [INFO] status = true next event: 27 Dec 2019 21:00:00
heatingcontrol.0	2019-12-27 19:14:34.197	debug	(9306) [INFO] status = true next event: 30 Dec 2019 16:00:00
heatingcontrol.0	2019-12-27 19:14:34.192	debug	(9306) [INFO] status = true next event: 28 Dec 2019 21:00:00
heatingcontrol.0	2019-12-27 19:14:34.189	debug	(9306) [INFO] status = true next event: 28 Dec 2019 16:00:00
heatingcontrol.0	2019-12-27 19:14:34.187	debug	(9306) [INFO] status = true next event: 28 Dec 2019 12:00:00
heatingcontrol.0	2019-12-27 19:14:34.184	debug	(9306) [INFO] status = true next event: 28 Dec 2019 08:00:00
heatingcontrol.0	2019-12-27 19:14:34.183	debug	(9306) [INFO] status = true next event: 28 Dec 2019 05:00:00
heatingcontrol.0	2019-12-27 19:14:34.182	debug	(9306) [INFO] status = true next event: 27 Dec 2019 22:30:00
heatingcontrol.0	2019-12-27 19:14:34.179	debug	(9306) [INFO] status = true next event: 30 Dec 2019 15:00:00
heatingcontrol.0	2019-12-27 19:14:34.177	debug	(9306) [INFO] status = true next event: 30 Dec 2019 12:00:00
heatingcontrol.0	2019-12-27 19:14:34.175	debug	(9306) [INFO] status = true next event: 30 Dec 2019 08:00:00
heatingcontrol.0	2019-12-27 19:14:34.173	debug	(9306) [INFO] status = true next event: 30 Dec 2019 05:00:00
heatingcontrol.0	2019-12-27 19:14:34.165	debug	(9306) create cron job #14 at 17:0 string: 0 0 17 * * 1-5 Europe/Berlin
heatingcontrol.0	2019-12-27 19:14:34.163	debug	(9306) create cron job #13 at 20:0 string: 0 0 20 * * 1-5 Europe/Berlin
heatingcontrol.0	2019-12-27 19:14:34.158	debug	(9306) create cron job #12 at 14:0 string: 0 0 14 * * 1-5 Europe/Berlin
heatingcontrol.0	2019-12-27 19:14:34.156	debug	(9306) create cron job #11 at 21:0 string: 0 0 21 * * 1-5 Europe/Berlin
heatingcontrol.0	2019-12-27 19:14:34.152	debug	(9306) create cron job #10 at 16:0 string: 0 0 16 * * 1-5 Europe/Berlin
heatingcontrol.0	2019-12-27 19:14:34.148	debug	(9306) create cron job #9 at 21:0 string: 0 0 21 * * 0,6 Europe/Berlin
heatingcontrol.0	2019-12-27 19:14:34.144	debug	(9306) create cron job #8 at 16:0 string: 0 0 16 * * 0,6 Europe/Berlin
heatingcontrol.0	2019-12-27 19:14:34.140	debug	(9306) create cron job #7 at 12:0 string: 0 0 12 * * 0,6 Europe/Berlin
heatingcontrol.0	2019-12-27 19:14:34.136	debug	(9306) create cron job #6 at 8:0 string: 0 0 8 * * 0,6 Europe/Berlin
heatingcontrol.0	2019-12-27 19:14:34.133	debug	(9306) create cron job #5 at 5:0 string: 0 0 5 * * 0,6 Europe/Berlin
heatingcontrol.0	2019-12-27 19:14:34.128	debug	(9306) create cron job #4 at 22:30 string: 0 30 22 * * 1-5 Europe/Berlin
heatingcontrol.0	2019-12-27 19:14:34.122	debug	(9306) create cron job #3 at 15:0 string: 0 0 15 * * 1-5 Europe/Berlin
heatingcontrol.0	2019-12-27 19:14:34.118	debug	(9306) create cron job #2 at 12:0 string: 0 0 12 * * 1-5 Europe/Berlin
heatingcontrol.0	2019-12-27 19:14:34.110	debug	(9306) create cron job #1 at 8:0 string: 0 0 8 * * 1-5 Europe/Berlin
heatingcontrol.0	2019-12-27 19:14:34.086	debug	(9306) create cron job #0 at 5:0 string: 0 0 5 * * 1-5 Europe/Berlin
heatingcontrol.0	2019-12-27 19:14:34.085	debug	(9306) ---2 found time for Julia at {"val":"21:00","ack":true,"ts":1573288777027,"q":0,"from":"system.adapter.heatingcontrol.0","user":"system.user.admin","lc":1573288777027} 21:00
heatingcontrol.0	2019-12-27 19:14:34.083	debug	(9306) ---2 found time for Julia at {"val":"16:00","ack":true,"ts":1573288777026,"q":0,"from":"system.adapter.heatingcontrol.0","user":"system.user.admin","lc":1573288777026} 16:00
heatingcontrol.0	2019-12-27 19:14:34.082	debug	(9306) ---2 found time for Julia at {"val":"12:00","ack":true,"ts":1573288777026,"q":0,"from":"system.adapter.heatingcontrol.0","user":"system.user.admin","lc":1573288777026} 12:00
heatingcontrol.0	2019-12-27 19:14:34.081	debug	(9306) ---2 found time for Julia at {"val":"08:00","ack":true,"ts":1573288777025,"q":0,"from":"system.adapter.heatingcontrol.0","user":"system.user.admin","lc":1573288777025} 08:00
heatingcontrol.0	2019-12-27 19:14:34.080	debug	(9306) ---2 found time for Julia at {"val":"05:00","ack":true,"ts":1573288777025,"q":0,"from":"system.adapter.heatingcontrol.0","user":"system.user.admin","lc":1573288777025} 05:00
heatingcontrol.0	2019-12-27 19:14:34.079	debug	(9306) setting Sa - Su
heatingcontrol.0	2019-12-27 19:14:34.078	debug	(9306) ---1 found time for Julia at {"val":"21:00","ack":true,"ts":1569439218640,"q":0,"from":"system.adapter.heatingcontrol.0","user":"system.user.admin","lc":1569439218640} 21:00
heatingcontrol.0	2019-12-27 19:14:34.077	debug	(9306) ---1 found time for Julia at {"val":"16:00","ack":true,"ts":1569439218634,"q":0,"from":"system.adapter.heatingcontrol.0","user":"system.user.admin","lc":1569439218634} 16:00
heatingcontrol.0	2019-12-27 19:14:34.076	debug	(9306) ---1 found time for Julia at {"val":"14:00","ack":true,"ts":1569530102574,"q":0,"from":"system.adapter.heatingcontrol.0","user":"system.user.admin","lc":1569530102421} 14:00
heatingcontrol.0	2019-12-27 19:14:34.074	debug	(9306) ---1 found time for Julia at {"val":"08:00","ack":true,"ts":1569439218633,"q":0,"from":"system.adapter.heatingcontrol.0","user":"system.user.admin","lc":1569439218633} 08:00
heatingcontrol.0	2019-12-27 19:14:34.073	debug	(9306) ---1 found time for Julia at {"val":"05:00","ack":true,"ts":1569439218622,"q":0,"from":"system.adapter.heatingcontrol.0","user":"system.user.admin","lc":1569439218622} 05:00
heatingcontrol.0	2019-12-27 19:14:34.072	debug	(9306) setting Mo - Fr
heatingcontrol.0	2019-12-27 19:14:34.071	debug	(9306) ---2 found time for Martin at {"val":"21:00","ack":true,"ts":1573288776608,"q":0,"from":"system.adapter.heatingcontrol.0","user":"system.user.admin","lc":1573288776608} 21:00
heatingcontrol.0	2019-12-27 19:14:34.070	debug	(9306) ---2 found time for Martin at {"val":"16:00","ack":true,"ts":1573288776607,"q":0,"from":"system.adapter.heatingcontrol.0","user":"system.user.admin","lc":1573288776607} 16:00
heatingcontrol.0	2019-12-27 19:14:34.069	debug	(9306) ---2 found time for Martin at {"val":"12:00","ack":true,"ts":1573288776604,"q":0,"from":"system.adapter.heatingcontrol.0","user":"system.user.admin","lc":1573288776604} 12:00
heatingcontrol.0	2019-12-27 19:14:34.067	debug	(9306) ---2 found time for Martin at {"val":"08:00","ack":true,"ts":1573288776603,"q":0,"from":"system.adapter.heatingcontrol.0","user":"system.user.admin","lc":1573288776603} 08:00
heatingcontrol.0	2019-12-27 19:14:34.066	debug	(9306) ---2 found time for Martin at {"val":"05:00","ack":true,"ts":1573288776603,"q":0,"from":"system.adapter.heatingcontrol.0","user":"system.user.admin","lc":1573288776603} 05:00
heatingcontrol.0	2019-12-27 19:14:34.065	debug	(9306) setting Sa - Su
heatingcontrol.0	2019-12-27 19:14:34.064	debug	(9306) ---1 found time for Martin at {"val":"21:00","ack":true,"ts":1569439218463,"q":0,"from":"system.adapter.heatingcontrol.0","user":"system.user.admin","lc":1569439218463} 21:00
heatingcontrol.0	2019-12-27 19:14:34.062	debug	(9306) push to list = 17,00
heatingcontrol.0	2019-12-27 19:14:34.062	debug	(9306) ---1 found time for Martin at {"val":"17:00","ack":true,"ts":1569530277717,"q":0,"from":"system.adapter.heatingcontrol.0","user":"system.user.admin","lc":1569530277598} 17:00
heatingcontrol.0	2019-12-27 19:14:34.061	debug	(9306) ---1 found time for Martin at {"val":"12:00","ack":true,"ts":1569439218445,"q":0,"from":"system.adapter.heatingcontrol.0","user":"system.user.admin","lc":1569439218445} 12:00
heatingcontrol.0	2019-12-27 19:14:34.059	debug	(9306) ---1 found time for Martin at {"val":"08:00","ack":true,"ts":1569439218419,"q":0,"from":"system.adapter.heatingcontrol.0","user":"system.user.admin","lc":1569439218419} 08:00
heatingcontrol.0	2019-12-27 19:14:34.058	debug	(9306) ---1 found time for Martin at {"val":"05:00","ack":true,"ts":1569439218418,"q":0,"from":"system.adapter.heatingcontrol.0","user":"system.user.admin","lc":1569439218418} 05:00
heatingcontrol.0	2019-12-27 19:14:34.057	debug	(9306) setting Mo - Fr
heatingcontrol.0	2019-12-27 19:14:34.057	debug	(9306) ---2 found time for Toilette at {"val":"21:00","ack":true,"ts":1573288776243,"q":0,"from":"system.adapter.heatingcontrol.0","user":"system.user.admin","lc":1573288776243} 21:00
heatingcontrol.0	2019-12-27 19:14:34.055	debug	(9306) ---2 found time for Toilette at {"val":"16:00","ack":true,"ts":1573288776242,"q":0,"from":"system.adapter.heatingcontrol.0","user":"system.user.admin","lc":1573288776242} 16:00
heatingcontrol.0	2019-12-27 19:14:34.054	debug	(9306) ---2 found time for Toilette at {"val":"12:00","ack":true,"ts":1573288776239,"q":0,"from":"system.adapter.heatingcontrol.0","user":"system.user.admin","lc":1573288776239} 12:00
heatingcontrol.0	2019-12-27 19:14:34.052	debug	(9306) ---2 found time for Toilette at {"val":"08:00","ack":true,"ts":1573288776239,"q":0,"from":"system.adapter.heatingcontrol.0","user":"system.user.admin","lc":1573288776239} 08:00
heatingcontrol.0	2019-12-27 19:14:34.050	debug	(9306) ---2 found time for Toilette at {"val":"05:00","ack":true,"ts":1573288776239,"q":0,"from":"system.adapter.heatingcontrol.0","user":"system.user.admin","lc":1573288776239} 05:00
heatingcontrol.0	2019-12-27 19:14:34.042	debug	(9306) setting Sa - Su
heatingcontrol.0	2019-12-27 19:14:34.042	debug	(9306) push to list = 20,00
heatingcontrol.0	2019-12-27 19:14:34.041	debug	(9306) ---1 found time for Toilette at {"val":"20:00","ack":true,"ts":1569472422559,"q":0,"from":"system.adapter.heatingcontrol.0","user":"system.user.admin","lc":1569472422402} 20:00
heatingcontrol.0	2019-12-27 19:14:34.040	debug	(9306) ---1 found time for Toilette at {"val":"16:00","ack":true,"ts":1569439218296,"q":0,"from":"system.adapter.heatingcontrol.0","user":"system.user.admin","lc":1569439218296} 16:00
heatingcontrol.0	2019-12-27 19:14:34.039	debug	(9306) push to list = 14,00
heatingcontrol.0	2019-12-27 19:14:34.039	debug	(9306) ---1 found time for Toilette at {"val":"14:00","ack":true,"ts":1569440269757,"q":0,"from":"system.adapter.heatingcontrol.0","user":"system.user.admin","lc":1569440269565} 14:00
heatingcontrol.0	2019-12-27 19:14:34.038	debug	(9306) ---1 found time for Toilette at {"val":"08:00","ack":true,"ts":1569439218272,"q":0,"from":"system.adapter.heatingcontrol.0","user":"system.user.admin","lc":1569439218272} 08:00
heatingcontrol.0	2019-12-27 19:14:34.036	debug	(9306) ---1 found time for Toilette at {"val":"05:00","ack":true,"ts":1569439218270,"q":0,"from":"system.adapter.heatingcontrol.0","user":"system.user.admin","lc":1569439218270} 05:00
heatingcontrol.0	2019-12-27 19:14:34.034	debug	(9306) setting Mo - Fr
heatingcontrol.0	2019-12-27 19:14:34.034	debug	(9306) ---2 found time for Schlafzimmer at {"val":"21:00","ack":true,"ts":1573288776036,"q":0,"from":"system.adapter.heatingcontrol.0","user":"system.user.admin","lc":1573288776036} 21:00
heatingcontrol.0	2019-12-27 19:14:34.033	debug	(9306) ---2 found time for Schlafzimmer at {"val":"16:00","ack":true,"ts":1573288776035,"q":0,"from":"system.adapter.heatingcontrol.0","user":"system.user.admin","lc":1573288776035} 16:00
heatingcontrol.0	2019-12-27 19:14:34.031	debug	(9306) ---2 found time for Schlafzimmer at {"val":"12:00","ack":true,"ts":1573288776035,"q":0,"from":"system.adapter.heatingcontrol.0","user":"system.user.admin","lc":1573288776035} 12:00
heatingcontrol.0	2019-12-27 19:14:34.029	debug	(9306) ---2 found time for Schlafzimmer at {"val":"08:00","ack":true,"ts":1573288776032,"q":0,"from":"system.adapter.heatingcontrol.0","user":"system.user.admin","lc":1573288776032} 08:00
heatingcontrol.0	2019-12-27 19:14:34.028	debug	(9306) ---2 found time for Schlafzimmer at {"val":"05:00","ack":true,"ts":1573288776031,"q":0,"from":"system.adapter.heatingcontrol.0","user":"system.user.admin","lc":1573288776031} 05:00
heatingcontrol.0	2019-12-27 19:14:34.026	debug	(9306) setting Sa - Su
heatingcontrol.0	2019-12-27 19:14:34.026	debug	(9306) push to list = 21,00
heatingcontrol.0	2019-12-27 19:14:34.025	debug	(9306) ---1 found time for Schlafzimmer at {"val":"21:00","ack":true,"ts":1569439218134,"q":0,"from":"system.adapter.heatingcontrol.0","user":"system.user.admin","lc":1569439218134} 21:00
heatingcontrol.0	2019-12-27 19:14:34.024	debug	(9306) push to list = 16,00
heatingcontrol.0	2019-12-27 19:14:34.024	debug	(9306) ---1 found time for Schlafzimmer at {"val":"16:00","ack":true,"ts":1569439218134,"q":0,"from":"system.adapter.heatingcontrol.0","user":"system.user.admin","lc":1569439218134} 16:00
heatingcontrol.0	2019-12-27 19:14:34.019	debug	(9306) ---1 found time for Schlafzimmer at {"val":"12:00","ack":true,"ts":1569439218134,"q":0,"from":"system.adapter.heatingcontrol.0","user":"system.user.admin","lc":1569439218134} 12:00
heatingcontrol.0	2019-12-27 19:14:34.014	debug	(9306) ---1 found time for Schlafzimmer at {"val":"08:00","ack":true,"ts":1569439218133,"q":0,"from":"system.adapter.heatingcontrol.0","user":"system.user.admin","lc":1569439218133} 08:00
heatingcontrol.0	2019-12-27 19:14:33.997	debug	(9306) ---1 found time for Schlafzimmer at {"val":"05:00","ack":true,"ts":1569439218108,"q":0,"from":"system.adapter.heatingcontrol.0","user":"system.user.admin","lc":1569439218108} 05:00
heatingcontrol.0	2019-12-27 19:14:33.993	debug	(9306) setting Mo - Fr
heatingcontrol.0	2019-12-27 19:14:33.992	debug	(9306) push to list = 21,00
heatingcontrol.0	2019-12-27 19:14:33.992	debug	(9306) ---2 found time for Wohnzimmer at {"val":"21:00","ack":true,"ts":1573288775709,"q":0,"from":"system.adapter.heatingcontrol.0","user":"system.user.admin","lc":1573288775709} 21:00
heatingcontrol.0	2019-12-27 19:14:33.988	debug	(9306) push to list = 16,00
heatingcontrol.0	2019-12-27 19:14:33.987	debug	(9306) ---2 found time for Wohnzimmer at {"val":"16:00","ack":true,"ts":1573288775708,"q":0,"from":"system.adapter.heatingcontrol.0","user":"system.user.admin","lc":1573288775708} 16:00
heatingcontrol.0	2019-12-27 19:14:33.982	debug	(9306) push to list = 12,00
heatingcontrol.0	2019-12-27 19:14:33.982	debug	(9306) ---2 found time for Wohnzimmer at {"val":"12:00","ack":true,"ts":1573288775708,"q":0,"from":"system.adapter.heatingcontrol.0","user":"system.user.admin","lc":1573288775708} 12:00
heatingcontrol.0	2019-12-27 19:14:33.980	debug	(9306) push to list = 08,00
heatingcontrol.0	2019-12-27 19:14:33.980	debug	(9306) ---2 found time for Wohnzimmer at {"val":"08:00","ack":true,"ts":1573288775707,"q":0,"from":"system.adapter.heatingcontrol.0","user":"system.user.admin","lc":1573288775707} 08:00
heatingcontrol.0	2019-12-27 19:14:33.979	debug	(9306) push to list = 05,00
heatingcontrol.0	2019-12-27 19:14:33.978	debug	(9306) ---2 found time for Wohnzimmer at {"val":"05:00","ack":true,"ts":1573288775696,"q":0,"from":"system.adapter.heatingcontrol.0","user":"system.user.admin","lc":1573288775696} 05:00
heatingcontrol.0	2019-12-27 19:14:33.976	debug	(9306) setting Sa - Su
heatingcontrol.0	2019-12-27 19:14:33.976	debug	(9306) push to list = 22,30
heatingcontrol.0	2019-12-27 19:14:33.976	debug	(9306) ---1 found time for Wohnzimmer at {"val":"22:30","ack":true,"ts":1569530528263,"q":0,"from":"system.adapter.heatingcontrol.0","user":"system.user.admin","lc":1569530528120} 22:30
heatingcontrol.0	2019-12-27 19:14:33.974	debug	(9306) push to list = 15,00
heatingcontrol.0	2019-12-27 19:14:33.974	debug	(9306) ---1 found time for Wohnzimmer at {"val":"15:00","ack":true,"ts":1569530501094,"q":0,"from":"system.adapter.heatingcontrol.0","user":"system.user.admin","lc":1569530500928} 15:00
heatingcontrol.0	2019-12-27 19:14:33.972	debug	(9306) push to list = 12,00
heatingcontrol.0	2019-12-27 19:14:33.972	debug	(9306) ---1 found time for Wohnzimmer at {"val":"12:00","ack":true,"ts":1569439217955,"q":0,"from":"system.adapter.heatingcontrol.0","user":"system.user.admin","lc":1569439217955} 12:00
heatingcontrol.0	2019-12-27 19:14:33.971	debug	(9306) push to list = 08,00
heatingcontrol.0	2019-12-27 19:14:33.970	debug	(9306) ---1 found time for Wohnzimmer at {"val":"08:00","ack":true,"ts":1569439217954,"q":0,"from":"system.adapter.heatingcontrol.0","user":"system.user.admin","lc":1569439217954} 08:00
heatingcontrol.0	2019-12-27 19:14:33.968	debug	(9306) push to list = 05,00
heatingcontrol.0	2019-12-27 19:14:33.967	debug	(9306) ---1 found time for Wohnzimmer at {"val":"05:00","ack":true,"ts":1569439217954,"q":0,"from":"system.adapter.heatingcontrol.0","user":"system.user.admin","lc":1569439217954} 05:00
heatingcontrol.0	2019-12-27 19:14:33.965	debug	(9306) setting Mo - Fr
heatingcontrol.0	2019-12-27 19:14:33.965	debug	(9306) profile 0
heatingcontrol.0	2019-12-27 19:14:33.962	debug	(9306) get profile
heatingcontrol.0	2019-12-27 19:14:33.961	debug	(9306) start CalculateNextTime, profile type 2
heatingcontrol.0	2019-12-27 19:14:33.957	debug	(9306) system date format DD.MM.YYYY
heatingcontrol.0	2019-12-27 19:14:33.911	debug	(9306) CreateDatepoints done
heatingcontrol.0	2019-12-27 19:14:33.910	debug	(9306) add state Profiles.0.Julia.Sa-So.Periods.4 max 5
heatingcontrol.0	2019-12-27 19:14:33.909	debug	(9306) add state Profiles.0.Julia.Sa-So.Periods.3 max 5
heatingcontrol.0	2019-12-27 19:14:33.909	debug	(9306) add state Profiles.0.Julia.Sa-So.Periods.2 max 5
heatingcontrol.0	2019-12-27 19:14:33.908	debug	(9306) add state Profiles.0.Julia.Sa-So.Periods.1 max 5
heatingcontrol.0	2019-12-27 19:14:33.908	debug	(9306) add state Profiles.0.Julia.Sa-So.Periods.0 max 5
heatingcontrol.0	2019-12-27 19:14:33.907	debug	(9306) add state Profiles.0.Julia.Mo-Fr.Periods.4 max 5
heatingcontrol.0	2019-12-27 19:14:33.906	debug	(9306) add state Profiles.0.Julia.Mo-Fr.Periods.3 max 5
heatingcontrol.0	2019-12-27 19:14:33.906	debug	(9306) add state Profiles.0.Julia.Mo-Fr.Periods.2 max 5
heatingcontrol.0	2019-12-27 19:14:33.905	debug	(9306) add state Profiles.0.Julia.Mo-Fr.Periods.1 max 5
heatingcontrol.0	2019-12-27 19:14:33.905	debug	(9306) add state Profiles.0.Julia.Mo-Fr.Periods.0 max 5
heatingcontrol.0	2019-12-27 19:14:33.904	debug	(9306) Profile Type Mo-FR + Sa-So, profiles 1
heatingcontrol.0	2019-12-27 19:14:33.904	debug	(9306) room Julia with 5 periods
heatingcontrol.0	2019-12-27 19:14:33.904	info	(9306) no temperature degrease configured 3
heatingcontrol.0	2019-12-27 19:14:33.903	debug	(9306) add state Profiles.0.Martin.Sa-So.Periods.4 max 5
heatingcontrol.0	2019-12-27 19:14:33.902	debug	(9306) add state Profiles.0.Martin.Sa-So.Periods.3 max 5
heatingcontrol.0	2019-12-27 19:14:33.902	debug	(9306) add state Profiles.0.Martin.Sa-So.Periods.2 max 5
heatingcontrol.0	2019-12-27 19:14:33.901	debug	(9306) add state Profiles.0.Martin.Sa-So.Periods.1 max 5
heatingcontrol.0	2019-12-27 19:14:33.901	debug	(9306) add state Profiles.0.Martin.Sa-So.Periods.0 max 5
heatingcontrol.0	2019-12-27 19:14:33.900	debug	(9306) add state Profiles.0.Martin.Mo-Fr.Periods.4 max 5
heatingcontrol.0	2019-12-27 19:14:33.899	debug	(9306) add state Profiles.0.Martin.Mo-Fr.Periods.3 max 5
heatingcontrol.0	2019-12-27 19:14:33.899	debug	(9306) add state Profiles.0.Martin.Mo-Fr.Periods.2 max 5
heatingcontrol.0	2019-12-27 19:14:33.898	debug	(9306) add state Profiles.0.Martin.Mo-Fr.Periods.1 max 5
heatingcontrol.0	2019-12-27 19:14:33.898	debug	(9306) add state Profiles.0.Martin.Mo-Fr.Periods.0 max 5
heatingcontrol.0	2019-12-27 19:14:33.897	debug	(9306) Profile Type Mo-FR + Sa-So, profiles 1
heatingcontrol.0	2019-12-27 19:14:33.897	debug	(9306) room Martin with 5 periods
heatingcontrol.0	2019-12-27 19:14:33.897	info	(9306) no temperature degrease configured 3
heatingcontrol.0	2019-12-27 19:14:33.896	debug	(9306) add state Profiles.0.Toilette.Sa-So.Periods.4 max 5
heatingcontrol.0	2019-12-27 19:14:33.896	debug	(9306) add state Profiles.0.Toilette.Sa-So.Periods.3 max 5
heatingcontrol.0	2019-12-27 19:14:33.895	debug	(9306) add state Profiles.0.Toilette.Sa-So.Periods.2 max 5
heatingcontrol.0	2019-12-27 19:14:33.894	debug	(9306) add state Profiles.0.Toilette.Sa-So.Periods.1 max 5
heatingcontrol.0	2019-12-27 19:14:33.893	debug	(9306) add state Profiles.0.Toilette.Sa-So.Periods.0 max 5
heatingcontrol.0	2019-12-27 19:14:33.892	debug	(9306) add state Profiles.0.Toilette.Mo-Fr.Periods.4 max 5
heatingcontrol.0	2019-12-27 19:14:33.892	debug	(9306) add state Profiles.0.Toilette.Mo-Fr.Periods.3 max 5
heatingcontrol.0	2019-12-27 19:14:33.891	debug	(9306) add state Profiles.0.Toilette.Mo-Fr.Periods.2 max 5
heatingcontrol.0	2019-12-27 19:14:33.890	debug	(9306) add state Profiles.0.Toilette.Mo-Fr.Periods.1 max 5
heatingcontrol.0	2019-12-27 19:14:33.890	debug	(9306) add state Profiles.0.Toilette.Mo-Fr.Periods.0 max 5
heatingcontrol.0	2019-12-27 19:14:33.889	debug	(9306) Profile Type Mo-FR + Sa-So, profiles 1
heatingcontrol.0	2019-12-27 19:14:33.889	debug	(9306) room Toilette with 5 periods
heatingcontrol.0	2019-12-27 19:14:33.889	info	(9306) no temperature degrease configured 3
heatingcontrol.0	2019-12-27 19:14:33.888	debug	(9306) add state Profiles.0.Schlafzimmer.Sa-So.Periods.4 max 5
heatingcontrol.0	2019-12-27 19:14:33.887	debug	(9306) add state Profiles.0.Schlafzimmer.Sa-So.Periods.3 max 5
heatingcontrol.0	2019-12-27 19:14:33.887	debug	(9306) add state Profiles.0.Schlafzimmer.Sa-So.Periods.2 max 5
heatingcontrol.0	2019-12-27 19:14:33.886	debug	(9306) add state Profiles.0.Schlafzimmer.Sa-So.Periods.1 max 5
heatingcontrol.0	2019-12-27 19:14:33.885	debug	(9306) add state Profiles.0.Schlafzimmer.Sa-So.Periods.0 max 5
heatingcontrol.0	2019-12-27 19:14:33.885	debug	(9306) add state Profiles.0.Schlafzimmer.Mo-Fr.Periods.4 max 5
heatingcontrol.0	2019-12-27 19:14:33.884	debug	(9306) add state Profiles.0.Schlafzimmer.Mo-Fr.Periods.3 max 5
heatingcontrol.0	2019-12-27 19:14:33.883	debug	(9306) add state Profiles.0.Schlafzimmer.Mo-Fr.Periods.2 max 5
heatingcontrol.0	2019-12-27 19:14:33.883	debug	(9306) add state Profiles.0.Schlafzimmer.Mo-Fr.Periods.1 max 5
heatingcontrol.0	2019-12-27 19:14:33.882	debug	(9306) add state Profiles.0.Schlafzimmer.Mo-Fr.Periods.0 max 5
heatingcontrol.0	2019-12-27 19:14:33.882	debug	(9306) Profile Type Mo-FR + Sa-So, profiles 1
heatingcontrol.0	2019-12-27 19:14:33.881	debug	(9306) room Schlafzimmer with 5 periods
heatingcontrol.0	2019-12-27 19:14:33.880	info	(9306) no temperature degrease configured 3
heatingcontrol.0	2019-12-27 19:14:33.879	debug	(9306) add state Profiles.0.Wohnzimmer.Sa-So.Periods.4 max 5
heatingcontrol.0	2019-12-27 19:14:33.879	debug	(9306) add state Profiles.0.Wohnzimmer.Sa-So.Periods.3 max 5
heatingcontrol.0	2019-12-27 19:14:33.878	debug	(9306) add state Profiles.0.Wohnzimmer.Sa-So.Periods.2 max 5
heatingcontrol.0	2019-12-27 19:14:33.877	debug	(9306) add state Profiles.0.Wohnzimmer.Sa-So.Periods.1 max 5
heatingcontrol.0	2019-12-27 19:14:33.877	debug	(9306) add state Profiles.0.Wohnzimmer.Sa-So.Periods.0 max 5
heatingcontrol.0	2019-12-27 19:14:33.876	debug	(9306) add state Profiles.0.Wohnzimmer.Mo-Fr.Periods.4 max 5
heatingcontrol.0	2019-12-27 19:14:33.875	debug	(9306) add state Profiles.0.Wohnzimmer.Mo-Fr.Periods.3 max 5
heatingcontrol.0	2019-12-27 19:14:33.874	debug	(9306) add state Profiles.0.Wohnzimmer.Mo-Fr.Periods.2 max 5
heatingcontrol.0	2019-12-27 19:14:33.872	debug	(9306) add state Profiles.0.Wohnzimmer.Mo-Fr.Periods.1 max 5
heatingcontrol.0	2019-12-27 19:14:33.870	debug	(9306) add state Profiles.0.Wohnzimmer.Mo-Fr.Periods.0 max 5
heatingcontrol.0	2019-12-27 19:14:33.870	debug	(9306) Profile Type Mo-FR + Sa-So, profiles 1
heatingcontrol.0	2019-12-27 19:14:33.869	debug	(9306) room Wohnzimmer with 5 periods
heatingcontrol.0	2019-12-27 19:14:33.869	info	(9306) no temperature degrease configured 3
heatingcontrol.0	2019-12-27 19:14:33.868	debug	(9306) rooms 5
heatingcontrol.0	2019-12-27 19:14:33.853	debug	(9306) create data points for Julia
heatingcontrol.0	2019-12-27 19:14:33.842	debug	(9306) create data points for Martin
heatingcontrol.0	2019-12-27 19:14:33.831	debug	(9306) create data points for Toilette
heatingcontrol.0	2019-12-27 19:14:33.817	debug	(9306) create data points for Schlafzimmer
heatingcontrol.0	2019-12-27 19:14:33.802	debug	(9306) create data points for Wohnzimmer
heatingcontrol.0	2019-12-27 19:14:33.754	debug	(9306) start CreateDatepoints
heatingcontrol.0	2019-12-27 19:14:33.752	debug	(9306) devices [{"id":1,"name":"Target Temp","OID_Current":"fritzdect.0.Hgroup_2E:B9:36-900.actualtemp","OID_Target":"fritzdect.0.Hgroup_2E:B9:36-900.targettemp","isActive":true,"type":1,"room":"Wohnz
heatingcontrol.0	2019-12-27 19:14:33.713	info	(9306) starting. Version 0.3.11 in /opt/iobroker/node_modules/iobroker.heatingcontrol, node: v10.18.0

Kannst du mal einen Blich drauf werfen woher das kommen könnte?
Danke

[Rene_HM]

@Chaot sagte in Test Adapter HeatingControl v0.3.x:

exception in CheckTemperatureChange [ReferenceError: RoomState is not defined]

Die Version 0.3.12 behebt dieses Problem.

warn: heatingcontrol.0 (32760) try to convert 24,0 to a number

Diese Meldung erscheint, wenn vom Vis auf eine Temperatur anstatt einer Zahl ein string geschrieben wird. Intern konvertiere ich den string dann in eine Zahl, besser wäre es aber, wenn das vis-widget (oder derjenige der schreibt, evtl. auch ein script) gleich eine Zahl schreiben würde...

[Chaot]

@Rene_HM Danke dir für die schnelle 0.3.12!
Fehler ist weg.
Das Widget werde ich mir mal raussuchen und disqualifizieren.

[Gsiberger]

@Rene_HM
Vielen Dank dir für die schnelle 0.3.12!
Mit 0.3.12 funktionieren auch "Urlaub anwesend" und "Sensoren" wieder

[mrMuppet]

Gibt es einen Trick wie ich die alten, nicht mehr verwendeten Datenpunkte dieses Adapters wieder loswerde? Da haben sich über die verschiendene Versionen schon einige angesammelt und ich weiß gar nicht, wo ich jetzt aktuell die z.B. Urlaubsabsenkung einstellen muss.

[Rene_HM]

@mrMuppet Im einfachsten Fall den Adapter stoppen, alle Datenpunkte löschen und den Adapter wieder starten. Nachteil ist, dass man anschliessend die Einstellungen neu machen muss.
Absenkungen liegen unter Profiles im Pfad "absolut" bzw "relative" pro Raum.

Aktuell habe ich nicht vor, weitere Datenpunkte zu verschieben, obwohl es noch zwei github issues gibt, wo das angefragt wird:
https://github.com/rg-engineering/ioBroker.heatingcontrol/issues/61
https://github.com/rg-engineering/ioBroker.heatingcontrol/issues/56

Denkra created this issue in rg-engineering/ioBroker.heatingcontrol

closed Temperaturabsenkung/anhebung einstellungen #61

Denkra created this issue in rg-engineering/ioBroker.heatingcontrol

closed Temperatur Override verschieben #56

[martin.pawlik]

@Rene_HM Hallo Rene, ich finde die Idee des Adapters echt super und habe ihn mal testweise installiert. Ich habe ein Profil "jeden Tag" eingestellt und alle notwendigen Einstellungen durchgeführt. Leider muss ich feststellen, dass die "cron-jobs" immer nur für "Sun" verwendet werden. Die Variablen für "HolidayPresent" und "PublicHolidayToday" sind beide auf "false" gesetzt.

Habe ich irgendwas falsch eingestellt, oder ist hier noch ein Bug im System.

Spoiler

heatingcontrol.0 2019-12-28 14:19:01.394 debug (27420) create cron job #5 at 23:0 string: 0 0 23 * * Europe/Berlin
heatingcontrol.0 2019-12-28 14:19:01.384 debug (27420) create cron job #4 at 22:0 string: 0 0 22 * * Europe/Berlin
heatingcontrol.0 2019-12-28 14:19:01.357 debug (27420) create cron job #3 at 21:40 string: 0 40 21 * * Europe/Berlin
heatingcontrol.0 2019-12-28 14:19:01.347 debug (27420) create cron job #2 at 10:0 string: 0 0 10 * * Europe/Berlin
heatingcontrol.0 2019-12-28 14:19:01.294 debug (27420) HeatingPeriod: create cron job #1 at 31.03 string: 55 23 31 2 * Europe/Berlin
heatingcontrol.0 2019-12-28 14:19:01.234 debug (27420) HeatingPeriod: create cron job #0 at 01.10 string: 5 0 01 9 * Europe/Berlin
heatingcontrol.0 2019-12-28 14:19:01.233 info (27420) check for heating period based on settings between 01.10. and 31.03.
heatingcontrol.0 2019-12-28 14:19:01.231 debug (27420) push to list = 23,00
heatingcontrol.0 2019-12-28 14:19:01.230 debug (27420) ---found time for Wohnzimmer at "val":"23:00","ack":true,"ts":1577537510878,"q":0,"from":"system.adapter.heatingcontrol.0","user":"system.user.admin","lc":1577537510847} 23:00
heatingcontrol.0 2019-12-28 14:19:01.185 debug (27420) push to list = 22,00
heatingcontrol.0 2019-12-28 14:19:01.184 debug (27420) ---found time for Wohnzimmer at {"val":"22:00","ack":true,"ts":1577537522562,"q":0,"from":"system.adapter.heatingcontrol.0","user":"system.user.admin","lc":1577537522539} 22:00
heatingcontrol.0 2019-12-28 14:19:01.098 debug (27420) push to list = 21,40
heatingcontrol.0 2019-12-28 14:19:01.097 debug (27420) ---found time for Wohnzimmer at {"val":"21:40","ack":true,"ts":1577537525818,"q":0,"from":"system.adapter.heatingcontrol.0","user":"system.user.admin","lc":1577537525790} 21:40
heatingcontrol.0 2019-12-28 14:19:01.083 debug (27420) push to list = 10,00
heatingcontrol.0 2019-12-28 14:19:01.082 debug (27420) ---found time for Wohnzimmer at {"val":"10:00","ack":false,"ts":1577538535838,"q":0,"from":"system.adapter.web.0","user":"system.user.admin","lc":1577538535838} 10:00
heatingcontrol.0 2019-12-28 14:19:01.070 debug (27420) setting Sun
heatingcontrol.0 2019-12-28 14:19:01.058 debug (27420) profile 0
heatingcontrol.0 2019-12-28 14:19:00.984 debug (27420) get profile
heatingcontrol.0 2019-12-28 14:19:00.982 debug (27420) start CalculateNextTime, profile type 3

[Rene_HM]

@martin-pawlik Das habe ich bei meinem letzten Umbau kaputt gemacht
Version 0.3.13 behebt das Problem...

[guergen]

@Rene_HM
heinlich stil und leise hast Du den Punkt "minimum-Temperatur" eingefügt...
Danke hierfür !
Jetzt streiken nur noch meine Thermostate; d.h. sie machen was sie wollen: sie reissen die Ventile auf 60% auf, obwohl nur noch 0,1 Grad zum eingestellten Wert fehlen Aber das wird zu 100 % NICHT an diesem Adapter liegen, da ich MAX!-Thermostate verwende!

Tolle Arbeit dieser Adapter!

[guergen]

@Rene_HM Hast Du das "Heizperiodendatum" aus den Einstellungen entfernt? Ich hatte sowas im Auge, dass man da "sein" Datum einstellen konnte!?

[guergen]

@Rene_HM T´schuldigung... Augen auf... ist doch noch da....