Befehle von Neeo nach ioBroker senden

UncleSam

@Kusi Die schliessenden Klammern fehlen beim http(...)

Kusi

@UncleSam das habe ich mir eben auch gedacht und beim zweiten Versuch getestet, aber dann kommt folgender Fehler:

pi@raspberrypi:~ $ node /home/pi/node_modules/neeo_driver-test
/home/pi/node_modules/neeo_driver-test/index.js:29
actualDriverObject.addButtonHandler((buttonName, deviceId) => {
                  ^

SyntaxError: Unexpected token '.'
    at wrapSafe (internal/modules/cjs/loader.js:1053:16)
    at Module._compile (internal/modules/cjs/loader.js:1101:27)
    at Object.Module._extensions..js (internal/modules/cjs/loader.js:1157:10)
    at Module.load (internal/modules/cjs/loader.js:985:32)
    at Function.Module._load (internal/modules/cjs/loader.js:878:14)
    at Function.executeUserEntryPoint [as runMain] (internal/modules/run_main.js:71:12)
    at internal/main/run_main_module.js:17:47

So sieht es jetzt komplett aus:

"use strict";
const neeoapi = require("neeo-sdk");
const http = require("http.min");

let actualDriverObject;
actualDriverObject = neeoapi.buildDevice("ioBroker"); // change "My first driver" to anything you like but keep the "" characters
actualDriverObject.setType("ACCESSOIRE"); // can be changed to "ACCESSOIRE" or "AVRECEIVER" or "DVB" or "DVD" or "GAMECONSOLE" or "LIGHT" or "MEDIAPLAYER" or "MUSICPLAYER" or "PROJECTOR" or "TV" or "VOD"
actualDriverObject.addButton({ name: "button-a", label: "Button A" }); // This makes a new button named button-a, on the remote its shown as Button A
actualDriverObject.addButton({ name: "button-b", label: "Button B" }); // This makes a new button named button-b, on the remote its shown as Button B
actualDriverObject.addButton({ name: "button-c", label: "Button C" }); // This makes a new button named button-c, on the remote its shown as Button C
actualDriverObject.addButton({ name: "button-d", label: "Button D" }); // This makes a new button named button-d, on the remote its shown as Button D
actualDriverObject.addButton({ name: "button-e", label: "Button E" }); // This makes a new button named button-d, on the remote its shown as Button E
actualDriverObject.addButton({ name: "button-f", label: "Button F" }); // This makes a new button named button-d, on the remote its shown as Button F
actualDriverObject.addButton({ name: "button-g", label: "Button G" }); // This makes a new button named button-d, on the remote its shown as Button G
actualDriverObject.addButton({ name: "button-h", label: "Button H" }); // This makes a new button named button-d, on the remote its shown as Button H

actualDriverObject.addSwitch({ name: 'Schalter', label: 'Schalter' },{
  setter: (deviceId, newValue) => {
    switchState = newValue;
    if (newValue) {
      http("http://192.168.1.15:8087/set/javascript.0.Eigene_Datenpunkte.Neeo-Switch?value=wahr")
    } else {
      http("http://192.168.1.15:8087/set/javascript.0.Eigene_Datenpunkte.Neeo-Switch?value=falsch")
    }
  },


// Here is the code that gets executed when a button is pressed.
actualDriverObject.addButtonHandler((buttonName, deviceId) => {
  console.log(`[CONTROLLER] ${buttonName} button pressed`);
  if (buttonName == "button-a") {
    http("http://192.168.1.15:8087/set/javascript.0.Eigene_Datenpunkte.Neeo-Button?value=A"); //Just sneds a http get, use this to controll devices that supports a http get
  }
  if (buttonName == "button-b") {
    http("http://192.168.1.15:8087/set/javascript.0.Eigene_Datenpunkte.Neeo-Button?value=B");
  }
  if (buttonName == "button-c") {
    http("http://192.168.1.15:8087/set/javascript.0.Eigene_Datenpunkte.Neeo-Button?value=C");
  }
  if (buttonName == "button-d") {
    http("http://192.168.1.15:8087/set/javascript.0.Eigene_Datenpunkte.Neeo-Button?value=D");
  }
  if (buttonName == "button-e") {
    http("http://192.168.1.15:8087/set/javascript.0.Eigene_Datenpunkte.Neeo-Button?value=E");
  }
  if (buttonName == "button-f") {
    http("http://192.168.1.15:8087/set/javascript.0.Eigene_Datenpunkte.Neeo-Button?value=F");
  }
  if (buttonName == "button-g") {
    http("http://192.168.1.15:8087/set/javascript.0.Eigene_Datenpunkte.Neeo-Button?value=G");
  }
  if (buttonName == "button-h") {
    http("http://192.168.1.15:8087/set/javascript.0.Eigene_Datenpunkte.Neeo-Button?value=H");
  }
});

// change this to set your NEEO brain IP. change 10.2.1.64 to the IP address of your NEEO brain.
const neeoSettings = {
  brain: "192.168.1.80",
  port: 1104,
  name: "eigeneTasten",
  devices: [actualDriverObject]
};

///////////////////////////////////////////////////////////////////////////////////////////////////
// Do not change the code below this point. ///////////////////////////////////////////////////////
///////////////////////////////////////////////////////////////////////////////////////////////////

///////////////////////////////////////////////////////////////////////////////////////////////////
// Do not change the code below this point. ///////////////////////////////////////////////////////
///////////////////////////////////////////////////////////////////////////////////////////////////

///////////////////////////////////////////////////////////////////////////////////////////////////
// Do not change the code below this point. ///////////////////////////////////////////////////////
///////////////////////////////////////////////////////////////////////////////////////////////////

///////////////////////////////////////////////////////////////////////////////////////////////////
// Do not change the code below this point. ///////////////////////////////////////////////////////
///////////////////////////////////////////////////////////////////////////////////////////////////
neeoapi
  .startServer(neeoSettings)
  .then(() => {
    console.log("# READY! use the NEEO app to search for: " + actualDriverObject.devicename);
    if (actualDriverObject.type == "ACCESSOIRE") {
      console.log("\r\n  ACCESOIRE devices do not have their own recipy slides.");
      console.log("  You need to add the buttons as shortcuts to an existing device slide,");
      console.log("  add a dummy device (search for dummy) and add the buttons as shortcut there or");
      console.log("  change the actualDriverObject.setType line to present this driver as a different device type.");
    }
  })
  .catch(err => {
    console.error("ERROR!", err);
    process.exit(1);
  });

UncleSam

@mickym sagte in Befehle von Neeo nach ioBroker senden:

actualDriverObject.addSwitch({ name: 'Schalter', label: 'Schalter' },{
  setter: (deviceId, newValue) => {
    switchState = newValue;
    http("http://192.168.1.15:8087/set/javascript.0.Eigene_Datenpunkte.Neeo-Switch?value=" + newValue);
  },
  getter: (deviceId) => switchState,})

Das hier geht, oder? Wenn du etwas änderst, musst du immer schauen, dass die öffnenden und schliessenden Klammern (rund, geschweift, eckig) übereinstimmen.

Ergo sollte es IMHO heissen:

actualDriverObject.addSwitch({ name: 'Schalter', label: 'Schalter' },{
  setter: (deviceId, newValue) => {
    switchState = newValue;
    if (newValue) {
      http("http://192.168.1.15:8087/set/javascript.0.Eigene_Datenpunkte.Neeo-Switch?value=wahr"
    } else {
      http("http://192.168.1.15:8087/set/javascript.0.Eigene_Datenpunkte.Neeo-Switch?value=falsch"
    }
  },
  getter: (deviceId) => switchState,})

Kusi

@UncleSam Gemäss Fehler beim vorherigen Laden des Treibers liegt der Fehler vermutlich an einem anderen Ort?

Zeilen 28 und 29 von index.js

// Here is the code that gets executed when a button is pressed.
actualDriverObject.addButtonHandler((buttonName, deviceId) => {

UncleSam

@Kusi Wenn Zeichen fehlen auf den vorherigen Zeilen, kann es sehr gut sein, dass der Fehler erst auf der nächsten Code-Zeile "zum Vorschein" kommt.

Kusi

@UncleSam Aus meiner Sicht fehlt irgendwo eine schliessende Klammer, denn die Öffnende ist bei

actualDriverObject.addSwitch(

Woher weis die If-Schleife eigentlich, ob der Wert/Schalter true oder false isch?

UncleSam

@UncleSam sagte in Befehle von Neeo nach ioBroker senden:

Ergo sollte es IMHO heissen:

actualDriverObject.addSwitch({ name: 'Schalter', label: 'Schalter' },{
  setter: (deviceId, newValue) => {
    switchState = newValue;
    if (newValue) {
      http("http://192.168.1.15:8087/set/javascript.0.Eigene_Datenpunkte.Neeo-Switch?value=wahr"
    } else {
      http("http://192.168.1.15:8087/set/javascript.0.Eigene_Datenpunkte.Neeo-Switch?value=falsch"
    }
  },
  getter: (deviceId) => switchState,})

Genau. Zeile 10.

Kusi

@UncleSam Das ist jetzt die Antwort beim Treiber-Start:

pi@raspberrypi:~ $ node /home/pi/node_modules/neeo_driver-test
/home/pi/node_modules/neeo_driver-test/index.js:25
      http("http://192.168.1.15:8087/set/javascript.0.Eigene_Datenpunkte.Neeo-Switch?value=wahr"
           ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^

SyntaxError: missing ) after argument list
    at wrapSafe (internal/modules/cjs/loader.js:1053:16)
    at Module._compile (internal/modules/cjs/loader.js:1101:27)
    at Object.Module._extensions..js (internal/modules/cjs/loader.js:1157:10)
    at Module.load (internal/modules/cjs/loader.js:985:32)
    at Function.Module._load (internal/modules/cjs/loader.js:878:14)
    at Function.executeUserEntryPoint [as runMain] (internal/modules/run_main.js:71:12)
    at internal/main/run_main_module.js:17:47

Klammer fehlten!

UncleSam

@Kusi sagte in Befehle von Neeo nach ioBroker senden:

Woher weis die If-Schleife eigentlich, ob der Wert/Schalter true oder false isch?

if (newValue) überprüft den übergebenen neuen Wert, wenn der true (oder etwas ähnliches) ist, wird das erste ausgeführt, sonst das zweite.

UncleSam

Sorry, falsches korrigiert:

actualDriverObject.addSwitch({ name: 'Schalter', label: 'Schalter' },{
  setter: (deviceId, newValue) => {
    switchState = newValue;
    if (newValue) {
      http("http://192.168.1.15:8087/set/javascript.0.Eigene_Datenpunkte.Neeo-Switch?value=wahr");
    } else {
      http("http://192.168.1.15:8087/set/javascript.0.Eigene_Datenpunkte.Neeo-Switch?value=falsch");
    }
  },
  getter: (deviceId) => switchState,})

Kusi

@UncleSam Wie beende ich denn jetzt den Treiber, ohne dass ich den Raspi neu starten muss??

pi@raspberrypi:~ $ node /home/pi/node_modules/neeo_driver-test
# READY! use the NEEO app to search for: ioBroker

  ACCESOIRE devices do not have their own recipy slides.
  You need to add the buttons as shortcuts to an existing device slide,
  add a dummy device (search for dummy) and add the buttons as shortcut there or
  change the actualDriverObject.setType line to present this driver as a different device type.

UncleSam

@Kusi Ctrl-C in dem Putty-Fenster in dem der driver läuft.

Kusi

@UncleSam sagte in Befehle von Neeo nach ioBroker senden:

@Kusi Ctrl-C in dem Putty-Fenster in dem der driver läuft.

Danke.

Laden des Treibers funktioniert, jedoch ändert der DP nicht.

Kusi

@UncleSam sagte in Befehle von Neeo nach ioBroker senden:

@Kusi Ctrl-C in dem Putty-Fenster in dem der driver läuft.

Gibt es auch eine Möglichkeit den Treiber zu stoppen, wenn dieser als Java aus ioBroker gestartet wird?

NEWS

Befehle von Neeo nach ioBroker senden

Support us

945
Online

31.9k
Users

80.2k
Topics

1.3m
Posts

NEWS

Befehle von Neeo nach ioBroker senden

Support us

945Online

31.9kUsers

80.2kTopics

1.3mPosts

945
Online

31.9k
Users

80.2k
Topics

1.3m
Posts