Zigbee bleibt gelb nach upgrade auf 1.4
-
@Mr-X
Für dein akutes Problem bringt dir das ganz sicher nichts. Aber ist halt Prophylaxe für andere Dinge.sudo systemctl set-default multi-user.target sudo rebootsind die Befehle um RL3 permanent einzurichten.
-
Achso OK.
habe ich mal ausgeführt, aber dann spare ich mir erstmal das Dow und upgrade gehampel.
Gestern musste ich ein Backup einspielen, weil das dann doch nicht lief. -
@Mr-X
Willst du dann jetzt noch weiter nach der eigentlichen Ursache schauen? -
@Thomas-Braun Eigentlich schon, hast du denn weitere Idee/Ansätze.
Habe zwar bei Arteck einen neuen Stick bestellt, aber bis dahin könnte das ganze hier ja funktionieren. -
@Mr-X
Dann müssen wir erstmal schauen, auf was wir da genau rumtanzen:which nodejs && nodejs -v && which node && node -v && which npm && npm -v && apt policy nodejs && whoami && who -rsudo apt update sudo apt dist-upgradeiobroker update iobroker upgrade -
pi@raspberrypi:~ $ which nodejs && nodejs -v && which node && node -v && which npm && npm -v && apt policy nodejs && whoami && who -r /usr/bin/nodejs v12.20.0 /usr/bin/node v12.20.0 /usr/bin/npm 6.14.8 nodejs: Installed: 12.20.0-1nodesource1 Candidate: 12.20.0-1nodesource1 Version table: *** 12.20.0-1nodesource1 500 500 https://deb.nodesource.com/node_12.x buster/main armhf Packages 100 /var/lib/dpkg/status 10.21.0~dfsg-1~deb10u1+rpi1 500 500 http://raspbian.raspberrypi.org/raspbian buster/main armhf Packages pi run-level 5 2020-12-14 22:34alles andere auch erledigt.
dann war der Adapter grün, nichts reagier.
Stick abgezogen, gewarten und dann ein reboot.Im log kam zunächst
zigbee.0 2020-12-15 20:23:33.945 info (1806) Installed Version: iobroker.zigbee@1.4.0 zigbee.0 2020-12-15 20:23:33.701 info (1806) Starting Zigbee npm ... zigbee.0 2020-12-15 20:23:33.513 info (1806) starting. Version 1.4.0 in /opt/iobroker/node_modules/iobroker.zigbee, node: v12.20.0, js-controller: 3.1.6Hier dann der letzte log auszug:
zigbee.0 2020-12-15 20:24:03.934 error at /opt/iobroker/node_modules/iobroker.zigbee/node_modules/@serialport/stream/lib/index.js:242:12 zigbee.0 2020-12-15 20:24:03.934 error at SerialPort._error (/opt/iobroker/node_modules/iobroker.zigbee/node_modules/@serialport/stream/lib/index.js:198:14) zigbee.0 2020-12-15 20:24:03.934 error at SerialPort.<anonymous> (/opt/iobroker/node_modules/iobroker.zigbee/node_modules/zigbee-herdsman/dist/adapter/z-stack/znp/znp.js:134:49) zigbee.0 2020-12-15 20:24:03.934 error at __awaiter (/opt/iobroker/node_modules/iobroker.zigbee/node_modules/zigbee-herdsman/dist/adapter/z-stack/znp/znp.js:23:12) zigbee.0 2020-12-15 20:24:03.934 error at new Promise (<anonymous>) zigbee.0 2020-12-15 20:24:03.934 error at /opt/iobroker/node_modules/iobroker.zigbee/node_modules/zigbee-herdsman/dist/adapter/z-stack/znp/znp.js:27:71 zigbee.0 2020-12-15 20:24:03.934 error at Generator.next (<anonymous>) zigbee.0 2020-12-15 20:24:03.934 error at Znp.<anonymous> (/opt/iobroker/node_modules/iobroker.zigbee/node_modules/zigbee-herdsman/dist/adapter/z-stack/znp/znp.js:136:32) zigbee.0 2020-12-15 20:24:03.934 error (1806) Error: Error while opening serialport 'Error: Error Resource temporarily unavailable Cannot lock port' zigbee.0 2020-12-15 20:24:03.933 error (1806) Failed to start Zigbee zigbee.0 2020-12-15 20:24:03.721 info (1806) Installed Version: iobroker.zigbee@1.4.0 zigbee.0 2020-12-15 20:24:03.706 info (1806) Starting Zigbee npm ... zigbee.0 2020-12-15 20:24:03.705 info (1806) Try to reconnect. 1 attempts left zigbee.0 2020-12-15 20:23:53.704 error at rejected (/opt/iobroker/node_modules/iobroker.zigbee/node_modules/zigbee-herdsman/dist/adapter/z-stack/adapter/zStackAdapter.js:25:65) zigbee.0 2020-12-15 20:23:53.704 error at Generator.throw (<anonymous>) zigbee.0 2020-12-15 20:23:53.704 error at ZStackAdapter.<anonymous> (/opt/iobroker/node_modules/iobroker.zigbee/node_modules/zigbee-herdsman/dist/adapter/z-stack/adapter/zStackAdapter.js:94:31) zigbee.0 2020-12-15 20:23:53.704 error (1806) Error: Failed to connect to the adapter (Error: SRSP - SYS - ping after 6000ms) zigbee.0 2020-12-15 20:23:53.703 error (1806) Failed to start Zigbee -
@Mr-X Lass den Stick immer stecken! Was ist das genau für eine Hardware?
lsusb -vWie verhält es sich, wenn du das System sauber rebootest?
sudo reboot -
Bus 002 Device 002: ID 0781:5581 SanDisk Corp. Ultra Couldn't open device, some information will be missing Device Descriptor: bLength 18 bDescriptorType 1 bcdUSB 3.00 bDeviceClass 0 bDeviceSubClass 0 bDeviceProtocol 0 bMaxPacketSize0 9 idVendor 0x0781 SanDisk Corp. idProduct 0x5581 Ultra bcdDevice 1.00 iManufacturer 1 iProduct 2 iSerial 3 bNumConfigurations 1 Configuration Descriptor: bLength 9 bDescriptorType 2 wTotalLength 0x002c bNumInterfaces 1 bConfigurationValue 1 iConfiguration 0 bmAttributes 0x80 (Bus Powered) MaxPower 896mA Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 0 bAlternateSetting 0 bNumEndpoints 2 bInterfaceClass 8 Mass Storage bInterfaceSubClass 6 SCSI bInterfaceProtocol 80 Bulk-Only iInterface 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x81 EP 1 IN bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0400 1x 1024 bytes bInterval 0 bMaxBurst 1 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x02 EP 2 OUT bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0400 1x 1024 bytes bInterval 0 bMaxBurst 15 Bus 002 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub Couldn't open device, some information will be missing Device Descriptor: bLength 18 bDescriptorType 1 bcdUSB 3.00 bDeviceClass 9 Hub bDeviceSubClass 0 bDeviceProtocol 3 bMaxPacketSize0 9 idVendor 0x1d6b Linux Foundation idProduct 0x0003 3.0 root hub bcdDevice 5.04 iManufacturer 3 iProduct 2 iSerial 1 bNumConfigurations 1 Configuration Descriptor: bLength 9 bDescriptorType 2 wTotalLength 0x001f bNumInterfaces 1 bConfigurationValue 1 iConfiguration 0 bmAttributes 0xe0 Self Powered Remote Wakeup MaxPower 0mA Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 0 bAlternateSetting 0 bNumEndpoints 1 bInterfaceClass 9 Hub bInterfaceSubClass 0 bInterfaceProtocol 0 Full speed (or root) hub iInterface 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x81 EP 1 IN bmAttributes 3 Transfer Type Interrupt Synch Type None Usage Type Data wMaxPacketSize 0x0004 1x 4 bytes bInterval 12 bMaxBurst 0 Bus 001 Device 003: ID 0451:16a8 Texas Instruments, Inc. Couldn't open device, some information will be missing Device Descriptor: bLength 18 bDescriptorType 1 bcdUSB 2.00 bDeviceClass 2 Communications bDeviceSubClass 0 bDeviceProtocol 0 bMaxPacketSize0 32 idVendor 0x0451 Texas Instruments, Inc. idProduct 0x16a8 bcdDevice 0.09 iManufacturer 1 iProduct 2 iSerial 3 bNumConfigurations 1 Configuration Descriptor: bLength 9 bDescriptorType 2 wTotalLength 0x0043 bNumInterfaces 2 bConfigurationValue 1 iConfiguration 0 bmAttributes 0x80 (Bus Powered) MaxPower 50mA Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 0 bAlternateSetting 0 bNumEndpoints 1 bInterfaceClass 2 Communications bInterfaceSubClass 2 Abstract (modem) bInterfaceProtocol 1 AT-commands (v.25ter) iInterface 0 CDC Header: bcdCDC 1.10 CDC ACM: bmCapabilities 0x02 line coding and serial state CDC Union: bMasterInterface 0 bSlaveInterface 1 CDC Call Management: bmCapabilities 0x00 bDataInterface 1 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x82 EP 2 IN bmAttributes 3 Transfer Type Interrupt Synch Type None Usage Type Data wMaxPacketSize 0x0040 1x 64 bytes bInterval 64 Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 1 bAlternateSetting 0 bNumEndpoints 2 bInterfaceClass 10 CDC Data bInterfaceSubClass 0 bInterfaceProtocol 0 iInterface 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x84 EP 4 IN bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0040 1x 64 bytes bInterval 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x04 EP 4 OUT bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0040 1x 64 bytes bInterval 0 Bus 001 Device 002: ID 2109:3431 VIA Labs, Inc. Hub Couldn't open device, some information will be missing Device Descriptor: bLength 18 bDescriptorType 1 bcdUSB 2.10 bDeviceClass 9 Hub bDeviceSubClass 0 bDeviceProtocol 1 Single TT bMaxPacketSize0 64 idVendor 0x2109 VIA Labs, Inc. idProduct 0x3431 Hub bcdDevice 4.21 iManufacturer 0 iProduct 1 iSerial 0 bNumConfigurations 1 Configuration Descriptor: bLength 9 bDescriptorType 2 wTotalLength 0x0019 bNumInterfaces 1 bConfigurationValue 1 iConfiguration 0 bmAttributes 0xe0 Self Powered Remote Wakeup MaxPower 100mA Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 0 bAlternateSetting 0 bNumEndpoints 1 bInterfaceClass 9 Hub bInterfaceSubClass 0 bInterfaceProtocol 0 Full speed (or root) hub iInterface 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x81 EP 1 IN bmAttributes 3 Transfer Type Interrupt Synch Type None Usage Type Data wMaxPacketSize 0x0001 1x 1 bytes bInterval 12 Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Couldn't open device, some information will be missing Device Descriptor: bLength 18 bDescriptorType 1 bcdUSB 2.00 bDeviceClass 9 Hub bDeviceSubClass 0 bDeviceProtocol 1 Single TT bMaxPacketSize0 64 idVendor 0x1d6b Linux Foundation idProduct 0x0002 2.0 root hub bcdDevice 5.04 iManufacturer 3 iProduct 2 iSerial 1 bNumConfigurations 1 Configuration Descriptor: bLength 9 bDescriptorType 2 wTotalLength 0x0019 bNumInterfaces 1 bConfigurationValue 1 iConfiguration 0 bmAttributes 0xe0 Self Powered Remote Wakeup MaxPower 0mA Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 0 bAlternateSetting 0 bNumEndpoints 1 bInterfaceClass 9 Hub bInterfaceSubClass 0 bInterfaceProtocol 0 Full speed (or root) hub iInterface 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x81 EP 1 IN bmAttributes 3 Transfer Type Interrupt Synch Type None Usage Type Data wMaxPacketSize 0x0004 1x 4 bytes bInterval 12 -
Das kommt nach einen reboot im Log:
Adapter ist nun grün. aber nach 10min. bis 1 Stunde wird der gelbzigbee.0 2020-12-15 21:25:16.898 error (1805) Device 0x90fd9ffffe8a09d4 "undefined" not described in statesMapping. zigbee.0 2020-12-15 21:25:16.676 info (1805) Zigbee started zigbee.0 2020-12-15 21:25:16.675 info (1805) 0xbc33acfffe0ebcf2 (addr 65202): HG06337 - Lidl Silvercrest smart plug (Router) zigbee.0 2020-12-15 21:25:16.667 info (1805) 0xbc33acfffe0ebd34 (addr 45265): HG06337 - Lidl Silvercrest smart plug (Router) zigbee.0 2020-12-15 21:25:16.664 info (1805) 0x842e14fffe556652 (addr 44502): HG06338 - Lidl Silvercrest 3 gang switch, possibly with USB (Router) zigbee.0 2020-12-15 21:25:16.661 info (1805) 0x0017880108b7ba14 (addr 55123): 8718699673147 - Philips Hue white A60 bulb E27 bluetooth (Router) zigbee.0 2020-12-15 21:25:16.659 info (1805) 0x90fd9ffffe8a09d4 (addr 21330): Not supported (model undefined)(Unknown) zigbee.0 2020-12-15 21:25:16.658 info (1805) 0x000b57fffec367c3 (addr 26913): LED1545G12 - IKEA TRADFRI LED bulb E26/E27 980 lumen, dimmable, white spectrum, opal white (Router) zigbee.0 2020-12-15 21:25:16.656 info (1805) 0x00158d0004041f71 (addr 53371): MCCGQ11LM - Xiaomi Aqara door & window contact sensor (EndDevice) zigbee.0 2020-12-15 21:25:16.654 info (1805) 0x005043c903241a3e (addr 47918): HS1SA - HEIMAN Smoke detector (EndDevice) zigbee.0 2020-12-15 21:25:16.651 info (1805) 0x005043c9032455a3 (addr 41038): HS1SA - HEIMAN Smoke detector (EndDevice) zigbee.0 2020-12-15 21:25:16.650 info (1805) 0x005043c90324538e (addr 39166): HS1SA - HEIMAN Smoke detector (EndDevice) zigbee.0 2020-12-15 21:25:16.648 info (1805) 0x005043c903245474 (addr 6269): HS1SA - HEIMAN Smoke detector (EndDevice) zigbee.0 2020-12-15 21:25:16.646 info (1805) 0x005043c903386694 (addr 44701): HS1SA - HEIMAN Smoke detector (EndDevice) zigbee.0 2020-12-15 21:25:16.644 info (1805) 0x00158d0004042192 (addr 65354): MCCGQ11LM - Xiaomi Aqara door & window contact sensor (EndDevice) zigbee.0 2020-12-15 21:25:16.643 info (1805) 0x000b57fffec1f6ec (addr 28034): E1524/E1810 - IKEA TRADFRI remote control (EndDevice) zigbee.0 2020-12-15 21:25:16.640 info (1805) 0x000b57fffe9e650d (addr 38936): ICPSHC24-30EU-IL-1 - IKEA TRADFRI driver for wireless control (30 watt) (Router) zigbee.0 2020-12-15 21:25:16.637 info (1805) 0x000b57fffe2b7dea (addr 5574): ICTC-G-1 - IKEA TRADFRI wireless dimmer (EndDevice) zigbee.0 2020-12-15 21:25:16.635 info (1805) 0x84182600000f74b5 (addr 9139): AC03641 - OSRAM LIGHTIFY LED Classic A60 clear (Router) zigbee.0 2020-12-15 21:25:16.633 info (1805) 0x90fd9ffffe6d32bc (addr 34524): LED1546G12 - IKEA TRADFRI LED bulb E26/E27 950 lumen, dimmable, white spectrum, clear (Router) zigbee.0 2020-12-15 21:25:16.631 info (1805) 0x00158d0003f045f4 (addr 42828): WSDCGQ11LM - Xiaomi Aqara temperature, humidity and pressure sensor (EndDevice) zigbee.0 2020-12-15 21:25:16.629 info (1805) 0x00158d0004252ae8 (addr 42379): WSDCGQ01LM - Xiaomi MiJia temperature & humidity sensor (EndDevice) zigbee.0 2020-12-15 21:25:16.627 info (1805) 0x00158d000425298b (addr 62172): WSDCGQ01LM - Xiaomi MiJia temperature & humidity sensor (Unknown) zigbee.0 2020-12-15 21:25:16.625 info (1805) 0x00158d0002a374e8 (addr 51270): MFKZQ01LM - Xiaomi Mi/Aqara smart home cube (EndDevice) zigbee.0 2020-12-15 21:25:16.617 info (1805) 0x00158d00041cd4e6 (addr 37917): MCCGQ11LM - Xiaomi Aqara door & window contact sensor (EndDevice) zigbee.0 2020-12-15 21:25:16.603 info (1805) Currently 23 devices are joined: zigbee.0 2020-12-15 21:25:16.592 info (1805) --> transmitPower : high zigbee.0 2020-12-15 21:25:16.578 info (1805) Coordinator firmware version: {"type":"zStack12","meta":{"transportrev":2,"product":0,"majorrel":2,"minorrel":6,"maintrel":3,"revision":20190223}} -
@Mr-X Das System liegt auf dem SanDisk Datenträger? Boot über USB?
-
@Thomas-Braun Ja, genau.
Und grün wurde er erst jetzt nach dem zweiten boot.
Momentan geht's, auch die Lidl Sachen.
Sobald ich merke dass er aussteigt, kann ich den Log posten.
Drehe jetzt ne Runde mit Doggi, und wenn ich wieder komme ist meist alles platt. -
@Mr-X Das ist der 2531-Stick, oder? Der kann mit 23 Geräten überfordert sein.
-
@Thomas-Braun Ja, das stimmt.
Mich wundert aber dass dann mit 1.3.1 alles läuft.
habe jetzt 3 Lidl Sachen angelernt, davor lief alles Tipi topi unter 1.3.1 -
@Mr-X Kann ja sein, dass die drei neuen Geräte genau die drei sind, bei denen der Stick ausgereizt ist.
-
@Thomas-Braun und das würde dann die errors kreieren?
Könnte jetzt noch die drei neue löschen und auf 1.4 bleiben.
Danke -
@Mr-X Nicht alle.
-
@Thomas-Braun
So, da wären wir wieder.
Ich habe gestern drei Geräte gelöscht. Gestern abend und heute früh vor der Arbeit lief alles.
Nun habe ich eben nachgeschaut: Adapter gelb.
Nach dem Adapter Neustart kommt das:zigbee.0 2020-12-16 11:19:50.275 info (1803) Terminated (ADAPTER_REQUESTED_TERMINATION): Without reason zigbee.0 2020-12-16 11:19:50.274 info (1803) terminating zigbee.0 2020-12-16 11:19:50.273 error at /opt/iobroker/node_modules/iobroker.zigbee/node_modules/zigbee-herdsman/dist/adapter/z-stack/adapter/zStackAdapter.js:27:71) zigbee.0 2020-12-16 11:19:50.273 error at Generator.next (<anonymous>) zigbee.0 2020-12-16 11:19:50.273 error at ZStackAdapter.<anonymous> (/opt/iobroker/node_modules/iobroker.zigbee/node_modules/zigbee-herdsman/dist/adapter/z-stack/adapter/zStackAdapter.js:453:28) zigbee.0 2020-12-16 11:19:50.273 error at ZStackAdapter.dataRequestExtended (/opt/iobroker/node_modules/iobroker.zigbee/node_modules/zigbee-herdsman/dist/adapter/z-stack/adapter/zStackAdapter.js:800:16) zigbee.0 2020-12-16 11:19:50.273 error at __awaiter (/opt/iobroker/node_modules/iobroker.zigbee/node_modules/zigbee-herdsman/dist/adapter/z-stack/adapter/zStackAdapter.js:23:12) zigbee.0 2020-12-16 11:19:50.273 error at new Promise (<anonymous>) zigbee.0 2020-12-16 11:19:50.273 error at /opt/iobroker/node_modules/iobroker.zigbee/node_modules/zigbee-herdsman/dist/adapter/z-stack/adapter/zStackAdapter.js:27:71 zigbee.0 2020-12-16 11:19:50.273 error at Generator.next (<anonymous>) zigbee.0 2020-12-16 11:19:50.273 error at ZStackAdapter.<anonymous> (/opt/iobroker/node_modules/iobroker.zigbee/node_modules/zigbee-herdsman/dist/adapter/z-stack/adapter/zStackAdapter.js:804:28) zigbee.0 2020-12-16 11:19:50.273 error at Znp.request (/opt/iobroker/node_modules/iobroker.zigbee/node_modules/zigbee-herdsman/dist/adapter/z-stack/znp/znp.js:273:19) zigbee.0 2020-12-16 11:19:50.273 error (1803) Failed to stop zigbee (Error: Cannot request when znp has not been initialized yet zigbee.0 2020-12-16 11:19:50.143 info (1803) Zigbee: disabling joining new devices. zigbee.0 2020-12-16 11:19:50.141 info (1803) cleaned everything up... zigbee.0 2020-12-16 11:19:50.139 info (1803) Got terminate signal TERMINATE_YOURSELF host.raspberrypi 2020-12-16 11:19:50.135 info stopInstance system.adapter.zigbee.0 send kill signal host.raspberrypi 2020-12-16 11:19:50.129 info stopInstance system.adapter.zigbee.0 (force=false, process=true) -
@Mr-X
Scheint mir an der Hardware zu liegen.https://www.zigbee2mqtt.io/information/FAQ.html#modemmanager-is-installed
Was sagt eigentlich
dmesgzu dem Stick? Irgendwo Meldungen zu undervoltage?
-
@Thomas-Braun Ne, nichts gesehen.
irgendwie scheint es jetzt mal einen Tag zu laufen.
Ich denke, ich belasse es erstmal so wie es ist, und warte auf den neuen Stick von Arteck.
Hoffe die Post braucht nicht allzulange.
Vielen Dank nochmals für deine Bemühungen !!!
