UNSOLVED bri, is not modifiable ?

[Michaelnorge]

Mein Log ist voll mit solchen Einträgen:

deconz.0	2020-10-14 17:01:17.896	warn	(1622) {"address":"/lights/41/state","description":"parameter, bri, is not modifiable. Device is set to off.","type":201}
deconz.0	2020-10-14 17:01:17.891	warn	(1622) {"address":"/lights/24/state","description":"parameter, bri, is not modifiable. Device is set to off.","type":201}
deconz.0	2020-10-14 16:47:14.208	warn	(1622) {"address":"/lights/41/state","description":"parameter, bri, is not modifiable. Device is set to off.","type":201}
deconz.0	2020-10-14 16:47:14.200	warn	(1622) {"address":"/lights/24/state","description":"parameter, bri, is not modifiable. Device is set to off.","type":201}
deconz.0	2020-10-14 16:37:31.339	warn	(1622) {"address":"/lights/41/state","description":"parameter, bri, is not modifiable. Device is set to off.","type":201}
deconz.0	2020-10-14 16:37:31.337	warn	(1622) {"address":"/lights/24/state","description":"parameter, bri, is not modifiable. Device is set to off.","type":201}
deconz.0	2020-10-14 16:36:07.789	warn	(1622) {"address":"/lights/32/state","description":"parameter, bri, is not modifiable. Device is set to off.","type":201}
deconz.0	2020-10-14 16:36:07.788	warn	(1622) {"address":"/lights/35/state","description":"parameter, bri, is not modifiable. Device is set to off.","type":201}
deconz.0	2020-10-14 16:36:07.751	warn	(1622) {"address":"/lights/34/state","description":"parameter, bri, is not modifiable. Device is set to off.","type":201}
deconz.0	2020-10-14 16:36:07.749	warn	(1622) {"address":"/lights/33/state","description":"parameter, bri, is not modifiable. Device is set to off.","type":201}
deconz.0	2020-10-14 16:36:07.746	warn	(1622) {"address":"/lights/31/state","description":"parameter, bri, is not modifiable. Device is set to off.","type":201}
deconz.0	2020-10-14 16:18:30.821	warn	(1622) {"address":"/lights/41/state","description":"parameter, bri, is not modifiable. Device is set to off.","type":201}
deconz.0	2020-10-14 16:18:30.817	warn	(1622) {"address":"/lights/24/state","description":"parameter, bri, is not modifiable. Device is set to off.","type":201}

Ich hatte dazu auch schon mal was im Forum gefunden (wo genau weiss ich nicht mehr) aber kann es nicht mehr wieder finden.

Es handelt sich um Trådfri-Lampen von IKEA.
Allerdings ändere ich den Wert "bri" überhaupt nicht, sondern nur "level" und (falls verfügbar) den "ct"-Wert.

Kann man diese Warnings irgendwie abstellen?

Grüße
Michael

[Jey Cee]

@Michaelnorge setzt bri (level ist das gleiche nur in %) bevor du deine Lampe eingeschalten hast.

[Michaelnorge]

@Jey-Cee Okay, aber abschaltbar ist das zur Zeit nicht, oder?

[Jey Cee]

@Michaelnorge nein warum auch, das ist eine Fehlermeldung von deConz. Bri setzen bevor Lampe an ist hat keinen Wert weil es nicht übernommen wird.

[Michaelnorge]

@Jey-Cee Ok, danke Dir!

[AlCalzone]

@Jey-Cee Interessanterweise sorgt eine Änderung der Helligkeit bei Nutzung des Gateways (also per tradfri-Adapter) dafür, dass die Lampe an (>0) bzw. aus (=0) geschaltet wird. Macht IMO auch Sinn.

[Jey Cee]

@AlCalzone jetzt wo du es sagst, das sollte beim deConz Adapter auch so sein. Hatte ich extra eingebaut weil deConz das nicht macht. Da muss ich mal danach schauen.