Neuinstallation: Esp-Home kann nicht installiert werden
-
@wagner sagte in Neuinstallation: Esp-Home kann nicht installiert werden:
iob diag löscht den bildschirm bevor es summary anzeigt ..
aber nur wenn du den any key drückst
-
======== Start marking the full check here =========
Skript v.2023-10-10 *** BASE SYSTEM *** Static hostname: ras-ssd Icon name: computer Operating System: Raspbian GNU/Linux 10 (buster) Kernel: Linux 5.10.103-v7l+ Architecture: arm Model : Raspberry Pi 4 Model B Rev 1.1 Docker : false Virtualization : none Kernel : armv7l Userland : armhf Systemuptime and Load: 17:08:05 up 3 days, 14:02, 2 users, load average: 0.56, 0.67, 0.62 CPU threads: 4 *** RASPBERRY THROTTLING *** Current issues: No throttling issues detected. Previously detected issues: No throttling issues detected. *** Time and Time Zones *** Local time: Mon 2024-01-15 17:08:05 CET Universal time: Mon 2024-01-15 16:08:05 UTC RTC time: n/a Time zone: Europe/Berlin (CET, +0100) System clock synchronized: yes NTP service: active RTC in local TZ: no *** User and Groups *** pi /home/pi pi adm dialout cdrom sudo audio video plugdev games users input netdev gpio i2c spi iobroker *** X-Server-Setup *** X-Server: false Desktop: Terminal: tty Boot Target: graphical.target *** MEMORY *** total used free shared buff/cache available Mem: 3.8G 1.9G 237M 4.0M 1.7G 1.7G Swap: 99M 56M 43M Total: 3.9G 2.0G 281M 3837 M total memory 1941 M used memory 1007 M active memory 2466 M inactive memory 237 M free memory 142 M buffer memory 1515 M swap cache 99 M total swap 56 M used swap 43 M free swap Raspberry only: oom events: 0 lifetime oom required: 0 Mbytes total time in oom handler: 0 ms max time spent in oom handler: 0 ms *** FAILED SERVICES *** 0 loaded units listed. Pass --all to see loaded but inactive units, too. To show all installed unit files use 'systemctl list-unit-files'. *** FILESYSTEM *** Filesystem Type Size Used Avail Use% Mounted on /dev/root ext4 235G 19G 207G 9% / devtmpfs devtmpfs 1.8G 0 1.8G 0% /dev tmpfs tmpfs 1.9G 0 1.9G 0% /dev/shm tmpfs tmpfs 1.9G 8.5M 1.9G 1% /run tmpfs tmpfs 5.0M 4.0K 5.0M 1% /run/lock tmpfs tmpfs 1.9G 0 1.9G 0% /sys/fs/cgroup /dev/sda1 vfat 253M 49M 204M 20% /boot tmpfs tmpfs 384M 0 384M 0% /run/user/1000 Messages concerning ext4 filesystem in dmesg: [Fri Jan 12 03:05:34 2024] Kernel command line: coherent_pool=1M 8250.nr_uarts=0 snd_bcm2835.enable_compat_alsa=0 snd_bcm2835.enable_hdmi=1 smsc95xx.macaddr=DC:A6:32:58:F2:29 vc_mem.mem_base=0x3eb00000 vc_mem.mem_size=0x3ff00000 console=ttyS0,115200 console=tty1 root=PARTUUID=38fd7d31-02 rootfstype=ext4 elevator=deadline fsck.repair=yes rootwait [Fri Jan 12 03:05:36 2024] EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null) [Fri Jan 12 03:05:36 2024] VFS: Mounted root (ext4 filesystem) readonly on device 8:2. [Fri Jan 12 03:05:38 2024] EXT4-fs (sda2): re-mounted. Opts: (null) Show mounted filesystems \(real ones only\): TARGET SOURCE FSTYPE OPTIONS / /dev/sda2 ext4 rw,noatime |-/sys/fs/bpf none bpf rw,nosuid,nodev,noexec,relatime,mode=700 `-/boot /dev/sda1 vfat rw,relatime,fmask=0022,dmask=0022,codepage=437,iocharset=ascii,shortname=mixed,errors=remount-ro Files in neuralgic directories: /var: 3.0G /var/ 1.8G /var/cache/apt/archives 1.8G /var/cache/apt 1.8G /var/cache 1.1G /var/lib Archived and active journals take up 8.0M in the file system. /opt/iobroker/backups: 4.0K /opt/iobroker/backups/ /opt/iobroker/iobroker-data: 1.3G /opt/iobroker/iobroker-data/ 425M /opt/iobroker/iobroker-data/files 262M /opt/iobroker/iobroker-data/history 104M /opt/iobroker/iobroker-data/backup-objects 78M /opt/iobroker/iobroker-data/files/icons-open-icon-library-png The five largest files in iobroker-data are: 426M /opt/iobroker/iobroker-data/states.jsonl 35M /opt/iobroker/iobroker-data/files/devices.admin/static/js/main.24f2bb56.js.map 29M /opt/iobroker/iobroker-data/objects.jsonl 21M /opt/iobroker/iobroker-data/files/web.admin/static/js/main.aaea95f8.js.map 8.6M /opt/iobroker/iobroker-data/files/devices.admin/static/js/main.24f2bb56.js USB-Devices by-id: USB-Sticks - Avoid direct links to /dev/* in your adapter setups, please always prefer the links 'by-id': find: '/dev/serial/by-id/': No such file or directory *** NodeJS-Installation *** /usr/bin/nodejs v18.19.0 /usr/bin/node v18.19.0 /usr/bin/npm 10.2.3 /usr/bin/npx 10.2.3 /usr/bin/corepack 0.22.0 nodejs: Installed: 18.19.0-1nodesource1 Candidate: 18.19.0-1nodesource1 Version table: *** 18.19.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages 100 /var/lib/dpkg/status 18.18.2-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages 18.18.1-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages 18.18.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages 18.17.1-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages 18.17.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages 18.16.1-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages 18.16.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages 18.15.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages 18.14.2-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages 18.14.1-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages 18.14.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages 18.13.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages 18.12.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages 18.11.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages 18.10.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages 18.9.1-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages 18.9.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages 18.8.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages 18.7.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages 18.6.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages 18.5.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages 18.4.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages 18.3.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages 18.2.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages 18.1.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages 18.0.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages 10.24.0~dfsg-1~deb10u3 500 500 http://raspbian.raspberrypi.org/raspbian buster/main armhf Packages Temp directories causing npm8 problem: 0 No problems detected Errors in npm tree: *** ioBroker-Installation *** ioBroker Status iobroker is running on this host. Objects type: jsonl States type: jsonl Core adapters versions js-controller: 5.0.17 admin: 6.12.0 javascript: 7.1.6 Adapters from github: 1 Adapter State + system.adapter.accuweather.0 : accuweather : ras-ssd - enabled + system.adapter.admin.0 : admin : ras-ssd - enabled, port: 8081, bind: 0.0.0.0, run as: admin + system.adapter.backitup.0 : backitup : ras-ssd - enabled system.adapter.daswetter.0 : daswetter : ras-ssd - enabled + system.adapter.device-reminder.0 : device-reminder : ras-ssd - enabled system.adapter.devices.0 : devices : ras-ssd - disabled + system.adapter.discovery.0 : discovery : ras-ssd - enabled system.adapter.dwd.0 : dwd : ras-ssd - enabled system.adapter.esphome.0 : esphome : ras-ssd - enabled system.adapter.flot.0 : flot : ras-ssd - disabled + system.adapter.history.0 : history : ras-ssd - enabled + system.adapter.hmip.0 : hmip : ras-ssd - enabled system.adapter.ical.0 : ical : ras-ssd - enabled system.adapter.ical.1 : ical : ras-ssd - enabled system.adapter.icons-addictive-flavour-png.0: icons-addictive-flavour-png: ras-ssd - disabled system.adapter.icons-fatcow-hosting.0 : icons-fatcow-hosting : ras-ssd - disabled system.adapter.icons-icons8.0 : icons-icons8 : ras-ssd - disabled system.adapter.icons-mfd-png.0 : icons-mfd-png : ras-ssd - disabled system.adapter.icons-mfd-svg.0 : icons-mfd-svg : ras-ssd - disabled system.adapter.icons-open-icon-library-png.0: icons-open-icon-library-png: ras-ssd - disabled system.adapter.icons-ultimate-png.0 : icons-ultimate-png : ras-ssd - disabled + system.adapter.info.0 : info : ras-ssd - enabled + system.adapter.iqontrol.0 : iqontrol : ras-ssd - enabled + system.adapter.javascript.0 : javascript : ras-ssd - enabled + system.adapter.lovelace.0 : lovelace : ras-ssd - enabled, port: 8091, bind: 0.0.0.0, run as: admin + system.adapter.mqtt.0 : mqtt : ras-ssd - enabled, port: 1886, bind: 0.0.0.0 system.adapter.openweathermap.0 : openweathermap : ras-ssd - enabled system.adapter.schoolfree.0 : schoolfree : ras-ssd - enabled + system.adapter.shelly.0 : shelly : ras-ssd - enabled, port: 1882, bind: 0.0.0.0 + system.adapter.sonoff.0 : sonoff : ras-ssd - enabled, port: 1883, bind: 0.0.0.0 + system.adapter.sql.0 : sql : ras-ssd - enabled, port: 0 + system.adapter.tankerkoenig.0 : tankerkoenig : ras-ssd - enabled + system.adapter.telegram.0 : telegram : ras-ssd - enabled, port: 8443, bind: 0.0.0.0 system.adapter.text2command.0 : text2command : ras-ssd - disabled + system.adapter.tr-064.0 : tr-064 : ras-ssd - enabled system.adapter.vis-colorpicker.0 : vis-colorpicker : ras-ssd - disabled system.adapter.vis-hqwidgets.0 : vis-hqwidgets : ras-ssd - disabled system.adapter.vis-icontwo.0 : vis-icontwo : ras-ssd - disabled + system.adapter.vis-inventwo.0 : vis-inventwo : ras-ssd - enabled system.adapter.vis-jqui-mfd.0 : vis-jqui-mfd : ras-ssd - disabled system.adapter.vis-keyboard.0 : vis-keyboard : ras-ssd - disabled system.adapter.vis-material-advanced.0 : vis-material-advanced : ras-ssd - disabled system.adapter.vis-material.0 : vis-material : ras-ssd - disabled system.adapter.vis-materialdesign.0 : vis-materialdesign : ras-ssd - disabled system.adapter.vis-metro.0 : vis-metro : ras-ssd - disabled system.adapter.vis-players.0 : vis-players : ras-ssd - disabled system.adapter.vis-plumb.0 : vis-plumb : ras-ssd - disabled system.adapter.vis-rgraph.0 : vis-rgraph : ras-ssd - disabled system.adapter.vis-timeandweather.0 : vis-timeandweather : ras-ssd - disabled system.adapter.vis-weather.0 : vis-weather : ras-ssd - disabled system.adapter.vis.0 : vis : ras-ssd - enabled + system.adapter.web.0 : web : ras-ssd - enabled, port: 8082, bind: 0.0.0.0, run as: admin + instance is alive Enabled adapters with bindings + system.adapter.admin.0 : admin : ras-ssd - enabled, port: 8081, bind: 0.0.0.0, run as: admin + system.adapter.lovelace.0 : lovelace : ras-ssd - enabled, port: 8091, bind: 0.0.0.0, run as: admin + system.adapter.mqtt.0 : mqtt : ras-ssd - enabled, port: 1886, bind: 0.0.0.0 + system.adapter.shelly.0 : shelly : ras-ssd - enabled, port: 1882, bind: 0.0.0.0 + system.adapter.sonoff.0 : sonoff : ras-ssd - enabled, port: 1883, bind: 0.0.0.0 + system.adapter.sql.0 : sql : ras-ssd - enabled, port: 0 + system.adapter.telegram.0 : telegram : ras-ssd - enabled, port: 8443, bind: 0.0.0.0 + system.adapter.web.0 : web : ras-ssd - enabled, port: 8082, bind: 0.0.0.0, run as: admin ioBroker-Repositories Stable (default): http://download.iobroker.net/sources-dist.json Beta (latest) : http://download.iobroker.net/sources-dist-latest.json Active repo(s): Stable (default) Installed ioBroker-Instances Used repository: Stable (default) Adapter "accuweather" : 1.3.2 , installed 1.3.2 Adapter "admin" : 6.12.0 , installed 6.12.0 Adapter "backitup" : 2.9.8 , installed 2.8.7 [Updatable] Adapter "daswetter" : 3.1.12 , installed 3.1.11 [Updatable] Adapter "device-reminder": 3.0.0 , installed 3.0.0 Adapter "devices" : 1.1.5 , installed 1.1.5 Adapter "discovery" : 4.2.0 , installed 4.2.0 Adapter "dwd" : 2.8.5 , installed 2.8.5 Adapter "flot" : 1.12.0 , installed 1.12.0 Adapter "history" : 3.0.1 , installed 3.0.1 Adapter "hmip" : 1.21.0 , installed 1.20.0 [Updatable] Adapter "ical" : 1.13.3 , installed 1.13.3 Adapter "icons-addictive-flavour-png": 0.1.0, installed 0.1.0 Adapter "icons-fatcow-hosting": 0.1.0, installed 0.1.0 Adapter "icons-icons8" : 0.0.1 , installed 0.0.1 Adapter "icons-mfd-png": 1.2.1 , installed 1.2.1 Adapter "icons-mfd-svg": 1.2.0 , installed 1.2.0 Adapter "icons-open-icon-library-png": 0.1.2, installed 0.1.2 Adapter "icons-ultimate-png": 1.0.1, installed 1.0.1 Adapter "info" : 2.0.0 , installed 2.0.0 Adapter "iqontrol" : 2.3.0 , installed 2.3.0 Adapter "javascript" : 7.1.6 , installed 7.1.6 Controller "js-controller": 5.0.17 , installed 5.0.17 Adapter "lovelace" : 3.0.1 , installed 3.0.1 Adapter "mqtt" : 5.1.0 , installed 5.1.0 Adapter "openweathermap": 0.4.5 , installed 0.4.5 Adapter "schoolfree" : 1.1.3 , installed 1.1.3 Adapter "shelly" : 6.6.1 , installed 6.6.1 Adapter "simple-api" : 2.7.2 , installed 2.7.2 Adapter "socketio" : 6.6.0 , installed 6.6.0 Adapter "sonoff" : 3.0.3 , installed 3.0.3 Adapter "sql" : 2.2.0 , installed 2.2.0 Adapter "tankerkoenig" : 3.3.7 , installed 3.3.7 Adapter "telegram" : 3.0.1 , installed 3.0.1 Adapter "text2command" : 3.0.2 , installed 3.0.2 Adapter "tr-064" : 4.2.18 , installed 4.2.18 Adapter "vis" : 1.5.4 , installed 1.5.4 Adapter "vis-colorpicker": 2.0.3 , installed 2.0.3 Adapter "vis-hqwidgets": 1.4.0 , installed 1.4.0 Adapter "vis-icontwo" : 1.3.0 , installed 1.3.0 Adapter "vis-inventwo" : 3.3.3 , installed 3.3.3 Adapter "vis-jqui-mfd" : 1.0.12 , installed 1.0.12 Adapter "vis-keyboard" : 0.0.2 , installed 0.0.2 Adapter "vis-material" : 0.1.3 , installed 0.1.3 Adapter "vis-material-advanced": 1.7.4, installed 1.7.4 Adapter "vis-materialdesign": 0.5.9, installed 0.5.9 Adapter "vis-metro" : 1.2.0 , installed 1.2.0 Adapter "vis-players" : 0.1.6 , installed 0.1.6 Adapter "vis-plumb" : 1.0.2 , installed 1.0.2 Adapter "vis-rgraph" : 0.0.2 , installed 0.0.2 Adapter "vis-timeandweather": 1.2.2, installed 1.2.2 Adapter "vis-weather" : 2.5.6 , installed 2.5.6 Adapter "web" : 6.1.10 , installed 6.1.10 Adapter "wled" : 0.7.2 , installed 0.7.2 Adapter "ws" : 2.5.8 , installed 2.5.8 Objects and States Please stand by - This may take a while Objects: 12363 States: 11547 *** OS-Repositories and Updates *** W: Failed to fetch https://dl.yarnpkg.co/dists/m/debian/InRelease Could not resolve 'dl.yarnpkg.co' W: Some index files failed to download. They have been ignored, or old ones used instead. Err:1 https://dl.yarnpkg.co m/debian InRelease Could not resolve 'dl.yarnpkg.co' Hit:2 http://archive.raspberrypi.org/debian buster InRelease Hit:3 http://raspbian.raspberrypi.org/raspbian buster InRelease Hit:4 https://deb.nodesource.com/node_18.x nodistro InRelease Reading package lists... W: Failed to fetch https://dl.yarnpkg.co/dists/m/debian/InRelease Could not resolve 'dl.yarnpkg.co' W: Some index files failed to download. They have been ignored, or old ones used instead. Pending Updates: 0 *** Listening Ports *** Active Internet connections (only servers) Proto Recv-Q Send-Q Local Address Foreign Address State User Inode PID/Program name tcp 0 0 0.0.0.0:22 0.0.0.0:* LISTEN 0 15873 494/sshd tcp 0 0 0.0.0.0:1882 0.0.0.0:* LISTEN 1001 19224 974/io.shelly.0 tcp 0 0 0.0.0.0:1883 0.0.0.0:* LISTEN 1001 19245 989/io.sonoff.0 tcp 0 0 0.0.0.0:1886 0.0.0.0:* LISTEN 1001 17731 944/io.mqtt.0 tcp 0 0 0.0.0.0:1887 0.0.0.0:* LISTEN 1001 17732 944/io.mqtt.0 tcp 0 0 127.0.0.1:9000 0.0.0.0:* LISTEN 1001 17304 478/iobroker.js-con tcp 0 0 127.0.0.1:9001 0.0.0.0:* LISTEN 1001 16282 478/iobroker.js-con tcp6 0 0 :::8081 :::* LISTEN 1001 17624 814/io.admin.0 tcp6 0 0 :::8082 :::* LISTEN 1001 617402 27727/io.web.0 tcp6 0 0 :::21 :::* LISTEN 111 833028 3853/proftpd: (acce tcp6 0 0 :::22 :::* LISTEN 0 15875 494/sshd tcp6 0 0 :::8091 :::* LISTEN 1001 25633 1675/io.lovelace.0 tcp6 0 0 :::3306 :::* LISTEN 109 17089 573/mysqld udp 0 0 0.0.0.0:56231 0.0.0.0:* 108 14940 382/avahi-daemon: r udp 0 0 0.0.0.0:5678 0.0.0.0:* 1001 1579807 1092/io.discovery.0 udp 0 0 0.0.0.0:68 0.0.0.0:* 0 18505 414/dhcpcd udp 0 0 0.0.0.0:5353 0.0.0.0:* 108 14938 382/avahi-daemon: r udp6 0 0 :::546 :::* 0 16250 414/dhcpcd udp6 0 0 :::48713 :::* 108 14941 382/avahi-daemon: r udp6 0 0 :::5353 :::* 108 14939 382/avahi-daemon: r *** Log File - Last 25 Lines *** 2024-01-15 16:59:08.631 - info: javascript.0 (848) script.js.common.FensterOffen: TürHaustür wurde geschlossen. 2024-01-15 17:00:00.084 - info: host.ras-ssd instance system.adapter.dwd.0 started with pid 6178 2024-01-15 17:00:02.968 - info: dwd.0 (6178) starting. Version 2.8.5 in /opt/iobroker/node_modules/iobroker.dwd, node: v18.19.0, js-controller: 5.0.17 2024-01-15 17:00:04.106 - info: host.ras-ssd instance system.adapter.daswetter.0 started with pid 6193 2024-01-15 17:00:06.820 - info: daswetter.0 (6193) starting. Version 3.1.11 in /opt/iobroker/node_modules/iobroker.daswetter, node: v18.19.0, js-controller: 5.0.17 2024-01-15 17:00:06.856 - info: daswetter.0 (6193) Terminated (ADAPTER_REQUESTED_TERMINATION): All data handled, adapter stopped until next scheduled moment 2024-01-15 17:00:07.376 - info: daswetter.0 (6193) cleaned everything up... 2024-01-15 17:00:07.390 - info: host.ras-ssd instance system.adapter.daswetter.0 terminated with code 11 (ADAPTER_REQUESTED_TERMINATION) 2024-01-15 17:00:08.131 - info: host.ras-ssd instance system.adapter.ical.0 started with pid 6208 2024-01-15 17:00:10.586 - info: dwd.0 (6178) Terminated (ADAPTER_REQUESTED_TERMINATION): Without reason 2024-01-15 17:00:11.146 - info: host.ras-ssd instance system.adapter.dwd.0 terminated with code 11 (ADAPTER_REQUESTED_TERMINATION) 2024-01-15 17:00:11.288 - info: ical.0 (6208) starting. Version 1.13.3 in /opt/iobroker/node_modules/iobroker.ical, node: v18.19.0, js-controller: 5.0.17 2024-01-15 17:00:11.811 - info: ical.0 (6208) processing URL: Müll http://www.sbazv.de/entsorgungstermine/klein.ics?city=N 2024-01-15 17:00:12.144 - info: host.ras-ssd instance system.adapter.ical.1 started with pid 6223 2024-01-15 17:00:12.269 - info: ical.0 (6208) processing URL: GerdPrivat h 2024-01-15 17:00:18.099 - info: ical.0 (6208) Terminated (NO_ERROR): Without reason 2024-01-15 17:00:18.184 - info: ical.1 (6223) starting. Version 1.13.3 in /opt/iobroker/node_modules/iobroker.ical, node: v18.19.0, js-controller: 5.0.17 2024-01-15 17:00:18.640 - info: host.ras-ssd instance system.adapter.ical.0 terminated with code 0 (NO_ERROR) 2024-01-15 17:00:19.510 - info: ical.1 (6223) processing URL: Mondphasen http://mooncal.ch/mooncal.ics?lang=de&phases[full]=true&phases[new]=false&phases[quarter]=false&phases[daily]=true&events[lunareclipse]=true&events[solareclipse]=true&events[moonlanding]=false&before=P6M&after=P2Y&zone=CET 2024-01-15 17:00:25.474 - info: ical.1 (6223) Terminated (NO_ERROR): Without reason 2024-01-15 17:00:26.031 - info: host.ras-ssd instance system.adapter.ical.1 terminated with code 0 (NO_ERROR) 2024-01-15 17:05:00.825 - info: host.ras-ssd instance system.adapter.dwd.0 started with pid 6241 2024-01-15 17:05:03.827 - info: dwd.0 (6241) starting. Version 2.8.5 in /opt/iobroker/node_modules/iobroker.dwd, node: v18.19.0, js-controller: 5.0.17 2024-01-15 17:05:07.652 - info: dwd.0 (6241) Terminated (ADAPTER_REQUESTED_TERMINATION): Without reason 2024-01-15 17:05:08.214 - info: host.ras-ssd instance system.adapter.dwd.0 terminated with code 11 (ADAPTER_REQUESTED_TERMINATION)============ Mark until here for C&P =============
iob diag has finished.
MOD-EDIT: private Daten entfernt!
Press any key for a summary
-
Vermutlich ist deine Python-Version zu alt.
Da du aber ohnehin das ganze Ding am besten als 64Bit Raspberry OS 12 'Bookworm' Lite aufsetzen wirst gar kein Problem. Backup einspielen, fertig -
Python 2.7.16 (default, Sep 20 2023, 07:59:17)
pi@ras-ssd:~ $ python3
Python 3.7.3 (default, Oct 11 2023, 09:51:27)
[GCC 8.3.0] on linux -
Und aktuell sind wir bei Python 3.11/3.12
Und Debian/Raspberry OS 12. -
bei mir sehe ist ein "Python" 2.7.16 UND ein "Python3" 3.7.3. was mache ich damit?
-
@wagner sagte in Neuinstallation: Esp-Home kann nicht installiert werden:
was mache ich damit?
Nix. Du installierst da ein aktuell unterstütztes Betriebssystem neu.
-
aber danke 
-
@wagner sagte in Neuinstallation: Esp-Home kann nicht installiert werden:
@thomas-braun
aber danke Das ist keine einzige Schweißperle wert!
- Backup erstellen
- extern sichern
- Betriebssystem neu aufsetzen
- ioBroker mit dem Einzeiler incl. node und npm installieren
- Backup zurückspielen
feddisch!
-
etwas so: ==========================================================================
ioBroker was installed successfully Open http://192.168.178.96:8081 in a browser and start configuring!==========================================================================
You need to re-login before doing anything else on the console!
m2loft@ras4ssd:~ $ node -v
v18.19.0
m2loft@ras4ssd:~ $ npm -v
10.2.3
m2loft@ras4ssd:~ $ -
-
mein backup habe ich schon geladen ohne die inst. zu aktivieren...
======== Start marking the full check here =========Skript v.2023-10-10 *** BASE SYSTEM *** Static hostname: ras4ssd Icon name: computer Operating System: Debian GNU/Linux 12 (bookworm) Kernel: Linux 6.1.0-rpi7-rpi-v8 Architecture: arm64 Model : Raspberry Pi 4 Model B Rev 1.4 Docker : false Virtualization : none Kernel : aarch64 Userland : arm64 Systemuptime and Load: 23:09:11 up 1:56, 4 users, load average: 1.36, 1.51, 1.24 CPU threads: 4 *** RASPBERRY THROTTLING *** Current issues: No throttling issues detected. Previously detected issues: No throttling issues detected. *** Time and Time Zones *** Local time: Mon 2024-01-15 23:09:11 CET Universal time: Mon 2024-01-15 22:09:11 UTC RTC time: n/a Time zone: Europe/Berlin (CET, +0100) System clock synchronized: yes NTP service: active RTC in local TZ: no *** User and Groups *** m2loft /home/m2loft m2loft adm dialout cdrom sudo audio video plugdev games users input render netdev lpadmin gpio i2c spi *** X-Server-Setup *** X-Server: false Desktop: Terminal: tty Boot Target: graphical.target *** MEMORY *** total used free shared buff/cache available Mem: 8.2G 1.1G 2.6G 19M 4.7G 7.1G Swap: 104M 0B 104M Total: 8.3G 1.1G 2.7G 7810 M total memory 1010 M used memory 1753 M active memory 3141 M inactive memory 2431 M free memory 165 M buffer memory 4343 M swap cache 99 M total swap 0 M used swap 99 M free swap Raspberry only: oom events: 0 lifetime oom required: 0 Mbytes total time in oom handler: 0 ms max time spent in oom handler: 0 ms *** FAILED SERVICES *** UNIT LOAD ACTIVE SUB DESCRIPTION 0 loaded units listed. *** FILESYSTEM *** Filesystem Type Size Used Avail Use% Mounted on udev devtmpfs 3.6G 0 3.6G 0% /dev tmpfs tmpfs 782M 1.3M 780M 1% /run /dev/sda2 ext4 110G 6.8G 98G 7% / tmpfs tmpfs 3.9G 148K 3.9G 1% /dev/shm tmpfs tmpfs 5.0M 16K 5.0M 1% /run/lock /dev/sda1 vfat 510M 73M 438M 15% /boot/firmware tmpfs tmpfs 782M 40K 781M 1% /run/user/1000 Messages concerning ext4 filesystem in dmesg: [Mon Jan 15 21:12:24 2024] Kernel command line: coherent_pool=1M 8250.nr_uarts=0 snd_bcm2835.enable_headphones=0 snd_bcm2835.enable_headphones=1 snd_bcm2835.enable_hdmi=1 snd_bcm2835.enable_hdmi=0 smsc95xx.macaddr=DC:A6:32:D6:E2:01 vc_mem.mem_base=0x3eb00000 vc_mem.mem_size=0x3ff00000 console=ttyS0,115200 console=tty1 root=PARTUUID=a6d2155b-02 rootfstype=ext4 fsck.repair=yes rootwait quiet splash plymouth.ignore-serial-consoles cfg80211.ieee80211_regdom=DE [Mon Jan 15 21:12:27 2024] EXT4-fs (sda2): mounted filesystem with ordered data mode. Quota mode: none. [Mon Jan 15 21:12:28 2024] EXT4-fs (sda2): re-mounted. Quota mode: none. Show mounted filesystems \(real ones only\): TARGET SOURCE FSTYPE OPTIONS / /dev/sda2 ext4 rw,noatime |-/run/user/1000/doc portal fuse.portal rw,nosuid,nodev,relatime,user_id=1000,group_id=1000 `-/boot/firmware /dev/sda1 vfat rw,relatime,fmask=0022,dmask=0022,codepage=437,iocharset=ascii,shortname=mixed,errors=remount-ro Files in neuralgic directories: /var: 520M /var/ 191M /var/lib 188M /var/cache 181M /var/cache/apt 132M /var/lib/apt/lists Archived and active journals take up 39.9M in the file system. /opt/iobroker/backups: 4.0K /opt/iobroker/backups/ /opt/iobroker/iobroker-data: 407M /opt/iobroker/iobroker-data/ 367M /opt/iobroker/iobroker-data/files 78M /opt/iobroker/iobroker-data/files/icons-open-icon-library-png 67M /opt/iobroker/iobroker-data/files/javascript.admin 48M /opt/iobroker/iobroker-data/files/javascript.admin/static The five largest files in iobroker-data are: 35M /opt/iobroker/iobroker-data/files/devices.admin/static/js/main.24f2bb56.js.map 32M /opt/iobroker/iobroker-data/objects.jsonl 18M /opt/iobroker/iobroker-data/files/text2command.admin/static/js/main.274a4d8d.js.map 8.9M /opt/iobroker/iobroker-data/states.jsonl 8.6M /opt/iobroker/iobroker-data/files/devices.admin/static/js/main.24f2bb56.js USB-Devices by-id: USB-Sticks - Avoid direct links to /dev/* in your adapter setups, please always prefer the links 'by-id': find: '/dev/serial/by-id/': No such file or directory *** NodeJS-Installation *** /usr/bin/nodejs v18.19.0 /usr/bin/node v18.19.0 /usr/bin/npm 10.2.3 /usr/bin/npx 10.2.3 /usr/bin/corepack 0.22.0 nodejs: Installed: 18.19.0-1nodesource1 Candidate: 18.19.0-1nodesource1 Version table: 18.19.0+dfsg-6~deb12u1 500 500 http://deb.debian.org/debian-security bookworm-security/main arm64 Packages *** 18.19.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 100 /var/lib/dpkg/status 18.18.2-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.18.1-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.18.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.17.1-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.17.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.16.1-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.16.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.15.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.14.2-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.14.1-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.14.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.13.0+dfsg1-1 500 500 http://deb.debian.org/debian bookworm/main arm64 Packages 18.13.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.12.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.11.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.10.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.9.1-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.9.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.8.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.7.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.6.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.5.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.4.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.3.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.2.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.1.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.0.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages Temp directories causing npm8 problem: 0 No problems detected Errors in npm tree: *** ioBroker-Installation *** ioBroker Status iobroker is running on this host. Objects type: jsonl States type: jsonl Core adapters versions js-controller: 5.0.17 admin: 6.12.0 javascript: 7.1.6 Adapters from github: 1 Adapter State system.adapter.accuweather.0 : accuweather : ras4ssd - disabled + system.adapter.admin.0 : admin : ras4ssd - enabled, port: 8081, bind: 0.0.0.0, run as: admin + system.adapter.backitup.0 : backitup : ras4ssd - enabled system.adapter.daswetter.0 : daswetter : ras4ssd - disabled system.adapter.device-reminder.0 : device-reminder : ras4ssd - disabled system.adapter.devices.0 : devices : ras4ssd - disabled system.adapter.discovery.0 : discovery : ras4ssd - disabled system.adapter.dwd.0 : dwd : ras4ssd - disabled system.adapter.esphome.0 : esphome : ras4ssd - enabled system.adapter.flot.0 : flot : ras4ssd - disabled system.adapter.history.0 : history : ras4ssd - disabled system.adapter.hmip.0 : hmip : ras4ssd - disabled system.adapter.ical.0 : ical : ras4ssd - disabled system.adapter.ical.1 : ical : ras4ssd - disabled system.adapter.icons-addictive-flavour-png.0: icons-addictive-flavour-png: ras4ssd - disabled system.adapter.icons-fatcow-hosting.0 : icons-fatcow-hosting : ras4ssd - disabled system.adapter.icons-icons8.0 : icons-icons8 : ras4ssd - disabled system.adapter.icons-mfd-png.0 : icons-mfd-png : ras4ssd - disabled system.adapter.icons-mfd-svg.0 : icons-mfd-svg : ras4ssd - disabled system.adapter.icons-open-icon-library-png.0: icons-open-icon-library-png: ras4ssd - disabled system.adapter.icons-ultimate-png.0 : icons-ultimate-png : ras4ssd - disabled system.adapter.info.0 : info : ras4ssd - disabled system.adapter.iqontrol.0 : iqontrol : ras4ssd - disabled system.adapter.javascript.0 : javascript : ras4ssd - disabled system.adapter.lovelace.0 : lovelace : ras4ssd - disabled, port: 8091, bind: 0.0.0.0, run as: admin system.adapter.mqtt.0 : mqtt : ras4ssd - disabled, port: 1886, bind: 0.0.0.0 system.adapter.openweathermap.0 : openweathermap : ras4ssd - disabled system.adapter.schoolfree.0 : schoolfree : ras4ssd - disabled system.adapter.shelly.0 : shelly : ras4ssd - disabled, port: 1882, bind: 0.0.0.0 system.adapter.sonoff.0 : sonoff : ras4ssd - disabled, port: 1883, bind: 0.0.0.0 system.adapter.sql.0 : sql : ras4ssd - disabled, port: 0 system.adapter.tankerkoenig.0 : tankerkoenig : ras4ssd - disabled system.adapter.telegram.0 : telegram : ras4ssd - disabled, port: 8443, bind: 0.0.0.0 system.adapter.text2command.0 : text2command : ras4ssd - disabled system.adapter.tr-064.0 : tr-064 : ras4ssd - disabled system.adapter.vis-colorpicker.0 : vis-colorpicker : ras4ssd - disabled system.adapter.vis-hqwidgets.0 : vis-hqwidgets : ras4ssd - disabled system.adapter.vis-icontwo.0 : vis-icontwo : ras4ssd - disabled system.adapter.vis-inventwo.0 : vis-inventwo : ras4ssd - disabled system.adapter.vis-jqui-mfd.0 : vis-jqui-mfd : ras4ssd - disabled system.adapter.vis-keyboard.0 : vis-keyboard : ras4ssd - disabled system.adapter.vis-material-advanced.0 : vis-material-advanced : ras4ssd - disabled system.adapter.vis-material.0 : vis-material : ras4ssd - disabled system.adapter.vis-materialdesign.0 : vis-materialdesign : ras4ssd - disabled system.adapter.vis-metro.0 : vis-metro : ras4ssd - disabled system.adapter.vis-players.0 : vis-players : ras4ssd - disabled system.adapter.vis-plumb.0 : vis-plumb : ras4ssd - disabled system.adapter.vis-rgraph.0 : vis-rgraph : ras4ssd - disabled system.adapter.vis-timeandweather.0 : vis-timeandweather : ras4ssd - disabled system.adapter.vis-weather.0 : vis-weather : ras4ssd - disabled system.adapter.vis.0 : vis : ras4ssd - disabled system.adapter.web.0 : web : ras4ssd - disabled, port: 8082, bind: 0.0.0.0, run as: admin + instance is alive Enabled adapters with bindings + system.adapter.admin.0 : admin : ras4ssd - enabled, port: 8081, bind: 0.0.0.0, run as: admin ioBroker-Repositories Stable (default): http://download.iobroker.net/sources-dist.json Beta (latest) : http://download.iobroker.net/sources-dist-latest.json Active repo(s): Stable (default) Installed ioBroker-Instances Used repository: Stable (default) Adapter "accuweather" : 1.3.2 , installed 1.3.2 Adapter "admin" : 6.12.0 , installed 6.12.0 Adapter "backitup" : 2.9.8 , installed 2.8.7 [Updatable] Adapter "daswetter" : 3.1.12 , installed 3.1.11 [Updatable] Adapter "device-reminder": 3.0.0 , installed 3.0.0 Adapter "devices" : 1.1.5 , installed 1.1.5 Adapter "discovery" : 4.2.0 , installed 4.2.0 Adapter "dwd" : 2.8.5 , installed 2.8.5 Adapter "flot" : 1.12.0 , installed 1.12.0 Adapter "history" : 3.0.1 , installed 3.0.1 Adapter "hmip" : 1.21.0 , installed 1.20.0 [Updatable] Adapter "ical" : 1.13.3 , installed 1.13.3 Adapter "icons-addictive-flavour-png": 0.1.0, installed 0.1.0 Adapter "icons-fatcow-hosting": 0.1.0, installed 0.1.0 Adapter "icons-icons8" : 0.0.1 , installed 0.0.1 Adapter "icons-mfd-png": 1.2.1 , installed 1.2.1 Adapter "icons-mfd-svg": 1.2.0 , installed 1.2.0 Adapter "icons-open-icon-library-png": 0.1.2, installed 0.1.2 Adapter "icons-ultimate-png": 1.0.1, installed 1.0.1 Adapter "info" : 2.0.0 , installed 2.0.0 Adapter "iqontrol" : 2.3.0 , installed 2.3.0 Adapter "javascript" : 7.1.6 , installed 7.1.6 Controller "js-controller": 5.0.17 , installed 5.0.17 Adapter "lovelace" : 3.0.1 , installed 3.0.1 Adapter "mqtt" : 5.1.0 , installed 5.1.0 Adapter "openweathermap": 0.4.5 , installed 0.4.5 Adapter "schoolfree" : 1.1.3 , installed 1.1.3 Adapter "shelly" : 6.6.1 , installed 6.6.1 Adapter "sonoff" : 3.0.3 , installed 3.0.3 Adapter "sql" : 2.2.0 , installed 2.2.0 Adapter "tankerkoenig" : 3.3.7 , installed 3.3.7 Adapter "telegram" : 3.0.1 , installed 3.0.1 Adapter "text2command" : 3.0.2 , installed 3.0.2 Adapter "tr-064" : 4.2.18 , installed 4.2.18 Adapter "vis-colorpicker": 2.0.3 , installed 2.0.3 Adapter "vis-hqwidgets": 1.4.0 , installed 1.4.0 Adapter "vis-icontwo" : 1.3.0 , installed 1.3.0 Adapter "vis-inventwo" : 3.3.3 , installed 3.3.3 Adapter "vis-jqui-mfd" : 1.0.12 , installed 1.0.12 Adapter "vis-keyboard" : 0.0.2 , installed 0.0.2 Objects and States Please stand by - This may take a while Objects: 12374 States: 11357 *** OS-Repositories and Updates *** Hit:1 http://deb.debian.org/debian bookworm InRelease Hit:2 http://deb.debian.org/debian-security bookworm-security InRelease Hit:3 http://archive.raspberrypi.com/debian bookworm InRelease Hit:4 http://deb.debian.org/debian bookworm-updates InRelease Hit:5 https://deb.nodesource.com/node_18.x nodistro InRelease Reading package lists... Pending Updates: 85 *** Listening Ports *** Active Internet connections (only servers) Proto Recv-Q Send-Q Local Address Foreign Address State User Inode PID/Program name tcp 0 0 127.0.0.1:631 0.0.0.0:* LISTEN 0 17581 782/cupsd tcp 0 0 127.0.0.1:9000 0.0.0.0:* LISTEN 1001 62025 20856/iobroker.js-c tcp 0 0 127.0.0.1:9001 0.0.0.0:* LISTEN 1001 61080 20856/iobroker.js-c tcp 0 0 0.0.0.0:22 0.0.0.0:* LISTEN 0 17589 794/sshd: /usr/sbin tcp6 0 0 :::8081 :::* LISTEN 1001 62064 20881/io.admin.0 tcp6 0 0 ::1:631 :::* LISTEN 0 17580 782/cupsd tcp6 0 0 :::22 :::* LISTEN 0 17591 794/sshd: /usr/sbin udp 0 0 0.0.0.0:41069 0.0.0.0:* 104 16407 558/avahi-daemon: r udp 0 0 0.0.0.0:631 0.0.0.0:* 0 19626 1330/cups-browsed udp 0 0 0.0.0.0:5353 0.0.0.0:* 104 16405 558/avahi-daemon: r udp6 0 0 fe80::53d5:5df9:71e:546 :::* 0 34476 700/NetworkManager udp6 0 0 :::5353 :::* 104 16406 558/avahi-daemon: r udp6 0 0 :::55258 :::* 104 16408 558/avahi-daemon: r *** Log File - Last 25 Lines *** 2024-01-15 23:09:39.163 - info: host.ras4ssd iobroker npm-install: Installing iobroker.vis-keyboard@0.0.2... (System call) 2024-01-15 23:09:55.686 - info: host.ras4ssd iobroker npm-install: 2024-01-15 23:09:55.688 - info: host.ras4ssd iobroker npm-install: added 1 package in 16s276 packages are looking for funding run `npm fund` for details 2024-01-15 23:09:55.742 - info: host.ras4ssd iobroker npm-install: host.ras4ssd install adapter vis-keyboard@0.0.2 2024-01-15 23:09:55.856 - info: host.ras4ssd iobroker npm-install: upload [1] vis-keyboard.admin /opt/iobroker/node_modules/iobroker.vis-keyboard/admin/index.html index.html text/html 2024-01-15 23:09:55.990 - info: host.ras4ssd iobroker npm-install: upload [0] vis-keyboard.admin /opt/iobroker/node_modules/iobroker.vis-keyboard/admin/keyboard.png keyboard.png image/png 2024-01-15 23:09:56.021 - info: host.ras4ssd iobroker npm-install: INFO: Directory "/opt/iobroker/node_modules/iobroker.vis-keyboard/www" was not found! Nothing was uploaded or deleted. 2024-01-15 23:09:56.289 - info: host.ras4ssd iobroker npm-install: host.ras4ssd object system.adapter.vis-keyboard created/updated 2024-01-15 23:09:57.393 - info: host.ras4ssd iobroker npm-install: exit 0 2024-01-15 23:09:58.393 - warn: host.ras4ssd startInstance cannot find adapter "vis-material-advanced@1.7.4". Try to install it... 1 attempt 2024-01-15 23:09:58.394 - info: host.ras4ssd iobroker install vis-material-advanced@1.7.4 using installedFrom 2024-01-15 23:10:02.592 - info: host.ras4ssd iobroker npm-install: NPM version: 10.2.3 2024-01-15 23:10:02.596 - info: host.ras4ssd iobroker npm-install: Installing iobroker.vis-material-advanced@1.7.4... (System call) 2024-01-15 23:10:19.190 - info: host.ras4ssd iobroker npm-install: 2024-01-15 23:10:19.191 - info: host.ras4ssd iobroker npm-install: added 1 package in 16s276 packages are looking for funding run `npm fund` for details 2024-01-15 23:10:19.237 - info: host.ras4ssd iobroker npm-install: host.ras4ssd install adapter vis-material-advanced@1.7.4 2024-01-15 23:10:19.331 - info: host.ras4ssd iobroker npm-install: upload [1] vis-material-advanced.admin /opt/iobroker/node_modules/iobroker.vis-material-advanced/admin/vis-material-advanced.png vis-material-advanced.png image/png 2024-01-15 23:10:19.348 - info: host.ras4ssd iobroker npm-install: upload [0] vis-material-advanced.admin /opt/iobroker/node_modules/iobroker.vis-material-advanced/admin/words.js words.js application/javascript 2024-01-15 23:10:19.359 - info: host.ras4ssd iobroker npm-install: INFO: Directory "/opt/iobroker/node_modules/iobroker.vis-material-advanced/www" was not found! Nothing was uploaded or deleted. 2024-01-15 23:10:19.543 - info: host.ras4ssd iobroker npm-install: host.ras4ssd object system.adapter.vis-material-advanced created/updated 2024-01-15 23:10:20.673 - info: host.ras4ssd iobroker npm-install: exit 0 2024-01-15 23:10:21.673 - warn: host.ras4ssd startInstance cannot find adapter "vis-material@0.1.3". Try to install it... 1 attempt 2024-01-15 23:10:21.674 - info: host.ras4ssd iobroker install vis-material@0.1.3 using installedFrom 2024-01-15 23:10:25.903 - info: host.ras4ssd iobroker npm-install: NPM version: 10.2.3 2024-01-15 23:10:25.907 - info: host.ras4ssd iobroker npm-install: Installing iobroker.vis-material@0.1.3... (System call)============ Mark until here for C&P =============
iob diag has finished.
Press any key for a summary
Copy text starting here:
======================= SUMMARY ======================= v.2023-10-10 Static hostname: ras4ssd Icon name: computer Operating System: Debian GNU/Linux 12 (bookworm) Kernel: Linux 6.1.0-rpi7-rpi-v8 Architecture: arm64 Installation: native Kernel: aarch64 Userland: arm64 Timezone: Europe/Berlin (CET, +0100) User-ID: 1000 X-Server: false Boot Target: graphical.target Pending OS-Updates: 85 Pending iob updates: 3 Nodejs-Installation: /usr/bin/nodejs v18.19.0 /usr/bin/node v18.19.0 /usr/bin/npm 10.2.3 /usr/bin/npx 10.2.3 /usr/bin/corepack 0.22.0 Recommended versions are nodejs 18.19.0 and npm 10.2.3 Your nodejs installation is correct MEMORY: total used free shared buff/cache available Mem: 8.2G 1.1G 2.5G 19M 4.8G 7.1G Swap: 104M 0B 104M Total: 8.3G 1.1G 2.6G Active iob-Instances: 3 Active repo(s): Stable (default) ioBroker Core: js-controller 5.0.17 admin 6.12.0 ioBroker Status: iobroker is running on this host. Objects type: jsonl States type: jsonl Status admin and web instance: + system.adapter.admin.0 : admin : ras4ssd - enabled, port: 8081, bind: 0.0.0.0, run as: admin system.adapter.web.0 : web : ras4ssd - disabled, port: 8082, bind: 0.0.0.0, run as: admin Objects: 12374 States: 11357 Size of iob-Database: 32M /opt/iobroker/iobroker-data/objects.jsonl 8.9M /opt/iobroker/iobroker-data/states.jsonl =================== END OF SUMMARY ======================= Mark text until here for copying ===
m2loft@ras4ssd:~ $ -
@wagner sagte in Neuinstallation: Esp-Home kann nicht installiert werden:
boot.target auf multi-user setzen:
sudo systemctl set-default multi-user.targetPending Updates: 85
sudo apt update sudo apt full-upgrade sudo rebootUnd die drei Adapter Updates auch einspielen.
