Test Adapter HeatingControl v2.12.x
-
@martinschm said in Test Adapter HeatingControl v0.3.x:
@Rene_HM said in Test Adapter HeatingControl v0.3.x:
@martinschm bzgl. des logs mit dem Fenstersensor.
Eigentlich sieht das log wie erwartet aus:- um 23:08:13 wird erkannt, dass ein Fenster offen ist
- um 23:08:30 wird erkannt, dass alle 4 Fenster wieder zu sind
Trotzdem läuft er in beiden Fällen in den Abwesenheits-Zweig, was im ersten Fall nicht sein sollte. Im ersten Fall sollte er in den FensterAuf-Modus laufen... Deshalb folgende Fragen:
- welche Absenkung fährst du (relative oder absolut)?
- ist das Verhalten anders, wenn du mihome.0.devices.magnet_158d0001de8c5e öffnest? Das ist der letzte Sensor, der für den Raum geprüft wird...
- wird im Datenpunkt heatingcontrol.0.Rooms.Schlafzimmer.WindowIsOpen angezeigt, dass ein Fenster offen ist?
- SensorDelay verwendest du nicht?
Hi,
ich verwende
- absolute Absenkung.
- SensorDelay ist 0
- WindowisOpen wird angezeigt als true
- der magnet_158d0001de8c5e ist der SZ Mitte, Log hab ich unten angehängt. Funktioniert leider auch nicht.
2019-12-30 19:43:48.075 - [32minfo[39m: heatingcontrol.0 (8950) Schlafzimmer window open on SZ Mitte 2019-12-30 19:43:48.076 - [34mdebug[39m: heatingcontrol.0 (8950) room to check is Schlafzimmer 2019-12-30 19:43:48.077 - [32minfo[39m: heatingcontrol.0 (8950) calculating new target temperatures 2019-12-30 19:43:48.077 - [34mdebug[39m: heatingcontrol.0 (8950) ### 222 not handled yet 2019-12-30 19:43:48.077 - [34mdebug[39m: heatingcontrol.0 (8950) ### not handled mihome.0.devices.magnet_158d0001de8c5e.state {"val":true,"ack":true,"ts":1577731428070,"q":0,"from":"system.adapter.mihome.0","user":"system.user.admin","lc":1577731428070} 2019-12-30 19:43:48.080 - [34mdebug[39m: heatingcontrol.0 (8950) profile type 2 2019-12-30 19:43:48.080 - [34mdebug[39m: heatingcontrol.0 (8950) get profile 2019-12-30 19:43:48.081 - [34mdebug[39m: heatingcontrol.0 (8950) profile 0 2019-12-30 19:43:48.081 - [34mdebug[39m: heatingcontrol.0 (8950) check room Schlafzimmer 2019-12-30 19:43:48.081 - [34mdebug[39m: heatingcontrol.0 (8950) VacationAbsentDecrease {"val":0,"ack":true,"ts":1576691313966,"q":0,"from":"system.adapter.heatingcontrol.0","user":"system.user.admin","lc":1576691313966} 2019-12-30 19:43:48.082 - [34mdebug[39m: heatingcontrol.0 (8950) number of periods 4 2019-12-30 19:43:48.082 - [34mdebug[39m: heatingcontrol.0 (8950) check ID Profiles.0.Schlafzimmer.Sa-So.Periods.0.time 2019-12-30 19:43:48.083 - [34mdebug[39m: heatingcontrol.0 (8950) check time for Schlafzimmer Profiles.0.Schlafzimmer.Sa-So.Periods.0.time 19 2019-12-30 19:43:48.083 - [34mdebug[39m: heatingcontrol.0 (8950) check ID Profiles.0.Schlafzimmer.Sa-So.Periods.1.time 2019-12-30 19:43:48.083 - [34mdebug[39m: heatingcontrol.0 (8950) check ID Profiles.0.Schlafzimmer.Sa-So.Periods.2.time 2019-12-30 19:43:48.084 - [34mdebug[39m: heatingcontrol.0 (8950) check ID Profiles.0.Schlafzimmer.Sa-So.Periods.3.time 2019-12-30 19:43:48.084 - [34mdebug[39m: heatingcontrol.0 (8950) ### current > 1 0 2 2019-12-30 19:43:48.085 - [34mdebug[39m: heatingcontrol.0 (8950) ### new target temp19 2019-12-30 19:43:48.085 - [32minfo[39m: heatingcontrol.0 (8950) room Schlafzimmer Thermostat HM-CC-RT-DN OEQ1733333 set to 19 2019-12-30 19:43:48.085 - [34mdebug[39m: heatingcontrol.0 (8950) thermostat hm-rpc.0.OEQ1733333.4.SET_TEMPERATURE nothing to do, already 19 2019-12-30 19:43:48.089 - [33mwarn[39m: heatingcontrol.0 (8950) HandleActorsGeneral: not implemented yet 2019-12-30 19:43:48.090 - [34mdebug[39m: heatingcontrol.0 (8950) [INFO] status = true next event: 31 Dec 2019 09:00:00 2019-12-30 19:43:48.091 - [34mdebug[39m: heatingcontrol.0 (8950) [INFO] status = true next event: 30 Dec 2019 21:00:00 2019-12-30 19:43:48.092 - [34mdebug[39m: heatingcontrol.0 (8950) [INFO] status = true next event: 30 Dec 2019 21:15:00 2019-12-30 19:43:48.094 - [34mdebug[39m: heatingcontrol.0 (8950) [INFO] status = true next event: 30 Dec 2019 21:30:00 2019-12-30 19:43:48.095 - [34mdebug[39m: heatingcontrol.0 (8950) [INFO] status = true next event: 4 Jan 2020 09:00:00 2019-12-30 19:43:48.096 - [34mdebug[39m: heatingcontrol.0 (8950) [INFO] status = true next event: 4 Jan 2020 21:00:00 2019-12-30 19:43:48.101 - [34mdebug[39m: heatingcontrol.0 (8950) [INFO] status = true next event: 4 Jan 2020 21:15:00 2019-12-30 19:43:48.103 - [34mdebug[39m: heatingcontrol.0 (8950) [INFO] status = true next event: 4 Jan 2020 21:30:00 2019-12-30 19:43:48.104 - [34mdebug[39m: heatingcontrol.0 (8950) [INFO] status = true next event: 31 Dec 2019 08:00:00 2019-12-30 19:43:48.106 - [34mdebug[39m: heatingcontrol.0 (8950) [INFO] status = true next event: 31 Dec 2019 14:20:00 2019-12-30 19:43:48.107 - [34mdebug[39m: heatingcontrol.0 (8950) [INFO] status = true next event: 31 Dec 2019 18:00:00 2019-12-30 19:43:48.108 - [34mdebug[39m: heatingcontrol.0 (8950) [INFO] status = true next event: 4 Jan 2020 08:00:00 2019-12-30 19:43:48.109 - [34mdebug[39m: heatingcontrol.0 (8950) [INFO] status = true next event: 4 Jan 2020 18:00:00 2019-12-30 19:43:48.112 - [34mdebug[39m: heatingcontrol.0 (8950) [INFO] status = true next event: 4 Jan 2020 18:30:00 2019-12-30 19:43:48.113 - [34mdebug[39m: heatingcontrol.0 (8950) [INFO] status = true next event: 4 Jan 2020 19:00:00 2019-12-30 19:43:48.114 - [34mdebug[39m: heatingcontrol.0 (8950) [INFO] status = true next event: 31 Dec 2019 00:00:00 2019-12-30 19:43:48.115 - [34mdebug[39m: heatingcontrol.0 (8950) [INFO] status = true next event: 31 Dec 2019 12:00:00 2019-12-30 19:43:48.116 - [34mdebug[39m: heatingcontrol.0 (8950) [INFO] status = true next event: 31 Dec 2019 16:00:00 2019-12-30 19:43:48.117 - [34mdebug[39m: heatingcontrol.0 (8950) [INFO] status = true next event: 4 Jan 2020 05:00:00 2019-12-30 19:43:48.117 - [34mdebug[39m: heatingcontrol.0 (8950) [INFO] status = true next event: 4 Jan 2020 12:00:00 2019-12-30 19:43:48.119 - [34mdebug[39m: heatingcontrol.0 (8950) [INFO] status = true next event: 4 Jan 2020 16:00:00 2019-12-30 19:44:08.370 - [34mdebug[39m: heatingcontrol.0 (8950) ### handle state change hm-rpc.0.OEQ1711111.4.ACTUAL_TEMPERATURE {"val":20.9,"ack":true,"ts":1577731448369,"q":0,"from":"system.adapter.hm-rpc.0","user":"system.user.admin","lc":1577731448369} 2019-12-30 19:44:08.370 - [34mdebug[39m: heatingcontrol.0 (8950) ### hm-rpc.0.OEQ1711111.4.ACTUAL_TEMPERATURE mihome.0.devices.magnet_158d0001de8c5e.state 20.9 true 2019-12-30 19:44:08.371 - [34mdebug[39m: heatingcontrol.0 (8950) ### handle state change hm-rpc.0.OEQ1711111.4.SET_TEMPERATURE {"val":16,"ack":true,"ts":1577731448369,"q":0,"from":"system.adapter.hm-rpc.0","user":"system.user.admin","lc":1577705436500} 2019-12-30 19:44:08.371 - [34mdebug[39m: heatingcontrol.0 (8950) ### hm-rpc.0.OEQ1711111.4.SET_TEMPERATURE hm-rpc.0.OEQ1711111.4.ACTUAL_TEMPERATURE 16 20.9 2019-12-30 19:44:08.371 - [34mdebug[39m: heatingcontrol.0 (8950) ### 111 not handled yet 2019-12-30 19:44:08.371 - [34mdebug[39m: heatingcontrol.0 (8950) handle id hm-rpc.0.OEQ1711111.4.ACTUAL_TEMPERATURE state {"val":20.9,"ack":true,"ts":1577731448369,"q":0,"from":"system.adapter.hm-rpc.0","user":"system.user.admin","lc":1577731448369} 2019-12-30 19:44:08.371 - [34mdebug[39m: heatingcontrol.0 (8950) ### handle devices [{"id":12,"name":"HM-CC-RT-DN OEQ1711111","OID_Current":"hm-rpc.0.OEQ1711111.4.ACTUAL_TEMPERATURE","OID_Target":"hm-rpc.0.OEQ1711111.4.SET_TEMPERATURE","isActive":true,"type":1,"room":"Kinderschlafzimmer"}] 2019-12-30 19:44:08.371 - [34mdebug[39m: heatingcontrol.0 (8950) ### 111 not handled yetDie Absenkung scheint auch in den anderen Räumen nicht zu funktionieren. Habe es grade mal in einem anderen Zimmer versucht.
@Rene_HM kannst du hier auch nochmal kurz schauen, ist evtl untergegangen. Leider funktioniert grade gar keine Absenkung bei Fenster offen
-
@moppel2810 sagte in Test Adapter HeatingControl v0.3.x:
Ich verzweifel hier bald bei der Suche
Das bekommen wir schon hin...
Zuerst müssen wir das hier beseitigen:exception in main [invalid id ""]Ich denke, du hast irgendeinen Aktor falsch konfiguriert. Erste Frage: benötigst du überhaupt Aktoren? Aktoren sind eigentlich ein Sonderfall hier... Wenn nicht, dann schalte UseActors im admin aus...
-
@martinschm sagte in Test Adapter HeatingControl v0.3.x:
ist evtl untergegangen
nein, das habe ich noch auf dem Schirm. Ich verstehe hier leider nur noch nicht, was hier schief läuft. Da bin ich noch am suchen...
Welche Version vom adapter läuft eigentlich bei dir? -
@Rene_HM so jetzt sieht der debug nach Neustart so aus.
heatingcontrol.0 2019-12-31 11:19:45.513 debug (4204) #subscribtion finished heatingcontrol.0 2019-12-31 11:19:45.513 info (4204) subscribe Küche deconz.0.Sensors.24.open heatingcontrol.0 2019-12-31 11:19:45.512 info (4204) subscribe Küche hm-rpc.1.0007D5699E9605.1.STATE heatingcontrol.0 2019-12-31 11:19:45.512 info (4204) subscribe Wohnzimmer deconz.0.Sensors.21.open heatingcontrol.0 2019-12-31 11:19:45.511 info (4204) subscribe Wohnzimmer deconz.0.Sensors.20.open heatingcontrol.0 2019-12-31 11:19:45.511 info (4204) subscribe Wohnzimmer deconz.0.Sensors.19.open heatingcontrol.0 2019-12-31 11:19:45.510 info (4204) subscribe Wohnzimmer deconz.0.Sensors.18.open heatingcontrol.0 2019-12-31 11:19:45.510 info (4204) subscribe Wohnzimmer deconz.0.Sensors.17.open heatingcontrol.0 2019-12-31 11:19:45.509 info (4204) subscribe Wohnzimmer deconz.0.Sensors.16.open heatingcontrol.0 2019-12-31 11:19:45.509 info (4204) subscribe Wohnzimmer deconz.0.Sensors.15.open heatingcontrol.0 2019-12-31 11:19:45.508 info (4204) subscribe Badezimmer hm-rpc.1.0000D56996187D.1.STATE heatingcontrol.0 2019-12-31 11:19:45.507 info (4204) subscribe Arbeitszimmer deconz.0.Sensors.23.open heatingcontrol.0 2019-12-31 11:19:45.507 info (4204) subscribe Arbeitszimmer deconz.0.Sensors.11.open heatingcontrol.0 2019-12-31 11:19:45.507 debug (4204) device not active heatingcontrol.0 2019-12-31 11:19:45.506 debug (4204) no subscribe Path2PartyNowDP heatingcontrol.0 2019-12-31 11:19:45.506 debug (4204) no subscribe Path2GuestsPresentDP heatingcontrol.0 2019-12-31 11:19:45.506 debug (4204) no subscribe Path2HolidayPresentDP heatingcontrol.0 2019-12-31 11:19:45.506 debug (4204) no subscribe Path2VacationDP heatingcontrol.0 2019-12-31 11:19:45.506 info (4204) subscribe javascript.0.scriptEnabled.Anwesenheit.An_Abwesenheit heatingcontrol.0 2019-12-31 11:19:45.505 info (4204) subscribe feiertage.0.heute.boolean heatingcontrol.0 2019-12-31 11:19:45.498 debug (4204) #start subscribtion heatingcontrol.0 2019-12-31 11:19:45.497 debug (4204) [INFO] status = true next event: 4 Jan 2020 20:00:00 heatingcontrol.0 2019-12-31 11:19:45.477 debug (4204) [INFO] status = true next event: 4 Jan 2020 15:00:00 heatingcontrol.0 2019-12-31 11:19:45.476 debug (4204) [INFO] status = true next event: 4 Jan 2020 11:00:00 heatingcontrol.0 2019-12-31 11:19:45.475 debug (4204) [INFO] status = true next event: 4 Jan 2020 07:00:00 heatingcontrol.0 2019-12-31 11:19:45.472 debug (4204) [INFO] status = true next event: 4 Jan 2020 04:00:00 heatingcontrol.0 2019-12-31 11:19:45.470 debug (4204) [INFO] status = true next event: 31 Dec 2019 20:00:00 heatingcontrol.0 2019-12-31 11:19:45.469 debug (4204) [INFO] status = true next event: 31 Dec 2019 15:00:00 heatingcontrol.0 2019-12-31 11:19:45.469 debug (4204) [INFO] status = true next event: 31 Dec 2019 11:00:00 heatingcontrol.0 2019-12-31 11:19:45.468 debug (4204) [INFO] status = true next event: 1 Jan 2020 07:00:00 heatingcontrol.0 2019-12-31 11:19:45.465 debug (4204) [INFO] status = true next event: 1 Jan 2020 04:00:00 heatingcontrol.0 2019-12-31 11:19:45.448 debug (4204) thermostat hm-rpc.1.000A97099C1E52.1.SET_POINT_TEMPERATURE nothing to do, already 21 heatingcontrol.0 2019-12-31 11:19:45.440 info (4204) room Wohnzimmer Thermostat Fußbodenheizung Wohnzimmer.SET_POINT_TEMPERATURE target is 21 heatingcontrol.0 2019-12-31 11:19:45.440 debug (4204) ### new target temp21 heatingcontrol.0 2019-12-31 11:19:45.440 debug (4204) ### current > 1 1 2 heatingcontrol.0 2019-12-31 11:19:45.439 debug (4204) Wohnzimmer found period 1 with 21 on 08,00 heatingcontrol.0 2019-12-31 11:19:45.437 debug (4204) check ID Profiles.0.Wohnzimmer.Sa-So.Periods.4.time heatingcontrol.0 2019-12-31 11:19:45.432 debug (4204) check ID Profiles.0.Wohnzimmer.Sa-So.Periods.3.time heatingcontrol.0 2019-12-31 11:19:45.427 debug (4204) check ID Profiles.0.Wohnzimmer.Sa-So.Periods.2.time heatingcontrol.0 2019-12-31 11:19:45.427 debug (4204) check time for Wohnzimmer Profiles.0.Wohnzimmer.Sa-So.Periods.1.time 21 heatingcontrol.0 2019-12-31 11:19:45.421 debug (4204) check ID Profiles.0.Wohnzimmer.Sa-So.Periods.1.time heatingcontrol.0 2019-12-31 11:19:45.421 debug (4204) check time for Wohnzimmer Profiles.0.Wohnzimmer.Sa-So.Periods.0.time 17 heatingcontrol.0 2019-12-31 11:19:45.417 debug (4204) check ID Profiles.0.Wohnzimmer.Sa-So.Periods.0.time heatingcontrol.0 2019-12-31 11:19:45.416 debug (4204) FindNextPeriod for 12/31/2019, 10:19:45 AM in Wohnzimmer heatingcontrol.0 2019-12-31 11:19:45.415 debug (4204) check room Wohnzimmer heatingcontrol.0 2019-12-31 11:19:45.363 debug (4204) thermostat hm-rpc.1.000A17098D4CEA.1.SET_POINT_TEMPERATURE nothing to do, already 21 heatingcontrol.0 2019-12-31 11:19:45.359 info (4204) room Küche Thermostat Heizung Küche.SET_POINT_TEMPERATURE target is 21 heatingcontrol.0 2019-12-31 11:19:45.358 debug (4204) ### new target temp21 heatingcontrol.0 2019-12-31 11:19:45.358 debug (4204) ### current > 1 1 2 heatingcontrol.0 2019-12-31 11:19:45.358 debug (4204) Küche found period 1 with 21 on 08,00 heatingcontrol.0 2019-12-31 11:19:45.356 debug (4204) check ID Profiles.0.Küche.Sa-So.Periods.4.time heatingcontrol.0 2019-12-31 11:19:45.355 debug (4204) check ID Profiles.0.Küche.Sa-So.Periods.3.time heatingcontrol.0 2019-12-31 11:19:45.352 debug (4204) check ID Profiles.0.Küche.Sa-So.Periods.2.time heatingcontrol.0 2019-12-31 11:19:45.352 debug (4204) check time for Küche Profiles.0.Küche.Sa-So.Periods.1.time 21 heatingcontrol.0 2019-12-31 11:19:45.340 debug (4204) check ID Profiles.0.Küche.Sa-So.Periods.1.time heatingcontrol.0 2019-12-31 11:19:45.340 debug (4204) check time for Küche Profiles.0.Küche.Sa-So.Periods.0.time 17 heatingcontrol.0 2019-12-31 11:19:45.335 debug (4204) check ID Profiles.0.Küche.Sa-So.Periods.0.time heatingcontrol.0 2019-12-31 11:19:45.335 debug (4204) FindNextPeriod for 12/31/2019, 10:19:45 AM in Küche heatingcontrol.0 2019-12-31 11:19:45.334 debug (4204) check room Küche heatingcontrol.0 2019-12-31 10:19:45.287 debug 2 heatingcontrol.0 2019-12-31 10:19:45.287 debug (4204) check ID Profiles.0.Arbeitszimmer.Sa-So.Periods.4.time heatingcontrol.0 2019-12-31 10:19:45.283 debug (4204) check ID Profiles.0.Arbeitszimmer.Sa-So.Periods.3.time heatingcontrol.0 2019-12-31 10:19:45.281 debug (4204) check ID Profiles.0.Arbeitszimmer.Sa-So.Periods.2.time heatingcontrol.0 2019-12-31 10:19:45.280 debug (4204) check time for Arbeitszimmer Profiles.0.Arbeitszimmer.Sa-So.Periods.1.time 21 heatingcontrol.0 2019-12-31 10:19:45.278 debug (4204) check ID Profiles.0.Arbeitszimmer.Sa-So.Periods.1.time heatingcontrol.0 2019-12-31 10:19:45.276 debug (4204) check time for Arbeitszimmer Profiles.0.Arbeitszimmer.Sa-So.Periods.0.time 17 heatingcontrol.0 2019-12-31 10:19:45.269 debug (4204) check ID Profiles.0.Arbeitszimmer.Sa-So.Periods.0.time heatingcontrol.0 2019-12-31 10:19:45.269 debug (4204) FindNextPeriod for 12/31/2019, 10:19:45 AM in Arbeitszimmer heatingcontrol.0 2019-12-31 10:19:45.262 debug (4204) check room Arbeitszimmer heatingcontrol.0 2019-12-31 10:19:45.262 debug (4204) profile 0 heatingcontrol.0 2019-12-31 10:19:45.260 debug (4204) get profile heatingcontrol.0 2019-12-31 10:19:45.260 debug (4204) profile type 2 heatingcontrol.0 2019-12-31 10:19:45.252 info (4204) calculating new target temperatures heatingcontrol.0 2019-12-31 10:19:45.251 info (4204) external states checked, done heatingcontrol.0 2019-12-31 10:19:45.249 debug (4204) checking Path2HolidayPresentDP heatingcontrol.0 2019-12-31 10:19:45.248 debug (4204) checking Path2PartyNowDP heatingcontrol.0 2019-12-31 10:19:45.245 debug (4204) checking Path2GuestsPresentDP heatingcontrol.0 2019-12-31 10:19:45.244 debug (4204) checking Path2VacationDP heatingcontrol.0 2019-12-31 10:19:45.240 info (4204) setting Present to true heatingcontrol.0 2019-12-31 10:19:45.239 debug (4204) got Present (1) {"val":true,"ack":true,"ts":1577726419908,"q":0,"from":"system.adapter.javascript.0","user":"system.user.admin","lc":1577726419858} heatingcontrol.0 2019-12-31 10:19:45.237 debug (4204) checking Path2PresentDP heatingcontrol.0 2019-12-31 10:19:45.232 info (4204) setting PublicHolidyToday to true heatingcontrol.0 2019-12-31 10:19:45.229 debug (4204) checking Path2FeiertagAdapter heatingcontrol.0 2019-12-31 10:19:45.228 info (4204) checking all external states heatingcontrol.0 2019-12-31 10:19:45.223 debug (4204) got sensor state {"val":false,"ack":true,"ts":1577717574990,"q":0,"from":"system.adapter.deconz.0","user":"system.user.admin","lc":1576933362844} from deconz.0.Sensors.21.open heatingcontrol.0 2019-12-31 10:19:45.220 debug (4204) got sensor state {"val":false,"ack":true,"ts":1577717574989,"q":0,"from":"system.adapter.deconz.0","user":"system.user.admin","lc":1577638441163} from deconz.0.Sensors.20.open heatingcontrol.0 2019-12-31 10:19:45.217 debug (4204) got sensor state {"val":false,"ack":true,"ts":1577717574989,"q":0,"from":"system.adapter.deconz.0","user":"system.user.admin","lc":1576933207327} from deconz.0.Sensors.19.open heatingcontrol.0 2019-12-31 10:19:45.210 debug (4204) got sensor state {"val":false,"ack":true,"ts":1577717574987,"q":0,"from":"system.adapter.deconz.0","user":"system.user.admin","lc":1576933122635} from deconz.0.Sensors.18.open heatingcontrol.0 2019-12-31 10:19:45.209 debug (4204) got sensor state {"val":false,"ack":true,"ts":1577717574976,"q":0,"from":"system.adapter.deconz.0","user":"system.user.admin","lc":1576933025797} from deconz.0.Sensors.17.open heatingcontrol.0 2019-12-31 10:19:45.205 debug (4204) got sensor state {"val":false,"ack":true,"ts":1577717574976,"q":0,"from":"system.adapter.deconz.0","user":"system.user.admin","lc":1576932905933} from deconz.0.Sensors.16.open heatingcontrol.0 2019-12-31 10:19:45.203 debug (4204) got sensor state {"val":false,"ack":true,"ts":1577717574976,"q":0,"from":"system.adapter.deconz.0","user":"system.user.admin","lc":1577007719646} from deconz.0.Sensors.15.open heatingcontrol.0 2019-12-31 10:19:45.201 debug (4204) Check sensors for Wohnzimmer heatingcontrol.0 2019-12-31 10:19:45.196 debug (4204) got sensor state {"val":false,"ack":true,"ts":1577717574990,"q":0,"from":"system.adapter.deconz.0","user":"system.user.admin","lc":1577644284922} from deconz.0.Sensors.24.open heatingcontrol.0 2019-12-31 10:19:45.195 debug (4204) got sensor state {"val":0,"ack":true,"ts":1577786742689,"q":0,"from":"system.adapter.hm-rpc.1","user":"system.user.admin","lc":1577786742689} from hm-rpc.1.0007D5699E9605.1.STATE heatingcontrol.0 2019-12-31 10:19:45.192 debug (4204) Check sensors for Küche heatingcontrol.0 2019-12-31 10:19:45.186 debug (4204) got sensor state {"val":0,"ack":true,"ts":1577785259127,"q":0,"from":"system.adapter.hm-rpc.1","user":"system.user.admin","lc":1577628013202} from hm-rpc.1.0000D56996187D.1.STATE heatingcontrol.0 2019-12-31 10:19:45.184 debug (4204) Check sensors for Badezimmer heatingcontrol.0 2019-12-31 10:19:45.179 debug (4204) got sensor state {"val":false,"ack":true,"ts":1577717574990,"q":0,"from":"system.adapter.deconz.0","user":"system.user.admin","lc":1577705276875} from deconz.0.Sensors.23.open heatingcontrol.0 2019-12-31 10:19:45.176 debug (4204) got sensor state {"val":false,"ack":true,"ts":1577717574976,"q":0,"from":"system.adapter.deconz.0","user":"system.user.admin","lc":1576925832752} from deconz.0.Sensors.11.open heatingcontrol.0 2019-12-31 10:19:45.157 debug (4204) Check sensors for Arbeitszimmer heatingcontrol.0 2019-12-31 10:19:45.156 debug (4204) [INFO] status = true next event: 4 Jan 2020 20:00:00 heatingcontrol.0 2019-12-31 10:19:45.155 debug (4204) [INFO] status = true next event: 4 Jan 2020 15:00:00 heatingcontrol.0 2019-12-31 10:19:45.154 debug (4204) [INFO] status = true next event: 4 Jan 2020 11:00:00 heatingcontrol.0 2019-12-31 10:19:45.153 debug (4204) [INFO] status = true next event: 4 Jan 2020 07:00:00 heatingcontrol.0 2019-12-31 10:19:45.152 debug (4204) [INFO] status = true next event: 4 Jan 2020 04:00:00 heatingcontrol.0 2019-12-31 10:19:45.151 debug (4204) [INFO] status = true next event: 31 Dec 2019 20:00:00 heatingcontrol.0 2019-12-31 10:19:45.151 debug (4204) [INFO] status = true next event: 31 Dec 2019 15:00:00 heatingcontrol.0 2019-12-31 10:19:45.150 debug (4204) [INFO] status = true next event: 31 Dec 2019 11:00:00 heatingcontrol.0 2019-12-31 10:19:45.150 debug (4204) [INFO] status = true next event: 1 Jan 2020 07:00:00 heatingcontrol.0 2019-12-31 10:19:45.147 debug (4204) [INFO] status = true next event: 1 Jan 2020 04:00:00 heatingcontrol.0 2019-12-31 10:19:45.134 debug (4204) create cron job #9 at 21:0 string: 0 0 21 * * 0,6 Europe/Berlin heatingcontrol.0 2019-12-31 10:19:45.132 debug (4204) create cron job #8 at 16:0 string: 0 0 16 * * 0,6 Europe/Berlin heatingcontrol.0 2019-12-31 10:19:45.129 debug (4204) create cron job #7 at 12:0 string: 0 0 12 * * 0,6 Europe/Berlin heatingcontrol.0 2019-12-31 10:19:45.127 debug (4204) create cron job #6 at 8:0 string: 0 0 8 * * 0,6 Europe/Berlin heatingcontrol.0 2019-12-31 10:19:45.120 debug (4204) create cron job #5 at 5:0 string: 0 0 5 * * 0,6 Europe/Berlin heatingcontrol.0 2019-12-31 10:19:45.117 debug (4204) create cron job #4 at 21:0 string: 0 0 21 * * 1-5 Europe/Berlin heatingcontrol.0 2019-12-31 10:19:45.115 debug (4204) create cron job #3 at 16:0 string: 0 0 16 * * 1-5 Europe/Berlin heatingcontrol.0 2019-12-31 10:19:45.110 debug (4204) create cron job #2 at 12:0 string: 0 0 12 * * 1-5 Europe/Berlin heatingcontrol.0 2019-12-31 10:19:45.099 debug (4204) create cron job #1 at 8:0 string: 0 0 8 * * 1-5 Europe/Berlin heatingcontrol.0 2019-12-31 10:19:45.078 debug (4204) create cron job #0 at 5:0 string: 0 0 5 * * 1-5 Europe/Berlin heatingcontrol.0 2019-12-31 10:19:45.078 debug (4204) ---2 found time for Wohnzimmer at {"val":"21:00","ack":true,"ts":1577378276535,"q":0,"from":"system.adapter.heatingcontrol.0","user":"system.user.admin","lc":1577378276535} 21:00 heatingcontrol.0 2019-12-31 10:19:45.075 debug (4204) ---2 found time for Wohnzimmer at {"val":"16:00","ack":true,"ts":1577378276535,"q":0,"from":"system.adapter.heatingcontrol.0","user":"system.user.admin","lc":1577378276535} 16:00 heatingcontrol.0 2019-12-31 10:19:45.072 debug (4204) ---2 found time for Wohnzimmer at {"val":"12:00","ack":true,"ts":1577378276535,"q":0,"from":"system.adapter.heatingcontrol.0","user":"system.user.admin","lc":1577378276535} 12:00 heatingcontrol.0 2019-12-31 10:19:45.070 debug (4204) ---2 found time for Wohnzimmer at {"val":"08:00","ack":true,"ts":1577378276535,"q":0,"from":"system.adapter.heatingcontrol.0","user":"system.user.admin","lc":1577378276535} 08:00 heatingcontrol.0 2019-12-31 10:19:45.067 debug (4204) ---2 found time for Wohnzimmer at {"val":"05:00","ack":true,"ts":1577378276535,"q":0,"from":"system.adapter.heatingcontrol.0","user":"system.user.admin","lc":1577378276535} 05:00 heatingcontrol.0 2019-12-31 10:19:45.062 debug (4204) setting Sa - Su heatingcontrol.0 2019-12-31 10:19:45.062 debug (4204) ---1 found time for Wohnzimmer at {"val":"21:00","ack":true,"ts":1577378276535,"q":0,"from":"system.adapter.heatingcontrol.0","user":"system.user.admin","lc":1577378276535} 21:00 heatingcontrol.0 2019-12-31 10:19:45.060 debug (4204) ---1 found time for Wohnzimmer at {"val":"16:00","ack":true,"ts":1577378276535,"q":0,"from":"system.adapter.heatingcontrol.0","user":"system.user.admin","lc":1577378276535} 16:00 heatingcontrol.0 2019-12-31 10:19:45.059 debug (4204) ---1 found time for Wohnzimmer at {"val":"12:00","ack":false,"ts":1577542409214,"q":0,"from":"system.adapter.web.0","user":"system.user.admin","lc":1577542409214} 12:00 heatingcontrol.0 2019-12-31 10:19:45.057 debug (4204) ---1 found time for Wohnzimmer at {"val":"08:00","ack":true,"ts":1577378276535,"q":0,"from":"system.adapter.heatingcontrol.0","user":"system.user.admin","lc":1577378276535} 08:00 heatingcontrol.0 2019-12-31 10:19:45.055 debug (4204) ---1 found time for Wohnzimmer at {"val":"05:00","ack":true,"ts":1577378276535,"q":0,"from":"system.adapter.heatingcontrol.0","user":"system.user.admin","lc":1577378276535} 05:00 heatingcontrol.0 2019-12-31 10:19:45.052 debug (4204) setting Mo - Fr heatingcontrol.0 2019-12-31 10:19:45.051 debug (4204) ---2 found time for Küche at {"val":"21:00","ack":true,"ts":1577378276535,"q":0,"from":"system.adapter.heatingcontrol.0","user":"system.user.admin","lc":1577378276535} 21:00 heatingcontrol.0 2019-12-31 10:19:45.049 debug (4204) ---2 found time for Küche at {"val":"16:00","ack":true,"ts":1577378276535,"q":0,"from":"system.adapter.heatingcontrol.0","user":"system.user.admin","lc":1577378276535} 16:00 heatingcontrol.0 2019-12-31 10:19:45.047 debug (4204) ---2 found time for Küche at {"val":"12:00","ack":true,"ts":1577378276534,"q":0,"from":"system.adapter.heatingcontrol.0","user":"system.user.admin","lc":1577378276534} 12:00 heatingcontrol.0 2019-12-31 10:19:45.036 debug (4204) ---2 found time for Küche at {"val":"08:00","ack":true,"ts":1577378276534,"q":0,"from":"system.adapter.heatingcontrol.0","user":"system.user.admin","lc":1577378276534} 08:00 heatingcontrol.0 2019-12-31 10:19:45.031 debug (4204) ---2 found time for Küche at {"val":"05:00","ack":true,"ts":1577378276534,"q":0,"from":"system.adapter.heatingcontrol.0","user":"system.user.admin","lc":1577378276534} 05:00 heatingcontrol.0 2019-12-31 10:19:45.028 debug (4204) setting Sa - Su heatingcontrol.0 2019-12-31 10:19:45.028 debug (4204) ---1 found time for Küche at {"val":"21:00","ack":true,"ts":1577378276534,"q":0,"from":"system.adapter.heatingcontrol.0","user":"system.user.admin","lc":1577378276534} 21:00 heatingcontrol.0 2019-12-31 10:19:45.021 debug (4204) ---1 found time for Küche at {"val":"16:00","ack":true,"ts":1577378276534,"q":0,"from":"system.adapter.heatingcontrol.0","user":"system.user.admin","lc":1577378276534} 16:00 heatingcontrol.0 2019-12-31 10:19:45.019 debug (4204) ---1 found time for Küche at {"val":"12:00","ack":true,"ts":1577378276534,"q":0,"from":"system.adapter.heatingcontrol.0","user":"system.user.admin","lc":1577378276534} 12:00 heatingcontrol.0 2019-12-31 10:19:45.018 debug (4204) ---1 found time for Küche at {"val":"08:00","ack":true,"ts":1577378276534,"q":0,"from":"system.adapter.heatingcontrol.0","user":"system.user.admin","lc":1577378276534} 08:00 heatingcontrol.0 2019-12-31 10:19:45.017 debug (4204) ---1 found time for Küche at {"val":"05:00","ack":true,"ts":1577378276534,"q":0,"from":"system.adapter.heatingcontrol.0","user":"system.user.admin","lc":1577378276534} 05:00 heatingcontrol.0 2019-12-31 10:19:45.011 debug (4204) setting Mo - Fr heatingcontrol.0 2019-12-31 10:19:45.011 debug (4204) ---2 found time for Badezimmer at {"val":"21:00","ack":true,"ts":1577378276534,"q":0,"from":"system.adapter.heatingcontrol.0","user":"system.user.admin","lc":1577378276534} 21:00 heatingcontrol.0 2019-12-31 10:19:45.010 debug (4204) ---2 found time for Badezimmer at {"val":"16:00","ack":true,"ts":1577378276534,"q":0,"from":"system.adapter.heatingcontrol.0","user":"system.user.admin","lc":1577378276534} 16:00 heatingcontrol.0 2019-12-31 10:19:45.009 debug (4204) ---2 found time for Badezimmer at {"val":"12:00","ack":true,"ts":1577378276534,"q":0,"from":"system.adapter.heatingcontrol.0","user":"system.user.admin","lc":1577378276534} 12:00 heatingcontrol.0 2019-12-31 10:19:45.007 debug (4204) ---2 found time for Badezimmer at {"val":"08:00","ack":true,"ts":1577378276534,"q":0,"from":"system.adapter.heatingcontrol.0","user":"system.user.admin","lc":1577378276534} 08:00 heatingcontrol.0 2019-12-31 10:19:45.004 debug (4204) ---2 found time for Badezimmer at {"val":"05:00","ack":true,"ts":1577378276534,"q":0,"from":"system.adapter.heatingcontrol.0","user":"system.user.admin","lc":1577378276534} 05:00 heatingcontrol.0 2019-12-31 10:19:44.996 debug (4204) setting Sa - Su heatingcontrol.0 2019-12-31 10:19:44.996 debug (4204) ---1 found time for Badezimmer at {"val":"21:00","ack":true,"ts":1577378276534,"q":0,"from":"system.adapter.heatingcontrol.0","user":"system.user.admin","lc":1577378276534} 21:00 heatingcontrol.0 2019-12-31 10:19:44.993 debug (4204) ---1 found time for Badezimmer at {"val":"16:00","ack":true,"ts":1577378276534,"q":0,"from":"system.adapter.heatingcontrol.0","user":"system.user.admin","lc":1577378276534} 16:00 heatingcontrol.0 2019-12-31 10:19:44.988 debug (4204) ---1 found time for Badezimmer at {"val":"12:00","ack":true,"ts":1577378276534,"q":0,"from":"system.adapter.heatingcontrol.0","user":"system.user.admin","lc":1577378276534} 12:00 heatingcontrol.0 2019-12-31 10:19:44.987 debug (4204) ---1 found time for Badezimmer at {"val":"08:00","ack":true,"ts":1577378276534,"q":0,"from":"system.adapter.heatingcontrol.0","user":"system.user.admin","lc":1577378276534} 08:00 heatingcontrol.0 2019-12-31 10:19:44.986 debug (4204) ---1 found time for Badezimmer at {"val":"05:00","ack":true,"ts":1577378276534,"q":0,"from":"system.adapter.heatingcontrol.0","user":"system.user.admin","lc":1577378276534} 05:00 heatingcontrol.0 2019-12-31 10:19:44.985 debug (4204) setting Mo - Fr heatingcontrol.0 2019-12-31 10:19:44.985 debug (4204) push to list = 21,00 heatingcontrol.0 2019-12-31 10:19:44.985 debug (4204) ---2 found time for Arbeitszimmer at {"val":"21:00","ack":true,"ts":1577378276534,"q":0,"from":"system.adapter.heatingcontrol.0","user":"system.user.admin","lc":1577378276534} 21:00 heatingcontrol.0 2019-12-31 10:19:44.983 debug (4204) push to list = 16,00 heatingcontrol.0 2019-12-31 10:19:44.982 debug (4204) ---2 found time for Arbeitszimmer at {"val":"16:00","ack":true,"ts":1577378276534,"q":0,"from":"system.adapter.heatingcontrol.0","user":"system.user.admin","lc":1577378276534} 16:00 heatingcontrol.0 2019-12-31 10:19:44.974 debug (4204) push to list = 12,00 heatingcontrol.0 2019-12-31 10:19:44.974 debug (4204) ---2 found time for Arbeitszimmer at {"val":"12:00","ack":true,"ts":1577378276534,"q":0,"from":"system.adapter.heatingcontrol.0","user":"system.user.admin","lc":1577378276534} 12:00 heatingcontrol.0 2019-12-31 10:19:44.963 debug (4204) push to list = 08,00 heatingcontrol.0 2019-12-31 10:19:44.962 debug (4204) ---2 found time for Arbeitszimmer at {"val":"08:00","ack":true,"ts":1577378276534,"q":0,"from":"system.adapter.heatingcontrol.0","user":"system.user.admin","lc":1577378276534} 08:00 heatingcontrol.0 2019-12-31 10:19:44.943 debug (4204) push to list = 05,00 heatingcontrol.0 2019-12-31 10:19:44.943 debug (4204) ---2 found time for Arbeitszimmer at {"val":"05:00","ack":true,"ts":1577378276534,"q":0,"from":"system.adapter.heatingcontrol.0","user":"system.user.admin","lc":1577378276534} 05:00 heatingcontrol.0 2019-12-31 10:19:44.942 debug (4204) setting Sa - Su heatingcontrol.0 2019-12-31 10:19:44.942 debug (4204) push to list = 21,00 heatingcontrol.0 2019-12-31 10:19:44.942 debug (4204) ---1 found time for Arbeitszimmer at {"val":"21:00","ack":true,"ts":1577378276534,"q":0,"from":"system.adapter.heatingcontrol.0","user":"system.user.admin","lc":1577378276534} 21:00 heatingcontrol.0 2019-12-31 10:19:44.941 debug (4204) push to list = 16,00 heatingcontrol.0 2019-12-31 10:19:44.940 debug (4204) ---1 found time for Arbeitszimmer at {"val":"16:00","ack":true,"ts":1577378276534,"q":0,"from":"system.adapter.heatingcontrol.0","user":"system.user.admin","lc":1577378276534} 16:00 heatingcontrol.0 2019-12-31 10:19:44.932 debug (4204) push to list = 12,00 heatingcontrol.0 2019-12-31 10:19:44.931 debug (4204) ---1 found time for Arbeitszimmer at {"val":"12:00","ack":true,"ts":1577378276534,"q":0,"from":"system.adapter.heatingcontrol.0","user":"system.user.admin","lc":1577378276534} 12:00 heatingcontrol.0 2019-12-31 10:19:44.930 debug (4204) push to list = 08,00 heatingcontrol.0 2019-12-31 10:19:44.930 debug (4204) ---1 found time for Arbeitszimmer at {"val":"08:00","ack":true,"ts":1577378276534,"q":0,"from":"system.adapter.heatingcontrol.0","user":"system.user.admin","lc":1577378276534} 08:00 heatingcontrol.0 2019-12-31 10:19:44.921 debug (4204) push to list = 05,00 heatingcontrol.0 2019-12-31 10:19:44.920 debug (4204) ---1 found time for Arbeitszimmer at {"val":"05:00","ack":true,"ts":1577378276534,"q":0,"from":"system.adapter.heatingcontrol.0","user":"system.user.admin","lc":1577378276534} 05:00 heatingcontrol.0 2019-12-31 10:19:44.919 debug (4204) setting Mo - Fr heatingcontrol.0 2019-12-31 10:19:44.919 debug (4204) profile 0 heatingcontrol.0 2019-12-31 10:19:44.909 debug (4204) get profile heatingcontrol.0 2019-12-31 10:19:44.909 debug (4204) start CalculateNextTime, profile type 2 heatingcontrol.0 2019-12-31 10:19:44.908 debug (4204) system date format DD.MM.YYYY heatingcontrol.0 2019-12-31 10:19:44.885 debug (4204) CreateDatepoints done heatingcontrol.0 2019-12-31 10:19:44.885 debug (4204) not active.... Kinderzimmer heatingcontrol.0 2019-12-31 10:19:44.885 debug (4204) not active.... Schlafzimmer heatingcontrol.0 2019-12-31 10:19:44.885 debug (4204) add state Profiles.0.Wohnzimmer.Sa-So.Periods.4 max 5 heatingcontrol.0 2019-12-31 10:19:44.885 debug (4204) add state Profiles.0.Wohnzimmer.Sa-So.Periods.3 max 5 heatingcontrol.0 2019-12-31 10:19:44.885 debug (4204) add state Profiles.0.Wohnzimmer.Sa-So.Periods.2 max 5 heatingcontrol.0 2019-12-31 10:19:44.885 debug (4204) add state Profiles.0.Wohnzimmer.Sa-So.Periods.1 max 5 heatingcontrol.0 2019-12-31 10:19:44.884 debug (4204) add state Profiles.0.Wohnzimmer.Sa-So.Periods.0 max 5 heatingcontrol.0 2019-12-31 10:19:44.884 debug (4204) add state Profiles.0.Wohnzimmer.Mo-Fr.Periods.4 max 5 heatingcontrol.0 2019-12-31 10:19:44.884 debug (4204) add state Profiles.0.Wohnzimmer.Mo-Fr.Periods.3 max 5 heatingcontrol.0 2019-12-31 10:19:44.884 debug (4204) add state Profiles.0.Wohnzimmer.Mo-Fr.Periods.2 max 5 heatingcontrol.0 2019-12-31 10:19:44.884 debug (4204) add state Profiles.0.Wohnzimmer.Mo-Fr.Periods.1 max 5 heatingcontrol.0 2019-12-31 10:19:44.883 debug (4204) add state Profiles.0.Wohnzimmer.Mo-Fr.Periods.0 max 5 heatingcontrol.0 2019-12-31 10:19:44.883 debug (4204) Profile Type Mo-FR + Sa-So, profiles 1 heatingcontrol.0 2019-12-31 10:19:44.883 debug (4204) room Wohnzimmer with 5 periods heatingcontrol.0 2019-12-31 10:19:44.673 debug (4204) create data profile points (absolute) for Wohnzimmer heatingcontrol.0 2019-12-31 10:19:44.670 debug (4204) add state Profiles.0.Küche.Sa-So.Periods.4 max 5 heatingcontrol.0 2019-12-31 10:19:44.670 debug (4204) add state Profiles.0.Küche.Sa-So.Periods.3 max 5 heatingcontrol.0 2019-12-31 10:19:44.670 debug (4204) add state Profiles.0.Küche.Sa-So.Periods.2 max 5 heatingcontrol.0 2019-12-31 10:19:44.670 debug (4204) add state Profiles.0.Küche.Sa-So.Periods.1 max 5 heatingcontrol.0 2019-12-31 10:19:44.670 debug (4204) add state Profiles.0.Küche.Sa-So.Periods.0 max 5 heatingcontrol.0 2019-12-31 10:19:44.670 debug (4204) add state Profiles.0.Küche.Mo-Fr.Periods.4 max 5 heatingcontrol.0 2019-12-31 10:19:44.669 debug (4204) add state Profiles.0.Küche.Mo-Fr.Periods.3 max 5 heatingcontrol.0 2019-12-31 10:19:44.667 debug (4204) add state Profiles.0.Küche.Mo-Fr.Periods.2 max 5 heatingcontrol.0 2019-12-31 10:19:44.667 debug (4204) add state Profiles.0.Küche.Mo-Fr.Periods.1 max 5 heatingcontrol.0 2019-12-31 10:19:44.665 debug (4204) add state Profiles.0.Küche.Mo-Fr.Periods.0 max 5 heatingcontrol.0 2019-12-31 10:19:44.665 debug (4204) Profile Type Mo-FR + Sa-So, profiles 1 heatingcontrol.0 2019-12-31 10:19:44.665 debug (4204) room Küche with 5 periods heatingcontrol.0 2019-12-31 10:19:44.475 debug (4204) create data profile points (absolute) for Küche heatingcontrol.0 2019-12-31 10:19:44.475 debug (4204) add state Profiles.0.Badezimmer.Sa-So.Periods.4 max 5 heatingcontrol.0 2019-12-31 10:19:44.475 debug (4204) add state Profiles.0.Badezimmer.Sa-So.Periods.3 max 5 heatingcontrol.0 2019-12-31 10:19:44.475 debug (4204) add state Profiles.0.Badezimmer.Sa-So.Periods.2 max 5 heatingcontrol.0 2019-12-31 10:19:44.475 debug (4204) add state Profiles.0.Badezimmer.Sa-So.Periods.1 max 5 heatingcontrol.0 2019-12-31 10:19:44.475 debug (4204) add state Profiles.0.Badezimmer.Sa-So.Periods.0 max 5 heatingcontrol.0 2019-12-31 10:19:44.474 debug (4204) add state Profiles.0.Badezimmer.Mo-Fr.Periods.4 max 5 heatingcontrol.0 2019-12-31 10:19:44.474 debug (4204) add state Profiles.0.Badezimmer.Mo-Fr.Periods.3 max 5 heatingcontrol.0 2019-12-31 10:19:44.474 debug (4204) add state Profiles.0.Badezimmer.Mo-Fr.Periods.2 max 5 heatingcontrol.0 2019-12-31 10:19:44.474 debug (4204) add state Profiles.0.Badezimmer.Mo-Fr.Periods.1 max 5 heatingcontrol.0 2019-12-31 10:19:44.474 debug (4204) add state Profiles.0.Badezimmer.Mo-Fr.Periods.0 max 5 heatingcontrol.0 2019-12-31 10:19:44.474 debug (4204) Profile Type Mo-FR + Sa-So, profiles 1 heatingcontrol.0 2019-12-31 10:19:44.473 debug (4204) room Badezimmer with 5 periods heatingcontrol.0 2019-12-31 10:19:44.332 debug (4204) create data profile points (absolute) for Badezimmer heatingcontrol.0 2019-12-31 10:19:44.331 debug (4204) add state Profiles.0.Arbeitszimmer.Sa-So.Periods.4 max 5 heatingcontrol.0 2019-12-31 10:19:44.331 debug (4204) add state Profiles.0.Arbeitszimmer.Sa-So.Periods.3 max 5 heatingcontrol.0 2019-12-31 10:19:44.331 debug (4204) add state Profiles.0.Arbeitszimmer.Sa-So.Periods.2 max 5 heatingcontrol.0 2019-12-31 10:19:44.331 debug (4204) add state Profiles.0.Arbeitszimmer.Sa-So.Periods.1 max 5 heatingcontrol.0 2019-12-31 10:19:44.331 debug (4204) add state Profiles.0.Arbeitszimmer.Sa-So.Periods.0 max 5 heatingcontrol.0 2019-12-31 10:19:44.331 debug (4204) add state Profiles.0.Arbeitszimmer.Mo-Fr.Periods.4 max 5 heatingcontrol.0 2019-12-31 10:19:44.331 debug (4204) add state Profiles.0.Arbeitszimmer.Mo-Fr.Periods.3 max 5 heatingcontrol.0 2019-12-31 10:19:44.330 debug (4204) add state Profiles.0.Arbeitszimmer.Mo-Fr.Periods.2 max 5 heatingcontrol.0 2019-12-31 10:19:44.330 debug (4204) add state Profiles.0.Arbeitszimmer.Mo-Fr.Periods.1 max 5 heatingcontrol.0 2019-12-31 10:19:44.330 debug (4204) add state Profiles.0.Arbeitszimmer.Mo-Fr.Periods.0 max 5 heatingcontrol.0 2019-12-31 10:19:44.330 debug (4204) Profile Type Mo-FR + Sa-So, profiles 1 heatingcontrol.0 2019-12-31 10:19:44.329 debug (4204) room Arbeitszimmer with 5 periods heatingcontrol.0 2019-12-31 10:19:44.278 debug (4204) create data profile points (absolute) for Arbeitszimmer heatingcontrol.0 2019-12-31 10:19:44.278 debug (4204) rooms 6 heatingcontrol.0 2019-12-31 10:19:44.263 debug (4204) create data points for Wohnzimmer heatingcontrol.0 2019-12-31 10:19:44.252 debug (4204) create data points for Küche heatingcontrol.0 2019-12-31 10:19:44.248 debug (4204) create data points for Badezimmer heatingcontrol.0 2019-12-31 10:19:44.226 debug (4204) create data points for Arbeitszimmer heatingcontrol.0 2019-12-31 10:19:43.903 debug (4204) start CreateDatepoints heatingcontrol.0 2019-12-31 11:19:45.322 debug (4204) thermostat hm-rpc.1.000A17098D4EAA.1.SET_POINT_TEMPERATURE nothing to do, already 23 heatingcontrol.0 2019-12-31 11:19:45.321 info (4204) room Badezimmer Thermostat Heizung Bad.SET_POINT_TEMPERATURE target is 23 heatingcontrol.0 2019-12-31 11:19:45.321 debug (4204) thermostat hm-rpc.1.000A97099C1E2C.1.SET_POINT_TEMPERATURE nothing to do, already 23 heatingcontrol.0 2019-12-31 11:19:45.318 info (4204) room Badezimmer Thermostat Fußbodenheizung Bad.SET_POINT_TEMPERATURE target is 23 heatingcontrol.0 2019-12-31 11:19:45.318 debug (4204) ### new target temp23 heatingcontrol.0 2019-12-31 11:19:45.318 debug (4204) ### current > 1 1 2 heatingcontrol.0 2019-12-31 11:19:45.318 debug (4204) Badezimmer found period 1 with 23 on 08,00 heatingcontrol.0 2019-12-31 11:19:45.316 debug (4204) check ID Profiles.0.Badezimmer.Sa-So.Periods.4.time heatingcontrol.0 2019-12-31 11:19:45.314 debug (4204) check ID Profiles.0.Badezimmer.Sa-So.Periods.3.time heatingcontrol.0 2019-12-31 11:19:45.311 debug (4204) check ID Profiles.0.Badezimmer.Sa-So.Periods.2.time heatingcontrol.0 2019-12-31 11:19:45.311 debug (4204) check time for Badezimmer Profiles.0.Badezimmer.Sa-So.Periods.1.time 23 heatingcontrol.0 2019-12-31 11:19:45.310 debug (4204) check ID Profiles.0.Badezimmer.Sa-So.Periods.1.time heatingcontrol.0 2019-12-31 11:19:45.310 debug (4204) check time for Badezimmer Profiles.0.Badezimmer.Sa-So.Periods.0.time 19 heatingcontrol.0 2019-12-31 11:19:45.307 debug (4204) check ID Profiles.0.Badezimmer.Sa-So.Periods.0.time heatingcontrol.0 2019-12-31 11:19:45.307 debug (4204) FindNextPeriod for 12/31/2019, 10:19:45 AM in Badezimmer heatingcontrol.0 2019-12-31 11:19:45.306 debug (4204) check room Badezimmer heatingcontrol.0 2019-12-31 11:19:45.297 debug (4204) thermostat hm-rpc.1.000A1709ACCE17.1.SET_POINT_TEMPERATURE nothing to do, already 21 heatingcontrol.0 2019-12-31 11:19:45.291 info (4204) room Arbeitszimmer Thermostat Heizung Arbeitszimmer.SET_POINT_TEMPERATURE target is 21 heatingcontrol.0 2019-12-31 11:19:45.291 debug (4204) ### new target temp21 heatingcontrol.0 2019-12-31 11:19:45.291 debug (4204) ### current > 1 1 2 heatingcontrol.0 2019-12-31 11:19:45.289 debug (4204) Arbeitszimmer found period 1 with 21 on 08,00 heatingcontrol.0 2019-12-31 11:19:45.287 debug (4204) check ID Profiles.0.Arbeitszimmer.Sa-So.Periods.4.time heatingcontrol.0 2019-12-31 11:19:45.283 debug (4204) check ID Profiles.0.Arbeitszimmer.Sa-So.Periods.3.time heatingcontrol.0 2019-12-31 11:19:45.281 debug (4204) check ID Profiles.0.Arbeitszimmer.Sa-So.Periods.2.time heatingcontrol.0 2019-12-31 11:19:45.280 debug (4204) check time for Arbeitszimmer Profiles.0.Arbeitszimmer.Sa-So.Periods.1.time 21 heatingcontrol.0 2019-12-31 11:19:45.278 debug (4204) check ID Profiles.0.Arbeitszimmer.Sa-So.Periods.1.time heatingcontrol.0 2019-12-31 11:19:45.276 debug (4204) check time for Arbeitszimmer Profiles.0.Arbeitszimmer.Sa-So.Periods.0.time 17 heatingcontrol.0 2019-12-31 11:19:45.269 debug (4204) check ID Profiles.0.Arbeitszimmer.Sa-So.Periods.0.time heatingcontrol.0 2019-12-31 11:19:45.269 debug (4204) FindNextPeriod for 12/31/2019, 10:19:45 AM in Arbeitszimmer heatingcontrol.0 2019-12-31 11:19:45.262 debug (4204) check room Arbeitszimmer heatingcontrol.0 2019-12-31 11:19:45.262 debug (4204) profile 0 heatingcontrol.0 2019-12-31 11:19:45.260 debug (4204) get profile heatingcontrol.0 2019-12-31 11:19:45.260 debug (4204) profile type 2 heatingcontrol.0 2019-12-31 11:19:45.252 info (4204) calculating new target temperatures heatingcontrol.0 2019-12-31 11:19:45.251 info (4204) external states checked, done heatingcontrol.0 2019-12-31 11:19:45.249 debug (4204) checking Path2HolidayPresentDP heatingcontrol.0 2019-12-31 11:19:45.248 debug (4204) checking Path2PartyNowDP heatingcontrol.0 2019-12-31 11:19:45.245 debug (4204) checking Path2GuestsPresentDP heatingcontrol.0 2019-12-31 11:19:45.244 debug (4204) checking Path2VacationDP heatingcontrol.0 2019-12-31 11:19:45.240 info (4204) setting Present to true heatingcontrol.0 2019-12-31 11:19:45.239 debug (4204) got Present (1) {"val":true,"ack":true,"ts":1577726419908,"q":0,"from":"system.adapter.javascript.0","user":"system.user.admin","lc":1577726419858} heatingcontrol.0 2019-12-31 11:19:45.237 debug (4204) checking Path2PresentDP heatingcontrol.0 2019-12-31 11:19:45.232 info (4204) setting PublicHolidyToday to true heatingcontrol.0 2019-12-31 11:19:45.229 debug (4204) checking Path2FeiertagAdapter heatingcontrol.0 2019-12-31 11:19:45.228 info (4204) checking all external states heatingcontrol.0 2019-12-31 11:19:45.223 debug (4204) got sensor state {"val":false,"ack":true,"ts":1577717574990,"q":0,"from":"system.adapter.deconz.0","user":"system.user.admin","lc":1576933362844} from deconz.0.Sensors.21.open heatingcontrol.0 2019-12-31 11:19:45.220 debug (4204) got sensor state {"val":false,"ack":true,"ts":1577717574989,"q":0,"from":"system.adapter.deconz.0","user":"system.user.admin","lc":1577638441163} from deconz.0.Sensors.20.open heatingcontrol.0 2019-12-31 11:19:45.217 debug (4204) got sensor state {"val":false,"ack":true,"ts":1577717574989,"q":0,"from":"system.adapter.deconz.0","user":"system.user.admin","lc":1576933207327} from deconz.0.Sensors.19.open heatingcontrol.0 2019-12-31 11:19:45.210 debug (4204) got sensor state {"val":false,"ack":true,"ts":1577717574987,"q":0,"from":"system.adapter.deconz.0","user":"system.user.admin","lc":1576933122635} from deconz.0.Sensors.18.open heatingcontrol.0 2019-12-31 11:19:45.209 debug (4204) got sensor state {"val":false,"ack":true,"ts":1577717574976,"q":0,"from":"system.adapter.deconz.0","user":"system.user.admin","lc":1576933025797} from deconz.0.Sensors.17.open heatingcontrol.0 2019-12-31 11:19:45.205 debug (4204) got sensor state {"val":false,"ack":true,"ts":1577717574976,"q":0,"from":"system.adapter.deconz.0","user":"system.user.admin","lc":1576932905933} from deconz.0.Sensors.16.open heatingcontrol.0 2019-12-31 11:19:45.203 debug (4204) got sensor state {"val":false,"ack":true,"ts":1577717574976,"q":0,"from":"system.adapter.deconz.0","user":"system.user.admin","lc":1577007719646} from deconz.0.Sensors.15.open heatingcontrol.0 2019-12-31 11:19:45.201 debug (4204) Check sensors for Wohnzimmer heatingcontrol.0 2019-12-31 11:19:45.196 debug (4204) got sensor state {"val":false,"ack":true,"ts":1577717574990,"q":0,"from":"system.adapter.deconz.0","user":"system.user.admin","lc":1577644284922} from deconz.0.Sensors.24.open heatingcontrol.0 2019-12-31 11:19:45.195 debug (4204) got sensor state {"val":0,"ack":true,"ts":1577786742689,"q":0,"from":"system.adapter.hm-rpc.1","user":"system.user.admin","lc":1577786742689} from hm-rpc.1.0007D5699E9605.1.STATE heatingcontrol.0 2019-12-31 11:19:45.192 debug (4204) Check sensors for Küche heatingcontrol.0 2019-12-31 11:19:45.186 debug (4204) got sensor state {"val":0,"ack":true,"ts":1577785259127,"q":0,"from":"system.adapter.hm-rpc.1","user":"system.user.admin","lc":1577628013202} from hm-rpc.1.0000D56996187D.1.STATE heatingcontrol.0 2019-12-31 11:19:45.184 debug (4204) Check sensors for Badezimmer heatingcontrol.0 2019-12-31 11:19:45.179 debug (4204) got sensor state {"val":false,"ack":true,"ts":1577717574990,"q":0,"from":"system.adapter.deconz.0","user":"system.user.admin","lc":1577705276875} from deconz.0.Sensors.23.open heatingcontrol.0 2019-12-31 11:19:45.176 debug (4204) got sensor state {"val":false,"ack":true,"ts":1577717574976,"q":0,"from":"system.adapter.deconz.0","user":"system.user.admin","lc":1576925832752} from deconz.0.Sensors.11.open heatingcontrol.0 2019-12-31 11:19:45.157 debug (4204) Check sensors for Arbeitszimmer heatingcontrol.0 2019-12-31 11:19:45.156 debug (4204) [INFO] status = true next event: 4 Jan 2020 20:00:00 heatingcontrol.0 2019-12-31 11:19:45.155 debug (4204) [INFO] status = true next event: 4 Jan 2020 15:00:00 heatingcontrol.0 2019-12-31 11:19:45.154 debug (4204) [INFO] status = true next event: 4 Jan 2020 11:00:00 heatingcontrol.0 2019-12-31 11:19:45.153 debug (4204) [INFO] status = true next event: 4 Jan 2020 07:00:00 heatingcontrol.0 2019-12-31 11:19:45.152 debug (4204) [INFO] status = true next event: 4 Jan 2020 04:00:00 heatingcontrol.0 2019-12-31 11:19:45.151 debug (4204) [INFO] status = true next event: 31 Dec 2019 20:00:00 heatingcontrol.0 2019-12-31 11:19:45.151 debug (4204) [INFO] status = true next event: 31 Dec 2019 15:00:00 heatingcontrol.0 2019-12-31 11:19:45.150 debug (4204) [INFO] status = true next event: 31 Dec 2019 11:00:00 heatingcontrol.0 2019-12-31 11:19:45.150 debug (4204) [INFO] status = true next event: 1 Jan 2020 07:00:00 heatingcontrol.0 2019-12-31 11:19:45.147 debug (4204) [INFO] status = true next event: 1 Jan 2020 04:00:00 heatingcontrol.0 2019-12-31 11:19:45.134 debug (4204) create cron job #9 at 21:0 string: 0 0 21 * * 0,6 Europe/Berlin heatingcontrol.0 2019-12-31 11:19:45.132 debug (4204) create cron job #8 at 16:0 string: 0 0 16 * * 0,6 Europe/Berlin heatingcontrol.0 2019-12-31 11:19:45.129 debug (4204) create cron job #7 at 12:0 string: 0 0 12 * * 0,6 Europe/Berlin heatingcontrol.0 2019-12-31 11:19:45.127 debug (4204) create cron job #6 at 8:0 string: 0 0 8 * * 0,6 Europe/Berlin heatingcontrol.0 2019-12-31 11:19:45.120 debug (4204) create cron job #5 at 5:0 string: 0 0 5 * * 0,6 Europe/Berlin heatingcontrol.0 2019-12-31 11:19:45.117 debug (4204) create cron job #4 at 21:0 string: 0 0 21 * * 1-5 Europe/Berlin -
Jetzt siehts aus als wenn alles funktioniert
Alle Thermostate reagieren auf die Einstellungen.
Oder siehst du da noch was was ich ändern sollte? -
@moppel2810 sieht soweit gut aus...
-
Hallo! Das hatte ich Anfangs genommen - allerdings öffnet der Fully oder auch Chrome auf meinem Tablet dann immer eine Tastatur.
Daher habe ich ein System verwendet, dass ich bereits bei meiner Timer-Konfiguration verwendet habe.LG
HolgerP.S.: Guten Rutsch!
-
@guergen
Hallo! Das hatte ich Anfangs genommen - allerdings öffnet der Fully oder auch Chrome auf meinem Tablet dann immer eine Tastatur.
Daher habe ich ein System verwendet, dass ich bereits bei meiner Timer-Konfiguration verwendet habe.
LG
Holger
P.S.: Guten Rutsch! -
@Rene_HM said in Test Adapter HeatingControl v0.3.x:
@martinschm sagte in Test Adapter HeatingControl v0.3.x:
ist evtl untergegangen
nein, das habe ich noch auf dem Schirm. Ich verstehe hier leider nur noch nicht, was hier schief läuft. Da bin ich noch am suchen...
Welche Version vom adapter läuft eigentlich bei dir?Hi Rene,
frohes neues Jahr.
Bei mir läuft 0.3.9 -
@martinschm nimm mal bitte die 0.3.14 aus github. Ich habe dort noch ein log hinzugefügt, dann sollte ich sehen, wo das Problem leigt...
-
Vis Update 1.1.20 - Update der Mehrprofilversion.
Hinzugefügt: "Aktiv" im Statusfenster, zeigt an welche Heizperiode gerade aktiviert ist.
Hinzugefügt: "Minimaltemperatur" bei den Profilparametern, korrespondierend zur neuen Einstellmöglichkeit im Adapteradmin (löschen wenn unbenutzt).
Hinzugefügt: Grüner Balken unter den Zeit/Temp Einstellungen zur Anzeige der gerade aktiven Periode
Hinzugefügt: Anzeige des aktiven Profils in allen relevanten Blöcken "(P1...)
Edit: KosmetikSieht jetzt so aus
-
Hallo zusammen,
gibt es eine "Start"anleitung? Bei mir wird nach Installation des Adapters nichts an Geräten und/oder Räumen gefunden. Bekomme nur die Meldung " (23387) device list is empty, add dummy device [{"id":0,"name":"TestThermostat","isActive":false,"room":"Office","type":1,"OID_Current":"Test_OID"}]"
-
@Pittini sagte in Test Adapter HeatingControl v0.3.x:
Vis Update 1.1.20 - Update der Mehrprofilversion.
Wie ist der Thread zum View damit ich ein Import machen könnte ?
-
@MyMeyer sagte in Test Adapter HeatingControl v0.3.x:
Wie ist der Thread zum View damit ich ein Import machen könnte ?
Einfach auf das blaue "Vis" in der Ankündigung klicken, das isn Link.
-
Um den WAF nicht von Anfang an auf Gefriertemperatur zu setzen, möchte ich für das Badezimmer auf Knopfdruck den Override realisieren. Wird der Taster gedrückt werden TemperaturOverride und TemperaturOverrideTime beschrieben.
Das Blockly:
Die Temperatur und Zeit werden gesetzt und der Status geht auch auf override
Im Log sind nach dem starten des Scripts diese Meldungen:
2020-01-02 16:30:53.568 - info: javascript.0 (22252) script.js.common.Tests.Baden__Duschen: Typ von TemperaturOverride ist string 2020-01-02 16:30:53.569 - warn: javascript.0 (22252) You are assigning a string to the state "heatingcontrol.0.Rooms.aTEST.TemperaturOverride" which expects a float. Please fix your code to use a float or change the state type to string. This warning might become an error in future versions.Wenn ich die Solltemperatur nicht konvertiere, dann ist die erste Warnmeldung:
You are assigning a number to the state .....Wie kann ich das Blockly ändern, damit es nicht zu diesen Warnungen kommt? Der Typ der Solltemperatur wurde auf alle möglichen (und unmöglichen) Einstellungen geändert um ohne Konvertierung zu übergeben, alles leider ohne Erfolg.
-
@Jan-Fiedler eine Start-Anleitung gibt es noch nicht, aber die Frage wurde hier schon öfters gestellt...
- keine Räume: das liegt daran, dass du in der Aufzählung hier keine Räume hast. Einfach Räume hinzufügen und im admin "Suche Räume" anklicken.
- keine Geräte: Derzeit werden nur Homematic - Geräte automatisch gefunden. Alles andere muss manuell konfiguriert werden:
-
@Gsiberger mit Blockly kenne ich mich nicht aus. Mit javascript würde ich folgendes versuchen:
setState('heatingcontrol.0.Rooms.Arbeitszimmer.TemperaturOverride', parseFloat("25.0")); setState('heatingcontrol.0.Rooms.Arbeitszimmer.TemperaturOverrideTime',"00:20");Ich denke aber, die Warnung kannst du ignorieren, solange die Werte übernommen werden...
-
@Rene_HM
OK, danke -
@Rene_HM Danke!
-
Hallo,
der Adapter läuft jetzt seid zwei Wochen und erstmal ein grosses Dankeschön an @Rene_HM für diese tolle Arbeit.Zwei kleine Fragen hätte ich noch:
-Ich habe momentan die Version 0.3.10. Wie installiere ich die neueste Version des Adapters ohne dass ich die alte Instanz deinstallieren muss? Oder kann man nicht einfach "drüberinstallieren"? Ich habs mit dem Button upload versucht, bleibt aber immer auf Version 0.3.10.-Ich hab in einem Raum drei Thermostate von HM und habe mir jetzt einen Wandthermostat von HM dazu gekauft. Wo muss ich im Adapter welche welche Eintragen, damit das Zusammenspiel der Heizkörperthermostate und des Wandthermosatates funktioniert?
Danke euch
