Grafana Installation - Fehler grafana-rpi:armhf
-
@heli-wolf sagte in Grafana Installation - Fehler grafana-rpi:armhf:
bringt aber wieder einen Fehler.
versuch es mal wie alle apt Befehle mit sudo davor
-
@homoran
Vielen Dank, jetzt hat er zumindest die Installation fortgeführt.iobroker@iobroker:~ $ sudo apt install grafana Reading package lists... Done Building dependency tree... Done Reading state information... Done The following NEW packages will be installed: grafana 0 upgraded, 1 newly installed, 0 to remove and 14 not upgraded. Need to get 76.8 MB of archives. After this operation, 271 MB of additional disk space will be used. Get:1 https://packages.grafana.com/oss/deb stable/main arm64 grafana arm64 9.1.4 [76.8 MB] Fetched 76.8 MB in 29s (2,660 kB/s) Selecting previously unselected package grafana. (Reading database ... 54954 files and directories currently installed.) Preparing to unpack .../grafana_9.1.4_arm64.deb ... Unpacking grafana (9.1.4) ... dpkg: error processing archive /var/cache/apt/archives/grafana_9.1.4_arm64.deb (--unpack): trying to overwrite '/usr/lib/systemd/system/grafana-server.service', which is also in package grafana-rpi:armhf 9.1.4 dpkg-deb: error: paste subprocess was killed by signal (Broken pipe) Errors were encountered while processing: /var/cache/apt/archives/grafana_9.1.4_arm64.deb E: Sub-process /usr/bin/dpkg returned an error code (1) iobroker@iobroker:~ $ sudo /bin/systemctl enable grafana-server [sudo] password for iobroker: Synchronizing state of grafana-server.service with SysV service script with /lib/systemd/systemd-sysv-install. Executing: /lib/systemd/systemd-sysv-install enable grafana-server Created symlink /etc/systemd/system/multi-user.target.wants/grafana-server.service → /lib/systemd/system/grafana-server.service. iobroker@iobroker:~ $ sudo /bin/systemctl start grafana-server iobroker@iobroker:~ $Aber in den folgenden Zeilen besteht ein weiteres Problem:
dpkg-deb: error: paste subprocess was killed by signal (Broken pipe) Errors were encountered while processing: /var/cache/apt/archives/grafana_9.1.4_arm64.deb E: Sub-process /usr/bin/dpkg returned an error code (1) -
@heli-wolf ich hab das mal nach OffTopic verschoben.
Grafana ist kein Bestandteil von ioBroker.@heli-wolf sagte in Grafana Installation - Fehler grafana-rpi:armhf:
dpkg: error processing archive /var/cache/apt/archives/grafana_9.1.4_arm64.deb (--unpack):
ich denke du hast einen Pi?
was willst du dann mit einem 64Bit PC paket? -
@homoran said in Grafana Installation - Fehler grafana-rpi:armhf:
Bearbeiten
das habe ich nicht ausgewählt.
Wie kann ich das ändern? -
@heli-wolf sorry, mein Fehler!
arm ist nicht amd
alles gut
ab hier jann ich nicht mehr helfen, nutze Grafana nicht
-
@heli-wolf
Wie bist Du denn da prinzipiell am Start ?sudo ln -s /usr/bin/node /usr/bin/nodejs uname -m && type -P nodejs node npm && nodejs -v && node -v && npm -v && iob -v && whoami && groups && pwd && sudo apt update &> /dev/null && sudo apt update && apt policy nodejs -
@djmarc75 said in Grafana Installation - Fehler grafana-rpi:armhf:
uname -m && type -P nodejs node npm && nodejs -v && node -v && npm -v && iob -v && whoami && groups && pwd && sudo apt update &> /dev/null && sudo apt update && apt policy nodejs
iobroker@iobroker:~ $ sudo ln -s /usr/bin/node /usr/bin/nodejs iobroker@iobroker:~ $ uname -m && type -P nodejs node npm && nodejs -v && node -v && npm -v && iob -v && whoami && groups && pwd && sudo apt update &> /dev/null && sudo apt update && apt policy nodejs aarch64 /usr/bin/nodejs /usr/bin/node /usr/bin/npm v16.17.0 v16.17.0 8.15.0 4.0.23 iobroker iobroker adm tty dialout cdrom sudo audio video plugdev games users input render netdev bluetooth gpio i2c spi /home/iobroker Hit:1 http://deb.debian.org/debian bullseye InRelease Hit:2 http://deb.debian.org/debian bullseye-updates InRelease Hit:3 http://security.debian.org/debian-security bullseye-security InRelease Hit:4 http://archive.raspberrypi.org/debian bullseye InRelease Hit:5 https://packages.grafana.com/oss/deb stable InRelease Hit:6 https://deb.nodesource.com/node_16.x bullseye InRelease Hit:7 https://repos.influxdata.com/debian bullseye InRelease Reading package lists... Done Building dependency tree... Done Reading state information... Done 14 packages can be upgraded. Run 'apt list --upgradable' to see them. W: Target Packages (main/binary-arm64/Packages) is configured multiple times in /etc/apt/sources.list.d/grafana.list:1 and /etc/apt/sources.list.d/grafana.list:2 W: Target Packages (main/binary-armhf/Packages) is configured multiple times in /etc/apt/sources.list.d/grafana.list:1 and /etc/apt/sources.list.d/grafana.list:2 W: Target Packages (main/binary-all/Packages) is configured multiple times in /etc/apt/sources.list.d/grafana.list:1 and /etc/apt/sources.list.d/grafana.list:2 W: Target Translations (main/i18n/Translation-en_GB) is configured multiple times in /etc/apt/sources.list.d/grafana.list:1 and /etc/apt/sources.list.d/grafana.list:2 W: Target Translations (main/i18n/Translation-en) is configured multiple times in /etc/apt/sources.list.d/grafana.list:1 and /etc/apt/sources.list.d/grafana.list:2 W: Target Packages (main/binary-arm64/Packages) is configured multiple times in /etc/apt/sources.list.d/grafana.list:1 and /etc/apt/sources.list.d/grafana.list:3 W: Target Packages (main/binary-armhf/Packages) is configured multiple times in /etc/apt/sources.list.d/grafana.list:1 and /etc/apt/sources.list.d/grafana.list:3 W: Target Packages (main/binary-all/Packages) is configured multiple times in /etc/apt/sources.list.d/grafana.list:1 and /etc/apt/sources.list.d/grafana.list:3 W: Target Translations (main/i18n/Translation-en_GB) is configured multiple times in /etc/apt/sources.list.d/grafana.list:1 and /etc/apt/sources.list.d/grafana.list:3 W: Target Translations (main/i18n/Translation-en) is configured multiple times in /etc/apt/sources.list.d/grafana.list:1 and /etc/apt/sources.list.d/grafana.list:3 W: Target Packages (main/binary-arm64/Packages) is configured multiple times in /etc/apt/sources.list.d/grafana.list:1 and /etc/apt/sources.list.d/grafana.list:2 W: Target Packages (main/binary-armhf/Packages) is configured multiple times in /etc/apt/sources.list.d/grafana.list:1 and /etc/apt/sources.list.d/grafana.list:2 W: Target Packages (main/binary-all/Packages) is configured multiple times in /etc/apt/sources.list.d/grafana.list:1 and /etc/apt/sources.list.d/grafana.list:2 W: Target Translations (main/i18n/Translation-en_GB) is configured multiple times in /etc/apt/sources.list.d/grafana.list:1 and /etc/apt/sources.list.d/grafana.list:2 W: Target Translations (main/i18n/Translation-en) is configured multiple times in /etc/apt/sources.list.d/grafana.list:1 and /etc/apt/sources.list.d/grafana.list:2 W: Target Packages (main/binary-arm64/Packages) is configured multiple times in /etc/apt/sources.list.d/grafana.list:1 and /etc/apt/sources.list.d/grafana.list:3 W: Target Packages (main/binary-armhf/Packages) is configured multiple times in /etc/apt/sources.list.d/grafana.list:1 and /etc/apt/sources.list.d/grafana.list:3 W: Target Packages (main/binary-all/Packages) is configured multiple times in /etc/apt/sources.list.d/grafana.list:1 and /etc/apt/sources.list.d/grafana.list:3 W: Target Translations (main/i18n/Translation-en_GB) is configured multiple times in /etc/apt/sources.list.d/grafana.list:1 and /etc/apt/sources.list.d/grafana.list:3 W: Target Translations (main/i18n/Translation-en) is configured multiple times in /etc/apt/sources.list.d/grafana.list:1 and /etc/apt/sources.list.d/grafana.list:3 nodejs: Installed: 16.17.0-deb-1nodesource1 Candidate: 16.17.0-deb-1nodesource1 Version table: *** 16.17.0-deb-1nodesource1 500 500 https://deb.nodesource.com/node_16.x bullseye/main arm64 Packages 100 /var/lib/dpkg/status 12.22.12~dfsg-1~deb11u1 500 500 http://security.debian.org/debian-security bullseye-security/main arm64 Packages 12.22.5~dfsg-2~11u1 500 500 http://deb.debian.org/debian bullseye/main arm64 Packages iobroker@iobroker:~ $ -
@heli-wolf sagte in Grafana Installation - Fehler grafana-rpi:armhf:
14 packages can be upgraded
und immernoch nicht
sudo apt upgradeausgeführt
-
@djmarc75
Doch hatte ich schon ausgeführt.iobroker@iobroker:~ $ sudo apt upgrade Reading package lists... Done Building dependency tree... Done Reading state information... Done Calculating upgrade... Done The following packages will be upgraded: base-files curl dpkg dpkg-dev libcurl3-gnutls libcurl4 libdpkg-perl libpam-systemd libsystemd0 publicsuffix raspi-config systemd systemd-sysv systemd-timesyncd 14 upgraded, 0 newly installed, 0 to remove and 0 not upgraded. Need to get 12.5 MB of archives. After this operation, 5,120 B disk space will be freed. Do you want to continue? [Y/n] y Get:1 http://deb.debian.org/debian bullseye/main arm64 base-files arm64 11.1+deb11u5 [70.1 kB] Get:2 http://deb.debian.org/debian bullseye/main arm64 dpkg arm64 1.20.12 [2,521 kB] Get:3 http://archive.raspberrypi.org/debian bullseye/main arm64 raspi-config all 20220907 [31.7 kB] Get:4 http://deb.debian.org/debian bullseye/main arm64 systemd-sysv arm64 247.3-7+deb11u1 [113 kB] Get:5 http://deb.debian.org/debian bullseye/main arm64 libpam-systemd arm64 247.3-7+deb11u1 [274 kB] Get:6 http://deb.debian.org/debian bullseye/main arm64 systemd-timesyncd arm64 247.3-7+deb11u1 [130 kB] Get:7 http://deb.debian.org/debian bullseye/main arm64 systemd arm64 247.3-7+deb11u1 [4,153 kB] Get:8 http://deb.debian.org/debian bullseye/main arm64 libsystemd0 arm64 247.3-7+deb11u1 [354 kB] Get:9 http://deb.debian.org/debian bullseye/main arm64 curl arm64 7.74.0-1.3+deb11u3 [264 kB] Get:10 http://deb.debian.org/debian bullseye/main arm64 libcurl4 arm64 7.74.0-1.3+deb11u3 [324 kB] Get:11 http://deb.debian.org/debian bullseye/main arm64 dpkg-dev all 1.20.12 [2,312 kB] Get:12 http://deb.debian.org/debian bullseye/main arm64 libdpkg-perl all 1.20.12 [1,551 kB] Get:13 http://deb.debian.org/debian bullseye/main arm64 libcurl3-gnutls arm64 7.74.0-1.3+deb11u3 [321 kB] Get:14 http://deb.debian.org/debian bullseye/main arm64 publicsuffix all 20220811.1734-0+deb11u1 [127 kB] Fetched 12.5 MB in 5s (2,691 kB/s) Reading changelogs... Done (Reading database ... 54954 files and directories currently installed.) Preparing to unpack .../base-files_11.1+deb11u5_arm64.deb ... Unpacking base-files (11.1+deb11u5) over (11.1+deb11u4) ... Setting up base-files (11.1+deb11u5) ... Installing new version of config file /etc/debian_version ... (Reading database ... 54954 files and directories currently installed.) Preparing to unpack .../dpkg_1.20.12_arm64.deb ... Unpacking dpkg (1.20.12) over (1.20.11) ... Setting up dpkg (1.20.12) ... (Reading database ... 54954 files and directories currently installed.) Preparing to unpack .../systemd-sysv_247.3-7+deb11u1_arm64.deb ... Unpacking systemd-sysv (247.3-7+deb11u1) over (247.3-7) ... Preparing to unpack .../libpam-systemd_247.3-7+deb11u1_arm64.deb ... Unpacking libpam-systemd:arm64 (247.3-7+deb11u1) over (247.3-7) ... Preparing to unpack .../systemd-timesyncd_247.3-7+deb11u1_arm64.deb ... Unpacking systemd-timesyncd (247.3-7+deb11u1) over (247.3-7) ... Preparing to unpack .../systemd_247.3-7+deb11u1_arm64.deb ... Unpacking systemd (247.3-7+deb11u1) over (247.3-7) ... Preparing to unpack .../libsystemd0_247.3-7+deb11u1_arm64.deb ... Unpacking libsystemd0:arm64 (247.3-7+deb11u1) over (247.3-7) ... Setting up libsystemd0:arm64 (247.3-7+deb11u1) ... (Reading database ... 54954 files and directories currently installed.) Preparing to unpack .../0-curl_7.74.0-1.3+deb11u3_arm64.deb ... Unpacking curl (7.74.0-1.3+deb11u3) over (7.74.0-1.3+deb11u2) ... Preparing to unpack .../1-libcurl4_7.74.0-1.3+deb11u3_arm64.deb ... Unpacking libcurl4:arm64 (7.74.0-1.3+deb11u3) over (7.74.0-1.3+deb11u2) ... Preparing to unpack .../2-dpkg-dev_1.20.12_all.deb ... Unpacking dpkg-dev (1.20.12) over (1.20.11) ... Preparing to unpack .../3-libdpkg-perl_1.20.12_all.deb ... Unpacking libdpkg-perl (1.20.12) over (1.20.11) ... Preparing to unpack .../4-libcurl3-gnutls_7.74.0-1.3+deb11u3_arm64.deb ... Unpacking libcurl3-gnutls:arm64 (7.74.0-1.3+deb11u3) over (7.74.0-1.3+deb11u2) ... Preparing to unpack .../5-publicsuffix_20220811.1734-0+deb11u1_all.deb ... Unpacking publicsuffix (20220811.1734-0+deb11u1) over (20211207.1025-0+deb11u1) ... Preparing to unpack .../6-raspi-config_20220907_all.deb ... Unpacking raspi-config (20220907) over (20220901) ... Setting up libcurl3-gnutls:arm64 (7.74.0-1.3+deb11u3) ... Setting up systemd (247.3-7+deb11u1) ... Setting up systemd-timesyncd (247.3-7+deb11u1) ... Setting up libdpkg-perl (1.20.12) ... Setting up libcurl4:arm64 (7.74.0-1.3+deb11u3) ... Setting up curl (7.74.0-1.3+deb11u3) ... Setting up raspi-config (20220907) ... Setting up publicsuffix (20220811.1734-0+deb11u1) ... Setting up systemd-sysv (247.3-7+deb11u1) ... Setting up dpkg-dev (1.20.12) ... Setting up libpam-systemd:arm64 (247.3-7+deb11u1) ... Processing triggers for man-db (2.9.4-2) ... Processing triggers for dbus (1.12.20-2) ... Processing triggers for libc-bin (2.31-13+rpt2+rpi1+deb11u4) ... iobroker@iobroker:~ $ -
@heli-wolf nochmal:
sudo ln -s /usr/bin/node /usr/bin/nodejs uname -m && type -P nodejs node npm && nodejs -v && node -v && npm -v && iob -v && whoami && groups && pwd && sudo apt update &> /dev/null && sudo apt update && apt policy nodejs -
@djmarc75 said in Grafana Installation - Fehler grafana-rpi:armhf:
uname -m && type -P nodejs node npm && nodejs -v && node -v && npm -v && iob -v && whoami && groups && pwd && sudo apt update &> /dev/null && sudo apt update && apt policy nodejs
iobroker@iobroker:~ $ sudo ln -s /usr/bin/node /usr/bin/nodejs ln: failed to create symbolic link '/usr/bin/nodejs': File exists iobroker@iobroker:~ $ uname -m && type -P nodejs node npm && nodejs -v && node -v && npm -v && iob -v && whoami && groups && pwd && sudo apt update &> /dev/null && sudo apt update && apt policy nodejs aarch64 /usr/bin/nodejs /usr/bin/node /usr/bin/npm v16.17.0 v16.17.0 8.15.0 4.0.23 iobroker iobroker adm tty dialout cdrom sudo audio video plugdev games users input render netdev bluetooth gpio i2c spi /home/iobroker Hit:1 http://security.debian.org/debian-security bullseye-security InRelease Hit:2 http://deb.debian.org/debian bullseye InRelease Hit:3 http://deb.debian.org/debian bullseye-updates InRelease Hit:4 http://archive.raspberrypi.org/debian bullseye InRelease Hit:5 https://deb.nodesource.com/node_16.x bullseye InRelease Hit:6 https://packages.grafana.com/oss/deb stable InRelease Hit:7 https://repos.influxdata.com/debian bullseye InRelease Reading package lists... Done Building dependency tree... Done Reading state information... Done All packages are up to date. W: Target Packages (main/binary-arm64/Packages) is configured multiple times in /etc/apt/sources.list.d/grafana.list:1 and /etc/apt/sources.list.d/grafana.list:2 W: Target Packages (main/binary-armhf/Packages) is configured multiple times in /etc/apt/sources.list.d/grafana.list:1 and /etc/apt/sources.list.d/grafana.list:2 W: Target Packages (main/binary-all/Packages) is configured multiple times in /etc/apt/sources.list.d/grafana.list:1 and /etc/apt/sources.list.d/grafana.list:2 W: Target Translations (main/i18n/Translation-en_GB) is configured multiple times in /etc/apt/sources.list.d/grafana.list:1 and /etc/apt/sources.list.d/grafana.list:2 W: Target Translations (main/i18n/Translation-en) is configured multiple times in /etc/apt/sources.list.d/grafana.list:1 and /etc/apt/sources.list.d/grafana.list:2 W: Target Packages (main/binary-arm64/Packages) is configured multiple times in /etc/apt/sources.list.d/grafana.list:1 and /etc/apt/sources.list.d/grafana.list:3 W: Target Packages (main/binary-armhf/Packages) is configured multiple times in /etc/apt/sources.list.d/grafana.list:1 and /etc/apt/sources.list.d/grafana.list:3 W: Target Packages (main/binary-all/Packages) is configured multiple times in /etc/apt/sources.list.d/grafana.list:1 and /etc/apt/sources.list.d/grafana.list:3 W: Target Translations (main/i18n/Translation-en_GB) is configured multiple times in /etc/apt/sources.list.d/grafana.list:1 and /etc/apt/sources.list.d/grafana.list:3 W: Target Translations (main/i18n/Translation-en) is configured multiple times in /etc/apt/sources.list.d/grafana.list:1 and /etc/apt/sources.list.d/grafana.list:3 W: Target Packages (main/binary-arm64/Packages) is configured multiple times in /etc/apt/sources.list.d/grafana.list:1 and /etc/apt/sources.list.d/grafana.list:2 W: Target Packages (main/binary-armhf/Packages) is configured multiple times in /etc/apt/sources.list.d/grafana.list:1 and /etc/apt/sources.list.d/grafana.list:2 W: Target Packages (main/binary-all/Packages) is configured multiple times in /etc/apt/sources.list.d/grafana.list:1 and /etc/apt/sources.list.d/grafana.list:2 W: Target Translations (main/i18n/Translation-en_GB) is configured multiple times in /etc/apt/sources.list.d/grafana.list:1 and /etc/apt/sources.list.d/grafana.list:2 W: Target Translations (main/i18n/Translation-en) is configured multiple times in /etc/apt/sources.list.d/grafana.list:1 and /etc/apt/sources.list.d/grafana.list:2 W: Target Packages (main/binary-arm64/Packages) is configured multiple times in /etc/apt/sources.list.d/grafana.list:1 and /etc/apt/sources.list.d/grafana.list:3 W: Target Packages (main/binary-armhf/Packages) is configured multiple times in /etc/apt/sources.list.d/grafana.list:1 and /etc/apt/sources.list.d/grafana.list:3 W: Target Packages (main/binary-all/Packages) is configured multiple times in /etc/apt/sources.list.d/grafana.list:1 and /etc/apt/sources.list.d/grafana.list:3 W: Target Translations (main/i18n/Translation-en_GB) is configured multiple times in /etc/apt/sources.list.d/grafana.list:1 and /etc/apt/sources.list.d/grafana.list:3 W: Target Translations (main/i18n/Translation-en) is configured multiple times in /etc/apt/sources.list.d/grafana.list:1 and /etc/apt/sources.list.d/grafana.list:3 nodejs: Installed: 16.17.0-deb-1nodesource1 Candidate: 16.17.0-deb-1nodesource1 Version table: *** 16.17.0-deb-1nodesource1 500 500 https://deb.nodesource.com/node_16.x bullseye/main arm64 Packages 100 /var/lib/dpkg/status 12.22.12~dfsg-1~deb11u1 500 500 http://security.debian.org/debian-security bullseye-security/main arm64 Packages 12.22.5~dfsg-2~11u1 500 500 http://deb.debian.org/debian bullseye/main arm64 Packages iobroker@iobroker:~ $ -
@heli-wolf
puh, da weiss ich auch nicht weiter.
Vielleicht kann da mal @thomas-braun drauf schauen wenn er Zeit und Muße hat. -
@djmarc75
wie kann ich eine Datei umbenennen bzw. Löschen.
mit dem Befehl
rm grafana_9.1.4_arm64.deb
lässt er es nicht zu.
ebenfalls funktioniert das Umbenennen mit MV auch nicht. -
@heli-wolf sagte in Grafana Installation - Fehler grafana-rpi:armhf:
rm grafana_9.1.4_arm64.deb
Was hast Du da vor ??
-
@djmarc75
ich habe jetzt die Grafanainstallation entfernt und neu installiert und dabei die richtigen Dateien installiert.
aber leider hat er die alte Version der grafana_9.1.4_arm64.deb noch im Archiv und das stößt bei der Installation auf Probleme.iobroker@iobroker:~ $ sudo apt install grafana Reading package lists... Done Building dependency tree... Done Reading state information... Done The following NEW packages will be installed: grafana 0 upgraded, 1 newly installed, 0 to remove and 0 not upgraded. Need to get 0 B/76.8 MB of archives. After this operation, 271 MB of additional disk space will be used. (Reading database ... 54954 files and directories currently installed.) Preparing to unpack .../grafana_9.1.4_arm64.deb ... Unpacking grafana (9.1.4) ... dpkg: error processing archive /var/cache/apt/archives/grafana_9.1.4_arm64.deb ( --unpack): trying to overwrite '/usr/lib/systemd/system/grafana-server.service', which is also in package grafana-rpi:armhf 9.1.4 dpkg-deb: error: paste subprocess was killed by signal (Broken pipe) Errors were encountered while processing: /var/cache/apt/archives/grafana_9.1.4_arm64.deb E: Sub-process /usr/bin/dpkg returned an error code (1)Jetzt wollte ich die besagte Datei löschen um so die Installation ohne Konflikt vornehmen zu können.
-
@heli-wolf sagte in Grafana Installation - Fehler grafana-rpi:armhf:
ohne Konflikt
da ist kein Konflikt
da hast du wohl etwas am Paketmanager vorbei kaputt gespielt
@heli-wolf sagte in Grafana Installation - Fehler grafana-rpi:armhf:
Broken pipe
-
wie kann man den Rohrbruch beseitigen?
-
@heli-wolf sagte in Grafana Installation - Fehler grafana-rpi:armhf:
wie kann man den Rohrbruch beseitigen?
keine Ahnung.
Aber vielleicht kann @thomas-braun da helfen, wenn er Zeit hat -
Bin gerade am Handy. Schau später mit großem Monitor mal rein. Aber da sind falsche list-Dateien und falsche Pakete installiert, wenn ich das richtig sehe.
-
Vielen Dank !!!
