Objekt Motion / Nomotion zu 1 oder 0

[ChrisXY]

also gibt es da keine Lösung ? Sonst ein Blockly was eigenes Setzen und auswerten?

[SBorg]

Da der LinkedDevice bisher nur die Gegenrichtung kann, ja ein kleines Blockly, oder warten bis es demnächst(?) implementiert wird.

[ChrisXY]

Dann warte ich So wichtig ist die Motion auswertung jetzt auch nicht . Hab gedacht das sim flot wenn ich bei Änderung auswähle er egal was da steht ein Strich oder sowas macht .. aber geht wohl nur bei true/false

[LausiD]

@ChrisXY
Was hast du für einen Bewegungsmelder in FHEM?
Hast du kein Objekt state_boolean im ioBroker angelegt bekommen?
Gruß
LausiD

[ChrisXY]

@LausiD Hab den HM-SEN-MDIR-O und kein state_boolean habe noch einen 2. der gibt halt true/false aus daher hat der 2. HM-SEC-MDIR den Status auch nicht .. aber komisch das der HM-SEN-MDIR-O sowas nicht macht

[LausiD]

@ChrisXY
Zeig mir doch mal ein jsonlist2 der 2 Bewegungsmelder

[ChrisXY]

okay wie geht das ? Bisher noch nicht gemacht

[LausiD]

@ChrisXY
Ok....in der Befehlszeile von FHEM: jsonlist2 "Name Bewegungsmelder" eingeben.

[ChrisXY]

@LausiD okay hier

{
  "Arg":"motion_stall",
  "Results": [
  {
    "Name":"motion_stall",
    "PossibleSets":"assignHmKey:noArg clear:readings,trigger,register,oldRegs,rssi,msgEvents,msgErrors,attack,all deviceRename fwUpdate getConfig:noArg getDevInfo:noArg getRegRaw peerBulk peerChan raw regBulk regSet reset:noArg sign:on,off unpair:noArg  peerSmart:Rauchmelder_Team,TeamVirtuell_Stall,VCCU_Btn4,VCCU_disarm,VCCU_lampe_stall_unterstand,VCCU_lampe_stall_unterstand_reitplatz,heizung_badoben_WindowRec,heizung_badoben_remote,heizung_badunten_WindowRec,heizung_badunten_remote,heizung_buro_WindowRec,heizung_buro_remote,heizung_esszimmer_WindowRec,heizung_esszimmer_remote,heizung_milena_WindowRec,heizung_milena_remote,heizung_schlafzimmer_WindowRec,heizung_schlafzimmer_remote,heizung_wohnzimmervitrine_WindowRec,heizung_wohnzimmervitrine_remote,pumpe_regenwasser_Sw,strom_aquarium_Sw,strom_server_Sw,strom_zaun ",
    "PossibleAttrs":"alias comment:textField-long eventMap:textField-long group room suppressReading userReadings:textField-long verbose:0,1,2,3,4,5 do_not_notify:1,0 showtime:1,0 rawToReadable unit expert:0_defReg,1_allReg,2_defReg+raw,3_allReg+raw,4_off,8_templ+default,12_templOnly,251_anything param readOnly:0,1 actAutoTry:0_off,1_on aesCommReq:1,0 model ignore:1,0 dummy:1,0 IODev IOList IOgrp rssiLog:1,0 actCycle hmKey hmKey2 hmKey3 readingOnDead:multiple,noChange,state,periodValues,periodString,channels subType:AlarmControl,KFM100,THSensor,blindActuator,blindActuatorSol,dimmer,display,keyMatic,motionAndBtn,motionDetector,no,outputUnit,powerMeter,powerSensor,pushButton,remote,repeater,rgb,senBright,sensRain,sensor,singleButton,siren,smokeDetector,swi,switch,thermostat,threeStateSensor,timer,tipTronic,virtual,winMatic .mId serialNr firmware .stc .devInfo actStatus autoReadReg:0_off,1_restart,2_pon-restart,3_onChange,4_reqStatus,5_readMissing,8_stateOnly burstAccess:0_off,1_auto msgRepeat hmProtocolEvents:0_off,1_dump,2_dumpFull,3_dumpTrigger aesKey:5,4,3,2,1,0  modelForce:ACTIONDETECTOR,ACTIONDETECTOR,ASH550,ASH550I,CCU-FHEM,CMM,DORMA_ATENT,DORMA_BRC-H,DORMA_RC-H,HM-CC-RT-DN,HM-CC-RT-DN-BOM,HM-CC-SCD,HM-CC-TC,HM-CC-VD,HM-DIS-EP-WM55,HM-DIS-TD-T,HM-DIS-WM55,HM-DW-WM,HM-ES-PMSW1-DR,HM-ES-PMSW1-PL,HM-ES-PMSW1-PL-DN-R1,HM-ES-PMSW1-PL-DN-R2,HM-ES-PMSW1-PL-DN-R3,HM-ES-PMSW1-PL-DN-R4,HM-ES-PMSW1-PL-DN-R5,HM-ES-PMSW1-SM,HM-ES-TX-WM,HM-HM-LC-DW-WM,HM-LC-AO-SM,HM-LC-BL1-FM,HM-LC-BL1-FM-2,HM-LC-BL1-PB-FM,HM-LC-BL1-SM,HM-LC-BL1-SM-2,HM-LC-BL1PBU-FM,HM-LC-DDC1-PCB,HM-LC-DIM1L-CV,HM-LC-DIM1L-CV-2,HM-LC-DIM1L-CV-644,HM-LC-DIM1L-PL,HM-LC-DIM1L-PL-2,HM-LC-DIM1L-PL-3,HM-LC-DIM1L-PL-644,HM-LC-DIM1PWM-CV,HM-LC-DIM1PWM-CV-2,HM-LC-DIM1T-CV,HM-LC-DIM1T-CV-2,HM-LC-DIM1T-CV-644,HM-LC-DIM1T-DR,HM-LC-DIM1T-FM,HM-LC-DIM1T-FM-2,HM-LC-DIM1T-FM-644,HM-LC-DIM1T-FM-LF,HM-LC-DIM1T-PL,HM-LC-DIM1T-PL-2,HM-LC-DIM1T-PL-3,HM-LC-DIM1T-PL-644,HM-LC-DIM1TPBU-FM,HM-LC-DIM1TPBU-FM-2,HM-LC-DIM2L-CV,HM-LC-DIM2L-SM,HM-LC-DIM2L-SM-2,HM-LC-DIM2L-SM-644,HM-LC-DIM2T-SM,HM-LC-DIM2T-SM,HM-LC-DIM2T-SM-2,HM-LC-JA1PBU-FM,HM-LC-RGBW-WM,HM-LC-SW1-BA-PCB,HM-LC-SW1-DR,HM-LC-SW1-FM,HM-LC-SW1-FM-2,HM-LC-SW1-PB-FM,HM-LC-SW1-PCB,HM-LC-SW1-PL,HM-LC-SW1-PL-3,HM-LC-SW1-PL-CT-R1,HM-LC-SW1-PL-CT-R2,HM-LC-SW1-PL-CT-R3,HM-LC-SW1-PL-CT-R4,HM-LC-SW1-PL-CT-R5,HM-LC-SW1-PL-DN-R1,HM-LC-SW1-PL-DN-R2,HM-LC-SW1-PL-DN-R3,HM-LC-SW1-PL-DN-R4,HM-LC-SW1-PL-DN-R5,HM-LC-SW1-PL-OM54,HM-LC-SW1-PL2,HM-LC-SW1-SM,HM-LC-SW1-SM-2,HM-LC-SW1-SM-ATMEGA168,HM-LC-SW1PBU-FM,HM-LC-SW2-DR,HM-LC-SW2-DR-2,HM-LC-SW2-FM,HM-LC-SW2-FM-2,HM-LC-SW2-PB-FM,HM-LC-SW2-SM,HM-LC-SW2PBU-FM,HM-LC-SW4-BA-PCB,HM-LC-SW4-DR,HM-LC-SW4-DR-2,HM-LC-SW4-PCB,HM-LC-SW4-PCB-2,HM-LC-SW4-SM,HM-LC-SW4-SM-2,HM-LC-SW4-SM-ATMEGA168,HM-LC-SW4-WM,HM-LC-SW4-WM-2,HM-MOD-EM-8,HM-MOD-EM-8BIT,HM-MOD-RE-8,HM-OU-CF-PL,HM-OU-CFM-PL,HM-OU-CFM-TW,HM-OU-CM-PCB,HM-OU-LED16,HM-PB-2-FM,HM-PB-2-WM,HM-PB-2-WM55,HM-PB-2-WM55-2,HM-PB-4-WM,HM-PB-4DIS-WM,HM-PB-4DIS-WM-2,HM-PB-6-WM55,HM-PBI-4-FM,HM-RC-12,HM-RC-12-B,HM-RC-12-SW,HM-RC-19,HM-RC-19-B,HM-RC-19-SW,HM-RC-2-PBU-FM,HM-RC-4,HM-RC-4-2,HM-RC-4-3,HM-RC-4-3-D,HM-RC-4-B,HM-RC-8,HM-RC-DIS-H-X-EU,HM-RC-KEY3,HM-RC-KEY3-B,HM-RC-KEY4-2,HM-RC-KEY4-3,HM-RC-P1,HM-RC-SEC3,HM-RC-SEC3-B,HM-RC-SEC4-2,HM-RC-SEC4-3,HM-SCI-3-FM,HM-SEC-CEN,HM-SEC-KEY,HM-SEC-KEY-O,HM-SEC-KEY-S,HM-SEC-MDIR,HM-SEC-MDIR-2,HM-SEC-MDIR-3,HM-SEC-RHS,HM-SEC-RHS-2,HM-SEC-SC,HM-SEC-SC-2,HM-SEC-SCO,HM-SEC-SD,HM-SEC-SD-2,HM-SEC-SFA-SM,HM-SEC-SIR-WM,HM-SEC-TIS,HM-SEC-WDS,HM-SEC-WDS-2,HM-SEC-WIN,HM-SEN-DB-PCB,HM-SEN-EP,HM-SEN-LI-O,HM-SEN-MDIR-O,HM-SEN-MDIR-O-2,HM-SEN-MDIR-O-3,HM-SEN-MDIR-SM,HM-SEN-MDIR-WM55,HM-SEN-RD-O,HM-SEN-WA-OD,HM-SWI-3-FM,HM-SYS-SRP-PL,HM-TC-IT-WM-W-EU,HM-WDC7000,HM-WDS10-TH-O,HM-WDS100-C6-O,HM-WDS100-C6-O-2,HM-WDS20-TH-O,HM-WDS30-OT2-SM,HM-WDS30-OT2-SM-2,HM-WDS30-T-O,HM-WDS40-TH-I,HM-WDS40-TH-I-2,HM-WS550,HM-WS550LCB,HM-WS550LCW,HM-WS550TECH,IS-WDS-TH-OD-S-R3,KFM-DISPLAY,KFM-SENSOR,KS550,KS550LC,KS550TECH,KS888,OLIGO-SMART-IQ-HM,PS-SWITCH,PS-TH-SENS,ROTO_ZEL-STG-RM-DWT-10,ROTO_ZEL-STG-RM-FDK,ROTO_ZEL-STG-RM-FEP-230V,ROTO_ZEL-STG-RM-FFK,ROTO_ZEL-STG-RM-FSA,ROTO_ZEL-STG-RM-FSS-UP3,ROTO_ZEL-STG-RM-FST-UP4,ROTO_ZEL-STG-RM-FWT,ROTO_ZEL-STG-RM-FZS,ROTO_ZEL-STG-RM-FZS-2,ROTO_ZEL-STG-RM-HS-4,ROTO_ZEL-STG-RM-WT-2,S550IA,SCHUECO_263-130,SCHUECO_263-131,SCHUECO_263-132,SCHUECO_263-133,SCHUECO_263-134,SCHUECO_263-135,SCHUECO_263-144,SCHUECO_263-145,SCHUECO_263-146,SCHUECO_263-147,SCHUECO_263-155,SCHUECO_263-157,SCHUECO_263-158,SCHUECO_263-160,SCHUECO_263-162,SCHUECO_263-167,SCHUECO_263-XXX,SENSOTIMER-ST-6,VIRTUAL,WDF-SOLAR,WS888 repPeers peerIDs tempListTmpl:none,defaultWeekplan, levelRange levelMap cyclicMsgOffset event-aggregator event-min-interval event-on-change-reading event-on-update-reading oldreadings stateFormat:textField-long timestamp-on-change-reading DbLogExclude DbLogInclude alarmDevice:Actor,Sensor alarmSettings cmdIcon devStateIcon:textField-long devStateStyle icon msgContactAudio msgContactLight msgContactMail msgContactPush msgContactScreen msgParams msgPriority msgRecipient msgRecipientAudio msgRecipientLight msgRecipientMail msgRecipientPush msgRecipientScreen msgRecipientText msgTitle msgTitleShrt msgType:text,push,mail,screen,light,audio,queue sortby webCmd webCmdLabel:textField-long widgetOverride userattr",
    "Internals": {
      ".triggerUsed": "0",
      "DEF": "461309",
      "FUUID": "5cce995c-f33f-09a2-4026-a0e84556b11b8ebe",
      "HMLANGW_MSGCNT": "168",
      "HMLANGW_RAWMSG": "050000830084104613090000000601C400",
      "HMLANGW_RSSI": "-131",
      "HMLANGW_TIME": "2019-06-05 16:33:51",
      "HMLAN_MSGCNT": "43",
      "HMLAN_RAWMSG": "E461309,0000,03E48BA9,FF,FFAC,0084104613090000000601C400",
      "HMLAN_RSSI": "-84",
      "HMLAN_TIME": "2019-06-05 16:33:51",
      "LASTInputDev": "HMLAN",
      "MSGCNT": "211",
      "NAME": "motion_stall",
      "NOTIFYDEV": "global",
      "NR": "839",
      "NTFY_ORDER": "50-motion_stall",
      "STATE": "noMotion",
      "TYPE": "CUL_HM",
      "chanNo": "01",
      "lastMsg": "No:00 - t:10 s:461309 d:000000 0601C400",
      "protCmdPend": "4 CMDs_pending",
      "protLastRcv": "2019-06-05 16:33:51",
      "protRcv": "178 last_at:2019-06-05 16:33:51",
      "protRcvB": "2 last_at:2019-06-04 05:09:12",
      "protState": "CMDs_pending",
      "rssi_at_HMLAN": "cnt:43 min:-103 max:-83 avg:-89.62 lst:-84 ",
      "rssi_at_HMLANGW": "cnt:166 min:-134 max:-37 avg:-129.78 lst:-131 ",
      "rssi_at_rpt_HMLANGW": "cnt:2 min:-133 max:-63 avg:-98 lst:-63 ",
      "rssi_broadcast": "cnt:1 min:-189 max:-189 avg:-189 lst:-189 "
    },
    "Readings": {
      ".D-devInfo": { "Value":"110100", "Time":"2019-05-06 09:13:34" },
      ".D-stc": { "Value":"81", "Time":"2019-05-06 09:13:34" },
      ".protLastRcv": { "Value":"2019-06-05 16:33:51", "Time":"2019-06-05 16:33:51" },
      "Activity": { "Value":"alive", "Time":"2019-06-01 16:45:59" },
      "D-firmware": { "Value":"1.6", "Time":"2019-05-06 09:13:34" },
      "D-serialNr": { "Value":"NEQ0118339", "Time":"2019-05-06 09:13:34" },
      "battery": { "Value":"ok", "Time":"2019-06-05 16:33:51" },
      "brightness": { "Value":"196", "Time":"2019-06-05 16:33:51" },
      "cover": { "Value":"closed", "Time":"2019-06-05 16:33:51" },
      "motion": { "Value":"off", "Time":"2019-06-05 16:37:39" },
      "motionCount": { "Value":"1_next:240s", "Time":"2019-06-05 16:33:37" },
      "motionDuration": { "Value":"296", "Time":"2019-06-05 16:37:39" },
      "powerOn": { "Value":"2019-06-05 16:33:04", "Time":"2019-06-05 16:33:04" },
      "recentStateType": { "Value":"info", "Time":"2019-06-05 16:33:51" },
      "state": { "Value":"noMotion", "Time":"2019-06-05 16:37:39" },
      "trigDst_broadcast": { "Value":"noConfig", "Time":"2019-05-23 17:17:26" },
      "trigger_cnt": { "Value":"1", "Time":"2019-06-05 16:33:37" }
    },
    "Attributes": {
      ".mId": "005D",
      "DbLogExclude": ".*",
      "DbLogInclude": "trigger_cnt,brightness,motionDuration",
      "IODev": "HMLAN",
      "actCycle": "024:00",
      "actStatus": "alive",
      "alias": "motion_stall",
      "autoReadReg": "4_reqStatus",
      "expert": "2_raw",
      "firmware": "1.6",
      "model": "HM-SEN-MDIR-O",
      "room": "CUL_HM,ioBroker",
      "serialNr": "NEQ0118339",
      "subType": "motionDetector"
    }
  }  ],
  "totalResultsReturned":1
}

[LausiD]

@ChrisXY
Danke..kannst FHEM Adapter über github aktualisieren
Nach Neustart sollte der Bewegungsmelder im ioBroker ein Objekt state_boolean mit true/false haben.
Gruß
LausiD

[ChrisXY]

@LausiD Mega Vielen DANK

[ChrisXY]

@LausiD

host.iobroker	2019-06-06 16:04:16.687	error	instance system.adapter.fhem.0 terminated with code 1 ()
Caught	2019-06-06 16:04:16.687	error	by controller[0]: at bootstrap_node.js:625:3
Caught	2019-06-06 16:04:16.687	error	by controller[0]: at startup (bootstrap_node.js:204:16)
Caught	2019-06-06 16:04:16.687	error	by controller[0]: at Function.Module.runMain (module.js:694:10)
Caught	2019-06-06 16:04:16.687	error	by controller[0]: at Function.Module._load (module.js:498:3)
Caught	2019-06-06 16:04:16.686	error	by controller[0]: at tryModuleLoad (module.js:506:12)
Caught	2019-06-06 16:04:16.686	error	by controller[0]: at Module.load (module.js:566:32)
Caught	2019-06-06 16:04:16.686	error	by controller[0]: at Object.Module._extensions..js (module.js:664:10)
Caught	2019-06-06 16:04:16.686	error	by controller[0]: at Module._compile (module.js:617:28)
Caught	2019-06-06 16:04:16.686	error	by controller[0]: at Object.runInThisContext (vm.js:139:10)
Caught	2019-06-06 16:04:16.686	error	by controller[0]: at createScript (vm.js:80:10)
Caught	2019-06-06 16:04:16.686	error	by controller[0]: SyntaxError: Invalid or unexpected token
Caught	2019-06-06 16:04:16.686	error	by controller[0]: ^^^^^^^^^^^
Caught	2019-06-06 16:04:16.686	error	by controller[0]: if (valOrg === 'motion' || valOrg === 'nomotion' || valOrg === 'noMotion' || valOrg === "Motion') {
Caught	2019-06-06 16:04:16.686	error	by controller[0]: /opt/iobroker/node_modules/iobroker.fhem/main.js:1725

EDIT: oder auch FHEM selbst neu tarten ? Hab nur den Adapter

[LausiD]

@ChrisXY
Nein, FHEM nicht neu starten
Sorry, habe mich auf Handy vertippt.
Nochmal von github aktualisieren:-(

[ChrisXY]

hmm habs nochmal von github geladen nu is immer noch 1.2.1 drauf guthub gibt es aber nur 1.2.0
Edit : leider taucht auch ein state_boolean auf.. komisch
Will das fhem auch nicht löschen hab angst da was zu verlieren hab da Logging für vieles Aktiv.

[LausiD]

@ChrisXY
Sorry, Änderung nebenher ging schief.
Aller guten Dinge sind drei
Kannst bitte nochmal von github aktualisieren....
Korrekt, die Version ist 1.2.1 und ändert sich auch nicht.
Beim Start FHEM Adapter werden folgende Zeilen ins Log geschrieben:
fhem.1 2019-06-06 20:16:08.526 info STEP 01 ===== buildDate 06.06.19b - check objects fhem.1
fhem.1 2019-06-06 20:16:08.460 info starting. Version 1.2.1 in /opt/iobroker/node_modules/iobroker.fhem, node: v8.15.1

Und jetzt sollte nach Neustart auch endgültig ein Objekt state_Boolean mit dem Wert true/false erscheinen

Gruß
LausiD

[ChrisXY]

@LausiD hehe macht ja nichts bin für jede änderung Dankbar. Super Adapter Was würde ich ohne den nur machen g