Restore auf neuem Raspberry
-
@tt-tom Hier?
Wie starte ich den Service neu? Kann ich auch den ganzen Raspberry neu starten?
-
@meister-mopper den API Key (heißt jetzt Service Account) hab ich neu angelegt und verknüpft. Scheint nun weiter zu gehen, leider klappt der Restore weiterhin nicht:
Started restore ... [DEBUG] [grafana] - Start Grafana Restore ... [DEBUG] [grafana] - filename for restore: /opt/iobroker/backups/grafana_2023_07_16-03_32_13_Eck29_backupiobroker.tar.gz [DEBUG] [grafana] - Grafana tmp directory created: /opt/iobroker/backups/grafana_tmp [DEBUG] [grafana] - start decompress [DEBUG] [grafana] - Grafana request started [DEBUG] [grafana] - Grafana is available ... Status: 200 [DEBUG] [grafana] - Try to Restore: /opt/iobroker/backups/grafana_tmp/datasource/InfluxDB.json [DEBUG] [grafana] - cannot restore datasource "InfluxDB": "data source with the same name already exists" [DEBUG] [grafana] - Try to Restore: /opt/iobroker/backups/grafana_tmp/dashboards/energieverbrauch.json [DEBUG] [grafana] - Try to Restore: /opt/iobroker/backups/grafana_tmp/dashboards/general-alerting.json [DEBUG] [grafana] - Try to Restore: /opt/iobroker/backups/grafana_tmp/dashboards/heizungsanlage.json [DEBUG] [grafana] - Try to Restore: /opt/iobroker/backups/grafana_tmp/dashboards/wetterdaten.json [DEBUG] [grafana] - dashboard restore for "wetterdaten" finish: {"id":1,"slug":"wetterdaten","status":"success","uid":"MyXZDlggk","url":"/d/MyXZDlggk/wetterdaten","version":3} [DEBUG] [grafana] - dashboard restore for "general-alerting" finish: {"id":2,"slug":"general-alerting","status":"success","uid":"XflZZbZRz","url":"/d/XflZZbZRz/general-alerting","version":3} [DEBUG] [grafana] - dashboard restore for "energieverbrauch" finish: {"id":4,"slug":"energieverbrauch","status":"success","uid":"QJpROlgRk","url":"/d/QJpROlgRk/energieverbrauch","version":3} [DEBUG] [grafana] - dashboard restore for "heizungsanlage" finish: {"id":3,"slug":"heizungsanlage","status":"success","uid":"BJK6AugRk","url":"/d/BJK6AugRk/heizungsanlage","version":3} [DEBUG] [grafana] - Grafana request ended [DEBUG] [grafana] - Try deleting the Grafana tmp directory [DEBUG] [grafana] - Grafana tmp directory was successfully deleted [DEBUG] [grafana] - Grafana Restore completed successfully [EXIT] Grafana restore done -
nein die Oberfläche von der InfluxDB -> ip-influx-server:8086
-
@tt-tom gibts bei mir anscheinend nicht. Ich glaub ich habe Influx ohne Weboberfläche installiert.
-
ich schieb das mal ins offTopic. hat ja mit iobroker selbst nichts zu tun.
-
@loverz welche Version hast Du den installiert ??
-
Ich denke ich brauche hier allgemeine Hilfe.
Wenn sich jemand offenbaren möchte, bitte per PN melden, dann kann vlt. jemand mit mir gegen nen Kasten Bier auf den Bildschirm schauen.Kann ja nicht so schwer sein ioBroker neu zu installieren und wieder zum laufen zu bekommen...
-
@tt-tom influxDB V1 nach dieser Anleitung:
https://rodnic.de/hausautomation/4-iobroker-influxdb-grafana/ -
-
@loverz sagte in Restore auf neuem Raspberry:
Kann ja nicht so schwer sein ioBroker neu zu installieren
@homoran sagte in Restore auf neuem Raspberry:
hat ja mit iobroker selbst nichts zu tun.
-
@thomas-braun
======== Start marking the full check here =========Skript v.2023-04-16 *** BASE SYSTEM *** Model : Raspberry Pi 4 Model B Rev 1.1 Architecture : aarch64 Docker : false Virtualization : none Distributor ID: Debian Description: Debian GNU/Linux 11 (bullseye) Release: 11 Codename: bullseye PRETTY_NAME="Debian GNU/Linux 11 (bullseye)" NAME="Debian GNU/Linux" VERSION_ID="11" VERSION="11 (bullseye)" VERSION_CODENAME=bullseye ID=debian HOME_URL="https://www.debian.org/" SUPPORT_URL="https://www.debian.org/support" BUG_REPORT_URL="https://bugs.debian.org/" Systemuptime and Load: 22:37:18 up 3:22, 1 user, load average: 0.00, 0.01, 0.00 CPU threads: 4 Raspberry only: throttled=0x0 Other values than 0x0 hint to temperature/voltage problems temp=49.1'C volt=0.8563V *** Time and Time Zones *** Local time: Sun 2023-07-16 22:37:18 CEST Universal time: Sun 2023-07-16 20:37:18 UTC RTC time: n/a Time zone: Europe/Berlin (CEST, +0200) System clock synchronized: yes NTP service: active RTC in local TZ: no *** User and Groups *** pi /home/pi pi adm dialout cdrom sudo audio video plugdev games users input render netdev gpio i2c spi iobroker *** X-Server-Setup *** X-Server: false Desktop: Terminal: tty Boot Target: multi-user.target *** MEMORY *** total used free shared buff/cache available Mem: 1.8G 573M 913M 1.0M 362M 1.2G Swap: 99M 0B 99M Total: 1.9G 573M 1.0G 1849 M total memory 573 M used memory 703 M active memory 136 M inactive memory 913 M free memory 35 M buffer memory 326 M swap cache 99 M total swap 0 M used swap 99 M free swap Raspberry only: oom events: 0 lifetime oom required: 0 Mbytes total time in oom handler: 0 ms max time spent in oom handler: 0 ms *** FILESYSTEM *** Filesystem Type Size Used Avail Use% Mounted on /dev/root ext4 117G 3.6G 109G 4% / devtmpfs devtmpfs 667M 0 667M 0% /dev tmpfs tmpfs 925M 0 925M 0% /dev/shm tmpfs tmpfs 370M 1.1M 369M 1% /run tmpfs tmpfs 5.0M 4.0K 5.0M 1% /run/lock /dev/mmcblk0p1 vfat 255M 31M 225M 13% /boot tmpfs tmpfs 185M 0 185M 0% /run/user/1000 Messages concerning ext4 filesystem in dmesg: [Sun Jul 16 19:14:48 2023] Kernel command line: coherent_pool=1M 8250.nr_uarts=0 snd_bcm2835.enable_headphones=0 snd_bcm2835.enable_headphones=1 snd_bcm2835.enable_hdmi=1 snd_bcm2835.enable_hdmi=0 smsc95xx.macaddr=DC:A6:32:43:7C:47 vc_mem.mem_base=0x3ec00000 vc_mem.mem_size=0x40000000 console=ttyS0,115200 console=tty1 root=PARTUUID=f60dec51-02 rootfstype=ext4 fsck.repair=yes rootwait [Sun Jul 16 19:14:49 2023] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Quota mode: none. [Sun Jul 16 19:14:49 2023] VFS: Mounted root (ext4 filesystem) readonly on device 179:2. [Sun Jul 16 19:14:51 2023] EXT4-fs (mmcblk0p2): re-mounted. Quota mode: none. Show mounted filesystems (real ones only): TARGET SOURCE FSTYPE OPTIONS / /dev/mmcblk0p2 ext4 rw,noatime,commit=600 `-/boot /dev/mmcblk0p1 vfat rw,relatime,fmask=0022,dmask=0022,codepage=437,iocharset=ascii,shortname=mixed,errors=remount-ro Files in neuralgic directories: /var: 608M /var/ 257M /var/cache 251M /var/cache/apt 160M /var/lib 151M /var/cache/apt/archives Archived and active journals take up 88.0M in the file system. /opt/iobroker/backups: 91M /opt/iobroker/backups/ /opt/iobroker/iobroker-data: 173M /opt/iobroker/iobroker-data/ 98M /opt/iobroker/iobroker-data/files 52M /opt/iobroker/iobroker-data/files/javascript.admin 34M /opt/iobroker/iobroker-data/files/javascript.admin/static 33M /opt/iobroker/iobroker-data/files/javascript.admin/static/js The five largest files in iobroker-data are: 36M /opt/iobroker/iobroker-data/objects.jsonl 9.5M /opt/iobroker/iobroker-data/states.jsonl 6.9M /opt/iobroker/iobroker-data/files/javascript.admin/static/js/610.312d98a8.chunk.js.map 6.3M /opt/iobroker/iobroker-data/files/admin.admin/custom/static/js/vendors-node_modules_iobroker_adapter-react-v5_assets_devices_parseNames_js-node_modules_iobr-99c23e.847b8ad9.chunk.js.map 5.9M /opt/iobroker/iobroker-data/files/javascript.admin/static/js/44.59b48e42.chunk.js.map *** NodeJS-Installation *** /usr/bin/nodejs v18.16.1 /usr/bin/node v18.16.1 /usr/bin/npm 9.5.1 /usr/bin/npx 9.5.1 nodejs: Installed: 18.16.1-deb-1nodesource1 Candidate: 18.16.1-deb-1nodesource1 Version table: *** 18.16.1-deb-1nodesource1 500 500 https://deb.nodesource.com/node_18.x bullseye/main arm64 Packages 100 /var/lib/dpkg/status 12.22.12~dfsg-1~deb11u4 500 500 http://security.debian.org/debian-security bullseye-security/main arm64 Packages 12.22.12~dfsg-1~deb11u3 500 500 http://deb.debian.org/debian bullseye/main arm64 Packages Temp directories causing npm8 problem: 0 No problems detected *** ioBroker-Installation *** ioBroker Status iobroker is running on this host. Objects type: jsonl States type: jsonl MULTIHOSTSERVICE/enabled: false Core adapters versions js-controller: 4.0.24 admin: 6.3.5 javascript: 7.0.3 Adapters from github: 0 Adapter State + system.adapter.admin.0 : admin : Eck29-ioBroker - enabled, port: 8081, bind: 0.0.0.0, run as: admin system.adapter.alexa2.0 : alexa2 : Eck29-ioBroker - disabled + system.adapter.backitup.0 : backitup : Eck29-ioBroker - enabled system.adapter.daswetter.0 : daswetter : Eck29-ioBroker - disabled system.adapter.deconz.0 : deconz : Eck29-ioBroker - disabled, port: 80 system.adapter.easee.0 : easee : Eck29-ioBroker - disabled system.adapter.ems-esp.0 : ems-esp : Eck29-ioBroker - disabled system.adapter.hmip.0 : hmip : Eck29-ioBroker - disabled system.adapter.hs100.0 : hs100 : Eck29-ioBroker - disabled system.adapter.hue.0 : hue : Eck29-ioBroker - disabled, port: 443 + system.adapter.influxdb.0 : influxdb : Eck29-ioBroker - enabled, port: 8086 system.adapter.info.0 : info : Eck29-ioBroker - disabled system.adapter.javascript.0 : javascript : Eck29-ioBroker - disabled system.adapter.km200.0 : km200 : Eck29-ioBroker - disabled system.adapter.knx.0 : knx : Eck29-ioBroker - disabled, bind: 192.168.1.166 system.adapter.mydlink.0 : mydlink : Eck29-ioBroker - disabled system.adapter.netatmo-crawler.0 : netatmo-crawler : Eck29-ioBroker - disabled system.adapter.philips-tv.0 : philips-tv : Eck29-ioBroker - disabled system.adapter.ping.0 : ping : Eck29-ioBroker - disabled system.adapter.rpi2.0 : rpi2 : Eck29-ioBroker - disabled system.adapter.shelly.0 : shelly : Eck29-ioBroker - disabled, port: 1882, bind: 192.168.1.166 system.adapter.solarmanpv.0 : solarmanpv : Eck29-ioBroker - disabled system.adapter.telegram.0 : telegram : Eck29-ioBroker - disabled, port: 8443, bind: 0.0.0.0 system.adapter.telegram.1 : telegram : Eck29-ioBroker - disabled, port: 8443, bind: 0.0.0.0 system.adapter.yahka.0 : yahka : Eck29-ioBroker - disabled system.adapter.yahka.3 : yahka : Eck29-ioBroker - disabled system.adapter.yeelight-2.0 : yeelight-2 : Eck29-ioBroker - disabled + instance is alive Enabled adapters with bindings + system.adapter.admin.0 : admin : Eck29-ioBroker - enabled, port: 8081, bind: 0.0.0.0, run as: admin + system.adapter.influxdb.0 : influxdb : Eck29-ioBroker - enabled, port: 8086 ioBroker-Repositories stable : http://download.iobroker.net/sources-dist.json beta : http://download.iobroker.net/sources-dist-latest.json latest : http://iobroker.live/repo/sources-dist-latest.json Active repo(s): stable Installed ioBroker-Instances Used repository: stable Adapter "admin" : 6.3.5 , installed 6.3.5 Adapter "alexa2" : 3.23.2 , installed 3.23.2 Adapter "backitup" : 2.6.23 , installed 2.6.23 Adapter "daswetter" : 3.1.8 , installed 3.1.8 Adapter "deconz" : 1.3.21 , installed 1.3.21 Adapter "easee" : 1.0.7 , installed 1.0.7 Adapter "ems-esp" : 1.30.0 , installed 1.30.0 Adapter "hmip" : 1.20.0 , installed 1.20.0 Adapter "hs100" : 2.1.2 , installed 2.1.2 Adapter "hue" : 3.9.3 , installed 3.9.3 Adapter "influxdb" : 3.2.0 , installed 3.2.0 Adapter "info" : 1.9.26 , installed 1.9.26 Adapter "javascript" : 7.0.3 , installed 7.0.3 Controller "js-controller": 4.0.24 , installed 4.0.24 Adapter "km200" : 2.0.3 , installed 2.0.3 Adapter "knx" : 2.0.17 , installed 2.0.18 Adapter "mydlink" : 1.3.1 , installed 1.3.1 Adapter "netatmo-crawler": 0.8.1 , installed 0.8.1 Adapter "philips-tv" : 0.5.3 , installed 0.5.3 Adapter "ping" : 1.5.3 , installed 1.5.3 Adapter "rpi2" : 1.3.2 , installed 1.3.2 Adapter "shelly" : 6.4.1 , installed 6.4.1 Adapter "solarmanpv" : 0.5.0 , installed 0.5.0 Adapter "telegram" : 1.15.6 , installed 1.15.6 Adapter "yahka" : 0.17.0 , installed 1.0.3 Adapter "yeelight-2" : 1.2.1 , installed 1.2.1 Objects and States Please stand by - This may take a while Objects: 10835 States: 8894 *** OS-Repositories and Updates *** W: GPG error: https://repos.influxdata.com/debian stretch InRelease: The following signatures couldn't be verified because the public key is not available: NO_PUBKEY D8FF8E1F7DF8B07E E: The repository 'https://repos.influxdata.com/debian stretch InRelease' is not signed. Pending Updates: 0 *** Listening Ports *** Active Internet connections (only servers) Proto Recv-Q Send-Q Local Address Foreign Address State User Inode PID/Program name tcp 0 0 0.0.0.0:22 0.0.0.0:* LISTEN 0 1976 520/sshd: /usr/sbin tcp 0 0 127.0.0.1:9001 0.0.0.0:* LISTEN 1001 11831 483/iobroker.js-con tcp 0 0 127.0.0.1:9000 0.0.0.0:* LISTEN 1001 13090 483/iobroker.js-con tcp 0 0 127.0.0.1:8088 0.0.0.0:* LISTEN 110 14143 482/influxd tcp6 0 0 :::3000 :::* LISTEN 111 17439 1086/grafana tcp6 0 0 :::8081 :::* LISTEN 1001 11971 718/io.admin.0 tcp6 0 0 :::8086 :::* LISTEN 110 13070 482/influxd tcp6 0 0 :::22 :::* LISTEN 0 1978 520/sshd: /usr/sbin udp 0 0 0.0.0.0:68 0.0.0.0:* 0 13075 1085/dhcpcd udp 0 0 0.0.0.0:33986 0.0.0.0:* 108 12956 365/avahi-daemon: r udp 0 0 0.0.0.0:5353 0.0.0.0:* 108 12954 365/avahi-daemon: r udp6 0 0 :::5353 :::* 108 12955 365/avahi-daemon: r udp6 0 0 :::546 :::* 0 15989 1085/dhcpcd udp6 0 0 :::33322 :::* 108 12957 365/avahi-daemon: r *** Log File - Last 25 Lines *** 2023-07-16 19:15:01.139 - info: admin.0 (718) Repository received successfully. 2023-07-16 19:15:04.078 - info: backitup.0 (849) starting. Version 2.6.23 in /opt/iobroker/node_modules/iobroker.backitup, node: v18.16.1, js-controller: 4.0.24 2023-07-16 19:15:04.231 - info: backitup.0 (849) [iobroker] backup will be activated at 03:30 every 1 day(s) 2023-07-16 19:15:06.143 - info: admin.0 (718) ==> Connected system.user.admin from ::ffff:192.168.1.152 2023-07-16 19:15:07.139 - info: admin.0 (718) ==> Connected system.user.admin from ::ffff:192.168.1.152 2023-07-16 19:15:29.199 - info: admin.0 (718) <== Disconnect system.user.admin from ::ffff:192.168.1.152 2023-07-16 19:15:29.219 - info: admin.0 (718) ==> Connected system.user.admin from ::ffff:192.168.1.152 2023-07-16 19:15:30.195 - info: admin.0 (718) <== Disconnect system.user.admin from ::ffff:192.168.1.152 admin 2023-07-16 19:15:30.241 - info: admin.0 (718) ==> Connected system.user.admin from ::ffff:192.168.1.152 2023-07-16 19:17:19.238 - info: admin.0 (718) <== Disconnect system.user.admin from ::ffff:192.168.1.152 2023-07-16 19:17:25.259 - info: admin.0 (718) <== Disconnect system.user.admin from ::ffff:192.168.1.152 admin 2023-07-16 19:17:29.372 - info: admin.0 (718) ==> Connected system.user.admin from ::ffff:192.168.1.152 2023-07-16 19:17:30.353 - info: admin.0 (718) ==> Connected system.user.admin from ::ffff:192.168.1.152 2023-07-16 19:19:32.882 - info: admin.0 (718) <== Disconnect system.user.admin from ::ffff:192.168.1.152 admin 2023-07-16 19:19:32.887 - info: admin.0 (718) <== Disconnect system.user.admin from ::ffff:192.168.1.152 2023-07-16 20:19:27.316 - info: admin.0 (718) ==> Connected system.user.admin from ::ffff:192.168.1.152 2023-07-16 20:19:27.344 - info: admin.0 (718) ==> Connected system.user.admin from ::ffff:192.168.1.152 2023-07-16 20:20:27.788 - info: admin.0 (718) <== Disconnect system.user.admin from ::ffff:192.168.1.152 2023-07-16 20:20:27.800 - info: admin.0 (718) <== Disconnect system.user.admin from ::ffff:192.168.1.152 admin 2023-07-16 20:20:27.931 - info: admin.0 (718) ==> Connected system.user.admin from ::ffff:192.168.1.152 2023-07-16 20:20:27.958 - info: admin.0 (718) ==> Connected system.user.admin from ::ffff:192.168.1.152 2023-07-16 20:21:27.915 - info: admin.0 (718) <== Disconnect system.user.admin from ::ffff:192.168.1.152 admin 2023-07-16 20:21:27.924 - info: admin.0 (718) <== Disconnect system.user.admin from ::ffff:192.168.1.152 2023-07-16 22:36:18.904 - info: admin.0 (718) ==> Connected system.user.admin from ::ffff:192.168.1.152 2023-07-16 22:36:18.967 - info: admin.0 (718) ==> Connected system.user.admin from ::ffff:192.168.1.152============ Mark until here for C&P =============
-
Wie vermutet. Das influx-Repo ist für 'stretch' angelegt, du fährst aber 'bullseye'. Und der key ist auch nicht richtig. Man buddelt auch keine mehrere Jahre alten Anleitungen aus dem Netz.
-
@thomas-braun okay, dann installiere ich alles nochmal neu und versuche eine neue Anleitung zu finden. Würde am liebsten gerne direkt influxDB v2 verwenden, aber das macht es wahrscheinlich noch komplexer.
Ist bei Grafana das gleiche Problem vorhanden, oder wieso stellt er die nicht wieder her? Oder meintest du dass der Grafana Key falsch ist?
-
Mach es so:
sudo rm /etc/apt/sources.list.d/infl* wget -q https://repos.influxdata.com/influxdata-archive_compat.key echo '393e8779c89ac8d958f81f942f9ad7fb82a25e133faddaf92e15b16e6ac9ce4c influxdata-archive_compat.key' | sha256sum -c && cat influxdata-archive_compat.key | gpg --dearmor | sudo tee /usr/share/keyrings/influxdata-archive_compat.gpg > /dev/null echo 'deb [signed-by=/usr/share/keyrings/influxdata-archive_compat.gpg] https://repos.influxdata.com/debian stable main' | sudo tee /etc/apt/sources.list.d/influxdata.list rm influxdata-archive_compat.key sudo apt update apt policy influx* -
@thomas-braun also komplett neu installieren und dann das hier ausführen?Danach dann den Restore von Backitup?
-
@loverz sagte in Restore auf neuem Raspberry:
also komplett neu installieren
Wer sagt denn das? Du sollst nur das falsche Repo da aus dem System kratzen.
-
@thomas-braun weil du meintest dass ich keine alten Anleitungen nutzen soll. Dachte das ist nun der aktuelle Befehl um Influx zu installieren.
Ich hab nun die Befehle von dir ausgeführt und danach nochmal des Restore probiert. Leider klappt es weiterhin nicht.
Diese Kommandozeile-Zeugs liegt mir einfach nicht. Ich hab da 0 Ahnung leider.
Hast du vielleicht die Tage mal Zeit mit mir zusammen den neuen Raspberry einzurichten? Am besten per Bildschirmfreigabe?
Ich brauche eigentlich nur einen neuen Raspberry mit:
-ioBroker
-InfluxDB (vielleicht gleich v2)
-Grafanaund die Datensicherungen davon.
Optional dann:
-Phoscon
-Homebridgeebenfalls mit Datensicherungen.
-
@loverz sagte in Restore auf neuem Raspberry:
Am besten per Bildschirmfreigabe?
Nein. Und schon gar nicht per Remote Desktop.
Was sagt denn nun
sudo apt update -
Hit:1 http://deb.debian.org/debian bullseye InRelease Hit:2 http://deb.debian.org/debian bullseye-updates InRelease Get:3 http://security.debian.org/debian-security bullseye-security InRelease [48.4 kB] Hit:4 http://archive.raspberrypi.org/debian bullseye InRelease Hit:5 https://deb.nodesource.com/node_18.x bullseye InRelease Hit:6 https://packages.grafana.com/oss/deb stable InRelease Hit:7 https://repos.influxdata.com/debian stable InRelease Fetched 48.4 kB in 2s (24.0 kB/s) Reading package lists... Done Building dependency tree... Done Reading state information... Done 1 package can be upgraded. Run 'apt list --upgradable' to see it. pi@Eck29-ioBroker:~ $ -
