SONOFF NSPanel mit Lovelace UI

TT-Tom

läuft das Script im Hintergrund noch? ich würde das mal anhalten.
schau bitte in die Autoexec.be rein was da drin steht. ist da wirklich die version 10 drin??

EDIT: du lädst die version 4.9.5 nicht 5.0.0

Armilar

@tt-tom

Ja ist der Berry 10... Das Log ist das neue...

Aber warum ne alte 4.9.5?

Der Berry sorgt eigentlich dafür, das beim Flashvorgang die Rules vorher deaktiviert werden und mqtt-Messages nicht an das TFT weitergeleitet werden...

Dennoch finde ich es ratsam, wenn solche Probleme aktiv sind, Tasmota nicht unsinnig über MQTT zu beschießen...

australien

@tt-tom
das script läuft nicht mehr..

die autoexec.be

# Sonoff NSPanel Tasmota Lovelace UI Berry Driver (improved Message Handling)| code by Armilar
# based on;
# Sonoff NSPanel Tasmota Lovelace UI Berry Driver (Extended Flashing to faster speeds; improved Error Handling)| code by joBr99
# based on;
# Sonoff NSPanel Tasmota (Nextion with Flashing) driver | code by peepshow-21
# based on;
# Sonoff NSPanel Tasmota driver v0.47 | code by blakadder and s-hadinger

# Example Flash
# FlashNextion http://nspanel.de/nspanel-vX.X.X.tft

class Nextion : Driver

    static header = bytes('55BB')

    static flash_block_size = 4096

    var flash_mode
    var flash_start_millis
    var flash_size
    var flash_written
    var flash_buff
    var flash_offset
    var flash_proto_version
    var flash_proto_baud
    var awaiting_offset
    var tcp
    var ser
    var last_per
    var url

    def split_55(b)
      var ret = []
      var s = size(b)   
      var i = s-2   # start from last-1
      while i > 0
        if b[i] == 0x55 && b[i+1] == 0xBB           
          ret.push(b[i..s-1]) # push last msg to list
          b = b[(0..i-1)]   # write the rest back to b
        end
        i -= 1
      end
      ret.push(b)
      return ret
    end

    def crc16(data, poly)
      if !poly  poly = 0xA001 end
      # CRC-16 MODBUS HASHING ALGORITHM
      var crc = 0xFFFF
      for i:0..size(data)-1
        crc = crc ^ data[i]
        for j:0..7
          if crc & 1
            crc = (crc >> 1) ^ poly
          else
            crc = crc >> 1
          end
        end
      end
      return crc
    end

    # encode using custom protocol 55 BB [payload length] [payload length] [payload] [crc] [crc]
    def encode(payload)
      var b = bytes()
      b += self.header
      b.add(size(payload), 2)   # add size as 2 bytes, little endian
      b += bytes().fromstring(payload)
      var msg_crc = self.crc16(b)
      b.add(msg_crc, 2)       # crc 2 bytes, little endian
      return b
    end

    def encodenx(payload)
        var b = bytes().fromstring(payload)
        b += bytes('FFFFFF')
        return b
    end

    def sendnx(payload)
        import string
        var payload_bin = self.encodenx(payload)
        self.ser.write(payload_bin)
        log(string.format("NXP: Nextion command sent = %s",str(payload_bin)), 3)       
    end

    def send(payload)
        var payload_bin = self.encode(payload)
        if self.flash_mode==1
            log("NXP: skipped command because still flashing", 3)
        else 
            self.ser.write(payload_bin)
            log("NXP: payload sent = " + str(payload_bin), 3)
        end
    end

    def write_to_nextion(b)
        self.ser.write(b)
    end

    def screeninit()
        log("NXP: Screen Initialized")
        self.sendnx("recmod=1")        
    end

    def write_block()
        
        import string
        #log("FLH: Read block",3)
        while size(self.flash_buff)<self.flash_block_size && self.tcp.connected()
            if self.tcp.available()>0
                self.flash_buff += self.tcp.readbytes(4096)
            else
                tasmota.delay(50)
                log("FLH: Wait for available...",4)
            end
        end
        #log("FLH: Buff size "+str(size(self.flash_buff)),3)
        var to_write
        if size(self.flash_buff)>self.flash_block_size
            to_write = self.flash_buff[0..self.flash_block_size-1]
            self.flash_buff = self.flash_buff[self.flash_block_size..]
        else
            to_write = self.flash_buff
            self.flash_buff = bytes()
        end
        #log("FLH: Writing "+str(size(to_write)),3)
        var per = (self.flash_written*100)/self.flash_size
        if (self.last_per!=per) 
            self.last_per = per
            tasmota.publish_result(string.format("{\"Flashing\":{\"complete\": \"%d\", \"time_elapsed\": %d}}",per , (tasmota.millis()-self.flash_start_millis)/1000), "RESULT") 
        end
        if size(to_write)>0
            self.flash_written += size(to_write)
            self.ser.write(to_write)
        end
        #log("FLH: Total "+str(self.flash_written),3)
        log("FLH: Read block - Writing: "+str(size(to_write))+" - Total: "+str(self.flash_written)+" - Buffer size: "+str(size(self.flash_buff)) ,3)
        if (self.flash_written==self.flash_size)
	    tasmota.delay(25)
            log("FLH: Flashing complete - Time elapsed: %d", (tasmota.millis()-self.flash_start_millis)/1000)
            tasmota.publish_result(string.format("{\"Flashing\":{\"complete\": \"done\", \"time_elapsed\": %d}}",per , (tasmota.millis()-self.flash_start_millis)/1000), "RESULT")
            tasmota.cmd('RuleTimer3 120')
            tasmota.cmd('Rule3 1')
            tasmota.delay(50)
            self.flash_mode = 0
            self.ser.deinit()
            self.ser = serial(17, 16, 115200, serial.SERIAL_8N1)
        end

    end

    def every_100ms()
        import string
        if self.ser.available() > 0
            var msg = self.ser.read()
            if size(msg) > 0
                log(string.format("NXP: Received Raw = %s",str(msg)), 4)
                if (self.flash_mode==1)
                    var strv = msg[0..-4].asstring()
                    if string.find(strv,"comok 2")>=0
                        tasmota.delay(20)
                        log("FLH: Send (High Speed) flash start")
                        self.flash_start_millis = tasmota.millis()
                        #self.sendnx(string.format("whmi-wris %d,115200,res0",self.flash_size))
                        if self.flash_proto_version == 0
                            self.sendnx(string.format("whmi-wri %d,%d,res0",self.flash_size,self.flash_proto_baud))
                        else
                            self.sendnx(string.format("whmi-wris %d,%d,res0",self.flash_size,self.flash_proto_baud))
                        end
                        if self.flash_proto_baud != 115200
                            tasmota.delay(20)
                            self.ser.deinit()
                            self.ser = serial(17, 16, self.flash_proto_baud, serial.SERIAL_8N1)
                        end
                    elif size(msg)==1 && msg[0]==0x08
                        log("FLH: Waiting offset...",3)
                        self.awaiting_offset = 1
                    elif size(msg)==4 && self.awaiting_offset==1
                        self.awaiting_offset = 0
                        self.flash_offset = msg.get(0,4)
                        log("FLH: Flash offset marker "+str(self.flash_offset),3)
                        if self.flash_offset != 0
                            self.open_url_at(self.url, self.flash_offset)
                            self.flash_written = self.flash_offset
                        end
                        self.write_block()
                    elif size(msg)==1 && msg[0]==0x05
                        self.write_block()
                    else
                        log("FLH: Something has gone wrong flashing display firmware ["+str(msg)+"]",2)
                    end
                else
                    var msg_list = self.split_55(msg)
                    for i:0..size(msg_list)-1
                        msg = msg_list[i]
                        if size(msg) > 0
                            if msg == bytes('000000FFFFFF88FFFFFF')
                                self.screeninit()
                            elif size(msg)>=2 && msg[0]==0x55 && msg[1]==0xBB
                                var jm = string.format("{\"CustomRecv\":\"%s\"}",msg[4..-3].asstring())
                                tasmota.publish_result(jm, "RESULT")        
                            elif msg[0]==0x07 && size(msg)==1 # BELL/Buzzer
                                tasmota.cmd("buzzer 1,1")
                            else
                                var jm = string.format("{\"nextion\":\"%s\"}",str(msg[0..-4]))
                                tasmota.publish_result(jm, "RESULT")        
                            end
                        end       
                    end
                end
            end
        end
    end      

    def begin_nextion_flash()
        tasmota.cmd('RuleTimer3 0')
        tasmota.cmd('Rule3 0')
        self.flash_written = 0
        self.awaiting_offset = 0
        self.flash_offset = 0
        self.sendnx('DRAKJHSUYDGBNCJHGJKSHBDN')
        self.sendnx('recmod=0')
        #self.sendnx('recmod=0')
        self.flash_mode = 1
        self.sendnx("connect")        
    end
    
    def open_url_at(url, pos)
        self.url = url
        import string
        var host
        var port
        var s1 = string.split(url,7)[1]
        var i = string.find(s1,":")
        var sa
        if i<0
            port = 80
            i = string.find(s1,"/")
            sa = string.split(s1,i)
            host = sa[0]
        else
            sa = string.split(s1,i)
            host = sa[0]
            s1 = string.split(sa[1],1)[1]
            i = string.find(s1,"/")
            sa = string.split(s1,i)
            port = int(sa[0])
        end
        var get = sa[1]
        log(string.format("FLH: host: %s, port: %s, get: %s",host,port,get))
        self.tcp = tcpclient()
        self.tcp.connect(host,port)
        log("FLH: Connected:"+str(self.tcp.connected()),3)
        var get_req = "GET "+get+" HTTP/1.0\r\n"
        get_req += string.format("Range: bytes=%d-\r\n", pos)
        get_req += string.format("HOST: %s:%s\r\n\r\n",host,port)
        self.tcp.write(get_req)
        var a = self.tcp.available()
        i = 1
        while a==0 && i<5
          tasmota.delay(100*i)
          tasmota.yield() 
          i += 1
          log("FLH: Retry "+str(i),3)
          a = self.tcp.available()
        end
        if a==0
            log("FLH: Nothing available to read!",3)
            return
        end
        var b = self.tcp.readbytes()
        i = 0
        var end_headers = false;
        var headers
        while i<size(b) && headers==nil
            if b[i..(i+3)]==bytes().fromstring("\r\n\r\n") 
                headers = b[0..(i+3)].asstring()
                self.flash_buff = b[(i+4)..]
            else
                i += 1
            end
        end
        #print(headers)
        # check http respose for code 200/206
        if string.find(headers,"200 OK")>0 || string.find(headers,"206 Partial Content")>0
            log("FLH: HTTP Respose is 200 OK or 206 Partial Content",3)
        else
            log("FLH: HTTP Respose is not 200 OK or 206 Partial Content",3)
            print(headers)
            return -1
        end
        # only set flash size if pos is zero
        if pos == 0
            # check http respose for content-length
            var tag = "Content-Length: "
            i = string.find(headers,tag)
            if (i>0) 
                var i2 = string.find(headers,"\r\n",i)
                var s = headers[i+size(tag)..i2-1]
                self.flash_size=int(s)
            end
            log("FLH: Flash file size: "+str(self.flash_size),3)
        end

    end

    def flash_nextion(url)
        self.flash_size = 0
        var res = self.open_url_at(url, 0)
        if res != -1
            self.begin_nextion_flash()
        end
    end

    def init()
        log("NXP: Initializing Driver")
        self.ser = serial(17, 16, 115200, serial.SERIAL_8N1)
        self.flash_mode = 0
        self.flash_proto_version = 1
        self.flash_proto_baud = 921600
    end

end

var nextion = Nextion()

tasmota.add_driver(nextion)

def get_current_version(cmd, idx, payload, payload_json)
    import string
    var version_of_this_script = 10
    var jm = string.format("{\"nlui_driver_version\":\"%s\"}", version_of_this_script)
    tasmota.publish_result(jm, "RESULT")
end

tasmota.add_cmd('GetDriverVersion', get_current_version)

def update_berry_driver(cmd, idx, payload, payload_json)
    def task()
        import path
        import string
		if string.find(payload, ".tapp") > 0
		    print("tapp in URL; will do .tapp update and migration if necessary")
			
			if path.exists("autoexec.be")
			    print("autoexec.be found; will check for migration")
				var autoexecfile = open('autoexec.be')
				var line = autoexecfile.readline()
				autoexecfile.close()
				if string.find(line, "NSPanel Tasmota Lovelace UI Berry Driver") > 0
			        print("found lovelace berry driver, going to delete autoexec.be and .bec")
					path.remove("autoexec.be")
					path.remove("autoexec.bec")
				end
			end
			
			var r = tasmota.urlfetch(payload, "nsp-lovelace-driver.tapp")
            if r < 0
                print("Update failed")
            else
                tasmota.cmd("Restart 1")
            end
			
		elif string.find(payload, ".be") > 0
		    print("be in URL; will do .be update")
			if path.exists("nsp-lovelace-driver.tapp")
			    print("Error: there is the tapp version of the berry driver installed; cannot do .be update.")
			else
                var cl = webclient()
                cl.begin(payload)
                var r = cl.GET()
                if r == 200
                    print("Sucessfully downloaded nspanel-lovelace-ui berry driver")
                else
                    print("Error while downloading nspanel-lovelace-ui berry driver")
                end
                r = cl.write_file("autoexec.be")
                if r < 0
                    print("Error while writeing nspanel-lovelace-ui berry driver")
                else
                    print("Sucessfully written nspanel-lovelace-ui berry driver")
                    tasmota.cmd("Restart 1")
                end
			end
		else
			print("invalid url filetype")
		end
		
		
		
        if path.exists("nsp-lovelace-driver.tapp")
            var r = string.find(payload, ".tapp")
            if r < 0
                print("URL doesn't contain .tapp skipping update")
            else

            end
        else
            var r = string.find(payload, ".be")
            if r < 0
                print("URL doesn't contain .be skipping update")
            else
        
            end                
        end
    end
    tasmota.set_timer(0,task)
    tasmota.resp_cmnd_done()
end

tasmota.add_cmd('UpdateDriverVersion', update_berry_driver)

def flash_nextion(cmd, idx, payload, payload_json)
    def task()
    nextion.flash_proto_version = 1
    nextion.flash_proto_baud = 921600
        nextion.flash_nextion(payload)
    end
    tasmota.set_timer(0,task)
    tasmota.resp_cmnd_done()
end

def flash_nextion_adv(cmd, idx, payload, payload_json)
    def task()        
        if idx==0
            nextion.flash_proto_version = 1
            nextion.flash_proto_baud = 921600
        elif idx==1
            nextion.flash_proto_version = 0
            nextion.flash_proto_baud = 921600
        elif idx==2
            nextion.flash_proto_version = 1
            nextion.flash_proto_baud = 115200
        elif idx==3
            nextion.flash_proto_version = 0
            nextion.flash_proto_baud = 115200
        elif idx==4
            nextion.flash_proto_version = 1
            nextion.flash_proto_baud = 256000
        elif idx==5
            nextion.flash_proto_version = 0
            nextion.flash_proto_baud = 256000
        elif idx==6
            nextion.ser.deinit()
            nextion.ser = serial(17, 16, 9600, serial.SERIAL_8N1)
            nextion.flash_proto_version = 0
            nextion.flash_proto_baud = 921600
        else
            nextion.flash_proto_version = 0
            nextion.flash_proto_baud = 115200
        end
        
        nextion.flash_nextion(payload)
    end
    tasmota.set_timer(0,task)
    tasmota.resp_cmnd_done()
end

def send_cmd(cmd, idx, payload, payload_json)
    nextion.sendnx(payload)
    tasmota.resp_cmnd_done()
end

def send_cmd2(cmd, idx, payload, payload_json)
    nextion.send(payload)
    tasmota.resp_cmnd_done()
end

tasmota.add_cmd('Nextion', send_cmd)
tasmota.add_cmd('CustomSend', send_cmd2)
tasmota.add_cmd('FlashNextion', flash_nextion)
tasmota.add_cmd('FlashNextionAdv', flash_nextion_adv)

Armilar

@australien

@TT-Tom

TT-Tom

@armilar
ich hatte die Versionsmeldung gesucht im Log, gibt aber keine, oder??

Armilar

@tt-tom

die Berry-Abfrage machen wir erst im Script... Dann sieht man sie auch im Log

TT-Tom

@armilar
JA die kenn ich, dachte der Treiber meldet sich selber mit der Version.

Armilar

@tt-tom

die Prüfung ist eigentlich ganz simpel

in der Tasmota Konsole:

GetDriverVersion

eingeben...

australien

egal welche Version ich installieren will, immer bei Buffer um 4788224 ist schluss

20:57:53.583 FLH: Read block - Writing: 4096 - Total: 4784128 - Buffer size: 1395
20:57:53.782 FLH: Read block - Writing: 4096 - Total: 4788224 - Buffer size: 1395

Armilar

@australien

Das sind die insgesamt übertragenen Bytes. Der Buffer ist hinten und das verwirrt mich etwas, da der bei dir konstant bei 1395 (auch in vorherigen Screenshots) ist.

Bei mir ist der sehr dynamisch:

Was ist das für ne Tasmota-Version?
Ist neben dem Berry da sonst noch etwas im Dateiverzeichnis?

Bei mir schlägt auch nur 1% der FlashNextion fehl... Und dann gab es in der Regel auch tatsächlich einen Verbindungsabbruch... D.h. 99% laufen stabil durch...

Würde gerne mal wissen wie dieser konstante "Buffer size" zustande kommt...

EDIT:

Könntest du mal die Varianten:

FlashNextionAdv1 http://nspanel.de/nspanel-v5.0.0.tft

FlashNextionAdv2 http://nspanel.de/nspanel-v5.0.0.tft

und

FlashNextionAdv3 http://nspanel.de/nspanel-v5.0.0.tft

testen?

NEWS

SONOFF NSPanel mit Lovelace UI

Support us

562
Online

32.0k
Users

80.6k
Topics

1.3m
Posts

NEWS

SONOFF NSPanel mit Lovelace UI

Support us

562Online

32.0kUsers

80.6kTopics

1.3mPosts

562
Online

32.0k
Users

80.6k
Topics

1.3m
Posts