Sayit –> welche Möglichkeiten (HW) zur Ansage nutzt ihr?
-
OK.
Nächstes WE.
Moin erstmal Dienstreise.
Dann mal testen.
Gerne hier aber noch weitere Lösungen Posten.
-
Hat hier wer iobroker auf Linux installiert und überträgt die SayIt ansagen via Bluetooth (Dongle) an einen Bluetooth Lautsprecher?
-
Hat hier wer iobroker auf Linux installiert und überträgt die SayIt ansagen via Bluetooth (Dongle) an einen Bluetooth Lautsprecher? `
Ich habe die Bluetooth Kopplung nicht auf dem NUC unter Debian ans laufen bekommen.Wenn mir da jemand helfen könnte gerne!
Vielleicht schaffe ich es ja den pi3 freizuschaufeln und es da mal zu versuchen.
Gruß
Rainer
-
Ok.
Debian Wheezy habe ich installiert.
Hoffe ich finde am WE Zeit dafür.
Hast du einen Dongle benutzt oder hat der "NUC" Bluetooth on Board?
Was genau hat denn bei dir nicht funktioniert?
Nur mal so als vorab Info
-
Der nuch hat Bluetooth an bord.
Vielleicht kam debian jessie noch nicht mit den treibern klar.
Ich habe auf dem nuc zwar angeblich die Bindung hinbekommen, auch das trust, aber der Lautsprecher meldete kein Connected.
Gruß
Rainer
-
Ok.
Mein Homeserver hat kein Bluetooth. Eben einen Dongle bestellt zum testen.
Hoffe das es irgendwie klappt.
-
Hallo zusammen,
das wird bei mir auch gerade ein aktuelles Thema
Zur Zeit nutze ich den HM MP3-Funk-Gong an meinen Visaton Deckenlautsprechern um ein paar Ansagen ala "Alarmanlage wird aktiviert" zu machen.
Klappt sehr gut, ist aber halt alles wenig dynamisch.
Um Sayit (vorerst parallel) über die selben Lautsprechern zu nutzen ist mir nun der HiFiBerry AMP+ ins Auge gefallen.
Link: https://www.hifiberry.com/
Was meint Ihr zu dem Teil?
Das wäre mit einem RPI3 zusammen schon fast gleich auf mit der Anschaffung einer Sonos Play 1.
Wie könnte man den RPI dann ansprechen? Eine 2. IOBroker Installation (Multihost) wäre mir allein von der Wartung wahrscheinlich zu aufwändig (Updates, Sicherung etc.)
VG
easyhoo
-
Hi,
Kannst vielleicht einen MPD Server oder Deamon installieren.
Dann in SayIt Ansage über MPD wählen .
Gesendet von iPhone mit Tapatalk
-
Ich nutze ein Acer Iconia A1-810 mit Home24 Mediaplayer. Mehr ist nicht notwendig. Sprachansagen kommen klar und deutlich.
Allerdings findet meine Frau die Ansagen ziemlich doof, so dass ich die meisten wieder deaktiviert habe.
Sobald die HomeMatic eine Bewegung bei Abwesenheit registriert, kommt aber die Ansage:
"Ihr Einbruch wurde registriert. Wir haben bereits die Polizei verständigt."
Vielleicht sollte ich das noch mit einer Polizeisirene untermalen.
Bis dann,
Thorsten
-
Coole Ansage! [emoji106]
Zur Zeit ist meine Frau nur von dem Echo genervt.
Habe aber nur 2 Ansagen bisher.
Gesendet von iPhone mit Tapatalk
-
Hi,
ist ja fast Wochenende also gestern und heute mal ein wenig mit Bluetooth experimentiert.
Aktuell folgender Status:
Bluetooth LS paired und connected:
bt-device -i 8C:DE:52:55:28:5B [8C:DE:52:55:28:5B] Name: PHILIPS BT3500 Alias: PHILIPS BT3500 [rw] Address: 8C:DE:52:55:28:5B Icon: audio-card Class: 0x240414 Paired: 1 Trusted: 1 [rw] Blocked: 0 [rw] Connected: 1 UUIDs: [Headset, AudioSink, AVRemoteControlTarget, AVRemoteControl, Handsfree, 0000112e-0000-1000-8000-00805f9b34fb, PnPInformation]Audio ausgabe test funktioniert:
mplayer -ao alsa:device=bluetooth http://1live-diggi.akacast.akamaistream.net/7/965/119435/v1/gnl.akacast.akamaistream.net/1live-diggi Failed to read /etc/mplayer/mplayer.conf.local: No such file or directory Warning unknown option include at line 177 MPlayer 1.1-4.7 (C) 2000-2012 MPlayer Team Can't open joystick device /dev/input/js0: No such file or directory Can't init input joystick mplayer: could not connect to socket mplayer: No such file or directory Failed to open LIRC support. You will not be able to use your remote control. Playing http://1live-diggi.akacast.akamaistream.net/7/965/119435/v1/gnl.akacast.akamaistream.net/1live-diggi. Resolving 1live-diggi.akacast.akamaistream.net for AF_INET6... Couldn't resolve name for AF_INET6: 1live-diggi.akacast.akamaistream.net Resolving 1live-diggi.akacast.akamaistream.net for AF_INET... Connecting to server 1live-diggi.akacast.akamaistream.net[195.27.154.157]: 80... Name : 1Livediggi, Westdeutscher Rundfunk Koeln Genre : WDR Website: http://www.1live.de Public : yes Cache size set to 320 KBytes Cache fill: 0.00% (0 bytes) ICY Info: StreamTitle='1LIVE diGGi auch als Stream: 1livediggi.de'; Cache fill: 12.50% (40960 bytes) Audio only file format detected. ========================================================================== Opening audio decoder: [mpg123] MPEG 1.0/2.0/2.5 layers I, II, III AUDIO: 48000 Hz, 2 ch, s16le, 128.0 kbit/8.33% (ratio: 16000->192000) Selected audio codec: [mpg123] afm: mpg123 (MPEG 1.0/2.0/2.5 layers I, II, III) ========================================================================== AO: [alsa] 48000Hz 2ch s16le (2 bytes per sample) Video: no video Starting playback... A: 2.1 (02.1) of -0.0 (unknown) 0.4% 41% ICY Info: StreamTitle='Infos und Playlist auch im Netz: 1livediggi.de'; A: 3.5 (03.4) of -0.0 (unknown) 0.4% 39% MPlayer interrupted by signal 2 in module: play_audio MPlayer interrupted by signal 2 in module: enable_cache A: 3.5 (03.4) of -0.0 (unknown) 0.4% 41% Exiting... (Quit)Nur wenn ich jetzt eine Ansage über Sayit sende bekomme ich das im log:
sayit.1 2017-01-13 08:59:01.834 error Can't find a suitable libao driver. (Is device in use?) sayit.1 2017-01-13 08:59:01.834 error ALSA lib pcm_dmix.c:1018:(snd_pcm_dmix_open) unable to open slave sayit.1 2017-01-13 08:59:01.834 error MPEG 2.0 layer III, 48 kbit/s, 22050 Hz mono sayit.1 2017-01-13 08:59:01.834 error Playing MPEG stream from de8cdbb0e6d502283b39a8e31a75dfc4.mp3 ... sayit.1 2017-01-13 08:59:01.834 error Directory: /opt/iobroker/cache sayit.1 2017-01-13 08:59:01.834 error tcgetattr(): Inappropriate ioctl for device sayit.1 2017-01-13 08:59:01.834 error THIS SOFTWARE COMES WITH ABSOLUTELY NO WARRANTY! USE AT YOUR OWN RISK! sayit.1 2017-01-13 08:59:01.834 error Uses code from various people. See 'README' for more! sayit.1 2017-01-13 08:59:01.834 error now maintained by Nanakos Chrysostomos and others. sayit.1 2017-01-13 08:59:01.834 error Version 0.3.2-1 (2012/03/25). Written and copyrights by Joe Drew, sayit.1 2017-01-13 08:59:01.834 error High Performance MPEG 1.0/2.0/2.5 Audio Player for Layer 1, 2, and 3. sayit.1 2017-01-13 08:59:01.834 error Cannot play:Error: Command failed: /bin/sh -c mpg321 /opt/iobroker/cache/de8cdbb0e6d502283b39a8e31a75dfc4.mp3 sayit.1 2017-01-13 08:59:01.820 info saying: Amtliche WARNUNG vor LEICHTEM SCHNEEFALL: Von 07.01.2017 06:00 bis 07.01.2017 14:00: Es tritt im Warnzeitraum leichter Schneefall mit Mengen zwischen 1 cm und 3 cm auf. Verbreitet wird es glaSayit Adapter config:
Hat da jemand eventuell eine Idee wo bzw. was da noch fehlt?
Danke und Gruß
-
Hi,
mir ist es nicht gelungen die Ansage über Bluetooth zu schaffen. Ich konnte zwar online streams abspielen aber Ansage über Sayit ging nicht.
Bei dem Testen ist mir aber auch aufgefallen das die Distanz zwischen meinem Bluetooth Sender und Empfänger zu groß ist… also nix mit Bluetooth.
Dann gestern Top Aktuelle HW vom Speicher "Igel Thin Client 3/4" geholt. Hab ich halt noch da rum liegen.
http://ipc.pebkac.at/wiki/index.php/Hardware/Igel/3210
Neues Linux und MPD Server installiert und Lautsprecher angeschlossen.... keine Ansage zu hören
Für mich sieht es in den Logs so aus als wenn zumindest zum MPD Server alles richtig übertragen wird:
IoBroker log:
Zeit Nachricht x nut.0 2017-01-14 11:31:26.915 info nut.0 All Nut values set nut.0 2017-01-14 11:31:26.891 info nut.0 Start NUT update openmediavault 2017-01-14 11:30:03.646 info host.openmediavault instance system.adapter.weatherunderground.0 terminated with code 0 (OK) weatherunderground.0 2017-01-14 11:30:00.656 info weatherunderground.0 starting. Version 1.0.2 in /opt/iobroker/node_modules/iobroker.weatherunderground, node: v4.7.2 openmediavault 2017-01-14 11:30:00.308 info host.openmediavault instance system.adapter.weatherunderground.0 started with pid 6749 harmony.0 2017-01-14 11:29:17.307 info harmony.0 connected to Wohnzimmer harmony.0 2017-01-14 11:29:14.444 info harmony.0 connecting to Wohnzimmer harmony.0 2017-01-14 11:29:14.444 info harmony.0 discovered Wohnzimmer harmony.0 2017-01-14 11:28:42.555 info harmony.0 keep alive cannot get current Activity: Error: Timed out after 5000 ms harmony.0 2017-01-14 11:28:41.800 warn harmony.0 client ended harmony.0 2017-01-14 11:28:41.800 warn harmony.0 lost Wohnzimmer nut.0 2017-01-14 11:26:26.911 info nut.0 All Nut values set nut.0 2017-01-14 11:26:26.887 info nut.0 Start NUT update mpd.0 2017-01-14 11:25:33.713 debug mpd.0 LoadPlaylist... mpd.0 2017-01-14 11:25:33.713 info mpd.0 client.sendCommand {"load": "temp_ForSayIt"} OK! - "" mpd.0 2017-01-14 11:25:33.713 debug mpd.0 update system - "playlist" mpd.0 2017-01-14 11:25:33.713 debug mpd.0 CleraPlaylist... mpd.0 2017-01-14 11:25:33.713 info mpd.0 client.sendCommand {"clear": ""} OK! - "" mpd.0 2017-01-14 11:25:33.710 debug mpd.0 CleraPlaylist... mpd.0 2017-01-14 11:25:33.710 info mpd.0 client.sendCommand {"consume ": "0"} OK! - "" mpd.0 2017-01-14 11:25:33.708 debug mpd.0 sayTimePlay... inMem 2017-01-14 11:25:03.654 debug message mpd.0.* mpd.0.playlist_list val=[], ack=true, ts=1484389503646, q=0, from=system.adapter.mpd.0, lc=1484389503646 inMem 2017-01-14 11:25:03.653 debug message mpd.0.* mpd.0.playlist val=42, ack=true, ts=1484389503644, q=0, from=system.adapter.mpd.0, lc=1484389503644 inMem 2017-01-14 11:25:03.648 debug message mpd.0.* mpd.0.consume val=0, ack=true, ts=1484389503640, q=0, from=system.adapter.mpd.0, lc=1484389503640 mpd.0 2017-01-14 11:25:03.638 debug LoadPlaylist... mpd.0 2017-01-14 11:25:03.638 info client.sendCommand {"load": "temp_ForSayIt"} OK! - "" mpd.0 2017-01-14 11:25:03.634 debug update system - "player" mpd.0 2017-01-14 11:25:03.634 debug update system - "playlist" mpd.0 2017-01-14 11:25:03.633 debug CleraPlaylist... mpd.0 2017-01-14 11:25:03.633 info client.sendCommand {"clear": ""} OK! - "" mpd.0 2017-01-14 11:25:03.632 debug update system - "options" mpd.0 2017-01-14 11:25:03.632 debug CleraPlaylist... mpd.0 2017-01-14 11:25:03.631 info client.sendCommand {"consume ": "0"} OK! - "" mpd.0 2017-01-14 11:25:03.630 debug sayTimePlay... inMem 2017-01-14 11:25:03.621 debug message mpd.0.* mpd.0.playlist_list val=[{"artist":"","album":"","bitrate":0,"title":"","file":"http://192.168.178.18:8082/state/sayit.1.tts.mp3","genre":"","year":0,"len":"00:00","rating":"","cover inMem 2017-01-14 11:25:03.612 debug message mpd.0.* mpd.0.playlist val=40, ack=true, ts=1484389503606, q=0, from=system.adapter.mpd.0, lc=1484389503606 mpd.0 2017-01-14 11:25:03.607 info client.sendCommand {"playid": "13"} OK! - "" mpd.0 2017-01-14 11:25:03.607 debug update system - "playlist" mpd.0 2017-01-14 11:25:03.606 debug SayIt addid...Id: 13 mpd.0 2017-01-14 11:25:03.606 info client.sendCommand {"addid": "http://192.168.178.18:8082/state/sayit.1.tts.mp3"} OK! - "Id: 13\n" mpd.0 2017-01-14 11:25:03.605 debug CleraPlaylist... mpd.0 2017-01-14 11:25:03.605 info client.sendCommand {"consume ": "1"} OK! - "" mpd.0 2017-01-14 11:25:03.604 debug update system - "playlist" mpd.0 2017-01-14 11:25:03.603 debug CleraPlaylist... mpd.0 2017-01-14 11:25:03.603 info client.sendCommand {"clear": ""} OK! - "" mpd.0 2017-01-14 11:25:03.602 debug update system - "stored_playlist" mpd.0 2017-01-14 11:25:03.602 debug SavePlaylist... mpd.0 2017-01-14 11:25:03.601 info client.sendCommand {"save": "temp_ForSayIt"} OK! - "" mpd.0 2017-01-14 11:25:03.601 debug update system - "stored_playlist" mpd.0 2017-01-14 11:25:03.599 debug DelPlaylist... mpd.0 2017-01-14 11:25:03.598 info client.sendCommand {"rm": "temp_ForSayIt"} OK! - "" mpd.0 2017-01-14 11:25:03.597 debug Added sayit to queue... inMem 2017-01-14 11:25:03.596 debug message mpd.0.* mpd.0.playtime val=9, ack=true, ts=1484389503582, q=0, from=system.adapter.mpd.0, lc=1484389503582 inMem 2017-01-14 11:25:03.596 debug message mpd.0.* mpd.0.uptime val=50942, ack=true, ts=1484389503581, q=0, from=system.adapter.mpd.0, lc=1484389503581 inMem 2017-01-14 11:25:03.595 debug message mpd.0.* mpd.0.id val=, ack=true, ts=1484389503581, q=0, from=system.adapter.mpd.0, lc=1484389503581 inMem 2017-01-14 11:25:03.595 debug message mpd.0.* mpd.0.state val=stop, ack=true, ts=1484389503580, q=0, from=system.adapter.mpd.0, lc=1484389503580 inMem 2017-01-14 11:25:03.591 debug message mpd.0.* mpd.0.playlistlength val=0, ack=true, ts=1484389503580, q=0, from=system.adapter.mpd.0, lc=1484389503580 inMem 2017-01-14 11:25:03.580 debug message mpd.0.* mpd.0.playlist val=39, ack=true, ts=1484389503575, q=0, from=system.adapter.mpd.0, lc=1484389503575 inMem 2017-01-14 11:25:03.574 debug message mpd.0.* mpd.0.playlist_list val=[], ack=true, ts=1484389503569, q=0, from=system.adapter.mpd.0, lc=1484389503569 mpd.0 2017-01-14 11:25:03.528 debug sayTimePlay... mpd.0 2017-01-14 11:25:03.528 debug update system - "player" mpd.0 2017-01-14 11:25:03.528 debug update system - "playlist" mpd.0 2017-01-14 11:25:03.428 debug sayTimePlay... mpd.0 2017-01-14 11:25:03.327 debug sayTimePlay... mpd.0 2017-01-14 11:25:03.225 debug sayTimePlay... mpd.0 2017-01-14 11:25:03.125 debug sayTimePlay... mpd.0 2017-01-14 11:25:03.023 debug sayTimePlay... mpd.0 2017-01-14 11:25:02.923 debug sayTimePlay... mpd.0 2017-01-14 11:25:02.821 debug sayTimePlay... inMem 2017-01-14 11:25:02.800 debug message mpd.0.* mpd.0.seek val=50.00, ack=true, ts=1484389502796, q=0, from=system.adapter.mpd.0, lc=1484389502796 inMem 2017-01-14 11:25:02.799 debug message mpd.0.* mpd.0.current_elapsed val=00:01, ack=true, ts=1484389502795, q=0, from=system.adapter.mpd.0, lc=1484389502795 inMem 2017-01-14 11:25:02.799 debug message mpd.0.* mpd.0.bitrate val=256, ack=true, ts=1484389502795, q=0, from=system.adapter.mpd.0, lc=1484389502795 inMem 2017-01-14 11:25:02.795 debug message mpd.0.* mpd.0.elapsed val=1.381, ack=true, ts=1484389502794, q=0, from=system.adapter.mpd.0, lc=1484389502794 inMem 2017-01-14 11:25:02.793 debug message mpd.0.* mpd.0.time val=1:2, ack=true, ts=1484389502792, q=0, from=system.adapter.mpd.0, lc=1484389502792 mpd.0 2017-01-14 11:25:02.721 debug sayTimePlay... mpd.0 2017-01-14 11:25:02.620 debug sayTimePlay... mpd.0 2017-01-14 11:25:02.595 debug stateChange mpd.0.say {"val":"70;http://192.168.178.18:8082/state/sayit.1.tts.mp3","ack":false,"ts":1484389502592,"q":0,"from":"system.adapter.sayit.1","lc":1484339245228} inMem 2017-01-14 11:25:02.594 debug message mpd.0.* mpd.0.say val=70;http://192.168.178.18:8082/state/sayit.1.tts.mp3, ack=false, ts=1484389502592, q=0, from=system.adapter.sayit.1, lc=1484339245228 sayit.1 2017-01-14 11:25:02.588 info Set "mpd.0.say: 70;http://192.168.178.18:8082/state/sayit.1.tts.mp3 sayit.1 2017-01-14 11:25:02.588 info saying: Hallo mpd.0 2017-01-14 11:25:02.520 debug sayTimePlay... mpd.0 2017-01-14 11:25:02.419 debug sayTimePlay... mpd.0 2017-01-14 11:25:02.319 debug sayTimePlay... mpd.0 2017-01-14 11:25:02.217 debug sayTimePlay... mpd.0 2017-01-14 11:25:02.115 debug sayTimePlay... mpd.0 2017-01-14 11:25:02.015 debug sayTimePlay... mpd.0 2017-01-14 11:25:01.915 debug sayTimePlay... mpd.0 2017-01-14 11:25:01.854 debug update system - "mixer" mpd.0 2017-01-14 11:25:01.815 info client.sendCommand {"setvol": "70"} OK! - "" inMem 2017-01-14 11:25:01.803 debug message mpd.0.* mpd.0.id val=12, ack=true, ts=1484389501800, q=0, from=system.adapter.mpd.0, lc=1484389501800 inMem 2017-01-14 11:25:01.802 debug message mpd.0.* mpd.0.current_duration val=00:02, ack=true, ts=1484389501795, q=0, from=system.adapter.mpd.0, lc=1484389501795 inMem 2017-01-14 11:25:01.801 debug message mpd.0.* mpd.0.current_duration_s val=2, ack=true, ts=1484389501794, q=0, from=system.adapter.mpd.0, lc=1484389501794 inMem 2017-01-14 11:25:01.801 debug message mpd.0.* mpd.0.audio val=44100:24:2, ack=true, ts=1484389501794, q=0, from=system.adapter.mpd.0, lc=1484389501794 inMem 2017-01-14 11:25:01.801 debug message mpd.0.* mpd.0.bitrate val=160, ack=true, ts=1484389501794, q=0, from=system.adapter.mpd.0, lc=1484389501794 inMem 2017-01-14 11:25:01.800 debug message mpd.0.* mpd.0.elapsed val=0.359, ack=true, ts=1484389501794, q=0, from=system.adapter.mpd.0, lc=1484389501794 inMem 2017-01-14 11:25:01.800 debug message mpd.0.* mpd.0.time val=0:2, ack=true, ts=1484389501794, q=0, from=system.adapter.mpd.0, lc=1484389501794 inMem 2017-01-14 11:25:01.800 debug message mpd.0.* mpd.0.playtime val=8, ack=true, ts=1484389501794, q=0, from=system.adapter.mpd.0, lc=1484389501794 inMem 2017-01-14 11:25:01.800 debug message mpd.0.* mpd.0.songid val=12, ack=true, ts=1484389501793, q=0, from=system.adapter.mpd.0, lc=1484389501793 inMem 2017-01-14 11:25:01.795 debug message mpd.0.* mpd.0.state val=play, ack=true, ts=1484389501792, q=0, from=system.adapter.mpd.0, lc=1484389501792 inMem 2017-01-14 11:25:01.795 debug message mpd.0.* mpd.0.playlist val=38, ack=true, ts=1484389501790, q=0, from=system.adapter.mpd.0, lc=1484389501790 mpd.0 2017-01-14 11:25:01.789 debug update system - "player" mpd.0 2017-01-14 11:25:01.789 debug update system - "playlist" mpd.0 2017-01-14 11:25:01.751 debug update system - "player" inMem 2017-01-14 11:25:01.656 debug message mpd.0.* mpd.0.playlist_list val=[{"artist":"","album":"","bitrate":0,"title":"","file":"http://192.168.178.18:8082/state/sayit.1.tts.mp3","genre":"","year":0,"len":"00:00","rating":"","cover inMem 2017-01-14 11:25:01.629 debug message mpd.0.* mpd.0.playlistlength val=1, ack=true, ts=1484389501621, q=0, from=system.adapter.mpd.0, lc=1484389501621 inMem 2017-01-14 11:25:01.629 debug message mpd.0.* mpd.0.playlist val=37, ack=true, ts=1484389501620, q=0, from=system.adapter.mpd.0, lc=1484389501620 inMem 2017-01-14 11:25:01.629 debug message mpd.0.* mpd.0.consume val=1, ack=true, ts=1484389501619, q=0, from=system.adapter.mpd.0, lc=1484389501619 inMem 2017-01-14 11:25:01.628 debug message mpd.0.* mpd.0.playlist val=36, ack=true, ts=1484389501616, q=0, from=system.adapter.mpd.0, lc=1484389501616 inMem 2017-01-14 11:25:01.628 debug message mpd.0.* mpd.0.uptime val=50940, ack=true, ts=1484389501615, q=0, from=system.adapter.mpd.0, lc=1484389501615 inMem 2017-01-14 11:25:01.616 debug message mpd.0.* mpd.0.playlist val=35, ack=true, ts=1484389501613, q=0, from=system.adapter.mpd.0, lc=1484389501613 mpd.0 2017-01-14 11:25:01.615 info client.sendCommand {"playid": "12"} OK! - "" mpd.0 2017-01-14 11:25:01.613 debug update system - "playlist" mpd.0 2017-01-14 11:25:01.612 debug SayIt addid...Id: 12 mpd.0 2017-01-14 11:25:01.612 info client.sendCommand {"addid": "http://192.168.178.18:8082/state/sayit.1.tts.mp3"} OK! - "Id: 12\n" mpd.0 2017-01-14 11:25:01.612 debug update system - "options" mpd.0 2017-01-14 11:25:01.612 debug CleraPlaylist... mpd.0 2017-01-14 11:25:01.612 info client.sendCommand {"consume ": "1"} OK! - "" mpd.0 2017-01-14 11:25:01.611 debug update system - "playlist" mpd.0 2017-01-14 11:25:01.611 debug CleraPlaylist... mpd.0 2017-01-14 11:25:01.611 info client.sendCommand {"clear": ""} OK! - "" mpd.0 2017-01-14 11:25:01.609 debug update system - "stored_playlist" mpd.0 2017-01-14 11:25:01.609 debug SavePlaylist... mpd.0 2017-01-14 11:25:01.609 info client.sendCommand {"save": "temp_ForSayIt"} OK! - "" mpd.0 2017-01-14 11:25:01.608 debug update system - "stored_playlist" mpd.0 2017-01-14 11:25:01.608 debug DelPlaylist... mpd.0 2017-01-14 11:25:01.608 info client.sendCommand {"rm": "temp_ForSayIt"} OK! - "" mpd.0 2017-01-14 11:25:01.606 debug stateChange mpd.0.say {"val":"70;http://192.168.178.18:8082/state/sayit.1.tts.mp3","ack":false,"ts":1484389501598,"q":0,"from":"system.adapter.sayit.1","lc":1484339245228} inMem 2017-01-14 11:25:01.601 debug message mpd.0.* mpd.0.say val=70;http://192.168.178.18:8082/state/sayit.1.tts.mp3, ack=false, ts=1484389501598, q=0, from=system.adapter.sayit.1, lc=1484339245228 sayit.1 2017-01-14 11:25:01.586 info Set "mpd.0.say: 70;http://192.168.178.18:8082/state/sayit.1.tts.mp3 sayit.1 2017-01-14 11:25:01.584 info saying: /opt/iobroker/node_modules/iobroker.sayit/gong.mp3MPD Server LOG:
Jan 14 11:25 : player: played "http://192.168.178.18:8082/state/sayit.1.tts.mp3" Jan 14 11:25 : player: played "http://192.168.178.18:8082/state/sayit.1.tts.mp3"Ich denke es liegt irgendwie an der MPD Server conf, komme da aber nicht weiter.
Der Igel hat laut Datenblatt diese Ausstattung:
CPU VIA Eden C6 (600MHz) Chipset Northbridge CN700 Chipset Southbridge RAM SO-DIMM (200-pin) DDR2 (max. 1GB) Flash Memory 128MB (Compact-Flash card) Display Port VGA D-Sub + DVI-I with 16MB (VGA 1920 x 1440 24-bit colour, DVI 1600 x 1200 24-bit colour) Audio AC97 kompatible 3,5 mm Stereo-jacks Network onboard 10/100Base-T Fast Ethernet Serial Port (COM) 1x RS-232C Ports Parallel Port (LPT) DB-25, bidirectional USB 3x USB2.0 Ports (1x front / 2x rear) PS/2 Keyboard + Mouse Storage 1x IDE-port (2,5" , 44-pin) + onboard CompactFlash Card Reader PCI slot 1x Power internal 12V 4A Power Supply. Running: ~19W. Standby: ~7W B x H x T 240 x 43 x 225mmAlso eine AC97 kompatible Soundkarte.
Hat jemand zufällig eine Idee was ich in der mpd.conf einstellen muss?
Die sieht bei mir zur Zeit so aus:
! root@debian1:~# cat /etc/mpd.conf
! # An example configuration file for MPD.
! # Read the user manual for documentation: http://www.musicpd.org/doc/user/
! # or /usr/share/doc/mpd/user-manual.html
! # Files and directories #######################################################
! #
! # This setting controls the top directory which MPD will search to discover the
! # available audio files and add them to the daemon's online database. This
! # setting defaults to the XDG directory, otherwise the music directory will be
! # be disabled and audio files will only be accepted over ipc socket (using
! # file:// protocol) or streaming files over an accepted protocol.
! #
! music_directory "/var/lib/mpd/music"
! #
! # This setting sets the MPD internal playlist directory. The purpose of this
! # directory is storage for playlists created by MPD. The server will use
! # playlist files not created by the server but only if they are in the MPD
! # format. This setting defaults to playlist saving being disabled.
! #
! playlist_directory "/var/lib/mpd/playlists"
! #
! # This setting sets the location of the MPD database. This file is used to
! # load the database at server start up and store the database while the
! # server is not up. This setting defaults to disabled which will allow
! # MPD to accept files over ipc socket (using file:// protocol) or streaming
! # files over an accepted protocol.
! #
! db_file "/var/lib/mpd/tag_cache"
! #
! # These settings are the locations for the daemon log files for the daemon.
! # These logs are great for troubleshooting, depending on your log_level
! # settings.
! #
! # The special value "syslog" makes MPD use the local syslog daemon. This
! # setting defaults to logging to syslog, otherwise logging is disabled.
! #
! log_file "/var/log/mpd/mpd.log"
! #
! # This setting sets the location of the file which stores the process ID
! # for use of mpd –kill and some init scripts. This setting is disabled by
! # default and the pid file will not be stored.
! #
! pid_file "/run/mpd/pid"
! #
! # This setting sets the location of the file which contains information about
! # most variables to get MPD back into the same general shape it was in before
! # it was brought down. This setting is disabled by default and the server
! # state will be reset on server start up.
! #
! state_file "/var/lib/mpd/state"
! #
! # The location of the sticker database. This is a database which
! # manages dynamic information attached to songs.
! #
! sticker_file "/var/lib/mpd/sticker.sql"
! #
! ###############################################################################
! # General music daemon options ################################################
! #
! # This setting specifies the user that MPD will run as. MPD should never run as
! # root and you may use this setting to make MPD change its user ID after
! # initialization. This setting is disabled by default and MPD is run as the
! # current user.
! #
! user "mpd"
! #
! # This setting specifies the group that MPD will run as. If not specified
! # primary group of user specified with "user" setting will be used (if set).
! # This is useful if MPD needs to be a member of group such as "audio" to
! # have permission to use sound card.
! #
! #group "nogroup"
! #
! # This setting sets the address for the daemon to listen on. Careful attention
! # should be paid if this is assigned to anything other then the default, any.
! # This setting can deny access to control of the daemon. Choose any if you want
! # to have mpd listen on every address
! #
! # For network
! bind_to_address "any"
! #
! # And for Unix Socket
! #bind_to_address "/run/mpd/socket"
! #
! # This setting is the TCP port that is desired for the daemon to get assigned
! # to.
! #
! #port "6600"
! #
! # This setting controls the type of information which is logged. Available
! # setting arguments are "default", "secure" or "verbose". The "verbose" setting
! # argument is recommended for troubleshooting, though can quickly stretch
! # available resources on limited hardware storage.
! #
! #log_level "verbose"
! #
! # If you have a problem with your MP3s ending abruptly it is recommended that
! # you set this argument to "no" to attempt to fix the problem. If this solves
! # the problem, it is highly recommended to fix the MP3 files with vbrfix
! # (available as vbrfix in the debian archive), at which
! # point gapless MP3 playback can be enabled.
! #
! #gapless_mp3_playback "yes"
! #
! # Setting "restore_paused" to "yes" puts MPD into pause mode instead
! # of starting playback after startup.
! #
! #restore_paused "no"
! #
! # This setting enables MPD to create playlists in a format usable by other
! # music players.
! #
! #save_absolute_paths_in_playlists "no"
! #
! # This setting defines a list of tag types that will be extracted during the
! # audio file discovery process. The complete list of possible values can be
! # found in the mpd.conf man page.
! #metadata_to_use "artist,album,title,track,name,genre,date,composer,performer,disc"
! #
! # This setting enables automatic update of MPD's database when files in
! # music_directory are changed.
! #
! #auto_update "yes"
! #
! # Limit the depth of the directories being watched, 0 means only watch
! # the music directory itself. There is no limit by default.
! #
! #auto_update_depth "3"
! #
! ###############################################################################
! # Symbolic link behavior ######################################################
! #
! # If this setting is set to "yes", MPD will discover audio files by following
! # symbolic links outside of the configured music_directory.
! #
! #follow_outside_symlinks "yes"
! #
! # If this setting is set to "yes", MPD will discover audio files by following
! # symbolic links inside of the configured music_directory.
! #
! #follow_inside_symlinks "yes"
! #
! ###############################################################################
! # Zeroconf / Avahi Service Discovery ##########################################
! #
! # If this setting is set to "yes", service information will be published with
! # Zeroconf / Avahi.
! #
! #zeroconf_enabled "yes"
! #
! # The argument to this setting will be the Zeroconf / Avahi unique name for
! # this MPD server on the network.
! #
! #zeroconf_name "Music Player"
! #
! ###############################################################################
! # Permissions #################################################################
! #
! # If this setting is set, MPD will require password authorization. The password
! # can setting can be specified multiple times for different password profiles.
! #
! #password "password@read,add,control,admin"
! #
! # This setting specifies the permissions a user has who has not yet logged in.
! #
! #default_permissions "read,add,control,admin"
! #
! ###############################################################################
! # Database #######################################################################
! #
! #database {
! # plugin "proxy"
! # host "other.mpd.host"
! # port "6600"
! #}
! # Input #######################################################################
! #
! input {
! plugin "curl"
! # proxy "proxy.isp.com:8080"
! # proxy_user "user"
! # proxy_password "password"
! }
! #
! ###############################################################################
! # Audio Output ################################################################
! #
! # MPD supports various audio output types, as well as playing through multiple
! # audio outputs at the same time, through multiple audio_output settings
! # blocks. Setting this block is optional, though the server will only attempt
! # autodetection for one sound card.
! #
! # An example of an ALSA output:
! #
! audio_output {
! type "alsa"
! name "My ALSA Device"
! # device "hw:0,0" # optional
! # mixer_type "hardware" # optional
! # mixer_device "default" # optional
! # mixer_control "PCM" # optional
! # mixer_index "0" # optional
! }
! #
! # An example of an OSS output:
! #
! #audio_output {
! # type "oss"
! # name "My OSS Device"
! # device "/dev/dsp" # optional
! # mixer_type "hardware" # optional
! # mixer_device "/dev/mixer" # optional
! # mixer_control "PCM" # optional
! #}
! #
! # An example of a shout output (for streaming to Icecast):
! #
! #audio_output {
! # type "shout"
! # encoding "ogg" # optional
! # name "My Shout Stream"
! # host "localhost"
! # port "8000"
! # mount "/mpd.ogg"
! # password "hackme"
! # quality "5.0"
! # bitrate "128"
! # format "44100:16:1"
! # protocol "icecast2" # optional
! # user "source" # optional
! # description "My Stream Description" # optional
! # url "http://example.com" # optional
! # genre "jazz" # optional
! # public "no" # optional
! # timeout "2" # optional
! # mixer_type "software" # optional
! #}
! #
! # An example of a recorder output:
! #
! #audio_output {
! # type "recorder"
! # name "My recorder"
! # encoder "vorbis" # optional, vorbis or lame
! # path "/var/lib/mpd/recorder/mpd.ogg"
! ## quality "5.0" # do not define if bitrate is defined
! # bitrate "128" # do not define if quality is defined
! # format "44100:16:1"
! #}
! #
! # An example of a httpd output (built-in HTTP streaming server):
! #
! #audio_output {
! # type "httpd"
! # name "My HTTP Stream"
! # encoder "vorbis" # optional, vorbis or lame
! # port "8000"
! # bind_to_address "0.0.0.0" # optional, IPv4 or IPv6
! # quality "5.0" # do not define if bitrate is defined
! # bitrate "128" # do not define if quality is defined
! # format "44100:16:1"
! # max_clients "0" # optional 0=no limit
! #}
! #
! # An example of a pulseaudio output (streaming to a remote pulseaudio server)
! # Please see README.Debian if you want mpd to play through the pulseaudio
! # daemon started as part of your graphical desktop session!
! #
! #audio_output {
! # type "pulse"
! # name "MPD"
! # server "remote_server" # optional
! # sink "remote_server_sink" # optional
! #}
! #
! # An example of a winmm output (Windows multimedia API).
! #
! #audio_output {
! # type "winmm"
! # name "My WinMM output"
! # device "Digital Audio (S/PDIF) (High Definition Audio Device)" # optional
! # or
! # device "0" # optional
! # mixer_type "hardware" # optional
! #}
! #
! # An example of an openal output.
! #
! #audio_output {
! # type "openal"
! # name "My OpenAL output"
! # device "Digital Audio (S/PDIF) (High Definition Audio Device)" # optional
! #}
! #
! ## Example "pipe" output:
! #
! #audio_output {
! # type "pipe"
! # name "my pipe"
! # command "aplay -f cd 2>/dev/null"
! ## Or if you're want to use AudioCompress
! # command "AudioCompress -m | aplay -f cd 2>/dev/null"
! ## Or to send raw PCM stream through PCM:
! # command "nc example.org 8765"
! # format "44100:16:2"
! #}
! #
! ## An example of a null output (for no audio output):
! #
! #audio_output {
! # type "null"
! # name "My Null Output"
! # mixer_type "none" # optional
! #}
! #
! # If MPD has been compiled with libsamplerate support, this setting specifies
! # the sample rate converter to use. Possible values can be found in the
! # mpd.conf man page or the libsamplerate documentation. By default, this is
! # setting is disabled.
! #
! #samplerate_converter "Fastest Sinc Interpolator"
! #
! ###############################################################################
! # Normalization automatic volume adjustments ##################################
! #
! # This setting specifies the type of ReplayGain to use. This setting can have
! # the argument "off", "album", "track" or "auto". "auto" is a special mode that
! # chooses between "track" and "album" depending on the current state of
! # random playback. If random playback is enabled then "track" mode is used.
! # See <http://www.replaygain.org> for more details about ReplayGain.
! # This setting is off by default.
! #
! #replaygain "album"
! #
! # This setting sets the pre-amp used for files that have ReplayGain tags. By
! # default this setting is disabled.
! #
! #replaygain_preamp "0"
! #
! # This setting sets the pre-amp used for files that do NOT have ReplayGain tags.
! # By default this setting is disabled.
! #
! #replaygain_missing_preamp "0"
! #
! # This setting enables or disables ReplayGain limiting.
! # MPD calculates actual amplification based on the ReplayGain tags
! # and replaygain_preamp / replaygain_missing_preamp setting.
! # If replaygain_limit is enabled MPD will never amplify audio signal
! # above its original level. If replaygain_limit is disabled such amplification
! # might occur. By default this setting is enabled.
! #
! #replaygain_limit "yes"
! #
! # This setting enables on-the-fly normalization volume adjustment. This will
! # result in the volume of all playing audio to be adjusted so the output has
! # equal "loudness". This setting is disabled by default.
! #
! #volume_normalization "no"
! #
! ###############################################################################
! # Character Encoding ##########################################################
! #
! # If file or directory names do not display correctly for your locale then you
! # may need to modify this setting.
! #
! filesystem_charset "UTF-8"
! #
! # This setting controls the encoding that ID3v1 tags should be converted from.
! #
! id3v1_encoding "UTF-8"
! #
! ###############################################################################
! # SIDPlay decoder #############################################################
! #
! # songlength_database:
! # Location of your songlengths file, as distributed with the HVSC.
! # The sidplay plugin checks this for matching MD5 fingerprints.
! # See http://www.c64.org/HVSC/DOCUMENTS/Songlengths.faq
! #
! # default_songlength:
! # This is the default playing time in seconds for songs not in the
! # songlength database, or in case you're not using a database.
! # A value of 0 means play indefinitely.
! #
! # filter:
! # Turns the SID filter emulation on or off.
! #
! #decoder {
! # plugin "sidplay"
! # songlength_database "/media/C64Music/DOCUMENTS/Songlengths.txt"
! # default_songlength "120"
! # filter "true"
! #}
! #
! ###############################################################################
! root@debian1:~#Oder fehlt mir noch ein zu installierendes Paket um Audio zu aktivieren?
Habe zusätzlich zum Linux Paket nur noch das installiert:
apt-get install alsa-utils -yapt-get install mpd -yDanke und Gruß
-
In der sayit readme steht das mpg321 installiert sein muss.
Gesendet von meinem m8 mit Tapatalk
-
@Jey Cee:In der sayit readme steht das mpg321 installiert sein muss.
Gesendet von meinem m8 mit Tapatalk `
Danke… wie peinlich... hatte die Seite auch die ganze Zeit auf
Jetzt höre ich zumindest die System eigenen Töne z.B. beim reboot über den Lautsprecher.
Aber immer noch nicht die SayIt Ansage.
Wie könnte ich das denn mal ohne Sayit testen?
-
Versuch mal mit mpg321 eine mp3 wiederzugeben.
Gesendet von meinem m8 mit Tapatalk
-
OK.
Kommt nichts aus dem LS.
Liegt wohl irgendwie am Thin Client.
maya2810@debian:~/MP3$ mpg321 test.mp3 High Performance MPEG 1.0/2.0/2.5 Audio Player for Layer 1, 2, and 3. Version 0.3.2-1 (2012/03/25). Written and copyrights by Joe Drew, now maintained by Nanakos Chrysostomos and others. Uses code from various people. See 'README' for more! THIS SOFTWARE COMES WITH ABSOLUTELY NO WARRANTY! USE AT YOUR OWN RISK! Title : Das schlechte Gewissen Artist : Annett Louisan Album : Teilzeithippie 'Ltd.Edition' ( Year : 2008 Comment : Genre : Pop Playing MPEG stream from test.mp3 ... MPEG 1.0 layer III, 128 kbit/s, 44100 Hz joint-stereo -
Es läuft.
Im Alsa Mixer war es noch Muted.
-
Ich hab jetzt 2 shields von HifiBerry erfolgreich getestet.
Jeweils an den Deckenlautsprechern Visaton Dl-10 klappt das mit MPD nun prima mit dem sayit-Adapter.
Den amp+
und auch den ampmini
Für mich die perfekte Kombi.
-
Ich hab jetzt 2 shields von HifiBerry erfolgreich getestet.
Jeweils an den Deckenlautsprechern Visaton Dl-10 klappt das mit MPD nun prima mit dem sayit-Adapter.
filename="pri-x225.jpg" index="0">~~Den amp+
filename="RPI-HB-AMP_PLUS_03.jpg" index="2">~~und auch den ampmini
filename="RPI_HB_MINI_AMP_01.jpg" index="1">~~Für mich die perfekte Kombi. `
Danke für die Info.
Kannst du mir vielleicht verraten nach welcher der zahlreichen Anleitungen du MPD auf dem PI installiert hast?
Ich habe das Problem das der MPD Deamon auf dem Pi 3 immer wieder stoppt nachdem er jetzt ca.14 Tage problemlos lief.
Gesendet von iPhone mit Tapatalk Pro
-
also ich habe in noch nicht 14 Tage am Stück laufen, bisher läuft der Dienst aber stabil.
Eine Anleitung habe ich nicht wirklich benutzt.
Habe den HifiBerry Installer genutzt um direkt das fertige Raspbian zu erhalten, Netzwerk konfiguriert, alles geupdated und dann mpd installiert:
sudo apt-get install mpd mpc alsa-utilsDann die mpd.conf angepasst, Auswahl der Soundkarte und Anpassung der Lautstärke im Alsamixer und anschließend mpd als service gestartet, fertig. Damit sollte mpd schon laufen.
alsamixerservice mpd start ````(/usr/bin/mpd –no-daemon) Für tts ist dann noch die Angabe des formats entscheidend weil die hifiberry karten die geringen samplerates nicht wiedergeben können. mit der Angabe vom Ausgabeformat in der mpd.conf wird von mpd alles gnadenlos resampled:format "44100:16:2"
VG easyhoo
