Uninstall - install problem
-
Ich habe es erst auch nicht hinbekommen.
Aber wenn smiling-jack sagt, dass es geht…
Also:
Gemäß Anleitung deinstallieren
Dann npm cache clean
Dann npm install iobroker.js-controller@0.5.15
Jetzt kommen die alten Pfade wieder!
cd /opt/iobroker/node_modules/iobroker.js-controller.
Dann chmod +x iobroker
Zuletzt ./iobroker restart
Dann läuft es.
Aber ich halte es nur für ein Provisorium.
Ich weiss nicht ob der autostart implementiert ist. Auf jeden Fall ist der symlink auf iobroker in /opt/iobroker nicht vorhanden.
Ob das durch updates später korrigiert wird, wage ich zu bezweifeln.
Ich würde diese Installation nur nutzen wenn ich bereit bin sie wieder platt zu machen
Gruß
Rainer
PS ich hoffe, dass alles richtig getippt ist und die mini handytastatur da nicht mist daraus gemacht hat.
Gesendet von meinem Cynus T7 mit Tapatalk
-
Hallo Rainer,
danke Dir für die Anleitung. Funktioniert einwandfrei. Jetzt kann ich mich der MQTT-"Forschung" weiter widmen. Ein Update auf "js-controller" von 0.5.15 auf 0.6 verkneife ich mir auf jeden Fall.
Gruß
akamia
-
Das solltest du (und alle anderen) dir auch verkneifen!
Es wird angeboten, läuft auch irgendwie, aber dann stürzt der Adapter admin andauernd ab.
Dann viel Spaß bei mqtt
Rainer
Gesendet von meinem Cynus T7 mit Tapatalk
-
Hallo zusammen,
nachdem nun bei mit einige Testinstallationen "zerschossen" sind habe ich eine neue VM aufgesetzt
nach der installation von nodejs
root@VMioBrokerMaster:~# node -v v0.10.38 root@VMioBrokerMaster:~#kommt
root@VMioBrokerMaster:~# npm install iobroker / > iobroker@0.5.1 install /root/node_modules/iobroker > node lib/setup.js npm install iobroker.js-controller --production --silent --prefix "/root/node_modules/iobroker/lib/../../../" /root/node_modules/iobroker.js-controller/lib/tools.js:452 if (adapter.substring(0, 'iobroker.'.length) == 'iobroker.') adapter = ada ^ TypeError: Cannot call method 'substring' of undefined at Object.getAdapterDir (/root/node_modules/iobroker.js-controller/lib/tools.js:452:17) at uploadAdapter (/root/node_modules/iobroker.js-controller/lib/setup.js:1615:28) at installAdapter (/root/node_modules/iobroker.js-controller/lib/setup.js:2054:9) at Socket. <anonymous>(/root/node_modules/iobroker.js-controller/lib/setup.js:2080:13) at Socket.onack (/root/node_modules/iobroker.js-controller/node_modules/socket.io-client/lib/socket.js:294:6) at Socket.onpacket (/root/node_modules/iobroker.js-controller/node_modules/socket.io-client/lib/socket.js:219:12) at Manager. <anonymous>(/root/node_modules/iobroker.js-controller/node_modules/socket.io-client/node_modules/component-bind/index.js:21:15) at Manager.Emitter.emit (/root/node_modules/iobroker.js-controller/node_modules/socket.io-client/node_modules/component-emitter/index.js:134:20) at Manager.ondecoded (/root/node_modules/iobroker.js-controller/node_modules/socket.io-client/lib/manager.js:274:8) at Decoder. <anonymous>(/root/node_modules/iobroker.js-controller/node_modules/socket.io-client/node_modules/component-bind/index.js:21:15) npm install iobroker.admin --production --silent --prefix "/root/node_modules/iobroker/lib/../../../" Write "./iobroker start" to start the ioBroker Non-critical error: ENOENT, no such file or directory '/root/node_modules/iobroker/lib/../../iobroker.js-controller/iobroker' iobroker@0.5.1 node_modules/iobroker └── yargs@1.2.6 (minimist@0.1.0) root@VMioBrokerMaster:~#</anonymous></anonymous></anonymous>auch der beschriebene WorkAround klappt nicht ganz
der js.controller kann zwar gestartet werden
jedoch läuft io.admin nicht. somit auch keine Möglichkeit aid das UI zuzugreifen
root@VMioBrokerMaster:~# cd /opt/iobroker/node_modules/iobroker.js-controller root@VMioBrokerMaster:/opt/iobroker/node_modules/iobroker.js-controller# ./iobroker restart Stopping ioBroker controller daemon... ioBroker controller daemon stopped. Starting ioBroker controller daemon... ioBroker controller daemon started. PID: 2686 root@VMioBrokerMaster:/opt/iobroker/node_modules/iobroker.js-controller# ps -A |grep io 6 ? 00:00:00 migration/0 191 ? 00:00:00 ext4-dio-unwrit 1691 ? 00:00:00 rpciod 1693 ? 00:00:00 nfsiod 2686 ? 00:00:00 io.js-controlle root@VMioBrokerMaster:/opt/iobroker/node_modules/iobroker.js-controller#Also heist es nun wohl: Warten bis der Urlauber zurück ist
-
Hast du es so:
http://forum.iobroker.org/viewtopic.php?p=3933#p3933
Versucht?
Gesendet von meinem Cynus T7 mit Tapatalk
-
Hallo
ich habe die neue version vom js-controller zurückgezogen
Eine Installation sollte wieder ganz normal funktioniren. Wichtig ist ein
npm cache cleanvorweg zumachen.
Zur info es wird jetzt wieder Version 0.5.15 installiert
Gruß
Steffen
-
@smiling-Jack:Hallo
ich habe die neue version vom js-controller zurückgezogen
Eine Installation sollte wieder ganz normal funktioniren. Wichtig ist ein
npm cache cleanvorweg zumachen.
Zur info es wird jetzt wieder Version 0.5.15 installiert
Gruß
Steffen `
OK. Getestet
root@VMioBrokerMaster:/opt/iobroker# npm cache clean root@VMioBrokerMaster:/opt/iobroker# npm install iobroker npm ERR! not a package /tmp/npm-2534-cP-PEs+a/1427660539077-0.291726277442649/tmp.tgz -\|/-\|/-\|/-\|/-\|/-\-\|/-\-\|/ > iobroker@0.5.1 install /opt/iobroker/node_modules/iobroker > node lib/setup.js npm install iobroker.js-controller --production --silent --prefix "/opt/iobroker/node_modules/iobroker/lib/../../../" npm install iobroker.admin --production --silent --prefix "/opt/iobroker/node_modules/iobroker/lib/../../../" Write "./iobroker start" to start the ioBroker Auto-start was enabled. Write "update-rc.d -f iobroker.sh remove" to disable auto-start iobroker is started. Go to "http://ip-addr:8081" to open the admin UI. iobroker@0.5.1 node_modules/iobroker yargs@1.2.6 (minimist@0.1.0) root@VMioBrokerMaster:/opt/iobroker# root@VMioBrokerMaster:/opt/iobroker# root@VMioBrokerMaster:/opt/iobroker# root@VMioBrokerMaster:/opt/iobroker# ps -A |grep io 6 ? 00:00:00 migration/0 170 ? 00:00:00 ext4-dio-unwrit 1679 ? 00:00:00 rpciod 1681 ? 00:00:00 nfsiod 2641 ? 00:00:00 io.js-controlle root@VMioBrokerMaster:/opt/iobroker#Leider wird admin nicht gestartet.
Manuell kann man auch nicht starten.
root@VMioBrokerMaster:/opt/iobroker# iobroker update Cannot get version of "virtual". Cannot get version of "geofency". update done Adapter "zwave" : 0.1.0 Adapter "yr" : 0.1.5 Adapter "web" : 0.2.6 Adapter "vis" : 0.2.11 Adapter "virtual" Adapter "sonos" : 0.1.6 Adapter "rickshaw" : 0.2.2 Adapter "pushover" : 0.1.0 Adapter "onkyo" : 0.1.0 Adapter "telnet" : 0.0.0 Adapter "socketio" : 0.2.3 Adapter "simple-api" : 0.0.4 Adapter "sayit" : 0.3.6 Adapter "ping" : 0.1.3 Adapter "node-red" : 0.1.9 Adapter "mqtt" : 0.1.7 Adapter "mobile" : 0.0.2 Adapter "legacy" : 0.1.12 Adapter "knx" : 0.0.1 Controller "js-controller" : 0.5.15 , installed 0.5.15 Adapter "javascript" : 0.3.0 Adapter "ical" : 0.1.0 Adapter "hmm" : 0.0.17 Adapter "hue" : 0.2.0 Adapter "hm-rpc" : 0.4.0 Adapter "hm-rega" : 0.2.1 Adapter "history" : 0.1.3 Adapter "highcharts" : 0.0.0 Adapter "graphite" : 0.1.0 Adapter "geofency" Adapter "example" : 0.1.1 , installed 0.1.1 Adapter "email" : 0.1.0 Adapter "dwd" : 0.1.7 Adapter "cul" : 0.0.2 Adapter "b-control-em" : 0.1.1 Adapter "artnet" : 0.0.3 Adapter "admin" : 0.3.26 , installed 0.3.26root@VMioBrokerMaster:/opt/iobroker# root@VMioBrokerMaster:/opt/iobroker# iobroker start admin Please enter instance of adapter, e.g. "web.0" root@VMioBrokerMaster:/opt/iobroker# iobroker start admin.0 Adapter "admin.0 does not exist. root@VMioBrokerMaster:/opt/iobroker# -
Komish kannst du mal den web einzelt nachinstalliren (npm install iobroker.web )
1191_0.jpg
1191_1.jpg -
@smiling-Jack:Komish kannst du mal den web einzelt nachinstalliren (npm install iobroker.web ) `
keine Änderung
root@VMioBrokerMaster:/opt/iobroker# npm install iobroker.web npm WARN deprecated object-keys@0.2.0: Please update to the latest object-keys > ws@0.4.31 install /opt/iobroker/node_modules/iobroker.web/node_modules/iobroker.socketio/node_modules/socket.io/node_modules/engine.io/node_modules/ws > (node-gyp rebuild 2> builderror.log) || (exit 0) > ws@0.4.31 install /opt/iobroker/node_modules/iobroker.web/node_modules/iobroker.socketio/node_modules/socket.io/node_modules/socket.io-client/node_modules/engine.io-client/node_modules/ws > (node-gyp rebuild 2> builderror.log) || (exit 0) iobroker.web@0.2.6 node_modules/iobroker.web ├── connect-flash@0.1.1 ├── iobroker.simple-api@0.0.4 ├── passport-local@1.0.0 (passport-strategy@1.0.0) ├── cookie-parser@1.3.4 (cookie@0.1.2, cookie-signature@1.0.6) ├── passport@0.2.1 (pause@0.0.1, passport-strategy@1.0.0) ├── xtend@2.0.6 (is-object@0.1.2, object-keys@0.2.0) ├── body-parser@1.5.2 (qs@0.6.6, media-typer@0.2.0, bytes@1.0.0, raw-body@1.3.0, depd@0.4.4, type-is@1.3.2, iconv-lite@0.4.4) ├── express-session@1.7.6 (utils-merge@1.0.0, cookie@0.1.2, cookie-signature@1.0.4, on-headers@1.0.0, parseurl@1.3.0, buffer-crc32@0.2.3, depd@0.4.4, debug@1.0.4, uid-safe@1.0.1) ├── express@4.4.5 (parseurl@1.0.1, utils-merge@1.0.0, merge-descriptors@0.0.2, cookie@0.1.2, cookie-signature@1.0.4, escape-html@1.0.1, range-parser@1.0.0, fresh@0.2.2, vary@0.1.0, qs@0.6.6, methods@1.0.1, serve-static@1.2.3, buffer-crc32@0.2.3, path-to-regexp@0.1.2, debug@1.0.2, type-is@1.2.1, accepts@1.0.7, proxy-addr@1.0.1, send@0.4.3) ├── request@2.38.0 (json-stringify-safe@5.0.0, aws-sign2@0.5.0, forever-agent@0.5.2, oauth-sign@0.3.0, stringstream@0.0.4, tunnel-agent@0.4.0, qs@0.6.6, node-uuid@1.4.3, mime-types@1.0.2, tough-cookie@0.12.1, http-signature@0.10.1, form-data@0.1.4, hawk@1.1.1) └── iobroker.socketio@0.2.3 (request@2.51.0, socket.io@1.1.0) root@VMioBrokerMaster:/opt/iobroker# ps -A |grep io 6 ? 00:00:00 migration/0 204 ? 00:00:00 ext4-dio-unwrit 1711 ? 00:00:00 rpciod 1713 ? 00:00:00 nfsiod root@VMioBrokerMaster:/opt/iobroker# iobroker restart ioBroker controller daemon is not running Starting ioBroker controller daemon... ioBroker controller daemon started. PID: 2596 root@VMioBrokerMaster:/opt/iobroker# ps -A |grep io 6 ? 00:00:00 migration/0 204 ? 00:00:00 ext4-dio-unwrit 1711 ? 00:00:00 rpciod 1713 ? 00:00:00 nfsiod 2596 ? 00:00:00 io.js-controlle -
nur zur Info, der workaround funktioniert nun grösstenteils.
ausser hm-rega - lässt sich nicht als instanz installieren. auch nicht bei manueller neu-installation (npm install iobroker.hm-rega)
vielleicht wäre grundsätzlich eine npm-repo (heisst das hier auch so?) mit der Vor-Version nicht schlecht - oder sonst eine Möglichkeit, Vor-Versionen zu installieren.
Wie auch immer , habe mich auf warten eingestellt.
-
gibts news - läuft die Installation wieder?
-
Also. Ich will immer noch nicht auf npm hoch legen, bis ich eine Bestätigung bekomme, dass es noch bei jemandem geht.
Es gibt aktuelle ioBroker.js-controller version 0.6.1. Die kann man mit
npm install https://github.com/ioBroker/ioBroker.js-controller/tarball/masterinstallieren.
Für die Neuinstallation, dann:
npm install iobroker npm install https://github.com/ioBroker/ioBroker.js-controller/tarball/masterKann jemand ausprobieren? Ich habe Windows, Debian und Ubuntu getestet. Update und Neuinstallation. Node.js 0.10.29/0.10.35/0.12.2
-
Habe eben mal schnell drüberinstalliert.
Keine Fehlermeldungen während des install.
Nach anschließendem reboot auch keine Fehlermeldungen im log beim Hochfahren!
RPi2 mit Raspian, nodejs 10.22.
Gruß
Rainer
-
Neuinstallation auf CubieTruck funktioniert auch gut –> Restart ist erforderlich
-
Hallo Bluefox,
Ist doch wohl noch irgendetwas im Argen
Habe heute morgen auf dem PC den admin geöffnet:
Habe es gestern nur vom Handy aus gemacht - habe da evtl. die unteren Zeilen nicht gesehen!
Weder ./iobroker restart noch reboot haben geholfen.
Auch ein erneutes
npm install https://github.com/ioBroker/ioBroker.js-controller/tarball/masterbrachte nichts, weder mit restart noch mit reboot
Jedoch keine Fehler während des Install oder nach dem reboot im log.
EDIT:
nach mehrmaligem reboot ist es jetzt auf einmal (ohne weiteren reboot) wieder ok !???
Im Vorfeld hatte ich Browsercache mehrfach gelöscht - ohne Änderungen ?!!???
Dafür fielen mir folgende Meldungen im log auf:
history-0 2015-04-15 10:43:02 info moved 18 history datapoints from Redis history.hm-rpc.0.JEQ0267518.1.HUMIDITY to CouchDB history.hm-rpc.0.JEQ0267518.1.HUMIDITY.20150415 history-0 2015-04-15 10:43:02 info moved 52 history datapoints from Redis history.hm-rpc.0.JEQ0267518.1.HUMIDITY to CouchDB history.hm-rpc.0.JEQ0267518.1.HUMIDITY.20150414 history-0 2015-04-15 10:43:02 info 18 remaining datapoints of history.hm-rpc.0.JEQ0267518.1.HUMIDITY history-0 2015-04-15 10:43:02 info moved 146 history datapoints from Redis history.hm-rpc.0.JEQ0267518.1.HUMIDITY to CouchDB history.hm-rpc.0.JEQ0267518.1.HUMIDITY.20150413 history-0 2015-04-15 10:43:02 info 52 remaining datapoints of history.hm-rpc.0.JEQ0267518.1.HUMIDITY history-0 2015-04-15 10:43:02 info moved 183 history datapoints from Redis history.hm-rpc.0.JEQ0267518.1.HUMIDITY to CouchDB history.hm-rpc.0.JEQ0267518.1.HUMIDITY.20150412 history-0 2015-04-15 10:43:02 info 146 remaining datapoints of history.hm-rpc.0.JEQ0267518.1.HUMIDITY history-0 2015-04-15 10:43:02 info moved 213 history datapoints from Redis history.hm-rpc.0.JEQ0267518.1.HUMIDITY to CouchDB history.hm-rpc.0.JEQ0267518.1.HUMIDITY.20150411 history-0 2015-04-15 10:43:02 info 183 remaining datapoints of history.hm-rpc.0.JEQ0267518.1.HUMIDITY history-0 2015-04-15 10:43:02 info moved 239 history datapoints from Redis history.hm-rpc.0.JEQ0267518.1.HUMIDITY to CouchDB history.hm-rpc.0.JEQ0267518.1.HUMIDITY.20150410 history-0 2015-04-15 10:43:02 info 213 remaining datapoints of history.hm-rpc.0.JEQ0267518.1.HUMIDITY history-0 2015-04-15 10:43:02 info moved 258 history datapoints from Redis history.hm-rpc.0.JEQ0267518.1.HUMIDITY to CouchDB history.hm-rpc.0.JEQ0267518.1.HUMIDITY.20150409 history-0 2015-04-15 10:43:02 info 239 remaining datapoints of history.hm-rpc.0.JEQ0267518.1.HUMIDITY history-0 2015-04-15 10:43:02 info moved 294 history datapoints from Redis history.hm-rpc.0.JEQ0267518.1.HUMIDITY to CouchDB history.hm-rpc.0.JEQ0267518.1.HUMIDITY.20150408 history-0 2015-04-15 10:43:02 info 258 remaining datapoints of history.hm-rpc.0.JEQ0267518.1.HUMIDITY history-0 2015-04-15 10:43:02 info moved 331 history datapoints from Redis history.hm-rpc.0.JEQ0267518.1.HUMIDITY to CouchDB history.hm-rpc.0.JEQ0267518.1.HUMIDITY.20150407 history-0 2015-04-15 10:43:02 info 294 remaining datapoints of history.hm-rpc.0.JEQ0267518.1.HUMIDITY history-0 2015-04-15 10:43:02 info moved 413 history datapoints from Redis history.hm-rpc.0.JEQ0267518.1.HUMIDITY to CouchDB history.hm-rpc.0.JEQ0267518.1.HUMIDITY.20150406 history-0 2015-04-15 10:43:02 info 331 remaining datapoints of history.hm-rpc.0.JEQ0267518.1.HUMIDITY history-0 2015-04-15 10:43:02 info [color]moved 445 history datapoints [b]from Redis[/b] history.hm-rpc.0.JEQ0267518.1.HUMIDITY [b]to CouchDB[/b][/color] history.hm-rpc.0.JEQ0267518.1.HUMIDITY.20150405 history-0 2015-04-15 10:43:02 info 413 remaining datapoints of history.hm-rpc.0.JEQ0267518.1.HUMIDITY history-0 2015-04-15 10:43:02 info moved 480 history datapoints from Redis history.hm-rpc.0.JEQ0267518.1.HUMIDITY to CouchDB history.hm-rpc.0.JEQ0267518.1.HUMIDITY.20150404 history-0 2015-04-15 10:43:02 info 445 remaining datapoints of history.hm-rpc.0.JEQ0267518.1.HUMIDITYmoved … datapoints from Redis history.hm-rpc.0.JEQ0267518.1.HUMIDITY to CouchDB
Gruß
Rainer
-
Konnte gestern keinen Adapter installieren.
-
Bei mir kommt jetzt - nach längerer Laufzeit - alle paar minuten von hmm und node-red Adaptern:
quad-pi 2015-04-15 14:02:44 error host.quad-pi instance system.adapter.node-red.0 terminated with code 7 (Adapter already running)auch die folgende Meldung nach ./iobroker update über putty ist recht amüsant:
Controller "js-controller" : 0.5.15 , installed 0.6.1 [Updateable]Gruß
Rainer
-
Also. Ich will immer noch nicht auf npm hoch legen, bis ich eine Bestätigung bekomme, dass es noch bei jemandem geht.
Es gibt aktuelle ioBroker.js-controller version 0.6.1. Die kann man mit
npm install https://github.com/ioBroker/ioBroker.js-controller/tarball/masterinstallieren.
Für die Neuinstallation, dann:
npm install iobroker npm install https://github.com/ioBroker/ioBroker.js-controller/tarball/masterKann jemand ausprobieren? Ich habe Windows, Debian und Ubuntu getestet. Update und Neuinstallation. Node.js 0.10.29/0.10.35/0.12.2 `
Neuinstall auf einer VM
root@VMioBrokerMaster:~# cd /opt/iobroker/ root@VMioBrokerMaster:/opt/iobroker# npm install https://github.com/ioBroker/ioBroker.js-controller/tarball/master > ws@0.5.0 install /opt/iobroker/node_modules/iobroker.js-controller/node_modules/socket.io/node_modules/engine.io/node_modules/ws > (node-gyp rebuild 2> builderror.log) || (exit 0) > ws@0.4.31 install /opt/iobroker/node_modules/iobroker.js-controller/node_modules/socket.io-client/node_modules/engine.io-client/node_modules/ws > (node-gyp rebuild 2> builderror.log) || (exit 0) \ > iobroker.js-controller@0.6.1 install /opt/iobroker/node_modules/iobroker.js-controller > node lib/setup.js setup first creating conf/iobroker.json object system.certificates created object system.repositories created object system.config created object enum.rooms created object system.group.user created object system.group.administrator created object _design/system created object system.user.admin created object system.meta.uuid created install adapter admin got /opt/iobroker/node_modules/iobroker.js-controller/node_modules/iobroker.admin/admin upload admin.admin /opt/iobroker/node_modules/iobroker.js-controller/node_modules/iobroker.admin/admin/index.html index.html text/html upload admin.admin /opt/iobroker/node_modules/iobroker.js-controller/node_modules/iobroker.admin/admin/admin.png admin.png image/png object system.adapter.admin created create instance admin object system.adapter.admin.0.uptime created object system.adapter.admin.0.memRss created object system.adapter.admin.0.memHeapTotal created object system.adapter.admin.0.memHeapUsed created object system.adapter.admin.0.connected created object system.adapter.admin.0.alive created object system.adapter.admin.0 created iobroker.js-controller@0.6.1 node_modules/iobroker.js-controller ├── daemonize2@0.4.2 ├── mime@1.3.4 ├── node-schedule@0.1.13 ├── ncp@2.0.0 ├── adm-zip@0.4.7 ├── node.extend@1.1.3 (is@2.1.0) ├── yargs@3.7.2 (camelcase@1.0.2, decamelize@1.0.0, window-size@0.1.0, wordwrap@0.0.2) ├── npm@2.7.6 ├── winston@1.0.0 (cycle@1.0.3, stack-trace@0.0.9, eyes@0.1.8, isstream@0.1.2, pkginfo@0.3.0, async@0.9.0, colors@1.0.3) ├── socket.io@1.3.5 (debug@2.1.0, has-binary-data@0.1.3, socket.io-adapter@0.3.1, socket.io-parser@2.2.4, engine.io@1.5.1) ├── tar.gz@0.1.1 (commander@1.1.1, tar@0.1.20, fstream@0.1.31) ├── request@2.55.0 (caseless@0.9.0, json-stringify-safe@5.0.0, aws-sign2@0.5.0, forever-agent@0.6.1, stringstream@0.0.4, oauth-sign@0.6.0, tunnel-agent@0.4.0, isstream@0.1.2, node-uuid@1.4.3, qs@2.4.1, combined-stream@0.0.7, mime-types@2.0.10, form-data@0.2.0, http-signature@0.10.1, hawk@2.3.1, bl@0.9.4, tough-cookie@0.12.1, har-validator@1.6.1) ├── socket.io-client@1.3.5 (to-array@0.1.3, indexof@0.0.1, component-bind@1.0.0, debug@0.7.4, backo2@1.0.2, object-component@0.0.3, component-emitter@1.1.2, has-binary@0.1.6, socket.io-parser@2.2.4, parseuri@0.0.2, engine.io-client@1.5.1) └── iobroker.admin@0.3.27 (connect-flash@0.1.1, xtend@4.0.0, passport-local@1.0.0, passport@0.2.1, cookie-parser@1.3.4, express-session@1.11.1, body-parser@1.12.2, express@4.12.3) root@VMioBrokerMaster:/opt/iobroker#root@VMioBrokerMaster:/opt/iobroker# npm install iobroker | > iobroker@0.5.1 install /opt/iobroker/node_modules/iobroker > node lib/setup.js npm install iobroker.js-controller --production --silent --prefix "/opt/iobroker/node_modules/iobroker/lib/../../../" npm install iobroker.admin --production --silent --prefix "/opt/iobroker/node_modules/iobroker/lib/../../../" Write "./iobroker start" to start the ioBroker Auto-start was enabled. Write "update-rc.d -f iobroker.sh remove" to disable auto-start iobroker is started. Go to "http://ip-addr:8081" to open the admin UI. iobroker@0.5.1 node_modules/iobroker └── yargs@1.2.6 (minimist@0.1.0) root@VMioBrokerMaster:/opt/iobroker#root@VMioBrokerMaster:/opt/iobroker# npm install https://github.com/ioBroker/ioBroker.js-controller/tarball/master > ws@0.5.0 install /opt/iobroker/node_modules/iobroker.js-controller/node_modules/socket.io/node_modules/engine.io/node_modules/ws > (node-gyp rebuild 2> builderror.log) || (exit 0) > ws@0.4.31 install /opt/iobroker/node_modules/iobroker.js-controller/node_modules/socket.io-client/node_modules/engine.io-client/node_modules/ws > (node-gyp rebuild 2> builderror.log) || (exit 0) \ > iobroker.js-controller@0.6.1 install /opt/iobroker/node_modules/iobroker.js-controller > node lib/setup.js setup first iobroker.js-controller@0.6.1 node_modules/iobroker.js-controller ├── mime@1.3.4 ├── daemonize2@0.4.2 ├── node-schedule@0.1.13 ├── ncp@2.0.0 ├── node.extend@1.1.3 (is@2.1.0) ├── adm-zip@0.4.7 ├── yargs@3.7.2 (decamelize@1.0.0, camelcase@1.0.2, window-size@0.1.0, wordwrap@0.0.2) ├── winston@1.0.0 (cycle@1.0.3, stack-trace@0.0.9, eyes@0.1.8, isstream@0.1.2, pkginfo@0.3.0, async@0.9.0, colors@1.0.3) ├── socket.io@1.3.5 (debug@2.1.0, has-binary-data@0.1.3, socket.io-adapter@0.3.1, engine.io@1.5.1, socket.io-parser@2.2.4) ├── tar.gz@0.1.1 (commander@1.1.1, tar@0.1.20, fstream@0.1.31) ├── request@2.55.0 (caseless@0.9.0, json-stringify-safe@5.0.0, aws-sign2@0.5.0, forever-agent@0.6.1, stringstream@0.0.4, oauth-sign@0.6.0, tunnel-agent@0.4.0, isstream@0.1.2, node-uuid@1.4.3, qs@2.4.1, combined-stream@0.0.7, form-data@0.2.0, mime-types@2.0.10, http-signature@0.10.1, bl@0.9.4, tough-cookie@0.12.1, hawk@2.3.1, har-validator@1.6.1) ├── socket.io-client@1.3.5 (to-array@0.1.3, indexof@0.0.1, component-bind@1.0.0, debug@0.7.4, backo2@1.0.2, object-component@0.0.3, component-emitter@1.1.2, has-binary@0.1.6, parseuri@0.0.2, socket.io-parser@2.2.4, engine.io-client@1.5.1) └── npm@2.7.6 root@VMioBrokerMaster:/opt/iobroker#controller = 0.6.1(Running: 0.5.15)
root@VMioBrokerMaster:/opt/iobroker# node -v
v0.10.38
Die Adapter wurden erst nach 2maligem Update angezeigt
Install VIS
iobroker 2015-04-15 18:25:27 info Cannot download json from https://raw.githubusercontent.com/ioBroker/ioBroker.zwave/master/io-package.json. Error: Error: ETIMEDOUT iobroker 2015-04-15 18:25:27 info Cannot download json from https://raw.githubusercontent.com/ioBroker/ioBroker.yr/master/io-package.json. Error: Error: ETIMEDOUT iobroker 2015-04-15 18:25:27 info Cannot download json from https://raw.githubusercontent.com/ioBroker/ioBroker.onkyo/master/io-package.json. Error: Error: ETIMEDOUT iobroker 2015-04-15 18:25:27 info npm install iobroker.vis --production --prefix "/opt/iobroker" (System call) iobroker 2015-04-15 18:25:22 info add visnach der Installation von YR wurde auch vis noch mit installiert
VMioBrokerMaster 2015-04-15 18:27:55 info iobroker object-keys@0.2.0: Please update to the latest object-keys VMioBrokerMaster 2015-04-15 18:27:55 info iobroker deprecated VMioBrokerMaster 2015-04-15 18:27:55 info iobroker VMioBrokerMaster 2015-04-15 18:27:55 info iobroker WARN VMioBrokerMaster 2015-04-15 18:27:55 info iobroker VMioBrokerMaster 2015-04-15 18:27:55 info iobroker npm VMioBrokerMaster 2015-04-15 18:27:52 info iobroker npm install iobroker.web --production --prefix "/opt/iobroker" (System call) VMioBrokerMaster 2015-04-15 18:27:47 info iobroker install adapter webAnschließen konnte vis aufgerufen werden
Gruß
derAuge
(Man sieht sich Samstag
) -
EDIT:
nach mehrmaligem reboot ist es jetzt auf einmal (ohne weiteren reboot) wieder ok !???
Im Vorfeld hatte ich Browsercache mehrfach gelöscht - ohne Änderungen ?!!??? `
Es liegt an Timeout beim Zugang zu npmjs.org. Vielleicht war der WebServer gestern überlastet. Trotzdem habe ich Timeout erhöht. -
Irgend etwas läuft da nicht sauber.
Habe eben über den admin nach updates suchen wollen. Dabei zeigt das log mir auf einmal an, dass er alle möglichen Adapter killt und auf terminating geht.
Nach dem wieder hochfahren gibt es wieder den Error 7, dass mindestens zwei Adapter doppelt laufen.
! ````
host-quad-pi 2015-04-16 15:45:23 info Restart adapter system.adapter.hmm.0 because enabled
host-quad-pi 2015-04-16 15:45:23 error instance system.adapter.hmm.0 terminated with code 7 (Adapter already running)
host-quad-pi 2015-04-16 15:45:21 info instance system.adapter.hmm.0 started with pid 1554
host-quad-pi 2015-04-16 15:45:17 info Restart adapter system.adapter.node-red.0 because enabled
host-quad-pi 2015-04-16 15:45:17 error instance system.adapter.node-red.0 terminated with code 7 (Adapter already running)
host-quad-pi 2015-04-16 15:45:15 info instance system.adapter.node-red.0 started with pid 1548
host-quad-pi 2015-04-16 15:44:58 info Update repository "default" under "conf/sources-dist.json"
host-quad-pi 2015-04-16 15:44:51 info Restart adapter system.adapter.hmm.0 because enabled
host-quad-pi 2015-04-16 15:44:51 error instance system.adapter.hmm.0 terminated with code 7 (Adapter already running)
host-quad-pi 2015-04-16 15:44:49 info instance system.adapter.hmm.0 started with pid 1510
host-quad-pi 2015-04-16 15:44:45 info Restart adapter system.adapter.node-red.0 because enabled
host-quad-pi 2015-04-16 15:44:45 error instance system.adapter.node-red.0 terminated with code 7 (Adapter already running)
host-quad-pi 2015-04-16 15:44:41 info instance system.adapter.node-red.0 started with pid 1493
javascript-0 2015-04-16 15:44:40 info received all states
javascript-0 2015-04-16 15:44:40 info received all objects
javascript-0 2015-04-16 15:44:37 info requesting all objects
javascript-0 2015-04-16 15:44:37 info requesting all states
javascript-0 2015-04-16 15:44:37 info starting. Version 0.3.0 in /opt/iobroker/node_modules/iobroker.javascript
host-quad-pi 2015-04-16 15:44:35 info instance system.adapter.yr.0 terminated with code 0 (OK)
host-quad-pi 2015-04-16 15:44:34 info instance system.adapter.javascript.0 started with pid 1485
email-0 2015-04-16 15:44:31 info starting. Version 0.1.0 in /opt/iobroker/node_modules/iobroker.email
yr-0 2015-04-16 15:44:30 info got weather data from yr.no
host-quad-pi 2015-04-16 15:44:29 info instance system.adapter.email.0 started with pid 1470
yr-0 2015-04-16 15:44:28 info starting. Version 0.1.5 in /opt/iobroker/node_modules/iobroker.yr
host-quad-pi 2015-04-16 15:44:26 info instance system.adapter.ical.0 terminated with code 0 (OK)
host-quad-pi 2015-04-16 15:44:25 info instance system.adapter.yr.0 started with pid 1464
host-quad-pi 2015-04-16 15:44:25 info instance scheduled system.adapter.yr.0 0 * * * *
ical-0 2015-04-16 15:44:19 info processing URL: calendar1 http://192.168.2.225:5000/fbsharing/IQExBXbr
host-quad-pi 2015-04-16 15:44:19 info Restart adapter system.adapter.hmm.0 because enabled
host-quad-pi 2015-04-16 15:44:19 error instance system.adapter.hmm.0 terminated with code 7 (Adapter already running)
host-quad-pi 2015-04-16 15:44:17 info instance system.adapter.hmm.0 started with pid 1449
ical-0 2015-04-16 15:44:17 info starting. Version 0.1.0 in /opt/iobroker/node_modules/iobroker.ical
host-quad-pi 2015-04-16 15:44:14 info instance system.adapter.ical.0 started with pid 1443
host-quad-pi 2015-04-16 15:44:13 info instance scheduled system.adapter.ical.0 0,30 * * * *
host-quad-pi 2015-04-16 15:44:11 info Restart adapter system.adapter.node-red.0 because enabled
host-quad-pi 2015-04-16 15:44:11 error instance system.adapter.node-red.0 terminated with code 7 (Adapter already running)
host-quad-pi 2015-04-16 15:44:10 info instance system.adapter.dwd.0 terminated with code 0 (OK)
host-quad-pi 2015-04-16 15:44:10 info instance system.adapter.node-red.0 started with pid 1428
ping-0 2015-04-16 15:44:07 info starting. Version 0.1.4 in /opt/iobroker/node_modules/iobroker.ping
host-quad-pi 2015-04-16 15:44:05 info instance system.adapter.ping.0 started with pid 1418
dwd-0 2015-04-16 15:44:04 info setting states
dwd-0 2015-04-16 15:44:04 info starting. Version 0.1.7 in /opt/iobroker/node_modules/iobroker.dwd
web-0 2015-04-16 15:44:02 info http server listening on port 8082
web-0 2015-04-16 15:44:02 info socket.io server listening on port 8082
host-quad-pi 2015-04-16 15:44:01 info instance system.adapter.dwd.0 started with pid 1403
host-quad-pi 2015-04-16 15:44:01 info instance scheduled system.adapter.dwd.0 5,20,35,50 * * * *
web-0 2015-04-16 15:44:01 info starting. Version 0.2.6 in /opt/iobroker/node_modules/iobroker.web
hm-rega-0 2015-04-16 15:43:57 info got state values
hm-rega-0 2015-04-16 15:43:56 info request state values
hm-rega-0 2015-04-16 15:43:56 info deleted 0 variables
hm-rega-0 2015-04-16 15:43:56 info added/updated 64 variables
hm-rega-0 2015-04-16 15:43:56 info got 64 variables
hm-rega-0 2015-04-16 15:43:55 info deleted 0 programs
hm-rega-0 2015-04-16 15:43:55 info added/updated 56 programs
hm-rega-0 2015-04-16 15:43:54 info got 56 programs
host-quad-pi 2015-04-16 15:43:53 info instance system.adapter.web.0 started with pid 1396
hm-rega-0 2015-04-16 15:43:53 info added/updated rooms to enum.rooms
hm-rega-0 2015-04-16 15:43:53 info added/updated functions to enum.functions
hm-rega-0 2015-04-16 15:43:53 info added/updated 6 favorites to enum.favorites
hm-rega-0 2015-04-16 15:43:53 info time difference local-ccu 0s
hm-rega-0 2015-04-16 15:43:53 info ReGaHSS 192.168.2.186 up
history-0 2015-04-16 15:43:53 info enabled logging of ping.0.quad-pi.192_168_2_120
history-0 2015-04-16 15:43:53 info enabled logging of ping.0.quad-pi.192_168_2_7
history-0 2015-04-16 15:43:53 info enabled logging of ping.0.quad-pi.192_168_2_142
history-0 2015-04-16 15:43:53 info enabled logging of ping.0.quad-pi.192_168_2_75
history-0 2015-04-16 15:43:53 info enabled logging of dwd.0.warning.severity
history-0 2015-04-16 15:43:53 info enabled logging of hm-rpc.0.LEQ0081020.1.TEMPERATURE
history-0 2015-04-16 15:43:53 info enabled logging of hm-rpc.0.LEQ0081020.1.HUMIDITY
history-0 2015-04-16 15:43:53 info enabled logging of hm-rpc.0.KEQ0963067.1.TEMPERATURE
history-0 2015-04-16 15:43:53 info enabled logging of hm-rpc.0.JEQ0459186.1.MOTION
history-0 2015-04-16 15:43:53 info enabled logging of hm-rpc.0.JEQ0267518.1.TEMPERATURE
history-0 2015-04-16 15:43:53 info enabled logging of hm-rpc.0.JEQ0267518.1.HUMIDITY
history-0 2015-04-16 15:43:53 info enabled logging of hm-rpc.0.JEQ0140901.1.TEMPERATURE
history-0 2015-04-16 15:43:53 info enabled logging of hm-rpc.0.JEQ0140901.1.HUMIDITY
history-0 2015-04-16 15:43:53 info enabled logging of system.host.quad-pi.load
history-0 2015-04-16 15:43:53 info enabled logging of system.host.quad-pi.mem
hm-rega-0 2015-04-16 15:43:51 info subscribe hm-rpc.0.BidCoS-RF:50.PRESS_SHORT
hm-rega-0 2015-04-16 15:43:51 info starting. Version 0.2.1 in /opt/iobroker/node_modules/iobroker.hm-rega
history-0 2015-04-16 15:43:53 info starting. Version 0.1.3 in /opt/iobroker/node_modules/iobroker.history
hm-rpc-0 2015-04-16 15:43:51 info xmlrpc -> 327 devices
hm-rpc-0 2015-04-16 15:43:51 info xmlrpc <- listDevices ["hm-rpc.0"]
hm-rpc-0 2015-04-16 15:43:51 info xmlrpc <- system.listMethods ["hm-rpc.0"]
hm-rpc-0 2015-04-16 15:43:51 info xmlrpc -> 192.168.2.186:2001 init ["http://192.168.2.190:2001","hm-rpc.0"]
hm-rpc-0 2015-04-16 15:43:51 info xmlrpc server is trying to listen on 192.168.2.190:2001
hm-rpc-0 2015-04-16 15:43:50 info starting. Version 0.4.0 in /opt/iobroker/node_modules/iobroker.hm-rpc
host-quad-pi 2015-04-16 15:43:50 info instance system.adapter.history.0 started with pid 1377
hm-rpc-0 2015-04-16 15:43:48 error no connection to objects DB
host-quad-pi 2015-04-16 15:43:46 info Update repository "default" under "conf/sources-dist.json"
host-quad-pi 2015-04-16 15:43:46 info instance system.adapter.hm-rega.0 started with pid 1371
admin-0 2015-04-16 15:43:45 info received all states
admin-0 2015-04-16 15:43:45 info received all objects
admin-0 2015-04-16 15:43:42 info Use link "http://localhost:8081" to configure.
admin-0 2015-04-16 15:43:42 info http server listening on port 8081
admin-0 2015-04-16 15:43:42 info requesting all objects
admin-0 2015-04-16 15:43:42 info requesting all states
admin-0 2015-04-16 15:43:42 info starting. Version 0.3.27 in /opt/iobroker/node_modules/iobroker.admin
hmm-0 2015-04-16 15:43:42 warn Reconnection to DB.
hmm-0 2015-04-16 15:43:41 warn Reconnection to DB.
host-quad-pi 2015-04-16 15:43:41 info instance system.adapter.hm-rpc.0 started with pid 1356
host-quad-pi 2015-04-16 15:43:37 info instance system.adapter.admin.0 started with pid 1354
host-quad-pi 2015-04-16 15:43:37 info starting 15 instances
host-quad-pi 2015-04-16 15:43:37 info 18 instances found
host-quad-pi 2015-04-16 15:43:37 info InMemoryDB connected
node-red-0 2015-04-16 15:43:38 warn Reconnection to DB.
inMem-objects 2015-04-16 15:43:37 info listening on port 9001
inMem-states 2015-04-16 15:43:37 info listening on port 9000
host-quad-pi 2015-04-16 15:43:37 info ip addresses: 192.168.2.190
node-red-0 2015-04-16 15:43:38 warn Reconnection to DB.
host-quad-pi 2015-04-16 15:43:37 info hostname: quad-pi
host-quad-pi 2015-04-16 15:43:37 info Copyright (c) 2014-2015 bluefox, hobbyquaker
host-quad-pi 2015-04-16 15:43:37 info ioBroker.js-controller version 0.6.1 js-controller starting
hmm-0 2015-04-16 15:43:36 info hmm exited with 0
node-red-0 2015-04-16 15:43:35 info node-red exited with 0
email-0 2015-04-16 15:43:35 info terminating with timeout
ping-0 2015-04-16 15:43:35 info terminating with timeout
javascript-0 2015-04-16 15:43:34 info terminating
admin-0 2015-04-16 15:43:34 info terminating
web-0 2015-04-16 15:43:34 info terminating
hm-rega-0 2015-04-16 15:43:34 info terminating
history-0 2015-04-16 15:43:34 info terminating
TypeError: 2015-04-16 15:43:33 error at Timer.listOnTimeout [as ontimeout] (timers.js:110:15)
TypeError: 2015-04-16 15:43:33 error at null._onTimeout (/opt/iobroker/node_modules/iobroker.js-controller/lib/statesInMemServer.js:464:25)
TypeError: 2015-04-16 15:43:33 error at States.change (/opt/iobroker/node_modules/iobroker.js-controller/controller.js:142:48)
TypeError: 2015-04-16 15:43:33 error Cannot read property 'time' of undefined
hm-rpc-0 2015-04-16 15:43:34 info terminating
hmm-0 2015-04-16 15:43:33 info kill hmm task
node-red-0 2015-04-16 15:43:33 info kill node-red task
web-0 2015-04-16 15:43:33 info terminated http server on port 8082
web-0 2015-04-16 15:43:33 info terminating http server on port 8082
hm-rpc-0 2015-04-16 15:43:33 info xmlrpc -> 192.168.2.186:2001 init ["http://192.168.2.190:2001",""]
admin-0 2015-04-16 15:43:33 info terminating http server on port 8081
uncaught 2015-04-16 15:43:33 error exception: Cannot read property 'time' of undefinedDaraufhin habe ich über den Reiter hosts einen restart des RPi2 ausgelöst. jetzt beschwert er sich beim runterfahren, dass diverse Adapetr immer noch laufen. entsprechend taucht da auch der error code 7 wieder auf >! ```` quad-pi 2015-04-16 15:45:48 info host.quad-pi Restart adapter system.adapter.admin.0 because enabled quad-pi 2015-04-16 15:45:48 error host.quad-pi instance system.adapter.admin.0 terminated with code 7 (Adapter already running) quad-pi 2015-04-16 15:45:48 info host.quad-pi Restart adapter system.adapter.admin.0 because enabled quad-pi 2015-04-16 15:45:48 error host.quad-pi instance system.adapter.admin.0 terminated with code 7 (Adapter already running) history.0 2015-04-16 15:45:43 warn history.0 Reconnection to DB. web.0 2015-04-16 15:45:45 warn web.0 Reconnection to DB. javascript.0 2015-04-16 15:45:45 warn javascript.0 Reconnection to DB. javascript.0 2015-04-16 15:45:45 warn javascript.0 Reconnection to DB. history.0 2015-04-16 15:45:42 warn history.0 Reconnection to DB. web.0 2015-04-16 15:45:45 warn web.0 Reconnection to DB. hm-rpc.0 2015-04-16 15:45:47 warn hm-rpc.0 Reconnection to DB. hm-rega.0 2015-04-16 15:45:43 warn hm-rega.0 Reconnection to DB. ping.0 2015-04-16 15:45:47 warn ping.0 Reconnection to DB. hm-rega.0 2015-04-16 15:45:43 warn hm-rega.0 Reconnection to DB. email.0 2015-04-16 15:45:47 warn email.0 Reconnection to DB. email.0 2015-04-16 15:45:47 warn email.0 Reconnection to DB. hm-rpc.0 2015-04-16 15:45:47 warn hm-rpc.0 Reconnection to DB. ping.0 2015-04-16 15:45:47 warn ping.0 Reconnection to DB. quad-pi 2015-04-16 15:45:47 info host.quad-pi instance system.adapter.hm-rpc.0 started with pid 1599 quad-pi 2015-04-16 15:45:47 info host.quad-pi instance system.adapter.hm-rpc.0 started with pid 1599 admin.0 2015-04-16 15:45:43 warn admin.0 Reconnection to DB. admin.0 2015-04-16 15:45:43 warn admin.0 Reconnection to DB. admin.0 2015-04-16 15:45:43 warn admin.0 Reconnection to DB. admin.0 2015-04-16 15:45:43 warn admin.0 Reconnection to DB. quad-pi 2015-04-16 15:45:37 info Adapter javascript still running quad-pi 2015-04-16 15:45:37 info Adapter email still running quad-pi 2015-04-16 15:45:37 info Adapter ping still running quad-pi 2015-04-16 15:45:37 info Adapter web still running quad-pi 2015-04-16 15:45:37 info Adapter history still running quad-pi 2015-04-16 15:45:37 info Adapter hm-rega still running quad-pi 2015-04-16 15:45:37 info Adapter hm-rpc still running quad-pi 2015-04-16 15:45:37 info Adapter admin still running quad-pi 2015-04-16 15:45:37 info host.quad-pi force terminated after 10s quad-pi 2015-04-16 15:45:37 info host.quad-pi received SIGTERM quad-pi 2015-04-16 15:45:37 info host.quad-pi received SIGTERM quad-pi 2015-04-16 15:45:36 info host.quad-pi received SIGTERM quad-pi 2015-04-16 15:45:36 info host.quad-pi received SIGTERM quad-pi 2015-04-16 15:45:35 info host.quad-pi received SIGTERM quad-pi 2015-04-16 15:45:35 info host.quad-pi received SIGTERM quad-pi 2015-04-16 15:45:34 info host.quad-pi received SIGTERM quad-pi 2015-04-16 15:45:34 info host.quad-pi received SIGTERM quad-pi 2015-04-16 15:45:33 info host.quad-pi received SIGTERM quad-pi 2015-04-16 15:45:33 info host.quad-pi received SIGTERM host-quad-pi 2015-04-16 15:45:32 info received SIGTERM host-quad-pi 2015-04-16 15:45:31 info received SIGTERM host-quad-pi 2015-04-16 15:45:30 info received SIGTERM host-quad-pi 2015-04-16 15:45:29 info received SIGTERM host-quad-pi 2015-04-16 15:45:28 info received SIGTERM host-quad-pi 2015-04-16 15:45:27 info received SIGTERM iobroker 2015-04-16 15:45:26 info exit 0 iobroker 2015-04-16 15:45:26 info Starting node restart.js iobroker 2015-04-16 15:45:26 info _restartich wollte eigentlich nicht wieder rebooten. Dann läuft er meistens stabil.
in den rechten Spalten wechselt es dauern von rot nach grün
jetzt ist doch reboot angesagtGruß
Rainer
