UNSOLVED IOBroker startet nach update auf jscontroller *.*.11 nicht
-
ich habe nur oben stehende befehle ausgeführt.
den fixer hab ich schon laufen lassen.
jetzt kommt allerdings keine fehlermeldung mehr aber iobroker startet trotzdem nicht.
-
-
erich@SmartHome:/opt/iobroker$ iobroker list instances system.adapter.admin.0 : admin - enabled, port: 8081, bind: 0.0.0.0, run as: admin system.adapter.alexa2.0 : alexa2 - enabled system.adapter.amazon-dash.0 : amazon-dash - enabled system.adapter.backitup.0 : backitup - enabled system.adapter.cloud.0 : cloud - enabled system.adapter.deconz.0 : deconz - enabled, port: 80 system.adapter.enigma2.0 : enigma2 - enabled system.adapter.feiertage.0 : feiertage - enabled system.adapter.gardena.0 : gardena - enabled system.adapter.geofency.0 : geofency - enabled, port: 7999 system.adapter.ham.0 : ham - enabled system.adapter.harmony.0 : harmony - enabled system.adapter.history.0 : history - enabled system.adapter.hm-rega.0 : hm-rega - enabled system.adapter.hm-rpc.0 : hm-rpc - enabled, port: 0 system.adapter.hm-rpc.1 : hm-rpc - enabled, port: 1 system.adapter.hs100.0 : hs100 - enabled system.adapter.hue.0 : hue - enabled, port: 80 system.adapter.icons-addictive-flavour-png.0: icons-addictive-flavour-png - enabled system.adapter.icons-fatcow-hosting.0 : icons-fatcow-hosting - enabled system.adapter.icons-icons8.0 : icons-icons8 - enabled system.adapter.icons-material-png.0 : icons-material-png - enabled system.adapter.icons-mfd-png.0 : icons-mfd-png - enabled system.adapter.icons-open-icon-library-png.0: icons-open-icon-library-png - enabled system.adapter.icons-ultimate-png.0 : icons-ultimate-png - enabled system.adapter.info.0 : info - enabled system.adapter.iot.0 : iot - enabled system.adapter.iqontrol.0 : iqontrol - enabled system.adapter.javascript.0 : javascript - enabled system.adapter.material.0 : material - enabled system.adapter.maxcube.0 : maxcube - enabled, port: 62910, bind: 0.0.0.0 system.adapter.mihome-vacuum.0 : mihome-vacuum - enabled, port: 54321 system.adapter.mihome.0 : mihome - enabled, port: 9898, bind: 0.0.0.0 system.adapter.mobile.0 : mobile - enabled system.adapter.moma.0 : moma - enabled system.adapter.netatmo.0 : netatmo - enabled system.adapter.node-red.0 : node-red - enabled, port: 1880, bind: 0.0.0.0 system.adapter.nuc.0 : nuc - enabled system.adapter.nuki.0 : nuki - enabled system.adapter.octoprint.0 : octoprint - enabled system.adapter.pushover.0 : pushover - enabled system.adapter.radar2.0 : radar2 - enabled system.adapter.rflink.0 : rflink - enabled system.adapter.rickshaw.0 : rickshaw - enabled system.adapter.sayit.0 : sayit - enabled, port: 0 system.adapter.sayit.1 : sayit - enabled, port: 0 system.adapter.sayit.2 : sayit - enabled, port: 0 system.adapter.scenes.0 : scenes - enabled system.adapter.scriptgui.0 : scriptgui - enabled, port: 8090, bind: 0.0.0.0, run as: admin system.adapter.socketio.0 : socketio - enabled, port: 8088, bind: 0.0.0.0, run as: admin system.adapter.sonoff.0 : sonoff - enabled, port: 1500, bind: 0.0.0.0 system.adapter.sonoff.1 : sonoff - enabled, port: 1501, bind: 0.0.0.0 system.adapter.sonos.0 : sonos - enabled system.adapter.sourceanalytix.0 : sourceanalytix - enabled system.adapter.ubuntu.0 : ubuntu - enabled system.adapter.virtualpowermeter.0 : virtualpowermeter - enabled system.adapter.vis-hqwidgets.0 : vis-hqwidgets - enabled system.adapter.vis-justgage.0 : vis-justgage - enabled system.adapter.vis-material.0 : vis-material - enabled system.adapter.vis-metro.0 : vis-metro - enabled system.adapter.vis-timeandweather.0 : vis-timeandweather - enabled system.adapter.vis.0 : vis - enabled system.adapter.weatherunderground.0 : weatherunderground - enabled system.adapter.web.0 : web - enabled, port: 8086, bind: 0.0.0.0, run as: admin system.adapter.yahka.0 : yahka - enabled + instance is aliveerich@SmartHome:/opt/iobroker$ sudo iobroker status iobroker is not running Objects type: file States type: file -
-
hab ich vergessen, sorry
erich@SmartHome:/opt/iobroker$ iobroker start erich@SmartHome:/opt/iobroker$ iobroker status iobroker is not running Objects type: file States type: file erich@SmartHome:/opt/iobroker$ -
@muckel sagte in IOBroker startet nach update auf jscontroller *.*.11 nicht:
hab ich vergessen, sorry
Ist am Handy sonst nicht zu entziffern.
Mach Mal bitte einen reboot
-
hab ich schon mehrmals gemacht.
nutzt nichts. -
iobroker update -
erich@SmartHome:/opt/iobroker$ sudo iobroker update Used repository: latest hash not changed, use actual sources update done Adapter "admin" : 3.6.2 , installed 3.6.2 Adapter "admin-2" : 2.0.10 Adapter "alexa2" : 1.1.3 , installed 1.1.3 Adapter "alpha2" : 0.0.4 Adapter "amazon-dash" : 0.3.1 , installed 0.3.1 Adapter "artnet" : 1.0.0 Adapter "asterisk" : 1.0.6 Adapter "asuswrt" : 1.0.1 Adapter "b-control-em" : 0.2.1 Adapter "backitup" : 1.1.4 , installed 1.1.4 Adapter "beckhoff" : 1.0.2 Adapter "benq" : 0.2.0 Adapter "ble" : 0.7.3 Adapter "bmw" : 1.4.0 Adapter "boblight" : 0.0.1 Adapter "bosesoundtouch": 0.2.4 Adapter "botvac" : 1.0.0 Adapter "bring" : 1.3.4 Adapter "broadlink2" : 2.0.0 Adapter "chromecast" : 2.2.3 , installed 2.2.3 Adapter "cloud" : 2.6.2 , installed 2.6.2 Adapter "comfoair" : 0.3.0 Adapter "contactid" : 1.0.0 Adapter "corrently" : 0.0.2 Adapter "cul" : 1.0.0 , installed 1.0.0 Adapter "daikin" : 1.0.3 Adapter "daswetter" : 2.8.0 , installed 2.8.0 Adapter "deconz" : 1.1.2 , installed 1.1.2 Adapter "denon" : 1.5.1 Adapter "discovergy" : 0.4.0 Adapter "discovery" : 2.0.0 , installed 2.0.0 Adapter "doorbird" : 0.1.5 Adapter "dwd" : 2.4.3 , installed 2.4.3 Adapter "ebus" : 0.8.0 Adapter "egigeozone" : 0.1.2 Adapter "ekey" : 1.0.0 Adapter "email" : 1.0.4 Adapter "emby" : 0.1.2 Adapter "energymanager" : 1.2.1 Adapter "enet" : 1.0.1 Adapter "epson_stylus_px830": 0.2.1 Adapter "fakeroku" : 0.2.1 , installed 0.2.1 Adapter "feiertage" : 1.0.11 , installed 1.0.11 Adapter "fhem" : 1.2.0 , installed 1.2.0 Adapter "find-my-iphone": 0.2.17 Adapter "firetv" : 0.0.33 , installed 0.0.33 Adapter "flot" : 1.9.2 , installed 1.9.2 Adapter "foobar2000" : 1.0.0 Adapter "fritzbox" : 0.2.1 Adapter "fritzdect" : 0.2.1 Adapter "fronius" : 1.0.5 Adapter "fullcalendar" : 0.2.4 Adapter "fullybrowser" : 1.0.0 Adapter "g-homa" : 0.4.0 Adapter "geofency" : 0.3.2 , installed 0.3.2 Adapter "gruenbeck" : 0.0.12 Adapter "habpanel" : 0.3.4 Adapter "haier" : 1.0.2 Adapter "ham" : 1.0.0 , installed 1.0.0 Adapter "ham-wemo" : 1.0.0 Adapter "harmony" : 1.2.2 , installed 1.2.2 Adapter "hass-mqtt" : 0.0.5 Adapter "heytech" : 0.1.4 Adapter "hid" : 0.1.17 Adapter "hilink" : 0.2.7 Adapter "history" : 1.8.6 , installed 1.8.6 Adapter "hm-rega" : 2.3.3 , installed 2.3.3 Adapter "hm-rpc" : 1.9.12 , installed 1.9.12 Adapter "hmip" : 0.0.10 Adapter "hombot" : 0.1.3 Adapter "homee" : 0.3.1 Adapter "homepilot" : 1.0.3 Adapter "hp-ilo" : 1.0.1 Adapter "hs100" : 1.0.10 , installed 1.0.10 Adapter "hue" : 1.1.0 , installed 1.2.3 Adapter "hyperion" : 0.0.9 Adapter "i2c" : 0.0.6 Adapter "ical" : 1.7.0 Adapter "icons-addictive-flavour-png": 0.1.0 , installed 0.1.0 Adapter "icons-fatcow-hosting": 0.1.0 , installed 0.1.0 Adapter "icons-icons8" : 0.0.1 , installed 0.0.1 Adapter "icons-material-png": 0.1.0 , installed 0.1.0 Adapter "icons-material-svg": 0.1.0 Adapter "icons-mfd-png" : 1.0.2 , installed 1.0.2 Adapter "icons-mfd-svg" : 1.0.2 Adapter "icons-open-icon-library-png": 0.1.3 , installed 0.1.3 Adapter "icons-ultimate-png": 1.0.1 , installed 1.0.1 Adapter "influxdb" : 1.6.3 Adapter "info" : 1.3.7 , installed 1.3.7 Adapter "innogy-smarthome": 0.3.2 Adapter "intesishome" : 0.1.2 Adapter "iogo" : 0.3.5 , installed 0.3.5 Adapter "iot" : 0.4.3 , installed 0.4.3 Adapter "iqontrol" : 0.0.28 , installed 0.0.28 Adapter "javascript" : 4.1.12 , installed 4.1.12 Adapter "jeelink" : 0.1.0 Controller "js-controller" : 1.5.11 , installed 1.5.11 Adapter "js2fs" : 0.1.5 Adapter "kecontact" : 0.1.0 Adapter "klf200" : 0.9.5 Adapter "km200" : 2.0.3 Adapter "knmi-weather" : 0.1.1 Adapter "knx" : 1.0.20 Adapter "kodi" : 1.0.0 Adapter "kress" : 2.5.5 Adapter "landroid" : 1.0.3 Adapter "landroid-s" : 2.5.5 Adapter "lcn" : 0.3.2 Adapter "lgtv" : 1.0.8 Adapter "lgtv-rs" : 0.0.4 Adapter "lgtv11" : 1.0.5 Adapter "lifx" : 0.1.0 Adapter "lightify" : 0.2.16 Adapter "link" : 0.4.2 Adapter "linkeddevices" : 0.2.1 Adapter "loxone" : 1.0.0 Adapter "luftdaten" : 0.0.7 Adapter "lupusec" : 1.1.7 Adapter "luxtronik1" : 0.0.7 Adapter "material" : 0.10.6 , installed 0.10.6 Adapter "maxcube" : 0.1.2 , installed 0.1.2 Adapter "maxcul" : 1.0.0 , installed 1.0.0 Adapter "mbus" : 1.1.1 Adapter "mclighting" : 0.0.12 Adapter "megad" : 1.2.1 Adapter "megadd" : 0.2.0 Adapter "megaesp" : 0.1.0 Adapter "mercedesme" : 0.0.6 Adapter "meross" : 1.0.0 Adapter "miele" : 0.1.5 Adapter "mihome" : 1.2.6 , installed 1.2.6 Adapter "mihome-airpurifier": 0.0.6 Adapter "mihome-lamp" : 1.1.0 Adapter "mihome-plug" : 0.2.0 Adapter "mihome-vacuum" : 1.1.5 , installed 1.1.5 Adapter "miio" : 0.0.7 Adapter "mikrotik" : 1.0.4 Adapter "milight" : 0.3.6 Adapter "milight-smart-light": 0.2.7 Adapter "mobile" : 0.5.0 , installed 0.5.0 Adapter "modbus" : 3.0.0 Adapter "moma" : 1.1.1 , installed 1.1.1 Adapter "mpd" : 1.0.2 Adapter "mqtt" : 2.1.0 , installed 2.1.0 Adapter "mqtt-client" : 1.1.1 , installed 1.1.1 Adapter "musiccast" : 0.1.0 Adapter "mysensors" : 2.0.0 Adapter "nanoleaf-lightpanels": 0.8.1 Adapter "nello" : 2.0.5 Adapter "netatmo" : 1.3.1 , installed 1.3.1 Adapter "nibeuplink" : 0.2.2 Adapter "node-red" : 1.8.0 , installed 1.8.0 Adapter "nuki" : 1.0.4 , installed 1.0.4 Adapter "nuki2" : 0.9.12 Adapter "nut" : 1.1.3 Adapter "oilfox" : 0.0.5 Adapter "onkyo" : 2.0.2 Adapter "onvif" : 0.0.2 Adapter "openhab" : 1.1.0 Adapter "opentherm" : 0.1.9 Adapter "openweathermap": 0.1.0 , installed 0.1.0 Adapter "opi" : 0.1.1 Adapter "oppoplayer" : 0.2.1 Adapter "owfs" : 0.5.0 Adapter "owntracks" : 0.6.2 Adapter "panasonic-viera": 1.0.2 Adapter "parser" : 1.0.7 Adapter "paw" : 0.3.2 Adapter "phantomjs" : 1.0.1 Adapter "piface" : 1.0.0 Adapter "pimatic" : 0.1.5 Adapter "ping" : 1.3.2 Adapter "places" : 0.7.0 Adapter "plex" : 0.3.0 Adapter "plexconnect" : 0.0.7 , installed 0.0.7 Adapter "pollenflug" : 1.0.3 Adapter "primelab" : 1.0.2 Adapter "proxmox" : 0.3.2 Adapter "proxy" : 1.0.2 Adapter "pushbullet" : 0.0.11 Adapter "pushover" : 1.0.4 , installed 1.0.4 Adapter "pushsafer" : 0.1.8 Adapter "radar2" : 1.0.7 , installed 1.0.7 Adapter "rflink" : 2.0.0 , installed 2.0.0 Adapter "rickshaw" : 1.0.0 , installed 1.0.0 Adapter "ring" : 1.0.4 Adapter "roadtraffic" : 0.0.2 Adapter "roomba" : 1.0.1 Adapter "rpi2" : 1.0.0 , installed 1.0.0 Adapter "s7" : 1.1.4 Adapter "samsung" : 0.2.9 Adapter "sayit" : 1.7.0 , installed 1.7.0 Adapter "sbfspot" : 2.3.2 Adapter "scenes" : 1.1.0 , installed 1.1.0 Adapter "shelly" : 3.0.2 Adapter "sia" : 1.0.2 Adapter "siegenia" : 1.0.0 Adapter "simple-api" : 2.0.2 , installed 2.0.2 Adapter "sma-em" : 0.5.3 Adapter "smappee" : 0.2.2 Adapter "smartmeter" : 1.2.2 Adapter "snips" : 1.1.7 Adapter "snmp" : 0.5.0 , installed 0.5.0 Adapter "socketio" : 2.1.1 , installed 2.1.1 Adapter "solarlog" : 0.1.5 Adapter "solarwetter" : 1.0.0 , installed 1.0.0 Adapter "sonnen" : 1.3.0 Adapter "sonoff" : 2.2.2 , installed 2.2.2 Adapter "sonos" : 1.7.7 , installed 1.7.7 Adapter "sonus" : 0.1.1 Adapter "sony-bravia" : 1.0.1 Adapter "sourceanalytix": 0.2.281 , installed 0.2.29 [Updateable] Adapter "spotify-premium": 1.0.0 , installed 1.0.0 Adapter "sql" : 1.9.5 Adapter "squeezebox" : 1.0.0 Adapter "squeezeboxrpc" : 0.8.10 Adapter "starline" : 1.0.0 Adapter "statistics" : 0.2.0 Adapter "stiebel-isg" : 1.4.4 Adapter "synology" : 0.0.4 Adapter "systeminfo" : 0.2.2 , installed 0.2.2 Adapter "tankerkoenig" : 2.0.6 Adapter "telegram" : 1.4.3 Adapter "terminal" : 0.1.2 Adapter "text2command" : 1.2.5 Adapter "tinker" : 0.1.4 Adapter "tr-064" : 0.4.18 , installed 0.4.18 Adapter "tradfri" : 2.3.0 Adapter "tunnelbroker-endpoint-updater": 0.0.1 Adapter "tuya" : 1.0.7 Adapter "tvspielfilm" : 1.0.4 Adapter "unifi" : 0.3.1 Adapter "upnp" : 1.0.11 , installed 1.0.11 Adapter "valloxmv" : 1.0.0 Adapter "vcard" : 0.0.9 Adapter "viessmann" : 0.9.5 Adapter "viessmannapi" : 1.3.2 Adapter "virtualpowermeter": 1.0.0 , installed 1.0.0 Adapter "vis" : 1.2.0 , installed 1.2.0 Adapter "vis-bars" : 0.1.4 Adapter "vis-canvas-gauges": 0.1.5 Adapter "vis-colorpicker": 1.1.1 Adapter "vis-fancyswitch": 1.1.0 Adapter "vis-google-fonts": 0.1.0 Adapter "vis-history" : 0.2.7 Adapter "vis-hqwidgets" : 1.1.2 , installed 1.1.2 Adapter "vis-jqui-mfd" : 1.0.12 Adapter "vis-justgage" : 1.0.0 , installed 1.0.0 Adapter "vis-keyboard" : 0.0.2 Adapter "vis-lcars" : 1.0.4 Adapter "vis-map" : 1.0.2 Adapter "vis-material" : 0.1.3 , installed 0.1.3 Adapter "vis-metro" : 1.1.2 , installed 1.1.2 Adapter "vis-players" : 0.1.5 Adapter "vis-plumb" : 1.0.2 Adapter "vis-rgraph" : 0.0.2 Adapter "vis-timeandweather": 1.1.7 , installed 1.1.7 Adapter "vis-weather" : 2.3.0 Adapter "vr200" : 1.0.0 Adapter "weatherunderground": 3.0.10 , installed 3.0.10 Adapter "web" : 2.4.1 , installed 2.4.1 Adapter "wetty" : 0.1.1 , installed 0.1.1 Adapter "wiffi-wz" : 2.0.1 Adapter "wifilight" : 0.2.0 Adapter "wm-bus" : 0.3.1 Adapter "wolf" : 0.9.2 Adapter "xbox" : 0.5.7 Adapter "xs1" : 1.0.2 Adapter "yahka" : 0.9.2 , installed 0.9.2 Adapter "yamaha" : 0.3.19 Adapter "yeelight-2" : 1.0.1 Adapter "yr" : 2.0.3 , installed 2.0.3 Adapter "zigbee" : 0.10.3 Adapter "zont" : 0.5.3 Adapter "zwave" : 1.4.1 erich@SmartHome:/opt/iobroker$ -
Mir gehen langsam die Optionen aus.
Bleibt die Frage wie und wann du damals ioBroker installiert hast.
Das gleiche gilt für den Fixer.
Systemctl müsste es eigentlich immer tun.
Welche Hardware, welches OS?
node -v nodejs -v npm -v -
steht ganz oben.
10.16
10.16
6.4.1installation ist schon ewig her. ubuntu schätze ich mit curl. ich weiß es nicht mehr
ubuntu 18.04
NUCfullbackup restore von der console aus ohne backitup.
geht das? -
@muckel sagte in IOBroker startet nach update auf jscontroller *.*.11 nicht:
fullbackup restore
Was ist das?
@muckel sagte in IOBroker startet nach update auf jscontroller *.*.11 nicht:
geht das?
Evtl. Nicht
Welches node war vorher drauf
-
vom backitup adapter habe ich ein fullbackup vom 25.05.2019.
ist ein tar.gz file.
am anfang denke ich war es ein 6.x
habe die 8.x ausgelassen und habe direkt auf 10.x upgedatet. hat damals funktioniert.wenn ich iobroker neu installiere auf das jetzige system ist dann alles jungfräulich?
curl -sL https://iobroker.net/install.sh | bash - -
-
ich verstehe nicht warum da gar nichts geht. so etwas hatte ich noch nie.
das mit der neuinstallation könnte funktionieren?
ich meine über das alte system drüberbügeln. -
erich@SmartHome:/opt/iobroker$ sudo iobroker restore 0 /opt/iobroker/node_modules/iobroker.js-controller/lib/setup/setupBackup.js:568 if (parseInt(name.trim(), 10).toString() === name.trim().toString()) { ^ TypeError: name.trim is not a function at BackupRestore.restoreBackup (/opt/iobroker/node_modules/iobroker.js-controller/lib/setup/setupBackup.js:568:27) at dbConnect (/opt/iobroker/node_modules/iobroker.js-controller/lib/setup.js:1474:28) at Object.connected (/opt/iobroker/node_modules/iobroker.js-controller/lib/setup.js:3087:29) at Immediate.<anonymous> (/opt/iobroker/node_modules/iobroker.js-controller/lib/states/statesInMemServer.js:184:26) at runCallback (timers.js:705:18) at tryOnImmediate (timers.js:676:5) at processImmediate (timers.js:658:5) erich@SmartHome:/opt/iobroker$das funktioniert auch nicht.
-
so, fullbackup in der cli eingespielt mit
sudo tar -xzvf total_2019_05_25-03_00_10_backupiobroker.tar.gz -C /opt/iobroker1.) system funktioniert wieder.
2.) ABER: beim updaten der adapter kommen folgende warnings und errors. Der/die Adapter werden allerdings upgedatet! KENNT DAS WER?
3.) jscontroller ist natürlich wieder auf 1.5.7
4.) ein update auf 1.5.11 trau ich mich jetzt nicht mehr machen.
...$ ./iobroker upgrade weatherunderground Update weatherunderground from @3.0.9 to @3.0.10 NPM version: 6.4.1 npm install iobroker.weatherunderground@3.0.10 --unsafe-perm --production --save --prefix "/opt/iobroker" (System call) ../src/contextify.cc: In static member function ‘static Nan::NAN_METHOD_RETURN_TYPE ContextifyContext::New(Nan::NAN_METHOD_ARGS_TYPE)’:../src/contextify.cc:62:74: warning: ‘v8::Local<v8::Object> v8::Value::ToObject() const’ is deprecated: Use maybe version [-Wdeprecated-declarations] ContextifyContext* ctx = new ContextifyContext(info[0]->ToObject()); ^ In file included from /home/erich/.node-gyp/10.16.0/include/node/node.h:63:0, from ../src/contextify.cc:1: /home/erich/.node-gyp/10.16.0/include/node/v8.h:10046:15: note: declared here Local<Object> Value::ToObject() const { ^~~~~ ../src/contextify.cc: In static member function ‘static v8::Local<v8::Context> ContextWrap::createV8Context(v8::Local<v8::Object>)’:../src/contextify.cc:131:68: error: no matching function for call to ‘v8::Function::NewInstance()’ Local<Object> wrapper = Nan::New(constructor)->NewInstance(); ^ In file included from /home/erich/.node-gyp/10.16.0/include/node/node.h:63:0, from ../src/contextify.cc:1: /home/erich/.node-gyp/10.16.0/include/node/v8.h:3993:44: note: candidate: v8::MaybeLocal<v8::Object> v8::Function::NewInstance(v8::Local<v8::Context>, int, v8::Local<v8::Value>*) const V8_WARN_UNUSED_RESULT MaybeLocal<Object> NewInstance( ^~~~~~~~~~~ /home/erich/.node-gyp/10.16.0/include/node/v8.h:3993:44: note: candidate expects 3 arguments, 0 provided /home/erich/.node-gyp/10.16.0/include/node/v8.h:3996:44: note: candidate: v8::MaybeLocal<v8::Object> v8::Function::NewInstance(v8::Local<v8::Context>) const V8_WARN_UNUSED_RESULT MaybeLocal<Object> NewInstance( ^~~~~~~~~~~ /home/erich/.node-gyp/10.16.0/include/node/v8.h:3996:44: note: candidate expects 1 argument, 0 provided ../src/contextify.cc:150:16: error: ‘class v8::ObjectTemplate’ has no member named ‘SetAccessCheckCallbacks’; did you mean ‘SetAccessCheckCallback’? otmpl->SetAccessCheckCallbacks(GlobalPropertyNamedAccessCheck, ^~~~~~~~~~~~~~~~~~~~~~~ SetAccessCheckCallback ../src/contextify.cc: In static member function ‘static void ContextWrap::GlobalPropertyGetter(v8::Local<v8::String>, const Nan::PropertyCallbackInfo<v8::Value>&)’:../src/contextify.cc:176:52: warning: ‘v8::Local<v8::Object> v8::Value::ToObject() const’ is deprecated: Use maybe version [-Wdeprecated-declarations] Local<Object> data = info.Data()->ToObject(); ^ In file included from /home/erich/.node-gyp/10.16.0/include/node/node.h:63:0, from ../src/contextify.cc:1: /home/erich/.node-gyp/10.16.0/include/node/v8.h:10046:15: note: declared here Local<Object> Value::ToObject() const { ^~~~~ ../src/contextify.cc:182:80: error: no matching function for call to ‘v8::Object::GetRealNamedProperty(v8::Local<v8::String>&)’ Local<Value> rv = Nan::New(ctx->sandbox)->GetRealNamedProperty(property); ^ In file included from /home/erich/.node-gyp/10.16.0/include/node/node.h:63:0, from ../src/contextify.cc:1: /home/erich/.node-gyp/10.16.0/include/node/v8.h:3562:43: note: candidate: v8::MaybeLocal<v8::Value> v8::Object::GetRealNamedProperty(v8::Local<v8::Context>, v8::Local<v8::Name>) V8_WARN_UNUSED_RESULT MaybeLocal<Value> GetRealNamedProperty( ^~~~~~~~~~~~~~~~~~~~ /home/erich/.node-gyp/10.16.0/include/node/v8.h:3562:43: note: candidate expects 2 arguments, 1 provided ../src/contextify.cc: In static member function ‘static void ContextWrap::GlobalPropertySetter(v8::Local<v8::String>, v8::Local<v8::Value>, const Nan::PropertyCallbackInfo<v8::Value>&)’: ../src/contextify.cc:192:52: warning: ‘v8::Local<v8::Object> v8::Value::ToObject() const’ is deprecated: Use maybe version [-Wdeprecated-declarations] Local<Object> data = info.Data()->ToObject(); ^ In file included from /home/erich/.node-gyp/10.16.0/include/node/node.h:63:0, from ../src/contextify.cc:1: /home/erich/.node-gyp/10.16.0/include/node/v8.h:10046:15: note: declared here Local<Object> Value::ToObject() const { ^~~~~ ../src/contextify.cc: In static member function ‘static void ContextWrap::GlobalPropertyQuery(v8::Local<v8::String>, const Nan::PropertyCallbackInfo<v8::Integer>&)’: ../src/contextify.cc:203:52: warning: ‘v8::Local<v8::Object> v8::Value::ToObject() const’ is deprecated: Use maybe version [-Wdeprecated-declarations] Local<Object> data = info.Data()->ToObject(); ^ In file included from /home/erich/.node-gyp/10.16.0/include/node/node.h:63:0, from ../src/contextify.cc:1: /home/erich/.node-gyp/10.16.0/include/node/v8.h:10046:15: note: declared here Local<Object> Value::ToObject() const { ^~~~~ ../src/contextify.cc:209:67: error: no matching function for call to ‘v8::Object::GetRealNamedProperty(v8::Local<v8::String>&)’ if (!Nan::New(ctx->sandbox)->GetRealNamedProperty(property).IsEmpty() || ^ In file included from /home/erich/.node-gyp/10.16.0/include/node/node.h:63:0, from ../src/contextify.cc:1: /home/erich/.node-gyp/10.16.0/include/node/v8.h:3562:43: note: candidate: v8::MaybeLocal<v8::Value> v8::Object::GetRealNamedProperty(v8::Local<v8::Context>, v8::Local<v8::Name>) V8_WARN_UNUSED_RESULT MaybeLocal<Value> GetRealNamedProperty( ^~~~~~~~~~~~~~~~~~~~ /home/erich/.node-gyp/10.16.0/include/node/v8.h:3562:43: note: candidate expects 2 arguments, 1 provided ../src/contextify.cc:210:71: error: no matching function for call to ‘v8::Object::GetRealNamedProperty(v8::Local<v8::String>&)’ !Nan::New(ctx->proxyGlobal)->GetRealNamedProperty(property).IsEmpty()) { ^ In file included from /home/erich/.node-gyp/10.16.0/include/node/node.h:63:0, from ../src/contextify.cc:1: /home/erich/.node-gyp/10.16.0/include/node/v8.h:3562:43: note: candidate: v8::MaybeLocal<v8::Value> v8::Object::GetRealNamedProperty(v8::Local<v8::Context>, v8::Local<v8::Name>) V8_WARN_UNUSED_RESULT MaybeLocal<Value> GetRealNamedProperty( ^~~~~~~~~~~~~~~~~~~~ /home/erich/.node-gyp/10.16.0/include/node/v8.h:3562:43: note: candidate expects 2 arguments, 1 provided ../src/contextify.cc: In static member function ‘static void ContextWrap::GlobalPropertyDeleter(v8::Local<v8::String>, const Nan::PropertyCallbackInfo<v8::Boolean>&)’:../src/contextify.cc:218:52: warning: ‘v8::Local<v8::Object> v8::Value::ToObject() const’ is deprecated: Use maybe version [-Wdeprecated-declarations] Local<Object> data = info.Data()->ToObject(); ^ In file included from /home/erich/.node-gyp/10.16.0/include/node/node.h:63:0, from ../src/contextify.cc:1: /home/erich/.node-gyp/10.16.0/include/node/v8.h:10046:15: note: declared here Local<Object> Value::ToObject() const { ^~~~~ ../src/contextify.cc: In static member function ‘static void ContextWrap::GlobalPropertyEnumerator(const Nan::PropertyCallbackInfo<v8::Array>&)’:../src/contextify.cc:229:52: warning: ‘v8::Local<v8::Object> v8::Value::ToObject() const’ is deprecated: Use maybe version [-Wdeprecated-declarations] Local<Object> data = info.Data()->ToObject(); ^ In file included from /home/erich/.node-gyp/10.16.0/include/node/node.h:63:0, from ../src/contextify.cc:1: /home/erich/.node-gyp/10.16.0/include/node/v8.h:10046:15: note: declared here Local<Object> Value::ToObject() const { ^~~~~ ../src/contextify.cc: In static member function ‘static Nan::NAN_METHOD_RETURN_TYPE ContextifyScript::RunInContext(Nan::NAN_METHOD_ARGS_TYPE)’:../src/contextify.cc:319:62: warning: ‘v8::Local<v8::Object> v8::Value::ToObject() const’ is deprecated: Use maybe version [-Wdeprecated-declarations] if (!ContextifyContext::InstanceOf(info[0]->ToObject())) ^ In file included from /home/erich/.node-gyp/10.16.0/include/node/node.h:63:0, from ../src/contextify.cc:1: /home/erich/.node-gyp/10.16.0/include/node/v8.h:10046:15: note: declared here Local<Object> Value::ToObject() const { ^~~~~ ../src/contextify.cc:322:95: warning: ‘v8::Local<v8::Object> v8::Value::ToObject() const’ is deprecated: Use maybe version [-Wdeprecated-declarations] ContextifyContext* ctx = Nan::ObjectWrap::Unwrap<ContextifyContext>(info[0]->ToObject()); ^ In file included from /home/erich/.node-gyp/10.16.0/include/node/node.h:63:0, from ../src/contextify.cc:1: /home/erich/.node-gyp/10.16.0/include/node/v8.h:10046:15: note: declared here Local<Object> Value::ToObject() const { ^~~~~ make: *** [Release/obj.target/contextify/src/contextify.o] Error 1gyp ERR! build error gyp ERR! stack Error: `make` failed with exit code: 2 gyp ERR! stack at ChildProcess.onExit (/usr/local/lib/node_modules/npm/node_modules/node-gyp/lib/build.js:262:23) gyp ERR! stack at ChildProcess.emit (events.js:198:13) gyp ERR! stack at Process.ChildProcess._handle.onexit (internal/child_process.js:248:12) gyp ERR! System Linux 4.15.0-50-generic gyp ERR! command "/usr/bin/node" "/usr/local/lib/node_modules/npm/node_modules/node-gyp/bin/node-gyp.js" "rebuild" gyp ERR! cwd /opt/iobroker/node_modules/contextify gyp ERR! node -v v10.16.0 gyp ERR! node-gyp -v v3.8.0gyp ERR! not ok npm WARN enoent ENOENT: no such file or directory, open '/opt/iobroker/node_modules/iobroker.js-controller/node_modules/socket.io-client/node_modules/engine.io-client/node_modules/engine.io-parser/node_modules/arraybuffer.slic/package.json'npm WARN enoent ENOENT: no such file or directory, open '/opt/iobroker/node_modules/iobroker.js-controller/node_modules/socket.io-client/node_modules/engine.io-client/node_modules/engine.io-parser/node_modules/base64-arraybuff/package.json' npm WARN enoent ENOENT: no such file or directory, open '/opt/iobroker/node_modules/iobroker.js-controller/node_modules/node-schedule/node_modules/cron-parser/node_modules/is-nan/node_modules/define-properties/node_modules/obj/package.json' npm WARN enoent ENOENT: no such file or directory, open '/opt/iobroker/node_modules/iobroker.js-controller/node_modules/yargs/node_modules/cliui/node_modules/wrap-ansi/node_modules/string-width/node_modules/is-fullwidth-code-p/package.json' npm WARN enoent ENOENT: no such file or directory, open '/opt/iobroker/node_modules/iobroker.js-controller/node_modules/prompt/node_modules/utile/node_modules/rimraf/node_modules/glob/node_modules/minimatch/node_modules/brace-/package.json'npm WARN enoent ENOENT: no such file or directory, open '/opt/iobroker/node_modules/iobroker.js-controller/node_modules/yargs/node_modules/os-locale/node_modules/execa/node_modules/cross-spawn/node_modules/which/node_modules/i/package.json' npm WARN winston-daily-rotate-file@1.7.2 requires a peer of winston@2.x but none is installed. You must install peer dependencies yourself. npm WARN optional SKIPPING OPTIONAL DEPENDENCY: osx-temperature-sensor@1.0.3 (node_modules/osx-temperature-sensor):npm WARN notsup SKIPPING OPTIONAL DEPENDENCY: Unsupported platform for osx-temperature-sensor@1.0.3: wanted {"os":"darwin","arch":"any"} (current: {"os":"linux","arch":"x64"}) npm WARN optional SKIPPING OPTIONAL DEPENDENCY: xpc-connection@0.1.4 (node_modules/xpc-connection):npm WARN notsup SKIPPING OPTIONAL DEPENDENCY: Unsupported platform for xpc-connection@0.1.4: wanted {"os":"darwin","arch":"any"} (current: {"os":"linux","arch":"x64"}) npm WARN optional SKIPPING OPTIONAL DEPENDENCY: contextify@0.1.15 (node_modules/contextify):npm WARN optional SKIPPING OPTIONAL DEPENDENCY: contextify@0.1.15 install: `node-gyp rebuild` npm WARN optional SKIPPING OPTIONAL DEPENDENCY: Exit status 1 npm install --production (System call) in "/opt/iobroker/node_modules/iobroker.weatherunderground" npm WARN deprecated gulp-util@3.0.8: gulp-util is deprecated - replace it, following the guidelines at https://medium.com/gulpjs/gulp-util-ca3b1f9f9ac5 npm WARN deprecated graceful-fs@3.0.11: please upgrade to graceful-fs 4 for compatibility with current and future versions of Node.js npm WARN deprecated minimatch@2.0.10: Please update to minimatch 3.0.2 or higher to avoid a RegExp DoS issue npm WARN deprecated natives@1.1.6: This module relies on Node.js's internals and will break at some point. Do not use it, and update to graceful-fs@4.x. npm WARN deprecated minimatch@0.2.14: Please update to minimatch 3.0.2 or higher to avoid a RegExp DoS issue npm WARN deprecated graceful-fs@1.2.3: please upgrade to graceful-fs 4 for compatibility with current and future versions of Node.js npm notice created a lockfile as package-lock.json. You should commit this file. got /opt/iobroker/node_modules/iobroker.weatherunderground/admin Update "system.adapter.weatherunderground.0" upload [3] weatherunderground.admin /opt/iobroker/node_modules/iobroker.weatherunderground/admin/wu.png wu.png image/png upload [2] weatherunderground.admin /opt/iobroker/node_modules/iobroker.weatherunderground/admin/words.js words.js application/javascript upload [1] weatherunderground.admin /opt/iobroker/node_modules/iobroker.weatherunderground/admin/index_m.html index_m.html text/html upload [0] weatherunderground.admin /opt/iobroker/node_modules/iobroker.weatherunderground/admin/DOCS.md DOCS.md text/markdown Adapter "weatherunderground" updated process exited with code 0 -
Ich muss jetzt mal weg!
Falls wer das Problem analysieren will bin ich gerne bereit am abend alles nochmals durchzuspielen.
es war definitiv jscontroller 1.5.7 > 1.5.11danke für die unterstützung!
liebe grüße erich
