Probleme mit Serialport bei zwave2

Thomas Braun

Die Anleitung wird so ohnehin nicht funktionieren, da fehlt noch Zeug davor.

Esmax666

@thomas-braun was meinst was feht

Sonst fur die zwave0 version gab das:

Raspberry Pi3 only: Activate GPIO UART
On Raspberry Pi 3, the UART is by default occupied by the bluetooth module. To activate it for use with a GPIO module, follow these steps:

sudo nano /boot/cmdline.txt

remove console=serial0,115200
save the file and close it
sudo nano /boot/config.txt
Look for each of the following lines. If they are commented out with a #, remove that. If they don't exist, add them to the end of the file:

dtoverlay=pi3-miniuart-bt
enable_uart=1
force_turbo=1
reboot

Aber das brauchen wir nicht mehr oder ? Hab nicht gesehen fur zwave2

Thomas Braun

@esmax666 Ich kenn den Adapter nicht. Mal in die readme geschaut? Da steht vielleicht was drin.

AlCalzone

@esmax666 Probier mal /dev/serial0, da bin ich beim Raspberry Pi 4 auch schon drüber gestolpert.

Ansonsten: ist das wirklich ein Z-Stick Gen5 oder doch ein Z-Stick Gen5 + ? Ich hab grob im Hinterkopf dass ersterer Probleme mit neueren USB-Schnittstellen macht.

Esmax666

@thomas-braun

Hab gerade geprüft auf raspi3 hatte ich eher /dev/ttyACM0

Esmax666

@alcalzone Z-Stick Gen5 + mit raspu hat das funktioniert mit acm0

Esmax666

@alcalzone

zwave2.0	2021-05-16 00:24:27.762	error	(23524) The Z-Wave driver could not be started: Error: No such file or directory, cannot open /dev/serial0
zwave2.0	2021-05-16 00:24:27.604	info	(23524) starting. Version 1.9.3 in /opt/iobroker/node_modules/iobroker.zwave2, node: v12.22.1, js-controller: 3.2.16
host.raspberrypi	2021-05-16 00:24:25.121	info	instance system.adapter.zwave2.0 started with pid 23524
host.raspberrypi	2021-05-16 00:24:22.595	info	instance system.adapter.zwave2.0 terminated with code 11 (ADAPTER_REQUESTED_TERMINATION)
zwave2.0	2021-05-16 00:24:21.999	info	(13067) Terminated (ADAPTER_REQUESTED_TERMINATION): Without reason
zwave2.0	2021-05-16 00:24:21.998	info	(13067) terminating
zwave2.0	2021-05-16 00:24:21.996	info	(13067) Shutting down driver...
host.raspberrypi	2021-05-16 00:24:21.997	info	stopInstance system.adapter.zwave2.0 send kill signal
zwave2.0	2021-05-16 00:24:21.994	info	(13067) Got terminate signal TERMINATE_YOURSELF
host.raspberrypi	2021-05-16 00:24:21.989	info	stopInstance system.adapter.zwave2.0 (force=false, process=true)
zwave2.0	2021-05-16 00:21:58.507	error	(13067) The Z-Wave driver could not be started: Error: No such file or directory, cannot open /dev/ttyACM0
zwave2.0	2021-05-16 00:21:58.367	info	(13067) starting. Version 1.9.3 in /opt/iobroker/node_modules/iobroker.zwave2, node: v12.22.1, js-controller: 3.2.16
host.raspberrypi	2021-05-16 00:21:56.051	info	instance system.adapter.zwave2.0 started with pid 13067
host.raspberrypi	2021-05-16 00:21:53.467	info	instance system.adapter.zwave2.0 terminated with code 11 (ADAPTER_REQUESTED_TERMINATION)
host.raspberrypi	2021-05-16 00:21:52.921	info	stopInstance system.adapter.zwave2.0 send kill signal
zwave2.0	2021-05-16 00:21:52.882	info	(12357) Terminated (ADAPTER_REQUESTED_TERMINATION): Without reason
zwave2.0	2021-05-16 00:21:52.880	info	(12357) terminating
zwave2.0	2021-05-16 00:21:52.879	info	(12357) Shutting down driver...
zwave2.0	2021-05-16 00:21:52.877	info	(12357) Got terminate signal TERMINATE_YOURSELF
host.raspberrypi	2021-05-16 00:21:52.859	info	stopInstance system.adapter.zwave2.0 (force=false, process=true)
zwave2.0	2021-05-16 00:21:49.469	error	(12357) The Z-Wave driver could not be started: Error: No such file or directory, c

Esmax666

@alcalzone

Soll ich das machen

https://forum.iobroker.net/post/629693

Esmax666

@alcalzone

Jetzt

zwave2.0	2021-05-16 07:55:56.747	error	(12308) The Z-Wave driver could not be started: Error: Is a directory, cannot open /dev/
zwave2.0	2021-05-16 07:55:56.584	info	(12308) starting. Version 1.9.3 in /opt/iobroker/node_modules/iobroker.zwave2, node: v12.22.1, js-controller: 3.2.16
host.raspberrypi	2021-05-16 07:55:54.148	info	instance system.adapter.zwave2.0 started with pid 12308
host.raspberrypi	2021-05-16 07:55:51.659	info	instance system.adapter.zwave2.0 terminated with code 11 (ADAPTER_REQUESTED_TERMINATION)
zwave2.0	2021-05-16 07:55:51.028	info	(6004) Terminated (ADAPTER_REQUESTED_TERMINATION): Without reason
zwave2.0	2021-05-16 07:55:51.026	info	(6004) terminating
zwave2.0	2021-05-16 07:55:51.025	info	(6004) Shutting down driver...
zwave2.0	2021-05-16 07:55:51.023	info	(6004) Got terminate signal TERMINATE_YOURSELF
host.raspberrypi	2021-05-16 07:55:51.022	info	stopInstance system.adapter.zwave2.0 send kill signal
host.raspberrypi	2021-05-16 07:55:51.014	info	stopInstance system.adapter.zwave2.0 (force=false, process=true)
zwave2.0	2021-05-16 07:54:38.393	info	(6004) starting. Version 1.9.3 in /opt/iobroker/node_modules/iobroker.zwave2, node: v12.22.1, js-controller: 3.2.16
host.raspberrypi	2021-05-16 07:54:35.967	info	instance system.adapter.zwave2.0 started with pid 6004
host.raspberrypi	2021-05-16 07:54:33.559	info	instance system.adapter.zwave2.0 terminated with code 11 (ADAPTER_REQUESTED_TERMINATION)
zwave2.0	2021-05-16 07:54:32.824	info	(21886) Terminated (ADAPTER_REQUESTED_TERMINATION): Without reason
zwave2.0	2021-05-16 07:54:32.822	info	(21886) terminating
zwave2.0	2021-05-16 07:54:32.820	info	(21886) Shutting down driver...
zwave2.0	2021-05-16 07:54:32.812	info	(21886) Got terminate signal TERMINATE_YOURSELF
host.raspberrypi	2021-05-16 07:54:32.796	info	stopInstance system.adapter.zwave2.0 send kill signal
host.raspberrypi	2021-05-16 07:54:32.776	info	stopInstance system.adapter.zwave2.0 (force=false, process=true)
info.0	2021-05-16 07:49:56.003	warn	(2765) State "info.0.uuid" has no existing object, this might lead to an error in future versions
zwave2.0	2021-05-16 07:44:28.868	info	(21886) starting. Version 1.9.3 in /opt/iobroker/node_modules/iobroker.zwave2, node: v12.22.1, js-controller: 3.2.16
host.raspberrypi	2021-05-16 07:44:26.457	info	instance system.adapter.zwave2.0 started with pid 21886
host.raspberrypi	2021-05-16 07:44:24.074	info	instance system.adapter.zwave2.0 terminated with code 11 (ADAPTER_REQUESTED_TERMINATION)
zwave2.0	2021-05-16 07:44:23.304	info	(4553) Terminated (ADAPTER_REQUESTED_TERMINATION): Without reason
zwave2.0	2021-05-16 07:44:23.303	info	(4553) terminating
zwave2.0	2021-05-16 07:44:23.301	info	(4553) Shutting down driver...
zwave2.0	2021-05-16 07:44:23.294	info	(4553) Got terminate signal TERMINATE_YOURSELF
host.raspberrypi	2021-05-16 07:44:23.292	info	stopInstance system.adapter.zwave2.0 send kill signal

Version

Esmax666

@thomas-braun said in Test Adapter Z-Wave 2 v1.10.x:

Windows User, oder? Der Treiber ist im Linux-Kernel schon drin.

warum windows User ?
steht sogar in log

host.raspberrypi	2021-05-16 08:00:00.072	info	instance system.adapter.ical.0 started with pid 29746
zwave2.0	2021-05-16 07:55:56.747	error	(12308) The Z-Wave driver could not be started: Error: Is a directory, cannot open /dev/
zwave2.0	2021-05-16 07:55:56.584	info	(12308) starting. Version 1.9.3 in /opt/iobroker/node_modules/iobroker.zwave2, node: v12.22.1, js-controller: 3.2.16
host.raspberrypi	2021-05-16 07:55:54.148	info	instance system.adapter.zwave2.0 started with pid 12308
host.raspberrypi	2021-05-16 07:55:51.659	info	instance system.adapter.zwave2.0 terminated with code 11 (ADAPTER_REQUESTED_TERMINATION)
zwave2.0	2021-05-16 07:55:51.028	info	(6004) Terminated (ADAPTER_REQUESTED_TERMINATION): Without reason
zwave2.0	2021-05-16 07:55:51.026	info	(6004) terminating

Esmax666

Linux raspberrypi 5.10.17-v7l+ #1414 SMP Fri Apr 30 13:20:47 BST 2021 armv7l

The programs included with the Debian GNU/Linux system are free software;
the exact distribution terms for each program are described in the
individual files in /usr/share/doc/*/copyright.

Debian GNU/Linux comes with ABSOLUTELY NO WARRANTY, to the extent
permitted by applicable law.
Last login: Sun May 16 00:06:39 2021
pi@raspberrypi:~ $ npm i iobroker.zwave2

> @serialport/bindings@9.0.7 install /home/pi/node_modules/@serialport/bindings
> prebuild-install --tag-prefix @serialport/bindings@ || node-gyp rebuild

prebuild-install WARN install No prebuilt binaries found (target=12.22.1 runtime=node arch=arm libc= platform=linux)
make: Verzeichnis „/home/pi/node_modules/@serialport/bindings/build“ wird betreten
  CXX(target) Release/obj.target/bindings/src/serialport.o
../src/serialport.cpp: In function ‘Nan::NAN_METHOD_RETURN_TYPE Open(Nan::NAN_METHOD_ARGS_TYPE)’:
../src/serialport.cpp:78:69: warning: cast between incompatible function types from ‘void (*)(uv_work_t*)’ {aka ‘void (*)(uv_work_s*)’} to ‘uv_after_work_cb’ {aka ‘void (*)(uv_work_s*, int)’} [-Wcast-function-type]
   uv_queue_work(uv_default_loop(), req, EIO_Open, (uv_after_work_cb)EIO_AfterOpen);
                                                                     ^~~~~~~~~~~~~
../src/serialport.cpp: In function ‘Nan::NAN_METHOD_RETURN_TYPE Update(Nan::NAN_METHOD_ARGS_TYPE)’:
../src/serialport.cpp:135:71: warning: cast between incompatible function types from ‘void (*)(uv_work_t*)’ {aka ‘void (*)(uv_work_s*)’} to ‘uv_after_work_cb’ {aka ‘void (*)(uv_work_s*, int)’} [-Wcast-function-type]
   uv_queue_work(uv_default_loop(), req, EIO_Update, (uv_after_work_cb)EIO_AfterUpdate);
                                                                       ^~~~~~~~~~~~~~~
../src/serialport.cpp: In function ‘Nan::NAN_METHOD_RETURN_TYPE Close(Nan::NAN_METHOD_ARGS_TYPE)’:
../src/serialport.cpp:175:70: warning: cast between incompatible function types from ‘void (*)(uv_work_t*)’ {aka ‘void (*)(uv_work_s*)’} to ‘uv_after_work_cb’ {aka ‘void (*)(uv_work_s*, int)’} [-Wcast-function-type]
   uv_queue_work(uv_default_loop(), req, EIO_Close, (uv_after_work_cb)EIO_AfterClose);
                                                                      ^~~~~~~~~~~~~~
../src/serialport.cpp: In function ‘Nan::NAN_METHOD_RETURN_TYPE Flush(Nan::NAN_METHOD_ARGS_TYPE)’:
../src/serialport.cpp:215:70: warning: cast between incompatible function types from ‘void (*)(uv_work_t*)’ {aka ‘void (*)(uv_work_s*)’} to ‘uv_after_work_cb’ {aka ‘void (*)(uv_work_s*, int)’} [-Wcast-function-type]
   uv_queue_work(uv_default_loop(), req, EIO_Flush, (uv_after_work_cb)EIO_AfterFlush);
                                                                      ^~~~~~~~~~~~~~
../src/serialport.cpp: In function ‘Nan::NAN_METHOD_RETURN_TYPE Set(Nan::NAN_METHOD_ARGS_TYPE)’:
../src/serialport.cpp:271:68: warning: cast between incompatible function types from ‘void (*)(uv_work_t*)’ {aka ‘void (*)(uv_work_s*)’} to ‘uv_after_work_cb’ {aka ‘void (*)(uv_work_s*, int)’} [-Wcast-function-type]
   uv_queue_work(uv_default_loop(), req, EIO_Set, (uv_after_work_cb)EIO_AfterSet);
                                                                    ^~~~~~~~~~~~
../src/serialport.cpp: In function ‘Nan::NAN_METHOD_RETURN_TYPE Get(Nan::NAN_METHOD_ARGS_TYPE)’:
../src/serialport.cpp:316:68: warning: cast between incompatible function types from ‘void (*)(uv_work_t*)’ {aka ‘void (*)(uv_work_s*)’} to ‘uv_after_work_cb’ {aka ‘void (*)(uv_work_s*, int)’} [-Wcast-function-type]
   uv_queue_work(uv_default_loop(), req, EIO_Get, (uv_after_work_cb)EIO_AfterGet);
                                                                    ^~~~~~~~~~~~
../src/serialport.cpp: In function ‘Nan::NAN_METHOD_RETURN_TYPE GetBaudRate(Nan::NAN_METHOD_ARGS_TYPE)’:
../src/serialport.cpp:366:76: warning: cast between incompatible function types from ‘void (*)(uv_work_t*)’ {aka ‘void (*)(uv_work_s*)’} to ‘uv_after_work_cb’ {aka ‘void (*)(uv_work_s*, int)’} [-Wcast-function-type]
 _queue_work(uv_default_loop(), req, EIO_GetBaudRate, (uv_after_work_cb)EIO_AfterGetBaudRate);
                                                                        ^~~~~~~~~~~~~~~~~~~~

../src/serialport.cpp: In function ‘Nan::NAN_METHOD_RETURN_TYPE Drain(Nan::NAN_METHOD_ARGS_TYPE)’:
../src/serialport.cpp:412:70: warning: cast between incompatible function types from ‘void (*)(uv_work_t*)’ {aka ‘void (*)(uv_work_s*)’} to ‘uv_after_work_cb’ {aka ‘void (*)(uv_work_s*, int)’} [-Wcast-function-type]
   uv_queue_work(uv_default_loop(), req, EIO_Drain, (uv_after_work_cb)EIO_AfterDrain);
                                                                      ^~~~~~~~~~~~~~
../src/serialport.cpp: At global scope:
../src/serialport.cpp:433:28: warning: unnecessary parentheses in declaration of ‘ToParityEnum’ [-Wparentheses]
 SerialPortParity NAN_INLINE(ToParityEnum(const v8::Local<v8::String>& v8str)) {
                            ^
../src/serialport.cpp:452:30: warning: unnecessary parentheses in declaration of ‘ToStopBitEnum’ [-Wparentheses]
 SerialPortStopBits NAN_INLINE(ToStopBitEnum(double stopBits)) {
                              ^
In file included from ../../../nan/nan.h:56,
                 from ../src/./serialport.h:6,
                 from ../src/serialport.cpp:1:
/home/pi/.cache/node-gyp/12.22.1/include/node/node.h:736:43: warning: cast between incompatible function types from ‘void (*)(Nan::ADDON_REGISTER_FUNCTION_ARGS_TYPE)’ {aka ‘void (*)(v8::Local<v8::Object>)’} to ‘node::addon_register_func’ {aka ‘void (*)(v8::Local<v8::Object>, v8::Local<v8::Value>, void*)’} [-Wcast-function-type]
       (node::addon_register_func) (regfunc),                          \
                                           ^
/home/pi/.cache/node-gyp/12.22.1/include/node/node.h:770:3: note: in expansion of macro ‘NODE_MODULE_X’
   NODE_MODULE_X(modname, regfunc, NULL, 0)  // NOLINT (readability/null_usage)
   ^~~~~~~~~~~~~
../src/serialport.cpp:486:1: note: in expansion of macro ‘NODE_MODULE’
 NODE_MODULE(serialport, init);
 ^~~~~~~~~~~
  CXX(target) Release/obj.target/bindings/src/serialport_unix.o
../src/serialport_unix.cpp: In function ‘int setup(int, OpenBaton*)’:
../src/serialport_unix.cpp:176:60: warning: ‘%s’ directive output may be truncated writing up to 1023 bytes into a region of size 1005 [-Wformat-truncation=]
     snprintf(data->errorString, sizeof(data->errorString), "Error %s Cannot open %s", strerror(errno), data->path);
                                                            ^~~~~~~~~~~~~~~~~~~~~~~~~
../src/serialport_unix.cpp:176:13: note: ‘snprintf’ output 20 or more bytes (assuming 1043) into a destination of size 1024
     snprintf(data->errorString, sizeof(data->errorString), "Error %s Cannot open %s", strerror(errno), data->path);
     ~~~~~~~~^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
../src/serialport_unix.cpp: In function ‘void EIO_Open(uv_work_t*)’:
../src/serialport_unix.cpp:86:60: warning: ‘%s’ directive output may be truncated writing up to 1023 bytes into a region of size 1003 [-Wformat-truncation=]
     snprintf(data->errorString, sizeof(data->errorString), "Error: %s, cannot open %s", strerror(errno), data->path);
                                                            ^~~~~~~~~~~~~~~~~~~~~~~~~~~
../src/serialport_unix.cpp:86:13: note: ‘snprintf’ output 22 or more bytes (assuming 1045) into a destination of size 1024
     snprintf(data->errorString, sizeof(data->errorString), "Error: %s, cannot open %s", strerror(errno), data->path);
     ~~~~~~~~^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
  CXX(target) Release/obj.target/bindings/src/poller.o
  CXX(target) Release/obj.target/bindings/src/serialport_linux.o
  SOLINK_MODULE(target) Release/obj.target/bindings.node
  COPY Release/bindings.node
make: Verzeichnis „/home/pi/node_modules/@serialport/bindings/build“ wird verlassennpm WARN saveError ENOENT: no such file or directory, open '/home/pi/package.json'
npm notice created a lockfile as package-lock.json. You should commit this file.
npm WARN enoent ENOENT: no such file or directory, open '/home/pi/package.json'
npm WARN pi No description
npm WARN pi No repository field.
npm WARN pi No README data
npm WARN pi No license field.

+ iobroker.zwave2@1.10.0
added 168 packages from 189 contributors and audited 168 packages in 41.299s

29 packages are looking for funding
  run `npm fund` for details

found 0 vulnerabilities

pi@raspberrypi:~ $ npm i zwave-js
npm WARN saveError ENOENT: no such file or directory, open '/home/pi/package.json'
npm WARN enoent ENOENT: no such file or directory, open '/home/pi/package.json'
npm WARN pi No description
npm WARN pi No repository field.
npm WARN pi No README data
npm WARN pi No license field.

+ zwave-js@7.4.0
updated 1 package and audited 309 packages in 6.047s

29 packages are looking for funding
  run `npm fund` for details

found 0 vulnerabilities

pi@raspberrypi:~ $

Esmax666

@alcalzone

Das ist die Raspi3 die die funktionniert (npm version vielleicht passt nicht)
(hier ist ACM0) auf raspi4 geht auch nicht fehlt etwas ?

Thomas Braun

@esmax666 sagte in Test Adapter Z-Wave 2 v1.10.x:

steht sogar in log

Da steht, dass /dev kein device node ist sondern ein Verzeichnis. Vermutlich hast du /dev in den Einstellungen des Adapters drin.

pi@raspberrypi:~ $ npm i iobroker.zwave2

Ist falsch. Jetzt hast du das im /home-Verzeichnis von pi installiert.
Nimm den Adapter aus der Adapterliste im Admin.

Aus deinem dmesg:

[Sa Mai 15 21:06:15 2021] fe201000.serial: ttyAMA0 at MMIO 0xfe201000 (irq = 36, base_baud = 0) is a PL011 rev2

Das ist der für das Gerät geladene Treiber. Und da sieht man auch, dass das Device auf ttyAMA0 liegt.

Esmax666

@thomas-braun said in Test Adapter Z-Wave 2 v1.10.x:

Nimm den Adapter aus der Adapterliste im Admin.

Hatte ich schon gemacht.

sogar sogar instance weg gemacht und neu gemacht

leider geht es nicht mehr

Thomas Braun

@esmax666 sagte in Test Adapter Z-Wave 2 v1.10.x:

leider geht es nicht mehr

Stimmt dann wohl.
Leider kann man aus deiner 'Fehlerbeschreibung' nichts herauslesen.

Esmax666

@thomas-braun was kann ich sonst noch als info geben ?

sonst habe ich noch 2 warn und 1 error

info.0	2021-05-16 13:07:15.628	warn	(2791) State "info.0.uuid" has no existing object, this might lead to an error in future versions
host.raspberrypi	2021-05-16 13:00:08.345	info	instance system.adapter.ical.0 terminated with code 0 (NO_ERROR)
host.raspberrypi	2021-05-16 13:00:00.042	info	instance system.adapter.ical.0 started with pid 5361
zwave2.0	2021-05-16 12:59:53.829	info	(5346) starting. Version 1.9.3 in /opt/iobroker/node_modules/iobroker.zwave2, node: v12.22.1, js-controller: 3.2.16
host.raspberrypi	2021-05-16 12:59:51.487	info	instance system.adapter.zwave2.0 started with pid 5346
host.raspberrypi	2021-05-16 12:59:21.429	info	Restart adapter system.adapter.zwave2.0 because enabled
host.raspberrypi	2021-05-16 12:59:21.428	info	instance system.adapter.zwave2.0 terminated with code NaN ()
host.raspberrypi	2021-05-16 12:59:21.427	warn	instance system.adapter.zwave2.0 terminated due to SIGABRT
host.raspberrypi	2021-05-16 12:59:21.422	error	Caught by controller[0]: FATAL ERROR: Ineffective mark-compacts near heap limit Allocation failed - JavaScript heap out of memory
zwave2.0	2021-05-16 12:45:57.264	info	(5176) starting. Version 1.9.3 in /opt/iobroker/node_modules/iobroker.zwave2, node: v12.22.1, js-controller: 3.2.16
host.raspberrypi	2021-05-16 12:45:55.024	info	instance system.adapter.zwave2.0 started with pid 5176
host.raspberrypi	2021-05-16 12:45:24.958	info	Restart adapter system.adapter.zwave2.0 because enabled
host.raspberrypi	2021-05-16 12:45:24.957	info	instance system.adapter.zwave2.0 terminated with code NaN ()
host.raspberrypi	2021-05-16 12:45:24.956	warn	instance system.adapter.zwave2.0 terminated due to SIGABRT
host.raspberrypi	2021-05-16 12:45:24.950	error	Caught by controller[0]: FATAL ERROR: Ineffective mark-compacts near heap limit Allocation failed - JavaScript heap out of memory
info.0	2021-05-16 12:37:15.604	warn	(2791) State "info.0.uuid" has no existing object, this might lead to an error in future versions
zwave2.0	2021-05-16 12:32:01.208	info	(5010) starting. Version 1.9.3 in /opt/iobroker/node_modules/iobroker.zwave2, node: v12.22.1, js-controller: 3.2.16
host.raspberrypi	2021-05-16 12:31:58.911	info	instance system.adapter.zwave2.0 started with pid 5010
host.raspberrypi	2021-05-16 12:31:28.859	info	Restart adapter system.adapter.zwave2.0 because enabled
host.raspberrypi	2021-05-16 12:31:28.859	info	instance system.adapter.zwave2.0 terminated with code NaN ()
host.raspberrypi	2021-05-16 12:31:28.858	warn	instance system.adapter.zwave2.0 terminated due to SIGABRT
host.raspberrypi	2021-05-16 12:31:28.857	error	Caught by controller[0]: FATAL ERROR: Ineffective mark-compacts near heap limit Allocation failed - JavaScript heap out of memory

Thomas Braun

@esmax666
Speicher dicht?

free -ht

anschauen.

Esmax666

@thomas-braun

Thomas Braun

@esmax666
Bitte keine Bilderchen posten, KonsolenTEXT in CodeTags eingebettet hier rein.

AlCalzone

@Esmax666 die Datei brauchst du inzwischen nicht mehr manuell bearbeiten. Auf Pi 4 sind das die Schritte, die ausreichen: Konsole auf,

sudo raspi-config

3 Interface Options
P6 Serial Port
"Would you like a login shell to be accessible over serial?" => NO
"Would you like the serial port hardware to be enabled?" => YES

Danach sollte der Adapter funktionieren, wenn du /dev/serial0 einträgst - ist leider nicht in der Liste zu finden.

NEWS

Probleme mit Serialport bei zwave2

Support us

846
Online

31.7k
Users

79.8k
Topics

1.3m
Posts

NEWS

Probleme mit Serialport bei zwave2

Support us

846Online

31.7kUsers

79.8kTopics

1.3mPosts

846
Online

31.7k
Users

79.8k
Topics

1.3m
Posts