[gelöst] Lampe nur einschalten wenn...

[mickym]

@matt77che

@matt77che sagte in Lampe nur einschalten wenn...:

Sonst jedoch nicht - Das Nachtlicht ist jedoch nicht der Datenpunkt "Licht im Wohnzimmer", sondern ein anderes.

Das spielt keine Rolle - es kommt true für Einschalten und false für Ausschalten aus dem Flow und das schickst Du dann in den Datenpunkt der das Nachtlicht ein-/ausschaltet.

[Matt77CHE]

@mickym

Es sind insgesamt drei Objekte

Ist dunkel?
Licht im Wohnzimmer
Nachtlicht > soll brennen wenn es dunkel ist und im Wohnzimmer kein Licht brennt

[mickym]

@matt77che Ja schon verstanden.

[Matt77CHE]

@mickym
genau

[Matt77CHE]

@mickym
für einen solchen Flow wäre ich dir dankbar

[mickym]

@matt77che

Hier zum Import - die Debug Nodes kannst natürlich wieder löschen - dienen nur zur Illustration. Ich habs mit einer Change Node direkt ohne switch Node gemacht.

Hier zum Import:

Spoiler

[
   {
       "id": "c6ef0f95e6107c9d",
       "type": "ioBroker in",
       "z": "289f539dcc33814e",
       "name": "Licht Wohnzimmer",
       "topic": "0_userdata.0.Test.Licht.an",
       "payloadType": "value",
       "onlyack": "",
       "func": "all",
       "gap": "",
       "fireOnStart": "true",
       "outFormat": "MQTT",
       "x": 3210,
       "y": 4380,
       "wires": [
           [
               "ce013750d76f19f2"
           ]
       ]
   },
   {
       "id": "02af5d243f1cdff2",
       "type": "ioBroker in",
       "z": "289f539dcc33814e",
       "name": "Ist es dunkel?",
       "topic": "0_userdata.0.Test.Licht.dunkel",
       "payloadType": "value",
       "onlyack": "",
       "func": "all",
       "gap": "",
       "fireOnStart": "true",
       "outFormat": "MQTT",
       "x": 3230,
       "y": 4440,
       "wires": [
           [
               "5441cb4d36c6c103"
           ]
       ]
   },
   {
       "id": "ce013750d76f19f2",
       "type": "change",
       "z": "289f539dcc33814e",
       "name": "verschiebe payload nach licht",
       "rules": [
           {
               "t": "move",
               "p": "payload",
               "pt": "msg",
               "to": "licht",
               "tot": "msg"
           }
       ],
       "action": "",
       "property": "",
       "from": "",
       "to": "",
       "reg": false,
       "x": 3470,
       "y": 4380,
       "wires": [
           [
               "435677eebedefdda"
           ]
       ]
   },
   {
       "id": "5441cb4d36c6c103",
       "type": "change",
       "z": "289f539dcc33814e",
       "name": "verschiebe payload nach dunkel",
       "rules": [
           {
               "t": "move",
               "p": "payload",
               "pt": "msg",
               "to": "dunkel",
               "tot": "msg"
           }
       ],
       "action": "",
       "property": "",
       "from": "",
       "to": "",
       "reg": false,
       "x": 3470,
       "y": 4440,
       "wires": [
           [
               "e4d5d47dbdc5a358"
           ]
       ]
   },
   {
       "id": "435677eebedefdda",
       "type": "ioBroker get",
       "z": "289f539dcc33814e",
       "name": "schaue, ob es dunkel ist",
       "topic": "0_userdata.0.Test.Licht.dunkel",
       "attrname": "dunkel",
       "payloadType": "value",
       "errOnInvalidState": "nothing",
       "x": 3750,
       "y": 4380,
       "wires": [
           [
               "44a0b5a56e945fe6"
           ]
       ]
   },
   {
       "id": "e4d5d47dbdc5a358",
       "type": "ioBroker get",
       "z": "289f539dcc33814e",
       "name": "schaue, ob Licht brennt",
       "topic": "0_userdata.0.Test.Licht.an",
       "attrname": "licht",
       "payloadType": "value",
       "errOnInvalidState": "nothing",
       "x": 3750,
       "y": 4440,
       "wires": [
           [
               "44a0b5a56e945fe6"
           ]
       ]
   },
   {
       "id": "8f61b42771a996bb",
       "type": "debug",
       "z": "289f539dcc33814e",
       "name": "Status der beiden Eigenschaften",
       "active": true,
       "tosidebar": true,
       "console": false,
       "tostatus": false,
       "complete": "{\t   \"Licht an\": licht,\t   \"Es ist dunkel\": dunkel\t}",
       "targetType": "jsonata",
       "statusVal": "",
       "statusType": "auto",
       "x": 4130,
       "y": 4340,
       "wires": []
   },
   {
       "id": "99f4d1cd12809cc2",
       "type": "change",
       "z": "289f539dcc33814e",
       "name": "Setze payload wenn dunkel und kein Licht",
       "rules": [
           {
               "t": "set",
               "p": "payload",
               "pt": "msg",
               "to": "$not(licht) and dunkel",
               "tot": "jsonata"
           }
       ],
       "action": "",
       "property": "",
       "from": "",
       "to": "",
       "reg": false,
       "x": 4140,
       "y": 4400,
       "wires": [
           [
               "f4bca42f9cbc2173",
               "c93a76d68ed1e296"
           ]
       ]
   },
   {
       "id": "f4bca42f9cbc2173",
       "type": "ioBroker out",
       "z": "289f539dcc33814e",
       "name": "Nachtlicht",
       "topic": "0_userdata.0.Test.Licht.Nachtlicht",
       "ack": "false",
       "autoCreate": "false",
       "stateName": "",
       "role": "",
       "payloadType": "",
       "readonly": "",
       "stateUnit": "",
       "stateMin": "",
       "stateMax": "",
       "x": 4400,
       "y": 4400,
       "wires": []
   },
   {
       "id": "c93a76d68ed1e296",
       "type": "debug",
       "z": "289f539dcc33814e",
       "name": "payload = Nachtlicht",
       "active": true,
       "tosidebar": true,
       "console": false,
       "tostatus": false,
       "complete": "payload",
       "targetType": "msg",
       "statusVal": "",
       "statusType": "auto",
       "x": 4440,
       "y": 4480,
       "wires": []
   },
   {
       "id": "44a0b5a56e945fe6",
       "type": "junction",
       "z": "289f539dcc33814e",
       "x": 3917,
       "y": 4403.5,
       "wires": [
           [
               "8f61b42771a996bb",
               "99f4d1cd12809cc2"
           ]
       ]
   }
]

Ausserdem habe ich versucht die Nodes entsprechend aussagekräftig zu benennen.

Die payload zum Schalten des Nachtlichts wird also direkt über die Verknüpfung der beiden Nachrichteneigenschaften dunkel und licht erstellt (die dann wenn licht aus und dunkel ist, true ist - sonst false).

Wenn Du kein JSONATA verwenden willst - sondern nur über die Logik der Nodes steuern willst dann musst Du halt in einzelne Nodes auflösen - nur zur Demo.

[Matt77CHE]

@mickym
super - vielen Dank dafür, funktioniert genau so wie es soll.

Schaue mir die einzelnen nodes noch an, wie du es gemacht hast & vielen Dank für deine Erklärungen!

[mickym]

@matt77che So falls Du kein JSONATA nutzen willst - hier mal eine Version - in der die Logik rein mit setzen der payload und filtern der verschiedenen Fälle über switch Nodes realisiert ist:

Auch hier habe ich versucht über die Namen, das einigermassen verständlich zu erklären
hier der Import:

Spoiler

[
   {
       "id": "c6ef0f95e6107c9d",
       "type": "ioBroker in",
       "z": "289f539dcc33814e",
       "name": "Licht Wohnzimmer",
       "topic": "0_userdata.0.Test.Licht.an",
       "payloadType": "value",
       "onlyack": "",
       "func": "all",
       "gap": "",
       "fireOnStart": "true",
       "outFormat": "MQTT",
       "x": 2950,
       "y": 4360,
       "wires": [
           [
               "ce013750d76f19f2"
           ]
       ]
   },
   {
       "id": "02af5d243f1cdff2",
       "type": "ioBroker in",
       "z": "289f539dcc33814e",
       "name": "Ist es dunkel?",
       "topic": "0_userdata.0.Test.Licht.dunkel",
       "payloadType": "value",
       "onlyack": "",
       "func": "all",
       "gap": "",
       "fireOnStart": "true",
       "outFormat": "MQTT",
       "x": 2970,
       "y": 4440,
       "wires": [
           [
               "5441cb4d36c6c103"
           ]
       ]
   },
   {
       "id": "ce013750d76f19f2",
       "type": "change",
       "z": "289f539dcc33814e",
       "name": "verschiebe payload nach licht",
       "rules": [
           {
               "t": "move",
               "p": "payload",
               "pt": "msg",
               "to": "licht",
               "tot": "msg"
           }
       ],
       "action": "",
       "property": "",
       "from": "",
       "to": "",
       "reg": false,
       "x": 3210,
       "y": 4360,
       "wires": [
           [
               "435677eebedefdda"
           ]
       ]
   },
   {
       "id": "5441cb4d36c6c103",
       "type": "change",
       "z": "289f539dcc33814e",
       "name": "verschiebe payload nach dunkel",
       "rules": [
           {
               "t": "move",
               "p": "payload",
               "pt": "msg",
               "to": "dunkel",
               "tot": "msg"
           }
       ],
       "action": "",
       "property": "",
       "from": "",
       "to": "",
       "reg": false,
       "x": 3210,
       "y": 4440,
       "wires": [
           [
               "e4d5d47dbdc5a358"
           ]
       ]
   },
   {
       "id": "435677eebedefdda",
       "type": "ioBroker get",
       "z": "289f539dcc33814e",
       "name": "schaue, ob es dunkel ist",
       "topic": "0_userdata.0.Test.Licht.dunkel",
       "attrname": "dunkel",
       "payloadType": "value",
       "errOnInvalidState": "nothing",
       "x": 3490,
       "y": 4360,
       "wires": [
           [
               "44a0b5a56e945fe6"
           ]
       ]
   },
   {
       "id": "e4d5d47dbdc5a358",
       "type": "ioBroker get",
       "z": "289f539dcc33814e",
       "name": "schaue, ob Licht brennt",
       "topic": "0_userdata.0.Test.Licht.an",
       "attrname": "licht",
       "payloadType": "value",
       "errOnInvalidState": "nothing",
       "x": 3490,
       "y": 4440,
       "wires": [
           [
               "44a0b5a56e945fe6"
           ]
       ]
   },
   {
       "id": "f4bca42f9cbc2173",
       "type": "ioBroker out",
       "z": "289f539dcc33814e",
       "name": "Nachtlicht",
       "topic": "0_userdata.0.Test.Licht.Nachtlicht",
       "ack": "false",
       "autoCreate": "false",
       "stateName": "",
       "role": "",
       "payloadType": "",
       "readonly": "",
       "stateUnit": "",
       "stateMin": "",
       "stateMax": "",
       "x": 4760,
       "y": 4380,
       "wires": []
   },
   {
       "id": "c93a76d68ed1e296",
       "type": "debug",
       "z": "289f539dcc33814e",
       "name": "payload = Nachtlicht",
       "active": true,
       "tosidebar": true,
       "console": false,
       "tostatus": false,
       "complete": "payload",
       "targetType": "msg",
       "statusVal": "",
       "statusType": "auto",
       "x": 4800,
       "y": 4440,
       "wires": []
   },
   {
       "id": "cbb5a412bcf60ab0",
       "type": "switch",
       "z": "289f539dcc33814e",
       "name": "Ist Licht an/aus?",
       "property": "licht",
       "propertyType": "msg",
       "rules": [
           {
               "t": "false"
           },
           {
               "t": "true"
           }
       ],
       "checkall": "true",
       "repair": false,
       "outputs": 2,
       "x": 3740,
       "y": 4400,
       "wires": [
           [
               "a501f770071798a7"
           ],
           [
               "9d5467df431a8fec"
           ]
       ]
   },
   {
       "id": "9d5467df431a8fec",
       "type": "change",
       "z": "289f539dcc33814e",
       "name": "Wenn Licht an - dann payload false",
       "rules": [
           {
               "t": "set",
               "p": "payload",
               "pt": "msg",
               "to": "false",
               "tot": "bool"
           }
       ],
       "action": "",
       "property": "",
       "from": "",
       "to": "",
       "reg": false,
       "x": 4480,
       "y": 4440,
       "wires": [
           [
               "f92109c326f3e098"
           ]
       ]
   },
   {
       "id": "a501f770071798a7",
       "type": "switch",
       "z": "289f539dcc33814e",
       "name": "Wenn Licht aus - dann prüfe ob dunkel ist?",
       "property": "dunkel",
       "propertyType": "msg",
       "rules": [
           {
               "t": "true"
           },
           {
               "t": "false"
           }
       ],
       "checkall": "true",
       "repair": false,
       "outputs": 2,
       "x": 4030,
       "y": 4360,
       "wires": [
           [
               "c4bbadd7a7b95d8d"
           ],
           [
               "0277bbdf129cf5ae"
           ]
       ]
   },
   {
       "id": "c4bbadd7a7b95d8d",
       "type": "change",
       "z": "289f539dcc33814e",
       "name": "Es ist dunkel und Licht ist aus, also payload = true",
       "rules": [
           {
               "t": "set",
               "p": "payload",
               "pt": "msg",
               "to": "true",
               "tot": "bool"
           }
       ],
       "action": "",
       "property": "",
       "from": "",
       "to": "",
       "reg": false,
       "x": 4430,
       "y": 4320,
       "wires": [
           [
               "f92109c326f3e098"
           ]
       ]
   },
   {
       "id": "0277bbdf129cf5ae",
       "type": "change",
       "z": "289f539dcc33814e",
       "name": "Es ist hell und Licht ist aus, also payload = false",
       "rules": [
           {
               "t": "set",
               "p": "payload",
               "pt": "msg",
               "to": "false",
               "tot": "bool"
           }
       ],
       "action": "",
       "property": "",
       "from": "",
       "to": "",
       "reg": false,
       "x": 4420,
       "y": 4380,
       "wires": [
           [
               "f92109c326f3e098"
           ]
       ]
   },
   {
       "id": "44a0b5a56e945fe6",
       "type": "junction",
       "z": "289f539dcc33814e",
       "x": 3640,
       "y": 4400,
       "wires": [
           [
               "cbb5a412bcf60ab0"
           ]
       ]
   },
   {
       "id": "f92109c326f3e098",
       "type": "junction",
       "z": "289f539dcc33814e",
       "x": 4660,
       "y": 4380,
       "wires": [
           [
               "c93a76d68ed1e296",
               "f4bca42f9cbc2173"
           ]
       ]
   }
]

[Matt77CHE]

@mickym

Vielen Dank - ist doch irgendwie ganz was anderes als die Blockly im Java-Scripte adapter

Danke dass du dir die Zeit genommen hast um mir weiterzuhelfen!

[mickym]

@matt77che Na ich hoffe Du bist positiv überzeugt. - Ich verstehe ja auch nicht, warum gerade Anfänger immer alle zum Puzzeln überredet werden.