journalctl getcwd() failed: No such file or directory
-
@boehserwolf sagte in journalctl getcwd() failed: No such file or directory:
Folgendes Fehlerbild tritt nach JEDEM Update eines Adapters im journalctl auf:
Wie führst du ein Update aus?
Die Meldung kommt i.d.R., wenn aus einem Verzeichnis heraus operiert wird, was gelöscht wurde. Kann z. B. bei temporären Verzeichnissen passieren.Hier ist es ausführlich erklärt:
-
@thomas-braun
Update läuft bei mir immer per Admin-Instanz.Ich meine mich zu erinnern, dass das Thema nach dem letzten nodejs Update auf v16.x zuerst aufgetreten ist.
Möglicherweise ist der Link von dir aber der Wink in die richtige Richtung. Mein User iobroker hat als shell nologin konfiguriert:
iobroker:x:1001:1001::/home/iobroker:/usr/sbin/nologinDas heißt also, der User darf sich nicht direkt einloggen:
root@iobroker:~:$ su - iobroker This account is currently not available. root@iobroker:~:$ su - iobroker -s /bin/bash bash: /home/iobroker/.iobroker/iobroker_completions: No such file or directory iobroker@iobroker:/opt/iobroker$Könnte mir vorstellen, dass das mittlerweile ein Problem ist. Denn nun sehe ich gerade, dass iobroker die Datei iobroker_completions benötigt.
Vermutlich ist die fehlende Datei die eigentliche Ursache. Was sollte in dieser Datei stehen?
-
@boehserwolf
Und ich könnte mir vorstellen, dass du mit den falschen usern unterwegs bist.
Nie als root und als iobroker loggt man sich auch nicht ein, weil der als Systemuser angelegt ist. Als solcher ist /usr/sbin/nologin auch vollkommen korrekt.Leg dir also einen Standarduser an, hau den in die Gruppe
iobrokerund dann agierst du mit dem. -
@thomas-braun
Soweit so klar - den Standard-User habe ich wohl, da ich diese Diskussion vermeiden möchte
Nunja zu spät...Hier ging es nur um das Prinzip und Ursachenforschung sowie Darstellung einer möglichen Problematik.
Interpretiere ich dich nun richtig, dass du die Ursache eher weder am nologin noch an der fehlenden Datei iobroker_completions vermutest?
Weil dann fällt mir derzeit keine Ursache für meine ursprüngliche Problematik ein.
-
@boehserwolf sagte in journalctl getcwd() failed: No such file or directory:
iobroker_completions
Die
iobroker_completionsliegt in ~/.iobroker des Standardusers (bei dir wohl mit der UID=1000).Bekommst du die Meldungen auch wenn mit dem Standarduser im Terminal aktualisiert wird?
iob update iob upgrade -
@thomas-braun
Derzeit bin ich "leider" aktuell, so dass ich es nicht sagen kann:boehserwolf@iobroker:~:$ iob update Used repository: Stable (default) Adapter "admin" : 6.3.5 , installed 6.3.5 Adapter "alarm" : 3.3.11 , installed 3.3.11 Adapter "backitup" : 2.6.19 , installed 2.6.19 Adapter "daswetter" : 3.1.8 , installed 3.1.8 Adapter "device-watcher": 2.9.1 , installed 2.9.1 Adapter "devices" : 1.1.2 , installed 1.1.2 Adapter "discovery" : 3.1.0 , installed 3.1.0 Adapter "dwd" : 2.8.3 , installed 2.8.3 Adapter "flot" : 1.11.0 , installed 1.11.0 Adapter "followthesun" : 0.4.1 , installed 0.4.1 Adapter "hm-rega" : 3.0.46 , installed 3.0.46 Adapter "hm-rpc" : 1.15.16 , installed 1.15.16 Adapter "hue" : 3.7.1 , installed 3.7.1 Adapter "ical" : 1.13.2 , installed 1.13.2 Adapter "icons-mfd-svg": 1.1.0 , installed 1.1.0 Adapter "influxdb" : 3.2.0 , installed 3.2.0 Adapter "info" : 1.9.26 , installed 1.9.26 Adapter "javascript" : 6.1.4 , installed 6.1.4 Controller "js-controller": 4.0.24 , installed 4.0.24 Adapter "mqtt" : 4.0.7 , installed 4.0.7 Adapter "nut" : 1.6.0 , installed 1.6.0 Adapter "scenes" : 2.3.9 , installed 2.3.9 Adapter "shelly" : 6.3.1 , installed 6.3.1 Adapter "simple-api" : 2.7.2 , installed 2.7.2 Adapter "socketio" : 4.2.0 , installed 4.2.0 Adapter "squeezeboxrpc": 1.3.9 , installed 1.3.10 Adapter "statistics" : 2.3.0 , installed 2.3.0 Adapter "telegram" : 1.15.2 , installed 1.15.2 Adapter "trashschedule": 2.2.0 , installed 2.2.0 Adapter "vis" : 1.4.16 , installed 1.4.16 Adapter "vis-colorpicker": 1.2.0 , installed 1.2.0 Adapter "vis-history" : 1.0.0 , installed 1.0.0 Adapter "vis-hqwidgets": 1.3.0 , installed 1.3.0 Adapter "vis-jqui-mfd" : 1.0.12 , installed 1.0.12 Adapter "vis-justgage" : 1.0.2 , installed 1.0.2 Adapter "vis-metro" : 1.2.0 , installed 1.2.0 Adapter "vis-plumb" : 1.0.2 , installed 1.0.2 Adapter "vis-timeandweather": 1.2.2, installed 1.2.2 Adapter "vis-weather" : 2.5.6 , installed 2.5.6 Adapter "web" : 4.3.0 , installed 4.3.0 Adapter "ws" : 1.3.0 , installed 1.3.0 boehserwolf@iobroker:~:$ iob upgrade All adapters are up to dateDanach tritt im journalctl keine Fehlermeldung auf.
Normalerweise tritt der Fehler nur nach einem Update eines Adapters auf.Nebeninfo: Mein User "boehserwolf" hat die Datei iobroker_completions im home directory:
boehserwolf@iobroker:~:$ cat ~/.iobroker/iobroker_completions iobroker_yargs_completions() { local cur_word args type_list cur_word="${COMP_WORDS[COMP_CWORD]}" args=("${COMP_WORDS[@]}") # ask yargs to generate completions. type_list=$(iobroker --get-yargs-completions "${args[@]}") COMPREPLY=( $(compgen -W "${type_list}" -- ${cur_word}) ) # if no match was found, fall back to filename completion if [ ${#COMPREPLY[@]} -eq 0 ]; then COMPREPLY=() fi return 0 } complete -o default -F iobroker_yargs_completions iobroker complete -o default -F iobroker_yargs_completions iob -
@boehserwolf sagte in journalctl getcwd() failed: No such file or directory:
Nebeninfo: Mein User "boehserwolf" hat die Datei iobroker_completions im home directory
So soll es sein.
-
Die Summary ist soweit i. O.
Steht in der Langfassung vielleicht noch was drin? -
@thomas-braun
Beim Überfliegen würde ich gefühlt nein sagen - aber sieh selbst:Skript v.2023-04-16 *** BASE SYSTEM *** Architecture : x86_64 Docker : false Virtualization : lxc Distributor ID: Debian Description: Debian GNU/Linux 11 (bullseye) Release: 11 Codename: bullseye PRETTY_NAME="Debian GNU/Linux 11 (bullseye)" NAME="Debian GNU/Linux" VERSION_ID="11" VERSION="11 (bullseye)" VERSION_CODENAME=bullseye ID=debian HOME_URL="https://www.debian.org/" SUPPORT_URL="https://www.debian.org/support" BUG_REPORT_URL="https://bugs.debian.org/" Systemuptime and Load: 12:10:29 up 17 days, 22:50, 0 users, load average: 0.18, 0.24, 0.26 CPU threads: 2 *** Time and Time Zones *** Local time: Thu 2023-06-01 12:10:29 CEST Universal time: Thu 2023-06-01 10:10:29 UTC RTC time: n/a Time zone: Europe/Berlin (CEST, +0200) System clock synchronized: no NTP service: inactive RTC in local TZ: no *** User and Groups *** boehserwolf /home/boehserwolf boehserwolf sudo iobroker *** X-Server-Setup *** X-Server: false Desktop: Terminal: tty Boot Target: graphical.target *** MEMORY *** total used free shared buff/cache available Mem: 4.1G 1.7G 1.0G 0.0K 1.4G 2.4G Swap: 1.5G 0.0K 1.5G Total: 5.6G 1.7G 2.6G 4096 M total memory 1672 M used memory 634 M active memory 2174 M inactive memory 1019 M free memory 0 M buffer memory 1403 M swap cache 1536 M total swap 0 M used swap 1535 M free swap *** FILESYSTEM *** Filesystem Type Size Used Avail Use% Mounted on /dev/loop8 ext4 8.8G 6.3G 2.2G 75% / /dev/md0 ext4 7.3T 4.8T 2.4T 67% /mnt/backup_iobroker none tmpfs 492K 4.0K 488K 1% /dev tmpfs tmpfs 12G 0 12G 0% /dev/shm tmpfs tmpfs 4.7G 120K 4.7G 1% /run tmpfs tmpfs 5.0M 0 5.0M 0% /run/lock tmpfs tmpfs 2.4G 0 2.4G 0% /run/user/1000 Messages concerning ext4 filesystem in dmesg: [Sun May 14 13:18:32 2023] EXT4-fs (dm-0): mounted filesystem with ordered data mode. Opts: (null). Quota mode: none. [Sun May 14 13:18:32 2023] EXT4-fs (dm-0): re-mounted. Opts: errors=remount-ro. Quota mode: none. [Sun May 14 13:18:34 2023] EXT4-fs (dm-2): mounted filesystem with ordered data mode. Opts: errors=remount-ro. Quota mode: none. [Sun May 14 13:18:34 2023] EXT4-fs (md0): mounted filesystem with ordered data mode. Opts: errors=remount-ro,commit=120. Quota mode: none. [Sun May 14 13:18:58 2023] EXT4-fs (loop0): mounted filesystem with ordered data mode. Opts: (null). Quota mode: none. [Sun May 14 13:19:03 2023] EXT4-fs (loop1): mounted filesystem with ordered data mode. Opts: (null). Quota mode: none. [Sun May 14 13:19:09 2023] EXT4-fs (loop2): mounted filesystem with ordered data mode. Opts: (null). Quota mode: none. [Sun May 14 13:19:15 2023] EXT4-fs (loop3): mounted filesystem with ordered data mode. Opts: (null). Quota mode: none. [Sun May 14 13:19:20 2023] EXT4-fs (loop4): mounted filesystem with ordered data mode. Opts: (null). Quota mode: none. [Sun May 14 13:19:32 2023] EXT4-fs (loop5): mounted filesystem with ordered data mode. Opts: (null). Quota mode: none. [Sun May 14 13:19:37 2023] EXT4-fs (loop6): mounted filesystem with ordered data mode. Opts: (null). Quota mode: none. [Sun May 14 13:19:42 2023] EXT4-fs (loop7): mounted filesystem with ordered data mode. Opts: (null). Quota mode: none. [Sun May 14 13:19:56 2023] EXT4-fs (loop8): mounted filesystem with ordered data mode. Opts: (null). Quota mode: none. [Mon May 15 17:53:02 2023] EXT4-fs (sde1): mounted filesystem with ordered data mode. Opts: errors=remount-ro. Quota mode: none. Show mounted filesystems (real ones only): TARGET SOURCE FSTYPE OPTIONS / /dev/loop8 ext4 rw,relatime `-/mnt/backup_iobroker /dev/md0[/backup/servers/241_iobroker.wald/iobroker] ext4 rw,relatime,errors=remount-ro,commit=120 Files in neuralgic directories: /var: 718M /var/ 405M /var/log 404M /var/log/journal/10211f417bb24cb79e93cf70efeb0f05 404M /var/log/journal 214M /var/lib Hint: You are currently not seeing messages from other users and the system. Users in groups 'adm', 'systemd-journal' can see all messages. Pass -q to turn off this notice. Archived and active journals take up 32.0M in the file system. /opt/iobroker/backups: 188M /opt/iobroker/backups/ /opt/iobroker/iobroker-data: 541M /opt/iobroker/iobroker-data/ 299M /opt/iobroker/iobroker-data/files 175M /opt/iobroker/iobroker-data/backup-objects 72M /opt/iobroker/iobroker-data/files/telegram.admin 51M /opt/iobroker/iobroker-data/files/javascript.admin sort: write failed: 'standard output': Broken pipe sort: write error The five largest files in iobroker-data are: sort: write failed: 'standard output': Broken pipe sort: write error 33M /opt/iobroker/iobroker-data/files/devices.admin/static/js/main.10538062.js.map 22M /opt/iobroker/iobroker-data/states.jsonl 17M /opt/iobroker/iobroker-data/objects.jsonl 15M /opt/iobroker/iobroker-data/files/telegram.admin/rules/static/js/vendors-node_modules_iobroker_adapter-react-v5_assets_devices_parseNames_d_ts-node_modules_io-1d9f06.44fe4a3f.chunk.js.map 13M /opt/iobroker/iobroker-data/objects.json.migrated *** NodeJS-Installation *** /usr/bin/nodejs v16.20.0 /usr/bin/node v16.20.0 /usr/bin/npm 8.19.4 /usr/bin/npx 8.19.4 nodejs: Installed: 16.20.0-deb-1nodesource1 Candidate: 16.20.0-deb-1nodesource1 Version table: *** 16.20.0-deb-1nodesource1 500 500 https://deb.nodesource.com/node_16.x bullseye/main amd64 Packages 100 /var/lib/dpkg/status 12.22.12~dfsg-1~deb11u4 500 500 http://security.debian.org bullseye-security/updates/main amd64 Packages 12.22.12~dfsg-1~deb11u3 500 500 http://ftp.de.debian.org/debian bullseye/main amd64 Packages Temp directories causing npm8 problem: 0 No problems detected *** ioBroker-Installation *** ioBroker Status iobroker is running on this host. Objects type: jsonl States type: jsonl MULTIHOSTSERVICE/enabled: false Core adapters versions js-controller: 4.0.24 admin: 6.3.5 javascript: 6.1.4 Adapters from github: 0 Adapter State + system.adapter.admin.0 : admin : iobroker - enabled, port: 8081, bind: 0.0.0.0 (SSL), run as: admin system.adapter.admin.1 : admin : iobroker - disabled, port: 8089, bind: 0.0.0.0, run as: admin system.adapter.alarm.0 : alarm : iobroker - disabled system.adapter.alarm.1 : alarm : iobroker - disabled + system.adapter.backitup.0 : backitup : iobroker - enabled system.adapter.daswetter.0 : daswetter : iobroker - enabled + system.adapter.device-watcher.0 : device-watcher : iobroker - enabled system.adapter.devices.0 : devices : iobroker - enabled system.adapter.discovery.0 : discovery : iobroker - disabled system.adapter.dwd.0 : dwd : iobroker - enabled system.adapter.flot.0 : flot : iobroker - enabled + system.adapter.followthesun.0 : followthesun : iobroker - enabled + system.adapter.hm-rega.0 : hm-rega : iobroker - enabled + system.adapter.hm-rpc.0 : hm-rpc : iobroker - enabled, port: 0 + system.adapter.hm-rpc.1 : hm-rpc : iobroker - enabled, port: 0 + system.adapter.hue.0 : hue : iobroker - enabled, port: 443 system.adapter.ical.0 : ical : iobroker - enabled system.adapter.icons-mfd-svg.0 : icons-mfd-svg : iobroker - enabled + system.adapter.influxdb.0 : influxdb : iobroker - enabled, port: 8086 + system.adapter.info.0 : info : iobroker - enabled + system.adapter.javascript.0 : javascript : iobroker - enabled + system.adapter.mqtt.0 : mqtt : iobroker - enabled, port: 1883, bind: 0.0.0.0 + system.adapter.nut.0 : nut : iobroker - enabled + system.adapter.scenes.0 : scenes : iobroker - enabled + system.adapter.shelly.0 : shelly : iobroker - enabled, port: 1882, bind: 0.0.0.0 + system.adapter.simple-api.0 : simple-api : iobroker - enabled, port: 8087, bind: 0.0.0.0 (SSL), run as: admin + system.adapter.socketio.0 : socketio : iobroker - enabled, port: 8084, bind: 0.0.0.0, run as: admin + system.adapter.squeezeboxrpc.0 : squeezeboxrpc : iobroker - enabled, port: 9000 + system.adapter.statistics.0 : statistics : iobroker - enabled + system.adapter.telegram.0 : telegram : iobroker - enabled, port: 8443, bind: 0.0.0.0 + system.adapter.trashschedule.0 : trashschedule : iobroker - enabled system.adapter.vis-colorpicker.0 : vis-colorpicker : iobroker - enabled system.adapter.vis-history.0 : vis-history : iobroker - enabled system.adapter.vis-hqwidgets.0 : vis-hqwidgets : iobroker - enabled system.adapter.vis-jqui-mfd.0 : vis-jqui-mfd : iobroker - enabled system.adapter.vis-justgage.0 : vis-justgage : iobroker - enabled system.adapter.vis-metro.0 : vis-metro : iobroker - enabled system.adapter.vis-plumb.0 : vis-plumb : iobroker - enabled system.adapter.vis-timeandweather.0 : vis-timeandweather : iobroker - enabled system.adapter.vis-weather.0 : vis-weather : iobroker - enabled system.adapter.vis.0 : vis : iobroker - enabled + system.adapter.web.0 : web : iobroker - enabled, port: 8082, bind: 0.0.0.0, run as: admin + instance is alive Enabled adapters with bindings + system.adapter.admin.0 : admin : iobroker - enabled, port: 8081, bind: 0.0.0.0 (SSL), run as: admin + system.adapter.hm-rpc.0 : hm-rpc : iobroker - enabled, port: 0 + system.adapter.hm-rpc.1 : hm-rpc : iobroker - enabled, port: 0 + system.adapter.hue.0 : hue : iobroker - enabled, port: 443 + system.adapter.influxdb.0 : influxdb : iobroker - enabled, port: 8086 + system.adapter.mqtt.0 : mqtt : iobroker - enabled, port: 1883, bind: 0.0.0.0 + system.adapter.shelly.0 : shelly : iobroker - enabled, port: 1882, bind: 0.0.0.0 + system.adapter.simple-api.0 : simple-api : iobroker - enabled, port: 8087, bind: 0.0.0.0 (SSL), run as: admin + system.adapter.socketio.0 : socketio : iobroker - enabled, port: 8084, bind: 0.0.0.0, run as: admin + system.adapter.squeezeboxrpc.0 : squeezeboxrpc : iobroker - enabled, port: 9000 + system.adapter.telegram.0 : telegram : iobroker - enabled, port: 8443, bind: 0.0.0.0 + system.adapter.web.0 : web : iobroker - enabled, port: 8082, bind: 0.0.0.0, run as: admin ioBroker-Repositories Stable (default): http://download.iobroker.net/sources-dist.json Beta (latest) : http://download.iobroker.net/sources-dist-latest.json backup : http://download.iobroker.net/sources-dist.json Active repo(s): Stable (default) Installed ioBroker-Instances Used repository: Stable (default) Adapter "admin" : 6.3.5 , installed 6.3.5 Adapter "alarm" : 3.3.11 , installed 3.3.11 Adapter "backitup" : 2.6.19 , installed 2.6.19 Adapter "daswetter" : 3.1.8 , installed 3.1.8 Adapter "device-watcher": 2.9.1 , installed 2.9.1 Adapter "devices" : 1.1.2 , installed 1.1.2 Adapter "discovery" : 3.1.0 , installed 3.1.0 Adapter "dwd" : 2.8.3 , installed 2.8.3 Adapter "flot" : 1.11.0 , installed 1.11.0 Adapter "followthesun" : 0.4.1 , installed 0.4.1 Adapter "hm-rega" : 3.0.46 , installed 3.0.46 Adapter "hm-rpc" : 1.15.16 , installed 1.15.16 Adapter "hue" : 3.7.1 , installed 3.7.1 Adapter "ical" : 1.13.2 , installed 1.13.2 Adapter "icons-mfd-svg": 1.1.0 , installed 1.1.0 Adapter "influxdb" : 3.2.0 , installed 3.2.0 Adapter "info" : 1.9.26 , installed 1.9.26 Adapter "javascript" : 6.1.4 , installed 6.1.4 Controller "js-controller": 4.0.24 , installed 4.0.24 Adapter "mqtt" : 4.0.7 , installed 4.0.7 Adapter "nut" : 1.6.0 , installed 1.6.0 Adapter "scenes" : 2.3.9 , installed 2.3.9 Adapter "shelly" : 6.3.1 , installed 6.3.1 Adapter "simple-api" : 2.7.2 , installed 2.7.2 Adapter "socketio" : 4.2.0 , installed 4.2.0 Adapter "squeezeboxrpc": 1.3.9 , installed 1.3.10 Adapter "statistics" : 2.3.0 , installed 2.3.0 Adapter "telegram" : 1.15.2 , installed 1.15.2 Adapter "trashschedule": 2.2.0 , installed 2.2.0 Adapter "vis" : 1.4.16 , installed 1.4.16 Adapter "vis-colorpicker": 1.2.0 , installed 1.2.0 Adapter "vis-history" : 1.0.0 , installed 1.0.0 Adapter "vis-hqwidgets": 1.3.0 , installed 1.3.0 Adapter "vis-jqui-mfd" : 1.0.12 , installed 1.0.12 Adapter "vis-justgage" : 1.0.2 , installed 1.0.2 Adapter "vis-metro" : 1.2.0 , installed 1.2.0 Adapter "vis-plumb" : 1.0.2 , installed 1.0.2 Adapter "vis-timeandweather": 1.2.2, installed 1.2.2 Adapter "vis-weather" : 2.5.6 , installed 2.5.6 Adapter "web" : 4.3.0 , installed 4.3.0 Adapter "ws" : 1.3.0 , installed 1.3.0 Objects and States Please stand by - This may take a while Objects: 10104 States: 8915 *** OS-Repositories and Updates *** Hit:1 http://security.debian.org bullseye-security/updates InRelease Hit:2 http://ftp.de.debian.org/debian bullseye InRelease Hit:3 https://deb.nodesource.com/node_16.x bullseye InRelease Hit:4 http://ftp.de.debian.org/debian bullseye-updates InRelease Reading package lists... Pending Updates: 0 *** Listening Ports *** Active Internet connections (only servers) Proto Recv-Q Send-Q Local Address Foreign Address State User Inode PID/Program name tcp 0 0 127.0.0.1:25 0.0.0.0:* LISTEN 0 53405 369/master tcp 0 0 192.168.111.241:42010 0.0.0.0:* LISTEN 1001 128996644 3061972/io.hm-rpc.0 tcp 0 0 0.0.0.0:1882 0.0.0.0:* LISTEN 1001 128997699 3062077/io.shelly.0 tcp 0 0 127.0.0.1:9000 0.0.0.0:* LISTEN 1001 128992120 3061826/iobroker.js tcp 0 0 127.0.0.1:9001 0.0.0.0:* LISTEN 1001 128993221 3061826/iobroker.js tcp 0 0 0.0.0.0:111 0.0.0.0:* LISTEN 0 44004 175/portmap tcp 0 0 0.0.0.0:22 0.0.0.0:* LISTEN 0 53271 194/sshd: /usr/sbin tcp 0 0 0.0.0.0:8081 0.0.0.0:* LISTEN 1001 128992177 3061844/io.admin.0 tcp 0 0 0.0.0.0:8082 0.0.0.0:* LISTEN 1001 128996947 3062092/io.web.0 tcp 0 0 0.0.0.0:8084 0.0.0.0:* LISTEN 1001 128997078 3062122/io.socketio tcp 0 0 0.0.0.0:8087 0.0.0.0:* LISTEN 1001 129004784 3062730/io.simple-a tcp 0 0 192.168.111.241:49292 0.0.0.0:* LISTEN 1001 128997483 3061987/io.hm-rpc.1 udp 0 0 0.0.0.0:111 0.0.0.0:* 0 44003 175/portmap udp 0 0 0.0.0.0:33794 0.0.0.0:* 110 49618 84/avahi-daemon: ru udp 0 0 0.0.0.0:5353 0.0.0.0:* 110 49616 84/avahi-daemon: ru *** Log File - Last 25 Lines *** 2023-06-01 12:07:15.734 - info: javascript.0 (3061884) script.js.common.msgHandler.MessageStateCreator: [MessageStateCreator] postMessage('OUTDOOR_TEMP_HUM_INFO', '🌡️N/O: 12,4 / 14,0°C | 💦73,0%', 0) 2023-06-01 12:07:16.724 - info: influxdb.0 (3061911) Store 11 buffered influxDB history points 2023-06-01 12:07:31.680 - info: influxdb.0 (3061911) Store 11 buffered influxDB history points 2023-06-01 12:07:50.142 - info: influxdb.0 (3061911) Store 11 buffered influxDB history points 2023-06-01 12:08:11.179 - info: influxdb.0 (3061911) Store 11 buffered influxDB history points 2023-06-01 12:08:27.723 - info: influxdb.0 (3061911) Store 11 buffered influxDB history points 2023-06-01 12:08:31.111 - info: javascript.0 (3061884) script.js.common.msgHandler.MessageStateCreator: [MessageStateCreator] postMessage('OUTDOOR_TEMP_HUM_INFO', '🌡️N/O: 12,4 / 14,0°C | 💦73,0%', 0) 2023-06-01 12:08:52.439 - info: javascript.0 (3061884) script.js.common.system.checkHomematicServicemeldungen: Neue Servicemeldung: OG Mia Fenster (0007D8A9A5A8ED) --- HmIP-SRH--- Typ: LOW_BAT_ALARM --- Status: 1 Batterie niedrig 2023-06-01 12:08:52.495 - info: javascript.0 (3061884) script.js.common.msgHandler.MessageStateCreator: [MessageStateCreator] postMessage('BATTERIE_HMIP_WARN', 'HmIP Geräte mit (fast) leeren Batterien. Bitte kontrollieren und austauschen.', 0) 2023-06-01 12:08:52.502 - info: javascript.0 (3061884) script.js.common.msgHandler.MessageStateCreator: [MessageStateCreator] postMessage('CCU_HM_ERROR', 'Hm Geräte mit Fehlern. Aktuelle Meldung(en): OG.Mia.Fenster (0007D8A9A5A8ED) - Spannung Batterien/Akkus gering. 1x LR3/AAA --- seit: 01.06.23 12:08:49 Uhr', 0) 2023-06-01 12:08:53.940 - info: influxdb.0 (3061911) Store 11 buffered influxDB history points 2023-06-01 12:09:04.731 - info: influxdb.0 (3061911) Store 11 buffered influxDB history points 2023-06-01 12:09:16.677 - info: influxdb.0 (3061911) Store 11 buffered influxDB history points 2023-06-01 12:09:41.345 - info: influxdb.0 (3061911) Store 11 buffered influxDB history points 2023-06-01 12:09:43.485 - info: javascript.0 (3061884) script.js.common.msgHandler.MessageStateCreator: [MessageStateCreator] postMessage('OUTDOOR_TEMP_HUM_INFO', '🌡️N/O: 12,4 / 14,2°C | 💦73,0%', 0) 2023-06-01 12:09:50.933 - info: influxdb.0 (3061911) Store 11 buffered influxDB history points 2023-06-01 12:10:00.031 - info: host.iobroker instance system.adapter.dwd.0 started with pid 3112729 2023-06-01 12:10:00.656 - info: dwd.0 (3112729) Plugin sentry Sentry Plugin disabled for this process because sending of statistic data is disabled for the system 2023-06-01 12:10:00.811 - info: dwd.0 (3112729) starting. Version 2.8.3 in /opt/iobroker/node_modules/iobroker.dwd, node: v16.20.0, js-controller: 4.0.24 2023-06-01 12:10:01.196 - info: dwd.0 (3112729) Terminated (ADAPTER_REQUESTED_TERMINATION): Without reason 2023-06-01 12:10:01.723 - info: host.iobroker instance system.adapter.dwd.0 terminated with code 11 (ADAPTER_REQUESTED_TERMINATION) 2023-06-01 12:10:20.061 - info: influxdb.0 (3061911) Store 11 buffered influxDB history points 2023-06-01 12:10:31.586 - info: javascript.0 (3061884) script.js.common.msgHandler.MessageStateCreator: [MessageStateCreator] postMessage('OUTDOOR_TEMP_HUM_INFO', '🌡️N/O: 12,4 / 14,2°C | 💦73,0%', 0) 2023-06-01 12:10:35.458 - info: influxdb.0 (3061911) Store 11 buffered influxDB history points 2023-06-01 12:10:54.237 - info: influxdb.0 (3061911) Store 11 buffered influxDB history points -
@boehserwolf sagte in journalctl getcwd() failed: No such file or directory:
sort: write failed: 'standard output': Broken pipe
sort: write errorThe five largest files in iobroker-data are:
sort: write failed: 'standard output': Broken pipe
sort: write errorDas ist jedenfalls nicht normal.
-
@thomas-braun
Eher nicht. Ist mir zwar auch aufgefallen, habe mir das diag Script allerdings nicht näher angesehen. Werde mal das Netz durchwühlen. -
@thomas-braun
Hm bissl rumgewühlt.Im Script /home/iobroker/.diag.sh wird bspw. in Zeile 146 Folgendes aufgerufen:
sudo du -h /var/ | sort -rh | head -5;Rufe ich den Befehl nun per shell auf, erhalte ich:
boehserwolf@iobroker:~:$ sudo du -h /var/ | sort -rh | head -5; 718M /var/ 405M /var/log 404M /var/log/journal/10211f417bb24cb79e93cf70efeb0f05 404M /var/log/journal 214M /var/lib sort: fflush failed: 'standard output': Broken pipe sort: write errorOhne das "head -5" gibt es kein Problem.
Bissl googeln: https://unix.stackexchange.com/a/355164
Scheint bekanntes Verhalten zu sein, da sort noch zu viele Daten nachliefert.Das mag zwar ein Problem sein, aber vermutlich eher nicht meins.
