Test Adapter HeatingControl v2.12.x

[Rene_HM]

@HoffmannOs was sagt denn dein duty cycle? Die Meldung deutet darauf hin, dass das Gerät nicht erreichbar ist...

[HoffmannOs]

@Rene_HM das sieht sonst immer gut aus, egal ob die States von den Scripten abgefragt werden, Änderungen der Zustände, Temperaturen etc. Keine Fehler soweit.

Edit :

Ich habe das nun nochmal beobachtet, bin da kein Profi... der Fehler tritt auf sobald ein Fenster geöffnet oder geschlossen wird, der Offset ist auf 4.5 eingestellt und sobald das fenster geschlossen wird, wird auch sofort der DutyCycle ausgelöst, steuere ich die Heizung über ein Script oder in der Homematic habe ich keine erhöte Auslösung.

[Rene_HM]

@HoffmannOs dann schalte debug vom hm-rpc aus, lasse aber debug am heatingcontrol an. Starte heatingcontrol neu und öffne und schliesse das Fenster. Von diesem ganzen Vorgang hätte ich gern das log (ja, ich weiß, das sind viele Zeilen )

[HoffmannOs]

@Rene_HM

heatingcontrol.0	2020-03-04 13:14:04.477	debug	(19068) [INFO] status = true next event: 7 Mar 2020 21:00:00
heatingcontrol.0	2020-03-04 13:14:04.477	debug	(19068) [INFO] status = true next event: 7 Mar 2020 18:00:00
heatingcontrol.0	2020-03-04 13:14:04.476	debug	(19068) [INFO] status = true next event: 7 Mar 2020 16:00:00
heatingcontrol.0	2020-03-04 13:14:04.476	debug	(19068) [INFO] status = true next event: 7 Mar 2020 08:00:00
heatingcontrol.0	2020-03-04 13:14:04.476	debug	(19068) [INFO] status = true next event: 7 Mar 2020 00:00:00
heatingcontrol.0	2020-03-04 13:14:04.475	debug	(19068) [INFO] status = true next event: 4 Mar 2020 21:00:00
heatingcontrol.0	2020-03-04 13:14:04.474	debug	(19068) [INFO] status = true next event: 4 Mar 2020 16:00:00
heatingcontrol.0	2020-03-04 13:14:04.474	debug	(19068) [INFO] status = true next event: 5 Mar 2020 12:00:00
heatingcontrol.0	2020-03-04 13:14:04.474	debug	(19068) [INFO] status = true next event: 5 Mar 2020 08:00:00
heatingcontrol.0	2020-03-04 13:14:04.473	debug	(19068) [INFO] status = true next event: 5 Mar 2020 00:00:00
heatingcontrol.0	2020-03-04 13:14:04.473	debug	(19068) [INFO] status = true next event: 31 Mar 2020 23:55:00
heatingcontrol.0	2020-03-04 13:14:04.472	debug	(19068) [INFO] status = true next event: 1 Oct 2020 00:05:00
heatingcontrol.0	2020-03-04 13:14:04.468	debug	(19068) thermostat hm-rpc.1.MEQ0055220.4.SET_TEMPERATURE to 19; current is 4.5
heatingcontrol.0	2020-03-04 13:14:04.465	info	(19068) room Flur Thermostat hm-rpc.1.MEQ0055220.4.ACTUAL_TEMPERATURE target is 19
heatingcontrol.0	2020-03-04 13:14:04.465	info	(19068) room Flur setting new target 19
heatingcontrol.0	2020-03-04 13:14:04.465	debug	(19068) ### new target temp19
heatingcontrol.0	2020-03-04 13:14:04.465	debug	(19068) ### current > 1 2 2
heatingcontrol.0	2020-03-04 13:14:04.465	debug	(19068) Flur found period 2 with 19 on 12,00
heatingcontrol.0	2020-03-04 13:14:04.464	debug	(19068) check ID Profiles.0.Flur.Mo-Fr.Periods.4.time
heatingcontrol.0	2020-03-04 13:14:04.463	debug	(19068) check ID Profiles.0.Flur.Mo-Fr.Periods.3.time
heatingcontrol.0	2020-03-04 13:14:04.463	debug	(19068) check time for Flur Profiles.0.Flur.Mo-Fr.Periods.2.time 19
heatingcontrol.0	2020-03-04 13:14:04.463	debug	(19068) check ID Profiles.0.Flur.Mo-Fr.Periods.2.time
heatingcontrol.0	2020-03-04 13:14:04.463	debug	(19068) check time for Flur Profiles.0.Flur.Mo-Fr.Periods.1.time 19
heatingcontrol.0	2020-03-04 13:14:04.462	debug	(19068) check ID Profiles.0.Flur.Mo-Fr.Periods.1.time
heatingcontrol.0	2020-03-04 13:14:04.462	debug	(19068) check time for Flur Profiles.0.Flur.Mo-Fr.Periods.0.time 18
heatingcontrol.0	2020-03-04 13:14:04.415	debug	(19068) check ID Profiles.0.Flur.Mo-Fr.Periods.0.time
heatingcontrol.0	2020-03-04 13:14:04.415	debug	(19068) FindNextPeriod for 3/4/2020, 1:14:04 PM in Flur
heatingcontrol.0	2020-03-04 13:14:04.414	debug	(19068) absolute GuestIncrease {"val":0,"ack":true,"ts":1582983059226,"q":0,"from":"system.adapter.heatingcontrol.0","user":"system.user.admin","lc":1582983059226}
heatingcontrol.0	2020-03-04 13:14:04.414	debug	(19068) absolute AbsentDecrease {"val":0,"ack":true,"ts":1582983059321,"q":0,"from":"system.adapter.heatingcontrol.0","user":"system.user.admin","lc":1582983059321}
heatingcontrol.0	2020-03-04 13:14:04.413	debug	(19068) absolute PartyDecrease {"val":0,"ack":true,"ts":1582983059317,"q":0,"from":"system.adapter.heatingcontrol.0","user":"system.user.admin","lc":1582983059317}
heatingcontrol.0	2020-03-04 13:14:04.408	debug	(19068) absolute VacationAbsentDecrease {"val":0,"ack":true,"ts":1582983059324,"q":0,"from":"system.adapter.heatingcontrol.0","user":"system.user.admin","lc":1582983059324}
heatingcontrol.0	2020-03-04 13:14:04.406	debug	(19068) absolute WindowOpenDecrease {"val":4.5,"ack":true,"ts":1583036561847,"q":0,"from":"system.adapter.heatingcontrol.0","user":"system.user.admin","lc":1583036561846}
heatingcontrol.0	2020-03-04 13:14:04.405	debug	(19068) Flur window open is false
heatingcontrol.0	2020-03-04 13:14:04.405	debug	(19068) check room Flur
heatingcontrol.0	2020-03-04 13:14:04.405	debug	(19068) profile 0
heatingcontrol.0	2020-03-04 13:14:04.405	debug	(19068) get profile
heatingcontrol.0	2020-03-04 13:14:04.404	debug	(19068) profile type 2
heatingcontrol.0	2020-03-04 13:14:04.402	debug	(19068) ### not handled hm-rpc.1.OEQ1431500.1.STATE {"val":false,"ack":true,"ts":1583324044398,"q":0,"from":"system.adapter.hm-rpc.1","user":"system.user.admin","lc":1583324044398}
heatingcontrol.0	2020-03-04 13:14:04.402	debug	(19068) ### 222 not handled yet
heatingcontrol.0	2020-03-04 13:14:04.402	info	(19068) calculating new target temperatures
heatingcontrol.0	2020-03-04 13:14:04.402	debug	(19068) room to check is Flur
heatingcontrol.0	2020-03-04 13:14:04.400	debug	(19068) Flur window open is false
heatingcontrol.0	2020-03-04 13:14:04.400	debug	(19068) got sensor state {"val":false,"ack":true,"ts":1583324044398,"q":0,"from":"system.adapter.hm-rpc.1","user":"system.user.admin","lc":1583324044398} from hm-rpc.1.OEQ1431500.1.STATE
heatingcontrol.0	2020-03-04 13:14:04.399	debug	(19068) got sensor state {"val":false,"ack":true,"ts":1583323146392,"q":0,"from":"system.adapter.hm-rpc.1","user":"system.user.admin","lc":1583029065930} from hm-rpc.1.OEQ0429098.1.STATE
heatingcontrol.0	2020-03-04 13:14:04.399	debug	(19068) Check sensors for Flur
heatingcontrol.0	2020-03-04 13:14:04.399	debug	(19068) ### handle devices [{"id":8,"name":"Flur Rechts","OID_Current":"hm-rpc.1.OEQ1431500.1.STATE","isActive":true,"type":3,"room":"Flur"}]
heatingcontrol.0	2020-03-04 13:14:04.399	debug	(19068) handle id hm-rpc.1.OEQ1431500.1.STATE state {"val":false,"ack":true,"ts":1583324044398,"q":0,"from":"system.adapter.hm-rpc.1","user":"system.user.admin","lc":1583324044398}
heatingcontrol.0	2020-03-04 13:14:04.399	debug	(19068) ### 111 not handled yet
heatingcontrol.0	2020-03-04 13:14:04.398	debug	(19068) ### hm-rpc.1.OEQ1431500.1.STATE hm-rpc.1.OEQ1431500.1.STATE false true
heatingcontrol.0	2020-03-04 13:14:04.398	debug	(19068) ### handle state change hm-rpc.1.OEQ1431500.1.STATE {"val":false,"ack":true,"ts":1583324044398,"q":0,"from":"system.adapter.hm-rpc.1","user":"system.user.admin","lc":1583324044398}
heatingcontrol.0	2020-03-04 13:13:55.327	debug	(19068) ### state change already handled: true / true /// hm-rpc.1.OEQ1431500.1.STATE / hm-rpc.1.OEQ1431500.1.STATE
heatingcontrol.0	2020-03-04 13:13:55.327	debug	(19068) ### handle state change hm-rpc.1.OEQ1431500.1.STATE {"val":true,"ack":true,"ts":1583324035326,"q":0,"from":"system.adapter.hm-rpc.1","user":"system.user.admin","lc":1583324033743}
heatingcontrol.0	2020-03-04 13:13:53.874	debug	(19068) [INFO] status = true next event: 7 Mar 2020 21:00:00
heatingcontrol.0	2020-03-04 13:13:53.873	debug	(19068) [INFO] status = true next event: 7 Mar 2020 18:00:00
heatingcontrol.0	2020-03-04 13:13:53.872	debug	(19068) [INFO] status = true next event: 7 Mar 2020 16:00:00
heatingcontrol.0	2020-03-04 13:13:53.872	debug	(19068) [INFO] status = true next event: 7 Mar 2020 08:00:00
heatingcontrol.0	2020-03-04 13:13:53.872	debug	(19068) [INFO] status = true next event: 7 Mar 2020 00:00:00
heatingcontrol.0	2020-03-04 13:13:53.871	debug	(19068) [INFO] status = true next event: 4 Mar 2020 21:00:00
heatingcontrol.0	2020-03-04 13:13:53.871	debug	(19068) [INFO] status = true next event: 4 Mar 2020 16:00:00
heatingcontrol.0	2020-03-04 13:13:53.871	debug	(19068) [INFO] status = true next event: 5 Mar 2020 12:00:00
heatingcontrol.0	2020-03-04 13:13:53.871	debug	(19068) [INFO] status = true next event: 5 Mar 2020 08:00:00
heatingcontrol.0	2020-03-04 13:13:53.870	debug	(19068) [INFO] status = true next event: 5 Mar 2020 00:00:00
heatingcontrol.0	2020-03-04 13:13:53.870	debug	(19068) [INFO] status = true next event: 31 Mar 2020 23:55:00
heatingcontrol.0	2020-03-04 13:13:53.869	debug	(19068) [INFO] status = true next event: 1 Oct 2020 00:05:00
heatingcontrol.0	2020-03-04 13:13:53.864	debug	(19068) thermostat hm-rpc.1.MEQ0055220.4.SET_TEMPERATURE to 4.5; current is 19
heatingcontrol.0	2020-03-04 13:13:53.863	info	(19068) room Flur Thermostat hm-rpc.1.MEQ0055220.4.ACTUAL_TEMPERATURE target is 4.5
heatingcontrol.0	2020-03-04 13:13:53.863	info	(19068) room Flur setting new target 4.5
heatingcontrol.0	2020-03-04 13:13:53.863	info	(19068) setting to reduced/increased temperature in Flur to 4.5
heatingcontrol.0	2020-03-04 13:13:53.863	debug	(19068) ### current > 1 2 2
heatingcontrol.0	2020-03-04 13:13:53.862	debug	(19068) Flur found period 2 with 19 on 12,00
heatingcontrol.0	2020-03-04 13:13:53.862	debug	(19068) check ID Profiles.0.Flur.Mo-Fr.Periods.4.time
heatingcontrol.0	2020-03-04 13:13:53.862	debug	(19068) check ID Profiles.0.Flur.Mo-Fr.Periods.3.time
heatingcontrol.0	2020-03-04 13:13:53.862	debug	(19068) check time for Flur Profiles.0.Flur.Mo-Fr.Periods.2.time 19
heatingcontrol.0	2020-03-04 13:13:53.861	debug	(19068) check ID Profiles.0.Flur.Mo-Fr.Periods.2.time
heatingcontrol.0	2020-03-04 13:13:53.861	debug	(19068) check time for Flur Profiles.0.Flur.Mo-Fr.Periods.1.time 19
heatingcontrol.0	2020-03-04 13:13:53.813	debug	(19068) check ID Profiles.0.Flur.Mo-Fr.Periods.1.time
heatingcontrol.0	2020-03-04 13:13:53.813	debug	(19068) check time for Flur Profiles.0.Flur.Mo-Fr.Periods.0.time 18
heatingcontrol.0	2020-03-04 13:13:53.812	debug	(19068) check ID Profiles.0.Flur.Mo-Fr.Periods.0.time
heatingcontrol.0	2020-03-04 13:13:53.811	debug	(19068) FindNextPeriod for 3/4/2020, 1:13:53 PM in Flur
heatingcontrol.0	2020-03-04 13:13:53.811	debug	(19068) use window open decrease
heatingcontrol.0	2020-03-04 13:13:53.811	debug	(19068) absolute GuestIncrease {"val":0,"ack":true,"ts":1582983059226,"q":0,"from":"system.adapter.heatingcontrol.0","user":"system.user.admin","lc":1582983059226}
heatingcontrol.0	2020-03-04 13:13:53.811	debug	(19068) absolute AbsentDecrease {"val":0,"ack":true,"ts":1582983059321,"q":0,"from":"system.adapter.heatingcontrol.0","user":"system.user.admin","lc":1582983059321}
heatingcontrol.0	2020-03-04 13:13:53.811	debug	(19068) absolute PartyDecrease {"val":0,"ack":true,"ts":1582983059317,"q":0,"from":"system.adapter.heatingcontrol.0","user":"system.user.admin","lc":1582983059317}
heatingcontrol.0	2020-03-04 13:13:53.810	debug	(19068) absolute VacationAbsentDecrease {"val":0,"ack":true,"ts":1582983059324,"q":0,"from":"system.adapter.heatingcontrol.0","user":"system.user.admin","lc":1582983059324}
heatingcontrol.0	2020-03-04 13:13:53.809	debug	(19068) absolute WindowOpenDecrease {"val":4.5,"ack":true,"ts":1583036561847,"q":0,"from":"system.adapter.heatingcontrol.0","user":"system.user.admin","lc":1583036561846}
heatingcontrol.0	2020-03-04 13:13:53.808	debug	(19068) Flur window open is true
heatingcontrol.0	2020-03-04 13:13:53.808	debug	(19068) check room Flur
heatingcontrol.0	2020-03-04 13:13:53.808	debug	(19068) profile 0
heatingcontrol.0	2020-03-04 13:13:53.808	debug	(19068) get profile
heatingcontrol.0	2020-03-04 13:13:53.808	debug	(19068) profile type 2
heatingcontrol.0	2020-03-04 13:13:53.748	debug	(19068) ### not handled hm-rpc.1.OEQ1431500.1.STATE {"val":true,"ack":true,"ts":1583324033743,"q":0,"from":"system.adapter.hm-rpc.1","user":"system.user.admin","lc":1583324033743}
heatingcontrol.0	2020-03-04 13:13:53.748	debug	(19068) ### 222 not handled yet
heatingcontrol.0	2020-03-04 13:13:53.748	info	(19068) calculating new target temperatures
heatingcontrol.0	2020-03-04 13:13:53.748	debug	(19068) room to check is Flur
heatingcontrol.0	2020-03-04 13:13:53.747	debug	(19068) Flur window open is true
heatingcontrol.0	2020-03-04 13:13:53.747	info	(19068) Flur window open on Flur Rechts
heatingcontrol.0	2020-03-04 13:13:53.747	debug	(19068) got sensor state {"val":true,"ack":true,"ts":1583324033743,"q":0,"from":"system.adapter.hm-rpc.1","user":"system.user.admin","lc":1583324033743} from hm-rpc.1.OEQ1431500.1.STATE
heatingcontrol.0	2020-03-04 13:13:53.746	debug	(19068) got sensor state {"val":false,"ack":true,"ts":1583323146392,"q":0,"from":"system.adapter.hm-rpc.1","user":"system.user.admin","lc":1583029065930} from hm-rpc.1.OEQ0429098.1.STATE
heatingcontrol.0	2020-03-04 13:13:53.746	debug	(19068) Check sensors for Flur
heatingcontrol.0	2020-03-04 13:13:53.745	debug	(19068) ### handle devices [{"id":8,"name":"Flur Rechts","OID_Current":"hm-rpc.1.OEQ1431500.1.STATE","isActive":true,"type":3,"room":"Flur"}]
heatingcontrol.0	2020-03-04 13:13:53.745	debug	(19068) handle id hm-rpc.1.OEQ1431500.1.STATE state {"val":true,"ack":true,"ts":1583324033743,"q":0,"from":"system.adapter.hm-rpc.1","user":"system.user.admin","lc":1583324033743}
heatingcontrol.0	2020-03-04 13:13:53.745	debug	(19068) ### 111 not handled yet
heatingcontrol.0	2020-03-04 13:13:53.745	debug	(19068) ### hm-rpc.1.OEQ1431500.1.STATE true 1
heatingcontrol.0	2020-03-04 13:13:53.745	debug	(19068) ### handle state change hm-rpc.1.OEQ1431500.1.STATE {"val":true,"ack":true,"ts":1583324033743,"q":0,"from":"system.adapter.hm-rpc.1","user":"system.user.admin","lc":1583324033743}
heatingcontrol.0	2020-03-04 13:13:47.494	debug	(19068) #subscribtion finished
heatingcontrol.0	2020-03-04 13:13:47.494	info	(19068) subscribe Flur hm-rpc.1.OEQ1431500.1.STATE
heatingcontrol.0	2020-03-04 13:13:47.493	info	(19068) subscribe Flur hm-rpc.1.OEQ0429098.1.STATE
heatingcontrol.0	2020-03-04 13:13:47.493	debug	(19068) room not active or not available {"name":"Wohnzimmer","isActive":false,"WindowIsOpen":false}
heatingcontrol.0	2020-03-04 13:13:47.493	debug	(19068) room not active or not available {"name":"Schlafzimmer","isActive":false,"WindowIsOpen":false}
heatingcontrol.0	2020-03-04 13:13:47.493	debug	(19068) room not active or not available {"name":"Küche","isActive":false,"WindowIsOpen":false}
heatingcontrol.0	2020-03-04 13:13:47.493	debug	(19068) room not active or not available {"name":"Kinderzimmer","isActive":false,"WindowIsOpen":false}
heatingcontrol.0	2020-03-04 13:13:47.493	debug	(19068) room not active or not available {"name":"Badezimmer","isActive":false,"WindowIsOpen":false}
heatingcontrol.0	2020-03-04 13:13:47.492	debug	(19068) no subscribe Path2PartyNowDP
heatingcontrol.0	2020-03-04 13:13:47.492	debug	(19068) no subscribe Path2GuestsPresentDP
heatingcontrol.0	2020-03-04 13:13:47.492	debug	(19068) no subscribe Path2HolidayPresentDP
heatingcontrol.0	2020-03-04 13:13:47.492	debug	(19068) no subscribe Path2VacationDP
heatingcontrol.0	2020-03-04 13:13:47.492	debug	(19068) no subscribe Path2PresentDP
heatingcontrol.0	2020-03-04 13:13:47.492	debug	(19068) no subscribe Path2FeiertagAdapter
heatingcontrol.0	2020-03-04 13:13:47.492	debug	(19068) #start subscribtion
heatingcontrol.0	2020-03-04 13:13:47.491	debug	(19068) [INFO] status = true next event: 7 Mar 2020 21:00:00
heatingcontrol.0	2020-03-04 13:13:47.491	debug	(19068) [INFO] status = true next event: 7 Mar 2020 18:00:00
heatingcontrol.0	2020-03-04 13:13:47.490	debug	(19068) [INFO] status = true next event: 7 Mar 2020 16:00:00
heatingcontrol.0	2020-03-04 13:13:47.490	debug	(19068) [INFO] status = true next event: 7 Mar 2020 08:00:00
heatingcontrol.0	2020-03-04 13:13:47.490	debug	(19068) [INFO] status = true next event: 7 Mar 2020 00:00:00
heatingcontrol.0	2020-03-04 13:13:47.489	debug	(19068) [INFO] status = true next event: 4 Mar 2020 21:00:00
heatingcontrol.0	2020-03-04 13:13:47.489	debug	(19068) [INFO] status = true next event: 4 Mar 2020 16:00:00
heatingcontrol.0	2020-03-04 13:13:47.489	debug	(19068) [INFO] status = true next event: 5 Mar 2020 12:00:00
heatingcontrol.0	2020-03-04 13:13:47.488	debug	(19068) [INFO] status = true next event: 5 Mar 2020 08:00:00
heatingcontrol.0	2020-03-04 13:13:47.488	debug	(19068) [INFO] status = true next event: 5 Mar 2020 00:00:00
heatingcontrol.0	2020-03-04 13:13:47.487	debug	(19068) [INFO] status = true next event: 31 Mar 2020 23:55:00
heatingcontrol.0	2020-03-04 13:13:47.485	debug	(19068) [INFO] status = true next event: 1 Oct 2020 00:05:00
heatingcontrol.0	2020-03-04 13:13:47.481	debug	(19068) thermostat hm-rpc.1.MEQ0055220.4.SET_TEMPERATURE nothing to do, already 19
heatingcontrol.0	2020-03-04 13:13:47.480	info	(19068) room Flur Thermostat hm-rpc.1.MEQ0055220.4.ACTUAL_TEMPERATURE target is 19
heatingcontrol.0	2020-03-04 13:13:47.480	info	(19068) room Flur setting new target 19
heatingcontrol.0	2020-03-04 13:13:47.480	debug	(19068) ### new target temp19
heatingcontrol.0	2020-03-04 13:13:47.479	debug	(19068) ### current > 1 2 2
heatingcontrol.0	2020-03-04 13:13:47.479	debug	(19068) Flur found period 2 with 19 on 12,00
heatingcontrol.0	2020-03-04 13:13:47.479	debug	(19068) check ID Profiles.0.Flur.Mo-Fr.Periods.4.time
heatingcontrol.0	2020-03-04 13:13:47.479	debug	(19068) check ID Profiles.0.Flur.Mo-Fr.Periods.3.time
heatingcontrol.0	2020-03-04 13:13:47.479	debug	(19068) check time for Flur Profiles.0.Flur.Mo-Fr.Periods.2.time 19
heatingcontrol.0	2020-03-04 13:13:47.478	debug	(19068) check ID Profiles.0.Flur.Mo-Fr.Periods.2.time
heatingcontrol.0	2020-03-04 13:13:47.478	debug	(19068) check time for Flur Profiles.0.Flur.Mo-Fr.Periods.1.time 19
heatingcontrol.0	2020-03-04 13:13:47.477	debug	(19068) check ID Profiles.0.Flur.Mo-Fr.Periods.1.time
heatingcontrol.0	2020-03-04 13:13:47.477	debug	(19068) check time for Flur Profiles.0.Flur.Mo-Fr.Periods.0.time 18
heatingcontrol.0	2020-03-04 13:13:47.476	debug	(19068) check ID Profiles.0.Flur.Mo-Fr.Periods.0.time
heatingcontrol.0	2020-03-04 13:13:47.476	debug	(19068) FindNextPeriod for 3/4/2020, 1:13:47 PM in Flur
heatingcontrol.0	2020-03-04 13:13:47.473	debug	(19068) absolute GuestIncrease {"val":0,"ack":true,"ts":1582983059226,"q":0,"from":"system.adapter.heatingcontrol.0","user":"system.user.admin","lc":1582983059226}
heatingcontrol.0	2020-03-04 13:13:47.473	debug	(19068) absolute AbsentDecrease {"val":0,"ack":true,"ts":1582983059321,"q":0,"from":"system.adapter.heatingcontrol.0","user":"system.user.admin","lc":1582983059321}
heatingcontrol.0	2020-03-04 13:13:47.473	debug	(19068) absolute PartyDecrease {"val":0,"ack":true,"ts":1582983059317,"q":0,"from":"system.adapter.heatingcontrol.0","user":"system.user.admin","lc":1582983059317}
heatingcontrol.0	2020-03-04 13:13:47.472	debug	(19068) absolute VacationAbsentDecrease {"val":0,"ack":true,"ts":1582983059324,"q":0,"from":"system.adapter.heatingcontrol.0","user":"system.user.admin","lc":1582983059324}
heatingcontrol.0	2020-03-04 13:13:47.472	debug	(19068) absolute WindowOpenDecrease {"val":4.5,"ack":true,"ts":1583036561847,"q":0,"from":"system.adapter.heatingcontrol.0","user":"system.user.admin","lc":1583036561846}
heatingcontrol.0	2020-03-04 13:13:47.471	debug	(19068) Flur window open is false
heatingcontrol.0	2020-03-04 13:13:47.471	debug	(19068) check room Flur
heatingcontrol.0	2020-03-04 13:13:47.471	debug	(19068) profile 0
heatingcontrol.0	2020-03-04 13:13:47.471	debug	(19068) get profile
heatingcontrol.0	2020-03-04 13:13:47.471	debug	(19068) profile type 2
heatingcontrol.0	2020-03-04 13:13:47.469	info	(19068) calculating new target temperatures
heatingcontrol.0	2020-03-04 13:13:47.468	info	(19068) external states checked, done
heatingcontrol.0	2020-03-04 13:13:47.468	debug	(19068) checking Path2HolidayPresentDP
heatingcontrol.0	2020-03-04 13:13:47.467	debug	(19068) checking Path2PartyNowDP
heatingcontrol.0	2020-03-04 13:13:47.467	debug	(19068) checking Path2GuestsPresentDP
heatingcontrol.0	2020-03-04 13:13:47.466	debug	(19068) checking Path2VacationDP
heatingcontrol.0	2020-03-04 13:13:47.466	debug	(19068) checking Path2PresentDP
heatingcontrol.0	2020-03-04 13:13:47.465	debug	(19068) checking Path2FeiertagAdapter
heatingcontrol.0	2020-03-04 13:13:47.465	info	(19068) checking all external states
heatingcontrol.0	2020-03-04 13:13:47.421	debug	(19068) Flur window open is false
heatingcontrol.0	2020-03-04 13:13:47.421	debug	(19068) got sensor state {"val":false,"ack":true,"ts":1583323935127,"q":0,"from":"system.adapter.hm-rpc.1","user":"system.user.admin","lc":1583323933426} from hm-rpc.1.OEQ1431500.1.STATE
heatingcontrol.0	2020-03-04 13:13:47.418	debug	(19068) got sensor state {"val":false,"ack":true,"ts":1583323146392,"q":0,"from":"system.adapter.hm-rpc.1","user":"system.user.admin","lc":1583029065930} from hm-rpc.1.OEQ0429098.1.STATE
heatingcontrol.0	2020-03-04 13:13:47.416	debug	(19068) Check sensors for Flur
heatingcontrol.0	2020-03-04 13:13:47.415	debug	(19068) [INFO] status = true next event: 7 Mar 2020 21:00:00
heatingcontrol.0	2020-03-04 13:13:47.415	debug	(19068) [INFO] status = true next event: 7 Mar 2020 18:00:00
heatingcontrol.0	2020-03-04 13:13:47.414	debug	(19068) [INFO] status = true next event: 7 Mar 2020 16:00:00
heatingcontrol.0	2020-03-04 13:13:47.413	debug	(19068) [INFO] status = true next event: 7 Mar 2020 08:00:00
heatingcontrol.0	2020-03-04 13:13:47.413	debug	(19068) [INFO] status = true next event: 7 Mar 2020 00:00:00
heatingcontrol.0	2020-03-04 13:13:47.413	debug	(19068) [INFO] status = true next event: 4 Mar 2020 21:00:00
heatingcontrol.0	2020-03-04 13:13:47.412	debug	(19068) [INFO] status = true next event: 4 Mar 2020 16:00:00
heatingcontrol.0	2020-03-04 13:13:47.412	debug	(19068) [INFO] status = true next event: 5 Mar 2020 12:00:00
heatingcontrol.0	2020-03-04 13:13:47.411	debug	(19068) [INFO] status = true next event: 5 Mar 2020 08:00:00
heatingcontrol.0	2020-03-04 13:13:47.411	debug	(19068) [INFO] status = true next event: 5 Mar 2020 00:00:00
heatingcontrol.0	2020-03-04 13:13:47.411	debug	(19068) [INFO] status = true next event: 31 Mar 2020 23:55:00
heatingcontrol.0	2020-03-04 13:13:47.409	debug	(19068) [INFO] status = true next event: 1 Oct 2020 00:05:00
heatingcontrol.0	2020-03-04 13:13:47.406	debug	(19068) create cron job #11 at 21:0 string: 0 0 21 * * 0,6 Europe/Berlin
heatingcontrol.0	2020-03-04 13:13:47.405	debug	(19068) create cron job #10 at 18:0 string: 0 0 18 * * 0,6 Europe/Berlin
heatingcontrol.0	2020-03-04 13:13:47.404	debug	(19068) create cron job #9 at 16:0 string: 0 0 16 * * 0,6 Europe/Berlin
heatingcontrol.0	2020-03-04 13:13:47.404	debug	(19068) create cron job #8 at 8:0 string: 0 0 8 * * 0,6 Europe/Berlin
heatingcontrol.0	2020-03-04 13:13:47.403	debug	(19068) create cron job #7 at 0:0 string: 0 0 0 * * 0,6 Europe/Berlin
heatingcontrol.0	2020-03-04 13:13:47.402	debug	(19068) create cron job #6 at 21:0 string: 0 0 21 * * 1-5 Europe/Berlin
heatingcontrol.0	2020-03-04 13:13:47.401	debug	(19068) create cron job #5 at 16:0 string: 0 0 16 * * 1-5 Europe/Berlin
heatingcontrol.0	2020-03-04 13:13:47.397	debug	(19068) create cron job #4 at 12:0 string: 0 0 12 * * 1-5 Europe/Berlin
heatingcontrol.0	2020-03-04 13:13:47.396	debug	(19068) create cron job #3 at 8:0 string: 0 0 8 * * 1-5 Europe/Berlin
heatingcontrol.0	2020-03-04 13:13:47.395	debug	(19068) create cron job #2 at 0:0 string: 0 0 0 * * 1-5 Europe/Berlin
heatingcontrol.0	2020-03-04 13:13:47.391	debug	(19068) HeatingPeriod: create cron job #1 at 31.03 string: 55 23 31 2 * Europe/Berlin
heatingcontrol.0	2020-03-04 13:13:47.385	debug	(19068) HeatingPeriod: create cron job #0 at 01.10 string: 5 0 01 9 * Europe/Berlin
heatingcontrol.0	2020-03-04 13:13:47.385	info	(19068) check for heating period based on settings between 01.10. and 31.03.
heatingcontrol.0	2020-03-04 13:13:47.385	debug	(19068) push to list = 21,00
heatingcontrol.0	2020-03-04 13:13:47.385	debug	(19068) ---2 found time for Flur at {"val":"21:00","ack":true,"ts":1583022670696,"q":0,"from":"system.adapter.heatingcontrol.0","user":"system.user.admin","lc":1583022670696} 21:00
heatingcontrol.0	2020-03-04 13:13:47.384	debug	(19068) push to list = 18,00
heatingcontrol.0	2020-03-04 13:13:47.384	debug	(19068) ---2 found time for Flur at {"val":"18:00","ack":true,"ts":1583036640094,"q":0,"from":"system.adapter.heatingcontrol.0","user":"system.user.admin","lc":1583036640092} 18:00
heatingcontrol.0	2020-03-04 13:13:47.384	debug	(19068) push to list = 16,00
heatingcontrol.0	2020-03-04 13:13:47.384	debug	(19068) ---2 found time for Flur at {"val":"16:00","ack":true,"ts":1583036631338,"q":0,"from":"system.adapter.heatingcontrol.0","user":"system.user.admin","lc":1583036631335} 16:00
heatingcontrol.0	2020-03-04 13:13:47.383	debug	(19068) push to list = 08,00
heatingcontrol.0	2020-03-04 13:13:47.383	debug	(19068) ---2 found time for Flur at {"val":"08:00","ack":true,"ts":1582983059337,"q":0,"from":"system.adapter.heatingcontrol.0","user":"system.user.admin","lc":1582983059337} 08:00
heatingcontrol.0	2020-03-04 13:13:47.383	debug	(19068) push to list = 00,00
heatingcontrol.0	2020-03-04 13:13:47.383	debug	(19068) ---2 found time for Flur at {"val":"00:00","ack":true,"ts":1582983392726,"q":0,"from":"system.adapter.heatingcontrol.0","user":"system.user.admin","lc":1582983392724} 00:00
heatingcontrol.0	2020-03-04 13:13:47.382	debug	(19068) setting Sa - Su
heatingcontrol.0	2020-03-04 13:13:47.382	debug	(19068) push to list = 21,00
heatingcontrol.0	2020-03-04 13:13:47.382	debug	(19068) ---1 found time for Flur at {"val":"21:00","ack":true,"ts":1583022670695,"q":0,"from":"system.adapter.heatingcontrol.0","user":"system.user.admin","lc":1583022670695} 21:00
heatingcontrol.0	2020-03-04 13:13:47.380	debug	(19068) push to list = 16,00
heatingcontrol.0	2020-03-04 13:13:47.380	debug	(19068) ---1 found time for Flur at {"val":"16:00","ack":true,"ts":1583022670695,"q":0,"from":"system.adapter.heatingcontrol.0","user":"system.user.admin","lc":1583022670695} 16:00
heatingcontrol.0	2020-03-04 13:13:47.380	debug	(19068) push to list = 12,00
heatingcontrol.0	2020-03-04 13:13:47.380	debug	(19068) ---1 found time for Flur at {"val":"12:00","ack":true,"ts":1583022670695,"q":0,"from":"system.adapter.heatingcontrol.0","user":"system.user.admin","lc":1583022670695} 12:00
heatingcontrol.0	2020-03-04 13:13:47.379	debug	(19068) push to list = 08,00
heatingcontrol.0	2020-03-04 13:13:47.379	debug	(19068) ---1 found time for Flur at {"val":"08:00","ack":true,"ts":1582983059337,"q":0,"from":"system.adapter.heatingcontrol.0","user":"system.user.admin","lc":1582983059337} 08:00
heatingcontrol.0	2020-03-04 13:13:47.378	debug	(19068) push to list = 00,00
heatingcontrol.0	2020-03-04 13:13:47.377	debug	(19068) ---1 found time for Flur at {"val":"00:00","ack":true,"ts":1582983369647,"q":0,"from":"system.adapter.heatingcontrol.0","user":"system.user.admin","lc":1582983369645} 00:00
heatingcontrol.0	2020-03-04 13:13:47.377	debug	(19068) setting Mo - Fr
heatingcontrol.0	2020-03-04 13:13:47.377	debug	(19068) profile 0
heatingcontrol.0	2020-03-04 13:13:47.376	debug	(19068) get profile

Der Modus muss auf Manuell oder kann auf Auto gesetzt bleiben?

[moppel2810]

Mahlzeit, ich nutze HMIP Regler und auf diesen sind ja auch eigene Heizperioden gespeichert. Wie bekomm ich diese gelöscht das alles nur noch von Heating Control gesteuert wird?

[Rene_HM]

@moppel2810 ich vermute, da gibt es einen manuell-Modus, wie bei den alten Wand-Thermostaten auch...

[Rene_HM]

@HoffmannOs sagte in Test Adapter HeatingControl v0.3.x:

Der Modus muss auf Manuell oder kann auf Auto gesetzt bleiben?

auf manuell, wurde hier schon öfters berichtet und beschrieben.
Das log selbst sieht gut aus. Alles funktioniert, wie erwartet. Danach sieht man im log auch nichts weiter mehr (speziell, dass im log endlos etwas durchläuft)?
Was passiert, wenn du auf den MEQ0055220:4.SET_TEMPERATURE - Datenpunkt im iobroker Object-Baum einen Wert schreibst? Bekommst du dann den Fehler auch?

[moppel2810]

@Rene_HM da kann ich nichts finden.

[moppel2810]

Hatte heute wieder das Problem das am Thermostat die temp eingestellt war die in ihm drin ist und nicht zu löschen geht. Ich möchte aber logischerweise nur mit heating control steuern und nicht ständig das da das interne Profil aktiv wird

[Voltage]

Mahlzeit.
Ich habe leider nochmals eine Frage zum Override und zwar wie genau stelle ich den ein? Am Thermostat selber zu drehen, ändert den "State" nicht von normal auf override - sobald ich in der Zeile drunter bei "TemperaturOverride" eine Temperaur angebe ändert sich der "State" auf override.
Müsste sich doch normal auch ändern wenn ich eine Änderung am Thermostaten durchführe, oder über eine Homematic-App?

Grüße

[Rene_HM]

@moppel2810 hast du die Thermostate jetzt auf manuell? und immer noch das Problem?

[Rene_HM]

@Voltage sagte in Test Adapter HeatingControl v0.3.x:

Müsste sich doch normal auch ändern wenn ich eine Änderung am Thermostaten durchführe, oder über eine Homematic-App?

müsste nicht, da es nicht implementiert ist. Override funktioniert nur, indem man eine Zit und einen Temperaturwert auf die entsprechenden Datenpunkte schreibt. Eine Änderung am Thermostat selbst wird aktuell wieder überschrieben.
Dazu gibt es übrigens bereits ein Ticket:

https://github.com/rg-engineering/ioBroker.heatingcontrol/issues/70

AlexanderSch90 created this issue in rg-engineering/ioBroker.heatingcontrol

closed Steuerung des Adapters über die Thermostate #70

[moppel2810]

@Rene_HM wie kann ich sie denn auf manuell stellen? Ich geh mal davon aus das ich das über die Raspi webui machen muß, oder?

[Rene_HM]

@moppel2810 bei einem HMIP-eTRV-2 siehe Bedienungsanleitung https://files2.elv.com/public/14/1402/140280/Internet/140280_um.pdf

[moppel2810]

@Rene_HM und in manuell übernimmt dann der Adapter ohne das die Thermostate was ändern?

[Rene_HM]

@moppel2810 so sollte es sein, ja...

[Voltage]

@Rene_HM

Danke dir.
Weiß ich bescheid, dann muss ich zwingend die Anwesenheit einbeziehen. Ich habe saß mit radar2.0 gemacht über unsere jeweilige IP vom Handy. Jetzt bekommen wir die Anwesenheit für zwei Personen an zwei Punkten angezeigt - kann ich zwei Abfragen nutzen sprich zwischen den abfragen evtl ein ; / o.ä setzen? Bisher waren meine Versuche ohne Erfolg.
Oder wäre ein anderer Anwesenheit Adapter besser geeignet?

[guergen]

@Voltage Kleines Script und einen "Jemand Anwesend"-DP erzeugen! Da kannst Du dann so viele Leute mit einbeziehen wie du möchtest!

[Rene_HM]

heatingcontrol 0.3.17 wurde eben in's stable-repository aufgenommen.

Danke allen, die hier mitgetestet haben!!

und ich mache mit 0.4.x weiter, die dann wieder neue Features enthalten wird...

[Chaot]

@Rene_HM 0.3.17? Ich habe aktuell 0.3.18 installiert.