ioBroker verliert immer wieder Verbindung zu Endgerät

[Kallo]

Heute morgen war das System eingefroren und ließ sich auch per ssh nicht mehr ansprechen. Es konnte zwar eine Verbindung aufgebaut werden, aber nach Eingabe eines Befehls ist einfach nichts passiert. Das Problem liegt somit auf Systemebene und wohl eher nicht an iobroker. Mir blieb nichts anderes übrig, als ein harter Reboot (=Stecker ziehen) um 8:17 Uhr. Interessanterweise ist als Uhrzeit 5:17 im Log vermerkt und erst nach einem time sync wird die korrekte Zeit angegeben. Ich hatte das System zwischenzeitlich schonmal komplett neu installiert, aber es gibt wieder/immer noch Probleme. Ich betrachte daher die Hardware als defekt.

Ich bekomme heute wohl eh eine neue SSD und ein neues USB-SSD-Gehäuse. Dann werde ich den Raspi nochmal komplett neu aufsetzen und ein Backup vom iobroker einspielen.

Log im Anhang da "Payload too large"...

syslog_20210527.rtf

[Thomas Braun]

@kallo

May 27 05:17:05 raspberrypi systemd[1]: Starting Show Plymouth Boot Screen...

Weiter brauch ich gar nicht lesen. Mach so'n Tinneff aus. Auf 'nem Server brauchst keinen bootsplash.

May 27 05:17:05 raspberrypi systemd-fsck[284]: fsck.fat 4.1 (2017-01-24)

Nicht gut. FAT ist im Normalfall die boot-Partition.

May 27 05:17:05 raspberrypi systemd-fsck[284]: 0x41: Dirty bit is set. Fs was not properly unmounted and some data may be corrupt.

Nicht gut.

May 27 05:17:05 raspberrypi systemd[1]: Received SIGRTMIN+20 from PID 157 (plymouthd).

Der oben erwähnte unnötige Tinneff schmiert dir hier ab.

May 27 05:17:05 raspberrypi systemd[1]: Started CUPS Scheduler.

Hast du einen Drucker am Raspberry? Ansonsten: Tinneff.

May 27 05:17:05 raspberrypi kernel: [    3.904250] EXT4-fs (sda2): 1 orphan inode deleted

Auch gar nicht gut.

May 27 05:17:05 raspberrypi kernel: [    7.577431] [drm] No displays found. Consider forcing hotplug if HDMI is attached

Gut.

Ganz schlecht:

May 27 05:17:06 raspberrypi systemd[1]: Starting Light Display Manager...

Warum feuerst du da einen Desktop hoch, wenn da eh keine Displays angeschlossen sind? Der überflüssigste Tinneff überhaupt.

Weiter zu lesen habe ich keine Lust mehr.

[Kallo]

Ich habe zwischenzeitlich alles neu aufgesetzt.

• neue SSD, neuer USB-SATA-Adapter
• Raspberry Pi OS nun ohne Desktop
• iobroker nach dieser Anleitung installiert: https://www.iobroker.net/#de/documentation/install/linux.md
• Backup zurückgespielt
• ble-Adapter gelöscht (benutze ich eh nicht) und dabei auch die 39.000 angesammelten Objekte mitentsorgt...
• Adapter alle aktuell (stable)
• Admin 5.0.2 (wenn ich zurückgehe sehe ich unter Instanzen keine Adapter)

System flutscht gut, aber sporadisch tritt immer noch ein kurzzeitiger Verbindungsverlust auf. Ich hatte ein Skript am Laufen, welches eine Lichtszene schaltet, wenn das MacBook nicht mehr im Netzwerk ist. Ergebnis: Im Home Office zwei - dreimal am Tag selbständige Änderung der Szene, obwohl ich nicht aktiv im iobroker gearbeitet habe. Der Fehler scheint grundsätzlich noch dazusein. Ich habe jetzt den Radar-Adapter kurzerhand deaktiviert. Trotzdem ist mir aufgefallen, daß immer mal eines Tablets kurzzeitig den Kontakt verliert.

Zeitweise wird ein Gerät (D1 Mini mit Tasmota zur Ansteuerung von LEDs) mit mqtt-Anfragen bombardiert, das Log des D1 ist geflutet von Befehlen zur Lichtsteuerung und es flackert dementsprechend. Neustart des D1 bringt nichts, Stoppen des Sonoff-Adapaters auch nicht. Hab den Adapter kurzerhand neu installiert, als er deinstalliert war ist die Objektstruktur des Gerätes trotzdem erhalten geblieben und hat geflackert, weil immer neue Werte reingeschrieben wurden. Stoppen lässt sich das nur, wenn ich iobroker komplett neu starte.

Soweit ich das beurteilen kann ist im iobroker log nichts auffälliges zu sehen. Den Werkzeugkasten von @Thomas-Braun habe ich schon durch, alles schick (soweit ich das beurteilen kann).

Insgesamt ist es besser, aber irgendwo ist da immer noch der Wurm drin..

[Thomas Braun]

@kallo sagte in ioBroker verliert immer wieder Verbindung zu Endgerät:

Adapter alle aktuell (stable)
Admin 5.0.2

Das widerspricht sich.

admin
latest:	5.1.6 for 1 days
stable:	4.2.1 for 4 months

[Kallo]

So wirds mir in der Adapter-Liste angezeigt.

Okay, war vielleicht nicht ganz genau ausgedrückt. Alle Adapter sind aktuell (stable), nur den Admin habe ich auf Anraten aus dem latest installiert.
https://forum.iobroker.net/topic/31020/javascript-blockly-wird-oft-nicht-gespeichert/304?_=1622816044506

[Thomas Braun]

@kallo

iobroker repo list 
iobroker update

[Kallo]

@thomas-braun

pi@raspberrypi:/ $ iobroker repo list
Stable (default): http://download.iobroker.net/sources-dist.json
Beta (latest): http://download.iobroker.net/sources-dist-latest.json

Active repo: Stable (default)
pi@raspberrypi:/ $ 

pi@raspberrypi:/ $ iobroker update
Used repository: Stable (default)
hash changed or no sources cached => force download of new sources
update done
Adapter    "admin"         : 4.2.1    , installed 5.0.24
Adapter    "alarm"         : 2.0.1    
Adapter    "alexa2"        : 3.9.0    , installed 3.9.0
Adapter    "alias-manager" : 1.2.1    
Adapter    "alpha2"        : 1.0.0    
Adapter    "amazon-dash"   : 1.1.0    
Adapter    "artnet"        : 1.2.2    
Adapter    "asterisk"      : 1.0.6    
Adapter    "asuswrt"       : 1.0.1    
Adapter    "b-control-em"  : 0.2.1    
Adapter    "backitup"      : 2.1.11   , installed 2.1.11
Adapter    "beckhoff"      : 1.4.0    
Adapter    "benq"          : 0.2.4    
Adapter    "binance"       : 1.1.3    
Adapter    "ble"           : 0.12.0   
Adapter    "bluelink"      : 1.0.4    
Adapter    "bmw"           : 1.3.3    
Adapter    "bosesoundtouch": 0.9.3    
Adapter    "botvac"        : 1.0.0    
Adapter    "bring"         : 1.7.7    , installed 1.7.7
Adapter    "broadlink2"    : 2.0.3    , installed 2.0.3
Adapter    "bsblan"        : 0.2.2    
Adapter    "bshb"          : 0.1.13   
Adapter    "bydbatt"       : 1.0.5    
Adapter    "chromecast"    : 2.3.1    
Adapter    "cloud"         : 4.0.10   
Adapter    "comfoair"      : 1.1.3    
Adapter    "contactid"     : 1.0.2    
Adapter    "coronavirus-statistics": 0.6.3   
Adapter    "countdown"     : 1.2.3    , installed 1.2.3
Adapter    "cul"           : 1.3.5    
Adapter    "daikin"        : 1.3.0    
Adapter    "daswetter"     : 3.0.7    , installed 3.0.7
Adapter    "deconz"        : 1.3.11   , installed 1.3.11
Adapter    "denon"         : 1.10.7   
Adapter    "device-reminder": 1.2.1   
Adapter    "devices"       : 0.3.16   
Adapter    "digitalstrom"  : 2.2.0    
Adapter    "discovergy"    : 0.5.4    
Adapter    "discovery"     : 2.6.1    , installed 2.6.1
Adapter    "divera247"     : 0.1.2    
Adapter    "doorio"        : 2.0.1    
Adapter    "ds18b20"       : 1.4.1    
Adapter    "dwd"           : 2.7.5    
Adapter    "dysonairpurifier": 0.9.1   
Adapter    "easee"         : 1.0.2    
Adapter    "ebus"          : 2.2.5    
Adapter    "echarts"       : 0.4.11   
Adapter    "ecovacs-deebot": 1.1.1    
Adapter    "egigeozone"    : 0.1.2    
Adapter    "ekey"          : 1.1.0    
Adapter    "email"         : 1.0.9    , installed 1.0.9
Adapter    "emby"          : 1.0.2    
Adapter    "energymanager" : 1.2.3    
Adapter    "enet"          : 1.0.1    
Adapter    "epson_ecotank_et_2750": 0.0.5   
Adapter    "epson_stylus_px830": 0.2.1   
Adapter    "epson_xp540"   : 1.0.6    
Adapter    "exchangerates" : 0.0.14   
Adapter    "fahrplan"      : 1.0.7    , installed 1.0.7
Adapter    "fakeroku"      : 0.2.1    
Adapter    "fb-checkpresence": 1.1.4   
Adapter    "feiertage"     : 1.0.17   , installed 1.0.17
Adapter    "fhem"          : 1.6.0    
Adapter    "find-my-iphone": 0.2.15   
Adapter    "firetv"        : 1.0.0    
Adapter    "flot"          : 1.10.6   
Adapter    "followthesun"  : 0.3.4    
Adapter    "foobar2000"    : 2.0.4    
Adapter    "fritzbox"      : 0.2.1    
Adapter    "fritzdect"     : 2.1.11   
Adapter    "fronius"       : 1.0.5    
Adapter    "frontier_silicon": 0.0.10  
Adapter    "fuelpricemonitor": 0.2.5   
Adapter    "fullcalendar"  : 1.1.0    
Adapter    "fullybrowser"  : 2.0.8    
Adapter    "g-homa"        : 0.5.3    
Adapter    "geofency"      : 1.0.3    
Adapter    "go-e"          : 1.0.4    
Adapter    "growatt"       : 1.0.1    
Adapter    "gruenbeck"     : 0.0.29   
Adapter    "haassohn"      : 1.0.3    
Adapter    "habpanel"      : 0.4.3    
Adapter    "haier"         : 1.0.4    
Adapter    "ham"           : 4.0.2    
Adapter    "ham-wemo"      : 2.0.0    
Adapter    "harmony"       : 1.2.2    
Adapter    "heatingcontrol": 2.3.2    
Adapter    "heos"          : 1.8.0    
Adapter    "heytech"       : 1.0.0    
Adapter    "hid"           : 0.1.17   
Adapter    "history"       : 1.9.12   , installed 1.9.12
Adapter    "hm-rega"       : 3.0.16   
Adapter    "hm-rpc"        : 1.14.37  
Adapter    "hmip"          : 1.9.0    
Adapter    "homeconnect"   : 0.0.32   
Adapter    "homee"         : 1.1.1    
Adapter    "homepilot"     : 1.0.3    
Adapter    "hp-ilo"        : 1.0.6    
Adapter    "hs100"         : 2.0.3    , installed 2.0.3
Adapter    "hue"           : 3.5.15   , installed 3.5.15
Adapter    "hue-extended"  : 2.0.0    
Adapter    "i2c"           : 1.2.0    
Adapter    "ical"          : 1.7.4    , installed 1.7.4
Adapter    "icons-addictive-flavour-png": 0.1.0   
Adapter    "icons-fatcow-hosting": 0.1.0   
Adapter    "icons-icons8"  : 0.0.1    , installed 0.0.1
Adapter    "icons-material-png": 0.1.0   , installed 0.1.0
Adapter    "icons-material-svg": 0.1.0   , installed 0.1.0
Adapter    "icons-mfd-png" : 1.0.2    , installed 1.0.2
Adapter    "icons-mfd-svg" : 1.0.2    , installed 1.0.2
Adapter    "icons-open-icon-library-png": 0.1.2   , installed 0.1.2
Adapter    "icons-ultimate-png": 1.0.1   , installed 1.0.1
Adapter    "influxdb"      : 1.9.5    
Adapter    "info"          : 1.7.14   , installed 1.7.14
Adapter    "innogy-smarthome": 0.3.6   
Adapter    "iogo"          : 0.6.5    
Adapter    "iot"           : 1.8.16   
Adapter    "iqontrol"      : 1.6.4    
Adapter    "jarvis"        : 2.1.0    
Adapter    "javascript"    : 5.1.3    , installed 5.1.3
Adapter    "jeelink"       : 0.1.0    
Controller "js-controller" : 3.2.16   , installed 3.2.16
Adapter    "kecontact"     : 1.1.2    
Adapter    "klf200"        : 1.0.1    
Adapter    "km200"         : 1.1.6    
Adapter    "knmi-weather"  : 1.0.0    
Adapter    "knx"           : 1.0.45   
Adapter    "kodi"          : 2.0.5    
Adapter    "kostal-piko-ba": 1.1.8    
Adapter    "kress"         : 2.5.5    
Adapter    "lametric"      : 1.2.0    
Adapter    "landroid"      : 1.0.3    
Adapter    "lcn"           : 1.0.2    
Adapter    "legrand-ecocompteur": 1.0.0   
Adapter    "letrika_comgw" : 0.0.5    
Adapter    "lg-ess-home"   : 0.0.10   
Adapter    "lgtv"          : 1.1.10   
Adapter    "lgtv-rs"       : 0.1.1    
Adapter    "lgtv11"        : 1.0.5    
Adapter    "lifx"          : 0.1.0    
Adapter    "lightify"      : 0.2.16   
Adapter    "link"          : 0.5.10   
Adapter    "linkeddevices" : 1.4.3    
Adapter    "linktap"       : 0.1.8    
Adapter    "linux-control" : 1.1.2    , installed 1.1.2
Adapter    "logparser"     : 1.1.0    
Adapter    "lovelace"      : 1.0.16   
Adapter    "loxone"        : 2.1.0    
Adapter    "luftdaten"     : 1.0.2    
Adapter    "lupusec"       : 1.3.4    
Adapter    "luxtronik1"    : 0.3.1    
Adapter    "material"      : 0.13.9   , installed 0.13.9
Adapter    "maxcube"       : 1.0.3    
Adapter    "maxcul"        : 1.3.1    
Adapter    "mbus"          : 2.3.4    
Adapter    "mclighting"    : 0.1.2    
Adapter    "megad"         : 1.2.1    
Adapter    "megadd"        : 0.2.0    
Adapter    "megaesp"       : 0.1.0    
Adapter    "melcloud"      : 1.1.4    
Adapter    "mercedesme"    : 0.0.50   
Adapter    "mercury"       : 0.1.4    
Adapter    "meross"        : 1.6.2    
Adapter    "meteoalarm"    : 1.2.0    
Adapter    "midea"         : 0.0.6    
Adapter    "miele"         : 0.1.5    
Adapter    "mielecloudservice": 4.2.0   
Adapter    "mihome"        : 1.3.7    
Adapter    "mihome-lamp"   : 1.1.0    
Adapter    "mihome-plug"   : 0.2.1    
Adapter    "mihome-vacuum" : 2.1.1    
Adapter    "mikrotik"      : 1.0.16   
Adapter    "milight"       : 0.3.6    
Adapter    "milight-smart-light": 1.2.0   
Adapter    "minuvis"       : 1.4.0    
Adapter    "mobile"        : 1.0.1    
Adapter    "modbus"        : 3.2.6    
Adapter    "moma"          : 1.2.8    , installed 1.2.8
Adapter    "mpd"           : 1.0.6    , installed 1.0.6
Adapter    "mqtt"          : 2.4.0    , installed 2.4.0
Adapter    "mqtt-client"   : 1.3.1    
Adapter    "musiccast"     : 0.1.5    
Adapter    "mydlink"       : 1.1.7    
Adapter    "mysensors"     : 2.0.1    
Adapter    "nanoleaf-lightpanels": 1.2.0   
Adapter    "net-tools"     : 0.1.2    , installed 0.1.2
Adapter    "netatmo"       : 1.3.3    
Adapter    "netatmo-crawler": 0.4.1   
Adapter    "nibeuplink"    : 0.4.0    
Adapter    "nina"          : 0.0.24   
Adapter    "node-red"      : 2.3.0    
Adapter    "nuki"          : 1.4.3    
Adapter    "nuki-extended" : 2.3.0    
Adapter    "nut"           : 1.5.0    
Adapter    "octoprint"     : 1.0.8    
Adapter    "odl"           : 1.1.4    
Adapter    "oilfox"        : 0.0.5    
Adapter    "omnicomm-lls"  : 0.0.7    
Adapter    "onkyo"         : 2.0.5    , installed 2.0.5
Adapter    "onvif"         : 0.4.4    
Adapter    "openhab"       : 1.1.0    
Adapter    "openligadb"    : 1.1.0    
Adapter    "openweathermap": 0.1.0    
Adapter    "opi"           : 0.1.1    
Adapter    "oppoplayer"    : 0.2.4    
Adapter    "owfs"          : 0.6.4    
Adapter    "owntracks"     : 1.0.0    
Adapter    "panasonic-viera": 1.0.2   
Adapter    "parser"        : 1.0.7    
Adapter    "paw"           : 0.0.7    , installed 0.0.7
Adapter    "pegelalarm"    : 1.2.0    
Adapter    "phantomjs"     : 1.1.2    
Adapter    "pi-hole"       : 1.3.1    
Adapter    "piface"        : 1.0.0    
Adapter    "pimatic"       : 0.3.0    
Adapter    "ping"          : 1.4.12   , installed 1.4.12
Adapter    "places"        : 1.0.0    
Adapter    "plenticore"    : 2.1.6    
Adapter    "plex"          : 0.8.11   
Adapter    "plexconnect"   : 0.0.7    
Adapter    "pollenflug"    : 1.0.6    , installed 1.0.6
Adapter    "proxmox"       : 1.3.3    
Adapter    "proxy"         : 1.2.2    
Adapter    "pushbullet"    : 0.0.11   
Adapter    "pushover"      : 2.0.3    
Adapter    "pushsafer"     : 1.0.3    
Adapter    "radar2"        : 1.0.9    , installed 1.0.9
Adapter    "radiohead"     : 1.1.1    
Adapter    "rflink"        : 2.1.6    
Adapter    "rickshaw"      : 1.0.0    
Adapter    "ring"          : 1.1.3    
Adapter    "robonect"      : 0.1.3    
Adapter    "roomba"        : 1.1.1    
Adapter    "rpi2"          : 1.2.0    , installed 1.2.0
Adapter    "s7"            : 1.2.5    
Adapter    "sainlogic"     : 0.6.6    
Adapter    "samsung"       : 0.2.9    
Adapter    "sanext"        : 0.0.5    
Adapter    "sayit"         : 1.12.2   
Adapter    "sbfspot"       : 4.0.5    
Adapter    "scenes"        : 2.3.6    , installed 2.3.6
Adapter    "schoolfree"    : 1.0.0    
Adapter    "schwoerer-ventcube": 1.3.0   
Adapter    "seq"           : 0.2.10   
Adapter    "shelly"        : 4.0.7    
Adapter    "shuttercontrol": 1.2.0    
Adapter    "sia"           : 1.0.4    
Adapter    "siegenia"      : 1.1.0    
Adapter    "simple-api"    : 2.5.3    , installed 2.6.1
Adapter    "smappee"       : 0.2.4    
Adapter    "smartcontrol"  : 1.2.1    
Adapter    "smartgarden"   : 1.0.5    
Adapter    "smartmeter"    : 3.2.1    
Adapter    "snips"         : 1.5.1    
Adapter    "snmp"          : 0.5.0    
Adapter    "socketio"      : 3.1.4    , installed 3.1.4
Adapter    "solarlog"      : 2.1.2    
Adapter    "solarviewdatareader": 1.0.2   
Adapter    "solarwetter"   : 1.0.0    
Adapter    "sonnen"        : 1.7.1    
Adapter    "sonoff"        : 2.4.0    , installed 2.4.0
Adapter    "sonos"         : 2.1.1    
Adapter    "sony-bravia"   : 1.0.1    
Adapter    "spotify-premium": 1.0.0   
Adapter    "sprinklecontrol": 0.1.7   
Adapter    "sql"           : 1.15.7   
Adapter    "squeezebox"    : 1.0.0    
Adapter    "squeezeboxrpc" : 1.3.4    
Adapter    "starline"      : 1.1.3    
Adapter    "statistics"    : 1.0.4    
Adapter    "stiebel-isg"   : 1.6.0    
Adapter    "sunnyportal"   : 0.1.5    
Adapter    "swiss-weather-api": 0.3.2   
Adapter    "synology"      : 1.0.0    
Adapter    "systeminfo"    : 0.3.1    , installed 0.3.1
Adapter    "tahoma"        : 0.3.2    
Adapter    "tankerkoenig"  : 2.0.5    
Adapter    "telegram"      : 1.8.1    , installed 1.8.1
Adapter    "terminal"      : 0.1.2    , installed 0.1.2
Adapter    "tesla-motors"  : 0.4.2    
Adapter    "text2command"  : 2.0.7    
Adapter    "tinker"        : 1.1.0    
Adapter    "tr-064"        : 4.2.12   
Adapter    "traccar"       : 0.0.9    
Adapter    "tradfri"       : 2.7.2    
Adapter    "trashschedule" : 1.1.1    
Adapter    "tunnelbroker-endpoint-updater": 0.0.1   
Adapter    "tuya"          : 3.5.9    
Adapter    "tvprogram"     : 1.1.0    
Adapter    "tvspielfilm"   : 1.0.4    
Adapter    "unifi"         : 0.5.8    
Adapter    "upnp"          : 1.0.17   
Adapter    "vaillant"      : 0.0.11   
Adapter    "valloxmv"      : 1.1.2    
Adapter    "vcard"         : 0.0.9    
Adapter    "velux"         : 0.0.7    
Adapter    "viessmann"     : 1.3.4    
Adapter    "virtualpowermeter": 1.4.2   
Adapter    "vis"           : 1.3.8    , installed 1.3.8
Adapter    "vis-bars"      : 0.1.4    
Adapter    "vis-canvas-gauges": 0.1.5   , installed 0.1.5
Adapter    "vis-colorpicker": 1.2.0   , installed 1.2.0
Adapter    "vis-fancyswitch": 1.1.0   , installed 1.1.0
Adapter    "vis-google-fonts": 0.1.0   , installed 0.1.0
Adapter    "vis-history"   : 1.0.0    , installed 1.0.0
Adapter    "vis-hqwidgets" : 1.1.7    , installed 1.1.7
Adapter    "vis-icontwo"   : 0.69.0   , installed 0.69.0
Adapter    "vis-inventwo"  : 2.8.3    , installed 2.8.3
Adapter    "vis-jqui-mfd"  : 1.0.12   , installed 1.0.12
Adapter    "vis-justgage"  : 1.0.2    , installed 1.0.2
Adapter    "vis-keyboard"  : 0.0.2    
Adapter    "vis-lcars"     : 1.0.4    , installed 1.0.4
Adapter    "vis-map"       : 1.0.4    , installed 1.0.4
Adapter    "vis-material-advanced": 1.7.0   , installed 1.7.0
Adapter    "vis-metro"     : 1.1.2    , installed 1.1.2
Adapter    "vis-players"   : 0.1.6    , installed 0.1.6
Adapter    "vis-plumb"     : 1.0.2    
Adapter    "vis-rgraph"    : 0.0.2    , installed 0.0.2
Adapter    "vis-timeandweather": 1.1.7   , installed 1.1.7
Adapter    "vis-weather"   : 2.5.3    , installed 2.5.3
Adapter    "volumio"       : 0.1.2    
Adapter    "volvo"         : 0.0.3    
Adapter    "vr200"         : 1.0.0    
Adapter    "vw-connect"    : 0.0.30   
Adapter    "weatherunderground": 3.3.0   , installed 3.3.0
Adapter    "web"           : 3.4.0    , installed 3.4.0
Adapter    "weishaupt-wem" : 0.0.9    
Adapter    "whatsapp-cmb"  : 0.1.6    
Adapter    "wiffi-wz"      : 2.2.0    
Adapter    "wifilight"     : 1.1.0    
Adapter    "windows-control": 0.1.5   
Adapter    "wled"          : 0.5.6    , installed 0.5.6
Adapter    "wm-bus"        : 0.1.12   
Adapter    "wolf"          : 1.2.1    
Adapter    "worx"          : 1.3.6    
Adapter    "xbox"          : 0.7.7    
Adapter    "xs1"           : 1.0.2    
Adapter    "yahka"         : 0.12.0   
Adapter    "yamaha"        : 0.4.0    
Adapter    "yeelight-2"    : 1.0.3    
Adapter    "youtube"       : 1.0.3    
Adapter    "yr"            : 2.0.3    
Adapter    "zigbee"        : 1.5.6    
Adapter    "zont"          : 0.5.3    
Adapter    "zwave2"        : 1.9.3    
pi@raspberrypi:/ $ 

[Thomas Braun]

@kallo
Dann würde ich vermutlich den admin (aber auch nur den!) auf die letzte Beta-Version heben).

[Kallo]

@thomas-braun Doofe Frage... wie mache ich das? Gerade beim Admin hab ich etwas Sorge, bei der Installation einen Fehler zu machen und mir noch mehr zu zerschiessen..

Der Rest bleibt eh auf stable. Ich muss nicht immer überall das neueste haben. Hauptsache aktuell und stabil.

[Thomas Braun]

@kallo
Verwahrort Beta aktiv setzen, dann in der Adapterliste den Admin aktualisieren, Verwahrort wieder auf stable zurücksetzen.

[Kallo]

@thomas-braun Genau das habe ich ja schon gemacht. 5.0.24 ist der aktuellste im beta.

[Thomas Braun]

@kallo
Ach, ich hatte 5.0.2 aus deinem Post gesehen

[Homoran]

@kallo sagte in ioBroker verliert immer wieder Verbindung zu Endgerät:

Genau das habe ich ja schon gemacht.

mach es bitte nochmal und führe dinen reload auf der Adapterseite aus
da müsste jetzt 5.1.6 sein

[Kallo]

@thomas-braun Oh ja, sorry, da hatte ich die 4 am Ende vergessen.

[Thomas Braun]

@kallo
Die letzte Beta ist

Adapter    "admin"         : 5.1.6    , installed 5.1.6

[Kallo]

@thomas-braun Mir wird in der Liste nur die 5.0.24 angezeigt. Mehrmals zwischen stable und beta hin und hergewechselt, anderen Browser genommen, nix. Bleibt bei 5.0.24.

Kann ich den Install der 5.1.6 irgendwie erzwingen?

[Thomas Braun]

@kallo

iobroker repo set Beta (latest)
iobroker update
iobroker upgrade admin@5.1.6
iobroker repo set Stable (default)
iobroker update

Bei den Namen der Repos bin ich unsicher, was die Leerzeichen angeht.
Deswegen haben die bei mir keine:

echad@chet:/opt/iobroker $ iobroker repo list
stable      : http://download.iobroker.net/sources-dist.json
beta        : http://download.iobroker.net/sources-dist-latest.json
live-beta   : http://iobroker.live/repo/sources-dist-latest.json
live-stable : http://iobroker.live/repo/sources-dist.json

Active repo: live-beta

[Kallo]

@thomas-braun

Die Repos musste ich im Admin umstellen, auf der Konsole gabs ne Fehlermeldung.

pi@raspberrypi:/ $ iobroker repo set Beta (latest)
-bash: Syntaxfehler beim unerwarteten Wort `('
pi@raspberrypi:/ $ iobroker update
Used repository: Beta (latest)
hash changed or no sources cached => force download of new sources
update done
Adapter    "accuweather"   : 1.1.6    
Adapter    "adb"           : 0.0.5    
Adapter    "admin"         : 5.1.6    , installed 5.0.24 [Updateable]
Adapter    "alarm"         : 2.0.1    
Adapter    "alexa2"        : 3.9.1    , installed 3.9.0 [Updateable]
Adapter    "alias-manager" : 1.2.2    
Adapter    "alpha2"        : 1.0.0    
Adapter    "amazon-dash"   : 1.1.0    
Adapter    "artnet"        : 1.2.2    
Adapter    "asterisk"      : 1.0.6    
Adapter    "asuswrt"       : 1.0.1    
Adapter    "b-control-em"  : 0.2.1    
Adapter    "backitup"      : 2.1.12   , installed 2.1.11 [Updateable]
Adapter    "beckhoff"      : 1.4.0    
Adapter    "benq"          : 0.2.5    
Adapter    "binance"       : 1.1.3    
Adapter    "ble"           : 0.12.0   
Adapter    "blink4home"    : 0.1.1    
Adapter    "bluelink"      : 1.0.4    
Adapter    "bmw"           : 1.4.0    
Adapter    "boblight"      : 0.0.1    
Adapter    "bosesoundtouch": 0.9.3    
Adapter    "botvac"        : 1.0.0    
Adapter    "bring"         : 1.7.7    , installed 1.7.7
Adapter    "broadlink2"    : 2.1.5    , installed 2.0.3 [Updateable]
Adapter    "bsblan"        : 0.2.2    
Adapter    "bshb"          : 0.1.13   
Adapter    "bydbatt"       : 1.0.6    
Adapter    "calendar"      : 1.2.0    
Adapter    "cameras"       : 0.1.3    
Adapter    "canbus"        : 1.1.4    
Adapter    "cec2"          : 0.1.0    
Adapter    "chromecast"    : 2.3.1    
Adapter    "cloud"         : 4.0.11   
Adapter    "comfoair"      : 1.1.5    
Adapter    "contact"       : 1.1.3    
Adapter    "contactid"     : 1.0.2    
Adapter    "coronavirus-statistics": 0.7.0-4 
Adapter    "corrently"     : 0.0.2    
Adapter    "countdown"     : 1.2.3    , installed 1.2.3
Adapter    "cul"           : 1.3.5    
Adapter    "daikin"        : 1.3.1    
Adapter    "daswetter"     : 3.0.7    , installed 3.0.7
Adapter    "deconz"        : 1.3.15   , installed 1.3.11 [Updateable]
Adapter    "denon"         : 1.10.7   
Adapter    "device-reminder": 1.2.1   
Adapter    "devices"       : 0.3.16   
Adapter    "digitalstrom"  : 2.2.0    
Adapter    "discovergy"    : 0.5.7    
Adapter    "discovery"     : 2.6.3    , installed 2.6.1 [Updateable]
Adapter    "divera247"     : 0.1.2    
Adapter    "doorbird"      : 0.1.5    
Adapter    "doorio"        : 2.0.1    
Adapter    "ds18b20"       : 1.4.1    
Adapter    "dwd"           : 2.7.5    
Adapter    "dysonairpurifier": 0.9.1   
Adapter    "easee"         : 1.0.2    
Adapter    "ebus"          : 2.2.5    
Adapter    "echarts"       : 0.4.14   
Adapter    "ecovacs-deebot": 1.1.1    
Adapter    "egigeozone"    : 0.1.2    
Adapter    "ekey"          : 1.1.0    
Adapter    "email"         : 1.0.9    , installed 1.0.9
Adapter    "emby"          : 1.0.2    
Adapter    "energymanager" : 1.2.3    
Adapter    "enet"          : 1.0.1    
Adapter    "epson_ecotank_et_2750": 0.0.5   
Adapter    "epson_stylus_px830": 0.2.1   
Adapter    "epson_xp540"   : 1.0.6    
Adapter    "esphome"       : 0.2.1-1  
Adapter    "eufy-security" : 0.5.5    
Adapter    "eventlist"     : 0.4.2    
Adapter    "exchangerates" : 0.0.14   
Adapter    "extron"        : 0.1.1    
Adapter    "fahrplan"      : 1.1.0    , installed 1.0.7 [Updateable]
Adapter    "fakeroku"      : 0.2.1    
Adapter    "fb-checkpresence": 1.1.5   
Adapter    "feiertage"     : 1.0.23   , installed 1.0.17 [Updateable]
Adapter    "fhem"          : 1.6.0    
Adapter    "find-my-iphone": 0.2.17   
Adapter    "firetv"        : 1.0.0    
Adapter    "fitbit-api"    : 0.1.1    
Adapter    "flot"          : 1.10.6   
Adapter    "followthesun"  : 0.3.4    
Adapter    "foobar2000"    : 2.0.4    
Adapter    "fritzbox"      : 0.2.1    
Adapter    "fritzdect"     : 2.1.12   
Adapter    "fronius"       : 1.1.3    
Adapter    "frontier_silicon": 0.0.10  
Adapter    "fuelpricemonitor": 0.2.5   
Adapter    "fullcalendar"  : 1.1.0    
Adapter    "fullybrowser"  : 2.0.9    
Adapter    "g-homa"        : 0.5.3    
Adapter    "geofency"      : 1.0.3    
Adapter    "go-e"          : 1.0.6    
Adapter    "googleauth"    : 0.3.2    
Adapter    "growatt"       : 1.1.1    
Adapter    "gruenbeck"     : 0.0.30   
Adapter    "haassohn"      : 1.0.3    
Adapter    "habpanel"      : 0.4.3    
Adapter    "haier"         : 1.0.4    
Adapter    "ham"           : 4.0.2    
Adapter    "ham-wemo"      : 2.0.0    
Adapter    "harmony"       : 1.2.2    
Adapter    "hass"          : 1.0.0    
Adapter    "hass-mqtt"     : 0.0.7    
Adapter    "heatingcontrol": 2.4.1    
Adapter    "heos"          : 1.8.3    
Adapter    "heytech"       : 1.0.1    
Adapter    "hid"           : 0.1.17   
Adapter    "hilink"        : 0.2.7    
Adapter    "history"       : 1.9.13   , installed 1.9.12 [Updateable]
Adapter    "hm-rega"       : 3.0.25   
Adapter    "hm-rpc"        : 1.14.38  
Adapter    "hmip"          : 1.12.1   
Adapter    "hombot"        : 0.1.3    
Adapter    "homeconnect"   : 0.0.36   
Adapter    "homee"         : 1.1.1    
Adapter    "homepilot"     : 1.1.6    
Adapter    "hp-ilo"        : 1.0.6    
Adapter    "hs100"         : 2.0.4    , installed 2.0.3 [Updateable]
Adapter    "hue"           : 3.5.19   , installed 3.5.15 [Updateable]
Adapter    "hue-extended"  : 2.0.0    
Adapter    "hyperion"      : 0.0.9    
Adapter    "hyperion_ng"   : 0.1.19   
Adapter    "i2c"           : 1.2.0    
Adapter    "ical"          : 1.9.3    , installed 1.7.4 [Updateable]
Adapter    "icons-addictive-flavour-png": 0.1.0   
Adapter    "icons-fatcow-hosting": 0.1.0   
Adapter    "icons-icons8"  : 0.0.1    , installed 0.0.1
Adapter    "icons-material-png": 0.1.0   , installed 0.1.0
Adapter    "icons-material-svg": 0.1.0   , installed 0.1.0
Adapter    "icons-mfd-png" : 1.0.2    , installed 1.0.2
Adapter    "icons-mfd-svg" : 1.0.2    , installed 1.0.2
Adapter    "icons-open-icon-library-png": 0.1.2   , installed 0.1.2
Adapter    "icons-ultimate-png": 1.0.1   , installed 1.0.1
Adapter    "influxdb"      : 1.9.5    
Adapter    "info"          : 1.7.15   , installed 1.7.14 [Updateable]
Adapter    "innogy-smarthome": 0.3.6   
Adapter    "intesishome"   : 0.1.2    
Adapter    "iogo"          : 0.6.6    
Adapter    "iot"           : 1.8.22   
Adapter    "iqontrol"      : 1.8.0    
Adapter    "jarvis"        : 2.2.0    
Adapter    "javascript"    : 5.1.3    , installed 5.1.3
Adapter    "jeelink"       : 0.1.3    
Controller "js-controller" : 3.3.11   , installed 3.2.16 [Updateable]
Adapter    "judoisoft"     : 1.0.9    
Adapter    "kecontact"     : 1.1.2    
Adapter    "klf200"        : 1.0.1    
Adapter    "km200"         : 2.0.3    
Adapter    "knmi-weather"  : 1.0.0    
Adapter    "knx"           : 1.0.45   
Adapter    "kodi"          : 2.0.7    
Adapter    "kostal-piko-ba": 1.1.8    
Adapter    "kress"         : 2.5.5    
Adapter    "lametric"      : 1.3.0    
Adapter    "landroid"      : 1.0.3    
Adapter    "lcn"           : 1.0.4    
Adapter    "legrand-ecocompteur": 1.0.0   
Adapter    "letrika_comgw" : 0.0.5    
Adapter    "lg-ess-home"   : 0.0.10   
Adapter    "lgtv"          : 1.1.10   
Adapter    "lgtv-rs"       : 0.1.1    
Adapter    "lgtv11"        : 1.0.5    
Adapter    "lifx"          : 0.1.1    
Adapter    "lightify"      : 0.2.16   
Adapter    "link"          : 0.5.10   
Adapter    "linkeddevices" : 1.4.3    
Adapter    "linktap"       : 0.1.8    
Adapter    "linux-control" : 1.1.2    , installed 1.1.2
Adapter    "logparser"     : 1.1.0    
Adapter    "lovelace"      : 1.5.0    
Adapter    "loxone"        : 2.2.1    
Adapter    "luftdaten"     : 1.0.3    
Adapter    "lupusec"       : 1.3.5    
Adapter    "luxtronik1"    : 0.3.1    
Adapter    "material"      : 0.13.9   , installed 0.13.9
Adapter    "maxcube"       : 1.0.3    
Adapter    "maxcul"        : 1.3.1    
Adapter    "mbus"          : 2.3.4    
Adapter    "mclighting"    : 0.1.2    
Adapter    "megad"         : 1.2.1    
Adapter    "megadd"        : 0.2.0    
Adapter    "megaesp"       : 0.1.0    
Adapter    "melcloud"      : 1.1.4    
Adapter    "mercedesme"    : 0.0.52   
Adapter    "mercury"       : 0.1.5    
Adapter    "meross"        : 1.6.3    
Adapter    "meteoalarm"    : 1.2.0    
Adapter    "midea"         : 0.0.7    
Adapter    "miele"         : 0.1.5    
Adapter    "mielecloudservice": 4.2.0   
Adapter    "mihome"        : 1.3.7    
Adapter    "mihome-airpurifier": 0.1.8   
Adapter    "mihome-lamp"   : 1.1.0    
Adapter    "mihome-plug"   : 0.2.1    
Adapter    "mihome-vacuum" : 3.2.0    
Adapter    "miio"          : 0.0.13   
Adapter    "mikrotik"      : 1.0.16   
Adapter    "milight"       : 0.3.6    
Adapter    "milight-smart-light": 1.2.1   
Adapter    "minuvis"       : 1.4.0    
Adapter    "mobile"        : 1.0.1    
Adapter    "modbus"        : 3.3.1    
Adapter    "moma"          : 1.2.8    , installed 1.2.8
Adapter    "mpd"           : 1.0.6    , installed 1.0.6
Adapter    "mqtt"          : 2.4.0    , installed 2.4.0
Adapter    "mqtt-client"   : 1.3.2    
Adapter    "multicast"     : 0.1.6    
Adapter    "musiccast"     : 0.1.5    
Adapter    "mydlink"       : 1.1.9    
Adapter    "myq"           : 0.1.1    
Adapter    "mysensors"     : 2.0.1    
Adapter    "mystrom"       : 0.0.3    
Adapter    "mytime"        : 0.6.1    
Adapter    "myvbus"        : 0.1.1    
Adapter    "nanoleaf-lightpanels": 1.2.0   
Adapter    "net-tools"     : 0.1.5    , installed 0.1.2 [Updateable]
Adapter    "netatmo"       : 1.3.3    
Adapter    "netatmo-crawler": 0.4.1   
Adapter    "nibeuplink"    : 0.5.1    
Adapter    "nina"          : 0.0.24   
Adapter    "node-red"      : 2.3.0    
Adapter    "noolitef"      : 0.0.4    
Adapter    "nuki"          : 1.4.4    
Adapter    "nuki-extended" : 2.3.0    
Adapter    "nut"           : 1.5.0    
Adapter    "octoprint"     : 1.1.1    
Adapter    "odl"           : 1.1.4    
Adapter    "oilfox"        : 2.1.0    
Adapter    "omnicomm-lls"  : 0.0.7    
Adapter    "omron-fins"    : 0.0.2    
Adapter    "onkyo"         : 2.0.5    , installed 2.0.5
Adapter    "onvif"         : 0.4.4    
Adapter    "openhab"       : 1.1.0    
Adapter    "openligadb"    : 1.2.0    
Adapter    "opentherm"     : 0.1.9    
Adapter    "openweathermap": 0.1.0    
Adapter    "opi"           : 0.1.1    
Adapter    "oppoplayer"    : 0.2.4    
Adapter    "owfs"          : 0.6.4    
Adapter    "owntracks"     : 1.0.0    
Adapter    "palazzetti"    : 0.0.6    
Adapter    "panasonic-viera": 2.0.0   
Adapter    "parser"        : 1.0.7    
Adapter    "paw"           : 0.3.2    , installed 0.0.7 [Updateable]
Adapter    "pegelalarm"    : 1.2.0    
Adapter    "phantomjs"     : 1.1.2    
Adapter    "philips-air"   : 0.1.0    
Adapter    "pi-hole"       : 1.3.1    
Adapter    "piface"        : 1.0.0    
Adapter    "pimatic"       : 0.3.0    
Adapter    "ping"          : 1.4.12   , installed 1.4.12
Adapter    "places"        : 1.0.0    
Adapter    "plenticore"    : 2.1.9    
Adapter    "plex"          : 0.9.1    
Adapter    "plexconnect"   : 0.0.7    
Adapter    "pollenflug"    : 1.0.6    , installed 1.0.6
Adapter    "procon-ip"     : 1.0.2    
Adapter    "proxmox"       : 1.3.4    
Adapter    "proxy"         : 1.2.2    
Adapter    "pushbullet"    : 0.0.11   
Adapter    "pushover"      : 2.0.3    
Adapter    "pushsafer"     : 1.0.3    
Adapter    "radar2"        : 2.0.1    , installed 1.0.9 [Updateable]
Adapter    "radiohead"     : 1.1.1    
Adapter    "rainbird"      : 0.2.2    
Adapter    "rflink"        : 2.1.6    
Adapter    "rickshaw"      : 1.0.0    
Adapter    "ring"          : 1.2.2    
Adapter    "roadtraffic"   : 0.2.0    
Adapter    "robonect"      : 0.1.4    
Adapter    "roomba"        : 1.1.1    
Adapter    "rpi2"          : 1.2.0    , installed 1.2.0
Adapter    "rssfeed"       : 0.0.30   
Adapter    "s7"            : 1.2.5    
Adapter    "sainlogic"     : 0.6.1    
Adapter    "samsung"       : 0.2.9    
Adapter    "sanext"        : 0.0.5    
Adapter    "sayit"         : 1.12.2   
Adapter    "sbfspot"       : 4.0.5    
Adapter    "scenes"        : 2.3.6    , installed 2.3.6
Adapter    "schoolfree"    : 1.0.0    
Adapter    "schwoerer-ventcube": 1.4.0   
Adapter    "senec"         : 1.3.2    
Adapter    "seq"           : 0.2.10   
Adapter    "shelly"        : 4.0.8    
Adapter    "shuttercontrol": 1.2.0    
Adapter    "sia"           : 1.0.4    
Adapter    "siegenia"      : 1.1.0    
Adapter    "simple-api"    : 2.6.1    , installed 2.6.1
Adapter    "slideshow"     : 0.1.4    
Adapter    "sma-em"        : 0.6.3    
Adapter    "smappee"       : 0.2.5    
Adapter    "smartcontrol"  : 1.2.1    
Adapter    "smartgarden"   : 1.0.5    
Adapter    "smartmeter"    : 3.2.1    
Adapter    "snips"         : 1.5.1    
Adapter    "snmp"          : 0.5.0    
Adapter    "socketio"      : 3.1.4    , installed 3.1.4
Adapter    "solarlog"      : 2.1.3    
Adapter    "solarviewdatareader": 1.0.2   
Adapter    "solarwetter"   : 1.0.0    
Adapter    "sonnen"        : 1.7.3    
Adapter    "sonoff"        : 2.4.0    , installed 2.4.0
Adapter    "sonos"         : 2.1.1    
Adapter    "sonus"         : 0.1.1    
Adapter    "sony-bravia"   : 1.0.3    
Adapter    "sourceanalytix": 0.4.9    
Adapter    "spotify-premium": 1.0.0   
Adapter    "sprinklecontrol": 0.1.7   
Adapter    "sql"           : 1.15.7   
Adapter    "squeezebox"    : 1.0.0    
Adapter    "squeezeboxrpc" : 1.3.4    
Adapter    "starline"      : 1.1.3    
Adapter    "statistics"    : 1.0.6    
Adapter    "stiebel-isg"   : 1.6.1    
Adapter    "stockmarket"   : 0.0.2    
Adapter    "sunnyportal"   : 0.1.5    
Adapter    "sureflap"      : 1.0.5    
Adapter    "swiss-weather-api": 0.9.2   
Adapter    "synology"      : 1.0.0    
Adapter    "systeminfo"    : 0.3.1    , installed 0.3.1
Adapter    "tado"          : 0.2.7    
Adapter    "tahoma"        : 0.3.3    
Adapter    "tankerkoenig"  : 2.0.12   
Adapter    "telegram"      : 1.8.1    , installed 1.8.1
Adapter    "terminal"      : 0.1.2    , installed 0.1.2
Adapter    "tesla-motors"  : 0.5.1    
Adapter    "text2command"  : 2.1.0    
Adapter    "tileboard"     : 0.3.1    
Adapter    "time-switch"   : 2.2.2    
Adapter    "tinker"        : 1.1.0    
Adapter    "tino"          : 1.0.0    
Adapter    "tinyrx4"       : 1.0.0    
Adapter    "todoist2"      : 0.8.6    
Adapter    "tr-064"        : 4.2.12   
Adapter    "traccar"       : 0.0.9    
Adapter    "tradfri"       : 2.7.3    
Adapter    "trashschedule" : 1.1.3    
Adapter    "tunnelbroker-endpoint-updater": 0.0.1   
Adapter    "tuya"          : 3.6.2    
Adapter    "tvprogram"     : 1.1.0    
Adapter    "tvspielfilm"   : 2.0.4    
Adapter    "twinkly"       : 0.1.8    
Adapter    "unifi"         : 0.5.10   
Adapter    "unifi-protect" : 0.0.12   
Adapter    "upnp"          : 1.0.19   
Adapter    "vaillant"      : 0.0.13   
Adapter    "valloxmv"      : 1.1.2    
Adapter    "valuetrackerovertime": 0.6.0   
Adapter    "vcard"         : 0.0.9    
Adapter    "vedirect"      : 0.1.2    
Adapter    "velux"         : 0.0.7    
Adapter    "viessmann"     : 1.3.4    
Adapter    "viessmannapi"  : 1.3.2    
Adapter    "virtualpowermeter": 1.4.2   
Adapter    "vis"           : 1.3.10   , installed 1.3.8 [Updateable]
Adapter    "vis-3dmodel"   : 0.0.10   
Adapter    "vis-bars"      : 0.1.4    
Adapter    "vis-canvas-gauges": 0.1.5   , installed 0.1.5
Adapter    "vis-colorpicker": 1.2.0   , installed 1.2.0
Adapter    "vis-fancyswitch": 1.1.0   , installed 1.1.0
Adapter    "vis-google-fonts": 0.1.0   , installed 0.1.0
Adapter    "vis-history"   : 1.0.0    , installed 1.0.0
Adapter    "vis-hqwidgets" : 1.1.7    , installed 1.1.7
Adapter    "vis-icontwo"   : 0.71.0   , installed 0.69.0 [Updateable]
Adapter    "vis-inventwo"  : 2.9.7    , installed 2.8.3 [Updateable]
Adapter    "vis-jqui-mfd"  : 1.0.12   , installed 1.0.12
Adapter    "vis-justgage"  : 1.0.2    , installed 1.0.2
Adapter    "vis-keyboard"  : 0.0.2    
Adapter    "vis-lcars"     : 1.0.4    , installed 1.0.4
Adapter    "vis-map"       : 1.0.4    , installed 1.0.4
Adapter    "vis-material"  : 0.1.3    
Adapter    "vis-material-advanced": 1.7.0   , installed 1.7.0
Adapter    "vis-material-webfont": 0.0.3   
Adapter    "vis-materialdesign": 0.5.7   
Adapter    "vis-metro"     : 1.1.2    , installed 1.1.2
Adapter    "vis-players"   : 0.1.6    , installed 0.1.6
Adapter    "vis-plumb"     : 1.0.2    
Adapter    "vis-rgraph"    : 0.0.2    , installed 0.0.2
Adapter    "vis-timeandweather": 1.1.7   , installed 1.1.7
Adapter    "vis-weather"   : 2.5.3    , installed 2.5.3
Adapter    "vivitek"       : 0.0.2    
Adapter    "vodafone-speedtest": 0.0.7   
Adapter    "volumio"       : 0.1.2    
Adapter    "volvo"         : 0.0.3    
Adapter    "vr200"         : 1.0.0    
Adapter    "vw-connect"    : 0.0.33   
Adapter    "weatherflow_udp": 0.0.15  
Adapter    "weatherunderground": 3.3.0   , installed 3.3.0
Adapter    "web"           : 3.4.1    , installed 3.4.0 [Updateable]
Adapter    "web-speedy"    : 0.2.0    
Adapter    "weblogin"      : 0.1.1    
Adapter    "weishaupt-wem" : 0.0.9    
Adapter    "whatsapp-cmb"  : 0.1.6    
Adapter    "wiffi-wz"      : 2.2.0    
Adapter    "wifilight"     : 1.1.0    
Adapter    "windows-control": 0.1.5   
Adapter    "wlanthermo-nano": 0.1.1   
Adapter    "wled"          : 0.5.6    , installed 0.5.6
Adapter    "wm-bus"        : 0.3.1    
Adapter    "wolf"          : 1.2.1    
Adapter    "wolf-smartset" : 0.2.4    
Adapter    "worx"          : 1.3.6    
Adapter    "x-touch"       : 0.2.3    
Adapter    "xbox"          : 0.7.7    
Adapter    "xs1"           : 1.0.2    
Adapter    "yahka"         : 0.13.1   
Adapter    "yamaha"        : 0.4.0    
Adapter    "yeelight-2"    : 1.0.3    
Adapter    "youtube"       : 1.1.0    
Adapter    "yr"            : 2.0.3    
Adapter    "zigbee"        : 1.5.6    
Adapter    "zoneminder"    : 0.3.3    
Adapter    "zont"          : 0.5.4    
Adapter    "zwave2"        : 1.10.1   
pi@raspberrypi:/ $ iobroker upgrade admin@5.1.6

This upgrade of "admin" will at least introduce the following changes:
==========================================================================
-> 5.1.6:
Improved the custom settings

-> 5.1.5:
Fix edit of enumeration

-> 5.1.4:
Corrected error in log

-> 5.1.3:
Improved the GUI for enumerations

-> 5.1.2:
Admin5: Fixed logs by the changing of host

-> 5.1.1:
Admin5: Fixed teh host selector
Admin5: Implemented the colored logs

-> 5.1.0:
Admin5: Fixed update of objects
Admin5: React UI is by default enabled
==========================================================================

Would you like to upgrade admin from @5.0.24 to @5.1.6 now? [(y)es, (n)o]: y
Update admin from @5.0.24 to @5.1.6
host.iobroker Adapter "system.adapter.admin.0" is stopped.
NPM version: 6.14.12
npm install iobroker.admin@5.1.6 --loglevel error --prefix "/opt/iobroker" (System call)
../authenticate_pam.cc: In function ‘void after_doing_auth(uv_work_t*, int)’:
../authenticate_pam.cc:107:87: warning: ‘v8::Local<v8::Value> Nan::MakeCallback(v8::Local<v8::Object>, v8::Local<v8::Function>, int, v8::Local<v8::Value>*)’ is deprecated [-Wdeprecated-declarations]
   Nan::MakeCallback(Nan::GetCurrentContext()->Global(), Nan::New(m->callback), 1, args);
                                                                                       ^
In file included from ../authenticate_pam.cc:23:
../../nan/nan.h:1026:46: note: declared here
   NAN_DEPRECATED inline v8::Local<v8::Value> MakeCallback(
                                              ^~~~~~~~~~~~
../authenticate_pam.cc:107:87: warning: ‘v8::Local<v8::Value> Nan::MakeCallback(v8::Local<v8::Object>, v8::Local<v8::Function>, int, v8::Local<v8::Value>*)’ is deprecated [-Wdeprecated-declarations]
   Nan::MakeCallback(Nan::GetCurrentContext()->Global(), Nan::New(m->callback), 1, args);
                                                                                       ^
In file included from ../authenticate_pam.cc:23:
../../nan/nan.h:1026:46: note: declared here
   NAN_DEPRECATED inline v8::Local<v8::Value> MakeCallback(
                                              ^~~~~~~~~~~~
../authenticate_pam.cc: In function ‘Nan::NAN_METHOD_RETURN_TYPE Authenticate(Nan::NAN_METHOD_ARGS_TYPE)’:
../authenticate_pam.cc:147:83: warning: ‘v8::Local<v8::Value> v8::Object::Get(v8::Local<v8::Value>)’ is deprecated: Use maybe version [-Wdeprecated-declarations]
   Local<Value> res = options->Get(Nan::New<String>("serviceName").ToLocalChecked());
                                                                                   ^
In file included from /home/iobroker/.cache/node-gyp/12.22.1/include/node/v8-internal.h:14,
                 from /home/iobroker/.cache/node-gyp/12.22.1/include/node/v8.h:27,
                 from /home/iobroker/.cache/node-gyp/12.22.1/include/node/node.h:67,
                 from ../../nan/nan.h:56,
                 from ../authenticate_pam.cc:23:
/home/iobroker/.cache/node-gyp/12.22.1/include/node/v8.h:3553:51: note: declared here
   V8_DEPRECATED("Use maybe version", Local<Value> Get(Local<Value> key));
                                                   ^~~
/home/iobroker/.cache/node-gyp/12.22.1/include/node/v8config.h:328:3: note: in definition of macro ‘V8_DEPRECATED’
   declarator __attribute__((deprecated(message)))
   ^~~~~~~~~~
../authenticate_pam.cc:150:69: error: no matching function for call to ‘v8::String::WriteUtf8(char [128], unsigned int)’
    serviceName->WriteUtf8(m->serviceName, sizeof(m->serviceName) - 1);
                                                                     ^
In file included from /home/iobroker/.cache/node-gyp/12.22.1/include/node/node.h:67,
                 from ../../nan/nan.h:56,
                 from ../authenticate_pam.cc:23:
/home/iobroker/.cache/node-gyp/12.22.1/include/node/v8.h:2878:7: note: candidate: ‘int v8::String::WriteUtf8(v8::Isolate*, char*, int, int*, int) const’
   int WriteUtf8(Isolate* isolate, char* buffer, int length = -1,
       ^~~~~~~~~
/home/iobroker/.cache/node-gyp/12.22.1/include/node/v8.h:2878:7: note:   no known conversion for argument 1 from ‘char [128]’ to ‘v8::Isolate*’
../authenticate_pam.cc:152:69: warning: ‘v8::Local<v8::Value> v8::Object::Get(v8::Local<v8::Value>)’ is deprecated: Use maybe version [-Wdeprecated-declarations]
   res = options->Get(Nan::New<String>("remoteHost").ToLocalChecked());
                                                                     ^
In file included from /home/iobroker/.cache/node-gyp/12.22.1/include/node/v8-internal.h:14,
                 from /home/iobroker/.cache/node-gyp/12.22.1/include/node/v8.h:27,
                 from /home/iobroker/.cache/node-gyp/12.22.1/include/node/node.h:67,
                 from ../../nan/nan.h:56,
                 from ../authenticate_pam.cc:23:
/home/iobroker/.cache/node-gyp/12.22.1/include/node/v8.h:3553:51: note: declared here
   V8_DEPRECATED("Use maybe version", Local<Value> Get(Local<Value> key));
                                                   ^~~
/home/iobroker/.cache/node-gyp/12.22.1/include/node/v8config.h:328:3: note: in definition of macro ‘V8_DEPRECATED’
   declarator __attribute__((deprecated(message)))
   ^~~~~~~~~~
../authenticate_pam.cc:155:66: error: no matching function for call to ‘v8::String::WriteUtf8(char [128], unsigned int)’
    remoteHost->WriteUtf8(m->remoteHost, sizeof(m->remoteHost) - 1);
                                                                  ^
In file included from /home/iobroker/.cache/node-gyp/12.22.1/include/node/node.h:67,
                 from ../../nan/nan.h:56,
                 from ../authenticate_pam.cc:23:
/home/iobroker/.cache/node-gyp/12.22.1/include/node/v8.h:2878:7: note: candidate: ‘int v8::String::WriteUtf8(v8::Isolate*, char*, int, int*, int) const’
   int WriteUtf8(Isolate* isolate, char* buffer, int length = -1,
       ^~~~~~~~~
/home/iobroker/.cache/node-gyp/12.22.1/include/node/v8.h:2878:7: note:   no known conversion for argument 1 from ‘char [128]’ to ‘v8::Isolate*’
../authenticate_pam.cc:160:58: error: no matching function for call to ‘v8::String::WriteUtf8(char [128], unsigned int)’
  username->WriteUtf8(m->username, sizeof(m->username) - 1);
                                                          ^
In file included from /home/iobroker/.cache/node-gyp/12.22.1/include/node/node.h:67,
                 from ../../nan/nan.h:56,
                 from ../authenticate_pam.cc:23:
/home/iobroker/.cache/node-gyp/12.22.1/include/node/v8.h:2878:7: note: candidate: ‘int v8::String::WriteUtf8(v8::Isolate*, char*, int, int*, int) const’
   int WriteUtf8(Isolate* isolate, char* buffer, int length = -1,
       ^~~~~~~~~
/home/iobroker/.cache/node-gyp/12.22.1/include/node/v8.h:2878:7: note:   no known conversion for argument 1 from ‘char [128]’ to ‘v8::Isolate*’
../authenticate_pam.cc:161:58: error: no matching function for call to ‘v8::String::WriteUtf8(char [128], unsigned int)’
  password->WriteUtf8(m->password, sizeof(m->password) - 1);
                                                          ^
In file included from /home/iobroker/.cache/node-gyp/12.22.1/include/node/node.h:67,
                 from ../../nan/nan.h:56,
                 from ../authenticate_pam.cc:23:
/home/iobroker/.cache/node-gyp/12.22.1/include/node/v8.h:2878:7: note: candidate: ‘int v8::String::WriteUtf8(v8::Isolate*, char*, int, int*, int) const’
   int WriteUtf8(Isolate* isolate, char* buffer, int length = -1,
       ^~~~~~~~~
/home/iobroker/.cache/node-gyp/12.22.1/include/node/v8.h:2878:7: note:   no known conversion for argument 1 from ‘char [128]’ to ‘v8::Isolate*’
../authenticate_pam.cc: At global scope:
../authenticate_pam.cc:170:11: error: variable or field ‘init’ declared void
 void init(Handle<Object> exports) {
           ^~~~~~
../authenticate_pam.cc:170:11: error: ‘Handle’ was not declared in this scope
../authenticate_pam.cc:170:11: note: suggested alternative: ‘rand_r’
 void init(Handle<Object> exports) {
           ^~~~~~
           rand_r
../authenticate_pam.cc:170:24: error: expected primary-expression before ‘>’ token
 void init(Handle<Object> exports) {
                        ^
../authenticate_pam.cc:170:26: error: ‘exports’ was not declared in this scope
 void init(Handle<Object> exports) {
                          ^~~~~~~
In file included from ../../nan/nan.h:56,
                 from ../authenticate_pam.cc:23:
../authenticate_pam.cc:175:31: error: ‘init’ was not declared in this scope
 NODE_MODULE(authenticate_pam, init);
                               ^~~~
/home/iobroker/.cache/node-gyp/12.22.1/include/node/node.h:736:36: note: in definition of macro ‘NODE_MODULE_X’
       (node::addon_register_func) (regfunc),                          \
                                    ^~~~~~~
../authenticate_pam.cc:175:1: note: in expansion of macro ‘NODE_MODULE’
 NODE_MODULE(authenticate_pam, init);
 ^~~~~~~~~~~
../authenticate_pam.cc:175:31: note: suggested alternative: ‘int’
 NODE_MODULE(authenticate_pam, init);
                               ^~~~
/home/iobroker/.cache/node-gyp/12.22.1/include/node/node.h:736:36: note: in definition of macro ‘NODE_MODULE_X’
       (node::addon_register_func) (regfunc),                          \
                                    ^~~~~~~
../authenticate_pam.cc:175:1: note: in expansion of macro ‘NODE_MODULE’
 NODE_MODULE(authenticate_pam, init);
 ^~~~~~~~~~~
make: *** [authenticate_pam.target.mk:109: Release/obj.target/authenticate_pam/authenticate_pam.o] Fehler 1
gyp ERR! build error 
gyp ERR! stack Error: `make` failed with exit code: 2
gyp ERR! stack     at ChildProcess.onExit (/usr/lib/node_modules/npm/node_modules/node-gyp/lib/build.js:194:23)
gyp ERR! stack     at ChildProcess.emit (events.js:314:20)
gyp ERR! stack     at Process.ChildProcess._handle.onexit (internal/child_process.js:276:12)
gyp ERR! System Linux 5.10.17-v7l+
gyp ERR! command "/usr/bin/node" "/usr/lib/node_modules/npm/node_modules/node-gyp/bin/node-gyp.js" "rebuild"
gyp ERR! cwd /opt/iobroker/node_modules/authenticate-pam
gyp ERR! node -v v12.22.1
gyp ERR! node-gyp -v v5.1.0
gyp ERR! not ok 
../src/linux/BluetoothSerialPort.cc:18:14: error: variable or field ‘InitAll’ declared void
 void InitAll(Handle<Object> exports) {
              ^~~~~~
../src/linux/BluetoothSerialPort.cc:18:14: error: ‘Handle’ was not declared in this scope
../src/linux/BluetoothSerialPort.cc:18:14: note: suggested alternative: ‘rand_r’
 void InitAll(Handle<Object> exports) {
              ^~~~~~
              rand_r
../src/linux/BluetoothSerialPort.cc:18:27: error: expected primary-expression before ‘>’ token
 void InitAll(Handle<Object> exports) {
                           ^
../src/linux/BluetoothSerialPort.cc:18:29: error: ‘exports’ was not declared in this scope
 void InitAll(Handle<Object> exports) {
                             ^~~~~~~
In file included from ../src/linux/BluetoothSerialPort.cc:12:
../src/linux/BluetoothSerialPort.cc:23:34: error: ‘InitAll’ was not declared in this scope
 NODE_MODULE(BluetoothSerialPort, InitAll)
                                  ^~~~~~~
/home/iobroker/.cache/node-gyp/12.22.1/include/node/node.h:736:36: note: in definition of macro ‘NODE_MODULE_X’
       (node::addon_register_func) (regfunc),                          \
                                    ^~~~~~~
../src/linux/BluetoothSerialPort.cc:23:1: note: in expansion of macro ‘NODE_MODULE’
 NODE_MODULE(BluetoothSerialPort, InitAll)
 ^~~~~~~~~~~
make: *** [BluetoothSerialPort.target.mk:115: Release/obj.target/BluetoothSerialPort/src/linux/BluetoothSerialPort.o] Fehler 1
gyp ERR! build error 
gyp ERR! stack Error: `make` failed with exit code: 2
gyp ERR! stack     at ChildProcess.onExit (/usr/lib/node_modules/npm/node_modules/node-gyp/lib/build.js:194:23)
gyp ERR! stack     at ChildProcess.emit (events.js:314:20)
gyp ERR! stack     at Process.ChildProcess._handle.onexit (internal/child_process.js:276:12)
gyp ERR! System Linux 5.10.17-v7l+
gyp ERR! command "/usr/bin/node" "/usr/lib/node_modules/npm/node_modules/node-gyp/bin/node-gyp.js" "configure" "build"
gyp ERR! cwd /opt/iobroker/node_modules/node-bluetooth
gyp ERR! node -v v12.22.1
gyp ERR! node-gyp -v v5.1.0
gyp ERR! not ok 
upload [4] admin.admin /opt/iobroker/node_modules/iobroker.admin/admin/words.js words.js application/javascript
Update "system.adapter.admin.0"
upload [3] admin.admin /opt/iobroker/node_modules/iobroker.admin/admin/jsonConfig.json jsonConfig.json application/json
upload [2] admin.admin /opt/iobroker/node_modules/iobroker.admin/admin/index_m.html index_m.html text/html
upload [1] admin.admin /opt/iobroker/node_modules/iobroker.admin/admin/index.html index.html text/html
upload [0] admin.admin /opt/iobroker/node_modules/iobroker.admin/admin/admin.png admin.png image/png
Adapter "admin" updated
host.iobroker Adapter "system.adapter.admin.0" is started
pi@raspberrypi:/ $ iobroker repo set Stable (default)
-bash: Syntaxfehler beim unerwarteten Wort `('
pi@raspberrypi:/ $ iobroker update
Used repository: Stable (default)
hash changed or no sources cached => force download of new sources
update done
Adapter    "admin"         : 4.2.1    , installed 5.1.6
Adapter    "alarm"         : 2.0.1    
Adapter    "alexa2"        : 3.9.0    , installed 3.9.0
Adapter    "alias-manager" : 1.2.1    
Adapter    "alpha2"        : 1.0.0    
Adapter    "amazon-dash"   : 1.1.0    
Adapter    "artnet"        : 1.2.2    
Adapter    "asterisk"      : 1.0.6    
Adapter    "asuswrt"       : 1.0.1    
Adapter    "b-control-em"  : 0.2.1    
Adapter    "backitup"      : 2.1.11   , installed 2.1.11
Adapter    "beckhoff"      : 1.4.0    
Adapter    "benq"          : 0.2.4    
Adapter    "binance"       : 1.1.3    
Adapter    "ble"           : 0.12.0   
Adapter    "bluelink"      : 1.0.4    
Adapter    "bmw"           : 1.3.3    
Adapter    "bosesoundtouch": 0.9.3    
Adapter    "botvac"        : 1.0.0    
Adapter    "bring"         : 1.7.7    , installed 1.7.7
Adapter    "broadlink2"    : 2.0.3    , installed 2.0.3
Adapter    "bsblan"        : 0.2.2    
Adapter    "bshb"          : 0.1.13   
Adapter    "bydbatt"       : 1.0.5    
Adapter    "chromecast"    : 2.3.1    
Adapter    "cloud"         : 4.0.10   
Adapter    "comfoair"      : 1.1.3    
Adapter    "contactid"     : 1.0.2    
Adapter    "coronavirus-statistics": 0.6.3   
Adapter    "countdown"     : 1.2.3    , installed 1.2.3
Adapter    "cul"           : 1.3.5    
Adapter    "daikin"        : 1.3.0    
Adapter    "daswetter"     : 3.0.7    , installed 3.0.7
Adapter    "deconz"        : 1.3.11   , installed 1.3.11
Adapter    "denon"         : 1.10.7   
Adapter    "device-reminder": 1.2.1   
Adapter    "devices"       : 0.3.16   
Adapter    "digitalstrom"  : 2.2.0    
Adapter    "discovergy"    : 0.5.4    
Adapter    "discovery"     : 2.6.1    , installed 2.6.1
Adapter    "divera247"     : 0.1.2    
Adapter    "doorio"        : 2.0.1    
Adapter    "ds18b20"       : 1.4.1    
Adapter    "dwd"           : 2.7.5    
Adapter    "dysonairpurifier": 0.9.1   
Adapter    "easee"         : 1.0.2    
Adapter    "ebus"          : 2.2.5    
Adapter    "echarts"       : 0.4.11   
Adapter    "ecovacs-deebot": 1.1.1    
Adapter    "egigeozone"    : 0.1.2    
Adapter    "ekey"          : 1.1.0    
Adapter    "email"         : 1.0.9    , installed 1.0.9
Adapter    "emby"          : 1.0.2    
Adapter    "energymanager" : 1.2.3    
Adapter    "enet"          : 1.0.1    
Adapter    "epson_ecotank_et_2750": 0.0.5   
Adapter    "epson_stylus_px830": 0.2.1   
Adapter    "epson_xp540"   : 1.0.6    
Adapter    "exchangerates" : 0.0.14   
Adapter    "fahrplan"      : 1.0.7    , installed 1.0.7
Adapter    "fakeroku"      : 0.2.1    
Adapter    "fb-checkpresence": 1.1.4   
Adapter    "feiertage"     : 1.0.17   , installed 1.0.17
Adapter    "fhem"          : 1.6.0    
Adapter    "find-my-iphone": 0.2.15   
Adapter    "firetv"        : 1.0.0    
Adapter    "flot"          : 1.10.6   
Adapter    "followthesun"  : 0.3.4    
Adapter    "foobar2000"    : 2.0.4    
Adapter    "fritzbox"      : 0.2.1    
Adapter    "fritzdect"     : 2.1.11   
Adapter    "fronius"       : 1.0.5    
Adapter    "frontier_silicon": 0.0.10  
Adapter    "fuelpricemonitor": 0.2.5   
Adapter    "fullcalendar"  : 1.1.0    
Adapter    "fullybrowser"  : 2.0.8    
Adapter    "g-homa"        : 0.5.3    
Adapter    "geofency"      : 1.0.3    
Adapter    "go-e"          : 1.0.4    
Adapter    "growatt"       : 1.0.1    
Adapter    "gruenbeck"     : 0.0.29   
Adapter    "haassohn"      : 1.0.3    
Adapter    "habpanel"      : 0.4.3    
Adapter    "haier"         : 1.0.4    
Adapter    "ham"           : 4.0.2    
Adapter    "ham-wemo"      : 2.0.0    
Adapter    "harmony"       : 1.2.2    
Adapter    "heatingcontrol": 2.3.2    
Adapter    "heos"          : 1.8.0    
Adapter    "heytech"       : 1.0.0    
Adapter    "hid"           : 0.1.17   
Adapter    "history"       : 1.9.12   , installed 1.9.12
Adapter    "hm-rega"       : 3.0.16   
Adapter    "hm-rpc"        : 1.14.37  
Adapter    "hmip"          : 1.12.1   
Adapter    "homeconnect"   : 0.0.32   
Adapter    "homee"         : 1.1.1    
Adapter    "homepilot"     : 1.0.3    
Adapter    "hp-ilo"        : 1.0.6    
Adapter    "hs100"         : 2.0.3    , installed 2.0.3
Adapter    "hue"           : 3.5.15   , installed 3.5.15
Adapter    "hue-extended"  : 2.0.0    
Adapter    "i2c"           : 1.2.0    
Adapter    "ical"          : 1.7.4    , installed 1.7.4
Adapter    "icons-addictive-flavour-png": 0.1.0   
Adapter    "icons-fatcow-hosting": 0.1.0   
Adapter    "icons-icons8"  : 0.0.1    , installed 0.0.1
Adapter    "icons-material-png": 0.1.0   , installed 0.1.0
Adapter    "icons-material-svg": 0.1.0   , installed 0.1.0
Adapter    "icons-mfd-png" : 1.0.2    , installed 1.0.2
Adapter    "icons-mfd-svg" : 1.0.2    , installed 1.0.2
Adapter    "icons-open-icon-library-png": 0.1.2   , installed 0.1.2
Adapter    "icons-ultimate-png": 1.0.1   , installed 1.0.1
Adapter    "influxdb"      : 1.9.5    
Adapter    "info"          : 1.7.14   , installed 1.7.14
Adapter    "innogy-smarthome": 0.3.6   
Adapter    "iogo"          : 0.6.5    
Adapter    "iot"           : 1.8.16   
Adapter    "iqontrol"      : 1.6.4    
Adapter    "jarvis"        : 2.1.0    
Adapter    "javascript"    : 5.1.3    , installed 5.1.3
Adapter    "jeelink"       : 0.1.0    
Controller "js-controller" : 3.2.16   , installed 3.2.16
Adapter    "kecontact"     : 1.1.2    
Adapter    "klf200"        : 1.0.1    
Adapter    "km200"         : 1.1.6    
Adapter    "knmi-weather"  : 1.0.0    
Adapter    "knx"           : 1.0.45   
Adapter    "kodi"          : 2.0.5    
Adapter    "kostal-piko-ba": 1.1.8    
Adapter    "kress"         : 2.5.5    
Adapter    "lametric"      : 1.2.0    
Adapter    "landroid"      : 1.0.3    
Adapter    "lcn"           : 1.0.2    
Adapter    "legrand-ecocompteur": 1.0.0   
Adapter    "letrika_comgw" : 0.0.5    
Adapter    "lg-ess-home"   : 0.0.10   
Adapter    "lgtv"          : 1.1.10   
Adapter    "lgtv-rs"       : 0.1.1    
Adapter    "lgtv11"        : 1.0.5    
Adapter    "lifx"          : 0.1.0    
Adapter    "lightify"      : 0.2.16   
Adapter    "link"          : 0.5.10   
Adapter    "linkeddevices" : 1.4.3    
Adapter    "linktap"       : 0.1.8    
Adapter    "linux-control" : 1.1.2    , installed 1.1.2
Adapter    "logparser"     : 1.1.0    
Adapter    "lovelace"      : 1.0.16   
Adapter    "loxone"        : 2.1.0    
Adapter    "luftdaten"     : 1.0.2    
Adapter    "lupusec"       : 1.3.4    
Adapter    "luxtronik1"    : 0.3.1    
Adapter    "material"      : 0.13.9   , installed 0.13.9
Adapter    "maxcube"       : 1.0.3    
Adapter    "maxcul"        : 1.3.1    
Adapter    "mbus"          : 2.3.4    
Adapter    "mclighting"    : 0.1.2    
Adapter    "megad"         : 1.2.1    
Adapter    "megadd"        : 0.2.0    
Adapter    "megaesp"       : 0.1.0    
Adapter    "melcloud"      : 1.1.4    
Adapter    "mercedesme"    : 0.0.50   
Adapter    "mercury"       : 0.1.4    
Adapter    "meross"        : 1.6.2    
Adapter    "meteoalarm"    : 1.2.0    
Adapter    "midea"         : 0.0.6    
Adapter    "miele"         : 0.1.5    
Adapter    "mielecloudservice": 4.2.0   
Adapter    "mihome"        : 1.3.7    
Adapter    "mihome-lamp"   : 1.1.0    
Adapter    "mihome-plug"   : 0.2.1    
Adapter    "mihome-vacuum" : 2.1.1    
Adapter    "mikrotik"      : 1.0.16   
Adapter    "milight"       : 0.3.6    
Adapter    "milight-smart-light": 1.2.0   
Adapter    "minuvis"       : 1.4.0    
Adapter    "mobile"        : 1.0.1    
Adapter    "modbus"        : 3.2.6    
Adapter    "moma"          : 1.2.8    , installed 1.2.8
Adapter    "mpd"           : 1.0.6    , installed 1.0.6
Adapter    "mqtt"          : 2.4.0    , installed 2.4.0
Adapter    "mqtt-client"   : 1.3.1    
Adapter    "musiccast"     : 0.1.5    
Adapter    "mydlink"       : 1.1.7    
Adapter    "mysensors"     : 2.0.1    
Adapter    "nanoleaf-lightpanels": 1.2.0   
Adapter    "net-tools"     : 0.1.2    , installed 0.1.2
Adapter    "netatmo"       : 1.3.3    
Adapter    "netatmo-crawler": 0.4.1   
Adapter    "nibeuplink"    : 0.4.0    
Adapter    "nina"          : 0.0.24   
Adapter    "node-red"      : 2.3.0    
Adapter    "nuki"          : 1.4.3    
Adapter    "nuki-extended" : 2.3.0    
Adapter    "nut"           : 1.5.0    
Adapter    "octoprint"     : 1.0.8    
Adapter    "odl"           : 1.1.4    
Adapter    "oilfox"        : 0.0.5    
Adapter    "omnicomm-lls"  : 0.0.7    
Adapter    "onkyo"         : 2.0.5    , installed 2.0.5
Adapter    "onvif"         : 0.4.4    
Adapter    "openhab"       : 1.1.0    
Adapter    "openligadb"    : 1.1.0    
Adapter    "openweathermap": 0.1.0    
Adapter    "opi"           : 0.1.1    
Adapter    "oppoplayer"    : 0.2.4    
Adapter    "owfs"          : 0.6.4    
Adapter    "owntracks"     : 1.0.0    
Adapter    "panasonic-viera": 1.0.2   
Adapter    "parser"        : 1.0.7    
Adapter    "paw"           : 0.0.7    , installed 0.0.7
Adapter    "pegelalarm"    : 1.2.0    
Adapter    "phantomjs"     : 1.1.2    
Adapter    "pi-hole"       : 1.3.1    
Adapter    "piface"        : 1.0.0    
Adapter    "pimatic"       : 0.3.0    
Adapter    "ping"          : 1.4.12   , installed 1.4.12
Adapter    "places"        : 1.0.0    
Adapter    "plenticore"    : 2.1.6    
Adapter    "plex"          : 0.8.11   
Adapter    "plexconnect"   : 0.0.7    
Adapter    "pollenflug"    : 1.0.6    , installed 1.0.6
Adapter    "proxmox"       : 1.3.3    
Adapter    "proxy"         : 1.2.2    
Adapter    "pushbullet"    : 0.0.11   
Adapter    "pushover"      : 2.0.3    
Adapter    "pushsafer"     : 1.0.3    
Adapter    "radar2"        : 1.0.9    , installed 1.0.9
Adapter    "radiohead"     : 1.1.1    
Adapter    "rflink"        : 2.1.6    
Adapter    "rickshaw"      : 1.0.0    
Adapter    "ring"          : 1.1.3    
Adapter    "robonect"      : 0.1.3    
Adapter    "roomba"        : 1.1.1    
Adapter    "rpi2"          : 1.2.0    , installed 1.2.0
Adapter    "s7"            : 1.2.5    
Adapter    "sainlogic"     : 0.6.6    
Adapter    "samsung"       : 0.2.9    
Adapter    "sanext"        : 0.0.5    
Adapter    "sayit"         : 1.12.2   
Adapter    "sbfspot"       : 4.0.5    
Adapter    "scenes"        : 2.3.6    , installed 2.3.6
Adapter    "schoolfree"    : 1.0.0    
Adapter    "schwoerer-ventcube": 1.3.0   
Adapter    "seq"           : 0.2.10   
Adapter    "shelly"        : 4.0.7    
Adapter    "shuttercontrol": 1.2.0    
Adapter    "sia"           : 1.0.4    
Adapter    "siegenia"      : 1.1.0    
Adapter    "simple-api"    : 2.5.3    , installed 2.6.1
Adapter    "smappee"       : 0.2.4    
Adapter    "smartcontrol"  : 1.2.1    
Adapter    "smartgarden"   : 1.0.5    
Adapter    "smartmeter"    : 3.2.1    
Adapter    "snips"         : 1.5.1    
Adapter    "snmp"          : 0.5.0    
Adapter    "socketio"      : 3.1.4    , installed 3.1.4
Adapter    "solarlog"      : 2.1.2    
Adapter    "solarviewdatareader": 1.0.2   
Adapter    "solarwetter"   : 1.0.0    
Adapter    "sonnen"        : 1.7.1    
Adapter    "sonoff"        : 2.4.0    , installed 2.4.0
Adapter    "sonos"         : 2.1.1    
Adapter    "sony-bravia"   : 1.0.1    
Adapter    "spotify-premium": 1.0.0   
Adapter    "sprinklecontrol": 0.1.7   
Adapter    "sql"           : 1.15.7   
Adapter    "squeezebox"    : 1.0.0    
Adapter    "squeezeboxrpc" : 1.3.4    
Adapter    "starline"      : 1.1.3    
Adapter    "statistics"    : 1.0.4    
Adapter    "stiebel-isg"   : 1.6.0    
Adapter    "sunnyportal"   : 0.1.5    
Adapter    "swiss-weather-api": 0.3.2   
Adapter    "synology"      : 1.0.0    
Adapter    "systeminfo"    : 0.3.1    , installed 0.3.1
Adapter    "tahoma"        : 0.3.2    
Adapter    "tankerkoenig"  : 2.0.5    
Adapter    "telegram"      : 1.8.1    , installed 1.8.1
Adapter    "terminal"      : 0.1.2    , installed 0.1.2
Adapter    "tesla-motors"  : 0.4.2    
Adapter    "text2command"  : 2.0.7    
Adapter    "tinker"        : 1.1.0    
Adapter    "tr-064"        : 4.2.12   
Adapter    "traccar"       : 0.0.9    
Adapter    "tradfri"       : 2.7.2    
Adapter    "trashschedule" : 1.1.1    
Adapter    "tunnelbroker-endpoint-updater": 0.0.1   
Adapter    "tuya"          : 3.5.9    
Adapter    "tvprogram"     : 1.1.0    
Adapter    "tvspielfilm"   : 1.0.4    
Adapter    "unifi"         : 0.5.8    
Adapter    "upnp"          : 1.0.17   
Adapter    "vaillant"      : 0.0.11   
Adapter    "valloxmv"      : 1.1.2    
Adapter    "vcard"         : 0.0.9    
Adapter    "velux"         : 0.0.7    
Adapter    "viessmann"     : 1.3.4    
Adapter    "virtualpowermeter": 1.4.2   
Adapter    "vis"           : 1.3.8    , installed 1.3.8
Adapter    "vis-bars"      : 0.1.4    
Adapter    "vis-canvas-gauges": 0.1.5   , installed 0.1.5
Adapter    "vis-colorpicker": 1.2.0   , installed 1.2.0
Adapter    "vis-fancyswitch": 1.1.0   , installed 1.1.0
Adapter    "vis-google-fonts": 0.1.0   , installed 0.1.0
Adapter    "vis-history"   : 1.0.0    , installed 1.0.0
Adapter    "vis-hqwidgets" : 1.1.7    , installed 1.1.7
Adapter    "vis-icontwo"   : 0.69.0   , installed 0.69.0
Adapter    "vis-inventwo"  : 2.8.3    , installed 2.8.3
Adapter    "vis-jqui-mfd"  : 1.0.12   , installed 1.0.12
Adapter    "vis-justgage"  : 1.0.2    , installed 1.0.2
Adapter    "vis-keyboard"  : 0.0.2    
Adapter    "vis-lcars"     : 1.0.4    , installed 1.0.4
Adapter    "vis-map"       : 1.0.4    , installed 1.0.4
Adapter    "vis-material-advanced": 1.7.0   , installed 1.7.0
Adapter    "vis-metro"     : 1.1.2    , installed 1.1.2
Adapter    "vis-players"   : 0.1.6    , installed 0.1.6
Adapter    "vis-plumb"     : 1.0.2    
Adapter    "vis-rgraph"    : 0.0.2    , installed 0.0.2
Adapter    "vis-timeandweather": 1.1.7   , installed 1.1.7
Adapter    "vis-weather"   : 2.5.3    , installed 2.5.3
Adapter    "volumio"       : 0.1.2    
Adapter    "volvo"         : 0.0.3    
Adapter    "vr200"         : 1.0.0    
Adapter    "vw-connect"    : 0.0.30   
Adapter    "weatherunderground": 3.3.0   , installed 3.3.0
Adapter    "web"           : 3.4.0    , installed 3.4.0
Adapter    "weishaupt-wem" : 0.0.9    
Adapter    "whatsapp-cmb"  : 0.1.6    
Adapter    "wiffi-wz"      : 2.2.0    
Adapter    "wifilight"     : 1.1.0    
Adapter    "windows-control": 0.1.5   
Adapter    "wled"          : 0.5.6    , installed 0.5.6
Adapter    "wm-bus"        : 0.1.12   
Adapter    "wolf"          : 1.2.1    
Adapter    "worx"          : 1.3.6    
Adapter    "xbox"          : 0.7.7    
Adapter    "xs1"           : 1.0.2    
Adapter    "yahka"         : 0.12.0   
Adapter    "yamaha"        : 0.4.0    
Adapter    "yeelight-2"    : 1.0.3    
Adapter    "youtube"       : 1.0.3    
Adapter    "yr"            : 2.0.3    
Adapter    "zigbee"        : 1.5.6    
Adapter    "zont"          : 0.5.3    
Adapter    "zwave2"        : 1.9.3    
pi@raspberrypi:/ $ 

Der neue Admin hat mich gleich so begrüßt. Das der hs100-Adapter Probleme macht sehe ich das erste mal, bisher habe ich dazu nie ne Info erhalten. Gut zu wissen...

[Thomas Braun]

@kallo
Dann muss man das escapen:

iobroker repo set 'Beta (latest)'

Dann sollte es auch in der Konsole gehen.

[Kallo]

@thomas-braun stimmt.

pi@raspberrypi:/ $ iobroker repo set 'Stable (default)'
Repository "Stable (default)" set as active.
Stable (default): http://download.iobroker.net/sources-dist.json
Beta (latest): http://download.iobroker.net/sources-dist-latest.json

Active repo: Stable (default)
pi@raspberrypi:/ $